0% found this document useful (0 votes)
538 views34 pages

Embedded Systems

The document summarizes a student's internship report on embedded systems. It includes the student's personal details, college information, internship dates and location. The internship was conducted at Intrainz Innovation Private Limited in Bangalore, India from May 1st to June 25th, 2023. The report documents the student's activities and learning experiences during the internship in accordance with their degree requirements.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
538 views34 pages

Embedded Systems

The document summarizes a student's internship report on embedded systems. It includes the student's personal details, college information, internship dates and location. The internship was conducted at Intrainz Innovation Private Limited in Bangalore, India from May 1st to June 25th, 2023. The report documents the student's activities and learning experiences during the internship in accordance with their degree requirements.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 34

A short Term Internship report on

EMBEDDED SYSTEMS
Submitted in accordance with the requirement for the the award of the Degree of
Bachelor of Technology
in
Electronics and Communication Engineering
By
Tenali. Abhinaya Keerthi (203R1A0402)

Under the Guidance of


Mr. V Suneel Reddy M. Tech

Associate Professor

DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING


RAMIREDDY SUBBARAMIREDDY ENGINEERING COLLEGE
(Approved by AICTE and Affiliated to JNTUA, Ananthapuramu, Accredited by NAAC with ‘A’ Grade)

NH-16, KADANUTHALA, KAVALI, SPSR Nellore (Dt.), A.P – 524142

(2022-2023)
Department of Electronics & Communication Engineering,
RAMIREDDY SUBBARAMIREDDY ENGINEERING COLLEGE
(Approved by AICTE, New Delhi & Affiliated to JNTUA)
ISO 9001:2015, Iso 14001:2015, ISO
50001:2018 Certified
Institution, Recognized by UGC under section 2(f) of UGC Act,1956
Accredited with A grade by NAAC
NH-16, KADANUTHALA (V), BOGOLE (M), SPSR NELLORE, – 524 142, A.P.
2020-2024

CERTIFICATE
This is to certify that the entitled Industry Internship on “EMBEDDED SYSTEMS “is
being submitted by T. ABHINAYA KEERTHI (203R1A0402). In partial fulfilment of the
requirements for the award of the degree of BACHELOR OF TECHNOLOGY in
ELECTRONICS AND COMMUNICATION ENGINEERING, to the JAWAHARLAL
NEHRU TECHNOLOGICAL UNIVERSITY, ANANTHAPUR, is a record of Bonafide
work carried out by them under my guidance and supervision.

PROJECT GUIDE HEAD OF THE DEPARTMENT


Mr. V SUNEEL REDDY Mr. V SUNEEL REDDY
Associate Professor Associate Professor
Program Book
for
Short-Term Internship

Name of the Student: Tenali. Abhinaya Keerthi

Name of the College: Ramireddy Subbarami Reddy Engineering College

Registration Number: 203R1A0402

Period of Internship: From: 01/05/2023 To: 25/06/2023

Name & Address of the Intern Organization

Intrainz Innovation Private Limited

48,1st Avenue,Jakkasandra,1st Block Koramangala,

Bangalore, Karnataka, 560034, IN


An Internship Report
On
EMBEDDED SYSTEMS

Submitted in accordance with the requirement for the degree of bachelor


in electronics and communication engineering

Name of the College: Ramireddy Subbarami Reddy Engineering College

Department: Electronics and Communication Engineering

Name of the Faculty Guide: Mr. V Suneel Reddy

Duration of the Internship: From 01/05/2023 To 25/06/2023

Name of the Student: Tenali. Abhinaya Keerthi

Programme of Study: B. Tech

Year of Study: 3rd Year

Register Number: 203R1A0402

Date of Submission: 26/06/2023


Student’s Declaration

I, Tenali. Abhinaya Keerthi ,a student of Short Term Internship Program Reg.


