Main Catalogue 2021

MAIN
CATALOG
2021
Cordless Alliance System:
One battery,
many solutions.
ROTHENBERGER is part of it!

Discover cordless freedom! Profit from 100% compatibility of machines, battery packs and chargers in
one cross-manufacturer system! With CAS the world‘s most powerful battery pack system in the
industry from Metabo and more than 30 years of battery pack competency are now available for
ROTHENBERGER machines. How do you benefit from it? Maximum reliability, clear cost advantages
and high investment reliability.
More information can be found at www.cordless-alliance-system.com

Welcome to ROTHENBERGER!
We at ROTHENBERGER are driven by the needs of plumbers, service
technicians and installers. We develop pipe tools and machines that
assist craftspeople, to ensure construction sites are always under
control.
To achieve this, we see the world through your eyes, familiarise

ourselves closely with your everyday work and listen to you if you
provide us with suggestions or criticism. In addition, all of our new
products undergo an on-site endurance test. Only if they pass this
test do they make it to the market.
If you are able to complete your work cleanly, quickly, easily and
profitably, and go home happy, then we have done a good job.
3
Focus on users
ROTHENBERGER was founded as a trading house in 1949. As early as 1967 ROTHENBERGER
has developed the first system solution, the R-System. It consisted of tools for expanding,
extracting and bending pipes – revolutionary equipment enabling installers to connect
pipes without fittings, significantly speeding up the installation process.
Today, ROTHENBERGER serves installers and ACR technicians worldwide with products
which have been co-developed, tested and improved by professional users.
4
Solutions for professionals:
systems that fit.
Our system solutions extend beyond tools:
Transport and store equipment and machines in
the ROCASE system. Re-use our ROBOX packaging
as containers for consumables in the ROCASE.
Use our CAS1) batteries to operate more than 140
compatible machines.
Service for professionals:

always prepared.
The RO SERVICE+ takes care of
maintenance and repairs: Our Service
After Sales team quickly gets equipment
back up and running without any detours,
because we have your tool collected
where you are and also deliver it to you
at the construction site, upon request.2)
2)
1)
ore information at cordless-alliance-system.com
M
2)
Complete terms and conditions at rothenberger.com/roservice
RO SERVICE+ only valid in participating countries 5
We are here for you.
You can reach us through many channels –
the website rothenberger.com, by email at
[email protected], by phone on our
customer hotline and on our technical
customer service hotline.
Visit us on Facebook, Instagram and YouTube!
6
Applications Page
Cutting 8 1
RODIA Diamond Core Drilling 36 2
Bending 54 3
Installation
Expanding, Extracting, Flaring 76 4
Pressing 98 5
Threading & Grooving 122 6
Soldering & Welding 144 7
Testing & Leak Detection 180 8

Service & Maintenance
Freezing 192 9
Inspection & Locating 198 10
Flushing & Pipe Cleaning 212 11
ROWELD Plastic Pipe Welding 246 12
Refrigeration & Air-

268 13
Conditioning Technology
General-Purpose Tools 290 14
Index – Alphabetical / Numeric,

334 15
Legend – Abbreviations / Pictograms
7
1
8
* Detailed guarantee terms at https://rothenberger.com/gb-en/5-year-replacement-warranty
(Only in participating countries)
EXCHANGE
GUARANTEE
*
1
Cutting
System overview 10 - 13
Cutting metal, manual
Tube cutter for copper and steel 14 - 18
Tube cutter for stainless steel (INOX) and steel 18 - 20
Cutting wheels and spare parts 21
Cutting plastic / MLP, manual
Plastic pipe shears 22 - 23
Tube cutter for plastic 24 - 26
Tube cutter for MLP 27
Sawing, manual
Hand saws and saw blades 28
Sawing, electric
Band saws 29
Universal saws 30
Saw blades 31
Deburring, chamfering and calibration
Universal internal and external deburrer 32 - 33
Deburrer for metal 34
Chamfering unit for plastic 35
9
Cutting
System overview
1 Pipe cutters for metal, plastic, MLP
TC 35 DURAMAG TC 35 C TC 35 DURAMAG TC 35 PRO INOX TC 42 PRO
MLP DURAMAG
Working range: Ø 6-35 mm (1/4-1.3/8”) Ø 6-35 mm (1/4-1.3/8”) Ø 6-35 mm (1/4-1.3/8”) Ø 6-35 mm (1/4-1.3/8”) Ø 6-42 mm (1/4-1.5/8”)
Dimensions: 150 x 60 x 40 mm 150 x 60 x 40 mm 150 x 60 x 40 mm 150 x 60 x 40 mm 160 x 60 x 40 mm
Weight: 255 g 470 g 255 g 255 g 550 g
Extras: Internal pipe deburrer, Internal pipe deburrer, Internal pipe deburrer, Internal pipe deburrer, Internal pipe deburrer,
spare cutter wheel spare cutter wheel spare cutter wheel spare cutter wheel spare cutter wheel
Suitable for: Cu, brass, Al, Refrigeration PE-,PP-, PVDF-, PVC, Stainless steel Cu, brass, Al,
thin-walled steel pipes technology plastic-coated pipes thin-walled steel pipes
Page 14 - 15 14 - 15 27 14 - 15 14 - 15
TC 42 XL TC 42 PRO MLP TC 42 PRO PVC TC 42 PRO INOX TC CSST
Working range: Ø 6-42 mm (1/4-1.5/8”) Ø 6-42 mm (1/4-1.5/8”) Ø 6-42 mm (1/4-1.5/8”) Ø 6-42 mm (1/4-1.5/8”) Ø 10-42 mm (3/8“-1.5/8“)
Weight: 430 g 550 g 550 g 550 g 430 g
Extras: Internal pipe deburrer, Internal pipe deburrer, Internal pipe deburrer, Internal pipe deburrer, Spare cutter wheel
spare cutter wheel spare cutter wheel spare cutter wheel spare cutter wheel
Suitable for:
Cu, brass, Al, PE, PP, PVDF, PE, PP, PVDF, Stainless steel Corrugated INOX
thin-walled steel pipes plastic-coated pipes plastic-coated pipes pipes up to 0.2 mm

Page 15 27 27 15 - 19 19
MINICUT I PRO MINICUT II PRO MINICUT 2000 MINI MAX TUBE CUTTER
30 PRO 50 30 PRO INOX
Working range: Ø 3-16 mm (1/8-5/8”) Ø 6-22 mm (1/4-7/8”) Ø 6-22 mm (1/4-7/8”) Ø 3-28 mm (1/8-1.1/8”) Ø 3-30 mm (1/8-1.3/8”)
Weight: 110 g 125 g 140 g 270 g 305 g
Extras: Spare cutter wheel, Spare cutter wheel, Spare cutter wheel, Spare cutter wheel, Internal pipe deburrer,
spare axle spare axle spare axle spare cutter wheel spare cutter wheel
Suitable for:
Cu, brass, Al, Cu, brass, Al, Cu, brass, Al, Cu, brass, Al, Cu, brass, Al,
thin-walled steel pipes thin-walled steel pipes thin-walled steel pipes thin-walled steel pipes thin-walled steel pipes

Page 16 16 16 16 17
10
utting
C
System overview
Pipe cutters for metal 1
TUBE CUTTER TUBE CUTTER Automatic pipe Automatic pipe Chain pipe
50 30 PRO INOX cutter size 1 cutter size 2 cutter
Working range: Ø 12-50 mm (1/2-2”) Ø 3-30 mm (1/8-1.1/8”) Ø 6-67 mm (1/4-2.5/8”) Ø 50-127 mm (2-5”) Ø 20-100 mm (1-4”)
Weight: 520 g 305 g 755 g 755 g 575 g
Extras: Internal pipe deburrer, Internal pipe deburrer, Internal pipe deburrer, Internal pipe deburrer
–
spare cutter wheel spare cutter wheel spare cutter wheel
Suitable for:
Cu, brass, Al, Stainless steel, Cu, brass, Al, Cu, brass, Al, Cu, brass, Al,
thin-walled steel pipes thin-walled steel pipes thin-walled steel pipes, thin-walled steel pipes, thin-walled steel pipes,
plastic-coated pipes plastic-coated pipes plastic-coated pipes
Page 17 18 17 17 17
ROSLICE 12 mm ROSLICE 15 mm ROSLICE 18 mm ROSLICE 22 mm TUBE CUTTER INOX

Working range: Ø 12 mm (1/2“) Ø 15 mm (5/8”) Ø 18 mm (3/4”) Ø 22 mm (7/8”) Ø 6-60 mm (1/4-2.3/8”)
Weight: 230 g 240 g 250 g 260 g 780 g
Extras:
– – – – –
Suitable for: Cu Cu Cu Cu Stainless steel
Page 18 18 18 18 19
ENORM 4” SUPER 1.1/4” SUPER 2” SUPER 1.1/4” INOX SUPER 2” INOX
Working range: Ø 60-115 mm (2-4”) Ø 10-42 mm (1/8-1.1/4”) Ø 10-60 mm (1/8-2”) Ø 10-42 mm (3/8-1.1/4”) Ø 10-60 mm (3/8-2”)
Weight: 7,105 g 1,040 g 2,155 g 1,040 g 2,155 g
Extras:
– – – – –
Suitable for: Steel Steel Steel Stainless steel Stainless steel

Page 20 20 20 20 20
11
Cutting
System overview
1 Plastic shears
ROCUT TC 26 ROCUT TC 32 ROCUT PS 35 ROCUT PS 26/42 S
Working range: Ø 0-26 mm (0-1”) Ø 0-32 mm (0-1.1/4”) Ø 6-35 mm (1/4-1.3/8”) Ø 6-42 mm (1/4-1.5/8”)
Dimensions: 190 x 80 x 30 mm 210 x 60 x 30 mm 215 x 195 x 40 mm 290 x 240 x 40 mm
Weight: 370 g 220 g 740 g 950 g
Suitable for: PP, PE, PEX, PB, PP, PE, PEX, PB, PP, PE, PEX, PB, PP, PE, PEX, PB,
PVDF, MLP PVDF, MLP PVDF, MLP PVDF, MLP
Page 22 - 23 22 - 23 22 - 23 22 - 23
ROCUT TC 42 ROCUT TC 50 ROCUT TC 63 ROCUT TC 75

Working range: Ø 0-42 mm (0-1.5/8”) Ø 0-50 mm (0-2”) Ø 0-63 mm (0-2.1/2”) Ø 0-75 mm (0-3”)
Weight: 447 g 600 g 700 g 1,740 g
Suitable for: PP, PE, PEX, PB, PP, PE, PEX, PB, PP, PE, PEX, PB, PP, PE, PEX, PB,
PVDF, MLP PVDF, MLP PVDF, MLP PVDF, MLP
Page 22 - 23 22 - 23 22 - 23 22 - 23
Cutting
ROCUT 110 ROCUT 160
Suited for: PE, PP, PVC, PEX, PVDF, PB** PE, PP, PVC, PEX, PVDF, PB**
Outer pipe diameter: Ø 32 - 110 mm Ø 110 - 160 mm
Wall thickness: Up to max. 16 mm* Up to max. 16 mm*
Operation mode: Manual Manual
Function: Cutting, chamfering Cutting, chamfering
Page 24 - 25 24 - 25
* not for all materials, dependant on cutting tool

12 ** dependant on cutting tool
Cutting
System overview
Plastic pipe cutters 1

TC 67 PL TC 125 PL TC 168 PL
Working range: Ø 6-67 mm (1/4-2.5/8”) Ø 50-125 mm (2-5”) Ø 110-168 mm (4.3/8-6.5/8“)
Dimensions: 230 x 110 x 40 mm 360 x 180 x 50 mm 390 x 220 x 50 mm
Weight: 700 g 1,600 g 1,700 g
Extras: Internal pipe deburrer, Internal pipe deburrer Internal pipe deburrer
spare cutter wheel
Suitable for: PE, PP, PEX, PB, PE, PP, PEX, PB, PE, PP, PEX, PB,
PVDF-pipes, sound- PVDF-pipes, sound- PVDF-pipes, sound-
isolated drain pipes isolated drain pipes isolated drain pipes
Page 26 26 26
Pipe saws
UNIVERSAL ROTIGER VARIO ELECTRONIC
Working range: –
Power: 1,600 W (230V)
Speed: 1,000 - 2,800 rpm
Weight: 3.7 kg
Hub: 26 mm
Dimensions: 440 x 120 x 80 mm
Saw blade holder: Quick tensioning for universal saw blades
Extras: -
Page 30
13
Cutting
1 TUBE CUTTER 35 / 42 Pro
DURAMAG
Proven pipe cutter for the precise cutting of pipes HI-Tec magnesium body
Ø 6 - 42 mm (1/4 - 1.5/8”)
Product profile
APPLICATION AREA KEY FEATURES
TC 35 / TC 42 n Optimal for confined spaces
For copper, brass, aluminium, thin-walled steel pipes n Quick adjustment of the working area
TC 35 Ø 6 - 35 mm / TC 42 Ø 6 - 42 mm n Spare cutter wheel in handle
TC 35 MLP / TC 42 Pro MLP n Cuts near to flares are possible
PE, PP, PVDF, plastic-coated pipes, PVC hard plastic pipes n Retractable internal pipe deburrer
TC 35 MLP Ø 6 - 35 mm / TC 42 Pro MLP Ø 6 - 42 mm
n Rugged and robust
TC 35 INOX / TC 42 Pro INOX
Stainless steel pipes
TC 35 INOX Ø 6 - 35 mm / TC 42 INOX Ø 6 - 42 mm
Metal casing with DURAMANT coating:
rugged and robust
Exact telescopic guide
Precise cutting
Cutter wheel
compartment
Spare cutter wheel

always within reach
Easy turning of the

adjustment knob
Quick adjustment of the

working area
Always within reach Two guide rollers with recess
Retractable internal Cuts near to flares

pipe deburrer
For copper and aluminium For MLP pipes For INOX (stainless steel) pipes For refrigeration technology
TC 35 DURAMAG (No. 70027) TC 35 DURAMAG MLP (No. 70108) TC 35 INOX DURAMAG (No. 70055)
TC 42 PRO (No. 70029) TC 42 PRO MLP (No. 70109) TC 42 PRO INOX (No. 70070) TC 35 C (No. 070027C)
14
Cutting
TUBE CUTTER 35 DURAMAG No. 1000002190
1
counter display
Counter display includes six
TUBE CUTTER 35 DURAMAG
Product profile No. 1000002002
KEY FEATURES
n Improved performance
n Higher stability with noticeably less weight
No. 070027DB
Set (No. 1000002190) includes: TUBE CUTTER 35,

6 - 35 mm (No. 70027), cutter wheel for TC 35, Cu-Ms-Al-Fe,
5 pcs. (No. 070017D), ROBOX B2350 (No. 1500002641)
DURAMAG Set (No. 1000002002) includes: TUBE CUTTER 35,
HI-Tec magnesium body
6 - 35 mm (70027), internal and external deburrer 6 - 35 mm
(No. 1500000237), permanent-marker Prepare to Press (No.
1500002640), ROBOX B2350 (No. 1500002641)
The 100% magnesium body is up to
Set (No. 1000002222) includes: TUBE CUTTER TC 35 INOX, 6 - 35
Constant, tight working radius 30% lighter than the previous model! mm, DURAMAG (No. 70055), cutter wheel for TC 35 + TC 30 Pro +
of 123 mm TC 42 XL (No. 070056D), ROBOX B2350 (No. 1500002641)
Model mm inch kg g No.
TUBE CUTTER 35 DURAMAG (Cu, brass, Al, thin-walled pipe) 6 - 35 1/4” - 1.3/8” 255 4 70027
TUBE CUTTER 35 + cutter wheel set, ROBOX 6 - 35 1/4” - 1.3/8” 360 1 1000002190 *
Handtool set prepare to press 6 - 35 1/4” - 1.3/8” 460 1 1000002002
TUBE CUTTER 35 DURAMAG counter display (6 pcs.) 6 - 35 1/4” - 1.3/8” 1,700 1 070027DB
TUBE CUTTER 35 C (for refrigeration) 6 - 35 1/4” - 1.3/8” 470 4 070027C
TUBE CUTTER 35 DURAMAG MLP 6 - 35 1/4” - 1.3/8” 255 4 70108
TUBE CUTTER 35 PRO INOX DURAMAG (stainless steel) 6 - 35 1/4” - 1.3/8” 255 4 70055
TUBE CUTTER 35 INOX + cutter wheel set, ROBOX 6 - 35 1/4” - 1.3/8” 500 1 1000002222 *
TUBE CUTTER 42 PRO (Cu, brass, thin-walled steel pipe) 6 - 42 1/4” - 1.5/8” 550 4 70029
TUBE CUTTER 42 PRO MLP 6 - 42 1/4” - 1.5/8” 550 1 70109
TUBE CUTTER 42 PRO PVC 6 - 42 1/4” - 1.5/8” 550 4 70072
TUBE CUTTER 42 PRO INOX (stainless steel) 6 - 42 1/4” - 1.5/8” 550 1 70070
* ROBOX system p. 25
TUBE CUTTER 42 XL Exact guidance Cutter wheel compartment

Pipe cutter for the precise cutting of metal Precise cutting Spare cutter wheel always
pipes Ø 6 - 42 mm (1 / 4 - 1.5 / 8“) within reach
Product profile Robust cutting wheel
APPLICATION AREA 20 x more cuts**
n New cutter wheel: 20 x more cuts**

n Suitable for thin-walled pipes starting at a wall
thickness of 0.5 mm
n Quick adjustment of the pipe diameter by easy
turning of the adjustment knob
n Spare cutter wheel in handle compartment
n Retractable internal pipe deburrer
KEY FEATURES
Application area: For copper, brass, aluminium, stainless steel and
thin-walled steel pipes Ø 6 - 42 mm with a wall
thickness of up to 1.2 mm
Easy turning of the

adjustment knob
** Stainless steel compared to TC 42 Pro
Gap for cuts near to flare Quick adjustment of
the working area
Material-saving
Model kg g No.
Wide bearing surface
TUBE CUTTER 42 XL 500 1 1000001748 For easy and effortless
Spare cutter wheel (5 pcs.) 20 1 070056D cutting
15
Cutting
1 ROTRAC 28 / 42 MINICUT I PRO / II PRO
High-precision pipe cutter, Copper pipe cutter Ø 3 - 22 mm
Ø 3 - 42 mm (1/8 - 1.5/8”) (1/8 - 7/8”)
Ideal for maintenance and repair work!
38 mm
42 mm
1.1/2"
42 mm
42 mm
1.5/8"
Casing made in one cast
Stable and long-lasting No. 70402
No. 70401
KEY FEATURES KEY FEATURES

n Constant working radius n For copper, brass, aluminium, thin-walled steel pipes
n Cast aluminium design n Compact design with small working radius (38 mm and / or
n Protection of the cutter wheel with the rolling stop 1.1/2” I PRO/42 mm and/or 1.5/8” II PRO) allows use in
n Retractable internal deburrer and spare cutter wheel in handle hard-to-reach places
n Effortless pressure control with the large knurled knob
n Protected screw spindle – protection against dirt and jamming
and compact design
n Two guide rollers with recess for cuts near flares
n Monoblock design allows precision

ROTRAC 28 3 - 28 1/8 - 1.1/8” 220 70010 Model mm inch
kg g No.
ROTRAC 42 6 - 42 1/4 - 1.5/8” 255 70011
ROTRAC 28 PLUS chrome, limited edition 220 1000000046 MINICUT I PRO 3 - 16 1/8 - 5/8” 115 4 70401
Spare axle 5 70080 MINICUT II PRO 6 - 22 1/4 - 7/8” 125 4 70402
Spare cutter wheel INOX 2 070007X Spare cutter wheel (5 pcs.) 20 1 070017D
Spare cutter wheel (3 pcs.) for Cu, AI, brass 20 070007D Spare axle 5 1 70041
MINICUT 2000 MINI MAX

Copper pipe cutter Ø 6 - 22 mm Copper pipe cutter Ø 3 - 28 mm
(1/4 - 7/8”) (1/8 - 1.1/8”)
Ergonomic design of body and knob with Ergonomic design of body and knob with
seating surface for the hand during turning seating surface for the hand during turning
58 mm
42 mm
2.1/4"
45 mm
42 mm
1.3/4"
Set (No. 1000002191) includes:

MINICUT I PRO pipe cutter, 3 - 16
mm (No. 70401), MINI MAX pipe
cutter, 3 - 28 mm (No. 70015),
ROBOX B2350 (No. 1500002641)

n For copper, brass, aluminium, thin-walled steel pipes n For copper, brass, aluminium, thin-walled steel pipes
n Compact design with small working radius (45 mm and/or n Compact design with very small working radius (58 mm and /
1.3/4”) allows use in hard-to-reach places or 2.1/4”) allows use in hard-to-reach places
n Effortless pressure control with the large knurled knob and n Effortless pressure control with the large knurled knob
compact design and compact design
n Two guide rollers with recess for cuts near flares n Two guide rollers with recess for cuts near flares

Model mm inch
kg g No. Model mm inch
kg g No.
MINICUT 2000 6 - 22 1/4 - 7/8” 140 4 70105 MINI MAX 3 - 28 1/8 - 1.1/8” 270 4 70015
Spare cutter wheel (5 pcs.) 20 1 070017D MINICUT I PRO + MINI MAX, ROBOX 1000002191*
Spare axle 5 1 70041 Spare cutter wheel (5 pcs.) 20 1 070017D
Spare axle 5 1 70041
16
Cutting
TUBE CUTTER 30 PRO / 50 1
Copper pipe cutter Ø 3 - 50 mm (1/8 - 2”)
KEY FEATURES
n For copper, brass, aluminium, thin-walled steel pipes
n Two guide rollers with recess for cuts near flares
n Retractable internal deburrer and spare cutter wheel in handle
No. 71019

Model mm kg g
inch No. kg
Model g No.
TUBE CUTTER 30 PRO 3 - 30 1/8 -1.3/8” 305 4 71019 Spare cutter wheel (5 Pcs.) 20 1 070017D
TUBE CUTTER 50 12 - 50 1/2 -2” 520 1 70065 Spare axle 5 1 70041
Automatic ratchet telescopic

pipe cutter
Telescopic pipe cutter Ø 6 - 67 mm (1/4 - 2.5/8”)
KEY FEATURES
n For copper, brass, aluminium, thin-walled steel pipes as well
as plastic-coated pipes
n Retractable internal deburrer and spare cutter wheel in handle
n Monoblock design
n Quick adjustment with the ratchet telescopic guide with
automatic spring-driven release
No. 70030
n Self-clamping prevents release due to quick adjustment during
the cutting process
Model mm inch
kg g No. Model mm inch
kg g No.
Size 1 6 - 67 1/4 - 2.5/8” 755 70030 Size 2 50 - 127 2 - 5” 1,850 70142

Size 1 spare deburring blade 5 10 21652 Size 1 spare axle 20 70042
Size 1 spare cutter wheel (5 pcs.) 20 1 070017D Size 1 spare deburrer complete 5 750004100
Size 2 spare cutter wheel (2 pcs.) 20 070057D Size 2 spare axle 5 751004200
Size 2 spare deburring blade 5 10 21652
Chain pipe cutter

For pipes Ø 20 - 100 mm (1 - 4”)
KEY FEATURES
n For copper, brass, aluminium, thin-walled steel pipes as well as
plastic-coated pipes
n Ideal for working in confined spaces, e.g. parallel-running pipes
n Robust chain with 15 mini cutter wheels, two-step adjustment,
chrome-plated with plastic covered handles
Model mm inch
kg g No.
No. 70285
Chain pipe cutter 20 - 100 1 - 4” 575 70285
Spare cutter wheel chain 180 70286
ACCESSORIES
Model No.
Internal / external deburrer, Ø 6 - 35 mm 32 1500000237

GRATFIX 34 21655
UNIGRAT 34 21660
Spare cutter wheels 21
17
Cutting
1 ROSLICE
Copper pipe cutter Ø 12 - 22 mm (1/2 - 1.1/8”)
Ergonomic form
KEY FEATURES
Less space needed, ideal for
hard-to-reach places
Q Quick cutting of copper pipes with less turns
Q No deformation of the pipe: self-clamping and self-alignment
Q Less space required, ideal for hard-to-reach places
Q Reliable hold with the non-slip surface
Self-clamping and self-alignment
Prevents the deformation of the pipe
Non-slip surface
Pipe cutting possible Reliable grip
near the wall
Indicates rotating Model mm/inch No.

kg g
direction
Quick cutting with just ROSLICE 12 mm 240 88812

a few turns ROSLICE 15 mm 230 88815
ROSLICE 18 mm 260 88818
ROSLICE 22 mm 250 88822
ROSLICE 3/4” 240 88832
Spare cutter wheel (5 pcs.) 1/2”, 12 mm 36.3 088840D
Spare cutter wheel (5 pcs.)5/8”- 7/8”, 15 - 22 mm 34.6 088841D
Spare cutter wheel (5 pcs.)1/2”- 3/4”, 18 mm 37.4 088842D
TUBE CUTTER 30 PRO INOX

Stainless steel pipe cutter Ø 3 - 30 mm (1/8 - 1.1/8”)
INOX
for the precise cutting of stainless steel pipes
2 guide rollers with recess KEY FEATURES

Cut near flares
Q Retractable internal deburrer and spare cutter wheel in handle
Q Two guide rollers with recess for cuts near flares
Precise cutting of stainless

Cutter wheel compartment
steel pipes
Spare cutter wheel always
within reach
Internal deburrer
Retractable
TC 30 PRO INOX 3 - 30 1/8 - 1.1/8” 305 1 71085

Spare cutter wheel (5 pcs.) 20 1 070056D
Spare axle 5 1 70041
18
Cutting
TUBE CUTTER INOX 12x ball bearings 1
Ratchet telescopic pipe cutter Ø 6 - 60 mm (1/4 - 2.3/8”) Extremely stable, fast and
INOX
for the precise cutting of stainless steel pipes direct guidance of the pipe
KEY FEATURES
Q Quick adjustment with the ratchet telescopic guide with
automatic spring-driven release
12 x ball bearings!
Easy turning of the

adjustment knob
Quick adjustment of
the working area
TUBE CUTTER INOX 6 - 60 1/4 - 2.3/8” 305 1 70340

Metal casing made
TUBE CUTTER INOX + cutter wheel set, ROBOX 1 1000002192* of aluminium
Spare cutter wheel (2 pcs.) 20 1 70341
Rugged and robust
* ROBOX system p. 25 No. 1000002192
TUBE CUTTER 35 / 42 PRO INOX Set (No. 1000002222) includes: TUBE CUTTER 35 INOX, (No.
70055), cutter wheel f. TC 35 + TC 30 PRO + TC 42 XL, INOX
5 pcs. (No. 070056D), ROBOX B2350 (No. 1500002641)
Proven pipe cutter Ø 6 - 42 mm (1/4 - 1.5/8”) for
the precise cutting of stainless steel pipes
Easy turning of the
KEY FEATURES adjustment knob
n Hardened, special cutter wheel made of high-alloyed steel
Quick adjustment of
n External burr-free cutting the working area
n Stainless steel guide rolls, cuts near flares possible
n Optimum use in tight places
n Quick adjustment of the working area
n Retractable pipe internal deburrer
n Rugged and robust
Model mm inch
kg g No. Model kg g No.
TC 35 INOX 6 - 35 1/4 - 1.3/8” 440 4 70055 Spare cutter wheel (5 pcs.) 20 1 070056D
TUBE CUTTER INOX + cutter wheel set, ROBOX 1 1000002222* Spare deburring blade 10 10 21652
TC 42 PRO INOX 6 - 42 1/4 - 1.5/8” 510 1 70070
Cutter wheel compartment

TUBE CUTTER CSST Spare cutter wheel always
Pipe cutter for the precise cutting of corrugated within reach
INOX pipes Ø 10 - 42 mm (3 / 8“ - 1.5 / 8”)
Easy turning of the adjustment knob
KEY FEATURES Quick adjustment to the pipe diameter
Q Stability provided by two wide rubber rollers
Q Quick adjustment to the pipe diameter
Q Spare cutter wheel in handle compartment
APPLICATION AREA
Corrugated pipes with a wall thickness of up to 0.2 mm
Special cutter wheel
For thin-walled corru-

gated INOX pipes
Guide rollers next to the

Model kg g No.
Wide bearing surface cutter wheel
TUBE CUTTER CSST 42 mm 0.5 1 1000001747 Ideal force distribution Perfect guidance of corrugated
Cutter wheel CSST pipe (5 pcs.) 1 1000002077 while cutting pipes
19
Cutting
1 ENORM 4”
Steel pipe cutter Ø 60 - 115 mm (2 - 4”)
n Wide rollers for secure guiding of cutter wheel on pipe n Long service life with the hardened cutter wheel made of
n Easy pressure control for optimum force transmission onto high-alloyed steel
the pipe n Burr-free cutting allows immediate thread cutting
Thread for handle
Anti-slip surface
Reliable grip
Handle (included in delivery)
Model mm inchkg g No. Model kg g No.
ENORM 4” 60 - 115 2 - 4” 7,105 70060 Spare axle 5 70064

Spare cutter wheel (2 pcs.) 20 070061D
SUPER 1.1/4” and 2” SUPER 1.1/4” and 2” INOX

Stainless steel pipe cutter Ø 10 - 60 mm (1/8 - 2”) Stainless steel pipe cutter Ø 10 - 60 mm (1/8 - 2”)
KEY FEATURES (SUPER/SUPER INOX) KEY FEATURES (SUPER/SUPER INOX)
n Wide rollers for secure guiding of cutter wheel on pipe n Long service life with the hardened cutter wheel made of
n Easy pressure control for optimum force transmission onto high alloy steel
the pipe n Burr-free external cutting allows for immediate thread cutting
Precise cutting of stainless
steel pipes
INOX
Model mm inchkg g No. Model mm inch

kg g No.
SUPER 1.1/4” 10 - 42 1/8 - 1.1/4” 1,040 70040 SUPER 1.1/4” INOX 10 - 42 1/8 - 1.1/4” 1,040 70086
SUPER 2” 10 - 60 1/8 - 2” 2,155 70045 SUPER 2” INOX 10 - 60 1/8 - 2” 2,155 70087
1.1/4” spare cutter wheel (3 pcs.) 20 070046D 1.1/4” spare cutter wheel (2 pcs.) 20 070088D
1.1/4” spare axle 5 701011500 1.1/4” spare axle 5 701011500
2” spare cutter wheel (3 pcs.) 20 070051D 2” spare cutter wheel (2 pcs.) 20 070089D
2” spare axle 5 70053 2” spare axle 5 70053
ACCESSORIES
Model No.

GRATFIX 34 21655
UNIGRAT 34 21660
Spare cutter wheels 21
20
Cutting
Accessories cutting metal, manual
Pipe cutters, cutting wheels and 1
spare parts
Only original ROTHENBERGER cutting wheels made of high-
alloyed hardened steel guarantee an exact, right-angled cut
Sizes Ø mm Spare Deburring

Pipe cutter type Model for Cutting d, L, D Cutting Spare axle Length mm roller blade Application area

pipe - Ø No. wheel No. mm depth No. Thread No. No.
MINICUT I PRO 3 - 16 mm 70401 070017D 4.8 / 5.90 / 18.5 3.0 70041 4.7 / 14 / M3 70023 - Copper pipe (Cu),
MINICUT II PRO 6 - 22 mm 70402 070017D 4.8 / 5.90 / 18.5 3.0 70041 4.7 / 14 / M3 70023 - brass pipe (Ms),
aluminium pipe (Al),
MINICUT 2000 thin-walled
6 - 22 mm 70105 070017D 4.8 / 5.90 / 18.5 3.0 70041 4.7 / 14 / M3 - - steel pipe (Fe),
PVC hard plastic pipe,
MINIMAX 3 - 28 mm 70015 070017D 4.8 / 5.90 / 18.5 3.0 70041 4.7 / 14 / M3 - - plastic-coated pipe
TUBE CUTTER 30 PRO 3 - 30 mm 71019 070017D 4.8 / 5.90 / 18.5 3.0 70041 4.7 / 14 / M3 70067 - Copper pipe (Cu),
brass pipe (Ms),
TUBE CUTTER 35 + 35 C 6 - 35 mm 070027(C) 070017D 4.8 / 5.90 / 18.5 3.0 70041 4.7 / 14 / M3 70067 21652 aluminium pipe (Al),
TUBE CUTTER 42 PRO 6 - 42 mm 70029 070017D 4.8 / 5.90 / 18.5 3.0 70041 4.7 / 14 / M3 70067 21652 thin-walled
steel pipe (Fe),
TUBE CUTTER 35 MLP 6 - 35 mm 70108 070188D 4.8 / 5.90 / 19.3 4.0 70041 4.7 / 14 / M3 70067 21652 PVC hard plastic pipe,
TUBE CUTTER 42 PRO MLP 6 - 42 mm 70109 070188D 4.8 / 5.90 / 19.3 4.0 70041 4.7 / 14 / M3 70067 21652 plastic-coated pipe
TUBE CUTTER 50 12 - 50 mm 70065 070017D 4.8 / 5.90 / 18.5 3.0 70006 4.7 / 16 / M4 - - Multi-layered composite pipe
70030 070017D 4.8 / 5.90 / 18.5 3.0 70042 4.7 / 16 / M4 - 21652 Cu, Ms, Al, Fe thin-walled
AUTOMATIC Size 1 70031 70042 - 21652 PE, PP, VPE, PB and PVDF pipes
6 - 67 mm 070028D 4.8 / 5.90 / 23.6 7.0 4.7 / 16 / M4
pipe cutter
70142 070057D 8.0 / 14.0 / 29.0 7.0 751004200 7.9 /23.5/1/4” - 21652 thin-walled Cu, Ms, Al, Fe
055054D 8.0 / 13.0 / 40.0 13.0 751004200 7.9 /23.5/1/4” - 21652 PE, PP, VPE, PB and PVDF pipes
Size 2 50 - 127 mm
055053D 8.0 / 13.0 / 30.5 8.0 751004200 7.9 /23.5/1/4” - 21652 thin-walled PP pipes
70032
055074D 8.0 / 11.0 / 45.0 16.0 751004200 7.9 /23.5/1/4” - 21652 PE, PP, VPE, PB and PVDF pipes
Size 3 055074D 8.0 / 11.0 / 45.0 16.0 751004200 7.9 /23.5/1/4” - 21652 PE, PP, VPE, PB and PVDF pipes
100 - 168 mm 70033
055053D 8.0 / 11.0 / 30.5 8.6 751004200 7.9 /23.5/1/4” - 21652 thin-walled PP pipes
TUBE CUTTER 28 3 - 28 mm 70010 070007D 4.8 / 3.0 / 16.0 2.5 70080 + 70081 4.7 / 9 / SR 80679 - Cu, Ms, Al, Fe thin-walled
TUBE CUTTER 42 3 - 42 mm 70011 070007D 4.8 / 3.0 / 16.0 2.5 70080 + 70081 4.7 / 9 / SR 80679 - Cu, Ms, Al, Fe thin-walled
TUBE CUTTER 42 PRO PVC 6 - 42 mm 70072 070028D 4.8 / 5.90 / 23.6 7.0 70041 4.7 / 14 / M3 70067 - PE, PP, VPE, PB and PVDF pipes
Steel pipe cutter 1/8” - 1.1/4” 70040 070046D 7.5 / 14.0 / 25.7 5.5 701011500 7.4 / 30 / - 70047 - Steel pipe (Fe)
SUPER 1/8” - 2” 70045 070051D 9.0 / 17.0 / 31.5 6.0 70053 8.9 / 35 / - 70052 - Steel pipe (Fe)
Steel pipe cutter 2” - 4” 70060 070061D 9.7 / 20.0 / 41.0 8.0 70064 9.4 / 52 / - 70063 - Steel pipe (Fe)
ENORM
TUBE CUTTER 30 PRO INOX 3 - 30 mm 71085 070056D 4.8 / 5.9 / 18.5 5.5 70041 4.7 / 14 / M3 70068 - Stainless steel pipe
TUBE CUTTER INOX 10 - 54 mm 70340 70341 5.0 / 21.0 / 30.0 3.5 753000700 4.7 / 14 / M3 70068 21652 Stainless steel pipe
TUBE CUTTER 35 INOX 6 - 35 mm 70055 070056D 4.8 / 5.90 / 18.5 4.0 70041 4.7 / 14 / M3 70068 21652 Stainless steel pipe
TUBE CUTTER 42 PRO INOX 6 - 42 mm 70070 070056D 4.8 / 5.90 / 18.5 4.0 70041 4.7 / 14 / M3 70068 21652 Stainless steel pipe
SUPER INOX 1/8” - 1.1/4” 70086 070088D 4.8 / 5.90 / 19.3 4.0 701011500 7.4 / 30 / - 70047 - Stainless steel pipe
1/8” - 2” 70087 070089D 9.0 / 19.0 / 31.5 7.0 70053 8.9 / 35 / - 70052 - Stainless steel pipe
Chain pipe cutter 100 mm 70285 - 4.0 / 3.80 / 17.8 3.0 - - Spare chain 70286 Cu, Ms, Al, Fe thin-walled
21
Cutting
1 ROCUT
Plastic pipe shears up to Ø 75 mm (3”)
The ROTHENBERGER plastic pipe shears for highest quality require-
ments. Knife blades deliver clean and straight cuts on pipe diameters
up to 75 mm of plastic types currently used in installations. The
aluminium construction makes for precise operation and long life.
Product profile
For precise cutting of PP, PE, PEX, PB, PVC, PVDF and MLP pipes up Q Secure grip with the rubberised handles
to Ø 75 mm Q Shear arms lockable in transport position
KEY FEATURES TECHNICAL DATA
Q Minimum effort during cutting ROCUT Professional: ROCUT Standard:
Q Precise right-angled cuts TC 42: Ø 0 - 42 mm TC 26: Ø 0 - 26 mm
Q Pin-point precision without deformation TC 50: Ø 0 - 50 mm TC 32: Ø 0 - 32 mm
Q Precise pressure transfer and guided cutter feed TC 63: Ø 0 - 63 mm PS 35: Ø 6 - 35 mm
Q Automatic, controlled opening of the blade at the push TC 75: Ø 0 - 75 mm PS 26/42: Ø 6 - 42 mm
of a button
Release lever Rubberised handle

Automatic, controlled opening of Secure grip
the blade at the push of a button
Structural unit of shaft and blade
Precise pressure transfer and

guided cutter feed
Rust-free steel blade

with V-edge
Pinpoint precision
without deformation
Lockable lever
Shear arms lockable

in transport position
No. 52000
Ideally meshed cutting curve
Minimum effort during cutting
Wide pipe support
Precise right-angled cuts

ROCUT TC 42, 0 - 42mm (No. 52000),
ROBOX B2650 (No. 1500002763)
22
Cutting
ROCUT TC 50 / TC 75 Professional ROCUT TC 26 / TC 32 1
Plastic pipe shears up to Ø 75 mm (3”) PS 26 / PS 42 S / PS 35 S
Plastic pipe shears up to Ø 42 mm (1.5/8”)
(TC 32 for multi-layer composite pipes MLP)
No. 52010
No. 52005
No. 52015
No. 52040
ROCUT TC 63 Professional
Plastic pipe shears up to Ø 63 mm (2.1/2”)
(TC 63 Professional for PVC pipes)
L FO
EA
ID
of PVC-pipes
CU
G
TTIN
No. 55005 / No. 55015
ROCUT TC 26 0 - 26 0 - 1” 370 4 52005

ROCUT TC 26, counter display (10 pcs.) 0 - 26 0 - 1” 3,700 1 052005D
ROCUT TC 32 0 - 32 0 - 1.1/4” 220 4 52040
ROCUT PS 35 6 - 35 1/4 - 1.3/8” 740 4 55005
ROCUT PS 26 / 42 S, adjustable 6 - 42 1/4 - 1.5/8” 950 1 55015
ROCUT TC 42 Professional 0 - 42 0 - 1.5/8” 447 4 52000
ROCUT TC 42 Professional, ROBOX 0 - 42 0 - 1.5/8“ 590 1 1000002193 *
ROCUT TC 50 Professional 0 - 50 0 - 2” 600 6 52010
ROCUT TC 63 Professional 0 - 63 0 - 2.1/2” 700 6 52030
ROCUT TC 75 Professional 0 - 75 0 - 3” 1,600 1 52015
ACCESSORIES
No. 52041 No. 55006 No. 55007 No. 52042 No. 52011 No. 52031 No. 52016
Model mm inch kg g
No.
Spare stainless steel blade for TC 32 0 - 32 0 - 1.1/4” 120 1 52041

Spare stainless steel blade for PS 35 S 6 - 35 1/4 - 1.3/8” 30 1 55006
Spare stainless steel blade for PS 26 / 42 S 6 - 42 1/4 - 1.5/8” 60 1 55007
Spare stainless steel blade for TC 42 Professional 0 - 42 0 - 1.5/8” 120 1 52042
Spare stainless steel blade for TC 50 Professional 0 - 50 0 - 2” 120 1 52011
Spare stainless steel blade for TC 63 Professional 0 - 63 0 - 2.1/2” 130 1 52031
Spare stainless steel blade for TC 75 Professional 0 - 75 0 - 3” 190 6 52016
23
Cutting
1 ROCUT 110 / ROCUT 160
Cutting and chamfering tool for right-angled cutting
and chamfering (15°), Ø 32 - 160 mm
Product profile
Suitable for thin and thick-walled PVC, PE, PP, PEX, PB and PVDF Q Uniform chamfering of the entire pipe circumference
pipes, as well as sound-insulated drain pipes. Utmost precision in Q Continuously adjustable pipe clamping pressure
a single operation Q Integrated internal deburrer is stored in the handle
KEY FEATURES Q Pipe cutting also possible without chamfering, as cutter blade
shaft can be mounted with 180° offset
Q Only one tool required for cutting, chamfering and deburring
Q Extremely long service life with optimum cutting geometry TECHNICAL DATA
Q Special accessories for PE, PP, PEX, PB and sound-insulated ROCUT 110: Ø 32 - 110 mm
pipes ROCUT 160: Ø 110 - 160 mm
No. 55035
Set (No. 55035) includes: ROCUT 110 (No. 55020), internal deburrer (No. 55018),
2 clamping set 50 and 75mm, cutter blade shaft with automatic copying and
HM cutter blade inserts 7,5mm (No. 54960), ROCASE inlay (No. 1300005864), ROCASE
4414 red w/o inlay (No. 1300003541)
No. 55063
Set (No. 55063) includes: ROCUT 160 (No. 55030), internal deburrer (No. 55018),
2 clamping sets, cutter blade shaft with automatic copying and, HM cutter blade
insert 12,5mm (No. 55019), ROCASE inlay (No. 1300005864), ROCASE 4414 red w/o
inlay (No. 1300003541)
ROCUT 110 with cutter wheel (No.

Handheld operation Clamping in a parallel vice ROCUT 160 with cutter blade 54950) (special accessories)
Model Working range Ø mm

kg g No. Model Working range Ø mm
kg g No.
ROCUT 110 set 50, 75, 110 3.9 55035 ROCUT 160 set 110, 125, 160 5.6 55063
ACCESSORIES
Model kg g No.
Cutter blade for internal deburrer 10 10 21652

ROCASE inlay 377 1300005864
ROCASE 4414 red w/o inlay 1,300 1300003541
Internal deburrer with blade 150 55018
You‘ll find clamping jaw sets on 25
24
Cutting
ROCUT 110 1
Basic unit Ø 32 - 110 mm
For use with clamping sets Ø 32 - 100 mm, without internal deburrer,
with standard cutter blade shaft and cutter blade (No. 55029)
Model mm kg g No.
No. 55020
Basic unit ROCUT 110 110 2,450 55020
ROCUT 110 with Clamping set* 100 110 55048
cutter wheel (No. 54950) Clamping set* 90 150 55021
(special accessories)
Clamping set* 80 170 55047
*Clamping set (1 set = 2 semi-circular segments)
ROCUT 160
Basic unit Ø 110 - 160 mm
Cutter blade shaft with automatic copying and cutter blade
(No. 55019), for use with clamping sets Ø 110 - 140 mm,
without internal deburrer
ROCUT 160 with
cutter blade
Model mm kg g No.
No. 55030
Basic unit ROCUT 160 160 3,450 55030
*Clamping set (1 set = 2 semi-circular segments)
HM cutter clade inserts

ROCUT 110 and ROCUT 160
No. 54960 No. 54961

With automatic Model Cutting depthkgmm g No.
copying
Cutter blade shaft with 7.5 110 54960
Automatic copying and HM cutter blade inserts
Automatic copying and HM cutter blade inserts
Spare HM cutter blade insert for 7.5 10 55029
Cutting and chamfering 15°
No. 55019
Spare HM cutter blade insert for 12.5 20 55019
No. 55029
Cutting and chamfering 15°
Cutter wheels
ROCUT 110 and ROCUT 160
No. 54950
Model Cutting depthkgmm g No.

Cutter wheel (No. 55074)
Spare cutter wheels (2 pcs.) 8.6 10 055053D
Spare cutter wheels (3 pcs.) 13.0 20 055054D
No. 055053D No. 055054D No. 055074D Spare cutter wheels (2 pcs.) 16.0 20 055074D
25
Cutting
1 TUBE CUTTER 67 / 125 / 168
PL Automatic
Telescopic ratchet pipe cutter
Ø 6 - 168 mm (1/4 - 6.5/8”)
Product profile
KEY FEATURES
APPLICATION AREA
Q aximum strength with the monoblock aluminium
M
For precise cutting of PP, PE, PEX, PB and PVDF pipes as well as
construction
sound-insulated drain pipes
Q Optimum, fatigue-free operation with the ergonomically
optimised metal handle
Q Fast adjustment to the outer tube diameter with the
telescopic ratchet guide
Q Fast opening with automatic retraction
Q Internal pipe deburrer retracts into cutter body
Q Hardened, specially sharpened cutter wheels
TECHNICAL DATA
TC 67 PL: 6 - 67 mm 1/4 - 2.5/8”
TC 125 PL: 50 - 125 mm 2 - 5”
TC 168 PL: 110 - 168 mm 4.3/8“ - 6.5/8”
No. 70033
Removable
internal pipe
deburrer
Cutting-
Model mm inch depth kg g No.
TC 67 PL 6 - 67 1/4 - 2.5/8” 7.0 0.7 4 70031

TC 125 PL 50 - 125 2 - 5” 13.0 1.6 1 70032
TC 168 PL 110 - 168 4 - 6.5/8” 16.0 1.7 1 70033
TC 67 PL, counter display (4 pcs.) 1 070031D
Cutting wheels, spare parts 21
No. 070031D
Jacket pipe cutter

For cutting of grooved plastic protective pipe
(corrugated hose) up to 32 mm
KEY FEATURES
Q Ideal tool for the removal of the protective hose on pipes
Q Very robust
Q Simple and precise use
Q Saves time in comparison to conventional use of a blade
Model mm No.
Jacket pipe cutter 0 - 32 mm 21500

Spare blade ROCUT PPD 21505
26
Cutting
TUBE CUTTER 35 MLP / 42 PRO MLP / 1
42 PRO PVC
Telescopic pipe cutter Ø 6 - 42 mm (1/4 - 1.5/8”)
Product profile
APPLICATION AREA TECHNICAL DATA
TUBE CUTTER 35 MLP and 42 PRO MLP for multi-layer TC 35 MLP: 6 - 35 mm 1/4 - 1.3/8”
composite pipes TUBE CUTTER 42 PRO PVC for PVC pipes TC 42 PRO MLP: 6 - 42 mm 1/4 - 1.5/8”
KEY FEATURES TC 42 PRO PVC: 6 - 42 mm 1/4 - 1.5/8”
Q S pace-saving work, also in confined spaces, uniform, small
working radius of 123 mm
Q Right-angled and burr-free cutting with precise telescopic
guidance
Q Fast and simple adjustment of the working range due to the
feed being synchronised with the feeder rotation
Q Optimum, fatigue-free operation with the optimised
ergonomic handle
Q Only one tool for cutting and deburring due to integrated,
retractable internal pipe deburrer
Q Spare cutter wheel in the handle
No. 70108

Model mm inchkg g No. Model mm inchkg g No.
TC 35 MLP 6 - 35 1/4 - 1.3/8” 440 4 70108 TC 42 PRO MLP 6 - 42 1/4 - 1.5/8” 510 1 70109
Spare cutter wheel TC 35/42 MLP (5 pcs.) 19 1 070188D TC 42 PRO PVC 6 - 42 1/4 - 1.5/8” 510 4 70072
Spare cutter wheel TC 42 PVC (3 pcs.) 10 070028D
27
Cutting
Sawing, manual
1 ROBO Super ROBO Mini
Safety saw frame Small saw frame
n inimizes risks: safety handle with exact guidance
M n Handle with ergonomic form enables powerful sawing in
n Room for spare blades in holder tight spaces
n Optimum saw blade tensioning: quick tensioning device with n Large dimension tightening screw
fine adjustment integrated in handle
n Ideal for cutting in confined spaces: 90° rotatable
Model Clamping width mm

kg g No. Model Clamping width mm
kg g No.
ROBO Super saw frame 300 680 71206 ROBO Mini 150 160 71222
including saw blade HSSE 4 Plus (No. 71213) including UNIVERSAL saw blade (No. 71217)
Metal saw frame UNI small saw PUK

n Solid design with robust holder Q F or sawing all materials, small and handy, good cutting
n With cross-slotted squared clamping elements performance
n Reliable captive blade holding pin
n Firm wooden handle Cross-slotted
squared clamping piece
Model Clamping width kg

mm g No.
PUK static, 150 100 842100

with UNIVERSAL saw blade
PUK adjustable, 150 140 71215
Model Clamping widthkgmm g No. with UNIVERSAL saw blade (w. App.)
UNIVERSAL saw blade for metal 150 (32 TPI) 20 12 71217
Metal saw frame without saw blade 300 530 300013 Saw blade for wood 150 (14 TPI) 20 12 71216
HSSE 4 Plus
Bimetal hand saw blade
Highly flexible spring band steel with fused HSSE cutter
n Highest flexibility with extremely hard teeth
n Hardness approx. 65 HRC: Average service life 4 times longer
n Risk of breakage significantly reduced even under extreme
operational demands
n Precise cutting with individual
Without With tooth setting
individual tooth setting individual tooth setting
Hand saw blades with single offset teeth optimally cut the hand saw
blade free. Jamming in the workpiece is prevented. Therefore, the Model mm TPI kg g No.
working rhythm is maintained, less effort is needed and there is a
higher cutting performance. HSSE 4 Plus 300 24 20 100 71213
28
Cutting
Sawing, electric
PORTACUT 185 BSR / BSP
1)
1
Light, precise building-site and workshop band saw
up to Ø 180 mm
KEY FEATURES
n For quick and precise angled cutting of steel pipes, plastic pipes,
profiles and solid materials
n High torque with the 420 W induction motor
n Automatic shut-off and overload protection as safety features
n Preserves saw blade life with the 4-way adjustable
cutting pressure
PORTACUT 185 BSR
n With safety chain quick-grip system
PORTACUT 185 BSP
Q With parallel vice for clean, exact cuts and mitred cuts
up to 45°
Fig. Similar
PORTACUT 185 BSP
Fig. Similar
PORTACUT 185 BSR
Sets include: PORTACUT 185 BSR and/or BSP, 2 band saw blades HSS bimetal 14 TPI
(No. 56605) Cutting power Straight Cuts 45° Cuts
Machine Type O mm mm O mm mm
Model kg g230 V 185 BSR 180 150 – –
PORTACUT 185 BSR 43 56710 185 BSP 180 150 85 75
PORTACUT 185 BSP 49 56711
Band saw blades for PORTACUT 185 BSR / BSP
for pipes and profiles

Dimensions mm TPI Material Steel INOX kg g No.
1,640 x 13 x 0.65 14 SS starting from 6.1 mm - 100 56604

1,640 x 13 x 0.65 14 bimetal starting from 6.1 mm from 2.0 mm 100 56605
1,640 x 13 x 0.65 18 bimetal up to 3.6 mm to 1.6 mm 100 56608
1)
Cutting
Sawing, electric
1 Universal ROTIGER VARIO Electronic 1)
Universal electronic saw

Universal electronic saw for the sanitary and heating technology
professional for installations or repair work
Product profile
n P OWER FEED SYSTEM for a consistent cutting speed (while Performance: 1,600 W with 230 V
idling as well as during use), less wear of the saw blades and Speed: 1,000 - 2,800 rpm (adjustable with wheel)
longer motor life Weight: 3.7 kg
n Ideal for free-hand cutting of wood (even with nails), steel, Distance: 26 mm
stainless steel, cast iron, steel plate
n Continuously adjustable speed regulation
Saw blade attachment: Quick tensioning for universal saw blades
Carbon brush Adjusting wheel
Simple exchange with Simple speed adjustment

the exterior screw joint for various uses
Quick tensioning for saw blades
Very robust turning / tensioning lock
Double insulation
Better protection against moisture Ergonomic D-handle
Fits perfectly in the hand

during sawing
Adjustable supporting shoe
Secure guidance of the saw
Universal-shaft attachment Working in confined spaces
Set (No. 50301) includes: Universal ROTIGER VARIO Electronic,

5 x HSS bimetal saw blades
Model kg g 230 V
UNIVERSAL ROTIGER VARIO Electronic 7.0 50301 Fig. Universal ROTIGER VARIO Electronic
1)
30 RO SERVICE+ only valid in participating countries
Cutting
Saw blades
UNIVERSAL HSS bimetal / For 1/2” universal seating, also suitable for Flex, Bosch, B&D, 1
Skil, Hitachi, Makita, Ridgid, Roller, Rems!
TCT TIGER SAW BLADES
Cuttable L x W x thickness
materials Material mm TPI Reference No.
HSS bimetal (5 pcs.) 150 x 20 x 0.9 24 L S 922 AF 865784
HSS bimetal (5 pcs.) 150 x 20 x 0.9 18 L S 922 EF 865785
HSS bimetal (5 pcs.) 150 x 20 x 0.9 14 L S 922 BF 865786
HSS bimetal (5 pcs.) 200 x 20 x 0.9 18 L S 1022 EF 865787
HSS bimetal (5 pcs.) 200 x 20 x 0.9 14 L S 1022 BF 865788
HSS bimetal (5 pcs.) 300 x 20 x 0.9 10 - 14 L S 1222 VF 865789
Guss
TCT coated (5 pcs.) 225 x 20 x 1.5 30 grit L S 1130 RF 865793
HSS bimetal
Special saw blades with U-shaft
Suitable ROTHENBERGER ROTIGER VARIO for quick and exact, right-angle sawing of steel pipes up to 4” with chain pipe clamp
(absolutely necessary)
materials Material mm TPI Reference No.
HSS bimetal (5 pcs.) 140 x 25 x 1.6 8 U S 920 CF 865795
HSS bimetal (5 pcs.) 200 x 25 x 1.6 8 U S 1120 CF 865796
HSS bimetal (5 pcs.) 150 x 25 x 1.0 10 - 14 U 865798
HSS bimetal (5 pcs.) 200 x 25 x 1.0 10 - 14 U 865799
Special pipe saw blades

For exact, right-angle sawing with chain pipe clamp (absolutely necessary), extra strong and warp resistant guidance for straight cuts and long
operational life
materials Material mm TPI No.
HSS 140 x 25 x 1.6 8 L 50260

HSS 200 x 25 x 1.6 8 L 50261
HSS 290 x 25 x 1.6 6-8 L 50263
HSS-E 140 x 25 x 1.6 14 L 50264
HSS-E 200 x 25 x 1.6 8 L 50265
HSS 200 x 25 x 1.6 6-8 L 50266
31
Cutting
1 Universal internal and external deburrer
Quick and easy deburring Ø 4 - 54 mm (1/8 - 2”)
For copper, steel and stainless steel pipes, with polished cutting blade made
of hardened special steel; smooth running
No. 11006
No. 1500000237
No. 1500000236

Model mm kg
inch g No.
Internal and external deburrer for copper and plastic 4 - 36 1/8 - 1.3/8” 30 11006
Internal and external deburrer for copper and INOX (stainless steel) 6 - 35 1/4 - 1.3/8” 100 1500000237
Internal and external deburrer for copper and INOX (stainless steel) 10 - 54 1/2 - 2” 390 1500000236
32
Cutting
Deburrer adaptor I / II 1
Adaptor for the use of the internal and external
Best deburring results
deburring with portable screwdriver or drill at low speed, 800 rpm
at the most!
Product profile
KEY FEATURES
n User-friendly solution for deburring pipes ”internal
and external”
n Saves time
n Precise, burr-free deburring without effort
No. 11044
Drive shaft
F or the deburring with portable

screwdriver or drill
No. 11045
Model kg g No.
Deburrer adaptor I for No. 1500000237 160 11044

Deburrer adaptor II for No. 1500000236 280 11045
33
Cutting
1 GRATFIX HSS / UNIGRAT Ideal for deburring of edges, pipes and steel,
Deburrer aluminium, brass, copper sheets, cast iron and
plastic plates!
KEY FEATURES
n Replaceable blades
n GRATFIX with plastic cartridge grip
n Grip recess is raised at the end and prevents the tool from slipping
out of users‘ hands
n One-handed use with the retractable locking head
n Offset surfaces provide a good torque
n Pluggable handle ends for the storage of associated blades
UNIGRAT (No. 21660)
GRATFIX HSS (No. 21655)
Nr. 1 (No. 21652)
Model kg g No.
UNIGRAT with HSS deburring blade 30 10 21660

GRATFIX with deburring blade No. 1 50 21655
GRATFIX with deburring blade No. 1 - 2 - 3 80 21651
HSS deburring blade No. 1 Universal 10 10 21652
34
Cutting
ROGRAT MLP deburrer 1
and chamfering tool
For internal and external deburring, chamfering,
calibrating and custom milling of PE-X and
aluminium multi-layer (MLP) pipes of up to Ø 26 mm One tool with three
KEY FEATURES functions: chamfering,
n Internal and external deburrer for PE-X and aluminium multilayer calibrating and deburring!
pipes (MLP) through chamfering to approved standards
n Simultaneous chamfering
n Calibration of the pipe ends through a special guiding pin
Star handle with screw-bit attachment

and quick locking mechanism
High force transmission
True to size guiding and

calibration pin
Increased safety, protects

O-ring from damage
Shock-resistant protective sleeve
Protects from injury
Color coding prevents confusion System optimised chamfer
Fig. ROGRAT MLP deburrer set
ROGRAT MLP system - manual

chamfering attachments
ROGRAT Pipe measurement Color Set includes: carrying case (No. 14005), with basic handle grip (No. 14000) and
system-manual chamfering attachments
type Press system mm code
kg g No.
TH 14 14.0 x 2.00 • 51 14121 Model For size mm kg g No.

TH 16 Henco / MHS 16.0 x 2.00 • 53 14122
TH 18 Giacomini 18.0 x 2.00 • 58 14123 TH Henco/HMS 16 - 20 - 26 760 14250
TH 20 20.0 x 2.00 • 93 14124 Basic handle 250 14000
TH 26 26.0 x 3.00 • 108 14126 System carrying case 250 14005
35
2
36
RODIA 2
diamond core drilling

Characteristics diamond drill bits 40
Hand-operated drilling
Wet drilling machine 41
Hand-operated and stationary drilling
Wet drilling machine 43
Diamond wet and dry drilling system 42 - 47
Diamond drill bits
Wet cutting drill bits for natural stone, soldered 48
Wet and dry cutting drill bits, space welding 49 - 50
Accessories for hand-operated and stationary drilling
Vacuum pump systems 51
Accessories diamond core drilling 51 - 53
Extraction systems
Wet and dry extraction unit 53
37
RODIA diamond core drilling
System overview
Hand-operated drilling
RODIADRILL RODIADRILL 160 RODIADRILL 200 RODIACUT 150,
Ceramic RODIADRILL 160
2
Hand-operated Hand-operated Hand-operated Hand-operated / stationary
Stationary drilling in concrete: Ø 6 - 67 mm Ø 10 - 132 mm Ø 10 - 200 mm Ø 10 - 132 mm
Stationary drilling in masonry: Ø 6 - 67 mm Ø 32 - 162 mm Ø 32 - 225 mm Ø 10 - 152 mm
Hand-operated drilling in concrete: Ø 6 - 35 mm Ø 10 - 82 mm Ø 10 - 82 mm Ø 10 - 82 mm
Hand-operated drilling in masonry: Ø 6 - 67 mm Ø 32 - 162 mm Ø 32 - 250 mm Ø 32 - 162 mm
Power output: 800 W 1,400 W 2,400 W 1,400 W
Speed transmission: 2-gear 2-gear 3-gear 2-gear
Nominal speed: 3,600 / 6,400 rpm 500 / 1,050 rpm 600 / 1,250 / 3,200 rpm 500 / 1,050 rpm
Torque: 4 / 7 Nm 55 / 27 Nm 71 / 34 / 17 Nm 55 / 27 Nm
Weight: 3.4 kg 6.7 kg 7.2 kg 16.7 kg
Page 41 42 - 43 42 - 43 42 - 43
Drill bits
High SPEED Plus-natural stone* DX- High SPEED Plus* SPEED STAR DX*
Connection: G 1/2” G 1/2”, 1.1/4” UNC G 1/2”, 1.1/4” UNC
Drill bit diameter: Ø 6 - 67 mm Ø 20 - 300 mm Ø 10 - 500 mm
Working length: up to Ø 10 mm = 50 mm G 1/2”, 400 mm working length G 1/2”, 400 mm working length
from Ø 12 mm = 120 mm 1.1/4” UNC, 430 mm working length 1.1/4” UNC, 430 mm working length
Application: wet wet and dry wet and dry
Tiles:   
Granite:   
Marble:   
Brick:  ** **
Masonry:  ** **
Lime-sand brick:  ** **
Asphalt:  ** **
Screed:   
Concrete:   
Reinforced concrete:   
Page 48 49 50
* Special lengths and diameters on request, ** Suitable for dry drilling,  Ideally suited  Very suitable  Suitable
38
System overview
Stationary drilling
RODIACUT 150, RODIACUT 250, RODIACUT 250, RODIACUT 400 PRO,
RODIADRILL 200 RODIADRILL 200 RODIADRILL 500 RODIADRILL 500
2

Hand-operated / stationary Hand-operated / stationary Stationary Stationary
Stationary drilling in concrete: Ø 10 - 152 mm Ø 10 - 200 mm Ø 32 - 250 mm Ø 32 - 400* (500) mm
Stationary drilling in masonry: Ø 10 - 152 mm Ø 32 - 225 mm Ø 32 - 250 mm Ø 32 - 400* (500) mm
Hand-operated drilling in concrete: Ø 10 - 82 mm Ø 10 - 82 mm
Hand-operated drilling in masonry: Ø 32 - 250 mm Ø 32 - 250 mm
Power output: 2,400 W 2,400 W 3,000 W 3,000 W
Speed transmission: 3-gear 3-gear 3-gear 3-gear
Nominal speed: 600 / 1,250 / 3,200 rpm 600 / 1,250 / 3,200 rpm 215 / 430 / 785 rpm 215 / 430 / 785 rpm
Torque: 71 / 34 / 17 Nm 71 / 34 / 17 Nm 185 / 107 / 55 Nm 185 / 107 / 55 Nm
Weight: 17.2 kg 25.2 kg 30.1 kg 39.8 kg
Page 42 - 43 44 - 45 44 - 45 46 - 47
* Drilling range with distance plate expandable up to 500 mm
39
Characteristics diamond drill bits
Space welding PRISMACUT
Cold welding process according to cutting-edge Four drill nodules on the diamond segment improve
bonding technology: Due to the ”neutral zone” the the drill behaviour and at the same time provides
entire diamond segment is used without waste. optimum water cooling.
2 SPACE WELDING PRISMACUT
Wet and dry drilling with new technology: n The exceptional segment positioning offers optimum free punch
n The innovative high-performance drill bit DURAMANT PRO size and an excellent cutting speed
and SPEED STAR DX is produced using cutting-edge welding n The ”PRISMACUT” centre drill nodule is characterised by a
technology better drill behaviour and preservation of the diamond segment
n Because of the neutral zone, the ”Space welding” cold n PRISMACUT guarantees direct water cooling of the diamond
welding process guarantees the optimum use of the complete segments
diamond segments without loss n 15% higher cutting speed with steel reinforcement
n The service life is up to 20% higher compared to lasered and
soldered drill bits
Space Welding and PRISMACUT drill nodules

PRISMACUT and Space Welding method
(2 welding points)
Overwound supporting pipe

for an exact rotation
Free punch of
the drill bit
Cooling fluid outlet
(water)
Concrete floor, e.g.

Cooling fluid entry
with steel reinforcement
Drill core
Steel reinforcement 9.0 mm high

diamond segment PRISMACUT
spot drilling support
DX High Speed Plus SPEED STAR DX

universal drill bits Space welding wet and dry drill bits
Space welding universal wet and dry drill bits for different diameters in the range of 10 - 500 mm
for Ø 10 - 300 mm
DX-HIGH SPEED PLUS

universal drill bits on SPEED STAR DX
page 47 drill bits on page 48
40
RODIADRILL Ceramic 1)
Ø 67
Hand-operated wet drilling, drill Ø 6 - 67 mm
Ideally suited for HVAC&R, plumbing professionals, tilers, stair
builders, remodelling specialists as well as electricians.
Everywhere where jolt-free operation is necessary and extremely 2
hard materials need to be processed.
Product profile
Hand-operated wet drilling in: 2-speed transmission: 1. gear speed 2. gear speed
(reinforced) concrete Ø 6 - 35 mm, marble, granite, ceramic tiles, Nominal speed: 3,600 rpm 6,400 rpm
masonry, hollow brickwork and glass Ø 6 - 67 mm Drilling range in mm: Ø 25 - 67 Ø 6 - 25
KEY FEATURES Voltage: 230 V
Q For all common G 1/2” drill bits Power input/output: 1,150 W / 800 W
Q Fatigue-free operation with the lightweight Charging rate: 3.6 A
Q Also drills through material combinations (for example tiles + Maximum drilling depth: 400 mm (depending on material)
masonry) without damaging material or surfaces and without Minimum distance to wall: 30 mm from drill hole center
cumbersome tool change Minimum distance to corner: 30 mm from drill hole center
Q ”Aqua-stop button” with quantity adjustment Weight: 3.4 kg
Q Ideal for serial drilling with the external water supply
Q Toolless exchange of the drill bits with the Quick change
system
Q Integrated 1 litre water tank for 4 - 6 drill holes
Integrated 1 litre water tank
Sufficient supply for 4 - 6 drill

holes and can be rotated when
working in confined spaces
Quick change system

drill bit adaptor
Toolless quick change

for G 1/2” drill bits
Connection for external water supply
Ideal solution for serial drillings

”Aqua-stop button” –
water pressure valve
11-part set (No. FF40150) includes: drill motor RODIADRILL Ceramic (No. FF40150), with quantity adjustment
1 high speed plus drill bit each Ø 6 - 8 - 10 mm (No. FF44806, FF44808, FF44810),
3 x quick change adapter (No. FF35751), spanners sizes 24 and 27 (No. FF70024, Perfectly regulated flow
FF70027), hexagonal key (No. 321523), ROCASE 6414 (No. 1300003336), ROCASE of the water quantity
inlay (No. 1300005582)
Model
kg g No.
RODIADRILL Ceramic set 3.4 FF40150
ACCESSORIES
Model No. Model No.
Quick change adaptor FF35751 Water supply hose with ”aqua-stop” FF35302
Pressurized water container 10 l 52 FF35028 HSP Nature stone drill bits 48
Special water supply hose FF35301 Water collection ring, stationary 52 FF35700
1)
omplete terms and conditions at rothenberger.com/roservice
C
RODIACUT 150 / RODIADRILL 160 RODIACUT 150 / RODIADRILL 200
RODIACUT 150 drill stand with combination drill RODIACUT 150 drill stand with combination drill
mounting plate and RODIADRILL 160 drill motor for mounting plate and RODIADRILL 200 drill motor for
drilling Ø 10 - 132 mm (Ø 162 mm) in reinforced concrete drilling Ø 10 - 152 mm (Ø 250 mm) in reinforced concrete
2
Product profile Product profile
APPLICATION AREA APPLICATION AREA
RODIADRILL 160: RODIADRILL 200:
Stationary wet drilling in (reinforced) concrete: Ø 10 - 132 mm Stationary wet drilling in (reinforced) concrete: Ø 10 - 132 mm
Hand-operated wet drilling in (reinforced) concrete: Ø 10 - 82 mm Hand-operated wet drilling in (reinforced) concrete: Ø 10 - 82 mm
Hand-operated dry drilling in masonry: Ø 10 - 162 mm Hand-operated dry drilling in masonry: Ø 10 - 162 mm
TECHNICAL DATA (DRILL STAND)
RODIACUT 150: 3 applications with just one unit
Drilling range: Without water collection ring max. Ø 152 mm
With water collection ring max. Ø 132 mm
Drill motor
adaptor: Ø 60 mm
L x W x H: 280 x 440 x 810 mm
Hub: 480 mm
Weight: 9.7 kg
3 applications with just one unit
Circular level
Quick and exact

alignment of the
drill stand
Hexagon socket screw key 6 mm included
All adjustments with a single tool
Adjustable handle
Quick change of operating

side-drilling, even in
confined spaces
Buckling resistant column

Drill angle adjustment 90° - 45°
Robust and lightweight
Quick, easy, no tools required
42
RODIADRILL 160
1)
Drill motor
TECHNICAL DATA (DRILL MOTOR)

Drill motor: RODIADRILL 160
Threaded adaptor: G 1/2” and 1.1/4” UNC
Power input / output: 2,000 W / 1,400 W
2-speed-transmission: 1. gear 2. gear
Nominal speed: 500 rpm 1,050 rpm
Torque: 55 Nm 27 Nm
Clamping neck: Ø 60 mm
RODIADRILL 200
1)
Drill motor
Set (No. FF34150) includes: Drill stand RODIACUT 150 (No. FF30150),
drill motor RODIADRILL 160 (No. FF40165), tool bag (No. FF70001), spanner SW19
DIN895 (No. FF70019N), spanner SW24 DIN894 (No. FF70024), spanner SW36 DIN894
(No. FF70036), spanner SW41 DIN894 (No. FF70041), concrete fixing set (No. FF35120),
water supply hose + adaptor for Gardena coupling (No. FF35302), hammer drill SDS
Plus 15x160mm (No. 111429), copper ring 1.1/4”(No. FF35190), instruction manual
drill stand RODIACUT 150-250 (No. 1300002467), instruction manual RODIADRILL
160+200 (No. 1300002468), earplugs SaveRave (No.4100000439), rubberized gloves
(No.4100000443), safety goggle HC/AF (No. 4100000441)
Set (No. FF34160) includes: Drill stand RODIACUT 150 (No. FF30150),
(No. FF70036), spanner SW41 DIN894 (No. FF70041), concrete fixing set (No. FF35120),
Plus 15x160mm (No. 111429), copper ring 1.1/4”(No. FF35190), instruction manual drill
stand RODIACUT 150-250 (No. 1300002467), instruction manual RODIADRILL 160+200
TECHNICAL DATA (DRILL MOTOR) (No. 1300002468), earplugs SaveRave (No. 4100000439), rubberized gloves
(No. 4100000443), safety goggle HC/AF (No. 4100000441)
Threaded adaptor: G 1/2” and 1.1/4” UNC Model kg g
No.
3-speed transmission: 1. gear 2. gear 3. gear Drill system RODIACUT 150/ RODIADRILL 160 16.5 FF34150
Nominal speed: 600 rpm 1,250 rpm 3,200 rpm Drill stand RODIACUT 150 9.7 FF30150
Torque: 71 Nm 34 Nm 17 Nm Drill motor RODIADRILL 160 6.8 FF40165
Clamping neck: Ø 60 mm Drill system RODIACUT 150/ RODIADRILL 200 16.9 FF34160
Drill motor RODIADRILL 200 7.2 FF40220
ACCESSORIES
Model No. Model No.
RODIADRILL Ceramic 41 FF40150 RODIA DRY CLEANER 1600 53 FF35144

Pressurized water container 10 l 52 FF35028 Water collection ring, stationary (for No. FF30150) 52 FF35700
Vacuum pump RODIA-VAC 51 FF35200 Drill bits 48 - 50
1)
C
RODIACUT 250 / RODIADRILL 200 RODIACUT 250 / RODIADRILL 500
RODIACUT 250 drill stand with combination drill RODIACUT 250 drill stand with combination drill
mounting plate and RODIADRILL 200 drill motor for mounting plate and RODIADRILL 500 drill motor for
drilling Ø 10 - 200 mm (Ø 250 mm) in reinforced concrete drilling Ø 10 - 250 mm in reinforced concrete
2
APPLICATION AREA APPLICATION AREA
RODIADRILL 200: RODIADRILL 500:
Stationary wet drilling in reinforced concrete: Ø 10 - 200 mm Stationary dry drilling in reinforced concrete: Ø 32 - 250 mm
Stationary dry drilling in masonry: Ø 10 - 225 mm Stationary dry drilling in masonry: Ø 32 - 250 mm
Hand-operated wet drilling in reinforced concrete: Ø 10 - 82 mm
Hand-operated dry drilling in masonry: Ø 10 - 250 mm
TECHNICAL DATA (DRILL STAND)
RODIACUT 250:
Drilling range: Without water collection ring max. Ø 250 mm
With water collection ring max. Ø 225 mm
Drill motor-
adaptor: Clamping neck Ø 60 mm and quick change
recording via dovetail plate
L x W x H: 260 x 510 x 980 mm
Hub: 650 mm Buckling resistant column
Weight: 19.7 kg
Robust and lightweight
Hexagon socket screw key 6 mm included
All adjustments with a single tool
Feed unit with

quick change uptake
Toolless, quick
mounting/demounting
of drill motor
Integrated vacuum plate
Adjustable handle Two mounting options

with just one base plate
Quick change of operating
side-drilling, even in
confined spaces
44
RODIADRILL 200
1)
Drill motor
TECHNICAL DATA (DRILL MOTOR)

3-speed transmission: 1. gear 2. gear 3. gear
Nominal speed: 600 rpm 1,250 rpm 3,200 rpm
Torque: 71 Nm 34 Nm 17 Nm
Clamping neck: Ø 60 mm
RODIADRILL 500
1)
Drill motor
Set (No. FF34200) includes: drill stand RODIACUT 250 (No. FF30250), drill motor
RODIADRILL 200 (No. FF40220), tool bag (No. FF70001), spanner SW19 DIN895 (No.
FF70019N), spanner SW24 DIN894 (No. FF70024), spanner SW36 DIN894 (No. FF70036),
spanner SW41 DIN894 (No. FF70041), concrete fixing-set (No. FF35120), water supply hose
+ adaptor for Gardena coupling (No. FF35302), hammer drill SDS Plus 15x160mm (No.
111429), copper ring 1.1/4“ (No. FF35190), instruction manual drill stand RODIACUT 150-
250 (No. 1300002467), instruction manual RODIADRILL 160+200 (No. 1300002468), earplugs
SaveRave (No. 4100000439), rubberized gloves (No. 4100000443), safety goggle HC/AF
(No. 4100000441)
Set (No. FF34260) includes: drill stand RODIACUT 150 (No. FF30250), drill motor RODIA-
DRILL 500 (No. FF40400), tool bag (No. FF70001), spanner SW19 DIN895 (No. FF70019N),
spanner SW24 DIN894 (No. FF70024), spanner SW32 DIN894 (No. FF70032), spanner SW41
DIN894 (No. FF70041), concrete fixing-set (No. FF35120), water supply hose + adaptor for
Gardena coupling (No. FF35302), hammer drill SDS Plus 15x160mm (No. 111429),
copper ring 1.1/4“ (No. FF35190), instruction manual drill stand RODIACUT 150-250
TECHNICAL DATA (DRILL MOTOR) (No. 1300002467), instruction manual RODIADRILL 500 (No. 1300002469), earplugs
SaveRave (No. 4100000439), rubberized gloves (No. 4100000443), safety goggle HC/AF
Drill motor: RODIADRILL 500 (No. 4100000441)
Power input / output: 4,000 W / 3,000 W Model kg g No.
Nominal speed: 215 rpm 430 rpm 785 rpm Drill system RODIACUT 250/ RODIADRILL 200 21.7 FF34200
Torque: 185 Nm 107 Nm 55 Nm Drill stand RODIACUT 250 14.5 FF30250
Drill motor adaptor: Quick-change recording via Drill motor RODIADRILL 200 7.2 FF40220
dovetail plate Drill system RODIACUT 250/ RODIADRILL 500 31.4 FF34260
Drill motor RODIADRILL 500 12.1 FF40400
ACCESSORIES
Model No. Model No.
RODIADRILL Ceramic 41 FF40150 RODIA DRY CLEANER 1600 53 FF35144

Pressurized water container 10 l 52 FF35028 Water collection ring, stationary (for No. FF30150) 52 FF35700
Vacuum pump RODIA-VAC 51 FF35200 Drill bits 48 - 50
1)
C
Stationary drilling
RODIACUT 400 PRO / RODIADRILL 500
1)
RODIACUT 400 drill stand with dowel plate and

RODIADRILL 500 for drilling Ø 32 - 400 (500)* mm in
reinforced concrete
2
Product profile
APPLICATION AREA TECHNICAL DATA (DRILL STAND)
2 applications in one unit: Drilling range: W/o water collection ring: max. Ø 400 mm
Stationary wet drilling in (reinforced) concrete Ø 32 - 400* mm Optional with distance plate max. Ø 500 mm
Stationary dry drilling in masonry Ø 32 - 400* mm Weight: 28.4 kg
L x W x H: 460 x 260 x 1,100 mm
KEY FEATURES Hub: 680 mm
Q rill angle adjustments from -15° up to +45°, in 2.5° steps
D
adjustable
Q Exchangeable guide rail
4x roll guides
Precise and low vibration

operation, flexible use /
module concept
*Distance plate optional (No. FF35136)
T o enlarge the drill hole diameter

from Ø 400 to 500 mm with
RODIACUT 400 PRO
Drill angle adjustments
Adjustable from -15° up

to +45° in 2.5° steps
Rubber transport wheels
Quick and easy transport on

the building site
1)
Stationary drilling
RODIADRILL 500
Drill motor TECHNICAL DATA (DRILL MOTOR)
Nominal speed: 215 rpm 430 rpm 785 rpm
Torque: 185 Nm 107 Nm 55 Nm
Drill motor adaptor: Dovetail plate
Set (No. FF34500) includes: drill stand RODIACUT 400 PRO (No. FF30030),
(No. FF70032), spanner SW41 DIN894 (No. FF70041), concrete fixing-set (No. FF35120), Model No.
kg g
Plus 15x160mm (No. 111429), copper ring 1.1/4” (No. FF35190), instruction manual drill Drill system RODIACUT 400 PRO / RODIADRILL 500 40.5 FF34500
stand RODIACUT 400 PRO (No. 1300002467), instruction manual RODIADRILL 500 (No.
1300002468), earplugs SaveRave (No. 4100000439), rubberized gloves (No. 4100000443),
Drill stand RODIACUT 400 PRO 28.4 FF30030
safety goggles HC/AF (No. 4100000441) Drill motor RODIADRILL 500 12.1 FF40400
ACCESSORIES
Model No. Model No.
Submersible water pump RODIAPUMP 52 FF35029 Drill bits 48 - 50

Pressurized water container 10 l 52 FF35028 Distance plate 60 mm FF35136
RODIA DRY CLEANER 1600 53 FF35144 Copper rings 1.1/4” 51 FF35190
Mounting articles 51 Extensions 52
47
Diamond-drill bits
High Speed Plus natural stone Suitable for all other drilling
Soldered diamond core wet cutting drill bit systems with G 1/2” and 1.1/4” UNC!
between Ø 6 - 67 mm for extremely hard materials
2 Product profile
Special wet drill bits for drilling in natural stone, granite, Q Drillholes on the seam or edge of material possible with the use
marble, (double) baked brick, masonry, (reinforced) concrete, of diamond rings
glass or hollow brickwork from Ø 6 - 67 mm Q Conventional G 1/2” threaded attachments
Typical areas of application are HVAC&R, plumbing and
electronic installations, old building renovations, laying tile, stairs TECHNICAL DATA
and railing installation, air-conditioning technology, garden and G 1/2” adaptor
landscaping Drill bits Segment Segment dimensions (L x W x H)
KEY FEATURES Ø 6 - 40 mm Ring segments Ring x (1.15 - 2.0) x 9 mm
Ø 45 - 67 mm* 4 - 6 24 x 2.5 x 8 mm
Q E xtremely easy cuts, very long service life through 9 mm high
segments Effective length: Ø 6.3 - 10 mm = 50 mm
Q Suitable for all ROTHENBERGER drilling machines Ø 12 - 67 mm = 120 mm
Q Balanced rotation reduces wear Special length of 300 mm available upon request
Q Drilling even through material combinations possible
*Single segment mounting from Ø 45 mm
9 mm high segments with high

diamond concentration
Extremely easy cutting, very long

service life in granite tiles
Overwound drill bits
Balanced rotation reduces wear

Threaded adaptor G 1/2”
Suitable for all other

ROTHENBERGER drilling
machines
Suitable for
Drilling of the hardest materials Reinf. concrete Marble Granite Green granite
RD 160 Ceramic
Masonry Hollow brickwork Aerated concrete Asphalt
RD 200
Adaptor Adaptor Adaptor Adaptor

Ø mm kg g G 1/2” No. Ø mm kg g G 1/2” No. Ø mm kg g G 1/2” No. Ø mm kg g G 1/2” No.
6.3 0.17 FF44806 15 0.20 FF44815 24 0.22 FF44824 55* 0.65 FF44855
8.3 0.17 FF44808 16 0.20 FF44816 30 0.25 FF44830 60* 0.72 FF44860
10 0.17 FF44810 18 0.21 FF44818 35 0.30 FF44835 67* 0.79 FF44867
12 0.19 FF44812 20 0.22 FF44820 40 0.34 FF44840
14 0.20 FF44814 22 0.22 FF44822 50* 0.60 FF44850 * with single segment mounting
48
Diamond-drill bits
DX High Speed Plus Space Welding and
universal drill bits PRISMACUT
Space welding universal wet and dry drill bits
Ø 20 - 300 mm
2
Product profile
Wet and dry drill bits for drilling in reinforced concrete, asphalt, G 1/2” connection (400 mm effective length)
masonry as well as lime sand brick for Ø 20 - 300 mm Drill bits Segment Segment dimensions (L x W x H)
Typical areas of application are HVAC&R and electronic Ø 20 - 40 mm 1 19.3 x 2.5 x 9 mm
installations, old building renovations, building industry, air- Ø 42 - 62 mm 4 - 6 24.0 x 2.5 x 9 mm
conditioning technology, garden and landscaping
Ø 72 - 92 mm 7 - 8 24.0 x 2.8 x 9 mm
KEY FEATURES Ø 102 - 132 mm 7 - 11 24.0 x 3.3 x 9 mm
Q Extremely easy cutting, safe cut in hand-operated use 1.1/4” UNC connection (430 mm effective length)
Q Faster cutting progress and extremely long service life Ø 30 - 62 mm 1 - 6 24.0 x 2.5 x 9 mm
Q Suitable for all other ROTHENBERGER drilling machines Ø 72 - 92 mm 7 - 8 24.0 x 2.8 x 9 mm
Q Balanced rotation reduces wear Ø 102 - 152 mm 9 - 12 24.0 x 3.3 x 9 mm
Ø 162 - 182 mm 12 - 14 24.0 x 3.8 x 9 mm
Suitable for Ø 200 - 300 mm 14 - 20 24.0 x 4.0 x 9 mm
Special segment mix

Threaded adaptor
G 1/2” and 1.1/4” UNC Quicker drilling progress
and extremely long service life
RD 160* RD 200* ROTHENBERGER
drilling machines
Extremely easy cuts,
safe cuts in hand
operated use
RD 500*
Space welding
We recommend the optional extraction
rotor when using as a dry drill bit Allows wet and dry use
Highest service life and

universal application!
Overwound drill bits
Balanced rotation reduces wear

Marble Masonry
Hollow brickwork Pavement Lime sand brick Reinf. concrete
Adaptor Adaptor
Ø mm kg g 1.1/4” No. Ø mm kg g 1.1/4” No.
30 0.7 FF44030 132 4.6 FF44130

Adaptor Adaptor 40 1.2 FF44040 142 5.0 FF44140
Ø mm kg g G 1/2” No. Ø mm kg g G 1/2” No. 52 1.6 FF44050 152 6.4 FF44150
62 1.9 FF44060 162 7.0 FF44160
20 0.5 FF44620 82 1.6 FF44680 72 2.3 FF44070 172 7.5 FF44170
30 0.6 FF44630 92 1.9 FF44690 82 2.6 FF44080 182 8.0 FF44180
40 0.7 FF44640 102 2.1 FF44700 92 3.0 FF44090 200 9.0 FF44200
52 0.9 FF44650 112 2.4 FF44710 102 3.4 FF44100 220 11.4 FF44220
62 1.2 FF44660 122 2.6 FF44720 112 3.8 FF44110 250 13.6 FF44250
72 1.4 FF44670 132 2.9 FF44730 122 4.2 FF44120 300 19.3 FF44300
Suitable for all other drilling systems with G 1/2” and 1.1/4” UNC!
49
Diamond-drill bits
SPEED STAR DX Space welding and
Space welding wet and dry drill bits between PRISMACUT
Ø 10 - 500 mm
2 Product profile
Wet and dry drill bits for asphalt, masonry as well as natural Drill bits Segment Segment dimensions (L x W x H)
and artificial stone between Ø 10 - 500 mm Ø 10 - 38 mm 1 16 x 3.0 x 7.0 mm
Typical areas of application are HVAC&R, plumbing, old Ø 40 - 48 mm 1- 4 24 x 3.0 x 9.0 mm
building renovations, building industry, air-conditioning Ø 50 - 55 mm 5- 6 24 x 3.5 x 9.0 mm
technology, gardening and landscaping Ø 56 - 72 mm 6- 7 24 x 3.5 x 9.0 mm
KEY FEATURES Ø 75 - 102 mm 7- 8 24 x 3.5 x 9.0 mm
Q Extremely easy cuts, safe cut in hand-operated use Ø 107 - 142 mm 9 - 11 24 x 4.0 x 9.0 mm
Q Balanced rotation reduces wear Ø 142 - 182 mm 11 - 14 24 x 4.0 x 9.0 mm
Q Suitable for all other ROTHENBERGER drilling machines Ø 182 - 250 mm 14 - 16 24 x 4.0 x 9.0 mm
Q Standard lengths 400 / 500 mm, special lengths available Ø 300 - 500 mm 16 - 26 20 x 5.0 x 9.0 mm
on request Connection G 1/2“: Effective length 400 mm
Q Conventional G 1/2” and 1.1/4” UNC threaded adaptors Connection 1.1/4“ UNC: Effective length 430 mm
PRISMACUT
Extremely high Suitable for
For better drill behaviour diamond concentration
Faster drilling progress
RD 160* RD 200*
Special drill bits for asphalt, pavement

as well as special lengths up to 1000 mm
available upon request !
RD 500*
* We recommend the optional extraction
rotor when used as a dry drill bit
Reinf. concrete Marble Asphalt
Threaded adaptor
G 1/2” and 1.1/4” UNC

Overwound drill bits ROTHENBERGER
Balanced rotation reduces wear drilling machines
Adaptor Adaptor Adaptor Adaptor

Ø mm kg g G 1/2” No. Ø mm kg g G 1/2” No. Ø mm kg g 1.1/4” No. Ø mm kg g 1.1/4” No.
10 0.3 FF00610 62 1.2 FF00660 20 0.5 FF00020 112 3.8 FF00110

12 0.4 FF00612 66 1.3 FF00665 25 0.6 FF00025 122 4.2 FF00120
16 0.4 FF00616 72 1.4 FF00670 30 0.7 FF00030 132 4.6 FF00130
18 0.4 FF00618 76 1.5 FF00675 40 1.2 FF00040 142 5.0 FF00140
20 0.5 FF00620 82 1.6 FF00680 46 1.4 FF00045 152 6.4 FF00150
24 0.5 FF00624 92 1.9 FF00690 52 1.6 FF00050 162 7.0 FF00160
25 0.5 FF00625 102 2.1 FF00700 56 1.7 FF00055 200 9.0 FF00200
30 0.6 FF00630 108 2.3 FF00705 66 2.1 FF00065 250 13.6 FF00250
32 0.6 FF00632 112 2.4 FF00710 72 2.3 FF00070 280 17.6 FF00280
38 0.7 FF00638 122 2.6 FF00720 76 2.4 FF00075 300 19.3 FF00300
40 0.7 FF00640 127 2.8 FF00725 92 3.0 FF00090 350 23.6 FF00350
46 0.7 FF00645 132 2.9 FF00730 102 3.4 FF00100 500 39.1 FF00500
52 0.9 FF00650 108 3.6 FF00105
56 1.2 FF00655
Suitable for all other drilling systems with G 1/2“ and 1.1/4“ UNC!
50
Vacuum pump RODIA-VAC 1)
Vacuum-sets
This vacuum pump is suitable for all diamond core drilling
units. An extraction tank prevents the vacuum plate
from loosening quickly during a sudden power failure.
Oil-free vacuum pump with pressure gauge.
No. FF35710
No. FF35740
2
1.1 kW motor power

85% Vacuum
200 l/min extraction volume
Quick clamping column

Toolless and reliable bracing between floor and wall or wall and wall.
Maximum operation range from 1.7 m up to 3.0 m with a load
capacity up to 500 kg with sideway guidance.
No. FF35015
10 l extraction tank
Safety during a
power failure
Model kg g No.
Drill stand can only be Quick clamping column 9.0 FF35015

mounted with a combi- Vacuum pump RODIA-VAC 230 V 20.0 FF35200
Vacuum set for RC 150/170 PRO-C 1.1 FF35710
nation of vacuum plate
Spare foamed rubber for drill base RC 150 etc. 0.1 FF50007
and vacuum set! Vacuum set for RC 250/270 PRO-C 1.1 FF35740
Spare foamed rubber for drill base RC 250 etc. 0.1 FF50008
Concrete / masonry fixing set Special diamond drills for tiles and
Set (No. FF35120) includes: knurled thread rod type G-B 160 mm, screw thread M 12/20 natural stone
mm (No. FF35129), U-washer (No. FF70166), winged nut M 12 (No. FF55150), 25 x dri-
ve-in anchor M 12 (No. FF35122) and drive-in iron (No. FF35128) For use when hammer drills can not do the job. Various material
Set (No. FF35121) includes: knurled thread rod type G-M 280 mm, screw thread M 12/85
combinations, such as tiles on concrete, can be easily drilled
mm (No. FF35130), U-washer (No. FF70166), winged nut M 12 (No. FF55150), hexagonal without damage.
nut M12 (No. FF70167), 5 x Rawl anchor M 12 (reusable) (No. FF35126) and drive-in iron
(No. FF35128)
Special diamond drills
No. FF44815
For tiles and natural stone
No. FF44820
No. FF35120 No. FF35121

SDS-plus hammer drill
Thread interfaces
Between motor connection and drill bit
Model kg g No.
Concrete fixing set 1.90 FF35120

Drive-in anchor concrete M12 0.04 FF35122
Threaded rod, B15 concrete set 0.20 FF35129
No. FF35080 No. FF35091
Threaded rod, B15 masonry 0.30 FF35130
No. FF35095
SDS-plus hammer drill Ø 15 mm, wl. 160 mm 0.16 111429*
Wet drill bit Ø 15 mm, G1/2” 0.20 FF44815
Copper rings 1.1/4“ Masonry fixing set 1.10 FF35121
Levels out the unevenness between Rawl anchor M 12 0.08 FF35126
motor connection and drill bit. Wet drill bit Ø 20 mm, G1/2” 0.22 FF44820
Easy loosening prevents drill bits from G 1/2” outer thread to 1.1/4” UNC outer thread 0.50 FF35080
getting stuck on the driveshaft. 1.1/4” UNC inner thread to G 1/2” inner thread 0.70 FF35095
Adaptor DD-BU to G 1/2”+ 1.1/4” 0.80 FF35092
Adaptor DD-BL/BS/BR to G 1/2”+ 1.1/4” 0.80 FF35093
Copper ring 1.1/4” 0.05 FF35190
* Cordless rotary hammer p. 323
1)
C
Water supply
The sturdy 10 litre pressurized water container made of steel is
perfectly suited for individual drilling. When drilling large diameters
or series drillings, the fully submersible RODIAPUMP enables a
mobile supply of water from buckets or other containers up to a
2 delivery height of 5 meters using a 1” water hose. Manometer
Pressure indicator
2.5 meter hose length

Comfortable water connection
Ideal use for ceiling holes
Quick connection with the GK adaptor
and quick-plug coupling
No. FF35028
Rust-free motor shaft
Prevents the quick

jamming of the rotor
Fine filter
Prevents entry of foreign

materials and protects the
motor shaft No. FF35029
Connection quick plug-in coupling
Drip-free connection even under water

pressure
Model kg g No. Model kg g No.
Water supply hose with Aqua-Stop 0.20 FF35302 Pressurized water container, 10 litre 5.50 FF35028
Water supply hose for RODIADRILL 0.20 FF35301
Water extraction systems Extensions for drill bits

The dirty cooling water is extracted in connection G 1/2” and 1.1/4” UNC
with a wet and dry vacuum (FF35144) n Easy extension of the drilling depth
n High-quality and robust steel design
No. FF35700
No. FF35730
Extensions Extensions
Only for RODIACUT Only for RODIACUT G 1/2” 1.1/4” UNC
202 DWS, 250 and 270 C 131 DWS, 150 and 170 C
Nominal length G 1/2” 1.1/4” UNC

kg g kg g
Model
kg g No. in mm No. No.
Water collection ring, stationary (up to Ø 132 mm) 1.2 FF35700 100 0.40 FF35040 1.00 FF35060
Spare rubber membrane (for FF35700) 0.3 FF55131 200 0.90 FF35045 2.00 FF35065
Water collection ring, stationary (up to Ø 200 mm) 2.5 FF35730 300 1.40 FF35050 3.00 FF35070
Spare rubber membrane (for FF35730) 0.6 FF55201 500 2.40 FF35055 5.10 FF35075
52
Extraction systems
Extraction rotor RODIADUST
Universal adaptor for wet drilling machines for
dust-free dry drilling
Provides optimum extraction results in conjunction with RODIA DRY
CLEANER (No. FF35144) and increases the drilling process, prevents 2
jamming of drill bit and reduces segment wear.
Model kg g No.
Extraction rotor (drill bit 1.1/4“ UNC / motor G 1/2“) 1.90 FF40056
RODIA DRY CLEANER 1600

Wet and dry extraction unit 8
Especially good performance when used with

WALL CUT 6540, RODIADRILL 1800 DRY or other
ROTHENBERGER extraction-friendly system products
Constant extraction power!

