cmsv6 Dashcam
cmsv6 Dashcam
OVERVIEW PARAMETER
�gth/button
Size 84. 5 mm*56.3mm*27.3mm
We ight 140g(0.31lb}
- Front big Record button and top Record button easy operation
Button - Yellow PTT button
- Yellow SOS button
USB IP Rating:IP67
/Headphone
LCD port
HOV 140 degrees
Up/Left �--+-fflf-- Down/Right Tagging 10B0P30 ( Chipsets support 4K,limit to 1080 for lower power
button._......,._.___ button /SOS button Video Resolution consumption)/ 10B0P60 / 720P30 / 720P60 / 480P30
Vide o Streaming Reso lution 720P30 / 480P30 / 320P30
Menu
/ Confrm Back Audio Streaming:Support Text Streaming:Support
button / Video replay Streaming Bitrate:300kbs-4M kbs Snap Shot:During recording
button
Vide o Format:MP4 Picture format:JPE G Audio Format:AAC
EIS 6 axis image stabilizer(Optional)
SOS Audio alarm activates in all cameras at same group and audio
alarm in command eerier
Wi-Fi
. . .. .. 2.4G, AP/STA/P2P,Wi-Fi channel can be set by cam manager
:
�
If •1,0.:H tlol
ml
/ / Press Press to turn on/off LCD
Power
I R: 10 meters (2 IR LED) GPS/NFC:Optional
/
I Button Hold for 3
seconds Hold to turn on/off camera
/
Optional (camera talk to camera.camera talk to command canter, REC
GD
Clustered Press Start/Stop video recording
Talkback(PTT) command talk to cameras);can set cameras to groups from Button
camera GUI or from command center software Hold for 3 Start video recording when camera is off.
on Top seconds In preview mode, hold to switch video resolution.
SOS button to activate warning signal in camera and in command
Alarm canter and advise command canter the position of camera REC
l!i)
Press Start/Stop video recording
Text message Camera can send text message to camera or command canter Button
Hold for 3 Start video recording when camera is off
on Front
e
l:.i1hlhhhll seconds
TCP/IP, RTSP, RTMP, GB/28181/JSON
l;fe.lWli'l' Press Start/Stop aud io recording
Audio
- 1080P Up to 14 Hours;480P Up to 16 Hours Button Hold for 3 Start aud io recordinP, when camera
Recording Time seconds is off; Turn on/off aser pointer
- GPS and WiFi on at 480P30 12 hours and 30 minutes
I
mn
Standby Time:100+ hours Charging Time:4 hours
I Press Take photo
........
Streaming&Recording time 7.5 hours Photo
Button Hold for 3
m
I:. r:..r; , ,,....,. · seconds Turnon/off the red & blue warning light
Pre-recording 30 seconds to 60 seconds varies from resolution settings
Post-recording 30 seconds to 60 seconds from resolution settings Press Turn on/off infra red LED
lnfrared
Motion Detect Support Button Hold for 3 Turn on/off wh ite LED flashl ight
a
e t1U1""•��1l seconds
AES256 encryption during writing files to memory card PTT Button Holding for Push to talk
File Encryption 3 seconds
AES256 encryption RTSP Video/audioffext streaming data
Mark the important video while
Network Security Https&Http Server Press video recording
..... ....
Wi-Fi Security Dynamic Pin Code authentification SOS Button
Hold for 3 Turn on SOS function
■L--.:.... , ; I ' seconds
B
- all camera settings available under mass storage mode
- all camera settings available under USB simple mode Press Exit to previous interface
Playbac k
- USB heart beat available Button Hold for 3
m
- Control over LED/buzzer available under mass storage mode seconds Directly playback the latest recorded file.
- Ambarella driver free even while USB encryption activated
- Support driver free connection to computer Menu Press
aa
Menu; Confirm
l,'J 111111-.; 111111 1111
Standard mount 360 degrees rotatable crocodile mount Scroll Up Press Scroll up or left/Scroll down or right
Optional mount MOLLE compatilbe mount /Down
Hold for 3
I Buttons Zoom in/Zoom out
...... . ......,, .
