FYP Title

Final Year Project

Session 2015-2019

A project submitted in partial fulfillment of the degree of

BS in Software Engineering

Department of Software Engineering

Faculty of Computer Science & Information Technology
Superior University, Lahore

FALL 2019

[  ] Development [ ] Research [ ] R&D

Type (Nature of project)
 Project Report: < write Project title here>

Area of specialization

FYP ID
Project Group Members

Sr.# Reg. # Student Name Email ID *Signature

(i)

(ii)

(iii)

*The candidates confirm that the work submitted is their own and appropriate credit has been
given where reference has been made to work of others

Plagiarism Free Certificate

This is to certify that, I ________ S/D of Muhammad Siddique, group leader of FYP under registration no
______________________________at Software Engineering Department, The Superior College, Lahore. I declare
that my FYP report is checked by my supervisor.

Date: Name of Group Leader: _________________ Signature: _____________

Name of Supervisor: Dr. ABC Co-Supervisor: Mr. XYZ

Designation: Lecturer Designation: Associate Professor

Signature: ________________ Signature: _________________

HoD: Dr. Arfan Jaffar

Signature: _______________

Project Report
Faculty of CS&IT, Superior University Lahore, Pakistan 2
 Project Report: < write Project title here>

[Title of Project]

Change Record
Author(s) Version Date Notes Supervisor’s Signature
1.0 <Original Draft>
<Changes Based on
Feedback from
Supervisor>
<Changes Based on
Feedback From Faculty>
<Added Project Plan>
<Changes Based on
Feedback from
Supervisor>

APPROVAL
Faculty of CS&IT, Superior University Lahore, Pakistan 3
 Project Report: < write Project title here>

PROJECT SUPERVISOR
Comments: ___________________________________________________________________
_____________________________________________________________________________

Name:______________________________
Date:_______________________________ Signature:__________________________

PROJECT MANAGER
Comments: ___________________________________________________________________
_____________________________________________________________________________

Date:_______________________________ Signature:__________________________

HEAD OF THE DEPARTMENT

Comments: ___________________________________________________________________
_____________________________________________________________________________

Date:_______________________________ Signature:__________________________

Faculty of CS&IT, Superior University Lahore, Pakistan 4

 Project Report: < write Project title here>

Dedication

This work is dedicated to my . . . . . .

Faculty of CS&IT, Superior University Lahore, Pakistan 5

 Project Report: < write Project title here>

Acknowledgements

I am really thankful to my supervisor who has . . . . . . . . . .

Executive Summary

[12 pt, Calibri, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 6

 Project Report: < write Project title here>

[An executive summary summarizes a longer report or proposal or a group of related reports in such a way that
readers can rapidly become acquainted with a large body of material without having to read it all. This section
summarizes the overall document, and should include the important highlights from the document. It should be
concise. It is NOT an introduction, index or table of contents, it is a summary. The Executive Summary should not
make any reference to other parts of the document. You have to write one page to let reader understand an
overview of the project.]

Table of Contents
Dedication..................................................................................................................................... iv
Acknowledgements........................................................................................................................v
Executive Summary.......................................................................................................................vi

Faculty of CS&IT, Superior University Lahore, Pakistan 7

 Project Report: < write Project title here>

Table of Contents......................................................................................................................... vii

