EVOHD

Programming Guide
Version 1.11 and higher

www.paradox.com
Warranty
For complete warranty information on this product please refer to the Limited Warranty Statement found on our Web site: www.paradox.com. Your use of
this Paradox product signifies your acceptance of all warranty terms and conditions.
© 2002-2014 Paradox Ltd. All rights reserved. Specifications may change without prior notice. One or more of the following patents may apply: 2,292,187
and RE#39406.

Digiplex, Digiplex EVO, Magellan, and BabyWare are trademarks or registered trademarks of Paradox Ltd. or its affiliates in Canada, the United States and/
or other countries. For the latest information on products approvals, such as UL and CE, please visit www.paradox.com.

Limitations of Alarm Systems

It must be understood that while your Paradox alarm system is highly advanced and secure, it does not offer any guaranteed protection against burglary,
fire or other emergency (fire and emergency options are only available on certain Paradox models). This is due to a number of reasons, including by not
limited to inadequate or improper installation/positioning, sensor limitations, battery performance, wireless signal interruption, inadequate maintenance
or the potential for the system or telephone lines to be compromised or circumvented. As a result, Paradox does not represent that the alarm system will
prevent personal injury or property damage, or in all cases provide adequate warning or protection.

Your security system should therefore be considered as one of many tools available to reduce risk and/or damage of burglary, fire or other emergencies,
such other tools include but are not limited to insurance coverage, fire prevention and extinguish devices, and sprinkler systems.

We also strongly recommend that you regularly maintain your security systems and stay aware of new and improved Paradox products and
developments.

Warning for Connections to Non-Traditional Telephony (e.g., VoIP)

Paradox alarm equipment was designed to work effectively around traditional telephone systems. For those customers who are using a Paradox alarm
panel connected to a non-traditional telephone system, such as Voice Over Internet Protocol (VoIP) that converts the voice signal from your telephone to
a digital signal traveling over the Internet, you should be aware that your alarm system may not function as effectively as with traditional telephone
systems.

For example, if your VoIP equipment has no battery back-up, during a power failure your system's ability to transmit signals to the central station may be
compromised. Or, if your VoIP connection becomes disabled, your telephone line monitoring feature may also be compromised. Other concerns would
include, without limitation, Internet connection failures which may be more frequent than regular telephone line outages.

We therefore strongly recommend that you discuss these and other limitations involved with operating an alarm system on a VoIP or other non-traditional
telephone system with your installation company. They should be able to offer or recommend measures to reduce the risks involved and give you a better
understanding.
EVOHD • Programming Guide

Things You Need to Know

About this Programming Guide
Use this programming guide to record programmed settings for your Digiplex EVOHD control panel. This guide should be used
along with the Digiplex EVOHD Reference and Installation Manual (available online only) whenever installing or programming your
Digiplex EVOHD system.

Conventions
The following typographical conventions are used throughout this guide:
Section numbers appear in bold typeface, enclosed by brackets: e.g., Enter a section number WARNING: Important information
between [0501]...

Keypad keys and control panel labels appear in small caps, bold typeface: e.g., Press 0, and then NOTE: Suggestion or reminder
ENTER to clear a zone’s serial number...

Default Settings: Values which appear in bold typeface and/or are preceded by the symbol , signify the default value:
e.g., User code length:  6 digits  4 digits (4 digits is the default value)

Installer Code
The default installer code is 000000. This code allows you to enter programming mode, where you can program all features,
options, and commands of your EVOHD control panel. To change the installer code, see Installer Code Programming on page 30.
System Master Code
The default system master code is 1234 or 123456. This code allows you to use any arming method, as well as program user codes.
This code can be either four or six digits long.
Panel Reset
Performing a panel reset will reset all panel settings to their preset, default values, or custom settings (if already programmed).
To perform a panel reset:
1. Press and hold the panel’s reset button until the status LED flashes fast (5 seconds).
2. Release the reset button, and then push it once more, within two seconds, or refer to Software Reset on page 56.

Entering Programming Mode

To enter programming mode, proceed as follows:
1. Press and hold the 0 key.
2. Enter your installer code (default is 000000). See Installer Code for details.
3. Enter the four-digit section you wish to program.
4. Enter the required data and record your settings using the worksheets included in this guide.
EN 50131 Compliancy
To have your EVOHD panel compliant with EN 50131 standards, see Appendix A.
Decimal and Hexadecimal Programming Table
Certain sections may require the entry of one or more hexadecimal values from 0 to F.
K641/K641+/K641R/K641LX Keypads
Table 1: Decimal and hexadecimal values using the K641,K641+, K641R, or K641LX keypads

Key Value or Action

0 to 9 0 to 9 (hex and decimal)
STAY A (hex only)
FORCE B (hex only)
ARM C (hex only)
DISARM D (hex only)
BYP E (hex only)
MEM F (hex only)
CLEAR Exit section without saving (hex and decimal)
ENTER Save current data and advance to next section (hex only)

Version 1.0 Things You Need to Know | 3

 EVOHD • Programming Guide

K656 Keypad
Table 2: Decimal and hexadecimal values using the k656 keypad

Key Value or Action

0 to 9 0 to 9 (hex and decimal)
ARM A (hex only)
SLEEP B (hex only)
STAY C (hex only)
OFF D (hex only)
MENU E (hex only)
F (hex only)
CLEAR Exit section without saving (hex and decimal)
ENTER Save current data and advance to next section (hex only)

Grafica Keypads
Table 3: Decimal and hexadecimal values using Grafica keypads

Key Value or Action

0 to 9 values 0 to 9 respectively
# A to F (press the # key until the desired letter appears)
Right action key (Exit) Exit section without saving
Central action key (Save) Save current data and advance to next section

4 | Things You Need to Know Version 1.0

 Table of Contents
Serial Number List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Installer Function Keys ................................................................................................ 56
Zone Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Automatic Report Codes ........................................................................................... 57
Keyswitch Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Contact ID Report Codes ........................................................................................... 60
Keyswitch Numbering ................................................................................................ 18 Keypad Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
Keyswitch Parameters ................................................................................................. 18 K641/K641+/K641R/K641LX/K656, and TM50 ................................................... 62
Keyswitch Arming/Disarming Report Codes ...................................................... 18 Wireless Receiver Options ......................................................................................... 64
Panic Input Option ....................................................................................................... 18 Remote Control Options ............................................................................................ 64
Programmable Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Viewing Serial Numbers ............................................................................................. 64
PGM Test Mode ............................................................................................................. 20 Wireless Zone Assignment ........................................................................................ 64
PGM Delays ..................................................................................................................... 20 Wireless Transmitter Signal Strength .................................................................... 65
PGM Options .................................................................................................................. 20 Current Battery Life ...................................................................................................... 65
PGM Programming ...................................................................................................... 20 Previous Battery Life .................................................................................................... 65
Event and Feature Groups ......................................................................................... 21 Wireless PGM Signal Strength ................................................................................. 65
Utility Keys ....................................................................................................................... 30 Wireless 2WPGM Serial Numbers ........................................................................... 65
Input Speeds ..................................................................................................................30 Wireless 2WPGM Activation/Deactivation Events ............................................ 66
Installer Code Programming .................................................................................... 30 2WPGM Delays .............................................................................................................. 66
User Code Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Partition One-touch Options .................................................................................... 66
Label Programming ..................................................................................................... 67
Arming and Disarming Report Codes . . . . . . . . . . . . . . . . . . . . . . . . 32
Using the Memory Key ............................................................................................... 68
Access Control Sections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Combus Voltmeter ....................................................................................................... 68
Assigning Doors to the System ............................................................................... 33 Updating Firmware Using BabyWare .................................................................... 68
Schedule Programming ............................................................................................. 34
Milliamp Consumption ............................................................................................... 69
Backup Schedules ......................................................................................................... 35
Connecting the Combus in Noisy Environments ............................................. 70
Access Levels .................................................................................................................. 36
Trouble Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Holidays ............................................................................................................................ 36
K641/K641+/K641R/K641LX ..................................................................................... 71
Keypad Numbering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36 K656 ................................................................................................................................... 71
Remote Control Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Grafica ............................................................................................................................... 71
Remote Control Templates ....................................................................................... 37 Trouble Groups ............................................................................................................. 71
Control Panel Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 Appendix A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
System Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39 EN 50131 Programming ............................................................................................. 73
Dialer Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 PCS Module Programming (EN 50131 Compliancy) ........................................ 73
Additional Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Control Panel Settings ................................................................................................ 73
Schedule Tolerance Window .................................................................................... 42 System Options (EN 50131 Compliancy) ............................................................. 73
AutoTest Report Settings ........................................................................................... 42 Partition Timers ............................................................................................................. 76
Timings ............................................................................................................................. 42 Appendix B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Communication Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 EOL and ATZ Options per Zone Input and Tamper Options per Zone ..... 77
Account Numbers ........................................................................................................ 43 Selectable Input Resistor for EOL and Contact .................................................. 78
Reporting Formats ....................................................................................................... 43
System Event Call Direction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
PCS GSM/GPRS Communicator Module . . . . . . . . . . . . . . . . . . . . . . 45
BabyWare/PCS Module Connection ...................................................................... 45
PCS Module Programming ........................................................................................ 45
PCS Module (GSM) Programming .......................................................................... 45
SMS Site Name ............................................................................................................... 46
IP150/PCS Module (GPRS) Options ........................................................................ 46
IP/GPRS Reporting Account Programming ......................................................... 46
IP Module/PCS Module Report Code Programming ....................................... 47
Partition Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Auto-arm Times ............................................................................................................. 48
Arming/Disarming Report Schedules ................................................................... 48
Partition Timers ............................................................................................................. 49
Partition Options 1 ....................................................................................................... 49
Partition Arming/Disarming Options .................................................................... 51
Partition Panic Alarm Options .................................................................................. 51
Partition Bell Squawk Options ................................................................................. 51
Partition One-touch Options .................................................................................... 52
Partition Special Options ........................................................................................... 52
Partition Arming/Disarming Event Call Direction ............................................. 52
Partition Alarm/Alarm Restore Event Call Direction ........................................ 53
Partition Tamper/Tamper Restore Event Call Direction ................................. 53
Special Arming Exit Delay .......................................................................................... 53
No Movement Schedule ............................................................................................ 54
Special Report Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Trouble Report Codes ................................................................................................. 55
Additional Settings and Modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Automatic Report Code Programming ................................................................ 56
Software Reset ............................................................................................................... 56

Version 1.0 |5
 EVOHD • Programming Guide

List of Worksheets
System Planning ................................................................................................................................................................................................................................................................................... 7
Zone Information .............................................................................................................................................................................................................................................................................. 12
Zone Report Codes ............................................................................................................................................................................................................................................................................15
Zone Labels ..........................................................................................................................................................................................................................................................................................16
Keyswitch Numbering and Parameters ......................................................................................................................................................................................................................................19
Arming and Disarming with Keyswitch Report Codes ..........................................................................................................................................................................................................19
PGM Delays ...........................................................................................................................................................................................................................................................................................20
PGM Programming ............................................................................................................................................................................................................................................................................20
Input Speeds ........................................................................................................................................................................................................................................................................................30
Installer Code Programming ..........................................................................................................................................................................................................................................................30
Arming and Disarming Report Codes .........................................................................................................................................................................................................................................32
Assigning Doors ..................................................................................................................................................................................................................................................................................33
Programming Primary Schedules .................................................................................................................................................................................................................................................34
Programming Secondary Schedules ...........................................................................................................................................................................................................................................35
Programming Backup Schedules .................................................................................................................................................................................................................................................35
Programming Access Levels ...........................................................................................................................................................................................................................................................36
Programming Holidays ....................................................................................................................................................................................................................................................................36
Numbering Keypads ..........................................................................................................................................................................................................................................................................37
Programming Remote Controls ....................................................................................................................................................................................................................................................39
Control Panel Settings ......................................................................................................................................................................................................................................................................40
Schedule Tolerance Window .........................................................................................................................................................................................................................................................44
AutoTest Report Settings ................................................................................................................................................................................................................................................................44
Timings Settings .................................................................................................................................................................................................................................................................................44
Account Number Settings ...............................................................................................................................................................................................................................................................45
Reporting Formats for Section [3070] .........................................................................................................................................................................................................................................45
Reporting Formats for Sections [3071] to [3074] ....................................................................................................................................................................................................................46
VDMP3 Settings ..................................................................................................................................................................................................................................................................................47
VDMP3 functions for Sections [3091] to [3098] .......................................................................................................................................................................................................................47
BabyWare/PCS Module Connection Settings ..........................................................................................................................................................................................................................48
PCS Module (GSM) Settings ............................................................................................................................................................................................................................................................48
SMS Site Name Settings ...................................................................................................................................................................................................................................................................49
IP Account Number Settings ..........................................................................................................................................................................................................................................................49
IP Receiver 1 Configuration ............................................................................................................................................................................................................................................................49
IP Receiver 2 Configuration ............................................................................................................................................................................................................................................................50
IP Receiver 3 Configuration ............................................................................................................................................................................................................................................................50
IP Receiver 4 Configuration ............................................................................................................................................................................................................................................................50
PCS Module Report Codes ..............................................................................................................................................................................................................................................................50
IP Module Report Codes ..................................................................................................................................................................................................................................................................50
Partition Label Settings for Sections [3100] to [3800] ...........................................................................................................................................................................................................51
Auto-arm Time Settings ...................................................................................................................................................................................................................................................................51
Arming Report Schedule Settings ................................................................................................................................................................................................................................................51
Disarming Report Schedule Settings ..........................................................................................................................................................................................................................................51
Partition Timer Settings ...................................................................................................................................................................................................................................................................52
Special Arming Exit Delay Settings ..............................................................................................................................................................................................................................................56
No Movement Schedule Settings .................................................................................................................................................................................................................................................57
Special Report Code Settings .........................................................................................................................................................................................................................................................57
Trouble Report Code Settings .......................................................................................................................................................................................................................................................58
Keypad Settings for Sections [007] to [013] ..............................................................................................................................................................................................................................67
Door Unlocked Schedule (K641R only) .......................................................................................................................................................................................................................................67
PGM Activation and Deactivation ................................................................................................................................................................................................................................................67
Wireless Zones .....................................................................................................................................................................................................................................................................................68
2WPGM Serial Numbers ...................................................................................................................................................................................................................................................................69
2WPGM Activation/Deactivation Events ...................................................................................................................................................................................................................................70
2WPGM Delays ....................................................................................................................................................................................................................................................................................70
Milliamp Consumption of Various Devices ...............................................................................................................................................................................................................................74

6 | Table of Contents Version 1.0

EVOHD • Programming Guide

Serial Number List

Worksheet 1: System Planning
Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker
1 2 3 4 5 6