Optional accessoires CLICKFAST Stud seconds
Content supported
l!.I
I User ID/Device ID/Date/Time/Geo-tags/Logo
Reset
ml GD Hold for 3
seconds
Reset the camera when holding power
button & the video record button on the top
I'
FUNCTIONALITIES FUNCTIONALITIES
Notice: If camera is in recording mode, the video will be stored
properly then camera turn off.
Turn on/off LCD: When camera is on, press ml to turn on / off the
backlight of LCD screen.
2. Video Recording
When camera is in standby mode: If camera is in standby mode
(power on but not recording), press GD
to start recording, press GD
again to stop recording.
1. Power On/Off
ml to turn on the camera. The When camera is off: Hold GD , camera will turn on and start recording
Power on: When camera is off, hold
turn on indication as below:
automatically, press GD again to stop recording.
Power off: When camera is on, hold ml to turn off the camera. The Default password: For general user default password is 000000, user
can only check settings, but can not change settings.
turn off indication as below:
For administrator default password is 888888, user are able to change
settings. To change password, please use Cam Manager.
• Camera LCD will show turn-off logo, LCD goes black
• Camera status Indicator will turn off 1) Resolution
• Turn-off music There are six options to select from:
25GOX144O 3OP/ 192OX1O8O GOP/ 192OX1O8O 3OP/ 128OX72O GOP/
• Camera vibrate
128OX72O 3OP/ 848X48O 3OP
■+-
FUNCTIONALITIES FUNCTIONALITIES
(2) Quality (S)Streaming Frame Rate
There are three options to select from: S. Fine / Fine / Normal
There are six options to select from: 5FPS / 10FPS / 15FPS / 20FPS /
(3) Photo Size 25FPS / 30FPS
There are six options to select from: 4M/SM/12M / 16M / 30M / 40M
(9) Streaming Bit-rate
(4) Selfie There are seven options to select from: 300kbps / 500kbps /
There are four options to select from: Off/3 sec/5 sec/10 sec 1000kbps 12000kbps 13000kbps 14000kbps 15000kbps
Press�, camera will take a photo after the selected time period. (10) Streaming Control
There are six options to select from: Off/Video/Audio/Text/
(5) Timelapse
Audio and Video / All
There are six options to select from:
Off / ½ sec I 1 sec I 3 sec I 5 sec I 10 sec
Notice: Select off to turn off all streaming.
Press�, camera will keep taking photos until you press � again.
Photos will be taken intermittently with the selected time period. (11) H265 Encoding
There are two options to select from: Off/On
(6) Burst Mode
There are eight options to select from: (12) Pre Record
Off/2 pcs / 3 pcs / 5 pcs / 10 pcs / 15 pcs / 20 pcs / 30 pcs There are eight options to select from:
Off/5 sec/10 sec/15 sec/20 sec/30 sec/60 sec/2min
Press�, the selected quantity of photos will be captured
continuously. Camera will record 5sec-2min of video prior to record button being
pressed to start recording.
(7) Streaming Resolution
There are three options to select from: (13) Loop Record
1280X720 30P / 848X480 30P / 432x240 30P There are two options to select from: On I Off
FUNCTIONALITIES FUNCTIONALITIES
When loop recording is set "On", it provides a way to let camera keep (18) Record Notification
recording when memory space is full, because the oldest file will be There are six options to select from: On/ 5 sec/ 10 sec/ 15 sec/ 30
overwritten by the latest file. sec/ 60 sec
(14) Post Record Recording Notification will give audio beeping at the specified interval
There are six options to select from: as long as the camera is recording. This will not affect the notifications
Off/ 5 sec/ 10 sec/ 20 sec/ 30 sec/ 60 sec/120 sec at the start and end of recordings.
Camera will record 5-120sec after record button being pressed to stop (19) Motion Detect
recording. There are two options to select from: On/ Off
Notice: Set to Off, video will be split into 30 minutes video interval.
5. Screenshot
To capture picture while video is being recorded, just single- press�
(17) Mute Recording
There are three options to select from: Off/ Only Pre-record/ On
6. Audio Recording
In Preview Mode, press B, and the camera will start audio recording.
Audio won't be recorded when mute recording is on; If Only Pre
record chosen, then only the pre-recorded video will be muted. Press B again to stop audio recording.
