Rail Rack Matrix
Rail Rack Matrix
The information in this publication is provided “as is.” Dell Inc. makes no representations or warranties
of any kind with respect to the information in this publication, and specifically disclaims implied
warranties of merchantability or fitness for a particular purpose.
Use, copying, and distribution of any software described in this publication requires an applicable
software license.
This document may contain certain words that are not consistent with Dell's current language
guidelines. Dell plans to update the document over subsequent future releases to revise these words
accordingly.
This document may contain language from third party content that is not under Dell's control and is not
consistent with Dell's current guidelines for Dell's own content. When such third-party content is
updated by the relevant third parties, this document will be revised accordingly.
Copyright © December 2023 | Version 4.7 Dell Inc. or its subsidiaries. All Rights Reserved. Dell
Technologies, Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries.
Other trademarks may be trademarks of their respective owners.
Contents
Introduction ............................................................................................................ 1
Considerations.......................................................................................................... 1
Mounting interface .................................................................................................... 2
Rail types - System Installation Method ............................................................................ 3
Cable Management Solutions ......................................................................................... 4
Backwards compatibility .............................................................................................. 5
Self-Adjusting Slide Feature .......................................................................................... 7
Definitions - Reference for Table 2 ................................................................................. 8
Figures
Tables
Table 1. Dell Technologies server rails compatibility chart ................................................. 5
Table 2. DELL Technologies Rail Sizing Matrix ................................................................. 9
Table 3. Dell Technologies rack compatibility matrix ....................................................... 22
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Introduction
This document provides information about the mounting features and key dimensions of the rack rails used for mounting many
Dell Technologies™ enterprise systems and peripheral devices in a rack enclosure. This document also provides a compatibility
summary for select Dell Technologies racks as well as some common third-party racks. Note that the product list is not all-
inclusive and updates will be made as needed.
The dimensions provided in this document are for reference only. Some minor deviations due to manufacturing tolerances and
variances should be expected.
Dell Technologies rail kits may not be compatible with racks from other vendors, however, all Dell Technologies rail kits are
designed for compliance with all EIA-310-D and later revision specifications for 19-inch racks.
Considerations
Please pay attention to the footnotes indicated in the tables because they provide important information on using the rails in
different racks and circumstances.
It is assumed that rack mount peripherals and cable bundles do not protrude into the space directly behind the systems.
Note that Dell Technologies rail kits with a Rail Identifier code have been designed to be compliant with the Server System
Infrastructure (SSI) Specification for Computer Server Cabinet Enclosures & Racks, which specifies a minimum offset distance for
return flanges on the rack mounting flanges to allow sufficient room for mounting the rail kits, as indicated in Figure 1. For more
information about the Server System Infrastructure (SSI) Specification for Computer Server Cabinet Enclosures & Racks, see the
SSI Forum at ssiforum.org.
Some third-party racks may not meet this requirement, and although Dell Technologies has made extensive efforts to
accommodate as many third-party racks as possible, it is not feasible to provide a solution for every circumstance.
1
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Mounting interface
The ReadyRails™ II mounting interface supports tool-less installation in 4-post square-hole and unthreaded round-hole racks as
well as native support for tooled installation in threaded-hole racks. Note that installing this mounting interface in a square-hole
rack allows the bracket to be placed flush against the mounting post, while installation in a round-hole rack results in a slight
offset of approx. 6 mm from the mounting post, which also results in an approx. 6 mm bezel offset; refer to Figure 2.
6.1mm
The original ReadyRails mounting interface is used for both static and sliding rails, and it supports tool-less installation in 4-post
square-hole and unthreaded round-hole racks. Static ReadyRails kits also support tooled installation in threaded-hole racks and
2-post racks. When installed in unthreaded round-hole racks, the original ReadyRails will also have the 6 mm offset from the
mounting post that was discussed in the previous ReadyRails II paragraph. In order to install sliding ReadyRails kits into a
threaded-hole rack, adapter brackets are required. 1U and 2U adapter bracket kits are available that support systems ranging
from 1U to 5U in height.
The adapter bracket kits include six brackets to accommodate different rail lengths, plus four sets of custom screws in 10-32,
12-24, M5 and M6 thread sizes. The design of the brackets has been optimized to limit the forward shift of the system in the rack
to only 17.3 mm. Depending on the depth of the rack used and the position of the mounting rails within the rack, it may be
necessary to remove the system’s bezel in order to close the front door of the rack. For the front door to close with the system
2
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
bezel installed, a minimum clearance of 58 mm is needed between the back surface of the door panel and the front face of the
EIA flange.
The RapidRails™ mounting interface supports tool-less installation in 4-post square-hole racks only, while the VersaRails™
mounting interface supports tooled installation in 4-post square-hole and unthreaded round-hole racks. Mounting the VersaRails
in threaded-hole racks is not recommended and is not supported by Dell Technologies.
The Generic mounting interface encompasses all other mounting interfaces outside of the ones listed above. Unless indicated to
be tool-less, tools are required for installation.
A “drop-in” design means that the system is installed vertically into the rails by inserting the standoffs on the sides of the system
into the “J-slots” in the inner rail members with the rails in the fully extended position. The recommended method of
installation is to first insert the rear standoffs on the system into the rear J-slots on the rails to free up a hand and then rotate
the system down into the remaining J-slots while using the free hand to hold the rail against the side of the system.
A “stab-in” design means that the inner (chassis) rail members must first be attached to the sides of the system and then
inserted into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two
people perform this operation.
Sliding rails allow a system to be fully extended out of the rack for service. Most sliding rails support Cable Management Arms
(CMAs) which enable the system to be extended out of the rack without disconnecting data/power cables at the rear of the
system.