7 8 9 10 11 12

13 14 15 16 17 18

19 20 21 22 23 24

25 26 27 28 29 30

31 32 33 34 35 36

37 38 39 40 41 42

43 44 45 46 47 48

49 50 51 52 53 54

55 56 57 58 59 60

61 62 63 64 65 66

67 68 69 70 71 72

73 74 75 76 77 78

79 80 81 82 83 84

85 86 87 88 89 90

Version 1.0 Serial Number List | 7

 EVOHD • Programming Guide

Worksheet 1: System Planning (Continued)

Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker
91 92 93 94 95 96

97 98 99 100 101 102

103 104 105 106 107 108

109 110 111 112 113 114

115 116 117 118 119 120

121 122 123 124 125 126

127 128 129 130 131 132

133 134 135 136 137 138

139 140 141 142 143 144

145 146 147 148 149 150

151 152 153 154 155 156

157 158 159 160 161 162

163 164 165 166 167 168

169 170 171 172 173 174

175 176 177 178 179 180

181 182 183 184 185 186

8 | Serial Number List Version 1.0

EVOHD • Programming Guide

Worksheet 1: System Planning (Continued)

Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker Serial # Sticker
187 188 189 190 191 192

193 194 195 196 197 198

199 200 201 202 203 204

205 206 207 208 209 210

211 212 213 214 215 216

217 218 219 220 221 222

223 224 225 226 227 228

229 230 231 232 233 234

235 236 237 238 239 240

241 242 243 244 245 246

247 248 249 250 251 252

253 254

Version 1.0 Serial Number List | 9

 EVOHD • Programming Guide

Zone Programming
Use the following section to program all zones on your EVOHD control panel. IMPORTANT: To set EOL and ATZ options as well as Tamper Options for each
zone, See “Appendix A” on page 73.
To program zones:
1. Enter section [0400].
2. Enter the zone number you wish to program.
NOTE: In any zone programming option, pressing acc on the K641/K641+/K641R/K641LX, or on the K656, will save the data and access the next zone on the same
option screen. Pressing trbl on the K641/K641+/K641R/K641LX, or on the K656, will save the data and return to the previous zone on the same option screen.
3. Enter the zone’s eight-digit serial number, then it’s three-digit input number (the input number is not needed for modules with only one input). Press
0, and then ENTER to clear a zone’s serial number. Use worksheet 2 on page 12, to record the information.
NOTE: When programming a keypad zone for the K641/K641+/K641R, K656, K07C, or the TM50 keypads, enter the input number 001. For the K641LX, enter input
number 033.
4. Enter the following zone parameters; default setting is (01) (*2*4***):
a. Zone definition, by referring to table 4.
b. Partition, by referring to table 5.
c. Zone option, by referring to table 6.
d. Zone extended option (1*******), by referring to table 9.

5. Enter the zone’s report codes, by referring to table 7; default: (00) (00) (00) (00). Use worksheet 4 on page 17, to record the information.
6. Enter the zone’s label. Use worksheet 4 on page 17, to record the information.
7. Press enter to save and proceed to the next zone.
8. Pressing clear twice will exit the zone programming menus. To save your modifications, make sure to press enter before pressing clear.

Table 4: Zone definitions for EVOHD Table 5: Partition assignment for EVOHD Table 6: Zone options for EVOHD

Input Value Description Input Value Description Input Value(s) Description

0 Disabled (default) 1 Assign to partition 1 1 Auto zone shutdown enabled

1 Entry delay 1 2 Assign to partition 2 2 Bypass enabled (default: ON)
2 Entry delay 2 3 Assign to partition 3 3 Stay zone
3 Follow 4 Assign to partition 4 4 Force zone (default: ON)
4 Instant 5 Assign to partition 5 5 OFF 6 OFF (Zone Alarm) Steady alarm
5 24 hr. buzzer 6 Assign to partition 6 5 OFF 6 ON (Zone Alarm) Pulsed alarm
6 24 hr. burglary 7 Assign to partition 7 5 ON 6 OFF (Zone Alarm) Silent alarm
7 24 hr. hold-up 8 Assign to partition 8 5 ON 6 ON (Zone Alarm) Report only
8 24 hr. gas 7 Intellizone
9 24 hr. heat 8 Delay before transmission
A 24 hr. water
B 24 hr. freeze
C Delayed 24 hr. fire
D Standard 24 hr. fire
E Stay delay 1
F Stay delay 2/Anti-mask

10 | Zone Programming Version 1.0

EVOHD • Programming Guide

Table 7: Zone report codes for EVOHD

Alarm Report Code Alarm Restore Report Code Tamper Report Code Tamper Restore Report Code

___/___ ___/___ ___/___ ___/___

For Ademco Slow, Silent Knight Fast, Sescoa, Ademco Express, or pager formats, key-in desired two-digit hex values from 00 to FF.
Ademco Format
Use section [4032] to program a set of default Ademco report codes from the Automatic Report Code Programming on page 57. Then to program the remaining report
codes or to change some of the defaults, enter the individual sections and key-in the desired two-digit hex value found in the Contact ID Report Code List on page 60.
SIA Format
Use section [4032] to program a set of SIA report codes from the Automatic Report Code Programming on page 57. Codes that have not been set to default can be set to
default manually by entering FF in the appropriate section. To disable the reporting of an event, enter 00 in the appropriate section.

Table 8: Section Numbers used for zone programming Table 9: Zone extended options

Option Description ON
Zone Zone Serial & Input Zone Zone Report
Number Numbers Parameters Codes Zone tamper
(follow global
1 [0001] [0101] [0201] [0301] settings in
1 o Disabled  Enabled
2 [0002] [0102] [0202] [0302] section
[3034]
+ 1 per zone + 1 per zone + 1 per zone + 1 per zone option 5 & 6)
96 [0096] [0196] [0296] [0396] Zone tamper See See
2&3 - -
supervision Table 10 Table 10
Anti-mask
trouble
(follow global
4 settings in  Disabled  Enabled
section
[3029]
option 5 & 6)
Table 10: Zone tamper options
Anti-mask  See Table See
5&6 -
Option supervision  11 Table 11
Description
2 3 7 Future use  - - -
OFF OFF Disabled (default) 8 Future use  - - -
Generates trouble only (when armed or
OFF ON
disarmed)
When armed: alarm
ON OFF
When disarmed: generates trouble only
When armed: alarm
ON ON
When disarmed: generates audible alarm

Table 11: Anti-mask supervision options

Option
Description
5 6
OFF OFF Disabled (default)
Generates trouble only (when armed or
OFF ON
disarmed)
When armed: alarm
ON OFF
When disarmed: generates trouble only
When armed: alarm
ON ON
When disarmed: generates audible alarm

Version 1.0 Zone Programming | 11

 Worksheet 2: Zone Information
Zone Description Module Eight-digit Serial Number Input Number Zone Definition Partition Assignment Zone Options
1 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
2 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
3 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

12 | Zone Information
4 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
5 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
6 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
7 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
8 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
9 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
10 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
11 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
12 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
13 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
14 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
15 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
16 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
17 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
18 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
19 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
20 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
21 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
22 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
23 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
24 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
25 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
26 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
27 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
28 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
29 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
30 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
31 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
32 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
33 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
34 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
35 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
36 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
37 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
38 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
39 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
40 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
41 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
42 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
43 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
44 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
45 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
46 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
47 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

EVOHD Programming Guide • Zone Programming

48 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
 Worksheet 2: Zone Information (Continued)
Zone Description Module Eight-digit Serial Number Input Number Zone Definition Partition Assignment Zone Options
49 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
50 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
51 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
52 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
53 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
54 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
55 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
56 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
57 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
58 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
59 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

EVOHD Programming Guide • Zone Programming

60 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
61 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
62 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
63 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
64 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
65 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
66 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
67 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
68 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
69 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
70 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
71 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
72 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
73 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
74 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
75 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
76 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
77 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
78 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
79 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
80 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
81 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
82 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
83 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
84 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
85 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
86 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
87 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
88 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
89 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
90 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
91 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
92 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
93 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
94 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
95 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

Zone Information | 13
96 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
 Worksheet 2: Zone Information (Continued)
Zone Description Module Eight-digit Serial Number Input Number Zone Definition Partition Assignment Zone Options
97 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
98 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
99 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
100 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

14 | Zone Information
101 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
102 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
103 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
104 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
105 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
106 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
107 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
108 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
109 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
110 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
111 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
112 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
113 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
114 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
115 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
116 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
117 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
118 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
119 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
120 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
121 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
122 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
123 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
124 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
125 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
126 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
127 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
128 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
129 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
130 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
131 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
132 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
133 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
134 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
135 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
136 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
137 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
138 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
139 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
140 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
141 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
142 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
143 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

EVOHD Programming Guide • Zone Programming

144 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
 Worksheet 2: Zone Information (Continued)
Zone Description Module Eight-digit Serial Number Input Number Zone Definition Partition Assignment Zone Options
145 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
146 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
147 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
148 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
149 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
150 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
151 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
152 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
153 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
154 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
155 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

EVOHD Programming Guide • Zone Programming

156 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
157 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
158 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
159 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
160 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
161 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
162 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
163 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
164 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
165 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
166 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
167 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
168 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
169 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
170 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
171 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
172 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
173 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
174 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
175 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
176 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
177 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
178 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
179 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
180 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
181 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
182 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
183 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
184 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
185 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
186 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
187 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
188 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
189 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
190 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
191 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8

Zone Information | 15
192 __________________________________________ _______________ ___/___/___/___/___/___/___/___ ___/___/___ _____ _____ 1 2 3 4 5 6 7 8
 Worksheet 3: Zone Report Codes
Alarm Alarm Tamper Tamper Alarm Alarm Tamper Tamper Alarm Alarm Tamper Tamper Alarm Alarm Tamper Tamper
Zone Zone Zone Zone
Report Restore Report Restore Report Restore Report Restore Report Restore Report Restore Report Restore Report Restore
# # # #
Codes Report Codes Codes Report Codes Codes Report Codes Codes Report Codes Codes Report Codes Codes Report Codes Codes Report Codes Codes Report Codes
1 ___/___ ___/___ ___/___ ___/___ 49 ___/___ ___/___ ___/___ ___/___ 97 ___/___ ___/___ ___/___ ___/___ 145 ___/___ ___/___ ___/___ ___/___
2 ___/___ ___/___ ___/___ ___/___ 50 ___/___ ___/___ ___/___ ___/___ 98 ___/___ ___/___ ___/___ ___/___ 146 ___/___ ___/___ ___/___ ___/___

