Aco Rainwater Outlets Brochure

Uniclass April 2015
L73144
CI/Sf6 S2
(52.5) ACO Building Drainage
Dr ai nage Syste ms
Product catalogue and specifiers design guide

ACO Building Drainage High Performance Rainwater
Outlets for Flat Roofs, Car Park Gullies and Other Areas
ACO Building Drainage
Our built environment is becoming ever more

complex. Applications are becoming more
sophisticated and the increasing pressure of
regulations and standards makes achieving
design, performance and financial goals ever ACO Building Drainage • A complete pricing service to stockists,
tougher. Enquiries Team: contractors and clients.
Tel: +44(0)1462 810421
Our mission: to eliminate design risk, to Fax: +44(0)1462 851490
reduce installed and life cost and to deliver Email: [email protected]
exceptional finish and performance in every
product application.
ACO Building Drainage • Product availability, delivery lead times, and
Our global resources and manufacturing Customer Services Team: all other queries including collections,
capacity make it possible for us to deliver best Tel: +44(0)1462 810411 returns and product / service issues.
value, both with our standard products and Fax: +44(0)1462 851490
with our bespoke designs. Confidence is Email: [email protected]
further assured with quality systems that are
in accordance with ISO 9001-2008.
ACO Building Drainage • Technical and installation advice.
Design Services Team: • Detailed design and ‘Value Engineering’ advice.
ACO Building Drainage is a division of ACO
Tel: +44(0)1462 810431 • Hydraulic calculations and AutoCAD drawings.
Technologies plc and part of the worldwide
Fax: +44(0)1462 851490 • Advice on the suitability of ACO equivalent
ACO Group. The Group has sales in excess of
Email: [email protected] products.
£600 million worldwide with production
facilities in the UK, Germany, France,
Switzerland, Denmark, Spain, Poland, Czech ACO Building Drainage • For all product brochures, imagery or
Republic, Australia and the USA. In total Marketing and Media Support mechandising material requests.
more than 3900 people are employed in over Tel: +44(0)1462 810400
40 countries throughout the world. Fax: +44(0)1462 851490
Email: [email protected]
collect: clean: hold: release:

Stainless Steel and Grease Management Anti-flood Backflow Lifting Stations*
Galvanised Steel Channels Systems Protection Systems
Stainless Steel Gullies
Pipe Systems
Roof / Balcony Drainage
Wetroom & Shower Drainage
*Available in 2015
Office address and contact details: For quick access to

our website, scan:
ACO Building Drainage Tel: +44(0)1462 810400
ACO Business Centre Fax: +44(0)1462 851490
Caxton Road Email: [email protected]
Bedford
Company Registration No: 1854115
Bedfordshire
VAT No: GB 650 7977 05
MK41 0LF
www.acobd.co.uk
ACO High Performance Rainwater Outlets
Contents
System Overview and Design Consederations
Flat Roofs and Typical Applications 4
Materials 4
Standard References 4
Hydraulic Design and Geographical Location 5
Flow Rate Calculation 5
Effective Catchment Area of Roofs 6
Technical Data - HP Rainwater Outlets
ACO HP Product Range Overview 8
ACO HP Vertical Spigot Outlets 9
ACO HP Vertical Screw Outlets 11
ACO HP 45° Spigot Outlets 13
ACO HP 45° Screw Outlets 15
ACO HP 90° Spigot Outlets 17
ACO HP 90° Screw Outlets 19
ACO HP Balcony Spigot Outlets 21
ACO HP Two-Way Screw Outlets 22
ACO HP Gully Spigot Outlets 23
ACO HP Gully Refurbishment Outlets 24
ACO HP Overflow Outlet Modules 25
ACO Raising Rings 26
ACO ABS Threaded Adaptors 27
ACO Discharge Spouts 27
ACO Terrace Grate 28
ACO Deck Supports 28
Technical Data - Car Park Gullies

3
ACO Car Park Gullies - Product Range Overview 29
ACO Car Park Gullies 30
ACO Car Park Gullies - Accessories 32
Installation Recommendations - HP Rainwater Outlets
Typical Flat Roof Construction Details 33
Typical Installation Guide and Construction Detail 34
Refurbishment Outlet Installation Guidelines 37
Associated ACO Building Drainage Product Ranges
Associated ACO Building Drainage Product Ranges 38

System Overview
Flat Roofs Materials Typical Applications
The past few years have seen major advances All ACO Building Drainage High Performance ACO Building Drainage High Performance
and improvements in the materials used in Rainwater Outlets are manufactured from die- Rainwater Outlets - page 8
modern roofing technology. A specifier now cast marine-grade LM6 aluminium silicon Flat roofs
has renewed confidence to take full advantage alloy. This grade of aluminium alloy is highly
Low-pitched roofs
of the benefits flat and low-pitched roof corrosion resistant, weather-proof and
designs can offer. resistant to ultra-violet radiation. Balconies
Roof terraces
Flat roofs provide opportunities for planning All cast components are polyester powder
and design flexibility, for example; terracing, coated. For additional protection, this tough ACO Building Drainage Car Park Gullies
roof-top gardens, patios, car parks, delivery and resilient powder coated finish prevents - page 29
areas, building services and ventilation natural galvanic corrosion in applications
Multi storey car parks
equipment and the ability to add additional where dissimilar metals are dressed into the
Parking decks
storeys at a later date. outlets. 304 stainless steel fixings are used to
ensure long-service durability and reliability.
Large area roofs or irregular shaped buildings Standard References:
can be completed more quickly, easily and All ACO Building Drainage Rainwater Outlets
Design requirements and flow rate
cost effectively than a pitched roof. are available in leaded gun metal to BS EN
performance refer to EN 1253:2015 Gullies
1982:2008 to special order for lead or
for Buildings – Part 2: Roof drains and floor
Flat roofs also allow easy access to natural copper-clad roofs or connection to copper
gullies without trap.
light and because of the simple construction, pipework.
internal partitioning is easy and particularly
Roof drainage layout and hydraulic
advantageous for commercial or industrial ACO Building Drainage Car Park Gullies are
calculations refer to BS EN 12056-3:2000
buildings. manufactured from grey cast iron for robust
Gravity drainage systems inside buildings –
and durable applications to accommodate
Part 3: Roof drainage, layout and calculation.
heavy and frequent vehicle loads.
High Performance (HP) outlets for a wide range of applications

