Scribd Logo
Upload

Welcome to Scribd!

  • 12 views

    Pds-Foamglas One Block - en

    Uploaded by

    이선엽
    FOAMGLAS ONE cellular glass insulation is composed of millions of completely sealed glass cells formed into blocks. It is manufactured by Owens Corning to satisfy industrial and commercial insulation needs. It has properties such as being non-combustible, impermeable to water and vapor, chemically resistant, and providing constant insulating efficiency with long-term dimensional stability at service temperatures ranging from -265 to 430°C. Its thermal conductivity ranges from 0.020 to 0.107 W/(m·K) depending on temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pds-Foamglas One Block - en

    Uploaded by

    이선엽
    12 views2 pages
    FOAMGLAS ONE cellular glass insulation is composed of millions of completely sealed glass cells formed into blocks. It is manufactured by Owens Corning to satisfy industrial and commercial insulation needs. It has properties such as being non-combustible, impermeable to water and vapor, chemically resistant, and providing constant insulating efficiency with long-term dimensional stability at service temperatures ranging from -265 to 430°C. Its thermal conductivity ranges from 0.020 to 0.107 W/(m·K) depending on temperature.

    Original Title

    PDS-FOAMGLAS ONE BLOCK - EN

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    FOAMGLAS ONE cellular glass insulation is composed of millions of completely sealed glass cells formed into blocks. It is manufactured by Owens Corning to satisfy industrial and commercial insulation needs. It has properties such as being non-combustible, impermeable to water and vapor, chemically resistant, and providing constant insulating efficiency with long-term dimensional stability at service temperatures ranging from -265 to 430°C. Its thermal conductivity ranges from 0.020 to 0.107 W/(m·K) depending on temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    12 views2 pages

    Pds-Foamglas One Block - en

    Uploaded by

    이선엽
    FOAMGLAS ONE cellular glass insulation is composed of millions of completely sealed glass cells formed into blocks. It is manufactured by Owens Corning to satisfy industrial and commercial insulation needs. It has properties such as being non-combustible, impermeable to water and vapor, chemically resistant, and providing constant insulating efficiency with long-term dimensional stability at service temperatures ranging from -265 to 430°C. Its thermal conductivity ranges from 0.020 to 0.107 W/(m·K) depending on temperature.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    FOAMGLAS ONE CELLULAR GLASS INSULATION

    ® ™

    IN ACCORDANCE WITH EN 14305

    INSULATION FOAMGLAS® ONE™ insulation is a lightweight, rigid material composed


    of millions of completely sealed glass cells. It is manufactured by
    Owens Corning in a block form to satisfy a range of industrial and
    commercial insulation requirements.

    Features

    Non-combustible Impermeable to High compressive Nonabsorbent Corrosion/


    water and vapor strength chemical resistant

    Constant Easy to work Vermin Long term Ecological


    insulating with resistant dimensional
    efficiency stability

    Applications •• Cryogenic systems


    •• Low-temperature pipe, equipment, tanks and vessels
    •• Medium- and high-temperature pipes and equipment
    •• Hot oil and hot asphalt storage tanks
    •• Heat transfer fluid systems
    •• Hydrocarbon processing systems
    •• Chemical processing systems
    •• Steam and chilled water piping
    •• Commercial piping and ductwork
    •• Direct burial/underground

    Formats & Dimensions Length x Width (mm) 600 x 450


    Thickness (mm) 40 50 60 70 80 90 100 110
    Units per package 12 10 8 7 6 6 5 5
    Square metres (m²) 3.24 2.70 2.16 1.89 1.62 1.62 1.35 1.35

    Length x Width (mm) 600 x 450


    Thickness (mm) 120 130 140 150 160 170 180
    Units per package 4 4 4 3 3 3 3
    Square metres (m²) 1.08 1.08 1.08 0.81 0.81 0.81 0.81
    Other dimensions and thicknesses are available on request.

