ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DAT INSTRUMENTS - 2016 PRODUCTION CATALOGUE

Services available: DAT ONLINE on-line training course, DAT WORKSHOP training day in DAT
headquarters, DAT ONSITE on-site installation and training course, EDAT e-mail data printing.

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 1
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DAT INSTRUMENTS - 2016 PRODUCTION CATALOGUE

GROUTING, CEMENT INJECTIONS LUGEON TESTS

JET GROUTING DRILLING

SOIL MIXING - DEEP MIXING CFA - CONTINUOUS FLIGHT AUGER

DIAPHRAGM WALLS - HYDROMILLS AUTOMATIC CEMENT MIXING

VIBROFLOTATION INCLINATION AND VERTICALITY CONTROL

GENERIC ACQUISITION SYSTEMS LIFTING EQUIPMENT AUTOMATISMS

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 2
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
GROUTING
For low pressure injections, DAT
instruments provides two kinds of products:
JET AME 4000 / I, up to 4 pumps, with
monitoring, recording and automation
functions;
JET DSP 100 / IR, for one single pump,
with displaying and recording functions.

(Italy)

(Greece)

• Automatic restart of pumping if, after being stopped,

pressure goes under pre-established value.
• Start of the injectors directly from JET 4000 AME / I
datalogger keyboard.
• Sending from a PC of a project with different kind of
pile and valve in order to avoid set up in field.
• Data downloading to PC, in order to create and print
summarizing reports, to obtain easy and quick
information files concerning injections carried out and to
export data to Microsoft Excel.
• Possibility to print data immediately, via JET PRINT60
printer which can be installed into the datalogger.
JET 4000 AME / I (from 1 to 4 pumps):
• Measuring and recording of pressure, flow and volume JET DSP 100 / IR (1 pump):
parameters of cement grout. • Measuring and recording of pressure, flow and
• Display, directly on datalogger LCD, of instantaneous volume parameters of cement grout.
pressure, flow rate and volume values. • Display with very big digits, directly on datalogger LCD,
• Display in real time of injection graphics and of of instantaneous pressure, flow rate and volume values.
summarizing reports. • Data downloading to PC, in order to create and print
• Automatic stop of the injector when maximum established summarizing reports, to obtain easy and quick
pressure, maximum volume of the grout are reached, via information files concerning injections carried out and to
GIN method or when achieving maximum duration. export data to Microsoft Excel.

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 3
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
LUGEON TESTS
Lugeon test is used to measure the quantity
of water injected into a segment of bored
hole under a steady pressure; the value
(Lugeon value) is defined as the loss of
water in litres per minute and per metre
borehole at a pressure of 10 bar.

JET FLOW WRL (1 pump):

• Start of the injectors directly from JET 4000 AME / I
• Direct connection to PC in real time. Wireless connection datalogger keyboard.
available.
• Sending from a PC of a project with different kinds of
• Measuring of pressure, flow and volume parameters. tests in order to avoid set up in field.
• Display, directly on PC monitor, of instantaneous pressure, • Data downloading to PC, in order to create and print
flow rate and volume values. summarizing reports, to obtain easy and quick
• Display in real time, on PC monitor, of all Lugeon graphics information files concerning injections carried out and to
and of summarizing reports. export data to Microsoft Excel.
• Data recording directly on the PC. • Possibility to print data immediately, via JET PRINT60
printer which can be installed into the datalogger.
JET 4000 AME / I (from 1 to 4 pumps): • Possibility to connect to PC in real time.
• Measuring and recording of pressure, flow and volume
parameters. JET DSP 100 / IR (1 pump):
• Display, directly on datalogger LCD, of instantaneous • Measuring and recording of pressure, flow and
pressure, flow rate and volume values. volume parameters.
• Display in real time of injection graphics and of • Display with very big digits, directly on datalogger LCD,
summarizing reports. of instantaneous pressure, flow rate and volume values.
• Automatic stop of the injector when maximum established • Data downloading to PC, in order to create and print
pressure, maximum volume are reached, via GIN method or summarizing reports, to obtain easy and quick
when achieving maximum duration. information files concerning injections carried out and to
• Automatic restart of pumping if, after being stopped, export data to Microsoft Excel.
pressure goes under pre-established value. • Possibility to connect to PC in real time.