16 | Zone Report Codes

3 ___/___ ___/___ ___/___ ___/___ 51 ___/___ ___/___ ___/___ ___/___ 99 ___/___ ___/___ ___/___ ___/___ 147 ___/___ ___/___ ___/___ ___/___
4 ___/___ ___/___ ___/___ ___/___ 52 ___/___ ___/___ ___/___ ___/___ 100 ___/___ ___/___ ___/___ ___/___ 148 ___/___ ___/___ ___/___ ___/___
5 ___/___ ___/___ ___/___ ___/___ 53 ___/___ ___/___ ___/___ ___/___ 101 ___/___ ___/___ ___/___ ___/___ 149 ___/___ ___/___ ___/___ ___/___
6 ___/___ ___/___ ___/___ ___/___ 54 ___/___ ___/___ ___/___ ___/___ 102 ___/___ ___/___ ___/___ ___/___ 150 ___/___ ___/___ ___/___ ___/___
7 ___/___ ___/___ ___/___ ___/___ 55 ___/___ ___/___ ___/___ ___/___ 103 ___/___ ___/___ ___/___ ___/___ 151 ___/___ ___/___ ___/___ ___/___
8 ___/___ ___/___ ___/___ ___/___ 56 ___/___ ___/___ ___/___ ___/___ 104 ___/___ ___/___ ___/___ ___/___ 152 ___/___ ___/___ ___/___ ___/___
9 ___/___ ___/___ ___/___ ___/___ 57 ___/___ ___/___ ___/___ ___/___ 105 ___/___ ___/___ ___/___ ___/___ 153 ___/___ ___/___ ___/___ ___/___
10 ___/___ ___/___ ___/___ ___/___ 58 ___/___ ___/___ ___/___ ___/___ 106 ___/___ ___/___ ___/___ ___/___ 154 ___/___ ___/___ ___/___ ___/___
11 ___/___ ___/___ ___/___ ___/___ 59 ___/___ ___/___ ___/___ ___/___ 107 ___/___ ___/___ ___/___ ___/___ 155 ___/___ ___/___ ___/___ ___/___
12 ___/___ ___/___ ___/___ ___/___ 60 ___/___ ___/___ ___/___ ___/___ 108 ___/___ ___/___ ___/___ ___/___ 156 ___/___ ___/___ ___/___ ___/___
13 ___/___ ___/___ ___/___ ___/___ 61 ___/___ ___/___ ___/___ ___/___ 109 ___/___ ___/___ ___/___ ___/___ 157 ___/___ ___/___ ___/___ ___/___
14 ___/___ ___/___ ___/___ ___/___ 62 ___/___ ___/___ ___/___ ___/___ 110 ___/___ ___/___ ___/___ ___/___ 158 ___/___ ___/___ ___/___ ___/___
15 ___/___ ___/___ ___/___ ___/___ 63 ___/___ ___/___ ___/___ ___/___ 111 ___/___ ___/___ ___/___ ___/___ 159 ___/___ ___/___ ___/___ ___/___
16 ___/___ ___/___ ___/___ ___/___ 64 ___/___ ___/___ ___/___ ___/___ 112 ___/___ ___/___ ___/___ ___/___ 160 ___/___ ___/___ ___/___ ___/___
17 ___/___ ___/___ ___/___ ___/___ 65 ___/___ ___/___ ___/___ ___/___ 113 ___/___ ___/___ ___/___ ___/___ 161 ___/___ ___/___ ___/___ ___/___
18 ___/___ ___/___ ___/___ ___/___ 66 ___/___ ___/___ ___/___ ___/___ 114 ___/___ ___/___ ___/___ ___/___ 162 ___/___ ___/___ ___/___ ___/___
19 ___/___ ___/___ ___/___ ___/___ 67 ___/___ ___/___ ___/___ ___/___ 115 ___/___ ___/___ ___/___ ___/___ 163 ___/___ ___/___ ___/___ ___/___
20 ___/___ ___/___ ___/___ ___/___ 68 ___/___ ___/___ ___/___ ___/___ 116 ___/___ ___/___ ___/___ ___/___ 164 ___/___ ___/___ ___/___ ___/___
21 ___/___ ___/___ ___/___ ___/___ 69 ___/___ ___/___ ___/___ ___/___ 117 ___/___ ___/___ ___/___ ___/___ 165 ___/___ ___/___ ___/___ ___/___
22 ___/___ ___/___ ___/___ ___/___ 70 ___/___ ___/___ ___/___ ___/___ 118 ___/___ ___/___ ___/___ ___/___ 166 ___/___ ___/___ ___/___ ___/___
23 ___/___ ___/___ ___/___ ___/___ 71 ___/___ ___/___ ___/___ ___/___ 119 ___/___ ___/___ ___/___ ___/___ 167 ___/___ ___/___ ___/___ ___/___
24 ___/___ ___/___ ___/___ ___/___ 72 ___/___ ___/___ ___/___ ___/___ 120 ___/___ ___/___ ___/___ ___/___ 168 ___/___ ___/___ ___/___ ___/___
25 ___/___ ___/___ ___/___ ___/___ 73 ___/___ ___/___ ___/___ ___/___ 121 ___/___ ___/___ ___/___ ___/___ 169 ___/___ ___/___ ___/___ ___/___
26 ___/___ ___/___ ___/___ ___/___ 74 ___/___ ___/___ ___/___ ___/___ 122 ___/___ ___/___ ___/___ ___/___ 170 ___/___ ___/___ ___/___ ___/___
27 ___/___ ___/___ ___/___ ___/___ 75 ___/___ ___/___ ___/___ ___/___ 123 ___/___ ___/___ ___/___ ___/___ 171 ___/___ ___/___ ___/___ ___/___
28 ___/___ ___/___ ___/___ ___/___ 76 ___/___ ___/___ ___/___ ___/___ 124 ___/___ ___/___ ___/___ ___/___ 172 ___/___ ___/___ ___/___ ___/___
29 ___/___ ___/___ ___/___ ___/___ 77 ___/___ ___/___ ___/___ ___/___ 125 ___/___ ___/___ ___/___ ___/___ 173 ___/___ ___/___ ___/___ ___/___
30 ___/___ ___/___ ___/___ ___/___ 78 ___/___ ___/___ ___/___ ___/___ 126 ___/___ ___/___ ___/___ ___/___ 174 ___/___ ___/___ ___/___ ___/___
31 ___/___ ___/___ ___/___ ___/___ 79 ___/___ ___/___ ___/___ ___/___ 127 ___/___ ___/___ ___/___ ___/___ 175 ___/___ ___/___ ___/___ ___/___
32 ___/___ ___/___ ___/___ ___/___ 80 ___/___ ___/___ ___/___ ___/___ 128 ___/___ ___/___ ___/___ ___/___ 176 ___/___ ___/___ ___/___ ___/___
33 ___/___ ___/___ ___/___ ___/___ 81 ___/___ ___/___ ___/___ ___/___ 129 ___/___ ___/___ ___/___ ___/___ 177 ___/___ ___/___ ___/___ ___/___
34 ___/___ ___/___ ___/___ ___/___ 82 ___/___ ___/___ ___/___ ___/___ 130 ___/___ ___/___ ___/___ ___/___ 178 ___/___ ___/___ ___/___ ___/___
35 ___/___ ___/___ ___/___ ___/___ 83 ___/___ ___/___ ___/___ ___/___ 131 ___/___ ___/___ ___/___ ___/___ 179 ___/___ ___/___ ___/___ ___/___
36 ___/___ ___/___ ___/___ ___/___ 84 ___/___ ___/___ ___/___ ___/___ 132 ___/___ ___/___ ___/___ ___/___ 180 ___/___ ___/___ ___/___ ___/___
37 ___/___ ___/___ ___/___ ___/___ 85 ___/___ ___/___ ___/___ ___/___ 133 ___/___ ___/___ ___/___ ___/___ 181 ___/___ ___/___ ___/___ ___/___
38 ___/___ ___/___ ___/___ ___/___ 86 ___/___ ___/___ ___/___ ___/___ 134 ___/___ ___/___ ___/___ ___/___ 182 ___/___ ___/___ ___/___ ___/___
39 ___/___ ___/___ ___/___ ___/___ 87 ___/___ ___/___ ___/___ ___/___ 135 ___/___ ___/___ ___/___ ___/___ 183 ___/___ ___/___ ___/___ ___/___
40 ___/___ ___/___ ___/___ ___/___ 88 ___/___ ___/___ ___/___ ___/___ 136 ___/___ ___/___ ___/___ ___/___ 184 ___/___ ___/___ ___/___ ___/___
41 ___/___ ___/___ ___/___ ___/___ 89 ___/___ ___/___ ___/___ ___/___ 137 ___/___ ___/___ ___/___ ___/___ 185 ___/___ ___/___ ___/___ ___/___
42 ___/___ ___/___ ___/___ ___/___ 90 ___/___ ___/___ ___/___ ___/___ 138 ___/___ ___/___ ___/___ ___/___ 186 ___/___ ___/___ ___/___ ___/___
43 ___/___ ___/___ ___/___ ___/___ 91 ___/___ ___/___ ___/___ ___/___ 139 ___/___ ___/___ ___/___ ___/___ 187 ___/___ ___/___ ___/___ ___/___
44 ___/___ ___/___ ___/___ ___/___ 92 ___/___ ___/___ ___/___ ___/___ 140 ___/___ ___/___ ___/___ ___/___ 188 ___/___ ___/___ ___/___ ___/___
45 ___/___ ___/___ ___/___ ___/___ 93 ___/___ ___/___ ___/___ ___/___ 141 ___/___ ___/___ ___/___ ___/___ 189 ___/___ ___/___ ___/___ ___/___
46 ___/___ ___/___ ___/___ ___/___ 94 ___/___ ___/___ ___/___ ___/___ 142 ___/___ ___/___ ___/___ ___/___ 190 ___/___ ___/___ ___/___ ___/___
47 ___/___ ___/___ ___/___ ___/___ 95 ___/___ ___/___ ___/___ ___/___ 143 ___/___ ___/___ ___/___ ___/___ 191 ___/___ ___/___ ___/___ ___/___
48 ___/___ ___/___ ___/___ ___/___ 96 ___/___ ___/___ ___/___ ___/___ 144 ___/___ ___/___ ___/___ ___/___ 192 ___/___ ___/___ ___/___ ___/___

EVOHD Programming Guide • Zone Programming

 Worksheet 4: Zone Labels
Zone Zone Zone Zone
Zone Label Zone Label Zone Label Zone Label
# # # #
1 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 49 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 97 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 145 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
2 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 50 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 98 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 146 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
3 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 51 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 99 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 147 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
4 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 52 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 100 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 148 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
5 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 53 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 101 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 149 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
6 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 54 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 102 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 150 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
7 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 55 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 103 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 151 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
8 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 56 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 104 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 152 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
9 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 57 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 105 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 153 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
10 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 58 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 106 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 154 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
11 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 59 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 107 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 155 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__

EVOHD Programming Guide • Zone Programming

12 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 60 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 108 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 156 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
13 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 61 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 109 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 157 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
14 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 62 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 110 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 158 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
15 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 63 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 111 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 159 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
16 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 64 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 112 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 160 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
17 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 65 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 113 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 161 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
18 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 66 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 114 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 162 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
19 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 67 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 115 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 163 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
20 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 68 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 116 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 164 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
21 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 69 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 117 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 165 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
22 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 70 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 118 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 166 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
23 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 71 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 119 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 167 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
24 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 72 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 120 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 168 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
25 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 73 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 121 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 169 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
26 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 74 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 122 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 170 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
27 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 75 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 123 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 171 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
28 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 76 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 124 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 172 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
29 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 77 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 125 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 173 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
30 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 78 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 126 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 174 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
31 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 79 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 127 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 175 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
32 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 80 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 128 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 176 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
33 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 81 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 129 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 177 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
34 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 82 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 130 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 178 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
35 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 83 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 131 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 179 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
36 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 84 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 132 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 180 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
37 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 85 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 133 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 181 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
38 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 86 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 134 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 182 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
39 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 87 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 135 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 183 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
40 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 88 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 136 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 184 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
41 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 89 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 137 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 185 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
42 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 90 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 138 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 186 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
43 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 91 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 139 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 187 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
44 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 92 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 140 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 188 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
45 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 93 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 141 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 189 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
46 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 94 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 142 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 190 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
47 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 95 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 143 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ 191 __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__ __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__

Zone Labels | 17
48 96 144 192
 EVOHD • Programming Guide

Keyswitch Programming
Use the following section to program keyswitches on your EVOHD control panel. Keyswitch programming information is entered in worksheets 5 and 6 on page 19.

Keyswitch Numbering
This feature allows the installer to assign a keyswitch to an addressable or hardwired detection device. To assign keyswitch numbering, proceed as follows:
1. Enter a section number between [0501] and [0532]. These sections represent keyswitches 1 to 32, respectively.
2. In column A, of worksheet 5 on page 19, enter the eight-digit serial number of the module, to which the keyswitch is connected.
3. In column B, of worksheet 5 on page 19, enter the three-digit input number of the module, to which the keyswitch is connected.

Keyswitch Parameters
This feature defines the keyswitch’s partition assignment and arming method. To assign keyswitch parameters, proceed as follows:
1. Enter a section number between [0601] and [0632]. These sections represent keyswitches 1 to 32, respectively.
2. In column C, of worksheet 5 on page 19, enter the keyswitch definition (refer to table 8 for details). The default setting is set to disabled.
3. In column D, of worksheet 5 on page 19, enter the desired partition to which the keyswitch is assigned (refer to table 9 for details). By default, keyswitches are
not assigned to a partition.
4. In column E, of worksheet 5 on page 19, enter the keyswitch option (refer to table 10 for details). By default, all settings are set to OFF.

Table 12: Keyswitch definitions Table 13: Keyswitch partition/panic type assignment Table 14: Keyswitch options/partition assignment

Input Value Description Input Value Description Input Value Description

0 Disabled (default) • Not assigned to a partition (default) 1 Assign keyswitch to partition 1*

0
• Panic type 1: police*
1 Momentary keyswitch 2 Assign keyswitch to partition 2*
• Assign keyswitch to partition 1
2 Maintained keyswitch 1 • Disarm only
• Panic type 2: medical* 3
• Assign keyswitch to partition 3*
Generates a utility key event on • Assign keyswitch to partition 2
3 2
open* • Panic type 3: fire* • OFF: disarm; ON: disarm only if Stay/
4 Instant armed
Generates a utility key event on 3 Assign keyswitch to partition 3 • Assign keyswitch to partition 4*
4
open and close*
4 Assign keyswitch to partition 4 • Arm only
5 Panic input option** 5
• Assign keyswitch to partition 5*
5 Assign keyswitch to partition 5
* To use this keyswitch definition, one or more PGMs • Stay arming**
6 Assign keyswitch to partition 6 6
must be programmed with the Utility Key event (see • Assign keyswitch to partition 6*
Event Group 048 in table 17 on page 21). 7 Assign keyswitch to partition 7 • Force arming**
** To use this keyswitch definition, refer to Panic Input 7
8 Assign keyswitch to partition 8 • Assign keyswitch to partition 7*
Option.
• Instant arming**
8
* Only applicable for keyswitch definition 5 (panic input option • Assign keyswitch to partition 8*
in table 12). Refer to Panic Input Option for details.
* Only applicable for keyswitch definition 5 (panic input option
in table 8). Refer to Panic Input Option for details.
** Select only one of these arming types. If all are OFF,
keyswitch will use regular arming by default.

Keyswitch Arming/Disarming Report Codes

For Ademco Slow, Silent Knight Fast, Sescoa, Ademco Express, or pager formats, key-in desired two-digit hex values from 00 to FF. Use worksheet 6 on
page 19 to record settings.

Ademco Contact ID
• Use section [4033] to program a set of default Ademco report codes, using table 49 (List of automatic report codes), on page 57.
• To program the remaining report codes or change certain defaults, access the individual sections and key-in the desired two-digit hex value, found in table 50
(List of Ademco contact ID report codes), on page 60.

SIA Format
• Use section [4033] to program a set of SIA report codes, using table 49 (List of automatic report codes), on page 57.
• Codes that have not been set to default can be set as such manually, by entering FF in the appropriate section.
• To disable the reporting of an event, enter 00 in the appropriate section.

Panic Input Option

To use the panic input option when programming keyswitch parameters in sections [0601] to [0632], proceed as follows:
1. Enable partition panic alarm options, by referring to table 39 on page 51.
2. Enter 5 to access the panic input option (see table 8).
3. Enter 0, 1, or 2 to assign the type of panic. As shown in table 9, 0 = police; 1= medical; 2 = fire.
4. Enter 1 to 8 to assign the keyswitch to partitions 1 through 8, respectively (see table 10).

18 | Keyswitch Programming Version 1.0

 Worksheet 5: Keyswitch Numbering and Parameters
A B C D E
Keyswitch # Description Module Section Eight-digit Serial Number Input Number Section Keyswitch Definition Keyswitch Partition Keyswitch Options
1 ______________________ ______________________ [0501] ___/___/___/___/___/___/___/___ ___/___/___ [0601] _____ _____ 1 2 3 4 5 6 7 8
2 ______________________ ______________________ [0502] ___/___/___/___/___/___/___/___ ___/___/___ [0602] _____ _____ 1 2 3 4 5 6 7 8
3 ______________________ ______________________ [0503] ___/___/___/___/___/___/___/___ ___/___/___ [0603] _____ _____ 1 2 3 4 5 6 7 8
4 ______________________ ______________________ [0504] ___/___/___/___/___/___/___/___ ___/___/___ [0604] _____ _____ 1 2 3 4 5 6 7 8
5 ______________________ ______________________ [0505] ___/___/___/___/___/___/___/___ ___/___/___ [0605] _____ _____ 1 2 3 4 5 6 7 8
6 ______________________ ______________________ [0506] ___/___/___/___/___/___/___/___ ___/___/___ [0606] _____ _____ 1 2 3 4 5 6 7 8
7 ______________________ ______________________ [0507] ___/___/___/___/___/___/___/___ ___/___/___ [0607] _____ _____ 1 2 3 4 5 6 7 8
8 ______________________ ______________________ [0508] ___/___/___/___/___/___/___/___ ___/___/___ [0608] _____ _____ 1 2 3 4 5 6 7 8
9 ______________________ ______________________ [0509] ___/___/___/___/___/___/___/___ ___/___/___ [0609] _____ _____ 1 2 3 4 5 6 7 8
10 ______________________ ______________________ [0510] ___/___/___/___/___/___/___/___ ___/___/___ [0610] _____ _____ 1 2 3 4 5 6 7 8
11 ______________________ ______________________ [0511] ___/___/___/___/___/___/___/___ ___/___/___ [0611] _____ _____ 1 2 3 4 5 6 7 8
12 ______________________ ______________________ [0512] ___/___/___/___/___/___/___/___ ___/___/___ [0612] _____ _____ 1 2 3 4 5 6 7 8