Unless otherwise indicated, all sliding rails are drop-in sliding rail design
Static rails typically do not support the ability to service the system in the rack and are not compatible with the CMA. However,
they do offer more flexibility in the types of racks and installations supported. Generally, there are two types of static rails:
stab-in static and L-bracket static.
3
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Stab-in static rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted
into the outer (cabinet) members installed in the rack. For systems that are 2U and larger, it is recommended that two people
perform this operation.
Stab-in Sliding rails require the inner (chassis) rail members must first be attached to the sides of the system and then inserted
into the outer (cabinet) members installed in the rack and allow a system to be portion extended out of the rack for service. For
systems that are 2U and larger, it is recommended that two people perform this operation. Most stab-in Sliding rails are
compatible with CMA and SRB solutions.
L-bracket static rails do not support the ability to fully extend a system out of the rack into a service position. These rails
typically are not compatible with cable management solutions unless otherwise indicated. Typically, equipment supported by L-
bracket are customer serviceable from the front or rear of the rack.
Cable management arm (CMA) is a cable management accessory which connects to the rails behind the system. It allows a fully
cabled system to be extended out of the rack into a service position.
Strain relief bar (SRB) is a cable management solution, which in most cases, attaches to the back of the rails via the strain relief
bar brackets. Cables from the back of the chassis are placed across the top of the SRB and secured by straps.
SRBs are offered for select systems as an optional method for managing cables at the rear of the system due to the potential of a
cable bundle size that exceeds the capacity of the CMA. The rail depth with a SRB is significantly less than that of a CMA, which
in many cases, enables fitment of the rails in shallow racks. Cable service loops are required for systems on sliding rails to fully
extend out of the rack for service.
Note that using a CMA or SRB with a deeper system may interfere with access to power distribution units (PDUs) in certain racks.
If a configuration does not require CMA support, then the outer CMA mounting brackets can be removed from some of the sliding
rail kits to reduce the overall length of the rails and eliminate potential interference with rear-mounted PDUs or the rack rear
door.
4
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Backwards compatibility
Some systems may offer backward compatibility with the rail kits from previous-generation systems. This is not always possible,
because changes to chassis features, dimensions or weight can prevent older rail kits from being used with newer systems. Please
refer to Table 1 for cross-generational compatibility of Dell Technologies servers and rails.
5
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
R750 ✓ ✓ ✓
R750xa N/A N/A N/A
6
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
R520 ✓ ✓ ✓
R620 X X X
R720/R720xd X X X
R820 X X N/A
R920 X X N/A
T320 ✓ (T610) ✓ (T610) N/A
T420 ✓ (T610) ✓ (T610) N/A
T620 ✓ ✓ N/A
The rail adjustability range when the rails are installed in a rack is the same regardless of system depth since the feature is not
utilized until a system is installed. If the system being installed in the rails requires this feature, the minimum rail adjustability
limit is increased by the amount of travel the slide body needs to slide back to support the system. The minimum rail
adjustability limit is documented in the resources listed at the end of this notice.
Users who have systems that utilize the feature might observe a slight amount of additional resistance from a spring in each rail
when the system is almost completely installed in the rack. For most rails, the instance when the resistance is observed is
within the final 55 mm of translation before the slam latch is engaged with the rail.
7
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
The rail slide-adjusting feature can be found on both sliding and drop-in/stab-in rail types. The rail adjustability range (mm)
values listed in Table 2 for products that utilize this rail feature have been flagged with a footnote.
Square-hole describes a 4-post rack mounting flange type where rails utilize Square holes sized according to EIA-310-D standard
for mounting.
Round-hole describes a 4-post rack mounting flange type where rails utilize Unthreaded-Round holes sized according to EIA-310-
D standard for mounting.
Threaded-hole describes a 4-post rack mounting flange type where rails utilize Threaded-round holes for mounting. Threaded-
round holes may require additional hardware for mounting and hardware may vary by thread type. See footnotes in table 2 for
specific information on threaded-round hole mounting.
Mounting interface describes the type of rail bracket design used for mounting the rail in the rack.
Rail adjustability range represents the allowable distance between the outside-facing surfaces of the front and rear mounting
posts of the rack when a system is fully installed. This does not include the portion of the rail kit or other rail components that
may extend beyond the mounting posts.
Rail depth represents the minimum depth of the rail as measured from the rack front mounting posts when the rail rear bracket
is positioned all the way forward. The rail may extend beyond the rear bracket, particularly for sliding rail kits to support CMA or
SRB attachment. In some instances, the chassis may extend beyond the minimum rail depth, and in such cases, please refer to
the footnotes in Table 2.