List of Figures................................................................................................................................ ix
List of Tables.................................................................................................................................. x
Chapter 1....................................................................................................................................... 1
Introduction................................................................................................................................... 1
1.1. Background..................................................................................................................... 2
1.2. Motivations and Challenges............................................................................................2
1.3. Goals and Objectives.......................................................................................................2
1.4. Literature Review/Existing Solutions...............................................................................2
1.5. Gap Analysis.................................................................................................................... 2
1.6. Proposed Solution...........................................................................................................2
1.7. Project Plan..................................................................................................................... 3
1.7.1. Work Breakdown Structure.........................................................................................3
1.7.2. Roles & Responsibility Matrix......................................................................................3
1.7.3. Gantt Chart.................................................................................................................. 3
1.8. Report Outline.................................................................................................................3
Chapter 2....................................................................................................................................... 4
Software Requirement Specifications............................................................................................4
2.1. Introduction.................................................................................................................... 5
2.1.1. Purpose........................................................................................................................5
2.1.2. Document Conventions...............................................................................................5
2.1.3. Intended Audience and Reading Suggestions..............................................................5
2.1.4. Product Scope..............................................................................................................5
2.1.5. References................................................................................................................... 6
2.2. Overall Description..........................................................................................................6
2.2.1. Product Perspective.....................................................................................................6
2.2.2. Product Functions........................................................................................................6
2.2.3. User Classes and Characteristics..................................................................................6
2.2.4. Operating Environment...............................................................................................7
2.2.5. Design and Implementation Constraints.....................................................................7
2.2.6. User Documentation....................................................................................................7
2.2.7. Assumptions and Dependencies..................................................................................7
2.3. External Interface Requirements.....................................................................................8
2.3.1. User Interfaces.............................................................................................................8
2.3.2. Hardware Interfaces....................................................................................................8
2.3.3. Software Interfaces......................................................................................................8
2.3.4. Communications Interfaces.........................................................................................9
2.4. System Features..............................................................................................................9
2.4.1. System Feature 1.........................................................................................................9
2.4.1.1. Description and Priority........................................................................................... 9
2.4.1.2. Stimulus/Response Sequences.................................................................................9
2.4.1.3. Functional Requirements.........................................................................................9
2.4.2. System Feature 2.......................................................................................................10
2.4.2.1. Description and Priority.........................................................................................10

Faculty of CS&IT, Superior University Lahore, Pakistan 8

 Project Report: < write Project title here>

2.4.2.2. Stimulus/Response Sequences...............................................................................10

2.4.2.3. Functional Requirements.......................................................................................10
2.4.3. System Feature 3 (and so on)....................................................................................11
2.5. Other Nonfunctional Requirements..............................................................................11
2.5.1. Performance Requirements.......................................................................................11
2.5.2. Safety Requirements................................................................................................. 11
2.5.3. Security Requirements...............................................................................................12
2.5.4. Software Quality Attributes.......................................................................................12
2.5.5. Business Rules............................................................................................................12
2.6. Other Requirements......................................................................................................12
Chapter 3..................................................................................................................................... 13
Use Case Analysis.........................................................................................................................13
3.1. Use Case Model.............................................................................................................14
3.2. Use Case Descriptions................................................................................................... 14
Chapter 4..................................................................................................................................... 15
System Design..............................................................................................................................15
4.1. Architecture Diagram....................................................................................................16
4.2. Domain Model...............................................................................................................16
4.3. Entity Relationship Diagram with data dictionary.........................................................16
4.4. Class Diagram................................................................................................................ 17
4.5. Sequence / Collaboration Diagram................................................................................17
4.6. Operation contracts...................................................................................................... 17
4.7. Activity Diagram............................................................................................................18
4.8. State Transition Diagram...............................................................................................18
4.9. Component Diagram.....................................................................................................18
4.10. Deployment Diagram.................................................................................................19
4.11. Data Flow diagram [only if structured approach is used - Level 0 and 1]..................19
Chapter 5..................................................................................................................................... 20
Implementation........................................................................................................................... 20
5.1. Important Flow Control/Pseudo codes.........................................................................21
5.2. Components, Libraries, Web Services and stubs...........................................................21
5.3. Deployment Environment.............................................................................................21
5.4. Tools and Techniques....................................................................................................22
5.5. Best Practices / Coding Standards.................................................................................22
5.6. Version Control............................................................................................................. 22
Chapter 6..................................................................................................................................... 23
Testing and Evaluation.................................................................................................................23
6.1. Use Case Testing............................................................................................................24
6.2. Equivalence partitioning................................................................................................24
6.3. Boundary value analysis................................................................................................24
6.4. Data flow testing........................................................................................................... 24
6.5. Unit testing....................................................................................................................25
6.6. Integration testing.........................................................................................................25
6.7. Performance testing......................................................................................................25