No. 203R1A0402 the Department of Electronics and Communication Engineering,
Ramireddy Subbarami Reddy Engg College do hereby declare that I have
completed the mandatory internship from 01/05/2023 to 25/06/2023 in Intrainz
Innovation Private Limited under the Faculty Guideship of Mr. M Kondaiah,
Department of Electronics and Communication Engineering, Ramireddy Subbarami
Reddy Engineering College

26/06/2023
(Signature and Date)

Endorsements

Faculty Guide
Certificate from Intern Organization
ACKNOWLEDGEMENTS

The journey started as a student towards the professional life with the aim in mind to
learn the practical aspects of life, ended as a memorable experience, also helped me to come
off with flying colors.

No work can be completed without others help or contribution. The preparation of


presentation of this humble work encompasses the immense and unlimited help and stand
through of immemorable people .

My special thanks to Intrainz innovation pvt ltd for providing me the opportunity to
associate myself with them for my training & also like to express my sincere gratitude to them
for providing me the total most valuable guidance and affable treatment given to me at every
stage to boost my morale and helping me in learning law related procedures and activities,
which helped me to add a feather in my cap.

I express my deep & sincere gratitude to my teacher Mr. M Kondaiah (Assistant


professor) for guidance , supervision, expert suggestion & encouragement which helped me
to tide over the hardship encountered during study.

Last but not the least my sincere gratitude to all the people who knowingly or
unknowingly supported me, for my moral to make this internship a reality.
CHAPTER 1: EXECUTIVE SUMMARY

The internship report shall have only a one-page executive summary. It shall include five
or more Learning Objectives and Outcomes achieved, a brief description of the sector of
business and intern organization and summary of all the activities done by the intern
during the period.

Industry internship project is work done by a person which is useful to learn the practical
examples. Internship can help engineering students comprehend what they wish to do in their careers.
Unfortunately , in today’s employment demand, passing exams with impressive grades and earning a
degree doesn’t deliver the much -needed work experience you are required to the accomplish in a work
life. Trough an internship, you will be competent to earn real life exposure.
Objectives of summer industry internship:
Internships provide students with ana opportunity to put into the practice skills they have learned
while the college. In addition, students should have an opportunity to enhance those skills, obtain the
perspective of a work environment and benefits from a mentor or supervisor’s experience and advice.
Outcomes of summer industry internship:
➢ Explore career alternatives prior to graduation.
➢ Integrate theory and practice.
➢ Assess interests and abilities in their field of study.
➢ Learn to appreciate work and its function in the economy.
➢ Develop work habits attitudes necessary for job success.
➢ Develop communication, interpersonal and other critical skills in the job interview process.
➢ Build a record of work experience.
➢ Acquire employment contacts leading directly to a full-time job following graduation from
college.
CHAPTER 2: OVERVIEW OF THE
ORGANIZATION Suggestive contents
A. Introduction of the Organization
B. Vision, Mission and Values of the Organization
C. Policy of the Organization, in relation with the intern role
D. Organizational Structure
E. Roles and responsibilities of the employees in which the intern is placed.
F. Performance of the Organization in terms of turnover, profits, market reach
and market value.
G. Future Plans of the Organization.

Name of the organization: Intrainz Innovation pvt ltd


Intrainz aim to prep university students to become industry ready we do this by providing them
an opportunity to create specialized skill sets for them in domains with high market demand. This is
achieved by our combination of an in-depth industrial training program along with certificate live
internship projects which together enable the student to receive the adequate industrial project
experience in order for them to land a good job in the corporate world.

Vision:
We envision a world where anyone, anywhere has the power to transform their life
through learning.

Mission:
Making our learners achieve their desired outcomes.

➢ Modern-day curriculum-state of the art curriculum and industry-grade projects.


➢ Project experience gain the required industrial project experience essential for placements and
higher studies.
➢ Dedicated mentorship-undergo in-depth upskilling training under the mentorship of
experienced industry professionals.
➢ Up-skilling-create specialized skill sets in domains with the high market value.
CHAPTER 3: INTERNSHIP PART

Description of the Activities/Responsibilities in the Intern Organization during Internship,


which shall include - details of working conditions, weekly work schedule, equipment
used, and tasks performed. This part could end by reflecting on what kind of skills the
intern acquired.
During the internship at the organization, intern will be assigned various activities and
responsibilities, which are designed to provide a valuable learning experience. The details of the working
conditions, weekly work schedule, equipment used, and tasks performed may vary depending upon the
specific organization and industry.