8
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
A7 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 720b 845
R320/R330/R420/R430
R620 (8-HDD) Stab-in
A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
R630 (8-HDD) Static
R640 (8-HDD) Generic Drop-in/ w
A10 ✓ ✓ ✓ X X 559 931 559 931 559 931 720b 845
Tool-less Stab-in
A7 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 681p 868 667p 861 681p 883 770b 895
R620 (10-HDD)
Stab-in
R630 (10/24-HDD) A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
R640 (4-HDD/10-HDD)
Generic Drop-in/ w
A10 ✓ ✓ ✓ X X 613p 931 613p 931 613p 931 770b 895
Tool-less Stab-in
PowerEdgeTM
862
R6525 (8-HDD) A15 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 862 631 884 736b
SERVRS
(770/792)
R650 (8-HDD)
Stab-in
R660/R6615/R6625 A14 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 880 594 870 605 893 622n -
Static
(0-HDD/8-HDD)
Generic Drop-in/ w 862
A16 ✓ ✓ ✓ X X 559 994 559 994 559 944 736b
Tool-less Stab-in (770/792)
913
A15 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 862 631 884 787b (821/843)
R6525 (4-HDD/10-HDD)
R650 (4-HDD/10-HDD) Stab-in
A14 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 880 594 870 605 893 622n -
R660/ R6615/R6625 Static
(4-HDD/10-HDD/E3/LO-Z) Generic Drop-in/ 913
A16 ✓ ✓ ✓ X X 610 994 610 994 610 994 787b
Tool-less Stab-in (821/843)
R340 (8-HDD) A12 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 720b 845
R350 (8-HDD)
R360 (8-HDD) Stab-in
A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
9
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
R340 (4-HDD) A12 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 681p 868 667p 861 681p 883 770b 895
R350 (4-HDD)
R360 (4-HDD) Stab-in
A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
R440 (8-HDD) Stab-in
R450 (8-HDD) A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
R6415 (8-HDD)
R6515 (8-HDD)
R650xs (0-HDD/8-HDD) Generic Drop-in/ w 845
A11 ✓ ✓ ✓ X X 559 931 559 931 559 931 720b
R660xs(0-HDD/8-HDD) Tool-less Stab-in (761/783)
B6 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 714b 845
R520/R530/R540/R540xd
R720/R720xd/R730/ Stab-in
R730xd/R740/R740xd/
B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
R7415/R7425/R7515 Generic Drop-in/
714b
w
B13 ✓ ✓ ✓ X X 559 931 559 931 559 931 845
Tool-less Stab-in
Stab-in
B20 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
R550 845
R750xs B21 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 714b (749/769)
R760xs
Generic Drop-in/ 845
B22 ✓ ✓ ✓ X X 559 931 559 931 559 931 714b
Tool-less Stab-in (749/769)
895
B6 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 685p 868 671p 861 685p 883 766b (802/822)
R7525 Stab-in
R750 B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 608 898 622n -
Static
Generic Drop-in/ 899
609p 609p 609p 779b
w
B13 ✓ ✓ ✓ X X 931 931 931
Tool-less Stab-in (802/822)
10
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
Stab-in
B20 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
R760
895
R7615 B21 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 685p 868 671p 861 685p 883 766b (802/822)
R7625
Generic Drop-in/ 895
B22 ✓ ✓ ✓ X X 609p 931 609p 931 609p 931 766b
Tool-less Stab-in (802/822)
Generic Drop-in/ w
B19 ✓ ✓ ✓ X X 607 919 607 919 607 919 895 (917/937)
Tool-less Stab-in
R750xa
Stab-in
B17 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
Generic Drop-in/
B25 ✓ ✓ ✓w X X 606 920 606 920 606 920 937 (975/997)
Tool-less Stab-in
R760xa
Stab-in,
B33 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
Generic L-Bracket
R740xd2 - Static
✓ ✓ X X X 609a 917 609a 917 - - - -
Tool-less
Generic Stab-in 1060
R760xd2 B23 ✓ ✓ ✓w X X 606 920 606 920 606 920 931 b
Tool-less Sliding h,t (969/991)
B6 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 676p 868 662p 861 676p 883 759b 890
Stab-in
R820/R830 B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
Generic Drop-in/ w
B13 ✓ ✓ ✓ X X 601p 931 601p 931 601p 931 714b 845
Tool-less Stab-in
Generic Drop-in/ w
R840 B15 ✓ ✓ ✓ X X 559 931 559 931 559 931 847 (900/922l)
Tool-less Stab-in
Generic Drop-in/ w 1059
B19 ✓ ✓ ✓ X X 607 919 607 919 607 919 847
Tool-less Stab-in (909/929)
R860
Stab-in -
B24 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 609 881 594 874 615 899 622n
Static
R920/R930 B8 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 686 883 674 876 686 898 794b 883(834)
R940 B12 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 600 894 586 887 600 909 773b 926(877)
11
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
Generic Drop-in/ w 1059
R960 B19 ✓ ✓ ✓ X X 607 919 607 919 607 919 874
Tool-less Stab-in (909/929)
Generic Drop-in/ w
600 931 600 931 600 931 842
R940xa B16 ✓ ✓ ✓ X X (898/921l)
Tool-less Stab-in
B10 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 677 815 665 809 677 830 836 888
FX2/FX2s
Stab-in 644 916 632 910 644 930 828 -
B11 ReadyRails II ✓ ✓ ✓a,c X X
Static
Stab-in 643 916 631 910 643 930 766 -
C4130/C4140 A9 ReadyRails II ✓ ✓ ✓a,c,d X X
Statich
T630/T640 C4 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 686 756 672 749 686 771 756 840
T320/T330/T420
C2 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 686 756 672 749 686 771 760 840
T430/T440/T620
VRTX C3 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 608 915 594 908 608 930 756 845