EVOHD Programming Guide • Keyswitch Programming

13 ______________________ ______________________ [0513] ___/___/___/___/___/___/___/___ ___/___/___ [0613] _____ _____ 1 2 3 4 5 6 7 8
14 ______________________ ______________________ [0514] ___/___/___/___/___/___/___/___ ___/___/___ [0614] _____ _____ 1 2 3 4 5 6 7 8
15 ______________________ ______________________ [0515] ___/___/___/___/___/___/___/___ ___/___/___ [0615] _____ _____ 1 2 3 4 5 6 7 8
16 ______________________ ______________________ [0516] ___/___/___/___/___/___/___/___ ___/___/___ [0616] _____ _____ 1 2 3 4 5 6 7 8
17 ______________________ ______________________ [0517] ___/___/___/___/___/___/___/___ ___/___/___ [0617] _____ _____ 1 2 3 4 5 6 7 8
18 ______________________ ______________________ [0518] ___/___/___/___/___/___/___/___ ___/___/___ [0618] _____ _____ 1 2 3 4 5 6 7 8
19 ______________________ ______________________ [0519] ___/___/___/___/___/___/___/___ ___/___/___ [0619] _____ _____ 1 2 3 4 5 6 7 8
20 ______________________ ______________________ [0520] ___/___/___/___/___/___/___/___ ___/___/___ [0620] _____ _____ 1 2 3 4 5 6 7 8
21 ______________________ ______________________ [0521] ___/___/___/___/___/___/___/___ ___/___/___ [0621] _____ _____ 1 2 3 4 5 6 7 8
22 ______________________ ______________________ [0522] ___/___/___/___/___/___/___/___ ___/___/___ [0622] _____ _____ 1 2 3 4 5 6 7 8
23 ______________________ ______________________ [0523] ___/___/___/___/___/___/___/___ ___/___/___ [0623] _____ _____ 1 2 3 4 5 6 7 8
24 ______________________ ______________________ [0524] ___/___/___/___/___/___/___/___ ___/___/___ [0624] _____ _____ 1 2 3 4 5 6 7 8
25 ______________________ ______________________ [0525] ___/___/___/___/___/___/___/___ ___/___/___ [0625] _____ _____ 1 2 3 4 5 6 7 8
26 ______________________ ______________________ [0526] ___/___/___/___/___/___/___/___ ___/___/___ [0626] _____ _____ 1 2 3 4 5 6 7 8
27 ______________________ ______________________ [0527] ___/___/___/___/___/___/___/___ ___/___/___ [0627] _____ _____ 1 2 3 4 5 6 7 8
28 ______________________ ______________________ [0528] ___/___/___/___/___/___/___/___ ___/___/___ [0628] _____ _____ 1 2 3 4 5 6 7 8
29 ______________________ ______________________ [0529] ___/___/___/___/___/___/___/___ ___/___/___ [0629] _____ _____ 1 2 3 4 5 6 7 8
30 ______________________ ______________________ [0530] ___/___/___/___/___/___/___/___ ___/___/___ [0630] _____ _____ 1 2 3 4 5 6 7 8
31 ______________________ ______________________ [0531] ___/___/___/___/___/___/___/___ ___/___/___ [0631] _____ _____ 1 2 3 4 5 6 7 8
32 ______________________ ______________________ [0532] ___/___/___/___/___/___/___/___ ___/___/___ [0632] _____ _____ 1 2 3 4 5 6 7 8
Worksheet 6: Arming and Disarming with Keyswitch Report Codes
Section Keyswitch # Arming Section Keyswitch # Arming Section Keyswitch # Arming Section Keyswitch # Disarming Section Keyswitch # Disarming Section Keyswitch # Disarming
[0701] 1 ___/___ [0715] 15 ___/___ [0729] 29 ___/___ [0801] 1 ___/___ [0815] 15 ___/___ [0829] 29 ___/___
[0702] 2 ___/___ [0716] 16 ___/___ [0730] 30 ___/___ [0802] 2 ___/___ [0816] 16 ___/___ [0830] 30 ___/___
[0703] 3 ___/___ [0717] 17 ___/___ [0731] 31 ___/___ [0803] 3 ___/___ [0817] 17 ___/___ [0831] 31 ___/___
[0704] 4 ___/___ [0718] 18 ___/___ [0732] 32 ___/___ [0804] 4 ___/___ [0818] 18 ___/___ [0832] 32 ___/___
[0705] 5 ___/___ [0719] 19 ___/___ [0805] 5 ___/___ [0819] 19 ___/___
[0706] 6 ___/___ [0720] 20 ___/___ [0806] 6 ___/___ [0820] 20 ___/___
[0707] 7 ___/___ [0721] 21 ___/___ [0807] 7 ___/___ [0821] 21 ___/___
[0708] 8 ___/___ [0722] 22 ___/___ [0808] 8 ___/___ [0822] 22 ___/___
[0709] 9 ___/___ [0723] 23 ___/___ [0809] 9 ___/___ [0823] 23 ___/___
[0710] 10 ___/___ [0724] 24 ___/___ [0810] 10 ___/___ [0824] 24 ___/___
[0711] 11 ___/___ [0725] 25 ___/___ [0811] 11 ___/___ [0825] 25 ___/___
[0712] 12 ___/___ [0726] 26 ___/___ [0812] 12 ___/___ [0826] 26 ___/___
[0713] 13 ___/___ [0727] 27 ___/___ [0813] 13 ___/___ [0827] 27 ___/___
[0714] 14 ___/___ [0728] 28 ___/___ [0814] 14 ___/___ [0828] 28 ___/___

Keyswitch Numbering and Parameters | 19

 EVOHD • Programming Guide

Programmable Outputs
Use the following section to program various programmable outputs (PGMs) on your EVOHD control panel.
PGM Test Mode
Table 15: Test PGMs and their section numbers

Section Action Description

[0901] Test PGM 1 Activates PGM 1 for eight seconds to verify if the PGM is functioning properly
[0902] Test PGM 2 Activates PGM 2 for eight seconds to verify if the PGM is functioning properly
[0903] Test PGM 3 Activates PGM 3 for eight seconds to verify if the PGM is functioning properly
[0904] Test PGM 4 Activates PGM 4 for eight seconds to verify if the PGM is functioning properly
[0905] Test PGM 5 Activates PGM 5 for eight seconds to verify if the PGM is functioning properly

PGM Delays
To record values in worksheet 7, use the PGM Delay descriptions, as well as the information appearing in table 16 (Description of PGM options).
WARNING: Considering that section numbers follow a numerical sequence, PGM activation and deactivation events for a respective PGM are skipped
when using the keypad’s programming sequence. For instance, sections [0918] and [0919] correspond to PGM 1 and one follows the other in the
programming sequence; however, the following section in the sequence ([0920], corresponds to PGM 2. Make sure to enter sections [0910] through
[0917] (see table 17) to complete activation/deactivation programming for PGM 1.
Worksheet 7: PGM Delays
Section PGM Delay Value Range Description Default Setting
[0918] ___/___/___ (001 to 255 x 1 sec./min.) PGM 1 delay (refer to section [0919], option 2, to see whether the delay is in sec. or min.) 5 sec./min.
[0928] ___/___/___ (001 to 255 x 1 sec./min.) PGM 2 delay (refer to section [0929], option 2, to see whether the delay is in sec. or min.) 5 sec./min.
[0938] ___/___/___ (001 to 255 x 1 sec./min.) PGM 3 delay (refer to section [0939], option 2, to see whether the delay is in sec. or min.) 5 sec./min.
[0948] ___/___/___ (001 to 255 x 1 sec./min.) PGM 4 delay (refer to section [0949], option 2, to see whether the delay is in sec. or min.) 5 sec./min.
[0958] ___/___/___ (001 to 255 x 1 sec./min.) PGM 5 delay (refer to section [0959], option 2, to see whether the delay is in sec. or min.) 5 sec./min.

PGM Options
Table 16: Description of PGM options

PGM 1 [0919] PGM 2[0929] PGM 3 [0939] PGM 4 [0949] PGM 5 [0959]
Option Description
OFF ON OFF ON OFF ON OFF ON OFF ON
PGM deactivation after (OFF = deactivation event;
1          
ON = PGM timer)
2 PGM base time (OFF = seconds; ON = minutes)          

Flexible PGM deactivation option (OFF = PGM timer

3          
only; ON = PGM timer and/or deactivation event)
PGM initial state (OFF = normally open;
4          
ON = normally closed)
5 to 8 Future use - - - - - - - - - -

OFF = Disabled; ON = Enabled; = Default Setting

WARNING: To use the flexible PGM Deactivation option (option 3), the PGM deactivation after option (option 1) must be ON (see table 16).

PGM Programming
Use table 17 (List of event and feature groups), on page 21 to enter data in worksheet 8. Columns A through D in worksheet 8, correspond to their respective
columns in table 17.

Worksheet 8: PGM Programming

A B C D
Section PGM Event Group Section PGM Feature Group Section PGM Start # Section PGM End #
[0910] PGM 1 ___/___/___ [0911] PGM 1 ___/___/___ [0912] PGM 1 ___/___/___ [0913] PGM 1 ___/___/___
[0920] PGM 2 ___/___/___ [0921] PGM 2 ___/___/___ [0922] PGM 2 ___/___/___ [0923] PGM 2 ___/___/___
PGM Activation [0930] PGM 3 ___/___/___ [0931] PGM 3 ___/___/___ [0932] PGM 3 ___/___/___ [0933] PGM 3 ___/___/___
[0940] PGM 4 ___/___/___ [0941] PGM 4 ___/___/___ [0942] PGM 4 ___/___/___ [0943] PGM 4 ___/___/___
[0950] PGM 5 ___/___/___ [0951] PGM 5 ___/___/___ [0952] PGM 5 ___/___/___ [0953] PGM 5 ___/___/___
[0914] PGM 1 ___/___/___ [0915] PGM 1 ___/___/___ [0916] PGM 1 ___/___/___ [0917] PGM 1 ___/___/___
[0924] PGM 2 ___/___/___ [0925] PGM 2 ___/___/___ [0926] PGM 2 ___/___/___ [0927] PGM 2 ___/___/___
PGM Deactivation [0934] PGM 3 ___/___/___ [0935] PGM 3 ___/___/___ [0936] PGM 3 ___/___/___ [0937] PGM 3 ___/___/___
[0944] PGM 4 ___/___/___ [0945] PGM 4 ___/___/___ [0946] PGM 4 ___/___/___ [0947] PGM 4 ___/___/___
[0954] PGM 5 ___/___/___ [0955] PGM 5 ___/___/___ [0956] PGM 5 ___/___/___ [0957] PGM 5 ___/___/___

20 | Programmable Outputs Version 1.0

EVOHD • Programming Guide

Event and Feature Groups

Notes for Table 17

000 = Occurs in all partitions enabled in the system (see section 001 = Partition 1 002 = Partition 2 003 = Partition 3 004 = Partition 4
[3031], in table 21 on page 39)
255 = Occurs in at least one partition enabled in the system 005 = Partition 5 006 = Partition 6 007 = Partition 7 008 = Partition 8

Table 17: List of event and feature groups

A B C D
Event Feature
Event Group Feature Group Start # End #

000 Zone is OK 001 to 192 001 to 192

001 Zone is open 000 001 to 192 001 to 192
Zone numbers
002 Zone is tampered 255 = any zone # 001 to 192 001 to 192
003 Zone is in fire loop trouble 001 to 192 001 to 192
004 Non-reportable event 000 TLM trouble 000 000
Smoke detector reset 001 001
Arm with no entry delay 002 002
Arm in Stay mode 003 003
Arm in Away mode 004 004
Full arm when in Stay mode 005 005
Voice module access 006 006
Remote control access 007 007
PC fail to communicate 008 008
Midnight 009 009
Neware user login 010 010
Neware user logout 011 011
User initiated call-up 012 012
000
Force answer 013 013
Force hangup 014 014
004 Non-reportable event
Future use 015 015
Auxiliary output manually activated 016 016
Auxiliary output manually deactivated 017 017
Voice reporting failed 018 018
FTC restore 019 019
Software access (VDMP3, IP150, NEware, BabyWare) 020 020
IPR512 1 Registration Status 021 021
IPR512 2 registration status 022 022
IPR512 3 registration status 023 023
IPR512 4 registration status 024 024
Armed with trouble(s) 034 034
Installer access authorization started 035 035
Installer access authorization ended 036 036
255 Any non-reportable event Not Used Not Used
000 User codes 000 to 255 000 to 255 000 to 255
001 User codes 256 to 511 000 to 255 000 to 255
005 User code entered on keypad 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Door numbers 001 to 032 001 to 032
006 User/card access on door
255 Any door number Not Used Not Used

Version 1.0 Programmable Outputs | 21

 EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

000 One-touch bypass programming 000 000

000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
007 Bypass programming access
002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Zone numbers 001 to 192 001 to 192
008 TX delay zone alarm
255 Any zone number Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
009 Arming with master 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
010 Arming with user code 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Keyswitch numbers 001 to 032 001 to 032
011 Arming with keyswitch
255 Any keyswitch Not Used Not Used
Auto arming 000 000
Arming with BabyWare 001 001
Late to close 002 002
No movement arming 003 003
Partial arming 004 004
000
012 Special arming One-touch arming 005 005
Future use 006 006
Future use 007 007
(InTouch) voice module arming 008 008
Delinquency closing 009 009
255 Any special arming event Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
013 Disarm with master 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
014 Disarm with user code 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Keyswitch numbers 001 to 032 001 to 032
015 Disarm with keyswitch
255 Any keyswitch Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
016 Disarm after alarm with master 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used

22 | Programmable Outputs Version 1.0

EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

000 User codes 001 to 255 001 to 255 001 to 255

001 User codes 256 to 511 000 to 255 000 to 255
017 Disarm after alarm with user code 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Keyswitch numbers 001 to 032 001 to 032
018 Disarm after alarm with keyswitch
255 Any keyswitch Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
019 Alarm cancelled with master 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
020 Alarm cancelled with user code 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Keyswitch numbers 001 to 032 001 to 032
021 Alarm cancelled with keyswitch
255 Any keyswitch Not Used Not Used
Auto arm cancelled 000 000
One-touch Stay/Instant disarm 001 001
Disarming with BabyWare 002 002
Disarming with BabyWare after alarm 003 003
000 BabyWare cancelled alarm 004 004
022 Special disarming
Future use 005 005
Future use 006 006
Future use 007 007
(InTouch) voice module disarming 008 008
255 Any special disarming event Not Used Not Used
023 Zone bypassed 001 to 192 001 to 192
024 Zone in alarm 001 to 192 001 to 192
000
025 Fire alarm Zone numbers 001 to 192 001 to 192
255 = any zone #
026 Zone alarm restore 001 to 192 001 to 192
027 Fire alarm restore 001 to 192 001 to 192
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
028 Early to disarm by user 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used

