Scribd
Upload
46 views2 pages

Learning Module 02

This learning module describes how to connect hardware peripherals and a workstation to the internet. It has 4 learning outcomes: 1) confirming client requirements, 2) creating a document structure, 3) connecting hardware peripherals, and 4) connecting a workstation to the internet. The module contents go into details on identifying client requirements, obtaining and inventorying peripherals, installing and testing new peripherals, and establishing an internet connection by selecting a provider and connecting the workstation.

Uploaded by

bayush
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
46 views2 pages

Learning Module 02

This learning module describes how to connect hardware peripherals and a workstation to the internet. It has 4 learning outcomes: 1) confirming client requirements, 2) creating a document structure, 3) connecting hardware peripherals, and 4) connecting a workstation to the internet. The module contents go into details on identifying client requirements, obtaining and inventorying peripherals, installing and testing new peripherals, and establishing an internet connection by selecting a provider and connecting the workstation.

Uploaded by

bayush
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

LEARNING MODULE 02

TVET-PROGRAMME TITLE: Web Development and Database Administration Level I


MODULE TITLE: Connecting hardware peripherals

MODULE CODE: EIS WDDB1 M02 0622


NOMINAL DURATION: 40 Hours
MODULE DESCRIPTION: This module describes defines the competence required to connect
hardware peripherals according to instructions and a workstation or networked computer to the
internet.
LEARNING OUTCOMES
At the end of the module the trainee will be able to:
LO1. Confirm requirements of client
LO2. Create Document structure
LO3. Connect hardware peripherals
LO4. Connect workstation to the internet
MODULE CONTENTS:
LO1. Confirm Requirements of Client
1.1 Introduction to computer
1.1.1 Understanding history, generation and types of computers
1.1.2 Identifying and categorizing internal and external hardware components
1.1.3 Identifying and categorizing computer software
1.2 Help desk and maintenance practices
1.3 Organizational guidelines relating to external suppliers and vendors
1.4 Identifying and confirming client’s peripherals requirements
1.5 Documenting and reporting client requirements
1.6 Verifying client requirements
1.7 Taking action to ensure client support expectations
1.7.1 Vendor Warranty
1.7.2 Support Services

1
COMPLIED BY ICT DEPARTMENT 2022
LO2. Create Document structure
2.1 Obtaining peripherals
2.2 Entering peripherals into equipment inventory
2.3 Validating contents of delivered components and matching the packing list
2.4 Storing Peripherals according to vendor/manual guidelines
LO3. Connect hardware peripherals
3.1 Considering environmental and OHS standard
3.2 Verifying timeframe for installation
3.3 Removing and/or replacing old peripherals
3.4 Connecting new peripherals
3.5 Configuring operating system to accept the new peripherals
3.6 Testing and confirming hardware peripherals
LO4. Connect a workstation to the internet
4.1 Selecting and creating communication with ISP and telecom service organizations
4.2 Understanding ISP’s varying plans, technologies and services they offer
4.3 Connecting workstations to the internet
4.4 Launching internet browser software

2
COMPLIED BY ICT DEPARTMENT 2022

You might also like