Working conditions:
The working conditions for interns are typically similar to those of regular employees. Interns are
expected to the organization’s policies, dress code, and code of conduct. They may have access to the same
facilities, such as office space, meeting rooms, and common areas. The organization will strire to create a
supportive and inclusive environment that fasters learning and professional growth.

Weekly work schedule:


The weekly work schedule for interns is typically based on the organization’s standard working
hours. This could vary, but it usually consists of 40 hours per week, Monday through Friday. The intern may
be required to work specific shifts or have flexible working hours, depending on the organization need and
the intern’s availability. Breaks and lunch hours will be provided in accordance with local labour laws and
organizational policies.

Skills acquired:
➢ Technical skills related to their field of study or industry.
➢ Communication and interpersonal skills through collaboration with the colleagues.
➢ Time management and organizational skills by handling multiple tasks.
➢ Problem-solving and critical thinking skills by working on real-world challenges.
➢ Adaptability and flexibility in a professional work environment.
ACTIVITY LOG FOR THE FIRST WEEK

DAY LEARNING OUTCOME Person


BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Introduction to the organization's embedded Proficiency in the embedded


system projects and team members system
Day - 1

Familiarization with the organization’s hardware Gain a strong command on the


& software tools used for embedded system tools
Day - 2 development

Attended training sessions on basics of Learned skill-based


microcontrollers and embedded programming programming language
Day - 3

Assisted senior engineers in debugging and Writing efficient and reliable


Day - 4 troubleshooting existing embedded systems. firmware for microcontroller

Conducted research on the latest trends and Research on the trends of the
advancements in embedded system design. embedded system
Day - 5

Worked on the previously given tasks and learned Learned languages such as
Day - 6 about the embedded system c/c++
WEEKLY REPORT

WEEK – 1(From Dt 01/05/2023 To Dt 06/05/2023)

Objectives of the Activity Done:

Detailed Report:

During the first week of my embedded system internship, I familiarized myself with the
company's infrastructure, team members, and the project I would be working on. I had
introductory meetings with my supervisor and teammates, who provided an overview of the
project goals and objectives. I spent time setting up my development environment, including
installing necessary software tools and configuring the required hardware components. I also
started reading documentation and studying relevant codebases to gain a deeper understanding of
the existing embedded systems in the project.
ACTIVITY LOG FOR THE SECOND WEEK

DAY LEARNING OUTCOME Person


BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Collaborated with the development team to Understanding of


Day - 1 design a simple embedded system prototype microcontroller & architecture

Participated in discussions on system Through hands-on experience


Day - 2 requirements and functionality.

Assisted in the selection and integration of The intern should develop a


sensors and actuators for the prototype deep understanding of the
Day - 3 microcontroller

Learned and practiced programming in C/C++ Various components and their


Day - 4 for embedded systems functionalities

Worked on coding assignments to implement Memory organization, and


basic functionality in the embedded prototype input/output mechanisms
Day - 5

Complete structure in the embedded system Self-reflection and professional


Day - 6 growth
WEEKLY REPORT

WEEK – 2 (From Dt 08/05/2023 To Dt 13/05/2023)


Objective of the Activity Done:
Detailed Report:
In the second week, I began working on a specific module within the embedded system. I
collaborated closely with my team members to define the module's requirements and design
specifications. I engaged in discussions to gather insights on the system architecture and
understand the integration points for the module. I started implementing the module, writing code
in the appropriate programming language and utilizing relevant libraries and frameworks. I ran
initial tests to ensure basic functionality and made adjustments based on feedback from my
supervisor and peers.
ACTIVITY LOG FOR THE THIRD WEEK

DAY LEARNING OUTCOME Person


BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Developed and tested firmware for the embedded Knowledge of the embedded
system prototype system development tools
Day - 1