Faculty of CS&IT, Superior University Lahore, Pakistan 9

 Project Report: < write Project title here>

6.8. Stress Testing................................................................................................................ 25

Chapter 7..................................................................................................................................... 26
Summary, Conclusion and Future Enhancements.......................................................................26
7.1. Project Summary...........................................................................................................27
7.2. Achievements and Improvements.................................................................................27
7.3. Critical Review...............................................................................................................27
7.4. Lessons Learnt...............................................................................................................27
7.5. Future Enhancements/Recommendations....................................................................28
Appendices.................................................................................................................................. 29
Appendix A: User Manual............................................................................................................ 30
Appendix B: Administrator Manual............................................................................................. 31
Appendix C: Information / Promotional Material........................................................................32
Reference and Bibliography.........................................................................................................35
Index............................................................................................................................................ 37

List of Figures

1.1 Caption of first figure of first chapter 6

1.2 Caption of second figure of first chapter 7
2.1 Caption of first figure of second chapter 14

Faculty of CS&IT, Superior University Lahore, Pakistan 10

 Project Report: < write Project title here>

2.2 Caption of second figure of second chapter 22

2.3 Caption of third figure of second chapter 26
5.1 Caption of first figure of fifth chapter 49
5.2 Caption of second figure of fifth chapter 49

List of Tables

1.1 label of first table of first chapter 6

1.2 label of second table of first chapter 7
2.1 label of first table of second chapter 14

Faculty of CS&IT, Superior University Lahore, Pakistan 11

 Project Report: < write Project title here>

2.2 label of second table of second chapter 22

2.3 label of third table of second chapter 26
5.1 label of first table of fifth chapter 49
5.2 label of second table of fifth chapter 49

Faculty of CS&IT, Superior University Lahore, Pakistan 12

 Project Report: < write Project title here>

Chapter 1
Introduction

Faculty of CS&IT, Superior University Lahore, Pakistan 13

 Project Report: < write Project title here>

Chapter 1: Introduction
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this chapter all about]

1.1. Background
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.2. Motivations and Challenges

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.3. Goals and Objectives

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.4. Literature Review/Existing Solutions

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.5. Gap Analysis

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.6. Proposed Solution

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 14

 Project Report: < write Project title here>

1.7. Project Plan

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.7.1. Work Breakdown Structure

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.7.2. Roles & Responsibility Matrix

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.7.3. Gantt Chart

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

1.8. Report Outline

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 15

 Project Report: < write Project title here>

Chapter 2
Software Requirement
Specifications

Faculty of CS&IT, Superior University Lahore, Pakistan 16

 Project Report: < write Project title here>

Chapter 2: Software Requirement Specifications

1.9. Introduction
1.9.1. Purpose
<Identify the product whose software requirements are specified in this document, including
the revision or release number. Describe the scope of the product that is covered by this SRS,
particularly if this SRS describes only part of the system or a single subsystem.>

1.9.2. Document Conventions

<Describe any standards or typographical conventions that were followed when writing this
SRS, such as fonts or highlighting that have special significance. For example, state whether
priorities for higher-level requirements are assumed to be inherited by detailed requirements,
or whether every requirement statement is to have its own priority.>

1.9.3. Intended Audience and Reading Suggestions

<Describe the different types of reader that the document is intended for, such as developers,
project managers, marketing staff, users, testers, and documentation writers. Describe what
the rest of this SRS contains and how it is organized. Suggest a sequence for reading the
document, beginning with the overview sections and proceeding through the sections that are
most pertinent to each reader type.>

1.9.4. Product Scope

<Provide a short description of the software being specified and its purpose, including relevant
benefits, objectives, and goals. Relate the software to corporate goals or business strategies. If
a separate vision and scope document is available, refer to it rather than duplicating its
contents here.>

Faculty of CS&IT, Superior University Lahore, Pakistan 17

 Project Report: < write Project title here>

1.9.5. References
<List any other documents or Web addresses to which this SRS refers. These may include user
interface style guides, contracts, standards, system requirements specifications, use case
documents, or a vision and scope document. Provide enough information so that the reader
could access a copy of each reference, including title, author, version number, date, and source
or location.>