Design Considerations
Hydraulic Design Geographical Location Flow Rate Calculation
The following notes are intended as a guide to Rainfall intensity has a direct impact on the The runoff, or flow rate Q, from roofs, paved
the specifier who is designing a rainwater performance requirements of any rainwater areas as surfaces is calculated as follows and
drainage system for a roof. It is recommended drainage system. For roofs and paved areas, assumes that all surfaces are impermeable:
to refer to BS EN 12056-3:2000 Gravity it is normally impracticable to guard against
drainage systems inside buildings – Part 3: very infrequent, extremely heavy rainfall AxI
Roof drainage, layout and calculation for a situations so the designer should aim to strike Q = --------- litres/second
comprehensive design guide. a balance between the cost of the drainage 3600
system, the risk category of the building and
For any rainwater drainage system to work the frequency and subsequent consequences where
effectively and reliably, it is recommended the of flooding in the advent of particularly high
specifier considers the following: rainfall events. Q = Volumetric flow rate (l/s)
Geographical location of the building The United Kingdom experiences complex and A = Effective catchment area (m²)
varied rainfall patterns, for example; although
Rainfall intensity
the upland areas of northern and western I = Rainfall intensity (75mm/hr)
Storm duration and return period
parts of the British Isles experience higher
Effective catchment area of roof
average annual rainfall than the lowland areas
Risk category of the building however, the lowland areas experience more
Hydraulic capacity of the drainage frequent and more intense short duration Alternatively,
system(s) employed rainfall than the upland areas. BS EN 12056-
3:2000 provides further information and Q = r x A litres/second
guidance on this topic.
where
Practical Design Tips
A rainfall intensity of 75mm/hr
When designing an engineered rainwater (0.02083 l/s/m²) is used throughout Q = Volumetric flow rate (l/s)
scheme, the following design hints are this design catalogue.
suggested: r = Rainfall intensity (l/s/m²)
Do not design for the maximum outlet
hydraulic capacity. Allow a 10% factor of A = Effective catchment area (m²)
safety margin for intense storms and
leaf/debris blockage. For reference, a rainfall intensity of 75mm/hr
Always allow for a back-up outlet, even = 0.02083 l/s/m²
though only one outlet may be required.
5
Rainwater outlets should be inspected and
cleaned at least every 6 months to ensure Note. Using either of the formulae above to
reliable and continuous operation. calculate runoff (Q), for a given rainfall
intensity and by knowing the flow rate
performance of an individual rainwater outlet,
the effective roof area drained can be
calculated.
Flow rate performance and effective area

drained are provided for each outlet contained
in this catalogue.
Effective Catchment Area of Roofs
Roof Type Diagram Catchment Area Calculation
Pitched roofs Figure 1.
Taking into account the effects of wind Plan Catchment Area

LR
driven rain, the effective area of a freely
A = (BR x LR) + HR/2 x LR) (m²)
exposed pitched roof draining to an eaves
= LR(BR x HR/2) (m²)
gutter or parapet wall gutter is equal to the
plan area of the roof plus half its maximum
elevation area.
HR All dimensions in linear metres.
BR
Catchment area A
Flat roofs & paved areas Figure 2.

Catchment Area
LR
Monopitch Flat Roof B = LR x TR (m²)
For a monopitch flat roof or paved area
with a freely exposed horizontal surface,
the effective catchment area is equal to the
plan area of the area to be drained as
TR
shown below:
Catchment area B
6
Dual Pitch Flat Roof Figure 3.

For a dual pitch flat roof, split the
For a dual pitch flat roof, split the roof into roof into discrete areas to isolate the
Catchment area C
discrete areas to isolate the catchment catchment areas as shown:
areas as shown: LR
Catchment Area
C= LR x TR2 (m²)
Catchment Area
TR2
D= LR x TR1 (m²)
TR1
Catchment area D All dimensions in linear metres.

Design Considerations
Roof Type Diagram Catchment Area Calculation
Adjacent vertical surfaces
Flat roofs or paved areas that are adjacent

to vertical walls and/or glazed surfaces will Figure 4.
be subject to an increased hydraulic load
due to the effects of wind driven rain Catchment area E
against these vertical surfaces and LR
subsequently running off onto the roof.
H
Monopitch Flat Roof with

Catchment Area B = LR x TR (m²)
One Adjacent Vertical Wall
Catchment Area E = LR x H/2 (m²)
For a flat roof exposed to a single wall,
assume the effective catchment areas to be
Total Catchment Area
half the exposed vertical area of the wall
= (LR x TR) + (LR x H/2) (m²)
and is shown as follows:
TR All dimensions in linear metres.
Catchment area B
Monopitch Flat Roof with Two Adjacent Figure 5.

Catchment Area B = LR x TR (m²)
Vertical Walls LR
Catchment Area E = LR x H/2 (m²)
Catchment area F Catchment area E
Similarly, for a flat roof exposed to two or
Catchment Area F = TR x h/2 (m²)
more vertical walls forming an angle or bay,
Total Catchment Area = (LR x TR) + ½√
the assumed resulting wind direction
requires that the combined areas of the (E² + F² - 2F x Cos Ɵ) (m²)
walls should be considered together as

follows: All dimensions in linear metres;
h
H angles in degrees.
7
TR
Catchment area B
Product range overview
ACO HP vertical spigot outlet ACO HP two-way screw outlet ACO HP 45° & 90° outlets
General purpose rainwater outlets suitable for The two-way outlet is designed to be used at These angled problem solving outlets are
convenient direct connection to PVC-U ‘O’-ring the junction of roofs and parapet walls, or particularly relevant to suit more complex pipe
socket pipe to BS 4514:2001 or to cast iron wherever horizontal and vertical surfaces meet. run detail. Pipework connections as spigot or
pipework to BS 416:1990 or BS EN 877: This flexible design of outlet allows either a screwed outlets.
1999. Other connections can be made using horizontal or vertical outflow take-off. Pipework
an appropriate flexible coupling or heat shrink connections as for vertical screw details.
sleeving.
Vertical spigot outlets are available with either

domed or flat gratings. Flat gratings are used
where either vehicles or pedestrian traffic is
likely.
ACO HP vertical screw outlet ACO HP balcony spigot outlet ACO HP Refurbishment outlet
8
Screwed outlets are recommended where The balcony outlet provides discrete safe When an existing flat roof is being upgraded,
connection to the outlet occurs within the drainage for balconies and walkways. Supplied the refurbishment outlet is designed to fit
thickness of the slab and threaded connections complete with a ‘D’-shaped flat grating, the inside the existing outlet and pipework with
will form a completely gas-tight seal. outlet can be installed directly against a wall. minimal disruption without the need to remove
The grating is supplied with suitable apertures the original unit or pipework.
to accommodate 50mm, 75mm or 100mm
Vertical screw outlets have a female parallel
nominal bore rainwater downpipes, easily cut
thread to BS 21:1985 for connecting directly Outlets are supplied with a flexible finned pipe
on site to suit the application.
to pipes conforming to BS EN 10226:2005. seal ensuring a watertight connection to
This ensures a completely watertight seal when existing pipework. The ease of use and
screwed home into the outlet body. minimal disruption to the existing rainwater
system makes this an extremely cost effective
solution when upgrading flat roofs.
A range of ABS threaded adaptors are available
from ACO Building Drainage to allow
connection to PVC-U, socketless cast iron and
aluminium rainwater pipes.
Contact the ACO Building Drainage Team on 01462 810400 or email [email protected] for further details.
Technical Data
ACO HP Vertical Spigot Outlet – Dome Grate
B
Membrane
D
C
E
Nominal Bore Pipe OD Area Drained‡ Flow rate† Weight