Automatic filter-cleaning function!
High cleaning efficiency
2 polyester-filter cassettes with

99.9% dust retention (max. 20 l),
water retention of 15 litres
Separate
automatic outlet
Adaptor for further

electric tools
User comfort with a

wide operating range
5 m long suction hose

and 8 m long AC power cord
Fig. folded filter

No. FF55374
Model kg g No.
RODIA DRY CLEANER 1600 10.8 FF35144

Folded filter (2 pcs.) for wet suction 1.0 FF55374
Fleece filter (5 pcs.) for dry suction 0.3 FF55388
53
3
54
Bending
Manual 3
Bender one-handed 58 - 60
Bending pliers 61 - 62
Tube bending springs CU 63
Internal bending springs MLP 63
Vice bender 64 - 65
Manual hydraulic
Bender, manual hydraulic 66 - 67
Electro-hydraulic
Bender, electro-hydraulic 68 - 69
Electro
Bender, electric 70 - 72
Bending tables 72 - 75
55
Bending
System overview
Push bending
TUBE BENDER TUBE BENDER Maxi TUBE BENDER Maxi MLP
3

Method: Manual 90° Manual 90° Manual 90°
Working range: Ø 5 - 12 mm (1/4 - 1/2”), Ø 12 - 22 mm (3/8 - 7/8”) –

Copper 1 mm, soft 1 mm, soft

Aluminium 1 mm, soft 1 mm, soft

Precision steel 1 mm, soft 1 mm, soft
Working range: – Ø 12 - 18mm (3/8 - 5/8”) –

Stainless steel 1 mm, soft
Working range: – Ø 14 - 26 mm (5/8 - 7/8”) Ø 14 - 32 mm

MLP 2 mm 2 mm
Page 58 59 60
Pull bending
Standard two handed MULTIBEND MINIBEND Standard bender
bender
Method: Manual 90° Manual 180° Manual 180° Manual 180°
Working range: Ø 12 - 22 mm Ø 10 - 18 mm (1/4 - 5/8”) Ø 6 - 10 mm (1/4 - 3/8”) Ø 6 - 18 mm (1/4 - 5/8”)

Copper 1 mm, semi-hard 1 mm, soft 1 mm, soft 1 mm, soft
Working range: Ø 10 - 18 mm (1/4 - 5/8”) Ø 6 - 10 mm (1/4 - 3/8”) Ø 6 - 18 mm (1/4 - 5/8”)

–
Aluminium 1 mm, soft 1 mm, soft 1 mm, soft
Working range: Ø 10 - 18 mm (1/4 - 5/8”) Ø 6 - 10 mm (1/4 - 3/8”) Ø 6 - 18 mm (1/4 - 5/8”)

–
Precision steel 1 mm, soft 1 mm, soft 1 mm, soft
Working range:
– – – –
Stainless steel
Working range:
– – – –
MLP
Page 61 61 62 62
56
Bending
System overview
Push bending
ROBULL type E ROBULL type ME
3

Method: Manual hydraulic 90° Electro-hydraulic 90°
Working range:
– –
Copper
Working range:
– –
Aluminium
Working range:
Ø 3/8 - 2” Ø 3/8 - 2”
Precision steel
Working range:
– –
Stainless steel
Working range:
– –
MLP
Page 66 - 67 68 - 69
Pull bending
Pro bender Internal bending ROBEND H+W PLUS ROBEND 4000
springs MLP
Method: Manual 180° Manual 180° Manual 180° Electric 180°
Working range: Ø 10 - 16 mm (3/8 - 3/4”) Ø 8 - 22 mm (5/16 - 7/8”) Ø 12 - 35 mm (1/2 - 1.3/8”)

–
Copper 1 mm, soft, semi-hard, hard 1 mm, soft, semi-hard, hard 1.6 mm, soft, semi-hard, hard
Working range: Ø 8 - 22 mm (5/16 - 7/8”) Ø 12 - 28 mm (1/2 - 1.1/8”)

– –
Aluminium 1 mm, soft 2.0 mm, soft, semi-hard, hard
Working range: Ø 10 - 22 mm (3/8 - 5/8”) Ø 12 - 28 mm (1/2 - 1.1/8”)

– –
Precision steel 1 mm, soft 2 mm, soft
Working range: Ø 10 - 16 mm (3/8 - 3/4”) Ø 8 - 22 mm (5/16 - 7/8”) Ø 12 - 28 mm (1/2 - 1.1/8”)

–
Stainless steel 1 mm, soft, semi-hard, hard 1 mm 1.5 mm
Working range:
– Ø 6 - 20 mm – –
MLP
Page 61 63 64 - 65 70 - 71
57
Bending
Manual
TUBE BENDER
For accurate one-handed bending up to 90°,
Ø 5 - 12 mm (1/4 - 1/2”)
Product Profile
Suitable for pipes made of: Q Accurate bending even in restricted spaces
Copper (soft) and Q Production of U-bends, counter bends, swan-neck bends and
3 aluminium: Ø 5 - 12 mm, 1/4 - 1/2” connecting bends possible at all levels
Precision steel (soft): Ø 5 - 12 mm, 1/4 - 1/2” Q Quick and simple change of the bending formers
Q Fast release and removal of the bending formers
Q One-handed operation through the ergonomic design
Q Fast and accurate bending
Ratchet arm with

bayonet coupling Release lever
Quick change of the Quick release and reset

bending formers of the bending formers
Ergonomic design
One-handed operation
Compact design
Accurate bending even

in restricted spaces
Open bending frame
Production of U-bends, counter

bends, swan-neck bends and
connecting bends possible at all Mechanical ratchet feed
levels
Quick and accurate bending
TUBE BENDER
Various bends possible (No. 24130) Bending formers (No. 24048) Back plates (No. 24049) Bending segments
TUBE BENDER sets include: basic tool complete with bending segments,
back plates, ROCASE 4212 incl. inlay (No. 1300003334 + No. 1300004003)
TUBE BENDER bending segments
Model
kg g No. Model Size kg g No.
Basic set (basic tool, back plates, 1.00 24010 Bending segment 5 mm 190 24001
plastic case) Bending segment 6 mm 210 R2403200
TB set 5 - 6 - 8 - 10 mm 2.84 24131 Bending segment 8 mm 250 R2403300
TB set 6 - 8 - 10 - 12 mm 3.03 24132 Bending segment 9 mm 360 R2403400
TB set 8 - 10 - 12 mm 2.82 24133 Bending segment 10 mm 390 R2403500
TB set 1/4 - 5/16 - 3/8 - 1/2” 2.92 24134 Bending segment 12 mm 390 24007
Basic tool without bending segments 0.36 766004016 Bending segment 1/4” 210 R2403200
Support segment 0.05 24048 Bending segment 5/16” 250 R2403300
Back plate without support segment 0.14 24049 Bending segment 3/8” 270 24006
Bending segment 1/2” 380 24008
Previous bending segments and back plates including support segments from
earlier models are compatible!
58
Bending
Manual
TUBE BENDER MAXI
For accurate one-handed bending up to 90°,
Ø 12 - 26 mm (3/8 - 7/8”)
Product Profile
F or the bending of pipes made of soft copper and aluminium, Q Eliminates the cost for bending formers, storage and purchase
coated copper and precision steel pipes as well as multilayered Q Quick release and reset of the bending segments
composite pipes. Q Bending segments are easily exchanged 3
Suitable for pipe made of: n Optimum bending results
Copper (soft)
and aluminium: Ø 10 - 22 mm, 3/8 - 7/8”
Copper (coated): Ø 10 - 18 mm, 3/8 - 5/8”
Precision steel (soft): Ø 10 - 22 mm, 3/8 - 7/8”
Stainless steel (thin-walled, soft): Ø 10 - 18 mm, 3/8 - 5/8”
MLP (Multilayer): Ø 14 - 26 mm, 5/8 - 7/8” Safe transport
Handle will not open

during transport
Optimum bending results
Plastic bending segments

and support segments with
increased conductivity
Mechanical ratchet feed
Quick precise bending
Release lever
Quick release and reset of

the bending former
Adjustable bending frame
Production of U-bends, counter bends,

swan-neck bends and connecting
bends possible at all levels
TUBE BENDER MAXI sets include: basic unit (No. 766100016), back plate support
with segments (Cu set No. 23047, MLP set No. 23008), ROCASE 4414 incl. inlay
TUBE BENDER MAXI bending segments
(No. 1300003541 + No. 1300004708)
Model Size max. mmkg g No.
Model kg g No.
Bending segment 10 mm 1.0 80 23001
TB MAXI set 12 - 15 - 18 - 22 mm 3.5 023020X Bending segment 12 mm 1.0 80 23002
TB MAXI set 12 - 14 - 16 - 18 - 22 mm 3.5 023021X Bending segment 14 mm 1.0 80 23003
TB MAXI set 3/8 - 1/2 - 5/8 - 3/4 - 7/8” 3.3 023022X Bending segment 15 mm 1.0 90 23004
TB MAXI set MLP 14 - 16 - 18 - 20 - 25 mm 3.3 023090X Bending segment 16 mm 1.0 100 23005
TB MAXI set MLP 14 - 16 - 18 - 20 - 26 mm 3.3 023091X Bending segment 18 mm 1.0 140 23006
Basic tool w/o back plate support 1.0 766100016 Bending segment 22 mm 1.0 170 23007
Back plate support w/o support segment 0.5 R2301500 Bending segment 3/8” 1.0 70 23010
Support segments MLP R/L 10 - 25 mm (2 pcs.) 0.5 23008 Bending segment 1/2” 1.0 80 23011
Support segments R/L 12 - 22 mm (2 pcs.) 0.1 23047 Bending segment 5/8” 1.0 100 23012
Bending segment 3/4” 1.0 120 23013
Previous bending segments and support segments from earlier models are compatible! Bending segment 7/8” 1.0 170 23014
59
Bending
Manual
TUBE BENDER MAXI MLP
One-handed bending tool for precision bending of
multi-layered composite pipes (MLP), Ø 14 - 32 mm
Product profile
Universal bending tool. Increases safety by reducing the number n Ideal in confined spaces
of joints. Eliminates the costs for bending formers, storage and n Quick release and resetting of bending formers
3 purchase. n Bending formers easily changed
n Optimal bending results
n Reduction of pressure-loss in the unit due to the low cross-
sectional constriction as compared to prefabricated form pieces
Adjustable bending Ratchet arm with

frame bayonet coupling
Production of U-bends, Bending formers

counter bends, swan-neck easily changed
bends and connecting
bends possible at all levels
Smooth running feed lever
Ideal for use in confined spaces and

for one-handed operation
Plastic bending formers and

support segments with
increased conductivity
Release lever
Optimum bending results
Quick release and resetting
of bending formers
Mechanical ratchet feed
Quick operation
Fig. TUBE BENDER MAXI MLP
Body made of resistant

Universal field operation die-cast steel
Sturdy and long-lasting
Sets (No. 23065 / 23095) include: TUBE BENDER MAXI MLP (No. 23076),
support brackets (No. 23080), bending segments in carrying case
Model Description No.
TUBE BENDER MAXI MLP 14 - 16 - 18 - 20 - 25 - 32 mm 23065

TUBE BENDER MAXI MLP 14 - 16 - 18 - 20 - 26 - 32 mm 23095
ACCESSORIES
Description kg g No. Description kg g No.
Bending segment 14 x 2,0 mm 80 23003 Bending segment 26 x 2,0 mm 200 23053

Bending segment 16 x 2,0 mm 100 23005 Bending segment 32 x 2,0 mm 380 23051
Bending segment 18 x 2,0 mm 140 23050 Basic tool 32 w/o support brackets 1,280 23076
Bending segment 20 x 2,0 mm 150 23052 Support brackets with support segments R/L 23076 790 23080
Bending segment 25 x 2,0 mm 180 23009 Support segment MLP R/L 14 - 32 mm for 23076 (1 pc.) 200 23083
60
Bending
Manual
Pro bender
For Bending of pipes out of copper, stainless steel and
carbon steel in the sizes 10 mm and 16 mm and 3/8“ - 3/4“
KEY FEATURES
Q ending of pipes out of copper, stainless steel and carbon steel
B
possible
Q Long lasting due to forged cast iron body
Q Comfortable working due to long levers and rubber handles
Q Clamping surface for working with a vice 3
R
Size max. mm Radius mm L mm kg g No.
3/8” / 10 mm 1.0 40 530 2.2 1000001431

1/2” 1.0 47 530 2.1 767050016
5/8” / 16 mm 1.0 76 770 4.0 1000000445
3/4” 1.0 76 770 3.9 767750016
MULTIBEND standard bender 180° Standard two handed bender 90°

For accurate bending up to 180° of pipes made of soft For accurate bending up to 90° for pipes made
copper, aluminium and precision steel Ø 10 - 18 mm of semi-hard copper according to DIN EN 1057
KEY FEATURES Ø 12 x 1.0 - 22 x 1.0 mm
n Bending radius display of 0 - 180° for accurate bending KEY FEATURES
n Clamp mechanism for better pipe hold allows the bending of n Universal bender for sanitary and heating installations
shorter pipe pieces refrigeration and air-conditioning systems
n Light construction allows for fatigue-free hand operation n Long handles allow for better leverage in the bending of
semihard copper pipes
n Bending pliers with sliding carriage for millimetre-exact bending
n Accurate adjustments between the bending radius and handle
length reduces effort required
Measurement scale
Accurate bending possible
Knee bending possible
Practice bending
R
Size max. mm Radius mm kg g No.
R
10 mm 1.0 30 0.37 25401 Size mm Radius mm L mm kg g No.
12 mm 1.0 36 0.64 25402
14 mm 1.0 42 0.98 25403 12 mm 1.0 43 460 1.4 462212
15 mm 1.0 48 1.45 25404 15 mm 1.0 60 600 2.3 462215
16 mm 1.0 48 1.46 25405 18 mm 1.0 74 860 3.2 462218
18 mm 1.0 54 2.00 25406 22 mm 1.0 87 900 4.3 462222
61
Bending
Manual
Method L Method R
MINIBEND
For accurate two handed bending up to 180° of pipes
made of soft copper, brass, aluminium and precision
steel Ø 6 - 10 mm (1/4 - 3/8”)
KEY FEATURES
n Suitable for use in refrigeration and air-conditioning, oil supply,
automotive, hydraulic and pneumatic industries
3
Method L: Determination of the length of L - Left:
O: Reference to bending scale (0-0) and/or start/end of the bending radius
L: Used to determine/indicate the final dimension desired from the left
(pipe beginning) up to top edge of the pipe (Measure X)
Method R: Determination of the length of R - Right:

O: Reference to bending scale (0-0) and/or start/end of the bending radius
R: Used to determine/indicate the final dimension desired from the right
(pipe beginning) up to top edge of the pipe (Measure Y)
Accurate bending
Model Size kg g No.
Minimum size chart and bending
radius display on measurement scale
MINIBEND 6 - 8 - 10 mm 420 25150
MINIBEND 1/4 - 5/16 - 3/8” 420 25151
Standard bender 180°

For accurate bending up to 180° of pipes made of soft
copper, aluminium and precision steel
Ø 6 - 18 mm (1/4 - 5/8”)
KEY FEATURES
n Bending angle measurement of 0 - 180° for accurate bending
n Clamp mechanism for better pipe hold allows the bending of
shorter pipe pieces
Q Light construction allows for fatigue-free hand operation
Accurate bending
Minimum size chart and

bending radius display on R
measurement scale Size Radius mm L mm kg g No.
6 mm 18 305 550 25130

10 mm 30 390 970 25132
12 mm 36 390 980 25133
14 mm 47 450 1,580 25134
15 mm 54 450 1,830 25135
16 mm 58 450 1,830 25136
18 mm 66 480 2,110 25137
1/4” 18 305 560 25140
5/16” / 8 mm 24 305 640 25131
1/2” 30 390 1,680 25142
5/8” 58 450 1,830 25136
ACCESSORIES
Description No.
Internal / external deburrer 32 1500000236

Bending spray, 150 ml 63 25120
62
Bending
Manual
Copper tube bending springs
For free-handed bending of soft copper pipes
Ø 8 - 16 mm (1/4 - 5/8”)
KEY FEATURES
n Coiled cone for ideal handling even with longer pipes
n Tough and long lasting with the cadmium-plated spring steel
n Optimal spring form prevents buckling in bending radius area
Size kg g No. Size No.

kg g
8 mm 70 25181 5/16” 70 25181

10 mm 80 25182 1/2” 130 25190
12 mm 160 25183 5/8” 220 25186
15 mm 220 25185
16 mm 220 25186
MLP internal bending springs

For hand bending of aluminium multi-layer pipes (MLP)
Ø 6 - 20 mm
KEY FEATURES
n Ideal operation even with longer pipes:
Grip ring for retraction out of the pipe
n Entry taper for clean insertion in the pipe
n Sturdy and long lasting: NIROSTA spring steel
n Pipe will not buckle due to optimal spring form
Grip ring Entry taper
for insertion into and re- for clean insertion

traction out of the pipe in the pipe
Model Bending spring Pipe kg g No.
MLP-internal-bending spring 6.0 mm 12 mm 90 25441

MLP-internal-bending spring 19.0 mm 25/26 mm 380 25446
Bending spray
For bending copper and steel pipes
KEY FEATURES
n Combination of slide and bending oil
n Because of the special viscosity even copper and steel pipes are
able to be bent easily
Model Contents No.
Bending spray, 150 ml 150 ml 25120
ACCESSORIES
Description No.
Internal / external deburrer 32 1500000236
63
Bending
Manual
ROBEND H+W PLUS
For accurate cold bending up to 180°,
Ø 8 - 22 mm (5/16 - 7/8”)
Product profile
For accurate bending up to 180° on pipes made of: n Exact bending to the mm on continuous pipe
Copper (soft, semi-hard, hard n Retains shape and remains stable
3 thin-walled): Ø 8 - 22 mm 5/16 - 7/8” n Two-handed bending possible with the additional handle
Copper (coated, also up to Ø 18 mm / 5/8”
thin-walled): Ø 10 - 18 mm 3/8 - 5/8” n Eliminates the costs of purchase and storage of bending formers
Aluminium and brass: Ø 8 - 22 mm 5/16 - 7/8” n Easy bending through clamping on a vice
Precision steel (also coated): Ø 10 - 22 mm 3/8 - 5/8” n Exact bending with the minimum size chart and bending
Seamless stainless steel: Ø 8 - 22 mm 5/16 - 7/8” radius display
ROLUB-Anti-Block-System
Less effort due to lower friction

and optimum distribution of the
bending spray
ROLUB-Anti-Block-System!
Optimum combination of ROLUB

guide shoe and the bending former
Perfect bending results

without friction marks
Made from high-

quality forged
aluminium
Retains shape and

remains stable
Minimum size chart and

bending radius display
Accurate bending
Thread for the attachment

Bending formers with of the additional lever
base plate (accessories)
Easy bending through Free-hand bending possible

clamping on a vice
64
Bending
Manual
ROBEND H+W PLUS bender ROBEND H+W PLUS bending sets
Universal hand bender complete with bending former, fork with Sets include: ROCASE 6414 for a maximum of 6 bending formers, 2
ROLUB guide shoe and handle. Universal application in sanitary and levers for vice bending and bending spray (No. 25120).
heating installations, refrigeration and air-conditioning systems Bender corresponds to the respective pipe dimensions.
and industrial systems.
ROBEND H+W PLUS bending sets
Model Description mm
3
kg g No.
ROBEND H+W PLUS 12 - 15 - 18 - 22 mm 1.0 16.5 24500

ROBEND H+W PLUS 10 - 12 - 14 - 16 mm 1.0 16.3 24501
ROBEND H+W PLUS 12 - 14 - 16 - 18 mm 1.0 13.6 24502
ROBEND H+W PLUS 15 - 18 - 22 mm 1.0 14.9 24505
ROBEND H+W PLUS 1/2 - 5/8 - 3/4” 1.0 13.6 24503
ROBEND H+W PLUS 1/2 - 5/8 - 7/8” 1.0 13.7 24504
ROBEND H+W PLUS bender

ROLUB Anti-Block special guide shoe
R
kg g
Size max mm Radius mm No.
Size kg g No.
8 mm 1 22 660 24508
10 mm 1 32 1,180 24510 8 mm 20 25308
12 mm 1 38 1,110 24512 10 mm 20 25310
14 mm 1 45 1,370 24514 12 mm 30 25312
15 mm 1 45 1,370 24515 14 mm 30 25314
16 mm 1 64 2,620 24516 15 mm 30 25315
18 mm 1 64 2,620 24518 16 mm 50 25316
22 mm 1 81 3,800 24522 18 mm 50 25318
5/16” 1 22 660 24508 22 mm 90 25322
1/2” 1 38 1,110 24552 5/16” 20 25308
5/8” 1 64 2,620 24516 1/2” 30 25313
3/4” 1 81 3,850 24519 5/8” 50 25316
7/8” 1 81 3,800 24522 3/4” 90 25319
ACCESSORIES (additional lever for two-handed bending)* 7/8” 90 25322
Lever (short) for bending formers Ø 8 mm / 3/8” 25075
Lever for bending formers Ø 10 - 15 mm 25076
Lever for bending formers bigger than Ø 15 mm 25078
Bending spray, 150 ml 25120
ROCASE 6414 1300003542
Plastic inlay f. ROCASE 6414 1300004002
*Possible from 10 mm
Conventional bender ROBEND with ROLUB-system
ROLUB Anti-Block special guide shoe

Especially adapted to the ROBEND H+W PLUS bender the
ROLUB guide shoe with two-point lubricating chamber system
Elastic honeycomb construction

One-point Two-point
support plate support plate Up to 42% less effort due to
less friction
Accurate bending
Two-point lubricating
ROLUB special guide Shoe chamber system
made of high-quality polyamide
Ensures optimum
Perfect bending results distribution of
without friction marks lubrication
65
Bending
Manual hydraulic
ROBULL type E
1)
For precise, manual hydraulic cold bending up to 90°
Product profile
Broadly applicable, universal portable hydraulic bending system n Precise bending with the angle scale on the support brackets
for plumbing, sanitary and heating installation on construction n Reduces welded joints
sites, for apparatus and boiler construction and for industrial use. n No pre-warming of pipe is required
3 Also suitable for aligning tubes. n No bending forms needed
ROBULL type E: n Works quicker with the 150 kN piston strength
For accurate bending up to 90° on pipes made of: n Easy and simple operation
Carbon steel suitable for n Closed, low-maintenance hydraulic system with a mono-block
welding and thread-cutting: Ø 3/8 - 2” design and with quick, automatic piston retraction
n Comfortable working position with the tripod stand (opt.)
n With foldable and adjustable bending frame
Precision bend forming

Effective work
Exact bending
Hydraulic pump with
150 kN piston load and
high capacity
Hardened, hard chrome-plated
pistons
High load capacity
Automatic piston return

once unloaded
Easy and simple operation
Oil filter
Fast, uninterrupted work

and low-maintenance
hydraulic system
ROBULL type E
Optional: tripod stand

(No. 58182)
Comfortable working position ROBULL type E with adjustable bending frame: ROBULL hydraulic bending machine,
open bending frame (No. 57981), 2 pins for frame (No.57979), support segment
(No.57983), support segment with degree gradation (No. 57982), bending segment
standard 90° in 3/8” (No. 57985), 1/2” (No. 57986), 3/4” (No. 57987), 1” (No. 57988),
1.1/4” (No. 57989), 1.1/2” (No. 57990), 2” (No. 57991), hydraulic oil 1 l (No. 58185),
steel carrying case (No. 58206)
ROBULL type E with foldable bending frame: same scope of delivery as the ROBULL
type E with adjustable bending frame but with foldable bending frame (No. 58002)
Model Description kg
g No.
ROBULL type E without accessories 16.8 057950X

ROBULL type E with adjustable bending frame and accessories (see above) 59.8 057966X
ROBULL type E with foldable bending frame and accessories (see above) 72.6 057961X
1)
Bending
Manual hydraulic
ROBULL type E
ROBULL type E with Fig. similar

foldable bending frame
ROBULL type E bending segments ROBULL type E bending segments

Small bending radius (red) Large bending radius (black)
Wall thickness R Wall thickness R

inch mm min. mm mm kg g No. inch mm min. mm mm kg g No.
3/8” 17.2 2.35 45 0.7 57985 3/8” 17.2 2.35 56 0.8 58010
1/2” 21.3 2.65 49 0.7 57986 1/2” 21.3 2.35 85 0.9 58011
3/4” 26.9 2.65 65 0.8 57987 3/4” 26.9 2.65 115 1.2 58012
1” 33.7 3.25 89 1.3 57988 1” 33.7 2.65 145 2.1 58013
1.1/4” 42.4 3.25 115 1.6 57989 1.1/4” 42.4 3.25 180 3.5 58014
1.1/2” 48.3 3.25 137 2.4 57990 1.1/2” 48.3 3.25 214 4.3 58015
2” 60.3 3.65 200 3.2 57991 2” 60.3 3.65 245 5.6 58016
ACCESSORIES
Model No. Model kg g No.

kg g
Bending frame, adjustable 15.2 57981 Sup. seg. w/ degree gradation, foldable, E / ME 12.5 775504100
Support segments f. ROBULL E / ME 2.6 775004000 Locking pin 0.3 57979
with degree gradation (1 piece) Hydraulic oil, 1 litre 1.0 58185
Support segments f. ROBULL E / ME 2.6 57983 Tripod stand 3.0 58182
without degree gradation (1 piece) Steel case 10.0 996277400
67
Bending
Electro-hydraulic
ROBULL type ME
1)
For precise, power hydraulic cold bending up to 90°
Product profile
Various uses, mobile hydraulic bending machine for use on the n P recise bending with the angle scale on the support segments
building site in gas, sanitary and heating installations. n Reduces welding joints
ROBULL type ME: n Pre-warming of the pipe no longer necessary
3 For accurate bending up to 90° on pipes made of: n No bending forms are necessary
Carbon steel suitable for n Effective use with the 150 kN piston strength
welding and thread-cutting: Ø 3/8 - 2” n Easy and simple operation
n Closed, low-maintenance hydraulic system with a mono-block
design and with quick, automatic piston retraction
n Comfortable working position with the tripod stand (optional)
n With foldable and adjustable bending frame
Precision bend forming Electro-hydraulic pump

Exact bending Ideal for batch production
Hardened, hard
chrome-plated pistons
High load capacity
Automatic piston return

once unloaded
Easy and simple operation
Oil filter
Fast, uninterrupted work

and low-maintenance
hydraulic system
ROBULL type ME
Optional: Tripod stand (No. 58182)
Comfortable working position

ROBULL type ME with adjustable bending frame: ROBULL hydraulic bending machine
230 V, adjustable bending frame (No. 57981), 2 locking pins (No. 57979), support
segments (No. 57983), support segments with degree gradation (No. 57982), bending
segments standard 90° in 3/8” (No. 57985), 1/2” (No. 57986), 3/4” (No. 57987),
1” (No. 57988), 1.1/4” (No. 57989), 1.1/2” (No. 57990), 2” (No. 57991), hydraulic oil 1 l
(No. 58185), steel carrying case (No. 58206)
ROBULL type ME with foldable bending frame: same scope of delivery as ROBULL type
ME with adjustable bending frame but with foldable bending frame (No. 58002)
g No.
ROBULL type ME without accessories 17.8 057969X

ROBULL type ME with adjustable bending frame and accessories (see above) 59.8 057973X
ROBULL type ME with foldable bending frame and accessories (see above) 72.6 057972X
1)
Bending
Electro-hydraulic
ROBULL type ME
ROBULL type ME with Fig. similar

foldable bending frame
ROBULL type ME bending segments ROBULL type ME bending segments

Small bending radius (red) Large bending radius (black)
Wall thickness R Wall thickness R

inch mm min. mm mm kg g No. inch mm min. mm mm kg g No.
3/8” 17.2 2.35 45 0.7 57985 3/8” 17.2 2.35 56 0.8 58010
1/2” 21.3 2.65 49 0.7 57986 1/2” 21.3 2.35 85 0.9 58011
3/4” 26.9 2.65 65 0.8 57987 3/4” 26.9 2.65 115 1.2 58012
1” 33.7 3.25 89 1.3 57988 1” 33.7 2.65 145 2.1 58013
1.1/4” 42.4 3.25 115 1.6 57989 1.1/4” 42.4 3.25 180 3.5 58014
1.1/2” 48.3 3.25 137 2.4 57990 1.1/2” 48.3 3.25 214 4.3 58015
2” 60.3 3.65 200 3.2 57991 2” 60.3 3.65 245 5.6 58016
ACCESSORIES

kg g
Bending frame, adjustable 15.2 57981 Sup. seg. w/ degree gradation, foldable, E / ME 12.5 775504100
Support segments f. ROBULL E / ME 2.6 775004000 Locking pin 0.3 57979
with degree gradation (1 piece) Hydraulic oil, 1 litre 1.0 58185
Support segments f. ROBULL E / ME 2.6 57983 Tripod stand 3.0 58182
without degree gradation (1 piece) Steel case 10.0 996277400
69
Bending
Electro
ROBEND 4000 1)
Portable, sturdy and powerful. The successor of the

proven ROBEND 3000, now with a higher bending capa-
city. Cold bending up to 180°, Ø 12 - 35 mm (1/2 - 1.3/8“).
Product profile
Universal application in sanitary and heating installations, in n uick return on investment through the savings from joints,
Q
pipeline construction, refrigeration and air-conditioning systems soldering material and energy
3 as well as industrial systems and batch production. Fewer joints n Universal application: U-bends, counter-bends, swan-neck
means less potential for leaks. Safety implies less likelihood of bends and connecting bends possible at all levels
injury. n Retains shape and remains stable: bending formers made of
Suitable for pipes made of: high-quality forged aluminium
Copper (hard, semi-hard and n Top-quality, precise and simple to use
soft DIN EN 1057, 12735-1, 13348): Ø 12 - 35 mm, (1/2-1.3/8”) n Bending without deformation or ripples due to less friction
Copper and precision steel n Motor rating: 1,010 W
(coated): Ø 12 - 28 mm, (1/2-1.1/8”)
Precision steel (soft
DIN 2391 / 2393 / 2394): Ø 12 - 28 mm, (1/2-1.1/8”)
Threaded steel (DIN 2440 / 2441): Ø 1/2“, 3/4“
Seamless stainless steel (GW 541): Ø 12 - 28 mm, (1/2-1.1/8”)
Forged aluminium former
with bending radius scale
Easy to use
Pre-adjustment of the bending

angle without tools
Fast and precise bending
ROLUB special guide shoe
Bending without deformation

or ripples due to less friction
High-performance 1,010 W motor
Ideal for continuous operation
Bending technology
Simplified work preparation,

eliminates costs of purchase
Automatic switch-off when preset
and storage of fittings
bending angle is obtained
Fast batch production possible
Bending of pipes made of various

materials possible Seven-fold drive Comfortable carry handle ROBEND 4000 with tripod stand
1)
Bending
Electro
ROBEND 4000 sets 1)
Sets include: basic 230 V unit (No. 1000001559), bending formers and guide
shoes for respective pipe diameters, guide shoe axle (No. 25743), adaptor for
tripod stand (No. 25748) in basic unit (tripod stand optional), carrying case
ROLUB-Anti-Block-System!
ROLUB special guide shoe
made of high-quality polyamide
Perfect bending results without

3
friction marks
Optional:
Tripod stand
Two-point lubricating chamber system
Ensures optimum distribution of lubrication

Fig. similar
Forged aluminium former
ROBEND bending segment with bending radius display Pre-adjustment of the bending angle without tools
Model Description Pipe type kg g No.
ROBEND 4000 set 15 - 18 - 22 mm Cu, Fe et al. 24.12 1000001554

ROBEND 4000 set 15 - 18 - 22 - 28 mm Cu, Fe et al. 24.12 1000001550
ROBEND 4000 set 12 - 14 - 16 - 18 - 22 mm Cu, Fe et al. 21.90 1000001551
ROBEND 4000 set 15 - 22 - 28 mm Cu, Fe et al. 21.10 1000001545
ROBEND 4000 set 12 - 14 - 16 - 18 - 22 - 28 mm Cu, Fe et al. 24.10 1000001552
ROBEND 4000 set 12 - 15 - 18 - 22 mm Cu, Fe et al. 20.60 1000001548
ROBEND 4000 set 15 - 18 - 22 - 28 - 32 - 35 mm Cu, Fe et al. 32.00 1000001567
ROBEND 4000 set 1/2 - 5/8 - 3/4 - 7/8” Cu, Fe et al. 19.60 1000001553
ROBEND 4000 set 1/2 - 5/8 - 3/4 - 7/8 - 1.1/8 - 1.3/8” Cu, Fe et al. 29.00 1000001565
ROBEND 4000 set 7/8 - 1.1/8 - 1.3/8” Cu, Fe et al. 22.00 1000001566
ROBEND 4000 basic unit in carrying case without bending segments Cu, Fe et al. 14.50 1000001559
ACCESSORIES
Model No. Model
Bending spray, 150 ml 25120 Pipe cutter 14 - 27

Guide shoe axle 25743 Internal / external deburrer 32
ROBEND carrying case, for 5 segments up to Ø 30 mm 995830200 Hard soldering torch (SUPER FIRE 4 with MAPP2) gas) 150-151
Tripod stand, foldable 25748 Brazing solder 177
ROBEND carrying case, for 32 mm (1.1/4”) and 35 mm (1.3/8”) 1000001564
1)
C
2)
MAPP is a registered trademark of the MESSER Group GmbH, Bad Soden
Bending
Accessories and bending tables
ROBEND 3000 / 4000 bending formers For copper pipe DIN EN 1057, 12735-1, 13348, aluminium pipe,
For bending pipes Ø 12 - 35 mm (1/2 - 1.3/8”) precision steel pipe DIN 2391/93/94, stainless steel pipe and
others
Wall thickness Bending radius

Size mm mm kg g No.
12 mm 1.0 42 0.48 25612

14 mm 1.0 49 0.48 25614
3 15 mm 1.0 52 0.53 25615
16 mm 1.0 56 0.60 25616
18 mm 1.0 72 1.17 25618
20 mm 1.0 80 1.42 25620
22 mm 1.2 88 1.42 25622
28 mm 2.0 112 2.90 25628
32 mm* 2.0 128 3.40 1000001561
35 mm* 2.0 140 3.60 1000001563
For imperial copper pipe DIN EN 1057, 12735-1, 13348 alumi-

nium pipe, precision steel pipe DIN 2391/93/94, stainless steel
Fig. ROBEND 3000 / 4000 bending
set with ROLUB special guide shoe
pipe and others
Wall thickness Bending radius

Size mm mm kg g No.
1/2” 1.2 45 0.53 25652

For steel pipe DIN 2440 and DIN 2441 (except 3/4“) 5/8” 1.2 56 0.60 762955300
3/4” 1.2 80 1.42 25619
Wall thickness Bending radius 7/8” 1.2 88 1.42 762955700
Size mm mm kg g No. 1” 1.5 112 2.90 25625
1.1/8” 1.6 112 2.90 25626
1/2” 3.25 88 1.42 25684 1.1/4”* 2.0 128 3.40 1000001561
3/4” 3.25 112 2.90 25685 1.3/8”* 2.0 140 3.60 1000001563
*Bending former sets (No. 1000001561 / No. 1000001563) are only compatible with
ROBEND 4000. Only matching with optional plastic carrying case ( No. 1000001564).
Push bending
Symbols
L1, L2 = Leg length
a = Lay out length
L = Total length of the pipe piece
LW = Distance / pipe end - wall
AW = Distance / pipe middle - wall
LM = Minimum length*
LR = Reserve length*
45º- arc 90º- arc
L = L1 + L2 L = L1 + L2 - LM
a = L1 - LR a = L1 - LR
* All sizes listed are standards and are dependant on the material and the wall
72 thickness. Bending specific sizes based on the bending radius - tabular value
Bending
Bending tables
Calculation examples TUBE BENDER MAXI
Specifications:
Installation in corner areas
LW = 1,200 mm
AW = 30 mm
Pipe-Ø 12 mm, 90°-arc
Sought after:
Leg length L1 3
Applied size a
Solution:
Summary from the TUBE BENDER MAXI bending table
Leg length L1 = LW - AW = 1,200 - 30 = 1,170 mm

Applied size a = L1 - LR = 1,170 - 7.5 = 1,162.5 mm; LR ... Tabular value
TUBE BENDER at 45° at 90° at 180°

for Ø Bending radius Reserve length Minimum length Reserve length Minimum length Reserve length Minimum length
mm / inch R (mm) L R mm L M mm L R mm L M mm L R mm L M mm
4.75 / 5 20.0 4.5 1.0 4.5 10.0 - -
6 23.5 5.0 1.2 5.0 11.5 - -
8 28.0 7.0 1.4 7.0 14.0 - -
9 30.0 7.0 1.5 7.0 15.0 - -
10 34.0 7.5 1.8 7.5 17.5 - -
12 37.5 8.5 1.9 8.5 19.0 - -
3/16” 20.0 4.5 1.0 4.5 10.0 - -
1/4” 23.5 5.0 1.2 5.0 11.5 - -
5/16” 28.0 7.0 1.4 7.0 14.0 - -
3/8” 34.0 7.5 1.8 7.5 17.5 - -
1/2” 37.5 8.5 1.9 8.5 19.0 - -
TUBE BENDER MAXI at 45° at 90° at 180°

for Ø Bending radius Reserve length Minimum length Reserve length Minimum length Reserve length
mm / inch R (mm) L R mm L M mm L R mm L M mm L R mm
12 35.0 0.8 10.0 7.5 35.0 -
14 42.5 0.9 12.5 9.0 42.5 -
15 48.5 1.1 14.0 10.5 48.5 -
16 49.0 1.1 14.5 10.5 49.0 -
18 74.0 1.7 22.0 16.0 74.0 -
22 87.0 1.9 25.5 18.5 87.0 -
3/8” 35.0 0.8 10.0 7.5 35.0 -
1/2” 35.0 0.8 10.0 7.5 35.0 -
5/8” 49.0 1.1 14.5 10.5 49.0 -
3/4” 74.0 1.7 22.0 16.0 74.0 -
7/8” 87.0 1.9 25.5 18.5 87.0 -
TUBE BENDER MAXI CT at 45° at 90° at 180°

Tube Ø / Ws Bending radius Reserve length Minimum length Reserve length Minimum length Reserve length
mm R (mm) L R mm L M mm L R mm L M mm L R mm
10 x 0.6 42.5 0.8 12.5 9.0 42.5 -
12 x 0.6 49.0 1.1 14.5 10.5 49.0 -
15 x 0.7 74.0 1.7 22.0 16.0 74.0 -
18 x 0.7 87.0 1.9 25.5 18.5 87.0 -
73
Bending
Bending tables
Pull bending
Symbols
L1, L2 = Leg length
a = Lay out length
L = Total length of the pipe piece
LW = Distance / pipe end - wall
AW = Distance / pipe middle - wall
3 LM = Minimum length*
LR = Reserve length*
45º- arc 90º- arc 180º- arc
L = L1 + L2 L = L1 + L2 - LM L = L1 + L2 + LM
a = L1 - LR a = L1 - LR a = L1 - LR
Calculation examples
ROBEND 3000 / ROBEND 4000
Specifications:
Installation in corner areas
LW = 1,200 mm
AW = 30 mm
Pipe-Ø 12 mm, 90°-arc
Sought after:
Leg length L1
Applied size a
Solution:
Summary from the ROBEND 3000/4000 bending table
Leg length L1 = LW - AW = 1,200 - 30 = 1,170 mm

Applied size a = L1 - LR = 1,170 - 42 = 1,128 mm; LR ... Tabular value
* All sizes listed are standards and are dependant on the material and the wall
74 thickness. Bending specific sizes based on the bending radius - tabular value
Bending
Bending tables
ROBEND H+W Plus at 45° at 90° at 180°

Ø / Ws Bending radius Reserve length Minimum length Reserve length Minimum length Reserve length Minimum length
mm / Inch R (mm) L R mm L M mm L R mm L M mm L R mm L M mm
8 22 9 - 22 9.5 22 47
10 32 12 - 32 15.0 32 34
12 38 15 - 40 20.0 38 39
14 45 17 - 44 22.0 44 51
15 45 17 - 44 22.0 44 51
16 64 25 - 67 30.0 68 65
18 64 25 - 67 30.0 68 65
20 81 30 - 85 40.0 86 83 3
22 81 30 - 85 40.0 86 83
5/16” 22 9 - 22 9.5 22 47
3/8” 32 12 - 32 20.0 32 34
1/2” 38 15 - 40 22.0 38 39
5/8” 64 25 - 67 30.0 68 65
3/4” 81 30 - 85 40.0 86 83
7/8” 81 30 - 85 40.0 86 83
MINIBEND at 45° at 90° at 180°

Ø / Ws Bending radius Reserve length Minimum length Reserve length Minimum length Reserve length Minimum length
6 25.0 10.4 1.0 22.0 10.0 22.0 26.0
8 24.0 9.9 1.0 32.0 15.0 32.0 34.0
10 23.0 9.5 1.0 32.0 15.0 32.0 34.0
1/4” 25.0 10.4 1.0 22.0 10.0 22.0 26.0
5/16” 24.0 9.9 1.0 32.0 15.0 32.0 34.0
3/8” 23.0 9.5 1.0 32.0 15.0 32.0 34.0
Standard bender 180° at 45° at 90° at 180°

6 18.0 7.0 0.8 18.5 8.0 18.5 20.0
10 30.0 11.5 1.3 30.5 14.5 30.5 34.0
12 36.0 14.0 1.5 36.5 15.0 36.5 37.5
14 47.5 18.5 2.0 48.5 20.5 48.5 52.5
15 54.0 21.0 2.3 56.0 24.5 56.0 58.0
16 58.0 22.5 2.5 64.0 28.5 64.0 67.0
18 66.0 25.5 2.8 68.0 31.0 68.0 72.0
1/4” 18.0 7.0 0.8 18.5 8.0 18.5 20.0
5/16” 24.0 9.5 1.0 24.0 12.0 24.0 27.0
1/2” 42.0 16.5 1.8 49.5 22.5 49.5 53.0
5/8” 58.0 22.5 2.5 64.0 28.5 64.0 67.0
MULTIBEND at 45° at 90° at 180°

mm R (mm) L R mm L M mm L R mm L M mm L R mm L M mm
8 24.0 9.5 1.0 24.0 10.0 24.0 26.0
10 30.0 12.0 1.3 30.5 14.5 30.5 32.5
12 36.0 14.0 1.5 36.5 15.5 36.5 37.5
14 42.0 16.5 1.8 42.0 19.5 42.5 44.0
15 48.0 19.0 2.0 48.0 22.0 48.0 53.0
16 48.0 19.0 2.0 48.0 22.0 48.0 53.0
18 54.0 21.0 2.3 54.0 26.0 54.5 58.0
ROBEND 3000 / 4000 at 45° at 90° at 180°

Pipe
12 42.0 16 - 42 24 42 68
14 wated 52.5 21 - 53 30 53 87
15 52.5 21 - 53 30 53 87
17 wated 72.0 28 - 72 41 72 107
18 72.0 28 - 72 41 72 107
20 wated 88.5 35 - 89 51 89 121
22 88.0 35 - 88 50 88 119
24 wated 112.0 43 - 110 62 110 144
28 112.0 44 - 112 64 112 148
30 wated 112.0 45 - 114 66 114 152
32 / 1.1/4” 128.0 52 - 140 70 135 140
35 / 1.3/8” 140.0 55 - 150 80 145 150
3/8” steel 12.0 31 - 80 46 80 103
1/2” copper 45.0 18 - 45 26 45 74
1/2” steel 88.0 35 - 88 50 88 119
5/8” copper 56.0 23 - 56 32 56 93
3/4” steel 112.0 43 - 112 64 112 148
3/4” copper 80.0 31 - 80 46 80 103
7/8” copper 88.0 35 - 88 50 88 119
1” copper 112.0 44 - 112 64 112 148
1.1/8” copper 112.0 45 - 114 66 114 152
75
4
76
Expanding, extracting,
flaring
Expanding, manual 80 - 84
4
Expanding, electric 85
Expanding, hydraulic 86 - 87
Accessories expanding 88
Expanding and extracting, manual 89
Extracting, manual 90 - 91
Accessories extracting, manual 92
Flaring 93 - 96
Torque wrench 97
77
Expanding, extracting, flaring
System overview
Expander
ROLOCK expander Expander A0 Step expander A1
power torque
Operation mode: Manual Manual Manual

4 Working range: Ø 8-42 mm (5/16-1.3/4”) Ø 22-67 mm (1-2.1/2”) Ø 35-108 mm (1.3/8-4.1/8”)
Copper 1.6 mm, soft, semi-hard 2.5 mm, soft, semi-hard 2.5 mm, soft
Working range: Ø 8-28 mm (5/16-1.1/8”) Ø 22-67 mm (1-2.1/2”) Ø 35-108 mm (1.3/8-4.1/8”)

Aluminium 1.6 mm, soft 2.5 mm, soft, semi-hard 2.5 mm, soft
Working range: Ø 8-28 mm (5/16-1.1/8”) Ø 22-54 mm (1-2.1/8”) –

Precision steel 1.6 mm, soft 1.5 mm, soft
Working range: Ø 8-22mm (5/16-7/8”) Ø 22-54 mm (1-2.1/8”) –

Stainless steel 1 mm, soft 1.5 mm, soft
Page 80 - 81 83 85
ROMAX expander H 600

AC ECO MAXI
Operation mode: Electro-hydraulic Hydraulic
Working range: Ø 35-108 mm (1.3/8-4.1/8”) Ø 8-110 mm (5/16-4.1/4”)

Copper 2.5 mm, soft, semi-hard 3 mm, soft, semi-hard
Working range: Ø 35-108 mm (1.3/8-4.1/8”) Ø 8-110 mm (5/16-4.1/4”)

Aluminium 2.5 mm, soft 3 mm, soft, semi-hard
Working range: – Ø 8-110 mm (5/16-4.1/4”)

Precision steel 3 mm, soft, semi-hard
Working range: – Ø 8-110 mm (5/16-4.1/4”)

Stainless steel 3 mm, soft, semi-hard
Page 85 86
78
System overview
Expander heads
Expander head Expander head Expander head Flanged riveted
ROLOCK standard type S expander head
Working range: Ø 8-42 mm (5/16-1.3/4”) Ø 8-42 mm (5/16-1.3/4”) Ø 22-67 mm (1-2.1/2”) Ø 15-38 mm

4
Copper 1.6 mm, soft, semi-hard 1.6 mm, soft, semi-hard 2.5 mm, soft, semi-hard 1.5 mm, soft, semi-hard
Working range: Ø 8-28 mm (5/16-1.1/8”) Ø 8-28 mm (5/16-1.1/8”) Ø 22-67 mm (1-2.1/2”)

–
Aluminium 1.6 mm, soft 1.6 mm, soft 2.5 mm, soft
Working range: Ø 8-28 mm (5/16-1.1/8”) Ø 8-28 mm (5/16-1.1/8”) Ø 22-54 mm (1-2.1/8”)

–
Precision steel 1.6 mm, soft 1.6 mm, soft 1.5 mm, soft
Working range: Ø 8-22mm (5/16-7/8”) Ø 8-22mm (5/16-7/8”) Ø 22-54 mm (1-2.1/8”)

–
Stainless steel 1 mm, soft 1 mm, soft 1.5 mm, soft
Page 82 82 84 84
Expanderkopf H2, Expanderkopf H2, Stufen-Expanderkopf

Typ 2* Typ 3*
Arbeitsbereich: Ø 28-70 mm (1.1/8-2.3/4”) Ø 70-110 mm (2.3/4-4.1/4”) Ø 35-108 mm (1.3/8-4.1/8”)

Kupfer 2,5 mm, weich, halbhart 3 mm, weich, halbhart 2,5 mm, weich, halbhart
Arbeitsbereich: Ø 28-70 mm (1.1/8-2.3/4”) Ø 70-110 mm (2.3/4-4.1/4”) Ø 35-108 mm (1.3/8-4.1/8”)

Aluminium 2,5 mm, weich, halbhart 3 mm, weich, halbhart 2,5 mm, weich
Arbeitsbereich: Ø 28-70 mm (1.1/8-2.3/4”) Ø 70-110 mm (2.3/4-4.1/4”)

–
Präzisionsstahl 2,5 mm, weich, halbhart 3 mm, weich, halbhart
Arbeitsbereich: Ø 28-70 mm (1.1/8-2.3/4”) Ø 70-110 mm (2.3/4-4.1/4”)

–
Edelstahl 2,5 mm, weich, halbhart 3 mm, weich, halbhart
Seite 87 87 85
* Availability, delivery time and price of custom-made expander heads upon request.
79
Expanding, manual
ROLOCK expander power torque
For expanding, reducing and calibrating soft and
semi-hard pipes Ø 8 - 42 mm (5/16 - 1.3/4”) as well as
producing tapers
Product profile
For efficient, fitting-free installation of pipes in sanitary heating, n Eliminates the cost of purchase and storage of fittings
gas, refrigeration and air-conditioning systems n Converts deformed pipes into fittings; saves resources
Suitable for pipes made of: n 50% reduction of labour, soldering materials, joints and energy
Copper (soft and semi-hard): Ø 8 - 42 mm, 5/16 - 1.3/4” n Reliable pipe connection according to DVGW standards
max. wall thickness 1.6 mm
n Tough, light and wear-resistant
Aluminium (soft): Ø 8 - 28 mm, 5/16 - 1.1/8”
4 max. wall thickness 1.6 mm
n Toolless fine adjustment of the capillary gap
n EPT-Technology – concealed bent lever
Precision steel (soft): Ø 8 - 28 mm, 5/16 - 1.1/8”
Stainless steel (soft): Ø 8 - 22 mm, 5/16 - 7/8”
Made in Germany!
The know-how from the pioneer of expanding
technology and the leading manufacturer of
expanding tools for over 50 years!
Toolless adjustment
of expanding dimension
and capillary gap
system
Twist & lock
and
for screwable
ds
twist-lock hea
Long lever arms
Reduces effort required
Expanding
Up to 50 % reduction in
labour, soldering materials,
joints and energy Ergonomic handles
No slipping,
no clamping
Steel receptacle
Twist & lock system:
resilient and hardwearing
High-performance,
forged aluminium body
Lightweight, optimal
handling
Extra long segments

Reliable pipe connection
according to DVGW standards
ROLOCK expander power torque kg g No.
Expander tool (without expander heads) 1.0 12400

for expander heads up to 42 mm / 1.3/4”
80
Expanding, manual
ROLOCK expander power torque sets
ROLOCK expander power torque sets include: expander heads,
ROLOCK expander power torque (No. 12400), internal and external
deburrer (No. 11006), inlay, carrying case
EPT-Technology (Enclosed Power Transmission)

The expander head offers the following technical benefits:
Concealed bent lever:
Protection against dirt and external mechanical damage
Energy efficient through optimised force transmission:
Ergonomic, highly optimised force flow in relation to the
hand force of the user, therefore reducing effort 4
For efficient, fitting-free installation of pipes
Fig. similar
ROLOCK expander power torque sets

Model kg g No.
12 - 15 - 18 - 22 mm 2.9 12500
12 - 15 - 18 - 22 - 28 mm 3.3 12503
10 - 12 - 16 - 22 - 28 mm 3.3 12505
12 - 14 - 16 - 18 - 22 mm 3.3 12509
10 - 12 - 14 - 16 - 18 - 22 mm 3.6 12511
10 - 12 - 15 - 16 - 18 - 22 - 28 mm 3.6 12537
12 - 14 - 16 - 18 - 22 - 28 - 32 mm 3.7 12538
3/8 - 1/2 - 5/8 - 3/4 - 1” 3.3 12517
3/8 - 1/2 - 5/8 - 3/4 - 7/8 - 1.1/8” 3.6 12518
1/2 - 5/8 - 3/4 - 7/8” 2.9 12521
12 - 16 - 18 - 22 - 28 mm 3.2 12522
1/2 - 5/8 - 7/8 - 1.1/8” 3.0 12524
12 - 15 - 18 - 22 - 28 - 35 - 42 mm 4.2 12526
1/2 - 3/4 - 1” 2.9 12535
3/8 - 1/2 - 5/8 - 3/4 - 7/8 - 1 - 1.1/8” 3.7 12536
3/8 - 1/2 - 5/8 - 3/4 - 7/8 - 1.1/8 - 1.3/8” 4.5 12541
Custom-made products*
ROCAM PE-X expander power torque
For expanding and calibrating PE-X and aluminium multi-
layered composite pipe (MLP) up to Ø 42 mm or 1.3/4”
as well as producing tapers
Expander heads coordinates with the following systems:
ROTEX, SCHELL, TECE / TECEflex, Vulkan-Lokring among others
ACCESSORIES
Description Description
Expander heads for ROLOCK expander power torque 82 Expander adaptor type S 84
Expander heads type S / riveted expander heads 84 Brazing solder 177
Pipe cutter 14 - 27 High-performance torch (SUPER FIRE 4 with MAPP1) gas) 150 - 151
Internal / external deburrer 32
* Availability, delivery time and price of custom products for other pipe
diameters available on request. 81
1)
Expanding, manual
Expander head ROLOCK and standard Made in Germany!
For producing standard precision flares Ø 8 - 42 mm The know-how from the pioneer of expanding
(5/16 - 1.3/4”) according to DVGW standards as well technology and the leading manufacturer of
as the specifications for the Gas de France expanding tools for over 50 years!
Product profile
KEY FEATURES
Q 50% reduction in labour, soldering materials and soldered joints Expansion of pipe ends Reduction
n Depth of the flare is consistent with DVGW standards
n Compulsory guidance guarantees a perfect centred position Size
and uniform capillary gap
n Robust and long lasting with the hardened segments A Also suitable for uneven pipes
Flare depth in mm
4
Specially hardened segments Step at the end of the segments
Robust and long lasting Enables recalibration of irregular

pipes and fittings
6 rivets and guide channels Extra long segments
Compulsory guidance guarantees a perfect Depth of the flare is consistent

centred position and uniform capillary gap with DVGW standards
Expander head ROLOCK Expander head standard

Twist & lock system for quick and easy Standard screwable expander head,
change between nominal diameters still compatible with the ROLOCK Expander
max. wall
thickness mm (soft) A ROLOCK Standard max. wall
thickness mm (soft) A ROLOCK Standard
mm Cu Al Fe Inox mm
kg g No. No. inch Cu Al Fe Inox mm
kg g
No. No.
8 1.0 1.0 1.0 1.0 6.0 120 12408 11008 5/16” 1.0 1.0 1.0 1.0 6.0 120 12408 11008
10 1.0 1.0 1.0 1.0 10.0 120 12410 11010 3/8” 1.0 1.0 1.0 1.0 7.4 120 12452 11052
12 1.2 1.2 1.2 1.0 12.6 120 12412 11012 1/2” 1.2 1.2 1.2 1.0 11.0 120 12453 11053
14 1.2 1.2 1.2 1.0 12.6 120 12414 11014 5/8” 1.2 1.2 1.2 1.0 14.0 120 12454 11054
15 1.2 1.2 1.2 1.0 15.5 120 12415 11015 3/4” 1.2 1.2 1.2 1.0 18.1 120 12455 11055
16 1.2 1.2 1.2 1.0 15.5 120 12416 11016 7/8” 1.2 1.2 1.2 1.0 18.0 140 12456 11056
18 1.2 1.2 1.2 1.0 17.5 120 12418 11018 1” 1.5 1.5 1.5 – 15.8 150 12457 11057
20 1.2 1.2 1.2 1.0 17.5 140 12420 11020 1.1/8”1.6 1.6 1.6 – 17.0 390 12458 11058
22 1.2 1.5 1.5 1.0 20.5 140 12422 11022 1.1/4”1.6 – – – 17.0 410 12459 11059
28 1.5 1.5 1.5 – 18.5 390 12428 11028 1.3/8”1.6 – – – 17.0 430 12435 11035
32 1.5 – – – 19.5 410 12432 11032 1.1/2”1.6 – – – 17.0 450 12438 11038
35 1.6 – – – 19.5 430 12435 11035 1.5/8”1.6 – – – 17.5 470 12462 11062
38 1.6 – – – 19.5 450 12438 11038 1.3/4”1.6 – – – 17.5 500 12463 11063
40 1.5 – – – 19.5 470 12440 11040 Availability, delivery time and price of custom products for other pipe
42 1.5 – – – 19.5 470 12442 11042 diameters available upon request.
Suitable for ROTHENBERGER ROLOCK expander power torque
Description Description
ROLOCK expander power torque 80 ROCASE 4414 red, without inlay 331
ROLOCK COMBI KIT expander / tee-extractor 89
82
Expanding, manual
Expander A0 Functional elements:
For expanding, reducing and calibrating thick walled Expander A0 with a tightly guided and reinforced, long
pipes Ø 22 - 67 mm (1 - 2.1/2”) as well as the production expander head, matches to the expander head type S!
of tapers
Product profile
Suitable for pipes made of: For efficient, fitting-free installation of pipes in sanitary heating, gas,
Copper and aluminium: Ø 22 - 67 mm, 1 - 2.1/2” refrigeration and air-conditioning systems
(soft, semi-hard) max. wall thickness 2.5 mm Q Application and savings advantages similar to
Precision steel (soft): Ø 22 - 54 mm, 1 - 2.1/8” ROLOCK expander power torque
and stainless steel per max. wall thickness 1.5 mm Q Precise and exact flaring
DVGW-GW541 Q Full bearing of the expander head segments allows heavy loads
Q Continuous adjustment of the socket size and capillary gap
4
Q Optimized action principle with long handles
Fine adjustment can be locked
Continuous adjustment of the

socket size and capillary gap
Long handles
Optimized action principle
Strong pin guide
Full bearing of the expander

head segments allow heavy loads
Reinforced expander
head casing
Precise and exact flaring
Expander A0 set (No. 11400) includes: expander head type S, special ratchet
(No. 27181)
Expander A0 basic unit (No. 11004) includes: square drive mechanism 3/4” with
handle, without expander head and ratchet
Model Size kg g No.
Expander A0 set 35 - 42 - 54 - 64 mm 8.12 11400

Fig. similar
Expander A0 basic unit 1.97 11004
83
Expanding, manual
Expander head type S
For the precise expansion of normal and thick walled
pipes Ø 22 - 67 mm (1 - 2.1/2”) and 2.5 mm wall Size
thickness A
mm
Accurate guidance of the segments through the reinforced expander head casing
max. wall
thickness mm A-size max. wall
thickness mm A-size
mm Cu Al Fe Inox kg
mm g No. inch Cu Al Fe Inox mm
kg g No.
22 2.0 2.0 1.5 1.5 18.5 350 11323 1” 2.0 2.0 1.5 1.5 18.5 350 11376
4 25 2.0 2.0 1.5 1.5 18.5 350 11325 1.1/8” 2.0 2.0 1.5 1.5 19.5 360 11358
28 2.0 2.0 1.5 1.5 19.5 360 11328 1.1/4” 2.0 2.0 1.5 1.5 19.5 380 11332
32 2.0 2.0 1.5 1.5 19.5 380 11332 1.3/8” 2.0 2.0 1.5 1.5 19.5 400 11335
35 2.0 2.0 1.5 1.5 19.5 400 11335 1.5/8” 2.0 2.0 1.5 1.5 19.5 450 11362
36 2.0 2.0 1.5 1.5 19.5 400 11336 2” 2.0 2.0 1.5 1.5 17.0 540 11364
42 2.0 2.0 1.5 1.5 19.5 450 11342 2.1/8” 2.5 2.5 1.5 1.5 17.0 570 11346
54 2.5 2.5 1.5 1.5 19.5 570 11346 2.1/2” 2.5 2.5 – – 17.0 690 11348
64 2.5 2.5 – – 19.5 690 11348
67 2.5 2.5 – – 19.5 730 11380
Expander adaptor type S

To increase the application area of the ROCAM /
ROLOCK expander power torque, ROMAX expander
compact standard and expander pistol H1
Allows the use of the expander heads type S with

copper pipe (soft) up to 67 mm and/or 2.1/2”!
Model max. max. mm

kg g No.
Adaptor type S, 67 mm and/or 2.1/2” 2.0 630 11007

without expander head
Flanged riveted expander heads Product profile

For use with the ROCAM / ROLOCK expander power APPLICATION AREA
torque, ROMAX expander compact standard
For producing exact hose connections, for example vibrating
and expander pistol H1 power units in
n Air-conditioning technology
n Auto manufacturing
n Industrial applications
Outer Distance
dia.-flange flange
mm mm mm pipe end mm
kg g No.
15 1.5 18 4 110 11955

18 1.5 21 4 110 11958
22 1.5 25 6 120 11962
28 1.5 31 6 370 11968
35 1.5 38 6 400 11975
38 1.5 41 6 430 11978
84
Expanding, electric
Step expander A1
For expanding, reducing and calibrating thick walled
pipes, Ø 35 - 108 mm (1.3/8 - 4.1/8”) as well as the
Product profile
production of tapers APPLICATION AREA
For efficient, fitting-free installation of pipes in sanitary, heating, gas,
refrigeration and air-conditioning systems
Suitable for pipes made of:
Fig. similar Copper and aluminium: Ø 35 - 108 mm, 1.3/8 - 4.1/8”
special ratchet (soft) max. wall thickness 2.5 mm
(No. 27181)
KEY FEATURES
Q Affordable alternative when laying larger pipe dimensions with
a considerable saving of soldering materials
Sets include: step expander with handle,
Q Expand without changing tools with the 6 size step expander 4
without special ratchet Q Full bearing of the expander head segments allows heavy loads
Q Optimum adjustment of the socket size and capillary gap with
the positive fine adjustment
Q Optimised force transmission with the trapezoidal screw thread
with self-lubricating bronze socket
Size kg g No. Q Compulsory guidance guarantees a perfect centred position and
uniform capillary gap with 6 rivets and guiding ridge
42 - 54 - 64 - 76.1 - 88.9 - 108 mm 4.2 11086
35 - 42 - 54 - 64 - 76 - 108 mm 3.9 11087
35 - 42 - 54 - 67 - 80 - 104 mm 3.9 11089
1.3/8 - 1.5/8 - 2.1/8 - 2.5/8 - 3.1/8 - 4.1/8” 4.2 11078
1.1/4 - 4” 3.8 11093
ROMAX expander AC ECO MAXI 1)
Electro-hydraulic expander with constant axial thrust,

230 Volt connection. For expanding and calibrating
pipes up to Ø 108 mm (4.1/8”) as well as producing
reductions.
Product profile
Suitable for pipes made of: n Long service life and high functional safety
Copper and aluminium: Ø 35 - 108 mm (1.3/8” - 4.1/8”) n The expansion / calibration takes place after pressing and
(soft and semi-hard) max. wall thickness 2.5 mm holding the switch
n Large working radius with the 5 m long cable
KEY FEATURES
n Optimally suited for batch production and large building sites TECHNICAL DATA
n Constant thrust with CFT Weight: approx. 13.7 kg
n User safety with the easy to reach emergency stop switch Motor: 230 V / 50 Hz
Balanced weight distribution

Article available upon request!2)
Secure hold in every working position,
ideal for one-handed use
Emergency stop switch Fully automatic expanding process
High user safety due to the

interruption of the feed and
the discharge of the
expander head 6-fold step expander
Expands without changing tools from

35 up to 108 mm (1.3/8 - 4.1/8”)
2. Switch directly within reach
Various holding positions possible, even

CFT in confined spaces (over head)
(Constant Force Technology)
For a constant axial thrust
1)
C
RO SERVICE+ only valid in participating countries
2) Availability, delivery time and price of custom products for other pipe

85
diameters available on request.
Expanding, hydraulic
Hydraulic expander system H 600 1)
For expanding, reducing and calibrating normal and

thick walled pipes in batch production as well as the
production of tapers
Product profile
Suitable for normal and thick walled pipes made of: Rated power: 1.2 kW
Copper and aluminium: Ø 8 - 110 mm, 5/16 - 4.1/4” Rated current: 2.1 A
max. wall thickness 3.0 mm Operating pressure: 80 - 600 bar
Precision and stainless steel: Ø 8 - 110 mm, 5/16 - 4.1/4” Max. operating pressure: 700 bar
max. wall thickness 3.0 mm Delivery capacity: 0.82 l / min
4 KEY FEATURES Safety category: IP 54
Actuation: 400 V / 1,200 W
n Individual modular design
n Industrial quality expansions
n Proper and efficient handling of material
On-off switch with control light

Continuous, accurate and
Allows set-up and auto-mode adjustable operating power
with set-up and auto-mode
llows proper, efficient

A
handling of material
Individual modular design Powerful 400 V / 1200 W drive
Connections for safety foot pedal, Quick expansion of large,

control wires for the expander thick-walled pipes
pistol H 1 and/or H 2 and quick
coupling for hydraulic hose
Suitable for all types

of expander heads
Multi-functional
Fine adjustment of the tube socket size
Industrial quality expansions
Set (No. 13100) includes: Electro-hydraulic expander system H 600 complete with
hydraulic unit H 600 (No. 13002), expander pistol H 1 (No. 12001), control cable, hy- Model kg g No.
draulic hose 2.5 m with circuit points, adjusting tool, tool rack (No. 13023), safety
foot pedal and hydraulic oil 1 l (No. 58185), without expander heads
Set (No. 13002) includes: Electro-hydraulic unit H 600 with safety foot pedal, adjus-
Hydraulic expander system H600 36.0 13100
ting tool, tool rack (No. 13023) and hydraulic oil 1 l (No. 58185), without expander Hydraulic unit H 600 33.1 13002
heads Safety foot pedal with 3 m cable 0.5 12013
1)
Expanding, hydraulic
Electro-hydraulic expander pistol H1
Product profile
Expander pistol H1
APPLICATION AREA (No. 12001)
Expander heads standard: Ø 8 - 42 mm, 5/16 - 1.3/4”

Expander heads type S: Ø 22 - 67 mm, 1 - 2.1/2”
(with adaptor No. 11007) max. wall thickness 2.5 mm
Adaptor (No. 11007)
Set includes: 2.5 m control cable (No. F88928), hydraulic hose (No. 12023),
adjusting tool (No. 12017), hydraulic oil 1 l (No. 58185) 4
Description kg g No.
Electro-hydraulic expander pistol H1 2.9 12001

Adaptor H1 / type S 0.6 11007
Adjusting tool for H1 0.9 12017
ACCESSORIES
Adaptor
(No. 12097)
Description kg g No.
Expander head H2 / type 2, 28 - 70 mm 2.5 12078 Adjusting tool

Expander head H2 / type 3, 70 - 110 mm 3.0 12080 (No. 12018)
Adaptor H2 / type S 1.1 12097
Adjusting tool for H2 0.9 12018
H 2 / type 3
H 2 / type 2
Custom-made products* Ø D1
Riveted expander heads H2
Only one head necessary for every pipe diameter.
L2
When ordering, please fill out form and state

L1
the applicable dimensions L1 / L2 / D1
Examples of a custom order
Expander adaptor type S Allows the use of the expander heads type S with
To increase the application area of the ROCAM copper pipe (soft) up to 67 mm and/or 2.1/2”!
expander power torque, expander pistol H1/H2,
expander A0/A1 and ROMAX expander compact
Model max. max. mm kg g No.
Adaptor type S, 67 mm and / or 2.1/2” 2.0 0.6 11007

without expander heads
Expander adaptor (No. 11007) for Expander adaptor (No. 12097) for
Adaptor H2 / type S 70 - 110 mm 1.1 12097
ROCAM expander power torque expander pistol H2
or expander pistol H1
* Availability, delivery time and price of custom products for other pipe
diameters available on request. 87
Accessories expanding
Expander head compatibility
Expander head Expander head Expander head Riveted Expander head Expander head Step
ROLOCK standard type S expander head PE-X H 2, type 2 and 3 expander head
ROLOCK expander
power torque
4
ROCAM expander
power torque
No. 12005
Expander A0
Expander A1
ROMAX expander
compact No. 15714
No. 15715 No. 15714 No. 15716

No. 15714
ROMAX expander
AC ECO MAXI
Expander pistol H1
Expander pistol H2
Fig. similar
Expander head can be used without adaptor Expander head can not be used Fig.: Can be used with the appropriate adaptor (pictured)
88
Expanding and extracting, manual
ROLOCK COMBI KIT
Made in Germany!
expander / tee-extractor The know-how from the pioneer of expanding
Practical, compact and cost-saving set combinations technology and the leading manufacturer of
expanding tools for over 50 years!
with ROLOCK expander power torque and
tee-extractors. For all common pipe dimensions
Ø 12 - 28 mm (1/2 - 1.1/8”)
Product profile KEY FEATURES
APPLICATION AREA
Q Toolless fine adjustment of the capillary gap
Q Reduces effort required and increases work space
Suitable for pipes made of: Q Up to 67% reduction of soldering materials and soldered joints
Copper, aluminium
and steel (soft): Ø 12 - 28 mm, 1/2 - 1.1/8”
Q Accurate drilling
KEY FEATURES
Q Saves resources by converting scrap pipes into fittings 4
Q Reliable pipe connections to DVGW standards
Q Increases safety by reducing the number of connections
Q Suitable for making branches even in confined spaces through
the compact design
Largest possible expansion size

EPT-Technology
and toolless adjustable capillary gap
Concealed bent lever
Professional extractions
Up to 67% reduction of
soldering materials and
soldered joints
Long handles
Reduces effort
required and
increases work space
Utilisation of material
Saves resources by converting

scrap pipes into fittings
UNIDRILL
Automatic 28/42
Accurate drilling
Scale and cam

depth adjustment
No. 21583 /
No. 21575
Extractor cam pincer
Limits insertion depth for

Ø 12 - 42 mm (1/2 - 1.5/8”)
No. 22080
ROLOCK COMBI KIT sets include: ROLOCK expander power torque (No. 12400),
ROLOCK expander heads, tee-extractor, special ratchet (No. 27180), adaptor
(No. 1500002894), UNIDRILL Automatic 28 (No. 21583), extractor cam pincer
(No. 22080), carrying case
g No.
ROLOCK COMBI KIT 12 - 15 - 18 - 22 mm 4.4 12601

ROLOCK COMBI KIT 12 - 14 - 16 - 18 mm 2.6 12602
ROLOCK COMBI KIT 1/2 - 5/8 - 7/8 - 1.1/8” 2.8 12604
ROLOCK COMBI KIT 1/2 - 3/4 - 1 2.5 12605
Fig. similar
89
Extracting, manual
Tee-extractor sets
Made in Germany!
For efficient production of T-branches The know-how from the pioneer of expanding
(extractions) for fitting-free pipe installations, technology and the leading manufacturer of
Ø 10 - 42 mm (3/8 - 2.1/8”) expanding tools for over 50 years!
Product profile
Suitable for pipes made of: Q E liminates the cost for T-pieces, purchase and storage of
Copper (soft, semi-hard, Ø 10 - 42 mm, 3/8 - 2.1/8” fittings
hard): max. wall thickness 2.5 mm Q Extractions even on installed pipes possible
Aluminium: Ø 10 - 42 mm, 3/8 - 2.1/8” Q Accurate drilling
max. wall thickness 2.5 mm Optimal positioning with the cam pincher depth adjustment
4 Precision steel: Ø 10 - 42 mm, 3/8 - 2.1/8”
Q
max. wall thickness 2.5 mm Scale and cam

depth adjustment
Extractor cam pincer
Limits insertion depth for

Ø 12 - 42 mm (1/2 - 1.5/8”)
No. 27180
Optimum capillary gap
Professional extractions
Limits the
insertion depth
UNIDRILL Automatic 28/42
Optimal positioning
Accurate drilling
No pipe removal
Extractions even on
installed pipes possible No. 21583 /
No. 21575
Tee-extractor sets include: tee-extractor according to chart, special ratchet (No. 27180),
adaptor (No. 1500002894), cam pincer (No. 22080) and special conical drill, UNIDRILL
Automatic 42 (No. 21575), carrying case
g No.
Tee-extractor set 12 - 15 - 18 - 22 mm 3.4 22100

Tee-extractor set 12 - 15 - 22 - 28 mm 3.6 22101
Tee-extractor set 12 - 15 - 18 - 22 - 28 mm 3.9 22103
Tee-extractor set 10 - 12 - 14 - 16 - 18 - 22 mm 3.7 22111
Tee-extractor set 12 - 15 - 18 - 22 - 28 - 35 - 42 mm 5.5 22126
Tee-extractor set 15 - 22 - 28 mm 3.6 22127
Tee-extractor set 1/2 - 5/8 - 3/4 - 7/8” 3.4 22121
Tee-extractor set 1/2 - 5/8 - 7/8 - 1.1/8” 3.7 22124
Tee-extractor set 1/2 - 3/4 - 1” 3.3 22135
Fig. similar
90
Extracting, manual
Tee-extractor
Tee-extractor with double V-block for accurate 90°
branches, Ø 10 - 54 mm (3/8 - 2.1/8”)
Product profile
Double V-block
KEY FEATURES
ccurate and firm
A
Q niform and proper material extraction without scratches
U positioning for exact
or burrs 90° branches
Q Burr-free operation with the specially polished extractor hooks
Q Easy insertion into the drilled hole with the special trapezoidal
screw thread
Q Accurate and firm positioning for exact 90° branches
Specially polished, forged
and tempered extractor hooks 4
Burr-free operation
Special hook design
Drill Ø Easy insertion into the drilled hole

mm / inch mm mm mm kg g No.
Ratchet adaptor (No. F80053 and F80054) with
10 1.0 6 11 130 22010 No. 22050 / 22054 included in scope of delivery
12 1.0 7 11 150 22012 (square, 3/4”)
14 1.0 8 11 160 22014
15 1.0 8 11 160 22015 Drill Ø
16 1.0 8 11 220 22016 mm / inch mm mm mm kg g No.
18 2.0 10 11 220 22018
28 2.5 15 11 470 22028 1” 2.5 14 11 470 22064
35 2.5 22 11 700 22035 1.1/8” 2.5 15 11 480 22065
38 2.5 22 11 700 22038 1.1/4” 2.5 19 11 700 22066
42 2.5 26 11 890 22042 1.3/8” 2.5 22 11 700 22035
54 2.5 30 19 1,380 22054 1.1/2” 2.5 22 11 700 22038
3/8” 1.0 6 11 110 22060 1.5/8” 2.5 26 11 900 22068
1/2” 1.0 7 11 140 22061 2” 2.5 30 19 1,380 22050
5/8” 1.0 8 11 220 22016 2.1/8” 2.5 30 19 1,380 22054
3/4” 2.0 10 11 220 22062 Accessories
7/8” 2.0 12 11 350 22063 Socket 19 mm F80053
Square connection 3/4” F80054
hexagon square
Spare extractor hooks

mm kg g No. inch kg g No. Hooks, specially polished, tempered from
10 60 1300005045 3/8” 60 1300005058 Ø 10 - 54 mm (3/8 - 2.1/8”)
12 70 1300005046 1/2” 70 1300005059
14 90 1300005047 5/8” 140 1300005049
15 90 1300005048 3/4” 140 1300005060
16 140 1300005049 7/8” 200 1300005061
18 140 1300005050 1” 210 1300005062
22 210 1300005051 1.1/8” 220 1300005063
28 220 1300005052 1.1/4” 270 1300005064
35 290 1300005054 1.3/8” 290 1300005054
38 290 1300005055 1.1/2” 290 1300005055
42 320 1300005056 1.5/8” 320 1300005065
Note: For copper pipes (soft), the use of an
54 560 1300005057 2” 520 1300005067
extractor support is recommended! ( 95)
2.1/8” 560 1300005057
Precise drilling of the pipe Insert extractor hook into the Using the ratchet, turn the extractor to After extraction, set correct
without a centre punch – drill stop drilled hole and screw the bell firmly the left, while paying attention that the insertion depth (dependant on pipe
prevents perforation of the pipe against the drill hole V-block is seated securely Ø) with cam pincer
Simply calibrate the tee Ø on the UNIDRILL Automatic and the drilled hole Ø will automatically correspond to the extractor hook required.
91
Accessories extracting, manual
Tee-extractor ratchet Extractor cam pincer
Chrome vanadium steel, fine toothed and right / left reversible
KEY FEATURES
n Identification point marks insertion depth
exactly and prevents over-insertion
n Cam depth adjustment wheel with scale
No. 27180
Fig. similar
4
No. 1500002894
Adaptor for the use with extractor
No. 27181
Model SW kg g No. mm inch mm kg g No.
10 - 42 mm, 3/8 - 1.3/4” 3/4” 435 27180 12 - 42 1/2 - 1.5/8” 150 170 22080
50 - 54 mm, 2 - 2.1/8” 3/4” 1,140 27181

HSS special conical drill
KEY FEATURES
n Fast, burr-free drilling
n Precise location without need for centre punch special drill tip
n Calibrated drill Ø automatically corresponds to the correct
extractor hook and branch size
n Drill stop prevents damage to pipe walls
Accurate drilling
No. 21583 No. 21575