Version 1.0 Programmable Outputs | 23

 EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

000 User codes 001 to 255 001 to 255 001 to 255

001 User codes 256 to 511 000 to 255 000 to 255
029 Late to disarm by user 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
Emergency panic (Keys 1 & 3) 000 000
Medical panic (Keys 4 & 6) 001 001
Fire panic (Keys 7 & 9) 002 002
Recent closing 003 003
Police code 004 004
Zone shutdown 005 005
000
Future use 006 006
Future use 007 007
030 Special alarm TLM alarm 008 008
Central communication failure alarm 009 009
Module tamper alarm 010 010
Missing GSM module alarm 011 011
GSM no service alarm 012 012

000 Missing IP module alarm 013 013

(cont.) IP no service alarm 014 014
Missing voice module alarm 015 015
255 Any special alarm event Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
031 Duress alarm by user 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
032 Zone shutdown 001 to 192 001 to 192
000
033 Zone tamper Zone numbers 001 to 192 001 to 192
255 = any zone #
034 Zone tamper restore 001 to 192 001 to 192
Keypad lockout 000 000
035 Special tamper 000
Voice lockout 001 001
Future use 000 000
AC failure 001 001
Battery failure 002 002
Auxiliary current limit 003 003
000 Bell current limit 004 004
036 Trouble event
Bell absent 005 005
Clock trouble 006 006
Global fire loop 007 007
Panel tamper 008 008
255 Any trouble event Not Used Not Used

24 | Programmable Outputs Version 1.0

EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

TLM trouble 000 000

AC failure 001 001
Battery failure 002 002
Auxiliary current limit 003 003
000 Bell current limit 004 004
037 Trouble restore
Bell absent 005 005
Clock trouble 006 006
Global fire loop 007 007
Panel tamper 008 008
255 Any trouble restore event Not Used Not Used
Combus fault 000 000
Module tamper 001 001
ROM/RAM error 002 002
TLM trouble 003 003
Fail to communicate 004 004
Printer fault 005 005
AC failure 006 006
Battery failure 007 007
Auxiliary failure 008 008
000
IP Receiver supervision 009 009
IP Receiver Fail to communicate 010 010
IP Receiver Unregistered 011 011
Direct light 012 012
RF Interference 013 013
Low bus voltage 014 014
Self-test failure 015 015
LAN Failure 016 016
038 Module trouble
WAN Failure 017 017
Missing PCS module 000 000
PCS Tamper 001 001
GSM RF jam 002 002
GSM no service 003 003
001 Fail to communicate IPR512 1 004 004
Fail to communicate IPR512 2 005 005
Fail to communicate IPR512 3 006 006
Fail to communicate IPR512 4 007 007
Missing voice module 032 032
Missing IP module 000 000
IP no service 001 001
Fail to communicate IPR512 1 002 002
002
Fail to communicate IPR512 2 003 003
Fail to communicate IPR512 3 004 004
Fail to communicate IPR512 4 005 005
255 Any module trouble event Not Used Not Used

Version 1.0 Programmable Outputs | 25

 EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

Combus fault 000 000

Module tamper 001 001
ROM/RAM error 002 002
TLM trouble 003 003
Fail to communicate 004 004
Printer fault 005 005
AC failure 006 006
Battery failure 007 007
Auxiliary failure 008 008
000
IP Receiver supervision 009 009
IP Receiver Fail to communicate 010 010
IP Receiver Unregistered 011 011
Direct light 012 012
RF Interference 013 013
Low bus voltage 014 014
Self-test failure 015 015
LAN Failure 016 016
039 Module trouble restore
WAN Failure 017 017
Missing PCS module 000 000
PCS Tamper 001 001
GSM RF jam supervision 002 002
GSM no service 003 003
001 Fail to communicate IPR512 1 004 004
Fail to communicate IPR512 2 005 005
Fail to communicate IPR512 3 006 006
Fail to communicate IPR512 4 007 007
Missing voice module 032 032
Missing IP module 000 000
IP no service 001 001
Fail to communicate IPR512 1 002 002
002
Fail to communicate IPR512 2 003 003
Fail to communicate IPR512 3 004 004
Fail to communicate IPR512 4 005 005
255 Any module trouble restore event Not Used Not Used

Fail to communicate on telephone 000 Telephone number 001 to 004 001 to 004
040
number 255 Any telephone number Not Used Not Used
041 Low battery on zone 001 to 192 001 to 192
042 Zone supervision trouble 000 001 to 192 001 to 192
Zone numbers
043 Low battery on zone restored 255 = any zone # 001 to 192 001 to 192
044 Zone supervision trouble restored 001 to 192 001 to 192

26 | Programmable Outputs Version 1.0

EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

Power-up after total power down 000 000

Software reset (watchdog) 001 001
Test report 002 002
Listen-in request 003 003
000 BabyWare In (connected) 004 004
045 Special events
BabyWare Out (disconnected) 005 005
Installer In programming 006 006
Installer Out of programming 007 007
Failed to arm 008 008
255 Any special event Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
046 Early to arm by user 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
047 Late to arm by user 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Utility key 001 to 064*† 001 to 064 001 to 064
048 Utility key
255 Any utility key*† Not Used Not Used
049 Request for exit 001 to 032 001 to 032
050 Access denied 001 to 032 001 to 032
051 Door left open alarm 000 001 to 032 001 to 032
255 = any door Door numbers
052 Door forced alarm number 001 to 032 001 to 032
053 Door left open restore 001 to 032 001 to 032
054 Door forced open restore 001 to 032 001 to 032
000 Zone numbers 001 to 192 001 to 192
055 Intellizone triggered
255 Any zone number Not Used Not Used
056 Zone excluded on Force arming 000 Zone numbers 001 to 192 001 to 192
057 Zone went back to arm status 255 = any zone Zone numbers 001 to 192 001 to 192
058 New module assigned on combus Module address 001 to 254 001 to 254
000
Module manually removed from 255 = any module Module address
059 001 to 254 001 to 254
combus
060 Non-saved event 000 Remote control rejected 000 000
061 Future use Future use Future use Future Use Future Use
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
062 Access granted to user 002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used
000 Unregistered access code 000 000
000 User codes 001 to 255 001 to 255 001 to 255
001 User codes 256 to 511 000 to 255 000 to 255
063 Access denied to user
002 User codes 512 to 767 000 to 255 000 to 255
003 User codes 768 to 999 000 to 231 000 to 231
255 Any user code Not Used Not Used

Version 1.0 Programmable Outputs | 27

 EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

Armed 000 000

Force armed 001 001
Stay armed 002 002

See Notes for Table Instant armed 003 003

064 Status 1
17 on page 21 Strobe alarm 004 004
Silent alarm 005 005
Audible alarm 006 006
Fire alarm 007 007
Ready 000 000
Exit delay 001 001
Entry delay 002 002

See Notes for Table System in trouble 003 003

065 Status 2
17 on page 21 Alarm in memory 004 004
Zones bypassed 005 005
Bypass, master, installer programming 006 006
Keypad lockout 007 007
Intellizone delay engaged** 000 000
Fire delay engaged 001 001
Auto arm 002 002

See Notes for Table Arming with voice module (set until exit delay finishes) 003 003
066 Status 3
17 on page 21 Tamper 004 004
Zone low battery 005 005
Fire loop trouble 006 006
Zone supervision trouble 007 007
Chime in partition 1 to 4
000 to 003 000 to 003
(000 to 003 = system 1 to 4)
Smoke detector power reset 004 004
Ground start 005 005
Kiss off 006 006
Telephone ring 007 007
Bell on partition 1 to 8
008 to 015 008 to 015
(008 to 015 = partitions 1 to 8)
Pulsed alarm in partition 1 to 8
016 to 023 016 to 023
(016 to 023 = partitions 1 to 8)
Open/close Kiss off in partition 1 to 8
024 to 031 024 to 031
(024 to 031 = partitions 1 to 8)
067** Special status - Keyswitch/PGM inputs # 01 to 32
032 to 063 032 to 063
(032 to 063 = Keyswitch/PGM inputs # 01 to 32)
Status of access door 01 to 32
064 to 095 064 to 095
(064 to 095 = access doors 01 to 32)
Trouble in system 096 096
Trouble in dialer 097 097
Trouble in module 098 098
Trouble in combus 099 099
Future use 100 to 102 100 to 102
Time and date trouble 103 103
AC failure 104 104
Battery failure 105 105

28 | Programmable Outputs Version 1.0

EVOHD • Programming Guide

Table 17: List of event and feature groups (Continued)

A B C D
Event Feature
Event Group Feature Group Start # End #

Auxiliary current limit 106 106

Bell current limit 107 107
Bell absent 108 108
ROM error 109 109
RAM error 110 110
Future use 111 111
TLM 1 trouble 112 112
Fail to communicate 1 113 113
Fail to communicate 2 114 114
Fail to communicate 3 115 115
Fail to communicate 4 116 116
Fail to communicate with PC 117 117
Future use 118 118
Future use 119 119
067** Special status
- Module tamper trouble 120 120
(cont.) (cont.)
Module ROM error 121 121
Module TLM error 122 122
Module Failure to communicate 123 123
Module printer trouble 124 124
Module AC failure 125 125
Module battery trouble 126 126
Module auxiliary failure 127 127
Missing keypad 128 128
Missing module 129 129
Future use 130 to 132 130 to 132
Global combus failure 133 133
Combus overload 134 134
Future use 135 135
Dialer relay 136 136
070 Clock - - Hour Minutes

* If a keyswitch input is used, the input must be defined as Generates a Utility Key Event on Open or Generates a Utility Key Event on Open and Close. If a remote control is used, the remote
control button must be defined as a utility key button.
** These events or event groups cannot be used for a module’s PGM programming.
† Actions that activate a utility key event.

Version 1.0 Programmable Outputs | 29

 EVOHD • Programming Guide

Utility Keys
Table 18: Description of utility keys

Keyswitch Inputs Keyswitch Inputs

Utility Key Event Keypad Utility Keys Remote Control
(definition = [3]) (definition = [4])
1 1&2 Keyswitch input 1 opens Keyswitch input 1 opens Utility key 1 remote control button
2 4&5 Keyswitch input 2 opens Keyswitch input 1 closes Utility key 2 remote control button
3 7&8 Keyswitch input 3 opens Keyswitch input 2 opens Utility key 3 remote control button
4 CLEAR & 0 or * & 0 Keyswitch input 4 opens Keyswitch input 2 closes Utility key 4 remote control button
5 2&3 Keyswitch input 5 opens Keyswitch input 3 opens Utility key 5 remote control button
6 5&6 Keyswitch input 6 opens Keyswitch input 3 closes -
7 8&9 Keyswitch input 7 opens Keyswitch input 4 opens -
8 0 & ENTER or 0 & # Keyswitch input 8 opens Keyswitch input 4 closes -
9 - Keyswitch input 9 opens Keyswitch input 5 opens -
10 - Keyswitch input 10 opens Keyswitch input 5 closes -
11 - Keyswitch input 11 opens Keyswitch input 6 opens -
12 - Keyswitch input 12 opens Keyswitch input 6 closes -
13 - Keyswitch input 13 opens Keyswitch input 7 opens -
14 - Keyswitch input 14 opens Keyswitch input 7 closes -
15 - Keyswitch input 15 opens Keyswitch input 8 opens -
16 - Keyswitch input 16 opens Keyswitch input 8 closes -
17 - Keyswitch input 17 opens Keyswitch input 9 opens -
18 - Keyswitch input 18 opens Keyswitch input 9 closes -
 -   -
31 - Keyswitch input 31 opens Keyswitch input 16 opens -
32 - Keyswitch input 32 opens Keyswitch input 16 closes -
33 - - Keyswitch input 17 opens -
34 - - Keyswitch input 17 closes -
 - -  -
63 - - Keyswitch input 32 opens -
64 - - Keyswitch input 32 closes -

NOTE: Refer to the RTX3 Reference and Installation Manual for instructions on how to program remote control buttons.

Input Speeds
Worksheet 9: Input Speeds
Data: Decimal Value (001 to Description Data: Decimal Value (001 to Description
Section Section
255 x 30 msec.) (Default Setting: 600 msec.) 255 x 30 msec.) (Default Setting: 600 msec.)
[0961] ___/___/___ Input speed of input 01 [0969] ___/___/___ Input speed of input 09 (ATZ of input 01)
[0962] ___/___/___ Input speed of input 02 [0970] ___/___/___ Input speed of input 10 (ATZ of input 02)
[0963] ___/___/___ Input speed of input 03 [0971] ___/___/___ Input speed of input 11 (ATZ of input 03)
[0964] ___/___/___ Input speed of input 04 [0972] ___/___/___ Input speed of input 12 (ATZ of input 04)
[0965] ___/___/___ Input speed of input 05 [0973] ___/___/___ Input speed of input 13 (ATZ of input 05)
[0966] ___/___/___ Input speed of input 06 [0974] ___/___/___ Input speed of input 14 (ATZ of input 06)
[0967] ___/___/___ Input speed of input 07 [0975] ___/___/___ Input speed of input 15 (ATZ of input 07)
[0968] ___/___/___ Input speed of input 08 [0976] ___/___/___ Input speed of input 16 (ATZ of input 08)

Installer Code Programming

Worksheet 10: Installer Code Programming
Description
Section Data
(Default Setting: 000000)
[1000] ___/___/___/___/___/___ Installer code (refer to section [3001], in worksheet 20 on page 39)

30 | Programmable Outputs Version 1.0

EVOHD • Programming Guide

User Code Options

Use the following section to program access codes when using the K641/K641+/K641R/K641LX or K656 keypads. With this section you can program user
codes options, partition assignment, and access control features for users 001 to 999. Always refer to the keypad’s respective user manual for additional,
pertinent information on how to program users, as well as user labels. Complete user manuals are available on our Web site at paradox.com.
To program user code options:
1. Press and hold 0.
2. Enter the installer code.
3. Enter the section you wish to program. Sections [1001] to [1999] represent user numbers 001 to 999.
4. In User Code Options, set the desired options, by referring to table 15. Press ENTER or  to save your settings and advance to the next section.
5. In User Area Assignment, set the desired options, by referring to table 16. Press ENTER or  to save your settings and advance to the next section.
6. In Access Level and Schedule Assignment, enter the desired settings, by referring to figure 1.
7. In Access Control User Options, set the desired options, by referring to table 17. Press ENTER or  to save your settings and advance to the next section.
8. In Access Card, enter the access card’s serial number manually, or present the card to the reader which is connected to the keypad.
9. In Remote Control Assignment, enter the remote’s serial number manually, or press a remote button twice. Remotes can also be assigned using a
master code.