    Product Data Sheet | FOAMGLAS® ONE™ | November 2020


    General Product Characteristics
    PROPERTY TEST METHOD VALUE
    Composition – Soda-lime glass. Inorganic. No fibers or binders.
    Capillarity – Zero
    Hygroscopicity – Zero
    Specific Heat EN ISO 10456 1000 J/(kg·K)

    Physical and Thermal Characteristics in Accordance with EN 14305 1


    PROPERTY TEST METHOD DECLARED VALUE
    Thermal Conductivity EN ISO 13787 Refer to table down below
    Length EN 13467 600 mm ± 2 mm (other lengths following order)
    Width EN 822 ± 2 mm
    Thickness EN 823 ± 2 mm
    Squareness EN 13467 ± 3 mm
    Flatness EN 825 ± 2 mm
    Density (±15%) EN 1602 115 kg/m3
    Service Temperature EN 14706 -265 to +430 °C
    Combustibility EN 13501-1 Euroclass A1, Non-combustible
    Compressive Strength EN 826 Annexe A CS > 600 kPa
    Bending Strength EN 12089 BS ≥ 450 kPa
    Point Load EN 12430 PL ≤ 1.5 mm
    Tensile perpendicular to faces strength EN 1607 TR ≥ 150 kPa
    Compressive Creep EN 1606 CC (1.5/1/50) ≥ 225 kPa
    Water Vapor Resistance EN ISO 10456 μ=∞
    Water Absorption EN 1609 < 0.5 kg/m²
    Trace quantities of water soluble chloride EN 13468 CL ≤ 2 mg/kg

    Coefficient of Linear Above ambient temperatures: +25 to +300 °C: 9.0 x 10-6/K
    EN 13471
    Thermal Expansion Cryogenic temperatures: -170 to +25 °C: 6.6 x 10-6/K

    Thermal Conductivity (λ) Values at Select Mean Temperatures (EN ISO 13787)²

    TEMPERATURE °C -180 -150 -120 -80 -40 0 +40 +80 +120 +180 +240 +300

    THERMAL
    W/(m·K) 0.020 0.022 0.025 0.029 0.034 0.040 0.046 0.054 0.061 0.075 0.090 0.107
    CONDUCTIVITY (λ)

    1)
    CE-marking ensures conformity with the mandatory essential requirements of CPR as mentioned in EN 14305; within the CEN Keymark certification all mentioned
    characteristics are certified by an empowered, notified and accredited 3rd party.
    2)
    The values were determined by evaluating a polynomial at the insulation mean temperature. Contact Owens Corning for assistance applying our design polynomials to
    your application.

    The information contained in this Product Data Sheet is accurate and reliable to the best of our knowledge as of its date issued and is subject to change without prior notice. User must
    contact Pittsburgh Corning Europe NV (“PCE”) to verify correctness before specifying or ordering. No guarantee of accuracy is given or implied. This document supersedes and replaces
    all information supplied prior to the publication hereof. The provision of this information should not be construed as a recommendation to use any of our products, nor to use any of our
    products in violation of any patent rights or in breach of any statute or regulation. Since PCE has no control over installation workmanship, accessory materials or conditions of application,
    no express or implied warranty of any kind, including those of merchantability or fitness for a particular purpose or course of performance or usage of trade, is made as to the performance of
    an installation containing PCE products. User is solely responsible for determining whether a PCE product is fit for a particular purpose and suitable for user’s method of use or application.
    Given the variety of factors that can affect the use and application of a PCE product, some of which are uniquely within the user’s knowledge and control, it is essential that the user evaluates
    the PCE product to determine whether it is fit for a particular purpose and suitable for user’s method of use or application. Liability of PCE, if any, is strictly limited to replacement of product.
    In no event shall PCE be liable for any other damages arising because of product failure, whether incidental, special, consequential or punitive, regardless of the theory of liability upon which
    any such damages are claimed. PCE provides written warranties for many of its products, and such warranties take precedence over the statements contained herein.

    Industrial & Commercial Sales Technical Services


    Americas Americas & Asia-Pacific
    +1 800 327 6126 +1 800 327 6126
    [email protected]
    Asia-Pacific
    Singapore: +65 9635 9184 Europe, Middle East & Africa PITTSBURGH CORNING EUROPE NV
    China: +86 (0) 21 6101 7179 +32 13 611 468 ALBERTKADE 1, B-3980
    Japan: +81 3 6365 4307 [email protected] TESSENDERLO, BELGIUM
    Europe, Middle East & Africa +32 13 66 17 21
    +32 13 661 721
    For web-based Sales and Technical Service
    inquiries, please visit www.foamglas.com
    November 2020. Replaces Rev. 21.03.2013
    © 2020 Owens Corning. All Rights Reserved.

    You might also like