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 4
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
JET GROUTING
Jet grouting technique consists in injecting
cement grout at high pressure. The bi-fluid
jetgrouting technique consists in injecting air
and cement, and allows to obtain piles with
a greater diameter. Tri-fluid injection,
consists in injecting simultaneously air,
water and cement.

(Singapore) (Turkey)

Display, directly on Measuring and recording of the following

datalogger LCD, of parameters (by appropriate sensors, both during
instantaneous and drilling and withdrawal rod movement):
average recorded • drill depth (JET DEPTH)
parameters, of graphics • feed force (JET FORCE)
in terms of depth and of • translation rod speed (JET DEPTH)
summarizing data. • boring rod rotation torque (JET TORQ)
Automatic start of the • boring rod rotation speed (JET ROT)
(separator) equipment when • X and Y mast inclination (JET INCL XY)
starting recording,
• cement pressure, flow and volume
automatic stop when reaching required depth,
• water pressure, flow and volume
automatic management of rod ascent.
Automatic recognition of rod changing operation. • air pressure
Automatic recording suspension. • rod rise step time
Sending from a PC of a project with different kinds of • injected column length
pile in order to avoid set up in field. • date and time of drilling/jetting and duration
Data downloading to PC in order to process, file, export • soil relative energy
and print exhaustive reports. • input for GPS receiver
DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 5
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
DRILLING
Via real time parameters recording, it is
possible to analyze the geomechanical
characteristics of soil.
Depth based diagraph underlines different
stratigraphic soil levels.
Also available: JET SDP / IB low cost
drilling datalogger

(Turkey)

(on positioner)

(France)

Measuring and recording of the following selectable

parameters :
• drill depth (JET DEPTH)
JET 4000 AME / J - MD datalogger. • feed force (JET FORCE)
Display, directly on datalogger LCD, of instantaneous and • translation rod speed (JET DEPTH)
average recorded parameters, of graphics in terms of
• boring rod rotation torque (JET TORQ)
depth and of summarizing data.
• boring rod rotation speed (JET ROT)
Automatic start of the equipment when starting
recording, automatic stop when reaching required depth. • X and Y mast inclination (JET INCL XY)
Automatic recognition of rod changing operation. • water pressure (JET PRESS)
Automatic recording suspension. • water flow and volume (JET FLOW)
Data downloading to PC in order to process, file, export • date and time of drilling and duration
and print exhaustive reports. • soil relative energy
• input for GPS receiver

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 6
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
CFA
CFA technique (continuous flight auger) is
an injection method. The soil is drilled with a
continuous flight auger and it is injected
with concrete through the same auger.
Once injection is finished a metal armour is
placed in the ground.

Measuring and recording of the following selectable

parameters (by appropriate sensors, both during
Display, directly on datalogger LCD, of instantaneous drilling and withdrawal rod movement):
and average recorded parameters, of graphics in terms of • drill depth (JET DEPTH)
depth and of summarizing data. • rod speed (JET DEPTH)
Automatic start of the equipment when starting • translation rod speed (JET DEPTH)
recording, automatic stop when reaching required • boring rod rotation torque (JET TORQ)
depth, automatic management of rod ascent (on/off • boring rod rotation speed (JET ROT)
control, optional: proportional). • X and Y mast inclination (JET INCL XY)
Automatic recognition of rod changing operation. • concrete pressure (JET PRESS)
Automatic recording suspension. • concrete flow and volume (JET FLOW)
Sending from a PC of a project with different kinds of • possible rod rise step time
pile in order to avoid set up in field.
• injected pile length
Data downloading to PC in order to process, file, export
• date, time (beginning and end of work), duration
and print exhaustive reports.
• input for GPS receiver

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 7
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
DIAPHRAGM WALLS
HYDROMILLS
Diaphragms must be carried out with all
devices in order to obtain a proper work
which follows project demand. Realized
diaphragm verticality and rotation must be
carried out carefully in order to grant
impermeability to joints.