I•
FUNCTIONALITIES FUNCTIONALITIES
One key audio recording: When camera is off, hold D for 3 seconds, 9. Playback
camera will turn on and start audio recording right away. Press D In Preview Mode, press, and find "Video, Photo, Audio", all files
again to stop audio recording.
recorded can be browsed.
a,
7. File Tagging
While video is being recorded, press there will be a� icon 10. One Key Playback
show on the LCD screen, the video will be tagged as important file. In Preview Mode, press and hold to check the last file recorded.
Press GD to stop recording, video will be saved as important video.
m
11. Data Upload
In preview mode, press , input the right password to enter setting
menu, select the "Data Upload" icon and pressmagain to go to video
upload interface.
(2) When camera is audio recording, press GD to stop audio 12. General Settin9.L
recording and start video recording. The audio will be stored properly
then switch to video recording.
In preview mode, press W,
menu, select the "General" icon and press
list.
m
input the right password to enter setting
again to go to setting
MfW
FUNCTIONALITIES FUNCTIONALITIES
Default password: For general user default password is 000000, user Recording Auto: Only during video recording, infrared LED will be
can only check settings, but can not change settings. turned on/ off automatically according to the environment light
For administrator default password is 888888, user are able to change condition.
settings. To change password, please use Cam Manager.
(6) Auto Power Off
(1) Language Setting
There are seven options to select from:
There are three options to select from: English, 1'11Jf;$cl=IX (Simple Off/30 sec/1 min / 3 min / 5 min / 10 min / 30 min
Chinese), Ting vit nam (Vietnamese)
Auto Power Off will only power off the device when it has been in
(2) TV OUT standby mode for the selected interval. This will NOT power off the
There are two options to select from: NTSC / PAL device during recordings.
(4) Vibration
LCD Auto Off will turn off LCD display for the selected interval. This
There are two options to select from: On/Off will NOT power off the device.
Manual: Press
off infrared LED.
m
Off: lnfrared LED disabled.
, to turn on infrared LED, Pressm again to turn
(9) Voice Volume
There are eleven options to select from:
0/1/2/3/4/5/6/7/8/9/10
Auto: lnfrared LED will be turned on/ off automatically according to
the environment light condition. When environment light condition is (10) Voice Remind
dark, infrared LED will be turned on automatically; When environment There are three options to select from: Off/ Beep/Speech
light condition is bright, infrared LED will be turned off automatically.
MCI
FUNCTIONALITIES FUNCTIONALITIES
(11) Clock Beep On: A password is required, when user want to go to Menu mode.
There are two options to select from: On I Off Default password: For general user default password is 000000, user
On: Once time is full clock, camera will beep. can only check settings, but can not change settings.
Off: Once time is full clock, camera will not beep. For administrator default password is 888888, user are able to change
settings. To change password, please use Cam Manager.
(12) LED Light
There are two options to select from: On I Off Off: No password is required to go to Menu mode.
On: LED indicator will be on.
Off: LED indicator will be disabled.
(18) wifi
There are three options to select from: WIFI/ Power-up Start I Mode
(13) CarDV Mode a. WIFI: On/ Off
There are two options to select from: On I Off
On: WIFI enabled.
CarDV Mode means camera will power on automatically and start Off: WIFI disabled.
recording after connected to power source such as car charger.
b. Power-up Start: Off/ Auto I Manual
(14) File Tagging Off: WIFI will not turn on automatically once camera is powered on.
There are six options to select from: Auto: WIFI will be turned on automatically once camera is powered
Normal I Traffic I DWI/ Confidential/ Criminal/ Other on.
Manual: WIFI needs to be turned on/off manually.
(15) Stealth Mode
There are two options to select from: On I Off
On: Turn off all LED indicators, IR LED and all prompt sound. c. Mode:AP/ Station/ Direct
Off: All LED indicators, IR LED and all prompt sound will be normal
settings. (19) Change Device ID
Set the Device ID you would like to have.
(16) Enhanced Standby
There are two options to select from: On I Off
(20) Change User ID
(17) Password Mode Set the User ID you would like to have.