Model mm inch SWkg g No.
UNIDRILL 28 10 - 28 3/8 - 1.1/8” 11 110 21583

UNIDRILL 42 10 - 42 3/8 - 1.5/8” 11 430 21575
92
Flaring
Precision double flaring press DB 10 Formation of the various flares made possible with
the appropriate flaring attachments
For standard precision expands according to DIN 74234
Ø 4.75 - 10 mm, wall thickness 0.7 - 1.0 mm E- contour, simple flare:
n Standard flaring contour
Product profile
D-contour, double flare: 1.
APPLICATION AREA
n Extension of brake and/or
On copper, aluminium and steel pipes, seamless pipes and
hydraulic lines
double-walled pipes, for example Bundy pipe and KUNIFER
n Connection by means of
brake pipes
coupling rings, sealed by
KEY FEATURES means of flaring surface 1. 2.
Q Ideal for endless pipes
Q For several flaring profiles, wall thickness 0.7 - 1.0 mm 180° flares:
Q Universal use with the pluggable pressure cone n Mounting using 180°
4
Q Accurate and reproducible results coupling ring, for example
hydraulic transmission valve
Q Clamping block for several pipe diameters
and/or distributor block 1.
Q Reliable hold with the 25 mm pipe clamping length n Seal between drill-hole and
Q Suitable for clamping in a vice flaring surface
Integrated depth stop
Accurate and reproducible results

Pluggable pressure cone
Clamping block
Universally insertable
For several pipe diameters
Flange length
Reliable hold with the

25 mm pipe clamping length
Pluggable flaring attachments
For several flaring profiles up to

a wall thickness of 0.7 - 1.0 mm
Horizontal clamping
Applicable for endless pipes
No. 26010 No. 26011
No. 26016 No. 26015 No. 26017
No. 26001 No. 26002 No. 26003 No. 26004 No. 26005
Set (No. 26013) includes: basic tool with pressure cone (No. 26010),
flaring attachments, 1 set of clamping blocks (No. 26011)
Description mm kg g No. Description mm kg g No.
DB 10 set 4.75 - 5 - 6 - 8 - 9 - 10 mm 2.64 26013 Pressure cone 20 26010

Flaring attachment 4.75 / 5 mm 0.20 26001 Clamping spindle 90 26015
Flaring attachment 6 mm 0.20 26002 Flaring spindle 300 26016
Flaring attachment 8 mm 0.20 26003 Distance bolt 30 26017
Flaring attachment 9 mm 0.20 26004 Set of clamping blocks (2 pcs.) for pipes 190 26011
Flaring attachment 10 mm 0.20 26005 4.75 - 5 - 6 - 8 - 9 - 10 mm
93
Flaring
ROFLARE REVOLVER Flaring come
off-centre
Revolver reeling flaring tool
For the reliable and fast production of standard single 45° flares Mould
in accordance with EN 14276-2 and JIS B8607:2008 on copper soft

pipes Ø 6 - 18 mm and 1/4 - 3/4” E-contour
single flare
Product profile
KEY FEATURES
n Guaranteed norm flares
n Produces leak free joints
n One-handed quick clamping system
n Automatic depth stop: perfect positioning of the pipe
to the flaring cone
4
Adaptor attachment
For ratchet and electric drive
Spring loaded safety clutch
No reduction of wall thickness
High-quality revolver die
Highest fitting accuracy

with long service life
Recuperating spring Optimized rubber handle
Automatic support to pull back Durable and slip-proof

the flexible revolver die
Automatic depth stop:

Set (No. 1000000230) includes: ROFLARE REVOLVER metric incl. ratchet adaptor, dies
Compact design enables use perfect positioning of the pipe
Ø 6, 8, 10, 12, 16 and 18 mm, pipe cutter ROTRAC 28 PLUS chrome limited edition
in confined spaces to the flare cone
(No. 1000000046), ROCASE 4212 (No. 1300003334)
Set (No. 1000000231) includes: ROFLARE REVOLVER imperial incl. ratchet adaptor,
dies Ø 1/4 , 5/16, 3/8, 1/2, 5/8 and 3/4”, pipe cutter ROTRAC 28 PLUS chrome limited
edition (No. 1000000046), ROCASE 4212 (No. 1300003334)
Description No.
Set, metric with ROTRAC 28 PLUS chrome 1000000230

limited edition
Set, imperial with ROTRAC 28 PLUS chrome 1000000231
limited edition
Metric, Ø 6, 8, 10, 12, 16, 18 mm 1000000222
Imperial, Ø 1/4 , 5/16, 3/8, 1/2, 5/8, 3/4” 1000000223
94
Flaring
Reeling flaring tool Flaring come
off-centre
For producing precise 45° single flares on copper pipes
Ø 6 - 18 mm (1/8 - 3/4”) Mould
E-contour
Product profile single flare
KEY FEATURES
Q Controlled expanding and shaping of the pipe without tearing
Q No reduction in wall thickness
Q No slipping of the pipe
Q Sturdy and long lasting
No. 222401, No. 222402,

Square connection
No. 222403
For manual operation, for example
cordless screwdriver
Spring-loaded slide coupling
No reduction in wall thickness Made from forged steel
Robust and long-lasting
Flare cone rotates off-centre

in needle bearings
Controlled expanding and

shaping of the pipe end
without tearing
Self-centring die
Highest flare precision
Adaptor for
cordless screwdriver
Die available in metric

and imperial sizes
Pipe will not slip
Fig. similar
Reeling flaring tool set includes: reeling flaring tool in plastic case
with mould in metric and/or imperial format
Model mm / inch No.
Set EB 6 - 8 - 10 - 12 - 14 - 15 - 16 - 18 mm 222401
1/8 - 3/16 - 1/4 - 5/16 - 3/8 - 1/2 - 5/8 - 3/4”
Set EB 1/8 - 3/16 - 1/4 - 5/16 - 3/8 - 1/2 - 5/8 - 3/4” 222402
Set EB 6 - 8 - 10 - 12 - 14 - 15 - 16 - 18 mm 222403
Dies
Metric 6 - 8 - 10 - 12 - 14 - 15 - 16 - 18 mm 222413
Imperial 1/8 - 3/16 - 1/4 - 5/16 - 3/8 - 1/2 - 5/8 - 3/4” 222412
95
Flaring
Universal flaring tool
Flaring cone
For producing precise 45° single flares on copper centre
pipes Ø 4 - 16 mm (3/16 - 5/8”)
n niversal application and highest flare precision through self-
U Mould
centring pipe clamp for all diameters E-contour
single flare
n Controlled flaring without tearing, forming perfect surfaces
n Hardened flare cone with special geometry
Universal flaring tool set (No. 222601) includes: universal flaring tool for pipe
diameters 4 - 16 mm, 3/16 - 5/8”, in plastic case
Set EB 4 - 16 mm 3/16 - 5/8” 900 222601
Flaring and bending set

Universal application in industry and small
trade by sanitary and heating installations,
refrigeration and air-conditioning technology,
auto and hydraulic technology
Fig. similar
Flaring and bending set (No. 26020) includes: MINICUT I, Ø 3 - 16 mm (No. 70401),
internal and external deburrer, Ø 4 - 36 mm (No. 11006), double flare press DB 10
(No. 26013), TUBE BENDER set, Ø 4.75 - 10 mm (No. 24112)
Model mm kg g No.
Flaring / bending set 4.75 - 5 - 6 - 8 - 9 - 10 5.5 26020
96
Torque wrench
ROTORQUE AIRCON / REFRIGERATION Connection 9 x 12
Head can be exchanged between

Step-less torque wrench ROTORQUE AIRCON and
ROTORQUE REFRIGERATION All-In-One: one
Product profile
head fits all sizes!
APPLICATION AREA
Self-locking rack and pinion drive enables quick and reliable
fastening of flare nuts sizes 15 - 32 mm in accordance with
EN 378-2:2012-08
KEY FEATURES
Q Always fits, covers all flare nut sizes from 15 - 32 mm
Q Won‘t slip thanks to the self-locking rack and pinion drive
and ratchet function
Q Simple and reliable: required torque in accordance with 4
EN 378-2:2012-08 is embossed on the head for every size
and can not be rubbed off
Q Embossed torque data: easy tightening according to norm
Q ROTORQUE REFRIGERATION is suitable for cylinder
The torque can
heads‘ work be read off
Always tighten
according to the standard
Closed head Fully opened head

ROTORQUE AIRCON ROTORQUE REFRIGERATION
torque wrench torque wrench
Q 10 – 110 Nm Q 10 – 70 Nm
Q ± 4% accuracy Q ± 3% accuracy
Q 1 Nm adjustment steps Q 1/2 Nm adjustment steps
Q Suitable for cylinder heads’ work
Fig. ROTORQUE AIRCON torque wrench

ROTORQUE sets include: torque wrench, head, carrying bag
Model kg g No.
ROTORQUE AIRCON 1.5 1000000224

ROTORQUE REFRIGERATION 1.4 1000000225 Fig. ROTORQUE REFRIGERATION torque wrench
Torque wrench set

For proper tightening of flange connections
Set with adjustable torque wrench (10-70 Nm) and 6 spanner inserts
sizes 17, 22, 24, 26, 27 and 29 mm for flange connections on 1/4”,
3/8”, 1/2” and 5/8” pipe lines according to DIN EN 378-2 : 2012-08
Fix with torque
urgently necessary!
7 pieces set (No. 175001) includes: spanner wrench sizes 17, 22, 24, 26, 27, 29 mm,
torque wrench, carrying bag
Pipe-Ø Spanner width Locking torque
1/4” / 6 mm 17 mm 14 -18 Nm
3/8” / 10 mm 22 mm 33-42 Nm
1/2” / 12 mm 24 mm 50-62 Nm
1/2” / 12 mm 26 mm 50-62 Nm
5/8” / 15/16 mm 27 mm 63-77 Nm
5/8” / 15/16 mm 29 mm 63-77 Nm
Model kg g No.
Fig. similar Torque wrench set, 7 pcs. 3.5 175001
97
5
98
Pressing
Press machine compact 102 - 103
›B‹ MaxiPro press system 104 - 105
Press machines standard 106 - 109
DURA LAZR TEC 110
Press jaws compact 111 - 112
Press jaws standard 112 - 113 5
Press chains standard 114
Overview press jaws 115 - 116
Pressnavigator app 116
Overview system approvals 116 - 121
99
Pressing
System overview
Press machines
ROMAX Compact TT ROMAX 4000 ROMAX 3000 AC ROMAX AC ECO
(Twin Turbo)
1)
Operation mode: Electro-hydraulic Electro-hydraulic Electro-hydraulic Electro-hydraulic
Jaw fixture rotatable: 270° 270° 270° 270°
Constant Force Technology (CFT):    

5
Controlled press cycle:    –
Piston force / hub: 19 kN / 30 mm 32 kN / 40 mm 32 kN / 40 mm 32 kN / 40 mm
Service interval: 40,000 pressings 40,000 pressings 20,000 pressings 10,000 pressings
LED:    –
Approx. pressing cycle time: 3s 5s 5s 7s
Cable length: – – 5m 5m
Weight: 2.5 kg 3.6 kg 3.8 kg 4.5 kg
Battery:   – –
Page: 102 - 103 106 - 107 108 109
ROTHENBERGER Constant Force Technology Cordless Alliance System

The CFT guarantees a constant axial pressing force over the entire service interval. Q 100% compatibility of machines, battery packs
A very important requirement for the production of sealed press connections. and chargers – cross-manufacturer
Q World's most powerful battery pack system

with 30 years of battery pack competence
CFT guarantees: from Metabo
ROMAX Compact TT 19 kN / 40,000 press cycles Q Maximum reliability, clear cost advantages
ROMAX 4000 32 kN / 40,000 press cycles and high investment reliability.
ROMAX 3000 AC 32 kN / 20,000 press cycles
Q Cordless Alliance System (CAS) is an alliance
ROMAX AC ECO 32 kN / 10,000 press cycles of leading power tool brands.
Q AS partner: ROTHENBERGER, Metabo,

C
Mafell, Collomix, Eibenstock, Eisenblätter,
Haaga, Starmix, Steinel, Rokamat, Birchmeier,
Constant Force Technology Edding, Fischer, Prebena, Cembre, Pressfit
Measurement under load – UPONOR NW 75 and Jöst.
2)
40
Force [kN]
30
0
0 Press cycles 1000
1)
100 2)
More information at cordless-alliance-system.com
Pressing
System overview
Press jaws / press chains
Press jaws Interchangeable Press jaws 3-elemental Press chains

compact press jaws standard press jaws standard
compact
ROTHENBERGER
Pressnavigator
Working range metal: Ø 12 - 35 mm – Ø 12 - 54 mm Ø 42 - 54 mm Ø 42 - 54 mm
Working range multi-layer: Ø 12 - 40 mm Ø 12 - 32 mm Ø 12 - 40 mm Ø 50 - 63 mm Ø 40 - 110 mm
Snap on: – – – –  5
DURA LAZR TEC:  –   
Long-term corrosion prot.:     
3-bolt synch. mechanism:     –
Precision-manufactured
contour:     
Fits to ›B‹ MaxiPro
fitting system:  
– – –
Suiteable for all press machines

with a compatible press jaw fixture 19 – 21 kN 19 – 21 kN 32 – 34 kN 32 – 34 kN 32 – 34 kN
and a constant axial thrust of:
Page: 111 112 112 113 114
No system commitment Controlled press cycle Electronic control

Users are free to decide which fitting systems After reaching a predetermined pressing force The electronics of the ROMAX Compact TT,
they want to press. They are also free to the press cycle switches off automatically. ROMAX 4000 and ROMAX 3000 AC provide
choose the manufacturer of the press ma- The piston retracts after the necessary pres- for a safe pressing cycle:
chines and press tools. There is no legal pro- sing force has been reached. This guarantees
vision, DIN standard or other provision - for uniform and reliable pressings as leading Q ontrol of the battery charge status
C
example, a regulation established by means system manufacturers require. Q Safety start-inhibitor when the battery
of a DVGW worksheet - which obligates the
is too low
tradesmen to exclusively use the press tools
or press jaws of just one fitting or piping
Q LED display of the service interval and
system manufacturer. any error messages
The only decisive factor is whether the fitting

system and pressing tool are suitable for one
another - only in this case is the tightness
guaranteed. The Pressnavigator app provi-
des guidance by enabling users to find the
suitable press tool for the fitting system, or
the suitable fitting system for the press tool.
101
Pressing
Press machine compact
ROMAX Compact TT (TWIN TURBO) 1) 2)
Electro-hydraulic press machine for battery operated

pressing of fittings up to Ø 40 mm (plastic / multi-layer)
and / or up to Ø 35 mm (metal) with 19 kN.
Product profile
The ROMAX Compact TT is 3 seconds fast, 2.5 kg light and 19 kN Dimension: 336 x 143 x 76 mm (w/ 2.0 Ah battery)
strong. Through the perfect handling, the machine is particularly Weight: Approx. 2.5 kg (without press jaw)
suitable for domestic installations, high volume pressings or service Piston force / hub: 19 kN / 30 mm
installations.
Nominal size: Ø 12 - 40 mm plastic / multi-layer
COMPATIBLE PRESSING TOOLS Ø 12 - 35 mm metal
Q P ress jaws: Service interval: 40,000 pressings / 2 years
ROTHENBERGER press jaws compact starting on page 111 Press jaw fixture: 270° rotation
Q Interchangeable press jaws: Power supply: RO BP 18 V / 2.0 Ah Li-Ion battery
ROTHENBERGER interchangeable press jaws starting on page 112 RO BP 18 V / 4.0 Ah Li-Ion battery
Operating temperature: -10 °C up to 60 °C
5 Pressings: Approx. 130 press cycles with 2.0 Ah
battery tested with SV18 stainless steel
fittings
270° rotatable jaw fixture

Twin Turbo Design For easy use in confined spaces
Perfectly balanced weight
distribution
Lightweight and easy to handle
The press machine is 34 cm short and

weighs only 2.5 kg
Automatic controlled press cycles
Piston retracts after reaching the

necessary pressing force
Turbo Pressure
Pressing of metal fittings up to

Ø 35 mm within 3 seconds
Constant Force Technology (CFT)
For constant pressing force
When unused or during preassembly, the The ROMAX Compact TT hanging Secondary effect of the two cylinder-structure: The
machine stands stably on the workbench. from a ladder by the shoulder strap. machine can be used with one hand.
1)
102 2)
Pressing
Press machine compact
ROMAX Compact TT sets
Twin Turbo: What‘s behind it?

BALANCE
Q The engine and the gear are located opposite the hydraulic system
Q Perfectly balanced weight distribution
SIZE
Q Installing components in two cylinders reduces the size of the
machine
Q The two-cylinder shape saves 15% of the length
POWER
Q Every press cycle takes only 3 seconds
Q The new pressure heart enables pressing of metal fittings up
to Ø 35 mm
Twin Turbo for high volume pressing Twin Turbo for domestic installations Twin Turbo for service installations
Basic set 1 EU (No. 1000002115) includes: ROMAX Compact TT press machine, 1x RO BP 18 V / 2.0 Ah Li-ion battery (No. 1000001652),
RO BC battery charger EU (No. 1000001654), ROCASE case system 4414, without press jaws
Model Press jaws Ø mm kg g

No.
ROMAX Compact TT bare tool without press jaws/battery/charger 4.2 1000002809

ROMAX Compact TT basic set 1, 1x 2.0 Ah, EU without press jaws 4.9 1000002115
ROMAX Compact TT basic set 1, 1x 2.0 Ah, UK without press jaws 4.9 1000002123
ROMAX Compact TT basic set 2, 2x 2.0 Ah, EU without press jaws 5.3 1000002116
ROMAX Compact TT press jaw set SV, 1x 2.0 Ah, EU 15 - 22 - 28 8.6 1000002117
ROMAX Compact TT press jaw set M, 1x 2.0 Ah, EU 15 - 22 - 28 8.6 1000002118
ROMAX Compact TT press jaw set M, 1x 2.0 Ah, UK 15 - 22 - 28 8.6 1000002124
ROMAX Compact TT press jaw set TH, 1x 2.0 Ah, EU 16 - 20 - 26 8.8 1000002120
ROMAX Compact TT press jaw set U, 1x 2.0 Ah, EU 16 - 20 - 25 8.6 1000002119
ROMAX Compact TT interchangeable press jaw set TH, 1x 2.0 Ah, EU 16 - 20 - 26 - 32 6.9 1000002113
ROMAX Compact TT interchangeable press jaw set U, 1x 2.0 Ah, EU 16 - 20 - 25 - 32 6.9 1000002112
ROMAX Compact TT interchangeable press jaw set RFz, 1x 2.0 Ah, EU 16 - 20 - 25 - 32 6.9 1000002111
ROMAX Compact TT interchangeable press jaw set CO, 1x 2.0 Ah, EU 12 - 16 - 20 - 25 6.9 1000002114
ACCESSORIES
Model No.
RO BP 18V / 2.0 Ah Li-Ion battery 1000001652

RO BP 18V / 4.0 Ah Li-HD battery 1000002548
RO BC 14/36, battery charger, EU 1000001654
RO BC 14/36, battery charger, UK 1000001691
ROCASE 4414 for press jaws 1000002242
ROCASE 4414 for interchangeable inserts 1000002307
Press jaws & interchangeable press jaws starting on 110
103
Pressing
›B‹ MaxiPro press system
›B‹ MaxiPro: Join the press revolution! DURA
LAZR
TEC
An innovative press system suitable for air-conditioning
LASER HARDENING
ROTHENBERGER
and refrigeration applications consisting of ›B‹ MaxiPro

fittings from Conex | Bänninger and suitable press jaws
and press machines from ROTHENBERGER.
Product profile
TIGHT CONNECTIONS UP TO 48 BAR TECHNICAL DATA
Q The O-ring is resistant against several oils including ester oil.* Application: Air-conditioning and refrigeration
Q The 3-point press, one on each side of the bead and one press Connections: Copper to copper
compressing the O-ring, provides a permanent and secure joint.
Fitting / tube range: 1/4”, 3/8”, 1/2”, 5/8”, 3/4”, 7/8”,
THE ADVANTAGES 1”, 1.1/8”
Q Only 3 seconds per joint completion O-ring: HNBR
Q Saves approx. 3 minutes per connection Max. operating pressure: 48 bar / 4,800 kPa / 700 psig

Q Flame-free joint, no hot work permit needed

Leak tightness: Helium ≤ 7.5 x 10 -7 Pa.m3/s at
Q No need for nitrogen purge +20 °C, 10 bar
5 MADE-TO-LAST THROUGH LASER HARDENING Vacuum: 200 microns
›B‹ MaxiPro press jaws are partially laser-hardened. This Operating temperature: -40 °C up to 140 °C
makes them particularly durable in those places that take the UL listing continues
most pressure. Laser hardening increases the jaws’ durability operating temperature: 121 °C
considerably.
Compatible refrigerants: R32, R134a, R404A, R407C, R407F,
R410A, R507, R1234ze, R1234yf,
R718, R450A, R513A, R448A,
R449A, R407A, R427A, R438A,
R417A and R422D
Approved tube: For full information, please visit
conexbanninger.com
Approvals, standards For full information, please visit
and test compliance: conexbanninger.com
3-POINT PRESS TECHNOLOGY

Press jaw for ROMAX Compact TT Press jaw for ROMAX 4000
No. 1000001751 No. 1000001891 Three press points: one on each side of the bead and
one compressing the O-ring for a permanent and secure joint
Hock
HNBR O-ring
Fitting socket
Bead
Tube stop
Set (No. 1000002121) includes: ROMAX Compact TT press machine, 1x RO BP 18 V / 2.0 Ah battery (No. 1000001652), RO BC battery charger EU (No. 1000001654),
8x ›B‹ MaxiPro press jaws (No. see below), TC 35 (No. 70027), internal / external deburrer (No. 1500000237), UNIGRAT pencil deburrer (No. 21660),
ROVLIES cleaning pads (No. 45268), depth gauge (No. 1000002400), 2x ROCASE 4414 case system
Model Press jaws Ø inch kg g

No.
ROMAX Compact TT + ›B‹ MaxiPro press jaw compact set 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1.1/8” 21.2 1000002121
1/4”–1.1/8” + hand tools, EU
ROMAX Compact TT + ›B‹ MaxiPro press jaw compact set 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1.1/8” 21.2 1000002125
1/4”–1.1/8” + hand tools, UK
›B‹ MaxiPro press jaw compact set 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1.1/8” 14.0 1000001989
1/4”–1.1/8” + hand tools
ROMAX 4000 + ›B‹ MaxiPro press jaw standard set 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1.1/8” 24.3 1000002945
1/4”–1.1/8” + hand tools, EU
ROMAX 4000 + ›B‹ MaxiPro press jaw standard set 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1.1/8” 24.3 1000002946
1/4”–1.1/8” + hand tools, UK
›B‹ MaxiPro press jaw standard set 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 1.1/8” 18.1 1000002207
1/4”–1.1/8” + hand tools
* More information at conexbanninger.com

104
Pressing
›B‹ MaxiPro press system
How to install the ›B‹ MaxiPro system?
›B‹ MaxiPro benefits from a 3-point radial press – three press points, one on each side of the bead and one press
compressing the O-ring. This provides a permanent and secure joint. ›B‹ MaxiPro is a mechanical joint, thus elimina-
ting the need for nitrogen purge during the jointing process.
1. Cut the tube to length. 2. Deburr and remove all external sharp edges. 3. Use a pencil deburrer on internal edges.
4. Clean the tube end with a circular movement,

avoiding grooves that run parallel to the tube. 5. Check for defects. 6. Ensure the O-ring is seated.
5
7. Mark insertion depth using depth gauge and 8. Align jaws squarely on the fitting and complete
insert tube fully into the fitting. the joint. 9. Mark the completed joint.
Please note: To ensure a safe and tight connection please follow the detailed ›B‹ MaxiPro installation process.
For more information, please visit the Conex | Bänninger website: conexbanninger.com
ACCESSORIES
Model No.

RO BC14/36, battery charger, EU 1000001654
RO BC14/36, battery charger, UK 1000001691
ROCASE 4414 case system 1000001786
for ›B‹ MaxiPro compact press jaws
ROCASE 4414 case system 1000001898
for ›B‹ MaxiPro standard press jaws
TUBE CUTTER 35 DURAMAG 4 70027
Internal / external deburrer Ø 6–35 mm 1500000237
UNIGRAT pencil deburrer 10 21660
with HSS deburring blade
ROVLIES cleaning pads (1 x 10 pads) 45268
Depth gauge ›B‹ MaxiPro 1000002400
105
Pressing
Press machines standard
ROMAX 4000 1) 2)
Electro-hydraulic radial battery-powered press machine

for system depending pressing of fittings up to Ø 110
mm with 32 - 34 kN.
Product profile
The ROMAX 4000 operates in just 5 seconds, weighs only Dimensions: 467 x 125 x 80 mm (w/ 4.0 Ah battery)
3.6 kg and uses a force of 32 kN. It can press from 12 mm to 445 x 125 x 75 mm (w/ 2.0 Ah battery)
110 mm depending on the system and is therefore the perfect Weight: Approx. 3.6 kg (without press jaw)
all-rounder amongst the ROTHENBERGER press machines.
Piston force / hub: 32 - 34 kN / 40 mm
COMPATIBLE PRESSING TOOLS Nominal size: Ø 12 - 110 mm
Q P ress jaws: Service interval: 40,000 pressings / 2 years
ROTHENBERGER press jaws standard starting on page 112 Press jaw fixture: 270° rotation
and 3-elemental standard press jaws starting on page 113 Power supply: RO BP 18 V / 2.0 Ah Li-ion battery
Q Press chains: RO BP 18 V / 4.0 Ah Li-ion battery
ROTHENBERGER press chains standard starting on page 114 Operating temperature: -10 °C up to 60 °C
5 Pressings: Up to 240 times (with 4.0 Ah battery)
(with SV 18 copper) Up to 105 times (with 2.0 Ah battery)
Fast and powerful pressings
Pressed in 5 seconds with 32 - 34 kN
Lightweight
The machine weighs

only 3.6 kg
Automatic controlled press cycles
Rod-shape Piston retracts after reaching

the necessary pressing force
Perfectly balanced weight
distribution enables users to
work comfortably 270° rotatable press jaw fixture
Up to 41% more For easy operation even in
pressing cycles* Constant Force Technology (CFT) confined spaces
For constant axial pressing force
Enter a new dimension of efficiency!

+ 41%
Number of pressing cycles
Q Powerful 18 V / 4.0 Ah battery pack

• Up to
Q Up to 41% more pressing cycles* 4.0 Ah
41% ROMAX 4000
Q Up to 33% more capacity due to enhanced more
system efficiency* pressing
cycles*
Q All this without a cord-maximum efficiency
and on-site freedom for you! + 33%
3.0 Ah
ROMAX 3000 • Up to
33%
more
Others capacity by
highest
system
efficiency*
* Tested with SV 18 copper fittings /
in comparison with ROMAX 3000
Battery capacity
1)
106 2)
Pressing
ROMAX 4000 sets
66% faster charging
In comparison to the ROMAX 3000
Intelligent battery-management
One battery. Several devices.

Full flexibility!
Charge indicator
To control the status of charge
Productive working due to expanded Cordless Alliance System:

Ergonomic working with the ROMAX 4000 service interval One battery system for more than 140 tools
Basic set 1 EU (No. 1000001840) includes: ROMAX 4000 Press machine, 1x RO BP 18 V / 4.0 Ah battery (No. 1000001653),
RO BC battery charger EU (No. 1000001654), ROCASE case system 6414, without press jaws
Model Press jaws Ø mm kg g No.
ROMAX 4000 bare tool without press jaws/battery/charger 5.9 1000002683

ROMAX 4000 basic set 1, 1x 4.0 Ah, EU without press jaws 7.0 1000001840
ROMAX 4000 basic set 1, 1x 4.0 Ah, UK without press jaws 7.0 1000001856
ROMAX 4000 basic set 2, 1x 4.0 Ah, 1x 2.0 Ah, EU without press jaws 8.0 1000001923
ROMAX 4000 press jaw set SV, 1x 4.0 Ah, EU 15 - 22 - 28 15.0 1000001924
ROMAX 4000 press jaw set M, 1x 4.0 Ah, EU 15 - 22 - 28 15.0 1000001927
ROMAX 4000 press jaw set M, 1x 4.0 Ah, UK 15 - 22 - 28 15.0 1000001932
ROMAX 4000 press jaw set TH, 1x 4.0 Ah, EU 16 - 20 - 26 15.0 1000001925
ROMAX 4000 press jaw set U, 1x 4.0 Ah, EU 16 - 20 - 25 15.0 1000001926
ACCESSORIES
Model No.

RO BC14/36, battery charger, EU 1000001654
RO BC14/36, battery charger, UK 1000001691
ROCASE 6414, empty 1000001879
Press jaws & press chains starting on 110
107
Pressing
ROMAX 3000 AC 1)
Electro-hydraulic press machine with mains operation

for system dependent pressing of fittings up to Ø 110
mm with 32 - 34 kN.
Product profile
The ROMAX 3000 AC is fast, light, easy to handle and Dimensions: 460 x 120 x 90 mm
safe. It is therefore ideally suited for the batch production of Weight: approx. 3.8 kg (without press jaw)
fitting joints in field operation. Piston force / hub: 32 kN / 40 mm
Q Batch production possible due to mains operation
Nominal size: Ø 12 - 110 mm2)
(5 m cable length) Service interval: 20,000 pressings / 2 years
Q A pressing cycle only lasts approx. 5 seconds
Press jaw fixture: 270° rotation
Q Constant Force Technology (CFT) guarantees the necessary
Power supply: 230 V / 50-60 Hz
pressing force 110 V on request
Q Extremely low weight as well as a balanced weight distribution
Operating temperature: -15 °C up to 60 °C
Q Highest quality, service interval of 20,000 pressing cycles
COMPATIBLE PRESSING TOOLS
5 Q Expanded operating temperature from -15 °C up to 60 °C
Q The compact, wand-like design allows pressings even in Press jaws: ROTHENBERGER standard press jaws,
confined spaces compatible with many other
manufacturers starting page 112
Press chains: ROTHENBERGER standard press
chains starting on page 114
Safety lock
No unintentional
opening because a 180°
rotation is necessary
Ergonomic use
Compatible jaw fixture
Suitable for many press jaws

270° rotatable jaw fixture
For easy use in confined spaces
Batch production possible Slim design
5 m cable length
Large operations radius
Set (No. 1000001001) includes: ROMAX 3000 AC, 230 Volt, ROCASE 6414, without
press jaws
Model No.
ROMAX 3000 AC basic set 1000001001
ACCESSORIES
Model No.
ROCASE 6414 with inlay ROMAX 3000 AC 1000001877

1)
2) system dependent
Pressing
ROMAX AC ECO 1)
Electro-hydraulic press machine with mains operation

for system dependent pressing of fittings up to Ø 110
mm with 32 - 34 kN.
Product Profile
The ROMAX AC ECOis fast, light, easy to handle and safe. Dimensions: 415 x 180 x 80 mm
It is therefore ideally suited for the batch production of fitting Weight: approx. 4.5 kg (without press jaw)
joints in field operation. Piston force / hub: 32 kN / 40 mm
KEY FEATURES Nominal size: Ø 12 - 110 mm2)
Service interval: 10,000 pressings / 2 years
Q E rgonomic thanks to the rubberized handle and balanced
weight distribution Press jaw fixture: 270° rotation
Q Controlled press cycle Power supply: 230 V / 50-60 Hz
Q Constant Force Technology (CFT) guarantees the necessary 110 V on request
pressing force COMPATIBLE PRESSING TOOLS
Q Safety lock guarantees no unintentional opening because a
180° rotation is necessary Press jaws: ROTHENBERGER standard press jaws, 5
compatible with many other
Q Emergency stop switch for immediate interruption of the feed
manufacturers starting on page 112
Q 5 m cable for a large operations radius
Press chains: ROTHENBERGER standard press
chains starting on page 114
270° rotatable jaw fixture Safety lock
For easy use in confined spaces No unintentional

opening because a 180°
rotation is necessary
Compatible jaw fixture
Suitable for many press jaws
Emergency stop switch
Immediate interruption
of the feed
Ergonomic use
Constant Force Technology (CFT)

5 m cable length
For constant axial pressing force
Large operations radius Fig. ROMAX AC ECO basic set
Set (No. 15705) includes: ROMAX AC ECO (230 Volt) ROCASE 6414 (No. 1000001959), without press jaws
Model Description Press jaws Ø mm kg g No.
ROMAX AC ECO basic set in ROCASE 6414 without press jaws 8.9 15705
ROMAX AC ECO press jaw set SV Basic set with press jaws type SV (Viega et al.) 15 - 22 - 28 13.4 15740
ROMAX AC ECO press jaw set M Basic set with press jaws type M (Mapress et al.) 15 - 22 - 28 13.4 15750
ROMAX AC ECO press jaw set TH Basic set with press jaws type TH (Henco et al.) 16 - 20 - 26 13.4 15730
ROMAX AC ECO press jaw set U Basic set with press jaws type U (UNICOR et al.) 16 - 20 - 25 13.4 15760
ACCESSORIES
ModelNo.
ROCASE 6414 with inlay ROMAX AC ECO 1000001959

1)
C
2)
system dependent
Pressing
DURA LAZER TEC
DURA LAZR TEC
The unique laser-hardening process
Long-lasting. Safe. Precise. Our DURA LAZR TEC press jaws set is Depth distribution of hardness was tested by the
a new industry standard. The unique ROTHENBERGER laser-hardening independent test laboratory of the State Materials
process, which is implemented in our own production, provides Testing Institute Darmstadt (MPA).
maximum stability and wear resistance. And, therefore, more safety
and a longer service life!
Partial laser-hardening for highly

stressed surfaces Highest degree of hardness
DURA
Q Ideal accuracy of contour for Q ROTHENBERGER press jaws are
LAZR
highest precission during the
complete live time
performing with the highest degree
of hardness at high stressed areas
TEC
LASER HARDENING
Q 40% increase in hardness* Q Even in the case of high burr
ROTHENBERGER
formation during compression,
the wear is reduced to a minimum
+ 40 %
HARDNESS
AT HIGHLY STRESSED
AREAS *
100% extended lifetime of the

+100%
PRESS CYCLES
press jaws among other things
due to laser hardening* Adjustment of the plate WITH LASER
HARDENING*
Parts which have to be flexible Durability increased by approx. 45%*
stay ductile
ROTHENBERGER press jaws

before surface treatment
110 * in comparison to previous models

Pressing
Press jaws compact
Press jaws compact Precision-manufactured
DURA
LAZR
TEC
For ROMAX Compact TT contours
LASER HARDENING
ROTHENBERGER
ROTHENBERGER press jaws with proven material and manufacturing For optimum and reliable
quality for system dependent pressing of fittings up to Ø 40 mm pressings
(plastic / multi-layer) and / or up to Ø 28 mm (metal).
Made of forged, highly resilient
special steel
Suitable for all press machines

DURA LAZR TEC with a constant axial thrust of
19 – 21 kN and compatible press
100% more press cycles with laser hardening*
jaw fixture
3-bolt synchronised mechanism

Permanent bolt
Q Highest precision when pressing
Q
Without potential weak points /
Q Synchronised run of the jaw lever
no thread
Q Increased stability and durability Q
Considerable reduction of the
Q Open the jaw with just 1 finger! breakage risk
Q Increased safety
Batch numbering and
individual testing 5
Secures the high-quality standard of Long-term corrosion protection
material and press contour
Optimum for heavy-duty field
operation
Product identification, simple to read, clear system and
nominal size classification
Optimised inlet contour
Q Adapted power flow

 Less wear and tear
Press jaws compact Ø 35 mm Precision-manufactured

DURA
LAZR
TEC
For ROMAX Compact TT
LASER HARDENING
contours ROTHENBERGER
ROTHENBERGER compact press jaws SV35 and M35 with optimized For optimum and reliable
material and manufacturing quality, suitable for system conforming pressings
pressing of metal fittings of Ø 35 mm with the ROMAX Compact TT Made of forged, highly resilient
pressing machine. special steel

100% more press cycles with laser hardening* jaw fixture
Permanent bolt
Q
no thread
Q Highest precision when pressing Q
Q Synchronised run of the jaw lever breakage risk
Q Increased stability and durability Q Increased safety
Q Open the jaw with just 1 finger!
Long-term corrosion protection

Product identification, simple to read, clear system and operation

Model kg g
No.
 Less wear and tear Press jaw compact, SV35 2.2 1000002266
Press jaw compact, M35 2.2 1000002267
ACCESSORIES
ModelNo.
ROCASE 4212 with inlay compact press jaws 1000002655

Press jaw overview starting on 115
* in comparison to previous models 111

Pressing
Press jaws compact / standard
Interchangeable press jaw compact
For ROMAX Compact TT
ROTHENBERGER interchangeable press jaw for system
dependent pressing of plastic fittings Ø 12 - 32 mm.
Guiding ridge
Safe admittance from

Combine various interchangeable interchangeable press jaws
inserts with only one press jaw!
Made of forged, highly resilient
special steel

3-bolt synchronised mechanism with a constant axial thrust of
Synchronised run of the jaw lever
jaw fixture
enables the jaw to be opened
with just one finger
5 Batch numbering and

individual testing
Secures the high-quality
standard of material and Optimum for heavy-duty field
press contour operation
Interchangeable inserts set
Model Inserts Ø mm No. Model Inserts Ø mm No.
Interchangeable inserts compact set, RFz1) 16, 20, 25, 32 14849 Interchangeable press jaw compact w/o inserts 1000002134
Interchangeable inserts compact set, U1) 16, 20, 25, 32 14869 Interchangeable press jaw + set, RFz 12, 16, 20 1000002135
Interchangeable inserts compact set, TH1) 16, 20, 26, 32 14895 Interchangeable press jaw + set, CO 12, 16, 20 1000002136
1)
Can only be used with interchangeable press jaw No. 1000002134 (sucessor of No. 014880X)!
Press jaws standard Precision-manufactured DURA

LAZR
For ROMAX 4000, ROMAX 3000 AC and contours TEC
LASER HARDENING
ROTHENBERGER
ROMAX AC ECO For optimum and reliable

ROTHENBERGER press jaws with proven material and pressings
manufacturing quality, for system conforming pressing
of fittings up to Ø 40 mm (plastic / multi-layer) and / or Made of forged, highly resilient
up to Ø 54 mm (metal). special steel

100% more press cycles with laser hardening* jaw fixture

Permanent bolt
Q
no thread
Q Increased stability and durability
Q
Q Open the jaw with just one finger! breakage risk
Q Increased safety
Batch numbering and
individual testing
Secures the high quality standard of

Product identification, simple to read, clear system and

operation

 Less wear and tear
Press jaw overview starting on 115

Pressing
Press jaws standard
Press jaws standard 3-elemental DURA
LAZR
TEC
For ROMAX 4000, ROMAX 3000 AC
LASER HARDENING
ROTHENBERGER
and ROMAX AC ECO

ROTHENBERGER 3-elemental press jaws with proven Made of forged, highly resilient
material and manufacturing quality, for system special steel
dependent pressing of M42/M54 fittings and TH50/ Suitable for all press machines
TH63 fittings. with a constant axial thrust of
jaw fixture
Precision-manufactured contours
DURA LAZR TEC
For optimum and reliable pressings
100% more press cycles with laser hardening*
3-bolt synchronised mechanism Wide jaw mouth for easy assembling

of the jaw on the fitting
Q Increased stability and durability 5
Q Open the jaw with just 1 finger!
3-elemental system
Q Easy handling / assembling

Q Optimized power distribution
Press jaws standard 3-elemental, M42 4.8 1000001273 Press jaws standard 3-elemental, TH50 4.8 1000001810
Press jaws standard 3-elemental, M54 4.8 1000001274 Press jaws standard 3-elemental, TH63 4.8 1000001811
Press jaws standard sets DURA

LAZR
TEC
ROTHENBERGER press jaws up to Ø 54 mm Effective LASER HARDENING
ROTHENBERGER
in the stable ROCASE case system Enough space for up to 7

press jaws in the ROCASE
4414 up to Ø 63 mm
Effective
Enough space for up to 4

press jaws in the ROCASE
4212 up to Ø 32 mm
Variable
Enough space for all standard

and compact press jaws in the
ROCASE 4414 up to Ø 63 mm
Model Press jaws Ø mm No.

kg g
Press jaw standard set, SV 15 - 22 - 28 6.8 1000002068

Press jaw standard set, SV 15 - 18 - 22 - 28 8.7 015060X
Press jaw standard set, SV 42 - 54 10.5 015080X
Press jaw standard set, M 15 - 22 - 28 6.7 1000002067
Press jaw standard set, M 15 - 18 - 22 - 28 8.6 015062X
Press jaw standard set 3-elemental, M 42 - 54 12.0 1000001502
Press jaw standard set, TH 16 - 20 - 26 8.7 015063X
Press jaw standard set, U 16 - 20 - 25 7.3 1000002069
Press jaw standard set, G 16 - 20 - 26 - 32 8.8 015068X
Press jaw standard set, VP 16 - 20 - 25 - 32 9.4 015072X
Press jaw standard set, BE 16 - 20 - 26 8.7 1000002065
ROCASE case system ROCASE 4414 with inlay up to 7 press jaws 1.5 1000001807
Stack, click, transport ROCASE 4212 with inlay up to 4 press jaws 1.6 1000001808
ROCASE starting on 331
113
Pressing
Press chains standard
Press chains standard DURA
LAZR
TEC
For ROMAX 4000, ROMAX 3000 AC and
LASER HARDENING
ROTHENBERGER
ROMAX AC ECO
Suitable for press machines with a constant, axial
pressing force of 32 - 34 kN and the appropriate compatible Precision-manufactured contours
press jaw fixture. For the system conforming pressing of For optimum and reliable pressings
fittings from Ø 42 mm up to Ø 54 mm (metal)
and / or from Ø 40 mm up to Ø 110 mm (multi-layer).
Clamping technology
Self-clamping press chain
DURA LAZR TEC
100% more press cycles with laser

hardening* 3 segments
Q For an optimum force distribution

on the fitting
Q Two flexible elements for an
optimal material flow on the fitting
5
Low weight
Batch numbering and
individual testing Comfortable operation even over long
Secures the high-quality standard of periods of work
Fig. press chain SV54
Made of forged,
highly resilient special steel
Suitable for all press machines with

a constant, axial force of 32 - 34 kN
and compatible press jaw fixture

operation
Synchronised run of the jaw lever

enables the jaw to be opened with
just one finger
Fig. intermediate jaw ZBS1
Opening of the press chain up to 180°

allows assembling even in Gripping the press chain with
confined spaces Closing the press chain intermediate jaws
Press chain sets include: Press chains

according to the table, intermediate
jaw ZBS1 (No.1000001126), ROCASE
case system 4212 (No.1000001960)
Model Press chains Ø mm No.

kg g
Press chain set, SV with intermediate jaw ZBS1 42-54 7.3 1000001501
Press chain set, M with intermediate jaw ZBS1 42-54 7.3 1000001500
Intermediate press jaw ZBS1 For press chains SV, M and U up to Ø 54 mm 2.1 1000001126
Press chain standard, M 42 for ZBS1 1.3 1000001391
Press chain standard, M 54 for ZBS1 1.5 1000001392
Press chain standard, SV 42 for ZBS1 1.3 1000001393
Press chain standard, SV 54 for ZBS1 1.5 1000001394
Press chains overview starting on 115

Pressing
Overview press jaws
System
HA Nominal size Press jaws compact Interchangeable insert Press jaws standard Press chains standard
compact Only to be used with intermediate
Use only in combination with jaw ZBS1 (No. 1000001126) for
interchangeable jaws (No. 1000002134) SV, M, Ø 42-54 mm or
ZBS2 (No. 1000000123) for
U Ø 63, 75, 90, 110 mm
A Metal / NE-Metal
RF A1/2” — — 015222X —
A3/4” — — 015223X —
A A1” — — 015224X —
A11/4” — — 015225X —
A11/2” — — 015226X —
AB A2” — — 015227X —
B
M M12 015151X — 015101X —
M15 015152X — 015102X —
AV
CO M18 015153X — 015103X —
M22 015154X — 015104X —
R BE M28 015155X — 015105X —
M35 1000002267 — 015106X — 5
M42 — — 1000001273 1000001391
KI
M54 — — 1000001274 1000001392
V/SV V/SV12 HA 015261X — 015211X —
V/SV14 015269X — 015219X —
V/SV15 015262X — 015212X —
V/SV16 015260X — 015220X —
V/SV18 015263X — 015213X —
V/SV22 015264X
RF — 015214X —
V/SV28 015265X — 015215X —
V/SV35 1000002266 — 015216X —
V/SV42 A — — 015217X 1000001393
V/SV54 — — 015218X 1000001394
R(H) AB PEX / Multilayer
B
R12 — 14863 015339X —
R14 015370X — 015330X —
AV
015371X 14865 015331X —
CO R16
R17 015378X — 015333X —
R18 015379X — 015334X —
R BE
R20 015374X 14868 015335X —
R25 015380X — 015338X —
R26 KI015376X 14708 015336X —
R32 015377X — 015337X —
RFz RFz12 — 14822 1000000173 —
RFz16 015180X 14823 015161X —
RFz18 1000000124 — —
RFz20 015181X 14824 015162X —
RFz25 015182X 14825 015163X —
RFz26 1000000125 — —
RFz32 015183X 14826 015164X —
TH TH14 015395X 14842 015321X —
TH16 015385X 14843 015322X —
TH18 015398X 14844 015323X —
TH20 015389X 14845 015324X —
TH25 015399X 14846 015325X —
TH26 015391X 14847 015326X —
TH32 015393X 14848 015327X —
TH40 015401X — 015328X —
TH50 — — 1000001810 —
TH63 — — 1000001811 —
THG THG32 1000000236 — 1000000235 —
THT THT32 015393H — 015329X —
For more information visit rothenberger.com
115
Pressing
Overview press jaws / Pressnavigator app
System Nominal size Press jaws compact Interchangeable insert Press jaws standard Press chains standard
compact Only to be used with intermediate
Use only in combination with jaw ZBS1 (No. 1000001126) for
interchangeable jaws (No. 1000002134) SV, M, TH Ø 40, 42, 50, 63 mm or
ZBS2 (No. 1000000123) for
U Ø 63, 75, 90, 110 mm
U PEX / Multi-layer
U14 015351X 14832 015311X —
U16 015352X 14833 015312X —
U18 015353X 14834 015313X —
U20 015354X 14835 015314X —
HA U25 015355X 14836 015315X —
U32 015357X 14838 015317X —
U40 015358X — 015318X —
U50 — — — —
U63 — — — 1000002947*
U75 — — — 1000002949*
RF
U90 — — — 1000002950*
5 U110
HA
— — — 1000002952*
RC A RC26 015277X 14837 015271X —
VP VP14 015530X 14882 015230X —
AB
VP16 015531X 14883 015231X —
B VP20 015532X 14884 015232X —
VP25 RF015533X 14885 015233X —
AV VP32 015534X 14886 015234X —
CO BE BE16 A 015291X — 015392X —
BE20 015292X — 015394X —
R BE BE26 015293X — 015396X —
BE32 AB
015294X — 015397X —
B
CO KI CO12 — 14852 — —
CO16 — 14853 — —
AV
CO CO20 — 14854 — —
CO25 — 14855 — —
G R G16 BE 015362X — 015302X —
G20 015364X — 015304X —
G26 015366X — 015306X —
KI
G32 015367X — 015307X —
G40 015368X — 015308X —
HA HA16 015580X — 015280X —
HA20 015581X — 015281X —
HA26 015582X — 015282X —
HA32 015583X — 015283X —
HA40 — — 015284X —
For more information visit rothenberger.com
Pressnavigator app
Pressnavigator for easy verification of the
compatibility of press tool and fitting system
Which press tool is suitable for which fitting system? let

The ROTHENBERGER Pressnavigator offers convenient assistance: App for smartphone & tab
VER IFIC ATIO N OF THE
with just a few clicks, the compatibility between our press tools FOR EASY
TOOLS
and the established fitting system can be checked. COMPATABILITY OF PRESS
The app is available in German or English. roid!
AVAILABLE FOR iOS & And
iTunes Google Play
116 * Available on request

ressing
P
Overview system approvals
Chibro Adduzione / Gas,
CIMBERIO SpA Cimpress

Anpro EN series stainless
APE Raccordi a pressare
Comisa Multi layer pipe

Press, Turbo Press Gas
Eurotherm, MULTIST-
Bonomi Group Turbo
Conex B-Press, INOX

Press jaws standard
with interchangeable jaws
COMAP, Skin Press

Press jaws compact
DALPEX LaserMulti
Bampi BALPEX Gas
Conex B-Press Gas,

steel, carbon steel
Broen Ballofix Pres

Use only in combination
CO.E.S. Coesklima
Chibro Cunipress,
Como Galvlnized
RATO, Euro 2000

EMPUR PEXPRESS
Interchangeable
Blansol Sistema
Blansol Sistema
Emmeti Gerpex
Riscaldamento
insert compact
Bampi BALPEX
(No. 1000002134)
Nominal size
(Serie MP)
Easypress
Multipex
Dalpex
Solar
M M12 015151X 015101X n •
M15 015152X 015102X n n n n
M18 015153X 015103X n n n n
M22 015154X 015104X n n n n
M28 015155X 015105X n n n n
M35 1000002267 015106X n n n n
M42 1000001273
M54 1000001274
V/SV V12 015261X 015211X n
SV14 015269X 015219X n
SV15 015262X 015212X n n n n
SV16 015260X 015220X n
SV18 015263X 015213X n n n n 5
SV22 015264X 015214X n n n n
SV28 015265X 015215X n n n n
SV35 1000002266 015216X n n n n
SV42 015217X n n
SV54 015218X n n
G G16 015362X 015302X
G20 015364X 015304X
G26 015366X 015306X
G32 015367X 015307X
G40 015368X 015308X
HA HA16 015580X 015280X
HA20 015581X 015281X
HA26 015582X 015282X
HA32 015583X 015283X
HA40 015284X
R (H) R12 015339X 14863
R14 015370X 015330X
R16 015371X 015331X 14865 n
R17 015378X 015333X
R18 015379X 015334X
R20 015374X 015335X 14868 n
R25 015380X 015338X n
R26 015376X 015336X 14708
R32 015377X 015337X n
RFz RFz12 1000000173 14822 n
RFz16 015180X 015161X 14823 n
RFz20 015181X 015162X 14824 n
RFz25 015182X 015163X 14825 n
RFz32 015183X 015164X 14826 n
TH TH14 015395X 015321X 14842 n n n n n n n n
TH16 015385X 015322X 14843 n n n n n n n n n n n
TH18 015398X 015323X 14844 n n n n n n n n
TH25 015399X 015325X 14846
TH32 015393X 015327X 14848 n n n n n
TH40 015401X 015328X n n n n n n
THG THG32 1000000236 1000000235
THT THT32 015393H 015329X
U U14 015351X 015311X 14832
U16 015352X 015312X 14833 n
U18 015353X 015313X 14834 n
U20 015354X 015314X 14835 n
U25 015355X 015315X 14836 n
U32 015357X 015317X 14838 n
U40 015358X 015318X n
RC RC26 015277X 015271X 14837
VP VP14 015530X 015230X 14882
VP16 015531X 015231X 14883
VP20 015532X 015232X 14884
VP25 015533X 015233X 14885
VP32 015534X 015234X 14886
The above release table reflects the status quo at the time this catalogue went to press, which may be subject to technical changes. For latest compatibility information,
please check out the ROTHENBERGER Pressnavigator app for your smartphone.
117
Pressing
F.B.Q. BARONIO,BQ pres
Geberit Mapress Copper

FRÄNKISCHE, ALPEX F50
HAKA, Fimisol, HAKAP-

Interchangeable insert
RES, HAKA, GERODUR

Harden 2000, Polypex
Hitec Sistema, Multis-

HIDROTEC KLIMATEC
IBP ›B‹ Press Rotguss,

Eurotubi Pressfitting
Geberit Mapress Gas

Gabo, Gabopress H+5

Press jaws standard
Giacomini Giacoflex,
Press jaws compact
Frabo Frabopress C
Frabo MULTI-BRASS
Geberit Mapress
Geberit Mepla
(No. 1000002134)
Nominal size
Carbon steel
Goaco Therm
Herz pipefix
Henco PVDF
Steel, 316
Stainless
compact
System
GAROS
trato
2000
Inox
M M12 015151X 015101X n n n •
M15 015152X 015102X n n n n
M18 015153X 015103X n n n n
M22 015154X 015104X n n n n
M28 015155X 015105X n n n n
M35 1000002267 015106X n n n n
M42 1000001273 n n
M54 1000001274 n n
V/SV V12 015261X 015211X n
SV14 015269X 015219X n n
SV15 015262X 015212X n n n
SV16 015260X 015220X n n
5 SV18 015263X 015213X n n n
SV22 015264X 015214X n n n
SV28 015265X 015215X n n n
SV35 1000002266 015216X n n n
SV42 015217X n n n
SV54 015218X n n n
G G16 015362X 015302X n
G20 015364X 015304X n
G26 015366X 015306X n
G32 015367X 015307X n
G40 015368X 015308X n
HA HA16 015580X 015280X
HA20 015581X 015281X
HA26 015582X 015282X
HA32 015583X 015283X
HA40 015284X
R (H) R12 015339X 14863
R14 015370X 015330X n
R16 015371X 015331X 14865 n n
R17 015378X 015333X n
R18 015379X 015334X n
R20 015374X 015335X 14868 n n
R25 015380X 015338X
R26 015376X 015336X 14708 n n
R32 015377X 015337X n n
RFz RFz12 1000000173 14822
RFz16 015180X 015161X 14823
RFz20 015181X 015162X 14824
RFz25 015182X 015163X 14825
RFz32 015183X 015164X 14826
TH TH14 015395X 015321X 14842 n n n n n n n n
TH16 015385X 015322X 14843 n n n n n n n n
TH18 015398X 015323X 14844 n n n n n n
TH20 015389X 015324X 14845 n n n n n n n n n
TH25 015399X 015325X 14846 n n
TH26 015391X 015326X 14847 n n n n n n n n n
TH32 015393X 015327X 14848 n n n n n n
TH40 015401X 015328X n n
THG THG32 1000000236 1000000235 n
THT THT32 015393H 015329X n
U U14 015351X 015311X 14832
U16 015352X 015312X 14833 n n n
U18 015353X 015313X 14834 n
U20 015354X 015314X 14835 n n n
U25 015355X 015315X 14836 n n
U32 015357X 015317X 14838 n n n
RC
U40 015358X 015318X n
RC26 015277X 015271X 14837 n
VP VP14 015530X 015230X 14882
VP16 015531X 015231X 14883 n
VP20 015532X 015232X 14884 n
VP25 015533X 015233X 14885 n
VP32 015534X 015234X 14886 n
118
Pressing
Nussbaum, Optiflex Plus

LAVAGRUND, LAVAPRESS
Interchangeable Insert
MEGARO HAKAPRESS
Jaraflex-presssystem
Multitubo Giacomini
Nussbaum CupressG
Press jaws standard
Mark KG, polymark
Nussbaum Cupress,
Jupiter, Heizsysteme
Press jaws compact
KOHLER, InoxPress
Mair Heiztechnik,
IPA, IPANA-PRES
Oventrop, Cofit
KE KELIT KELOX
Nupi MultiNupi
IVAR MP / PMP
PRESSSYSTEM
(No. 1000002134)
MULTITHERM
Nominal size
MEKUPRESS
NEUTHERM,
›B‹ Press Gas
IBP ›B‹ Press,
Optipress
Compact
Gomafix
IPALPEX
M M12 015151X 015101X •
M15 015152X 015102X n
M18 015153X 015103X n
M22 015154X 015104X n
M28 015155X 015105X n
M35 1000002267 015106X n
M42 1000001273
M54 1000001274
V/SV V12 015261X 015211X n
SV14 015269X 015219X n
SV15 015262X 015212X n n n
SV16 015260X 015220X n
SV18 015263X 015213X n n n 5
SV22 015264X 015214X n n n
SV28 015265X 015215X n n n
SV35 1000002266 015216X n n n
SV42 015217X n n
SV54 015218X n n
G G16 015362X 015302X
G20 015364X 015304X
G26 015366X 015306X
G32 015367X 015307X
G40 015368X 015308X
HA HA16 015580X 015280X n
HA20 015581X 015281X n
HA26 015582X 015282X n
HA32 015583X 015283X n
HA40 015284X n
R (H) R12 015339X 14863
R14 015370X 015330X n n n
R16 015371X 015331X 14865 n n n n n
R17 015378X 015333X n n
R18 015379X 015334X n n n
R20 015374X 015335X 14868 n n n n n
R25 015380X 015338X
R26 015376X 015336X 14708 n n n n n
R32 015377X 015337X n n n n
RFz RFz12 1000000173 14822
RFz16 015180X 015161X 14823
RFz20 015181X 015162X 14824
RFz25 015182X 015163X 14825
RFz32 015183X 015164X 14826
TH TH14 015395X 015321X 14842 n n n n n
TH16 015385X 015322X 14843 n n n n n n n n
TH18 015398X 015323X 14844 n n n n n n
TH20 015389X 015324X 14845 n n n n n n n n
TH25 015399X 015325X 14846 n
TH26 015391X 015326X 14847 n n n n n n n n
TH32 015393X 015327X 14848 n n n n
TH40 015401X 015328X n n n n
THG THG32 1000000236 1000000235 n
THT THT32 015393H 015329X n
U U14 015351X 015311X 14832
U16 015352X 015312X 14833 n n n n
U18 015353X 015313X 14834 n n
U20 015354X 015314X 14835 n n n n
U25 015355X 015315X 14836 n n
U32 015357X 015317X 14838 n n n
U40 015358X 015318X n n n n
RC RC26 015277X 015271X 14837 n
VP VP14 015530X 015230X 14882 n
VP16 015531X 015231X 14883 n
VP20 015532X 015232X 14884 n
VP25 015533X 015233X 14885 n
VP32 015534X 015234X 14886 n
119
Pressing
SANHA NiroSan Serie 9000,
SANHA Press Serie 10000,
SST-Rolltec Delphi-Press,
Sanha 3fit-PRESS SYSTEM
Prandelli, MULTYRAMA
Raccorderie Metalliche,
POLYSAN Press-System
Simplex SiRoCon Cu / E
11000 Gas,12000, 13000
Raccorderie Metalliche
Raccorderie Metalliche
Simplex SiRoCon PPSU

17000 Gas, 18000, 19000
SANHA-NiroSan-Press-
Inoxpress, Steelpress
Tiemme, Cobrapress
PIPELIFE RADOPRESS
Press jaws standard
SANHA PURAPRESS
Press jaws compact
installationssysteme
STS Systemtechnik
RIQUIERA A SERTIR
Simplex SiRoCon
system Chronimo
THERMOSMART
Roth-Roth Rohr-
ROTH SISTEMA
14 mm - 63 mm
Inoxpress Gas
THERMOVAL,
(No. 1000002134)
ROTHAPRESS
Nominal size
Serie 8000
compact
Aespres
PPSU H
TH
M M12 015151X 015101X n n n n n •
M15 015152X 015102X n n n n n n n n
M18 015153X 015103X n n n n n n n n
M22 015154X 015104X n n n n n n n n
M28 015155X 015105X n n n n n n n n
M35 1000002267 015106X n n n n n n n n
M42 1000001273
M54 1000001274
V/SV V12 015261X 015211X n n n
SV14 015269X 015219X n n n
SV15 015262X 015212X n n n n
SV16 015260X 015220X
5 SV18 015263X 015213X n n n n
SV22 015264X 015214X n n n n
SV28 015265X 015215X n n n n
SV35 1000002266 015216X n n n n
SV42 015217X n n n n
SV54 015218X n n n n
G G16 015362X 015302X
G20 015364X 015304X
G26 015366X 015306X
G32 015367X 015307X
G40 015368X 015308X
HA HA16 015580X 015280X
HA20 015581X 015281X
HA26 015582X 015282X
HA32 015583X 015283X
HA40 015284X
R (H) R12 015339X 14863
R14 015370X 015330X 14864 n n
R16 015371X 015331X 14865 n n
R17 015378X 015333X 14866 n
R18 015379X 015334X 14867 n
R20 015374X 015335X 14868 n n n
R25 015380X 015338X 14707 n
R26 015376X 015336X 14708 n n
R32 015377X 015337X 14709 n n n
RFz RFz12 1000000173 14822 n
RFz16 015180X 015161X 14823 n
RFz20 015181X 015162X 14824 n
RFz25 015182X 015163X 14825 n
RFz32 015183X 015164X 14826
TH TH14 015395X 015321X 14842 n n n n
TH16 015385X 015322X 14843 n n n n n n n n
TH18 015398X 015323X 14844 n n n n n n
TH20 015389X 015324X 14845 n n n n n n n n
TH25 015399X 015325X 14846 n
TH26 015391X 015326X 14847 n n n n n n n
TH32 015393X 015327X 14848 n n n n n n
TH40 015401X 015328X n n n n n
THG THG32 1000000236 1000000235
THT THT32 015393H 015329X n
U U14 015351X 015311X 14832
U16 015352X 015312X 14833
U18 015353X 015313X 14834
U20 015354X 015314X 14835
U25 015355X 015315X 14836
U32 015357X 015317X 14838
RC
U40 015358X 015318X n
RC26 015277X 015271X 14837
VP VP14 015530X 015230X 14882
VP16 015531X 015231X 14883
VP20 015532X 015232X 14884
VP25 015533X 015233X 14885
VP32 015534X 015234X 14886
120
Pressing
Wavin Aquatecnic Tigris

Sanpress, Sanpress INOX
TIEMME, SERIE PA / PG
WEFA PLASTIC, WEFA

VSH SudoPress Carbon
Viega sanfix FOSTA, P,
VIEGA PROFIPRESS G
VSH Skin Press PPSU,

Press jaws standard
Watts MTR Art press
TIGRIS Alupex / Blue

Press jaws compact
VSH X-Press Carbon

Wavin FUTURE 1/2,

UPONOR UNIPIPE,
Ulrich VARIOFLEX
UNICORE, Airpipe
Tradesa Serie 700
Vescal, Metalplast
Stainless, Copper
Stainless, Copper
Viega Profipress
VSH Skin Press
Skin Press Gas

HAKA-PRESS,
(No. 1000002134)
Nominal size
Valsir PEXAL
Viessmann
WKS-Press
compact
Winkler
PRESS
PLUS
M M12 015151X 015101X n n
•
M15 015152X 015102X n n
M18 015153X 015103X n n
M22 015154X 015104X n n
M28 015155X 015105X n n
M35 1000002267 015106X n n
M42 1000001273 n
M54 1000001274 n
V/SV V12 015261X 015211X n n n
SV14 015269X 015219X n n
SV15 015262X 015212X n n n
SV16 015260X 015220X n n
SV18 015263X 015213X n n n 5
SV22 015264X 015214X n n n
SV28 015265X 015215X n n n
SV35 1000002266 015216X n n n
SV42 015217X n n n
SV54 015218X n n n
G G16 015362X 015302X
G20 015364X 015304X
G26 015366X 015306X
G32 015367X 015307X
G40 015368X 015308X
HA HA16 015580X 015280X n
HA20 015581X 015281X n n
HA26 015582X 015282X n n n
HA32 015583X 015283X n n
HA40 015284X n
R (H) R12 015339X 14863
R14 015370X 015330X 14864 n n
R16 015371X 015331X 14865 n n n
R17 015378X 015333X 14866 n
R18 015379X 015334X 14867 n n
R20 015374X 015335X 14868 n n n
R25 015380X 015338X 14707
R26 015376X 015336X 14708 n n n
R32 015377X 015337X 14709 n n n
RFz RFz12 1000000173 14822
RFz16 015180X 015161X 14823
RFz20 015181X 015162X 14824
RFz25 015182X 015163X 14825
RFz32 015183X 015164X 14826
TH TH14 015395X 015321X 14842 n n n n
TH16 015385X 015322X 14843 n n n n n n n
TH18 015398X 015323X 14844 n n n n
TH20 015389X 015324X 14845 n n n n n n n
TH25 015399X 015325X 14846 n
TH26 015391X 015326X 14847 n n n n n n
TH32 015393X 015327X 14848 n n n n n
TH40 015401X 015328X n n n n
THG THG32 1000000236 1000000235
THT THT32 015393H 015329X n
U U14 015351X 015311X 14832
U16 015352X 015312X 14833 n n n n
U18 015353X 015313X 14834 n n n
U20 015354X 015314X 14835 n n n n
U25 015355X 015315X 14836 n n n n
U32 015357X 015317X 14838 n n n n
U40 015358X 015318X n n n
RC RC26 015277X 015271X 14837
VP VP14 015530X 015230X 14882 n
VP16 015531X 015231X 14883 n
VP20 015532X 015232X 14884 n
VP25 015533X 015233X 14885 n
VP32 015534X 015234X 14886 n
121
6
122
Threading & grooving
Threading manual 126 - 129
Threading electric 130 - 140
Accessories threading 141
Roll grooving 142 - 143
123
System overview
Threader manual
SUPER CUT sets SUPER CUT sets SUPER CUT sets SANI KIT
1/2 - 1.1/4” 3/8 - 1.1/4” 3/8 - 2” 1/2 - 1”
Operation mode: Handed / manual Handed / manual Handed / manual Handed / manual
Working range: 1/2 - 1.1/4” 3/8 - 1.1/4” 3/8 - 2” 1/2 - 1”
Handle: 1 pc. 2 pcs. 3 pcs. 2 pcs.
Thread type: BSPT - NPT BSPT - NPT BSPT - NPT BSPT - NPT
Number of die heads: 4 pcs. Up to 5 pcs. Up to 7 pcs. 3 pcs.
Number of threading dies: – – – –
Power: – – – –
6 Weight: 5.1 kg 6.2 kg 11.4 kg 8.2 kg
Page 126 - 127 126 - 127 126 - 127 128 - 129
Threader electric
SUPERTRONIC SUPERTRONIC
1250 2000
Operation mode: Handed / electric Handed / electric
Working range: 1/2 - 1.1/4” 1/2 - 2”
Thread type: BSPT - NPT BSPT - NPT
Number of die heads: 4 pcs. 6 pcs.
Number of threading dies: – –
Power: 800 W 1,010 W
Weight: 12.8 kg 14.5 kg
Page 130 - 131 132 - 133
124
System overview
Threader stationary
ROPOWER 50 R SUPERTRONIC 2 SE SUPERTRONIC 3 SE SUPERTRONIC 4 SE
Operation mode: Stationary Stationary Stationary Stationary
Working range: 1/2 - 2” 1/2 - 2” 1/2 - 3” 1/2 - 4”
Thread type: BSPT, NPT, BSPP, BSPT, NPT, BSPP, BSW, BSPT, NPT, BSPP, BSPT, NPT, BSPP,
BSW, metric BSW, metric BSW, metric BSW, metric
Number of die heads: 1 pc. 1 pc. 2 pcs. 2 pcs.
Number of threading dies: 2 pcs. 2 pcs. 3 pcs. 3 pcs.
Power: 1,150 W 1,150 W 1,700 W 1,750 W
Weight: 88.5 kg 68.5 kg 100 kg 120 kg 6

Page 136 - 137 138 - 139 138 - 139 138 - 139
Roll grooving machines

Hand roll groover 1-12” ROGROOVER 1-6” ROGROOVER 1-12”
Operation mode: Handed-manual / handed-electric Handed-electric / stationary Stationary
Working range: 1 - 12” 1 - 6” 1 - 12”
Drive unit: SUPERTRONIC 1250 / 2000 SUPERTRONIC 2000 / 2 - 4SE Motor
Wall thickness: Up to 10 mm Up to 10 mm Up tp 10 mm
Pressure rollers included: 1 pc. 1 pc. 3 pcs.
Power: 800 W / 1,010 W 1,010 W / max. 1,750 W 1,500 W
Transportation frame: – –/– optional
Weight: 12.0 kg / max. 18.2 kg 14.5 kg / max. 134.5 kg 175.0 kg
Page 142 142 143
125
Threading manual
SUPER CUT
Ratchet threader Ø 1/4 - 2”
For production of precise and reliable thread connections
according EN 10226 on threaded pipe according EN 10255 M / H
Product profile
APPLICATION AREA Power optimisation with
For threading of the offset hand lever!
BSPT right: Ø 1/4 - 2”
KEY FEATURES
Slim,
Q compact design with excellent overall size, Quick change die heads
ratchet angle of 22.5° Secure hold
Q Easy operation in hard-to-reach places with the offset lever

Positive octagonal universal drive with
Q Convenient, lockable reversal of the ratchet direction retainer locking
Q Extremely long service life
Q Simple insertion and removal of die heads
Q Secure hold with retainer locking Fits all ROTHENBERGER manual
Q Perfect centering through the long pipe guide is ensured and power threaders
Q Optimised cutting geometry allows a gentle first cut and Simple insertion and removal
excellent chip discharge of the die heads
Long lever
Optimum force transfer
Offset lever
Easy operation in
hard-to-reach places
SUPER CUT when working at the

Quick adjustment building site
Convenient, lockable
reversal of the ratchet
direction
Made of high quality tempered steel
Extremely long service life
With ratchet handle 1/4” - 2” the

attachment of the 1/4” - 1.1/4” die head
results with the use of the Monoblock - adaptor
adaptor (No. 600011500) (No. 600011500)
1.1/2” 2” Adaptor 1/4” 3/8” 1/2” 3/4” 1” 1.1/4”
126
Threading manual
SUPER CUT sets Ø 1/2 - 1.1/4”
With ratchet handle (small octagonal drive, No. 070840X)
and die heads in plastic carrying case (No. 70780)
1/2 - 1.1/4”
1/2” 3/4” 1” 1.1/4” Lever arm No. 6240021
Model Description kg g No.
BSPT R 1/2” - 3/4” - 1” 4.2 070780X

BSPT R 1/2” - 3/4” - 1” - 1.1/4” 5.1 070781X
SUPER CUT sets Ø 3/8 - 1.1/4”

With ratchet handle (small octagonal drive, No. 070840X)
and die heads in ROCASE 4414 (No. 1300003541)
6
3/8 - 1.1/4”
3/8” 1/2” 3/4” 1” 1.1/4” Lever arm No. 6000021
BSPT R 3/8” - 1/2” - 3/4” - 1” - 1.1/4” 6.2 070790X
SUPER CUT sets Ø 3/8 - 2”

With ratchet handle (large octagonal drive, No. 71272), die head
adaptor (No. 71273) and die heads in ROCASE 4414 (No. 1300003541)
3/8 - 2”
1.1/2” 2” Adaptor 1/4” 3/8” 1/2” 3/4” 1” 1.1/4”
Lever arm No. 6010121
BSPT R 3/8”- 1/2”- 3/4”-1”- 1.1/4”- 1.1/2”- 2” 11.4 070891X

BSPT R 1/2”- 3/4”-1”- 1.1/4”- 1.1/2”- 2” 10.8 070892X
ACCESSORIES
Description
Die heads 1/4 - 2” 134

Dies 1/4 - 2” 134
Cutting fluid 135
Pipe roughing wrench 141
Ratchet pipe deburrer 1/4 – 2” 141
127
Threading manual
SANI KIT
Tool set in sturdy plastic carrying case
Ideal for repair and installation jobs requiring complete
steel pipe processing
Product profile
Cutting: Up to Ø 1.1/4”
Q Light and easy to use, always within reach
Thread cutting: Up to Ø 1”
Q Secure guiding of the cutter wheel on the pipe
Assembly, screwing, loosening,
Q Reliable grip with the s-shaped jaw
sealing of thread connections: Up to Ø 1.1/4” Q Firm grip even with heavy-duty use
Q Long service life
Q Precise thread cutting to approved standards
Q Perfect alignment
Steel pipe cutter Super 1.1/4” Corner pipe wrench Super S

Wide rollers Slim, s-shaped jaw
S ecure guiding of the cutter Firm grip

wheel on the pipe
Water pump pliers type SP

SUPER CUT ratchet threader

With heavy duty box joint, chrome vanadium
With SUPER CUT ratchet handle 1.1/4” steel, drop-forged and tempered
Perfect alignment Long service life
Small outer octagon, BSPT R 1/2 - 3/4 – 1” Polished head and joint
Precise thread cutting to approved standards Firm grip even with heavy-duty use
128
Threading manual
SANI KIT
Tool carrying case
Ideal for repair and installation jobs
requiring complete steel pipe processing
The ideal installation set!
SANI KIT when working at the buil-

ding site with RONOL
10-part set (No. 70600) includes: SUPER CUT ratchet threader 1.1/4” (No. 070840X),
6
quick-change die heads BSPT R 1/2” (No. 070823X) - 3/4” (No. 070824X) - 1”
(No. 070825X), steel pipe cutter SUPER 1.1/4” (No. 70040), water pump pliers type
SP 10” (No. 70528), corner pipe wrench 1” (No. 070122X) as well as teflon tape
(No. 855360), in plastic carrying case
Model kg g No.
SANI KIT tool set 8.2 70600
SUPER CUT ratchet arm

With offset adaptor
Direct seating via adaptor

for die heads for die heads Handle kg g No.
1/4” - 1.1/4” - 2 pcs. 1.7 070840X Ratchet handle

1.1/2” - 2” 1/4” - 1.1/4” 3 pcs. 2.5 71272 No. 71272
ACCESSORIES
Description
Die heads 1/4 - 2” 134

Dies 1/4 - 2” 134
Cutting fluid 135
129
Threading electric
SUPERTRONIC 1250 1)
Power threader Ø 1/4 - 1.1/4”

For quick and effortless production of precise and reliable
thread connections to approved standards
Product profile
For threading of Q Die head can be used in both directions (left and right)
BSPT right: Ø 1/2 - 1.1/4” Q Stable speed by forward and reverse motion
Optional (not included in set): Ø 1/4”, 3/8”
TECHNICAL DATA
NPT: Ø 1/4 - 1.1/4”
Threading speed: 15 - 20 rpm
KEY FEATURES Rapid reverse speed: 27 rpm
Q Ideal for confined spaces (corners, shafts) Performance: 800 W
Q Sturdy and light, even with heavy-duty use Current: 230 / 110 V
Q Compact gear housing with excellent overall size Weight: 4.9 kg
Q High power transmission, quiet running with long service life Dimensions: 456 x 168 x 76 mm
Q Tough, rugged and durable
Q Weight reduction and easy handling
6
Aluminium casing Compact gear housing
Sturdy and light even Gear housing with

with heavy-duty use excellent overall size
Electric reverse
Weight reduction and

easy handling
Fibreglass reinforced
5-axle helical gear plastic gear housing
Suitable for field operation,
small shaped head (11 cm) High power transmission, quiet Tough, rugged and durable
running and long service life
Ideal for confined spaces
(corners and shafts)
Ideal for portable operation due to its compact design and weight
of only 4.9 kg Small head shape (11 cm) Pipe roughing
1)
Threading electric
SUPERTRONIC 1250 set
Set includes: SUPERTRONIC 1250 up to Ø 1.1/4”with forged pipe
clamp (No. 865008700), precision die heads complete in plastic
carrying case (No. 995858100)
Small – Fast – Light
Pipe clamp
Fig. SUPERTRONIC 1250 set (No. 71450)

{
optional
g 230 V 110 V
SUPERTRONIC 1250 set, BSPT 1/2 - 3/4 - 1 - 1.1/4” 14.5 71450 71451
SUPERTRONIC 1250 set, NPT 1/2 - 3/4 - 1 - 1.1/4” 13.0 71454 71453
SUPERTRONIC 1250 with forged pipe clamp, without die heads 3.9 71470
Pipe clamp for SUPERTRONIC 1250 Up to max. 1.1/4” 1.6 865008700 865008700
Helical gears for maximum power (800 W) Portable, fast and easy steel pipe processing
ACCESSORIES
Description
Die heads 1/4 - 2” 134

Dies 1/4 - 2” 134
Cutting fluid 135
131
Threading electric
SUPERTRONIC 2000 1)
Power threader Ø 1/4 – 2”

For quick and effortless production of precise and reliable thread
connections to approved standards
Product profile
For threading of Secure
Q grip in both turning directions with the hardened,
BSPT right: Ø 1/4 - 2” interlocking prism pipe clamp
NPT: Ø 1/4 - 2” Q Die heads are held firmly in place through direct seating with

High reduction gears with spur wheel teeth, induction tension ring locking
tempered, 7 parallel gear shafts, each ball bearing mounted Q Off-set die head mounting allows for threading even close

High, consistent power transmission when fully loaded to walls
Performance: Q Ideal for confined spaces (corners and shafts)
Strong 1,010 W motor, double insulated with VDE and CEE, Q User-friendly work with the large mechanism for switching
interference free for reliable long-term use directions
Threading speed: Q Reliable motor for long-term use
15 - 25 rpm, rapid reverse 60 rpm
(4 x faster reverse with reverse drive)
Maintenance friendly with continuous lubrication
6
Hardened, interlocking prism
pipe clamp
Secure grip in both turning

directions Large mechanism for switching directions
User-friendly work
Strong 1,010 W motor, double insulated

with VDE and CEE, interference free
Universal motor for reliable, professional

long-term use
1,010 W universal motor
Low energy consumption

Compact
gear housing
Ideal for
confined spaces
Direct seating with Off-set die head

tension ring locking mounting
Die heads are held firmly Threading possible Performance: 1,010 W!

in place even close to walls
Use with roll grooving tool

Easy insertion of the die heads ROGROOVER ROFIX adaptor (No. 71271) High reduction gears
1)
Threading electric
SUPERTRONIC 2000 set
Set includes: SUPERTRONIC 2000 with pipe clamp (No. 71280),
ROFIX adaptor (No. 71271), and precision die heads, ROCASE 6414
(No. 1300003336) with inlay
Can also be used in combination

with a roll grooving tool!
Pipe clamp
Adaptor
g 230 V 110 V
SUPERTRONIC 2000 set, BSPT R 1/2” - 3/4” - 1” - 1.1/4” - 1.1/2” - 2” 14.5 71256 71258
SUPERTRONIC 2000 set, NPT 1/2” - 3/4” - 1” - 1.1/4” - 1.1/2” - 2” 14.5 71257 71259
SUPERTRONIC 2000 with forged pipe clamp, without die heads 6.8 71250 71251
SUPERTRONIC 2000 set in ROCASE with ROFIX and forged pipe clamp 11.2 1000002011 1000002016
Work in confined spaces Die heads with the tripod universal workbench
ACCESSORIES
Description
Die heads 1/4 - 2” 134

Dies 1/4 - 2” 134
Cutting fluid 135
133
Threading electric
Precision die heads DURA
EASY
CUT
With enlarged shaving discharge chambers
PRECISION STEEL
ROTHENBERGER
For faster threading, reinforced locking plate and pre-

cise die seating. Fits in ROTHENBERGER SUPERTRONIC
1000, SUPERTRONIC 1250, SUPERTRONIC 2000 and
SUPER CUT threaders Fully automatic production process
Threading die heads with Reduced production tolerances to increase

optimized geometry the service life by up to 10%
Reduced effort of up to 10%

for person and machine
Extra wide and exchangeable
threading dies
Highest demands and long

service life
Precision threading dies
Special viscous hard steel

with long service life
Forcelocked octagonal universal
drive with snap ring locking
Big chamber
Easy and tool-free assembly with
Faster and easier removal secure hold
of metal chips
Product profile BSPT R No. NPT No.

6
KEY FEATURES 1/4” 070821X
Q T hreading die heads with optimized geometry to reduce 3/8” 070822X 3/8” 070908X
the effort by up to 10% for person and machine 1/2” 070823X 1/2” 070912X
Q Reduced manufacturing tolerance for quicker performance 3/4” 070824X 3/4” 070913X
1” 070825X 1” 070914X
Q Interchangeable threading dies to increase economic efficiency
1.1/4” 070826X 1.1/4” 070915X
Q Quick change threading die heads with secure holding for 1.1/2” 070842X 1.1/2” 070849X
SUPER CUT, SUPERTRONIC 1250 and 2000 models 2” 070843X 2” 070850X
Threading dies ROFIX adaptor

Precision threading dies Fits small external octagonal die heads from Ø 1/4 - 1.1/4“
Q Gentle first cut, extremely long life, 4 pieces / pack Q Easy insertion of the die head with tension ring locking
Q O
ptimum results are achieved with original ROTHENBERGER thread
cutting fluid
BSPT R No. NPT No.
1/4” 070831X 1/4” 070916X

3/8” 070832X 3/8” 070917X
1/2” 070833X 1/2” 070918X Tension ring
3/4” 070834X 3/4” 070919X locking
1” 070835X 1” 070920X
1.1/4” 070836X 1.1/4” 070921X Model kg g No.
1.1/2” 070869X 1.1/2” 070945X
2” 070870X 2” 070946X ROFIX adaptor with tension ring locking 0.8 71271
134
Threading electric
RONOL
High-performance cutting oil
Product profile
KEY FEATURES
Q Excellent cooling and lubricating properties
Q Durability of the threading die is increased considerably
Q For perfect, clean threads
Q Safe for skin contact
Q Also suitable as cold lubrication when cutting metal
TECHNICAL DATA
Mineral-based oil
For threading of all materials including stainless steel
Emulsifying agent enables easy rinsing of the pipeline without
unhealthy polychlorinated biphenyl (PCB)
Mineral-based cutting oil is not permitted for drinking

water installations - Please check your national regulations!
6
Model Contents kg g No.
RONOL spray can 600 ml 0.58 12 65008

RONOL canister 5l 4.60 1 65010
RONOL SYN
High-performance cutting fluid
Product profile
KEY FEATURES
Q Excellent cooling and lubricating properties
Q Able to handle high pressure
Q Longer life for the cutting tool
Q Safe for skin contact
Q Also suitable as cold lubrication when cutting metal
TECHNICAL DATA
No mineral-based oils, purely synthetic:
developed and approved for drinking water and plumbing
installations. DVGW tested.
100% water soluble, physiologically neutral, silicone-free:
easily washable
Emulsifying agent enables easy rinsing of the pipeline
No build-up of shavings: perfect cooling quality
Good corrosion protection: no rusting
Undiluted application
High polymer, without EP-additives such as sulphur,
phosphorus or chlorine: increased cutting performance
RONOL SYN spray can 600 ml 0.75 12 65013

RONOL SYN canister 5 l 5.20 1 65015
135
Threading electric
ROPOWER 50 R 1)
Portable compact threader Ø 1/4 - 2”

Quick and effortless production of precise and reliable pipe and bolt
threads to approved standards
Product profile
Use on building sites, for repairs and service, industrial use and Q Quick and reliable threading, trimming, deburring, and grooving
for installation work Q Effortless and comfortable transport with the light, navigable
For threading of: working carriage, which also serves as a workbench
BSPT right, EN 10226, ISO 7-1: Ø 1/4 - 2” Q Complete pre- and post-processing of pipes
NPT, ASME B1.20.1: Ø 1/4 - 2” Q Easy to maintain machine design
BSPP, ISO 228-1, DIN 259: Ø 1/2 - 2” Q Die head type R (automatic with integrated oil feed)
BSW, B. S 84: Ø 3/8 - 2” Q Portable transport frame (standard)
Metric, ISO 261, DIN 13: Ø 10 - 24 mm
TECHNICAL DATA
Performance: 1,150 W
Speed: 40 rpm
Weight: 68 kg
Dimensions (L x W x H): 535 x 430 x 340 mm
Pre- and post-processing of pipes

6
Self-centering pipe cutter
Precise cuts
Internal deburrer, snap in, 3-blade
Burr-free work Original RIDGID2) threading

dies can optionally be used!
Impact hammer chuck with maximal
clamping-force
No pipe slippage
Self-centering rear chuck
Quick and precise alignment of the pipe
Easy to maintain machine design

Motor double insulated in accordance with VDE
Safe operation
Stable high torque motor
Constant power transferral
Off-set spindle lubrication
Easy maintenance
Machine slightly angled

Geared oil pump with filter system and adjustable fluid qualities
Reduced oil consumption, oil coating
in pipe interior is avoided Constant oil flow quantities
Large plastic shavings collection trough
Easy to clean
1)
136 2)
RIDGID is a registered trade mark of the Emerson Electric Co., St. Louis, USA
Threading electric
ROPOWER 50 R
Set includes: ROPOWER 50 R, automatic die head 1/2” - 2”(No. 56052),
SS dies BSPT 1/2”- 3/4” (No. 056370X), 1” - 2”(No. 056371X), Die head type R
safety foot switch (No. 56335), collapsible stand (No. 56051), tool
Automatic die head with
integrated oil feed
Long life of the die heads
Transportation frame Optimal lubrication and

(Included in delivery) cooling of the die heads
Long life of the die heads

Carriage with storage space and
a mount for the foot switch
Clearly arranged work
Collapsible undercarriage
Comfortable transport
Fig. collapsible stand (No. 56051)

included in delivery!
6
With 2 plastic wheels
High mobility
Safety foot switch (No. 56335)
Increased safety
Automatic die head with Cost-effective production
integrated oil supply High mobility Thread roughing of grooves
Model Volt kg g No.
ROPOWER 50 R with automatic die head:

BSPT R 1/2 - 3/4”, 1-2” 230 V 88.5 56050
BSPT R 1/2 - 3/4”, 1-2” 110 V 88.5 56045
BSPP R 1/2 - 3/4”, 1-2” 230 V 88.5 56057
Collapsible stand ROPOWER 50 R 19.2 56051
Spare cutting wheel (PANDA 40, PANDA 90, PISET 3 SG, Nr. 6 SC 2 S, 2 SE, 3 S, 3 SE, 4 S, 4 SE) 0.02 70074
Supporting bolt for transport frame (4 pcs.) 0.7 56049
Supporting legs (4 pcs.) 5.0 56488
ACCESSORIES
Description No.
Cutting fluid 135

Automatic die heads 141
Threading dies 141
NIPPEL MAX 141
Pipe roughing wrench 141 56500
ROGROOVER 1-6” 142 56505
137
Threading electric
SUPERTRONIC 2 SE / 3 SE / 4 SE 1)
Compact threader Ø 1/4 - 4”

Reliable and proven for constant professional use
Product profile
Q Ideal for portable and stationary threading in the workshop, Q Universal die head seating (standard or automatic)
on-site, for repairs and service, trade and industry, pipeline Q Precise guiding of the die head
construction as well as for sanitary and heating installations Q Low-wear and precise guiding
Q Universal application, with or without stand, i.e. on a workbench
Q Fast axial alignment of the pipe
For threading of: Q No pipe slippage due to impact hammer chuck
BSPT right, EN 10226, ISO 7-1: Ø 1/4 - 2” Q Burr-free work
NPT, ASME B1.20.1: Ø 1/4 - 2”
BSPP, ISO 228-1, DIN 259: Ø 1/2 - 2”
BSW, B. S 84: Ø 3/8 - 2” Can also be used in combination
Metric, ISO 261, DIN 13: Ø 10 - 36 mm with a roll grooving tool!
Ø 10 - 24 mm (2 SE)
Internal deburrer, snap in, 3-blade
Burr-free work
6 Smooth action impact hammer chuck

with maximal clamping force
No pipe slippage
Self-centering rear chuck
Axial alignment of the pipe
Modular system concept
Universal die head adaptor, optional in

Working spindle with closed
standard or automatic models
bearings on both sides
Low-wear and precise guiding
Dual-sided tool guide sled

Sturdy oil pump with high flow
Precise guiding of the die head power and adjustable fluid
quantities, filter system and
integrated oil feed
Optimal lubrication and cooling

Tool / guide sled propulsiont
via turnstile
Large shavings collection trough
Finely controlled propulsion made of plastic
Easy to clean
Fig. SUPERTRONIC 2 SE
Impact hammer chuck with

inter-changeable clamping jaw, Automatic die heads with quick
optimal clamping properties adjustment of thread size, automatic
through flexible adjustment thread length and finely adjustable thread
and broad support depth without recentering
Transport frame for 3 and 4 SE (No. 57050)
1)
Threading electric
SUPERTRONIC 2 SE
Standard die head: 1/2 - 2” (No. 56156) 1)
Automatic die head: 1/2 - 2” (No. 56266)

TECHNICAL DATA
Power: 1,150 W
Speed: 40 rpm
Weight, with die heads: 68 kg
Set includes: SUPERTRONIC 2 SE, automatic die head 1/2 - 2” (No. 56165)
or automatic die head (No. 56266), SS threading dies 1/2 - 3/4” (No. 56003), 1 - 2”
(No. 56007), safety foot switch (No. 56335), supporting legs (No. 56488), tool
SUPERTRONIC 2 SE kg g 230 V
with standard die head 68 56150 SUPERTRONIC 2 SE No.