Worked closely with a mentor to understand Become familiar with the


coding standards and best practices intern
Day - 2

Participated in code reviews and provided Learn range of hardware &


Day - 3 feedback on peers' code software tools

Conducted unit testing to ensure the proper Including integrated


functioning of the firmware development environments
Day - 4 (IDEs)

Documented the development process and Compilers, debuggers and


created technical specifications for the prototype simulation/emulation tools
Day - 5

Identifying personal growth, acquired skills Areas for further development


in the field of embedded
Day - 6 system
WEEKLY REPORT

WEEK – 3 (From Dt 15/05/2023 To Dt 20/05/2023)


Objective to the Activity Done:
Detailed Report:
During the third week, I continued my work on the module, focusing on enhancing its
functionality and performance. I utilized debugging tools and techniques to identify and fix any
issues or bugs in the code. I also integrated the module with other components of the embedded
system, collaborating with other developers to ensure smooth interactions and compatibility. I
conducted thorough testing, including unit tests and integration tests, to verify the module's
behavior and validate its integration within the larger system.
ACTIVITY LOG FOR THE FOURTH WEEK

DAY LEARNING OUTCOME Person


BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Explored different communication protocols Practical experience in


commonly used in embedded systems (e.g., designing the embedded
Day - 1 UART, SPI, I2C) system

Integrated communication modules into the By actively participating in the


Day - 2 embedded system prototype design process

Conducted integration testing to verify the Intern should acquire practical


Day - 3 communication between different components skills

Assisted in the development of a graphical user Designing embedded systems


Day - 4 interface (GUI) for the embedded system

Participated in team meetings and provided System architecture design,


progress updates on the project selection & integration of
Day - 5 sensors

Documentation and technical writing Implementation of


Day - 6 communication interface
WEEKLY REPORT

WEEK – 4 (From Dt 22/05/2023 to Dt 27/05/2023)


Objective of the Activity Done:
Detailed Report:
In the fourth week, I shifted my attention to optimizing the module's code and improving its efficiency.
I conducted profiling and benchmarking to identify bottlenecks and areas for improvement. Based on the
findings, I implemented optimizations such as algorithmic improvements, code refactoring, and utilizing
hardware-specific features if applicable. I documented the optimizations made and their impact on
performance. Additionally, I worked on documentation, creating detailed technical specifications, user
guides, and API documentation for the module.
ACTIVITY LOG FOR THE FIFTH WEEK

DAY LEARNING OUTCOME Person


BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Engaged in debugging and troubleshooting Testing & debugging skills


activities to resolve issues in the embedded
Day - 1 system prototype

Assisted in performance optimization of the Develop proficiency in testing


Day - 2 firmware to enhance efficiency & debugging embedded system

Conducted system-level testing to ensure the Unit testing to verify system


Day - 3 prototype meets the desired specifications functionality

Collaborated with the quality assurance team to Integration testing to verify


Day - 4 identify and fix software defects system functionality

Prepared a presentation on the progress of the Troubleshooting to identify


Day - 5 embedded system project for the team and resolve issues

Particularly in the context of embedded system Able to reflect on their


Day - 6 experience
WEEKLY REPORT

WEEK – 5 (From Dt 29/05/2023 To Dt 03/06/2023)


Objective of the Activity Done:
Detailed Report:
During the fifth week, I participated in design reviews and team meetings to provide updates on my
progress and gather feedback. I collaborated with my team members to address any concerns or challenges
and make necessary adjustments to the module. I also conducted additional testing, including stress testing
and edge-case scenarios, to ensure the module's robustness and reliability. I communicated with other teams
involved in the project to discuss dependencies, resolve integration issues, and align on the overall system's
requirements and timelines
ACTIVITY LOG FOR THE SIXTH WEEK

