Line Differential Protection / 7SD52/53

Selection and ordering data

Description Order No. Short code

7SD5 combined multi-end line differential protection with distance protection

Device type1)
7SD5 - - -
1
Two-terminal differential relay with 4-line display 2 2
Two-terminal differential relay with grapical display 3 2
Multi-terminal differential relay with 4-line display
Multi-terminal differential relay with graphical display
2 3
see next page
2
3 3

Measurement input
Iph = 1 A2), Ie = 1 A2)
Iph = 1 A2), Ie = high (min. = 0.005 A)
1
2
3
Iph = 5 A2), Ie = 5 A2) 5
Iph = 5 A2), Ie = sensitive (min. = 0.005 A) 6

Auxiliary voltage (Power supply, BI trigger level) 4

24 to 48 V DC, trigger level binary input 19 V4) 2
60 to 125 V DC3), trigger level binary input 19 V4) 4
110 to 250 V DC3), 115 V AC, trigger level binary input 88 V4)
220 to 250 V DC3), 115 V AC, trigger level binary input 176 V4)
5
6
5
Binary/ Signal/ Fast High- Housing Flush- Flush- Surface-
indication command relay5) speed width mounting mounting mounting
inputs outputs incl.
live status
trip
output6)
referred
to 19”
housing/
screw-type
housing/
plug-in
housing/
screw-type 6
contact terminals terminals terminals

8 4 12 – ½ „ A
8
8
4
4
12
12
–
–
½
½ „
„ E
J
7
16 12 12 – „ C
16 12 12 – „ G
16 12 12 – „ L 8
16 4 15 5 „ N
16 4 15 5 „ Q
16 4 15 5 „ S
24 20 12 – „ D 9
24 20 12 – „ H
24 20 12 – „ M
„
24
24
12
12
15
15
5
5 „
P
R 10
24 12 15 5 „ T
24 4 18 10 „ W

Region-specific default / language settings and function versions 11

Region GE, German language (can be changed) A
Region world, English language (can be changed) B
Region US, US-English language (can be changed) C
Region world, French language (can be changed) D 12
Region world, Spanish language (can be changed) E
Region world, Italian language (can be changed) F

13
1) Redundant prot. data interface for Hot-Standby-service is possible 4) The binary input thresholds are selectable in three steps by means
with a two terminal differential relay (second prot. data interface is
needed)
of jumpers.
5) Fast relays are indentified in the terminal diagram. The time
14
2) Rated current 1/5 A can be selected by the means of jumpers. advantage compared to signal/command outputs is approx. 3 ms,
3) Transition between three auxiliary voltage ranges can be selected mainly for protection commands
by means of jumpers. 6) High-speed trip outputs are identified in the in the terminal dia-
gram. The time advantage compared to fast relays is approx. 5 ms 15
Siemens SIP · Edition No. 8 7/47
 Line Differential Protection / 7SD52/53
Selection and ordering data

Description Order No. Short code

1 7SD5 combined multi-end line differential protection with distance protection

System interfaces
7SD52 - - -

No system interface 0
IEC protocol, electrical RS232 1
2 IEC protocol, electrical RS485
IEC protocol, optical 820 nm, ST-plug
2
see next
page
3

Further protocols see supplement L 9 L 0

3 PROFIBUS DP slave, RS485 A

PROFIBUS DP slave, optical 820 nm, double ring, ST connector 1) B
DNP 3.0, RS485 G

4 DNP 3.0, optical 820 nm, ST connector 1)

IEC 61850, 100 Mbit Etherrnet, electrical, double, RJ45 connector (EN100)
H
R
IEC 61850, 100 Mbit Ethernet, with integrated switch, optical, double, LC-connector (EN100) 2) S

DIGSI / Modem interface (on rear of device) and protection interface 1

5 See additional indication M 9 M

DIGSI / Modem interface (on rear of device)

Without DIGSI-interface on rear 0
6 DIGSI 4, electric RS232
DIGSI 4, electric RS485
1
2
DIGSI 4, optical 820 nm, ST plug 3

7 Protection data interface 1

FO5: Optical 820 nm, 2 ST-plugs, line length up to 1.5 km
via multimode FO cable for communication converter or direct FO connection 3) A
FO6: Optical 820 nm, 2 ST-plugs, line length up to 3.5 km
via multimode FO cable for direct FO connection
8 FO17: Optical 1300 nm, LC-Duplex-plugs, line length up to 24 km
B

via monomode FO cable for direct FO connection 4) G

FO18: Optical 1300 nm, LC-Duplex-plugs, line length up to 60 km
via monomode FO cable for direct FO connection 4) 5) H
9 FO19: Optical 1550 nm, LC-Duplex-plugs, line length up to 100 km
via monomode FO cable for direct FO connection 4) 6) J
FO30: Optical 820 nm, 2 ST-plugs, line length up to 1.5 km
via multimode FO cable for communication networks with
IEEE C37.94 interface or direct FO connection 7)
10 S

11

12

13 1) Not possible for surface mounting housing (Order No. pos. 5) For distances less than 25 km a set of optical attenuators
9 = E/G/H/Q/R). For the surface mounted version, please order 7XV5107-0AA00 must be installed to avoid saturation of the
a device with the appropriate electrical RS485 interface and an receiver element
external FO-converter 6) For distances less than 50 km a set of optical attenuators
14 2) Not possible for surface mounting housing (Order No. pos.
9 = E/G/H/Q/R) please order the relay with electrical interface and
7XV5107-0AA00 must be installed to avoid saturation of the
receiver element
use a separate fiber-optic switch. 7) Only available in flush-mounting housing (Order No. pos.
3) Communication converter 7XV5662, see Accessories. 9 ≠ E/G/H/Q/R).