BSPT R 1/2 - 3/4”, 1 - 2”
with automatic die head 68 56175 Deburrer without holder for 2 SE 56198
BSPT R 1/2 - 3/4”, 1 - 2” Supporting legs (4 pcs.) 56488
SUPERTRONIC 3 SE
Compact threader Ø 1/2 - 3” 6
Standard die head: 1/2 - 2” (No. 56156), 2 - 3” (No. 56104) 1)
Automatic die head: 1/2 - 2” (No. 56266), 2.1/2 - 3” (No. 56288)

TECHNICAL DATA
Power: 1,700 W
Speed: 33 rpm
Set includes: SUPERTRONIC 3 SE, standard die heads 1/2 - 2” (No. 56156) or
automatic die heads (56266), standard die head 2 - 3” (No. 56104) or automatic die
head 2 1/2 - 3” (56288), SS threading dies 1/2 - 3/4” (No. 56003), 1 - 2” (No. 56007), SS
threading dies 2 - 3” (No. 56006), SS threading dies 2 1/2 - 3” (No. 56489), safety foot
switch (No. 56335), supporting legs (No. 56491), tool
SUPERTRONIC 3 SE kg g 230 V 110 V
with standard die head 100 56250 56253 SUPERTRONIC 3 SE No.

BSPT R 1/2 - 3/4”, 1 - 2”, 2 - 3”
with automatic die head 100 56255 56254 Deburrer without holder for 3 SE 56199
BSPT R 1/2 - 3/4”, 1 - 2”, 2.1/2 - 3”
SUPERTRONIC 4 SE
SUPERTRONIC 4 SE with automatic die head 1)
TECHNICAL DATA Lever
Power: 1,750 W Various adjustable speeds

Speed: 22 / 50 rpm
Set includes: SUPERTRONIC 4 SE, BSPT automatic die head 1/2 - 2”

(No. 56266), BSPT automatic die head 2 1/2 - 4” (No. 56289), SS threading dies
1/2 - 3/4” (No. 56003), SS threading dies 1 - 2” (No. 56007), SS threading dies
2 1/2 - 4” (No. 56294), safety foot switch (No. 56335), supporting legs (No. 56489),
tool
SUPERTRONIC 4 SE kg g230 V 110 V
with automatic die head 120 56465 56475

BSPT R 1/2 - 3/4”, 1 - 2”, 2.1/2 - 4”
NPT 1/2 - 3/4”, 1 - 2”, 2.1/2” - 4” 56466
Deburrer without holder for 4 SE 56200
Transport frame for 3 and 4 SE 25 57050
1)
C
Threading electric
Precision die heads Overview die heads / threading dies
For machine types ROPOWER 50 R, PANDA, PISET,
SUPERTRONIC 2 S, 2 SE, 3 S, 3 SE, 4 S and 4 SE
SUPERTRONIC 2 SE
SUPERTRONIC 3 SE
SUPERTRONIC 4 SE
Product profile
ROPOWER 50 R
Die heads Threading dies
KEY FEATURES Thread type Size No. Size No. No.
Standard die heads SS-steel HSS-steel
stainl. steel /
Q Time saving with a simple and quick change of the threading dies Inox pipe
Q User-friendly with the locking positioning which eliminates Automatic die heads suitable for RIDGID1) threading dies
complicated calibration BSPT R 1/4 - 3/8” 56369 56379 
Q Longer life of the dies with the integrated lubrication 1/2 - 2“ 56052 1/2 - 3/4” 056370X 56380 
1 - 2” 056371X 
Q Guaranteed consistent cutting oil film on the pipe surface
NPT 1/2 - 2” 56053 1/4 - 3/8” 56372 
1/2 - 3/4” 56373 
1 - 2” 56374 
BSPP 56054 1/2 - 3/4" 56058    

1 - 2" 56059    
Standard die head
Automatic die heads suitable for ROTHENBERGER threading dies
BSPT R 1/2 - 2” 56266 1/2 - 3/4” 56003 56235    
1- 2” 56007 56236    
2.1/2 - 3” 56288 2.1/2 - 3” 56291 56237  
2.1/2 - 4” 56289 2.1/2 - 4” 56294 56238 
NPT 1/2 - 2” 56271 1/2 - 3/4” 56111 56180   
6 1 - 2” 56112 56181   
2.1/2 - 3” 56268 2.1/2 - 3” 56295 56183  
2.1/2 - 4” 56269 2.1/2 - 4” 56296 
3.1/2 - 4" 56184 
ROTHENBERGER standard / manual die heads

BSPT R 1/4 - 3/8” 56153 1/4 - 3/8” 56001 56135    
1/2 - 2” 56156 1/2 - 3/4” 56003 56235    
1 - 2“ 56007 56236    
2 - 3“ 56104 2 - 3” 56006 56121  
3.1/2 - 4” 56032 3.1/2 - 4” 56008 56122 
NPT 1/4 - 3/8” 56118 1/4 - 3/8“ 56110    

1/2 - 2” 56156 1/2 - 3/4” 56111 56180    
1 - 2” 56112 56181    
2.1/2 - 3” 56104 2.1/2 - 3” 56114  
Automatic die head
BSPP 1/2 - 1.1/4” 56076 1/2 - 3/4”    
1 - 1.1/4”    
1.1/2 - 3” 56077 1.1/2 - 2” 56097  
2.1/2 - 3” 56098
Product profile
 
BSW 3/8 - 1” 56153 3/8” 56009    

KEY FEATURES 1/2” 56010 56162    
5/8” 56011 56163    
Automatic die heads 3/4” 56012 56164    
Q Simple and clear operation with the quick-adjustment 7/8” 56013 56165    
1” 56166    
thread sizes 1.1/8 - 2” 1.1/8 - 1.1/4” 56185    
Q Automatic adjustable thread length for serial production 1.1/2”    
1.5/8 - 1.3/4” 56187    
Q Flexible work: Each thread size offers individual fine adjustment 1.7/8 - 2” 56188    
of the thread depth without recentering dimension change

Metric 10 - 24 56133 10 56081 56351    
12 56082 56352    
14 - 16 56083 56353    
18 - 22 56085 56355    
24 56088 56358    
27 - 36 56315 27 56189    
30 - 33 56190    
Please note: The die heads do not include threading dies! 36 56191    
Precision threading dies Suitable for:

Q onical pipe threads - BSPT
C
High material quality and precise workmanship guarantee easy Whitworth pipe threads: ISO 7-1, DIN EN 10226 (DIN 2999)
cutting, clean threads and extremely long service life with outstanding External pipe threads: conical, 1:16, 55° flank angle
chip discharge. Manufactured from high-quality tempered steel Q Conical pipe threads - NPT
(only available in sets 4 or 5 pieces / pack)
Taper pipe threads: ASME B1.20.1
External pipe threads: conical, 1:16, 60° flank angle
Q Cylindrical pipe threads - BSPP
Whitworth pipe threads: ISO 228-1, DIN 259
Exterior pipe threads cylindrical, 55° flank angle
Q English bolt threads - BSW
Whitworth pipe threads: british standard parallel screw
Exterior pipe threads: form B.S.W, B.S 84, 55° flank angle
For optimal threading results, use only with original Q Metric bolt threads - M
Metric threads: ISO 261, DIN 13
ROTHENBERGER cutting fluid or cutting oil (see 135)
External pipe threads: 60° flank angle
1)
140
Accessories threading
Pipe supporting column Replacement safety foot switch
Adjustable height, from 780 up to 1,200 mm For all ROTHENBERGER threading machines
with ball track. Maximum carrying capacity Q omplies with industrial associations‘ safety and accident
C
120 kg prevention requirements
Q With oil-proof rubber cable
and plug
Q Foot switch should not be
pushed all the way down
(OFF-ON-OFF)
Model Height / mm kg g No. Model kg g No.
For pipes up to 6” 780 - 1,200 5.8 56047 3 step with emergency stop switch, 230 V 2.5 56335
Pipe roughing wrench 3/8 - 2” Ratchet pipe deburrer 1/4 – 2”

Wrench made of forged steel, with hardened rolls. Quick and clean deburring
Consistent, thread-saving roughing of the entire area For steel pipes, with smooth-running ratchet, cutting
bit made of tempered steel
6
Spare deburrer bit (No. 70296)
Model mm kg g No. Model inch kg

mm g No.
Pipe roughing wrench 335 1.15 56500 Internal deburrer with ratchet 1/4 - 2” 13 - 60 2,680 70289
Replacement roughing rolls (3 pcs.) 0.30 56501 Spare deburrer 200 70296
NIPPEL MAX
NIPPEL MAX Ø 1/2 - 2”
For the production of nipples and double nipples, grips short
pipe lengths from within; hardened, sharpened gripping jaws.
For all stationary threading machines like PANDA, PISET, ROPOWER
and SUPERTRONIC .
Q Recycling pipe scraps saves money, material and time
Q Automatic quick grip of the pipe piece without the need for
additional tools
Q Pipes are gripped from within and centred:
no damage to pipe piece
Set (No. 56056) includes: nipple chuck 1/2” (No. 56060), 3/4” (No. 56061), 1”
(No. 56062), 1.1/4” (No. 56063), 1.1/2” (No. 56064), steel carrying case (No. 26410)
NIPPEL MAX set Nipple chuck 1” 0.7 56062

1/2 - 3/4 - 1 - 1.1/4 - 1.1/2” 4.4 56056 Nipple chuck 1.1/4” 0.8 56063
Nipple chuck 1/2” 0.4 56060 Nipple chuck 1.1/2” 0.9 56064
Nipple chuck 3/4” 0.5 56061 Nipple chuck 2” 1.2 56065
141
Roll grooving
Hand roll groover 1 - 12” TECHNICAL DATA
Manageable and compact hand roll groover for Working range: 1 - 12” (324 mm)
producing grooves on installed thin- and standard steel Pipe wall-thickness: 1 - 6” SCHL10 + SCHL40
pipes up to 12” (324 mm) 4 - 6” SCHL40
Suitable for installations, sprinkler systems, larger heating units, 8 - 12” SCHL10
industrial use and mining Weight: 12 kg
APPLICATION AREA Depth gauge: 2 distance plates included
Dimensions: 195 mm x 210 mm x 210 mm
For standard grooves on installed pipes from 1 - 12”
KEY FEATURES
n Forpipes from Ø 1“
n Quick connection of pipes anywhere
where welding is not allowed!
n Easy transportation due to small dimension
n Adjustable and finely-controlled arrester
n 1/2“ ratchet for both adjustment
6 Application on tripod workbench Fixture for stabiliser
Model kg
g No.
Hand roll groover 2 - 6” 12.0 1000000212

Roller set 1” 0.59 1000000720
Roller set 1.1/4 - 1.1/2” 0.62 1000000721
Roller set 2 - 6” 1.00 1000000850
Roller set 4 - 6” 2.48 1000000722
Roller set 8 - 12” 2.70 1000000723
ROGROOVER 1 - 6” Extremely light: 12 kg!

Portable rolling groover for steel pipes up to Ø 6”
(168 mm) for rapid rolling grooves on standard
and thin-walled steel pipes
Suitable for installations, sprinkler systems, larger heading units,
industrial use and mining
APPLICATION AREA
Lightweight and compact design allows for use with the
threaders:
SUPERTRONIC 2000 ROPOWER 50 R
SUPERTRONIC 2 SE SUPERTRONIC 3 SE
SUPERTRONIC 4 SE
KEY FEATURES
Q uick connection of pipes anywhere where welding isn’t allowed
Q
Q Long life and little wear
Q Easy to transport with the lightweight aluminium casing
Q Adjustable and finely-controlled arrester for consistent
groove depth
Q Convenient, easy and time-saving operation
Model No.
Model No. Support rail 2” 56510

kg g
Support rail 3” 56511
ROGROOVER for SUPERTRONIC 2000 14.5 56509 Support rail 4” 56512
ROGROOVER for ROPOWER 50 R, SC 2 SE, REX 2” 14.5 56505 Seating adaptor SUPERTRONIC 56514
ROGROOVER for SUPERTRONIC 3 SE and REX 3” 14.5 56506 Pressure roller set for ROGROOVER, 1” 56521
ROGROOVER for SUPERTRONIC 4 SE 14.5 56507 Pressure roller set for ROGROOVER, 1.1/4 - 1.1/2” 56522
ROGROOVER for RIDGID1) 300 16.0 56504 Pressure roller set for ROGROOVER, 2 - 6” 56523
ROGROOVER for REX 4” 14.5 56508 Tripod workbench 70751
142 1)
Roll grooving
ROGROOVER 1 - 12” 1)
Electro-hydraulic rolling groover for steel pipes

Ø 1 - 12” (33 - 324 mm) for rolling grooves
Product profile
Suitable for installations, sprinkler systems, larger heading units, Working range: 1 - 12” (33 - 324 mm)
industrial use and mining Pipe wall-thickness: 3 - 10 mm
KEY FEATURES Weight: 175 kg
Q Pressure rollers toolless adjustable due to revolver-button
Voltage: 110 V-50 Hz, 230 V-50 Hz / 60 Hz
Q Safe working with foot switch and emergency stop switch,
Power: 1,500 W
as well as lighting in workplace
Torque: 36 rpm
Q Reliable, powerful 1,500 W motor
Max. working pressure: 27,750 N
Q Quick and fine adjustment for groovers and regulation
Fine adjustment of groover depth

and regulation
For optimum results

Control panel
Power supply, light and

emergency stop switch Revolver-button with 6
integrated pressure rollers
Easy, fast and toolless
Surrounding steel pipe frame
Protection and carrying frame
Adjustable
pipe support stand
Ball bearing suspensions

for easy handling
Function only via foot switch
Safety for the user
3-way adjustment of the pressure Drive shaft and

rollers size measuring tape in the delivery
Set includes: ROGROOVER machine 1 -12“, pipe support stand, drive shaft,
1 - 1.1/2“, 2 - 6“ and 8 - 12“ (No. 1000002262-2264), diameter messuring tape
Model kg
g No.
Pipe support stand 33 1500001990

Diameter messuring tape 0.05 1500000134
Transport stand 25 57050
Spare spindel for Inox tube, 1 - 1.1/2“ 1.3 1000002262
Model kg
g No. Spare spindel for Inox tube, 2 - 6“ 1.7 1000002263
Spare spindel for Inox tube, 8 - 12“ 2.6 1000002264
ROGROOVER 1 - 12”, 230 V 50 Hz 175 1500001351 Spare spindel for steel tube, 1 - 1.1/2“ 1.3 1500001711
ROGROOVER 1 - 12”, 230 V 60 Hz 175 1500001352 Spare spindel for steel tube, 2 - 6“ 1.4 1500001709
ROGROOVER 1 - 12”, 110 V 50 Hz 175 1500001353 Spare spindel for steel tube, 8 - 12“ 1.7 1500001710
1)
C
7
144
Soldering & welding
Cartridge brazing 148 - 152, 154 - 155
Cartridge soft soldering 152 - 153, 155
Cylinder brazing 156 - 157
Cylinder soft soldering 158 - 159
Accessories cylinder brazing/soft soldering
QRo t
he nbe 161
Electric soft soldering 162 - 163
rg
DRA
er
Gas welding FT 164 - 167
Three-gas welding 168 - 169
QR o
r
h e
t
en
berg
Accessories soldering & welding 170 - 179
145
Soldering & welding
System overview
Cartridge brazing
SUPER FIRE 3 SUPER FIRE 4 ROFIRE ROFIRE Swivel PRO ROFIRE Swivel
Global cyclone piezo PRO twin
Soft soldering: Basic

Up to Ø 35 mm Up to Ø 35 mm Up to Ø 35 mm Up to Ø 42 mm Up to Ø 64 mm
Brazing: Hot
Up to Ø 28 mm Up to Ø 28 mm Up to Ø 28 mm Up to Ø 18 mm Up to Ø 28 mm
Special Shrinking, Shrinking,

– – –
application: removal of paint removal of paint
For use with: MAPP1) gas, MAPP1) gas, MAPP1) gas, MAPP1) gas2), MAPP1) gas2),
Maxigas 400, Maxigas 400, Maxigas 400, Maxigas 4002), Maxigas 4002),
Multigas 300 Multigas 300 Multigas 300 Multigas 3002) Multigas 3002)
Page 148 - 149 150 - 151 152 152 152
Cartridge soft soldering Roofing & sheet metal works

ROFLAME 4 ROFIRE 4 MULTI 300 propane ROOFING set
7 PIEZO ROFIRE 4 PIEZO soft soldering kit

Up to Ø 22 mm Up to Ø 22 mm  
Brazing: Hot
– Up to Ø 15 mm – –
Special Bonding of
– – Sheet metal working
application: bituminous sheeting
Propane, Propane,
For use with: Supergas C 200 Multigas 300
butane butane
Page 152 153 159 160
Cartridges
MAPP1) gas Maxigas 400 Multigas 300 Supergas C 200

Flame temperature: Up to 2,700 °C Up to 2,200 °C Up to 1,900 °C Up to 1,800 °C
Application: Soft soldering & brazing Soft soldering & brazing Soft soldering Soft soldering
Valve: 7/16” EU 7/16” EU 7/16” EU Pierceable cartridge
Content: 800 ml / 400 g 600 ml / 352 g 600 ml / 338 g 314 ml / 190 g
Page 154 155 155 155
1)
146 2)
with safety adaptor (No. 035648X)
Soldering & welding
System overview
Brazing & soft soldering devices

RE 17 ALLGAS 2000 set ALLGAS 2000 ALLGAS ROXY 400 L
PS 0.5/2 Compact Mobile Pro

Fig. similar
Soft soldering: Basic     

Brazing: Hot     
Welding: Max
0.5 - 14 mm 0.2 - 5 mm – – –
Cutting: 12 - 100 mm – – – –
Acetylene, Acetylene, Propane, MAPP gas,

1)
Maxigas 400,
For use with: oxygen, oxygen oxygen oxygen oxygen
Maxigas 400
Page 168 164 165 166 167
Cylinder brazing & soft soldering E-soft soldering

AIRPROP TURBOPROP ROTHERM 2000

7

Up to Ø 54 mm Up to Ø 54 mm Up to Ø 54 mm
Brazing: Hot
Up to Ø 22 mm Up to Ø 28 mm –
Special- Soft soldering

– –
application: without flame
Propane, Propane,
For use with: 230 V
butane butane
Page 156 157 162 - 163
Cartridges & cylinders

Acetylene Oxygen

Soft soldering
Up to 450 ºC
Basic
Application: Brazing, welding, cutting Brazing, welding, cutting

Brazing
Valve: DIN 477-1 M 10x1 (one-way) / G 3/4” RH Hot
450 ºC - 1100 ºC
Pressure: 19 bar 110 bar (one-way) / 200 bar

Gas welding
Content: 5 l, 10 l 950 ml (one-way) / 2 l, 5 l, 10 l > 1100 ºC
Max
Page 170 170
1)
147
Bonding
Cartridge brazing
SUPER FIRE 3
Ergonomic HEAVY DUTY brazing unit Hot
For brazing up to Ø 28 mm and soft soldering up to Ø 35 mm as well

as other applications such as removal of paint or shrinking of hoses
Product profile
Brazing: p to Ø 28 mm (with flame reflector in a wind
u Q Even more comfortable for longer jobs
protected environment) Q Reliable piezo ignition (up to 30,000 ignitions)
Soft soldering: up to Ø 35 mm Q Double the safety because there is no gas leakage without
locked burners (piezo ignition)
KEY FEATURES
Q Rapid material heat-up, less consumption! TECHNICAL DATA
Q Long service life Coupling: 7/16” EU
Q “Twist ‚N‘ Load” system (5 different burner available) – Handle: Aluminium, bolted
exchange of the burner with only one movement Burner: Brass / stainless steel
Q Precise flame adjustment
Q Up to 2.5 hours of brazing with one cartridge
“Twist 'N' Load”
Fast “Twist 'N' Load” system

Elaborately manufactured brass /
stainless steel design Exchange of the burners with
one movement (5 different
Long service life burners available)
7 Fine regulating valve
Precise flame adjustment
Burners with swirl flame
Rapid heat-up, less consumption!
Ergonomically designed handle
Only ignites if burner has Robust and optimum handling made

been securely locked of high-quality aluminium
Dual safety
High-performance piezo
Reliable (up to 30,000 ignitions)
Locking button
Continual use with only one hand
ROTHENBERGER MAPP1) gas
Up to 2.5 hours of brazing

with one cartridge
High flame temperature Brazing in refrigeration /

Brazing in gas installation based on cyclone swirl air-conditioning technology
148 1)
Bonding
Cartridge brazing
Pin-point burner (460 °C): SUPER FIRE 3 HOT BOX
KEY FEATURES
(No. 35455)
For fine soldering; precise and stable flame Q The ideal service kit
Q For repairs, heating installations and refrigeration /
air-conditioning technology
Standard burner (700 °C):
(No. 35456)
For soft soldering and other jobs with lower
Hot
heat application; precise, powerful and stable flame
Cyclone burner (950 °C):
(No. 35457)
For hard and soft soldering with an efficient swirl flame

(allows pipe to heat up evenly)
Hot air burner (400 °C):
(No. 35458)
For the removal of paint and for shrinking work up to
approx. 80 mm diameter; wind-stable, powerful current of hot air 5-part set (No. 1000002369) includes: handle (No. 35445), cyclone burner (No. 35457),
pin-point burner (No. 35455), flame reflector (No. 31043), universal torch support
(No. 35461), 2x MAPP1) gas A cartridges (No. 035521-A), ROCASE 4414 (No. 1000001945)
Shrinking burner (720 °C):
Model No.
7
SUPER FIRE 3 HOT BOX EU (incl. MAPP1) gas A) 1 1000002369
(No. 35459)
SUPER FIRE 3 HOT BOX EU (incl. MAPP1) gas B) 1 1000002370
For shrinking up to Ø 300 mm and for heating;
SUPER FIRE 3 HOT BOX EU (incl. MAPP1) gas C) 1 1000002371
powerful, wind-stable soft flame
SUPER FIRE 3 basic set

handle (No. 35445), cyclone burner (No. 35457)
When placing your order, remember to order the universal

torch support (No. 35461) for stationary soldering, too!
Model No.
SUPER FIRE 3 basic set 4 35436

SUPER FIRE safety adaptor 7/16” to 1” 1 035648X
No. 035648X No. 35436
ACCESSORIES
Model Model
Welding blanket 173 Fittings solder 175

Internal brushes for copper pipes 173 ROVLIES cleaning pads 173
Solder 177 - 179 ROSOL soldering paste 175
1)
MAPP is a registered trademark of the MESSER Group GmbH, Bad Soden 149
Bonding
Cartridge brazing
SUPER FIRE 4
Ergonomic brazing unit Hot
For brazing up to Ø 28 mm and soft soldering up to Ø 35 mm as

well as other applications such as removal of paint or shrinking
of hoses
Product profile
Brazing: up to Ø 28 mm (with flame reflector in a wind Q eliable piezo ignition (up to 30,000 ignitions)
R
protected environment) Q Double the safety because there is no gas leakage without
Soft soldering: up to Ø 35 mm locked burners (piezo ignition)
Q Longer handle for an even more stable positioning on the
KEY FEATURES
cartridge
Q
Rapid material heat-up, less consumption!
TECHNICAL DATA
Q “Twist 'N' Load” system (5 different burner available) –
exchange of the burner with only one movement Coupling: 7/16” EU
Q Precise flame adjustment Handle: Plastic, rubberized
Q Improved trigger locking mechanism for one-handed-operation Burner: Brass / stainless steel
Burner with swirl flame

“Twist 'N' Load”
Rapid heat-up, less consumption!
Fast “Twist 'N' Load” system
Exchange of the burner with

one movement (5 different
burner available)
Optimized fine regulating valve
7 Precise flame adjustment,
faster opening and closing
Elaborately manufactured brass / stainless steel

design
Long service life
Ergonomically
designed handle
Dual safety
Robust, light and
Only ignites if burner has
slipfree through
been securely locked
rubberized surface
High-performance piezo
Reliable (up to 30,000 ignitions)
✔ Safe Locking button

✔ Fast Continual use with only
✔ Reliable one hand
High flame temperature Brazing in refrigeration /

Brazing in refrigeration / air-conditioning technology based on cyclone swirl air-conditioning technology
150 1)
Bonding
Cartridge brazing
Pin-point burner (460 °C): SUPER FIRE 4 HOT BOX
(No. 35455)
KEY FEATURES
For fine soldering; precise and stable flame Q The ideal service kit
Q For repairs, heating installations and refrigeration /
Standard burner (700 °C): air-conditioning technology
(No. 35456)
For soft soldering and other jobs with lower
Hot
heat application; precise, powerful and stable flame
Cyclone burner (950 °C):
(No. 35457)
For hand and soft soldering with an efficient swirl flame

(allows pipe to heat up evenly)
Hot air burner (400 °C):
(No. 35458)
For the removal of paint and for shrinking work up to 5-part set (No. 1000002364) includes: handle (No. 1500001354), cyclone burner (No. 35457),
pin-point burner (No. 35455), flame reflector (No. 31043), universal torch support
approx. 80 mm diameter; wind-stable, powerful current of hot air (No. 35461), 2x MAPP1) gas A cartridges (No. 035521-A), ROCASE 4414 (No. 1000001945)
Shrinking burner (720 °C): Model No.

7
SUPER FIRE 4 HOT BOX EU (incl. MAPP gas A) 1)
1 1000002364
(No. 35459) SUPER FIRE 4 HOT BOX EU (incl. MAPP1) gas B) 1 1000002366
For shrinking up to Ø 300 mm and for heating; SUPER FIRE 4 HOT BOX EU (incl. MAPP1) gas C) 1 1000002368
powerful, wind-stable soft flame SUPER FIRE 4 HOT BOX US (incl. MAPP1) gas US) 1 1000001630
SUPER FIRE 4 basic set

handle (No. 1500001354), cyclone burner (No. 35457)
When placing your order, remember to order the universal

torch support (No. 35461) for stationary soldering, too!
Model No.
SUPER FIRE 4 basic set 1 1500001355

SUPER FIRE safety adaptor 7/16” to 1” 1 035648X
No. 035648X No. 1500001355
ACCESSORIES
Model Model
Welding blanket 173 Fittings solder 175

Internal brushes for copper pipes 173 ROVLIES cleaning pads 173
Solder 177 - 179 ROSOL soldering paste 175
1)
MAPP is a registered trademark of the MESSER Group GmbH, Bad Soden 151
Bonding
Cartridge brazing/soft soldering
ROFIRE GLOBAL
Ergonomic torch for brazing and soft soldering Hot
applications
APPLICATION AREA
Brazing: up to Ø 28 mm (with flame reflector in a wind
protected environment)
Soft soldering: up to Ø 35 mm
KEY FEATURES
Q Long service life, with cyclone effect for rapid heat-up
Q Reliable up to 30,000 ignitions
Q Protection against triggering of the Piezo ignition when falling
down accidentally
Q Precise flame adjustment
Q Durable plastic for ergonomic handling
Q Longer handle for stable positioning on gas cartridges
Model kg g No.
ROFIRE GLOBAL, 7/16”EU 250 1500002869
ROFIRE Swivel PRO cyclone piezo ROFIRE Swivel PRO twin

Cyclone burner with piezo ignition Twin cyclone burner
Coupling: 1” US Coupling: 1” US
7 Brazing: up to Ø 18 mm
Hot
Brazing: up to Ø 28 mm
Hot
EA L F O EAL FO EA L F O
D D
Soft soldering: up to Ø 42 mm Soft soldering: up to Ø 64 mm D
R
R
I
I
R
I
up to 42 mm up to 18 mm up to 64 mm
G
SO
G
SO
IN
T BR
IN
SOLDER A ZING T
F
SOLDER

kg g
ROFIRE Swivel PRO cyclone piezo US 330 35016 ROFIRE Swivel PRO twin US 400 35012
EAL FO
ROFLAME 4 PIEZO D
R
I
up to 22 mm
Ergonomic soft soldering torch for a safe

G
SO
Basic
IN
T
SOLDER
F
and comfortable usage

APPLICATION AREA
KEY FEATURES
Q Integrated pre-heat function for a stable flame, even when
turning it upside down (360°)
Q Robust metal housing for C 200 cartridges
Q 2-component rubberized plastic handle for superior ergonomics
and handling
Q Piezo ignition (up to 30,000 ignitions)
Q Precise adjustment of the flame
TECHNICAL DATA
Coupling: Pierceable connection (C 200 cartridge)
Handle: Plastic, rubberized
Burner: Stainless steel & brass
Housing: Inox burner, 2-component rubber-plastic Model No.
kg g
handle, metal cartridge housing
ROFLAME 4 PIEZO, without gas 630 1000002358
Disposable gas cartridges can be found on pages 154 - 155

152
Bonding
Cartridge soft soldering
EA L F O
ROFIRE 4 D
R
I
up to 22 mm
G
SO
Ergonomic soft soldering torch for a safe Basic
IN
T
SOLDER
F
APPLICATION AREA
Brazing: up to Ø 15 mm
KEY FEATURES
Q Precise adjustment of the flame
TECHNICAL DATA
Coupling: 7/16“-EU
Handle: Plastic
Model kg g No.
ROFIRE 4, without gas 300 1500002921

ROFIRE 4, with Multigas 300 750 1000002359
EA L F O
ROFIRE 4 PIEZO 7
D
R
I
up to 22 mm
G
SO
Ergonomic soft soldering torch for a safe Basic
IN
T
SOLDER
F
Brazing: up to Ø 15 mm Coupling: 7/16“ EU
Soft soldering: up to Ø 22 mm Handle: Plastic, rubberized
KEY FEATURES
Q 2-component rubberized plastic handle for superior ergonomics
and handling
Fine regulating valve
Q Piezo ignition (up to 30,000 ignitions)
Q Precise adjustment of the flame Precise flame adjustment
High-performance
Inox burner with Piezo
pre-heat function
Reliable up to
Applicable in all positions, 30,000 ignitions
even upside down (360°)
Integrated pre-heat function for a

stable flame, even when turning it
upside down (360°) Protective collar
Longer construction for a stable

positioning on cartridges
2-component handle
Rubberized plastic for light,

Soft soldering in drinking water and
heating installation ergonomic handling with
perfect grip
Model kg g No.
ROFIRE 4 PIEZO, without gas 300 1500002922

ROFIRE 4 PIEZO, with Multigas 300 750 1000002360
Disposable gas cartridges can be found on pages 154 - 155

153
Bonding
Cartridge brazing
MAPP1) gas
High performance brazing and soldering gas Hot
Flame temperatures up to 2,700 °C and 35 % faster than propane
Product profile
Q S uperior heat transfer, higher than propane, especially in Q Easy to use
winter below 0 °C Q Guaranteed constant top torch performance
Q Increased safety and stability based on massive brass valve Q Longer periods of use
and protective collar
Q Provides superior flame performance in any position (360°)
7/16”-EU brass valve

100 % propylene Patented design for high-pressure gases
Superior flame performance (even
upside down) and a higher heat transfer
than propane
Protective collar
Stabilizes the torch and

protects against accidental drops
Steel cylinder
Suitable for high pressure gases
SUPER FIRE 3 HOT BOX SUPER FIRE 4 HOT BOX
Packaging profile
Model MAPP1) gas
No. 035521-A
Protective collar stabilizes the torch and
EAN code 4004625400180
protects against accidental drops Product size (mm) (W x H) 70 x 270
Contents (ml) 800
Model Content No. Weight (g) 400
Unit per PU 12
MAPP1) gas 7/16”EU, A 788 ml 12 035521-A PU per layer / pallet 10
Languages: DE, GB, FR, ES, IT, PT Layer per pallet 3
MAPP1) gas 7/16”EU, B 788 ml 12 035521-B Units per pallet 360
Languages: DK, NL, SE, FI, FR, RUS Number of pallets per truckload 60
MAPP1) gas 7/16”EU, C 788 ml 12 035521-C Units per truckload 21,600
Languages: CZ, PL, HU, BG, TR, RO Pallet weight (kg) 324
Pallet size (mm) (L x W x H) 800 x 1,200 x 1,000
Torches can be found starting on 148
Carton size (mm) (L x W x H) 290 x 310 x 240
154 1)
Bonding
Cartridge brazing/soft soldering
Maxigas 400 Multigas 300
High-performance welding, cutting and brazing gas for Hot Propane / butane gas mixture for flame temperatures up to Basic
flame temperatures up to 2,200 °C. Gas cartridge with 1,900 °C. Gas cartridge with 7/16“ EU coupling thread
7/16“ EU coupling thread
Model Maxigas 400 Model Multigas 300

No. 035570-A/-B No. 035510-A/-B
EAN code 4004625355701 (A) EAN code 4004625355107 (A)
Product size (mm) (W x H) 65 x 260 Product size (mm) (W x H) 65 x 260
Content (ml) 600 Content (ml) 600
Weight (g) 352 Weight (g) 338
Unit per PU 24 Unit per PU 24
PU per layer / pallet 9 PU per layer / pallet 9
Layer per pallet 3 Layer per pallet 3
Units per pallet 648 Units per pallet 648
Number of pallets per truckload 60 Number of pallets per truckload 60
Units per truckload 38,880 Units per truckload 38,880
Pallet weight (kg) 195 Pallet weight (kg) 191
Pallet size (mm) (L x W x H) 800 x 1,200 x 1,000 Pallet size (mm) (L x W x H) 800 x 1,200 x 1,000 7
Carton size (mm) (L x W x H) 405 x 272 x 264 Carton size (mm) (L x W x H) 405 x 272 x 264
Supergas C 200 TSS

Pierceable butane cartridge with propane contents, also Basic
for working at low temperatures. Manufactured according
to EN 417:2012, with integrated Top Safe System (TSS).
This system prevents uncontrolled gas leakage when
accidentally disconnecting it from the device.
Model C 200 TSS

No. 035901-A/-B
EAN code 4004625390627 (A)
Product size (mm) (W x H) 90 x 95
Content (ml) 330
Weight (g) 190
Unit per PU 36
PU per layer / pallet 9
Layer per pallet 3
Units per pallet 972
Number of pallets per truckload 60
Units per truckload 58,320
Pallet weight (kg) 350
Pallet size (mm) (L x W x H) 800 x 1,200 x 1,180
Carton size (mm) (L x W x H) 360 x 275 x 280
155
Bonding
Cylinder brazing
EA L F O
AIRPROP D
R
I
up to 22 mm
Propane high-performance torches for brazing up to Hot BR

A ZING
Ø 22 mm and soft soldering up to Ø 54 mm
For brazing and soft soldering of copper and steel pipes up to 2,000 ºC
without oxygen, as well as warming up, shrinking and flame cleaning
Product profile
Bundled,
Q concentrated and hot flame with the built-in gas Self-induced air: Turbine and combustion chamber
turbine in brazing torch Torch: Surface treated, chromed brass
Q Absolutely gas-tight with the optimised valve technology Hose coupling: G 3/8” LH
Q Gas-saving operation with the smooth-running economy valve
Q Fast burner exchange without tools
Built-in gas turbine in brazing burner Smooth-turning Optimised valve technology

economy valve
Bundled, concentrated and hot flame Absolutely gas tight
Gas-saving operation
Shut-off valve
Prevents uncontrolled
gas escape
Absolutely gas-tight connection thanks

to dual O-ring technology
Fast burner exchange without tools
Threaded coupling Push-in nipple

M14 x 1
AIRPROP brazing burner with threaded coupling
Ø mm g/h 2 bar kWh – kcal – BTUkg g No.

No. 31092 Fig. similar mm
14 mm 140 125 1.60 – 1,375 – 5,465 95 30913
16 mm 145 180 2.30 – 3,300 – 7,885 100 30914
Sets include: safety handle with push-in coupling (No. 211121116), brazing burner 19 mm 170 300 3.84 – 3,300 – 13,115 130 30915
with push-in nipple Ø 14 mm (No. 221131416) / Ø 16 mm (No. 221131616) / Ø 19 mm
(No. 221131916), propane hose, 2.5 m with 3/8“ LH coupling (No. 32201), s afety
22 mm 171 400 5.12 – 4,400 – 26,195 145 30916
igniter (No. 32077), replacement flints (No. 32088), open-ended spanner
(No. 32073), steel case (No. 31005)
AIRPROP brazing burner with push-in nipple coupling
Model kg g No.
Ø mm g/h 2 bar kWh – kcal – BTUkg g No.
AIRPROP brazing set without propane regulator 2.8 31092 mm
AIRPROP brazing set with propane regulator 3.1 31091 14 mm 140 125 1.60 – 1,375 – 5,465 95 221131416
(No. 32081) (W 21.8 LH – G 3/8 LH) 16 mm 145 180 2.30 – 3,300 – 7,885 100 221131616
Flame cleaning torch 20/50 mm 0.2 30922 19 mm 170 300 3.84 – 3,300 – 13,115 130 221131916
22 mm 171 400 5.12 – 4,400 – 26,195 145 221132216
156
Bonding
Cylinder brazing
TURBOPROP
Propane high-performance torch for brazing up to Hot
Ø 28 mm and soft soldering Ø 54 mm

For brazing and soft soldering of copper and steel pipes up to
2,200 ºC without oxygen, as well as for warming up, shrinking
and flame cleaning
Product profile
High
Q flame temperature due to turbine with increased oxygen Self-induced air: Turbine and combustion chamber
self-induced air and 4- to 5-fold flame chamber Torch: Surface treated, chromed brass
Q Fast burner exchange without tools Hose coupling: G 3/8” LH
Q Gas-saving operation with the smooth-running economy valve
Q Shut-off valve prevents uncontrolled gas escape
Smooth-turning Optimised valve technology

economy valve
Absolutely gas tight
Gas-saving operation
Shut-off valve
Prevents uncontrolled gas

escape
4- to 5-fold flame twist for better

turbulence of the gas mixture
Higher flame temperature
Absolutely gas-tight connections

thanks to dual O-ring technology
Fast burner exchange without tools
Fig. TURBOPROP burner with push-in nipple
No. 31090 Fig. similar

Sets include: safety handle with push-in coupling (No. 211121116), brazing burner
with push-in nipple Ø 12 mm (No. 31032) / Ø 15 mm (No. 221031500) / Ø 18 mm
(No. 221031800), propane hose, 2.5 m with 3/8“ LH coupling (No. 32201), safety
igniter (No. 32077), replacement flints (No. 32088), open-ended spanner
(No. 32073), steel case (No. 31005)
TURBOPROP brazing burner with push-in nipple
Model kg g No. coupling
TURBOPROP set without propane regulator 2.8 31090 Ø mm g/h 2 bar kWh – kcal – BTU No.
mm kg g
TURBOPROP set with propane regulator 3.1 31094
(No. 32081E) (W 21.8 LH – G 3/8 LH) 12 mm 175 110 1.41 – 1,210 – 4,815 90 31032
TURBOPROP set with propane regulator 3.1 31037 15 mm 195 180 2.30 – 1,980 – 7,855 110 221031500
(No. 32083) (POL 7/8 LH – G 3/8 LH) 18 mm 230 240 3.07 – 2,640 – 10,485 160 221031800
157
Bonding
Cylinder soft soldering
MULTI 300 propane soft soldering kit
For soft soldering of copper pipes, tin and lead Basic
soldering, for tinning, warming up, flame cleaning etc.
Product profile
KEY FEATURES
Q F or all types of fine soldering in the areas of electronics and
telecommunications
Q For working with lead (gutters, laminations, roof edging,
ventilation shafts etc.)
Q Propane handle with heat insulated wooden grip
Q Rotatable air / rotary valve
for the adjustment of an especially fine flame
Q Rotatable hose coupling M10 x 1 LH
TECHNICAL DATA
Q With longer ball spindle and dual spring control
Q Favourable working pressure with 1.5 bar
7
Fig. similar
No. 35488 Fig. similar
3-part set (No. 35486) includes: soft soldering iron copper head with 350 g flat
(No. 520849), 2 m propane hose (No. 30927), small propane cylinder 0.425 kg with
Model kg g No. hook (No. 33079)
13-part set (No. 35488) includes: soft soldering iron with copper head 350 g flat
MULTI 300 set A without propane regulator 4.1 35486 (No. 520849), soft soldering torch Ø 17 mm (No. 520856) / Ø 20 mm (No. 520857), wide
torch 45 mm (No. 520845), propane regulator 0-6 bar (No. 242206000), 2 m propane
MULTI 300 set A with propane regulator 4.3 35489 hose (No. 30927), small propane cylinder 0.425 kg with hook (No. 33079), refilling ad-
(No. 242206000) aptor (No. 32207), torch spanner (No. 35530), open-ended spanner (No. 32073), safety
MULTI 300 set B 9 35488 igniter (No. 32077), replacement flints (No. 32088), steel case (No. 35487)
ACCESSORIES
Fig. similar Fig. similar
No. 520849 No. 520850 No. 520865 No. 520866 No. 520867
No. 32099 No. 32098 / 32075 No. 520856 No. 520857 No. 30927
Soft soldering iron with handle, iron torch, 940 520849 Copper head 250 g flat 270 32098
iron holder, wind protector, copper head flat 350 g Copper head 250 g pointed 270 32099
Handle with hose coupling M 10 x 1 L 300 520850 Copper head 350 g flat 370 32075
Iron burner with coupling M 15 x 1 70 520865 Soft soldering torch size 5, Ø 17 mm, M 15 x 1 70 520856
Iron holder with foot 100 520866 Soft soldering burner size 7, Ø 20 mm, M 15 x 1 120 520857
Wind protector 100 520867 Steel case 3,390 35487
Safety igniter 60 32077 Replacement flints, tin (5 pcs.) 15 32088
158
Bonding
Cylinder soft soldering
ROOFING set
Propane surface-heating torch with Ø 63 mm Basic
high-performance burner
Product profile
Ideal for roofing and asphalt work and for bonding of bituminous 600 mm burner tube
sheeting, large-scale burning of weeds, defrosting, insulation, Burner support
shrinking, drying and warming up.
KEY FEATURES
Q Large working range with 5 m propane hose
Q Efficient use even in adverse weather conditions with the
flame stabiliser
Q High-performance burner with flame stabiliser chrome plated
with a reinforced edge
Q Burner support
Ø 63 mm
m
0m
60
L=
Burner support
included!
5 m propane hose
Large working range

7
600 mm burner tube with support
5-part set (No. 30954) includes: propane handle (No. 215111216), 63 mm high-
Ideal for roofing and asphalt work and 5.0 m propane hose
performance torch (No. 223216300), 600 mm torch pipe (No. 236010000), 5 m
propane hose (No. 32203), torch support (No. 252010000)
Model No.
kg g
ROOFING set 1,920 30954

ROOFING set 2,300 30957
(as No. 30954, with pressure regulator No. 30925)
Burner support 60 252010000
Extensions
Special tube, chrome plated, angled 40°, inlet M 14 x 1,
outlet M 20 x 1

mm kg g No. mmkg g No.
100 90 231010000 350 190 233510000

200 120 232010000 600 290 236010000
Surface-heating burner heads

High-efficiency burner heads with flame stabilisers, made of special
chrome plated steel, reinforced edge. For warming up, shrinking,
insulating, hardening, general repair work etc.
Threaded M 20 x 1 coupling g/h
mm mm 2 bar kWh – kcal – BTU kg g No.
open
51 112 3800 48.60 – 41,800 – 165,970 270 223090716
63 138 6700 85.70 – 73,700 – 292,670 440 223090916
closed
45 102 2500 32.00 – 27,500 – 109,280 240 223214500
51 112 3800 48.60 – 41,800 – 165,970 270 223215100
57 126 5500 70.35 – 60,500 – 240,257 350 223215700
63 138 6700 85.70 – 73,700 – 292,670 440 223216300
159
Bonding
Safety propane handles
With economy, regulating and shut-off valves, hose coupling G 3/8“ LH
No. 211121116
Model kg g No.
Safety propane handle with push-in coupling 350 211121116

Safety propane handle with M 14x1 coupling 290 211111116
Repair kit with shut-off valve, complete 10 30101 No. 211111116
Repair kit with regulating valve, complete 10 30102
Propane regulators
Brass, for 0.5 kg, 5 kg and 11 kg cylinders
No. 32081 No. 242206000
Working Perform-
pressure ance
Inlet Outlet Bar kg/h
kg g No.
W 21.8x1/14“LH G 3/8” LH 0.5 - 4.0 8 240 32081

G 3/8” LH G 3/8” LH 0 - 6 8 200 242206000
W 21.8x1/14”LH G 3/8” LH 4 8 230 30925 No. 30925
Propane hoses
Top quality, with strong inlay, durable and flexible, mounted with
sleeves and nuts, up to 20 bar pressure (2 MPa)
No. 30927
Interior-Ø mm
m Inlet Outlet Standard Wall thickness
kg g No.
2 G 3/8”LH M 10 x 1 LH ISO 3821 4.0 x 3.5 310 30927

2.5 G 3/8”LH G 3/8” LH ISO 3821 4.0 x 3.5 350 32201
5 G 3/8”LH G 3/8” LH ISO 3821 4.0 x 3.5 730 33310 No. 32223
10 G 3/8”LH G 3/8” LH EN 1327 5.0 x 3.5 1,650 32223
160
Bonding
Propane hose cut-off valve
Nominal pressure 1.5 - 4 bar, brass, DIN / DVGW tested.
Automatic interruption of gas supply if hose is damaged or loosened,
push-button for resetting after interruption
Performance
Inlet Outlet kg/h kg g No.
G 3/8” LH G 3/8” LH 10 130 35925
Refilling adaptor
For refilling 0.425 kg propane cylinders from 3 kg, 5 kg or 11 kg
propane cylinders, brass with guide pin
7
Inlet Outlet
kg g No.
W 21.8 x 1/14” LH G 3/8” LH 160 32207
Propane steel cylinder

With cylinder valve, TÜV tested, according to TRG
Fig. similar
Model Outlet Content kg gNo.
Small cylinder 0.425 kg, with foot G 3/8”LH empty 2.75 33079
Protective collar for No. 33079 35636
161
Bonding
Electric soft soldering
EA L F O
ROTHERM 2000 D
1)
R
I
up to 54 mm
G
SO
Electric soft soldering unit up to Ø 54 mm / 2.1/8“ Basic
IN
T
SOLDER
F
Product profile
For simple, safe and time-saving soft soldering without a flame. Q Handle shell will not overheat
Particularly suitable for repair and modification work in surroundings Q No purchasing on handling of gas cylinders necessary
or rooms with a fire hazard, as well as in building refurbishment. Q Equivalent with transport terms
Soft Soldering of copper pipes: Ø 6 - 54 mm, 1/4 - 2.1/8” Q Connection on every 230 V outlet, 2 m connection cable
KEY FEATURES Q Fast return on investment
Q Power control lamp (red) and operating control lamp (green)
Q Soldering without open flame
Q Equipment fuse accessible from outside
Q Large working radius, also when working under ceilings
Q Comfortable transport and convenient use TECHNICAL DATA
Q High-performance, short soldering times Power: 2,000 W
Q Thermal overload protection turns device off automatically Soldergun cable: 4m
Weight: 10.5 kg
Soldering without open flame! Thermal overload protection 2,000 W
Automatic device shut-off High-performance,

short soldering times
Generously dimensioned stainless steel

7 cooling ribs
No overheating of the handle shells
Compact design
Highly flexible, extra long 4 m and convenient use
solder gun cable
Large working radius, also

Soldering without open flame when working under ceilings
No risk of fire from flammable walls,

floor coverings, plastic parts etc.
1)
Bonding
Electric soft soldering
ROTHERM 2000 soft soldering set
Electric soft soldering unit up to Ø 54 mm / 2.1/8“
Set (No. 36702 ) includes: ROTHERM 2000 soft soldering unit, 230 V (No. 36700), ROSOL 3
fittings soldering paste (No. 45225), fitting solder 3 (No. 45255), ROVLIES (No. 45268), internal
brushes 12 mm (No. 854181) / 15 mm (No. 854183) / 18 mm (No. 854185) / 22 mm (No. 854186)
/ 28 mm (No. 854187), steel case (No. 36715)
Particularly suitable for repair and

modification work in surroundings
or rooms with a fire hazard, as well
as in building refurbishment!
Warming up of the soldering 7

joint without open flame
Fig. similar
230 V
Model kg g 50/60 Hz
ROTHERM 2000 soft soldering set 17.8 36702

ROTHERM 2000 soft soldering unit 13.6 36700
Steel case 3.5 36715
Rod electrodes for working near to the wall or between parallel running pipes with Simple replacement of electrodes and
narrow gaps (can be ordered separately) Flat electrode electrode holders
ACCESSORIES
Model No. Model
Flat electrode (pair) 36721 ROVLIES cleaning pads 173

Flat electrode with holder (pair) 36711 Fittings solder flux 175
Rod electrodes (pair) 36720 Fittings solders 175
Rod electrodes with holder (pair) 36710 Internal brushes for copper pipe 173
163
Bonding
Gas-welding
ALLGAS 2000 set
Mobile soldering and welding torch Max
Ideal mobile soldering and welding torch for plumbers, HVAC fitters,
refrigeration technicians, automotive workshops and tinsmiths

Soldering range: up to 2.5 mm material thickness Q For use with all conventional gases and cylinder oxygen
Welding range: 0.2 - 5 mm Q Practically complete emptying of gas cylinders (money-saving)
Suitable for use with: Acetylene and oxygen Q Super compact for working in confined spaces
Propane and oxygen Q Efficient and economical professional use
CNG and oxygen
Town gas and oxygen
Low gas pressure of only 0.2 bar
Practically complete emptying of gas

cylinders (money saving) for use with all
conventional gases and cylinder oxygen
Small, very light handle (280 g)
Super compact for working in

confined spaces
7 Universal soldering and welding torch
For use with all conventional gases and

cylinder oxygen
Flexible pipe welding attachments
Economical
Safe and quick
flame positioning Efficient and economical
professional use
17-part set (No. 35300) includes: handle (No. 35303), mixing burners with union nut
Dispersion burners for warming up (No. 35304), welding tips 0.2 - 1.0 mm (No. 35305) / 1.0 - 2.0 mm (No. 35306) / 2.0 -
3.0 mm (No. 35307) / 3.0 - 4.0 mm (No 35308) / 4.0 - 5.0 mm (No. 35309), flexible
welding tips size 1 (No. 35313) / size 2 (No. 35314), coupling / union nut size 14 (No.
35315), dispersion burners (No. 35311), 2.5 m dual-hose package (No. 35221), open-en-
ded spanner size 14 x 19 mm (No. 32073), welding tip holder / spanner (No. 35312),
safety igniter (No. 32077), replacement flints (No. 32088), steel case (No. 35319)
Coupling Coupling
Model oxygen kg
fuel gas g No.
ALLGAS 2000 set (acetylene) 3,100 35300

ALLGAS 2000 handle G 1/4” RH G 3/8” LH 280 35303
Mixing burners with union nut 40 35304
Welding tips and welding attachments

Model Welding range mm
kg g No.
Welding tip size 1 0.2 - 1.0 10 35305

Welding tip size 2 1.0 - 2.0 10 35306
Welding tip size 3 2.0 - 3.0 10 35307
Welding tip size 4 3.0 - 4.0 10 35308
Welding tip size 5 4.0 - 5.0 10 35309
Dispersion burners for warming up 20 35311
Welding tip holder, can be used as a spanner 20 35312
Flexible welding tip size 1 2.0 - 3.0 40 35313
Coupling / union nut size 14 10 35315
ALLGAS 2000 set Fig. similar
Further accessories can be found on 165

164
Bonding
Gas-welding
ALLGAS 2000 PS 0.5 / 2 Compact
Portable brazing equipment with carrying frame
Max
For brazing iron, steel, sheet steel, pipes and non-ferrous metals
Product profile
Carrying comfort
KEY FEATURES
Q Secure transport in closed supporting frame
n Portable, light brazing equipment
n Ideal for mobile building-site and repair use
n Small propane cylinders can be refilled
TECHNICAL DATA
Gas: Propane and oxygen
Flame temperature: 2,850 °C Fig. similar
Working temperature: 1,150 ºC
With safety devices

to prevent flashbacks
24-part set (No. 35655) includes: ALLGAS 2000 handle (No. 35303), propane hose,
2.5 m (No. 32201), oxygen hose, 2.5 m (No. 35210), propane regulator adjustable
0 - 6 bar (No. 242206000), oxygen pressure reducer 10 bar (No. 35634), mixing bur-
ners with union nut (No. 35304), welding tips 0.2 - 1.0 mm (No. 35305) / 1.0 - 2.0 mm
(No. 35306) / 2.0 - 3.0 mm (No. 35307) / 3.0 - 4.0 mm (No. 35308) / 4.0 - 5.0 mm (No. 7
35309), flexible welding tips size 1 (No. 35313) / size 2 (No. 35314), dispersion bur-
ners (No. 35311), welding tip holder / spanner (No. 35312), multi-size spanner (No.
35738), safety igniter (No. 32077), replacement flints (No. 32088), nylon safety gog-
gles (No. 540620), small propane
cylinder 0.425 kg, empty (No. 33079), steel oxygen cylinder 2.0 l, full (No. 35635),
oxygen safety device (No. 1000000633), fuel gas safety device (No. 1000000631),
carrying frame (No. 35629)
Model No.
kg g
ALLGAS 2000 PS 0.5 / 2 Compact set 21.4 35655

Carrying frame without accessories 10.3 35629
The bottle colors shown are without obligation!
Further accessories can be found on 170 Fig. similar
ALLGAS 2000 welding tips

For brazing iron, steel, sheet steel, pipes and non-ferrous metals
Welding tips, thread M8 X 1
Model Welding range kg

mm g No.
Welding tip size 1 0.2 - 1.0 10 35305

Welding tip size 2 1.0 - 2.0 10 35306
Welding tip size 3 2.0 - 3.0 10 35307
Welding tip size 4 3.0 - 4.0 10 35308
Welding tip size 5 4.0 - 5.0 10 35309 No. 35312
No. 35311
Dispersion burners for warming up 20 35311
Welding tip holder, can be used as a spanner 20 35312
Flexible pipe welding attachments
Model Welding range kg

mm g No.

Coupling / union nut size 14 10 35315
165
Bonding
Gas-welding
ALLGAS Mobile Pro
Mobile brazing equipment with safety devices Max
For brazing of iron, steel, sheet steel, pipes and non-ferrous metals
Product profile
Q obile brazing set with a total weight lower than 6 kg
M Gas: MAPP1) gas with oxygen
incl. cartridges Flame temperature: over 3,100 °C
Q High-quality saftety devices for both gas hoses to prevent flash- Working temperature: 1,300 °C
backs
Q MAPP1) gas pressure regulator with an adjustable range
of 0 - 2 bar for a constant, low consumption and an efficient
flame adjustment
Accessories included in the set
High-quality safety devices
Reliable prevention of
gas returns and flashbacks
7 Pressure reducer 0 - 2 bar
Constant, low consumption

and efficient flame adjustment
Total weight < 6 kg
High mobility on
construction site
MAPP and oxygen
1)
Flame temperature
above 3,100 °C
High-quality rubber hoses
20 bar, EN ISO 3821

certified, length: 2.5 m
Welding and brazing torch
Including 5 interchangeable
burners and a bendable welding
attachment for a material
thickness up to 5 mm
Fig. similar
ALLGAS Mobile Pro 1” US, w/o cartridges 3.86 1000000529 Pressure regulator 1” US f. MAPP1) / LPG 0.38 1000000620
ALLGAS Mobile Pro 1” US, with cartridges 5.95 1000000743 Pressure regulator 7/16 ” EU f. MAPP1) / LPG 0.35 1000000627
ALLGAS Mobile Pro 7/16” EU, w/o cartridges 3.86 1000000642 Pressure regulator M10 x 1 f. oxygen 0.35 1000000629
ALLGAS Mobile Pro 7/16” EU, with cartridges 5.70 1000000558
MAPP1) gas 1” US, 788 ml 12 0.9 35698
MAPP1) gas 7/16” EU, 788 ml 12 0.9 035521-A
Oxygen steel cylinder, disposable, 950 ml, 110 bar 12 1.33 35750
1)
166
Bonding
Gas-welding
ALLGAS 2000 PS 0.5 / 2 Basic
Portable fitter‘s brazing equipment Max
For brazing iron, steel, sheet steel, pipes and non-ferrous metals KEY FEATURES
Q ompact and handy construction for mobile building-site and
C
repair use
Q Job compatible combination, assembled and ready to use
Space saving storage

in service vehicles!
18-part set (No. 35651) includes: ALLGAS 2000 handle (No. 35303), propane hose,
2.5 m (No. 32201), oxygen hose, 2.5 m (No. 35210), propane regulator adjustable
0 - 6 bar (No. 242206000), oxygen pressure reducer 10 bar (No. 35634), mixing
burners with union nut (No. 35304), welding tips 0.2 - 1.0 mm (No. 35305) / 1.0 -
2.0 mm (No. 35306) / 2.0 - 3.0 mm (No. 35307) / 3.0 - 4.0 mm (No. 35308) / 4.0 - 5.0
mm (No. 35309), welding tip holder / spanner (No. 35312) multi-size spanner (No.
35738), safety igniter (No. 32077), replacement flints (No. 32088), steel oxygen
cylinder 2.0 l, filled (No. 35635), propane cylinder 0.5 kg, empty (No. 33079), ALLGAS
stand (No. 35628)
Model No.
kg g
7
ALLGAS 2000 PS 0.5 / 2 Basic set 14.4 35651
Fig. similar
Further accessories can be found on 170
ROXY 400 L
Standard gas-welding equipment for Max
flame temperatures up to 3,100 °C

For brazing iron, steel, sheet steel, pipes and non-ferrous metals Space saving storage
in service vehicles!
19-part set (No. 035780X) includes: handle with fine regulating valve (No. 35580),
Maxigas 400 (No. 035570-A), oxygen cylinder 2.0 L (No. 35635), fine regulating valve
(No. 263003700), oxygen pressure reducer according to DIN 0-315 / 200 bar 0-16 /
10 bar (No. 35634), hose set, 3 m without handle (No. 35785), oxygen blowback
protection (No. 1000000633), gas blowback protection (No. 35691), mixing burners
with union nut (No. 35587), high-performance tips 1.5 mm (No. 263005600) / 2.0 mm
(No. 263005400), micro-tips 0.3 mm (No. 35712) / 0.5 mm (No. 35696) / 0.7 mm
(No. 35713), micro-tip adaptor (No. 35585), welding goggles A5 (No. 35621), safety
igniter (No. 32077), multi-size spanner (No. 35738), carrying frame (No. 35727)
Model kg g No.
ROXY 400 L, complete 10.80 035780X

ROXY 400 L without oxygen 6.0 35782
Welding-handle, M14x1 0.12 35580
Dual hose set 3 m 0.95 35785
Micro-tip adaptor 0.01 35585
Micro-tip 0.4 mm 0.01 35695
Micro-tip 0.5 mm 0.02 35696
Micro-tip 0.6 mm 0.02 35697
Micro-tip 0.7 mm 0.02 35713
High-performance tip 0.7 mm 0.06 263005800
Fig. similar High-performance tip 2.0 mm 0.04 263005400
167
Bonding
Three-gas welding
RE 17 three-gas system AMS 5/5
Assembly, welding, cutting and brazing system Max
Welding range: 0.5 - 14 mm, Cutting range: 12 - 50 mm
27-part set (No. 35400) includes: handle with coupling nut (No. 35324), welding
attachments 0.5 - 1.0 mm (No. 35325) / 1.0 - 2.0 mm (No. 35326) / 2.0 - 4.0 mm (No. 35327) /
Including gas cylinders 4.0 - 6.0 mm (No. 35328) / 6.0 - 9.0 mm (No 35329) / 9.0 - 14.0 mm (No. 35334), wing-lever
and dual-telescoping cutting attachment (No. 35338), cutting tips 12 - 25 mm (No. 35341) / 25 - 50 mm (No.
35344), heating burners 12-100 mm (No. 35339), dual hoses A/O, 5m (No. 35222),
transport trolley! acetylene pressure reducer 1.5 bar (No. 35794), oxygen pressure reducer 10 bar
(No. 35634), 2x red (No. 511428) / 2x blue protective rubber caps (No. 511427),10 piece
burners cleaning set (No. 510105), torch spanner (No. 510106), safety igniter (No.
32077), replacement flints (No. 32088), acetylene cylinder 5 l, filled (No. 35178), oxygen
cylinder 5 l, filled (No. 35188), Maxigas 400 (No. 035570-A), gas regulating valve Maxigas
(No. 1300003161), hose adaptor Maxigas (No. 35491), steel case (No. 35800), dual-
telescoping transport trolley (No. 35354),
Model kg g No.
RE 17 three-gas system AMS 5/5 50 35400

The bottle colors shown are without obligation! Fig. similar
RE 17 three-gas system AMS 5 and 10

7
Including dual-telescoping
transport trolley!
attachments 0.5 - 1.0 mm (No. 35325) / 1.0 - 2.0 mm (No. 35326) / 2.0 - 4.0 mm
(No. 35327) / 4.0 - 6.0 mm (No. 35328) / 6.0 - 9.0 mm (No 35329) / 9.0 - 14.0 mm
(No. 35334), wing-lever cutting attachment (No. 35338), cutting tips 12 - 25 mm
(No. 35341) / 25 - 50 mm (No. 35344), heating burners 12 - 100 mm (No. 35339), dual
hoses A/O, 5 m (No. 35222), acetylene pressure reducer 1.5 bar (No. 35794), oxygen
pressure reducer 10 bar (No. 35634), 2x red (No. 511428) / 2x blue protective rubber
caps (No. 511427), 10 piece burners cleaning set (No. 510105), torch spanner
(No. 510106), safety igniter (No. 32077), replacement flints (No. 32088), gas
regulating valve Maxigas (No. 1300003161), hose adaptor Maxigas (No. 35491),
steel case (No. 35800), dual-telescoping transport trolley (No. 35354)
Model kg g No.
RE 17 three-gas system AMS 5 + 10 23 35403

RE 17 three-gas system AMS 10/10

attachments 0.5 - 1.0 mm (No. 35325) / 1.0 - 2.0 mm (No. 35326) / 2.0 - 4.0 mm
(No. 35327) / 4.0 - 6.0 mm (No. 35328) / 6.0 - 9.0 mm (No 35329) / 9.0 - 14.0 mm
(No. 35334), wing-lever cutting attachment (No. 35338), cutting tips 12 - 25 mm
(No. 35341) / 25 - 50 mm (No. 35344), heating burners 12 - 100 mm (No. 35339), dual
hoses A/O, 5 m(No. 35222), acetylene pressure reducer 1.5 bar (No. 35794), oxygen
pressure reducer 10 bar (No. 35634), 2x red (No. 511428) / 2x blue protective rubber
Including gas cylinders caps (No. 511427), 10 piece burners cleaning set (No. 510105), torch spanner
and dual-telescoping (No. 510106), safety igniter (No. 32077), replacement flints (No. 32088), acetylene
cylinder 10 l, filled (No. 35179), oxygen cylinder 10 l, filled (No. 35189), Maxigas
transport trolley! 400 (No. 035570-A), gas regulating valve Maxigas (No. 1300003161), hose adaptor
Maxigas (No. 35491), steel case (No. 35800), dual-telescoping transport trolley (No.
35354)
Model kg g No.
RE 17 three-gas system AMS 10/10 66 35401

The bottle colors shown are without obligation! Fig. similar RE 17 as in No. 35401, cutting range 12 - 25 mm 65 35798
168
Bonding
Three-gas welding
RE 17 UNIVERSAL pipe welding set
For welding, cutting, brazing and warming up Max
Set (No. 35479) includes: handle with coupling nut (No. 35324), welding attach-
ments 2.0 - 4.0 mm (No. 35327) / 4.0 - 6.0 mm (No. 35328) / 6.0 - 9.0 mm (No.
35329), flexible pipe-welding tips 2.0 - 4.0 mm (No. 35347) / 4.0 - 6.0 mm (No.
35348), wing-lever cutting attachment (No. 35338), cutting tip 12 - 25 mm (No.
35341), heating burners 12 - 100 mm (No. 35339), nozzle cleaning set, 10 piece (No.
510105), torch spanner (No. 510106), safety igniter (No. 32077), replacement flints
(No. 32088), steel case (No. 35800)
Model kg g No.
RE 17 pipe welding set 4.3 35479

RE 17 pipe welding set 4.8 35480
as in set (No. 35479), but also including with No. 35480 Fig. similar
welding attachments 0.5 - 1.0 mm (No. 35325) /
1 - 2 mm (No. 35326), cutting tip 12 - 25 mm
(No. 35341) / 25 - 50 mm (No. 35344)
Steel case RE 17 (empty) 1.70 35800
RE 17 handle with burner coupling nut 0.47 35324
Coupling: oxygen G 1/4” RH, gas G 3/8” LH
No. 35324
RE 17 welding attachments
7
Welding range mm kg g No.
Welding attachment 0.5 - 1.0 140 35325

RE 17 welding attachments, bendable Pipe welding attachment, front piece
Pipe welding attachment,

complete Flexible copper tips
Welding Welding
kg
range mm g No. kg
range mm g No. Pipe welding attachment, complete
1.0 - 2.0 40 35475

2.0 - 4.0 140 35347 2.0 - 4.0 40 35476
4.0 - 6.0 150 35348 4.0 - 6.0 50 35477
RE 17 wing-lever cutting attachment

Model kg g No.
Cutting attachment without tips 820 35338
RE 17 cutting tips and heating burners

Cutting range No. 35338
Model mm kg g No.
Cutting tip 12 - 25 10 35341

Cutting tip 25 - 50 20 35344 No. 35341
Cutting tip 50 - 100 20 35345 No. 35344
Heating burners 12 - 100 50 35339 No. 35345 No. 35339
169
Bonding
Accessories soldering & welding
Oxy-acetylene hoses
Top quality in accordance with ISO 3821 (former EN 559), with strong
inlay, durable and flexible, rubber, mounted with sleeves and nuts
Oxygen hoses
Internal Ø x
m Inlet Outlet Wall thickness kg g No.
2.5 G 1/4” RH G 1/4” RH 4 x 3.5 0.5 35210

5.0 G 1/4” RH G 1/4” RH 4 x 3.5 1.1 33311
Dual hoses A/O

Inlet/Outlet Inlet/Outlet Interior Ø x
m Oxygen Acetylene Wall thickness kg g No.
2.5 G 1/4” RH G 3/8” LH 6.3 x 3.5 0.9 35221

5.0 G 1/4” RH G 3/8” LH 6.3 x 3.5 2.0 35222
10 G 1/4” RH G 3/8” LH 6.3 x 3.5 3.8 35223
Lightweight steel cylinders, filled

With cylinder valve and cap (5 l and 10l ), TÜV tested in accordance
with TRGI
Filling pressureHeight Ø
Model Contents bar mm mm kg
g No.
Oxygen 950 ml 110 340 70 12 1.33 35750

Protective bracket inclu- Oxygen 2 l 200 420 110 4.6 35635
ded in delivery Oxygen 5 l 200 595 145 14.0 35188
for steel cylinders
Oxygen 10 l 200 980 145 17.0 35189
without cap,
Acetylene 5 l 18 595 145 13.0 35178
Acetylene 10 l 18 980 145 23.0 35179
Cylinder transport trolley

Portable and mobile, for 5 and 10 l acetylene / oxygen cylinders,
5 kg and 12 kg propane cylinders can be used with conversion kit
(special accessory). Coupling for disposable Maxigas 400 cartridges,
dual-telescoping for different cylinder heights, brackets for ALLGAS
and RE 17 steel cases
Model kg g No.
Transport trolley for 8.9 35354

5 / 10 l acetylene / oxygen cylinders
170
Bonding
Cylinder pressure reducer
Robust pressed brass construction according to EN ISO 2503 with
large pressure gauge according to ISO 5171, with shut-off and
safety valves. Acetylene cylinder pressure reducer with bow coupling
according to DIN 477-1
No. 35634
Cylinder contents Working pressure
bar bar Inlet kg
Outlet g No.
Fig. similar
Oxygen
0 - 200 0 - 10 G 3/4”RH G 1/4” RH 1.4 35634 No. 35794
Acetylene
0 - 40 0 - 1.5 Bow G 3/8” LH 1.6 35794 Fig. similar
Blowback prevention
Safety devices (flashback arrestors) according to EN 730-1 and ISO
5175-1, type tested, with flame arrestor (FA) and non-return valve (NV).
No. 540360 and No. 540365 are additionally equipped with a
temperature-sensitive cut-off valve (TV) and filter
max. working Coupling No. 1000000633 No. 540360 No. 1000000764

Model pressure kg g No.
Handle-mounted, oxygen 25.0 bar G 1/4” RH 150 540360

Handle-mounted, acetylene 1.5 bar (ace) G 3/8” LH 160 540365
5.0 bar (propane/CNG)
Reducer-mounted, oxygen 25.0 bar G 1/4” RH 120 1000000633
Reducer-mounted, fuel gas 1.5 bar (ace) G 3/8” LH 120 1000000631 7
Handle, oxygen 20.0 bar G 1/4” RH 100 1000000764
Handle, fuel gas 1.5 bar (ace) G 3/8” LH 100 1000000762 No. 1000000631 No. 540365 No. 1000000762
Protective guard for pressure reducer

Impact protection, rugged steel construction,
mounts on connection coupling
Model Color
kg g No.
For acetylene pressure reducer yellow 820 35140
Protective rubber cap

With slot, open
Model Color
kg g No.
For oxygen pressure reducer blue 50 511427

Fig. similar
For acetylene pressure reducer yellow 50 511428
Oxygen refilling bend

Suitable for all 0.67l, 2l, 3l, 5l, 10l, 20l and 50l bottles up to 200 bar
Model kg g No.
max. 200 bar, cylinder coupling G 3/4“ 360 35199
Safety igniters
Powerful spark, wear-free hard alloy friction surface
Model kg g No.
Safety igniter 60 32077

Replacement flints, tin, 5 pcs. 15 32088 No. 32077 No. 32088
171
Bonding
Hand-held welding mirror
Model kg g No.
Steel wire handle with clamp / ball joint 280 540850

No. 540850 Spare steel mirror 50 540851
Magnet welding mirror

Model kg g No.
No. 540855
With flexible metal tube / ball joint 450 540855
Spare steel mirror 50 540851
Burners cleaner
Model kg g No.
Burners cleaner, in folding case, 11 pcs. 20 510105
Torch spanner
Model kg g No.
7 With 10 wrench sizes 210 510106
Soldering flux and container for

hydrochloric acid
Model kg g No.
With screw cap retaining band for 150 ml content 40 530250
Ammonia stone
For cleaning of copper pieces after soft soldering
Model L x B x H kg g No.
Ammonia stone, pressed 65 x 45 x 40 mm 15 530310
Welding goggles EN 166

With thermal glasses as per EN 169
Model Glas kg g No.
Nylon safety goggles A4 60 540620

No. 540620 No. 540622 A5 60 540621
clear, non-splintering 60 540622
Replacement glass (pair) A4 30 540625
A5 10 540626
clear, non-splintering 30 540627
Screw-ring safety goggles A4 90 540640
Replacement glass (Ø 50 mm) A4 30 540675
No. 540640
172
Bonding
ROVLIES cleaning pads
Metal-free, for fast, score-free cleaning of
copper pipe soldering surfaces
KEY FEATURES
Q Reduced corrosion damage
n No metal abrasion, can be used wet or dry
Q Removes oxide layers, corrosion, surface dirt,
oil and grease residues
Q Solvent-resistant and flexible
Model kg g No.
ROVLIES (10 pcs.) 80 45268

ROVLIES counter display (36 pcs.) 2,180 045268D
Internal brushes for copper pipe

For fast cleaning of the soldering surface with rugged plastic handle

mm No. mm No.
kg g kg g
7
12 80 854181 22 140 854186
15 100 854183 28 140 854187
18 120 854185
Fig. similar
Hand wire brushes

Model Number of rows
kg g No.
Standard steel 3 rows 130 561351
Welding blanket Flame reflectors

Flame and heat resistant up to 840 °C Q Made of high-quality stainless steel
Q P ermanent heat resistance up to 700 °C by direct flame contact Q Protects surrounding materials
and molten slag Q Better heat utilisation, saves time and energy
Q Good
formability, long service life, asbestos-free and
poses no health hazard
Q Bonded edges
Thickness: 1.4 mm
Weight: 1,000 g/m2
Width Adaptor Ø
Model mm mm kg g No.
Model LxWxH kg g No.
65 / 15 65 8 – 15 100 31042
Welding blanket 500 x 330 x 5 mm 300 31050 65 / 22 65 15 – 22 100 31043
173
Bonding
Fitting soft solder according to EN standard

Standard Solder
Melting
Suitable for soft soldering in the plumbing industry Recommended heat source
type composition
range Cartridge burner, heat resistant
according to in weight % Pipe Fittings Recommended flux
°C soldering unit, propane / induced-air
EN 9453 material material according to EN 94454-1
burner, acetylene / induced-air burner,
S -Sn97Cu3 Sn 97, Cu 3 230 - 250 Copper Copper, gunmetal, brass Part 1 - 3.1.1, 3.1.2, 2.1.2 or ROSOL 3 larger pipe diameters above 28 mm
with propane / oxygen burner with
S -Sn97Ag3 Sn 96.7, Ag 3.3 221 - 240 Copper Copper, gunmetal, brass Part 1 - 3.1.1, 3.1.2, 2.1.2 or ROSOL 1 S dispersion burners
Standard solder according to EN ISO standard

Standard Solder Suitable for installation technology brazing Recommended flux Recommended heat source
type composition Melting Working according to
according to in weight % range temperature Pipe Fittings Flux EN 1045
ISO 17672 °C °C material material
Copper FH 10
without flux
CuP 179 Cu 94 / P 6 710 - 890 760 Copper Gunmetal with flux
or
Brass LP 5
Copper FH 10
Gunmetal without flux
CuP 279 Ag 2 / Cu 91,8 / P 6,2 645 - 825 740 Copper with flux or
Brass
LP 5
Cartridge torch with MAPP1) gas,
Copper FH 10
Gunmetal without flux
CuP 281 Ag 5 / Cu 89 / P 6 645 - 815 710 Copper with flux or Propane / induced-air torch,
Brass LP 5
Acetylene / induced-air torch,
Copper FH 10
without flux
CuP 284 Ag 15 / Cu 80 / P 5 645 - 800 700 Copper
Gunmetal or Larger pipe diameters above 28 mm
Brass with flux
LP 5 with propane / oxygen torch with
dispersion burners
Steel, Copper with flux FH 10
Ag 34 / Cu 36 / Zn 27,5 / Steel
Ag 134 630 - 730 710 Copper
Gunmetal (U = sheathed or
Sn 2,5 Brass LP 5
from 22 mm pipe-Ø)
Steel, Copper with flux FH 10

Ag 45 / Cu 27 / Zn 25,5 / Steel
Ag 145 640 - 680 670 Gunmetal (U = sheathed or
Sn 2,5 Copper
Brass from 22 mm pipe-Ø) LP 5
7
Soldered joints
Material Required hard solder Melting range Working temperature Standard
Copper-Copper S 34 Cu / S 34 Cu U 630 °C - 730 °C 710 °C

S 94 710 °C - 890 °C 760 °C
EN ISO 17672
S2 645 °C - 825 °C 740 °C
(former DIN EN 1044)
S5 645 °C - 815 °C 710 °C
S 15 645 °C - 800 °C 700 °C
Copper-Carbon steel
S 34 Cu / S 34 Cu U 630 °C - 730 °C 710 °C EN ISO 17672
S 45 Cu / S 45 Cu U 640 °C - 680 °C 670 °C (former DIN EN 1044)
Copper-Brass S 94 710 °C - 890 °C 760 °C

S2 645 °C - 825 °C 740 °C EN ISO 17672
S5 645 °C - 815 °C 710 °C (former DIN EN 1044)
S 15 645 °C - 800 °C 700 °C
Brass-Carbon steel
Brass-Brass S 94 710 °C - 890 °C 760 °C

S2 645 °C - 825 °C 740 °C EN ISO 17672
S5 645 °C - 815 °C 710 °C (former DIN EN 1044)
S 15 645 °C - 800 °C 700 °C
Carbon steel-Carbon steel

1)
174
Bonding
Fittings solders
Quality soft solders according to EN 9453 for joining copper pipes
to copper, gunmetal and brass fittings for hot and cold-water
plumbing in accordance with DVGW worksheet GW 2 without
flux, for use with corresponding ROSOL fittings solder paste
Fitting solder 1 S
Quality soft solder S-Sn97Ag3, melting range 221 °C - 240 °C,
for use with ROSOL 1 S fittings solder paste
No. 45252
Solder wire Ø Description kg g No.
2 mm 250 g coil 270 45252

3 mm 250 g coil 270 45250
Fitting solder 3
Quality soft solder, S-Sn97Cu3, melting range 230 °C - 250 °C,
for use with ROSOL 3 fittings solder paste
Solder wire Ø Description kg g No. 7

2 mm 250 g coil 270 45257 No. 45257
3 mm 250 g coil 270 45255
ROSOL soldering paste

Quality soft soldering flux according to EN ISO 9453 and
EN 29454-1, 3.1.1.C, with DVGW test mark Reg.-No.
DV-0101AT2247, for joining copper pipes to copper, gunmetal
and brass fittings for hot and cold-water plumbing in accordance
with DVGW worksheet GW 7, metal content 60% by weight,
flux residues are 100% water soluble
No. 45220 No. 45225
ROSOL 1 S ROSOL 3
Fittings solder paste Fittings solder paste
Quality soft soldering flux, metal content: S-Sn97Ag3, Quality soft soldering flux, metal content: S-Sn97Cu3, only
only for use with fitting solder 1 S for use with fittings solder 3
Model
kg g No. Model
kg g No.
ROSOL 1 S in plastic bottle 250 g 270 45220 ROSOL 3 in plastic bottle 250 g 270 45225
Fittings soft solder flux

According to EN ISO 9454-1-3114, flux residues are 100 % water
soluble, for joining copper pipes to copper, gunmetal, and brass
fittings for hot and cold-water plumbing in accordance with DVGW
worksheet GW 2 and GW 7, also suitable for general-purpose
soldering work.
Model
kg g No.
Fittings soft solder flux in plastic jar 35 ml 35 45266
175
Bonding
Hard solder rings S 2
High-quality safety solder material with silver-phosphorus
content, guaranteed according to EN ISO 17672, CuP 279
KEY FEATURES
Q Ideal for capillary soldering with copper pipe installation in
sanitary and heating systems
Q Matched precisely to the inner pipe diameters of expanded
sockets and fittings according to EN 1254
Q Complete wetting of soldering gaps
Q Particularly efficient working through precise solder quantity
Q No preparatory or rework of the soldered joint
TECHNICAL DATA
Alloy (weight %): Ag 1.5 - 2.5 / P 5.9 - 6.5 / Cu rest
Melting range: 650 °C - 810 ºC
Joinable materials: Copper, gunmetal, brass, bronze
Use of flux with: Gunmetal, brass, bronze with
hard solder paste LP 5
Package size: 250 g plastic bag
Simply heat, no
Precise quantity of dripping, no reduction
Simple insertion solder of cross-section
Model approx. Content rings
kg g No.
Hard solder rings S 2, Ø 12 mm 395 pcs. 260 40512

7 Hard solder rings S 2, Ø 15 mm 244 pcs. 260 40515
Hard solder paste LP 5

Flux for hard soldering at working temperatures above 600 °C,
according to EN 1045, type FH 10, DVGW tested Reg.-No.
DV-0101-AT2245, for gas and water installations with copper pipes,
recommended by DVGW in accordance with worksheets GW 2 and
GW 7, hard solders with silver content and usable with any basic
materials of steel, copper and copper alloys, brass and gunmetal,
working temperature range 500 °C - 800 °C, flux residues must
be removed carefully
Model Content kg g No.
LP 5 in plastic bottle 160 g 160 g 180 40500
Hard solder powder HKM

Flux for hard soldering at working temperatures above 800 °C,
according EN 1045 - FH 21, working temperature 800 °C - 1,100 °C,
for copper and copper alloys, brass, gunmetal, nickel silver, bronze,
steel and galvanised steel, grey iron and malleable cast iron, for
welding copper and brass in dry conditions, can be mixed with clean
water to form a paste, flux residues must be removed carefully.
Free of boric acid.
Model Content kg g No.
HKM in plastic bottle 50 g 65 35611
176
Bonding
Hard solders
For copper pipe installation
ROTHENBERGER ROLOT special hard solders are particularly suited for
copper pipe installations in cold and hot water systems, for open and
closed heating systems, for gas installations in accordance with DVGW
Worksheet GW 2 (liquid, natural and town gas) as well as for HVAC
and refrigeration applications, and oil pipes. ROTHENBERGER ROLOT is
especially suited for capillary soldering of copper pipes without fittings.
Copper / phosphorus / silver solders are highly formable, and are
therefore recommended for joints that are subjected to high thermal and
mechanical alternating loads.
KEY FEATURES
Q Non-foaming
Q Heat-resistant up to 200 °C
Q No flux required with copper / copper joints
(except S34 and S45)
Q Manufactured with new, environmentally compatible
technology, corrosion neutral, scale-free, improved flow properties
ROLOT S 94 CuP 179

Quality hard solder guaranteed according to EN ISO 17672, due
to low phosphorus content, the solder has a wide melting range,
and creates soldered joints with increased strength. Standard solder
for normally-stressed copper pipe installation, especially for capillary 7
soldering with copper pipe installation without fittings
TECHNICAL DATA Content Squared section Lengthkg No.

g
Alloy (weight %): Cu 94 / P6 mm mm
Melting range: 710 - 890 °C
Working temperature: 760 ºC 1 kg carton 2x2 500 1,025 40094
Flux required with: Gunmetal, brass, bronze with LP 5
ROLOT S 2
Special quality hard solder, not standardised, similar to EN ISO
17672, with low silver content, matched to normally-stressed copper
pipe system, ideal for capillary gap soldering
TECHNICAL DATA
Melting range: 700 - 850 °C Square section Length
Working temperature: 750 °C Content mm mm kg g No.
Flux required with: Gunmetal, brass, bronze with hard 1 kg carton 2x2 500 1,025 40202
solder paste LP 5
ROLOT S 2 CuP 279

Silver / phosphorus safety hard solder, guaranteed according to
EN ISO 17672, for higher-stressed copper pipe systems, ideal for
capillary soldering in sanitary, heating and gas installations
TECHNICAL DATA
Alloy (weight %): Ag 2 / Cu 91,8 / P 6,2 Square section Length
Melting range: 645 - 825 °C Content mm mm kg g No.
Working temperature: 710 °C
Joinable materials: Copper, gunmetal, brass, bronze 1 kg carton 2x2 500 1,025 40212
Flux required with: Gunmetal, brass, bronze with hard 1 kg carton 3x3 500 1,025 40213
solder paste LP5
177
Bonding
ROLOT S 5
Particularly high-quality hard solder, not standardised, similar to
EN ISO 17672, with low silver content, ideal for capillary and joint
soldering in sanitary, heating and gas installations
TECHNICAL DATA
Square section Length Melting range: 710 - 840 °C
Content mm mmkg g No. Working temperature: 750 °C
1 kg carton 2x2 500 1,025 40502 Flux required with: Gunmetal, brass, bronze with hard
solder paste LP5
ROLOT S 5 CuP 281