Stab-in
A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 v 622n -
R210/R210 II Static
R220 Stab-in 515j
A6 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 508j 751 494j 744 519j 762 -
Static 376k
Stab-in
R230/R240/R250/R260 A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
A3 ReadyRails Sliding ✓ ✓ ✓e X X 686 883 672 876 651 897 714b 835
R310/R410/R415
Stab-in
A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
B3 ReadyRails Sliding ✓ ✓ ✓f X X 686 883 672 876 651 897 714b 845
R510/R515
Stab-in
B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
A1 ReadyRails Sliding ✓ ✓ ✓e X X 692 756 678 749 657 770 768b 887
R610
Stab-in
A2 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 588 828 574 821 592 846 608n -
Static
R710 B1 ReadyRails Sliding ✓ ✓ ✓f X X 692 756 678 749 657 770 751 840
12
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
Stab-in
A2 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 588 828 574 821 592 846 608n -
Static
R715/R810
B2 ReadyRails Sliding ✓ ✓ ✓f X X 686 883 672 876 651 897 755b 883
R815/R910
T610/T710 C1 ReadyRails Sliding ✓ ✓ ✓f X X 692 756 678 749 657 770 760 840
L-Bracket
- RapidRails Static
✓ X X X X 712 755 - - - - 703 -
M1000e
L-Bracket
- VersaRails Static
✓ ✓ X X X 706 755 706 755 - - 703 -
L-Bracket m
MX7000 C5 ReadyRails II Static
✓ ✓ X X X 592 876 578 869 - - (901)
A12 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 681p 868 667p 861 681p 883 770b 895
Stab-in
XR2 A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
Stab-in
- Generic ✓g ✓g ✓g X X 464 766 464 766 464 766 464n -
Statict
Generic Stab-in 605
A20 ✓ ✓ ✓ ✓a ✓a 472 757 472 757 472 757 445b
Tool-less Sliding (498/520)
XR11/XR12
Generic Stab-in
A21S X ✓ X X X - - 458 589 - - - -
Tool-less Sliding
Generic
C1100 - Sliding ✓ ✓ X X X 665 950 665 950 - - 685 -
Tool-less
C2100 - Generic Sliding ✓ ✓ ✓ X X 664 1110 664 1110 664 1110 720 -
Stab-in
C410x - VersaRails ✓ ✓ X X X 737 972 737 972 - - 734 -
PowerEdge C
Static
Generic L-Bracket
C5xxx - Static
✓ ✓ X X X 708 947 708 947 - - 705 -
Tool-less
C610x/C6145 Generic L-Bracket
- Static
✓ ✓ X X X 615 925 615 925 - - 606 -
C6220 Tool-less
Generic L-Bracket
C63xx - Static
✓ ✓ X X X 725 917 725 917 - - - -
Tool-less
C64xx Generic L-Bracket
- Static
✓ ✓ X X X 609a 917 609a 917 - - - -
C65xx Tool-less
13
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
C66xx
Generic L-Bracket
C8000 - Static
✓ ✓ X X X 708 946 708 946 - - 713 -
Tool-less
Stab-in
B20 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
845
HS5620 B21 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 714b (749/769)
Stab-in,
HS5610 Cold Aisle A22 ReadyRails ✓ ✓ ✓a,c,d X X 608 916 594 909 610 641 897 -
Static
Stab-in
A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
HS5610(0-HDD/8-HDD)
Generic Drop-in/ 845
720b
w
A11 ✓ ✓ ✓ X X 559 931 559 931 559 931
Tool-less Stab-in (761/783)
Stab-in
A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
HS5610(4-HDD/10-HDD)
Generic Drop-in/ 895
609p 609p 609p 770b
w
A11 ✓ ✓ ✓ X X 931 931 931
Tool-less Stab-in (811/833)
Generic Stab-in
XR4000R A24 ✓ ✓ ✓a X X 342 554 342 554 342 554 358b -
Tool-less Sliding
PowerEdge XR
Generic L-Bracket
XR8000R B31 Static
✓ ✓ ✓a X X 293 516 293 516 293 516 448 -
Tool-less
14
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
658
B29 ✓ ✓ ✓a X X 472 794 472 794 472 794 544 (580/603)
Generic Stab-in
XR7620
Tool-less Sliding
B30 S X ✓ X X X - - 432 562 - - - -
Stab-in
Static ✓ ✓ ✓a,r X X 625 883 625 883 625 891 645n
Standard
XE2420 - Generic -
Stab-in
PowerEdge XE
Stab-in
2161DS/2161DS-2 - Generic ✓ ✓ ✓ ✓ X 686 737 686 737 686 737 686 -
Static
4161DS
Stab-in
2321DS - Generic X 533 737 533 737 533 737 533 -
SWITCHES
✓ ✓ ✓ ✓
Static
PC8132/PC8132F Stab-in
A5 ReadyRails ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 794 506Q -
PC8164/PC8164F Static
Networking
Stab-in
S4820T/S6000 A5 ReadyRails ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 794 506Q -
Static
Stab-in
S5000 - Generic ✓ ✓ ✓ X X 680 830 680 830 680 830 680 -
Static
Stab-in
Z9100 A5 ReadyRail ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 794 506Q -
Static
15
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
Stab-in
S4248 A5 ReadyRail ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 794 506Q -
Static
Stab-in
S41xx A5 ReadyRail ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
Stab-in
S4048/S4048T A5 ReadyRail ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
Stab-in ✓
S6010 A5 ReadyRail ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
Stab-in
S3048 A5 ReadyRail ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
L-Bracket
S6100 B9 ReadyRails II Static
✓ ✓ ✓a,c,d X X 595 914 581 907 595 929 600 -
Stab-in
S6100NEBS - Generic X X X ✓ X - - - - - - - -
Static
Stab-in
N2128PX-ON - Generic X X X ✓ X - - - - - - - -
Static
Stab-in
N3132PX-ON A5 ReadyRails ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
Stab-in
N1108T/N1108P - Generic X X X ✓ X - - - - - - - -
Static
Stab-in
N1124T/N1124P - Generic X X X ✓ X - - - - - - - -
Static
Stab-in
N1148T/N1148P - Generic X X X ✓ X - - - - - - - -
Static
Stab-in
N3024/N3048 A5 ReadyRails ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
Stab-in
S5148 A5 ReadyRails ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
