Scribd Logo
Upload

Welcome to Scribd!

  • 25 views

    Bituprotect 01

    Uploaded by

    mk779900mk
    This document summarizes the BITUMAT BITUPROTECT bituminous protection board. It is a semi-rigid panel made of mineral-reinforced bitumen sandwiched between two layers of dimensionally stable bitumen-saturated glass mat. It is used to protect waterproofing membranes during construction from damage caused by backfilling activities. Key features include puncture resistance, impact resistance, durability, water resistance, and ability to withstand foot traffic and soil movements. It is easy to install over waterproofing membranes on horizontal and vertical surfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Bituprotect 01

    Uploaded by

    mk779900mk
    25 views2 pages
    This document summarizes the BITUMAT BITUPROTECT bituminous protection board. It is a semi-rigid panel made of mineral-reinforced bitumen sandwiched between two layers of dimensionally stable bitumen-saturated glass mat. It is used to protect waterproofing membranes during construction from damage caused by backfilling activities. Key features include puncture resistance, impact resistance, durability, water resistance, and ability to withstand foot traffic and soil movements. It is easy to install over waterproofing membranes on horizontal and vertical surfaces.

    Original Description:

    bituprotect-01

    Original Title

    bituprotect-01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document summarizes the BITUMAT BITUPROTECT bituminous protection board. It is a semi-rigid panel made of mineral-reinforced bitumen sandwiched between two layers of dimensionally stable bitumen-saturated glass mat. It is used to protect waterproofing membranes during construction from damage caused by backfilling activities. Key features include puncture resistance, impact resistance, durability, water resistance, and ability to withstand foot traffic and soil movements. It is easy to install over waterproofing membranes on horizontal and vertical surfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    25 views2 pages

    Bituprotect 01

    Uploaded by

    mk779900mk
    This document summarizes the BITUMAT BITUPROTECT bituminous protection board. It is a semi-rigid panel made of mineral-reinforced bitumen sandwiched between two layers of dimensionally stable bitumen-saturated glass mat. It is used to protect waterproofing membranes during construction from damage caused by backfilling activities. Key features include puncture resistance, impact resistance, durability, water resistance, and ability to withstand foot traffic and soil movements. It is easy to install over waterproofing membranes on horizontal and vertical surfaces.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    BITUPROTECT

    Bitumenous Protection Board

    DESCRIPTION • Compatible with most waterproofing systems,


    especially the bituminous systems.
    BITUMAT BITUPROTECT is a high strength, • Much more durable than fibre boards which
    indentation and impact resistant panel, fabricated soften in due course of time.
    from mineral reinforced bitumen formed between • Easy to install.
    two layers of dimensionally stable bitumen • Salt chemical resistant
    saturated glass mat, hot fused and pressed during
    the manufacturing process to form a semi rigid GENERAL DATA
    panel with thin black finish Polyethylene film on
    both sides. Nominal Weight : 4 to 8 kg per M2
    Nominal Thickness : 3, 4 & 6MM
    USES Nominal Board Size : 1.0x 2 Mtr.

    BITUMAT BITUPROTECT is a universal protection


    INSTALLATION
    panel used to protect the waterproofing systems
    from damage during construction activities and
    BITUMAT BITUPROTECT should be installed
    backfilling. It can also be used as a protection
    continuously over the waterproofing membrane
    panel or, as a walk pad over exposed roofs or
    and can be cut easily with a roofer’s knife to fit all
    around mechanical equipments installed on roofs.
    areas. For horizontal surfaces, but the BITUMAT
    BITUPROTECT sheets together. If necessary, cut
    BITUMAT BITUPROTECT with its high resistance
    the sheets to fit all inter sections and protrusions.
    to puncture and impact becomes an ideal
    On vertical surface, butt the sheets and hold
    protection to the membrane against sharp
    temporarily in place until backfill is accomplished.
    aggregate and other alien matter that comes along
    with the backfill. It even provides protection against
    BITUMAT BITUPROTECT can be fixed by cold /
    unintentional physical abuse caused by other
    hot applied adhesives of bitumen depending upon
    tradesmen.
    the type of membrane used. When properly applied
    by workmen trained in roof waterproofing
    OUTSTANDING FEATURES techniques, BITUMAT BITUPROTECT will serve
    as an effective protection system for a long time.
    • Semi flexible but tough, can withstand normal
    soil or structural movements. Backfilling
    • Water resistant, withstands wet soil conditions.
    • Absorbs the impact of aggregates. Backfilling against vertical walls should be done
    • Withstand foot traffic. within 48 hours maximum after installing the
    • Protects the waterproofing membrane from protection board. For horizontal applications,
    penetration of sharp edges of steel reinforcement.
    BITUPROTECT
    Bitumenous Protection Board

    waterproofing and protection board should be Packaging


    installed just prior to the installation of the 3mm - 200 pieces
    wearing surface. Backfill material should not be 4mm - 150 pieces
    dropped against the protection course in such a 6mm - 100 pieces
    manner that it could drag the sheet down as it 12 pallets per trailer
    drops.

    TECHNICAL DATA PTM04 30-G R-02 30-I

    Test
    Property Typical Data
    Method

    1 Penetration at 25°dmm 6-12 ASTM D 5

    ASTM D 570
    2 Water absorption % 24 hours 0.2 ASTM D 994

    3 Bitumen content % Min. 65 ASTM D 4

    4 Softening point °C 120-135 ASTM D 36

    5 Water permeability Impermeable ASTM E 96

    6 Chemical and Salt resistance Excellent BITUMAT

    3mm 4mm 6mm


    7 Puncture resistance N 150-220 180-250 300-350 ASTM E 154

    The information given in this Technical Data Sheet reflects typical median properties based on laboratory test, and practical experience; subject to the tolerance levels
    of UEAtc directives. However, as the product is often used under conditions beyond our control, we can’t warrant but the product itself.

    THIS PUBLICATION AUTOMATICALLY SUPERSEDES ALL PREVIOUS PUBLICATIONS RELATING TO THIS PRODUCT.

    You might also like