High-quality silver/phosphorus safety hard solder, guaranteed
according to EN ISO 17672, for higher-stressed copper pipe
systems, ideal for capillary and joint soldering in sanitary, heating
and gas installations
TECHNICAL DATA
Square section Length Alloy (weight %): Ag 5 / Cu 89 / P 6
7 Content mm mmkg g No. Melting range: 645 - 815 °C
1 kg carton 2x2 500 1,025 40005 Joinable materials: Copper, gunmetal, brass, bronze
Flux required with: Gunmetal, brass, bronze with hard
solder paste LP5
ROLOT S 15 CuP 284

Particularly high-quality silver hard solder, guaranteed according
to EN ISO 17672, especially for capillary-gap soldering subject to
high thermal and mechanical alternating loads in HVAC systems as
well as demanding sanitary and gas installations
Square section Length TECHNICAL DATA

Content mm mmkg g No. Alloy (weight %): Ag 15 / CU 80 / P 5
Melting range: 645 - 800 °C
1 kg carton 2x2 500 1,025 40015 Working temperature: 710 °C
Flux required with: Gunmetal, brass, bronze with hard
solder paste LP5
178
Bonding
Silver hard solders Ag 134
S 34 Cu U flux-covered
Free of cadmium, quality silver hard solder guaranteed according
to EN ISO 17672, flux-covered according to EN1045 FH 10,
universal application areas for gap soldering, also for drinking
water installations, heat-resistant up to 200 °C
TECHNICAL DATA
Alloy (weight %): Ag 34 / Cu 36 / Zn 27.5 / Sn 2.5
Melting range: 630 °C - 730 °C
Joinable materials: Steel, malleable cast iron, copper,
gunmetal, copper and nickel alloys
S 34 U
Content mmkg g No.
100 g plastic bag 2 110 44915

250 g plastic bag 2 260 44916
1000 g plastic bag 2 1,010 44917
Silver hard solders Ag 145

S 45 Cu / S 45 Cu U flux-covered
Free of cadmium, quality silver hard solder, guaranteed according
7
to EN ISO 17672, flux-covered according to EN 1045, Type FH 10,
universal application areas for gap soldering, excluding drinking
water installations, heat-resistant up to 200 °C
TECHNICAL DATA
Alloy (weight %): Ag 45 / Cu 27 / Zn 25.5 – 3.5 / Sn 2.5
Melting range: 640 °C - 680 °C
Joinable materials: Steel, malleable cast iron, copper,
gunmetal, copper and nickel alloys,
stainless steel
S 45 U
Content mmkg g No.
100 g plastic bag 2 110 45055

250 g plastic bag 2 260 45056
179
8
180
Testing and
leak detection
System overview 182
Testing of water lines and containers
Testing pumps 183 - 185
Testing of gas and water lines
Digital testing device 186 - 187
Analogue testing device 188
Accessories testing devices 189
Testing of waste water lines
Leakage testing in accordance with DIN EN 1610 190
Leak detection
Leak detection on water lines 190
Leak detection on gas lines 191
Leak detection spray on gas lines 191
8
181
Testing and leak detection
System overview
Precision testing pumps manual

RP 50-S / RP 50-S INOX TP 25 RP 30

Testing and pressure range: 0 - 60 bar 0 - 25 bar 0 - 30 bar
Hub suction capacity: 45 ml / stroke 16 ml / stroke 16 ml / stroke
Tank capacity: 12 l 7l 4.5 l
Connection: R1/2” R1/2” R1/2”
Dimension: 495 x 165 x 255 mm 380 x 215 x 156 mm 440 x 200 x 240 mm
Weight: 8 kg 4.6 kg 4.5 kg
Material: DURAMANT coated steel DURAMANT coated steel ABS plastic
Valve: Twin-valve Twin-valve –
Pressure gauge units: bar, psi, Mpa bar, psi bar, psi
Suitable for: Oil, water and glycol Oil, water and glycol Oil, water and glycol
Page 183 185 185
Analogue / digital testing device

Testing pumps electric for gas and water connections
RP PRO III ROTEST GW ROTEST GW
150/4 Digital V3

Testing and pressure range: 0 - 40 bar Pressure range: 0 - 180 mbar 0 - 1,000 mbar
Flow rate: 6 l / min. Low pressure sensor (resolution 0.1 mbar) (resolution 0.1 mbar)
Tank capacity: – Pressure range: 0 - 4 bar 0 - 20 bar
Connection: R1/2” High pressure sensor (resolution 0.1 bar) (resolution 0.01 bar)
Dimensions: 375 x 290 x 300 mm Leak rate measurement: – 0 - 12 L/h
Weight: 16 kg Display resolution: – 480 x 272
Material: ABS plastic Data transfer: – WLAN, USB
Valve: Single valve Battery life time: – Approx. 8 h testing time
Pressure gauge units: bar, psi, Mpa Safety class: – IP40
Gauge characteristics: Glycerine cushioned Weight: 7.3 kg 5.25 kg
Suitable for: Oil, water and glycol
Page 184 Page 188 186
182
RP 50-S / RP 50-S INOX Adjustment of the pressure gauge
1)
Robust precision testing pump for pressure testing of with 0.1 bar scaling is possible!
water lines and containers up to 60 bar with very high
testing standards
Product profile
Pressure testing with water or oil of piping in residential and Testing and pressure range: 0 - 60 bar, with 1 bar steps
industrial construction, as well as for industrial containers (up to 0 - 860 psi, with 20 psi steps
60 bar). Expansion possible with an extra fine scaling pressure 0 - 6 MPa, with 0.1 MPa steps
gauge (0.1 bar) for testing up to 16 bars Hub suction capacity: approx. 45 ml / stroke
KEY FEATURES Tank capacity: 12 l
n A drag indicator displays the preset pressure so that a loss of
Connection: R 1/2“
pressure in the system can be detected easier
n Reliable and precise testing results: the dual-valve system
Container RP 50-S: Steel, DURAMANT coated
(Twin Valve) enables self-testing of the pump as well as a Container RP 50-S INOX: Stainless steel
precise fine adjustment of the pressure
n Especially precise reading as needed: finely scaled (scaling
0.1 bar) pressure gauge available separately
Warp-resistant and lockable lever
n Testing hose with steel mesh prevents reading mistakes, that
can happen when the hose expands during operation Ergonomic handle serves as carrying grip too
n Type 50-S: Weather and cold-resistant steel container with
DURAMANT coating
n Type 50-S INOX: high-quality corrosion resistant stainless Additional pressure gauge with
steel tank fine scaling 0.1 bar optional
Enables very precise readings

up to a range of 16 bar
Testing hose with steel mesh (No. 61316)
Precise measurement
Weather and cold-resistant

container
5 year rust-free guarantee -

DURAMANT coated
INOX
No. 60200
Double valve system: enables Optional: Extra fine scaling

self-testing of the pump, as Pressure gauge for the testing
well as a precise fine adjustment of of systems up to 16 bar with a
No. 60203 the pressure 0.1 scaling
Model
kg g No.
RP 50-S testing pump 8 1 60200

RP 50-S INOX (stainless steel) testing pump 8 1 60203
ACCESSORIES
Model No. Model No.

kg g kg g
Maintenance package 100 60201 High pressure hose with 1/4“ connection 490 R6112500
Double nipple 1/2“ to 3/4“ 100 60999 Extra 16 bar pressure gauge 100 61316
1)
C
RP PRO III 1)
Self-priming electric testing pump up to 40 bar
Product profile
Electrical testing pump for the automatic pressure testing of Testing and pressure range: 0 - 40 bar, with 1 bar steps
piping and containers up to 40 bar in accordance with national 0 - 570 psi, with 20 psi steps
and international standards 0 - 0.1 MPa steps
Flow Rate: max. 6 l / min
KEY FEATURES
n Comfortable, automatic filling and pressure testing of piping Connection: R 1/2“
and containers
Mains voltage: 220 - 240 V / 50 HZ and
n Compact and robust plastic casing for simple handling at the
110 V / 50 - 60 HZ
building site
Performance: 1.3 kW
n Liquid supply freely selectable: optional self-priming up to a
Container: ABS-plastic
maximum of 1 m or from a pressure source. Suitable for oil,
water and glycol
n Testing hose with steel mesh prevents reading mistakes,
that can happen when the hose expands during operation
n Glycerine cushioned pressure gauge absorbs pressure surges
which makes pressure reading easier
Optimal weight distribution
Comfortable to carry
Valve for pressure adjustment
Precise labelling on handle

Thermal automatic shutdown
Glycerine pressure gauge Prevents overloads and damage

to the pump
Easy for the user to read during
high dynamic alternating loads
8
Installation diagram on unit
Eases the direct connection
Function overview
No. 61185
Direct overview of the functions
Model kg g110 V 220 V
Testing pump RP PRO III self-priming 16.0 V12110016 61185

with power cable, high-pressure hose
and 1/2”connection, filling hose
Filling hose with adaptor 0.5 61001
Testing hose with R 1/2”connection 0.4 V12102000
Maintenance package RP PRO III 61186
in scope of delivery
1)
TP 25 1)
Small, robust precision testing pump for pressure testing

up to 25 bar
Product profile
APPLICATION AREA
Pressure testing with water or oil of piping in residential and
industrial construction as well as for industrial containers up to
25 bar in accordance with international and national standards
KEY FEATURES
n Reliable and precise testing results: the dual-valve system
(Twin Valve) enables self-testing of the pump, as well as a
precise fine adjustment of the pressure
n Weather and cold-resistant steel container with For the daily work on site
DURAMANT coating
TECHNICAL DATA
Testing and pressure range: 0 - 25 bar
Hub suction capacity: approx. 16 ml / stroke
Container: Steel, DURAMANT coated
Model Pressure range kg

g No.
Testing pump TP 25 up to 25 bar 4.6 1 60250

Maintenance package TP 25 60251
8
RP 30
1)
Simple and light testing pump for compression testing
up to 30 bar
Product profile
APPLICATION AREA
Pressure testing with water or oil of piping in residential and
industrial construction as well as for industrial containers up to
30 bar in accordance with international and national standards
KEY FEATURES
n Shock and corrosion resistant ABS plastic container with
reinforced floor
TECHNICAL DATA
Testing and pressure range: 0 - 30 bar, with 1-bar steps Easy, light and handy: for all common
0 - 440 psi, with 20 PSI steps house building applications
Hub suction capacity: 16 ml / stroke
Container: ABS-plastic
Model Pressure range kg

g No.
Testing pump RP 30 up to 30 bar 4.5 1 61130

High pressure hose with 1/4“ connection 0.4 R6112500
1)
C
ROTEST GW Digital V3 1)
Leakage testing system for gas and water lines with WiFi
large 4.3” touchscreen display for an easy handling and

integrated documentation of all tests up to 20 bar.
Product profile
Q 4.3“ Touchscreen or physical buttons for an easy handling Display resolution: 480 x 272
Q Pressure and leakage testing for gas pipelines according to TRGI 2018 Data transfer: USB, WiFi
Q L eak rate measurement for gas pipelines according to TRGI 2018 Battery life time: approx. 8 h testing time,
mains operation possible
and DVGW 5952
Pressure range:
Q P ressure and leakage testing for drinking water pipelines
Low pressure sensor: Pressure range 0 – 1,000 mbar
according to DIN EN 806-4 (resolution 0.1 mbar / hPa)
Q Testing of gas pressure regulators High pressure sensor: Pressure range 0 - 20 bar / 0 - 2 MPa
Q Long-term measurement up to 72 hours (resolution 0.01 bar / 0.001 MPa)
Q ODATA Software and RODATA App for documentation and data
R Leak rate measurement: Leak rate 0 – 12 l / h
managment of all test results (resolution 0.1 l / h)
Safety class: IP40
Weight: 5.25 kg
Only available in Germany, WiFi transmitter

Austria and Italy! Easy data transfer to
mobile devices and PCs
4.3” Touchscreen
Easy and clear handling

8
All-in-One
High- and low-pressure sensor from

1 mbar/hPa up to 20 bar / 2 MPa
in one device
No. 1500002677
Pressure and leakage testing for gas pipe-

lines according to TRGI 2018 Testing of gas pressure regulators
GW Digital basic unit incl. power plug, software disk with RODATA V3 software
(No. 1500002851), 2x hose 2m low pressure (No. 1500002846), 1x hose 2m high pressure
+ shut-off valve (No. 1500002845), 2x gas test plug cylindrical size 2 (No. 351272),
2x adaptor 1/2“ to NW5 plug (No. 1500002876), adaptor 1/8“ to NW5 plug
(No. 1500002853), adaptor nozzle pressure to NW5 plug (No. 61018), air pump
(No. 1500002848), double bellow (No. 1500002847), shut-off valve NW5 (No. 61017),
supply end cap (No. 61041)
Model No.
ROTEST GW Digital V3 – Set gas / water 1500002677
1)
ROTEST GW Digital V3 - RoData V3 PC-Software
PC software for data management of all tests carried out
Product profile
Q Creation of a log with graphical representation of the test process RoData V3 PC-Software:
Q Management of measurement data – overview of all measure- Compatibility: Windows 2000, XP, 7, 8, 10
ments stored per customer Size: 16.2 MB
Q Customer administration – import of VCard files (.vcf) possible
Q Testing management – clear allocation of one employee per test
Q Data transmission via USB cable or WiFi connection possible
Overview of measurement series with graph Management of measurement series = RoData V3 Sample log according to DIN EN 806-4 with diagram
ROTEST GW Digital V3 - RoData Mobile App 8

App for the data management of all tests carried out
Product profile
Q Simple, quick and professional documentation RoData Mobile App:
Q Log ready for immediate use as a PDF Compatibility: iOS 8.0 or newer, Android 4.4 or newer
Q Suitable for iOS and Android devices Size: 11 MB
Q Measurement data transfer via WiFi
Q User-defined company profile set-up in the log
Q Ready-made logs for various measurement types
(leak testing, usability testing, etc.)
Sample log according to DIN EN 806-4 Measurement overview Start screen RoData Mobile App
with measurement value table RoData Mobile App
187
ROTEST GW 150/4
1)
Analogue testing device for gas and water connections

using air as the medium
Product profile
Analogue testing unit for the implementation of the following tests: Pressure gauge: 4 bar / 0.4 MPa
Gas: Load and leakage test for newly installed gas lines Water column: 180 mbar / hPa
in accordance with DVGW-TRGI worksheet G 600 Testing accuracy: Water column 0.1 mbar / hPa
(October 2018) (Reading accuracy in accordance with TRGI)
Leakage test from propane liquid gas lines / Pressure gauge 0.1 bar / 0.01 MPa
low-pressure liquid gas lines (Display range 0 - 4 bar / 0 - 0.4 MPa)
Adjustment of the duct pressure on atmospheric
burners and forced-air burners
Testing of the appliance connection pressure on
gas appliances
Water: Pre-testing and testing of newly installed drinking water
lines in accordance with DIN 1988 (TRWI)
Legible scaling
KEY FEATURES
n Quick and precise pressure reading over water column Continuous scaling
up to 150 mbar
without electronic
n Testing time and pressures in accordance with
DVGW-TRGI and TRWI clearly arranged on unit cover
n Sturdy unit: High reliability when used on the building site
Measurement chart in unit

DVGW-TRGI worksheet G 600 Testing times and testing
(October 2018) conforming! pressure from lawmakers
at a glance
Inspection glass
Water level control
Foam inlay
High transport safety and

protection of the components
Compact measuring station
Designed to serve in real-life

situations through quick, exact gas
pressure measurements
Testing scale up to 150 mbar

on transparent extending tube Transparent tube element with dou-
element ble o-ring seal
Model in combination with basic unit kg g No.
with 5 test plugs and supply end cap 7.6 61700

with 5 test plugs without supply end cap 7.3 61701
1)
Set components
Model kg g No.
Pressure pump ROTEST GW 150/4 0.30 61011

Bellow f. ROTEST GW 150/4 0.06 61014
Shut-off valve NW5 socket/plug 0.20 61017 No. 61017 No. 61018 No. 61041 No. 1500002845
Adaptor nozzle pressure to NW5 plug 0.20 61018
O-ring set (6 pcs.) GW 150/4 0.04 61030
Supply End Cap f. ROTEST GW 150/4 0.38 61041
1/8” adaptor to NW5 plug 0.10 1500002853
1/2” adaptor to NW5 plug 0.50 1500002876
Tube element (4 pcs.) GW 150/4 1.10 61702
Measurement fluid, blue, GW 150/4 0.10 351257 No. 61702
Hose 2 m high pressure + shut-off valve 0.20 1500002845 No. 1500002846
Hose 2 m low pressure ROTEST GW 0.20 1500002846
Double bellow GW Digital V3 0.10 1500002847
Air pump GW Digital v3 0.14 1500002848
CD RODATA V3 for ROTEST GW Digital V3 0.02 1500002851
Shut-off valve NW5 socket/socket 0.17 1500002852 No. 1500002851 No. 1500002852 No. 1500002853 No. 1500002876
Gas test plug / adaptor

Suitable for gas lines up to 1.5 bar
Steel exterior Copper exterior

Model pipe Ø inch pipe Ø mmkg g No.
Conical shape with pneumatic connection

Size 0 3/8 - 1/2” 15 - 18 45 351260
Size 1 1/2 - 1” 22 - 28 80 351261
Size 2 3/4 - 1.1/4” 35 - 42 125 351262
Size 3 1.1/4 - 2” 54 - 64 175 351263
Steel exterior Copper exterior 8

Cylindrical shape with pneumatic connection

Size 1 3/4” 22 60 351271
Size 2 1” 28 75 351272

Conical shape with hose coupling

Size 0 3/8 - 1/2” 15 - 18 200 351220
Size 1 1/2 - 1” 22 - 28 300 351221
Size 2 3/4 - 1.1/4” 35 - 42 300 351222
Size 3 1.1/4 - 2” 54 - 64 400 351223

Conical shape with 2 ball valves

Size 1 1/2 - 1” 22 - 28 260 351231
Size 2 3/4 - 1.1/4” 35 - 42 420 351232
Size 3 1.1/4 - 2” 54 - 64 700 351233

Model Pipe Ø inch Rohr Ø mmkg g No.
Conical shape with 1 ball valve

Size 0 3/8 - 1/2” 15 - 18 200 351225
Size 1 1/2 - 1” 22 - 28 350 351226
Size 2 3/4 - 1.1/4” 35 - 42 390 351227
Size 3 1.1/4 - 2” 54 - 64 600 351228
With double plug valve - with hose snout

Model kg g No.
Adaptor/cut-off valve with pn. connection 290 351265
189
Testing of waste water lines
House connection test set
Set for testing in accordance with DIN EN 1610 and 1986
in combination with GW Digital (version 2.1 or newer)
Product profile
Testing balloon and accessories for the leakage testing of ground n andy set: One testing and sealing balloon for the most common
H
water piping using air in accordance with DIN EN 1610 and DIN pipe diameters (included in set are diameters 75 - 150 mm,
1986, part 30. Suitable for nominal diameters of 65 to 250 mm additional balloons available in accessories)
n Easier positioning of the balloon, even in hard to reach places
using various push and filling rod sizes
n Body material is made out of aluminium and eases the
positioning of the testing balloon through the pipe system
n Sturdy balloons made of natural rubber are temperature, use
and waste water resistant. If the balloon becomes damaged,
a simple repair is possible
TECHNICAL DATA
Maximum operating pressure: 1.5 bar
Push rod length: 10 m
11-part house connection test set (No. 61340) includes:

sealing balloon NW 75-150 (No. 61352), testing balloon NW 75-150 (No.
1500002856), filling hose (No. 61365), test valve, filling valve (No. 61367), push rod
(No. 61380), holding rope (No. 61368), upright pump with pressure gauge (No.
No. 61340
61369), plastic case (No. 61370), cover (No. 91123), plastic case inlay for upright
pump (No. 91122)
Model kg
g No. Ø Testing/sealing balloon Testing balloon No. Sealing balloon No.
House connection test 7.8 61340 Ø 65 - 100 mm 61358 –

Ø 75 - 150 mm 1500002856 61352
Ø 90 - 250 mm 1500002857 61353
8
ROLEAK Aqua 3Plus

1)
Easy to use leak detection device with acoustic signal

for pipe systems
Product profile
n Leak detection for various pipe materials n Digital wireless connection to headphones
n Amolifies flow noise for exact detection of leaks n Possibility to connect an external microphone
n Bluetooth connection for a better and clear noise transmission
to headphones. This also allows to control the volume with
the handunit
TECHNICAL DATA
3-staged Frequency filter: 1. Stage: 0 - 540 Hz
2. Stage: 540 - 4,000 Hz
3. Stage: 0 - 4,000 Hz
Operating time: ca. 15h Li-Ion Battery
Weight: 250 g (Handheld device)
Level of protection: IP 41
Acoustic leak detection
of heating installations
Improved sound compared with

previous models!
6-parts Set (No. 1500003533) includes: basic unit, headphones, magnetic adaptor,
2 x extensionstick, tripod-adaptor, ROCASE 4414
Model kg g No.
ROLEAK Aqua 3Plus 3.1 1500003533

External groundmicrophone 0.5 1500003535
1)
Leak detection on gas lines
1)
ROTEST Electronic 4
Leak detection on gas lines
Product profile
F or the detection of gas in room as well as leaks in pipes. Detects: atural gas, propane, butane, methane,
N
Detects all flammable methane based gases acetone, alcohol, ammonia, benzyl, ethylene,
gasoline, hydrogen, industrial solvents, jet fuel,
KEY FEATURES paint thinner, naptha, toluene
n Leaks are optically as well as acoustically displayed Sensitivity: < 50 ppm – 1 Vol % (Methan)
n With the help of the 42 cm long, flexible testing head and the
integrated lamp, even dark and hard to reach places can be tested
n Quick and precise leak location of even the smallest leak source:
The sensitivity of the unit can be adjusted continuously in a
range from < 50 ppm - 1 Vol %
n Shock-proof soft case jacket and simple one-handed operation
of the unit for use on the building site
Finds leaks easily

ROTEST Electronic 4, 2x AA battery in ROCASE 4212 (No. 1300003334)
Model kg g No.
ROTEST Electronic 4 1.25 1000003199
ROTEST
Leak detection on gas lines Highly sensitive foam spray:
Quick and reliable location of leaks! DVGW-tested
Product profile Reg.-No. NG-5170CL0063
APPLICATION AREA

Ideal for detecting leaks in gas-filled lines, gas cylinders or
containers. When a leak is present a blister forms.
KEY FEATURES
n Simple use - always ready to use
n H
ighly sensitive foaming spray for a quick and reliable
locating of leaks
TECHNICAL DATA
Detects gases (for example natural gas, inflammable gas, air)
The leak detection spray is neutral against the most common
inflammable gases and refrigerants. The only reaction is the
building of foam
Model Content
kg g No.
ROTEST leak detection spray 400 ml 470 12 65000
1)
C
9
192
Freezing
System overview 194
Freezing electric
Pipe freezing systems 194 - 197
193
Freezing
System overview
Freezing electric
ROFROST Turbo R290 1.1/4” ROFROST Turbo R290 2”
Working range Cu: 10 - 42 mm (3/8 - 1.3/8“) 10 - 54 mm (3/8 - 2.1/8”)
Working range Fe: 1/8 - 1.1/4” 1/8 - 2”
Reduction inserts: up to 12 pcs. up to 15 pcs.
Freezing hose: 2.5 m 2.5 m
Refrigerant: R290 R290
Page 194 - 195 194 - 196
ROFROST Turbo R290 1.1/4” / ROFROST Turbo R290 2”

Pipe freezing system for copper, steel and stainless steel
Flexible refrigerant hoses
Work in confined spaces

and store the hoses inside
the unit
Heat conductive paste

9
Simple clamping system Enables freezing without
continouse spraying of the
For use even in confined
pipe
spaces
Wide application area
A range of pipe sizes can be

frozen using the supplied
pipe inserts
Compact design
Tough powder coated metal case

with soft-grip handle makes the
machine highly mobile and ideal
for service work
The use of heat conductive paste guarantees The freezing process starts automatically after Compact freeze clamp design allows the pipe
optimal freezing installing the freezing clamps to be frozen - even close to the wall
194
Freezing
Freezing electric
ROFROST Turbo R290 1.1/4”
1)
Pipe freezing system for copper,

steel and stainless steel
Product profile
Maintenance, repair and expansion work in sanitary and Future-proofed
n due to the change of the environmentally friendly
heating installations refrigerant R290
Copper pipes: Ø 10 - 42 mm ROFROST Turbo R290 1.1/4” Compact freezing clamps and shortened thermometer allow
n
Ø 3/8 - 1.3/8” ROFROST Turbo R290 1.1/4” working on confined spaces
The use of heat conductive paste guarantees an optimum icing.
n
Steel pipes: Ø 1/8 - 1.1/4” ROFROST Turbo R290 1.1/4” It prevents air pockets between the freezing clamps and pipe.
The pipe does not need to be sprayed with water
Reduction inserts in various sizes for all common pipe diameters
n
Model kg g 230 Volt 50 Hz
ROFROST Turbo R290 1.1/4“

with reduction inserts size II, III, V, VII, IX, XII (see ROFROST reduction insert overview) + heat conductive paste 23.5 1500003000
Expansion set for ROFROST Turbo with reduction inserts size II, III, V, VII 62230
additional sets upon request
1)
C
Freezing
Freezing electric
ROFROST Turbo R290 2”
1)
Pipe freezing system for copper,

steel and stainless steel
Product profile
aintenance, repair and expansion work in sanitary and
M Future-proofed
n due to the change of the environmentallly friendly
heating installations refrigerant R290
Copper pipes: Ø 10 - 54 mm ROFROST Turbo R290 2” Safe freezing: Thermometer on the freezer clamp indicates
n
Ø 3/8 - 2.1/8” ROFROST Turbo R290 2” when the pipe is completely frozen
The use of heat conductive paste guarantees an optimum icing.
n
Steel pipes: Ø 1/8 - 2“ ROFROST Turbo R290 2” It prevents air pockets between the freezing clamps and pipe.
The pipe does not need to be sprayed with water
Reduction inserts in various sizes for all common pipe diameters
n
Model kg g 230 Volt 50 Hz
ROFROST Turbo R290 2“

with reduction inserts size II, III, V, VII, IX, D, E, F (see ROFROST reduction insert overview) + heat conductive paste 24.3 1500003001
Expansion set for ROFROST Turbo with reduction inserts size II, III, V, VII 62230
additional sets upon request
1)
Freezing
Freezing electric
ROFROST App
The ROFROST App supports safe work and the freezing process will be explained step by step.
Application instructions Freezing parameter Timer
Application instructions Freezing parameter Timer

Check if you have performed Select the freezing parameter Start the freezing process with
the following steps the following parameters:
ROFROST Turbo R 290 1.1/4“

Pipe material Copper (Cu)
Pipe diameter Ø 22
1. Waterflow interrupted? ROFROST Turbo R 290 1.1/4“ recognized

Serial number 3108180080055 Recommended minimum freezing time:
2. Select the suitable reduction inserts?
Pipe material Copper (Cu) 14 minutes
3. Heat conductive paste used?
Pipe diameter Ø 22
4. Correct mounted clamp at the pipe?
5. Switched on the ROFROST Turbo R 290? Recommended minimum freezing time:
14 minutes
14:00
Next step Apply freezing parameter Start timer
i i i
Imprint Imprint Imprint
Checklist for the freezing process The recommended freeze time is displayed The integrated timer will respond after the freezing time
by adjusting the material and diameter has elapsed
ROFROST Turbo reduction inserts
ROFROST Turbo 1.1/4” reduction inserts ROFROST Turbo 2” reduction inserts

Size kgFe
Nominal size Cu Nominal size Cu Nominal size g No. Size Nominal size Cu Nominal size Cu kg Fe
Nominal size g No.
Size I 10 mm 3/8” 1/8” 190 62217 Size A 28 mm - 3/4” 190 62231

Size II 12 mm 1/2” - 180 62211 Size B - 1.1/8” - 180 62232
Size III 14/15 mm - 1/4” 170 62212 Size C 32 mm 1.1/4” - 170 62233
Size IV 16 mm 5/8” - 170 62219 Size D 35 mm 1.3/8” 1” 170 62234
Size V 18 mm - 3/8” 165 62213 Size E 42 mm - 1.1/4” 165 62235
Size VI 20 mm 3/4” - 155 62224 Size F - - 1.1/2” 155 62236
Size VII 22 mm 7/8” 1/2” 145 62214 Size G 54 mm 2.1/8” - 145 62237
Size VIII - 1” - 125 62226
Size IX 28 mm - 3/4” 110 62215
Size X - 1.1/8” - 90 62227
Size XI 32 mm 1.1/4” - 80 62221 The reduction insert size E, 42 mm serves as an adaptor piece for
Size XII 35 mm 1.3/8” 1” 65 62216 fitting ROFROST Turbo 1.1/4” reduction inserts size I – size XII
ROFROST heat conductive paste Heat conductive paste enables fully

For a perfect automatic freezing without spraying!
freezing result
Description Contents
kg g No.
No. 62291 ROFROST heat conductive paste 150 ml 130 1 62291
197
10
198
Inspection and locating
Video inspection
ROSCOPE mini 202
ROSCOPE i2000 203
Inspection modules for ROSCOPE i2000 204 - 205
Locating module ROLOC Plus 206
ROSCOPE i2000 and ROCAM 4 Plus app 207
ROCAM 4 Plus 208 - 209
ROCAM 4 Plus accessories 209 - 211
10
199
System overview
ROSCOPE family
ROSCOPE mini ROSCOPE i2000 modules

ROSCOPE mini Module TEC Module 25 / 16 Module 25 / 22 Module
ROLOC PLUS
Application: Hollow spaces Hollow spaces Ø 50 -100 mm Ø 40 -100 mm Locating of sondes
Display size: 2.5” 3.5” 3.5” 3.5” 3.5”
Touchscreen: –    –
Cable length: 1.2 m 1m 16 m 22 m –

10 Cable-Ø: 5.5 mm 9 mm 8.5 mm 5.5 mm –
Camera head-Ø: 8.5 mm 17 mm 25 mm 25 mm –
Self levelling: 180°   – –
Transmitter: – –  – –
Frequency: – – 512 Hz – 512 and 640 Hz, 33 kHz
Picture format: JPG JPG JPG JPG –
Picture resolution: 320 x 240 pixel 320 x 240 pixel 320 x 240 pixel 320 x 240 pixel –
Video format: – AVI AVI AVI –
Video resolution: – 320 x 240 pixel 320 x 240 pixel 320 x 240 pixel –
Storage: On-board SD-card SD-card SD-card –
WiFi: –    –
Protocol feature: – – – – –
Audio-recording: –    –
Data handling: – via app via app via app –
Page 202 204 205 204 206
200
System overview
ROCAM 4 Plus
AND TABLET
APP FOR SMARTPHONE
NG
EDITING AND TRANSFERI
GES AN D VID EOS .
OF IMA
D ANDROID!
AVAILABLE FOR iOS AN
ROCAM 4 Plus
ROCAM 4 Plus ROCAM 4 Plus ROCAM 4 Plus
30 m 65 m mini module

25 mm camera head: – – 40 -100 mm
30 mm camera head: Ø 70 -150 mm Ø 70 -150 mm –
40 mm camera head: Ø 100 -300 mm Ø 100 -300 mm –
Display size: 10.4” 10.4” 10.4”
Touchscreen:    10
Cable length: 30 m 65 m 8 m / 16 m
Metre counter:   
Cable-Ø: 7 mm 7 mm 5.5 mm
Self levelling:   –
Transmitter:   –
Frequency: 33 kHz 33 kHz –
Picture format: JPG JPG JPG
Picture resolution: 720 x 600 pixel 720 x 600 pixel 720 x 600 pixel
Video format: AVI AVI AVI
Video resolution: 720 x 600 pixel 720 x 600 pixel 720 x 600 pixel
Storage: SD-card SD-card SD-card
WiFi:   
Protocol feature:   
Audio-recording:   
Data handling:   
Page 208 209 209
*
More information at cordless-alliance-system.com 201
Video inspection
ROSCOPE mini
1)
RO
BOX
A constant companion – by having an extremely compact design, it can be stowed tidily into
every tool case. Minor works, like the inspection of hollow spaces are not a challenge anymore.
The combination of its robust construction with modern technology makes it a tool for every toolbox.
Product profile
The ROSCOPE mini is perfect for an easy and quick inspection of Dimensions: 152 x 90 x 40 mm
minor works. Blockages in drainages, pipelines, shower and bath Display size: 2.5“
connections, gutters and hollow spaces can be easily inspected. Cable length: 1.2 m
KEY FEATURES Cable-Ø: 5.5 mm
� Intuitive handling with the first touch Cable head-Ø: 8.5 mm
� The Ø 8.5mm camera head and the 120 cm camera cable are Leveling: 180°
perfect for minor works and are maximizing the pace of work Storage: 30 pictures
� Electronical 180° rotation for the perfect perspective
in every situation
� Waterproofed camera head
� Tool less mounting of accessories like the magnet or 90° mirror
Ø 8.5 mm waterproof
camera head
Adjustable illumination Perfect working conditions

in small diameters
7 light levels for best
lighting conditions
1.2 m camera cable
For quick and easy inspection
180° rotatable picture Included belt clip
Fast and precise analysis on a 2.5“ Comfortable wear

display with triple zoom
Space-saving storage
10
Camera cable can be easily wound
up around the housing
Intuitive handling
Self-explanatory service
in live and review mode Accessories included
Integrated magnet for catching

metal pieces and mirror for the
perfect view in a 90° bow
Magnet-accessory
Quick inspection of hollow spaces Always ready to hand,

before and after installations due to handy belt clip Mirror-accessory
Set (No. 1000002268) includes: ROSCOPE mini basic unit, mirror and magnet
accessories, 4x AA batteries, ROBOX B2350 (No. 1500002641)
Model No.
ROSCOPE mini set 1000002268
1)
Complete terms and conditions at rothenberger.com/roservice.
202 RO SERVICE+ only valid in participating countries.
Video inspection
ROSCOPE i2000
1)
SD
Inspection and locating technology combined in one WiFi USB
unit with multiple functions. Modular system allows

for various applications.
Product profile
The ROSCOPE i2000 covers almost all inspection techniques Display: 3.5“ touchscreen (color)
within living and working spaces. Camera and locating modules Video format: AVI
allow a multifunctional use. WiFi technology enables a quick and Picture format: JPEG, 320 x 240 pixels
easy data transfer.
Connection: Mini-USB, AV-Out, SD-card slot
KEY FEATURES Power supply: Li-Ion battery 3.7 V / 5.2 Ah
� User-friendly touchscreen monitor and simple menu guidance
n Easy data transfer for subsequent processing
n Audio recording and playback possible without further Compatible connection
equipment
Previous ROTHENBERGER modules
n USB charging function
can be used
Versatile and WiFi
user-friendly! Easy data transfer to mobile devices
3.5“ touchscreen SD-card slot
320 x 240 pixel resolution (JPEG) Memory space for audio, video
and image data
Ergonomic handling
Function keys arranged closely together Integrated microphone
Integrated speaker
For audio playback

Slip-free handle
For comfortable and effort saving

operation - even over long periods
of time
Powerful Li-Ion battery
For an extra long battery life

10
and short charging times
Modular concept:
4 different modules for the ROSCOPE i2000
basic unit, for visual inspection of pipes and hollow
spaces as well as locating of pipes and sondes.
ROSCOPE i2000 App Module TEC Module 25 / 16 and 25 / 22 Module ROLOC PLUS
App for smartphone and tablet to edit Self-leveling camera for the Waterproof pipe module for pipe Easy to use pipe and sonde
and send recorded image data inspection of hollow spaces and hard inspection in 90° bends from locating device incl. precise depth
to reach areas Ø 40 mm to 100 mm measurement
1)
omplete terms and conditions at rothenberger.com/roservice.
C
RO SERVICE+ only valid in participating countries. 203
Video inspection
ROSCOPE i2000 module TEC 1)
Self-levelling camera head

High-performance camera for the inspection of hollow WiFi
spaces and hard to reach areas
Product profile
KEY FEATURES
� User-friendly touchscreen monitor and simple menu guidance
n Self-levelingcamera head
n Recording and playback of the inspection on video (AVI)
or photo (JPEG)
n Waterproof camera head as per IP 68
TECHNICAL DATA
Display: .5“ touchscreen (color) (technical data
3
about basic unit available on page 208) No. 69615
Camera head: Ø 17 mm, self-leveling and waterproof,
with 4 LED lights
Brightness: 100 LUX (0.5 m)
Cable length: 1m
Power supply: Li-Ion battery 3.7 V / 5.2 Ah
Weight: 0.9 kg Camera head with
Inspection of hollow spaces high-performance LEDs
Set ROSCOPE i2000 module TEC (No. 1500000696) includes: ROSCOPE i2000 basic
unit, module TEC, charger, ROCASE 4212, foam inlay
Model No.
ROSCOPE i2000 module TEC 1500000696

Module TEC (without basic unit) 69601
Set (hook, magnet, mirror) 69615
ROSCOPE i2000 module 25 / 22 Cable length:

1)
High-performance camera for the inspection of pipes 22 m! WiFi
from ø 40 up to 100 mm
Product profile
10 KEY FEATURES
�
Recording and playback of the inspection on video (AVI)
or photo (JPEG)
n Extremely flexible camera head for 90° bends starting from
Ø 40 mm
TECHNICAL DATA
3
about basic unit available on page 192)
Camera head: Ø 25 mm, waterproof, with 8 LED lights
Brightness: 100 LUX (0.5 m)
Cable length: 22 m
Cable diameter: 5.5 mm
Power supply: Li-Ion battery 3.7 V / 5.2 Ah
Weight: 3.1 kg
Inspection of rain downpipes Inspection of floor drains
Set ROSCOPE i2000 module 25 / 22 (No. 1000000860) includes: ROSCOPE i2000 basic unit,
module 25 / 22, module TEC, charger, plastic carrying case
Model No.
ROSCOPE i2000 module 25 / 22 + module TEC 1000000860

Module 25 / 22 (without basic unit) 69603
Guidance ball for module 25 / 16 and 25 / 22 74629
1)
Video inspection
ROSCOPE i2000 module 25 / 16
1)
High-performance camera for the inspection of pipes WiFi
from Ø 50 up to 100 mm. With an integrated trans-

mitter for the precise locating of the camera head.
Product profile
�
Recording and playback of the inspection on video (AVI) Display: .5“ touchscreen (color) (technical data
3
or photo (JPEG) about basic unit available on page 208)
n Extremely flexible camera head for 90° bends starting Camera head: Ø 25 mm, self-leveling and waterproof,
from Ø 50 mm with 4 extra bright LED lights
n Can be used with guidance ball up to Ø 100 mm Brightness: 125 LUX (0.5 m)
n Self-leveling picture Cable length: 16 m
n Integrated transmitter for the precise locating of the camera head Cable diameter: 8.5 mm
n ROSCOPE i2000 basic unit can also be used as control unit Frequency: 512 Hz
for the ROLOC PLUS locating module Power supply: Li-Ion battery 3.7 V / 5.2 Ah,
2 AA batteries (transmitter)
Weight: 3.9 kg
WiFi
Simple locating of the Easy data transfer
camera head with the to mobile devices
integrated transmitter! Integrated transmitter
For the precise locating

of the camera head
3.5” touchscreen
320 x 240 Pixel resolution
Self-leveling camera head
Picture is always upright,

no loss of orientation
Battery compartment
For the power supply of the

integrated transmitter
(2 AA batteries included
in delivery)
10
Guidance ball for module

25 / 16 and 25 / 22
For centring of the

camera head, better
illumination of the pipe
Rubberized base
Stable stand without slipping

and damaging the surface
Inspection of access line Inspection of rain drainpipes
No. 74629
Set ROSCOPE i2000 module 25 / 16 (No. 1000000842) includes: ROSCOPE i2000 basic unit,
module 25 / 16, module TEC, charger, plastic carrying case
Model No.
ROSCOPE i2000 module 25 / 16 + module TEC 1000000842

Module 25 / 16 (without basic unit) 1500000052
Guidance ball for module 25 / 16 and 25 / 22 74629
1)
omplete terms and conditions at rothenberger.com/roservice.
C
Video inspection
ROSCOPE i2000 module ROLOC PLUS 1)
Easy to use pipe and sonde locating device.

Available as a complete unit as well as locating
module for the ROSCOPE i2000 basic unit
Product profile Also for use with

ROCAM 4 Plus
KEY FEATURES
� Pin-point location of the sonde
n Precise depth measurement
n Different frequencies can be chosen
n
Simple and clear menu design guides step-by-step through
the locating process
n Telescopic function makes transporting in case easier
TECHNICAL DATA
3
about basic unit available on page 208)
Frequencies: 512 and 650 Hz, 33 kHz active / passive,
50/60 Hz passive
Power supply: Li-Ion battery 3.7 V / 5.2 Ah Simple menu
Dimensions: 95 x 32 x 30 cm (operating mode) guidance
67 x 32 x 9 (transportation mode)
Guides step-by-step
Weight: 1.4 kg to targeted position
Multi-frequencies
Locating of the
most common Telescopic function
camera heads
For easier transport
in case
10
Depth measurement
Pin-point location of
Easy to use pipe and sonde locating device incl. precise depth measurement the transmitter position
Target is left of the running direction.

Correction of your direction to the left Depth measurement with a push
is necessary. of the button
Set ROSCOPE i2000 module ROLOC PLUS (No. 1000000065) includes: ROSCOPE i2000
basic unit, module ROLOC PLUS; module TEC, charger, plastic carrying case
Model No.
ROSCOPE i2000 module ROLOC PLUS 1000000861

+ module TEC
Module ROLOC PLUS (without basic unit i2000) 1500000057
1)
Video inspection
ROSCOPE i2000 and ROCAM 4 Plus app
App for smartphone and tablet to edit and send
recorded image data
Product profile
� WiFi-transmitter allows a image transfer live from the ROSCOPE i2000:
ROSCOPE i2000 to mobile devices Compatibility: iOS 5.1 or newer, Android 4.0 or newer
n Integrated editing function to mark and name specific Size: 4.1 MB
pipeline damages
n Synchronizing of stored images of the ROSCOPE i2000 ROCAM 4:
to allow further processing Compatibility: iOS 8.1 or newer, Android 4.0 or newer
n Sending of edited pictures directly from the place of action Size: 12 MB
Live Image Editing Display Album
Picture and video

Album recording Settings / notes Editing
Change to edit settings
n Color palette
10
n Pen and rubber
Available for iOS n Text
and Android! n Rectangle, circle, arrow
Inspection of basin drains Sending of edited pictures directly from the place of action
207
Video inspection
ROCAM 4 Plus - 30 m 2) 1)
SD
Inspection camera for pipes from Ø 40 – 300 mm with 30 m WiFi
30 or 65 m cable length, with integrated software for

documentation and large removable 10.4“ touchscreen.
Product profile
� Picture editing, change of camera settings and menu Picture and video format: JPG / AVI (resolution 720 x 600)
guidance via the 10.4“ color-touchscreen Camera head: Ø 25 mm, waterproof with 8 LEDs
� Direct recording of pictures (JPG) or video (AVI, resolution Ø 30 mm, self-levelling and waterproof
720 x 600) as well as editing options (e.g. documentation with 10 LEDs
of damage) Ø 40 mm, self-levelling and waterproof
� Fast data recording with integrated keyboard to mark, with 36 LEDs
highlight and name damages Working range: Ø 40 - 100 mm (mini-module)
� Picture and video transmission via WiFi, Micro-HDMI, Ø 70 - 150 mm (30 mm camera head)
Mini-USB, SD-Card Ø 100 - 300 mm (40 mm camera head)
� Livestream of picture and data via WiFi to the Cable length: 30 m version
ROCAM 4 app 65 m version
� Self-levelling and exchangeable camera heads 8 m mini-module (optional)
� Exchangeable reels for various working ranges Cable diameter: 7 mm (30 m und 65 m reel)
� New platform based battery technology 5.5 mm (mini-module)
Transmitter frequency: 33 kHz
Power supply: Li-Ion battery 18 V / 4 Ah
Main adaptor 110 - 230 V, 50 - 60 Hz
(optional)
WiFi transmitter
Simple data transmission Li-Ion battery 18 V / 4.0 Ah

to mobile devices (same as ROMAX 4000)
Long battery operation

time (up to 6 hours)
Digital metre count
Precise determination of
Removable display unit with
distance to camera head
10.4“ color-touchscreen
Full functionality, even in

10 confined spaces
Exchangeable reel system

30 m / 8 m
Large operating range from

Ø 40 mm pipe diameter
Integrated speakers
Direct audio replay

Integrated microphone
Voice recording for

Cover protected connections for SD- Locating with ROSCOPE module documentation possible
Card, Micro-Hdmi, Mini-USB ROLOC PLUS
Please note: This machine cannot be upgraded to a 65m cable.
Set (No. 1500002613) includes: ROCAM 4 Plus - 30 m cable, Ø 30 mm camera head,

guidance ball, accessory bag including location transmitter, USB-cable, pencil, RO
BC14/36 battery charger, RO BP18/4, 4.0 Ah 18V Li-Power battery
Model No.
ROCAM 4 Plus - 30 m cable, 30 mm head, EU 1500002613

2)
1)
Video inspection
ROCAM 4 Plus - 65 m SD
2) 1)
Inspection camera for pipes from Ø 40 – 300 mm with 65 m WiFi
65 m cable length, with integrated software for

documentation and large removable 10.4“ touchscreen.
Exchangeable reel system

65 m / 30 m / 8 m
Large operating range from

Ø 40 mm pipe diameter
Transport trolley with
extendible handle
over long distances
New platform based battery Transport trolley with

technology extendible handle
Set (No. 1500002615) includes: ROCAM 4 Plus - 65 m cable w/ transport trolley,

Ø 30 mm camera head, guidance ball, accessory bag including: location transmitter,
USB-cable, pencil, RO BC14/36 battery charger, RO BP18/4, 4.0 Ah 18V Li-Power battery
Model No.

10
ROCAM 4 Plus mini module

1)
Easy extension of the working range of the ROCAM 4

for pipes Ø 40 – 100 mm
Product profile
KEY FEATURES
� Professional inspection of small pipe diameters
n Easy handling due to Exchange reel system
TECHNISCHE DATEN
Camera head: Ø 25 mm, waterproof with 8 LED lights
Working range: Ø 40 - 100 mm
Cable length: 8 m / 16 m
Cable diameter: 5.5 mm
Model No.
ROCAM 4 Plus mini module, 16 m cable 1500003296
2)
1)
Video inspection
ROCAM camera heads
1)
Camera heads made of high-quality materials for

professional inspection of pipes from Ø 70 up to 300 mm
Product-profile
Excellent brightness: Mountable transmitter:
� The ROCAM camera head Ø 30 mm has over 10 ultra bright Optional 33 kHz transmitter can be used to determine
n
LED lights, that effortlessly illuminate pipes up to Ø 150 the length of the camera head (90° from Ø 70)
� The camera head can be mounted with a Ø 40 mm camera In small pipe diameters the transmitter can also be used
n
head for larger pipe diameters without the camera head to determine the course of the
Pressure tight screw slip-ring connection: pipe without a visual inspection
� Pressure tight connection (3 bar) between camera head
TECHNICAL DATA
and push cable
� High resistance to shock and impact Camera head: Ø 30 mm with 10 LED lights
� Quick and toolless exchange of the camera heads
Ø 40 mm with 36 LED lights
self-leveling and waterproof
� No burden from electrical connections
Brightness: 175 LUX (0.5 m), camera head Ø 30 mm
High flexibility and resistant: 666 LUX (0.5 m), camera head Ø 40 mm
� Flexible spring provides 90° curveablity in pipes up to Ø 70 mm
when enough stability is provided
� Pressure tight up to 3 bar with the stainless steel casing
� Scratch and impact resistant with the sapphire glass objective
Always an upright picture!
10
Pressure tight screw slip-ring

Excellent illumination connection High flexibility and durability Mountable transmitter
Model No. Model No.
Camera head Ø 30 mm 1500000123 Camera head Ø 40 mm 1500000122
1)
Video inspection
Rolling skids Guidance ball ROCAM 4 Plus
Recommended for distances from 10 m For centring of the camera head in pipes for a better
APPLICATION AREA overview and illumination
Rolling skids RS40/150 for pipe diameters Ø 150 - 200 mm APPLICATION AREA
Rolling skids RS40/200 for pipe diameters Ø 200 - 300 mm Guidance ball for pipe diameters Ø 70 - 150 mm
Guidance ball with brush attachment for pipe diameters
KEY FEATURES
Ø 70 - 200 mm
n Optimized view of the pipe section
n Less pushing resistance with the fully rubberized wheels
KEY FEATURES
n Optimized view of the pipe section through centring in the pipe
n Dirt will not accumulate in front of the lens
No. 69112 / 1500000817 No. 69111 / 1500000120

No. 69118 No. 69119
Model kg g No.
Model kg g No. For camera heads Ø 30 mm:

Guidance ball for Ø 150 mm 200 1500000120
For camera heads Ø 40 mm: Guidance ball for brush attachments 200 1500000817
Rolling skids Ø 150 mm 700 69118 For camera heads ø 40 mm:
Rolling skids Ø 200 mm 700 69119 Guidance ball for ø 200 mm 200 69111
Guidance ball for brush attachments 200 69112
Brush attachments Battery pack system CAS,

To improve the overview in pipes from Ø 100 – 200 mm mains adaptor and charger
Brush attachment Ø 100 for use in pipe Ø 100 - 150 mm n Extend the mobile operation spare battery
Brush attachment Ø 150 for use in pipe Ø 150 - 200 mm n No unintentional release of the battery, battery lock with
KEY FEATURES click mechanism 10
n External battery charger, independent charging of the
n Optimized view of the pipe section through centring in the pipe battery, higher mobility
n Dirt will not accumulate in front of the lens
n Good curveability with the brush flexibility TECHNICAL DATA
Battery: 18 V / 4.0 Ah, Li-Ionen 2)
Brush attachement spiral feather (rear) Brush attachement camera head (front)
*Use with guidance ball No. 69112 / 1500000817

Model No.
Model kg g No.
RO BP18/4, 4.0 Ah 18V Li-Power battery 1000001653
Brush attachment Ø 100* 200 69113 RO BC14/36, battery charger, 230 V, EU 1000001654
Brush attachment Ø 150* 300 69117 ROCAM 4 Plus adaptor, 230 V, EU 1000002085
2)
211
11
212
Flushing and
pipe cleaning
Flushing
Flushing compressors 216 - 218
Cleaning chemicals 218
Decalcifying
Decalcifying pumps 219
Decalcifying chemicals 220
Pipe cleaning manual
Manual pipe and drain cleaning devices 222 - 224
Pipe cleaning electric
Manual pipe and drain cleaning machines 225
Sectional drain cleaning machines 226 - 227
Drum drain cleaning machines 228 - 231
Accessories pipe cleaning electric 232 - 233
Drain cleaning spirals
Spirals 234 - 235
Drain cleaning tools
Heads and augers 236 - 240
Tool and spiral sets 241 - 242
Accessories drain cleaning spirals 243
System overview high pressure drain cleaners 244
High pressure drain cleaning
High pressure drain cleaners 244 11
213
Flushing and pipe cleaning
System overview
Flushing
ROPULS ROPULS eDM
Connection: 1” 1”
Max. pipe diameter: Ø 50 mm Ø 50 mm
Max. water pressure: 7 bar 7 bar
Documentation: – 
Page: 217 216
Pipe cleaning
WC-Blitz ROPOWER HANDY ROSPIMATIC CL ROSPI 6 H+E Plus ROSPI 8 H+E Plus
Operation mode: Manual Manual Electric Manual / electric Manual / electric
Working range: Ø 50 - 100 mm Ø 50 - 100 mm Ø 20 - 50 mm Ø 20 - 50 mm Ø 20 - 50 mm
Max. spiral length: 1m 2.3 m 7.5 m 4,5 m 7.5 m
Spiral diameter: 13 mm 16 mm 8 mm 6 mm 8 mm
Power: – – – – –
Page: 224 224 225 223 223

11
R 550 RODRUM M 13 RODRUM M 16 RODRUM L 16 R 600
Operation mode: Electric Electric Electric Electric Electric
Working range: Ø 20 - 100 mm Ø 70 - 100 mm Ø 70 - 125 mm Ø 70 - 125 mm Ø 20 - 150 mm
Max. spiral length: 40 m 30 m 45 m 45 m 60 m
Spiral diameter: 16 mm 13 mm 16 mm 16 mm 8*/ 10*/ 16 / 22 mm
Power: 440 W 620 W 620 W 620 W 690 W
Page: 226 230 230 230 226
* only usable with collet, clamping jaws or adaptor magazine (see page 232)
214
System overview
Decalcifying
ROCAL 20 ROMATIC 20
Tank volume: 15 l 15 l
Volume flow: 40 l/min 40 l/min
Delivery height: 10 m 10 m
Motor rating: 150 W 150 W
Max. temperature: 50 °C 50 °C
Flow reversal: Manual Automatic
Page: 219 219
Pipe cleaning
ROSPI 10 RODRUM S 10 Manual drain RODRUM S 13
H+E Plus cleaner 3 S
Manual / electric Electric Manual Electric
Ø 20 - 70 mm Ø 40 - 70 mm Ø 50 - 100 mm Ø 50 - 100 mm
10 m 10 m 15 m 15 m
10 mm 10 mm 13 mm 13 mm
– 440 W – 440 W
223 228 - 229 224 228 - 229

11
R 650 R 750 RODRUM L 20
Electric Electric Electric
Ø 20 - 150 mm Ø 50 - 200 mm Ø 70 - 250 mm
65 m 80 m 60 m
8*/ 10*/ 16 / 22 mm 16*/ 22 mm / 32 mm 20 mm
1,350 W 1,400 W 620 W
227 227 230
* only usable with collet, clamping jaws or adaptor magazine (see page 232)
215
Flushing
ROPULS eDM flushing compressor 1) 2)
For scouring and cleaning of heating systems and

flushing of drinking water pipes according to
DIN 1988-2 / EN 806 with protocol function
Product profile
Q One unit – three uses for safety and energy efficiency: Pipe connection: R 1“ GK-Coupling
– Flushing of floor heating systems / heating circuits Max. pipe diameter: DN 50/2“
– Flushing of drinking water pipes as per DIN 1988-2 / EN 806 Max. flow rate: 5 m3 /h
– Sanitizing of drinking water pipes
Max. water pressure: 7 bar
Q Compact dimensions and practical carriage for simple handling
Max. water temperature: 30 °C
during transport and at the building site
Protection class: IP 20
Q Two flushing speeds (impulse and permanent air flushing) for
good cleaning results Oil deposition rate: 99.9%
Q Easy to use with the clearly arranged control panel Particle retention rate: 0.3 µm compressor
Q Chemical cleaning with ROCLEAN accessories possible Max. operating pressure: 8 bar
Q Free app for easy, professional creation of flushing-protocols Engine power: 1.5 kW
as PDF files Mains connection: 230 V - 50 Hz
Dimensions (H x W x D): 630 x 380 x 340 mm
For removing deposits in floor heating

and radiators
Large LED display for flow rate amounts and
metering impulse, membrane keyboard with Clean heating systems save energy
program selection keys
Clearly arranged control panel

Pre-commission cleaning of construction
material and residues
Clean, proper hygienic pipe systems
Quick connect NW 7.2

Flushing of drinking water pipes with
For connecting pneumatic tools pulsing compressed air water mix as
per DIN 1988-2 / EN 806
Safety for plumbers and plant operators
ROPULS eDM –
11 Documentation
 Easy
 Fast
Function switch  Professional
Enables you to change to
ROCLEAN function
ROPULS eDM with ROCLEAN

ROPULS eDM App with function for cleaning and
documentation feature conservation ROCLEAN function, optional available for
ROPULS eDM and ROPULS Flushing compressor!
Scope of delivery (No. 1000001134): ROPULS eDM flushing compressor, 2 x 1 m fabric

hose 1” with GK coupling
Model kg g No.
ROPULS eDM flushing compressor with hoses 28 1000001134
1)
216 2)
Only for Android devices
Flushing
ROPULS eDM App 2)
Professional working and documentation due to eDM

(electronic Data Management)
KEY FEATURES
Report
Q can be e-mailed immediately as a PDF
Q Transfer of flushing data via Bluetooth
Q Applicable for Android and Windows devices

Q Easy, fast, professional documentation
Q Company profiles and protocols individually customizable
Q Live data transfer to handheld unit

Q Templates for various flushings-protocols available

ROPULS flushing compressor

1)
With the same range of functionality as ROPULS eDM,

but without eDM (electronic Data Management)
For removing deposits in floor heating

and radiators
Clean heating systems save energy
Pre-commission cleaning of construction

material and residues
Clean, proper hygienic pipe systems
Flushing of drinking water pipes with

pulsing compressed air water mix as
per DIN 1988-2 / EN 806
Safety for plumbers and plant operators
Function switch ROPULS with ROCLEAN function: ROPULS flushing compressor with 11
Flushing of drinking water pipes ROCLEAN function
Enables you to change to
ROCLEAN function
ROCLEAN function, optional available for

ROPULS eDM and ROPULS Flushing compressor!
Scope of delivery (No. 1000000145): ROPULS flushing compressor, 2 x 1 m fabric hose

1” with GK coupling
Model kg g No.
ROPULS flushing compressor with hoses 28 1000000145
ACCESSORIES
Model No.
ROCLEAN Injector 1000000190

Pressure regulator 2 bar 1500000203
ROPULS extension handle 1500003517
ROCLEAN cleaning and conservation on page 218
1)
C
217
2)
Only for Android devices
Flushing
ROCLEAN function
1
The pressure reducer has to be installed on the water input
side of the ROPULS flushing compressor. This maintains the
For cleaning and conserving radiator heating systems,
incoming pressure of the fresh water feed constant at 2 bar.
surface heating systems as well as for disinfection
of drinking water lines
2
The ROCLEAN injector has to be installed on the water
output side. The injector constantly and securely doses the
bottle contents to the system to be cleaned.
2 1 2
1
Model kg g No.
ROCLEAN injector 1.1 1 1000000190

Pressure regulator 2 bar 0.3 1 1500000203
Cleaning and preservation with ROCLEAN

Cleaning chemicals for Cleaning chemicals for Preservative for radiators Disinfection of drinking
radiator heating systems surface heating systems and surface heating water systems
systems
11 For cleaning incrustations and For cleaning of deposits and bio Maintains the cleaned condition Does not stay in system. One
tough deposits. Suitable for all films. Suitable for all standard and protects the system. One bottle per 100 l system volume.
standard pipe materials. Does pipe materials. Does not stay in bottle is sufficient for 100 l
not stay in system. One bottle system. One bottle per 100 l system volume.
per 100 l system volume. system volume.
Cleaning and preservation steps:
Before cleaning Model Color code

kg g No.
Step 1: ROCLEAN injector 1.1 1000000190

Mechanical cleaning Pressure regulator 2 bar 0.3 1500000203
Chemical cleaning:
Step 2:
– Radiator heating systems (6 pcs.) n 6.3 1 1500000200
Chemical cleaning
– Surface heating systems (6 pcs.) n 6.3 1 1500000201
Srep 3: Preservative (6 pcs.) n 6.3 1 1500000202
Preserving Disinfection (6 pcs.) n 6.3 1 1500000157
218
Decalcifying
ROCAL 20 / ROMATIC 20
1)
Decalcifying pump with flow direction change
Product profile
RANGE OF USE TECHNICAL DATA
For the quick decalcifying of heat exchangers, water pipes, water Connection: R 1/2”
tanks, heat and cooling systems Tank volume: 15 l
KEY FEATURES Power supply: 230 V 50 Hz
Motor rating: 150 W
Q With the help of the flow reversal (change of the direction of
Volume flow: 40 l / min.
flow) even very hard calcifications and deposits can be loosed
Delivery height: 10 m
Q Only ROMATIC: Running time of the pump and flow reversal
can be programmed, which enables comfortable operation
Q Approved for fluid temperatures up to 50 °C for especially
efficient decalcifying
Q Constant circulation of the decalcifying chemical prevents

damage that can be caused by the development of gas during
decalcification
Automatic
flow reversal!
Fig. ROMATIC 20
Fig. ROCAL 20
Decalcifying of fresh water stations and Decalcifying of heat exchangers, water

Decalcifying of drinking water storage tanks external heat exchangers heaters or drinking water pipes
Hot water
Hot water
Hot water
11
Cold water
Cold water
Cold water
Scope of delivery: ROCAL 20 (No.61100) and ROMATIC 20 (No. 61190) each contain: 2x hoses with 1/2” connection (2 m long), 2 x double nipple 1/2-3/8”,
2 x double nipple 1/2-3/4", 2 x double nipple 1/2-1/2”, 2x double socket 3/4-3/4”, 2 x reduction piece 1/2-3/4”
Model kg
g No.
ROCAL 20 6 61100
ROMATIC 20 6 61190
ACCESSORIES
Decalcifying chemical for ROCAL 20, ROMATIC 20 see 220
1)
C
Decalcifying
ROCAL Acid Multi / Plus
Decalcifying chemical for use with ROCAL 20,
ROMATIC 20
Product profile
RANGE OF USE KEY FEATURES
ROCAL Acid Multi Q ith color indication. The use of the chemical effects is shown
W
For the safe decalcification of all piping systems, by the change of the fluid color
heat exchangers, fresh water stations and water tanks Q Concentrate to mix with water
Q With corrosion protection
ROCAL Acid Plus

For strong calcifications and scale build-up. Only suitable for
technical systems. Not suitable for drinking water pipes.
No. 1500000115 No. 1500000116 No. 1500000117 No. 61105 No. 61106 No. 61110
ROCAL Acid Multi ROCAL Acid Plus ROCAL Acid Multi ROCAL Acid Plus
Copper n n Aluminium n –
Steel n n Brass n –
Stainless steel n – Plastic n –
n suitable - unsuitable n suitable - unsuitable
Model kg
g No. Model kg
g No.
ROCAL Acid Multi 5 1 1500000115 ROCAL Acid Plus 5 1 61105

11 ROCAL Acid Multi 10 1 1500000116 ROCAL Acid Plus 10 1 61106
ROCAL Acid Multi 30 1500000117 ROCAL Acid Plus 25 1500000914
Neutralizer powder
Neutralizes ROCAL Acid Plus / ROCAL Acid Multi
Product profile
RANGE OF USE
Use is necessary after ROCAL Acid Plus / ROCAL Acid Multi has
been used. The neutralizer dissolves in water. The decalcification
pump and system are flushed with this solution. The PH value in
the system and pump is neutral afterwards.
Model kg
g No.
Neutralizer powder 1 1 61115

No. 61115 No. 61120
Neutralizer powder 10 1 61120
220
Filling
ROSOLAR PUMP /
ROSOLAR PUMP PLUS
Solar filling pump
Product profile
Q A powerful centrifugal pump for rapid filling and effective Dimensions ( H × W × D ): 49 x 51 x 76 cm
flushing out and ventilation of solar plant Container volumes: 30 l
Q Optional: robust and heat resistant (up to 90 °C) Hoses: Length: 2 x 3 m
Impeller pump: Small particles of solid materials are also Connections: 3/4”
conveyed without difficulty. Fitted with a pressure relief valve Heat resistant: up to 100 °C
Q Heat resistant hoses (up to 100 °C) allow safe filling and
maintenance of solar plant
Q A height-adjustable (76 - 110 cm) telescopic grip for space-
saving storage, simple transport and good handling in tight
cellars
Q Well thought-through handling: The canister can easily be filled
through the large opening. The shut-off valve in the bottom
Height-adjustable
allows simple / uncomplicated emptying of the whole container
telescopic grip (76 - 110 cm)
Q Ball valves for safe removal of filling hoses without accidential
spill Small and flexible if required
A generously dimensioned
container opening
For easy and secure filling
Heat resistant hoses

(up to 100 °C)
Safe working – also when

servicing solar plant with
kink protection at the hose
connection
Optional: A fleece filter bag
For preservation of the internal

filter when flushing older plants
with strong pollution
Optional:
impeller pump 11
Small particles of solid
materials are also conveyed
without difficulty
A dirt filter with sight glass
Filters residues out of the medium
Return flow cover Hose connection with an-

with filter ti-kink protection Ball valve
Model No.
ROSOLAR PUMP (with centrifugal pump) 1500000135

ROSOLAR PUMP PLUS (with impeller pump) 1500000136
Fleece filter bag ROSOLAR (10 pcs.) 1500001236
Return flow cover (for filter bags) 1500001235
221
ROPUMP SUPER PLUS Quick – Compact – Handy!
Professional force pump cleaner
The optimum introduction tool for the removal of obstructions in
basins, bowls, tubs and toilets etc., using water pressure
Product profile
Q Optimal adaption to the job due to adjustable handle Q S imple handling with the perfect adaption to the drain and
Q Good force transmission with ergonomic handles easy to use with ergonomic formed components
Q Optimal sealed system and therefore high suction and
pressure power with single cast main body
Single-cast main body
Withstands the heaviest loads

Flexible, in all directions
adjustable handle
Optimal adaption to the

cleaning job
Ergonomic D-handle
P erfect transmission of
force and optimal handling
Piston with silicon sealing lip

Short and long adaptor
Effortless handling included in scope of delivery!
Adaptor short
Adaptor long Adaptor wide
No. 72072
No. 72071 No. 72073
Short adaptor Long adaptor
Model kg
g No.
ROPUMP SUPER PLUS 2.00 072070X

with 2 adaptors (long, short)
11 ROPUMP SUPER PLUS 3.30 1000001762
3 adaptors (long, short, wide) and toolbag
Adaptor long 0.66 72071
Adaptor short 0.16 72072
Adaptor wide 0.40 72073
ROPUMP Dissolves obstructions in drains, basins, showers, bathtubs etc.
Force pump cleaner according to the air-

pump principle with water pressure Product profile
KEY FEATURES
n Small and handy
n Compact and effective
Flexible socket
Model kg g No.
Various areas of application
ROPUMP with flexible socket 500 71991
222
ROSPI H+E PLUS
Professional manual and electrical drain cleaning unit
Clean and comfortable removal of obstructions in kitchen, bath,
toilets or drainage openings with drain cleaning spiral
Product profile
Q Removal of sinks and siphon filters is not necessary Working range: 20 - 50 mm
Q Switch from manual to electrical use within seconds Spiral: Ø 8 mm x 7.5 m
Q Secure hold even at higher speeds during drill operation
Q Impact-resistant and protected from dirt contamination
Q Hexagonal drive for conventional power drills
Closed plastic spiral container
Clean use and sturdy construction
Hexagonal bolt
F or conventional
Ergonomic handle power drills
with soft grip inlay
Safe grip and operation

even at high speed
piral lock with flexible spiral and

S
incorporated bulb head auger
Removes dirt in
hard-to-reach spaces
Knurled screw, change without tools
Switch from manual to electrical use

within seconds
Electrical operation with cordless drill Manual operation
11
Model kg g No.
ROSPI 6 H+E Plus 4.5 m 1.4 1 72090

ROSPI 8 H+E Plus 7.5 m 3.5 1 72095
ROSPI 10 H+E Plus 10.0 m 4.8 1 72005
For spare spirals see 245
223
ROPOWER HANDY WC-BLITZ RO-3 toilet auger
Manual drain cleaning unit, Ø 50 - 100 mm KEY FEATURES
A universal manual drain cleaning unit for fast clearance of
obstructions. The spiral permits the attachment of a wide range
Q Flexible use even in hard-to-reach places
of ROTHENBERGER pipe cleaning tools with 16 mm couplings With tough cleaning bulb auger. Extendable handle and 1 m
spiral length, Ø 1/2”
KEY FEATURES Q No damage to ceramic surfaces
Q Additional spiral cleaning effects with the use of Angle made out of plastic
a square spiral Angle with plastic protection
No damage to ceramic surfaces in the

visual range
Ergonomic handle
with soft grip inlet
Reliable and safe

use, firm grip T-groove coupling at
No. 1500001324
Set (No. 71973) includes: ROPOWER PROFILE spiral 2.3 m without core (No. 72494),
manual crank (No. 71976), safety gloves (No. H81401), separating pin (No. 72100), Universal bulb auger
blade cutter Ø 25 mm (No. 72169)
High mobility in bends
Model kg
g No.
ROPOWER HANDY complete 1.7 71975 Model No.

kg g
ACCESSORIES
Manual crank 0.4 71976 WC-Blitz RO-3 complete with spiral 2.75 78551
ROPOWER PROFILE CABLE w/o plastic core 1.2 72494 WC-Blitz RO-3 with tool coupling 2.90 1500001324
Manual drain cleaner type 3 S

For pipes Ø 40 - 100 mm
Spirals Ø 13 mm x 15 m with 16 mm coupling
KEY FEATURES
Q F lexible use with a wide range of applications
For use with all ROTHENBERGER drain cleaning tools
with 16 mm couplings
Q Cleaning unit with stand
Secure use
Q Plastic spiral drum
Corrosion-proof and impact-resistant
11
Set includes (No. 72003): manual drain cleaner type 3 S (No. 72003),
spirals Ø 13 mm x 15 m (No. 72016), cross-blade cutter Ø 35 mm (No. 72176)
and separating pin (No. 72100)
Model kg
g No.
Manual drain cleaner type 3 S, complete 17.50 72003

Spare spiral Ø 13 mm x 15 m 7.00 72016
Cross-blade cutter Ø 35 mm 0.04 72176
Separating pin 0.01 72100
Further Ø 16 mm tools can be found on 238
224
ROSPIMATIC CL 1)
Professional drain cleaning unit up to Ø 50 mm

Effective removal of obstructions in access lines with a one-of-a-kind
spiral forward and reverse system without changing the rotational
direction.
Product profile
Switch
Q between forward and reverse under full load without Application range: 20 - 50 mm
the need to change the motor rotational direction Spiral with inner-core and
Q Unit can be used with any professional cordless drill driver

Bulb auger: Ø 8 mm x 7.5 m
Q Soft stop technology for smooth run out prevents hits to

Dimensions (without spiral): 420 x 200 x 200 mm
user‘s wrist
Q The spiral drive can be combined with 3 different cleaning

tools for more efficient operation (optional)
Q Optional guide hose prevents pollution of the working place
Compact design without power unit
Little required space

Hexagonal take-up
for battery drill
Dual use for customer's

own drill
Locking knob with torque limit e

vers
d re
No squeezing of the spiral ard an
Forw
Patented feeding mechanism

Free-wheel clutch for
Switching between forward and hexagonal take-up
reverse without stopping the machine
Soft roll-out of the machine
without hit to user's wrist.
With coupling for

With bulb-auger various tools With flexible guide hose 11
Easy connection to professional cordless drill driver
Set (No. 1000002299) includes: ROSPIMATIC CL set incl. spiral 8 mm x 7.5 m with bulb
head (No. 72413), spiral 8 mm x 7.5 m with coupling (No. 72425), cross-blade auger
(No. 72765) and separating key (No. 72102)
Set (No. 72942) includes: blade cutter (No. 72764), cross-blade cutter (No. 72765),
ball head cutter (No. 72766), separating pin (No. 72102)
Model No.
ROSPIMATIC CL basic unit incl. 8 mm / 7,5 m spiral 1000002298

ROSPIMATIC CL set, w. 2nd spiral + cross-blade auger 1000002299
Spiral 8 mm x 7,5 m, w. bulb auger and steel core 72413
Spiral 8 mm x 7,5 m, with coupling and core 72425
Tool set 8 mm (4 pcs.) 72942
Protection hose f. ROSPIMATIC CL 72542 For additional accessories see 234
1)
C
1)
R 550
Drain cleaning machine for pipe Ø 20 - 100 mm
Reliable, high-performance drain cleaning machine with a variety of
general purpose maintenance uses
Product profile
APPLICATION AREA
Especially light, compact and handy design: Ideal for the universal
service use by pipe obstructions in connecting pipes from wash
basins, toilets, sewage pipes, floor drains and roof drainage
KEY FEATURES
Q
Extremely light
Q Direct attachment of 16 mm spirals
Q Maximum working length 40 m, with Ø 16 mm S-spiral
TECHNICAL DATA
For pipe diameters: Ø 20 - 100 mm
Direct attachment: Ø 16 mm spirals
Max. working length: 40 m with Ø 16 mm S-spirals
Rating: 440 W (power input)
Voltage: 230 / 110 / 115 V, 50 Hz
Speed: 583 rpm, RH and LH drive
Weight: 16.0 kg
Model kg g 230 V
R 550 w/ guide hose 16.0 72686

Tool sets and accessories starting on 232
R 600
1)

For installation and maintenance work in hospitals and
municipal facilities
Product profile
APPLICATION AREA
Universal use both indoors and outdoors: The powerful motor
works reliably even against stubborn obstructions. A wide range
of accessories is available
11 KEY FEATURES
Q irect up take of 16 mm and 22 mm spirals
D
Q Optional Ø 8 and 10 mm with adaptor magazine possible
Q Maximum working length 50 m, with Ø 16 mm S-spirals
TECHNICAL DATA
With direct attachment: Ø 22 and 16 mm spirals
With adaptor magazine: Ø 8 and 10 mm
50 m with Ø 16 mm S-spirals
10 m with Ø 8 and 10 mm spirals
Rating: 690 W (power input)
Voltage: 230 / 110 / 115 V, 50 Hz
Model Weight: 20.9 kg
kg g 230 V
R 600 w/ guide hose 20.9 72687

1)
R 650
1)

For professional mobile drain cleaning. Compact, robust and
powerful, even by the toughest pipe obstructions
Product profile
APPLICATION AREA
Perfectly suited for rough use and in extreme working conditions:
Quiet operation and powerful cleaning action, even when cutting Drive lever can be
through roots or grinding out cement and lime deposits fitted on the side
KEY FEATURES Flexible use
Q ouble motor performance (cp. R 600)

D
Q Flexible with drive lever that can be fitted on the side
Q Direct up take of 22 mm and 16 mm spirals
Q Optional Ø 8 and 10 mm with adaptor magazine possible
Q Maximum working length 65 m, with Ø 22 mm S-spiral
TECHNICAL DATA
Direct attachment: Ø 22 and 16 mm spirals
With adaptor magazine: Ø 8 mm and 10 mm
10 m with Ø 8 and 10 mm spirals
Rating: 1,350 W (power input)
Voltage: 230 V, 50 Hz
Weight: 22.8 kg Model
kg g 230 V
R 650 w/ guide hose 22.8 72688

R 750
1)

For professional mobile drain cleaning. Compact, robust and
powerful, even by the toughest pipe obstructions
Product profile
APPLICATION AREA
Perfectly suited for the cleaning of domestic connections and
main pipes: Quiet operation and powerful cleaning action.
Usable for such as chain spinning, grinding and cutting roots
KEY FEATURES
11
Q rive lever can be rotated (180°), locked and used as a handle
D
for easy wheeling
Q Direct up take of 32 mm and 22 mm
Q Optional Ø 16 mm with clutch jaw possible
TECHNICAL DATA
With direct attachment: Ø 32 and 22 mm spirals
With clutch jaw: Ø 16 mm Full rubber transport wheels
Max. working length: 80 m with Ø 32 mm S-spirals Comfortable transport, high
70 m with Ø 22 mm S-spirals mobility and a secure stand
Rating: 1,400 W (power input)
Model
kg g 230 V
Voltage: 230 V, 50 Hz
Speed: 467 rpm, RH and LH drive R 750 w/ guide hose 33.5 72689
Weight: 33.5 kg Tool sets and accessories starting on 232
1)
C
RODRUM S
Drum drain cleaning machine with automatic spiral
feed. For pipes from Ø 40 - 100 mm. Perfectly suited
for use in public and commercial buildings.
Product profile

n Clean and discreet use F lexible
Q use:
n E
asy handling due to automatic spiral feeding and retrieving Drum interchangeable for different pipe diameters
n N
ew feeding unit for direct pressure relief by release of the n Easy to use:

feeding handle Feeding and pressure relief with single handle

n M
achine works with Ø 10 and Ø 13 mm spirals
n Clean:
Spiral in detachable drum
Interchangeable drum
Fast change between Ø 10 mm and

Ø 13 mm spirals, easy to carry
Spiral protection
Fast tension relief from the

spiral to prevent damage
just by releasing the lever
Cleanout slots and drain plug
Easy and fast cleaning of the drum
11
Rubber feet 2-in-1 feeding unit

No damage to the floor Suitable for Ø 10 mm and
Ø 13 mm spirals
228
1)

Q ompact construction: Ideal for service deployment to unblock
C Working range/pipe diameter: Ø 40 - 100 mm
pipes in connecting pipes of wash basins, toilets, drainage Max. working length: 10 m (with 10 mm Spirals)
pipes, floor drainage 15 m (with 13 mm Spirals)
Q On retraction the dirty spiral moves back into the spiral drum.
Power (input): 440 W
Due to its clean and discrete operation, the machine is best Speed (drum): 300 rpm
suited for SHK-companies and their services in private houses,
Product dimensions: 58 x 33 x 39 cm
hospitals and clinics, gastronomy and hotels, Facility Manage-
ment and public buildings
Cleaning of floor drain with 13 mm spiral
Convenient transport thanks to detachable drum Interchangable drum for different working ranges
11
Set (No. 1000001256) includes: RODRUM S 10, guide hose (No.1300002581), spiral
guide gloves (No.1500000439)
230 V Set (No. 1000001257) includes: RODRUM S 13, spiral guide gloves (No.1500000439),
Model kg g 50 Hz chain spinning head (No. 072185F), cross blade cutter (No.72176), forked cutter
(No.72164), bulb auger (No. 72163), retrieving auger (No. 72162), straight auger
RODRUM S 10 EU 18.9 1000001256 (No. 72161), seperating pin (No.72100), guide hose (No.1300002581), ROCASE (No.
1300003334) with inlay (No. 1300003372)
RODRUM S 13 EU with tool kit 25.7 1000001257
Set (No. 1000001308) includes: chain spinning head (No. 072185F), cross blade cutter
Spiral 13 mm x 15 m with reinforced wire 72016 (No.72176), forked cutter (No.72164), bulb auger (No. 72163), retrieving auger (No.
72162), straight auger (No. 72161), seperating pin (No.72100), ROCASE
(No. 1300003334) with inlay (No. 1300003372)
ACCESSORIES
Model No.
kg g
RODRUM S 10 Drum 5.5 1000001275

RODRUM S 13 Drum 11.4 1000001276
Tool kit 16 mm 5.5 1000001308
Spirals, Drain cleaning tools 236
1)
C
RODRUM M and L
1)
Drum drain cleaning machine with automatic spiral feed.