15 4) Device for surface mounting housing (Order No. pos. 9 = E/G/H/Q/R)

will be delivered with external repeater 7XV5461-0Bx00.

7/48 Siemens SIP · Edition No. 8

 Line Differential Protection / 7SD52/53
Selection and ordering data

Description Order No. Short code

7SD5 combined multi-end line differential protection with distance protection

Functions 1 / Protection interface 2

7SD52 - - -
1
Trip mode Auto-reclosure (ANSI 79) Synchro-check (ANSI 25)
3-pole without without
3-pole with without
0 see next
1 page 2
1-/3-pole without without 2
1-/3-pole with without 3
3-pole
3-pole
without
with
with
with
4
5
3
1-/3-pole without with 6
1-/3-pole with with 7

Functions 1 and Protection interface 2 6) 9 N 4

Functions 1
Trip mode Auto-reclosure (ANSI 79) Synchro-check (ANSI 25)
3-pole
3-pole
without
with
without
without
0
1
5
1-/3-pole without without 2
1-/3-pole with without 3
3-pole without with 4 6
3-pole with with 5
1-/3-pole without with 6
1-/3-pole with with 7

Protection interface 2
7
FO5: Optical 820 nm, 2 ST-plugs, line length up to 1.5 km
via multimode FO cable for communication converter or direct FO connection 1) A
FO6: Optical 820 nm, 2 ST-plugs, line length up to 3.5 km
via multimode FO cable for direct FO connection B 8
FO17: Optical 1300 nm, LC-Duplex-plugs, line length up to 24 km
via monomode FO cable for direct FO connection 2) G
FO18: Optical 1300 nm, LC-Duplex-plugs, line length up to 60 km
via monomode FO cable for direct FO connection 2) 3) H 9
FO19: Optical 1550 nm, LC-Duplex-plugs, line length up to 100 km
via monomode FO cable for direct FO connection 2) 4) J
FO30: Optical 820 nm, 2 ST-plugs, line length up to 1.5 km
via multimode FO cable for communication networks with
IEEE C37.94 interface or direct FO connection 5) S
10

11

12

13
1) Communication converter 7XV5662, see Accessories. 4) For distances less than 50 km a set of optical attenuators
2) Device for surface mounting housing (Order No. pos. 9 = E/G/H/Q/R) 7XV5107-0AA00 must be installed to avoid saturation of the
receiver element.
14
will be delivered with external repeater 7XV5461-0Bx00.
3) For distances less than 25 km a set of optical attenuators 5) Only available in flush-mounting housing (Order No. pos. 9 ≠
7XV5107-0AA00 must be installed to avoid saturation of the E/G/H/Q/R).
receiver element. 6) In a two terminal differential relay the protection interface 2 can
be used as redundant protection interface (Hot Standby). 15
Siemens SIP · Edition No. 8 7/49
 Line Differential Protection / 7SD52/53
Selection and ordering data

Description Order No. Short code

1 7SD5 combined multi-end line differential protection with distance protection

Functions
7SD52 - - -

Time overcurrent pro- Ground fault Distance protection Distance protection (Ipick- Ground fault
tection/ Breaker failure protection (Pickup Z<, polygon, upI>,-VI/φ, -Z<), polygon, detection
2 protection (ANSI 50,
50N, 51, 51N, 50BF)
(ANSI 67N) MHO, parallel line
comp.) Power swing
parallel line comp. 2),
power swing det. (ANSI
for isolated/
compensated
detection (ANSI 21, 21, 21N, 68, 68T) networks 1)
21N, 68, 68T)
with without without without without
3 with without without with without
C
D
with without with without without E
with with without without without F

4 with
with
with
with
without
with
with
without
without
without
G
H
with without without without with J
with without without with with K

5 with
with
with
with
without
without
without
with
with
with
L
M

Additional functions 1
6 4 Remote commands/
24 Remote indications
Transformer
expansions
Fault locator Voltage protection,
frequence protection
Restricted ground
fault low impedance
(ANSI 27, 50) (ANSI 87N) 2)
with without 1-side measuring without without J

7 with
with
without
without
1-side measuring
2-side measuring
with
without
without
without
K
L
with without 2-side measuring with without M
with with 1-side measuring without without N
8 with with 1-side measuring with without P
with with 2-side measuring without without Q
with with 2-side measuring with without R
with with 1-side measuring without with S
9 with with 1-side measuring with with T
with with 2-side measuring without with U
with with 2-side measuring with with V

10 Additional functions 2
Measured values, External GPS Capacitive current
extended, synchronization load compensation
11 Min/Max values
without without without 0
without with without 1
with without without 2
12 with
without
with
without
without
with
3
4
without with with 5
with without with 6
13 with with with 7

14

15 1) Only available with Order No. Pos. 7 = 2 or 6

2) Only available with Order No. Pos. 7 = 1 or 5

7/50 Siemens SIP · Edition No. 8