Stab-in
S31xx A5 ReadyRail ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
Stab-in
N30xx A5 ReadyRail ✓ ✓ ✓ ✓ ✓ 496 770 482 763 488 764 506Q -
Static
WORKSTAT
B6 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 714b 845
IONS
R7910
Stab-in
B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
16
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
Stab-in
Precision 3930 Rack A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
B6 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 714b 845
Stab-in
Precision 7920 Rack B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
Generic Drop-in/ w
B13 ✓ ✓ ✓ X X 607p 931 607p 931 607p 931 714b 845
Tool-less Stab-in
Stab-in
B20 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622n -
Static
895
Precision 7960 Rack B21 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 685p 868 671p 861 685p 883 766b (802/822)
T7600/T7610 C2 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 686 756 672 749 686 771 760 840
R5500/R7610 B2 ReadyRails Sliding ✓ ✓ ✓f X X 686 883 672 876 651 897 755b 883
FPM185
- ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 604 900 590 893 604 914 - 611
(without KVM)
FPM185
- ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 705 900 691 893 705 914 - 715
(with KVM)
KMM
Stab-in
1U Fixed Equipment Shelf A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
PowerMax
STORAGE
PROXPE1 L-Bracket
B14 - Static
✓u ✓u ✓u,v X X 558 914 558 914 558 914 600 1015
PROXPE2
17
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
A7 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 720b 845
NX3300/NX400
Stab-in
A8 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
B6 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 714b 845
NX3200
Stab-in
B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
A3 ReadyRails Sliding ✓ ✓ ✓e X X 686 883 672 876 651 897 714b 835
NX3500 Controller
Stab-in
A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
Stab-in
NX3500 UPS A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
Stab-in
A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
DX6000G
PowerVault™
Stab-in 515c
A6 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 508c 751 494c 744 519c 762 -
Static 376d
A3 ReadyRails Sliding ✓ ✓ ✓e X X 686 883 672 876 651 897 714b 835
NX300/DX6004S
Stab-in
A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
B1 ReadyRails Sliding ✓ ✓ ✓f X X 692 756 678 749 657 770 751 840
NX3000/DX6000
Stab-in
A2 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 588 828 574 821 592 846 608 -
Static
B3 ReadyRails Sliding ✓ ✓ ✓f X X 686 883 672 876 651 897 714b 845
NX3100/DL2200
DX6012S/DR4000 Stab-in
B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
L-Bracket
MD3060e/MD3660 - VersaRail Static
✓ ✓ X X X 611 791 611 791 - - 620 -
L-Bracket
B9 ReadyRails II Static
✓ ✓ ✓a,c,d X X 595 914 581 907 595 929 600 -
MD12xx/14xx/32xx/
36xx/NX36xx L-Bracket
- RapidRails Static
✓ X X X X 732 758 - - - - 729 -
18
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
L-Bracket
- VersaRails Static
✓ ✓ X X X 714 758 714 758 - - 721 -
L-Bracket
- RapidRails Static
✓ X X X X 732 759 - - - - 729 -
MD1120
L-Bracket
- VersaRails Static
✓ ✓ X X X 714 759 714 759 - - 721 -
L-Bracket
- RapidRails Static
✓ X X X X 732 758 - - - - 735 -
MD1000/MD3000
L-Bracket
- VersaRails Static
✓ ✓ X X X 714 758 714 758 - - 735 -
Stab-in
B7 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 588 828 574 821 592 846 608 -
Static
L-Bracket
- RapidRails Static
✓ X X X X 729 755 - - - - 732 -
PV124T
L-Bracket
- VersaRails Static
✓ ✓ X X X 711 755 711 755 - - 732 -
A1 ReadyRails Sliding ✓ ✓ ✓e X X 692 756 678 749 657 770 768b 887
FS7500 Controller
Stab-in
A2 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 588 828 574 821 592 846 608 -
Static
Stab-in
FS7500 UPS A4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
EqualLogic™
L-Bracket
B9 ReadyRails II Static
✓ ✓ ✓a,c,d X X 595 914 581 907 595 929 600 -
FS76xx/PS41xx L-Bracket
- RapidRails Static
✓ X X X X 732 758 - - - - 729 -
PS61xx
L-Bracket
- VersaRails Static
✓ ✓ X X X 714 758 714 758 - - 721 -
PS6500/6510 - ReadyRails Sliding ✓ ✓ ✓a,c X X 597 793 583 786 605 817 885 885
L-Bracket
PS4000/6000/6010 - Generic Static
✓ ✓a ✓a X X 616 914 616 914 616 914 616 -
19
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Rack types supported Rail adjustability range (mm) Rail depth (mm)
Rail Mounting
Product Rail type 4-Post 2-Post Square Round Threaded
identifier interface without with
CMA/SRB CMA(SRB)
Square Round Thread Flush Center Min Max Min Max Min Max
B6 ReadyRails II Sliding ✓ ✓ ✓a,c,d X X 631 868 617 861 631 883 714b 845
SC8000
Stab-in
B4 ReadyRails ✓ ✓ ✓a,c ✓a,c ✓c 608 879 594 872 610 898 622 -
Static
L-Bracket
SC20xx/SC40xx - Generic Static
✓ ✓ ✓A X X 611 914 614 914 614 914 - -
L-Bracket
B9 ReadyRails II Static
✓ ✓ ✓a,c,d X X 595 914 581 907 595 929 600 -
L-Bracket
SC2xx/FS86xx - RapidRails Static
✓ X X X X 732 758 - - - - 729 -
Dell Compellent™
L-Bracket
- VersaRails Static
✓ ✓ X X X 714 758 714 758 - - 721 -
SCV30xx
L-Bracket
SC50xx B9 ReadyRails II Static
✓ ✓ ✓a,c,d X X 595 914 581 907 595 929 600 -
SC7020
Series 40 - Generic Sliding ✓ ✓g ✓g X X 669 923 669 923 707g 961g 693 -
Stab-in
Fibre Channel - Generic ✓ ✓ ✓ X X 606 910 606 910 606 910 598 -