Part No Product Ref
Pipe Size (mm) (mm) (m²) (l/s) (kg)
105900 50HP-D 50 60 82 1.7 2.50

105901 75HP-D 75 83 240 5.0 2.40
105902 100HP-D 100 110 514 10.7 3.10
105903 150HP-D 150 160 725 15.1 3.60
† Actual flow rate through outlets may be significantly higher but stated capacity limited to conform to BS EN 12056-3:2000 to prevent siphonic action for gravity rainwater
drainage systems.
† Flow rate measured at 35mm head of water over outlet body for outlets up to 110mm diameter and 45mm head for 160mm diameter outlets as per EN 1253-2:2015.
‡ Based on a rainfall intensity of 75mm/hr (0.02083 l/s/m²).
Product Dimensions (mm)

Part No Product Ref Nominal bore pipe size
A B C D E
105900 50HP‐D 50 300 260 105 200 60

105901 75HP‐D 75 300 260 110 200 83
105902 100HP‐D 100 380 310 130 240 110
105903 150HP‐D 150 380 310 160 240 160
Pipework connections Specification clause

All components used within the scope of this
9
Vertical spigot outlets may be directly The rainwater outlets 50HP-D/75HP-
connected to the following: D/100HP-D/150HP-D* are to be ACO system are shown on Drawing No. * and all
Cast iron pipework to BS 416:1990 or Building Drainage HP vertical spigot outlets work shall be carried out strictly in
BS EN 877 :1999. with locked dome grating supplied by ACO accordance with the manufacturer’s
Building Drainage (a division of ACO instructions and the installation details are
PVC-U ‘O’-ring socketed pipe to
Technologies plc), ACO Business Centre, set out on Drawing No. *.
BS 4514:2001 (for 75HP-D, 100HP-D
Caxton Road, Bedford MK41 0LF.
and 150HP-D outlets only).
Connection to 50HP-D outlets via pipe * please delete or complete as appropriate.
couplings or heat shrink socket. All components to be manufactured from

grade LM6 aluminium silicon alloy to
BS EN 1706:2010.
ACO HP Vertical Spigot Outlet – Flat Grate
A
B
Membrane
D
C
E
Nominal Bore Pipe OD Area Drained‡ Flow Rate† Weight

Part No Product Ref
105904 50HP-F 50 60 82 1.7 2.80

105905 75HP-F 75 83 240 5.0 2.70
105906 100HP-F 100 110 514 10.7 3.80
105907 150HP-F 150 160 787 16.4 4.20
drainage systems.

A B C D E
105904 50HP‐F 50 300 260 105 200 60

105905 75HP‐F 75 300 260 110 200 83
105906 100HP‐F 100 380 310 130 240 110
105907 150HP‐F 150 380 310 160 240 160

10 All components used within the scope of this
Vertical spigot outlets may be directly The rainwater outlets 50HP-F/75HP-
connected to the following: F/100HP-F/150HP-F* are to be ACO Building system are shown on Drawing No. * and all
Cast iron pipework to BS 416:1990 or Drainage HP vertical spigot outlets with work shall be carried out strictly in
BS EN 877 :1999. locked flat grating supplied by ACO Building accordance with the manufacturer’s
Drainage (a division of ACO Technologies plc), instructions and the installation details are set
ACO Business Centre, Caxton Road, Bedford out on Drawing No. *.
BS 4514:2001 (for 75HP-F, 100HP-F
MK41 0LF.
and 150HP-F outlets only).
Connection to 50HP-F outlets via pipe * please delete or complete as appropriate.

BS EN 1706:2010.
Technical Data
ACO HP Vertical Screw Outlet – Dome Grate
B
Membrane
D
C
E
Nominal Bore Area Drained‡ Flow Rate† Weight

Part No Product Ref
Pipe Size (mm) (m²) (l/s) (kg)
105908 50HP-TD 50 82 1.7 2.20

105909 75HP-TD 75 240 5.0 2.30
105910 100HP-TD 100 514 10.7 3.00
105911 150HP-TD 150 730 15.2 3.10
drainage systems.

A B C D E
105908 50HP‐TD 50 300 260 45 130 2" BSP

105909 75HP‐TD 75 300 260 45 130 3" BSP
105910 100HP‐TD 100 380 310 45 130 4" BSP
105911 150HP‐TD 150 380 310 45 130 6" BSP
See Page 27 for ABS threaded adaptors
11

ACO threaded outlets are supplied with a The rainwater outlets 50HP-TD/75HP- All components used within the scope of this
parallel female screw thread to BS 21: 1985 TD/100HP-TD/150HP-TD* are to be ACO system are shown on Drawing No. * and all
for connection to tube conforming to BS EN Building Drainage HP vertical threaded outlets work shall be carried out strictly in
10255:2004 with male taper thread to with locked dome grating supplied by ACO accordance with the manufacturer’s
BS 21:1985. This ensures a completely Building Drainage (a division of ACO instructions and the installation details are set
watertight seal when screwed fully home into Technologies plc), ACO Business Centre, out on Drawing No. *.
the outlet body. Threaded outlets are Caxton Road, Bedford MK41 0LF.
recommended where connection to the outlet * please delete or complete as appropriate.
occurs within the thickness of the slab as
All components to be manufactured from
threaded connections will form a completely
gas-tight seal within the slab.
BS EN 1706:2010.
ACO HP Vertical Screw Outlet – Flat Grate
B Membrane
D
C
E

Part No Product Ref
105912 50HP-TF 50 82 1.7 2.50

105913 75HP-TF 75 240 5.0 2.50
105914 100HP-TF 100 514 10.7 3.70
105915 150HP-TF 150 736 15.9 3.80
drainage systems.

A B C D E
105912 50HP‐TF 50 300 260 45 130 2" BSP

105913 75HP‐TF 75 300 260 45 130 3" BSP
105914 100HP‐TF 100 380 310 45 130 4" BSP
105915 150HP‐TF 150 380 310 45 130 6" BSP
12

ACO threaded outlets are supplied with a The rainwater outlets 50HP-TF/75HP- All components used within the scope of this
parallel female screw thread to BS 21: 1985 TF/100HP-TF/150HP-TF* are to be ACO system are shown on Drawing No. * and all
for connection to tube conforming to BS EN Building Drainage HP vertical threaded outlets work shall be carried out strictly in
10255:2004 with male taper thread to with locked dome grating supplied by ACO accordance with the manufacturer’s
BS 21:1985. This ensures a completely Building Drainage (a division of ACO instructions and the installation details are set
BS EN 1706:2010.
Technical Data
ACO HP 45° Spigot Outlet – Dome Grate

A
Membrane
C
E
D

Part No Product Ref
105916 50/45HP-D 50 60 82 1.7 2.90

105917 75/45HP-D 75 83 240 5.0 3.50
105918 100/45HP-D 100 110 422 8.8 5.00
drainage systems.

