Scribd
Upload
57 views1 page

Specifications: Model 4040A

The document provides specifications for the Fluke 4040A and 4017A sweep/function generators. Some key specifications include: The 4040A can generate sine, square, triangle, and pulse waves from 0.2 Hz to 20 MHz with 5-digit resolution and precision tuning. It has amplitude and offset controls, as well as AM, FM, and burst modulation capabilities. The 4017A has similar waveform generation from 0.1 Hz to 10 MHz but with a lower maximum frequency. Both models have LED displays and precision frequency sweeping functions. The generators have BNC outputs, TTL and CMOS compatible signal levels, and come supplied with cables and a carrying case.

Uploaded by

Tran Ba Quynh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
57 views1 page

Specifications: Model 4040A

The document provides specifications for the Fluke 4040A and 4017A sweep/function generators. Some key specifications include: The 4040A can generate sine, square, triangle, and pulse waves from 0.2 Hz to 20 MHz with 5-digit resolution and precision tuning. It has amplitude and offset controls, as well as AM, FM, and burst modulation capabilities. The 4017A has similar waveform generation from 0.1 Hz to 10 MHz but with a lower maximum frequency. Both models have LED displays and precision frequency sweeping functions. The generators have BNC outputs, TTL and CMOS compatible signal levels, and come supplied with cables and a carrying case.

Uploaded by

Tran Ba Quynh
Copyright
© Attribution Non-Commercial (BY-NC)
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Specifications

4040A
Frequency Characteristics Waveforms Range Resolution Tuning Range Fine Variable Duty Cycle Operating Modes Output Characteristics Impedance Level Amplitude Attenuation DC Offset SINE Wave Distortion Flatness Square wave Symmetry Rise time Triangle Wave TTL Output Level Rise time Duty Cycle CMOS Output Max. Frequency Level Rise Time VCG (Voltage controlled generator) Input Voltage Impedance Sweep Operation Mode Width Rate Sweep Output Start/Stop Frequencies Frequency Counter Accuracy Time Base Accuracy Display Mode External Input Frequency Resolution Sensitivity Power Source Dimensions Weight

models 4017A

4040A

Sine, Square, Triangle, Pulse, Ramp 0.2 Hz to 20 MHz 0.1 Hz to 10 MHz in 8 ranges in 8 ranges 5 digits 5 digits 10:1 10:1 5% of coarse setting 5% of coarse setting 15:85:15 cont variable 15:85:15 cont variable Normal,sweep, VCG, Normal, sweep, VCG AM,FM,burst 50 10% 20 V p-p Open circuit, 10V p-p into 50 Variable, 20 dB range typical -20 dB 1dB Preset 0.1 V typ Variable: 10V open-circuit 5 into 50 <3% typical at 1 kHz 5%(.45 dB) 0.1 Hz to 8 MHz 20%(2.0 dB) 8 MHz to 20 MHz (10MHz 4017A) @3Vp-p 0.2 Hz to 100 kHz <2% 30 ns Linearity: 98% to 100 kHz 0.8V to 2.4V 20 nS 50% typical 2 MHz 4V to 14V 0.5 p-p cont. variable 120 nS 0.1 Hz to 100 kHz <2%

4017A

Model 4040A
20 MHz Sweep/Function Generator with Frequency Counter
0.2 Hz to 20 MHz AM & FM modulation Burst operation External frequency counter

to 30 MHz
5 digit LED display All features of Model 4017A

Model 4017A
10 MHz Sweep/Function Generator with Digital Display

0-10V 1V causes a 100:1 frequency change 10k 5% LIN/LOG 100:1 continuously variable 20 ms to 2 s cont variable 0 to 2V Adjustable Time base accuracy 1 count 10 ppm (23 5C) 5 digit LED INT or EXT

0.1 Hz to 10 MHz Linear and log sweep 5 digit LED display All features of Model 4011A

Specifications
0.5 s to 30 s cont variable 0 to 10V NA

4040A

model

NA

5 Hz to 30 MHz Does not apply 0.1, 1, 10, 100, 1 kHz 25Vrms 120/230 VAC 10% 50/60 Hz, internal jumper selectable 5.5 x 11.75 x 10.575" 4.5x 11.75 x 10.575" (140 x 298 x 264mm) (114 x 298 x 264mm) 4.5 lbs. (2 kg) 4 lbs. (1.8 kg)

Accessories

Two Year Warranty

SUPPLIED: Output Cable with BNC to Alligator Clips, Instruction Manual Carrying Case (not included): LC-40

AM MODULATION CHARACTERISTICS Source Internal, External Modulation Ratio 0 to 100% Int modulation 1 kHz Ext Modulation DC to 500 kHz Ext Sensitivity Less than 10V p-p for 100% modulation FM MODULATION CHARACTERISTICS Source Internal, External Modulation Ratio 0 to 100% Deviation 0 to 5% INT Modulation 1 kHz Ext Modulation DC to 500 kHz Ext Sensitivity Less than 10V p-p for 100% modulation BURST CHARACTERISTIC Source Internal, External Burst Width Cont. variable from 5% to 90% of internal gating frequency Repition Rate 0.5 Hz to 50 Hz, internal DC to 500 kHz external External Level TTL levels Burst Frequency Determined by main generator frequency setting

22

You might also like