1.10. Overall Description

1.10.1. Product Perspective
<Describe the context and origin of the product being specified in this SRS. For example, state
whether this product is a follow-on member of a product family, a replacement for certain
existing systems, or a new, self-contained product. If the SRS defines a component of a larger
system, relate the requirements of the larger system to the functionality of this software and
identify interfaces between the two. A simple diagram that shows the major components of the
overall system, subsystem interconnections, and external interfaces can be helpful.>

1.10.2. Product Functions

<Summarize the major functions the product must perform or must let the user perform.
Details will be provided in Section 3, so only a high level summary (such as a bullet list) is
needed here. Organize the functions to make them understandable to any reader of the SRS. A
picture of the major groups of related requirements and how they relate, such as a top level
data flow diagram or object class diagram, is often effective.>

1.10.3. User Classes and Characteristics

<Identify the various user classes that you anticipate will use this product. User classes may be
differentiated based on frequency of use, subset of product functions used, technical expertise,
security or privilege levels, educational level, or experience. Describe the pertinent
characteristics of each user class. Certain requirements may pertain only to certain user classes.

Faculty of CS&IT, Superior University Lahore, Pakistan 18

 Project Report: < write Project title here>

Distinguish the most important user classes for this product from those who are less important
to satisfy.>

1.10.4. Operating Environment

<Describe the environment in which the software will operate, including the hardware
platform, operating system and versions, and any other software components or applications
with which it must peacefully coexist.>

1.10.5. Design and Implementation Constraints

<Describe any items or issues that will limit the options available to the developers. These
might include: corporate or regulatory policies; hardware limitations (timing requirements,
memory requirements); interfaces to other applications; specific technologies, tools, and
databases to be used; parallel operations; language requirements; communications protocols;
security considerations; design conventions or programming standards (for example, if the
customer’s organization will be responsible for maintaining the delivered software).>

1.10.6. User Documentation

<List the user documentation components (such as user manuals, on-line help, and tutorials)
that will be delivered along with the software. Identify any known user documentation delivery
formats or standards.>

1.10.7. Assumptions and Dependencies

<List any assumed factors (as opposed to known facts) that could affect the requirements
stated in the SRS. These could include third-party or commercial components that you plan to
use, issues around the development or operating environment, or constraints. The project
could be affected if these assumptions are incorrect, are not shared, or change. Also identify
any dependencies the project has on external factors, such as software components that you
intend to reuse from another project, unless they are already documented elsewhere (for
example, in the vision and scope document or the project plan).>

Faculty of CS&IT, Superior University Lahore, Pakistan 19

 Project Report: < write Project title here>

1.11. External Interface Requirements

1.11.1. User Interfaces

<Describe the logical characteristics of each interface between the software product and the
users. This may include sample screen images, any GUI standards or product family style guides
that are to be followed, screen layout constraints, standard buttons and functions (e.g., help)
that will appear on every screen, keyboard shortcuts, error message display standards, and so
on. Define the software components for which a user interface is needed. Details of the user
interface design should be documented in a separate user interface specification.>

1.11.2. Hardware Interfaces

<Describe the logical and physical characteristics of each interface between the software
product and the hardware components of the system. This may include the supported device
types, the nature of the data and control interactions between the software and the hardware,
and communication protocols to be used.>

1.11.3. Software Interfaces

<Describe the connections between this product and other specific software components
(name and version), including databases, operating systems, tools, libraries, and integrated
commercial components. Identify the data items or messages coming into the system and going
out and describe the purpose of each. Describe the services needed and the nature of
communications. Refer to documents that describe detailed application programming interface
protocols. Identify data that will be shared across software components. If the data sharing
mechanism must be implemented in a specific way (for example, use of a global data area in a
multitasking operating system), specify this as an implementation constraint.>

Faculty of CS&IT, Superior University Lahore, Pakistan 20

 Project Report: < write Project title here>

1.11.4. Communications Interfaces

<Describe the requirements associated with any communications functions required by this
product, including e-mail, web browser, network server communications protocols, electronic
forms, and so on. Define any pertinent message formatting. Identify any communication
standards that will be used, such as FTP or HTTP. Specify any communication security or
encryption issues, data transfer rates, and synchronization mechanisms.>

