Sample - Project Paper
Sample - Project Paper
Sample - Project Paper
631214-04-5775
EXECUTIVE MASTER IN
ENGINEERING MANAGEMENT
ASIA e UNIVERSITY
2015
LOGISTICS MANAGEMENT, MANUFACTURING STRATEGIES,
MARKETING OPPORTUNITIES AND ENVIROMENTAL
IMPLEMENTATION , PRACTICES GREEN SUPPLY CHAIN
MANAGEMENT IN MALAYSIA FIRMS
631214-04-5775
EXECUTIVE MASTER IN
ENGINEERING MANAGEMENT
ASIA e UNIVERSITY
2015
i
DECLARATION OF ORIGINAL WORK
EXECUTIVE MASTER IN
ENGINEERING MANAGEMENT
ASIA e UNIVERSITY
Hereby declare that this project paper is my own work and all the sources I have
used during the academic session not been submitted to any local or overseas for any
degree or diploma .
ii
LETTER OF SUBMISSION
March 2015
The Programme Coordinator
Executive Master In
Engineering Management
Asia e University.
Dear Sir,
Thank You.
Yours Sincerely ,
______________
I/C : 631214-04-5775
iii
ACKNOWLEDGEMENT
I would like to thankful to the Almighty God for blessing and giving me the
unforeseen inspiration and strength to pull through the “Impossible to Possible”
overcoming all the constrained and hurdles in daily time allocation in working and
family life and encourage with will power in preparing to accomplish this project
paper efficiently and effectively.
In the hard works and to smoothen the research and development , without any
reservation and hesitation here then with my fullest thought would like to express the
deepest appreciation to my advisor Dr.Veera Pandiyan Kaliani Sundram who guide
me in many aspects continuous commitment to me as a student. At times when there
are confusion in an understanding the needs of the thesis topic , he support and
streamline by giving a valuable suggestion to improve the content of reports to ensure
the project paper doesn’t deviate and always focus to the intended scope .
Without forgetting, grateful thank to the Program Co-ordinator SRem for giving an
opportunity to gain knowledge and for the extended support to complete the thesis
and also to the University Malaya by providing the excellent facilities to fulfil my
Executive Master in Engineering Management.
I’m taking this opportunities to dedicate special thank to my parents , family and
lecturers be part of my memories in discussion and sharing the generous help to
support me and giving privilege of times to accomplish this final project paper .
Last but not least , pleasant gratitude to my following colleagues studying together
and giving moral support and encouragement which inspire me to learnt how to build
ourselves to be great persons in life completing project paper at the given time frame.
iv
TABLE OF CONTENTS.
CONTENTS Pages
TITLE PAGE i
ACKNOWLEDGEMENT iv
TABLE OF CONTENTS v
LIST OF TABLES x
LIST OF FIGURES xi
ABSTRACT xii
CHAPTER 1 : INTRODUCTIONS 1
1.1 Introduction 1
v
CHAPTER 2 : LITERATURE REVIEW 11
2.1 Introduction. 11
2.2 Previous Research. 11
2.3 The History of Green Supply Chain Management. 13
2.4 Theoretical Framework. 16
2.5 Logistics Management. 16
2.5.1 Definition of Logistics Management. 16
2.5.2 Reverse Logistics Management. 17
2.5.3 Green Procurement. 18
2.6 Manufacturing Strategies 19
2.6.1 Definition of Manufacturing Strategies . 19
2.6.2 Green Manufacturing. 21
2.6.3 Green Engineering and Re-engineering Design. 22
2.7 Marketing Opportunities. 23
2.7.1 Definition of Marketing Opportunities. 23
2.7.2 Green Marketing. 24
2.7.3 Green Marketing Strategies. 26
2.8 Environmental Implementation 27
2.8.1 Definition of Environmental Implementation. 27
2.8.2 The Green Environmental. 28
2.8.3 Lean Environmental Principle and System. 31
2.9 Green Supply Chain Management. 33
2.9.1 Definition of Green Supply Chain Management 33
2.9.2 Green Supply Chain Management Practices. 34
2.10 Conclusion of Chapter Two 36
vi
CHAPTER 3 : RESEARCH METHODOLOGY 38
3.1 Introduction . 38
vii
CHAPTER 4 : FINDINGS AND ANALYSIS 49
4.1 Introduction. 49
4.9 Findings. 65
5.1 Introduction 67
viii
5.3 Limitation of Study 69
5.5 Recommendations. 72
BIBLIOGRAPHY 76
APPENDIX 80
ix
LIST OF TABLES.
Table 4.8 : Mean and Standard Deviation of item Green Supply Chain
Management 60
x
LIST OF FIGURES.
xi
ABSTRACT
The purpose of this study is to describe the significant of the logistics management ,
manufacturing strategies, marketing opportunities and environmental implementation,
practices and identified the relationship between green supply chain management
in Malaysia firms. Firms, are starting to be aware the importance of green supply
chain management to understand and enhance organizational performance from an
environmental perspective as well as economic and operational .
In this research thesis, the overall findings of the study indicated that all the variables
is measured and impressed. The variables logistics management , manufacturing
strategies, marketing opportunities and environmental implementation, has a
significant relationship towards the green supply chain management and the
importance of ‘Green’ implementation and practices on the firms in Malaysia.
xii
CHAPTER ONE
INTRODUCTION
1.1 Introduction
Most of the manufacturing companies create waste and pollution and its alarming and
threatening the existence of life on earth. As a consequence, these challenges and
pressures push firms need to seriously considering environmental impacts while
doing their business. Companies awareness’ is increasing to consider seriously the
importance of green supply chain management to enhance and supporting friendly
image understanding the perspective of logistics management , manufacturing
strategies, marketing opportunities and environmental implementation, as an
interrelationship aspects of social responsibility. The study therefore, is interested to
know to what extent is the involvement of Malaysian firms in the green supply chain
management.
In this chapter, discussion will be focused on identifying and stating the background
of the study, problem statement, research objective, research questions, justification
of study ,scope of study, significance of study , limitation of study and the conclusion.
In general this topic will able to give an insight of the direction of the research and its
deliverables.
1
1.2 Background of the Study.
Over the past decade, Green Supply Chain Management has indicated as an
important measuring tools in an organizations around the world and the
manufacturing firm’s aiming at integrating environmental concerns in business
strategies. The public become more aware on the environmental issues where the
companies always trying know how to green manufacturing process by recycling the
produced product after use ( Vachon and Klassen , 2007) . To minimize the impact of
firm’s activities on the environment , the green supply chain management has to
improve from beginning of the process to the end of product’s for better life cycle. (
Green et al.2008 ). Thus , this create the firm’s a necessity for organization to look
into reconstruct and restructuring and enhance their strategy to sustain the business
profitability.
As a result , the manufacturing and service organizations must consider the impact of
environmental approach on business performance and the economic viability of the
firm simultaneously on the environmental performance. Success at the supply chain
level leads to success at the organizational level ( Chopra and Meindl, 2004). Since
the suppliers and customers emerge the relationship, the demand on the process ,
product and services will create an environmentally friendly and sustainability
practices throughout the supply chain. Further to that , McKone Sweet ( 2004)
claimed that the companies are under pressure to improve the social and
environmental standards wherever they can exert their influence for instance, at their
suppliers and further along in the supply chain.
GSCP has also begun to gain popularities in emerging economy countries, for
example Eltayeb et al. (2011) studied the outcomes of green supply chain initiatives
among ISO 14001 certified firms in Malaysia , whereas Zailini et al.( 2012) , carried
out a study on GSCM research in Malaysia to analyze the impact and internal and
external forces on environmental performance.
2
Customer are beginning to adjust and willingly to spend money on eco-friendly
products. One of the most important factors in the decision - making of firms the need
for green supply chain management to develop environmental strategies in all
organizations.
In this current globalization challenging businesses and over the years Malaysia has
been growing rapidly measure the green supply chain management as a key Operating
Performance Indicator ( OPI ) and Management Performance Indicator (MPI) on the
firms to boost economic growth. Malaysia Department of Environment, (2008) stated
that manufacturing is the highest contributor towards environmental concerns such as
land, water and air pollution in addition to degrading of natural resources.
3
Greening the inbound logistics or green purchasing will focus on the upstream or
inbound cooperation which involves working on environmental initiatives with the
suppliers and vendors ( Zhu and sarkis,2004: Zhu, Sarkis , and Lai, 2008b:Rao,2008;
Prime Minister Hibiscus Award ( PMHA). The green manufacturing activities include
incorporation of closed loop manufacturing to reduce or minimized emission ( Rao
,2008) and solid liquid waste ( Pagell et al ., 2007).
The 2008 environmental quality report highlighted that scheduled wastes produced by
the manufacturing industry is increasing and according to (Hassan et al.,2006), bulks
of solid waste are transferred to without treatment and within the nearest future
capacity limit of the nation’s disposal sites will be hit. Municipal Council of Penang
Island (MPPP) stated that the amount of solid waste disposed at the dumpsite has
increased by 52 per cent to 768 tonnes per day in 2006 from 505 tonnes per day in
2005.Approximately 30 per cent of all waste that is discarded is recyclable, which
implies that Penang has an opportunity to financially benefit from recyclable
materials valued at RM16.6 million per year, based on current value of recyclable
materials, which is 20 cent per kg
(www.undp.org.my).
As such the firm can use the GSCM practices to reduce their cost and improve their
performances and efficiency in their operations and marketing to remain competitive.
According to (Chau et al., 2010) and the studies mentioned above on adoption of
GSCM have been found as a source of competitive advantage and improved
performance. Therefore the study aimed at determining the various GSCM practices
and their impact on supply chain performance. Green Supply Chain Management
(GSCM) has become a critical factor to sustain.
4
1.4 Research Objective
1.4.5 To determine the relationship between green supply chain management and
organization management in the firms.
In order to achieve the objective and to foresee a determined path to fulfil the
objective, several research questions were derived. This research questions also will
concurrently give an opportunity to know about the structure of research work
covered in this study.
5
The main research questions enlighten in this research are :
1.5.1 How do the logistics management define the importance to green supply
chain management in the context of firm and industry.
1.5.3 How do the marketing opportunities explore business to green supply chain
management in the context of firm and industry.
1.5.5 How do the green supply chain management practices and influence the
performance of an organization in the context of firm and industry.
6
1.7 Scope of Study
The main focus of this study is to ascertain and examine the relationship on the
firms practices the green supply chain management integrated with logistics
management, manufacturing strategies, marketing opportunities and environmental
implementation . Variables of the study were identified and the relationships between
these variables are depicted in a form of theoretical framework. Statistical techniques
are used to test the relationships stated in the framework. Further to that this study is
determining and analysing the contribution performance in the context of firm and
industries, define the importance and the application of logistics management, value
of manufacturing strategies, target and frequency of the marketing opportunities,
reducing consumption of material or energy by environmental implementation and
supplier and customer relationship through green supply chain management.