Table 15: User options for EVOHD Table 16: User area assignment for EVOHD Table 17: Access control user options for EVOHD

Input Value Description Input Value Description Input Value Description

1 2 (Master Feature) 1 User has access to area 1 1 Access control
OFF ON Disabled 2 User has access to area 2 2 Disarm on access granted
Master: user can only program 3 User has access to area 3 3 Extended unlock delay on access
ON OFF
user access codes
4 User has access to area 4 Add tolerance window to
6
Full Master: user can program schedule
5 User has access to area 5
ON ON user access codes, options, and
6 User has access to area 6
7 Access code follows schedule
assignments
OFF: unlock and disarm area(s) on
Input Value Description 7 User has access to area 7
access granted
8 User has access to area 8 8
3 Duress ON: code must be entered at
The default setting depends on the security keypad, to disarm
4 Bypass programming user’s assigned partitions. For
example, when a Master user – who is already Input Value Description
5 Arm only
assigned to partitions 1 and 2 – programs a user (Arming upon access granted)
code, partitions 1 and 2 will be the default 4 5
6 Stay & Instant
setting for the new user. OFF OFF Disabled
7 Force
ON OFF Regular arm
OFF: access keypad’s
Figure 1: Description of the Access Level and
partition only Schedule Assignment setting. OFF ON Stay arm
8
ON: access any partition ON ON Force arm
assigned to user
(00) (00)

Access Level Schedule Assignment

Enter setting from 00 Enter setting from 00
(default) to 15. Default (default) to 15. Default
setting grants access to setting grants access at all
all doors. times.

Version 1.0 User Code Options | 31

 EVOHD • Programming Guide

Arming and Disarming Report Codes

Use the following section to program arming and disarming report codes on your EVOHD control panel. Use worksheet 11 to record your settings.
For Ademco Slow, Silent Knight Fast, Sescoa, Ademco Express, or pager formats, key-in desired two-digit hex values from 00 to FF.

Ademco Format
• Use section [4033] to program a set of default Ademco report codes, using table 49 (List of automatic report codes), on page 57.
• To program the remaining report codes or change certain defaults, access the individual sections and key-in the desired two-digit hex value, found in table 50
(List of Ademco contact ID report codes), on page 60.

SIA Format
• Use section [4033] to program a set of SIA report codes, using table 49 (List of automatic report codes), on page 57.
• Codes that have not been set to default can be set as such manually, by entering FF in the appropriate section.
• To disable the reporting of an event, enter 00 in the appropriate section.

Worksheet 11: Arming and Disarming Report Codes

Access Access Access Access Access Access
Section Arming Section Arming Section Arming Section Disarming Section Disarming Section Disarming
Code Code Code Code Code Code
[2001] 1 ___/___ [2048] 48 ___/___ [2095] 95 ___/___ [2101] 1 ___/___ [2148] 48 ___/___ [2195] 95 ___/___
[2002] 2 ___/___ [2049] 49 ___/___ [2096] 96 ___/___ [2102] 2 ___/___ [2149] 49 ___/___ [2196] 96 ___/___
[2003] 3 ___/___ [2050] 50 ___/___ [2097] 97 ___/___ [2103] 3 ___/___ [2150] 50 ___/___ [2197] 97 ___/___
[2004] 4 ___/___ [2051] 51 ___/___ [2098] 98 ___/___ [2104] 4 ___/___ [2151] 51 ___/___ [2198] 98 ___/___
[2005] 5 ___/___ [2052] 52 ___/___ [2099] 99-999 ___/___ [2105] 5 ___/___ [2152] 52 ___/___ [2199] 99-999 ___/___
[2006] 6 ___/___ [2053] 53 ___/___ [2106] 6 ___/___ [2153] 53 ___/___
[2007] 7 ___/___ [2054] 54 ___/___ [2107] 7 ___/___ [2154] 54 ___/___
[2008] 8 ___/___ [2055] 55 ___/___ [2108] 8 ___/___ [2155] 55 ___/___
[2009] 9 ___/___ [2056] 56 ___/___ [2109] 9 ___/___ [2156] 56 ___/___
[2010] 10 ___/___ [2057] 57 ___/___ [2110] 10 ___/___ [2157] 57 ___/___
[2011] 11 ___/___ [2058] 58 ___/___ [2111] 11 ___/___ [2158] 58 ___/___
[2012] 12 ___/___ [2059] 59 ___/___ [2112] 12 ___/___ [2159] 59 ___/___
[2013] 13 ___/___ [2060] 60 ___/___ [2113] 13 ___/___ [2160] 60 ___/___
[2014] 14 ___/___ [2061] 61 ___/___ [2114] 14 ___/___ [2161] 61 ___/___
[2015] 15 ___/___ [2062] 62 ___/___ [2115] 15 ___/___ [2162] 62 ___/___
[2016] 16 ___/___ [2063] 63 ___/___ [2116] 16 ___/___ [2163] 63 ___/___
[2017] 17 ___/___ [2064] 64 ___/___ [2117] 17 ___/___ [2164] 64 ___/___
[2018] 18 ___/___ [2065] 65 ___/___ [2118] 18 ___/___ [2165] 65 ___/___
[2019] 19 ___/___ [2066] 66 ___/___ [2119] 19 ___/___ [2166] 66 ___/___
[2020] 20 ___/___ [2067] 67 ___/___ [2120] 20 ___/___ [2167] 67 ___/___
[2021] 21 ___/___ [2068] 68 ___/___ [2121] 21 ___/___ [2168] 68 ___/___
[2022] 22 ___/___ [2069] 69 ___/___ [2122] 22 ___/___ [2169] 69 ___/___
[2023] 23 ___/___ [2070] 70 ___/___ [2123] 23 ___/___ [2170] 70 ___/___
[2024] 24 ___/___ [2071] 71 ___/___ [2124] 24 ___/___ [2171] 71 ___/___
[2025] 25 ___/___ [2072] 72 ___/___ [2125] 25 ___/___ [2172] 72 ___/___
[2026] 26 ___/___ [2073] 73 ___/___ [2126] 26 ___/___ [2173] 73 ___/___
[2027] 27 ___/___ [2074] 74 ___/___ [2127] 27 ___/___ [2174] 74 ___/___
[2028] 28 ___/___ [2075] 75 ___/___ [2128] 28 ___/___ [2175] 75 ___/___
[2029] 29 ___/___ [2076] 76 ___/___ [2129] 29 ___/___ [2176] 76 ___/___
[2030] 30 ___/___ [2077] 77 ___/___ [2130] 30 ___/___ [2177] 77 ___/___
[2031] 31 ___/___ [2078] 78 ___/___ [2131] 31 ___/___ [2178] 78 ___/___
[2032] 32 ___/___ [2079] 79 ___/___ [2132] 32 ___/___ [2179] 79 ___/___
[2033] 33 ___/___ [2080] 80 ___/___ [2133] 33 ___/___ [2180] 80 ___/___
[2034] 34 ___/___ [2081] 81 ___/___ [2134] 34 ___/___ [2181] 81 ___/___
[2035] 35 ___/___ [2082] 82 ___/___ [2135] 35 ___/___ [2182] 82 ___/___
[2036] 36 ___/___ [2083] 83 ___/___ [2136] 36 ___/___ [2183] 83 ___/___
[2037] 37 ___/___ [2084] 84 ___/___ [2137] 37 ___/___ [2184] 84 ___/___
[2038] 38 ___/___ [2085] 85 ___/___ [2138] 38 ___/___ [2185] 85 ___/___
[2039] 39 ___/___ [2086] 86 ___/___ [2139] 39 ___/___ [2186] 86 ___/___
[2040] 40 ___/___ [2087] 87 ___/___ [2140] 40 ___/___ [2187] 87 ___/___
[2041] 41 ___/___ [2088] 88 ___/___ [2141] 41 ___/___ [2188] 88 ___/___
[2042] 42 ___/___ [2089] 89 ___/___ [2142] 42 ___/___ [2189] 89 ___/___
[2043] 43 ___/___ [2090] 90 ___/___ [2143] 43 ___/___ [2190] 90 ___/___
[2044] 44 ___/___ [2091] 91 ___/___ [2144] 44 ___/___ [2191] 91 ___/___
[2045] 45 ___/___ [2092] 92 ___/___ [2145] 45 ___/___ [2192] 92 ___/___
[2046] 46 ___/___ [2093] 93 ___/___ [2146] 46 ___/___ [2193] 93 ___/___
[2047] 47 ___/___ [2094] 94 ___/___ [2147] 47 ___/___ [2194] 94 ___/___

32 | Arming and Disarming Report Codes Version 1.0

EVOHD • Programming Guide

Access Control Sections

Use the following section to program access control features, such as assigning doors, as well as schedule and holiday programming.

Assigning Doors to the System

These doors are used to program the access levels in sections [2601] to [2615]. If a door must be linked to the alarm system, install a door contact and
assign it to a zone (see Zone Programming on page 10). Use worksheet 12 to record your settings.
NOTE: Under the Door Numbering column of worksheet 12, enter the eight-digit serial number of the access control module or keypad.
Table 19: Description of the different door options

Door Option Name Description

Each door can be programmed to grant access only to cards assigned to at least one of the door’s partitions (OR Door Access), or to cards
1 OR/AND door access assigned to all the door’s assigned partitions (AND Door Access). Enabling option 1 will set the door in OR mode; disabling it will set the
door in AND mode.
When option 2 is disabled, the access control door is accessed by presenting the access card to the reader. When option 2 is enabled, a
2 User code access reader is not needed to access the controlled door. To access the controlled door, the user must enter an access code and then press ACC
on the K641/K641+/K641R/K641LX keypads, or MENU > 8, and then enter access code, when using the K656 keypad.
When option 3 is enabled, both a valid access control card and user access code must be used. The access control card and user access
3 Card and code access code must belong to the same user. When option 3 is disabled, either a valid access control card or user access code must be used to
access the controlled door (keypad with reader only).
When option 4 is enabled, that door’s reader cannot be used to arm the system, even if the access control card has the arming option
4 Restrict arming on door enabled.
When option 5 is enabled, that door’s reader cannot be used to disarm the system, even if the access control card has the disarming
5 Restrict disarming on door option enabled.

Worksheet 12: Assigning Doors

Door Numbering Door Options Door Labels
Section Door # Eight-digit Serial Number Section Option Section Label
[2201] 1 ___/___/___/___/___/___/___/___ [2251] 12345*** [2301] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2202] 2 ___/___/___/___/___/___/___/___ [2252] 12345*** [2302] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2203] 3 ___/___/___/___/___/___/___/___ [2253] 12345*** [2303] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2204] 4 ___/___/___/___/___/___/___/___ [2254] 12345*** [2304] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2205] 5 ___/___/___/___/___/___/___/___ [2255] 12345*** [2305] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2206] 6 ___/___/___/___/___/___/___/___ [2256] 12345*** [2306] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2207] 7 ___/___/___/___/___/___/___/___ [2257] 12345*** [2307] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2208] 8 ___/___/___/___/___/___/___/___ [2258] 12345*** [2308] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2209] 9 ___/___/___/___/___/___/___/___ [2259] 12345*** [2309] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2210] 10 ___/___/___/___/___/___/___/___ [2260] 12345*** [2310] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2211] 11 ___/___/___/___/___/___/___/___ [2261] 12345*** [2311] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2212] 12 ___/___/___/___/___/___/___/___ [2262] 12345*** [2312] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2213] 13 ___/___/___/___/___/___/___/___ [2263] 12345*** [2313] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2214] 14 ___/___/___/___/___/___/___/___ [2264] 12345*** [2314] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2215] 15 ___/___/___/___/___/___/___/___ [2265] 12345*** [2315] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2216] 16 ___/___/___/___/___/___/___/___ [2266] 12345*** [2316] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2217] 17 ___/___/___/___/___/___/___/___ [2267] 12345*** [2317] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2218] 18 ___/___/___/___/___/___/___/___ [2268] 12345*** [2318] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2219] 19 ___/___/___/___/___/___/___/___ [2269] 12345*** [2319] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2220] 20 ___/___/___/___/___/___/___/___ [2270] 12345*** [2320] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2221] 21 ___/___/___/___/___/___/___/___ [2271] 12345*** [2321] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2222] 22 ___/___/___/___/___/___/___/___ [2272] 12345*** [2322] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2223] 23 ___/___/___/___/___/___/___/___ [2273] 12345*** [2323] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2224] 24 ___/___/___/___/___/___/___/___ [2274] 12345*** [2324] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2225] 25 ___/___/___/___/___/___/___/___ [2275] 12345*** [2325] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2226] 26 ___/___/___/___/___/___/___/___ [2276] 12345*** [2326] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2227] 27 ___/___/___/___/___/___/___/___ [2277] 12345*** [2327] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2228] 28 ___/___/___/___/___/___/___/___ [2278] 12345*** [2328] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2229] 29 ___/___/___/___/___/___/___/___ [2279] 12345*** [2329] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2230] 30 ___/___/___/___/___/___/___/___ [2280] 12345*** [2330] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2231] 31 ___/___/___/___/___/___/___/___ [2281] 12345*** [2331] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__
[2232] 32 ___/___/___/___/___/___/___/___ [2282] 12345*** [2332] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__

Version 1.0 Access Control Sections | 33

 EVOHD • Programming Guide

Schedule Programming
Each schedule determines when users are permitted access. Schedules 001 to 015 (sections [2401] to [2415]) are primary schedules. Primary schedules are
the only schedules that can be assigned to a user access code. Schedules 016 to 032 (sections [2416] to [2432]) are secondary schedules. Secondary
schedules cannot be assigned to a user access code and can only be used as backup schedules. Use worksheet 13 to record your settings for primary
schedules and worksheet 14 on page 35, for secondary schedules.
WARNING: The Start and End Time of a schedule cannot cross over into another day. For example, to program a shift from 10 PM to 6 AM the next morning,
you must program the schedule as follows: Schedule A – start time: 22:00 and end time: 23:59; then program Schedule B – start time: 00:00 and end time:
06:00. The schedule will not be interrupted between 23:59 and 00:00.

Primary Schedules
Worksheet 13: Programming Primary Schedules
Start Time End Time Days of the Week (Turn ON or OFF)
Section Schedule Interval
(From) (To) S M T W T F S H
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2401] 001
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2402] 002
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2403] 003
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2404] 004
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2405] 005
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2406] 006
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2407] 007
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2408] 008
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2409] 009
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2410] 010
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2411] 011
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2412] 012
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2413] 013
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2414] 014
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2415] 015
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2416] 016
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8

34 | Access Control Sections Version 1.0

EVOHD • Programming Guide

Secondary Schedules
Worksheet 14: Programming Secondary Schedules
Start Time End Time Days of the Week (Turn ON or OFF)
Section Schedule Interval
(From) (To) S M T W T F S H
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2401] 017
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2402] 018
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2403] 019
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2404] 020
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2405] 021
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2406] 022
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2407] 023
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2408] 024
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2409] 025
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2410] 026
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2411] 027
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2412] 028
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2413] 029
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2414] 030
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2415] 031
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[2416] 032
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8

Backup Schedules
Each programmed schedule (see Schedule Programming on page 34) can be backed-up or linked to another schedule. The backup will be used in the event
that the first schedule is invalid. In worksheet 15, enter the three-digit number of the schedule you wish to use as the backup. For instance, if you wish to
back-up Schedule 001 to Schedule 011, enter 011 in section [2501].

