1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

QA QC in Construction

METHOD STATEMENT FOR INSTALLATION OF

DRAINAGE PIPING SYSTEM
April 5, 2022 by QA QC in Construction

Table of Contents

Method Statement for Installation of Drainage Piping System

Method Statement for Installation of Drainage Piping System:
1. Purpose:
2. Scope of Work:
3. References:
4. Material & Tools:
5. Work Procedure – General:
5.1 Transportation and Handling:
5.2 Storage and Inspection:
5.3 Material Inspection:
6. Installation Procedure:
6.1 Site Preparation:
6.2 Pre-installation:
6.3 Installation of Pipes:
6.4 Detailed Permanent Works Installation Instructions:
6.5 Installation of coupling Cast Iron Pipe & Fittings:
6.6 Installation of UPCV Pipe & Fittings:
6.7 Supports Installation:
6.8 Installation of Sleeves:
6.9 Post Installation:
7. Codes and Standards:
OTHER POSTS:
Inspection and Testing Procedure of Drainage Piping after Installation
Method Statement for Installation of Water Pumps
Method Statement for Welding Works | Welding Techniques
Conclusion:

METHOD STATEMENT FOR INSTALLATION OF

DRAINAGE PIPING SYSTEM
https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 1/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

In this article today we will talk about the Installation of Drainage Piping System |
Drainage System in Plumbing | Drainage Pipe Installation Guide | How to Install
Drainage Pipe | Drainage in Plumbing | Drainage Construction Procedure | House
Water Drainage System | Safe Work Method Statement for Plumbing| Installing a
Drainage System in your Yard

METHOD STATEMENT FOR INSTALLATION OF DRAINAGE

PIPING SYSTEM:
1. Purpose:
This method statement defines the task and introduces correct practices in order to ensure
that the job execution will meet the requirements in a safe system at work.

2. Scope Of Work:
The method statement outlines the methodology for the installation and testing for
drainage piping System. “Contractor Name” is Responsible for installation, testing
and final hand over of CP 04 (a & b) Drainage System in Plumbing
DEFINITION & REFRENCE DOCUMENTS:
Programme Minimum H&S Construction Standard Drainage Pipe Installation Guide

3. References:
Drainage Shop Drawings
Technical Specification
Project Quality Plan
Material Submittal Approval & Installation Guide Line.
Programme Minimum H&S Construction Standard Drainage System in Plumbing

4. Material & Tools:

Cast iron pipes & fittings
Unlpasticized polyvinyl chloride (upcv)
Repair Paint for pipes
Support & Hangers
Drilling machine Drainage Construction Procedure
Pipe Cutter (Disc cutter / Hacksaw)
Screw driver
Tool Box
Measuring tape

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 2/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

Sprit Level Drainage Pipe Installation Guide

5. Work Procedure – General:

5.1 TRANSPORTATION AND HANDLING:
Pipes and fittings shall be transported to the site by the contractor, in the appropriate
vehicle such that no damage is done during transportation. The pipes should be evenly
supported throughout their length. Pipes should be handled with care, make sure they are
not dropped on hard surfaces, rolled on the ground or dragged. Where possible, pipes
should be unloaded by hand. If mechanical lifting equipment is to be used, web slings are
preferred as they do no gouge or scratch the surface of the pipe. Drainage Pipe
Installation Guide

5.2 STORAGE AND INSPECTION:

The storage area must be flat, the ground must not be marshy or unstable and it must not
contain any corrosive material. While loose pipe shall be stacked on a clean, flat surface,
free of sharp projections and other sources of point loading. The pipes must be stocked in
the respective stakes according to diameter in accordance with a logical plan. The same is
applied for fittings and accessories. Pipes & fittings should not be exposed to prolonged
solar radiation and covered from direct sunlight. Store all fittings in their original packaging
until required for use, in well ventilated, shady conditions and do not expose to direct
sunlight. Couplings should be stored in cool area protected from light, direct sun light and
strong artificial light with a high ultraviolet content. How to Install Drainage Pipe

The pipes should be stacked as per recommended manufacture instruction to avoid over
stress and possible damage. All the used material should be as per approved material
submittals and approved area of application as indicated in the project documents.