-,w
There are two options to select from: On I Off
FUNCTIONALITIES FUNCTIONALITIES
Available Space, Remaining Video, Remaining Audio, Remaining Photos, 2.SOS Button: When is turned on, hold B to send an alarm
(includes alarm & GPS information) to the platform headquarter or
Battery Status, Temperature, Server IP, Server Port, Account, module, theAPP.
15. Reset
IMEI, APN, IP, Signal, WLAN MAC, WLAN SSID, WLAN IP, Serial Number, Resetting camera will power off the camera forcibly, it helps when the
camera is down.
Hardware Version and Firmware Version .
Hold E!J (Record button on the top) and tgJ together for 3 to 5
seconds, camera will reset.
@1:@
FUNCTIONALITIES FUNCTIONALITIES
16. Charging 17. Headset
Please charge camera via USB cable and wall charger provided. The Please use the headset(optional accessory) provided. Camera will
battery used in camera is Polymer Lithium type. When camera is fully automatically go to headset mode, once headset is plugged in the
headset hole. Hold the control button on the headset, camera will start
charged, blue charging indicator will turn off.
PTT communication. Once headset is plugged out, camera will be
back to normal mode.
There are 2 ways of charging:
1. Connect camera to computer via USB cable 18. External Camera
Since the current of different computer's USB port varies from each Once the external camera is connected to camera via USB port,
other, it is normal if there are circumstances that camera can not be camera LCD will show the image from external camera. External
fully charged. camera unplugged, the image in camera LCD will be switched to
image captured by main camera.
Optional Dock
Charging
Data
Transferrin Data Transferring
■PI
CAM MANAGER CAM MANAGER
Installing the Camera Management Software allows for viewing and 3. Camera Info
downloading saved photos and videos, changing device settings, and After login, the Camera Management Software will open on the
syncing date and time. Camera Info tab.
1. Software Requirements
Windows 7,8, or 10 operation system
Hard drive storage for archiving video (1TB recommended) camera Info Networ1t Setmos Cimera SettiuJs Other Settr,gs Encrypt»n Pa5Sword
"""'�'°
ModoNo, �-•CJ e.-code: �7006C6FE
2. Cam Manager Login
1. Open the " Cam Manager " software on your computer. Connect
camera to computer via USB cable. Your camera will power on and "'''""'' §:" =7
get connected to computer. u�ro, [moo ---=i
2. There are 2 user types: Bamry�ft:: [89% C1.15IOOIIZ1!dWaterMri: L
(1) General User: This mode allows for viewing and downloading
media files only. The default password is: 000000
S,nc?CDatrfflfMc camttaOff
Reconnect Ext
Password:�
----�
(1) Under "Other"
There are settings of: Device ID, User ID, Firmware version, Battery
Login Cancel Left level, free space and Watermark. Making changes by enter new
settings into the white textbox, click "Apply" to save the settings.
CAM MANAGER CAM MANAGER
(2) Click "Refresh" button to refresh the battery status;
(3) Click "Sync PC Date Time" to sync the camera's date & time to the
computer's. camera Info r�etwork Setmgs camera Setmgs Other Setmos Encrvt>tion Password
(4) Click "Open File Explorer" to get access to camera SD card mass J Protocol: Cloo<flMS V
Sever ,i,rea: 0.,.,
Chrnel: 2,1G
4. Network Settings SSID: ]llod)Cll'II_DMT22 Password: 112345678 Refrest, �
(1) Under "Server Config", user can change Device Name, Protocol, STASeltn9
Server URL, Server IP, Server Port, Account and password. Auto Get IP: On SSID: [§tt.er� j Password� �te __I
Refresti �
Making changes by enter new settings into the white textbox, click
,.,
"Apply" to confirm the setting. PINCode: �5678 =7 Refre41 Apply
..,,....., L ]
(2) WIFI lslkModc: Off ..., Ad!tess: �i'DD6C6ff ] Paw Name:
Refresh �
Auto: WIFI will be turned on automatically once camera is powered
on.
Reconnl!Ct Exit
Manual: WIFI needs to be turned on/off manually.
C. In AP Setting, user can change WIFI SSID & WIFI Password by
B. Mode: AP / Station / Direct
inputting new WIFI SSID in the "SSID" textbox and new password in
AP: User can check the video streaming using WIFI APP.
the "Password" textbox, click "Apply" to save the settings.