1.12. System Features

<This template illustrates organizing the functional requirements for the product by system
features, the major services provided by the product. You may prefer to organize this section by
use case, mode of operation, user class, object class, functional hierarchy, or combinations of
these, whatever makes the most logical sense for your product.>

1.12.1. System Feature 1

<Don’t really say “System Feature 1.” State the feature name in just a few words.>
1.12.1.1. Description and Priority
<Provide a short description of the feature and indicate whether it is of High, Medium, or
Low priority. You could also include specific priority component ratings, such as benefit,
penalty, cost, and risk (each rated on a relative scale from a low of 1 to a high of 9).>
1.12.1.2. Stimulus/Response Sequences
<List the sequences of user actions and system responses that stimulate the behavior
defined for this feature. These will correspond to the dialog elements associated with use
cases.>
1.12.1.3. Functional Requirements
<Itemize the detailed functional requirements associated with this feature. These are the
software capabilities that must be present in order for the user to carry out the services
provided by the feature, or to execute the use case. Include how the product should
respond to anticipated error conditions or invalid inputs. Requirements should be

Faculty of CS&IT, Superior University Lahore, Pakistan 21

 Project Report: < write Project title here>

concise, complete, unambiguous, verifiable, and necessary. Use “TBD” as a placeholder

to indicate when necessary information is not yet available.>

<Each requirement should be uniquely identified with a sequence number or a

meaningful tag of some kind.>

REQ-SF1-1: <Write your requirement here>

REQ-SF1-2:
REQ-SF1-3:

1.12.2. System Feature 2

<Don’t really say “System Feature 1.” State the feature name in just a few words.>
1.12.2.1. Description and Priority
<Provide a short description of the feature and indicate whether it is of High, Medium, or
Low priority. You could also include specific priority component ratings, such as benefit,
penalty, cost, and risk (each rated on a relative scale from a low of 1 to a high of 9).>
1.12.2.2. Stimulus/Response Sequences
<List the sequences of user actions and system responses that stimulate the behavior
defined for this feature. These will correspond to the dialog elements associated with use
cases.>
1.12.2.3. Functional Requirements
<Itemize the detailed functional requirements associated with this feature. These are the
software capabilities that must be present in order for the user to carry out the services
provided by the feature, or to execute the use case. Include how the product should
respond to anticipated error conditions or invalid inputs. Requirements should be
concise, complete, unambiguous, verifiable, and necessary. Use “TBD” as a placeholder
to indicate when necessary information is not yet available.>

Faculty of CS&IT, Superior University Lahore, Pakistan 22

 Project Report: < write Project title here>

<Each requirement should be uniquely identified with a sequence number or a

meaningful tag of some kind.>

REQ-SF2-1:
REQ-SF2-2:
REQ-SF2-3:

1.12.3. System Feature 3 (and so on)

1.13. Other Nonfunctional Requirements

1.13.1. Performance Requirements
<If there are performance requirements for the product under various circumstances, state
them here and explain their rationale, to help the developers understand the intent and make
suitable design choices. Specify the timing relationships for real time systems. Make such
requirements as specific as possible. You may need to state performance requirements for
individual functional requirements or features.>

1.13.2. Safety Requirements

<Specify those requirements that are concerned with possible loss, damage, or harm that could
result from the use of the product. Define any safeguards or actions that must be taken, as well
as actions that must be prevented. Refer to any external policies or regulations that state safety
issues that affect the product’s design or use. Define any safety certifications that must be
satisfied.>

Faculty of CS&IT, Superior University Lahore, Pakistan 23

 Project Report: < write Project title here>

1.13.3. Security Requirements

<Specify any requirements regarding security or privacy issues surrounding use of the product
or protection of the data used or created by the product. Define any user identity
authentication requirements. Refer to any external policies or regulations containing security
issues that affect the product. Define any security or privacy certifications that must be
satisfied.>