Although the scope of green supply chain management processes is consider wide as
it encompasses the entire processes, this study emphasising several activities generate
better understanding on an important area focuses on the possible outcomes derived
from green supply chain management practices towards the organization.
The main purpose and significance of this study is to evaluate how the firms in
Malaysia can successfully establish and implement GSCM to the new knowledge by
detailing the activities involved in logistics management, manufacturing strategies,
marketing opportunities and environmental implementation. By this study the
researcher establish the awareness to the organizations the usefulness and benefits
through implementation of GSCM practices. Nowadays , most firms are starting to
realize the greater benefit of the green in their business as concern to environmental
sustainability.
This study moves into a new direction research agenda by integrating the green
concept emerge GSCM arises systematic approach to firm and becoming an
7
important factor for business activities today. As such the firm can use the GSCM to
reduce their cost and improve their performances and efficiency. The proposed model
from this study which has been tested and validated will have significant implications
to identify several capabilities that could adopted and invest more through GSCM in
enhancing a firm’s operational and customer performance.
This study identifies the influence of each type of GSCM practices towards the
organization performance about the value and important of GSCM integrated to the
theoretical framework management perspective. Likewise the study disclose the
concept , significance and outcomes of GSCM practices throughout logistics ,
manufacturing, marketing and environmental , thus it can advance manager’s
understanding and importance of economic enhancement be competitive power of
GSCM in international markets.
The study even encourages Malaysia firm’s to establish appropriate policies and
strategies (Malaysia National Policy on the Environmental , 2002, Section 4.3 and 4.4
) for improving environmental integrated with logistics ,marketing and manufacturing
and emphasis to minimize pollution problems. The organization who adopt a green
philosophy will gain strong support in the community because of their goal to benefit
all society through their commitment to the environment.
By this study , firm are increasingly exploring ways to leverage GSCM systematically
evaluating the role of supplier and organization activities to enhance the flow of
goods from immediate strategies supplier through manufacturing and distribution
chain to the end user. The significance of this study , therefore , emanates from its
expected theoretical contribution to knowledge and practical contributions to open
new horizon in business and public organizations
Although this study has an important contribution to research ,it has some limitation
that should be acknowledged and pointed out.
8
First there are some associated problems with use of self- reported survey data
gathered from a single respondent per firm’s surveyed , thus raises an issue of
possible biases. Even though there is no significant evidence for unpredicted method
bias, it is possible that others types of bias including social perspective bias could
have influence the result of the study. Inherent to perpetual nature of the data may be
inflated by reporting , therefore alternative research design is recommended .As such
alternative research design could provide concrete evidence use of objective data to
analyse GSCM research.
Secondly ,problems arise in manufacturing firms that how to execute the green supply
chain management in special industrial operational institute has limited procedures.
Research to obtain companies performance have limitation on this study causes of
relation and information in the organization which could cause surveyed of spurious
result. For example , it was found that the relation to the firms with ISO 9000
certification and without ISO 14001 certification submitted in a variety of validating
procedures and the simulation of data interrupted on this study. It is noted that
segregation studies have not be implemented the use of such kind of control and less
cooperation among inter firm organization and end to limitation concern in research
design. Standardization procedures is recommended the determine the respondent
ready for any kind of researchers conduct mutual understanding .
Finally , the existing studies suggest several other types of GSCM practices to
investigate organizational theory’s influence on and relationship with environmental ,
logistics, manufacturing and marketing.
9
1.10 Conclusions of Chapter One
On the basic of research , this topic is to discuss an overview of green supply chain
management practices in Malaysia firms and the influence of logistics management ,
manufacturing strategies, marketing opportunities and environmental implementation,
as an interrelationship aspects of social responsibility in-line with this current
increasingly competitive business environment.
According to the finding and further investigation on this topic , firms participant in
environmental and green management initiatives of manufactures such as product
return and recycling policy and incentive schemes to achieve financial objective are
promising and encourage GSCM research to focus more for the country development
to achieve nation objective. Variables of the study were identified in research
problems, objective of the study, research question, scope of study , as well as
potential contribution of the research towards the existing body of knowledge and to
the practitioner.
Yet, the adoption of GSCM has moderate barrier to overcome, the multiple
complexity and uncertainties hurdles seek to undertake GSCM practices to improve
the overall performance and competitive stance. Environmental pressure realized the
firm’s to challenge and examine and ultimately emphasising to corporate with
suppliers and customers in the implementation to emerge as an important GSCM
practices in participate with integrated management operational.
10
CHAPTER TWO
LITERATURE REVIEW
2.1 Introduction
In this chapter contain a summary of the literature review, provides information from
publication on topics related to research of the past empirical studies on the
relationship between each independent variable and dependent variable. It involves
examines and explained the relationship between logistics management ,
manufacturing strategies, marketing opportunities , environmental implementation,
and green supply chain management, implementation and practices on the firms in
Malaysia. Besides the theoretical framework , this chapter also discussed about the
definition and the benefit of adoption of “green” comprehensively the importance and
performance.
Previous numerous studies show that GSCM practices in development nations, such
as Japan, Germany and other northern European countries are very advanced (
Gutowski ,, Murphy, Allen, Bauer, Brass and Wilff, 2005). However , in developing
countries like Malaysia ( the focus of the current study ), GSCM is relatively new
concept both in practice and research ( Rao , 2002).Green supply Chain Management
(GSCM) is an approach to improve performance of the process and products
according to the requirements of the environmental regulations (Hsu & Hu, 2008).
GSCM has emerged in the last few years and covers all phases of product’s life cycle
from design, production and distribution phases to the use of products by the end
users and its disposal at the end of product’s life cycle (Borade & Bansod, 2007).
11
Studies in Logistics Management shows GSCM as the purchasing function including
reduction , recycling, reuse and the substitution of materials ( Narasimhan and Carter
, 1998 ). The GSC covers wide areas of GSCM practices and SCM’s participant and
practices from green purchasing to integrated supply chains flowing from supplier , to
manufacturer, to customer, and to the reverse supply chain ( Zhu and Sarkis,2006:
Rao and Holt, 2005 )
12
process that has become so general ( Testa,Iraldo et al.2009). In Malaysia,
environmental issues have become priority for the government and public
(Eltayeb,Zailani & Filho 2010).The strategy literature stresses that environmental
management can play a critical role as both a social responsibility and an important
cooperate duty ( Arlow abd Gannon, 1982). Hence, pressure from government
agencies and national or international regulators will influence the adoption of
environmentally responsible behaviour ( Delmas and Toffel,2004;
Rivera,2004;Zailani et al,2012). Narasimhan and Carter (1998) found that companies
have institutionalized environmental practices because pressure from external and
internal forces as well as awareness of the consequences of non-compliance with
environmental imperative.
Historically, the study and management of industrial pollution has been a critical
issue for society since the early days of the industrial revolution. Green supply chain
management (GSCM) is an emerging field that strands out of the traditional supply
chain perspective. The “quality revolution in the late 1980’s and the supply chain
revolution in the early 1990’s” have sparked businesses to become environmentally
conscious (Srivastava, 2007, p. 53). GSCM has gained popularity with both
academics and practitioners to aim in reducing waste and preserving the quality of
product-life and the natural resources. Eco-efficiency and remanufacturing processes
are now important assets to achieve best practice (Ashley, 1993; Srivastava, 2007).
Global market demands and governmental pressures are pushing businesses to
become more sustainable (Guide & Srivastava, 1998; Gungor & Gupta, 1999).
Walton, Handfield and Melynyk (1998, p. 2) even claim that “increasing government
regulation and stronger public mandates for environmental accountability have
brought these issues into the executive suites, and onto strategic planning agendas.”
13
Some of the earliest work that can be tied to today’s greening of the supply chain,
occurring before the formation of the U.S. Environmental Protection Agency , can be
traced to Ayres and Kneese ( 1996)
The key themes that came out in the literature over the last twenty years are the
concepts of: green design, green operations, reverse logistics, waste management and
green manufacturing (Guide & Srivastava, 1998; Srivastava, 2007). The very first
green supply chain came into context in 1989. Kelle and Silver’s (1989) article was
the first of this literature that developed an optimal forecasting system for
organisations to use to forecast products that can be potentially be reused. This
forecasting system, however, was highly contentious because returning individual
containers is not usually known with certainty, so therefore, their findings may
somewhat be incoherent.
The first green design literature came into context in 1991. Navin- Chandra’s (1991)
article was the first of the literature to consider the need for a green design to reduce
the impact of product waste. Works of Ashley (1993); Allenby and Richards (1994)
and Zhang, Kuo, Lu and Huang (1997) came into context and expanded the
framework of green design. Life-cycle analysis was an example of a framework that
came out of green design. Works of Arena, Mastellone and Perugini (2003), Beamon
(1999) and De Ron Penev (1995) all discussed life-cycle analysis as a framework.
Green Operations in terms of reverse logistics was an important concept that came
out of the GrSCM literature. Apart from Kelle and Silver’s (1989) article, works of
Pohlen and Farris (1992); Stock (1998) and Tibben and Limbke (2002) all provided
case studies on reverse logistics. The use of plastics and bottle recycling are
mentioned in some of these articles. Carter and Ellram, (1998); Srivastava and
Srivastava, (2005); Shih, (2001); Nagorney and Toyasaki, (2005) and Min, Ko and
Ko, (2006) are all academic perspectives of reverse logistics.
Waste management is another topic that came out of the GrSCM literature. This came
into prominence with the work of Roy and Whelan (1992). This article created a
14
standardised model for reducing electronic waste without harming the environment.
After this article, different waste management issues came into context particularly
around recycling and remanufacturing. Works like Owen (1930), Hannah and
Newman (1995);Sarkis and Cordeiro (2001) and Nagorney and Toyasaki (2005) are
all examples of trends of waste management becoming an issue.