Statich
Stab-in
SAS (new rails) - Generic ✓ ✓ X X X 606 910 606 910 606 910 598 -
Statich
Stab-in
SAS (old rails) - Generic ✓ ✓ ✓ X X 682 885 682 885 682 885 598 -
Statich
NAS Gen3 - Generic Sliding ✓i ✓i ✓i X X 652 854 652 854 652 854 810 -
20
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Notes:
a
Minor conversion required
b
With CMA brackets removed
c
Mounting screws not included in the kit
d
Mounting screw head diameter must be 10 mm or less
e
Requires the 1U Threaded Rack Adapter Brackets Kit (Dell PN 8Y19G), which shifts the system forward in the rack by 17.3 mm
f
Requires the 2U Threaded Rack Adapter Brackets Kit (Dell PN PKCR1), which shifts the system forward in the rack by 17.3 mm
g
Requires adapter kit (included)
h
System is serviceable while in the rack
i
Requires additional rail guide (included in kit) for full serviceability
j
With middle brackets removed
k
With rear brackets removed (applies to 2-post or cantilever mount only)
l
SRB is staged furthest to the rack door
m
Rail depth is dependent on spacing between the front and rear mounting flanges of the rack – Add amount below based on flange type:
• Square hole (5.7mm)
• Round hole (11.8mm)
n
Rail depth represents cabinet assembly only and does not represent inner rail component that attaches to chassis
o
Footnote intentionally left blank
p
Chassis type utilizes the Self-Adjusting Rail Feature to install properly into rack
q
Depth maybe greater based on rail adjustability range
r
Rail threaded mount only compatible with #10-32 thread type
s
Rail is only intended for use with ruggedized transit case (Pelican custom rack 25-036329-01)
t
Rail supports partial or full in rack service position
u
Requires swap screws (included in Rail Kit), based on chassis rack ear type and Rack Installation guide
The hole diameter of the threaded hole rack flange is required to be greater than 4mm
V
The hole diameter of the threaded hole rack flange equal or greater than 10-32UNF-2B
W
21
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
A7 ReadyRails II Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
R320/R330/R420
R430/R620 (8-HDD) Stab-in
A8 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
R630 (8-HDD) Static
R640 (8-HDD) Generic Drop-in/
A10 ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
A7 ReadyRails II Sliding ✓3,4 ✓2 ✓2 ✓ ✓9 ✓ ✓1 ✓ ✓3,4 X X ✓ ✓ ✓
R620 (10-HDD)
Stab-in
R630 (10/24-HDD) A8 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
R640 (4-HDD/10-HDD)
Generic Drop-in/
A10 ✓3,4 ✓2 ✓2 ✓ ✓9 ✓ ✓1 ✓ ✓3,4 ✓14 ✓14 ✓ ✓ ✓
PowerEdgeTM
Tool-less Stab-in
SERVERS
22
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
R360 (8-HDD) Stab-in
A8 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
R440 (4-HDD/10-HDD)
Stab-in
R450 (4-HDD) A8 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
R6415 (4-HDD/10-HDD)
R6515 (4-HDD/10-HDD)
R650xs (4-HDD/10-HDD)
R650xs (8-HDD NVME) Generic Drop-in/
A11 ✓3,4 ✓2 ✓2 ✓ ✓9 ✓ ✓1 ✓ ✓3,4 ✓14 ✓14 ✓ ✓ ✓
R660xs(4-HDD/10-HDD) Tool-less Stab-in
B6 ReadyRails II Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
R520/R530/R540/ Stab-in
B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
23
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
R540xd/R720/R720xd
R730/R730xd/R740/
R740xd/R7415/R7425
R7515 Generic Drop-in/
B13 ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
R7525 Stab-in
B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
R750 Static
Generic Drop-in/
B13 ✓3,5,12 ✓2 ✓2 ✓ ✓ ✓ ✓1 ✓ ✓3,4 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
Generic Drop-in/ ✓10,1
B19 ✓4,6,12 ✓5 ✓5 ✓ ✓10,13 ✓10,13 ✓10,13 ✓10 ✓ ✓14 ✓14 ✓ ✓10,13 3
Tool-less Stab-in
R750xa
Stab-in ✓10,1
B17 ReadyRails ✓4,6 ✓4 ✓4 ✓ ✓10 ✓10 ✓10 ✓10 ✓ ✓15 ✓15 ✓ ✓10,13 3
Static
24
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
R820/830 Stab-in
B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
Generic Drop-in/
B13 ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
Generic Drop-in/ ✓10,1
R840 B15 ✓4,6,12 ✓5 ✓5 ✓ ✓10 ✓10 ✓10,13 ✓10 ✓ X X ✓ ✓10 3
Tool-less Stab-in
Generic Drop-in/ ✓4,7,12 ✓4,7,12 ✓10,1
B19 ,13 ✓7,13 ✓ ✓13 ✓10,13 ✓10,13 ✓10,13 ✓10,13 ,13 ✓14 ✓10,13,14 ✓13 ✓13 3
Tool-less Stab-in
R860
Stab-in
B24 ReadyRails ✓4,6 ✓6 ✓ ✓ ✓10 ✓10 ✓10 ✓10 ✓4,6 ✓15 ✓15 ✓ ✓ ✓10
Static
R940 B12 ReadyRails II Sliding ✓3,6,12 ✓3,6,12 ✓3,6,12 ✓ ✓13 ✓13 ✓13 ✓13 ✓ ✓15 ✓15 ✓ ✓ ✓
25
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
Stab-in
A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
R210/R210 II/R220
Stab-in
A6 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
Static
Stab-in
R230/R240/R250/R260 A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
A3 ReadyRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
R310/R410/R415
Stab-in
A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
B3 ReadyRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
R510/R515
Stab-in
B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
A1 ReadyRails Sliding ✓3 ✓2 ✓2 ✓ ✓ ✓ ✓1 ✓ ✓3 X X ✓ ✓ ✓
R610
A2 ReadyRails Sliding ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
26
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
B1 ReadyRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
R710 Stab-in
A2 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
L-Bracket
- RapidRails Static