1.13.4. Software Quality Attributes

<Specify any additional quality characteristics for the product that will be important to either
the customers or the developers. Some to consider are: adaptability, availability, correctness,
flexibility, interoperability, maintainability, portability, reliability, reusability, robustness,
testability, and usability. Write these to be specific, quantitative, and verifiable when possible.
At the least, clarify the relative preferences for various attributes, such as ease of use over ease
of learning.>

1.13.5. Business Rules

<List any operating principles about the product, such as which individuals or roles can perform
which functions under specific circumstances. These are not functional requirements in
themselves, but they may imply certain functional requirements to enforce the rules.>

1.14. Other Requirements

<Define any other requirements not covered elsewhere in the SRS. This might include database
requirements, internationalization requirements, legal requirements, reuse objectives for the
project, and so on. Add any new sections that are pertinent to the project.>

Faculty of CS&IT, Superior University Lahore, Pakistan 24

 Project Report: < write Project title here>

Chapter 3
Use Case Analysis

Faculty of CS&IT, Superior University Lahore, Pakistan 25

 Project Report: < write Project title here>

Chapter 3: System Analysis

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this chapter all about]

3.1. Use Case Model

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

3.2. Use Case Descriptions

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 26

 Project Report: < write Project title here>

Chapter 4
System Design

Faculty of CS&IT, Superior University Lahore, Pakistan 27

 Project Report: < write Project title here>

Chapter 4: System Design

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this chapter all about]

4.1. Architecture Diagram

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

4.2. Domain Model

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

4.3. Entity Relationship Diagram with data dictionary

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 28

 Project Report: < write Project title here>

4.4. Class Diagram

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

4.5. Sequence / Collaboration Diagram

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

4.6. Operation contracts

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 29

 Project Report: < write Project title here>

4.7. Activity Diagram

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

4.8. State Transition Diagram

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

4.9. Component Diagram

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 30

 Project Report: < write Project title here>

4.10. Deployment Diagram

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

4.11. Data Flow diagram [only if structured approach is used - Level 0 and 1]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 31

 Project Report: < write Project title here>

Chapter 5
Implementation

Faculty of CS&IT, Superior University Lahore, Pakistan 32

 Project Report: < write Project title here>

Chapter 5: Implementation
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this chapter all about]

5.1. Important Flow Control/Pseudo codes

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

5.2. Components, Libraries, Web Services and stubs

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

5.3. Deployment Environment

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 33

 Project Report: < write Project title here>

5.4. Tools and Techniques

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

5.5. Best Practices / Coding Standards

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

5.6. Version Control

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 34

 Project Report: < write Project title here>

Chapter 6
Testing and Evaluation

Faculty of CS&IT, Superior University Lahore, Pakistan 35

 Project Report: < write Project title here>

Chapter 6: Testing and Evaluation

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
This chapter focuses on the comprehensive testing and evaluation strategies employed
to ensure the robustness, functionality, and reliability of the AR Furniture system. It
outlines the various testing phases, methodologies, and criteria used in the
development lifecycle. Additionally, the chapter delves into the assessment metrics and
user feedback mechanisms implemented to evaluate the user experience and overall
performance of the augmented reality platform. Through systematic testing, this chapter
aims to validate the system's adherence to requirements, identify potential issues, and
provide insights into the effectiveness and efficiency of the AR Furniture project.

6.1. Use Case Testing

Use Case Testing ensures the proper functionality of individual use cases within the AR
Furniture system. It involves rigorous examination of expected user interactions to
validate system responses. This phase includes both positive and negative test scenarios,
aiming to guarantee that the platform aligns precisely with specified use cases. The
section outlines methodologies, scenarios, and outcomes of this testing process.

6.2. Equivalence partitioning

Optimizing test scenarios by dividing input data into equivalent classes, efficiently
covering a range of inputs to identify potential system vulnerabilities.

6.3. Boundary value analysis

Focused testing technique examining the system's behavior at boundaries, ensuring
robust handling of edge cases. Validates that the AR Furniture system performs
accurately and reliably near the limits of specified input ranges.

