Scribd Logo
Upload

Welcome to Scribd!

  • 19 views

    SikaMonoTop 620MY en MY (11 2018) 1 1

    Uploaded by

    chanqiming51
    Sika MonoTop-620 MY is a one-part cementitious polymer-modified mortar used as a pore sealer, fairing coat, and finishing top coat for concrete and concrete repair patches. It has high mechanical strengths, bonds well to substrates, and is easily applied by trowel or spray. When mixed with water, Sika MonoTop-620 MY forms a light grey mortar that can be applied in layers 1.5-5.0 mm thick to seal pores and provide a smooth, even surface finish.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    SikaMonoTop 620MY en MY (11 2018) 1 1

    Uploaded by

    chanqiming51
    19 views3 pages
    Sika MonoTop-620 MY is a one-part cementitious polymer-modified mortar used as a pore sealer, fairing coat, and finishing top coat for concrete and concrete repair patches. It has high mechanical strengths, bonds well to substrates, and is easily applied by trowel or spray. When mixed with water, Sika MonoTop-620 MY forms a light grey mortar that can be applied in layers 1.5-5.0 mm thick to seal pores and provide a smooth, even surface finish.

    Original Title

    SikaMonoTop-620MY-en-MY-(11-2018)-1-1

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Sika MonoTop-620 MY is a one-part cementitious polymer-modified mortar used as a pore sealer, fairing coat, and finishing top coat for concrete and concrete repair patches. It has high mechanical strengths, bonds well to substrates, and is easily applied by trowel or spray. When mixed with water, Sika MonoTop-620 MY forms a light grey mortar that can be applied in layers 1.5-5.0 mm thick to seal pores and provide a smooth, even surface finish.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    19 views3 pages

    SikaMonoTop 620MY en MY (11 2018) 1 1

    Uploaded by

    chanqiming51
    Sika MonoTop-620 MY is a one-part cementitious polymer-modified mortar used as a pore sealer, fairing coat, and finishing top coat for concrete and concrete repair patches. It has high mechanical strengths, bonds well to substrates, and is easily applied by trowel or spray. When mixed with water, Sika MonoTop-620 MY forms a light grey mortar that can be applied in layers 1.5-5.0 mm thick to seal pores and provide a smooth, even surface finish.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    PRODUCT DATA SHEET

    Sika MonoTop®-620 MY
    PORE SEALER / FAIRING COAT

    DESCRIPTION CHARACTERISTICS / ADVANTAGES


    Sika MonoTop®-620 MY is a one-part cementitious ▪ One part system, requires only the addition of water
    polymer-modified mortar containing silica fume. It is ▪ Easily applied and worked
    used as a superior finishing and protective top coat for ▪ Application by trowel or spray
    concrete and concrete repair patches. ▪ Adjustable consistency to suit application
    ▪ High mechanical strengths
    USES ▪ Excellent bonding to substrate
    ▪ Non toxic
    ▪ As a pore sealer/finishing coat to concrete, mortar ▪ Non corrosive
    patches and screeds. It can be used in vertical, hori-
    zontal and overhead applications
    ▪ Restores the appearance of honeycombed or surface
    impaired concrete
    ▪ As a thin skin protective coating to concrete where
    the reinforcement is susceptible to corrosion
    ▪ To repair small defects on edges and joint sides, to
    form and finish joints and covings

    PRODUCT INFORMATION
    Packaging 25 kg bag
    Appearance / Colour Light grey mortar
    Shelf Life 6 months from the date of production
    Storage Conditions Store properly in original, unopened and undamaged sealed packaging in
    dry conditions at temperatures between +10 °C and +25 °C. Keep away
    from direct sunlight, rain and water.
    Density ~1.2 kg/l

    TECHNICAL INFORMATION
    Compressive Strength 30–35 N/mm² (28 days / +25 °C) (ASTM C109)

    SYSTEM INFORMATION

    Product Data Sheet


    Sika MonoTop®-620 MY
    November 2018, Version 01.01
    020302050010000086

    1/3
    System Structure Sika MonoTop® System comprises:
    ▪ Sika MonoTop®-610 MY bonding bridge and reinforcement protection
    ▪ Sika MonoTop®-615 SD or Sika MonoTop® R or Sika MonoTop® R40 re-
    pair mortar
    ▪ Sika MonoTop®-620 MY pore sealer / fairing coat