Green Manufacturing, on the other hand, was not conceptualised until 1993 in the
work of Crainic, Gendreau and Dejax (1993). This article established a
comprehensive green supply chain model in terms of transporting containers from
land to sea and vice-versa. Ideas of green manufacturing were then developed further
by Van Der Laan and Salomon (1997); Guide and Srivastava (1998) and White,
Masanet, Rosen and Beckman (2003). There are other comprehensive reviews around
GSCM, particularly in the late 1990’s where issues such as green production and
planning and manufacturing (Bras & McIntosh, 1999; Sarkis & Cordeiro, 2001; Van
der Laan, Salomon & Dekker, 1996) and product recovery (Gungor & Gupta, 1999;
Van Der Laan et al., 1996) are discussed. Barros, Dekker, and Scholten (1998)
discuss recycling in the supply chain and Darnall, Jolley, Jason and Harnfield (2008)
critique GSCM by saying that Environmental Management Systems (EMS) are
making less progress in reducing environmental harms. Some studies, however, are of
limited focus. Van Der Laan et al. (1996) only discussed product remanufacturing and
disposal, and Zhang et al. (1997) only discussed environmental technologies and
design. Journals that are useful to GSCM are Organisations and the Natural
Environment, Business Strategy and Environment and Journal of Operations
Management. Some key authors of the field are Srivastava (2006; 2007), Gupta
(1999) and Guide (1998; 2003). Some of the famous books of GrSCM are from
Allenby and Richard’s (1994) ‘The Greening of Industrial Ecosystem’ and Preuss’s
(2005) ‘The Green Multiplier: A Study of Environmental Protection and the Supply
Chain’ and Sarkis’s (2006) ‘Greening the SupplyChain’.
15
2.4 Theoretical Framework.
LOGISTICS
MANAGEMENT
MANUFACTURING
STRATEGIES GREEN SUPPLY
CHAIN MANAGEMENT
MARKETING
OPPOURTUNITIES
ENVIROMENTAL
IMPLEMENTATION
16
relationship of logistics to supply chain management : developing a common
industry definition” that, The logistics involves planning, implementation and
controlling efficient, effective flow and storage of goods and services from the
beginning point of external origin to the company and from the company to the
point of consumption for the purpose of conforming to customer requirement.
Reverse logistics and green supply chain examine the best way to return
products back to a manufacturer to repair, reuse, recondition and disposal.
Information obtain from returned products will help makers to diagnose
production problem to avoid possible defects. Environment related issues are
also determined. Reverse logistics is the process of retrieving the product from
the end consumer for the purposes of capturing value or proper disposal .
17
Activities include collection, combined inspection, selection, sorting,
reprocessing , direct recovery, redistribution, and disposal.
Green supply chain management includes the use of a reverse logistics system
for the recovery of used materials and products. Recovery networks link a
“disposer market” of used products available for repair, remanufacturing, or
recycling with a “reuse market” which reflects the demand for these products
(Fleischmann, Beullens, Bloemhof-Ruwaard, and Van Wassenhove, 2001:
158). In general, Fleischmann, et al. (2001) find that coordinated design of the
forward and reverse logistics networks is advisable when there is a large
geographical separation between the disposer and reuse markets, significant
differences in their cost structures, and high return volumes. More broadly,
reverse logistics models typically graft the reverse logistics system onto an
existing forward logistics supply chain assuming that the pre-existing supply
chain structure is basically unaltered (e.g. Carter and Ellram, 1998; Krumwiede
and Sheu, 2002; Rogers and Tibben-Lembke, 1998). In this study we examine
how the original forward logistics system is affected and changed due to the
addition of a reverse logistics system.
18
Purchasers can improve the environment performance of product and services by
expressing environment preference through so called “ green procurement “(
Faith-Ell,et al,2006 ). Carter ,et al.(1998) defined environmental purchasing as
consisting of purchasing involvement in activities that include the reduction,
reuse and recycling of materials. The procurement or purchasing decision will
have an impact on the green supply chain through the purchase of material that
are either recycle or reusable, or have already been recycled ( Sarkis 2003).
According to Lee( 2008), buyer is the most important influential stakeholder for
the supplier to participate in green supply chain initiatives. That showed that
green purchasing is one of the key elements for organisations to participate in
green supply chain initiatives. However , Zsidisin and Hendrick (1998)
concluded that purchasing managers are not only driver to promote and influence
the environment supply chain involvement, it is the top management’s
responsibility to prioritize the environmental concern through the entire
organisation which involve procurement, logistics, warehousing practices,
operations, marketing and governmental agencies.
19
The literature points out a few common methods for making the manufacturing
stage “green”: reusing, remanufacturing, and recycling. Recent environmental
management literature has suggested that an informed relationship between
supplier and manufacturer can lead to innovative and cost effective end-products.
A recent study found that Japanese automakers were operating on a productivity
twice as that of their American counterparts. The main difference in productivity
20
2.6.2 Green Manufacturing .
21
2.6.3 Green Engineering and Reengineering Design
Therefore, it is critically important to make the desire for green design and
technology known from the start. Green Engineering embraces the concept that the
decision to protect human health and the environment can have the greatest impact
and cost effectiveness when applied early to the design and development phase of
process or product. Green Engineering focuses how to achieve through science and
technology through scientist and engineers to engage in when designing new
materials, products, processes , and systems that are benign to human health and
the environment.
22
needs of particular customers or markets, with the aim of achieving dramatic
improvement in critical measures, such as cost, quality , service and speed. The
application of green reengineering : technique , such as heat and mass integration,
to more efficiency use energy, water, and materials, thereby reducing resource
demands ; life-cycle approaches to identify opportunities for environmental
improvement and to compare environmental impacts of products; Reducing the
throughput of resources necessary to manufacture, distribute, support and service a
product through a process known as “dematerialization.” Dematerialization (e.g.,
reducing the amount of packaging or using renewable or recycled materials)
reduces the overall energy and material footprint of a product and ; Recovering
value from a product at the end of its useful life: rather than being disposed in
landfills, obsolete products and residual materials can be recovered, recycled, and
reused.
23
2.7.2 Green Marketing .
Green marketing involves a commitment from the firm organization to deal with
environmental friendly product ( i.e.., products that do not harm society and the
environment ) and to conduct marketing activities in a way that reflect the
24
organization’s commitment to environmental responsibility through adherence to
specific controls to ensure the preservation of the natural environment. Adopting
green marketing philosophy brings an organization nearest to its clients,
particularly those who have other environmental concerns besides maintaining
the environment and rationalizing the use of natural resources.
The green marketing approach is likely to explore new horizons and excellent
opportunities for organizations that practices green marketing. This competitive
situation will lead to more profits in addition to promoting leadership in the
market, especially when they introduce environmentally friendly products and
target those who had environment trends in the market. Pride and Ferrell define
green marketing as any developing , pricing and promoting process for a product
which does not cause any damage to the natural environment. That is why green
marketing has been widely adopted by the firms would wide and the following
are the reason for widely adoption of this conception. There are basically five
reasons for which a marketer should go for to adoption of green marketing
:opportunities or competitive advantage, corporate social responsibility,
government pressure , competitive pressure and cost or profit issues.
25
that the green product can be within the reach of the consumers of different
hierarchy. Green marketing is posing some of challenges which require
innovative technology so that the ‘green products’ can fetch wider market at domestic
and international levels. It require a periodic review of the ‘green product’,
so that the products may become ‘ecological viable’ as well as ‘economical
viable’ for the consumers, especially belong to middle and low income groups.
Finally, consumers, industrial buyers and supplier need to pressurize effects on
minimize the negative effect on the environment-friendly. Green marketing
assumes even more importance and relevance in developing countries like
Malaysia.
products and services using green marketing practices.. It has been observed that
the product with poor eco-performance can become target for new substitution,
as a result of this many organization are products from the competitors.
Value positioning of consumer: The organization can design environmental
products to perform as promoting and delivering the customer’s desired value of
environmental products and target relevant customer market segment can be
proved conducive to organization to differentiate.
Designing of bio-degrading prone packaging: It has been observed that
promotion of green products have been strongly influenced by the design making
of the customers. Thus it indicates that bio-degradable packing will affect in a
26
strong and moderate on their decision making. It is therefore, an imperative to the
personnel’s associated with green marketing should modify the product
packaging by making use of recycle as well as hand made paper in packaging
rather than using more mechanized material. The manufacturers, who are using
plastic for packaging should meet some of requisite standard.
Product strategy for green marketing: In order to promote marketing for green
marketing it is an urgent need to identify customer’s environmental necessities
and develop the products accordingly. It includes more environmentally
responsible packages which ensure that products meet or exceed the quality
expectation of the consumers; so that the marketers may charge higher price with
highlighting the eco-logical viability of the products.
Distribution strategy of green marketing: In this strategy of green marketing,
it is very essential to take customer support. In this case, the location must be
differentiated form the competitors. It can be achieved by promoting the in-store
activities like recycling of materials to focusing the environmental and other
related benefits.
Life cycle analysis of green marketing: Product brand is a vital aspects, which
can help to formulate plans for green marketing. It is a best tool for performing
life cycle analysis complex assessment which can make available the vital
statistics on social, environmental and economic impact of products through
the supply chain production process and after the purchase. Life cycle analysis
can inform a brand requirement to go before it claims to be sustainable.
27
These activities potentially capture the added value that can emerge from
collaborative interaction among the members of a supply chain to reduce
environmental impact. As an example of this type of GSCM practices, GEMI
(2004) gave an example of the chemical management services, where a supplier
of chemicals is collaboratively working with customers at their facilities to
reduce their use of chemicals.
The simplest explanation about why the green environmental matters is that, as
humans, the environment-the Earth-is our home. It is where we live, breathe, eat,
raise our children, etc. Our entire life support system is dependent on the well-
being of all of the species living on earth. This is commonly referred to as the
biosphere, a term created by Vladimir Vernadsky, a Russian scientist in the
1920s.The biosphere refers to one global ecological system in which all living
things are interdependent. For example, implementing environmentally sustainable
practices and green supply chain management has the potential to eliminate waste
and generate cost savings, leading to a stronger bottom line. In addition, with many
consumers committed to “going green,” eco-friendly businesses often benefit from
favorable public opinion and greater customer loyalty. Environmental issues
become a major concern for business as well as public organizations. Therefore,
28
efficient policies need to be designed to alleviate these issues and approach ISO
14001 certification is encouraged to implement in firm’s and organizations.
29
operations, such as sourcing, manufacturing, and logistics, are believed to be
responsible for most of these problems (Beamon, 1999). These challenges and
pressures push firms to seriously considering environmental impacts while doing
their business. Green becomes a common practice to portray the environmentally-
friendly image of products, processes, systems and technologies, and the way
business is conducted (Vachon & Klassen, 2006).
The representative from SIRIM described the drivers for green supply chain
importance in environmental and initiatives in Malaysia as: In Malaysia, green
activities are for business reasons because most companies are multinational
companies and most of them are Japanese, American or European based
companies. These companies try to ensure that whatever products they export to
Europe or to US will be accepted. Especially Japanese companies are very
concerned of US or European legislations and try to comply with these
legislations. So, Malaysian companies do green supply activities so as not to loose
their business in Europe or probably in Japan. Most Malaysian companies have
green purchasing committee dealing directly with customer and look to what is the
customer requirement, and most customers come with specific requirement under
green procurement list; non-hazardous metal, recycled content, energy efficiency,
use of renewable resources or any other criteria that spelled out in green
procurement list. Also, the government promotes green activities concerning the
important of green environmental and gives financial incentives to the
manufacturers to embark on green activities. The government, represented by
department of environment, promotes a national environmental policy which
contains “green consumerism.”