A B C D E
105916 50/45HP‐D 50 300 260 245 135 60

105917 75/45HP‐D 75 300 260 260 160 83
105918 100/45HP‐D 100 380 310 275 200 110
13

45° spigot outlets may be directly connected The rainwater outlets 50/45HP-D/75/45HP- All components used within the scope of this
to the following: D/100/45HP-D* are to be ACO Building system are shown on Drawing No. * and all
Cast iron pipework to BS 416:1990 or Drainage HP 45° spigot outlets with locked work shall be carried out strictly in
BS EN 877 :1999. dome grating supplied by ACO Building accordance with the manufacturer’s
BS 4514:2001 (for 75/45HP-D, and
MK41 0LF.
100/45HP-D outlets only).
Connection to 50/45HP-D outlets via pipe * please delete or complete as appropriate.

BS EN 1706:2010.
ACO HP 45° Spigot Outlet – Flat Grate

A
NEW!
B Membrane
C
E
D

Part No Product Ref
105919 50/45HP-F 50 60 82 1.7 3.60

105920 75/45HP-F 75 83 240 5.0 4.00
105921 100/45HP-F 100 110 494 10.3 6.20
drainage systems.

A B C D E
105919 50/45HP‐F 50 300 260 245 135 60

105920 75/45HP‐F 75 300 260 260 160 83
105921 100/45HP‐F 100 380 310 275 200 110
14

45° spigot outlets may be directly connected The rainwater outlets 50/45HP-F/75/45HP- All components used within the scope of this
to the following: F/100/45HP-F* are to be ACO Building system are shown on Drawing No. * and all
BS EN 877 :1999. flat grating supplied by ACO Building Drainage accordance with the manufacturer’s
(a division of ACO Technologies plc), instructions and the installation details are set
BS 4514:2001 (for 75/45HP-F and
MK41 0LF.
100/45HP-F outlets only).
Connection to 50/45HP-F outlets via pipe * please delete or complete as appropriate.

BS EN 1706:2010.
Technical Data
ACO HP 45° Screw Outlet – Dome Grate

A
B
Membrane
NEW!
E
D

Part No Product Ref
105922 50/45HP-TD 50 82 1.7 3.10

105923 75/45HP-TD 75 240 5.0 2.60
105924 100/45HP-TD 100 418 8.7 4.40
drainage systems.

A B C D E
105922 50/45HP‐TD 50 300 260 190 80 2" BSP

105923 75/45HP‐TD 75 300 260 200 120 3" BSP
105924 100/45HP‐TD 100 380 310 210 145 4" BSP
15

ACO threaded outlets are supplied with a The rainwater outlets 50/45HP-TD/75/45HP- All components used within the scope of this
parallel female screw thread to BS 21: 1985 TD/100/45HP-TD* are to be ACO Building system are shown on Drawing No. * and all
for connection to tube conforming to BS EN Drainage HP 45° threaded outlets with locked work shall be carried out strictly in
10255:2004 with male taper thread to dome grating supplied by ACO Building accordance with the manufacturer’s
BS 21:1985. This ensures a completely Drainage (a division of ACO Technologies plc), instructions and the installation details are set
watertight seal when screwed fully home into ACO Business Centre, Caxton Road, Bedford out on Drawing No. *.
the outlet body. Threaded outlets are MK41 0LF.
BS EN 1706:2010.
ACO HP 45° Screw Outlet – Flat Grate
B
Membrane
NEW!
E
D

Part No Product Ref
105925 50/45HP-TF 50 1.7 82 3.50

105926 75/45HP-TF 75 5.0 240 3.60
105927 100/45HP-TF 100 8.7 485 5.10
drainage systems.

A B C D E
105925 50/45HP‐TF 50 300 260 190 80 2" BSP

105926 75/45HP‐TF 75 300 260 200 120 3" BSP
105927 100/45HP‐TF 100 380 310 210 145 4" BSP
16

ACO threaded outlets are supplied with a The rainwater outlets 50/45HP-TF/75/45HP- All components used within the scope of this
parallel female screw thread to BS 21: 1985 TF/100/45HP-TF* are to be ACO Building system are shown on Drawing No. * and all
for connection to tube conforming to BS EN Drainage HP 45° threaded outlets with locked work shall be carried out strictly in
10255:2004 with male taper thread to flat grating supplied by ACO Building Drainage accordance with the manufacturer’s
BS 21:1985. This ensures a completely (a division of ACO Technologies plc), ACO instructions and the installation details are set
watertight seal when screwed fully home into Business Centre, Caxton Road, Bedford out on Drawing No. *.
BS EN 1706:2010.
Technical Data
ACO HP 90° Spigot Outlet – Dome Grate
A
NEW!
B
Membrane
C
E
D

Part No Product Ref
105928 50/90HP-D 50 60 82 1.7 3.00

105929 75/90HP-D 75 83 240 5.0 3.00
105930 100/90HP-D 100 110 346 7.2 5.10
drainage systems.

A B C D E
105928 50/90HP‐D 50 300 260 130 230 60

105929 75/90HP‐D 75 300 260 130 230 83
105930 100/90HP‐D 100 380 310 160 290 110
17

90° spigot outlets may be directly connected The rainwater outlets 50/90HP-D/75/90HP- All components used within the scope of this
to the following: D/100/90HP-D* are to be ACO Building system are shown on Drawing No. * and all
BS EN 877 :1999. dome grating supplied by ACO Building accordance with the manufacturer’s
BS 4514:2001 (for 75/90HP-D and
MK41 0LF.
100/90HP-D outlets only).
Connection to 50/90HP-D outlets via pipe * please delete or complete as appropriate.

grade LM6 aluminium silicon alloy to BS EN
1706:2010..
ACO HP 90° Spigot Outlet – Flat Grate
A
NEW!
B
Membrane
C
E
D

Part No Product Ref
105931 50/90HP-F 50 60 82 1.7 3.30

105932 75/90HP-F 75 83 192 4.0 3.40
105933 100/90HP-F 100 110 398 8.3 6.00
drainage systems.

A B C D E
105931 50/90HP‐F 50 300 260 130 230 60

105932 75/90HP‐F 75 300 260 130 230 83
105933 100/90HP‐F 100 380 310 160 290 110
18

90° spigot outlets may be directly connected The rainwater outlets 50/90HP-F/75/90HP- All components used within the scope of this
to the following: F/100/90HP-F* are to be ACO Building system are shown on Drawing No. * and all
BS EN 877 :1999. flat grating supplied by ACO Building Drainage accordance with the manufacturer’s
(a division of ACO Technologies plc), ACO instructions and the installation details are set
Business Centre, Caxton Road, Bedford out on Drawing No. *.
BS 4514:2001 (for 75/90HP-F and
MK41 0LF.
100/90HP-F outlets only).
Connection to 50/90HP-F outlets via pipe * please delete or complete as appropriate.