✓4,5 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓4,5 X X ✓ ✓ ✓
M1000e
L-Bracket
- VersaRails Static
✓4,5 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓4,5 X X ✓ ✓ ✓
L-Bracket
MX7000 C5 ReadyRails II Static
✓4,6,16 ✓16 ✓16 ✓16 ✓10,16 ✓10 ✓10 ✓10 ✓4,6,16 ✓15 ✓15 ✓ ✓10 ✓10
Stab-in
XR2 A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
Stab-in
- Generic - - - - - - - - - - - - - -
Statict
Generic Stab-in
A20 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓14 ✓14 ✓ ✓ ✓
Tool-less Sliding
XR11/XR12
Generic Stab-in
A2118 - - - - - - - - - - - - - -
Tool-less Sliding
Generic
C1100 - Sliding X X
PowerEdge C
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Tool-less
Stab-in
C410x - VersaRails ✓8 ✓8 ✓8 ✓8 ✓8 ✓ ✓ ✓8 ✓8 X X X X ✓
Static
27
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
Generic L-Bracket
C5xxx - Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
Tool-less
Generic L-Bracket
C63xx - Static
✓ ✓ ✓ ✓ ✓16 ✓ ✓ ✓ ✓ ✓14 ✓14 ✓ ✓ ✓
Tool-less
C64xx
Generic L-Bracket
C65xx - Static
✓ ✓ ✓ ✓ ✓16 ✓ ✓ ✓ ✓ ✓14 ✓14 ✓ ✓ ✓
Tool-less
C66xx
Generic L-Bracket
- Static
✓4 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓4 X X ✓ ✓ ✓
Tool-less
C610x/C6145/
C6220/C8000
Generic
- Sliding ✓4,6 ✓4, 11 ✓4, 11 ✓11 ✓ ✓ ✓ ✓ ✓4,6 X X ✓ ✓ ✓
Tool-less
Stab-in
HS5620 B20 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
PowerEdge CSP
Generic Drop-in/
B22 ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
Stab-in,
HS5610 Cold Aisle A22 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
Stab-in
A8 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
HS5610(0-HDD/8-HDD)
Generic Drop-in/
A11 ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
28
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
Stab-in
A8 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
HS5610(4-HDD/10-HDD)
Generic Drop-in/
A11 ✓3,4 ✓2 ✓2 ✓ ✓9 ✓ ✓1 ✓ ✓3,4 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
PowerEd
A23 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
ge XR
Generic Stab-in
XR4000R
Tool-less Sliding
A2418 - - - - - - - - - - - - - -
A2518 - - - - - - - - - - - - - -
Generic L-Bracket
XR8000R B31
Static
- - - - - - - - - - - - - -
Tool-less
A26 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Generic Stab-in
XR5610
Tool-less Sliding
A2718 - - - - - - - - - - - - - -
B29 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Generic Stab-in
XR7620
Tool-less Sliding
B3018 - - - - - - - - - - - - - -
Stab-in
Generic
XE2420 - Static ✓17 ✓17 ✓17 ✓17 ✓17 ✓17 ✓17 ✓17 ✓17 X X ✓17 ✓17 ✓17
Tool-less Standard
PowerEdge XE
Generic Stab-in
XE8640 B27 ✓6,12 ✓7 ✓ ✓ ✓13 ✓13 ✓13 ✓13 ✓6,13 ✓14 ✓13,14 ✓ ✓13 ✓13
Tool-less Sliding
Generic Stab-in
XE9680 B28 X X ✓ X X X X X X ✓13,14 X X X X
Tool-less Sliding
Generic Drop-in/ ✓4,7,12 ✓4,7,12 ✓10,1
XE9640 B25 ,13 ✓4,7 ✓ ✓ ✓10,13 ✓10,13 ✓10,13 ✓10,13 ,13 ✓14 ✓13,14 ✓ ✓10,13 3
Tool-less Stab-in
29
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
1081AD/2161AD/1082D
Stab-in
S/2162DS A5 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
Static
4322DS
KVM
180AS/2160AS
2161DS/2161DS- Stab-in
- Generic ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
2/4161DS Static
2321DS
SWITCHES
PC8132/PC8132F Stab-in
A5 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
PC8164/PC8164F Static
Networking
Stab-in
S4820T/S6000 A5 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
Static
Stab-in
S5000 - Generic ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
Static
B6 ReadyRails II Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 - - ✓ ✓ ✓
R7910
Stab-in
B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
Static
Stab-in
Precision 3930 Rack A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
WORKSTATIONS
Static
B6 ReadyRails II Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
Stab-in
Precision 7920 Rack B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
Generic Drop-in/
B13 ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
B21 ReadyRails II Sliding ✓3,5,12 ✓2 ✓2 ✓ ✓ ✓ ✓1 ✓ ✓3,4 X X ✓ ✓ ✓
Precision 7960 Rack
Stab-in
B20 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
30
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
Generic Drop-in/
B22 ✓3,5,12 ✓2 ✓2 ✓ ✓ ✓ ✓1 ✓ ✓3,4 ✓14 ✓14 ✓ ✓ ✓
Tool-less Stab-in
T7600/T7610 C2 ReadyRails II Sliding ✓2 ✓11 ✓11 ✓11 ✓ ✓ ✓1 ✓ ✓2 - - ✓ ✓ ✓
FPM185
- ReadyRails II Sliding ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - X ✓ ✓
(without KVM)
FPM185
- ReadyRails II Sliding ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - X ✓ ✓
KMM
(with KVM)
- RapidRails Sliding ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
17FP
- VersaRails Sliding ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
B5 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
UPS Family Static
OTHER
1U Fixed Stab-in
A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ - - ✓ ✓ ✓
Equipment Shelf Static
PowerMax
A7 ReadyRails II Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ X X X ✓ ✓ ✓
NX3300/NX400
t
Stab-in
A8 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓15 ✓ ✓ ✓
Static
31
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
B6 ReadyRails II Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ X X X ✓ ✓ ✓
NX3200
Stab-in
B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓15 ✓ ✓ ✓