DAY LEARNING OUTCOME Person


BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Explored real-time operating systems (RTOS) Real – time operating systems


and their applications in embedded systems. understanding
Day - 1

Worked on implementing an RTOS into the Intern should gain knowledge


Day - 2 embedded system prototype and practical experience

Conducted testing to evaluate the responsiveness Understanding their role in


Day - 3 and performance of the system with an RTOS managing skills

Assisted in power management optimization for Scheduling and resource


Day - 4 the embedded system allocation in embedded system

Reviewed and improved the documentation, user Develop strong collaboration


Day - 5 manuals, and technical reports & communication skills

Learning how to work effectively as a part of an Through participation in team


Day - 6 embedded system development meetings
WEEKLY REPORT

WEEK – 6 (From Dt 05/06/2023 to Dt 10/06/2023)


Objective of the Activity Done:
Detailed Report:
In the sixth week, I focused on adding new features and extending the capabilities of the
embedded system. I worked closely with stakeholders, including product managers and end-users,
to gather requirements and understand their needs. I brainstormed and proposed solutions,
collaborating with my team to evaluate feasibility and make design decisions. I implemented the
agreed-upon features, following best practices and adhering to coding standards. I conducted
thorough testing and sought feedback from users to ensure the features met their expectations.
ACTIVITY LOG FOR THE SEVENTH WEEK

LEARNING
DAY OUTCOME Person
BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Explored security considerations in embedded systems Awareness of security


Day - 1 and worked on implementing security features consideration

Conducted vulnerability testing and analysis on the Intern should gain an


embedded system prototype understanding of
Day - 2 security consideration

Participated in discussions on secure firmware updates and Including


authentication mechanisms authentication
Day - 3 mechanisms

Assisted in identifying and mitigating potential security Secure firmware


Day - 4 risks in the system updates

Collaborated with the team to refine the prototype based Vulnerability testing
Day - 5 on feedback and testing results

Particularly in the context of embedded system Identify and mitigate


Day - 6 potential risks
WEEKLY REPORT

WEEK – 7 (From Dt 12/06/2023 To Dt 17/06/2023)


Objective of the Activity Done:
Detailed Report:
During the seventh week, I dedicated time to code review sessions, both as a reviewer and a
recipient. I provided constructive feedback to my colleagues on their code, focusing on code
quality, maintainability, and adherence to project guidelines. I also incorporated feedback received
from code reviews on my own code, making necessary improvements and refinements.
Additionally, I continued working on documentation, updating it to reflect the latest changes and
additions in the embedded system.
ACTIVITY LOG FOR THE EIGHTH WEEK

DAY LEARNING OUTCOME Person


BRIEF DESCRIPTION OF THE DAILY
& In-charge
ACTIVITY
DATE Signature

Conducted a final review and testing of the Documentation & technical


Day - 1 embedded system prototype writing

Assisted in preparing documentation, user Develop skills in documenting


Day - 2 manuals, and technical reports the development process

Participated in project wrap-up meetings and Creating technical


Day - 3 provided insights on lessons learned specifications

Presented the completed embedded system Writing user manuals, and the
Day - 4 project to the team and stakeholders preparing technical reports

Reflect on the internship experience, identifying Effectively communicate their


personal growth and acquired skills in embedded work & findings
Day - 5 system development

Proficiency in embedded the programming Experience in firmware


Day - 6 language development
WEEKLY REPORT

WEEK – 8 (From Dt 19/06/2023 to Dt 24/06/2023)


Objective of the Activity Done:
Detailed Report:
In the final week of my internship, I focused on finalizing my work and preparing for the
project handover. I conducted extensive testing and quality assurance to ensure the stability and
reliability of the embedded system. I addressed any remaining issues or bugs, striving for a
polished and error-free product. I prepared comprehensive documentation, including release notes
and installation instructions. I presented my work to the team and stakeholders.
CHAPTER 5: OUTCOMES DESCRIPTION

Work environment experienced (in terms of people interactions, facilities available


and maintenance, clarity of job roles, protocols, procedures, processes, discipline, time
management, harmonious relationships, socialization, mutual support and teamwork,
motivation, space and ventilation, etc.)