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 3/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

Method Statement for Installation of Drainage Piping System

5.3 MATERIAL INSPECTION:

Upon receipt of materials on site, the Storekeeper and Site Engineer or representative will
have to check to ensure that the materials delivered and their respective quantities are
correct. A Material Inspection Request shall be issued and all materials must be inspected
and verified by the Engineer. When approved, the materials will be considered correct with
respect to their approved sample(s), catalogues and technical reports. How to Install
Drainage Pipe

6. Installation Procedure:
6.1 SITE PREPARATION:
Access and ingress shall be ensured by clearing the area from unnecessary and not
relevant to the task materials. Access and ingress shall be ensured by stacking materials
relevant to the task according to the work schedule. How to Install Drainage Pipe

6.2 PRE-INSTALLATION:
Pipe layout shall be as per the approved shop drawings. The installation shall be planned in
advance to match with the main contractor’s program of works. All materials and tools to be
kept ready on site prior installation works. All material will be visually inspected for damage
before installation and verified that it is undamaged. Project specification, standard codes,
and work procedures shall be followed. Approved supports shall be used to support the
pipes & fittings. Site fabrication shall be allowed for necessary requirement of supports as
per applicable standard if required. How to Install Drainage Pipe

6.3 INSTALLATION OF PIPES:

The position of all pipes and supports shall be marked where possible.
Piping is to be installed as per the approved shop drawings.
https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 4/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

Any deviations to the layout shall be subject to approval of coordination drawings.

Piping shall be installed at appropriate slopes, free of sags and sharp bends, as per
the
approved shop drawings. Drainage in Plumbing
Throughout the installation the open ends of pipes shall be protected from entry of
debris Drainage Construction Procedure
Used the required fittings such as ring seals which are necessary and mandatory to
accommodate the expansion and contraction action as per project Specification and
drawings. Drainage in Plumbing
Rubber Socket with clamps, Flanges, Dielectric Union etc. joint to be used as
required to connect the cast iron and upvc pipes as per project Specification and
drawings.

6.4 DETAILED PERMANENT WORKS INSTALLATION INSTRUCTIONS:

6.4.1 Pipe Cutting:
Pipes shall be cut on site using disc-type cutter or by other cutting tools. The pipe must be
cut square (90 angel). This can be done easily by wrapping a metal sheet around the pipe
with no overlap on the edges, marking around the pipe and cutting along the marked line.

6.5 INSTALLATION OF COUPLING CAST IRON PIPE & FITTINGS:

6.5.1 Assembly as a Sleeve:
Push the supplied assembled coupling onto the pipe spigot so that it abuts on the
central register of the elastomeric gasket. (See Fig, 1)
Push the next pipe spigot into the other end of the coupling. (See Fig. 2).
Tighten the screw to “null gap” position with screwdriver. (See Fig. 3).
The PAM Rapid NG is designed to be tightened to fully closed; there is no need for
checking the torque. Drainage Pipe Installation Guide

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 5/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

6.5.2 Assembly as Separate Assembly:

Push the supplied sealing gasket on to the pipe spigot so it abuts the gasket central
register (see Fig.1). Drainage System in Plumbing
Roll back the open half of the sealing gasket (see Fig.2).
Install the next spigot and unfold the gasket half back (see Fig.3)
Place the steel strap around the sealing gasket (see Fig.4).
For couplings with two screws, alternately tighten the two tightening screws
uniformly and hand tight. The threaded plates must come together parallel to avoid
any deformation. For single screw couplings, tighten the single hexagon head screw
(see
Fig-5) How to Install Drainage Pipe