Station: Camera can get connected to WIFI hotspot and make live
video streaming through special software. D. In STA Setting, user can change WIFI SSID & WIFI Password by
Direct: Camera make video streaming and short distance video inputting new WIFI SSID in the "SSID" textbox and new password in
transfer by using WIFI direct function on smart phone. the "Password" textbox, click "Apply" to save the settings.
WJI
CAM MANAGER CAM MANAGER
E. In Direct mode, user can check the WIFI Password. To change
password, just input new password in the "Pin Code" textbox, click
"Apply" to save the settings.
camera Info Networ1c Settrlgs Cuner.11 Settrigs other Settrlgs Enciyption Password
MM'IResolilion: l92C•1080(P30) lmageQuallty:H!tl
Streamric;iResolition: 432'"210 StreanrigBittate: IOOCIKbs
SIJClll"llngl'J.!in'!tRatt:: JCR>S i"\Jtt:Rttolding: Off
Sttea,rw,gControi: A.V VideoSpl,tter:5rr«'I
ReairdngPr�: Off PreRccord: Off
PMtRttord: Off wo!,bs«wr: HttDS
Ph:)tDSize: +I Interv� Photograph: Off
PhotoQJallt}': � 'l'OUTle: 10
5. Camera Settings FlxstMode: Off
Click the "Camera Settings" tab in the Camera Management Software. ��Modi!: Off � Taogng: tbmal
TVOJt: NTSC AutoPo\lie'Off: Off
TvneZOnt: UfCi-0.0 Datt: FOffllat: rrtY,""1-00
From here you can change device settings. Select the setting you hJtoIR: Marual AudloPrarrot: Beep
wish to change, and a drop down will appear with all available options. IRSematrrit')': 5 Screen Save: OFF
EncodnoForat11t: H264 OlairgeState: FastState
Select the setting you want. Click "Apply" to update settings with the �ElS:Off OotbdClift«ord: On
new chosen options. GPS: On □ Powes an AutG-Record:00n Ood:Prompt:00n
KtyTone: 52)on AIJtDTrner-Sync:Oon 1/crabonPrompt: Eaon
□ Da:11 C«nO"a Mode: 00n MobonDctedlon:Q0n
□
�lon,;iStard>y: 0n
Main Resolution LBJlooc.llDr: 52)on l�RKOrting: on Mem0rt Wamog: !;2jon
stealth Mode:: Don Bectnr::Warflng:0on
Click the "Main Resolution" drop down. There are six settings to
choose from: 25GOx1440 30P / 1920x 1080 GOP/ 1920x 1080 30P /
1280x720 GOP/ 1280x720 30P / 848x480 30P
Reconnect
WlW
CAM MANAGER CAM MANAGER
Streaming Bitrate Recording Notification
Click the"Streaming Bitrate" drop down. There are seven settings to Click the"Recording Notification" drop down. There are six settings to
choose from: 5000Kbs / 4000Kbs / 3000Kbs / 2000Kbs /1000Kbs / choose from: Off/ 5sec/10sec/15sec/ 30sec/ 60sec
500Kbs / 300Kbs
Click the setting you prefer and click"Apply" to save.
Click the setting you prefer and click"Apply" to save.
Note: Recording Notification will give audio chirps at the specified
Streaming Frame Rate interval as long as the camera is recording. This will not affect the
Click the"Streaming Frame Rate" drop down. There are six settings to notifications at the start and end of recordings.
choose from: 5 FPS/10 FPS/15 FPS/ 20 FPS/ 25 FPS/ 30 FPS
Pre Record
Click the setting you prefer and click "Apply" to save. Click the"Pre Record" drop down. When checked with a second
amount, the camera will record 5-120 seconds of video prior to Video
Mute Recording Recording button being pressed.
Click the"Mute Recording" drop down. There are three settings to There are eight setting to choose from: Off/ 5sec /10sec/15sec /
choose from: Off/ On / Pre-recorded 20sec/ 30sec/ 60sec/120sec
Click the setting you prefer and click"Apply" to save. Click the setting you prefer and click"Apply" to save.