For pipes from Ø 70 - 250 mm. Perfectly suited for use
in public and commercial buildings as well as house
connection pipes.
Product profile
KEY FEATURES RANGE OF USE
Q Interchangeable drums for quick and easy adaption to different Q ODRUM M and L is a drum drain cleaning machine with
R
pipe diameters without use of any tool automatic spiral feed for removal of blockages in pipes from
Q Clean and discreet use Ø 70-250 mm.
Q Easy handling due to automatic spiral feeding and retrieving Q Due to the interchangeable drums the machine can be adapted
Q Spiral protection due to direct pressure relief by release of to different pipe diameters quickly without usage of any tools
the lever Q The dirty spiral runs back into the drum and keeps the
Q Machine works with 13, 16, 20 mm spirals surrounding free of dirt
Q The clean and discrete way of working is ideal for Plumbers,
facility managers, drain cleaners for jobs in private housholds,
as well as public buildings like hotels or restaurants
Loading device
TECHNICAL DATA
Ergonomic loading of the machine
Working range /pipe diameter: Ø 70 - 250 mm
Max. working range: 30 m (with 13-mm-Spirals)
45 m (with 16-mm-Spirals)
60 m (with 20-mm-Spirals)
Power (input): 620 W
Speed (drum): 270 r/ min.
Product dimensions: 77 x 56 x 87 cm
Interchangeable drum
Fast change between

Ø 13, 16, 20 mm spirals
Cleaning slots
Spiral protection
Easy and fast cleaning
Fast tension relief from the of the drum
spiral to prevent damage just
11 by releasing the lever
3-in-1 feeding unit
No retrofitting neccessary
for different spiral diameters
Interchangeable drums for adaption of the

working range
Rubber feed
No damage of the floor
230 V
Model kg g 50 Hz
RODRUM M 13 spirals 13 mm x 15 m, incl. 16 mm tool kit 45.5 1000001711

RODRUM M 16 spirals 16 mm x 15 m, incl. 16 mm tool kit 50.2 1000001712
RODRUM L 16 spirals 16 mm x 15 m, incl. 16 mm tool kit 51.9 1000001713
RODRUM L 20 spirals 20 mm x 20 m, incl. 20 mm tool kit 68.0 1000001714
1)
RODRUM M and L drums
Interchangeable spiral drums for quick and easy
adaption of the machine to different pipe
diameters or for extension of the spiral length.
No. 1000001730 No. 1000001728
Model kg g No.
RODRUM drum M 13 incl. spiral 13 mm x 15 m 14.5 1000001727

RODRUM drum M 16 incl. spiral 16 mm x 15 m 19.0 1000001728
RODRUM drum L 16 incl. 2 x spirals 16 mm x 15 m 38.7 1000001729
RODRUM drum L 20 incl. spiral 20 mm x 20 m 36.8 1000001730
ACCESSORIES
Model No. Model No.

kg g kg g
Straight auger, 20 mm* 0.32 1500002253 Forked cutter 80, 20 mm* 0.15 1500002263
Funnel auger, 20 mm* 0.55 1500002254 Forked cutter 100, 20 mm* 0.20 1500002264
Bulb auger, 20 mm* 0.40 1500002255 Two-way root cutter 65, 20 mm* 0.39 1500002265
Retrieving auger, 20 mm* 0.12 1500002256 Two-way root cutter 90, 20 mm* 0.46 1500002266
Peak-head auger, 20 mm* 0.40 1500002257 Adaptor, square-coupling to 22 mm T-coupling 0.25 1500002267
Cross-blade cutter 50, 20 mm* 0.16 1500002258 Spiral 13x15 with inner core 10.8 1500002271
Cross-blade cutter 65, 20 mm* 0.23 1500002259 Spiral 16x15 with inner core 15.5 72918
Cross-blade cutter 90, 20 mm* 0.39 1500002260 Spiral 20 mm x 20 m w. inner core and
Chain-spinning head, 4 chains, 20 mm* 0.30 1500002261 square coupling 33.5 1500002268
Forked cutter 60, 20 mm* 0.10 1500002262 RODRUM tool kit 16 mm 1000001731
* all 20 mm augers with square coupling RODRUM tool kit 20 mm 1000001732
No. 1500002267 No. 1500002254 No. 1500002261 No. 1500002257 No. 1500002253
No. 1500002266 No. 1500002255 No. 1500002258 No. 1500002256 No. 1500002263
Set (No. 1000001731) includes: ROCASE

(No. 1300003334) with inlay (No. 1300003372),
chain-spinning head (No. 072185F), cross-blade
cutter (No. 72176), forked cutter (No. 72164), bulb
auger (No. 72163), retrieving auger (No. 72162), 11
straight auger (No. 72161), separating key
(No. 72100)
Set (No. 1000001732) includes: ROCASE

(No. 1300003334) with inlay (No. 1300003372),
bulb auger (No. 1500002255), cross-blade cutter
(No. 1500002259), forked cutter (No. 1500002263),
separating key (No. 72101)
No. 1000001731 No. 1000001732
Loading device Easy transport due to stair capable chassis Cleaning of a down pipe with 16 mm spiral
231
Accessories pipe cleaning electric
Clutch jaws
For machine type For spirals-Ø kg g No.
R 550
(from serial No. 411542) 16 mm 0.1 72538
(up to serial No. 411541) 16 mm 0.1 72536
No. 72538 No. 72536
R 600/650
(from serial No. 409001) 16 and 22 mm 0.3 72638
(up to serial No. 409000) 16 and 22 mm 0.3 72666
R 750 22 and 32 mm 0.4 72563
R 80/100 SP/R140 B 22 mm 0.4 72561
R 80/100 SP 32 mm 0.3 72562
No. 72638 No. 72666 No. 72563
Adaptor magazines
Q Clean, safe storage of 8 and 10 mm spirals
Q Impact-resistant container with clutch jaws and precision clutch
For machine type For spiral-Ø max. Spiral length kg g No.
R 600/650 8 mm 10 m 1.8 72514

No. 72514, No. 72515
R 600/650 10 mm 10 m 1.8 72515
Clutch jaw for R 750

For machine type For spirals-Ø kg g No.
R 750 16 mm 0.3 72915
Ensures safe, kink-free spiral feed Spiral guide hoses

Q Prevents contamination and damage
for for
Model machine type spiral-Ø Length kg g No.
11
FS 16 R 550 / RODRUM S 16 mm 2m 1.1 72540
FS 22 R 600 / 650 22 mm 4m 2.8 72541
No. 72541 No. 72559 FS 32 R 750 / 80 / 100 SP 32 mm 4m 4.1 72559
With precision quick coupling
Tripod stand
Ideal working height
Q Collapsible and galvanised
Q P
rovides an ideal working height of the drain cleaning machine,
for example: inspection holes in downpipes
Q Spiral retrieving device
For machine type kg g No.
R 550 - R 600 - R 650 - R 750 3.0 58182
232
Accessories pipe cleaning electric
Spiral retrieving device
Q Safe feeding / retrieving of spirals in downpipes
Q Suitable for all Ø 22 and 32 mm open-wound spirals
Q Suitable as pusher unit for difficult obstructions
Q Also suitable as adaptor for third-party equipment without problems
Q With water supply connection (two 1” threaded couplings)
Q Socket for tripod stand
Model kg g No.
Spiral retrieving device 3.7 72135
Telescoping guide tubes

Q No twisting: For safe spiral guidance in manholes and manhole covers
Model Extended length m Type kg g No.
For spirals Ø 16, 22 mm 1.4 - 2.3 2 pcs. 3.0 72130
ROWONAL care and rust remover Spiral guide gloves

Q For cleaning, preservation and protection of spirals, couplings Q F
or safe grasping and guiding of cleaning spirals
and tools
Q For cleaning, rust-removal Guide gloves, leather:
Q Full leather with short cuff
Q R
obust and comfortable, inner glove surface studded
Q O
nly to be used with hygiene glove
No. 72120 / 72121
No. 72142 No. 1500000439
Model kg g No.
Guide gloves left, leather 190 72120
Spray can 0.2 l 220 72142 Guide gloves right, leather 190 72121
Plastic canister 5.0 l 5,100 72140 Guide gloves (pair), rubber 160 1500000439
11
Separating pin
Q For disconnecting spirals and spiral tools
No. 72100
Model kg g No.
For spirals / tools with Ø 16 mm 20 72100

For spirals / tools with Ø 22 and 32 mm 30 72101 No. 72101
For spirals / tools with Ø 8 mm 15 72102
Spiral baskets
Q Safe storage combined with convenient transport
Q Perfectly suited for cleaning and preservation
Model Spiral length max. kg g No.
For spirals / tools w/ Ø 16 mm 34.5 m 1.3 72110

For spirals / tools w/ Ø 22 mm 22.5 m 1.6 72112
For spirals / tools w/ Ø 22, 32 mm 22.5 m 2.3 72111 No. 72110 No. 72111 No. 72112
233
Pipe cleaning spirals
ROTHENBERGER high-performance
drain cleaning spirals
For the toughest demands during continuous operation
Product profile
Q Bevelled lead-ins on the T-groove coupling Manufactured from quality spring steel, type C DIN EN 10270-1
Q Quick, trouble-free coupling even when wearing gloves Material No. 1.1200
Q For the toughest demands even during continuous operation Specially hardened and tempered
Different wire gauge can be chosen depending on use, high Safety T-groove coupling system with NIROSTA- pressure pin
material characteristics, perfected production process locking mechanism
Q Maximum spring tension with high elasticity and flexibility Spring mounted NIROSTA pressure pin with NIROSTA spring
Specially hardening process
Q Optimum high torque transmission
Tightly wound spiral with short pitch
Q Increased spiral tension when machine turns clockwise
and depending on the resistance of the obstruction
Professional left-handed wound spiral With lockring
Sufficient connecting coil ROPOWER profile cable
Spare couplings can be mounted easily Additional cleaning effect with the squared profile
Plastic core
Various wire gauges
Spiral won‘t clog with dirt
Flexible, depending on use
Insertion taper T-groove made of Nirosta steel
11 Simple coupling of spirals and tools Long lasting and high functional
safety with the high-quality
coupling design
Spiral / Short distance Long distance No clogging of the Additional

type many bends straight run spiral with dirt cleaning power
Standard spiral    
SMK-spiral    
S-spiral    
S-SMK-spiral    
ROPOWER profile    
 not suitable  suitable
234
Pipe cleaning spirals
ROPOWER profile cable ROTHENBERGER lockring
Spiral with special galvanized wire shape One-of-a-kind safety ring for the optimum transmission
of the torque pressure onto the coupling with 100%
KEY FEATURES
surface pressure
Q S quared spiral wire profile (DIN EN 10270-1)
Additional cleaning effect on pipe wall KEY FEATURES
Q Plastic core Q Self locking connection of spiral and coupling:
No clogging of the spiral with dirt With increased stress on the spiral, the torque pressure on the
Q Especially suitable for working over long distances spiral end is increased and is transferred with 100% surface
coverage onto the coupling.
Q Safety ring made out of flexible and self-binding material:
With increased stress the ring will not slide, rather because of the
100% surface pressure, it adjusts itself to positively lock onto the
coupling
Q Optimum force transmission for professional pipe cleaning
Q Increased safety
Q Increased durability / service life of the spiral
Profile edge
50% more cleaning power

when used with the spiral tools
mm Core Inch m kg g No.
16  5/8” 2.3 1.3 72490

Safety T-groove couplings can be found on 243
Standard spirals SMK-spirals

Q F
lexible spiral, for cleaning jobs with short distances with a Q F
lexible spiral, for cleaning jobs with short distances with a
succession of pipe bends succession of pipe bends
Q A
dditional protection of the spiral from clogging with the
plastic core
Wire thickness R/K Wire thickness R/K

mm Inch m Ø mm Type kg g No. mm Inch m Ø mm Type kg g No.
16 5/8” 2.3 3.0 C8 1.05 72431 16 5/8” 2.3 3.0 C8 1.24 72433
22 7/8” 4.5 4.5 C 10 3.98 72441 22 7/8” 4.5 4.5 C 10 4.64 72442
32 1.1/4” 4.5 5.0 C 11 6.29 72451 32 1.1/4” 4.5 5.0 C 11 7.63 72452
Safety T-groove couplings can be found on 243 Safety T-groove couplings can be found on 243
11
S-spirals S-SMK-spirals
Q ery stable spiral with increased wire diameter for long distances
V Q ery stable spiral with increased wire diameter for long distances
V
and less bends and less bends
Q H
igh rigidity, suitable for demanding work, such as root cutting, Q High rigidity, suitable for demanding work, such as root cutting,
milling milling
Q A
dditional protection of the spiral from clogging with the
plastic core
Wire thickness R/K Wire thickness R/K

mm Inch m Ø mm Type kg g No. mm Inch m Ø mm Type kg g No.
16 5/8” 2.3 3.5 E8 3.00 72428 16 5/8” 2.3 3.5 E8 1.30 72435
22 7/8” 4.5 5.0 E 10 4.18 72443 22 7/8” 4.5 5.0 E 10 4.78 72444
32 1.1/4” 4.5 6.0 E 11 6.80 72453 32 1.1/4” 4.5 6.0 E 11 7.85 72455
Safety T-groove couplings can be found on 243 Safety T-groove couplings can be found on 243
235
Flushing and pipe cleaning With lockring
Examples of use Bulb auger 237
Tool expertise from ROTHENBERGER

The most common tool for
Application areas for ROTHENBERGER high-performance drain cleaning pipes and drains with tight
cleaning tools with T-groove secure couplings or multiple bends
Suitable for all ROTHENBERGER drain cleaning spirals with
Q Ø 16 mm - 5/8”
Q Ø 22 mm - 7/8”
Q Ø 32 mm - 1.1/4”
See the following pages for more information on professional tools
in various versions and dimensions for loosening obstructions and
cleaning drains
Retrieving auger 237

Cross-blade cutter, serrated 238
Special tool for retrieving objects Special tool for opening up

from the pipe, e.g. textiles, solidified pipe obstructions
spirals or tools
Funnel auger 237 Chain-spinning head with spikes 239
Tool for removing, opening or For concrete, cast iron and

retrieving obstructions caused by, ceramic pipes. Intensive action.
e.g. textiles Without rings = for tight pipe
bends, with 3 chains
Spade head cutter 238 Carbide-tipped cutters 240
Ideally suited for slit or sludge depo- This carbide-tipped tool is used to
sits in pipes, and as a remove the hardest obstructions
follow-up tool such as cement, urine and water
11 scale etc.
Spiral sawtooth cutter 238

Two-way root cutter 240
Special tool for chopping up small Special tool for cutting roots in both
roots and other material that directions. Also suitable for solid
have become caught in the pipe materials
236
With lockring Flushing and pipe cleaning
Bulb auger, long Bulb Auger, short
Q ith the longer, more flexible range the bulb auger is considerably
W Q Suitable for tight pipe bends
more flexible in curves. Pipe from Ø 40 mm Q Standard, highly flexible tool for clearing light textile and
paper obstructions
Coupling Working range

Coupling Working range mm / Inch mm mm mm kg g No.
mm / Inch mm mm mm kg g No.
16 / 5/8” 28 115 40 - 75 70 72163
16 / 5/8” 28 500 40 - 75 220 72158 22 / 7/8” 40 180 75 - 100 220 72263
22 / 7/8” 40 500 50 - 100 464 72208 32 / 1.1/4” 50 220 75 - 250 490 72363
Straight auger Retrieving auger

Q Standard tool for investigating the nature of an obstruction Q S
pecial tool designed with a claw for retrieving textiles, tools,
Q F
or piercing or drilling through obstructions caused by textiles, spirals etc.
paper, cellulose materials, kitchen refuse etc.
Q For removing samples to determine a suitable clearing tool
Coupling Working range Coupling Working range

mm / Inch mm mm mm kg g No. mm / Inch mm mm mm kg g No.
16 / 5/8” 16 110 40 - 75 60 72161 16 / 5/8” 35 55 50 - 75 35 72162

22 / 7/8” 22 210 75 - 100 170 72221 22 / 7/8” 45 100 75 - 150 110 72203
32 / 1.1/4” 32 220 100 - 250 350 72321 32 / 1.1/4” 65 125 75 - 250 240 72325
Funnel auger Drop-head auger 11

Q F or removing or opening up obstructions caused by textiles Q Ideal for particularly tight pipe bends, branches and small-diameter
or paper drain downpipes
Q Large grasping ability can also be used to retrieve spirals
from drains

mm / Inch mm mm mm kg g No. Coupling Working range
16 / 5/8” 32 110 50 - 100 80 72165
22 / 7/8” 55 185 110 - 150 280 72222 16 / 5/8” 24 83 50 - 75 60 72159
32 / 1.1/4” 60 195 100 - 250 500 72322 22 / 7/8” 37 125 60 - 100 180 72264
237
Hardened spring steel blades! Four-blade cutter
Q For cutting through and removing tough obstructions
Q For the removal of sludge deposits
Q Ideal with S-spirals

16 / 5/8” 40 40 50 - 75 30 72154
16 / 5/8” 30 40 50 - 75 20 72164
No. 72154 No. 72164
Grease cutter

16 / 5/8” 25 35 40 - 75 30 72169
Q S
tandard tool for removing 16 / 5/8” 35 45 50 - 75 40 72170
grease and other soft deposits, 16 / 5/8” 45 56 60 - 100 50 72171
No. 72234
e.g. soap accumulations 22 / 7/8” 45 60 60 - 125 80 72234
Spade head cutter

Q Curved special tool for silt and sludge deposits

22 / 7/8” 65 65 100 - 150 150 72261

No. 72261
32 / 1.1/4” 65 70 100 - 150 250 72360
Spiral sawtooth cutter

Q S pecial tool for chopping up small roots, branches and
other materials
Q Not suitable for plastic pipes!

16 / 5/8” 35 25 50 - 75 40 72166
22 / 7/8” 45 40 75 - 100 100 72229
No. 72229 32 / 1.1/4” 65 55 75 - 100 210 72329
11
n Used for textile or sludge obstructions! Cross-blade cutter, serrated

n Hardened, break-proof, spring steel blades! Q Powerful combination tool for grinding up and removing
n Recommended
solidified obstructions
for use with S or SMK-spirals! n For coarse removal of incrustations
n As preparatory tool for chain spinning

16 / 5/8” 25 35 50 - 75 30 72175
16 / 5/8” 35 45 50 - 75 40 72176
16 / 5/8” 45 56 75 - 100 65 72177
16 / 5/8” 55 60 100 - 125 80 72178
22 / 7/8” 45 60 100 - 125 90 72275
22 / 7/8” 65 60 100 - 150 190 72276
No. 72275
22 / 7/8” 75 80 100 - 150 220 72277
32 / 1.1/4” 65 70 100 - 150 260 72375
32 / 1.1/4” 90 100 125 - 200 490 72376
32 / 1.1/4” 115 120 150 - 250 640 72377
238
Chain-spinning heads
Without ring, with smooth chain
KEY FEATURES
Q For cleaning greasy and incrusted pipes
Q S
urface-preserving cleaning or ceramic and plastic pipes
Q Without ring: improved manoeuvrability in bends
No. 72284
Chain-spinning heads without ring and without spikes Improved

mobility!
Without ring, with 2 chains

16 / 5/8” 30 105 50 - 125 120 072185F
16 / 5/8” 30 155 100 - 125 160 72185
22 / 7/8” 50 170 100 - 150 530 72284
16 / 5/8” 40 155 60 - 125 270 72187
22 / 7/8” 60 170 80 - 130 710 72289 No. 72289
Chain-spinning heads with spikes

KEY FEATURES Ideal for final cleaning!
Q Intensive cleaning action
Q Ideal for concrete and cast iron pipes
Q Reduces the risk of renewed obstructions
Q Perfectly suitable for down pipes
Q With ring:

for better centering in horizontal pipe runs
Q Without ring:

Improved mobility in bends
Better alignment in
horizontal pipe position!
No. 72286
Chain-spinning heads with ring and spikes 11

22 / 7/8” 65 170 100 - 125 1,060 72285

22 / 7/8” 75 170 100 - 150 1,110 72286
32 / 1.1/4” 75 220 100 - 125 1,700 72341
No. 72278
Without ring, with 2 or 4 chains and spikes For better curve

manoeuvrability!

16 / 5/8” 30 155 50 - 125 160 72186
22 / 7/8” 50 170 100 - 150 860 72278
16 / 5/8” 40 155 75 - 125 280 72188
22 / 7/8” 60 170 100 - 150 880 72299
32 / 1.1/4” 80 220 100 - 200 1,460 72348 No. 72188
239
Carbide-tipped cutters Serrated forked cutter
Q arbide-tipped cutters for the hardest obstructions and
C Q Particularly suitable for sludge deposits and roots
incrustations such as cement deposits, urine and water scale and Q Hardened spring steel cutter with teeth on both sides,
other hard deposits long service life
Q Recommended for use with S- or SMK-spirals
Carbide-tipped cutters!
No. 72250
No. 72251

Coupling Working range mm / Inch mm mm mm kg g No.
mm / Inch mm Form mm kg g No.
22 / 7/8” 76 100 100 - 150 230 72250
16 / 5/8” 30 straight 50 - 75 80 72193 22 / 7/8” 100 100 125 - 150 72251
22 / 7/8” 45 pointed 60 - 100 320 72295 32 / 1.1/4” 76 100 120 - 200 260 72350
32 / 1.1/4” 80 straight 100 - 200 530 72398 32 / 1.1/4” 100 100 125 - 200 72351
Two-way root cutter Ball head cutter

Q ith hardened spring steel cutter for chopping up roots in
W Q P erfectly suited for use in pipes with hard incrustations such as
both directions lime, urine scale etc.
Q Recommended for use with S- or SMK-spirals Q Suitable for downpipes, its round shape ensures excellent curve
Q Not suitable for use with plastic pipes mobility even at 90°
Replaceable blades!
11
No. 72326 No. 72227
No. 72266

No. 72265 mm / Inch mm mmkg g No.
4 Blades
16 / 5/8” 50 - 75 25 42 72168
16 / 5/8” 50 - 75 35 80 72172
22 / 7/8” 100 - 125 55 198 72223
22 / 7/8” 100 - 150 75 438 72224
22 / 7/8” 100 - 150 95 634 72226
Coupling Working range 32 / 1.1/4” 100 - 125 55 228 72324
mm / Inch mm mm mm kg g No. 32 / 1.1/4” 100 - 150 75 468 72326
8 Blades
22 / 7/8” 65 80 100 - 125 250 72265 22 / 7/8” 125 - 150 90 1,025 72227
22 / 7/8” 90 85 125 - 200 290 72266 22 / 7/8” 125 - 150 115 1,225 72228
32 / 1.1/4” 65 80 100 - 125 290 72365 32 / 1.1/4” 125 - 200 95 1,108 72327
32 / 1.1/4” 90 90 125 - 200 330 72366 32 / 1.1/4” 150 - 200 115 1,256 72328
240
With lockring Flushing and pipe cleaning
Tool set L Tool set S
Ø 16 mm, 10 pieces Ø 16 mm, 5 pieces
Set (No. 72936) includes: ROCASE (No. 1300003334) with inlay (No. 1300003372),
separating key 16 mm (No. 72100), retrieving auger 16 mm (No. 72162), bulb auger
16 mm (No. 72163), serrated forked cutter 16 mm (No. 72164), blade cutter 16/25 mm
(No. 72169), cross-blade cutter 16/45 mm (No. 72177), chain-spinning head 16 mm Set (No. 72937) includes: separating pin 16 mm (No. 72100), straight auger 16 mm
with 2 smooth chains (No. 72185), guide gloves, left/right (No. 1500000439), (No. 72161), bulb auger 16 mm (No. 72163), blade cutter 16 mm (No. 72169), cross-
ROWONAL spiral spray (No. 72142) blade cutter 16 mm (No. 72175)
Model No. Model No.
16 mm tool set L (R 550, R 600, R 650) 72936 16 mm tool set S (R 550, R 600, R 650) 72937
Tool set L Tool set S

Ø 22 mm, 11 pieces Ø 22 mm, 6 pieces
11
Set (No. 72938) includes: ROCASE (No. 1300003334) with inlay (No. 1300003372),
separating key 22 mm (No. 72101), retrieving auger 16 mm (No. 72203), serrated
forked cutter 22 mm (No. 72250), spade head cutter 22/65 mm (No. 72261), bulb
auger 22 mm (No. 72263), two-way root cutter 22/65 mm (No. 72265), cross-blade
cutter 22/65 mm (No. 72276), chain-spinning head 22 mm with 2 smooth chains Set (No. 72939) includes: separating pin 22 mm (No. 72101), straight auger 22 mm
(No. 72284), guide gloves, left/right (No. 1500000439), ROWONAL spiral spray (No. 72221), serrated forked cutter 22 mm (No. 72250), spade head cutter 22 mm
(No. 72142) (No. 72261), bulb auger 22 mm (No. 72263), cross-blade cutter 22 mm (No. 72276)
Model No. Model No.
22 mm tool set L (R 600, R 650, R 750) 72938 22 mm tool set S (R 600, R 650, R 750) 72939
241
Flushing and pipe cleaning With Locking
Spiral and tool sets
Standard Ø 16 mm
Set (No. 072945X) includes: spiral basket 16 mm (No. 72110), 5 x 16 mm standard

spirals (No. 72431), straight auger 16 mm (No. 72161), bulb auger 16 mm
(No. 72163), blade cutter 16/25 mm (No. 72169), separating pin 16 mm (No. 72100),
guide gloves, left/right (No. 1500000439), ROWONAL spiral spray (No. 72142),
ROCASE (No. 1300003334) with inlay (No. 1300003372)
Standard 16 mm with standard spirals 12.0 072945X

Standard Ø 16 / 22 mm

spirals (No. 72431), straight auger 16 mm (No. 72161), bulb auger 16 mm (No. 72163),
blade cutter 16/25 mm (No. 72169), separating pin 16 mm (No. 72100), spiral basket
22 mm (No. 72112), 5 x 22 mm standard spiral (No. 72441), straight auger 22 mm (No.
72221), bulb auger 22 mm (No. 72263), funnel auger 22 mm (No. 72222), spade head
cutter 22/65 mm (No. 72261), serrated forked cutter 22/76 mm (No. 72250), separating
pin 22/32 mm (No. 72101), guide gloves, left/right (No. 1500000439), ROWONAL spiral
spray (No. 72142), ROCASE (No. 1300003334) with inlay (No. 1300003372)
Standard 16 - 22 mm with standard spirals 38.0 072956X

SMK 16 - 22 mm with SMK-spirals 39.0 072967X

Standard Ø 22 mm

spirals (No. 72441), straight auger 22 mm (No. 72221), bulb auger 22 mm (No. 72263),
funnel auger 22 mm (No. 72222), spade head cutter 22/65 mm (No. 72261), serrated
forked cutter 22/76 mm (No. 72250), separating pin 22/32 mm (No. 72101), guide
gloves, left/right (No. 1500000439), ROWONAL spiral spray (No. 72142), ROCASE
(No. 1300003334) with inlay (No. 1300003372)
11

Standard Ø 32 mm

spirals (No. 72451), straight auger 32 mm (No. 72321), retrieving auger 32 mm (No.
72325), funnel auger 32 mm (No. 72322), spade head cutter 32/65 mm (No. 72360),
spiral sawtooth cutter 32/65 mm (No. 72329), separating pin 22/32 mm (No. 72101),
guide gloves, left/right (No. 1500000439), ROWONAL spiral spray (No. 72142),
ROCASE (No. 1300003334) with inlay (No. 1300003372)
242
Accessories pipe cleaning spirals
Spirals 8 mm / 10 mm
For ROSPI H+E PLUS, ROSPI R 36 PLUS,
ROSPIMATIC and adaptor magazine
KEY FEATURES
Q eavy duty spiral made out of special steel (DIN EN 10270-1)
H
with integrated bulb auger (except No. 72421, 72423)
Q Suitable for ROSPI H+E Plus, ROSPI 36 Plus, ROSPIMATIC as
well as with adaptor R 600, R 650
Q The wire diameter with an 8 mm spiral averages Ø 2 mm,
and with 10 mm spirals Ø 2.5 mm
Q Easy to use, even in tight bends, especially with 8 mm spirals
also directly through sink strainers, crosses and drains without
having to disassemble the drain or stench tap
Steel Use for

mm Wire Ø m Type core ROSPI kg gNo.
6.4 2 mm 4.5 - - R 6 0.8 72522

8 2 mm 7.5 C1 - R 8 - R 36 1.8 72412
8 2 mm 7.5 C 1 - IC n R 8 - R 36 2.3 72413
8 2 mm 10.0 - - R 8 - R 36 2.4 72414
8 2 mm 10.0 - n R 10 - R 36 3.0 72415
10 2.5 mm 10.0 C5 - R 10 - R 36 3.5 72422
10 2.5 mm 7.5 C4 - R 10 - R 36 2.9 72420
10 2.5 mm 7.5 C 4 - IC n R 10 - R 36 72424
10 2.5 mm 7.5 - R 10 - R 36 72421* No. 72412 No. 72421 / No. 72423
10 2.5 mm 7.5 - n R 10 - R 36 2.9 72423*
*with T-groove coupling
Reducing / extension pieces

Extension piece
For spirals with T-coupling
Within limits, tools with larger or smaller lead-ins can also
be adapted
No. 72461
Reducing piece
Model negative positivekg g No.

11
Extension piece 16 mm 22 mm 140 72461
Reducing piece 22 mm 16 mm 150 72460
Extension piece 22 mm 32 mm 320 72463 No. 72460
Safety T-couplings Fixing of broken spirals!
for Standard and SMK-spirals
16 mm 22 mm
Model kg g 5/8” kg g 7/8”
No. 72210 No. 72211
for Standard and SMK-spirals
positive 20 72150 40 72210
negative 20 72151 40 72211
243
High-pressure drain cleaning

HD 13/100 HD 17/190
Operation mode: 230 V 400 V
Max. pipe diameter: Ø 150 mm Ø 200 mm
Max. working length: 20 m 40 m
Max. pressure: 100 bar 190 bar
Pump delivery: 13 l/min 17 l/min
Power: 2,300 W 5,000 W
HD 13/100 HD 17/190
100 bar high-pressure pipe 190 bar high-pressure cleaner
cleaning unit with hose reel with three-phase motor
Ø 150 mm
Ø 200 mm
11
Q Air-filled transport wheels, easy to navigate stairs Q T hree-phase motor, self-priming up to 2 m
Q AC supplied, self-priming up to 2 m Q Air-filled transport wheels, easy to navigate stairs
TECHNICAL DATA
TECHNICAL DATA Max. operating pressure: 190 bar Electric motor: Three phase
Max. operating pressure: 100 bar Pump delivery: 17 l/min Rating: 5.0 kW
Electric motor: AC supply Max. working length: 40 m Speed: 2,800 rpm
Pump delievery: 13 l/min
Rating: 2.3 kW
Max. working length: 20 m
Speed: 1,400 rpm
Scope of delivery: HD 13 / 100 (No. 76020), hose reel with 20 m special high-pressure Scope of delivery: HD 17 / 190 (No. 76070), hose reel with 40 m special high-pressure
hose (No. 72812) with couplings and pipe cleaning nozzle (No. 76089) hose DN 8 with couplings (No. 72820) and pipe cleaning nozzle (No. 76089)
Model kg g230 V / 50 Hz Model kg g400 V / 50 Hz
High-pressure pipe cleaning unit HD 13 / 100 45.0 76020 High-pressure pipe cleaning unit HD 17 / 190 50.0 76070
244
ACCESSORIES HD 13/100 – 17/190 –
19/180
No. 76067
11
Model kg g No.
Flexible, high-pressure hose with R 1/4” coupling

Length 40 m, NW 8 (HD 17/190, HD 19/180 B) 10.70 72820
Pipe cleaning nozzles R1/4”, stainless steel 0.04 76089
excl. forward jet spray, 4 holes, Ø 25 x 22 mm
incl. forward jet spray, 5 holes, Ø 25 x 22 mm 0.04 76065
Rotary nozzle 45°, 4 holes, Ø 16 x 30 mm 0.08 77506
Cleaning lance with wide-angle nozzle 1.30 76068
for surface cleaning
Spare wide-angle nozzle 0.01 76088
245
12
246
ROWELD
plastic pipe welding
Cutting
Orbital circular saw / pipe cutter 250
Socket welding
Socket welding units / heating plates 251 - 253
Electrofusion welding
Electrofusion welding units 255 - 257
Butt welding manual
ROWELD P 110 258 - 259
ROWELD P 160 SANILINE 260 - 261
ROWELD P 250 A 262 - 263
Butt welding hydraulic
ROWELD type Professional 264
ROWELD type Premium CNC 265
12
247
Plastic pipe welding
System overview
Cutting
ROCUT XL 125 ROCUT XL 225 ROCUT XL 315 ROCUT UKS 160 / 355
Suited for: PE PE PE PE, PP, PVC
Outer pipe diameter: Up to Ø 125 mm Up to Ø 225 mm Up to Ø 315 mm Ø 160 - 355 mm
Wall thickness: Up to max. 11,4 mm Up to max. 18 mm Up to max.18 mm Up to max. 40 mm
Operation mode: Manual Manual Manual Electrical
Function: Cutting Cutting Cutting Cutting
Page 250 250 250 250
Butt welding
Heating element HE 120 Heating element HE 200 Heating element HE 300
Suited for: PE, PP, PVDF PE, PP, PVDF PE, PP, PVDF
Outer pipe diameter: Up to Ø 120 mm Up to Ø 200 mm Up to Ø 300 mm
Wall thickness: – – –
Operation mode: – – –
Page 251 251 251
ROFUSE Sani 160 / 315 ROFUSE 400 TURBO ROFUSE 1200 TURBO
12
Suited for: PE PE, PP PE, PP
Outer pipe diameter: Up to Ø 160 / 315 mm Up to Ø 400 mm Up to Ø 1,200 mm1)
Fitting type: Fittings for drainage pipe systems Fittings for pressure pipe systems Fittings for pressure pipe systems
Voltage: 230 V 8 - 48 V 8 - 48 V
Documentation: –  
Page 255 256 256
1)
consider technical data of the socket
248
System overview
Socket welding
ROWELD P 63-S6 ROWELD P 125
Suited for: PE, PP PE, PP
Wall thickness: – –
Operation mode: Manual Manual
Function: Socket welding Butt welding,

socket welding
Page 252 - 253 251
Butt welding manual

ROWELD P 110 ROWELD P 160 ROWELD P 250 A
Suited for: PE, PP, PVDF PE, PP, PVDF PE, PP, PVDF
Outer pipe diameter: Ø 20 - 110 mm Ø 40 - 160 mm Ø 40 - 250 mm
Wall thickness: SDR see technical data SDR see technical data SDR see technical data
Operation mode: Manual Manual Manual
Page 258 260 262
Butt welding hydraulic

ROWELD type Professional ROWELD type Premium
12
Suited for: PE, PP, PVDF PE, PP, PVDF
Operation mode: Manual Automatic CNC controlled
Voltage: 230 V, 50 / 60 Hz 230 V, 50 / 60 Hz
Documentation: – 
Page 264 265
249
Cutting
ROCUT UKS 160 / 355
Central
High-performance orbital circular saw Ø 160 - 355 mm Saw blade guard clamping
Product profile Safe operation Optimum

pipe centring
APPLICATION AREA
For cutting of plastic pipes made of PE, PP and PVC.
For use on the building site or in the workshop
KEY FEATURES
Q Right-angled cuts with no misalignment
Q Efficient and economical operation with high cutting speed
Q Safe operation with saw blade guard
Q Optimum pipe centering
TECHNICAL DATA
Voltage: 230 V, 50 / 60 Hz
Power: 1,750 W No. 55505
Outer pipe diameters: 160 - 355 mm
Wall thickness pipe: 8 - 40 mm Rubberised guide rollers
Right-angled cuts with

no misalignment
Secure clamping and

Four rubberised optimum pipe centring
clamping and guide rollers are guaranteed by
Transport box without ensure right-angled cuts the central trapezoidal clam-
saw (No. 1200000526) with no misalignment ping device
Model kg g No.
ROCUT UKS 160 / 355, complete with 12.9 1000000532

HM saw blade (No. 55505), without transport box
Spare HM saw blade 180 x 30 mm 0.6 55505
Transport box 700 x 350 x 500 mm 16.8 1200000526
ROCUT XL
Pipe cutter for pipes Ø 125 - 315 mm
Product profile
For cutting-off pipes in trenches, for making repairs or extensions Q Can be easily adjusted anywhere at the pipe
Q Robust blade made of stainless steel
The lower clamp can be folded out com-

pletely. Therefore, ROCUT XL
An optimised cutting angle for easier can be used at any desired position of
pipe cutting the pipe
12
Replacement blade
Scope of delivery: 1 replacement blade + fastening screws

Model mm inch Wall thickness No. Model kg g No.
ROCUT XL 125 up to 125 mm 4” max. 11.4 mm 1500000789 For ROCUT XL 125 0.3 1500000793
ROCUT XL 225 up to 225 mm 8” max. 18 mm 1500000790 For ROCUT XL 225 0.7 1500000794
ROCUT XL 315 up to 315 mm 12” max. 18 mm 1500000792 For ROCUT XL 315 2.1 1500000795
250
Socket welding
ROWELD P 125
Socket welding unit for use with heating spigots and
heating sockets for Ø 16 - 125 mm, as well as adaptor
plates for butt welding
Product profile
APPLICATION AREA
With three simultaneously usable welding combinations
Heating spigots /
for free-handed working or workbench assembly using table Heating sockets
mounting clamp
KEY FEATURES
Process
Q reliability with the temperature control according to
DVS, CEN and ISO standards
Q With high-quality non-stick Teflon coating, long service life
and manufactured according to DVS regulations
Q Electronic temperature control and monitoring, as well as
prevention against unintentional temperature adjustment Adaptor plate
Q Saves time and money with quick-exchange system for
heating plates
Q Optimum temperature distribution over the entire working area
Q 4 holes for mounting of heating spigots and heating sockets
No. 55321
Heating spigots / Heating sockets (Form A)

Set (No. 55546) includes: basic unit, table
mounting clamp, heating spigots / heating
sockets 63, 75, 90, 100 and 125 mm, steel case Model kg g No. Model kg g No.
16 0.06 55585 50 0.37 55593

18 0.08 55587 63 0.60 55594
Power Control 230 V 19 0.08 55588 75 0.89 55595
Model watts mm Model kg 50/60
g Hz 20 0.08 55589 90 1.33 55596
25 0.10 55590 110 2.07 55597
P 125 1,300 16 - 125 electronically 3.10 55321 32 0.17 55591 125 2.33 55598
P 125 set 1,300 63 - 125 electronically 17.05 55546 40 0.26 55592
ROWELD HE heating plates

Heating plates for butt welding of PE, PP, PVDF and
PB pipes and fittings with Ø 20 - 250 mm
Product profile
APPLICATION AREA
Plastic pipe heating plates for free-handed working or workbench
assembly using table mounting clamp
KEY FEATURES
Q Long service life and manufactured according to DVS 12
regulations
Q Process reliability with the temperature control according
to DVS, CEN and ISO standards
Q Electronic temperature control and monitoring as well as Power Heating element Control 230 V 110/115 V
watts Ø mm Model kg g Hz
50/60 50/60 Hz
prevention against unintentional temperature adjustment
Q Save time and money with quick-exchange system for
heating plates 500 120/45° electronically 1.80 55518 55517
800 200 electronically 3.25 55316 55851
1,500 300 electronically 5.35 55317 55854
Table mounting clamp 0.45 55524 55524
ACCESSORIES
Table mounting clamp for P 125 0.45 55524 Floor stand for ROWELD P 125 0.44 55539
Adaptor plate for butt welding ROWELD P 125 Ø 160 mm (1 set = 2 pcs.) non-stick Teflon coating 1.15 55536
251
Socket welding
ROWELD P 63 S-6 Sword
Socket welding unit Ø 20 - 63 mm
Product profile
Socket welding unit for use with heating spigots and heating Q Light and handy for fatigue-free use
sockets Ø 20 - 63 mm with three simultaneously usable combi- Q Simple to use even in confined spaces
nations for welding sockets, pipes and fittings up to Ø 63 mm Q Floor stand is available at all times
Q Increased flexibility and combination options for every day use Power: 800 W
Q Long service life and according to DVS regulations Model: Thermostatic or electronically controlled
Q All important information at a glance Pipe diameter: For sockets, pipes and fittings
Q Safe operation with the temperature control as per
from Ø 20 - 63 mm
DVS regulations Voltage: 230 V, 50/60 Hz
110/115 V, 50/60 Hz
Control lamps for controls

and intervals
All important information at a glance
3 holes for mounting heating spigots Isolator prevents heat Temperature selector switch for electronic
and heating bushes transport to the case temperature control and monitoring
Increased flexibility and combination Efficient heat protection Process safety thanks to temperature control
options for every day use according to DVS
Heating spigots and heating bushes

(Ø 20 - 63 mm) with high-quality
PTFE-anti-stick-covering
Long service life and according to

DVS regulations
Automatic overheat
protection
Unit safety
12
Heating plate with an especially narrow sword form
Simple to use even in confirmed spaces
Unit has an integrated and retracable floor stand
Floor stand is always available when needed
252
Socket welding
ROWELD P 63 S-6 Sword sets Electronically controlled for
P 63 S-6 Sets include: Heating spigots, hex key size 6 (No. 321216),
socket-head screws, table mounting clamp, loor stand, plastic carrying case
a constant temperature!
Fig. P 63 S-6, thermostatically controlled Fig. P 63 S-6, electronically controlled
Power
Model Working range Ø mm watts Description kg g 230 V 110/115 V
P 63 S-6 set 20, 25, 32 800 thermostatic 4.30 053892X 053894X

P 63 S-6 set 20, 25, 32, 40, 50, 63 800 thermostatic 5.30 053893X 1000001245
P 63 S-6 set 20, 25, 32 800 electronically 4.30 053890X
P 63 S-6 set 20, 25, 32, 40, 50, 63 800 electronically 5.30 053891X
P 63 S-6 single unit 800 thermostatic 1.78 053897X
P 63 S-6 single unit 800 electronically 1.78 053896X
P 63 S-6 set thermostatically controlled Secure workbench operation, integrated holder for the table mounting clamp
12
Heating spigots and sockets (Form A) for P 63 S-6

With high-quality non-stick Teflon coating with a long service life
and manufactured according to DVS regulations
Working range Ø mm kg g No. Working range Ø mm kg g No.
20 80 53511 40 260 53514

25 100 53512 50 370 53515
32 170 53513 63 600 53516
253
12
PLASTIC PIPE WELDING TECHNOLOGY
ROWELD
SSERIES
Innovative and reliable highest quality pipetools and machinery

can be found in the hands of excellent skilled craftsmen and on
construction sites all around the globe.
rothenberger.com
ROWELD ROFUSE Sani 160 / 315
1)
Universal electro-fusion welding unit for drainage

pipe with welding sockets up to Ø 315 mm
Product profile
Universal electrofusion welding unit for PE drainage pipe fittings. Input voltage: 180 - 280 V (230 V)
For the following makes: Frequency: 40 - 70 Hz
Output voltage: 5 A controlled
40 - 160 mm: Geberit, Akatherm-EUR, Coes, Valsir,
Protection class: IP 54
WAVIN-Duo, Aquatherm and Vulcathene-Euro
Working range: up to Ø 160 mm (Sani 160)
200 - 315 mm: Valsir, Akatherm, Eurofusion, Geberit and Coes
up to Ø 315 mm (Sani 315)
KEY FEATURES Temperature range: -5 °C up to + 40 °C
Q icroprocessor controlled welding unit with automatic
M Weight: 2.4 kg (Sani 160)
temperature and voltage compensation 3.9 kg (Sani 315)
Q Icon-based software for intuitve and easy operation Dimensions: 110 x 200 x 80 mm
Q Visual monitoring of the welding process via large Welding cable: 3m
illuminated display
Q Robust and impact-resistant housing (IP 54)
Q Automatic welding parameter detection
Impact-resistant housing
Welding in (IP 54)
confined spaces
Robust
90° angled plugs
ensure low installation
height
Large illuminated display
Easy monitoring of the welding

process
Intuitive and easy operation
Icon-based software control

with automatic welding
parameter detection
3 m welding cable
Large operating radius
12
Connection to
230 V fitting welding machine
90° angeled plugs Robust packaging in ROCASE Pipe Pipe
Welding Finished joint
Model kg g No.
ROWELD ROFUSE Sani 160 in ROCASE 2.4 1000002630

ROWELD ROFUSE Sani 315 in ROCASE 3.9 1000002631

1)

ROFUSE 400 / 1200 TURBO 1)
Universal electrofusion welding units for PE- and PP- USB
pressure fittings up to 400 and up to 1,200 mm diameter
Product profile
KEY FEATURES TECHNICAL DATA:
Q Safety: The Heat-Control (HC) function evaluates based on Mains voltage: 230 V
ambient temperature, device temperature and fitting and checks Frequency: 50/60 Hz
if the next fitting can be welded completely. Power: 3,000 VA, 70 % ED
This process is fully automated and indicated through a green
Output current (nominal output): 80 A
or a red light shown on the display. This prevents any emergency
shut-off of the unit due to overheating. Welding voltage: 8 - 48 V
Q Performance: Due to the Active-Cooling (AC) function, the Ambient temperature: -10 °C up to 60 °C
unit is ideally fitted for continuous use since the heat removal Working range
is maximised by the installed ventilator. ROFUSE 400 TURBO: Fittings up to 400 mm
Q Complete solution: All cables are securely stowed away ROFUSE 1200 TURBO: Fittings up to 1,200 mm
inside the robust housing. The housing also offers sufficient Protection class: IP 54
space for accessories, tools or fittings. Transmission interface: USB v. 2.0
Q Professional documentation: All saved welding sequences
Storage capacity: 2,000 welding logs
can be transferred to a computer with a USB drive. From the Weight incl. welding cable: approx. 21.5 kg
computer the data can be archived and printed using the read
(Basic unit without accessories)
out programme “RODATA 2.0“.
Q Barcode generator: “RODATA 2.0“ offers also the possibility
to encrypt the name of the welder and the name of the
construction site as a barcode. This barcode can then be
scanned at the job site.
Language neutral instruction manual Practical pocket

for the welder’s name
Easy to operate
and scan site-code
Height-adjustable
cover
Can be used
USB as a sun shield
Simple data transmission
Robust housing
The cable can be
stowed away securely
Clear display
Allows intuitive operation.
The program sequence can be
adapted individually
12
Wireless scanner
Simple and unlimited handling
ROFUSE 400 TURBO 21.5 1000000999 ROFUSE 1200 TURBO 21.5 1000001000
1)
Peeling device for electric Clamping device for
socket welding electric socket welding
For secure, quick preparation of the pipe, in transport case. For alignment and fixation
of the pipe before and during
the welding cycle.
Double clamp short

For alignment and fixation
of the pipe before and during
the welding cycle.
Quad clamps
For manufacturing standard
connections with rod shaped
material Ø 63 - 225 mm.
Model Ø Working range No.
Size I 32 - 110 mm 53240

Size II 110 - 500 mm 53250 Rounding clamps
For fixation of the welding depth
and for rounding PE pipes after
squeezing.
Squeezing device
n Mechanical:
Range of use from Ø 32 - 63 mm.
To avoid damage to the squeezed area,
distance plates can be adjusted on the side.
n Hydraulic:
Range of use from Ø 75 - 225 mm.

Functions as mentioned above.
With this unit you can reform squeezed
pipes with the help of the rounding shells.
Model Ø No.
Double clamp adjustable 32 mm 53251

Double clamp short 75 mm 53255
Double clamp short 160 mm 53260 12
Quad clamp 63 mm 53271
Model Ø Working range No. Quad clamp 225 mm 53280
Rounded clamp 25 mm 53281
Squeezing device mechanical 32 - 63 mm 53200 Rounded clamp 32 mm 53282
Squeezing device hydraulic 75 - 180 mm 53210 Rounded clamp 40 mm 53283
Squeezing device hydraulic 160 - 225 mm 53220 Rounded clamp 63 mm 53285
257
Plasticpipe welding
Butt welding
ROWELD P 110
Plastic pipe welding machine Ø 20 - 110 mm
Product profile
For butt welding of pipes and fittings made of PE, PP, PB and
Q Production of pipe and fitting joints
PVDF. Particularly suited for installation work and for work in Q Secure hold and simple axial pipe alignment
confined spaces - also in pipe networks TECHNICAL DATA
KEY FEATURES Pipe diameter: Ø 20 - 90 mm (SDR 41 - SDR 7.25)
Q Production of segmented bends possible Ø 20 - 110 mm (SDR 41 - SDR 11)
Q Precise pressure adjustment Weight: 8.5 kg
Q Single and double-sided trimming possible Size: 450 mm total length
ide aluminium reducer clamp

W
inserts (Ø 20 - 90 mm) for pipes
Narrow basic clamping elements can be used and pipe joints
Segmented bends can be produced Secure hold and simple axial pipe
alignment
echanical stop adjustable from

M
both sides
Single and double-sided

Angles of the wide basic clamping
trimming possible
elements adjustable on both sides
(15° each)
Segmented bends can be produced
Direct force transmission and clear

Hardened, chrome-plated guide shafts force scale
Absolutely warp-resistant Precise pressure adjustment
By adjusting the basic clamping

Joints between fittings and pipes element angles on both sides
12 with narrow and wide clamping (15° each side) segmented bends
Rectangular heating element elements can be produced
Set (No. 55844) includes: Basic machine (No. 55787) with table mounting brackets, manual trimmer unit (No. 55826),
electronically controlled heating plates, basic clamping set R/R (No. 55807) (Ø 110 mm) and basic clamping set R/F, left
(No. 55808) (Ø 110 mm), reducer clamping inserts R/R and R/F for Ø 40 - 90 mm, assembly tools, table mounting clamp
(No. 55524), transport box (No. 55832)
Working range 230 V 110/115 V

Model Ø mm Temperature control kg g 50/60 Hz 50/60 Hz
ROWELD P 110 complete 40, 50, 56, 63, 75, 90, 110 electronically 43 55844 55924
258
Butt welding
ROWELD P 110 basic machine
Model kg g No.
ROWELD P 110 basic machine 6.8 55787

with table mounting bracket
Basic clamping set 110 mm

Model kg g No.
For wide/pipe joints (1 set = 2 clamps) 2.5 55807

For narrow/fitting joints, left (1 clamp) 1.0 55808
For narrow/fitting joints, right (1 clamp) 1.0 55809 No. 55807 No. 55808 / No. 55809
Reduction inserts wide P 110

Each set includes 4 aluminium half-shells
mm kg g No. mm kg g No.
20 1.9 55318 56 1.6 55122

25 1.9 55126 63 1.4 55121
32 1.8 55125 75 1.6 55120
40 1.7 55124 90 1.1 55119
Reduction inserts narrow P 110

Each set includes 4 metal half-shells
20 0.6 55319 56 0.5 55130

25 0.6 55134 63 0.5 55129
32 0.5 55133 75 0.4 55128
40 0.5 55132 90 0.3 55127
Manual trimmer unit

Model kg g No.
With machine holder 1.90 55826

Spare blade (1 set = 2 blades) 0.05 55152
Heating plate
With non-stick Teflon coating, 180 x 130 mm, 800 W
No. 5.5324
230 V 110/115 V 12
Model kg g50/60 Hz 50/60 Hz
Electronically controlled 2.6 55324 55918

Table clamp 0.7 55524 55524
Flange adaptor clamping unit

For centred welding of flanges
Model kg g No.
Flange adaptor clamping unit 1.50 55199

Steel carrying case (540 x 345 x 355 mm) 14.20 55832
Hex key SW 6 0.03 321216
Hex key SW 8 0.05 321218
259
Butt welding
ROWELD P 160 SANILINE
Plastic sanitary pipe welding machine from Ø 40 - 160 mm
Product profile
For butt welding of PP, PB and PVDF pipes and fittings, especially Q Minimum drag force
suitable for 45° branches and tight elbows. For use on building Q 40% higher stability with simultaneously optimised
sites or in the workshop force distribution
KEY FEATURES Q All common sanitary installation fittings can be clamped
Q ersatile for difficult situations with the removable heating plates
V TECHNICAL DATA
Q Secure clamping of pipes, fittings, tight 45° branches and Pipe diameter: Ø 40 - 110 mm (SDR 41 - 7.25)
90° elbows Ø 40 - 140 mm (SDR 41 - 11)
Q Protects against unintentional starting and derailing of the Ø 40 - 160 mm (SDR 41 - 17.6)
trimmer unit Weight: 34.4 kg
Q Precise pressure adjustment Heating plate: 800 W
Trimmer unit: 1,050 W
Multi-faceted options for clamping
All commonly used moulded bodies

installed in a sanitary installation
The pressure applied can be
can be clamped
adjusted separately on both sides
One-sided and two-sided milling

Anti-slip Ø 40 - 140 mm reduction
is possible
clamping inserts with clamping
force regulation
Secure mounting of pipes, moulded

bodies, tight 45° forks and 90°
bends
Direct force transmission and

a clearly arranged force scale
ROCASE 4414 Precise force adjustment
Additional storage for accessories

and tools
P 160 SANILINE complete

(No. 1000002964)
12 Trimmer attachment Basic clamping set

(No. 54040) (special accessories) (No. 54082) (special accessories)
Set (No. 1000002964) includes: Basic unit with electric trimmer, electrically adjustable heating element, removable.
Pipe support Ø 160 mm, reducer clamp and support set for Ø 40, 50, 63, 75, 90, 110 and 125 mm in ROCASE 4414 (No. 1000002970),
installation tools, mobile work and transport frame (No. 1000002971)
Working range 230 V

Model Ø mm Temperature control kg g 50 Hz
ROWELD P 160 SANILINE 40, 50, 63, 75, 90, 110, 125, 160 electronically 57.4 1000002964
ROWELD P 160 SANILINE 40, 50, 63, 75, 90, 110, 125, 160 incl. 56 mm insert electronically 57.5 1000002967
260
Butt welding
basic machine
Basic machine includes: Trimmer unit (1,050 W), heating plate
(800 W), basic clamp set Ø 40 - 160 mm
230 V
Model kg
g 50 Hz
ROWELD P 160 SANILINE 34.4 54005

Basic machine
Reduction inserts P 160 SANILINE

Set includes: Reducer inserts (4 half-shells), pipe supports

Nominal size kg g No. Nominal size kg g No.
40 1.6 54083 90 1.6 54088

50 1.6 54084 110 1.7 54089
56 1.6 54085 125 1.5 54090
63 1.6 54086 140 1.5 54091
75 1.6 54087
Trimmer adaptor P 160 SANILINE

Ø 40 - 75 mm for trimming 45° branches, replaceable blades
Model kg g No.
Trimmer attachment for Ø 40 - 75 mm 0.63 54040
Basic clamping set P 160 SANILINE

For outer clamping position, especially for welding pressure pipes,
includes 2 basic clamps, left and right, up to Ø 160 mm
Model kg g No.
Basic clamping set Ø 160 mm 5.3 54082

Conversion Kit
Converting existing ROWELD P 160 SANILINE with universal
clamp system
12
Set (No. 54080) includes: Basic clamping set Ø 160 mm left and right, (No. 54082) as
well as two reducer clamping sets (left and right) for the diameters 40, 50, 63, 75,
90, 110 and 125 mm
Model Working range Ø mm kg g No. No. 54080
Conversion Kit 40, 50, 63, 75, 90 11.20 54080

110, 125, 160
Trolley and transport sub-frame 11.30 1000002971 No. 56051 No. 1000002971
Folding trolley 20.00 56051
ROCASE for reducers 1.70 1000002970
Open-ended spanner SW 17 DIN 894 0.05 310411
Trimmer unit blades 75 mm (set = 2 blades) 0.10 55685
Blades 35 mm for trimmer adaptor 0.01 55686
Heating plate 230 V / 115 V / 110 V 1.92 55316 / 55851
Trimmer blade, carbide 75 mm (set = 2 blades) 0.05 55684
261
Butt welding
ROWELD P 250 A
Plastic pipe welding machine Ø 40 - 250 mm
Product profile
For use on building sites and in the workshop. Particularly suited n Precise welding pressure adjustments on the clear force scale
for sanitary installations, drain pipe laying as well as chimney n Reliable, warp-resistant transfer of the welding pressure
reconditioning with PVDF liners n Stable working table always available
Q ersatile for difficult situations with the removable heating plates
V Pipe diameter: Ø 40 - 110 mm (SDR 41 - SDR 7.25)
Q Protects against unintentional starting and derailing of the Ø 40 - 125 mm (SDR 41 - SDR 11)
trimmer unit Ø 40 - 200 mm (SDR 41 - SDR 17.6)
Q Single and double-sided trimming possible Ø 40 - 225 mm (SDR 41 - SDR 26)
Ø 40 - 250 mm (SDR 41 - SDR 33)
Q Warp-resistant for minimum drag and low pressure transfer loss
Weight: 36.4 kg
Trimmer unit: 450 W
Heating plate: 1,200 W
Electric, high-torque safety trimmer unit (450 W) Mechanical stop adjustable

locks into place in the working position from both sides
Protects against unintentional starting and derailing Single and double-sided

of the trimmer unit trimming possible
Removable heating plate
Versatile for difficult situations
Rugged basic clamping set Ø 250 mm

with reducer inserts for Ø 180 - 225 mm
plus pipe supports and Ø 160 mm
set with reducer inserts for Ø 40 - 140 mm
plus pipe supports
Reliable, warp-resistant transfer of

the welding pressure
12
Mounted machine carriage is smooth running, hardened,

chrome-plated ball lining driven in guide shaft
Warp-resistant, for minimum drag force and low

loss of pressure transfer
Working range 230 V

Ø mm Temperature control kg g
50 Hz
Model
ROWELD P 250 A Set 40, 50, 56, 63, 75, 90, 110, 125, 160, 180, 200, 225, 250 electronically 131.0 55795
ROWELD P 250 A basic machine 36.1 55768
262
Butt welding
ROWELD P 250 A set
Basic machine with trimmer unit
Set (No. 55795) includes: holder for heating plate, electronically adjustable heating plate,
basic clamping set Ø 160 mm and 250 mm support fork inserts Ø 160 mm and 250 mm,
reducer inserts and support fork inserts from Ø 40 - 140 mm and Ø 180 - 225 mm, installation
tools, steel transport box 800 x 520 x 765 mm (L x W x H) and steel carrying case for reducer
and support fork inserts
Basic clamping set P 250 A

Set includes: 2 basic clamps and 2 support forks
No. 55742
160 7.25 55742 250 10.10 55717 No. 55717
Reduction inserts P 250 A

Each set consists of: Pipe clamping inserts (4 metal half-shells) and
support fork inserts (2 metal half-shells) for basic clamping set
(No. 55742)
32 1.89 55753 110 1.26 55746

40 1.89 55752 114 1.20 55745
50 1.81 55751 125 1.06 55744
56 1.83 55750 140 0.80 55743
63 1.75 55749 180 2.46 55721
75 1.68 55748 200 2.03 55718
90 1.50 55747 225 1.41 55719
12
Heating plate
Non-stick Teflon coating. Ø 300 mm, 1,500 W
230 V 110 V / 115 V

kg
Model 50g / 60 Hz 50 / 60 Hz
Electronically controlled 5.35 55317 55854

Spare knife (1 set = 2 pcs.) 0.10 55163
Hex key size 8 0.20 321218 321218
Transport box, protective cover red 25.00 55759 55759
No. 55317 / No. 55854
Steel carrying case 2.82 54020 54020
263
Butt welding
ROWELD type Professional
Hydraulic butt welding machine Ø 40 - 1,200 mm
Selection of components with a long service life ensures
a low maintenance, robust and reliable operating mode.
Product profile
APPLICATION AREA WORKING RANGE
For heating element butt welding of PE, PP and PVDF pipes Model Ø mm
and moulded bodies. For use on the building site, in pipe P 160 B 40 - 160 mm
trenches, on pipe bridges and in workshops. The ROWELD P 200 B 63 - 200 mm
hydraulic type Professional with infinite pressure adjustment, P 250 B 90 - 250 mm
an easily legible manometer and pressure reservoir for welding P 355 B 90 - 355 mm
P 500 B 200 - 500 mm
according to DVS and other internationally valid guidelines
P 630 B 315 - 630 mm
and standards. P 800 B 500 - 800 mm
P 1200 B 710 -1,200 mm
Flexible
The 3rd basic

clamping element
can be moved flexibly
Simple operation Safe
Ideally matched Perfect parking for trimmer

components allow precise and heating plate
start-up of the pressure
Robust, torsionally
Set P355B rigid frame
No. 1000000383
Allows reliable weldings in
virtually any environment
12 Fig. similar
Supply of power for heating Professional Hydraulic with large,

element and trimmer unit over Electronic control for heating easily legible manometer as well as
Professional Hydraulic element can be placed flexibly a pressure limiting and pressure The pull-off fixture allows rapid
(P 160 B-P 355 B) using a magnet (P 355 B) relieving valve lifting out of the heating element
264
Butt welding
ROWELD type Premium CNC
Hydraulic butt-welding machine Ø 90 - 1,200 mm
The Premium CNC System enables a nearly fully automated
operation. All parameters are documented automatically.
Product profile
The ROWELD Hydraulic Premium CNC with integrated CNC Automatic logging: 10,000 logs
control and touch screen panel for the quick and reliable saving Data output: USB interface
of the welding parameters in accordance with DVS and other Languages: DE, EN, FR, ES, NL, PT, DK, SE, NO, FI, PL,
applicable international guidelines and standards. Data transfer TR, HU, SL, SK, RU, BG, futher languages
via USB interface. available upon request
WORKING RANGE Welding monitoring: Optically with colour indication for
welding pressure, welding temperature,
Model Ø mm welding times, as well as acoustical and
P 250 B SA 90 - 250 mm optical for user actions
P 250 B VA 90 - 250 mm Logging: in accordance to DVS
P 355 B SA 90 - 355 mm Welding standards: DVS, further standards available upon
P 500 B SA 200 - 500 mm request, manual entry of welding
P 630 B SA 315 - 630 mm parameters is possible
With CNC function: During the welding process, all move-
SA = semi-automatic, VA = fully automatic
ments are performed by the machine,
including dragging resistance and bead
development measurement. Automatic
extending heading element enables a
fully-automatic welding process (optional,
Flexible
not available for all machines)
The 3rd basic
clamping element
can be moved flexibly
Simple operation Safe
Ideally matched Perfect parking for trimmer

components allow precise and heating plate
start-up of the pressure
Robust, torsionally
Set P 355 B rigid frame
No. 1000000563 Allows reliable weldings in
virtually any environment
12
Trimmer with safety switch. Safe operation – Automatic calculation,

Simple operation via touch Secures against unintended control and inspection of the welding The pull-off fixture allows rapid
control panel activation of the trimmer parameters lifting out of the heating element
265
Butt welding
The new generation of ROWELD
hydraulic controls for butt welding
The ROWELD hydraulic unit is available in a Professional and Premium version.
The premium hydraulic unit is divided into Premium and Premium CNC capacities.
Everything
at a glance…
Fig. similar
Type Professional Type Premium CNC
Temperature control • •
Pressure reading analogue • —
Pressure reading digital — •
Pressure hold function • •
Logging system — •
Position sensor — •
Automatic parameter calculation — •
CNC-control — •
Touch screen — •
Colour display 3.5“ — •
Menu language
Multi-lingual
— •
USB port — •
12
266
Chamfering
Plastic pipe chamfering unit
With replaceable blades Ø 16 - 160 mm KEY FEATURES
For 15° outer chamfers on plastic pipe
Q Flexible in use
Q Wall thickness is continuously adjustable
kg g
Model mm No.
Chamfering unit size 1 16 - 110 720 55050

No. 55051
Chamfering unit size 2 32 - 160 800 55051
Spare blade size 1 and 2 30 55058
12
267
13
268
Refrigeration and air-
conditioning technology
Complete solutions
Comissioning and maintenance 272 - 273
Evacuation and charging 274
Refrigeration circuit control
Digital manifold 275
Analogue manifold 276
Pressure hose 277
Tool set 277
Leak testing and locating
Nitrogen set 278
Leak detection devices 279
Evacuation
Vacuum pumps 280 - 281
Recovery and filling
Refrigerant recovery device 282 - 283
Refrigerant 284
Refrigerant scale 285
Accessories
Cleaning, tools, adaptors 286 - 287
Instructions for the use of refrigerants 288
Conversion tables pressure, temperature 293
13
269
Refrigeration and air-conditioning technology
System overview
Complete solutions
ROKLIMA MULTI 4F ROCADDY 120 R32 Analogue ROCADDY 120 R32 Digital
Refrigerants class A1:

(R134a, R410A etc.)   
(R32, R1234yf etc.)
–  
CO² subcritical (R744): – – 
System size: < 24 kW < 24 kW < 24 kW
Page 272 - 273 274 274

ROCOOL 600 2- and 4-ways 2- and 4-ways Pressure hoses
manifold manifold
connection 5/16” connection 1/4”

(R134a, R410A etc.)    
Refrigerants class A2: –
(R32, R1234yf etc.)   
CO² subcritical (R744):  – – 
System size: all all all all
13 Page 275 276 276 277
270
System overview
Evacuation
ROAIRVAC R32 1.5 ROAIRVAC R32 3.0 ROAIRVAC R32 6.0 ROAIRVAC R32 9.0

(R134a, R410A etc.)    
(R32, R1234yf etc.)    
CO² subcritical (R744):    
System size: < 24 kW < 74 kW < 123 kW > 124 kW
Page 280 - 281 280 - 281 280 - 281 280 - 281
Recovery
ROREC ROREC PRO Digital

(R134a, R410A etc.)  
(R32, R1234yf etc.)
– 
CO² subcritical (R744): – –
System size: < 24 kW all
Page 282 283 13
271
Complete solutions
ROKLIMA MULTI 4F
10 g
Fully automatic commissioning and maintenance of
air-conditioning units and heat pumps 1)
The innovative unit enables safe and comfortable operation on

refrigeration systems. With simple menu navigation, 4 functions (4F) 2,5 m
are automatically controlled. R410A R22 R134a R407C R404A
Product profile
Pressure
Q resistance up to 80 bar guarantees full use with Weight: 17 kg
heat pumps Final vacuum: 1 x 10 -2 mbar
Q Everything you need within reach Scale range: up to 100 kg
Q Simple menu guidance guarantees appropriate use Resolution: 10 g
Q Fully automatic control gives time for parallel work Pressure hose length: 2,500 mm
Q Safe transport Pump rating: 42 l / min
4F
n Evacuation
n Charging
n Leakage test
n Control of the recovery process
Interactive 16-digit display
with 4 function buttons
All required parameters

can be easily entered
Sturdy, compact
metal casing
Protects all components

such as vacuum pump 3 different pressure gauges
and scale ”Pulse-free”, class 1.6, 80 mm
Universal use on air-conditioning

units with all common refrigerants
and operation in the high pressure
range with R410A
2 pressure hoses (2,500 mm)

Integrated high
from the series “Plus” with
vacuum pump with
ball valve
42 l/min suction power
Safe and comfortable operation
For evacuation of the
with refrigerants without the risk
system in accordance
of refrigerant loss
with DIN 8975
Plastic capillary hose
Safe, leak-free filling due to

Pull-out precision digital shut-off valve
scale up to 100 kg
Secure stand for large and

small containers
13 Shock-resistant low pressure

and high pressure gauges for Pressure hoses: 2.5 m long with Bottle adaptor No. 173204 / 05 for scale
various refrigerants Secure storage of all accessories shut-off valve and 1/4“ reducing pieces
1)
Complete solutions
Automatic Automatic supervision
evacuation and and control of the
filling with the recovery process in
ROKLIMA MULTI 4F! refrigeration cycles!
ROKLIMA MULTI 4F in use (evacuation and charging)
Set (No. 1000000138) includes: 2-stage vacuum pump, 2 low pressure gauges, Model No.
kg g
1 high pressure gauge R410A, 2 pressure hoses with ball valve à 2,500 mm, 2 bottle
connection adaptors (1/4“ SAE No. 173205, 5/16“ SAE No. 173204), 2 reducing pieces
1/4” SAE F - 5/16” SAE M (No. 170016), precision digital scale up to 100 kg, automatic ROKLIMA MULTI 4F 17.0 1000000138
control, vacuum and pressure switch, mineral oil (No. 169200) Reducer pieces 1/4” SAE F - 5/16” SAE M 0.1 170016
Secure storage of accessories: pres-

sure hoses bottle adaptor, plastic
Precision scale up to 100 kg
Resolution: 10 g
13
capillary hose Accuracy: ± 1% Ergonomic, compact Light
273
Complete solutions
1,5 m
ROCADDY 120 R32 Analogue / Digital

Universal sets for evacuation and charging
Product profile
Q Everything you need within reach Q Electric digital scale ROSCALE 120 with a weight capacity of
Q Flexible use with the individual use of the tools 120 kg and a measuring accuracy per measurement of 5 g
Q Easy to transport Q 2-stage vacuum pump ROAIRVAC R32 1.5 with integrated
vacuum meter and solenoid valve, as well as a pump rating
of 42 l/min
Q Digital manifold (with ROCADDY 120 R32 Digital) for the
automatic calculation of superheat and subcool. More than
80 refrigerants are on file in the unit
Q 2 analogue 4-way manifolds (with ROCADDY 120 R32 Analog)
for the common refrigerants R22, R134a, R404A, R407C and
the high-pressure refrigerant R410A
Q Pressure hose sets, each with 3 hoses from the “Plus” series
Sturdy plastic rolling case (fig. similar)
with shut-off valve for safe use with refrigerants
Simple and comfortable transport with Q Pipe cutter TUBE CUTTER 35 and MINICUT II PRO for cutting
ample room for accessories and small parts Ø 6 - 35 mm pipes to length
Bottle adaptor for 1 kg

and 2 kg refrigerant
bottles for connection
to the scale
Secure mounting of the

bottle during charging
2 x analogue manifolds
(with ROCADDY 120 R32
Anlogue)
2-stage high vacuum pump
For evacuation and removal of all

moisture residue in refrigeration
systems during installation per
DIN 8975
ROCOOL 600
Automatic calculation of
superheat and subcool.
Optionally upgradable
through attachment of
a vacuum probe and
a reading out function
Electronic digital scale up to 120 kg Mini tube cutter and (with ROCADDY 120 R32
with high measurement precision pipe cutter Digital)
Precise weighing of refrigerants For cutting Ø 6 - 35 mm
pipes to length
ROCADDY 120 R32 Analogue (No. 1000002560) includes: 2-stage vacuum pump
13 ROAIRVAC R32 1.5 (No. 1000002399) with vacuum gauge and solenoid valve, 4-way
manifold for R22, R32, R134a, R407C (No. 170502), 4-way manifold for R410A ROCADDY 120 R32 Digital (No. 1000002561) includes: 2-stage vacuum pump
(No. 1000001427), pressure hose set 5/16” SAE each 1,500 mm with ball valve for ROAIRVAC R32 1.5 (No. 1000002399) with vacuum gauge and solenoid valve, 1x digital
R410A (No. 1500000030), pressure hose set 1/4” SAE each 1,500 mm with ball valve for manifold ROCOOL 600 (No. 1000000569), 1x clamping thermometer (No. 1000000540),
R22, R32, R134a, R407C (No. 1500000028), ROSCALE 120 (No. 173004), 1x adaptor 3/8” pressure hose set 1/4” SAE each 1,500 mm with ball valve for R22, R32, R134a, R407C
SAE F – 1/4” SAE M (No. 89501), 2x adaptor [5/16” SAE F–1/4” SAE M with valve trigger (No. 1500000028), ROSCALE 120 (No. 173004), 1x 5/16” SAE F – 1/4” SAE M with valve
(No. 01700RD), adaptor 5/16” SAE M – 1/4” SAE F (No. 170016)], bottle connection 1/4” trigger (No. 01700RD), 1x 5/16” SAE M – 1/4” SAE F (No. 170016), bottle connection 1/4”
(No. 173205), bottle connection 5/16” (No. 173204), mineral oil (0.4 l), TUBE CUTTER (No. 173205), bottle connection 5/16” (No. 173204), mineral oil (0.4 l), TUBE CUTTER 35
35 (No. 70027), MINICUT II Pro (No. 70402), transport case (No. 169051) (No. 70027), MINICUT II Pro (No. 70402), transport case (No. 169051)
Model Performance kg g No. Model Performance kg g No.
R410A R22 R134a R407C R404A R32 R410A R22 R134a R407C R404A R507 R32
ROCADDY 120 42 l / min 20 1000002560 ROCADDY 120 42 l / min 19 1000002561
R32 Analogue R32 Digital
274
ROCOOL 600 1)
For commissioning, maintenance work and

documentation of refrigeration systems of all kinds
Product profile
Q odular system: The basic device can be fitted with the
M Pressure display: bar, psi, Kpa, MPa
optional Red Box incl. the Data Viewer software for reading Temperature display: °C, °F
out or recording data on a PC. Vacuum display: Micron, mbar, mmHg, Pa, mTorr
Q More than 80 refrigerants incl. R32 and R744 (sub-critical) are Power source: 9 V battery, 550 mAh
stored in the device. New refrigerants can be added later using
Screen size: 4.1/3“ / 11 cm
the update function
Pressure measurement range: -1 up to 60 bar
Q Simultaneous calculation of superheat and subcool
Precision (at 22 °C): ± 0.5% fs
Q The documentation software Data Viewer generates an
automatic report based on the data recorded. Ideal for handing Temperature measurement range: -50 °C to +200 °C
out to the customer (client) Working temperature: -10 °C to +50 °C
Q An external Pirani vacuum probe allows reading of the vacuum Connections: 4x 1/4“ SAE
where the most precise measurement is possible: directly at the Max. recording time: 12h (device), 96h (red box)
refrigeration system
An absolute all-rounder due to
the unique modular system!
Large screen
All important data at a

single glance. Strong backlight Solid and non-tacky rubber coating
for dark environment Prevents shock damages and allows a safe handling
Connection for the

Connection for the temperature sensor T2
temperature sensor T1
For automatic measurement of
For automatic measurement subcool data
of superheat data
Green and red LEDs
An optical signal is displayed

Connection for the external once an adequate vacuum level
vacuum probe is reached or leakage in the
system and also a warning of
For very precise measurement overpressure
of the vacuum level directly
at the refrigeration system
Pressure sensors
“Made in Germany”
Connection of the Red Box
Precise measurement
from -1 to 60 bar To record data for up to 96 hours
and independent read out of
data at a PC
T-connection with
Schrader valve 1/4“ SAE External vacuum probe for very
Temperature sensor for a pipe dia- precise measurement
3-way function: Evacuation and meter of up to Ø 32 mm of the vacuum
filling without changing a hose
Y-connections 1/4“ SAE
A connection and sealing plug

in one. Simple transport of hoses
when not in operation
13
Set (No. 1000000569) includes: ROCOOL 600, 1 temperature sensor
Set (No. 1000000570) includes: ROCOOL 600, 2 temperature sensors, carry case
Set (No. 1000000572) includes: ROCOOL 600, 2 temperature sensors, red box and Set (No. 1000000539) includes: Red box, data viewer software, connection cable,
data viewer software, carry case external power supply
Model No. Model No.
Set with 1 temperature sensor (in the blister) 1000000569 Red box, software, connection cable, 1000000539
Set with 2 temperature sensors (in the case) 1000000570 external power supply
Set with 2 temperature sensors, red box, 1000000572 Temperature sensor 1000000540
data viewer software (in the case) Vac probe 1000000541

1)

Analogue manifolds
2- and 4-way manifolds
Pressure gauge with shock-proof

rubber protector
Protects against damage

Pressure gauge Ø 80 mm, with
pulse-dampening class 1.6
Easy-to-read, high precision

display Valve body made of aluminium
with gauge glass
Sturdy despite low weight
Large hand valve with

colour coding 2-way manifold
Light, secure and precise opening
and closing of the diaphragm
valve, maintenance free
Valve sets
Model ND*/bar HD*/bar kg g No.
R22 R134a R407C R404A

2-way, 1/4” SAE -1 up to 17 0 - 34 0.7 170501
4-way, 1/4” SAE -1 up to 17 0 - 34 0.9 170502
Model No.
R410A R32
2-way, 5/16” SAE -1 up to 30 0 - 60 0.7 1000001426 Blue rubber protector for manifold 170545
4-way, 5/16” SAE -1 up to 30 0 - 60 0.9 1000001427 Red rubber protector for manifold 170546
*LP = Low pressure manifold, *HP = High pressure manifold Valve sets for manifold 170547
Manifold sets
Manifold sets and pressure hoses 1,5 m
2-way manifold (for 170600 and 170607)

4-way manifold (for 170601, 170606, 170602 and 170608)
Durable and highly precise tool
Sets include: manifold, pressure gauge with Ø 80 mm, “Pulse-free“, class 1.6,
3 x 1,500 mm pressure hoses, plastic carrying case
Model kg g No.
2-way ”Standard”
R22 R134a R407C R404A
Manifold set 2-way ”Standard” 2.7 170600
R410A R32
13 Manifold set 2-way ”Standard” 2.7 170607
4-way ”Standard”
R22 R134a R407C R404A
Manifold set 4-way I ”Standard” 2.8 170601
R410A R32
Manifold set 4-way I ”Standard” 2.8 170606
4-way ”Plus”
R22 R134a R407C R404A
No. 170602
Manifold set 4-way II ”Plus” 2.8 170602
Pressure hose with ball valve “Plus”
(only for 170602 and 170608) R410A R32
No loss of refrigerant Manifold set 4-way II ”Plus” 2.8 170608

Plastic carry case 1.4 171505
276
3-piece pressure hose sets St
andard
fo
Safety
r
Available in “Standard” and “Plus”
S AE
1,5 m
Product profile
R32 R410A R22 R134a R407C R404A
KEY FEATURES
Q o confusion and safe use with the colour coding
N
(blue, red, yellow)
Q Teflon seal with up to 10 x longer service life compared
to neoprene seal
Q Working pressure 60 bar / burst pressure 300 bar.
This is an 8% better pressure resistance as previously
“Standard” series “Plus” series
Pressure hose from the series “Standard” Pressure hose from the series “Plus” with ball valve
Model Connection L mm No. Model Connection L mm No.
Vacuum hose 3/8” SAE 1,500 1500000032 R22 R134a R407C R404A
R22 R134a R407C R404A Set of 3 pressure hoses 1/4” SAE 1,500 1500000028
Set of 3 pressure hoses 1/4” SAE 1,500 1500000024 Pressure hose yellow 1/4” SAE 1,500 1500000029
Pressure hose yellow 1/4” SAE 1,500 1500000025 R410A R32
R410A R32
Set of 3 pressure hoses 5/16” SAE 1,500 1500000030
Set of 3 pressure hoses 5/16” SAE 1,500 1500000026 Pressure hose yellow 5/16” SAE 1,500 1500000031
Pressure hose yellow 5/16” SAE 1,500 1500000027
Tool set Climate I + II R32 R22 R134a R407C R404A

Practical tool set with all tools required
For installation and maintenance of air-conditioning units
and heat pumps
The ideal introduction into a
whole new area of business!
Product profile
APPLICATION AREA
Q Monitor temperature and pressure
Q Quality hoses with high bursting pressure
Q Pipe cutter for all pipe cross-sections from
3 - 35 mm (1/8“ - 1.1/8“)
Q Measurement of ambient and ventilator air temperature
Q Clean, kink-free bending of all common pipe cross-sections
Q Optimum flaring connections for all types of air-conditioners 13
Set Climate I (No. 170604) includes: 2-way manifold (No. 170501), set of pressure
hoses standard 1/4“ SAE, TUBE CUTTER 35 C (No. 070027C), MINICUT pipe cutter
(No. 070401C), thermometer, set of bending springs 3/8“ - 1/2“ - 5/8“, universal
flaring tool (No. 222601), plastic case
Set Climate II (No. 170605) includes: 2-way manifold (No. 1000001426), set of
pressure hoses standard 5/16“ SAE, TUBE CUTTER 35 C (No. 070027C), MINICUT
pipe cutter (No. 070401C), thermometer, set of bending springs 3/8“ - 1/2“ - 5/8“,
reeling flaring tool (No. 222402), plastic case
Model kg
g No.
Tool set Climate I 2.3 170604

Tool set Climate II 2.4 170605
No. 170604
277
Nitrogen set
Multiple uses for refrigeration systems
Product profile
APPLICATION AREA
Ideal for split air-conditioning
Q Pressure and leak test with nitrogen
units and heat pumps!
Q Flushing of the installation
Q Nitrogen admission during soldering to prevent scale formation
950 cm3 nitrogen bottle

included
Complete set
Connection for large bottles
Any size of bottle can be

connected without a problem
Spring loaded
pressure reducing valve
Simple and safe handling

Fine scaled 1.0
pressure gauge
Precise reading of
the testing pressure
No. 259060
13 5/16“ SAE adaptor for

connecting to R410 units
Bottle adaptor for
connecting 950 cm3 bottles
Set (No. 259060) includes: pressure reducing valve, connection hose, bottle adaptor,
pressure gauge, nitrogen bottle and plastic case
Model No.
Nitrogen set with bottle (950 cm3) 259060

Nitrogen bottle, each 950 cm3 6 259008
Filling hose with pressure gauge 259010
Connection 5/16“ SAE internal, 1/4“ SAE external 01700RD
278
ROLEAK Pro 1)
Electronic leak detection device for locating leaks in

refrigeration systems (3 g/a) R410A
R22 R134a R407C R404A R507A R32
Product profile
Q urable and highly sensitive sensor tip with a leak detection
D Leak status: LED display
rate of 3 g/a within 3 seconds Sensor length: 40 cm
Q Suitable for R32 Leak detection rate: 3 g/a within 3 seconds
Q Simple determination of the refrigerant concentration Weight: 400 g
Q Adjustment of the sensor tips zero measurement point for Working temperature: 0 °C up to 40 °C
simple detection of the leak Voltage: 6 V (4 AA batteries included)
Q Reference leak for functionality test included
Q Easy accessibility of even hard to reach leaks
Audio signal
Comfortable use 40 cm long,

flexible sensor
Easy access
7 LEDs in hard-to-reach
places
Simple determination
of the refrigerant
concentrate with the
coloured shading
RESET - button
Adjusts to the sensor

tip zero point setting
for simple leak location
3 different sensitivity
levels
Exact and fast location

of the leak
13
No. 1500002241
Model No.
ROLEAK Pro 1500002241

in plastic case

1)

Evacuation
ROAIRVAC R32
1)
Two-stage vacuum pump

For evacuation in accordance with DIN 8975 with vacuum gauge
and solenoid valve
Product profile

n Solenoid check valve to protect the refrigeration system from
n Gauge-glass enables easy oil-stand monitoring
oil contamination during power outage
n Fast filling of oil without spilling, no special funnel is necessary
n
Vacuum gauge with integrated drag indicator enables simple Easy access to the oil drain plug makes emptying quick
n
and quick control of the evacuation process Thermal switch protects the unit from the motor overheating
n

n Protects the integrated components with the light and n Standard 1/4“ SAE connection as well as 5/16“ SAE and
high-quality casing 3/8“ SAE adaptor included in delivery
n Gas ballast valve for reduction of water vapour in the Removable cable prevents cable damage
n
oil container

n Special filter reduces oil mist on exhaust vent
Ergonomic handle
Light, compact and easy to

transport
Gas ballast valve
eduction of water vapour in

R
the oil container, guarantees Removable cable
higher evacuation power
and service life Prevents cable damage
Special filter
Integrated vacuum gauge
educes oil mist on
R
exhaust vent S imple and fast control of
the evacuation process
Integrated solenoid valve
P revents backwash of oil

into the refrigeration system
Four-pole motor*
Light and high-quality casing Increased torque and long service life
Protects the integrated components * (only with ROAIRVAC R32 1.5, 3.0
and 6.0)
13 1/4“ SAE standard connection with adaptors for Optimal positioned viewing glass and oil drains Practical: operating instructions always
5/16“ SAE and 3/8“ SAE for simple draining of the oil within view
1)
Evacuation
ROAIRVAC R32 Series
Two-stage rotary vane pump for evacuation
in accordance with DIN 8975
Type ROAIRVAC R32 1.5 ROAIRVAC R32 3.0 ROAIRVAC R32 6.0 ROAIRVAC R32 9.0
No. 1000002399 1000002713 1000001231 1000002714
Pumprating 1.5 CFM / 42 l / min / 3.0 CFM / 85 l / min / 6.0 CFM / 170 l / min / 9.0 CFM / 255 l / min /
2.5 m3/ h 5.1 m3/ h 10.2 m3/ h 15.3 m3/ h
Vacuum stages 2 2 2 2
Final vacuum 15 micron / 0.02 mbar 15 micron / 0.02 mbar 15 micron / 0.02 mbar 15 micron / 0.02 mbar
Motor rating 190 W / 1720 r/m 250 W / 1720 r/m 550 W / 1720 r/m 750 W / 3440 r/m
Voltage 230 V 230 V 230 V 230 V
Frequency 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz 50 Hz / 60 Hz
Connection 1/4” 1/4” 1/4” 1/4”
with adaptor 5/16” SAE M / 3/8” SAE M 5/16” SAE M / 3/8” SAE M 5/16” SAE M/ 3/8” SAE M 5/16” SAE M / 3/8” SAE M
Oil capacity 250 ml 330 ml 580 ml 590 ml
Weight 10.1 kg 11.9 kg 17.3 kg 18.4 kg
Manifold Ø 45 mm 50 mm 80 mm 80 mm
oduct for the

Future-proof pr ants
of R32 refriger
increased use
ROAIRVAC R32 1.5 (42 l/min) ROAIRVAC R32 3.0 (85 l/min) ROAIRVAC R32 9.0 (255 l/min)
Mineral oil is included in all

pump deliveries ROAIRVAC R32 6.0 (170 l/min) ROAIRVAC R32 1.5 - vacuum pump in use with the digital manifold ROCOOL 600
13
Scope of delivery ROAIRVAC: vacuum pump with 1/4“, 5/16“ SAE and 3/8“ SAE
connections, plastic bottle with mineral oil
Model Performance kg g No.
ROAIRVAC R32 1.5 42 l/min 10.1 1000002399

ROAIRVAC R32 3.0 85 l/min 11.9 1000002713
ROAIRVAC R32 6.0 170 l/min 17.5 1000001231
ROAIRVAC R32 9.0 255 l/min 18.4 1000002714
Mineral oil 1 litre 169200
281
ROREC 1)
Refrigerant recovery device

Compact, portable device for recovery and recycling refrigerants
of all kinds
Product profile
Q 4-pole motor guarantees the durability of the machine Suitable for: all refrigerants of the type CFC-HCFC-HFC
Q Low noise and vibration emission thanks to the compact design Capacity: gaseous: 0.26 kg / min
Q Intuitive handling makes it simple and safe to use fluid: 1.85 kg / min
Q Maintenance-free operation through the oil-free compressor push/pull: 6.22 kg / min
Q Emptying of the device in order to work with different Electrical data: 230 V / 50 - 60Hz
refrigerants with the PURGE function Power: 370 W
Q Simple transport and use with the light and compact High pressure switch: 38.5 bar
plastic casing
Weight: 17 kg
Ideal for mono and multi-split

Oil-free compressor
air-conditioning units and heat pumps!
Maintenance-free operation
Integrated high pressure switch
Protects the integrated

components
PURGE function
E mptying of refrigerant residue Thermal switch

in the unit (self-cleaning mode)
Protects the unit from
overheating
Simple use
Controlled dosage of the L ight and compact

refrigerant supply plastic casing
Simple transport and use
RESET Button
eset of the
R
pressure shut-off
4-pole motor
Increased torque and

Removable cable service life
Prevents cable damage
Recovery of refrigerant
Exemplary: Simple and precise reading with the Practical storage compartment
Outdoor air-conditioning unit glycol filled pressure gauge for accessories on the back
Low
13
High
Low High
Model Connected Load kg
g No.
ROREC ROREC 370 W 17.0 168605

Filter 0.12 168713
Filter
1)
ROREC PRO Digital 1)
Refrigerant recovery device

Lightweight recovery unit for the recovery of refrigerants of the
classes A1, A2L and A2 (incl. R32), suitable for all unit sizes thanks
to its high recovery rate.
Product profile
Q Suitable for refrigerants of the classes A1, A2L and A2 (incl. R32) Recovery rate: gaseous: 0.5 kg / min; 30 kg / h
Q Compact design with a weight of less than 12 kg fluid: 3.5 kg / min; 210 kg / h
Q Digital display and one-knob control push/pull: 9.5 kg / min; 570 kg / h
Q Maintenance free operation with the oil-free 2-piston Power supply: 230 V / 50 - 60 Hz
compressor Power: 730 W
Q 4-pole motor guarantees the durability of the machine High pressure switch: 38.5 bar
Q Automatic shut-off and automatic restart once the Product dimensions: 380 x 250 x 350 mm
pressure increases again Weight: 12 kg
Q Emptying of refrigerant residues with the PURGE function
Digital display
Clearly structured display of

the measured pressure values
Low pressure switch
Automatic shut-off and automatic

restart once the pressure increases
again
Oil-free 2-piston compressor
Very high recovery rate with

maintenance free operation
Shoulder strap for transport over

longer distances Clearly structured digital display
Practical storage compartment
Storage of accessories in the back

13
Model kg
g No.
ROREC PRO Digital 12.0 1500002637

Filter 0.12 168713

1)

Refrigerant for air-conditioning units F-GASE
EU 842/
Non-chlorinated refrigerant of the HFC group in practical 40 bar 2006
ER
steel bottles (bursting pressure: 165 bar) TÜV seal No. 0036-043/03D
G
O RDNUN
V
and TPED accepted as per 99/36/CE
Product profile
KEY FEATURES
Q Light and practical for use on building-sites
Q 1 and 2 litre steel bottles, rent-free and easy disposal
Q Flat base for increased standing stability
Q Ease of clean up after removing of the valve
Standardised SAE thread

Refillable bottles on all bottle valves
Full flexibility for the user Universal application
13
Model No.
R407C Refrigerant R407C in cardboard packaging

1 l steel bottle 1/4” SAE, 850 g 6 170913
2 l steel bottle 1/4” SAE, 1,700 g 4 170931
R410A Refrigerant R410A in cardboard packaging
R32 Refrigerant R32 in cardboard packaging
284
ROSCALE 120 1)
Electronic refrigerant scale

Precise, easy to handle refrigerant scale for filling and evacuation
processes with a maximal weight capacity of 120 kg
Product profile
Q Resolution of 5 g enables very precise filling Weight capacity: 120 kg or 264 lbs
Q Weight capacity sufficient for all common refrigerant bottles Accuracy: +/- 0.5%
Q Cable connection enables comfortable use in every situation Resolution: 5 g / 0.2 oz.
Q Bottle adaptor for connecting small refrigerant bottles Working temperature: -10° C up to +49° C / 14 up to +120º F
(1 l and 2 l bottles) Connection: 1/4“ SAE for 1 - 2 lit. bottles
Q Refrigerant bottles of all sizes have enough space Battery: 9V
Q Large LCD display for comfortable reading of the result Platform size: 230 x 230 x 53 mm
Q Simple use Weight: 3.28 kg
1/4“ SAE bottle adaptor
For connecting small

1 l and 2 l refrigerant bottles
Large rubberised weighing platform
All sizes of refrigerant bottles have

enough space
Large LCD display
For comfortable reading

of the results
Three operating keys
Simple use
Cable connection
Enables comfortable use

in every situation
Weight capacity of 120 kg
Weight capacity is sufficient for all

common refrigerant bottles
13
Set (No. R17300416) includes: ROSCALE 120, 9 V battery, carrying case
Model
kg g No.
ROSCALE 120 3.28 R17300416

ROSCALE 120 in carrying case

1)

Accessories
SANIFRESH
Deodorising cleaning spray
Product profile
KEY FEATURES
Q emoves the threat of disease and allergies – practical and
R
ecologically friendly solution for removing mites, dust, bacteria
and spores
Q Spray is applied directly to affected surface
Q Economical spray can with spray nozzle and spray tube
Q Removes unpleasant odours. Pleasant mint smell
Model Volume No.
Sanifresh (contains 12 bottles) 1 400 ml 85800
Bottle connection and adaptors

For refrigerant bottles
For use with new refrigerant bottles on existing equipment Model No.
Adaptor, 1/4“ connection 173205

Adaptor, 5/16“ connection 173204
Adaptor, W21.8 x 1/4“ SAE M connection 170950
with seal for 2 l sized bottles
Adaptor W21,8 LEFT x 1/4“ SAE M connection 1500003381
for combustible refrigerants like R32
No. 170950, No. 1500003381 Adaptor 1/2“ LEFT - 5/16“ SAE M connection 173206
Adaptor, 1/4” SAE M - 3/8” SAE F connection 89501
Adaptor, 3/8” SAE M - 1/4” SAE F connection 89503
No. 173204, No. 173205 Adaptor, 1/4” SAE F - 5/16” SAE M connection 170016
Adaptor, 1/4” SAE M - 5/16” SAE F connection 01700RD
No. 01700RD with valve trigger
Torque wrench set