Modern day businesses all aim to produce goods at a low cost while maintaining
quality, staying competitive in the global marketplace, and meeting consumer
preferences for more green environmentally friendly products. Going green
provides bottom line cost savings, as well as a competitive advantage in the
30
marketplace. It allows firm to act proactively to address new environmental
requirements from vendors and suppliers, while getting ahead of upcoming
legislation. A solid environmental program also attracts the highest quality
employees in firm and keeps those have happy and healthy. Green firm’s operate
their businesses to meet their needs, without compromising the ability of future
generations. Green et al.,(1996), studied the types of environmental, green supply
chain relations and doing impact on the environmental practices of companies and
suppliers. They found that , compared with suppliers, the customers play a larger
role in environmental impact. However, Theyel (2001) point out that those
companies that want to create added benefit need to ensure equal the involvement
for customers and suppliers. Jointly developing product with supplier can ensure
more economic benefits ( Theyel,2001 ).
31
in implementing the Lean and green initiatives. The procedures and measures for
attaining the goals must be clearly communicated to the employees at all levels.
There must be cross functional cooperation in the organisation to learn and
benefit from mutual experience. There should be a process of acknowledging the
best practices of each unit and introducing the same at the company level. A firm
can benefit tremendously from combining the Lean and green efforts. The firm
will be seen as contributing to protecting the environment and preserving it for
future generations. It will result in reduced cost of operations, optimum
utilization of resources, reduction in wastage and better profitability for the
organisation. A key component of Lean principles is just-in-time (JIT) inventory
strategy. It can be seen that Lean principles and ISO 14001 standards have a lot
of common ground and both aim at reducing waste. Lean focuses on delivering
the maximum value to the customer using the required resources at minimizing
waste. When an organisation implements Lean, there are significant cost savings.
There is optimum utilization of resources and wastage is reduced. This has a
positive impact on the environmental performance of the firm.
32
organization and will have a positive impact on the overall performance. Lean
should be adopted as a way of thinking and as a way of doing business in order to
fully enjoy its benefits (Sarkar, 2007). According to Reidenbach & Goeke (2006,
pp. 1), “Rather than having cost reduction as the exclusive focus of lean thinking,
the conceptual framework of lean also has tremendous potential for increasing
top-line revenue by creating a sustainable differential value advantage for the
enterprise that deploys the concept in its entirety.”
Green supply chain origins from the idea of supply chain management and
sustainable development theory. The green supply chain management is a system
which includes the process of material acquisition, processing, packaging,
warehousing, transportation, sale and use to the end of life treatment, recycling
33
(Bacallan, J.J. 2000). The process is guided by the principle of optimization
allocation of resources, enhancing benefits, achieving the goal of the
compatibility with the environment. It is a green system combines by the
suppliers, manufacturers, distributors, retailers, consumers, environment, rules
and cultural element. So it is necessary to establish green supply chain
management, so that the enterprise can have sustainable development (Murphy,
P.R. et al, 2003).
Green supply chain management mainly began from product design, and end in
final product recycle. It mainly includes the following 5 aspects (Sarkis, J. 1998).
We call them green procurement, green design, green manufacturing, green
distribution, green logistics, green consumption and green recycling. The
objective of green supply chain is to eliminate or minimize negative
environmental impacts (air, water, and land pollution) and waste of resources
(energy, materials, products) from the extraction or acquisition of raw materials
up to final use and disposal of products (Hervani, Helms & Sarkis, 2005).
across the entire supply chain. According to Vachon and Klasses (2006), the
green supply chain management practice has been lacking a comprehensive
framework until more recently the internalization or externalization framework
from the international management literature has proposed a theoretical
foundation to categorize environmental management in the supply chain. The
34
framework, which was also used recently to characterize supplier development
activities and corporate social responsibility suggests that organizations can
either conduct activities through markets (externalizing) or by incorporating
those activities within the organization hierarchy (internalizing) (Husted, 2003).
Hence, an organization’s green supply chain practices imply internalizing by
integrating its environmental management activities with other organizations in
the supply chain or externalizing environmental management in the supply chain
by employing market-based mechanisms.
The green supply chain management concept (and its many elements) has had
many variations over the years and has included sustainable supply network
management; supply and demand sustainability or corporate social responsibility
networks; supply chain environmental management; green purchasing and
procurement, environmental purchasing, green logistics and environmental
logistics (Linton et al., 2007). Using a similar premise, Vachon and Klassen (2006)
put forward the concept of green supply chain management practices which
comprise two sets of related yet independent environmental activities, namely:
35
environmental collaboration and environmental monitoring several activities, such
as managing reverse flows of materials and packaging, sharing environmental
management techniques and knowledge among supply chain partners, controlling
environmental risk associated with suppliers’ operations, and assuring proper
product utilization by customers (Snir, 2001).
According to Zelbst et al., (2010), business processes that must be integrated and
coordinated include in pursuit of green supply chain practices will include
purchasing, manufacturing, marketing, logistics, and information systems. Further,
strategic imperatives that must be aligned include customer focus, efficiency,
quality, and responsiveness and most recently environmental sustainability. With
competition at the supply chain level and a focus on the changing demands of final
customers, it is necessary to identify and adopt practices that yield competitive
advantage at the supply chain level which, in turn, yield improved performance for
the individual supply chain partners (Green et al., 2008).
The environmental problem in our world have becoming major social and economic
problems , building the green supply chain systems is demand of the use development
of human society and it is a great social and firms benefits. In this chapter summary
of the literature review, examine and explained the relationship between each
independent variable; logistics management , manufacturing strategies, marketing
opportunities , environmental implementation and dependent variable; green supply
chain management , practices on the firms in Malaysia .
Indeed, research supports the idea that proactive green supply chain management may
represent an “inimitable competitive weapon” in the business environment, one that
can deliver value for the firm. Firms commit significant resources to environmental
initiatives, and some research suggests that environmental practices in green supply
chain management shape firm performance. When firms use such practices, they can
36
potentially improve performance via processes that involve controlling wastes,
improving their reputation, and lowering overall costs
In the scope of businesses have created and adoption Green Supply Chain
Management that are in better alignment with the best interests of Logistics
Management as the purchasing function including reduction , recycling, reuse and the
substitution of materials ; Manufacturing Strategies ,in greening the production
phase, manufacturing firms should also go for green design or design for
environment; Marketing Opportunities go "greening" can lower the ecological
impacts of business and also increases efficiency, creates the potential source of
competitive advantages in an innovative manner ;and Environmental Implementation,
a growing number of companies are putting into practices the environmental
management system selecting process influence the adoption of environmentally
responsible behaviour.
Likewise from this study, reveal that green supply chain management are now
gaining momentum in Malaysia firm starting to implement green practices and it is
pursuing to continue since there are demands and several push and pull factors that
motivate firms to do so. Finally anticipating awareness in future research , the
increase of industrialization and globalization in developing countries create more
opportunities for firm’s going green in their businesses as concern to environmental
sustainability.
37
CHAPTER THREE
RESEARCH METHODOLOGY
3.1 Introduction.
38
among scientific methods as it is possible to check the validity of survey data, using
various statistical methods ( Kerlinger and Lee 2000).
LOGISTICS
MANAGEMENT
MANUFACTURING
STRATEGIES GREEN SUPPLY
CHAIN MANAGEMENT
MARKETING
OPPOURTUNITIES
ENVIROMENTAL
IMPLEMENTATION
The conceptual framework contains the key factors , the variables and presumed
relationships among them ( Miles and Huberman,1994) . The main aim of this
research is to understand the independent variable and dependent variable
relationship of the firm’s organizational implementation and performance. The
formulations of the theoretical propositions illustrated on this theoretical framework
consist of four Independent Variables (IV) and Dependent Variable (DV). The
Independent variable (IV) is logistic management, manufacturing strategies,
marketing opportunities , environmental implementation and Dependent variable
(DV) green supply chain management. Theoretical framework visually elaborate wise
perspective on research of the study, identifies literature review categories and directs
research objective.
39
3.4 Research Hypothesis.
Hypothesis 1 :
The Logistics Management has positive relationship with Green Supply Chain
Management .
Hypothesis 2 :
The Manufacturing Strategies has positive relationship with Green Supply Chain
Management .
40
minimizing life-cycle environmental impact (Zhu et al., 2008b). The design stage of a
product is most critical since this is the stage when materials and processes are
determined thus, shaping the impact on the natural environment. Hence, designing the
product concurrently with the supply chain is a GSCM best practice (LMI, 2005). In
the process of green production, the input and output of the manufacturing process,
enhance the humanity in manufacture, by adjusting working hours and reducing
labour intensity and other measures to enhance the work of staff enthusiasm and
creativity to increase productivity via GSCM.
Hypothesis 3 :
The Marketing Opportunities has positive relationship with Green Supply Chain
Management .
Marketing Opportunities ,has "greening" can lower the ecological impacts of business
and also increases efficiency, creates the potential source of competitive advantages
in an innovative manner (Samson ; 2008). It is generally accepted that a company's
contribution to environmentally design technology development is dependent on an
integration of environmental requirements into industrial products and processes
(Porter & Linde, 1995). GSCM as a strategy to gain competitive advantage means the
orienting empirical study shows that there is a substantial interest amongst the firm’s
to take action to decrease their environmental impact. GSCM ensure marketing is the
ecological management of sales of enterprise, which includes distribution channels
increase sales promotion with the goal of adding value to the business and reducing
costs in all parts of the production system is identified as key drivers in order to
increase market competitiveness.
Hypothesis 4 :
The Environmental Implementation has positive relationship with Green Supply
Chain Management .
41
have become priority for the government and public (Eltayeb,Zailani & Filho
2010).The strategy literature stresses that environmental management can play a
critical role as both a social responsibility and an important cooperate duty ( Arlow
abd Gannon, 1982). Hence, pressure from government agencies and national or
international regulators will influence the adoption of environmentally responsible
behaviour ( Delmas and Toffel,2004; Rivera,2004;Zailani et al,2012). Narasimhan
and Carter (1998) found that companies have institutionalized environmental
practices because pressure from external and internal forces as well as awareness of
the consequences of non-compliance with environmental imperative Design for
environment (DfE) is a concept which reduces the impact to damage the environment
of products or services across its life cycle. According to Lewis and Gretsakis (2001),
the environmental impact of any product or material is “locked” into the product
during the initial design stage when materials, processes are selected. Therefore
GSCM in design stage is very important to determine if a product life cycle creates
impact to the environment.