BS EN 1706:2010.
Technical Data
ACO HP 90° Screw Outlet – Dome Grate
A NEW!
B
Membrane
C
E
D

Part No Product Ref
105934 50/90HP-TD 50 82 1.7 2.90

105935 75/90HP-TD 75 182 3.8 2.90
105936 100/90HP-TD 100 341 7.1 4.70
105937 150/90HP-TD 150 507 10.6 4.90
drainage systems.

A B C D E
105934 50/90HP‐TD 50 300 260 130 160 2" BSP

105935 75/90HP‐TD 75 300 260 130 160 3" BSP
105936 100/90HP‐TD 100 380 310 170 190 4" BSP
105937 150/90HP‐TD 150 380 310 215 140 6" BSP
19

ACO threaded outlets are supplied with a The rainwater outlets 50/90 HP-TD/75/90HP- All components used within the scope of this
parallel female screw thread to BS 21: 1985 TD/100/90 HP-TD/150/90 HP-TD* are to be system are shown on Drawing No. * and all
for connection to tube conforming to BS EN ACO Building Drainage HP 90° threaded work shall be carried out strictly in
10255:2004 with male taper thread to outlets with locked dome grating supplied by accordance with the manufacturer’s
BS 21:1985. This ensures a completely ACO Building Drainage (a division of ACO instructions and the installation details are set
BS EN 1706:2010.
ACO HP 90° Screw Outlet – Flat Grate
A
NEW!
B
Membrane
C
E
D

Part No Product Ref
105938 50/90HP-TF 50 82 1.7 3.30

105939 75/90HP-TF 75 197 4.1 3.20
105940 100/90HP-TF 100 389 8.1 5.50
105941 150/90HP-TF 150 624 13.0 5.00
drainage systems.

A B C D E
105938 50/90HP‐TF 50 300 260 130 160 2" BSP

105939 75/90HP‐TF 75 300 260 130 160 3" BSP
105940 100/90HP‐TF 100 380 310 170 190 4" BSP
105941 150/90HP‐TF 150 380 310 215 140 6" BSP
20

ACO threaded outlets are supplied with a The rainwater outlets 50/90HP-TF/75/90HP- All components used within the scope of this
parallel female screw thread to BS 21: 1985 TF/100/90HP-TF/150/90HP-TF* are to be system are shown on Drawing No. * and all
for connection to tube conforming to BS EN ACO Building Drainage HP 90° threaded work shall be carried out strictly in
10255:2004 with male taper thread to outlets with locked flat grating supplied by accordance with the manufacturer’s
BS 21:1985. This ensures a completely ACO Building Drainage (a division of ACO instructions and the installation details are set
BS EN 1706:2010.
Technical Data
ACO HP Balcony Spigot Outlet – Flat Grate
A 230
B 160
Membrane
C
E
D
G
F

Part No Product Ref
105942 50HP-BO 50 60 82 1.7 2.60

105943 75HP-BO 75 83 240 5.0 2.60
105944 100HP-BO 100 110 345 7.6 2.80
drainage systems.

A B C D E F G
105942 50HP‐BO 50 265 205 90 125 215 210 60

105943 75HP‐BO 75 265 205 90 125 215 210 83
105944 100HP‐BO 100 265 205 90 125 215 210 110
21

Vertical spigot outlets may be directly The rainwater outlets 50HP-BO/75HP- All components used within the scope of this
connected to the following: BO/100HP-BO* are to be ACO Building system are shown on Drawing No. * and all
Cast iron pipework to BS 416:1990 or Drainage HP vertical spigot outlets with work shall be carried out strictly in
BS EN 877 :1999. locked flat grating supplied by ACO Building accordance with the manufacturer’s
PVC-U ‘O’-ring socketed pipe to BS
4514:2001 (for 75HP-BO and 100HP-BO
MK41 0LF.
outlets only).
Connection to 50HP-BO outlets via pipe * please delete or complete as appropriate.

BS EN 1706:2010.
ACO HP Two-Way Screw Outlet – Flat Grate
E
Membrane
A
B
F
C

Part No Product Ref
105945 50HP-TW 50 82 1.7 2.10

105946 75HP-TW 75 197 4.1 2.20
105947 100HP-TW 100 374 7.8 2.20
drainage systems.

A B C D E F
105945 50HP‐TW 50 202 70 193 213 50 2" BSP

105946 75HP‐TW 75 202 70 193 213 50 3" BSP
105947 100HP‐TW 100 202 70 193 213 50 4" BSP
22

ACO threaded outlets are supplied with a The rainwater outlets 50HP-TW/75HP- All components used within the scope of this
parallel female screw thread to BS 21: 1985 TW/100HP-TW* are to be ACO Building system are shown on Drawing No. * and all
for connection to tube conforming to BS EN Drainage HP threaded outlets with locked work shall be carried out strictly in
10255:2004 with male taper thread to grating supplied by ACO Building Drainage accordance with the manufacturer’s
BS 21:1985. This ensures a completely (a division of ACO Technologies plc), ACO instructions and the installation details are set
watertight seal when screwed fully home into Business Centre, Caxton Road, Bedford out on Drawing No. *.
BS EN 1706:2010.
Technical Data
ACO HP Gully Spigot Outlet – Dome Grate
A C
B D
Membrane
G
E

Part No Product Ref
105948 75HP-GO 75 80 240 5.0 3.10

105949 100HP-GO 100 110 514 10.7 3.40
drainage systems.

A B C D E F G
105948 75HP‐GO 75 345 260 240 160 80 230 125

105949 100HP‐GO 100 345 260 240 160 110 230 125
23

Vertical spigot outlets may be directly The rainwater outlets 75HP-GO/100HP-GO* All components used within the scope of this
connected to the following: are to be ACO Building Drainage HP vertical system are shown on Drawing No. * and all
Cast iron pipework to BS 416:1990 or spigot outlets with locked dome grating work shall be carried out strictly in
BS EN 877 :1999. supplied by ACO Building Drainage (a division accordance with the manufacturer’s
of ACO Technologies plc), ACO Business instructions and the installation details are set
Centre, Caxton Road, Bedford MK41 0LF. out on Drawing No. *.
BS 4514:2001.
All components to be manufactured from * please delete or complete as appropriate.

BS EN 1706:2010.
ACO HP Gully Refurbishment Outlet – Dome Grate
A
B
D NEW!
Membrane
C
F
G
E

Part No Product Ref
105950 75HP-RFO 75 240 5.0 7.70

105951 100HP-RFO 100 240 5.0 8.20
drainage systems.