Set with adjustable torque wrench (10 - 70 Nm) and 6 spanner
inserts sizes 17, 22, 24, 26, 27 and 29 mm for flange
connections on 1/4“, 3/8“, 1/2“ and 5/8“ pipe lines according to
DIN EN 378-2 : 2012-08
Fix with torque
urgently necessary!
7-piece set (No. 175001) includes: spanner wrench sizes 17, 22, 24, 26, 27, 29 mm,
Ø Spanner width Locking torque

13
1/4” / 6 mm 17 mm 14 -18 Nm
3/8” / 10 mm 22 mm 33-42 Nm
1/2” / 12 mm 24 mm 50-62 Nm
1/2” / 12 mm 26 mm 50-62 Nm
5/8” / 15/16 mm 27 mm 63-77 Nm
5/8” / 15/16 mm 29 mm 63-77 Nm
Model kg g No.
Torque wrench set, 7 pcs. 1.7 175001
286
Accessories
Adjustable wrench
Chrome vanadium steel, drop forged, chrome-plated
and polished
Product profile
KEY FEATURES
Q Preciseoperation: smooth-running and robust roller with
minimum play in the sliding guides
Size Clamping width

inch mm up to mm kg g No.
6” 160 20 100 70441

8” 210 25 220 70442
10” 250 29 390 70443
12” 300 34 660 70444
15” 380 44 1,170 70445
Schrader valve tool
Product profile
KEY FEATURES
Q F or exchanging the Schrader valve on air-conditioners under
pressure, without having to recover the unit
Q For safe and easy change of spring insert of the Schrader
valve tool
Q With safety thread for risk-free use with R410A
Model No.
Schrader valve tool in plastic carrying case 87800
Plate fin comb
Product profile
KEY FEATURES
Q For straightening the plate fins of heat-exchangers 13
Q 6 different sizes in one tool
Model Product dimensions No.
Plate fin comb 8 - 9 - 10 - 12 - 14 - 15 fins per inch 224500
287
General instructions for the use of refrigerants
Refrigerant data from CFC-alternative refrigerants
Refrigerant Composition ODP GWP Temperature glide
R22 (HFCKW refrigerant) CHCLF2 0.05 1,810 –
R134a (HFKW-chlorine-free refrigerant) CF3CH2F 0 1,430 –
R32 (HFKW-chlorine-free refrigerant) CH2F2 0 675 –
R404A (HFKW-chlorine-free blends) 52% R143a, 44% R125, 4% R134a 0 3,922 –
R507 (HFKW-chlorine-free blends) 50% R143a, 50% R125 0 3,985 –
R407C (HFKW-chlorine-free blends) 23% R32, 25% R125, 52% R134a 0 1,774 7.5K
R410A (HFKW-chlorine-free blends) 50% R32, 50% R125 0 2,088 0.2K
ODP = Ozone Depletion Potential (degree in which the ozone layer is destroyed)
GWP = Global Warming Potential (degree in which it contributes to the greenhouse effect)
Instructions for safe and proper use of the refrigerants:

Refrigerant:
n Wear protective gloves and safety goggles n Do not smoke around refrigerant
n Do not let refrigerant come in contact with skin n Working place / room must be thoroughly aired,
n D
o not inhale high concentrations of vapours if necessary extracted
(Lack of oxygen causes a narcotic effect and is a danger to life)
Refrigerant bottles:
n Secure against accidents, do not throw n Do not disassemble or remove valves

n Do not expose to direct sunlight and do not place near radiators
n Damaged bottles need to be properly returned
or other heat sources n Close empty containers
n Do not use open flame
Air-conditioners:
n Air-conditioner leaks need to be repaired immediately n In high concentrations (for example pipe burst), leave the room

n Do not allow refrigerant to leak while filling or doing

and do not enter again until it has been properly ventilated
maintenance work n Only do brazing work together with protective nitrogen gas
and only in well ventilated areas
Flare connections
Normal flare size in accordance with JIS B8607:2008
Flare outer diameter in relationship to the pipe diameter
Pipe outer diameter Metric Wall thickness Flare outer diameter with Flare outer diameter with
mm / inch mm / inch R22-, R134a-, R404-, R407C R410A air-conditioners
air-conditioners
6 mm – 1 mm 8.5 mm 9.1 mm
13 8 mm – 1 mm 11.1 mm 11.1 mm
10 mm – 1 mm 13.6 mm 13.2 mm
12 mm – 1 mm 15.3 mm 16.5 mm
16 mm – 1 mm 19.5 mm 19.2 mm
18 mm – 1 mm 22.0 mm 22.7 mm
1/4” 6.35 mm 0.35” 9.0 mm 9.1 mm
5/16” 7.94 mm 0.35” 11.0 mm 11.1 mm
3/8” 9.52 mm 0.35” 13.0 mm 13.2 mm
1/2” 12.70 mm 0.35” 16.2 mm 16.6 mm
5/8” 15.88 mm 0.35” 19.4 mm 19.7 mm
3/4” 19.05 mm 0.35” 23.3 mm 24.0 mm
288
Conversion table pressure, temperature
Conversion table pressure
mbar Micron TORR mm HG Vakuum
10 7,516 7.5 752
5 3,759 3.6 756
2 1,503 1.5 758
1 752 0.75 759
0.5 376 0.36
0.4 300 0.30
0.3 225 0.23
0.2 150 0.15
0.1 75 0.08
0.09 68
0.07 53
0.06 45
0.05 38
0.04 30
0.03 22
0.02 15
0.01 8
Conversion table temperature

Conversion from °C in °F: °C x 1,8 + 32 = °F
Conversion from °F in °C: (°F-32) : 1,8 = °C
°C °F °C °F °F °C °F °C
100 212 30 86 212 100 70 21
95 203 25 77 200 93 60 16
90 194 20 68 190 88 50 10
85 185 15 59 180 82 40 4
80 176 10 50 170 77 30 -1
75 167 4 39 160 71 20 -7
70 158 0 32 150 66 10 -12
65 149 -10 14 140 60 0 -18
60 140 -20 -4 130 54 -10 -23
55 131 -30 -22 120 49 -20 -29
50 122 -40 -40 110 43 -30 -34
45 113 -50 -58 100 38 -40 -40
40 104 -60 -76 90 32 -50 -46
35 95 -273 -460 80 27 -60 -51
-112 -80
-460 -273
Common threads
UNF-Thread SAE-Thread Outer diameter Internal diameter Lodes per inch Increment
(max. mm) (min mm) (mm)
7/16” - 20 1/4” 11.079 9.738 20 1.270
1/2” - 20 5/16” 12.667 11.328 20 1.270 13
5/8” - 18 3/8” 15.839 14.348 18 1.411
3/4” - 16 1/2” 19.012 17.330 16 1.588
7/8” - 14 – 22.184 20.262 14 1.814
7/8” - 14 5/8” 22.184 20.262 14 1.814
1” - 14 3/4” 25.357 23.437 14 1.814
11/16” - 14 – 26.947 25.024 14 1.814
11/8” - 12 – 28.529 26.284 12 2.117
11/4” - 12 7/8” 31.704 29.459 12 2.117
13/8” - 12 – 34.877 32.634 12 2.117
11/2” - 12 1” 38.052 35.809 12 2.117
289
14
* Detailed guarantee terms at https://rothenberger.com/gb-en/5-year-replacement-warranty
290
(Only in participating countries)
EXCHANGE
GUARANTEE
*
General purpose tools
Pliers
Water pump pliers 296 - 299
Pliers sets 300
Corner pipe wrenches 301
One-handed pipe wrenches, chain pipe wrenches 302 - 303
Grip pliers, strap and fittings wrenches 304 - 305
Installation wrenches
UNI stepped key set 306
Sanitary four way 306
Valve key 307
Open-ended, hinged ratchet wrenches 307 - 309
Screwdrivers 310 - 311
Installation aids
Spirit levels, cartridge extractor sets 312
Tap reseating tool 313
Spirit levels, measuring tape 313
Metal crimping, combination and electrical pliers 314 - 315
Screw extraction 318
Cordless drill driver 316
Drill bits 317 - 320, 324
Cordless impact wrench 320
Cordless angle grinder 321
Cutting and grinding discs, chisels 322
Cordless rotary hammer 323
Cordless LED lamp 324
CAS battery packs and charger 325
Hammers, chisels, punchs 326
Vices 327
Workbenches 328
General aids and tool bags 329 - 330
Case system 331 - 333
14
291
System overview
ROGRIP pliers
ROGRIP ROGRIP ROGRIP ROGRIP ROGRIP ROGRIP
M 7” 1K M 7” 2K M 10” 1K M 10” 2K F 7” 1K F 7” 2K
Working range: Ø 43 mm (1.1/4”) Ø 43 mm (1.1/4”) Ø 60 mm (2”) Ø 60 mm (2”) Ø 43 mm (1.1/4”) Ø 43 mm (1.1/4”)
Length: 185 mm (7”) 185 mm (7”) 254 mm (10”) 254 mm (10”) 185 mm (7”) 185 mm (7”)
Weight: 245 g 255 g 490 g 490 g 215 g 227 g
Material: Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel
Page 296 296 296 296 296 296
ROGRIP pliers Water pump pliers

ROGRIP ROGRIP ROGRIP XL Wapu Wapu Wapu
F 10” 1K F 10” 2K type SP 7” type SP 10” type SP 12”
Working range: Ø 60 mm (2”) Ø 60 mm (2”) Ø 102 mm (3.1/2”) Ø 34 mm (1”) Ø 43 mm (1.1/4”) Ø 48 mm (1.1/2”)
Length: 254 mm (10”) 254 mm (10”) 440 mm (16”) 175 mm (7”) 250 mm (10”) 300 mm (12”)
Weight: 470 g 480 g 1.4 kg 150 g 290 g 460 g
Material: Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel
Page 296 296 297 298 298 298
Water pump pliers Corner pipe wrenches 45°

Wapu Wapu Wapu Corner pipe wrench Corner pipe wrench
type SPK 7” type SPK 10” type SPK 12” 45 ° Super S, 10” 45 ° Super S, 12”
Working range: Ø 34 mm (1”) Ø 43 mm (1.1/4”) Ø 48 mm (1.1/2”) Ø 22 mm (1/2”) Ø 34 mm (1”)

14
Length: 175 mm (7”) 250 mm (10”) 300 mm (12”) 250 mm (10”) 300 mm (12”)
Weight: 165 g 315 g 475 g 400 g 810 g
Material: Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel Chrome vanadium steel
Page 299 299 299 301 301
292
System overview
Corner pipe wrenches 45°

Corner pipe wrench Corner pipe wrench Corner pipe wrench Corner pipe wrench Corner pipe wrench
45° Super S, 16” 45° Super S, 20” 45° Super S, 24” 45°, 10” 45°, 12”
Working range: Ø 48 mm (1.1/2”) Ø 60 mm (2”) Ø 89 mm (3”) Ø 22 mm (1/2”) Ø 34 mm (1”)
Weight: 1.44 kg 2.44 kg 3.4 kg 370 g 740 g
Page 301 301 301 301 301
Corner pipe wrenches 45° Pipe wrenches 90°

Corner pipe wrench Corner pipe wrench Pipe wrench 90° Pipe wrench 90° Pipe wrench 90°
45 °, 16” 45 °, 20” 12” 16” 20”
Working range: Ø 48 mm (1.1/2”) Ø 60 mm (2”) Ø 34 mm (1”) Ø 48 mm (1.1/2”) Ø 60 mm (2”)
Weight: 1.34 kg 2.4 kg 740 g 1.34 kg 2.4 kg
Page 301 301 301 301 301
Pipe wrenches 90° One-handed pipe wrenches HEAVY DUTY

Pipe wrench 90° Pipe wrench 90° HEAVY DUTY 6” HEAVY DUTY 8” HEAVY DUTY 10”
24” 36”
Working range: Ø 89 mm (3”) Ø 114 mm (4”) Ø 22 mm (1/2”) Ø 32 mm (1“) Ø 48 mm (1.1/2”)

14
Weight: 3.4 kg 5.6 kg 250 g 400 g 780 g
Page 301 301 302 302 302
293
System overview
One-handed pipe wrench HEAVY DUTY

HEAVY DUTY 12” HEAVY DUTY 14” HEAVY DUTY 18” HEAVY DUTY 24” HEAVY DUTY 36”
Working range: Ø 60 mm (2”) Ø 60 mm (2”) Ø 73 mm (2.1/2”) Ø 89 mm (3”) Ø 141 mm (5”)
Weight: 1.25 kg 1.68 kg 2.67 kg 4.32 kg 7.5 kg
Page 302 302 302 302 302
One-handed pipe wrench HEAVY DUTY One-handed pipe wrench ALUDUR

HEAVY DUTY 48” HEAVY DUTY 60” ALUDUR 10” ALUDUR 14” ALUDUR 18”
Working range: Ø 168 mm (6”) Ø 203 mm (8”) Ø 48 mm (1.1/2”) Ø 60 mm (2”) Ø 73 mm (2.1/2”)
Length: 1,200 mm (48”) 1,300 mm (60”) 250 mm (10”) 350 mm (14”) 450 mm (18”)
Weight: 15.8 kg 24 kg 480 g 990 g 1.63 kg
Material: Chrome vanadium steel Chrome vanadium steel Aluminium Aluminium Aluminium
Page 302 302 302 302 302
One-handed pipe wrench ALUDUR Pliers wrench

ALUDUR 24” ALUDUR 36” ALUDUR 48” ALUDUR 60” ROFAST
Working range: Ø 89 mm (3”) Ø 141 mm (5”) Ø 168 mm (6”) Ø 200 mm (8”) Ø 50 mm (1.7/8”)
14 Length: 600 mm (24”) 900 mm (36”) 1,200 mm (48”) 1,300 mm (60”) 254 mm (10”)
Weight: 2.51 kg 5 kg 8.42 kg 14.6 kg 580 g
Material: Aluminium Aluminium Aluminium Aluminium Chrome vanadium steel
Page 302 302 302 302 304
294
System overview
One-handed pipe wrench STILLSON

STILLSON 8” STILLSON 10” STILLSON 12” STILLSON 14” STILLSON 18”
Working range: Ø 27 mm (3/4”) Ø 34 mm (1”) Ø 43 mm (1.1/4”) Ø 48 mm (1.1/2”) Ø 60 mm (2”)
Weight: 280 g 590 g 715 g 1.04 kg 1.74 kg
Material: Steel, drop forged Steel, drop forged Steel, drop forged Steel, drop forged Steel, drop forged
Page 302 302 302 302 302
One-handed pipe wrench STILLSON ROCASE case system

STILLSON 24” STILLSON 36” ROCASE ROBOX
Working range: Ø 73 mm (2.1/2”) Ø 102 mm (3.1/2”) Sizes: 5 2
Length: 600 mm (24”) 900 mm (36”) Volume: 5.7 until 48.2 l 0.65 until 1.37 l
Weight: 3.08 kg 5.69 kg Weight: 0.63 until 2.64 kg 0.09 until 0.17 kg
Material: Steel, drop forged Steel, drop forged Material: ABS plastic ABS plastic
Page 302 302 331 332
Power tools
RO DD60 RO ID400 RO AG8000 RO RH4000 RO FL180
Voltage: 18 V Voltage: 18 V Voltage: 18 V Voltage: 18 V Max. lumin. flux: 410 lm
Max. torque soft: 34 Nm Max. torque: 400 Nm Grinding wheel Ø: Max. single blow energy Max. operation time
125 mm (EPTA): 2.2 J per battery load:
Max. torque hard: 60 Nm Max.
18 V/2.0 Ah: 4.5 Std.
impact rate: 4,250 /min. Idle frequency: Max.
18 V/4.0 Ah: 9.1 Std.
14
Drill-Ø steel: 13 mm
8,000 /min. impact rate: 4,000 /min.
Bit retainer:
Drill-Ø soft wood: 38 mm Weight: 0.46 kg
Male square1/2” Drill-Ø concret: 24 mm
No-load speed: (12.7 mm)
Bit retainer:
0 - 450 / 0 - 1,600 /min
Speed/torque levels: 12 SDS-plus
316 320 321 323 324
295
Pliers
ROGRIP M Double hardened jaws
extremely durable
Quickly adjustable water pump pliers Good grip on every surface
KEY FEATURES even at highest demands
Durable:
Q Due to double hardening, the teeth are particularly
wear-resistant
Q Slip-resistant: The shape of the teeth (self-locking), the 3-touch- ROTHENBERGER
point grip on the pipe and the soft-touch handle, prevent Curve-Shape-Design
slipping of the pliers Especially suitable for larger pipe
Q Large gripping capacity: 30% more gripping capacity*: diameters. Reduces the danger
10“ pliers up to 2“ pipe diameters of fingers getting clamped
Large gripping capacity

TECHNICAL DATA
Reliable grip and hold
Q hrome vanadium steel tempered, drop forged with
C
up to 2“ pipe diameter
heavy-duty box joint
Q Polished head and joint
Q Double hardened jaws, extremely durable New handle design
Good grip with two

handle versions
Wide handles
More comfort and better

Model Working range No. power transmission
ROGRIP M 7” 1K 1.1/4” 6 1000002697

ROGRIP M 7” 2K 1.1/4” 6 1000002698
ROGRIP M 10” 1K 2” 6 1000002699 ROTHENBERGER Curve-Shape-Design –
ROGRIP M 10” 2K 2” 6 1000002700 7" pliers grip like 10“ pliers!
ROGRIP F
Quickly adjustable water pump pliers
KEY FEATURES Double hardened jaws
extremely durable
Durable:
Q Due to double hardening, the teeth are particularly
Good grip on every surface
wear-resistant
even at highest demands Safety lock system
Q Slip-resistant: The shape of the teeth (self-locking), the 3-touch-
point grip on the pipe and the soft-touch handle, prevent Prevents unintentional
slipping of the pliers ROTHENBERGER opening and enables
Q Large gripping capacity: 30% more gripping capacity*: Curve-Shape-Design a 50% quicker adjustment
10“ pliers up to 2“ pipe diameters Especially suitable for larger
Q Safety lock system: prevents unintentional opening and enables pipe diameters. Reduces the
a 50% quicker adjustment danger of fingers getting clamped
3-point grip over the Large gripping capacity

middle for reliable clam-
Curve-Shape-Design: ping. Perfect grip on Reliable grip and hold up to 2“
especially ergonomic pipes up to Ø 2“ pipe diameter
New handle design
Good grip with two

handle versions
14 Wide handles

Model Working range No.
power transmission
ROGRIP F 7” 1K 1.1/4” 6 1000002701
ROGRIP F 7” 2K 1.1/4” 6 1000002702
ROTHENBERGER Curve-Shape-Design –
ROGRIP F 10” 1K 2” 6 1000002704
ROGRIP F 10” 2K 2” 6 1000002705 7" pliers grip like 10“ pliers!
* than previous model
296
Pliers
ROGRIP XL
Quickly adjustable water pump pliers
Q 6“ pliers up to 3.1/2“ pipe diameters
1 Q hrome vanadium steel tempered, drop forged with
C
Q 3-point grip: reliable clamping and perfect grip up to the heavy-duty box joint
maximal pipe diameter Q Polished head and joint
Q ROTHENBERGER Curve-Shape-Design: especially ergonomic Q Double hardened jaws, extremely durable
by large pipe diameters. Reduces the danger of fingers
getting clamped
Q Wide handle for more comfort and better transmission of power
3.1/2“ –
14 point size adjustment ping width of
Enourmos grip
Q
on
uring applicati
reliable grip d
Double hardened jaws

extremely durable Large gripping width
Good grip on every surface Reliable grip and hold up to 3.1/2“

even for hardest demands pipe diameter
ROTHENBERGER
Curve-Shape-Design
Especially ergonomic with larger

pipe diameters. Reduces the
danger of fingers getting clamped
14 adjustable positions
Variable uses, lateral stability

and high strength
Slip-resistant
plastic handles
High grip reliability
Wide handles

power transmission
3-point grip over the
middle for reliable
Curve-Shape-Design: clamping. Perfect grip on
especially ergonomic pipes up to Ø 3.1/2“
ROTHENBERGER Curve-Shape-Design –
especially ergonomic!
14
inch mm max. inch max. kg

mm g No.
16” 440 3.1/2” 102 1,400 1000000328
297
Pliers
Water pump pliers SP
Complies with DIN 5231 D, with heavy-duty box joint,
chrome vanadium steel, drop forged, tempered,
polished head and joint
Product profile
n Ideal for hard-to-reach places with the longer, thinner pliers n omplies with DIN 5231 D
C
head with measurements favourable for corners n Heavy-duty box-joint
n Optimum grip for reliable hold of pipes, flat objects, squared n Abrasion-resistant surface protection with the
and hexagonal screws epoxy-powder coating
n Long service life through induction hardened teeth n Chrome vanadium steel
n Variable use: 7 size settings n Drop forged, tempered
n Non-slip even on smooth surfaces n Polished head and joint
n Safe use with the crush and pinch protection
Asymmetrical gripping surface

Self-clamping jaws
Optimum grip with the rhombus-shaped Measurements
gripping surface favourable for corners Non-slip even on
smooth pipes
Ideal for hard-to-reach
places
Ergonomically shaped
anti-slip legs
Induction hardened teeth
Reliable hold
Long service life and high wear
resistance
7 size settings (10“ and 12“),

solid and durable
Variable use
Crush and clamp guard
Optimum grip Safe use
No. 70527
No. 070528D
14
mm g No. No. 70528
7” 175 1” 34 150 6 70527

10” 250 1.1/4” 43 290 6 70528
12” 300 1.1/2” 48 460 6 70529
10” Counter display (12 pcs.) 070528D
No. 70529
298
Pliers
Water pump pliers type SPK
KEY FEATURES
Q Features similar to type SP, additionally with plastic covered
handles
Increased safety:
Plastic covered handles!

mm g No.
7” 175 1” 34 165 6 70521

10” 250 1.1/4” 43 315 6 70522
12” 300 1.1/2” 48 475 6 70523
10” Counter display (12 pcs.) 070522D
Grooved water pump pliers CL

Chrome vanadium steel, chrome-plated, drop forged, tempered,
polished head and sliding joint, even jaws, in compliance
with DIN 5231 E
KEY FEATURES
Q No slipping of the joint possible
Q Absolutely firm fit in every open position
Q Easy, smooth adjustment
Q Induction hardened teeth for a long service life
Q Crush and clamp guard prevent injuries
Q Plastic covered handles
14

mm g No.
9.1/2” 245 1.1/2” 48 330 1 70591

12” 300 2” 60 560 1 70592
16” 420 4” 114 1,150 1 70593
299
Pliers sets
ROBOX pliers sets
3-part pliers sets for holding and
No. 1000002188
turning of diverse types of pipes
3-part set (No. 1000002188) includes:

corner pipe wrench 45°, SUPER S, 1“ (No. 070122X), ROGRIP M 10“ 1K (No. 1000002699),
ROGRIP M 7“ 1K (1000002697), ROBOX B2650 (No. 1000002763)

one-handed pipe wrench ALUDUR, 14“ (No. 70160), ROGRIP M 10“ (No. 100002699),
ROGRIP M 7“ 1K (1000002697), ROBOX B2650 (No. 1000002763)
For the individual pliers see 296 - 305
Model
kg g No.
No. 1000002189
Pliers set w/ corner pipe wrench, ROBOX (3 pcs.) 1.6 1000002188*
Pliers set w/ ALUDUR, ROBOX (3 pcs.) 1.7 1000002189*
Professional sets
Practice-oriented set of pipe wrenches
and pipe cutter
3-part set (No. 070130X) includes: pipe wrench 1“ (No. 070122X),

pipe wrench 1.1/2“ (No. 070123X), pipe wrench 2“ (No. 070124X)

pipe wrench 1.1/2“ (No. 070123X), wapu SP 10” (No. 70528),
TUBE CUTTER 35 (No. 70027)

pipe wrench 1.1/2“ (No. 070123X), wapu SP 10” (No. 70528)
Model kg g No.
Set 1 - 1.1/2 - 2” 5.0 070130X

Set 2 - 1.1/2” + wapu SP 10” + TC35 3.1 070135X
Set 3 - 1.1/2” + wapu SP 10” 2.7 070140X No. 070130X No. 070135X No. 070140X
ROGRIP pliers sets

The quickly adjustable water pump pliers generation
ROGRIP is available as practice-oriented sets in
two different sizes.

ROGRIP M 7“ 1K (No. 1000002697),
ROGRIP M 10“ 1K (No. 1000002699)

ROGRIP M 7“ 1K (No. 1000002697),
14 ROGRIP M 10“ 1K (No. 1000002699),
ROGRIP XL 16” (No. 1000000328)
Model No.
ROGRIP set M 7” 1K + M 10” 1K 6 1000001039

ROGRIP set M 7” 1K + M 10” 1K + ROGRIP XL 1000001068 No.1000001039 No.1000001068
300
Pliers
Corner pipe wrench 45°, SUPER S
Chrome vanadium steel, drop forged, tempered, with reinforced
sleeve, polished jaws and a favourable size for corners KEY FEATURES
Q
Self-clamping: 3-point clamping ensures reliable and firm grip
even on smooth pipes
Q Reliable grip and non-slip with teeth set against turning
direction, induction hardened
Q Double-T profile jaws, ideal for clamping different material forms,
enables universal application
Inch mm Inch kg
mm g No. Inch mm Inch kg
mm g No.
1/2” 22 10” 250 400 6 070121X 2” 60 20” 540 2,440 1 070124X

1” 34 12” 300 810 070122X 3” 89 24” 640 3,400 1 70125
1.1/2” 48 16” 420 1,440 070123X
Corner pipe wrench 45°

Chrome vanadium steel, drop forged, tempered, with reinforced KEY FEATURES
sleeve, polished jaws and a favourable size for corners
Q Favourable size for corners
Q Thin muzzle with thin jaws, 45° angled
Inch mm Inch kg
mm g No.
1/2” 22 10” 250 370 070131X 1.1/2” 48 16” 420 1,340 070133X
1” 34 12” 300 740 070132X 2” 60 20” 540 2,400 070134X
Pipe wrench 90°

Chrome vanadium steel, drop forged, tempered, with reinforced KEY FEATURES
sleeve, polished jaws and a favourable size for corners
Q Favourable size for corners
Q Thin muzzle with thin jaws, 90° angled
14
Inch mm Inch kg
mm g No.
1” 34 12” 300 740 070110X 3” 89 24” 640 3,400 70113

1.1/2” 48 16” 420 1,340 070111X 4” 114 36” 750 5,600 70114
2” 60 20” 540 2,400 070112X
301
Pliers
One-handed pipe wrench
HEAVY DUTY
KEY FEATURES
Q One-handed ratchet-like use, self-clamping,
spring-supported hook
Q Quick preset of pipe-Ø using scale on hook
Q Wearing parts replaceable:
US-norm GGG-W-651
hook and heel jaw can be purchased separately type II class A
Q Monoblock cast body with high strength, double T profile, forged
jaw and hook, fine polished, teeth set against turning direction,
induction hardened, tempered and non-slip adjustment screw No. No. No.
Inch mm Inch mm kg g pliers hook jaws
6” 160 3/4” 26 0.25 1 70148 70199 70189

8” 200 1” 32 0.40 1 70150 70200 70190
10” 250 1.1/2” 48 0.78 1 70151 70201 70191
12” 300 2” 60 1.25 1 70152 70202 70192
2-part set (No. 1000002194) includes: one-handed pipe wrench 14” 350 2” 60 1.68 1 70153 70203 70193
HEAVY DUTY 6“ (No. 70148), ROBOX B2350 (No. 1500002641)
18” 450 2.1/2” 73 2.67 1 70154 70204 70194
24” 600 3” 89 4.32 1 70155 70205 70195
Model kg g No.
36” 900 5” 141 7.5 1 70156 70206 70196
48” 1,200 6” 168 15.80 1 70157 70207 70197
One-handed pipe wrench 0.33 1000002194*
60” 1,300 8” 203 24.00 1 70158 70208 70198
HEAVY DUTY 6”, ROBOX
One-handed pipe wrench ALUDUR

KEY FEATURES
Q Features similar to HEAVY DUTY
Q Weight savings of approx. 40%: extremely light,
high strength aluminium alloy
Q Wearing parts replaceable: hook and heel jaw can be
US-norm GGG-W-651
purchased separately
type I class B
No. No. No.

10” 250 1.1/2” 48 0.48 1 70159 70201 70191

14” 350 2” 60 0.99 1 70160 70203 70192
18” 450 2.1/2” 73 1.63 1 70161 70204 70194
24” 600 3” 89 2.51 1 70162 70205 70195
36” 900 5” 141 5.00 1 70163 70206 70196
48” 1,200 6” 168 8.42 1 70168 70207 70197
60” 1,300 8” 203 14.60 1 70169 70208 70198
One-handed pipe wrench STILLSON

KEY FEATURES
Q Hardened adjustment nut presses onto the handle during use
and prevents undesired readjustment
Q Optimised double-spring construction guarantees quick and US-norm GGG-W-651
firm self-clamping, ensuring secure hold even on smooth pipes type I class B
No. No.
Inch mm Inch mm kg pliers hook
14 g
8” 200 3/4” 27 0.28 1 70350 70374

10” 250 1” 34 0.59 1 70351 70375
12” 300 1.1/4” 43 0.72 1 70352 70376
14” 350 1.1/2” 48 1.04 1 70353 70377
18” 450 2” 60 1.74 1 70354 70378
24” 600 2.1/2” 73 3.08 1 70355 70379
36” 900 3.1/2” 102 5.69 1 70356 70380
302
Pliers
One-handed pipe wrench
OFFSET PATTERN HEAVY DUTY
KEY FEATURES
Q ffset wrench head is ideal for working in confined spaces
O
(e.g. near to the wall)
Q One-handed ratchet-like use, self-clamping,
spring-supported hook
Q Quick preset of pipe Ø using scale on hook
Q Wearing parts replaceable: hook and heel jaw can be
purchased separately
No. No. No.

10” 250 1.1/2” 48 750 1 70166 70201 70191

14” 350 2” 60 1,460 1 70167 70203 70192
One-handed corner pipe wrench 90°

KEY FEATURES
Q Weight savings of approx. 40%: extremely light, high strength
aluminium alloy
No. No. No.

Inch mm Inch mm kg
g pliers hook jaws
14” 350 2” 60 890 70115 70203 70192

18” 450 2.1/2” 73 1,490 70116 70204 70194
Chain pipe wrench 4“ R/L

KEY FEATURES
Q P rofile handle made of drop forged chrome vanadium steel,
polished head with hardened special tooth system, powerful
chain made of tempered special steel
Q Double-sided teeth surface set against the turning direction for
use in both directions without re-inserting

max. Inch max. mm Inch mmkg g No.
4” 115 12” 300 780 1 70235
Chain pipe wrench HEAVY DUTY

Very robust model for the toughest conditions, proven in pipeline
construction, jaws and handle are forged, jaws are replaceable
KEY FEATURES
Q Strong chain made of tempered special steel – fits every
cross-section
Q Double-sided tooth system for ratchet-like use, for right and
left-handed operation
jaws No. No.

max. Inch max. mm width mm mm kg gpliers jaws 14
Model kg g No.
1.1/2” 48 38 350 1.4 70242 70571
2.1/2” 73 52 690 3.5 70243 70572 Spare chain HEAVY DUTY 2.1/2” 0.95 70263
4” 114 63 940 6.7 70244 70573 Spare chain HEAVY DUTY 4” 1.40 70264
6” 168 78 1,120 12.6 70245 70574 Spare chain HEAVY DUTY 6” 2.80 70265
8” 220 80 1,280 17.2 70246 70575 Spare chain HEAVY DUTY 8” 3.40 70266
12” 324 84 1,630 24.2 70247 Spare chain HEAVY DUTY 12” 5.10 70267
303
Pliers
Fittings wrench 90°
Special chrome vanadium steel, steel forged
KEY FEATURES
Q P lastic jaws guarantee a secure and gentle grip especially for
chrome-plated fittings and polished surfaces
Q High-quality DURAMANT surface coating Plastic jaws, gentle grip!

1” 35 14” 356 740 1 70545

Plastic jaws 10 70548
Fitting key
Steel forged, burnished, smooth jaws for protection of fittings and
delicate or polished surfaces
No. 350900
Clamping width and depth

No. 350850 Model mm mm mm No.
kg g
Grid adjustment 260 75 45 690 350850

Roll adjustment 275 65 45 780 350900
ROFAST pliers wrench

For gripping, holding, clenching and bending of chrome-plated
fittings with delicate surfaces
KEY FEATURES
Q Gentle to surfaces: Smooth, parallel jaws enable use on
delicate surfaces
Q Versatile: Replaces spanner sets (0 - 50 mm or 0 - 1.7/8“) and
dispenses with use of other tools
Q Convenient handling: Excellent pressing and clamping force
with 10x force transfer for high gripping power

1.7/8” 50 10” 254 580 1500003170
SANIGRIP / SANIGRIP PL
Valve pliers PL
Special chrome vanadium steel, drop forged, chrome-plated,
4 adjustable sizes at joint, with toothed grip jaws. SANIGRIP PL
designed with plastic jaws to protect fittings
14 KEY FEATURES
Q Secure and gentle grip on valuable fittings without damaging
polished surfaces
Q Optimum grip is ideal for plastic screw joints up to Ø 62 mm kg g
(siphon) Model Inch mm max. mm min. mm No.
SANIGRIP 10” 250 80 14 270 70415

SANIGRIP PL 10” 250 62 14 280 70416
304
Pliers
Sealing grip pliers
Q Chrome vanadium steel, nickel-plated, tempered, hardened jaws
Q Ideal for climate, heating and sanitary installations
Q For clamping thin-walled copper pipes Ø 4 - 16 mm and hoses
Q With leverage and quick-release lever, adjustable and lockable
Jaw width
Inch mm mm kg g No.
10” 250 4 - 16 490 70250
Pipe welding grip pliers

Chrome vanadium steel, nickel-plated, hardened jaws
Q For safe, central clamping of pipes and round material aligned
during welding work
Q Reliable 3-point support, for steel pipes up to Ø 3“
Q U-shaped clamping jaws allow enough room for welding
Q With leverage and quick-release lever, adjustable and lockable
Jaw width
Inch mm mm kg g No.
11” 280 95 840 70257
EASYGRIP
Automatic strap wrench for plastic pipes
Ø 20 - 160 mm (3/4 - 6“)
The indispensable tool for socket welding large diameter plastic pipes
KEY FEATURES Centred prismatic support
Q No damage to pipe surface with the centred prismatic support No damage to the pipe surface
Q Secure grip with special non-slip nylon strap
Model mm Inch kg g No.

Non-slip special nylon strap
EASYGRIP 20 - 160 6” 1.0 55075 Secure grip

Spare strap EASYGRIP 0.1 55076
Strap and fittings wrench

Made of aluminium special alloy, with replaceable nylon strap
KEY FEATURES
Q S afe to use on chrome-plated fittings without damaging
polished surfaces
Q Use in the automotive industry (oil filter changes)
14

Inch mm Inch mm
kg g No.
3” 89 12” 300 280 70240

Spare strap 3“ 20 70268
8” 220 12” 300 290 70241
Spare strap 8“ 30 70269
305
UNI stepped key set
Radiator valve stepped key and ratchet set for installation and removal
of heating valve nipples, tank connectors and short tap extensions.
Chrome vanadium steel, hardened, nickelplated, square drive 1/2“
Product Profile
KEY FEATURES
Q niversally applicable: cam, internal hexagonal and 12-edged
U
driver, size 3/8 - 1/2 - 3/4 - 1“ and other sizes in between
No. 73298
Q No canting of nipples and screw connections with the special
stepped key design
Q Combination key allows installation and removal of heating
nipples, tank connections and short tap extensions
Q 1/2“ ratchet makes installations quick and easy
1/2“ ratchet No. 73280
Fast and easy installation
No. 27180
Model kg g No.
Set: UNI stepped key and ratchet 670 10 73297

UNI stepped key 120 73298
Gas stepped key 80 73280
1/2“ ratchet 440 27180
Sanitary four way key Sanitary four way key

Chrome vanadium special steel Chrome vanadium special steel
Q F our external hexagonal 3/8“, 1/2“, 3/4“, 1“ up to 100 mm and Multi-functional combined key:
installation / removal of heating valves and tank connectors n Four external hexagonal 3/8“, 1/2“, 3/4“, 1“ for short tap,
Q Three inner threads M8, M10 and M12 for hanger bolts extensions, installation and removal of heating valves and
tank connectors
n Three inner threads M8, M10 and M12 for hanger bolts
(wash basin fittings)
14
Dimensions Dimensions
Model mm kg g No. Model mm kg g No.
Sanitary four way key 220 x 220 610 351043 Sanitary four way key 220 x 220 590 351044
multifunctional multifunctional
306
RO-QUICK KEY FEATURES
Q Quick and problem-free use by the installation of bathtubs,
Valve key
basins and sinks
Release valve holder and key for eccentric
Q Can be used from the bottom up
and standard valves
Q With 2 facing, spring mounted locking cams, as well as
holder with T-handle
Q Adaptor with star handle for showers, bathtubs
(optional accessory)
Q Torque-proof immediately on insertion
No. 70414
No. 70413
No damage to
chrome-plated parts!
Model mmkg g No.
RO-QUICK set 70439

RO-QUICK valve key 120 300 70414
Adaptor 75 70 70413
ROCLICK
Combined open-ended / hinged ratchet wrench
Chrome vanadium steel, polished and high shine chrome-plated
KEY FEATURES
Q Moveable
Small operating
ring ratchet allows for use even in tight spaces
Q Precise work with the fine-running ratchet (72 teeth) radius of only 5°!
Fig. ROCLICK wrench set
Small 5° operating radius Adjustable inclination angle 14
7-part set (No. 70490) includes: ROCLICK combined spanner 8 - 10 - 11 - 13 - 14 - 17

- 19 mm, plastic case
Model kg
g No.
ROCLICK spanner set, 7 pcs. 1,150 1 70490
307
Torque wrench set
Set with adjustable torque wrench (10-70 Nm) and 6 spanner inserts Fix with torque
sizes 17, 22, 24, 26, 27 and 29 mm for flange connections urgently necessary!
on 1/4“, 3/8“, 1/2“ and 5/8“ pipe lines according to DIN EN 378-
2:2012-08
Ø Spanner width Locking torque
1/4” / 6 mm 17 mm 14-18 Nm
3/8” / 10 mm 22 mm 33-42 Nm
1/2” / 12 mm 24 mm 50-62 Nm
1/2” / 12 mm 26 mm 50-62 Nm
5/8” / 15/16 mm 27 mm 63-77 Nm
5/8” / 15/16 mm 29 mm 63-77 Nm
7-part set (No. 1750.01) includes: spanner wrench sizes 17 - 22 - 24 - 26 - 27 - 29 mm,

Model kg g
No.
Torque wrench set, 7 pcs. 3.5 175001
Ratchet spanner ROCLICK KEY FEATURES

Chrome vanadium, head black atramentized Q With the spring mechanism – the harder the pressure,
the more firmer the grip
Q Self-ratcheting effect when turning back
Q Fast extraction and loosening of screws
Q Suitable especially for screws on pipes,
cables and rods
Key width Key width

Model mm mmkg g No. Model mm mmkg g No.
Ratchet spanner ROCLICK 10 134 80 70420 Ratchet spanner ROCLICK 16 184 130 70424
Ring ratchet spanner KEY FEATURES

Chrome vanadium steel, drop forged, chrome-plated Q Ideal for hard-to-reach screws with the finely toothed
R/L switchable ratchet
Q 12-edged, flat offset, robust and indestructible
14

Model mm kg g No.
12 x 14 mm 230 200 1 70271

13 x 17 mm 250 280 1 70272
19 x 22 mm 310 440 1 70274
24 x 27 mm 360 700 1 70276
308
Adjustable wrench SWO adjustable wrench
Chrome vanadium steel, drop forged, chrome-plated and polished Chrome-vanadium steel, chrome-plated and polished finish
Q Preciseoperation: Smooth-running and robust roller with n Metric measuring scale on jaws for easy jaws pre-setting and
minimum play in the sliding guides s izing of nuts, bolts, pipes, etc.
n Great accessibility in confined spaces, non-protruding jaw
shank at maximum opening
Q Absolutely parallel jaw surfaces ensure perfect grip of nuts
and screws

Size up to Clamping widthkg g No.
6” 160 mm 20 mm 100 70441 Clamping width

8” 210 mm 25 mm 220 70442 Size up to up to mm (Inch)
kg g No.
10” 250 mm 29 mm 390 70443
12” 300 mm 34 mm 660 70444 6” 176 mm 34 (1.3/8”) 205 1500001509
15” 380 mm 44 mm 1,170 70445 8” 216 mm 39 (1.1/2”) 345 1500001510
One-handed type R Enormous leverage!

The ideal multi-function spanner with ratchet function – for almost
all bolt and nut applications up to a size of 42 mm (1.1/4“)
KEY FEATURES
Q S elf-clamping even on smooth pipes, bolts, shafts and broken
off head of hexagonal screws
14

kg
Clamping width Clamping width g No. kg
Clamping width Clamping width g No.
160 mm 6” SW 9 - 17 1/8 - 3/8” 80 70220 255 mm 10” SW 16 - 33 3/8 - 1” 340 70222

200 mm 8” SW 14 - 28 1/4 - 3/4” 200 70221 310 mm 12” SW 22 - 42 1/2 - 1.1/4” 520 70223
309
Screwdrivers
EUROLINE
Screwdrivers
Product profile
KEY FEATURES CHARACTERISTICS
Q High force transmission with 2 component handle Q Blade made of chrome vanadium steel with high torque and
Q High torque hardness, matt chrome-plated
Q Guarantees perfect seat on screw head Q Hardened, burnished tip with high durability for reliable force
Q Color coding for different tips enables quick differentiation transmission even for tightly secured screws
Q Oil, fat and hydrocarbon resistant Q Guaranteed perfect seat on screw head, long service life even
with long term use
Q Handle made of high-quality plastic, grip-friendly AS knob form
2 component handle made of

Surface treated Color coding for high-quality, plastic, grip-friendly
precision tip different tips AS knob form
Guarantees perfect seat Quick differentiation High force transmission

on screw head
Blade made of high-quality,

tempered chrome vanadium steel
High torque proof
Sets include: Pozidriv Phillips

No. 73571 No. 73570
3.5 x 75 mm 3.5 x 75 mm
14
Screwdrivers sets 4 x 100 mm
5.5 x 125 mm
4 x 100 mm
5.5 x 125 mm
6.5 x 150 mm 4 x 100 mm
Model No. PZ 1 x 100 mm
kg g
PZ 2 x 125 mm
Screwdriver set Pozidriv 0.70 73571 PH 1 x 100 mm
Screwdriver set Phillips 0.70 73570 PH 2 x 125 mm
310
Screwdrivers
Chisel screwdriver set
EUROLINE IMPAKT
Screwdriver with continuous, strengthened blade
Product profile 5.5 x 100 mm
KEY FEATURES 6.5 x 125 mm
8 x 150 mm
Q ne-piece, strengthened blade with metal cap allows directed
O
PH 1 x 80 mm
hammer blows, for example loosening stuck screws
PH 2 x 100 mm
Color coding for Handle made of high-quality plastic,

2 tools in 1! different tips grip-friendly AS knob form
Quick differentiation High force transmission
Blade made of high-quality,

Surface treated precision tip tempered chrome vanadium steel
Guarantees perfect seat High torque proof

on screw head
Constant strenghtened blade with metal cap 5-part set (No. 73575) includes: slot screwdriver 55 x 100 (No. 73565), 6.5 x 125
(No. 73566), 8 x 150 (No. 73567), Phillips PH 1 x 80 mm 1 (No. 73536),
PH 2 x 100 mm (No. 73537)
Model No.
kg g
Chisel screwdriver set EUROLINE IMPAKT, 5 pcs. 950 73575
VDE screwdriver set

Blades made of chrome vanadium molybdenum steel, thoroughly
hardened, extrusion-coated blade insulation tightly joined with
handle, 1,000 Volt
1000 V
14
Model No.
kg g
VDE screwdriver set, includes: 680 323126

Slot 2,5 x 75; 4,0 x 100; 5,5 x 125; 6,5 x 150
Phillips PH 1 x 80; PH 2 x 100 and live-wire-tester
311
Installation aids
ROCHECK ROCHECK
Spirit level for angled valves Spirit level for standard distances
For exact vertical and horizontal alignment of fittings Accurate installations with installation gauge for fittings,
with horizontal and vertical levels, unbreakable
KEY FEATURES
KEY FEATURES
Q With horizontal and head levels
Q One side with 1/2“ external screw thread Q For standard distances: 97 - 120 - 153 - 160 - 170 - 200 - 210 mm
Precise Installation! Exact Adjustment!
Exact installation by assembling jig for braces
4-part set (No. 70667) includes: spirit level for angled valves 200 mm (No. 70661),
spirit level for standard distances 300 mm (No. 70665), 1 flexible ruler 2 m
(No. 252100), steel carrying case (No. 24022)
Model kg g No.
ROCHECK set in steel case 2,260 70667

ROCHECK spirit level for angled valves 200 mm 220 70661
ROCHECK spirit level for standard distances 300 mm 260 70665
Cartridge extractor set

Simple extraction of cartridges in taps
KEY FEATURES
Q Simple extraction of cartridges in taps
Q 4 adaptors with hook, threaded rod, screw or rivet adaptor for
cartridges made before 1979, starting in 1979 and MOEM
cartridges, as well as extraction tools
Simple use:
Screw the appropriate cartridge extractor on the threaded rod, attach
to the cartridge, guide the cartridge body and counter piece over the
thread rod, rotate the t-handle and pull the cartridge out of its seat.
14 Set (No. 854390) includes: T-handle (No. 854380), screw 12 x 92 (No. 854381),
turning handle (No. 854382), threaded rod M10 x 130 (No. 854383), cartridge body
32 x 131 (No. 854384), cartridge extractor with thread (No. 854385), cartridge
extractor with hook (No. 854386), cartridge extractor 20 x 45 (No. 854387), counter
piece (No. 854388), steel carrying case
Model kg g No.
9-part set 1,250 854390
312
Installation aids
Standard spirit level
KEY FEATURES
Six-ring spirit level for applying
1% and 2% gradients! Q Deformation-free aluminium rectangular profile, anodised
Q Imprinted, centred centimetre scale
Q Shock and weather proof
Q Horizontal and vertical levels, non-breakable, permanently
10 year warranty!
aligned in carrier
Q Measuring accuracy in normal position 0.029° = 0.5 mm / m
Model mm
kg g No.
Standard spirit level 430 260 1500001583

Standard spirit level 600 340 1500001547
Standard spirit level 1,000 640 1500001548
ROMATIC and ruler

Measuring tape KEY FEATURES
Q Easy handling
Q Automatic tape rewind
Q With set/stop button that can be used as marker for
repeated measurements
Measuring length Tape width

Model m mmkg g No.
Tape measure ROMATIC 5 19 230 77397

Folding ruler, wooden 2 100 252100
Basin nut wrench

Special chrome vanadium steel, drop forged, very tough
KEY FEATURES
Q Optimum force transmission with the T-handle
Q Rotatableclaw for right and left-handed rotation
14
Clamping range Clamping range

mm Inch mmkg g No.
19 - 32 3/4“ - 1.1/4“ 235 475 1 70228
313
Installation aids
Electrical power combination pliers Electrical edge cutter
Q Equipped with an integrated ring spanner for M8 and Q Inductive hardened blade to ensure a higher service life
M10 nuts/screws Q Wave profile of the blade provides an anti-slip function:
Q Inductive hardened blade to ensure a higher service life The wire does not slip out while being cut
Q Asymmetric grip function can be used to grab round Q Comfortable handling thanks to ergonomic 3K handles
or flat materials
1000 V 1000 V
IEC 60900 IEC 60900
180 250 1500003163 180 210 1500003164
Electrical multi insulation stripper Electrical power edge cutter

Q Improvement of the common insulation stripper and Q Inductive hardened blade to ensure a higher service life
does not need an adjusting screw Q Wave profile of the blade provides an anti-slip function:
Q Ideally suitable to strip Ø 5 – 16 mm cable coatings The wire does not slip out while being cut
Q The stripping function enables cable stripping of single- Q High cutting performance suitable for piano wire
or multicore cables up to Ø 5.0 mm up to Ø 2.5 mm
1000 V 1000 V
IEC 60900 IEC 60900
180 230 1500003167 200 300 1500003166
Electrical long nose pliers Ergonomic electrical installation pliers

Q Inductive hardened blade to ensure a higher service life Q Integrated stripping function, ring spanner and gripping
Q Integrated M10 ring spanner to tighten/loosen nuts zone for flat and round material
and screws Q Multi purpose tool makes lots of other tools obsolete
Q Grab wires precisely, the serrated gripping surface Q Angled design enables low-fatigue working
ensures a tight, firm grip
1000 V
IEC 60900
14
1000 V
IEC 60900
200 200 1500003168 200 290 1500003169
314
Installation aids
Telescopic basin nut wrench Basin nut pliers
Chrome-plated, with pivoted reversible jaw for right and Special chrome vanadium steel, drop forged, coated with
left-handed rotation adjustment screw
Telescopic attachment,
4x adjustable in length!
Clamping range Clamping range

mm Inch kg
mm g No.

10 - 32 3/8 - 1.1/4” 275 - 455 710 70225 kg g
Model mm No.
20 - 48 3/4 - 1.7/8” 290 - 470 740 70226
32 - 63 1.1/4 - 2.1/2” 290 - 470 780 70227 Basin nut pliers 270 580 351050
Sheet metal crimping pliers

Self-opening, PVC coated handles
Q For joining of sheets up to 1 mm thick using ripple on pipe end
Q Exact and quick adjustment
Sheet thickness
Inch mm mm kg g No.
10” 250 1.0 450 71095
14
315
Drill driver
RO DD60 cordless drill driver 1) 2)
The RO DD60 can be used as drill and screwdriver

Q Quick change of bit retainer and bits, for flexible working Batteryvoltage: 18 V
Q Spindle with hexagonal recess for screwdriver bits for working Max. torque: 34 Nm / 60 Nm
without chuck Weight with battery pack: 1.9 kg
Q Precise working conditions thanks to integrated working light Drill-Ø steel: 13 mm
for illuminating the contact area Drill-Ø soft wood: 38 mm
Q Handy belt hook and bit holder can be fixed either on the right
or left sideTA
Spindle with hexagonal recess Extremely powerful
For screwdriver bits for working 4-pole motor for fast drilling
without chuck and screwdriving
Quick change chuck
Quick change chuck for

flexible work
Belt hook
Can be fixed either

on the right or left
side Bit holder
Can be fixed either on the right No. 1000001949

LED-Light
or left side
Integrated working light to
illuminate the contact area
Maximum power
Intelligent battery management

with charge indicator to control the
status of charge
14 Set (No.1000001647) includes: RO DD60 drill driver, RO BP18/2 2.0 Ah battery

(No. 1000001652), RO BC14/36 charger EU (No. 1000001654), quick change chuck,
quick change bit holder, belt hook and bit case, ROCASE 4414 anthracite (No.
1000001949)
Model No.
RO DD60 drill driver w/o battery and charger 1000002035

RO DD60 drill driver set EU 1000001647
316
Screw bits and drill bits
ROBIT PRO ROBIT PRO torsion
32 pieces 15 pieces
Set (No. 1500002453) includes: 30-bit: 1/4” x 25 mm, PH: 1, 2, 2, 3 mm, Set (No. 1500002454) includes: 14-bit: 1/4” x 25 mm, PH: 1, 2 mm, PZ: 1, 2 mm, FD: 4,
PZ: 1, 2, 2, 3 mm, FD: 3, 4, 5, 6 mm, HW: 3, 4, 5, 6 mm, TX: 10, 15, 20, 25, 27, 30, 6 mm, HEX: 3, 4, 5 mm, TX: 10, 15, 20, 25, 30 mm, quick release magnetic bit holder
40 mm, TTX: 10, 15, 20, 25, 27, 30, 40 mm, quick release magnetic bit holder

Q Extensive bit set as perfect equipment for professional craftsmen Q For extrem usage
Q High-quality material for heavy usage Q Suitable for an impact wrench
Q Adjustable belt-clip Q Special alloy for maximum life time
Model No. Model No.
ROBIT PRO 32 pcs. 1500002453 ROBIT PRO torsion bit set 15 pcs. 1500002454
PROFI PLUS
Twist drill set DIN 338 type N
HSS rolled, all drill diameters in 0.5 mm diameter steps
No. 816990
14
Drill range Drill

Model mm quantity
kg g No.
In ROUNDBOX 1.0 - 10.0 19 pcs. 465 816990

1)

2)
317
Screw bits and drill bits
Screw extraction sets
For boring out broken screws or bolts for threads M 5 - M 16
INSTRUCTIONS FOR USE

1. Apply bore with guide bush and the appropriate, ground HSS
drill bit. Pre-bore for screws 7 mm diameter and above
2. Insert boring stud (no deformation of the drilled workpiece)
3. Attach boring nut and turn with spanner, do not tilt
4. U se special guide bushes for sunken or protruding rupture points
1 2 3
Instructions for screw extraction

For rough-running threads, spray on solution or apply heat.
Fig. Screw extraction set, 25 pieces
Boring studs are made of high-quality material, therefore they do
not twist or heat up.
Screw extraction sets

Packaged in handy plastic box with spiral drills, guide bushes, boring
studs and boring nuts
Set Set contains Quantity

complete for piece kg g No.
Size 1 M 5 - M 12 21 pcs. 450 71310

Size 2 M 5 - M 16 25 pcs. 580 71311
For Guide bush Guide bush Pre-boring Boring Boring stud Boring stud Boring nut hex Boring nut
thread size No. mm No. mm No. Gr. mm No. for size No.
M 5 Size 1 71291 3.2 71301 Size 1 3.2 R7128100 Size 1 / SW 10 71286

M 6 Size 2 71292 3.2 71301 Size 2 4.8 R7128200 Size 1 / SW 10 71286
M 7 Size 3 71293 3.2 71301 4.8 71302 Size 3 6.4 R7128300 Size 2 / SW 11 71287
M 10 Size 6 71296 4.8 71302 6.4 71303 Size 3 / SW 13 71288
M 12 Size 7 71297 4.8 71302 8.0 71304 Size 4 / SW 14 71289
M 15 Size 9 71299 6.4 71303 8.7 71305 Size 5 / SW 17 71290
M 16 Size 10 71300 6.4 71303 8.7 71305 Size 5 / SW 17 71290
Toolkit sets
For versatile applications in installation and maintenance
No. 1000002182
Set (No. 1000002180) includes: 1x thin type lever ratchet handle with 72-teeth
gear, 2x extension bars 50mm and 100mm, 1x universal joint, 1x sliding T-head 3/8“
x 1/4“, 12x sockets: 4-5-5,5-6-7-8-9-10-11-12-13-14mm, in soft foam and ROBOX
B2350 (No. 1500002641)
14 Set (No. 1000002181) includes: 1x 1–1/4“ bit holder, 52x bits 1/4“ x 25 mm: 13x star bit
No. 1000002180 No. 1000002181
(torx) 5–6–7–8–9–10–15–20–25–27–30–35–40 mm, 6x hex bit (H) 2–2.5–3–4–5–6 mm,

3x tri wing bit 1–2–3 mm, 5-ribe bit (RM) 5–6–7–8–9 mm, 9-pentalobe bit 7–10–15– Model No.
20–25–27–30–40–45 mm, 3-spline bit (M) 5–6–8 mm, 6-hex bit SAE (H) 5/64“, 3/32“,
7/64“, 1/8“, 9/64“, 5/32“, 4x torq bit 4–6–8–10 mm, 4x spanner bit 4–6–8-10 mm, in
soft foam and ROBOX B2350 (No. 1000002641) 17 pcs. socket set 1/4“, ROBOX 1000002180*
53 pcs. special application bit set 1/4“, ROBOX 1000002181*
Set (No. 1000002182) includes: 10x bits 90mm: 2x Phillips: 1–2 mm, 2x Pozi: 1–2 mm, 10 pcs. color ring bit set 1/4“, ROBOX 1000002182*
6x torx: 10–15–20–25–30–40 mm with color ring in soft foam and ROBOX B2350
(No. 1500002641) * ROBOX system p. 332
318
Hole saw
UNICUT HM
Carbide-tipped hole saws for cutting circular holes
Ø 16 - 140 mm (5/8 - 5.1/2“) without impact
Product profile
APPLICATION AREA
For stationary and free-hand cutting of circular holes. For iron,
steel, V2A - V4A, cast, copper, bronze, aluminium, zinc, plastic,
fibre-glass, chipboard and wood, light construction plaster
boards without impact
KEY FEATURES
Q For use even in high-speed hand drills and stand-mounted
drilling machines due to anti-slip shaft
Q Positive cutting angle for good chip removal
Q Includes adaptor holder and replaceable HSS-Co5 centring
drill up to 4 mm sheet thickness, cutting depth 10 mm
UNICUT HM
Hole saw set
(Fig. similar)
(Fig. similar)
14
Set (No. 21300) includes: hard metal hole saws, drill paste 40 g and spare centering
pin Ø 6 mm (No. 21394), in plastic case

mm Inch
kg g No. mm Inch
kg g No. Model kg g No.
16 5/8” 100 21316 34 180 21334 UNICUT HM Set 22 - 25 - 28 - 32 - 35 mm 950 21300

29 140 21329 35 1.3/8” 190 21335 Spare centering pin HSS 8 mm 21395
319
Drill bit and impact wrench
UNIDRILL
HSS stepped drill bit
In one step, sheets can be centred, spot drilled, drilled and deburred
3-part set (No. 21313) includes: stepped drill bit size 1 (No. 21305), size 2 (No. 21306)
and size 3 (No. 21307), in steel case

Model mmkg g No.
UNIDRILL stepped drill bit set, 3 pcs. 4 - 30 660 21313
Shaft
Size mm mm mmkg g No.
No. 21313
3 4 - 30 100 10 185 21307
RO ID400 cordless impact wrench 1) 2)
Enables the quick assembly and disassembly of screws and hexagon

nuts. The profiles of pre-wall installations and sprinkler systems
therefore no longer pose a challenge.

Q nique brushless motor for quick work progress and highest
U Battery voltage: 18 V
efficiency for any application Weight with
Q High torque accompanied by an exceptionally compact design Batterypack: 1.9 kg
Q Twelve speed/torque levels for a wide range of applications Max. torque: 400 Nm
Q Handy belt hook, can be fixed either on the right or left side Max. no-load speed: 0 - 2,150 rpm
Maximum impact rate: 4,250 rpm
Unique brushless motor
For quick work progress and

High torque highest efficiency for any
application
Accompanied by
an exceptionally
compact design
Belt hook
Can be fixed either on

the right or left side
Bit holder
No. 1000001949
Twelve speed / Can be fixed either on
torque levels the right or left side
For a wide range

of applications
14 Set (No.1000001648) includes: RO ID400 impact wrench, RO BP18/2 2.0 Ah battery

(No. 1000001652), RO BC14/36 charger EU (No. 1000001654), bit holder, belt hook,
ROCASE 4414 anthracite (No. 1000001949)
Maximum power
Model No.
with charge indicator to control RO ID400 impact wrench w/o battery and charger 1000002036
the status of charge RO ID400 impact wrench set EU 1000001648
1)
320 2)
Angle grinder
RO AG8000 cordless angle grinder 1) 2)
Smaller working steps such as the abrasive removal of hanger bolts

or the cutting of a U-profile are handled quickly and easily.
The slim design, as well as the rotating battery, enables work to be
undertaken in cramped spaces and also simplifies working areas
such as the disassembly area.

Q S lim design for prolonged comfort when working overhead or Battery voltage: 18 V
in areas with limited space Weight without
Q Save time and be safe with the tool-free adjustable guard Batterypack: 1.7 kg
Q Detachable dust protection filter protects motor from coarse Idle frequency: 8,000 / min-1
particles Grinding wheel Ø: 125 mm
Spindle thread: M14
Maximum power
Intelligent battery management with

charge indicator to control the status
of charge
Batterypack can
be swiveled
For better working in

confined places
Electronic soft start
For smooth start-up
Quick system
For tool-free disc

change by means
of a quick-locking
nut
Detachable dust filter
Protects motor from coarse particles
Slim design
For prolonged comfort when

working overhead or in areas
with limited space
Tool-free
adjustable guard Side handle
Twist-proof Can be fixed either on the

right or left side
Set (No.1000001649) includes: RO AG8000 angle grinder, RO BP18/4 4.0 Ah battery 14

(No. 1000001653), RO BC14/36 charger EU (No. 1000001654), guard, quick-locking
nut, side handle, dust filter, ROCASE 4414 anthracite (No. 1000001947)
Model No.
No. 1300003338
RO AG8000 angle grinder w/o battery + charger 1000002037
RO AG8000 angle grinder set EU 1000001649

1)

2)
321
Cutting discs
Edged stainless steel

Cutting disc assortment
Edged steel profiles

High strength steel
Alumniumalloying
unalloyed steel
Rust- and acid-
Brass / bronze
resistant steel
Welded joints
For burr-free and quick cutting of stainless steel,
Alloyed and
Steel panel
Tool steel
steel, cast iron and stone
profiles
Copper
Cast
Description No.
Cutting disc INOX PROFI PLUS (115 x 1 x 22) 071533D n n n nn n n n n  nn nn nn
Cutting disc INOX PROFI PLUS (125 x 1 x 22) 071534D n n n nn n n n n  nn nn nn
Cutting disc INOX FINE CUT (115 x 0.8 x 22) 1500003464 n n n n nn nn nn nn  n n n
Cutting disc INOX FINE CUT (125 x 0.8 x 22) 1500003465 n n n n nn nn nn nn  n n n
nn = very well suited n = well suited  = partially suited
INOX PROFI PLUS

Grinding / cutting discs for stainless steel (1 mm)
For thin sheet metal (e.g. in body work, tank equipment and container
construction), steel cable, thin-walled profiles and pipes made of
stainless steel and NE metals, composite materials (GFK),
high-temperature materials
Q T his very thin wheel enables a one-of-a-kind clean cut with a
minimum of effort in a short amount of time
Q M illimetre accurate use, vibration-free operation without thermal
blue discolouration or burr formation (burr-free)
Model Dimensions kg
mm g No.
PROFI PLUS box 115 (10 pcs.) 115 x 1 x 22 350 1 071533D

PROFI PLUS box 125 (10 pcs.) 125 x 1 x 22 450 1 071534D
Follow all Do not use

manufacturers Don‘t Follow work defective grinding/
instructions rough down safety measures cutting discs
INOX-FINE CUT
Cutting disc for stainless steel (0.8 mm)
For thin sheets, steel cables, thin-walled profiles and stainless steel
tubes and non-ferrous metals, composite materials (GFK).
Q Very high cutting speed ensures a soft and fast cut with minimum
contact pressure
Q Low flying sparks with extra fine and low-burr cutting pattern
115 mm
4 1/ 2”
0,8 mm
0.030”
22,23 mm
7/ 8”
14 4 004625 530689
Model Dimensions mm
kg g No.
INOX FINE CUT (10 pcs.) 115 x 0.8 x 22 333 1500003464

INOX FINE CUT (10 pcs.) 125 x 0.8 x 22 390 1500003465
322
Rotary hammer and chisel
RO RH4000 cordless rotary hammer 1) 2)
The notion of compatibility improves the craftsmanship of the

professional plumbers. With the help of the new cordless rotary
hammer, slots can easily be drawn, tiling can be knocked into
place and pipe clamps can be fastened. There are no working
hindrances due to empty batteries, thanks to the ROTHENBERGER
battery platform.

Q ombination hammer with 3 functions: hammer drilling, drilling
C Battery voltage: 18 V
and chiselling Weight with batterypack: 2.9 kg
Q Variospeed (V) electronics for working at customised speeds to Max. single blow energy (EPTA): 2.2 J
suit various application materials Maximum impact rate: 4,000 /min.
Q S-automatic safety clutch: mechanical decoupling of the drive Drill-Ø concrete with hammer drills: 24 mm
for safe working should the drill stop unexpectedly
Drill-Ø masonry with core bits: 68 mm
Q LED work light for optimum view of the drilling site
Drill-Ø steel: 13 mm
Q Battery packs with capacity display for checking the charge status
Drill-Ø soft wood: 25 mm
No-load speed: 0 - 1,100 /min.
Automatic safety clutch Bit retainer: SDS-plus
Mechanical decoupling of the
drive for save working, in case
the drill driver stops unexpectedly
No. 1000001949
SDS-plus Variospeed (V) electronics

Bit retainer For working at customised
speeds to suit various
application materials
LED light
Integrated working light
to illuminate the contact area
Maximum power
with charge indicator to control
the status of charge
Model No.
Set (No. 1000001650) includes: RO RH4000 rotary hammer (No. 1000002038), RO
BP18/4 4.0 Ah battery (No. 1000001653), RO BC14/36 charger EU (No. 1000001654),
hammer chuck for tools with SDS-plus shank end, rubber-coated side handle RO RH4000 rotary hammer w/o battery + charger 1000002038
drilling depth guide, ROCASE 4414 anthracite (No. 1000001948) RO RH4000 rotary hammer set EU 1000001650
Chisel
High-quality, fully coated steel chisels with high
life time. The construction and cutting edge
geometry enable a heavy stock removal
Set (No. 1500002829) includes: flat chisel SDS-plus

(No. 1500002825), sharp chisel SDS-plus (No. 1500002826),
tile chisel SDS-plus, 40 mm (No. 1500002828), ROBOX No. 1500002828 No. 1500002827 No. 1500002826 No. 1500002825 No. 1500002824
B2650 (No. 1000002763)
Model Length No. 14

Tile chisel 80 mm SDS-plus 170 mm 170 mm 1500002824
Flat chisel SDS-plus 250 mm 250 mm 1500002825
Sharp chisel SDS-plus 250 mm 250 mm 1500002826
Hollow chisel 22 mm SDS-plus 250 mm 250 mm 1500002827
Tile chisel 40 mm SDS-plus 250 mm 250 mm 1500002828
Chisel set, 3 pcs. SDS-plus w/ ROBOX* 1500002829
1)
2)
More information at cordless-alliance-system.com 323
Drill bits and lamp
SDS-plus hammer drill
Model Ø No. Model Ø No.
Hammer drill SDS-plus 6 x 110 mm 111405 Hammer drill SDS-plus 14 x 260 mm 111432
Hammer drill SDS-plus 10 x 110 mm 111418 Hammer drill SDS-plus 18 x 450/410 mm 111447
RO FL180 cordless LED lamp 1) 2)
The RO FL180 is the perfect companion for plumbing technicians

and heating engineers. Due to its size and various adjustment
functions, the RO FL180 emits the perfect amount of light and
facilitates the everyday work of professional tradesmen.
KEY FEATURES: TECHNICAL DATA

Q P owerful LED inspection lamp for uniform, bright illumination Max. lumin. flux: 440 lm
of the working area Max. operation time
Q Compact and handy for versatile use per battery charge: 18 V / 2.0 Ah: 4.5h / 18 V / 4.0 Ah: 9.1h
Q Lamp head can be turned and swivelled through 180° providing Weight without
almost infinite positions for the lamp Batterypack: 0.46 kg
Q Swivelling hook for suspending the lamp
Powerful LED
inspection lamp
For uniform, bright

illumination of
the working area
Robust aluminum
die-cast housing
For use on
construction sites
Rotatable lamp head
Can be turned and swiveled

through 180° providing almost
infinite positions for the lamp
Compact and handy
For versatile use
14
Set (No.1000001651) includes: RO FL180 LED lamp, RO BP18/2 2.0 Ah battery Maximum power
(No. 1000001652), RO BC14/36 charger EU (No. 1000001654), ROCASE 4212 anthracite
with charge indicator to control
Model No. the status of charge
RO FL180 LED lamp w/o battery and charger 1000001734

RO FL180 LED lamp set EU 1000001651
324 *ROBOX system p. 340

CAS battery and charger
CAS battery packs and charger 2)
Unlimited combinations: Now you can combine machines, battery

packs and chargers of different manufacturer with each other
without any problems. CAS uses the world‘s most powerful battery
pack system in the industry - from Metabo.
With more than 30 years of battery pack expertise, Metabo is In comparison to the Li-Ion 4.0 Ah,
pioneer in the battery pack technology and in the topic of
”cordless construction site”.
the Li-HD 4.0 Ah is having less
weight, a slimmer design, but still
the same performance.
Permanent Electronic Single Cell Protection

(ESCP) when charging, for particularly
long life
No. 1000001653
No. 1000001652
No. 1000002548
High robustness due to

outer rubber Capacity control for a permanent
control of the filling level
No. 1000002549
100% compatibility for over 180 machines in the 18 V class!
66% faster charging
In comparison to the battery

charger of the ROMAX 3000
14
Model No.
RO BP18/2, 2.0 Ah 18 V Li-Power battery 1000001652

RO BP18/4, 4.0 Ah 18 V Li-Power battery 1000001653
RO BP18/4, 4.0 Ah 18 V Li-HD battery 1000002548
RO BP18/8, 8.0 Ah 18 V Li-HD battery 1000002549
RO BC14/36 battery charger, 230 V, EU 1000001654

1)

2)
325
Hammers and chisels
Fitter‘s hammer Lump hammer
Complies with DIN 1041, hickory wooden handle, Complies with DIN 6475, hickory wooden handle,
head secured by sealed shaft head secured by sealed shaft
Head weight
kg g Total weight
kg g No. Head weight
kg g Total weight
kg g No.
300 470 322823 1,250 1,380 322922
Chisel
Safety tempered impact head prevents
splintering off the chisel head
n Silver lacquered tip
n Chrome-manganese-silicon-steel
No. 77050
14
Length Shaft Cutting without hand protection with hand protection

Model mm mm width mm kg g kg g No.
Mason chisel, flat 300 16 22 470 560 77050
326
Vices
Parallel vice Pipe vice
With forged and hardened pipe jaws, steel forged underneath Foldable, with automatic closing hook, upper jaw and lower support
the parallel vice jaws jaw milled and hardened. Powerful smooth-running spindle.
n Non-breakable Durable epoxy-powder coated
n Protected, powerful spindle with trapezoidal thread n Reliable hold: Pipe support and movable upper jaw
n Re-adjustable double-sided guide

n Anvil base for levelling and compressing work
For pipes / inch for pipes / mm kg g No.
Jaw Clamping 1/8 - 2” 10 - 60 3.7 70710

width width depth for pipes for pipes Spare jaws (contains: 3 pcs.) 0.2 70670
mm mm mm Inch mm kg g No. 1/8 - 3” 10 - 89 7.9 70712
Spare jaws (contains: 3 pcs.) 0.2 70672
120 125 65 3/8 - 1.1/2” 16 - 55 8.7 070705X 1/8 - 4” 10 - 114 11.7 70711
140 150 80 3/4 - 2” 27 - 70 15.6 070735X Spare jaws (contains: 3 pcs.) 0.2 70671
Chain pipe vice ROBOY clamping workbench

Tough, powerful design with V-shaped support, bending For on-site repair and service work
device, pipe support, wear-resistant jaws are forged and n Portable, handy and practical workbench with the smallest
hardened, powerful chain, quick fastening due to offset dimensions
lever and pre-tensioning screw, simple conversion to other n Mountable on door frames or walls: Prevents floor damage
pipe diameters, extremely robust powder epoxy coating and saves space
n V-shaped pipe supports with teeth and bridge n Pressure plate is coated with rubber to protect against damage
prevent undesired bending during clamping n Spindle with trapezoidal thread for quick adjustment
n Exchangeable jaws
n With height-adjustable support pipe for additional stability
For pipes / Inch for pipes / mm kg g No.
1/8 - 2.1/2” 10 - 76 3.8 70713

Spare jaw 0.7 70734 14
Spare chain 0.5 70731
Parallel vice (No. 070705X) and rotatable table
1/8 - 4” 10 - 114 6.2 70714 not included
Spare jaw 0.8 70721
Spare chain 0.6 70732
1/8 - 6” 10 - 165 9.3 70715 Model Dimensions / mm kg g No.
Spare jaw 0.9 70722
Spare chain 1.3 70733 ROBOY 650 x 400 14.9 70700
327
Workbenches
Tripod uni workbench
With / without integrated chain vice
n Collapsible,extremely stable frame
n Attachment of various tools is possible
n Screw fixture for 1“ pipe to enable overhead support of the unit
with integrated chain vice
n Bending of pipes Ø 3/8” - 1/2” - 7/8”
without integrated chain vice
n Bending of pipes Ø 3/8” - 1/2” - 3/4”
No. 70752
n Universal vice attachments applicable for pipe vice (No. 70710)
and chain pipe vices (No. 70713, 70714, 70715)
Working unit
With pipe vice 1/8 - 2“
n Collapsible, stable, non-slip frame
n with folding pipe vice, bending holes and large tool tray
No. 70740
Model kg g No.
No. 70751
Tripod universal workbench w/ chain vice 16.0 70752
Tripod universal workbench w/o chain vice 15.3 70751
Tool 1/8“ - 2“ 21.0 70740
Telescopic workbench Universal workbench

n Stable, collapsible steel tube frame with the smallest dimensions n Stableand tough, easy to transport: collapsible tubular frame
n Portable, handy and practical n Optimum work surface: work plate made of processed beech wood
n With tough beech wood plate for an optimal work surface n Model “Pipe-fitter” steel edges all around: ideal for vice machining
n Steel edges all around: ideal for vice machining
n Individually removable supporting legs for working steps
with ease
14
Model Size mm kg g No.
Model Size mm kg g No. Installer 1,200 x 550 x 835 30 070690X

Pipe-fitter 1,000 x 700 x 835 32 70696
Telescopic workbench 700 x 450 x 30 17.4 070699X Pipe-fitter 1,200 x 750 x 835 38 70698
328
General aids and tool bags
Hemp dispenser with roll All-purpose marker
Writes on tile and glass
Carpenter pencil
Model No.
Model No.
All-purpose marker 856911
Roll 40 g / 40 m 70623 Carpenter pencil 856907
Cutter knife
Model No.
Cutter knife w/ 4 blades, 18 mm 1500000087

Blades for cutter knife (10 pcs.) 1500001299
Trendy tool bag Tool bag Tool bag, small

n Lots of storage room for all your tools n Offersa lot of pockets and tool holders Q ffers a lot of pockets and tool holders
O
with a waterproof plastic bottom with a waterproof plastic bottom
Volume:
ca. 42 l
Volume: Volume:
ca. 30 l ca. 15 l
Model No. Model No.
Trendy tool bag (380 x 300 x 370 mm) 402311 Tool bag, small (280 x 360 x 230 mm) 1500002182
Tool bag (450 x 285 x 335 mm) 1500001320
Toolbox Trendy shoulder Tool bag universal

apprentice toolbox n Ideal
for hand tools with straps
n Lots
and flaps inside the roll cover
of storage room for all n Verylight, handy bag for the
your tools most important tools
Volume:
ca. 11 l
14
Model No. Model No.
Toolbox apprentice 402312 Trendy shoulder toolbox (250 x 220 x 140 mm) 402308
Tool bag universal (220 x 440 x 230 mm) 1500002230
329
Tool bags
Apprentice set, 50 pcs.
Tough installation toolbox completely equipped with
all the tools the craftsman needs
Q Extensive and practical tool assortment
Q Case made of galvanized steel
Q Dimension: 530 x 200 x 200 mm
Set (No. 19166) includes: water pump wrench type SP 10“, corner pipe wrench
Super S (1“), ALU-spirit level, anodized (500 mm), hacksaw frame (300 mm),
10x HSSE 4 PLUS saw blades, fitter‘s hammer (300 g), lump hammer (1,250 g),
PUK-hacksaw (290 mm) + 12x saw blades, basin nut wrench, stone chisel flat
(300 x 16 mm), Ratched key ROCLICK 19 mm, UNI-stepped key + ratchet, EUROLINE
screwdriver set (Phillips), chassis punch (32 mm round), wooden ruler (2 m),
carpenter pencil, TUBE CUTTER 35 (6-35 mm), MINICUT I PRO (3-16 mm),
extension key, corner pipe wrench Super S (1.1/2“), cutter knife, ROGRIP F 10“ 1K,
installer toolbox, dimensions: 530 x 200 x 200 mm
Model No.
Apprentice set, 50 pcs. 1 19166
General purpose tool set, 57 pcs. General purpose tool set, 17 pcs.
Tool bag with a lot of pockets and tool holders with Compact tool bag with a lot of pockets and tool
a waterproof plastic bottom. The set offers a good holders with a waterproof plastic bottom. The set
selection of high quality tools for every craftsman. offers a good selection of high quality tools for
every craftsman.
Set (No. 1000001425) includes: TUBE CUTTER 35 DURAMAG (6 - 35 mm), UNI-step-

ped key + ratchet, Uni-small saw PUK, 10x saw blade for PUK-saw metal, saw bow
ROBO Super, 10x saw blades BI-METALL HSSE 4 Plus, Ratched key ROCLICK 19 mm,
14 EUROLINE screwdriver set (2x PH, 4x Sclot), spirit level, carpenters pencil, flexible Set (No. 1000001745) includes: EUROLINE screwdriver set, water pump pliers SP 10”,
ruler, MINICUT I Pro (3-16 mm), profi universal knife, hammer with hickory water pump pliers SP 7”, professional cutter knife, MINI MAX Tube Cutter, 3-28 mm,
wooden handle, electrician chisel, flat, sanitary four way key, ROGRIP M XL (3.1/2“), GRATFIX HSS with spare blade, sanitary four way key multifunctional 3/8-1”, flexible
ROGRIP M 10“ 1K, ROGRIP M 7“ 1K, ROCUT TC 42 (0-42mm), SWO adjustable ruler, wooden, 2 m, aluminum spirit level, carpenter pencil, safety glasses UVEX,
wrench 8“, tool bag (450 x 285 x 335 mm) tool bag (280 x 360 x 230 mm)
Model No. Model

Model No.
No.
General purpose tools set, 57 pcs. 1000001425 xxxx. 1

General purpose tools set, 17 pcs. 1000001745
xxxxx
330
Case system
ROCASE case system
ROCASE 4212 ROCASE 4407 ROCASE 4414 ROCASE 6414 ROCASE 6427
No. 1300003334 No. 1300005506 No. 1300003541 No. 1300003336 No. 1300003337
Outer dimension: 390 x 190 x 120 mm 390 x 390 x 70 mm 390 x 390 x 140 mm 590 x 390 x 140 mm 590 x 390 x 270 mm
Inner dimension: 377 x 150 x 100 mm 349 x 356 x 51 mm 348 x 352 x 122 mm 548 x 352 x 122 mm 548 x 352 x 250 mm
Volume in l: 5.7 l 6.3 l 14.9 l 23.5 l 48.2 l
Weight: 0.63 kg 1.2 kg 1.30 kg 1.89 kg 2.64 kg
Color: red, anthracite red red, anthracite red red
Quantity of inlays
(currently changed): 7 16 6 1
Shoulder belt mount
Foldable front handle
ROCASE click system

Robust Click together in one step,
lock load up to 50 kg
Through ABS plastic
Label field
Three positions for stickers

Eyelet
For padlock or seal
Model No.
14
ROCASE 4212 red, without inlay 39 x 19 x 12 cm 1300003334
ROCASE 4212 anthracite, without inlay, 39 x 19 x 12 cm 1300003649
ROCASE 4414 anthracite, without inlay, 39 x 39 x 14 cm 1300003338
ROCASE 6414 red, without inlay, 59 x 39 x 14 cm 1300003336
ROCASE 6427 red, without inlay, 59 x 39 x 27 cm 1300003337
331
Case system
ROCASE shoulder belt
Model No.
ROCASE shoulder belt with logo 1500002239
ROCASE 4212 / 4414 foam inlay

Model No.
ROCASE 4212 foam inlay 1500002449

ROCASE 4414 foam inlay 1500002450
No. 1500002239 No. 1500002450
ROCASE 4414 with tray and ROBOX

Set includes: ROCASE 4414, 2x ROBOX tray, 12x ROBOX B2350 (No. 1500002641)
Model No.
1000002108
ROCASE 4414 red, with 2 trays and ROBOXES
No. 1000002109
ROBOX set for ROCASE 4414
Set includes: 1x ROBOX tray, 6x ROBOX B2350 (No. 1500002641)
Model No.
ROBOX set for ROCASE 4414 1000002109
ROBOX
Model No.
ROBOX B2350, 192 x 114 x 50 mm 1500002641

ROBOX B2650, 364 x 114 x 50 mm 1500002763 No. 1000002108 No. 1500002763 No. 1500002641
ROCASE 4407 with ROBOX

The ROCASE with a transparent lid is compatible with
the other cases. In the inside of the case there is a
structure to fix the ROBOXes.
KEY FEATURES:
Q Optimisation of the daily work because items are perfectly
organised into the case
Set includes: ROCASE 4407, 6x ROBOX B2350 (No. 1500002641)
Model No.
14
ROCASE 4407 with ROBOX, 390 x 390 x 70 mm 1000002625
332
Case system
ROCASE trolley
The ROCASE trolley allows an easy transportation
of the ROCASE system and other bulky loads.
It is foldable really easily and can be stored in the car.
To fix the load at the trolley there is a strap included.
KEY FEATURES
Q Load capacity up to 120 kg
Q Ideal to carry ROCASEs
Q Big wheel diameter: easy to go over stairs
Q Including a long strap with hooks to fix the load
Model
kg g No.
Cases not included
ROCASE trolley, 78 x 48.5 x 6 cm 7.0 1000002628
ROBUCKET
The ROBUCKET is a tool bucket for a versatile usage
and can be fixed at the ROCASEs. To organise also
small items in the bucket there is a ROBOX B2650 in
the set included.
KEY FEATURES
Q Handle allows comfortable transport
Q ROBOX B2650 can be stored inside the bucket to stow accessories
Q Liter display in the inside of the bucket
Q Belt mount for shoulder straps
Model
kg g No.
ROBUCKET with 1x ROBOX B2650, 1.6 1000002627

39.5 x 31.2 x 32.1 cm
Hand tool kit 4414, 18 pcs.

