The document provides information on exhibition hall design, including:
- Exhibition spaces should integrate indoor and outdoor areas to connect visitors with nature.
- Exhibition halls can be used for trade fairs, exhibits, conventions, and events.
- They include open-air and covered exhibition spaces. Open-air spaces must dedicate 30% to greenery and covered spaces have a height limit of 12 meters.
- Visitor flow, queuing, multiple entrances/exits, and orientation inside exhibitions are also addressed.
The document provides information on exhibition hall design, including:
- Exhibition spaces should integrate indoor and outdoor areas to connect visitors with nature.
- Exhibition halls can be used for trade fairs, exhibits, conventions, and events.
- They include open-air and covered exhibition spaces. Open-air spaces must dedicate 30% to greenery and covered spaces have a height limit of 12 meters.
- Visitor flow, queuing, multiple entrances/exits, and orientation inside exhibitions are also addressed.
The document provides information on exhibition hall design, including:
- Exhibition spaces should integrate indoor and outdoor areas to connect visitors with nature.
- Exhibition halls can be used for trade fairs, exhibits, conventions, and events.
- They include open-air and covered exhibition spaces. Open-air spaces must dedicate 30% to greenery and covered spaces have a height limit of 12 meters.
- Visitor flow, queuing, multiple entrances/exits, and orientation inside exhibitions are also addressed.
The document provides information on exhibition hall design, including:
- Exhibition spaces should integrate indoor and outdoor areas to connect visitors with nature.
- Exhibition halls can be used for trade fairs, exhibits, conventions, and events.
- They include open-air and covered exhibition spaces. Open-air spaces must dedicate 30% to greenery and covered spaces have a height limit of 12 meters.
- Visitor flow, queuing, multiple entrances/exits, and orientation inside exhibitions are also addressed.
HALL CASE STUDY INTRODUCTION The Exhibition Spaces are intended as a combination of indoor and open-air exhibition space in order to create a strong relation between covered and green open spaces through thematic content. The goal is to create an integrated expositive landscape and a Visitor Experience that immediately establishes a positive relationship between humankind and nature, creating a bridge between the content of the Event and the nature of exhibition spaces TABLE OF CONTENT
#1
USES OF #2 EXHIBITION HALL TYPES OF #3 EXHIBITION HALL
OPEN-AIR EXHIBITION SPACE TABLE OF CONTENT #6 DESIGN REQUIRMENT #5 S
#4 General guidelines
COVERED EXHIBITION SPACE The exhibition hall provides optimal conditions for
Trade fairs Exhibits Conventions
Events and galas
An exhibition hall can be
Open-air exhibition space
Covered exhibition space
OPEN-AIR EXHIBITION SPACE The landscape design shall be developed if keeping with the Theme and with the Participants approach to it. Like architecture, the landscape shall also help to tell intriguing stories about the pleasures of the table, delightful scents or strange and curious stories related to food cultivation and processing. The landscape has to document the most advanced research in the field of food production and the transformation of agricultural products. Countries will showcase their capabilities in food production, the biodiversity of their products, and their agricultural and food supply chains Open spaces A minimum of 30% of each lot must be dedicated to open areas and greenery. Excluding lot setbacks the Open-air Exhibition Space represents around 50% of each lot, where it is possible to build:
• Structures used for plants ensuring soil permeability
(e.g. trellises, pergolas, garden structures, planters). • Landscaping structure (e.g. structures used to retain soil or other materials, pools, exhibition structures, art works). COVERED EXHIBITION SPACE Covered Exhibition Spaces are buildings or enclosed structures containing exhibition areas or other spaces, including all overhanging upper floors or balconies. Participants may decide to build more than one level within the Covered part of the Exhibition Space, based on their individual needs. Height of Buildings • The height of the Covered part of Exhibition Space (or Building Height) must be less than 12 meters. • The height limit for any additional architectural elements ;such as skylight's, roof elements, vertical connections to the roof, sunscreens, signals, etc.) is 17 meters. Building Setbacks • The setback from the main boulevard must be no less than 10 meters, in order to Create a small square. • The distance between buildings and the side street shall be no less than 2 meters; there shall be no building concession directly to squares, greens', streets or public space's, without the 2 meters͛ setback. • The setback from the neighbouring lot shall be no less than 2 meters. • The distance between buildings shall comply with fire control requirments. Indoor exhibition and Flow management The indoor exhibition space design has to offer to visitors a full immersion in the Theme on the human scale with content presented at every moment of the visit. The visitor should be guided on a discovery of the exhibition content using the most innovative technology. The challenge lies in getting beyond the outdated paradigm of queues and visitor flows to create an efficient, dynamic and fluid experience. Entrance/Exit - Queue Management In order to enhance visitor ease and reduce queuing, the Organizer will set up a virtual queuing system to improve Level of Service (LOS) by reducing waiting time and optimizing the waiting areas of other uses. Building entrances and exits shall be designed taking into account the surrounding conditions and landscaping requirements. .
# Exhibition spaces may have multiple entrances/exits on
different sides of the lot. They must provide differentiated access for visitors, including disabled, special reserved visitors, reserved groups, workers and finally supplies/waste. # If a main entrance for the Exhibition Space is planned, it cannot give onto the Decumanus. This side of the lot may only have exits. The queuing area must not occupy or overflow onto the Decumanus.
Goods entrance and waste removal are planned during the
event closing hours and could be done by using all pedestrian access except the Decumanus area. General guidelines for planning all sorts of exhibitions can be summed up as: Visitors should be correctly 01 oriented inside the exhibition area.
Viewers should be able to move through
02 the exhibit without being forced to walk past objects they have already seen.
Adequate space should be provided for visitors to move
at different speeds. The circulation space should also 03 allow the visitor to take a quick look at the exhibits so that they can decide which ones to examine in detail
A viewer tends to turn clockwise upon entering
04 the exhibit area. Circulation pattern should be designed with this in mind. DESIGN REQUIREMENTS As reported in the International Participants Guide, Exhibition Spaces will be required to satisfy the 30% Rule i.e., they must have a minimum of 30% green and open areas.
The Lot Coverage Rate dictates that a maximum of 70% of the lot, excluding setbacks, may be occupied by buildings (to clarify this rule see the related Diagram at page 25). This includes any overhanging balconies or upper floors.
Minimum Lot 522 sqm
Maximum Lot 4,913 sqm Green and Open Areas minimum 30% of the lot Lot Coverage Rate up to 70% the lot excluding setback areas Building Height 12 meters maximum Restaurant and Commercial areas maximum 20% of the exhibition area THANKS Trade fairs Exhibits Events and galas Conventions Open-air exhibition space Covered exhibition space