The control panel will verify up to eight linked schedules, one after another, until it determines whether the card or code is valid. For example, if Schedule
001 is linked to Schedule 005, and Schedule 005 is linked to Schedule 030, then the control panel will verify Schedules 001, 005 and 030.

Worksheet 15: Programming Backup Schedules

Section Schedule Backup Schedule Section Schedule Backup Schedule
[2501] 001 ___/___/___ [2517] 017 ___/___/___
[2502] 002 ___/___/___ [2518] 018 ___/___/___
[2503] 003 ___/___/___ [2519] 019 ___/___/___
[2504] 004 ___/___/___ [2520] 020 ___/___/___
[2505] 005 ___/___/___ [2521] 021 ___/___/___
[2506] 006 ___/___/___ [2522] 022 ___/___/___
[2507] 007 ___/___/___ [2523] 023 ___/___/___
[2508] 008 ___/___/___ [2524] 024 ___/___/___
[2509] 009 ___/___/___ [2525] 025 ___/___/___
[2510] 010 ___/___/___ [2526] 026 ___/___/___
[2511] 011 ___/___/___ [2527] 027 ___/___/___
[2512] 012 ___/___/___ [2528] 028 ___/___/___
[2513] 013 ___/___/___ [2529] 029 ___/___/___
[2514] 014 ___/___/___ [2530] 030 ___/___/___
[2515] 015 ___/___/___ [2531] 031 ___/___/___
[2516] 016 ___/___/___ [2532] 032 ___/___/___

Version 1.0 Access Control Sections | 35

 EVOHD • Programming Guide

Access Levels
Each access level is a combination of access control doors. For example, if option 1 in the first screen is enabled in section [2601], Level 01 will allow access
only to Door 01. Use worksheet 16 to record your settings.
Worksheet 16: Programming Access Levels
Access to Doors (Turn ON or OFF access)
Section Level First Screen (Doors 01 to 08) Second Screen (Doors 09 to 16) Third Screen (Doors 17 to 24) Fourth Screen (Doors 25 to 32)
[2601] 01 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2602] 02 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2603] 03 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2604] 04 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2605] 05 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2606] 06 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2607] 07 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2608] 08 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2609] 09 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2610] 10 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2611] 11 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2612] 12 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2613] 13 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2614] 14 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8
[2615] 15 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8

Holidays
When H is enabled in a schedule, access is permitted to users during the days programmed in the sections below. Use worksheet 17 to record your
settings.
Worksheet 17: Programming Holidays
Days
Section Month First Screen (Days 01 to 08) Second Screen (Days 09 to 16) Third Screen (Days 17 to 24) Fourth Screen (Days 25 to 31)
[2701] January 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2702] February 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2703] March 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2704] April 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2705] May 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2706] June 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2707] July 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2708] August 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2709] September 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2710] October 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2711] November 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *
[2712] December 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 *

Keypad Numbering
Use the following section to number the different keypads configured to your system. Sections [2801] to [2832] are used solely for the purpose of
identifying a keypad in the event buffer. Enter the eight-digit serial number of the keypad you wish to label as Keypad x, where x represents numbers 1 to
32 (e.g., Keypad 12). The event buffer will then display any events pertaining to this keypad, as Keypad 12. Use worksheet 18 on page 36 to record your
settings.
Worksheet 18: Numbering Keypads
Section Keypad # Eight-digit Serial Number Section Keypad # Eight-digit Serial Number
[2801] 1 ___/___/___/___/___/___/___/___ [2817] 17 ___/___/___/___/___/___/___/___
[2802] 2 ___/___/___/___/___/___/___/___ [2818] 18 ___/___/___/___/___/___/___/___
[2803] 3 ___/___/___/___/___/___/___/___ [2819] 19 ___/___/___/___/___/___/___/___
[2804] 4 ___/___/___/___/___/___/___/___ [2820] 20 ___/___/___/___/___/___/___/___
[2805] 5 ___/___/___/___/___/___/___/___ [2821] 21 ___/___/___/___/___/___/___/___
[2806] 6 ___/___/___/___/___/___/___/___ [2822] 22 ___/___/___/___/___/___/___/___
[2807] 7 ___/___/___/___/___/___/___/___ [2823] 23 ___/___/___/___/___/___/___/___
[2808] 8 ___/___/___/___/___/___/___/___ [2824] 24 ___/___/___/___/___/___/___/___
[2809] 9 ___/___/___/___/___/___/___/___ [2825] 25 ___/___/___/___/___/___/___/___
[2810] 10 ___/___/___/___/___/___/___/___ [2826] 26 ___/___/___/___/___/___/___/___
[2811] 11 ___/___/___/___/___/___/___/___ [2827] 27 ___/___/___/___/___/___/___/___
[2812] 12 ___/___/___/___/___/___/___/___ [2828] 28 ___/___/___/___/___/___/___/___
[2813] 13 ___/___/___/___/___/___/___/___ [2829] 29 ___/___/___/___/___/___/___/___
[2814] 14 ___/___/___/___/___/___/___/___ [2830] 30 ___/___/___/___/___/___/___/___
[2815] 15 ___/___/___/___/___/___/___/___ [2831] 31 ___/___/___/___/___/___/___/___
[2816] 16 ___/___/___/___/___/___/___/___ [2832] 32 ___/___/___/___/___/___/___/___

36 | Keypad Numbering Version 1.0

EVOHD • Programming Guide

Remote Control Programming

Use the following section to program the various remote controls in your EVOHD system.

It is possible to configure up to 16 different button templates, which are then assigned to individual users. Each user is pre-programmed with a default
button pattern for their remote control: (1 B) (C 0) (template 0).
NOTE: Button definitions and partition/one-touch definitions are linked together to create a button template. For example, Template 0 is comprised of button
definition [2900] together with partition/one-touch definition [2916].

Remote Control Templates

To use REM3 templates:
1. Define the 16-button definitions in sections [2900] to [2915].
2. Define the 16-partition/one-touch definitions in sections [2916] to [2931].
3. Define which button template is used as the default for remotes in section [2940].
4. Assign button templates to users in section [2941].
Use the information in tables 16 and 17, as well as figure , to enter data in worksheet 19 on page 38.

Table 16: Template data for remote control programming Table 17: Test PGMs and their section numbers

Entry Section Name Description

Function
K641/K641+/ To select a button template as the default template, enter 00
K641R/K641LX
K656 Default button
[2940] to 15, representing button templates in sections [2900] to
template
0 0 Button disabled
[2915].

1 1 Regular arm To assign a button template to a user, select the user when
Assign button prompted, then enter 00 to 15, representing button templates
2 2 Stay arm [2941]
template in sections [2900] to [2915]. If user 000 is selected, all users are
3 3 Instant arm modified.
4 4 Force arm
5 5 Utility key 5
6 6 Utility key 6
7 7 -
8 8 Panic 1 Figure 2: Entering data for section [2916] on a LCD keypad (use for worksheet 19 on page 38).

9 9 Panic 2
Section #
A = STAY A = ARM Panic 3
B = FORCE B = SLEEP Utility key 1
C = ARM C = STAY Utility key 2
D = DISARM D = OFF Utility key 3
Default One-touch
E = BYP E = MENU Utility key 4 (All User’s Partitions) PGM Keys
One-touch
F = MEM F= - Disarm Keys
Default
(No Partitions)

Version 1.0 Remote Control Programming | 37

 Worksheet 19: Programming Remote Controls
REM3 Remote Control REM1/REM2/RAC1/RAC2

PGM 1 PGM 2 PGM 3 PGM 4 PGM 5 PGM 6 PGM 3 & 4 PGM 5 & 6 +
[9] [0] [x] [] [ ] [ ] [x] + [] [ ]+[ ]
+
Default Data 1* B* C* 0* 5 6 0 0 1 B C Disabled
Template Section Section
0 [2900] _____ _____ _____ _____ _____ _____ _____ _____ [2900] _____ _____ _____ _____
1 [2901] _____ _____ _____ _____ _____ _____ _____ _____ [2901] _____ _____ _____ _____
2 [2902] _____ _____ _____ _____ _____ _____ _____ _____ [2902] _____ _____ _____ _____

38 | Programming Remote Controls

3 [2903] _____ _____ _____ _____ _____ _____ _____ _____ [2903] _____ _____ _____ _____
4 [2904] _____ _____ _____ _____ _____ _____ _____ _____ [2904] _____ _____ _____ _____
5 [2905] _____ _____ _____ _____ _____ _____ _____ _____ [2905] _____ _____ _____ _____
6 [2906] _____ _____ _____ _____ _____ _____ _____ _____ [2906] _____ _____ _____ _____
7 [2907] _____ _____ _____ _____ _____ _____ _____ _____ [2907] _____ _____ _____ _____
8 [2908] _____ _____ _____ _____ _____ _____ _____ _____ [2908] _____ _____ _____ _____
9 [2909] _____ _____ _____ _____ _____ _____ _____ _____ [2909] _____ _____ _____ _____
10 [2910] _____ _____ _____ _____ _____ _____ _____ _____ [2910] _____ _____ _____ _____
11 [2911] _____ _____ _____ _____ _____ _____ _____ _____ [2911] _____ _____ _____ _____
12 [2912] _____ _____ _____ _____ _____ _____ _____ _____ [2912] _____ _____ _____ _____
13 [2913] _____ _____ _____ _____ _____ _____ _____ _____ [2913] _____ _____ _____ _____
14 [2914] _____ _____ _____ _____ _____ _____ _____ _____ [2914] _____ _____ _____ _____
15 [2915] _____ _____ _____ _____ _____ _____ _____ _____ [2915] _____ _____ _____ _____

Partitions ** One-touch Keys

1 2 One-touch PGM Keys One-touch Disarm Keys

Default = 0 Default = F  = Disabled (default)

Template Section
(All user’s partitions) (No partitions)  = Enabled
0 [2916] _____ _____  

1 [2917] _____ _____  

2 [2918] _____ _____  

3 [2919] _____ _____  

4 [2920] _____ _____  

5 [2921] _____ _____  

6 [2922] _____ _____  

7 [2923] _____ _____  

8 [2924] _____ _____  

9 [2925] _____ _____  

10 [2926] _____ _____  

11 [2927] _____ _____  

12 [2928] _____ _____  

13 [2929] _____ _____  

14 [2930] _____ _____  

15 [2931] _____ _____  

* REM1/RAC1 and REM2/RAC2 remotes only us the data in these columns.

** If 0 is entered, the associated buttons will control all partitions to which the user is assigned. If F is entered, the associated buttons will be disabled.

EVOHD Programming Guide • Remote Control Programming

EVOHD • Programming Guide

Control Panel Settings

Use the following section to record control panel settings for your EVOHD system. Use worksheet 20 to record your settings.
Table 20: Daylight Saving Time (DST) schedule for EVOHD

Input Value Schedule Used Input Value Schedule Used

000 Mexico; St.-Johns; Bahamas; Turks and Caicos 010 New-Zealand; Chatham
001 Cuba 011 Tonga
002 Brazil 012 Iraq; Syria
003 Chile 013 Israel (TBC)
004 Falkland Islands 014 Lebanon; Kyrgyzstan
005 Paraguay 015 Palestine
006 European Union; United Kingdom; Greenland 016 Egypt
007 Russia and surrounding countries 017 Namibia
South Australia; Victoria; Australian Capital Territory; New
008 018 Canada; United States (default)
South Wales
009 Tasmania; Lord Howe Island 019 New Zealand

Worksheet 20: Control Panel Settings

Default
Section Data Description
Setting
[3001] __/__/__ Installer lock 000
[3002] __/__/__ Power Transformer size 075 VA
[3010] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ PC phone number (32 digits) -
[3011] __/__/__/__ Panel identification 0000
[3012] __/__/__/__ PC password 0000
[3020] __/__ Panel partition (00-08) 00
[3021] __/__ Trouble shutdown (00-15) 00
[3022] __/__/__ DST schedule (see table 20) 018
[3023] __/__/__ Panic Shutdown (0-255) 000

WARNING: You must program the correct transformer size (Ex: 40VA, 75VA). Using a transformer with a lower VA than the one programmed may overload
and damage the transformer.