6.5.3 Installation of Grip Collars:

Position the two half parts of the PAM grip collar uniformly so it encircles the pipe in
parallel. The grip collars must be positioned so that the apertures fit over the fixing
bolts of the coupling and the teeth are directly located onto the pipe.
Insert the four screws to fix the two parts together loosely. The positioning must be
cautiously made, so that the grip collar windows are not seated on the clamps of the
coupling and the claws are not swatting the coupling strap.
Tighten the screws crosswise alternatively so that the two plates are put in parallel
with
the same spacing. Installing a Drainage System in your Yard
The assembly is completed when the external edges of the plates are in contact on
both
sides. Installing a Drainage System in your Yard

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 6/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

Method Statement for Installation of Drainage Piping System

Grip collars shall be installed around the coupling to secure the couplings unspecific
cases like changes of direction, gradient or some components like branches and
plugs, where the junctions exposed to the excessive pressure undergo end thrust
forces that have to be addressed. Installing a Drainage System in your Yard

6.6 INSTALLATION OF UPCV PIPE & FITTINGS:

110mm dia.to 315mm dia shall be installed in upcv pipe work and fittings to SAS14
Class3 Installing a Drainage System in your Yard
90mm dia Pipe work and below shall be installed upcv and fittings to 8AS14 Class 4
Jointing of pipe work and fittings shall be by the use of solvent weld sockets carried
out in accordance with manufacture instructions. Solvent weld cement shall be of a
type approved by the manufacture of pipe work being jointed.
After getting the all civil clearances (including Raft Slabs , levels, blinding, water
proofing & steel fixing), prepare the pipe length & all accessories as per the approved
shop drawing for the laying where applicable. Safe Work Method Statement for
Plumbing
Proceed with pipe Installation with the appropriate Slope and Route as per the
approved
Shop Drawing using suspended supporting system as per the project specification &
leakage test to be applied to insure no leakage from joints & pipes
Measure length of pipe required, making due allowance for any pipe fittings to be
used. Cut the pipe to the measured length. Ensure that the ends are cut square and
clean all burs. A chamfer to the depth of half wall thickness to be applied to each
spigot.

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 7/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

The spigot and socket to be jointed should be carefully examined for any damage
which could impair the jointing procedure.
The spigot insertion depth should be measured as the depth from the mouth to the
shoulder of the socket. Safe Work Method Statement for Plumbing
The insertion depth should be marked on the spigot using marker.
The jointing system for drainage piping system is ”Solvent weld”

The mating areas of the spigot and the socket should be thoroughly cleaned using
the pipe cleaner and a clean rag. Safe Work Method Statement for Plumbing
Using brush apply an even layer solvent cement to the spigot and socket mating
surfaces. House Water Drainage System
The cement should be applied in a lengthwise direction and not with a circular
motion.
The cement should be applied simultaneously to the spigot and socket by two
people.

6.6.1 Solvent Cement Welding:

This method of joining is very simple and reliable if it is followed correctly, but any
deviations from the recommended basic steps may reduce the strength and integrity of the
joint. The procedures for preparation, insertion, and curing should be followed. For further
details please consult National Marketing sales office. House Water Drainage System

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 8/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

6.7 SUPPORTS INSTALLATION:

Pipes shall be supported adequately using approved hangers & supports, at maximum
support spacing of 1.8 m for horizontal pipes & 3.5 m for vertical pipes for all pipe sizes as
per project Speciation. House Water Drainage System

6.7.1 Installation of Stack Support Pipes:

Vertical installation: Either on cantilever arms or stack support consoles

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 9/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

Shall be installed at the base of every Soil, Waste & Vent Stack
Shall be installed where end thrust forces occur as shown in previous detail.

6.7.2 Pipe Hanger Installation:

Location of the hanger to be marked as per approved shop drawings, and Specification:

Install drop-in anchor House Water Drainage System

Install the pipe either by screw fitting or coupling.
Select the hanger based on the pipe size. Install the hanger rod to the drop in anchor.
Install the hanger to pipe and hanger rod. Drainage Construction Procedure
Tighten the bolt and nut holding the hanger rod and hanger evenly.