During my embedded systems internship. I achieved several outcomes that contributed to my


professional growth and understanding of the field. Here are some key outcomes I accomplished
1) Hand-on experience : through my internship, gained practical , hands-on experience in
developing embedded systems, I had the opportunity to work on real word projects.
2) Knowledge of embedded systems concepts: the internship provided me with a solid
function in embedded systems concept and principles. I learned about microcontroller, sensors,
actuators, and various communication protocols commonly used in embedded system
development.
3) Project collaboration: throughout the internship, I collaborated with a team of engineers on
embedded system. This experience taught me how to effectively work in a team environment,
communicate ideas, and solve problems collectively.
Overall, my embedded system internship provided me with a comprehensive understanding of the
field, practical skills, and the confidence. To tackle embedded system internship challenges. These
outcomes have prepared me for future endears in embedded systems development and laid a strong
foundation for my career in this domain
The real time technical skills acquired are (n terms of the job-related skills and
hands on experience)

In embedded system internship, I acquired several real-time technical skills that are valuable in the
field. Here are some of the key technical skills I developed:
1) Microcontroller programming
2) Embedded systems design
3) Real-time operating systems(RTOS)
4) Device drivers and hardware interfacing
5) Interrupt handling and event-driven programing
6) Low-level hardware control
7) Embedded communications
8) Debugging and testing
9) Real-time system performance analysis
10) Hardware /software co-design

These real-time technical skills acquired during my embedded systems internship provide a strong
foundation for developing the robust and efficient embedded systems, and they are highly relevant in
industries such as automotive, robotics, IoT, and industrial automation.
The managerial skills acquired are (in terms of planning, leadership, team work,
behavior, workmanship, productive use of time, weekly improvement in competencies,
goal setting, decision making, performance analysis, etc.

In an embedded system internship, managerial skills play a vital role in ensuring the successful
execution of projects and effective team coordination. Here are some important managerial skills that
are particularly relevant to an embedded system internship:
1) Project Planning and Organization: As an intern in an embedded system internship, it's
crucial to possess skills in project planning and organization. This involves creating a clear
roadmap, defining project goals and objectives, allocating resources, and setting realistic timelines
for project completion.
2) Communication and Collaboration: Effective communication is key to managing an
embedded system internship. Managers must have strong verbal and written communication skills
to convey project requirements, expectations, and updates to team members and stakeholders.
3) Leadership and Team Management: Strong leadership skills are essential for managing
an embedded system internship. Managers should be able to inspire and motivate team members,
provide guidance, and resolve conflicts that may arise during the internship.
4) Problem Solving and Decision Making: Embedded system projects often involve complex
technical challenges. Managers need to possess strong problem-solving skills.
Methods to improve communication skills (in terms of improvement in oral
communication, written communication, conversational abilities, confidence levels while
communicating, anxiety management, understanding others, getting understood by
others, extempore speech, ability to articulate the key points, closing the conversation,
maintaining niceties and protocols, greeting, thanking and appreciating others, etc.,)

1) Active listening:
Actively listening is crucial for effective communication. Give your full attention to the
speaker, maintain eye contact, and avoid the interrupting. Practice active listening by
summarizing or paraphrasing what the speakers said.
2) Seeking feedback:
Actively seeking feedback from your supervisor or colleges regarding your
communication skills.
3) Practice clear & concise expression:
Clearly expressing your thoughts and ideas is vital for effective communication.
4) Non-verbal communication :
Non-verbal cues, such as facial expressions, body language, and gestures, significantly
impact communication.
5) Written communication:
Written communication is often a significant part of internship. Improve your written
communication skills by proofreading your emails, reports or any writte n documents
before sending them.
Methods to enhance abilities in group discussions, participation in teams,
contribution as a team member, leading a team/activity.
To enhance your abilities in group discussions, participation in terms, contribution as a team member,
and leading a team/activity, consider the following strategies:

1) Actively engage in group discussions:


• Prepare beforehand
• Listen attentively
• Ask clarifying questions
• Encourage participation
2) Contribute as a team member:
• Understand team goals
• Collaborate and share responsibilities
• Be reliable and accountable
• Support fellow team members
3) Leadership in team activities:
• Lead by example
• Communicate effectively
• Delegate tasks
• Facilitate collaboration
• Resolve conflicts
4) Continuous improvement:
• Seek feedback
• Reflect on experience and develop relevant skills.
Methods to improve technological developments observed and
relevant to the subject area of training (focus on digital technologies
relevant to your job role)

1) Edge computing: with the growing need for real-time data processing and reduced latency,
edge computing has gained prominence. It involves processing data closer to the source, at the
edge of the network, rather than solely on cloud based services.
2) Artificial intelligence(AI) and machine learning(ML): the integration of AI and ML
techniques with embedded systems has expended the capabilities of these devices. Embedded
systems are now being used to display AL algorithms for various applications such as computer
vision, natural language processing and predictive analytics.
3) Security and safety: as embedded systems become more interconnected and pervasive,
ensuring security and safety has become crucial.
4) Wireless connectivity standards: wireless communication standards continue to evolve,
enabling embedded systems to connect and communicate seamlessly. Developments such as
Bluetooth law energy, wifi 6, and 5G cellular networks have expanded the possibilities for
embedded systems applications.

5) Real-time operating systems(RTOS): real-time operating system continue to evolve ,


offering enhanced features and capabilities for embedded systems.
Student Self Evaluation of the Short-Term Internship

Student Name: & Registration No: Tenali. Abhinaya Keerthi [203R1A0402]

Term of Internship: From 01/05/2023 To 25/06/2023

Date of Evaluation:26/06/2023

Organization Name& Address: Intrainz Innovation Pvt Ltd (Bangalore)

Name & Address of the Supervisor Mr. V Suneel Reddy (Associate professor)
with Mobile Number: 9440216142

Please rate your performance in the following areas:

Rating Scale: Letter grade of CGPA calculation to be provided

1) Oral communication 1 2 3 4 5

{2) Written communication 1 2 3 4 5

3) Initiative 1 2 3 4 5

4) Interaction with staff 1 2 3 4 5

5) Attitude 1 2 3 4 5

6) Dependability 1 2 3 4 5

7) Ability to learn 1 2 3 4 5

8) Planning and organization 1 2 3 4 5

9) Professionalism 1 2 3 4 5

10) Creativity 1 2 3 4 5

11) Quality of work 1 2 3 4 5

12) Productivity 1 2 3 4 5

13) Progress of learning 1 2 3 4 5

14) Adaptability to organization’s culture/policies 1 2 3 4 5

15) OVERALL PERFORMANCE 1 2 3 4 5

Signature of the Student


Evaluation by the Supervisor of the Intern Organisation

Student Name: & Registration No: Tenali. Abhinaya Keerthi [203R1A0402]

Term of Internship: From 01/05/2023 To 25/06/2023

Date of Evaluation: 26/06/2023

Organization Name& Address: Intrainz Innovation Pvt Ltd (Bangalore)

Name & Address of the Supervisor: Mr. V Suneel Reddy (Associate professor)
with Mobile Number: 9440216142

Please rate the student’s performance in the following areas:

Please note that your evaluation shall be done independent of the Student’s self-evaluation

Rating Scale: 1 is lowest and 5 is highest rank

1) Oral communication 1 2 3 4 5

2) Written communication 1 2 3 4 5

3) Initiative 1 2 3 4 5

4) Interaction with staff 1 2 3 4 5

5) Attitude 1 2 3 4 5

6) Dependability 1 2 3 4 5

7) Ability to learn 1 2 3 4 5

8) Planning and organization 1 2 3 4 5

9) Professionalism 1 2 3 4 5

10) Creativity 1 2 3 4 5

11) Quality of work 1 2 3 4 5

12) Productivity 1 2 3 4 5

13) Progress of learning 1 2 3 4 5

14) Adaptability to organization’s culture/policies 1 2 3 4 5

15) OVERALL PERFORMANCE 1 2 3 4 5

Signature of the Supervisor

You might also like