A B C D E F G
105950 75HP‐RFO 75 494 354 50 236 89 64 285

105951 100HP‐RFO 100 494 354 50 236 114 89 285
24

Refurbishment outlets are designed to fit the The rainwater outlets 75HP-RFO/100HP- All components used within the scope of this
following range of existing pipework systems: RFO* are to be ACO Building Drainage HP system are shown on Drawing No. * and all
75HP-RFO : 71.5 to 78.5mm internal vertical spigot outlets with locked dome work shall be carried out strictly in
diameter. grating supplied by ACO Building Drainage accordance with the manufacturer’s
(a division of ACO Technologies plc), ACO instructions and the installation details are set
100HP-RFO : 97.0 to 104.0 mm
Business Centre, Caxton Road, Bedford out on Drawing No. *.
diameter.
MK41 0LF.
* please delete or complete as appropriate.

BS EN 1706:2010.
Technical Data
ACO HP Overflow Outlet Module – Dome Grate
NEW!
D
A*
A*
B B
105952 105953
ØC
ØC
Nominal Bore Flow Rate† Weight

Part No Product Ref
Pipe Size (mm) (l/s) (kg)
105952 50/75HP-OF 50 2.4 2.20

105953 100/150HP-OF 75 2.4 2.70
† 35mm head of water over outlet
* Easy cut on site to suit application.

A B C D
105952 50/75HP‐OF 75 310 90 215 95

105953 100/150HP‐OF 100 310 90 273 95
25
Overflow modules are easily attached to an Overflow units are supplied with a PVC tube
appropriate circular 50/75HP or 100/150HP 250mm long that can be easily cut on site to
rainwater outlets in applications where grating the maximum permissible overflow height
blockage from leaves, for example, would lead required for the application. Overflow units are
to an excessive accumulation of water on the used in conjunction with an appropriate spigot
roof area. Unplanned excess water on the roof outlet unit.
area can lead to over-spill to the sides of the
building and significantly increase the load
applied to the roof structure.
ACO Raising Rings for Circular Outlets
A A
B
C C
105954 105955
50/75RR 100/150RR

Part No Product Ref Suitable for Outlet Product Ref Weight
A B C (kg)
50HP-D; 75HP-D; 50HP-F; 75HP-F; 50HP-TD; 75HP-TD;

50HP-TF; 75HP-TF; 50/45HP-D; 75/45HP-D; 50/45HP-F;
75/45HP-F; 50/45HP-TD; 75/45HP-TD; 50/45HP-TF;
105954 50/75RR 230 125 170 1.50
75/45HP-TF; 50/90HP-D; 75/90HP-D; 50/90HP-F;
75/90HP-F; 50/90HP-TD; 75/90HP-TD; 50/90HP-TF;
75/90HP-TF
100HP-D; 150HP-D; 100HP-F; 150HP-F; 100HP-TD;
150HP-TD; 100HP-TF; 150HP-TF; 100/45HP-D;
105955 100/150RR 150/45HP-D; 100/45HP-F; 100/45HP-TD; 100/45HP-TF; 230 125 170 1.40
100/90HP-D; 100/90HP-F; 100/90HP-TD; 150/90HP-TD;
100/90HP-TF; 150/90HP-TF
ACO Raising Rings for Balcony and Gully Outlets
26
A C A C
B
D E D E
105956 105957
HPBO-RR HPGO-RR

Weight
Part No Product Ref Suitable for Outlet Product Ref
(kg)
A B C D E
105956 HPBO-RR 50HP-BO; 75HP-BO; 100HP-BO 207 117 150 177 115 0.80
105957 HPGO-RR 75HP-GO; 100HP-GO 240 125 145 200 105 1.60
Technical Data
ACO ABS Threaded Adaptors
For use with ACO Building Drainage Screw Rainwater Outlets.
150
B
Male Thread (A)
Male Thread Spigot Dia Length Weight

Part No Product Ref
A (BSP) B (mm) L (mm) (kg)
105958 50STC 2” 55 300 0.30

105959 75STC 3” 83 300 0.60
105960 100STC 4” 110 300 1.00
105961 150STC 6” 160 300 1.60
ACO Discharge Spouts
Discharge spouts provide a convenient and aesthetically pleasing finishing detail to attach to a parapet/vertical wall outlet pipe. Manufactured from
LM6 aluminium silicon alloy they can be directly connected to ACO Building Drainage ABS Threaded Adaptors with a watertight seal and secured to
the vertical wall using two fixing lugs. Discharge spout projection from the vertical wall’s: 40mm.
27
A A A
B
C C C
D D D
105962 105963 105964
Product Dimensions (mm) Weight

Part No Product Ref
(kg)
A B C D
105962 50HP-SPOUT 75 150 135 64 1.20

105963 75HP-SPOUT 75 150 135 92 1.10
105964 100HP-SPOUT 75 150 135 118 0.90
ACO Terrace Grate for Circular Outlet Raising Rings
Terrace grates are designed for installations with terraced paving slabs or block paviors. Terrace grates can only be used with raising rings for circular
outlets as shown on Page 26. A slotted fixing detail allows 90° rotational movement to accommodate slab/pavior patterns.
250
16
230
All dimensions in mm
Weight
Part No Product Ref Grating Size (mm)
(kg)
105965 HPTG 230 x 230 x 16 1.30
Requires 50/75RR or 100/150RR as applicable
ACO Deck Supports for Circular Outlets
Deck supports are used where ACO Building Drainage HP Rainwater Outlets are installed in metal deck roof constructions, providing a stable and
secure interface between the outlet and roof. Deck Supports are manufactured from mild steel and primed in a red oxide paint finish and finished in a
polyester powder coat. They are suitable for all types of roof decking.
600
600
395
395
70
15
Ø2
Ø3
28
395 395
600 600
105966 105967
Weight
Part No Product Ref Suitable for Outlet Product Ref
(kg)
50HP-D; 75HP-D; 50HP-TD; 75HP-TD; 50/45HP-D; 75/45HP-D; 50/45HP-TD; 75/45HP-TD;

105966 50/75DS 2.20
50/90HP-D; 75/90HP-D; 50/90HP-TD; 75/90HP-TD
100HP-D; 150HP-D; 100HP-TD; 150HP-TD; 100/45HP-D; 150/45HP-D; 100/45HP-TD;
105967 100/150DS 2.50
100/90HP-D; 100/90HP-TD; 150/90HP-TD
Technical Data
ACO Car Park Gullies

NEW!
ACO Building Drainage cast iron Car Park Key benefits Key features
Gullies are designed specifically for trafficked
Durable, robust cast iron construction Stainless steel bolted grating for security
car park applications with direct vehicle
access providing a robust, compact and Low profile design for shallow deck 110mm spigot outlet for easy pipe
durable drainage solution. installations connection