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 10/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

6.8 INSTALLATION OF SLEEVES:

Where the pipes crossing the fire rated walls, floors or roofs approved fire stopping material
shall be used to fill the annular space between the pipe surface and sleeve. The method of
application shall be as recommended by the approved fire stopping material manufacturer.
The fire sleeve shall have a fire rating compatible to the fire rating of wall, floor or roof being
crossed. Drainage Construction Procedure

6.9 POST INSTALLATION:

On completion of the works, relevant section shall be visually inspected to ensure that the
correct installation procedures have been followed, and that the pipes and fittings are
adequately restrained and supported, as per the Project Specifications. Drainage
Construction Procedure

7. Codes And Standards:

The operation shall be carried out in accordance with the approved shop drawings,
specifications, approved material submittals and specified international standards.

OTHER POSTS:
1. Inspection And Testing Procedure Of Drainage Piping After Installation
2. Method Statement For Installation Of Water Pumps
3. Method Statement For Welding Works | Welding Techniques

CONCLUSION:

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 11/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

Full article on Installation of Drainage Piping System | Drainage System in Plumbing |

Drainage Pipe Installation Guide | How to Install Drainage Pipe | Drainage in Plumbing |
Drainage Construction Procedure | House Water Drainage System | Safe Work Method
Statement for Plumbing| Installing a Drainage System in your Yard. Thank you for the
full reading of this article in “QA QC in Construction” platform in English. If you find this
post helpful, then help others by sharing it on social media. Please share this article on
social media for future uses.

Spread the love

Method Statement for Welding Works | Welding Techniques

Inspection and Testing Procedure of Drainage Piping after Installation

https://qaqcinconstruction.com/

QA QC in Construction
A guide for Quality Assurance and Quality Control Professionals. Quality assurance and quality control in
construction is a guide for quality engineers in the field of civil, electrical, mechanical and HVAC etc. This
is an online institution that teaches how to assure and control the work in construction and the
materials as well.

RELATED POSTS
INSPECTION AND TESTING PROCEDURE OF DRAINAGE PIPING AFTER INSTALLATION
April 5, 2022 | Mechanical Engineering

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 12/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

METHOD STATEMENT FOR WELDING WORKS | WELDING TECHNIQUES

April 5, 2022 | Mechanical Engineering

METHOD STATEMENT FOR INSTALLATION OF WATER PUMPS

April 5, 2022 | Mechanical Engineering

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 13/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

1 Thought On “Method Statement For Installation Of Drainage Piping System”

Mahmoud
October 30, 2022 at 10:38 am

Hi

Reply

Leave A Comment

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 14/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

Name *

Email *

Website

Save my name, email, and website in this browser for the next time I comment.

Post Comment

MOST RECENT
More

BAR BENDING SCHEDULE , CIVIL ENGINEERING , CONSTRUCTION

Main Bars And Distribution Bars In Slab And Their Function

BAR BENDING SCHEDULE , CIVIL ENGINEERING

30+ Bar Bending Schedule Formulas | BBS Steel Calculation

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 15/16
1/25/24, 9:16 AM Method Statement for Installation of Drainage Piping System

A GUIDE FOR QUALITY ASSURANCE AND QUALITY CONTROL

PROFESSIONALS. - QUALITY ASSURANCE AND QUALITY CONTROL IN
CONSTRUCTION IS A GUIDE FOR QUALITY ENGINEERS IN THE FIELD OF
C I V I L , E L E C T R I C A L , M E C H A N I C A L A N D H VAC E T C . T H I S I S A N O N L I N E
I N S T I T U T I O N T H AT T E A C H E S H O W T O A S S U R E A N D C O N T R O L T H E W O R K
I N C O N S T R U C T I O N A N D T H E M AT E R I A L S A S W E L L .

Contact us: [email protected]

© 2024 QA QC in Construction Blog. All Rights Reserved.

P R I VACY P O L I CY TERMS AND CONDITIONS ABOUT US C O N TA C T U S

DISCLAIMER

https://qaqcinconstruction.com/method-statement-for-installation-of-drainage-piping-system/ 16/16