    APPLICATION INFORMATION
    Mixing Ratio 4.5 L of clean water per 25 kg bag
    Fresh Mortar Density ~2.0 kg/l
    Consumption ~1.65 kg of powder per m² per 1 mm thickness (depending on substrate
    condition)
    Layer Thickness 1.5–5.0 mm (per coat)
    Ambient Air Temperature +5 °C min. / +35 °C max.
    Substrate Temperature +5 °C min. / +35 °C max.
    Pot Life 60 minutes
    Curing Treatment To achieve the full potential of any cement based product, curing is essen-
    tial. This can be carried out with the application of a curing compound such
    as Antisol®-E (1 time application only) or with other curing practices such
    as covering with polythene sheets or damp hessian for 3 days.

    APPLICATION INSTRUCTIONS All technical data stated in this Product Data Sheet are
    based on laboratory tests. Actual measured data may
    SUBSTRATE QUALITY / PRE-TREATMENT vary due to circumstances beyond our control.

    Substrate must be sound, clean and free from oil, LOCAL RESTRICTIONS
    grease, laitance and any loose particles. Special care
    must be taken to ensure that the substrate does not Please note that as a result of specific local regula-
    contain any coating, such as a curing membrane or re- tions the performance of this product may vary from
    lease agent that will prevent the Sika MonoTop®-620 country to country. Please consult the local Product
    MY from adhering to the surface. Data Sheet for the exact description of the application
    fields.
    MIXING
    Add the powder to the desired quantity of water. Mix ECOLOGY, HEALTH AND SAFETY
    with an electric drill and mixing paddle attachment at For information and advice on the safe handling, stor-
    500 rpm. Mixing at higher speeds may entrain air age and disposal of chemical products, users shall refer
    which will affect the finishing properties of the mortar. to the most recent Safety Data Sheet (SDS) containing
    APPLICATION physical, ecological, toxicological and other safety-re-
    lated data.
    Sika MonoTop®-620 MY must be applied to a pre-
    dampened substrate. Apply by trowel or by air driven LEGAL NOTES
    spray equipment.
    Best results are obtained when the substrate and am- The information, and, in particular, the recommenda-
    bient temperatures are falling. After application, when tions relating to the application and end-use of Sika
    the mortar has stiffened but not dried, various meth- products, are given in good faith based on Sika's cur-
    ods may be employed to obtain the required surface rent knowledge and experience of the products when
    finish, for example plasterer's tools to obtain a flat properly stored, handled and applied under normal
    smooth even surface, sponge finish, etc. The addition conditions in accordance with Sika’s recommenda-
    of water to the surface to obtain the desired finish is tions. In practice, the differences in materials, sub-
    not recommended as this may cause colour variations strates and actual site conditions are such that no war-
    and surface cracking. ranty in respect of merchantability or of fitness for a
    particular purpose, nor any liability arising out of any
    CLEANING OF TOOLS legal relationship whatsoever, can be inferred either
    from this information, or from any written recom-
    Clean all tools and application equipment with water mendations, or from any other advice offered. The
    immediately after use. Hardened or cured material can user of the product must test the product’s suitability
    only be mechanically removed. for the intended application and purpose. Sika re-
    serves the right to change the properties of its
    BASIS OF PRODUCT DATA products. The proprietary rights of third parties must

    Product Data Sheet


    Sika MonoTop®-620 MY
    November 2018, Version 01.01
    020302050010000086

    2/3
    be observed. All orders are accepted subject to our
    current terms of sale and delivery. Users must always
    refer to the most recent issue of the local Product Data
    Sheet for the product concerned, copies of which will
    be supplied on request.

    Sika Kimia Sdn. Bhd.


    Lot 689, Nilai Industrial Estate, 71800 Nilai
    Negeri Sembilan D.K., Malaysia
    Phone: +606-7991762
    Fax: +606-7991980
    e-mail: [email protected]
    Website: www.sika.com.my

    SikaMonoTop-620MY-en-MY-(11-2018)-1-1.pdf

    Product Data Sheet


    Sika MonoTop®-620 MY
    November 2018, Version 01.01
    020302050010000086

    3/3

    You might also like