Static
A3 ReadyRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ X X X ✓ ✓ ✓
NX3500 Controller
Stab-in
A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓15 ✓ ✓ ✓
Static
Stab-in
NX3500 UPS A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
Stab-in
A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
DX6000G
Stab-in
A6 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
Static
A3 ReadyRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
NX300/DX6004S
Stab-in
A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
B1 ReadyRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
NX3000/DX6000
Stab-in
A2 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
NX3100/DL2200/ B3 ReadyRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
Stab-in
DX6012S/DR4000 B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
L-Bracket
MD3060e/MD3660 - VersaRails Static
✓4,6 ✓4 ✓4 ✓ ✓10 ✓10 X ✓10 ✓4,6 X X ✓ ✓10 X
MD12xx/14xx/32xx/36x L-Bracket
B9 ReadyRails II Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
x
32
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
L-Bracket
- RapidRails Static
✓ ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X X X ✓ ✓
NX36xx
L-Bracket
- VersaRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
L-Bracket
- RapidRails Static
✓ ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X X X ✓ ✓
MD1120
L-Bracket
- VersaRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
L-Bracket
- RapidRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
MD1000/MD3000
L-Bracket
- VersaRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
Stab-in
B7 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
PV114T/PV114X - RapidRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
- VersaRails Sliding ✓2 ✓ ✓ ✓ ✓ ✓ ✓1 ✓ ✓2 X X ✓ ✓ ✓
L-Bracket
- RapidRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
PV124T
L-Bracket
- VersaRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
EqualLogic
A1 ReadyRails Sliding ✓3 ✓2 ✓2 ✓ ✓ ✓ ✓1 ✓ ✓3 X X ✓ ✓ ✓
FS7500 Controller
Stab-in
A2 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
33
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
Stab-in
FS7500 UPS A4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
L-Bracket
B9 ReadyRails II Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
FS76xx/PS41xx/PS61xx L-Bracket
- RapidRails Static
✓ ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X X X ✓ ✓
L-Bracket
- VersaRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
L-Bracket
PS4000/6000/6010 - Generic Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
L-Bracket
SC20xx/SC40xx - Generic Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Dell Compellent
SC8000
Stab-in
B4 ReadyRails ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
Static
L-Bracket
B9 ReadyRails II Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
SC2xx/FS86xx
L-Bracket
- RapidRails Static
✓ ✓ ✓ ✓ ✓ ✓ X ✓ ✓ X X X ✓ ✓
34
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Chatsworth Teraframe
Wrightline Vantage S2
Dell-branded APC Racks
Liebert Foundation
Dell xx20D/xx20S
TITAN-D/ TITAN S
HP/Compaq 9XXX
TITAN /TITAN SS
APC Netshelter SX
Dell xx20W
HP 10XXX
Dell xx20
Dell xx10
IBM S2
Rail Mounting
Product Rail Type
Identifier Interface
L-Bracket
- VersaRails Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
SCV30xx/SC50xx/SC702 L-Bracket
B9 ReadyRails II Static
✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓15 ✓15 ✓ ✓ ✓
0
Series 40 - Generic Sliding ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Stab-in
Fibre Channel - Generic ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓
Static
Stab-in
SAS (new rails) - Generic ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
Static
Stab-in
SAS (old rails) - Generic ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ X X ✓ ✓ ✓
Static
NAS Gen3 - Generic Sliding ✓6 ✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓6 X X ✓ ✓ ✓
35
Dell Technologies Enterprise Systems Rail Sizing and Rack Compatibility Matrix
Notes:
1 A rear door extension kit is required to accommodate the CMA.
3
CMA and outer CMA brackets must be removed in order to access the forward bank of rear-mount PDUs.
4 Rear-mount PDUs may impede extraction of some rear system modules.
5 The strain relief bar interferes with the forward bank of rear-mount PDUs.
7 Rails/system block both the forward and rearward banks of rear-mount PDUs.
9 The CMA tray interferes with rear door lock rod in top U and bottom U.
11 May need to adjust the rack’s mounting posts back to allow the front door to close.
12 CMA/SRB fully blocks front bank of rear-mount PDUs, and partially blocks the rearward PDU banks. Recommend rotating PDUs 90°.
13 CMA/SRB must be removed to enable rear door to close for some or all racks in this column
14 The rails align with bezels on Storage systems (unthreaded round-hole rack).
15 The rails require tooled installation for bezel alignment with Storage systems (unthreaded round-hole rack).
16 Strain relief bar might block a portion of the rearward bank of the rear-mount PDUs.
17 Normal Inner rail member allows for tool-less bezel installation and does not enable front rack door to close.
18 Rail is only intended for use within ruggedized transit case (Pelican custom rack 25-036329-01)
36