Streaming Control
Post Record
Click the"Streaming Control" drop down, There are six settings to
Click the"Post Record" drop down. There are six settings to choose
choose from: OFF / Audio / Video /AV/ Text/ ALL
from: Off/ 5sec/10sec/ 20sec/ 30sec/ 60sec
Click the setting you prefer and click"Apply" to save.
Click the setting you prefer and click"Apply" to save.
Video Splitter
Click the" Video Splitter" drop down. There are five settings to choose Note: The camera will record extra set length of video after Video
from: Off(Videos will be in segment of 30 minutes)/ 2min / 5min Recording button being pressed.
/10min/15min
Web Server
Click the setting you prefer and click"Apply" to save. Click the"Web Server" drop down. There are four settings to choose
from: Off/ Http/ Https / Http & Https
Note: Video splitter refers to the length of video segments while the
device is recording. The minute amount is the length of each video Click the setting you prefer and click"Apply" to save.
segment before the device begins a new video file. This will NOT stop
the device from recording, it will just split your videos into smaller, Note: Files recorded can be browsed via web server when WiFi is
more manageable files. turned on.
WJ:M
CAM MANAGER CAM MANAGER
Photo Size Display Brightness
Click the "Photo Size" drop down. There are six settings to choose Click the "Display Brightness" drop down.
from: 40M/30M/ 16M/ 12M/SM/4M
Click the setting you prefer and click "Apply" to save.
Click the setting you prefer and click "Apply" to save.
Click the setting you prefer and click "Apply" to save. TV Out
Click the "Video Standard" drop down. There are two settings to
Volume choose from: NTSC / PAL
Click the "Volume" drop down. Select the volume number you prefer
and click "Apply" to save. 1 is the lowest speaker volume, and 10 is
Click the setting you prefer and click "Apply" to save.
the largest.
Click the setting you prefer and click "Apply" to save. Click the setting you prefer and click "Apply" to save.
IR Sensitivity
Click the "IR Sensitivity" drop down. Click the setting you prefer and Double Click Record
click "Apply" to save. Click the "Video EIS" drop down. There are two settings to choose
from: Off/ On
LCD Auto Off
Click the "LCD Auto Off " drop down. There are six settings to choose
from: Off/ 10 sec/ 30 sec/ 1 min / 3 min / 5 min Click the setting you prefer and click "Apply" to save.
Click the setting you prefer and click "Apply" to save. GPS
Click the "GPS" box to turn GPS on or off. When checked, GPS will be
Encoding Format turned on. Please make sure GPS module is included in the camera.
Click the "Encoding Format " drop down. There are two settings to Turn on camera, when GPS signal is received, GPS icon will turn
choose from: H.265 I H.264
green � , and then GPS coordinates will be created as watermark of
Click the setting you prefer and click "Apply" to save. video.
WfW
CAM MANAGER CAM MANAGER
Power-on Auto Record Motion Detection
Click the "Power-on Auto Record" box to get camera to starting Click the "Motion Detection" box to turn on motion detection, uncheck
recording automatically after powered on. to turn off.
WEN
CAM MANAGER CAM MANAGER
Cilllli!l'ii Info tl!!twork [email protected] Cilmeril Setttiq� other Settilgs Enaypb::m Pilssword
camera Info Network Settflgs camera Settil<;is Otller Settilgs Encryption P assword
Change Passw«d
Refresh
I.Jsl.'fType: Gener�User
AdminLogi,Password: c______J
Click the "Data Encryption" drop down. There are four settings to Reente!'NewPassword: c______J
choose from:
Off/ File Encryption / Streaming Encryption / Both
From here you can change device passwords. Select the user type for
Decryption Play the password that you wish to change. Enter the admin password,
Click the "Decryption Play" drop down. There are two settings to then enter the new password you wish to set for the user type, and
choose from: Off/ On confirm the password.
Note: When choose on, user are able to display encrypted video in Click "Apply" to save the new password.
camera playback mode.
Note: Passwords can only be changed while logged in with the admin
AES Key account. The admin password will always be required to make
To change AES Key, just input the new AES Key in the text box. The changes to any account passwords.