Quick installation Choice of horizontal or vertical outlet
Car Park gullies are ideal for multi-storey car Load Class M125 (12.5 tonne) grating to Removable galvanised steel dirt bucket
parks, shallow parking deck or podium deck BS EN 1253 Optional drainage weep hole facility
applications and particularly suited for high Locked grating Optional intumescent fire stop cartridge
traffic frequency. High flow rate – large area drainage R120/2 hour rating (vertical outlet
Easy maintenance versions only) 29
Fire proof – Class A1 Black water-based paint finish
Shallow deck installation with 110mm Through deck installation with 110mm vertical
horizontal outlet with weep-hole drainage outlet complete with locked grating, galvanised
facility. Complete with locked grating and steel dirt bucket and R120/2 hour fire stop
galvanised steel dirt bucket. cartridge fitted.
ACO Car Park Gullies
ACO Car Park Gully - Vertical Outlet, Framed

NEW!
300
300
110
Ø110 16
300
Spigot Dia Flow Rate† Area Drained‡ Flanged & Galvanised Weight
Part No Load Class Grating Locks
(mm) (l/s) (m²) Weep Holes Dirt Bucket (kg)
105980 110 4.5 216 No M125 Yes Yes 35.00
† 35mm head of water

‡ Rainfall intensity 75mm/hr (0.02083 l/s/m²)
ACO Car Park Gully - Vertical Outlet, Flanged Weep Hole

NEW!
50
450
300
300
110
30
Ø110
16
300
450
105982 110 4.5 216 Yes M125 Yes Yes 47.00

Technical Data
ACO Car Park Gully - Horizontal Outlet, Framed

NEW!
300
180
3°
Ø110
16
339 300
105981 110 4.5 216 No M125 Yes Yes 40.00

ACO Car Park Gully - Horizontal Outlet, Flanged Weep Hole NEW!
50
450
300
180
3°
Ø110
31
339
16
300
450
105983 110 4.5 216 Yes M125 Yes Yes 52.00

ACO Car Park Gullies - Accessories
Accessories
NEW!
Raising Ring 45mm
45
30
300
300
Part No Clearance Holes for Grating Locks Weight (kg)
105984 Yes 7.90
Raising rings are suitable for all ACO Building Drainage Car Park Gullies and may be cascaded in increments of 45mm. Extension bolts for grating
locks not provided. M12 x 35mm stainless steel cap head screws supplied as standard.
Intumescent Fire Stop

NEW!
Ø127
127
32
Part No Fire Rating Weight (kg)
105985 R30-120 0.30
Intumescent fire stop can only be used with vertical outlet Car Park Gullies. Please note that the Car Park gully flow rate is restricted to 3 l/s when a
fire stop is fitted (144m² area drained at a rainfall intensity of 75mm/hr (0.02083 l/s/m²).
Installation Recommendations
Typical Flat Roof Construction Details
Warm Roof
Raising Ring
A warm roof is where the main mass of the
Two Layer mastic Ashpalt
roof structure lies below the main thermal
Reflective Layer Secure Bolted Grating
insulation. The waterproof membrane is of Chippings
Clamping Ring
positioned above the insulation.
Rigid Insulation Board
Sand / Cement Screed

To Falls
Vapour Barrier
Structural Deck
Outlet Body
Raising Ring
Secure Bolted Grating

Inverted Roof
Gravel Ballast Clamping Ring
An inverted roof is a form of warm roof where

the main mass of the roof structure lies below
the main thermal insulation, however, the
waterproof membrane lies beneath the
thermal insulation.
To Falls
Two Layer Mastic Ashphalt 33

on Isolating Membrane Structural Deck
Outlet Body
Un-insulated Roof
Clamping Ring
A roof without thermal insulation. This type of

construction is only permitted in non-
habitable buildings, e.g. garages.
Two Layer Mastic Ashphalt

In Situ Cast Concrete Deck
on Isolating Membrane
Outlet Body
Typical Installation Guide & Construction Detail
HP 90° outlet Three Layer Built up Felt Roof Secure Bolted Grating
Clamping Ring
Firring Piece
Plywood Deck
Timber Joist
Insulation
Outlet Body Plaster ceiling with Internal Vapour Barrier
Secure Bolted Domical Grate
Gully outlet Clamping Ring

Sheet Lead Gutter Lining
Plywood Base
Insulated Gutter
Ply Sub-base
Timber Spacers in
Insulated Gutter
34 Outlet Body
Refurbishment outlet
Main Waterproofing
ACO HP Refurbishment Outlet
(Fitted as Manufacturers Recommendations)
Refurbishment Insululation
New vapour barrier laid onto Structural Deck

cleaned existing roof
Refurbishment Outlet Spigot cut as required

Original Outlet Body
Installation Recommendations
RWP
Flat Grate with

Balcony outlet with downpipe RWP cut-out

Clamping Ring on Isolating Membrane

To Falls
Structural Deck
Outlet Body
Two-way outlet
Outlet Body Reflective Chippings on Three

Screw Thread Connector
Layer Built Up Felt Roofing
Clamping Ring
Vapour Barrier
35
Structural Deck
Two-way outlet with spout
Reflective Chippings on Three

Layer Built Up Felt Roofing
Outlet Body
Screw Thread Connector
Clamping Ring
Spout
Vapour Barrier
Structural Deck
Hopper & RWP
(by others)
Terrace grate
Paving Slab Ballasting

Terrace Grate
Paving Slab Supports
Raising Ring

To Falls
Structural Deck

on Isolating Membrane
Outlet Body
Metal deck support

36

Timber Fillet
with integral vapour barrier to falls

Three Layer Built up Felt Roof
Clamping Ring
Metal Deck
Deck Support
Metal Closure Plate
Outlet Body
Appendices
Refurbishment Outlet installation Guide
Step 1 Step 2
Remove redundant roofing materials; brush & clean surfaces ready for Lay new vapour barrier & bond into existing rainwater outlet.
new installation.
Step 3 Step 4
With the finned rubber seal removed, insert the ACO Refurbishment Bond strips of vapour barrier to the Refurbishment Outlet flanges and
Outlet into the sump of the existing rainwater outlet body. If necessary, existing vapour barrier to ensure a total seal.
reduce the spigot length of the new outlet to allow full insertion.
Replace rubber seal and re-insert. 37
Step 5 Step 6 Step 7

Cut and lay insulation board around Lay main waterproofing material over entire With the waterproofing material still pliable,
refurbishment outlet. If insulation is greater area and trim into the sump of the install clamping ring and tighten nuts evenly.
than 50mm thick, chamfer board so that refurbishment outlet, ensuring the spigot Fit the grating to complete the installation.
outlet is at same level as the outlet top outlet is clear or waterproofing material.
surface.
ACO Engineered Solutions
ACO Engineered Solutions offer the designer / specifier a Examples of ACO Engineered Solution applications include:
range of products virtually free from the constraints of ‘off ∙ Workable drainage where there is limited invert depths
the shelf’ items. Our engineers are able to offer detailed
∙ Refurbishment situations with replacement channels and
advice on all aspects of required design solutions, together
point drainage
with hydraulic flow analysis, practical site installation,
suitable materials and best practices. ACO Engineered ∙ Interface with threshold details
Solutions enjoy rigorous product management from initial ∙ Discreet channel applications
enquiry through to post-delivery. ∙ Radius channel applications
Uniclass July 2011