Hypothesis 5 :
The Green Supply Chain Management practices a significant relationship to firm’s
enhancing environmental friendly awareness.
One study from Malaysia that has been carried out by Eltayeb and Zailani [33] has
identified the four key drivers or motivators to green supply chain initiatives:
Regulations, customer requirements, expected business gains, and social
responsibility. Eltayeb et al. [34] analyzed the relationship between green supply
chain initiatives and performance outcomes and identified the key initiatives (eco-
design) that have positive effect .As such the firm can use the GSCM practices to
reduce their cost and improve their performances and efficiency in their operations
and marketing to remain competitive. According to (Chau et al., 2010) and the
studies mentioned above on adoption of GSCM have been found as a source of
competitive advantage and improved performance. Therefore the study aimed at
determining the various GSCM practices and their impact on supply chain
performance. Green Supply Chain Management (GSCM) has become a critical factor
to sustain. GSCP has also begun to gain popularities in emerging economy countries,
42
for example Eltayeb et al. (2011) studied the outcomes of green supply chain
initiatives among ISO 14001 certified firms in Malaysia , whereas Zailini et al.(
2012) , carried out a study on GSCM research in Malaysia to analyse the impact and
internal and external forces on environmental performance.
responsibility. Eltayeb et al. [34] analysed the relationship between green supply
chain initiatives and performance outcomes and identified the key initiatives (eco-
design) that have positive effect .
The credibility of findings and conclusions extensively depend on the quality of the
research design, data collection, sampling technique, data management, and data
analysis. This chapter will be dedicated to the description of the methods and
procedures done in order to obtain the data, how they will be analysed, interpreted,
and how the conclusion will be met. This section is to justify the means in which the
study was obtained and will help in giving it purpose and strength as it will then be
truthful and analytical. All these will help in the processing of the data and the
formulation of conclusions.
Specifically, this research will cover the following: the research design and method,
the respondents or subjects to be studied (which will include the sampling method),
43
the data collection instrument, and the data analysis. Questionnaire are useful tool for
investing and trends in data and frequently used with success management ,
marketing and consumer research ( Easterby-Smith,1991).
The survey questionnaire were distributed to the firm’s in Malaysia randomly which
consist of 135 questionnaire via email and manually to respondent. Not all the
questionnaire distributed to respondents returned with full participation, some of them
refused to joint reason being they didn’t show their interest and limited time allocated
for this survey. Out of 135 distributed questionnaire 125 respondents have
completed and return the questionnaire . The questionnaire survey form started
with an introduction page that defined the objective of the questionnaire. The
objective of the questionnaire was to gather the information from the potential
respondents for their users and preference on the development of GSCM. Before the
respondents actually taking part in the questionnaire survey, there was a brief
introductory section for them to understand the background and purpose of this
particular questionnaire and make the participants aware of the information will be
kept confidential and would not be used for any profitable activities or against them.
The questionnaire designed that has been used for this research is divided into six
section, which consists of 36 questions.
44
constructed used closed–ended scale. Section B to Section F questions were
constructed in the form of Likert –scale.
Data is mainly used to support the total research , so the collection of data is the main
part of our paper ( Lee, H ,et al,. 1997b). In this research , mainly use primary data
and secondary data. The questionnaire consists of closed ended questions designed to
elicit specific response for qualitative analysis. A likert scale was used for close –
ended questions. A questionnaire was chosen since it act as useful tool for collecting
data from respondents because of the need to provide a means of expressing their
views more openly and clearly.
Primary data also know as raw data, is mainly obtained through the interview
and survey ( Grene,V,1976 ). Primary data usually can answer question that
secondary data can’t answer, and primary data are usually more time an
credible. In this research, primary data was collected and the data was
standardized to make comparison on the survey forms which were sent to the
firm’s managers and executives using mail and manual method in this study.
By the facility of geography location, we get the primary data information
which supported the research in this thesis.
45
3.7.2 Secondary Data.
The sampling technique used in this study is probability sampling, which is simple
random sampling technique. Probability sampling as defined by ( Rust et al, 2010),
managing the customer experience is typically viewed as the responsibility of the
firms in most organizations .Each element in the firms do have equal probability or
chance to be selected as sample subject. Meanwhile given the nature of distribution
heavily skewed towards much smaller firms, it was necessary to adopt a sampling
approach where larger firms would be represented to a greater extend in the final
samples. As such these larger firms were the primary focus of the study and as a
result managers were randomly selected to be included in the sample from the pool of
firms. Simple random sampling technique is referred as to the collection of
information from the pool of firms of the employees or managers who are randomly
selected from the pool of larger firms or population frame.
46
distribution, the researcher used the probability sampling called simple random
sampling techniques in order to select the respondent. It would be possible to
generalize the properties or the characteristic to the population elements.
According to Uma Sekaran (2003), population refer to the entire group of people,
events, or things of interest that researcher wishes to investigate. The population
for this study refers to the customer in firms industries. Sampling size refers to a
number of units of respondents to be included in a study and determined based on
the size of the population. For the purpose of this research the sample
chosen comprises of randomly selected individuals from the selected population
and the information is then tabulated.
In order to have significant and reliable information that appropriate with the
fieldwork study, certain proper scaling technique must be adopted. Therefore,
questionnaires should include of the following scaling :Close-Ended Question –
Likert Scale. The respondents are required to choose Strongly Disagree (1), Disagree
(2), Satisfy (3), Agree (4) and Strongly Agree (5)
The process of analyzes a data and finding analysis begins after all the data and
information had been gathered through the data collection method. Through this
process, the researcher determined the influence between the variable through
inferential analysis in order to test all the research questions. Later the results of the
hypotheses testing are interpretation. Statistical Package for Social Science ( SPSS )
software is used to process and analyze more accurate and quick result with graphical
explanation. Concept analysis is the process of analysing verbal or written
communications in a systematic way to measure variables quantitatively (Polit &
Hungler 1995:209, 698).
47
3.10.1 Frequency Distribution
This chapter looked at the research methodologies explain the procedure and data
collection method that had been used to gather and analyze the most important factor
that focus the relationship of logistics management, manufacturing strategies,
marketing opportunities, environmental implementation with green supply chain
management in the Malaysia firms. The primary reason for the study was to learn
through administration of questionnaire on the relationship on the variable.
Interviews and questionnaires were the main methods of data collection used to
gather relevant data to achieve the research objectives.
This chapter also highlighted the methodologies conducted in this study. It also
explained the research design, data collection method which consisted of primary and
secondary data, sampling design, constructs measurement, data processing
description and the techniques used in data analysis. The following chapter will
illustrate the results by presenting them in tables form for better understanding.
48
CHAPTER FOUR
4.1 Introduction
The data for this study was obtained through a questionnaire to respondents among
the 135 firm in Malaysia. The questionnaire covers wide scope of the research
objectives of this study. However, in this analysis and findings, the most critical and
important issues will be identified and selected that need to be tackled or resolved as
further elaborate in conclusions and recommendations in chapter 5.
49
4.3 Profile of Respondents.
TABLE 4.1
Demographic Profile
Categories Frequency Percentage (%)
50
In the table 4.1 demographic profile , respondents were categorized according to eight
different demographic characteristic : gender, age, working experience, annual
turnover, type of industrial, number of employee, monthly income and education.
It’s illustrated that generally the respondent in this study were mainly male ( 65.5
percent ; 79 ) , whilst females made up of only (34.2 percent ;41) of the sample
group. This shows the male respondents are more satisfied and female respondents
is just fairly satisfied.
Apart from that , the majority age respondents are between 36 to 50 years old ( 61 ;
50.8 percent ) is comfortable and satisfied of the firm performance. The most of the
respondents between 26 to 35 years old ( 38 ; 31.7 percent ) are willing to support
towards the majority satisfactions level . Respondents above 50 years old (17 ; 14.2
percent) is average satisfied .The respondent below than 25 years old ( 4 ; 3.3 percent
) is less interest .
It has also shown in the aspect of the annual turnover between Rm 500,000 to
5,000,000 ( 45.8percent ; 55 ) is the highest sales satisfaction achievement , annual
turnover between Rm 100,000 to 500,000 ( 20.8percent ; 25) is satisfactory, annual
turnover above than 5,000,000 (18.3percent ;22) is almost to get closer to satisfactory
51
and annual turnover below than Rm100,000 (15.0percent;18) is just agree to focus
the firms business .
With the respect of the monthly income , the respondents having income more than
5001( 40.8 percent ; 49 ) is above satisfied , the respondents income between 3001 to
5000 ( 35.5 percent ; 42 ) are satisfied , the respondents income between 1001 to
3000 ( 23.3 percent ; 28 ) respectively satisfactory and respondents income below
than 1000 is considered below satisfactory ( 0.8 percent ; 1 ).
Among the respondent , firms having education level of graduate in diploma( 50.8
percent ; 61 ) are more satisfied, the level of graduate in degree ( 32.5 percent ; 39 )
are satisfactory and level of graduate in master/Phd (9.2percent ; 11) and level of
undergraduate SPM ( 7.5 percent ; 9) has responded fairly below average.
52
4.4 Normality Test.
TABLE 4.2
A normality test was conducted to identified the distribution of the data. The various
Gamst and Gualino (2006) suggested using the statistical of Skewness and Kurtosis as
Table 4.2 shows that three variable figures in kurtosis value statistic , manufacturing
strategies, environmental implementation and green supply chain management in
between the range of ( -1.5 to + 1.5 ) is good normality test . There are two statement
value indicate beyond the limit range, logistics management in kurtosis value statistic
is 3.817 and has high probability for extreme value, marketing opportunities in
kurtosis value statistic is 1.768 which slightly higher than limit range and to observe
the probability value. This data despite the two beyond limit range , overall
distribution and respondent is suggested good result as well.
53
4.5 Reliability Analysis.
TABLE 4.3
Reliability Analysis
The reliability analysis for each measure was examined by computing its Cronbach
Alpha. The reliability of measure indicated the stability and consistency of the
instruments in measuring concept and helps to assess the goodness of measure (
Sekaran,2000 ) . Sekaran (2000 ) also suggested that the minimum acceptable
reliability is 0.60.To test the internal consistency of the measurement instrument, the
reliability analysis was conducted on the factors. For the purpose of this study, a
minimum acceptability of 0.6 ( threshold value ) was set.
