Scribd Logo
Upload

Welcome to Scribd!

  • 24 views

    Torch Bond

    Uploaded by

    mk779900mk
    BITUMAT TORCHBOND is a prefabricated waterproofing membrane made of bitumen and glass fiber reinforcement. It has outstanding flexibility, tensile strength, workability and resistance to elements. The membrane complies with French and German standards and is quality controlled. It is installed using a torch and forms an impervious, flexible and waterproof barrier that accepts structural movement. BITUMAT TORCHBOND can be used for roofing, reservoirs, basements and other waterproofing applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Torch Bond

    Uploaded by

    mk779900mk
    24 views2 pages
    BITUMAT TORCHBOND is a prefabricated waterproofing membrane made of bitumen and glass fiber reinforcement. It has outstanding flexibility, tensile strength, workability and resistance to elements. The membrane complies with French and German standards and is quality controlled. It is installed using a torch and forms an impervious, flexible and waterproof barrier that accepts structural movement. BITUMAT TORCHBOND can be used for roofing, reservoirs, basements and other waterproofing applications.

    Original Description:

    Torch Bond

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    BITUMAT TORCHBOND is a prefabricated waterproofing membrane made of bitumen and glass fiber reinforcement. It has outstanding flexibility, tensile strength, workability and resistance to elements. The membrane complies with French and German standards and is quality controlled. It is installed using a torch and forms an impervious, flexible and waterproof barrier that accepts structural movement. BITUMAT TORCHBOND can be used for roofing, reservoirs, basements and other waterproofing applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    24 views2 pages

    Torch Bond

    Uploaded by

    mk779900mk
    BITUMAT TORCHBOND is a prefabricated waterproofing membrane made of bitumen and glass fiber reinforcement. It has outstanding flexibility, tensile strength, workability and resistance to elements. The membrane complies with French and German standards and is quality controlled. It is installed using a torch and forms an impervious, flexible and waterproof barrier that accepts structural movement. BITUMAT TORCHBOND can be used for roofing, reservoirs, basements and other waterproofing applications.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 2

    TORCHBOND

    Oxidized Bitumen Membrane with


    Glassfibre Matt Reinforcement

    DESCRIPTION STANDARDS AND CONTROL

    BITUMAT TORCHBOND is a prefabricated BITUMAT TORCHBOND complies with the


    waterproofing membrane with a special requirement and tolerance level of the following
    multilayered design for outstanding pliability, standards:
    tensile strength, workability and resistance to NF P 84314 Type 40 V V(France)
    elements. The multilayered design consists of a DIN 52131 V60 S4 (West Germany)
    glassfibre core coated on both sides with bitumen.
    The bitumen is a catalytically air blown asphalt. In addition to stringent regular tests by BITUMAT
    The glassfibre core gives the membrane good laboratory, periodic visits and Quality Control Tests
    tensile strength and excellent dimensional are performed by SOCOTEC, Paris, France.
    stability.
    INSTALLATION TOOLS REQUIRED
    BITUMAT TORCHBOND combines the proven
    waterproofing quality of bitumen and the sureness 1. Gas Torch
    and simplicity of torch-on application. Properly 2. Knife
    installed, BITUMAT TORCHBOND forms an 3. Trowel
    impervious, flexible and waterproof blanket which 4. Measuring Tape
    accepts normal structural movement without 5. Marking String
    breaking or cracking. 6. Gloves

    USES APPLICATION

    BITUMAT TORCHBOND membranes may be BITUMAT TORCHBOND is installed by torch


    used for a wide range of waterproofing applications welding method, loose-laid or fully bonded to
    including roofs, reservoirs, basements, tunnels substrate. When loose-laid, only overlaps are
    and car parks and so on. bonded together.
    Peripheries and protrusions are sealed according
    OUTSTANDING FEATURES to specifications.

    • Excellent cost performance ratio COVERAGE RATE (Approx.)


    (Rate may vary as per site requirement)
    • Good resistance to fatigue and tear
    • Outstanding bondability & seam integrity Flat areas : 1.15 M2/M2 per layer with 10
    • Impact and puncture resistant cms. side laps and 15 cms.
    end laps.
    • Single layer installation reduces costs Base flashing : 100x35 cms. with 15 cm. end
    laps, 0.40 M2/ linear M
    GENERAL DATA Average wastage : 3 - 5 %

    Nominal Weight : 3,4 or 5 kg/M2 TORCHING GUIDELINES


    Nominal Thickness : 3,4 or 5MM
    Nominal Roll Size : 1x10 Mt. 1. The undeside of the membrane should
    Re-inforcement : 50-60 gms/M2 be torched just enough to superficially
    Nonwoven glassmat melt the bitumen. Excessive heating may
    damage the reinforcement.
    FINISHES 2. Overlaps should be reheated from the top
    and resealed with a trowel to ensure
    Black finish with thin, heat fusible, polyethylene seam integrity.
    film on both sides. 3. For details of installation methods and
    flashing requirements, consult the
    relevant BITUMAT Systems Design and
    Installation Manual.
    TORCHBOND
    Oxidized Bitumen Membrane with
    Glassfibre Matt Reinforcement

    TECHNICAL DATA
    Property Typical Value Test Method
    1. Softening point, °C 115 + 5 ASTM D 36
    2. Penetration @ 25°C., dmm 20 - 35 ASTM D 5
    3. Low temperature flexibility, °C +5 to 0 UEAtc
    4. Heat resistance, 2 hours, °C 70 UEAtc
    5. Tensile strength, N/5 cm
    Longitudinal 350 + 20% UEAtc
    Transverse 300 + 20% ASTM D 146
    6. Elongation, %
    Longitudinal 3.5 + 15% UEAtc
    Transverse 3 + 15% ASTM D 146
    7. Tear resistance, N
    Longitudinal Min. 60 UEAtc
    Transverse Min. 80
    The information given in this Technical Data Sheet reflects typical median properties based on laboratory test, and practical experience; subject to the tolerance levels of
    UEAtc directives. However, as the product is often used under conditions beyond our control, we can’t warrant but the product itself.

    THIS PUBLICATION AUTOMATICALLY SUPERSEDES ALL PREVIOUS PUBLICATIONS RELATING TO THIS PRODUCT.

    MSD O9/2003

    You might also like