L73144
CI/SfB
(52.5) ACO Building Drainage
Drainage Systems
ACO FreeDeck
ACO FreeDeck is an advanced roof and balcony drainage system combining

line drainage with point drainage by using an open sided drainage channel
system to collect and convey rainwater to drainage points within a raised or
suspended deck structure. Manufactured in galvanised steel or stainless steel,
ACO FreeDeck channel is simply laid directly onto the insulation layer or Product catalogue
ACO FreeDeck - Level Access Flat Roof
waterproofing membrane. and Terrace Drainage Systems
38

Dr a i nage Syste ms
ACO DeckLine 125
ACO DeckLine 125 is a shallow invert hot-dipped galvanised steel linear

drainage system for applications up to and including Load Class C 250. It is
ideally suited for parking decks and areas such as structural slabs or where
excavation depth is limited. Available off the shelf ACO DeckLine is durable,
100% watertight and easy to install. ACO DeckLine 125 is tested and Product catalogue
ACO Deckline 125
certified to BS EN 1433. Galvanised Steel
Shallow Invert Surface Water Drainage System
All product brochures are available for viewing and downloading at www.acobd.co.uk

Pipework Systems
ACO PIPE®
ACO PIPE® is manufactured from thin-wall austenitic stainless steel in grades

304 and 316 and is pickle passivated for optimum durability and corrosion
resistance. ACO PIPE® is available in a wide range of socketed waste pipework
products and accessories for above and below ground rainwater and industrial
wastewater drainage applications. Used together with other ACO products it
creates a perfect system and one stop sustainable drainage solution with
unique advantages to the customer – lightweight, easy installation, low
Product catalogue
thermal expansion co-efficient, sustainable material, hygienic, near zero ACO PIPE® Stainless Steel Pipework Systems
maintenance. When used with ACO stainless steel gullies and channel systems
it provides a unique system for building drainage.
#! " '' &

Drainage Systems
ACO Modular 125
ACO Modular 125 Stainless Steel linear drainage is our most requested product
range as it is suitable for most applications. ACO Modular 125 is manufactured in
stainless steel grade 304 as standard and 316 to order. Available in a wide range of
lengths, constant depths, sloping inverts and gratings ‘off the shelf’, it can be
modified to meet your exact application requirements. Used together with ACO Gully 39
®
157 or 218 and ACO PIPE it offers the specifier, contractor and user the benefits of
a unified system for building drainage and one stop drainage solution with unique
advantages – fully tested and classified to BS EN 1433, CE marked, pickle Product catalogue
ACO Modular 125

passivated for optimum durability and corrosion resistance, vee-bottomed profiled
Stainless Steel Channel Drainage System
channel for enhanced flow efficiency, optional grating security locks and lightweight
channel sections for safe and easy installation.
ACO Technologies plc
ACO Water Management

Civils + Infrastructure
Urban + Landscape
ACO Sport
ACO Wildlife
A division of ACO Technologies plc

ACO Business Centre
Caxton Road
Bedford
Bedfordshire
MK41 0LF
Tel: 01462 810400
Fax: 01462 851490
e-mail: [email protected]
www.acobd.co.uk
The ACO Group: A strong family you can depend on.
© April 2015 ACO Technologies plc. All reasonable care has been taken in compiling the information in this document. All
recommendations and suggestions on the use of ACO products are made without guarantee since the conditions of use are beyond
the control of the Company. It is the customer's responsibility to ensure that each product is fit for its intended purpose, and that the
actual conditions of use are suitable. This brochure and any advice is provided by ACO Technologies plc (the Company) free of
charge and accordingly on terms that no liability including liability for negligence will attach to the Company or its servants or
agents arising out of or in connection with or in relation to this brochure or any such advice. Any goods supplied by the Company
will be supplied solely upon its standard conditions of sale, copies of which are available on request. The Company's policy of
continuous product development and improvement renders specifications liable to modification. Information provided in this
brochure is therefore subject to change without prior notification.

Aco Rainwater Outlets Brochure

Uploaded by

Copyright:

Available Formats

Aco Rainwater Outlets Brochure

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Aco Rainwater Outlets Brochure

Uploaded by

Copyright:

Available Formats

Uniclass April 2015

Product catalogue and specifiers design guide

ACO Building Drainage

Our built environment is becoming ever more

collect: clean: hold: release:

 Stainless Steel Gullies

 Roof / Balcony Drainage

 Wetroom & Shower Drainage

Office address and contact details: For quick access to

System Overview and Design Consederations

Flat Roofs and Typical Applications 4

Hydraulic Design and Geographical Location 5

Flow Rate Calculation 5

Effective Catchment Area of Roofs 6

Technical Data - HP Rainwater Outlets

ACO HP Product Range Overview 8

ACO HP Vertical Spigot Outlets 9

ACO HP Vertical Screw Outlets 11

ACO HP 45° Spigot Outlets 13

ACO HP 45° Screw Outlets 15

ACO HP 90° Spigot Outlets 17

ACO HP 90° Screw Outlets 19

ACO HP Balcony Spigot Outlets 21

ACO HP Two-Way Screw Outlets 22

ACO HP Gully Spigot Outlets 23

ACO HP Gully Refurbishment Outlets 24

ACO HP Overflow Outlet Modules 25

ACO Raising Rings 26

ACO ABS Threaded Adaptors 27

ACO Discharge Spouts 27

ACO Terrace Grate 28

ACO Deck Supports 28

Technical Data - Car Park Gullies

ACO Car Park Gullies - Product Range Overview 29

ACO Car Park Gullies 30

ACO Car Park Gullies - Accessories 32

Installation Recommendations - HP Rainwater Outlets

Typical Flat Roof Construction Details 33

Typical Installation Guide and Construction Detail 34

Refurbishment Outlet Installation Guidelines 37

Associated ACO Building Drainage Product Ranges

Associated ACO Building Drainage Product Ranges 38

Flat Roofs Materials Typical Applications

High Performance (HP) outlets for a wide range of applications

Hydraulic Design Geographical Location Flow Rate Calculation

Flow rate performance and effective area

Effective Catchment Area of Roofs

Roof Type Diagram Catchment Area Calculation

Pitched roofs Figure 1.

Taking into account the effects of wind Plan Catchment Area

Flat roofs & paved areas Figure 2.

Dual Pitch Flat Roof Figure 3.

Catchment area D All dimensions in linear metres.

Roof Type Diagram Catchment Area Calculation

Adjacent vertical surfaces

Flat roofs or paved areas that are adjacent

Monopitch Flat Roof with

TR All dimensions in linear metres.

Monopitch Flat Roof with Two Adjacent Figure 5.

Stainless Steel Gullies

Roof / Balcony Drainage

Wetroom & Shower Drainage