Cronbach’s α ≥ 0.9 0.7 ≤ α < 0.9 0.6 ≤ α < 0.7 0.5 ≤ α < 0.6 α < 0.5
alpha
Internal Excellent(High- Good (Low- Acceptable Poor Unacceptable
consistency Stakes testing) Stakes testing)
54
Result are shown in Table 4.3 , that it can be observed each of the reliability . For all
the variables, logistics management the cronbach alpha is 0.712, marketing
strategies the cronbach alpha is 0.676, environmental implementation the cronbach
alpha 0.726 and green supply chain management the cronbach alpha is 0.631
suggesting that the four items have relatively good internal consistency or reliability.
Marketing opportunities the cronbach alpha is 0.552 are poor and unacceptable
reliability .
According to Coakes and Steed (2007), descriptive statistics are used to describe,
examine and summarize the main features of a collected data quantitatively.
Therefore, descriptive statistics are describing what the data shows. Basically, this is
the methods used to organize, display, describe and explain a set of data with use of
tables, graph and summary measures (Norusis, 1999, Johnson and Christense, 2000).
Respondents were asked to indicate their perceptions and agreement towards the
statement in the questionnaires, using the Seven Point Likert-Scale answers. The
scale were ranged' between 1 = strong disagree; to 5 = strongly agree. Based on their
score for each statement, researched had found the average score (mean) for each
variables. This value was then categorized to the following categories to indicate their
level of perceptions towards all variables.
55
4.6.1 Mean and Standard Deviation of Logistics Management
TABLE 4.4
Table 4.4 shows Mean and Standard Deviation scores for Independent Variable of
Logistics Management . As tabulated, all the items have means from 3.58 to 3.99 and
standard deviation more than 0.6 indicates that the positive logistics management
among respondents towards the green supply chain management . The highest ( std =
0.75796 and std = 0.72857 ) , employee’s of the firm shows a respect and fulfils it’s
obligations reduce logistics cost between supplier and customer . The second highest
( std = 0.68961, std = 0.68349, std= 0.67979 and std=0.51003 ) where the firm
promise to be reliable and satisfy optimize logistics flow by environmental audit to
less pollution and to bring economically beneficial results. Despite that the firm (
mean = 3.8917 ) very concerned on environmental audit of supplier internal
management and ( mean = 3.9917 ) the customer more confident that logistics
management practices purchase eco green material where the product is less
pollution.
56
4.6.2 Mean and Standard Deviation of Manufacturing Strategies
TABLE 4.5
15. design and produce product to meet required performance 3.8033 0.49017
with international standard.
16. production recycling and disposal reduce manufacturing 3.8033 0.71356
cost in use of clean technologies.
17. design of product for reduce consumption of material or 3.6250 0.75662
energy.
18. technique of JIT, kaizen, 5’S’ and etcetera to improve 3.7833 0.77982
manufacturing and operational.
19. a system for organizing and managing product development 3.9083 0.69809
, operational and customer relation.
20. scheduling and planning to meet outputs on time. 4.1417 0.68961
Table 4.5 shows Mean and Standard Deviation for Independent Variable of
Manufacturing Strategies . The result shows mean average 3.844. The manufacturing
strategies is highest and critical factor in building green supply chain management (
std = 0.77982 and std = 0.75662) and the firm generally emphasize technique JIT /
Kaizen / 5’S’ to improve manufacturing and operational by design product to reduce
consumption of material and energy. The firm act accordingly that the scheduling and
planning meet outputs on time ( mean = 4.1417 ) and also ensure customer relation
are maintain with proper organization system managing product development ( std =
0.69809 ) . The mean and standard deviation manufacturing strategies is more for
keeping and practices the green supply chain management in the firms operational.
performance.
57
4.6.3 Mean and Standard Deviation of Marketing Opportunities.
TABLE 4.6
23. the philosophy that absolutely focuses on customer value. 3.8083 0.65203
Table 4.6 shows Mean and Standard Deviation for Independent Variable of
Marketing Opportunities . The firm effectively ( mean = 4.1250 ) establish a
competitive advantages product and expand to new market and the information
shared and exchange between customer and firm for future customer expectation (
mean = 4.0417 ). The innovation or improvement process ( std = 0.70592 ) by the
firm should initiate product benefit of the green supply chain and mutual
commitment objective between firms and customers are achieved via green
procurement policy ( std = 0.66083). The mean and standard deviation is generally
promising on what the firm is doing about understanding the philosophy increasing
the business through marketing opportunity and it does to forestall potential ones with
reinforced customer value .
58
4.6.4 Mean and Standard Deviation of Environmental Implementation.
TABLE 4.7
32. reduce waste cost for processing , reuse and recycling. 4.2417 0.80956
Table 4.7 shows Mean and Standard Deviation for Independent Variable of
Environmental Implementation. The firm highly ( std= 0.86319 ) and effectively go
for ‘ISO 14001’ certification, thus reduce waste cost of processing by reuse and
recycling ( std=0.80956) as goes to ( mean=4.2417) and in the aspect of safety (
std=0.69310) reduce use of hazardous product in manufacturing process
(mean=4.0833). The firm need to encourage (std=0.68553 ) procedure to ensure safe
disposal of any waste in an environmental consider within the organization and mid-
level to senior management to commit to green supply chain management
(std=0.70769). The average (mean=3.86) seems influence adoption of environmental
implementation and support the relationship with green supply chain management
reduce waste and create awareness to firm management of reuse and recycling
processing.
59
4.6.5 Mean and Standard Deviation of Green Supply Chain Management
TABLE 4.8
Mean and Std. Dev. of items for Green Supply Chain Management
33. the environmental reduce waste and energy, decrease 4.0667 0.71870
hazardous material and improve consumption.
34. considering logistics of decrease costs material, energy 4.0583 0.67731
and waste.
35. manufacturing of operational increased the productivity 3.9250 0.73522
and efficiency on delivered goods on time.
36. the market opportunities and share increase focusing 4.2417 0.67358
designing and innovation satisfy customer.
Table 4.8 shows Mean and Standard Deviation for Dependent Variable of Green
Supply Chain Management. The average mean score for green supply chain
management is 4.073. This shows the customer believe the firm can ( mean=4.2417
) increase the market opportunities and share focusing designing and innovation
satisfy customer. Despite that ( mean=4.0667) concurrently suggest the
environmental reduce waste and energy enhance decrease hazardous material and
improve consumption and (mean=4.0583) considering logistics of decrease costs as
well as energy and waste. Ultimately customers relationship ( std = 0.73522 )
towards the firm in factors of manufacturing the operational increased the
productivity and efficiency on delivered goods on time. The mean and standard
deviation is excellently participate in improving the firm sustainable strategies
mediate relationships green supply chain management and firm operational
performance.
60
4.6.6 Means and Standard Deviation of Study Variable
TABLE 4.9
Descriptive Statistics
Descriptive Statistics
Mean - This is the arithmetic mean across the observations. It is the most widely
used measure of central tendency. It is commonly called the average. The mean is
sensitive to extremely large or small values.
Std. - Standard deviation is the square root of the variance. It measures the spread of
a set of observations. The larger the standard deviation is, the more spread out the
observations are . ( threshold relation p > 0.7 and some survey indicate p > 0.6 : is acceptable and good )
Table 4.9 descriptive statistics, describe based on the overall mean for green supply
chain management was 4.0729 ( std = 0.48333), logistics management was 3.7666 (
std = 0.43500 ), manufacturing strategies 3.8456 ( std = 0.42860 ), marketing
opportunities 3.9230( std = 0.34819 ), environmental implementation 3.8609 ( std =
0.48309 ). Based on the result, it can be summarized that all of respondents answers
falls at the point mean 3 to 4 which is they
61
agree for each statement and the standard deviation of logistics management,
manufacturing strategies, marketing opportunities ,environmental implementation and
green supply chain management is below than 0.7 or 0.6, above is not acceptable.
TABLE 4.10
Correlations Analysis
Variables LM MS MO EI GSCM
LM 1.000
MS .479 1.000
MO .297 .345 1.000
EI .413 .548 .370 1.000
GSCM .283 .223 .203 .543 1.000
62
Correlation between MS and LM ( 0.479 ), MO and LM ( 0.297 ) ,MO and
MS ( 0.345 ) , EI and LM ( 0.413 ) , EI and MO ( 0.370 ), GSCM and LM (
0.283 ) is moderate relationship .
TABLE 4.11
The result of multiple regression analysis among independent and variable dependent
variable can be illustrated in Table 4.11.The model summary table shows that R ,
correlation of four independent variable which are logistics management,
manufacturing strategies, marketing opportunities, environmental implementation
with dependent variable : green supply chain management in firms’ is equal to 0.559 .
After inter – correlation R square ( 0.559 ) is generated to the adjustable square of R (
0.289 )². It means 7.5 percent of four independent variable influence on the
dependent variable. In other words , 7.5 percent of variance in firm was explained by
the independent variable and the remaining 92.5 percent cannot be explained by the
regression analysis and represent by the other variable of factor.
63
TABLE 4.12
ANOVA
Model F Sig.
1 13.066 .000ᵃ
a. Predictors: (Constant), Logistics Management, Manufacturing Strategies,
Marketing Opportunities, Environmental Implementation
b. Dependent Variable: Green Supply Chain Management
In Table 4.12 illustrate that the value 0.000 value becomes significant , it is
indicative of the presence of all the independent variable has a strong relation with
dependent variable ( p < 0.05 ). The research model is fit (good) and useful. If the
model ( p > 0.05) it should be excluded .
TABLE 4.13
Coefficientsa
Model Unstandardized Standardized t Sig.
Coefficients Coefficients
B Std. Error Beta
1 (Constant) 1.978 0.490 4.040 0.000
Logistics Management 0.128 0.101 0.115 1.271 0.206
Manufacturing Strategies -0.160 0.112 -0.149 -1.511 0.133
Marketing Opportunities 0.011 0.118 0.008 0.094 0.925
Environmental Implementation 0.574 0.097 0.574 5.948 0.000
64
Regression analysis of coefficient in table 4.13 to determine the coefficient between
independent variable and dependent variable. The result from the table shows that the
Beta of logistics management is ( 0.115 ) ,followed by manufacturing strategies ( -
0.149 ) , marketing opportunities ( 0.008 ) and environmental implementation ( 0.574
) . Based on the result , environmental implementation has the highest influence on
green supply chain management in firm which is ( Beta = 0.574 ).
Since the significant value less than 0.05 ( p < 0.05 ) , more precisely only one
significant which is environmental implementation ( 0.000 ) has a strong influence
towards green supply chain management. Other three significant value more than
0.05 ( p > 0.05 ) is not influencing green supply chain management which is logistics
management ( 0.206 ), manufacturing strategies ( 0.133 ) and marketing opportunities
( 0.925 ). All this three independent variable is considered rejected due to less p-
value or significant value.