AES Key is consist of letters & numbers.
WfW WtW
CMSV6 SOFTEARE CMSV6 SOFTEARE
How to connect body camera to CMSV6 4. Find "Server Port" under "Server Config", default setting is 6608, no
Note: The CMSV6 software is only for WIFI version camera. need to change.
5. Find "APN" , input the APN of the SIM card, click "Apply" to save
1. Connect to CMSV6 the setting.
1. Open cam manager, Click "Network Settings" tap, then Click "WIFI
Start" drop down, which is under "WIFI".
Choose "Always On", click "Apply" to save the setting. Click "Mode"
drop down, which is under "WI FI", choose "STA", then click "Apply" to
save the setting.
2. Find "STA Mode" under "WIFI", input the right WIFI name in the
"SSID" textbox, input the right WIFI password in the "Password"
textbox, click "Apply'' to save the setting.
2. Find "Server IP" under "Server Config", input the server IP provided
'""1-• vl�
by our company, click "Apply" to save the setting.
''"""''E.. ----=i
Sttve< [ru§",.,. ===:::J
G:I R� password 0Logr, a.rtomabcaly
3. Find "Account" under "Server Config", input the account provided by
Wt=■
our company, click "Apply" to save the setting.
CMSV6 SOFTEARE CMSV6 SOFTEARE
4. How to use the CMSV6 Monitor: CMSV6 platform can check the video and audio from
camera only.
Broadcast: CMSV6 platform can send audio broadcast to one or
multiple cameras.
(1) Choose the camera from camera list (Under Organization), right
click the mouse, choose "Start Intercom" or "Start Monitor". Then right
click the mouse, choose "Stop Intercom" or "Stop Monitor".
I�
,�0 -�- -
�-�+�
/'gan. "'"""'.
I"" dispatdj
1
All @Onlne Q Offine
El · DO Monitor Center(S}
; 0 i� P.MElROPOLITANA{0)
□
$··· Q dddmt
□
$··· Q dddmt2
1. Camera List lilDlm" . 0
The camera status will be shown in the camera list. 1±1--D IdmtoC Start Intercom
Start Monitor
Blue icon refers to camera online and GPS signal received;
Pink icon refers to camera online but GPS signal is not received yet; (2) Find Intercom/Monitor under "VOiP", click "Open" button, then
Blue icon refers to camera offline. choose the camera you need to work with, click "OK" to confirm. To
2. PTT Audio control shows the information of the selected cameras: .---------------,
stop, just click "Stop" button.
Status PTZ Color VOIP
Status: The camera basic info: Officer Name, Police Number, Vehicle
ID, Organization, Online status, Positioning Time, Location, Battery Qintercom @Monitor QB<oadcast
Power.
PTZ: Not available
Color: Not available
VOiP: There are 3 modes, Intercom, Monitor and broadcast. �
Intercom: Camera can have two way communication with CMSV6 dmto!O(Mic)
platform. If PTT button is pushed, camera will transfer voice to CMSV6
platform. Open
CMSV6 SOFTEARE CMSV6 SOFTEARE
(3) Choose the camera on the maps, and click the "Intercom" or 5. Voice Dispatch
"Monitor'' to start intercom or monitor. Choose "Voice dispatch" to make group voice talk.
i"'oo . .
• Dc.J dddmt2{lh1; �OUO)
• .01 chltOOI
t1-OI cht002
Li ....-='c.Ji,,,w,fTl"o,g,CllA)]
·
·I� Get other camera into the PTT group [I]
Get the camera out of the PTT group [I]
Ll OI d,,tll10[fus'TOl4') tfnw;orQUI)]
wDI d,,til11[Ths!,Toup)
t2[Ths,oroupJ
□
:�
w I chw12[Th,:q;,oupJ
• ,...., I chtot3[Ths,;,ouo)
. -1 chto11
• □□ ��t.wi('rh,s ,,,.OI.Cl
'++.!!,="i,r,,.,
;---.,
., ..,1
0
I dmto!0(This9100.0J
01 dmtoll(Tt,is',1100-I)]
Choose the cameras that you I ike to send messages to, input
01 dml012[ThsQrouP]
01 �t013rn.sorOUP]
the text and send. Messages will be shown on the chosen
Sta11J:5 PTZ CObr 'o'OIP
DI �t014 camera's LCD screen. �
'10
Cl,,.]pmeuop,:atn,[Ths,,,.oup)