JET DSP 100 / D datalogger can display, on a wide JET DSP 100 / D can record digging data in
monitor, and record, on an internal memory, the function of depth. During strokes necessary to
following parameters: create the diaphragm, each stroke data are
• Depth (m, with 1 cm resolution) recorded. Latest stroke data are also recorded to
• Inclination on both X and Y axis to the analyze the dig on the PC once in office.
vertical (with 0,1° resolution) The datalogger can be set up via a PC. In this
• Grab rotation, Z axis (with 1° resolution) way, it is possible to calibrate sensors, set up
• X and Y axis deviation to the vertical (with data acquisition parameters and indicate
1cm resolution) fullscale graphic values.
Data are acquired via sensors installed on digging JET DSP 100 / H is the specific cabled version
equipment. Inclination sensor can be connected to for hydromills. Additional recorded parameters:
the datalogger via a cable (for real time) or via radio. hydromills rotation speed and mud pump
pressure/flow.

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 8
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
SOIL MIXING
Soil mixing technique consists in injecting
cement both during drilling and injection
phase at a low pressure.
There are two kinds of operation: the
superficial one and the deep one (deep soil
mixing).

(pressure, flow and (Italy)

volume sensors)

Measuring and recording of the following

parameters (by appropriate sensors, both during
descent and withdrawal rod movement):
Display, directly on datalogger LCD, of instantaneous • drill depth (JET DEPTH)
and average recorded parameters, of graphics in terms of • feed force (JET FORCE)
depth and of summarizing data. • translation rod speed (JET DEPTH)
Automatic start of the equipment when starting • boring rod rotation torque (JET TORQ)
recording, automatic stop when reaching required • boring rod rotation speed (JET ROT)
depth, automatic management of rod ascent (on/off • X and Y mast inclination (JET INCL XY)
control calculated on volume/meter). • cement pressure (JET PRESS)
Automatic recognition of rod changing operation.
• cement flow rate and volume (JET FLOW / E)
Automatic recording suspension.
• injected litres / meter
Sending from a PC of a project with different kinds of
pile in order to avoid set up in field. • treatment length
Data downloading to PC in order to process, file, export • date, time (beginning and end of work), duration
and print exhaustive reports. • input for GPS receiver

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 9
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

DATALOGGER and
SOFTWARE for:
VIBROFLOTATION
Vibroflotation is a technique using a vibrating
probe which goes into the soil. Soil is
compacted thanks to this vibrating action.
Then, gravelly materials are put in the free
space created by this action. These materials
will increase soil solidity.

(Singapore) (Morocco)

Display, directly on datalogger LCD, of Measuring and recording of the following

instantaneous and average recorded parameters (by appropriate sensors, both during
parameters, of graphics in terms of depth descent and withdrawal hammer movement):
and of summarizing data. • treatment depth (JET DEPTH)
• volume of added gravel (number of grabs)
Data downloading to PC in order to • current absorbed by electric hammer
process, file, export and print exhaustive or
reports. • pressure of hydraulic hammer
• treatment length
• date, time (beginning and end of work), duration
• input for GPS receiver

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 10
 ISO 9001:2008 certified firm

INSTRUMENTS
automation systems and software, data acquisition devices … your eyes in the ground

INCLINATION
and
DEPTH METER
JET SDP / J provides the best
technologies for an accurate
measurement of inclination and
borehole depth.
Optional: rod translation control
function for injections (by setting rod
stop seconds and step centimeters).

Cheap and easy !

Starter kit for drilling rigs.

JET DEPTH2, depth sensor JET DEPTH, depth sensor

Optional: sound/light alarm

control panel while over-
reaching pre-established
angle, DAT INCL ALARM Upgradeable to: JET 4000 AME / J for data recording JET INCL XY, inclinometer

DAT instruments, Via Mestre, 12 - 21050 Cairate (VA) - Italy - Tel +39 0331 071147 - Fax +39 0331 071214
[email protected] - www.datinstruments.com - skype: datinstruments Page 11