The regression analysis is conducted to fulfil some other research objective in this
study which to examine the relationship between logistics management,
manufacturing strategies, marketing opportunities and environmental implementation
with green supply chain management in firm . Based on the regression analysis
results, it can be concluded that environmental implementation is the factor that
mostly influence green supply chain management with the t-value ( 5.948 ) the
highest among all variable.
The regression analysis for research model between independent variable logistics
management, manufacturing strategies, marketing opportunities and environmental
implementation and dependent variable green supply chain management to the
relationship ( B ) unstandardized coefficient.
65
The dependent Variable , Y
Research Model : Y = β₀ + β₁ X₁ + β₂ X₂ + β₃ X₃ + β₄ X₄
Model Significant : Y = 1.978 + 0.128 X₁ + 0.160 X₂ + 0.011 X₃ + 0.574 X₄
4.9 Findings.
TABLE 4.14
65
4.10 Conclusion of Chapter four.
In this chapter, data analysis methods, study results and a discussion of the firm
survey and findings have been presented. Data findings were described as correlations
to the study variables and presented as tabulations. This study has demonstrated the
measurement of the relationship between customer and firms in Malaysia .The
researchers and strategies focusing on dependent variable green supply chain
management and independent variable logistics management, manufacturing
strategies, marketing opportunities and environmental implementation.
66
CHAPTER FIVE
5.1 Introduction
This survey was conducted about three months and the researcher took an opportunity
to deliver suggestion to the firms in Malaysia, the ‘green’ awareness and
subsequently the practices of green supply chain management identified the
relationship with logistics management, manufacturing strategies, marketing
opportunities and environmental implementation. Lastly , the chapter presents the
discussion of findings, limitation of study, implication of study, recommendation,
future research and conclusion.
This study explored how the theoretical framework model was constructed for better
interpretation and understanding the variables practices in Malaysia firms. The main
67
objective of this paper is to examine the performance relationship on the firms
practices the green supply chain management integrated with logistics management,
manufacturing strategies, marketing opportunities and environmental implementation
in order to develop the green and how it’s applied. Firms, are starting to be aware the
importance of green supply chain management to understand and enhance
organizational performance from an environmental perspective as well as economic
and operational .
In this respect, it was noted that the majority of respondents are male and most of
them age between 36 to 50 years old. It is normal for males to dominate this firm
sectors and the females shows they are coming closer eventually in electronic
industrial. It is also important to note that the majority respondents having diploma
50.8 percent in a education level with working experience between 5 to 10 years and
obtain monthly income RM 3001 to RM 5000. As portrayed in the demographic
profile, majority type of industrial is manufacturing firm frequency of 47 which
cover 39.2 percent , number of employee majority between 51 to 500 and the
highest annual turnover between RM500,000 to RM5,000,000.
68
The normality test shows good in manufacturing strategies, environmental
implementation and green supply chain management in between the range of ( -1.5
to + 1.5 ). Logistics management and marketing opportunities is not good which
beyond the limit range and has high probability for extreme value. Furthermore the
result from regression analysis has concluded that environmental implementation is
the factor that mostly influence green supply chain management with the t-value (
5.948 ) the highest among all variable
Discussion from previous chapter all the hypothesis well supported and the result of
the hypotheses testing are interpreted used process analysis Statistical Package for
Social Science ( SPSS) .Through this process, the researcher determined the influence
between the variable through inferential analysis in order to test all the research
questions. The overall hypothesis result and findings shows the logistics management,
manufacturing strategies, and marketing opportunities relationship with green supply
chain management indicated poor result because the p-value or significant value is
not less than 0.05 ( p < 0.05). The only accepted result is the relationship between
environmental implementation and green supply chain management because p-value
or significant value is less than 0.05 (p < 0.05)
According to the finding and further investigation on this topic , firms participant in
environmental and green management initiatives of manufactures such as product
return and recycling policy and incentive schemes to achieve financial objective are
promising and encourage GSCM research to focus more for the country development
to achieve nation objective.
First, besides the mail questionnaires method that used in the data collection may be
bias due to variety factors such as questionnaires may pass to different target
69
respondents and they had limited understandings about GSCM. It would therefore be
useful to include interviews, site visits and documents research to increase the
research validity (Lee, 2009). The focus on ISO14001 certified manufacturing firm in
Malaysia excluded those organizations without formal environmental management
certification but may have well developed environmental programs. Hence, the
findings cannot be generalized to all organizations in Malaysia. As cited in (Zhu et
al., 2007a, b), large sample size assist comparison of the result between sectors
(Eltayeb et al., 2010). Thus, future research should include a larger sample and this
would allow detailed cross-sectorial comparisons too.
Secondly ,problems arise in manufacturing firms that how to execute the green supply
chain management in special industrial operational institute has limited procedures.
Research to obtain companies performance have limitation on this study causes of
relation and information in the organization which could cause surveyed of spurious
result.
By this study , firm are increasingly exploring ways to leverage GSCM systematically
evaluating the role of supplier and organization activities to enhance the flow of
goods from immediate strategies supplier through manufacturing and distribution
chain to the end user. The public become more aware on the environmental issues
where the companies always trying know how to green manufacturing process by
recycling the produced product after use ( Vachon and Klassen , 2007) .
70
Organizations actively take proactive steps through green supply chain to make
sustainable development a reality (Eltayeb & Zailani, 2009). Hence, by using the
derived results in analysis, the firm focus on GSCM practices that have positive
influence on organizational performance. GSCM as a strategy to minimize the
negative impact on the environment through activities within the organization and
supply chain. It also prioritize cooperation with supplier and customer in the product
development process[19] Vachon and Klassen (2006A)[12]. Also minimize the
impact of firm’s activities on the environment , the green supply chain management
has to improve from beginning of the process to the end of product’s for better life
cycle. ( Green et al.2008 ). The green manufacturing activities include incorporation
of closed loop manufacturing to reduce or minimized emission ( Rao ,2008) and
solid liquid waste ( Pagell et al ., 2007).
GSCM has also begun to gain popularities in emerging economy countries, for
example Eltayeb et al. (2011) studied the outcomes of green supply chain initiatives
among ISO 14001 certified firms in Malaysia , whereas Zailini et al.( 2012) , carried
out a study on GSCM research in Malaysia to analyse the impact and internal and
external forces on environmental performance. The marketing approach has emerged
in response to a global increase in concern about protecting consumer rights, and a
concurrent growth of organized movements to address environmental trends in such a
way that people will be protected and assured a clean and safe environment in which
to live.
Marketing approach is likely to open new horizons and good opportunities for
organizations that practice green marketing. This, in turn, is likely to provide
organizations with the ability to avoid traditional competition and to thereby achieve
competitive leadership in the market, especially when they introduce environmentally
friendly products and target those who had environmental trends in the market. This
competitive situation will lead to more profits in addition to promoting a good
reputation and meeting the owners’ needs.
71
5.5. Recommendations.
Review the independent variable categories and should add more independent
variable than this study. This will give more scope of study and can broad the
researcher bigger perspective view understanding the needs of the firm
objective to achieve the higher level of satisfaction.
72
Researcher to improvise an open concept relationship in terms of
communication with the respondent to be more friendly and eliminate
suspicious and doubt on the survey that been conducted . This is the hurdles
normally researcher foreseen and should consolidate appropriate mechanisms
to smoothed the process of survey topic.
This future research continues to find what this and other studies have alluded to, it
may be useful to address the issue more actively by raising awareness .Beyond
addressing the limitations listed in the previous section, future research possibilities
based on the findings from this dissertation are interesting and exciting. Possible
future research paths concentrate on theoretical issues, investigation of new
conceptual questions, and the execution of new empirical studies to improve upon the
conclusions of the findings.
73
In the external validity, this research need further investigation and examine
additional empirical research to test the primary components of external validity,
namely statistical generalizability, regression analysis , and situational replicability
(Ferber1977; Lynch 1982). One way to do this is by expanding the sample to include
the firms related study could investigate the differences between industrialized,
newly industrialized, and developing firms in Malaysia. Another way to assess the
external validity of research is to triangulate methods to see if the findings of different
research methodologies are consistent with one another (McGrath 1982). Qualitative
research would be one such methodology.
Qualitative research could also be used to gain insight into the origins of corporate
orientations. The theoretical model in this dissertation relied heavily on two
74
orientations to help explain the use of GSCM practices in the firm and their
outcomes. Extending the research using longitudinal survey data to see how green
SCM practices are evolving in firms would be another interesting and worthwhile
research project. This project could be linked with qualitative studies to see how
closely organizational behaviour about logistics management, manufacturing
strategies, marketing opportunities and environmental implementation follow
patterns of firm investment in GSCM practices. Longitudinal data could also be
collected using secondary sources such as annual reports, press releases, corporate
sustainability reports, and other public information.
The finding from this study reveal that GSCM has broad foundation for an on going
program of research concerning the integration of environmental and economic
concerns gaining momentum in Malaysia. This study is unique from previous
research by helping to explain the role GSCM plays in the firm, its antecedents and its
outcomes. Firm are starting to implement green practices and it is likely to continue
since there are demands and several push and pull factors that motivate them to do so.
GSCM practices adoption differs between firms depending on their product and
services. Basically, firm get involved with green purchasing and implement internal
green practices as their effort to support the greening of the supply chain.
Nevertheless, some firms adopt reverse logistics , eco design and cooperate with their
chain partners in maintaining green business strategy. Although GSCM approaches
are still relatively new in Malaysia, it has started to be implemented by manufacturing
firms in Malaysia.
75
BIBLIOGRAPHY
76
Azzone, G. and U. Bertelè (1994), "Exploiting Green Strategies for Competitive
Advantage,"Long Range Planning, 27 (6), 69-81.
77
Beamon, B. M. (1999), "Designing the Green Supply Chain," Logistics Information
Management, 12 (4), 332-342.
Borch, F. (1957), The Marketing Philosophy as a Way of Business Life. New York:
American Management Association. Bowen, F., P. Cousins, R. Lamming and A.
Faruk (2006), Horses for Courses: Explaining the Gap Between the Theory and
Practice of Green Supply. London: Springer. Bowen, F. E., P. D. Cousins, R. C.
Lamming and A. C. Faruk (2001), "The Role of Supply Management Capabilities in
Green Supply," Production and Operations Management, 10 (2), 174-189.
Bowersox, D., D. Closs and M. Cooper (2002), Supply Chain Logistics Management.
Boston: McGraw-Hill. Boyer, K. K. and M. L. Swink (2008), "Empirical Elephants—
Why Multiple Methods are Essential to Quality Research in Operations and Supply
Chain Management," Journal of Operations Management, 26 (3), 337-348.