Faculty of CS&IT, Superior University Lahore, Pakistan 36

 Project Report: < write Project title here>

6.4. Data flow testing

A testing method scrutinizing the flow of data within the AR Furniture system. It verifies
the correct transfer and processing of data between components to ensure the integrity
and accuracy of information throughout the platform.

6.5. Unit testing

Comprehensive testing of individual units or components within the AR Furniture
system to validate their correctness and functionality. This phase ensures that each unit
performs as intended, contributing to the overall reliability and stability of the entire
system.

6.6. Integration testing

Testing the combined functionality of interconnected components in the AR Furniture
system to validate seamless communication and collaboration. This phase identifies and
rectifies issues arising from the integration of modules, ensuring the cohesive
performance of the entire system.

6.7. Performance testing

Evaluating the responsiveness, speed, and scalability of the AR Furniture system under
varying conditions. This testing phase ensures that the platform performs efficiently,
meeting expected response times and accommodating different levels of user demand.

6.8. Stress Testing

Assessing the robustness and reliability of the AR Furniture system under extreme
conditions, pushing it beyond normal operational limits. This testing phase identifies

Faculty of CS&IT, Superior University Lahore, Pakistan 37

 Project Report: < write Project title here>

potential points of failure and ensures the system's resilience under stress, contributing
to enhanced stability and performance.

Faculty of CS&IT, Superior University Lahore, Pakistan 38

 Project Report: < write Project title here>

Chapter 7
Summary, Conclusion and
Future Enhancements

Faculty of CS&IT, Superior University Lahore, Pakistan 39

 Project Report: < write Project title here>

Chapter 7: Summary, Conclusion & Future Enhancements

7.1. Project Summary

The AR Furniture project successfully developed an augmented reality platform,
transforming furniture retail. Enabling personalized visualization and customization, it
minimizes returns and elevates customer satisfaction. The platform's integration of
advanced technologies positions it as a sales-boosting innovation in the industry.

7.2. Achievements and Improvements

Achievements:

Successful Platform Development: The AR Furniture platform was effectively developed,

providing an interactive and engaging augmented reality experience for users.
Enhanced Customer Engagement: The platform succeeded in increasing customer engagement
by allowing personalized visualization and customization of furniture products.
Reduced Returns: Implementation of AR technology contributed to a notable reduction in
returns, particularly due to improved visualization and customization features.
Competitive Differentiation: The project positioned furniture retailers uniquely in the market
by offering a distinctive AR-based service, setting them apart from competitors.
Improvements:

User Interface Refinement: Consider refining the user interface for even more intuitive and
seamless interactions, ensuring a smoother user experience.
Expanded Product Catalog: Explore opportunities to expand the product catalog, providing
users with an even wider range of furniture options for visualization.
Performance Optimization: Continuously optimize platform performance, particularly focusing
on rendering speed and response time for an enhanced user experience.

Faculty of CS&IT, Superior University Lahore, Pakistan 40

 Project Report: < write Project title here>

Integration with E-commerce: Consider further integration with e-commerce platforms to

streamline the purchase process directly from the AR interface.

7.3. Critical Review

Strengths:

Technological Innovation: Successfully integrated AR technology for a cutting-edge solution.

Market Impact: Positioned uniquely in the market, reducing returns and enhancing customer
engagement.
Areas for Improvement:

Usability: Refine user interface for optimal usability.

Product Catalog: Expand offerings for a more comprehensive user experience.
Performance Optimization: Continue efforts to enhance platform performance.
E-commerce Integration: Streamline purchase process through improved integration.

Recommendations:

Usability Testing: Conduct thorough usability testing for user-friendly interactions.

Agile Development: Adopt an agile approach for iterative improvements.
Market Research: Stay informed on evolving customer expectations.
Feedback Mechanism: Establish a robust feedback system for continuous improvement.