lntffCOffl 0Morm" I @�tl
Refresh Interface �
I�
Group talk 0
_u - 11
!> Audio recording @
MIN MfW
CMSV6 SOFTEARE CMSV6 SOFTEARE
6. GPS Maps: The camera location will be shown on the maps. 10. Live Video Streaming
(1) Open the streaming video, by double click the camera from the
7. Reports: Reports will record the events, such as Personnel camera list to open the preview of camera live streaming.
Monitoring, Alarm Information, System Event, Schedule Event, Device
Reporting Information, Media List, My Map. (2) Preview view: By changing ■ l!!Jfi.11 l;I■ •■Jl!!l� ::: � ::::
[i] ■■
to set the preview quantities of camera on each page.
••• ••• ■■■■• •••
�- �- �- �- �- &- --------- (6) [ liJ T J Display mode: Set the video mode: Real Good, Fluent
- <-,-. +
Good.
- Real good mode will take video's real time as priority, so less
,tA· \•-. latency.
- .,.'z I�, ,.
- Fluent Good will take video's fluency as priority, so video will be
fluent.
l:000 0000 N 00 0000 OOOJ'Cf!Vh
__, 000 00
I.
(7) [ 01 T: Capture mode: Capture Image & Front end Capture
-,-
- Capture Image: Take a screenshot from CMSV6 software(must
.....·- open the live video preview).
:,\--../...,,,_J....,;.. r-i•-•-•.-------1... ._;
�.::,Iii - Front end Capture: Take a photo using camera (don't have to open
the live video preview).
•�•\._J---1
t!l ro
CMSV6 SOFTEARE CMSV6 SOFTEARE
(8) [ iJII..,,.: Volume: To enable/disable voice and tuning voice Icon & Functions
volume.
[E8
Icon Functions
(9) Start Video:
® Start or stop tracking playback
- Start Video: Start the video preview of the selected video window; @ Finish tracking playback
- Open All Videos (The current page): Start all the videos on the
current page;
@ Delete the GPS tracking
- Open All Videos (All pages): Start all the videos of all pages; @ Export the GPS tracking to Excel file
- Display Polling Window: Set certain time to display video.
@ Turn the GPS tracking to GPS routes
(10) � Stop Video: To stop video and clear data. I File I The history log of searched GPS trackings
(1) Select camera, define the date & time, then select "Storage Server
11. GPS Tracking
(Video)", click "Search" to start searching. If searching photo, please
User can search GPS tracking and export the data. Firstly select
camera, then input start & end time, click search. select "Storage Server(Photo)".
0-
..
CMSV6 SOFTEARE Q&A
(2) After searching, select "File" to check the recorded files. Question Analysis Answer
Camera Out of battery Charge for 4 hours.
:?OJXll.-1113;19;!4 can't be
/'f, 0 2011)(11.-L�ll:-
powered Mainboard
Protection Use Reset button.
on
Working Camera was
time of not fully Charging time should not be
camera charged less than 4 hours.
is short
(3) Select the file you want to download, double click mouse or right
click mouse, select file download to download the file. The download Data USB port of
status could be checked in "Download" part. Uploading PC Can't Use the USB port of back panel
Interrupted supply enough
frequently power
Camera USB cable
can't be Change USB cable.
issue
recognized
by PC Wrong driver Reinstall driver.
(2) The damage caused by fire, flood, abnormal voltage, other natural
disasters and secondary product damage.
MfM Mi:@
NOTICE FOR USER FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject
(4) The product malfunction caused by Not in accordance with the to the following two conditions: (1) this device may not cause harmful
user manual operation. interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Changes or modifications not expressly approved by the party
(5) The malfunction and damaged caused by the other barriers (man responsible for compliance could void the user’s authority to operate the
made factors or external device). equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
‐ Reorient or relocate the receiving antenna.
‐ Increase the separation between the equipment and receiver.
‐ Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
‐Consult the dealer or an experienced radio/TV technician for help important
announcement