78
Carroll, A. B. (1979), "A Three-Dimensional Conceptual Model of Corporate
Performance,"Academy of Management Review, 4 (4), 497-505.
Carter, C. R., R. Kale and C. M. Grimm (2000), "Environmental Purchasing and Firm
Performance: An Empirical Investigation," Transportation Research Part E, 36 (3),
219-228.
79
APPENDIX -A
QUESTIONNAIRE
80
A Survey on Logistics Management, Manufacturing Strategies, Marketing
Opportunities, and Environmental Implementation, practices Green Supply
Chain Management in Malaysia firms
Dear Sir/Madam,
This survey examines various aspects of supply chain practice between your firm and
external (supplier and customer). Your participation is critical to the success of the
study. All responses will be kept confidential and will not traceable to individual
respondent. There are no right or wrong answer to the following questions. We are
only interested in your assessment of your organization’s activities.
You will be asked questions concerning the company’s current business practice. If
you are unable to complete the questionnaire yourself, please entrust the task to
another who is knowledgeable about supply chain integration, firm performance and
supply chain performance. The questionnaire should take about 20 minutes to
complete. Kindly spare a few minutes from your busy schedule to complete the
questionnaire as your participation is of value to this study.
Once you have completed the questionnaire, please email it directly to me . Thank
you in advance for your kind cooperation and in case of enquiry, please do not
hesitate to contact the undersigned.
M.Letchumanan Malaidom
Executive Masters ( Asia e University )
No 9, Jalan SS3 ,
Taman Seri Selandang
Tel: 019-3359141
Email: letchvishnu@gmail.com
81
SECTION A : Demographic Profile
Please tick ( / ) at the appropriate box.
1. Gender .
Male Female
2. Age.
< 25 26 - 35
36 - 50 >. 50
3. Working Experience ( Year )
< 1 2 - 4
5 - 10 >. 10
4. Annual Turnover .
< 100,000 100,000 - 500,000
5. Type of Industrial .
Manufacturing Electronic
Construction Service
6. Number of Employee.
< 50 51 - 500
7. Monthly Income ( RM ).
<. 1000 1001 - 3000
82
Please tick ( / ) an appropriate level of agreement on the following statements based
on your experience :
1. = Strongly Disagree.
2. = Disagree.
3. = Satisfy.
4. = Agree.
5. = Strongly Agree
83
SECTION D : Marketing Opportunities
84
SECTION F : Green Supply Chain Management
85
APPENDIX -B
SPSS RESULTS
86
SPSS ANALYSIS : 4.1 Demographic Profile
87
Frequency Table : Age
88
Frequency Table : Working Experience
89
Frequency Table : Annual Turnover
90
Frequency Table : Type Industrial
91
Frequency Table : Number of Employee
92
Frequency Table : Monthly Income
93
Frequency Table : Education
94
SPSS ANALYSIS : 4.4 Normality Test – Skewness and Kurtosis test
Frequency : Statistics
LM MS MO EI GSCM
Valid 120 120 120 120 120
N
Missing 0 0 0 0 0
Skewness -1.132 -.677 -.779 -.434 -.366
Std. Error of Skewness .221 .221 .221 .221 .221
Kurtosis 3.817 1.447 1.768 -.001 -.064
Std. Error of Kurtosis .438 .438 .438 .438 .438
Logistics Management ( LM )
Frequency Percent Valid Cumulative
Percent Percent
2.00 2 1.7 1.7 1.7
2.67 2 1.7 1.7 3.3
3.00 2 1.7 1.7 5.0
3.17 3 2.5 2.5 7.5
3.33 10 8.3 8.3 15.8
3.50 13 10.8 10.8 26.7
3.67 19 15.8 15.8 42.5
Valid 3.83 24 20.0 20.0 62.5
4.00 24 20.0 20.0 82.5
4.17 11 9.2 9.2 91.7
4.33 5 4.2 4.2 95.8
4.50 2 1.7 1.7 97.5
4.67 2 1.7 1.7 99.2
4.83 1 .8 .8 100.0
Total 120 100.0 100.0
95
Manufacturing Strategies : (MS)
Frequency Percent Valid Cumulative
Percent Percent
2.50 1 .8 .8 .8
2.67 4 3.3 3.3 4.2
3.00 2 1.7 1.7 5.8
3.17 2 1.7 1.7 7.5
3.33 5 4.2 4.2 11.7
3.50 11 9.2 9.2 20.8
3.67 15 12.5 12.5 33.3
Valid 3.83 27 22.5 22.5 55.8
4.00 22 18.3 18.3 74.2
4.17 12 10.0 10.0 84.2
4.33 13 10.8 10.8 95.0
4.50 2 1.7 1.7 96.7
4.67 3 2.5 2.5 99.2
5.00 1 .8 .8 100.0
Total 120 100.0 100.0
96
Marketing Opportunities : (MO)
Frequency Percent Valid Cumulative
Percent Percent
2.67 1 .8 .8 .8
2.83 1 .8 .8 1.7
3.00 2 1.7 1.7 3.3
3.17 1 .8 .8 4.2
3.33 5 4.2 4.2 8.3
3.50 3 2.5 2.5 10.8
3.67 14 11.7 11.7 22.5
Valid
3.83 27 22.5 22.5 45.0
4.00 36 30.0 30.0 75.0
4.17 8 6.7 6.7 81.7
4.33 15 12.5 12.5 94.2
4.50 5 4.2 4.2 98.3
4.67 2 1.7 1.7 100.0
Total 120 100.0 100.0
97
Environmental Implementation : (EI)
Frequency Percent Valid Cumulative
Percent Percent
2.67 3 2.5 2.5 2.5
2.83 2 1.7 1.7 4.2
3.00 6 5.0 5.0 9.2
3.17 4 3.3 3.3 12.5
3.33 6 5.0 5.0 17.5
3.50 6 5.0 5.0 22.5
3.67 13 10.8 10.8 33.3
Valid 3.83 24 20.0 20.0 53.3
4.00 18 15.0 15.0 68.3
4.17 14 11.7 11.7 80.0
4.33 8 6.7 6.7 86.7
4.50 11 9.2 9.2 95.8
4.67 2 1.7 1.7 97.5
4.83 3 2.5 2.5 100.0
Total 120 100.0 100.0
98
Green Supply Chain Management : (GSCM)
Frequency Percent Valid Cumulative
Percent Percent
2.75 2 1.7 1.7 1.7
3.00 2 1.7 1.7 3.3
3.25 6 5.0 5.0 8.3
3.50 11 9.2 9.2 17.5
3.75 14 11.7 11.7 29.2
Valid 4.00 32 26.7 26.7 55.8
4.25 19 15.8 15.8 71.7
4.50 17 14.2 14.2 85.8
4.75 14 11.7 11.7 97.5
5.00 3 2.5 2.5 100.0
Total 120 100.0 100.0
99
SPSS ANALYSIS : 4.3 Reliability Analysis
Reliability Statistics :
Cronbach's N of
Alpha Items
.712 6
100
Manufacturing Strategies (MS)
Reliability Statistics
Cronbach's N of
Alpha Items
.676 6
Reliability Statistics
Cronbach's N of
Alpha Items
.552 6
101
Environmental Implementation (EI)
Reliability Statistics
Cronbach's N of Items
Alpha
.726 6
Reliability Statistics
Cronbach's N of
Alpha Items
.631 4
102
SPSS ANALYSIS : 4.4 Mean and Standard Deviation of Logistics Management
103
SPSS ANALYSIS : 4.7 Mean and Standard Deviation of Environmental
Implementation.
Descriptive Statistics
N Minimum Maximum Mean Std. Deviation
EI1 120 2.00 5.00 3.6667 .86319
EI2 120 2.00 5.00 3.7583 .68594
EI3 120 2.00 5.00 3.7250 .68553
EI4 120 2.00 5.00 3.6917 .70765
EI5 120 2.00 5.00 4.0833 .69310
EI6 120 1.00 5.00 4.2417 .80956
Valid N (listwise) 120
Descriptive Statistics
N Minimum Maximum Mean Std. Deviation
GSCM1 120 2.00 5.00 4.0667 .71870
GSCM2 120 2.00 5.00 4.0583 .67731
GSCM3 120 2.00 5.00 3.9250 .73522
GSCM4 120 3.00 5.00 4.2417 .67358
Valid N (listwise) 120
Statistics
LM MS MO EI GSCM
Valid 120 120 120 120 120
N
Missing 0 0 0 0 0
Mean 3.7666 3.8456 3.9230 3.8609 4.0729
Std. Deviation .43500 .42860 .34819 .48309 .48333
104
SPSS ANALYSIS : 4.10 Correlation Analysis
Correlations
LM MS MO EI GSCM
Pearson Correlation 1 .479** .297** .413 **
.283**
LM Sig. (2-tailed) .000 .001 .000 .002
N 120 120 120 120 120
**
Pearson Correlation .479 1 .345** .548 **
.223*
MS Sig. (2-tailed) .000 .000 .000 .014
N 120 120 120 120 120
**
Pearson Correlation .297 .345** 1 .370 **
.203*
MO Sig. (2-tailed) .001 .000 .000 .026
N 120 120 120 120 120
**
Pearson Correlation .413 .548** .370** 1 .543**
EI Sig. (2-tailed) .000 .000 .000 .000
N 120 120 120 120 120
**
Pearson Correlation .283 .223* .203* .543 **
1
GSC
Sig. (2-tailed) .002 .014 .026 .000
M
N 120 120 120 120 120
**. Correlation is significant at the 0.01 level (2-tailed).
*. Correlation is significant at the 0.05 level (2-tailed).
Variables Entered/Removeda
105
SPSS ANALYSIS : 4.11 Analysis on Coefficient of Determination ( R2)
Model Summary
Mode R R Square Adjusted R Std. Error of the
l Square Estimate
1 .559a .312 .289 .40768
a. Predictors: (Constant), EI, MO, LM, MS
ANOVAa
Model Sum of df Mean F Sig.
Squares Square
Regression 8.686 4 2.172 13.066 .000b
1 Residual 19.113 115 .166
Total 27.799 119
a. Dependent Variable: GSCM
b. Predictors: (Constant), EI, MO, LM, MS
Coefficientsa
Model Unstandardized Standardized t Sig.
Coefficients Coefficients
B Std. Error Beta
(Constant) 1.978 .490 4.040 .000
LM .128 .101 .115 1.271 .206
1 MS -.169 .112 -.149 -1.511 .133
MO .011 .118 .008 .094 .925
EI .574 .097 .574 5.948 .000
a. Dependent Variable: GSCM
106