Faculty of CS&IT, Superior University Lahore, Pakistan 41

 Project Report: < write Project title here>

7.4. Lessons Learnt

The AR Furniture project has been a catalyst for significant insights. Prioritizing a user-
centric focus, embracing agile methodologies, and staying attuned to market dynamics
emerged as crucial lessons. The interdisciplinary collaboration and efficient feedback
mechanisms underscored the importance of continuous improvement. For future
projects, the emphasis on iterative development, diverse feedback channels, cross-
functional teams, and fostering a culture of continuous learning will be integral. These
lessons provide a roadmap for refined project management, ensuring adaptability and
innovation in the evolving landscape of technological solutions.

7.5. Future Enhancements/Recommendations

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
Looking ahead, the AR Furniture project could significantly advance by expanding its AR
features for a more immersive user experience and introducing advanced customization
options to heighten personalization. Strengthening e-commerce integration and
optimizing the purchasing process are pivotal for enhancing transactional efficiency.
Exploring emerging technologies such as virtual reality and integrating machine learning
for personalized recommendations would propel the platform into the forefront of
innovation. Furthermore, ensuring mobile optimization across various devices will be
critical for sustaining a seamless AR experience. These recommendations collectively aim
to position the AR Furniture platform as a dynamic and innovative solution within the
evolving landscape of augmented reality and e-commerce.

Faculty of CS&IT, Superior University Lahore, Pakistan 42

 Project Report: < write Project title here>

Faculty of CS&IT, Superior University Lahore, Pakistan 43

 Project Report: < write Project title here>

Appendices

Faculty of CS&IT, Superior University Lahore, Pakistan 44

 Project Report: < write Project title here>

Appendix A: User Manual

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this appendix all about]

Appendix A: Appendix Title

[Appendix Heading 1]: [20 pt, Calibri, Bold, Left aligned]
Text in 12-Point Size, Times New Roman, 1.5 Line Spacing.

A.1. First Level heading [16 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

A.1.1. Second level heading [14 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

A.1.1.1. Third level heading [12 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 45

 Project Report: < write Project title here>

Appendix B: Administrator Manual

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this appendix all about]

B.1. First Level heading [16 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

B.1.1. Second level heading [14 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

B.1.1.1. Third level heading [12 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 46

 Project Report: < write Project title here>

Appendix C: Information / Promotional Material

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this appendix all about]

C.1. Broacher

Faculty of CS&IT, Superior University Lahore, Pakistan 47

 Project Report: < write Project title here>

C.2. Flyer

Faculty of CS&IT, Superior University Lahore, Pakistan 48

 Project Report: < write Project title here>

C.3. Standee

C.4. Banner

C.5. First Level heading [16 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 49

 Project Report: < write Project title here>

C.1.1. Second level heading [14 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

C.1.1.1. Third level heading [12 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Appendix [no.]: Appendix Title

[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]
[Between 4 to 8 lines describe what is this chapter all about]

Faculty of CS&IT, Superior University Lahore, Pakistan 50

 Project Report: < write Project title here>

A.1. First Level heading [16 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

A.1.1. Second level heading [14 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

C.1.1.2. Third level heading [12 pt, Calibri, Bold, Left aligned]
[Paragraph Text 12 pt, Calibri, 1.5 Line Spacing, Justified]

Faculty of CS&IT, Superior University Lahore, Pakistan 51

 Project Report: < write Project title here>

Reference and
Bibliography

Faculty of CS&IT, Superior University Lahore, Pakistan 52

 Project Report: < write Project title here>

Reference and Bibliography

[1] M. Sher, M. Rehman, “Title of the Paper” Conference name/Journal Name, Edition,
Volume, Issue, ISBN/ISSN, PP, Publisher/City-Country, Year.
[2] ……

Faculty of CS&IT, Superior University Lahore, Pakistan 53

 Project Report: < write Project title here>

Index

Faculty of CS&IT, Superior University Lahore, Pakistan 54

 Project Report: < write Project title here>

Index

[A]

[B]

[C]

Faculty of CS&IT, Superior University Lahore, Pakistan 55

 Project Report: < write Project title here>

Faculty of CS&IT, Superior University Lahore, Pakistan 56

 Project Report: < write Project title here>

Faculty of CS&IT, Superior University Lahore, Pakistan 57