Tool set in the ROCASE system with useful bags and
tool holders.
KEY FEATURES
Q Wide and practice-oriented tool range
Q Dimensions: 390 x 390 x 140 mm

TUBE CUTTER 35 DURAMAG, ROCUT TC 42,
ROGRIP M 7“ 1K, ROGRIP M 10“ 1K, ROGRIP
XL, pipe wrench 1“, uni stepped key set and
ratchet, SWO adjustable wrench, EUROLINE
screwdriver set, standard spirit level 430 mm,
14
ROMATIC and ruler, shoulder belt with logo,
in ROCASE completely
Model No.
1000001955
Hand tool kit 4414, 18 pcs.
333
Index
Alphabetical
ItemPage ItemPage ItemPage
Clutch jaws 232 Flexible pipe welding attachments 165

# Concrete / masonry fixing set 51 Four-blade cutter 238
3-piece pressure hose sets 277 Copper rings 1.1/4“ 51 Funnel auger 236, 237
Copper tube bending springs 63
A Corner pipe wrench 45° 301 G
Adaptor magazines 232 Corner pipe wrench 45°, SUPER S 301 Gas test plug / adaptor 189
Adjustable wrench 287, 309 Cross-blade cutter, serrated 236, 238 General purpose tool set, 13 pcs. 330
AIRPROP 156 Cutter knife 329 General purpose tool set, 57 pcs. 330
ALLGAS 2000 PS 0.5 / 2 Basic 167 Cutter wheels 25 GRATFIX HSS / UNIGRAT 34
ALLGAS 2000 PS 0.5 / 2 Compact 165 Cutting disc assortment 322 Grease cutter 238
ALLGAS 2000 set 164 Cylinder pressure reducer 171 Grooved water pump pliers CL 299
ALLGAS 2000 welding tips 165 Cylinder transport trolley 170
ALLGAS Mobile Pro 166 H
All-purpose marker 329 D Hand roll groover 1 - 12” 142
Ammonia stone 172 Deburrer adaptor I / II 33 Hand tool kit 4414, 18 pcs. 333
Analogue manifolds 276 Double clamp short 257 Hand wire brushes 173
Apprentice set, 50 pcs. 330 Drop-head auger 237 Hand-held welding mirror 172
Automatic ratchet telescopic pipe Dual hoses A/O 170 Hard solder paste LP 5 176
17
cutter DURA LAZR TEC 110 Hard solder powder HKM 176
DX High Speed Plusuniversal Hard solder rings S 2 176
B drill bits
49
Hard solders 177
›B‹ MaxiPro: HD 13/100 244
Join the press revolution!
104 E HD 13/100 – 17/190 – 19/180
245
Ball head cutter 240 EASYGRIP 305 accessories
Band saw blades for PORTACUT Electrical edge cutter 314 HD 17/190 244
29
185 BSR / BSP Electrical long nose plier 314 Heating plate 259, 263
Basic clamping set 110 mm 259 Electrical multi insulation stripper 314 Hemp dispenser with roll 329
Basic clamping set P 160 SANILINE 261 Electrical power combination plier 314 High Speed Plus natural stone 48
Basic clamping set P 250 A 263 Electrical power edge cutter 314 HM cutter clade inserts 25
Basin nut pliers 315 Electro-hydraulic House connection test set 190
87
Basin nut wrench 313 expander pistol H1 HSS bimetal 31
Battery pack system CAS, mains ENORM 4” 20 HSSE 4 Plus 28
211
adaptor & charger Ergonomic electrical Hydraulic expander system H 600 86
314
Bending spray 63 installation plier
Blowback prevention 171 EUROLINE 310 I
Bottle connection and adaptors 286 Expander A0 83 INOX Profi Plus 322
Brush attachments 211 Expander adaptor type S 84, 87 Interchangeable press jaw
112
Bulb auger 236 Expander head compatibility 88 compact
Bulb auger, long 237 Expander head ROLOCK and Internal brushes for copper pipe 173
82
Bulb Auger, short 237 standard
Burners cleaner 172 Expander head type S 84 J
Extensions 159 Jacket pipe cutter 26
C Extensions for drill bits 52
Carbide-tipped cutters 236, 240 Extraction rotor RODIADUST 53 L
Carpenter pencil 329 Extractor cam pincer 92 Lightweight steel cylinders, filled 170
Cartridge extractor set 312 Lump hammer 326
CAS battery packs and charger 325 F
Chain pipe cutter 17 Fitter's hammer 326 M
Chain pipe vice 327 Fitting key 304 Magnet welding mirror 172
Chain pipe wrench 4“ R/L 303 Fitting soft solder Manifold sets 276
174
Chain pipe wrench HEAVY DUTY 303 according to EN standard Manual drain cleaner type 3 S 224
Chain-spinning head with spikes 236 Fitting solder 1 S 175 Manual trimmer unit 259
Chain-spinning heads 239 Fitting solder 3 175 MAPP gas 154
Chain-spinning heads with spikes 239 Fittings soft solder flux 175 Maxigas 400 155
Chisel 323, 326 Fittings solders 175 Metal saw frame 28
Chisel screwdriver set Fittings wrench 90° 304 MINI MAX 16
311
EUROLINE IMPAKT Flame reflectors 173 MINIBEND 62
Clamping device Flange adaptor clamping unit 259 MINICUT 2000 16
15 257
for electric socket welding Flanged riveted expander heads 84 MINICUT I PRO / II PRO 16
Clutch jaw for R 750 232 Flaring and bending set 96 MSR internal bending springs 63
334
Index
Alphabetical
MULTI 300 Protective rubber cap 171 ROBOX plier sets 300
158
propane soft soldering kit ROBOX set for Rocase 4414 332
MULTIBEND standard bender 180° 61 Q ROBOY clamping workbench 327
Multigas 300 155 Quad clamps 257 ROBUCKET 333
Quick clamping column 51 ROBULL type E 66
N ROBULL type E 67
Neutralizer powder 220 R ROBULL type E bending segments 67
NIPPEL MAX 141 127, 129, ROBULL type ME 68
Nitrogen set 278 Ratchet pipe deburrer 1/4 – 2” 131, 133, ROBULL type ME 69
141 ROBULL type ME
O Ratchet spanner ROCLICK 308 bending segments
69
One-handed RE 17 cutting tips ROCADDY 120 R32

303 169 274
corner pipe wrench 90° and heating burners Analogue / Digital
One-handed pipe wrench RE 17 three-gas system ROCAL 20 / ROMATIC 20 219
302 168
ALUDUR AMS 10/10 ROCAL Acid Multi / Plus 220
One-handed pipe wrench RE 17 three-gas system ROCAM 4 Plus - 30 m 208
302 168
STILLSON AMS 5 and 10 ROCAM 4 Plus - 65 m 209
One-handed pipe wrench RE 17 three-gas system ROCAM 4 Plus mini module 209
302 168
HEAVY DUTY AMS 5/5 ROCAM camera heads 210
One-handed pipe wrench RE 17 UNIVERSAL ROCAM PE-X
303 169 81
OFFSET PATTERN HEAVY DUTY pipe welding set expander power torque
One-handed type R 309 RE 17 welding attachments 169 ROCASE 4212 / 4414
332
Oxy-acetylene hoses 170 RE 17 welding attachments, pluck foam inlay
169
Oxygen hoses 170 bendable ROCASE 4407 with ROBOX 332
Oxygen refilling bend 171 RE 17 wing-lever cutting ROCASE 4414 with
169 332
attachment tray and ROBOX
P Reducing / extension pieces 243 ROCASE case system 331
Parallel vice 327 Reduction inserts narrow P 110 259 ROCASE shoulder belt 332
Peeling device for Reduction inserts P 160 SANILINE 261 ROCASE trolley 333
257
electric socket welding Reduction inserts P 250 A 263 ROCHECK 312
Pipe cutters, cutting wheels Reduction inserts wide P 110 259 ROCHECK 312
21
and spare parts Reeling flaring tool 95 ROCLEAN function 218
Pipe roughing wrench 3/8 - 2” 141 Refilling adaptor 161 ROCLICK 307
Pipe supporting column 141 Refrigerant for ROCOOL 600 275
284
Pipe vice 327 air-conditioning units ROCUT 22
Pipe welding grip pliers 305 Replacement safety foot switch 141 ROCUT TC 26 / TC 32 PS 26 /
23
Pipe wrench 90° 301 Retrieving auger 236, 237 PS 42 S / PS 35 S
Plastic pipe chamfering unit 267 Ring ratchet spanner 308 ROCUT TC 50 / TC 75 Professional 23
Plate fin comb 287 Riveted expander heads H2 87 ROCUT TC 63 Professional 23
PORTACUT 185 BSR / BSP 29 RO AG8000 ROCUT 110 25
321
Precision die heads 134, 140 cordless angle grinder ROCUT 110 / ROCUT 160 24
Precision double flaring press RO DD60 cordless drill driver 316 ROCUT 160 25
93
DB 10 RO FL180 cordless LED lamp 324 ROCUT UKS 160 / 355 250
Precision threading dies 140 RO ID400 cordless impact wrench 320 ROCUT XL 250
Press chains standard 114 RO RH4000 RODIA DRY CLEANER 1600 53
323
Press jaws compact 111 cordless rotary hammer RODIACUT 150 / RODIADRILL 160 42
Press jaws compact Ø 35 mm 111 ROAIRVAC R32 280 RODIACUT 150 / RODIADRILL 200 42
Press jaws standard 112 ROAIRVAC R32 Series 281 RODIACUT 250 / RODIADRILL 500 44
Press jaws standard 3-elemental 113 ROBEND 3000/4000 RODIACUT 250 / RODIADRILL 200 44
72
Press jaws standard sets 113 bending formers RODIACUT 400 PRO /
46
PRISMACUT 40 ROBEND 4000 70 RODIADRILL 500
Pro bender 61 ROBEND 4000 sets 71 RODIADRILL 160 43
Professional sets 300 ROBEND H+W PLUS 64 RODIADRILL 200 43, 45
PROFI PLUS 317 ROBEND H+W PLUS bender 65 RODIADRILL 500 45, 47
Propane hose cut-off valve 161 ROBEND H+W PLUS bending sets 65 RODIADRILL Ceramic 41
Propane hoses 160 ROBIT PRO 317 RODRUM M & L drums 231
Propane regulators 160 ROBIT PRO torsion 317 RODRUM M & L 230
Propane steel cylinder 161 ROBO Mini 28 RODRUM S 228
15
Protective guard for ROBO Super 28 ROFAST pliers wrench 304
171
pressure reducer ROBOX 332 ROFIRE 4 153
335
Index
Alphabetical
ROFIRE 4 PIEZO 153 ROSCOPE i2000 203 Screw extraction sets 318
ROFIRE GLOBAL 152 ROSCOPE i2000 & Screwdrivers sets 310
207
ROFIRE Swivel PRO cyclone piezo 152 ROCAM 4 Plus app SDS-plus hammer drill 51, 324
ROFIRE Swivel PRO twin 152 ROSCOPE i2000 module 25 / 16 205 Sealing grip pliers 305
ROFIX adaptor 134 ROSCOPE i2000 module 25 / 22 204 Separating pin 233
ROFLAME 4 PIEZO 152 ROSCOPE i2000 module Serrated forked cutter 240
206
ROFLARE REVOLVER 94 ROLOC PLUS Sheet metal crimping pliers 315
ROFROST App 197 ROSCOPE i2000 module TEC 204 Silver hard solders
179
ROFROST Turbo R290 1.1/4” 195 ROSCOPE mini 202 Ag 134S 34 Cu U flux-covered
ROFROST Turbo R290 1.1/4” / ROSLICE 18 Silver hard solders
194
ROFROST Turbo R290 2” ROSOL 1 S 175 Ag 145S 45 Cu / 179
ROFROST Turbo R290 2” 196 ROSOL 3 175 S 45 Cu U flux-covered
ROFROST Turbo reduction inserts 197 ROSOL soldering paste 175 SMK-spirals 235
ROFUSE 400 / 1200 TURBO 256 ROSOLAR PUMP 221 Soldered joints 174
ROGRAT MSR deburrer and ROSOLAR PUMP PLUS 221 Soldering flux and container
35 172
chamfering tool ROSPI H+E PLUS 223 forhydrochloric acid
ROGRAT MSR system - ROSPIMATIC CL 225 Space welding 40
35
manual chamfering attachments ROTEST 191 Spade head cutter 236, 238
ROGRIP F 296 ROTEST Electronic 4 191 Spare extractor hooks 91
ROGRIP M 296 ROTEST GW 150/4 188 Special diamond drills for tiles and
51
ROGRIP plier sets 300 ROTEST GW Digital V3 186 natural stone
ROGRIP XL 297 ROTEST GW Digital V3 - Special pipe saw blades 31
187
ROGROOVER 1 - 12” 143 RoData Mobile App SPEED STAR DX 50
ROGROOVER 1 - 6” 142 ROTEST GW Digital V3 - Spiral and tool sets 242
187
ROKLIMA MULTI 4F 272 RoData PC-Software Spiral baskets 233
ROLeak Aqua Plus 190 ROTHERM 2000 162 Spiral guide gloves 233
ROLeak Pro 279 ROTHERM 2000 soft soldering set 163 Spiral guide hoses 232
Rolling skids 211 ROTORQUE AIRCON / Spiral retrieving device 233
97
ROLOCK COMBI KIT expander / REFRIGERATION Spiral sawtooth cutter 236, 238
89
tee-extractor ROTRAC 28 / 42 16 Spirals 8 mm / 10 mm 243
ROLOCK expander power torque 80 Rounding clamps 257 Squeezing device 257
ROLOCK expander power torque ROVLIES cleaning pads 173 S-SMK-spirals 235
81
sets ROWELD HE heating plates 251 S-spirals 235
ROLOT S 15 178 ROWELD P 110 258 Standard bender 180° 62
ROLOT S 2 177 ROWELD P 110 basic machine 259 Standard solder according to EN
174
ROLOT S 5 178 ROWELD P 125 251 ISO standard
ROLOT S 94 177 ROWELD P 160 SANILINE 260 Standard spirals 235
ROMATIC and ruler 313 ROWELD P 160 SANILINE 261 Standard spirit level 313
ROMAX 3000 AC 108 ROWELD P 250 A 262 Standard two handed bender 90° 61
ROMAX 4000 106 ROWELD P 250 A set 263 Step expander A1 85
ROMAX 4000 sets 107 ROWELD P 63 S-6 Sword 252 Straight auger 237
ROMAX AC ECO 109 ROWELD P 63 S-6 Sword sets 253 Strap and fittings wrench 305
ROMAX Compact TT 102 ROWELD ROFUSE Sani 160 / 315 255 SUPER 1.1/4” and 2” 20
ROMAX Compact TT sets 103 ROWELD type Premium CNC 265 SUPER 1.1/4” and 2” INOX 20
ROMAX expander AC ECO MAXI 85 ROWELD type Professional 264 SUPER CUT 126
RONOL 135 ROWONAL care and rust remover 233 SUPER CUT ratchet arm 129
RONOL SYN 135 ROXY 400 L 167 SUPER CUT sets Ø 1/2 - 1.1/4” 127
ROOFING set 159 RP 30 185 SUPER CUT sets Ø 3/8 - 1.1/4” 127
ROPOWER 50 R 136, 137 RP 50-S / RP 50-S INOX 183 SUPER CUT sets Ø 3/8 - 2” 127
ROPOWER HANDY 224 RP PRO III 184 SUPER FIRE 3 148
ROPOWER profile cable 235 SUPER FIRE 3 HOT BOX 149
ROPULS eDM App 217 S SUPER FIRE 4 150
ROPULS eDM flushing compressor 216 Safety igniters 171 SUPER FIRE 4 HOT BOX 151
ROPULS flushing compressor 217 Safety propane handles 160 SUPER FIRE 3 basic set 149
ROPUMP 222 Safety T-couplings 243 SUPER FIRE 4 basic set 151
ROPUMP SUPER PLUS 222 SANI KIT 128, 129 Supergas C 200 TSS 155
RO-QUICK 307 SANIFRESH 286 SUPERTRONIC 1250 130
ROREC 282 SANIGRIP/SANIGRIP PL 304 SUPERTRONIC 1250 set 131
15
ROREC PRO Digital 283 Sanitary four way key 306 SUPERTRONIC 2 SE 139
ROSCALE 120 285 Schrader valve tool 287 SUPERTRONIC 2 SE / 3 SE / 4 SE 138
336
Index
Alphabetical
ItemPage ItemPage
SUPERTRONIC 2000 132 Universal HSS bimetal /

31
SUPERTRONIC 2000 set 133 TCT TIGER SAW BLADES
SUPERTRONIC 3 SE 139 Universal internal & external
32
SUPERTRONIC 4 SE 139 deburrer
Surface-heating burner heads 159 Universal ROTIGER VARIO
30
SWO adjustable wrench 309 Electronic
Universal workbench 328
T
Tee-extractor 91 V
Tee-extractor ratchet 92 Vacuum pump RODIA-VAC 51
Tee-extractor sets 90 Vacuum-sets 51
Telescopic basin nut wrench 315 VDE screwdriver set 311
Telescopic workbench 328
Telescoping guide tubes 233 W
Thread interfaces 51 Water extraction systems 52
Threading dies 134 Water pump pliers SP 298
Tool bag 329 Water pump pliers type SPK 299
Tool bag universal 329 Water supply 52
Tool bag, small 329 WC-BLITZ RO-3 toilet auger 224
Tool set Climate I + II 277 Welding blanket 173
Tool set L 241 Welding goggles EN 166 172
Tool set S 241 Working unit 328
Toolbox apprentice 329
Toolkit sets 318
Torch spanner 172
97, 286,
Torque wrench set
308
TP 25 185
Trendy shoulder toolbox 329
Trendy tool bag 329
Trimmer adaptor P 160 SANILINE 261
Tripod stand 232
Tripod uni workbench 328
TUBE BENDER 58
TUBE BENDER MAXI 59
TUBE BENDER MAXI MSR 60
TUBE CUTTER 30 PRO / 50 17
TUBE CUTTER 30 PRO INOX 18
TUBE CUTTER 35 / 42 Pro 14
TUBE CUTTER 35 / 42 PRO INOX 19
TUBE CUTTER 35 DURAMAG
15
counter display
TUBE CUTTER 35 MSR /
27
42 PRO MSR /42 PRO PVC
TUBE CUTTER 42 XL 15
TUBE CUTTER 67 / 125 / 168 PL
26
Automatic
TUBE CUTTER CSST 19
TUBE CUTTER INOX 19
TURBOPROP 157
Two-way root cutter 236, 240
U
UNI small saw PUK 28
UNI stepped key set 306
UNICUT HM 319
UNIDRILL 320
UNIDRILL Automatic 28/42 92
15
Universal flaring tool 96
337
Index
Numerical
No. Page No. Page No. Page No. Page No. Page
015282X 117 015392X 116 070031D 26 070917X 134

0 015283X 116 - 121 015393H 115 - 121 070046D 20, 21 070918X 134
015060X 113 015284X 116 - 121 015393X 115 - 121 070051D 20, 21 070919X 134
015062X 113 015291X 116 015394X 116 15, 18, 070920X 134
070056D
015063X 113 015292X 116 015395X 115 - 121 19, 21 070921X 134
015068X 113 015293X 116 015396X 116 070057D 17, 21 070945X 134
015072X 113 015294X 116 015397X 116 070061D 20, 21 070946X 134
015080X 113 015302X 116 - 121 015398X 115 - 121 070088D 20, 21 071533D 322
015101X 115 - 121 015304X 116 - 121 015399X 115 - 121 070089D 20, 21 071534D 322
015102X 115 - 121 015306X 116 - 121 015401X 115 - 121 070110X 301 072070X 222
015103X 115 - 121 015307X 116 - 121 015530X 116 - 121 070111X 301 072185F 239
015104X 115 - 121 015308X 116 - 121 015531X 116 - 121 070112X 301 072945X 242
015105X 115 - 121 015311X 116 - 121 015532X 116 - 121 070121X 301 072955X 242
015106X 115 - 121 015312X 116 - 121 015533X 116 - 121 070122X 301 072956X 242
015151X 115 - 121 015313X 116 - 121 015534X 116 - 121 070123X 301 072962X 242
015152X 115 - 121 015314X 116 - 121 015580X 116 - 121 070124X 301 072967X 242
015153X 115 - 121 015315X 116 - 121 015581X 116 - 121 070130X 300 088840D 18
015154X 115 - 121 015317X 116 - 121 015582X 116 - 121 070131X 301 088841D 18
015155X 115 - 121 015318X 116 - 121 015583X 116 - 121 070132X 301 088842D 18
015161X 115 - 121 015321X 115 - 121 01700RD 278, 286 070133X 301
015162X 115 - 121 015322X 115 - 121 023020X 59 070134X 301 1
015163X 115 - 121 015323X 115 - 121 023021X 59 070135X 300 11004 83
015164X 115 - 121 015324X 115 - 121 023022X 59 070140X 300 11006 32
015180X 115 - 121 015325X 115 - 121 023090X 59 070188D 21, 27 11007 84, 87
015181X 115 - 121 015326X 115 - 121 023091X 59 070522D 299 11008 82
015182X 115 - 121 015327X 115 - 121 035510-A/-B 155 070528D 298 11010 82
015183X 115 - 121 015328X 115 - 121 035521-A 154, 166 070690X 328 11012 82
015211X 115 - 121 015329X 115 - 121 035521-B 154 070699X 328 11014 82
015212X 115 - 121 015330X 115 - 121 035521-C 154 070705X 327 11015 82
015213X 115 - 121 015331X 115 - 121 035570-A/-B 155 070735X 327 11016 82
015214X 115 - 121 015333X 115 - 121 035648X 149, 151 070780X 127 11018 82
015215X 115 - 121 015334X 115 - 121 035780X 167 070781X 127 11020 82
015216X 115 - 121 015335X 115 - 121 035901-A/-B 155 070790X 127 11022 82
015217X 115 - 121 015336X 115 - 121 045268D 173 070821X 134 11028 82
015218X 115 - 121 015337X 115 - 121 052005D 23 070822X 134 11032 82
015219X 115 - 121 015338X 115 - 121 053890X 253 070823X 134 11035 82
015220X 115 - 121 015339X 115 - 121 053891X 253 070824X 134 11038 82
015222X 115 015351X 116 - 121 053892X 253 070825X 134 11040 82
015223X 115 015352X 116 - 121 053893X 253 070826X 134 11042 82
015224X 115 015353X 116 - 121 053894X 253 070831X 134 11044 33
015225X 115 015354X 116 - 121 053896X 253 070832X 134 11045 33
015226X 115 015355X 116 - 121 053897X 253 070833X 134 11052 82
015227X 115 015357X 116 - 121 055053D 21, 25 070834X 134 11053 82
015230X 116 - 121 015358X 116 - 121 055054D 21, 25 070835X 134 11054 82
015231X 116 - 121 015362X 116 - 121 055074D 21, 25 070836X 134 11055 82
015232X 116 - 121 015364X 116 - 121 056370X 140 070840X 129 11056 82
015233X 116 - 121 015366X 116 - 121 056371X 140 070842X 134 11057 82
015234X 116 - 121 015367X 116 - 121 057950X 66 070843X 134 11058 82
015260X 115 - 121 015368X 116 - 121 057961X 66 070849X 134 11059 82
015261X 115 - 121 015370X 115 - 121 057966X 66 070850X 134 11062 82
015262X 115 - 121 015371X 115 - 121 057969X 68 070869X 134 11063 82
015263X 115 - 121 015374X 115 - 121 057972X 68 070870X 134 11078 85
015264X 115 - 121 015376X 115 - 121 057973X 68 070891X 127 11086 85
015265X 115 - 121 015377X 115 - 121 070007D 16, 21 070892X 127 11087 85
015269X 115 - 121 015378X 115 - 121 070007X 16 070908X 134 11089 85
015271X 116 - 121 015379X 115 - 121 070017D 16, 17, 21 070912X 134 11093 85
015277X 116 - 121 015380X 115 - 121 070027(C) 21 070913X 134 11323 84
015280X 116 - 121 015385X 115 - 121 070027C 15 070914X 134 11325 84
15
015281X 116 - 121 015389X 115 - 121 070027DB 15 070915X 134 11328 84
015282X 116 - 121 015391X 115 - 121 070028D 21, 27 070916X 134 11332 84
338
Index
Numerical
11335 84 12526 81 15705 109 1000000224 97 1000001431 61

11336 84 12535 81 15730 109 1000000225 97 1000001500 114
11342 84 12536 81 15740 109 1000000230 94 1000001501 114
11346 84 12537 81 15750 109 1000000231 94 1000001502 113
11348 84 12538 81 15760 109 1000000235 115 -121 1000001545 71
11358 84 12541 81 19166 330 1000000236 115 -121 1000001548 71
11362 84 12601 89 111405 324 1000000328 297 1000001549 71
11364 84 12602 89 111406 324 1000000383 264 1000001550 71
11376 84 12604 89 111411 324 1000000442 191 1000001551 71
11380 84 12605 89 111413 324 1000000445 61 1000001552 71
11400 83 13002 86 111418 324 1000000529 166 1000001553 71
11955 84 13100 86 111419 324 1000000532 250 1000001554 71
11958 84 14000 35 111424 324 1000000539 275 1000001559 71
11962 84 14005 35 111426 324 1000000540 275 1000001561 72
11968 84 14121 35 111429 51, 324 1000000541 275 1000001563 72
11975 84 14122 35 111432 324 1000000558 166 1000001565 71
11978 84 14123 35 111439 324 1000000563 265 1000001566 71
12001 87 14124 35 111440 324 1000000569 275 1000001567 71
12013 86 14126 35 111447 324 1000000570 275 1000001630 151
12017 87 14250 35 111450 324 1000000572 275 1000001647 316
12018 87 14707 115 - 121 111452 324 1000000620 166 1000001648 320
12078 87 14708 115 - 121 111455 324 1000000627 166 1000001649 321
12080 87 14709 115 - 121 168605 282 1000000629 166 1000001650 323
12097 87 14822 115 - 121 168713 282, 283 1000000631 171 1000001651 324
12400 80 14823 115 - 121 169200 281 1000000633 171 103, 105,
1000001652
12408 82 14824 115 - 121 170016 273, 286 1000000642 166 107, 325
12410 82 14825 115 - 121 170501 276 1000000720 142 103, 105,
12412 82 14826 115 - 121 170502 276 1000000721 142 1000001653 107, 211,
12414 82 14832 116 - 121 170545 276 1000000722 142 325
12415 82 14833 116 - 121 170546 276 1000000723 142 103, 105,
12416 82 14834 116 - 121 170547 276 1000000743 166 1000001654 107, 211,
12418 82 14835 116 - 121 170600 276 1000000762 171 325
12420 82 14836 116 - 121 170601 276 1000000764 171 103, 105,
1000001691
12422 82 14837 116 - 121 170602 276 1000000842 205 107
12428 82 14838 116 - 121 170604 277 1000000850 142 1000001711 230
12432 82 14842 115 - 121 170605 277 1000000860 204 1000001712 230
12435 82 14843 115 - 121 170606 276 1000000861 206 1000001713 230
12438 82 14844 115 - 121 170607 276 1000000999 256 1000001714 230
12440 82 14845 115 - 121 170608 276 1000001000 256 1000001727 231
12442 82 14846 115 - 121 170912 284 1000001001 108 1000001728 231
12452 82 14847 115 - 121 170913 284 1000001039 300 1000001729 231
12453 82 14848 115 - 121 170931 284 1000001068 300 1000001730 231
12454 82 14849 112 170932 284 1000001126 114 1000001731 231
12455 82 14852 116 170950 286 1000001134 216 1000001732 231
12456 82 14853 116 171505 276 1000001231 281 1000001734 324
12457 82 14854 116 173204 286 1000001245 253 1000001738 71
12458 82 14855 116 173205 286 1000001256 229 1000001745 330
12459 82 14863 115 - 121 173206 286 1000001257 229 1000001747 19
12462 82 14864 115 - 121 97, 286, 1000001273 113 - 121 1000001748 15
175001
12463 82 14865 115 - 121 308 1000001274 113 - 121 1000001762 222
12500 81 14866 117 - 121 1000000046 16 1000001275 229 1000001786 105
12503 81 14867 115 - 121 1000000124 115 1000001276 229 1000001807 113
12505 81 14868 115 - 121 1000000125 115 1000001308 229 1000001808 113
12509 81 14869 112 1000000138 273 1000001391 114, 115 1000001810 113, 115
12511 81 14882 116 - 121 1000000145 217 1000001392 114, 115 1000001811 113, 115
12517 81 14883 116 - 121 1000000173 115 - 121 1000001393 114, 115 1000001840 107
12518 81 14884 116 - 121 1000000190 217, 218 1000001394 114, 115 1000001856 107
12521 81 14885 116 - 121 1000000212 142 1000001425 330 1000001877 108
15
12522 81 14886 116 - 121 1000000222 94 1000001426 276 1000001879 107
12524 81 14895 112 1000000223 94 1000001427 276 1000001898 105
339
Index
Numerical
1000001923 107 1000002298 225 1300005048 91 1500001299 329 1500002856 190

1000001924 107 1000002299 225 1300005049 91 1500001320 329 1500002857 190
1000001925 107 1000002307 103 1300005050 91 1500001324 224 1500002869 152
1000001926 107 1000002358 152 1300005051 91 1500001351 143 1500002876 189
1000001927 107 1000002359 153 1300005052 91 1500001352 143 1500002921 153
1000001932 107 1000002360 153 1300005054 91 1500001353 143 1500002922 153
1000001955 333 1000002364 151 1300005055 91 1500001355 151 1500003000 195
1000001959 109 1000002366 151 1300005056 91 1500001509 309 1500003001 196
1000001989 104 1000002368 151 1300005057 91 1500001510 309 1500003163 314
1000002002 15 1000002369 149 1300005058 91 1500001547 313 1500003164 314
1000002011 133 1000002370 149 1300005059 91 1500001548 313 1500003166 314
1000002016 133 1000002371 149 1300005060 91 1500001583 313 1500003167 314
1000002035 316 1000002399 281 1300005061 91 1500001711 143 1500003168 314
1000002036 320 1000002400 105 1300005062 91 1500001990 143 1500003169 314
1000002037 321 103, 105, 1300005063 91 1500002182 329 1500003170 304
1000002548
1000002038 323 107, 325 1300005064 91 1500002230 329 1500003296 209
1000002065 113 103, 105, 1300005065 91 1500002239 332 1500003381 286
1000002549
1000002067 113 107, 325 1300005067 91 1500002241 279 1500003464 322
1000002068 113 1000002560 274 1300005506 331 1500002253 231 1500003465 322
1000002069 113 1000002561 274 1500000024 277 1500002254 231 1500003517 217
1000002077 19 1000002625 332 1500000025 277 1500002255 231 1500003535 190
1000002085 211 1000002627 333 1500000026 277 1500002256 231
1000002108 332 1000002628 333 1500000027 277 1500002257 231 2
1000002109 332 1000002630 255 1500000028 277 1500002258 231 21300 319
1000002111 103 1000002631 255 1500000029 277 1500002259 231 21307 320
1000002112 103 1000002655 111 1500000030 277 1500002260 231 21313 320
1000002113 103 1000002683 107 1500000031 277 1500002261 231 21316 319
1000002114 103 1000002697 296 1500000032 277 1500002262 231 21329 319
1000002115 103 1000002698 296 1500000052 205 1500002263 231 21334 319
1000002116 103 1000002699 296 1500000057 206 1500002264 231 21335 319
1000002117 103 1000002700 296 1500000087 329 1500002265 231 21395 319
1000002118 103 1000002701 296 1500000115 220 1500002266 231 21500 26
1000002119 103 1000002702 296 1500000116 220 1500002267 231 21505 26
1000002120 103 1000002704 296 1500000117 220 1500002268 231 21575 92
1000002121 104 1000002705 296 1500000120 211 1500002271 231 21583 92
1000002123 103 1000002713 281 1500000122 210 1500002449 332 21651 34
1000002124 103 1000002714 281 1500000123 210 1500002450 332 17, 19, 21,
21652
1000002125 104 1000002809 103 1500000134 143 1500002453 317 34
1000002134 112 1000002945 104 1500000135 221 1500002454 317 21655 20, 34
1000002135 112 1000002946 104 1500000136 221 1500002613 208 21660 34, 20
1000002136 112 1000002947 116 1500000157 218 1500002614 208 22010 91
1000002180 318 1000002949 116 1500000200 218 1500002615 209 22012 91
1000002181 318 1000002950 116 1500000201 218 1500002616 209 22014 91
1000002182 318 1000002952 116 1500000202 218 1500002637 283 22015 91
1000002188 300 1000002964 260 1500000203 217, 218 1500002641 332 22016 91
1000002189 300 1000002970 261 1500000236 20, 32 1500002677 186 22018 91
1000002190 15 1000002971 261 1500000237 32, 20 1500002763 332 22028 91
1000002191 16 1000003199 191 1500000439 233 1500002824 323 22035 91
1000002192 19 1200000526 250 1500000696 204 1500002825 323 22038 91
1000002193 23 1300003334 331 1500000789 250 1500002826 323 22042 91
1000002194 302 1300003336 331 1500000790 250 1500002827 323 22050 91
1000002207 104 1300003337 331 1500000792 250 1500002828 323 22054 91
1000002222 15, 19 1300003338 331 1500000793 250 1500002829 323 22060 91
1000002242 103 1300003541 331 1500000794 250 1500002845 189 22061 91
1000002262 143 1300003542 65 1500000795 250 1500002846 189 22062 91
1000002263 143 1300003649 331 1500000817 211 1500002847 189 22063 91
1000002264 143 1300004002 65 1500000914 220 1500002848 189 22064 91
1000002266 111 - 121 1300005045 91 1500000922 190 1500002851 189 22065 91
15
1000002267 111 - 121 1300005046 91 1500001235 221 1500002852 189 22066 91
1000002268 202 1300005047 91 1500001236 221 1500002853 189 22068 91
340
Index
Numerical
22080 92 24519 65 25685 72 31042 173 35403 168

22100 90 24522 65 26001 93 31043 173 35436 149
22101 90 24552 65 26002 93 31050 173 35475 169
22102 90 25075 65 26003 93 31090 157 35476 169
22103 90 25076 65 26004 93 31091 156 35477 169
22109 90 25078 65 26005 93 31092 156 35479 169
22111 90 25120 63, 65 26010 93 31094 157 35480 169
22121 90 25130 62 26011 93 32075 158 35486 158
22124 90 25131 62 26013 93 32077 158, 171 35487 158
22126 90 25132 62 26015 93 32081 160 35488 158
22127 90 25133 62 26016 93 32088 158, 171 35489 158
22135 90 25134 62 26017 93 32098 158 35580 167
23001 59 25135 62 26020 96 32099 158 35585 167
23002 59 25136 62 27180 92, 306 32201 160 35611 176
23003 59, 60 25137 62 27181 92 32207 161 35629 165
23004 59 25140 62 222401 95 32223 160 35634 171
23005 59, 60 25142 62 222402 95 33079 161 35635 170
23006 59 25150 62 222403 95 33310 160 35636 161
23007 59 25151 62 222412 95 33311 170 35651 167
23008 59 25181 63 222413 95 35012 152 35655 165
23009 60 25182 63 222601 96 35016 152 35695 167
23010 59 25183 63 224500 287 35178 170 35697 167
23011 59 25185 63 252100 313 35179 170 35698 166
23012 59 25186 63 259008 278 35188 170 35750 166, 170
23013 59 25190 63 259010 278 35189 170 35782 167
23014 59 25308 65 259060 278 35199 171 35785 167
23047 59 25310 65 211111116 160 35210 170 35794 171
23050 60 25312 65 211121116 160 35221 170 35798 168
23051 60 25313 65 221031500 157 35222 170 35800 169
23052 60 25314 65 221131416 156 35223 170 35925 161
23053 60 25315 65 221131616 156 35300 164 36700 163
23065 60 25316 65 221131916 156 35303 164 36702 163
23076 60 25318 65 221132216 156 35304 164 36710 163
23080 60 25319 65 223090916 159 35305 164, 165 36711 163
23083 60 25322 65 223214500 159 35306 164, 165 36715 163
23095 60 25401 61 223215100 159 35307 164, 165 36720 163
24001 58 25402 61 223215700 159 35308 164, 165 36721 163
24006 58 25403 61 231010000 159 35309 164, 165 300013 28
24007 58 25404 61 232010000 159 35311 164, 165 310411 261
24008 58 25405 61 233510000 159 35312 164, 165 321216 259
24010 58 25406 61 236010000 159 35313 164, 165 321218 259, 263
24048 58 25441 63 242206000 160 35314 164, 165 322823 326
24049 58 25442 63 252010000 159 35315 164, 165 322922 326
24131 58 25443 63 263005600 167 35324 169 323126 311
24132 58 25444 63 263005800 167 35325 169 350850 304
24133 58 25445 63 35326 169 350900 304
24134 58 25446 63 3 35327 169 351043 306
24500 65 25612 72 30101 160 35328 169 351044 306
24501 65 25614 72 30102 160 35329 169 351050 315
24502 65 25615 72 30913 156 35334 169 351220 189
24503 65 25616 72 30914 156 35338 169 351221 189
24504 65 25618 72 30915 156 35339 169 351222 189
24505 65 25619 72 30916 156 35341 169 351223 189
24508 65 25620 72 30922 156 35344 169 351225 189
24510 65 25622 72 30925 160 35345 169 351226 189
24512 65 25625 72 30927 160 35347 169 351227 189
24514 65 25626 72 30954 159 35348 169 351228 189
24515 65 25628 72 30957 159 35354 170 351231 189
15
24516 65 25652 72 31032 157 35400 168 351232 189
24518 65 25684 72 31037 157 35401 168 351233 189
341
Index
Numerical
351257 189 52031 23 55015 23 55592 251 56057 137

351260 189 52040 23 55019 25 55593 251 56058 140
351261 189 52041 23 55020 25 55594 251 56059 140
351262 189 52042 23 55021 25 55595 251 56060 141
351263 189 53200 257 55022 25 55596 251 56061 141
351265 189 53210 257 55023 25 55597 251 56062 141
351271 189 53220 257 55024 25 55598 251 56063 141
351272 189 53240 257 55025 25 55684 261 56064 141
53250 257 55026 25 55685 261 56065 141
4 53251 257 55027 25 55686 261 56076 140
40005 178 53252 257 55029 25 55717 263 56077 140
40015 178 53253 257 55030 25 55718 263 56081 140
40094 177 53254 257 55031 25 55719 263 56082 140
40202 177 53255 257 55032 25 55721 263 56083 140
40212 177 53256 257 55033 25 55742 263 56085 140
40213 177 53258 257 55035 24 55743 263 56088 140
40500 176 53259 257 55047 25 55744 263 56097 140
40502 178 53260 257 55048 25 55745 263 56098 140
40512 176 53261 257 55050 267 55746 263 56104 140
40514 176 53262 257 55051 267 55747 263 56110 140
40515 176 53263 257 55058 267 55748 263 56111 140
40518 176 53272 257 55063 24 55749 263 56112 140
40522 176 53273 257 55075 305 55750 263 56114 140
40528 176 53274 257 55076 305 55751 263 56118 140
44915 179 53275 257 55119 259 55752 263 56121 140
44916 179 53276 257 55120 259 55753 263 56122 140
44917 179 53277 257 55121 259 55759 263 56133 140
45055 179 53278 257 55122 259 55768 262 56135 140
45056 179 53279 257 55124 259 55787 259 56150 139
45220 175 53280 257 55125 259 55795 262 56153 140
45225 175 53281 257 55126 259 55807 259 56156 140
45250 175 53282 257 55127 259 55808 259 56162 140
45252 175 53283 257 55128 259 55809 259 56163 140
45255 175 53285 257 55129 259 55826 259 56164 140
45257 175 53511 253 55130 259 55832 259 56165 140
45266 175 53512 253 55132 259 55844 258 56166 140
45268 105, 173 53513 253 55133 259 55851 251, 261 56175 139
402308 329 53514 253 55134 259 55854 251, 263 56180 140
402311 329 53515 253 55152 259 55918 259 56181 140
402312 329 53516 253 55163 263 55924 258 56183 140
462212 61 54005 261 55199 259 56001 140 56184 140
462215 61 54020 263 55316 251, 261 56003 140 56185 140
462218 61 54040 261 55317 251, 263 56006 140 56186 140
462222 61 54080 261 55318 259 56007 140 56187 140
54082 261 55319 259 56008 140 56188 140
5 54083 261 55321 251 56009 140 56189 140
50260 31 54084 261 55324 259 56010 140 56190 140
50261 31 54085 261 55505 250 56011 140 56191 140
50263 31 54086 261 55517 251 56012 140 56198 139
50264 31 54087 261 55518 251 56013 140 56199 139
50265 31 54088 261 55524 251, 259 56032 140 56200 139
50266 31 54089 261 55536 251 56045 137 56235 140
50301 30 54090 261 55539 251 56047 141 56236 140
52000 23 54091 261 55546 251 56049 137 56237 140
52005 23 54950 25 55585 251 56050 137 56238 140
52010 23 54960 25 55587 251 56051 137, 261 56250 139
52011 23 54961 25 55588 251 56052 140 56253 139
52015 23 55005 23 55589 251 56053 140 56254 139
15
52016 23 55006 23 55590 251 56054 140 56255 139
52030 23 55007 23 55591 251 56056 141 56266 140
342
Index
Numerical
56268 140 58012 67, 69 62291 197 70150 302 70266 303
56269 140 58013 67, 69 65000 191 70151 302 70267 303
56271 140 58014 67, 69 65008 135 70152 302 70268 305
56288 140 58015 67, 69 65010 135 70153 302 70269 305
56289 140 58016 67, 69 65013 135 70154 302 70271 308
56291 140 67, 69, 65015 135 70155 302 70272 308
58182
56294 140 232 69111 211 70156 302 70274 308
56295 140 58185 67, 69 69112 211 70157 302 70276 308
56296 140 69113 211 70158 302 70285 17, 21
56310 140 6 69117 211 70159 302 70286 17, 21
56315 140 60200 183 69118 211 70160 302 70289 141
56335 141 60201 183 69119 211 70161 302 70296 141
56351 140 60203 183 69601 204 70162 302 70340 19, 21
56352 140 60250 185 69603 204 70163 302 70341 19, 21
56353 140 60251 185 69615 204 70166 303 70350 302
56355 140 60999 183 70167 303 70351 302
56358 140 61001 184 7 70168 302 70352 302
56369 140 61011 189 70006 21 70169 302 70353 302
56372 140 61014 189 70010 16, 21 70189 302 70354 302
56373 140 61017 189 70011 16, 21 70190 302 70355 302
56374 140 61018 189 70015 16, 21 70191 302, 303 70356 302
56379 140 61030 189 70023 21 70192 302, 303 70374 302
56380 140 61041 189 70027 15, 105 70193 302 70375 302
56465 139 61100 219 70029 15, 21 70194 302, 303 70376 302
56466 139 61105 220 70030 17, 21 70195 302 70377 302
56475 139 61106 220 70031 21, 26 70196 302 70378 302
56488 137, 139 61115 220 70032 21, 26 70197 302 70379 302
56500 141 61120 220 70033 21, 26 70198 302 70380 302
56501 141 61130 185 70040 20, 21 70199 302 70401 16, 21
56504 142 61185 184 16, 17, 70200 302 70402 16, 21
70041
56505 142 61186 184 18, 21 70201 302, 303 70413 307
56506 142 61190 219 70042 17, 21 70202 302 70414 307
56507 142 61316 183 70045 20, 21 70203 302, 303 70415 304
56508 142 61340 190 70047 21 70204 302, 303 70416 304
56509 142 61352 190 70052 21 70205 302 70418 308
56510 142 61353 190 70053 20, 21 70206 302 70419 308
56511 142 61358 190 70055 15, 19, 21 70207 302 70420 308
56512 142 61700 188 70060 20, 21 70208 302 70421 308
56514 142 61701 188 70063 21 70220 309 70422 308
56521 142 61702 189 70064 20, 21 70221 309 70423 308
56522 142 62211 197 70065 17, 21 70222 309 70424 308
56523 142 62212 197 70067 21 70223 309 70425 308
56604 29 62213 197 70068 21 70225 315 70426 308
56605 29 62214 197 70070 15, 19, 21 70226 315 70427 308
56608 29 62215 197 70072 15, 21, 27 70227 315 70439 307
56710 29 62216 197 70074 137 70228 313 70441 287, 309
56711 29 62217 197 70080 16, 21 70235 303 70442 287, 309
57050 139, 143 62219 197 70081 21 70240 305 70443 287, 309
57979 67, 69 62221 197 70086 20, 21 70241 305 70444 287, 309
57981 67, 69 62224 197 70087 20, 21 70242 303 70445 287, 309
57983 67, 69 62226 197 70105 16, 21 70243 303 70490 307
57985 67, 69 62227 197 70108 15, 21, 27 70244 303 70521 299
57986 67, 69 62230 195, 196 70109 15, 21, 27 70245 303 70522 299
57987 67, 69 62231 197 70113 301 70246 303 70523 299
57988 67, 69 62232 197 70114 301 70247 303 70527 298
57989 67, 69 62233 197 70115 303 70250 305 70528 298
57990 67, 69 62234 197 70116 303 70257 305 70529 298
57991 67, 69 62235 197 70125 301 70263 303 70545 304
15
58010 67, 69 62236 197 70142 17, 21 70264 303 70548 304
58011 67, 69 62237 197 70148 302 70265 303 70571 303
343
Index
Numerical
70572 303 71296 318 72186 239 72422 243 77050 326
70573 303 71297 318 72187 239 72423 243 77397 313
70574 303 71299 318 72188 239 72424 243 77506 245
70575 303 71300 318 72193 240 72425 225 78551 224
70591 299 71301 318 72203 237 72428 235 701011500 20, 21
70592 299 71302 318 72208 237 72431 235 750004100 17
70593 299 71303 318 72210 243 72433 235 751004200 17, 21
70600 129 71304 318 72211 243 72435 235 753000700 21
70623 329 71305 318 72221 237 72441 235 762955300 72
70661 312 71310 318 72222 237 72442 235 762955700 72
70665 312 71311 318 72223 240 72443 235 766004016 58
70667 312 71450 131 72224 240 72444 235 766100016 59
70670 327 71451 131 72226 240 72451 235 767050016 61
70671 327 71453 131 72227 240 72452 235 767750016 61
70672 327 71454 131 72228 240 72453 235 775004000 67, 69
70696 328 71470 131 72229 238 72455 235 775504100 67, 69
70698 328 71975 224 72234 238 72460 243
70700 327 71976 224 72250 240 72461 243 8
70710 327 71991 222 72251 240 72463 243 80679 21
70711 327 72003 224 72261 238 72490 235 85800 286
70712 327 72005 223 72263 237 72494 224 87800 287
70713 327 72016 224, 229 72264 237 72514 232 88812 18
70714 327 72071 222 72265 240 72515 232 88815 18
70715 327 72072 222 72266 240 72522 243 88818 18
70721 327 72073 222 72275 238 72536 232 88822 18
70722 327 72090 223 72276 238 72538 232 88832 18
70731 327 72095 223 72277 238 72540 232 89501 286
70732 327 72100 233, 235 72278 239 72541 232 89503 286
70733 327 72101 233 72284 239 72542 225 510105 172
70734 327 72102 233 72285 239 72559 232 510106 172
70740 328 72110 233 72286 239 72561 232 511427 171
70751 142, 328 72111 233 72289 239 72562 232 511428 171
70752 328 72112 233 72295 240 72563 232 520849 158
71019 17, 21 72120 233 72299 239 72638 232 520850 158
71085 18, 21 72121 233 72321 237 72666 232 520856 158
71095 315 72130 233 72322 237 72686 226 520857 158
71206 28 72135 233 72324 240 72687 226 520865 158
71213 28 72140 233 72325 237 72688 227 520866 158
71215 28 72142 233 72326 240 72689 227 520867 158
71216 28 72150 243 72327 240 72820 245 530250 172
71217 28 72151 243 72328 240 72915 232 530310 172
71222 28 72154 238 72329 238 72918 231 540360 171
71250 133 72158 237 72341 239 72936 241 540365 171
71251 133 72159 237 72348 239 72937 241 540620 172
71256 133 72161 237 72350 240 72938 241 540621 172
71257 133 72162 237 72351 240 72939 241 540622 172
71258 133 72163 237 72360 238 72942 225 540625 172
71259 133 72164 238 72363 237 73280 306 540626 172
71271 134 72165 237 72365 240 73297 306 540627 172
71272 129 72166 238 72366 240 73298 306 540640 172
71286 318 72168 240 72375 238 73570 310 540675 172
71287 318 72169 238 72376 238 73571 310 540850 172
71288 318 72170 238 72377 238 73575 311 540851 172
71289 318 72171 238 72398 240 74629 204, 205 540855 172
71290 318 72172 240 72412 243 76020 244 561351 173
71291 318 72175 238 72413 243, 245 76065 245 816990 317
71292 318 72176 238, 240 72414 243 76068 245 842100 28
71293 318 72177 238 72415 243 76070 244 854181 173
15
71294 318 72178 238 72420 243 76088 245 854183 173
71295 318 72185 239 72421 243 76089 245 854185 173
344
Index
Numerical
No. Page No. Page No. Page No. Page
854186 173 FF00645 50 FF44060 49 R2403500 58

854187 173 FF00650 50 FF44070 49 R6112500 183, 185
854390 312 FF00655 50 FF44080 49 R7128100 318
856907 329 FF00660 50 FF44090 49 R7128200 318
856911 329 FF00665 50 FF44100 49 R7128300 318
865784 31 FF00670 50 FF44110 49 R7128400 318
865785 31 FF00675 50 FF44120 49 R7128500 318
865786 31 FF00680 50 FF44130 49
865787 31 FF00690 50 FF44140 49 V
865788 31 FF00700 50 FF44150 49 V12102000 184
865789 31 FF00705 50 FF44160 49 V12110016 184
865793 31 FF00710 50 FF44170 49
865795 31 FF00720 50 FF44180 49
865796 31 FF00725 50 FF44200 49
865798 31 FF00730 50 FF44220 49
865799 31 FF30030 47 FF44250 49
865008700 131 FF30150 43 FF44300 49
FF30250 45 FF44620 49
9 FF34150 43 FF44630 49
996277400 67, 69 FF34160 43 FF44640 49
FF34200 45 FF44650 49
F FF34260 45 FF44660 49
F80053 91 FF34500 47 FF44670 49
F80054 91 FF35015 51 FF44680 49
FF00020 50 FF35028 52 FF44690 49
FF00025 50 FF35040 52 FF44700 49
FF00030 50 FF35045 52 FF44710 49
FF00040 50 FF35050 52 FF44720 49
FF00045 50 FF35055 52 FF44730 49
FF00050 50 FF35060 52 FF44806 48
FF00055 50 FF35065 52 FF44808 48
FF00065 50 FF35070 52 FF44810 48
FF00070 50 FF35075 52 FF44812 48
FF00075 50 FF35080 51 FF44814 48
FF00090 50 FF35092 51 FF44815 48, 51
FF00100 50 FF35093 51 FF44816 48
FF00105 50 FF35095 51 FF44818 48
FF00110 50 FF35120 51 FF44820 48, 51
FF00120 50 FF35121 51 FF44822 48
FF00130 50 FF35122 51 FF44824 48
FF00140 50 FF35126 51 FF44830 48
FF00150 50 FF35129 51 FF44835 48
FF00160 50 FF35130 51 FF44840 48
FF00200 50 FF35144 53 FF44850 48
FF00250 50 FF35190 51 FF44855 48
FF00280 50 FF35200 51 FF44860 48
FF00300 50 FF35301 52 FF44867 48
FF00350 50 FF35302 52 FF50007 51
FF00500 50 FF35700 52 FF50008 51
FF00610 50 FF35710 51 FF55131 52
FF00612 50 FF35730 52 FF55201 52
FF00616 50 FF35740 51 FF55374 53
FF00618 50 FF40056 53 FF55388 53
FF00620 50 FF40150 41
FF00624 50 FF40165 43 R
FF00625 50 FF40220 43, 45 R17300416 285
FF00630 50 FF40400 45, 47 R2301500 59
FF00632 50 FF44030 49 R2403200 58
15
FF00638 50 FF44040 49 R2403300 58
FF00640 50 FF44050 49 R2403400 58
345
Legend
Abbreviations
Abbreviation Description
A/S Acetylene / Oxygen
ABS Acrylonitrile-Butadiene-Styrene
ADR Accord européen relatif au transport international des merchandises dangereuses par route (french)
AG Silver
AL Aluminium
AMS Acetylen-Maxigas-Oxygen
AS Non-slip
B Petrol, Gas
BGV Trade Associations Occupational Health and Safety Regulations
BSP British Standard Pipe, Standard Withworth Thread as per ISO 228-1, DIN 259
BSPP British Standard Pipe Parallel Thread, Cylindrical Pipe Thread as per ISO 7-1, EN 10226 (old DIN 2999)
BSPT British Standard Taper Pipe Thread
BSR Band Saw Pipe
BSW British Standard Parallel Screw: Thread of Whitworth Form B.S.W. B.S 84
BTU British Thermal Unit
CE European Community
CEN European Committee for Standardization
CFC Chlorofluorocarbons
CFM Cubic Feet per Minute
CFT Constant Force Technology
CL Channel Lock
CNC Computerized Numerical Control
CU Copper
DK Pressure Class
DN Diameter Nominal
DVGW German Association for Gas & Water Applications
DVS German Association for Welding
EAN European Article Number
EPT Enclosed Power Transmission
FE Iron
FS Guide Hose
G Cylindrical External Thread, EN-ISO 228-1
GW Gas / Water
HCFC Hydrochlorofluorocarbons
HD High Pressure
HFC Hydrofluorocarbons
HFCKW Virgin Hydro Chlorofluorocarbons
HFKW Virgin Hydroflurocarbons
HM Carbide
HRC Hardness Rockwell Cone
HSS High Speed Steel
HZ Hertz
IP International Protection
ISO International Organization for Standardization
Kcal Kilocalorie
KSO Capillary Gap Optimizer
15 L Large
LCD Liquid Crystal Display
346
Legend
Abbreviations
Abbreviation Description
LED Light Emitting Diode
MIM Metal Injection Molding
MPa Megapascals
MS Brass
MSR/MLP Multi-layered Composite Pipe
NM Newton Metre
NPT National Pipe Thread (Standard US - ASME B1.20.1)
PB Polybutylene
PD Power Driver
PD-E Power Drive-Electronic
PE Polyethylene
PEX Cross-linked Polyethylene
PL Plastic
PP Polypropylene
PS Professional
PSI Pound-Force per Square Inch
PVC Polyvinyl Chloride
PVDF Polyvinylidene Fluoride
RC RODIACUT
SAE Society of Automotive Engineers
SD-Card Secure Digital-memory Card
SDR Standard Dimension Ratio
SMK Spiral with Plastic Core
SML Super Metal Delivery Program
SP Standard Plier
SP Special Performance
SPK Standard Plastic Plier
SS Quick Cut
SW Spanner Size
TC Tube Cutter
TFT Thin-film Transistor
TiN Titanium Nitride Coating
TPI Bits per Inch
TRGI Technical Guidelines for Gas Installations
TRWI Technical Guidelines for Water Installations
TÜV Technical Inspection Association
UKS Obital Circular Saw
UNC Unified Coarse Threads
UNF Unified Fine Thread
VA (Stahl) Stainless Steel, Corrosion Resistant Steel
VCR Video Cassette Recording
VDE Registered Association of the Electrical, Electronic and Information Technology
VPE Packaging Unit
WG Hot Gas
ZN Zinc
ZPZ Bits per Inch
ZVSHK German Central Association Plumbing, Heating and Air Conditioning 15
347
Legend
Pictograms
Power supply
AC AC AC Three-phase Battery- Cable length

230 V 115 V 110 V current 400 V powered 5m
Battery + AC Cordless
Battery
operation Battery Alliance
charger
possible operation System 1)
Miscellanezous
Basic soft Max autogen

Can be used Can be used in Suitable for Hot brazing
soldering up welding
overhead confined spaces tight spaces 450 ° - 1100 °C
Basic to 450 °C Hot Max 1100 °C
No
Dry Wet Up to 50% Portable
Fast cut deformation
drilling drilling time-saving operation
from use
360° Fine adjustment

rotatable of the flame
Product features
Ergonomic Meets DIN VDE Propane Oxygen Acetylene

design standards approved control control control
Shock On / off LED Sturdy Extension of Piezo

absorption switch display casing hose possible ignition
Economy Pressure Inspection Pressure hose Emergency Lock

valve hose ball valve window length stop switch button
Pressure
Bayonet Pressure gauge Pressure
Push lock Thread lock gauge display
coupling class 1 - 6 gauge size
adjustable
Measuring
Filling Counter Balance Cable length Scale range
1g accuracy
supports display point in handle max. kg
up to g 5
Transport Heed safety Heed indus- With USB With video

Touchscreen
case warning trial safety connection function
USB
DURA DURA LAZR TEC 5-Year-

With photo ROCASE LAZR
SD Memory card WiFi TEC Laser hardening EXCHANGE
function Case system
process GUARANTEE2)
LASER HARDENING
WiFi ROTHENBERGER
eTOOL RO ROBOX
Product apps
for Android
Eco-friendly
15 (NFC tag) BOX Sorting system
and iOS
refrigerant
1)
348 2)
Detailed guarantee terms at rothenberger.com/de-de/5-jahres-umtauschgarantie
Legend
Pictograms
ROTHENBERGER Enclosed Power Transmision
The EPT-Technology (Enclosed Power Transmission) of the expander head offers the following technical benefits:
Concealed bent lever:

Protection against dirt and external mechanical damage
Energy efficient through optimised force transmission:
Ergonomic, highly optimised force flow in relation to the hand force of the user, therefore reducing effort
ROTHENBERGER Titannitrid coating

The golden TiN Coating (Titannitrid-coating) of the expander head offers the following technical benefits:
High durability 2,300 HV:

Protection against abrasive wear
Lower friction value compared to steel:
Less effort
Good chemical resistance:
Good protection against corrosion
Universal wear resistance:
Long-lasting
ROTHENBERGER Constant Force Technology

The CFT (Constant Force Technology)
guarantees a constant axial pressing force
over the entire service interval.
A very important requirement for the
production of sealed press connections
CFT guarantees:
ROMAX Compact TT
19 kN for 40,000 press cycles
ROMAX AC ECO
ROMAX 4000
ROMAX 3000 AC
ROTHENBERGER DURAMAG Technology

The DURAMAG Technology (High Tec Magnesium Body) offers the following benefits:
n Improved performance
n Higher stability with considerably lower weight
DURA = Durable MAG = Magnesium
DURAMAG
HI-Tec magnesium body
15

Packaging units Packaging unit
349
General conditions
for the sale of goods
General conditions for the sale of goods
Individually agreed sales and delivery terms supersede these GTCs in case of conflicts. For deliveries within Germany, please also note the Terms of Delivery and Payment set out on page 351.
§ 1 Scope case of a contract with a lengthy term, at least four months in the case of an objective approach, have not been culpably
after entering into the contract order-related costs increase or brought about by us. If agreement is reached such that a de-
1. These General Terms and Conditions of Sale apply to all busi- drop for us, in a manner that is verifiable and significant (more livery date, or a delivery period, has binding force and if such a
ness relations of ROTHENBERGER Werkzeuge GmbH, Industri- than 5 %) for reasons that are not our responsibility, e.g. as a date or period is exceeded by more than two months as a result
estraße 7, 65779 Kelkheim (“We” or “Us”) with our customers result of increased raw material prices or energy costs. of events of the aforementioned type, the Buyer shall be enti-
(“Buyer” or “Purchaser”). The General Terms and Conditions tled to withdraw from the contract in respect of the part that
of Sale shall only apply if the Buyer is an entrepreneur (Sec- 6. In the case of default in payment on the part of the Buyer has not yet been performed.
tion 14 BGB (German Civil Code)), a legal person under public or in the case of reasonable doubt about the Buyer's credit-
law or federal special funds. As a matter of principle, we do worthiness (including facts that already applied at the time of 5. In the case of so-called call-off orders, we may request a
not directly supply consumers (Section 13 BGB). entering into the contract) and which we were not aware of binding classification two weeks after confirmation of order.
or which we should have been aware of), we shall be entitled, If the Buyer fails to honour this request within three weeks,
2. The General Terms and Conditions of Sale apply, in particu- prior to further performing the contract, to request advance or if the Buyer defaults in acceptance, we shall be entitled to
lar, to contracts on the sale and/or delivery of movable prop- payment for outstanding services or request the provision of set an additional period of two weeks and once such a period
erty (“Goods”) without consideration given to whether or not security. Following the lapse in vain of a reasonable additional has lapsed withdraw from the contract and claim for damages.
we manufacture the Goods or purchase these from suppliers period for providing such securities, we shall be entitled (ir- Where not agreed to the contrary, as a matter of principle, de-
(Sections 433, 651 BGB). Unless agreed otherwise, the General respective of further statutory rights) to withdraw from the liveries ordered by way of a call-off are to be accepted within
Terms and Conditions of Sale apply as stated in the version as a contract. six months following confirmation of order.
framework agreement that is valid at the time the Buyer places
the order or, in any case, the version stated to the Buyer in text 7. Where the Buyer has authorised us to use SEPA direct deb- 6. Insofar as we are responsible for the failure to meet delivery
form, and applies to similar contracts in the future, without the iting, such a direct transfer order collection shall normally be dates that have been assured with binding force in exceptional
necessity of us having to refer to the conditions again in each announced in advance in conjunction with the invoicing at the cases, the Buyer shall be entitled to compensation of the prov-
individual case. latest 1 (one) calendar day prior to the due date of the direct en damage sustained by the Buyer as a result of the default
debit (pre-notification). but, however, in terms of amount limited at most to 0.5 % of
3. Our General Terms and Conditions of Sale apply exclusively. the Goods value that is in default for each full week of the de-
General terms and conditions of sale of the Buyer to the con- § 4 Setting off, right of retention fault and at most shall be entitled to 5 % of the Goods value
trary or those that vary from our conditions, or supplementary affected by the default. Compensation for further damage, in
conditions, shall only become an integral part of the contract The Buyer may only have the right to offset if its counterclaims particular the loss of expected profit and other indirect dam-
if and insofar as we have expressly consented to the validity have become res judicata, are not disputed or have been rec- age, is excluded in accordance with Paragraph 9 of these Gen-
of such conditions. This approval requirement shall apply in ognised by us. The Buyer shall only be entitled to exercise a eral Terms and Conditions of Sale.
any case, for instance including if the we unreservedly deliver right of retention insofar as its counterclaim is based on the
Goods to the Buyer although we are aware of the Buyer's gen- same contractual relationship. § 7 Shipping and passing of risk
eral terms and conditions of business.
§ 5 Scope of delivery, variation from the order, procure- 1. Unless agreed otherwise, all deliveries apply ex warehouse
4. Individual agreements entered into with the Buyer in indi- ment risk or ex works (see Paragraph 3 of these General Terms and Con-
vidual cases (including subsidiary agreements, supplementa- ditions of Sale), which is also deemed the place of performance
ry information and amendments) shall have preference over 1. Our written confirmation of order is authoritative in respect for potential subsequent performance. As a result, the Buyer is
these General Terms and Conditions of Sale. A written con- of the scope of delivery. Partial deliveries are permitted and responsible for transport/shipping and the risk of accidental
tract, or our written confirmation, shall be authoritative in re- shall be noted on the delivery note. loss or accidental deterioration shall pass to the Buyer upon
spect of the content of such agreements, subject to proof to handover to the carrier/the person otherwise determined in
the contrary. 2. Where special tools or parts are ordered, and production respect of performing the consignment.
based on a specific quantity is not economically possible, we
§ 2 Conclusion of contract shall be entitled to increase or decrease the order quantity in 2. Similarly, the risk of accidental loss/accidental deterioration
a manner that is customary in trade by up to 10 %, at least shall pass to the Buyer upon dispatch if we send the Goods to
1. All offers are subject to change without notice. Catalogue however by two items. The actual delivery quantity shall be the Buyer at the Buyer's request. We reserve the right to select
and leaflet details are only approximately authoritative. The charged. the transport route and the means of transport. We are enti-
right to make constructive amendments is reserved. Technical tled, but do not undertake, to insure deliveries in the name and
documentation (e.g. drawings, plans, calculations and refer- 3. Where products can only be delivered in a certain packag- on account of the Buyer.
ences to DIN standards) are not binding for us unless agreed ing unit and this minimum amount is not met by the order, we
otherwise. reserve the right to round up the order to the next packaging 3. The handover or acceptance shall continue to apply if the
unit or to impose a surcharge of 10% of the item order value. Buyer defaults in acceptance. In addition, in the event of de-
2. The Buyer shall be bound by its order for 4 weeks. The con- fault in acceptance we shall be entitled, but do not undertake,
tract of purchase shall be deemed entered into if the order has 4. We do not accept any procurement risk for the Goods to to store the Goods at the Buyer's cost and risk.
been accepted in writing within this period or the delivery has be delivered.
been performed. 4. In the event of a delivery stop as a result of default in pay-
5. The cost of deadfreight that is the responsibility of the Buyer ment or acceptance, or for another reason that is the Buyer's
3. Supplementary information, amendments and subsidiary or its shipping agent shall be borne by the Buyer. responsibility, the risk of the accidental loss/accidental deterio-
agreements are subject to written confirmation by us. ration shall pass to the Buyer at the latest upon notification of
§ 6 Delivery and performance time the readiness to dispatch.
§ 3 Prices; terms and conditions of payment
1. Binding delivery times must be expressly agreed upon as 5. Goods for which notice of readiness for dispatch has been
1. Unless agreed otherwise, the prices apply EXW (INCO- such in writing. Other delivery time details that are not express- given must be called-off without delay. Otherwise, we shall be
TERMS 2020), in relation to our respective stated location, ly agreed upon as binding are non-binding or approximate de- entitled to send the Goods at our discretion or store them at
without packaging, freight, postage, customs duties, sur- livery time details, and we shall endeavour to honour these. the Buyer's cost and risk.
charges and insurance etc., plus turnover tax. These costs shall
be charged separately. 2. In exceptional cases, binding delivery periods run from the 6. If acceptance is proposed or agreed, this is to be performed
date on which we confirm an order but not, however, before swiftly, following notification of the readiness for dispatch, at
2. In respect of orders that do not exceed a net order value of all order details, including the delivery, have been clarified and our respective, stated, supply plant. If acceptance is not per-
€ 250, a minimum quantity surcharge of 10% of the order val- all the preconditions to be met by the Buyer have been met. formed irrespective of the setting of a reasonable additional
ue applies, at least, however, € 10. Where the Buyer requests amendments after placing an or- period, or the Buyer waives acceptance, we shall be entitled
der, and we consent to the amendment, a new delivery period to send the Goods without acceptance or store them at the
3. Where advance payment is not agreed upon, payment is to shall start to run. Buyer's cost and risk.
be transferred to one of our stated accounts within 30 days
form the invoice date and without deductions. 3. The day of notification of the readiness for despatch shall § 8 Warranty
apply as the delivery day. Deliveries prior to expiry of the deliv-
4. In the event of default in payment on the part of the Buyer, ery time are permitted. 1. The warranty period is 12 months from the passing of
we shall claim at least the statutory default interest. This does risk. By contrast, the statutory period applies with respect
not affect additional claims for default, for example against 4. If events of so-called force majeure occur about which we to claims resulting from the German Product Liability Act or
merchants in respect of the commercial interest after the due furnish information in each case without delay, the delivery pe- claims attributable to the loss of life, physical injury or detri-
date (Section 353 of the German Commercial Code). riod shall be extended by the duration of the hindrance. Force mental effects on health. Wear-and-tear parts are excluded
majeure is equated with industrial disputes, official interven- from the guarantee. We shall not provide any quality guar-
15 5. Apart from cases of a fixed price agreement, the parties tion, energy and raw material shortages, operational hindranc- antees where an individual agreement has not been entered
undertake, at the request of a party, to agree, based on good es that are not our responsibility such as those caused by fire, into. Performing work under warranty does not constitute
faith principles, on an appropriate price correction if, in the water and machine damage and all other hindrances which, recognition or acceptance of a defect.
350
General conditions
for the sale of goods
2. Returns that are not based on a faulty object of sale are gal requirements. They do not apply if we have fraudulently The Buyer is to insure the reserved goods at replacement
not permitted. In the event that a return is permitted in an concealed a defect, in the case of guaranteed provided in an value and at its own cost, in particular against theft, water,
exceptional case as a result of an express, written agreement, exceptional case, to the Buyer's claims in accordance with the breakage, fire and other damage. The Buyer is to treat the
a credit note shall only be issued by way of deducting at least German Product Liability Act or as a result of loss of life, phys- reserved goods with due care, in particular comply with the
25 % of the purchase price. All return delivery costs shall be ical injury or detrimental effects on health. proposed maintenance and use notices.
borne by the Buyer.
§ 10 Rental containers and rental pallets 6. We undertake at the Buyer’s request to release securities
3. In respect of the Buyer's warranty claims, it is required that insofar as the realisable value of the security exceeds the
the Buyer has honoured its obligations to inspect and provide 1. If we make the ordered Goods available to the Buyer on Euro claims that are to be secured by more than 10 %. We are free
notification of defects (e.g. Sections 377, 381 HGB). We are to pallets or other re-usable packaging, these are to be replaced to choose the securities that are to be released.
be notified in writing of obvious defects within eight calendar by the Buyer within 7 calendar days with replacement items
days from delivery and notified of hidden defects within the of the same type and value, or are to be returned to us. If this 7. In the event of failure to pay the due purchase price irre-
same period from the time at which they are identified. If the does not occur, we shall be entitled to invoice the Buyer for the spective of a reasonable additional period or if this can be
Buyer fails to properly inspect and/or provide notification of used pallets/packaging at the replacement price. dispensed with, we shall be entitled, in accordance with the
defects, our liability for the defect for which notification has statutory requirements, to withdraw from the contract and/or
not been provided, or has not been provided in good time, 2. In the case of gas deliveries, rental containers or pallets demand return of the Goods as a result of the reservation of
shall be excluded. shall only be handed over to the Buyer on a rental basis for the title. The demand for the return of the Goods does not simul-
transport, storage and for the Buyer's own use of the acquired taneously contain a statement of withdrawal. Moreover, we
4. If the delivered item is faulty, we may choose whether to gasses. Any other use, or forwarding to third parties, is prohib- are entitled to merely demand the return of the Goods and
provide subsequent performance by way of rectifying the de- ited. After emptying, the Buyer is to return the containers and reserve the right to withdraw.
fect (subsequent improvement) or by delivering a fault-free pallets to us without delay at its own cost.
items (replacement). Subsequent performance shall neither 8. For the duration of the reservation of title, in the event of
entail the dismantling of the faulty item nor new installation 3. The Buyer shall be liable for any damage, pollution or loss the occurrence of damage we shall be entitled to all rights
if we did not originally undertake to provide installation. The of rental containers or pallets, and in such cases undertakes to resulting from insurance policies entered into by the Buyer. In
Buyer is to give us the necessary time and opportunity to pro- inform us without delay. the absence of agreements to the contrary, benefits resulting
vide the due subsequent performance, in particular handover from the comprehensive insurance are to be used in full for
the goods for which notification of defects has been provided 4. In respect of surrendered rental containers that are not con- the repair of the delivery item. If a repair is waived following
for inspection purposes. In the event of replacement, the Buyer trasted with appropriate gas containers for longer than three our approval in the case of severe damage, we shall use the
is to return the faulty item to us. months, we may request as security an amount in the sum of insurance benefit to repay the purchase price and the cost of
the respective list price of similar, new, containers. Such an ancillary performance.
5. If it becomes clear following an inspection that an item was amount falls due for payment immediately. As soon as the
not faulty, we may request compensation from the Buyer for Buyer returns a container for which security has been provid- § 12 Resale and export restrictions
the costs arising from the unjustified complaint (in particular ed, the security shall be returned to the Buyer without inter-
inspection and transport costs) unless the Buyer could not rec- est and less potential repair costs. If the Buyer fails to return 1. The Buyer undertakes, in the case of an intended resale of
ognize that the item was not faulty. the containers, the security amount shall be set off against the the Goods, to comply with the statutory export restrictions
compensation for damages payable by the Buyer. Potential re- and other provisions, in particular the German War Weapons
6. The Buyer's claims for compensation for loss suffered or re- sidual content in returned containers shall not be remunerated. Control Act and the Export Act as well as international trad-
imbursement of expenses incurred in vain shall only apply, in- ing restrictions, boycotts and UN sanctions.
cluding in the case of defects, in accordance with Paragraph 9 § 11 Reservation of title
and in other respects are excluded. 2. If the Buyer violates its obligations resulting from sub-sec-
1. We reserve ownership to the supplied Goods up until all tion 1, and if this results in damage or if a fine or an admin-
7. The above limitation periods of the sales law also apply to existing claims resulting from the business connection (current istrative fine is imposed against us, the Buyer shall insofar
the Buyer's contractual and non-contractual claims for dam- account reservation) against the Buyer have been settled in indemnify us.
ages that are based on faulty Goods unless application of the full. Processing/finishing or conversion shall apply at all times
normal statutory limitation (Sections 195, 199 German Civil in our name and by our order for us, however without any ob- § 13 Applicable law and place of jurisdiction
Code) would, in an individual case, result in a shorter limita- ligation for us, and without loss of our ownership.
tion period. 1. The law of the Federal Republic of Germany applies to these
2. The parties agree that the reservation of title also applies General Terms and Conditions of Sale and the legal relations
§ 9 Limitation of liability as extended reservation of title. The Buyer is entitled to sell between us and the Buyer, by way of exclusion of international
the Goods during the course of normal business activities. uniform law, in particular the UN Sales Law.
1. Claims for compensation for loss suffered, irrespective of on Other disposal is prohibited, in particular an agreement on as-
which legal grounds these are based, are excluded unless we signment prohibition with customers is prohibited that could 2. Frankfurt am Main, Germany, is deemed the exclusive, in-
are to be accused of intent or gross negligence or of violating result in the loss of our ownership. cluding the international, place of jurisdiction for all disputes
a key contractual obligation (see sub-section 2) more than just resulting directly or indirectly from the contractual relation-
insignificantly. Where we are liable for simple negligence, the 3. The Buyer assigns to us at this point in time any claims to ship. However, in all cases we are also entitled to bring legal
liability shall be limited to compensation of foreseeable, typi- which the Buyer is entitled resulting from the use of the reaction at the place of performance of the delivery obligation in
cal and direct damage. Compensation for indirect or collateral served Goods. If the Goods are sold with external items, or accordance with these General Terms and Conditions of Sale
damage such as the loss of expected profit, loss of production used as a substance, the assignment only applies to the reve- or at the Buyer's general place of jurisdiction. This does not
and use and pecuniary damage regarding third party claims nue part that corresponds to the joint ownership part. affect prior-ranking statutory requirements, in particular in re-
is excluded. spect of exclusive places of jurisdiction.
4. The entitlement to resell the object of sale shall become
2. Key contractual obligations are obligations a) that protect inapplicable if the Buyer discontinues its payment or defaults § 14 Severability clause
the Buyer's key contractual legal positions that are to be grant- in payment. In such cases, we shall be entitled to disclose the
ed to him in accordance with the content and purpose of the assignment and collect the claim. The Buyer is to notify us In the event that individual provisions of these General Terms
contract and b) such contractual obligations, the honouring of without delay if an application is filed for the institution of and Conditions of Sale are or become invalid, this shall not
which is required to properly execute the contract and compli- insolvency proceedings regarding its assets. affect the validity of the other provisions. The parties under-
ance with which the Buyer can normally expect. take to replace the invalid provision with a legally valid reg-
5. The Buyer is only entitled to collect assigned claims during ulation that comes closest to the economic objective of the
3. The aforementioned liability limitations also apply in the the ordinary course of business activities. The Buyer is to pro- invalid provision.
case of violations of obligations by, or in favour of, persons vide notification of third party access to the reserved goods
whose culpability is our responsibility in accordance with le- without delay, and carry the cost of potential intervention. Date 08/2020
Additional terms of delivery and payment for Germany

The following terms apply in addition to the general conditions for the sale of goods (pages 350-351) for all deliveries within Germany:
Extra charges: Shipping / Shipping flat rates within Germany:

Shipping is carried out by us via carriers of our choice.
Hazardous goods € 9.50 extra per delivery for hazardous goods We charge the following flat rates for this:
Example: no. 035510-A.
Goods value Surcharge Flat rates
Solder material The prices for solder material depend heavily on the current Up to € 250.00 10%, at least € 10.00 net: € 12.00
prices of silver and copper. We reserve the right to charge Up to € 399.99 – net: € 12.00
extra due to increased raw-material prices; please ask for the
current prices.
As of € 400.00 – net: free 15
Payment of deliveries within Germany:
30 days net from invoice date (no discount is granted).
351
Notes
15
352
Notes
15
353
Imprint
This catalog is a publication of

We are not obliged to alter already delivered products to match
ROTHENBERGER Werkzeuge GmbH such new developments. We also reserve the right to remove
Industriestraße 7 articles from our product programme.
65779 Kelkheim
Germany This catalog invalidates all previous versions. Standard specifi-
Phone +49 6195 800 - 0 cations are non-binding. The operating instructions and sugge-
Fax +49 6195 800 - 3500 stions for use and safety are non-binding and do not in any way
[email protected] replace legal or other regulations, such as employer‘s liability
Company register and number: Königstein / Taunus, HRB 2732 insurance association regulations, in the respective countries.
Great care was taken in compiling this catalog and reproduction No part of this catalog may be reproduced in any way whether
of the product information. Nevertheless we cannot completely by reprinting, photocopying, putting onto microfilm or any
exclude the possibility of error. For this reason, ROTHENBERGER other process, or be converted into a machine-readable language
disclaims any liability for any errors which may have arisen or stored in any electronic systems and processed there without
despite careful checking of the contents. prior written permission from ROTHENBERGER Werkzeuge GmbH.
The design, compilations, performance data, features, dimensions It is not permitted to make any changes and additions to the
and weight of products can alter as a result of further technical catalog. We reserve all rights for all countries.
developments and adaptation of our products to the requirements
and wishes of our customers, without any duty on our part to
announce this in advance. © 2021 ROTHENBERGER Werkzeuge GmbH, Germany
ROTHENBERGER Worldwide
Australia ROTHENBERGER Australia Pty Ltd Netherlands ROTHENBERGER Nederland bv
Unit 6 • 13 Hoyle Avenue Postbus 45 • NL-5120 AA Rijen • Netherlands
Castle Hill • NSW 2154 • Australia Tel.: +31 1 61 29 35 79 • Fax: +31 1 61 29 39 08
Tel.: +61 2 98 99 75 77 [email protected]
[email protected] rothenberger.nl
rothenberger.com.au
Poland ROTHENBERGER Polska Sp. z o.o.
Austria ROTHENBERGER Werkzeuge und Maschinen Ul. Annopol 4A • Hala C • PL-03-699 Warszawa • Poland
Handelsgesellschaft mbH Tel.: + 48 22 213 59 00 • Fax: + 48 22 213 59 01
Gewerbeparkstraße 9 • A-5081 Anif • Austria [email protected]
Tel.: + 43 6246 72 0 91 250 • Fax: + 43 6246 72 0 91 215 rothenberger.pl
[email protected]
rothenberger.at Romania ROTHENBERGER Romania
Str. 1 Mai, Nr. 4 • 075100 Otopeni, Ilfov • Romania
Belgium ROTHENBERGER Benelux bvba Tel.: + 40 21 350 37 44 / 45 / 46
Antwerpsesteenweg 59 • B-2630 Aartselaar • Belgium [email protected]
Tel.: +32 3 8 77 22 77 • Fax: +32 3 8 77 03 94 rothenberger-romania.ro
[email protected]
rothenberger.be Russia ROTHENBERGER Russia
Avtozavodskaya str. 25 • 115280 Moscow • Russia
Brazil ROTHENBERGER do Brasil LTDA Tel. : +7 800 700 57 96 • Tel.: +7 495 792 59 44
Av. Fagundes de Oliveira • 538–Galpão A4 [email protected]
09950-300 • Diadema / SP • Brasil rothenberger-russia.ru
Tel.: +55 11 4044 4748 • Fax: +55 11 4044 5051
[email protected] Scandinavia ROTHENBERGER SCANDINAVIA A/S
rothenberger.com.br Smedevaenget 8 • DK-9560 Hadsund • Sweden
P.O.Box 1366 • SE-17126 Solna • Sweden
Bulgaria ROTHENBERGER Bulgaria EOOD Tel.: + 46 8 629 22 99
Boul. Sitnjakovo 79 • BG-1111 Sofia • Bulgaria [email protected]
Tel.: +35 9 2 9 46 14 59 • Fax: +35 9 2 9 46 12 05 rothenberger.com/se-se/contact/
[email protected]
rothenberger.com/bg-bg South Africa ROTHENBERGER-TOOLS SA (Pty) Ltd
P.O. Box 4360 • Edenvale 1610
China ROTHENBERGER Pipe Technologies Co., Ltd. 165 Van Der Bijl Street • Meadowdale Germiston
Building D • No 9 Lianhe Road Gauteng (Johannesburg) • South Africa
Hudai Industrial Park • Binghu District Tel.: +27 11 3 72 96 31 • Fax: +27 11 3 72 96 32
214161 Wuxi • China [email protected]
Tel.: + 886 0510 83217213 • Fax: + 886 0510 83217263 rothenberger.co.za
[email protected]
Spain ROTHENBERGER S.A.
Czech ROTHENBERGER CZ Ctra. Durango-Elorrio, Km 2 • E-48220 Abadiano (Vizcaya)
Republic Prumyslova 1306/7 • 102 00 Praha 10 • Czech Republic (P.O. Box) 117 • E-48200 Durango (Vizcaya) • Spain
Tel.: + 420 271 730 183 Tel.: +34 94 6 21 01 00 • Fax: +34 94 6 21 01 31
[email protected] [email protected]
rothenberger.cz rothenberger.es
France ROTHENBERGER France S.A. Switzerland ROTHENBERGER (Schweiz) AG

24, rue des Drapiers • BP 45033 • F-57071 Metz Cedex 3 • France Herostr. 9 • CH-8048 Zürich • Switzerland
Tel.: +33 3 87 74 92 92 • Fax: +33 3 87 74 94 03 Tel.: + 41 44 435 30 30 • Fax: + 41 44 401 06 08
rothenberger.fr
Turkey ROTHENBERGER TÜRKİYE
Germany ROTHENBERGER Deutschland GmbH ROTHENBERGER Center, Barbaros Bulvarı No:9
Industriestraße 7 • 65779 Kelkheim • Germany TR-34775 Şerifali / Ümraniye İstanbul • Turkey
Tel.: + 49 6195 800 - 0 • Fax: + 49 6195 800 - 3500 Tel.: +90 216 449 24 85 • Fax: +90 216 449 24 87
rothenberger.com rothenberger.com.tr
ROTHENBERGER Werkzeuge Produktion GmbH UAE ROTHENBERGER Middle East FZCO

Spessartstraße 2–4 • 65779 Kelkheim • Germany PO Box 261190 • Jebel Ali Free Zone
Tel.: + 49 (0 6195 / 800 - 0 • Fax: + 49 56 02 93 94 36 Dubai • United Arab Emirates
Tel.: +971 4 883 97 77 • Fax: +971 4 883 97 57
Greece ROTHENBERGER Hellas S.A. [email protected]
Agias Kyriakis 45 • 17564 Paleo Faliro • Greece
Tel.: +30 210 94 02 049 • +30 210 94 07 302-3 ROTHENBERGER Middle East Equipment Trading LLC
Fax: +30 210 94 07 322 PO Box 261190 • Al Quoz Industrial Area 3
[email protected] Dubai • United Arab Emirates
rothenberger.com Tel.: +971 4 885 48 65 • Fax: +971 4 883 97 57
[email protected]
Hungary ROTHENBERGER Hungary Kft.
Gubacsi út 24 • H-1097 Budapest • Hungary UK ROTHENBERGER UK Ltd.
Tel.: +36 1 3 47 50 40 • Fax: +36 1 3 47 50 59 2, Kingsthorne Park • Henson Way
[email protected] Kettering • GB-Northants NN16 8PX • UK
rothenberger.hu Tel.: + 44 15 36 31 03 00 • Fax: + 44 15 36 31 06 00
[email protected]
India ROTHENBERGER India Pvt. Ltd.
Plot No 17 • Sector–37 • Pace city-I Ukraine ROTHENBERGER-CENTER LTD.
Gurgaon • Haryana–122 001 • India Kotovskogo Str. 11 • 04060 Kiev • Ukraine
Tel.: +91 124 4618900 • Fax: +91 124 4019471 Tel.: +380 444941597
rothenberger.in
USA ROTHENBERGER USA Inc.
Italy ROTHENBERGER Italiana s.r.l. 7130 Clinton Road • Loves Park • IL 61111 • USA
Via G. Reiss Romoli 17–19 • I-20019 Settimo Milanese • Italy Tel.: +1 80 05 45 76 98 • Fax: +1 81 56 33 08 79
Tel.: +39 02 33 50 601 • Fax: +39 02 33 50 0151 [email protected]
[email protected] rothenberger.com/us-en
rothenberger.it
We connect people
with water and energy.
Safe. Sustainable.
4100000262/01.21/GB/MKT/HIM
Visit us:
rothenberger.com
facebook.com/rothenberger
instagram.com/rothenberger_official
ROTHENBERGER Werkzeuge GmbH
Industriestraße 7
65779 Kelkheim
Germany
Telefon +49 6195 800 - 0

Telefax +49 6195 800 - 3500
[email protected]

Main Catalogue 2021

Uploaded by

Copyright:

Available Formats

Main Catalogue 2021

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Main Catalogue 2021

Uploaded by

Copyright:

Available Formats

MAIN

ROTHENBERGER is part of it!

More information can be found at www.cordless-alliance-system.com

To achieve this, we see the world through your eyes, familiarise

Service for professionals:

Visit us on Facebook, Instagram and YouTube!

RODIA Diamond Core Drilling 36 2

Expanding, Extracting, Flaring 76 4

Threading & Grooving 122 6

Soldering & Welding 144 7

Testing & Leak Detection 180 8

Inspection & Locating 198 10

Flushing & Pipe Cleaning 212 11

ROWELD Plastic Pipe Welding 246 12

Refrigeration & Air-

General-Purpose Tools 290 14

Index – Alphabetical / Numeric,

Dimensions: 150 x 60 x 40 mm 150 x 60 x 40 mm 150 x 60 x 40 mm 150 x 60 x 40 mm 160 x 60 x 40 mm

Weight: 255 g 470 g 255 g 255 g 550 g

TC 42 XL TC 42 PRO MLP TC 42 PRO PVC TC 42 PRO INOX TC CSST

Dimensions: 166 x 67 x 54 mm 160 x 60 x 40 mm 160 x 60 x 40 mm 160 x 60 x 40 mm 166 x 67 x 54 mm

Weight: 430 g 550 g 550 g 550 g 430 g

Weight: 110 g 125 g 140 g 270 g 305 g

Pipe cutters for metal 1

Dimensions: 175 x 75 x 30 mm 150 x 60 x 28 mm 240 x 110 x 50 mm 360 x 80 x 70 mm 370 x 280 x 250 mm

Weight: 520 g 305 g 755 g 755 g 575 g

ROSLICE 12 mm ROSLICE 15 mm ROSLICE 18 mm ROSLICE 22 mm TUBE CUTTER INOX

Working range: Ø 12 mm (1/2“) Ø 15 mm (5/8”) Ø 18 mm (3/4”) Ø 22 mm (7/8”) Ø 6-60 mm (1/4-2.3/8”)

Dimensions: 48 x 48 x 35 mm 48 x 48 x 35 mm 58 x 58 x 35 mm 58 x 58 x 35 mm 230 x 110 x 40 mm

Weight: 230 g 240 g 250 g 260 g 780 g

Suitable for: Cu Cu Cu Cu Stainless steel

ENORM 4” SUPER 1.1/4” SUPER 2” SUPER 1.1/4” INOX SUPER 2” INOX

Weight: 7,105 g 1,040 g 2,155 g 1,040 g 2,155 g

Suitable for: Steel Steel Steel Stainless steel Stainless steel

Dimensions: 190 x 80 x 30 mm 210 x 60 x 30 mm 215 x 195 x 40 mm 290 x 240 x 40 mm

Weight: 370 g 220 g 740 g 950 g

ROCUT TC 42 ROCUT TC 50 ROCUT TC 63 ROCUT TC 75

Dimensions: 210 x 100 x 25 mm 260 x 120 x 25 mm 280 x 130 x 30 mm 480 x 165 x 35 mm

Weight: 447 g 600 g 700 g 1,740 g

Outer pipe diameter: Ø 32 - 110 mm Ø 110 - 160 mm

Wall thickness: Up to max. 16 mm* Up to max. 16 mm*

Operation mode: Manual Manual

Function: Cutting, chamfering Cutting, chamfering

* not for all materials, dependant on cutting tool

Plastic pipe cutters 1

Working range: Ø 6-67 mm (1/4-2.5/8”) Ø 50-125 mm (2-5”) Ø 110-168 mm (4.3/8-6.5/8“)

Dimensions: 230 x 110 x 40 mm 360 x 180 x 50 mm 390 x 220 x 50 mm

Weight: 700 g 1,600 g 1,700 g

Power: 1,600 W (230V)

Speed: 1,000 - 2,800 rpm

Dimensions: 440 x 120 x 80 mm

Saw blade holder: Quick tensioning for universal saw blades

Exact telescopic guide

Spare cutter wheel

Easy turning of the

Quick adjustment of the

Always within reach Two guide rollers with recess

Retractable internal Cuts near to flares

Product profile No. 1000002002

Set (No. 1000002190) includes: TUBE CUTTER 35,

Index – Alphabetical / Numeric,