System Options
Use the following section to program system options on your EVOHD system. Table 21 provides information on sections [3028] through [3035].
Table 21: Description of sections [3028] to [3035]

Section Option Description OFF ON Section Option Description OFF ON

1 Panel Tamper  Disabled  Enabled 1 Enable if using an RTX3 without an  Disabled  Enabled
K641/K641+/K641R/K641LX
Auto-
2 Modem speed  300 bps  detect 2 Future use  Disabled  Enabled
(300/1200
bps)
3 Future use  Disabled  Enabled 3 Future use  Disabled  Enabled
4 Future use  Disabled  Enabled 4 EN 50131 mode  Disabled  Enabled
System Options 1

System Options 1

5 Future use  Disabled  Enabled - -

Section [3028]

Section [3029]

5&6 Anti-mask supervision See table See table

6 Future use  Disabled  Enabled (see table 22) - 22 - 22
7 Future use  Disabled  Enabled 7 Bypass anti-mask trouble  Yes  No

8 Arm Inhibit on Fail to  Disabled  Enabled 8 Restrict arming on Anti-mask  Disabled  Enabled
Communicate trouble
PGM 1 = Two-wire smoke detector
1 input (255)  Disabled  Enabled 1 Partition 1  Disabled  Enabled

2 No bell cut-off during pulse alarm  Disabled  Enabled 2 Partition 2  Disabled  Enabled

3 Daylight Saving Time  Disabled  Enabled 3 Partition 3  Disabled  Enabled

(see table 20)
4 Shabbat feature  Disabled  Enabled 4 Partition 4  Disabled  Enabled
Partition Options 1
System Options 2
Section [3030]

5 Future use  Disabled  Enabled 5 Partition 5  Disabled  Enabled

Section [3031]

6 AC failure not displayed as trouble  Disabled  Enabled 6 Partition 6  Disabled  Enabled

7 Clear bell limit trouble  On restore  Manually 7 Partition 7  Disabled  Enabled

8 Combus speed*  Normal  High 8 Partition 8  Disabled  Enabled

Version 1.0 Control Panel Settings | 39

 EVOHD • Programming Guide

Table 21: Description of sections [3028] to [3035] (Continued)

Section Option Description OFF ON Section Option Description OFF ON

1 Bell/siren output in partition 1  Disabled  Enabled 1 Multiple actions in user menu  Disabled  Enabled
2 Bell/siren output in partition 2  Disabled  Enabled 2 User code length  Fixed  Flexible

3 Bell/siren output in partition 3  Disabled  Enabled 3 User code length (if option 2  4 digits  6 digits
is OFF)**
4 Bell/siren output in partition 4  Disabled  Enabled 4 Power save mode  Disabled  Enabled
Partition Options 2

System Options 3
Section [3032]

Section [3033]
5 Bell/siren output in partition 5  Disabled  Enabled 5 Bypass not displayed while system  Disabled  Enabled
is armed
6 Bell/siren output in partition 6  Disabled  Enabled 6 Trouble latch  Disabled  Enabled
7 Bell/siren output in partition 7  Disabled  Enabled 7 EOL resistor on hardwire zones  Disabled  Enabled
8 Bell/siren output in partition 8  Disabled  Enabled 8 Zone doubling (ATZ)  Disabled  Enabled
Wireless Transmitter Supervision - See table - See table 1 Restrict arming on AC failure  Disabled  Enabled
1&2 Options (see table 23) 23 23
- - 2 Restrict arming on battery failure  Disabled  Enabled
Generate supervision failure if Restrict arming on bell or auxiliary
3 detected on a bypassed  Yes  No 3 failure  Disabled  Enabled
wireless zone

4 Restrict arming on a wireless  Disabled  Enabled 4 Restrict arming on TLM failure  Disabled  Enabled
transmitter supervision failure
System Options 4

System Options 5
Zone & Module Tamper - - 5 Restrict arming on module  Disabled  Enabled
Section [3034]

Section [3035]
5&6 Recognition Options See table See table troubles
(see table 24) 24 24
- - 6 Account number transmission  Partition #  Tel #

7 Generate tamper if detected on  Yes  No 7 Transmit zone status on  Disabled  Enabled

bypass zone serial port †
8 Restrict arming on tamper trouble  Disabled  Enabled 8 Future use  Disabled  Enabled
= Default
* When the combus speed is changed, all operations on the system will be suspended for approximately one minute, while the system adjusts itself.
** All numbers from 000000 to 999999 are valid giving a total of 1,000,000 different possible combinations.
† This option is used by certain event monitoring software, such as Hyperterminal. With BabyWare and printers, it is always being transmitted.

NOTE: You must put a 7Ah battery (or higher) on the system. The speed the battery charges at will vary, depending on power used on the auxiliary port, and the
transformer size.
Table 22: Anti-mask supervision options; options 5 and 6 for section [3029]

Option
Description
5 6
OFF OFF Disabled (default)
OFF ON Generates trouble only (when armed or disarmed)
When armed: alarm
ON OFF When disarmed: generates trouble only

ON ON When armed: alarm

When disarmed: alarm

Table 23: Wireless transmitter supervision options; options 1 and 2 for section [3034]

Option
Description
1 2
OFF OFF Disabled (default)
OFF ON Generates trouble only (when armed or disarmed)
When armed: follows zone types (see Zone Programming on page 10)
ON OFF When disarmed: generates trouble only
When armed: follows zone types (see Zone Programming on page 10)
ON ON When disarmed: generates audible alarm

Table 24: Zone and module tamper recognition options; options 5 and 6 for section [3034]

Option
Description
5 6
OFF OFF Disabled (default)
OFF ON Generates trouble only (when armed or disarmed)
When armed: follows zone types (see Zone Programming on page 10) for zone
ON OFF tamper; generates trouble for module tamper
When disarmed: generates trouble only

ON ON When armed: follows zone types (see Zone Programming on page 10)
When disarmed: generates audible alarm

40 | System Options Version 1.0

EVOHD • Programming Guide

Dialer Options
Use the following section to program dialer options on your EVOHD system. Table 25 provides information on sections [3036] and [3037].
Table 25: Description of sections 3036 to 3037

Section Option Description OFF ON Section Option Description OFF ON

1 - - 1 Call back  Disabled  Enabled
Telephone line monitoring (TLM; See table See table
see table 26) 26 26 Automatic event buffer
2 - - 2  Disabled  Enabled
transmission
Dialer (reporting to monitoring
3  Disabled  Enabled 3 AutoTest report transmission - -
station) See table See table
options (see AutoTest Report
Tone 27 27
4 Dialing method  Pulse  4 Settings on page 42) - -
(DTMF)
Pulse ratio
Keypad beep on successful
5 (E.U. = Europe; N.A. = North  1:2 (E.U.)  1:1.5 (N.A.) 5  Disabled  Enabled
arming/disarming report
America)
6 Busy tone detection  Disabled  Enabled 6 Alternate dialing  Disabled  Enabled
Dialer Options 1

Dialer Options 2
Section [3036]

Section [3037]
Switch to pulse dialing on fifth
7  Disabled  Enabled 7 Dial tone delay (if no dial tone)  Force dial  Hang up
attempt
Report zone restore
Bell/siren upon communication
8  Disabled  Enabled 8 ON = Upon zone closure  Disabled  Enabled
failure, if system is armed
OFF = Upon bell cut-off
= Default

Table 26: Telephone line monitoring (TLM) options; options 1 and 2 for section [3036]

Option
Description
1 2
OFF OFF Disabled (default)
OFF ON When armed: generates an audible alarm
ON OFF When armed: generates a trouble
ON ON TLM silent alarm: becomes an audible alarm

Table 27: AutoTest report transmission options; options 3 and 4 for section [3037]

Option
Description
3 4
Transmit the test report code every time the days programmed in section [3040] have
OFF OFF
elapsed, at the time programmed in section [3041]; (default)
When armed: transmit test report code every time the time programmed in section
[3042] has elapsed
OFF ON
When disarmed: transmit test report code every time the time programmed in section
[3043] has elapsed
The control panel will transmit the test report code every hour, on the minute value
programmed in section [3041] (the last two digits); the first two digits of section [3041]
ON OFF
will be ignored; for example, if 10:25 was programmed in section [3041], the test report
code would be transmitted at the 25th minute of every hour; i.e., 11:25, 12:25, etc.
The test report code will be transmitted when one or more of the conditions of the
ON ON second and third options, listed above, are met; i.e., option 3 = OFF and option 4 = ON,
or option 3 = ON and option 4 = OFF

Version 1.0 Dialer Options | 41

 EVOHD • Programming Guide

Additional Options
Use the following section to program additional options on your EVOHD system. Table 28 provides information on sections [3038]. Use worksheets 21, 22,
and 23 to record your settings.
Table 28: Description of sections [3038] and [2750]

Section Option Description OFF ON Section Option Description OFF ON

1 Access control feature  Disabled  Enabled 1 Reporting of Request for Exit  Disabled  Enabled
Log Request for Exit in event Reporting of Door control
2  Disabled  Enabled 2  Disabled  Enabled
buffer* command by PC
Log Door Left Open Restore in Reporting of Access denied
 

Access Event Reporting Options

3 Disabled  Enabled 3 Disabled  Enabled
event buffer by User
Log Door Forced Restore in event Reporting of Access Granted
4  Disabled  Enabled 4  Disabled  Enabled
buffer by User
Access Control Options

Reporting of Door Left Open

5 Burglar alarm on forced door  Disabled  Enabled 5  Disabled  Enabled
and Restore
Section [3038]

Section [2750]
Skip exit delay when arming with Reporting of Door Forced
6  Disabled  Enabled 6  Disabled  Enabled
access card Open and Restore
7 Burglar alarm on door left open  Disabled  Enabled 7 Future Use - -
8 Who has access during clock loss  All users  Masters* 8 Future Use - -
= Default
* Also includes users with 00 for schedule access.
WARNING: Since Request for Exit events can occur often, the event buffer may fill up quickly.

Schedule Tolerance Window

Worksheet 21: Schedule Tolerance Window
Section Data Description Default Setting
[3039] ___/___/___ (x 1 min.) Schedule tolerance window 000

AutoTest Report Settings

Worksheet 22: AutoTest Report Settings
Section Data Description Default Setting
[3040] ___/___/___ (x 1 day; 000 = disabled) Schedule tolerance window 000
[3041] ___/___ : ___/___ (hr. 00-23 & min. 00-59) AutoTest report time of day 00:00
[3042] ___/___/___ (000-255 x 1 min.) Armed report delay 5 minutes
[3043] ___/___/___ (000-255 x 1 min.) Disarmed report delay 60 minutes

NOTE: Refer to table 27 on page 41 for details

Timings
Worksheet 23: Timings Settings
Section Data Description Default Setting
[3051] ___/___/___ (000-255) Ring counter 008
[3052] ___/___/___ (000-255 x 4 sec.) Answering machine delay override delay 32 seconds
[3053] ___/___/___ (000-255 x 2sec.) TLM fail timer 32 seconds
[3054] ___/___/___ (000-127 x 1sec.) Delay between dialing attempts 20 seconds
[3055] ___/___/___ (000-255 x 1 sec.; 000 = instant report) Delay alarm transmission timer 000
[3056] ___/___/___ (000-255 x 1 attempt) Maximum dialing attempts 8 attempts
[3057] ___/___/___ (000-127 x 1 second) Pager delay before data transmission 20 seconds
[3058] ___/___/___ (000-255 x 1 min.; 000 = instant report) Delay power failure report 30 minutes
[3059] ___/___/___ (000-255 x 1 repeat; 000 = no repeat) Repeat pager report code transmission 000
[3060] ___/___/___ (000-255 x 1 min.) Power failure restore delay report 030 minutes

42 | Additional Options Version 1.0

EVOHD • Programming Guide

Communication Settings
Use the following section to program communication settings on your EVOHD system.

Account Numbers
Use worksheet 24 on page 43 to record your settings.
WARNING: Only the SIA format supports the 0 = 0 digit in its account numbers. Account numbers that use other reporting formats do not support the
0 = 0 digit. In its place, enter A by pressing STAY (for the K641/K641+/K641R/K641LX keypads), or by pressing ARM (for the K656 keypad). When using the
SIA format, and the account number transmission (see option 6, in section [3035] on page 40) corresponds to the partition, the control panel only uses the
partition 1 account number programmed in section [3061], but the report code includes the partition number.

Worksheet 24: Account Number Settings

Section Data (Hex Value: 0000-FFFF) Description Default Setting
[3061] ___/___/___/___ (If less than four digits, press ENTER) Account number 1 (partition 1* / MSTN 1**) 0000
[3062] ___/___/___/___ (If less than four digits, press ENTER) Account number 2 (partition 2* / MSTN 2**) 0000
[3063] ___/___/___/___ (If less than four digits, press ENTER) Account number 3 (partition 3* / MSTN 3**) 0000
[3064] ___/___/___/___ (If less than four digits, press ENTER) Account number 4 (partition 4* / MSTN 4**) 0000
[3065] ___/___/___/___ (If less than four digits, press ENTER) Account number 5 (partition 5* / NA**) 0000
[3066] ___/___/___/___ (If less than four digits, press ENTER) Account number 6 (partition 6* / NA**) 0000
[3067] ___/___/___/___ (If less than four digits, press ENTER) Account number 7 (partition 7* / NA**) 0000
[3068] ___/___/___/___ (If less than four digits, press ENTER) Account number 8 (partition 8* / NA**) 0000

* Option 6 in section [3035] is disabled.

** Option 6 in section [3035] is enabled.
NOTE: MSTN is the abbreviation for Monitoring Station Telephone Number.

Reporting Formats
Use worksheets 25 and 26 to record your settings.
Table 29: Reporting formats for section [3070]

Input Value Description Input Value Description

0 Ademco Slow (1400 Hz, 1900 Hz, 10 BPS) 5 Ademco contact ID

1 Silent Knight Fast (1400 Hz, 1900 Hz, 20 BPS) 6 SIA FSK (level 2)
2 Sescoa (2300 Hz, 1800 Hz, 20 BPS) 7 Pager
3 Ademco Express (DTMF 4+2)
4 Pager contact ID

NOTE: For more information on contact ID and SIA reporting formats, see table 49 (List of automatic report codes), on page 57.
Worksheet 25: Reporting Formats for Section [3070]
Section Tel. # 1 Format Tel. # 2 Format Tel. # 3 Format Tel. # 4 Format Description
[3070] ___ ___ ___ ___ Reporting formats for telephone numbers 1 to 4 / IP Receiver 1 to 4
NOTE: Use the same format for each number. Only the pager format can be used with other reporting formats.
Table 30: Special telephone number keys for the different keypads

Function K641/K641+/K641R/K641LX K656 Grafica

STAY STAY
*
# FORCE SLEEP
#
Switch to tone dialing (T) ARM ARM (Press key until desired letter/
symbol appears)
Wait for second dial tone (W) DISARM OFF

4-second pause (P) BYP MENU

Clear CLEAR CLEAR Left action key (clear)

Delete TRBL TRBL -
Delete from cursor to the end ACC ACC -
Insert space MEM MEM -
Dial 9 for outside line 9 + STAY 9 + STAY -

WARNING: To disable call-waiting for North American installations using either contact ID or SIA reporting formats, enter *70, and then either P (4-second
pause) or W (wait for second dial tone) before entering the phone number. This applies to section [3071] to [3074] (see worksheet 26).

Version 1.0 Communication Settings | 43

 EVOHD • Programming Guide

Worksheet 26: Reporting Formats for Sections [3071] to [3074]

Section Data (Press ENTER if less than 32 digits) Description
[3071] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Monitoring station/pager telephone # 1
[3072] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Monitoring station/pager telephone # 2
[3073] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Monitoring station/pager telephone # 3
[3074] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Monitoring station/pager telephone # 4

System Event Call Direction

Use the following section to program system event call directions on your EVOHD system. Table 31 provides information on sections [3080] and [3081].
Table 31: Description of sections [3080] to [3081]

Section Option Description OFF ON Section Option Description OFF ON

1 Call telephone # 1/IP receiver # 1  Disabled  Enabled 1 Call telephone # 1/IP receiver # 1  Disabled  Enabled
2 Call telephone # 2/IP receiver # 2  Disabled  Enabled 2 Call telephone # 2/IP receiver # 2  Disabled  Enabled
 
System Troubles & Trouble Restores

3 Call telephone # 3/IP receiver # 3 Disabled  Enabled 3 Call telephone # 3/IP receiver # 3 Disabled  Enabled
4 Call telephone # 4/IP receiver # 4  Disabled  Enabled 4 Call telephone # 4/IP receiver # 4  Disabled  Enabled
Backup on telephone # 1/IP Backup on telephone # 1/IP
5  Disabled  Enabled 5  Disabled  Enabled
receiver # 1 receiver # 1
Backup on telephone # 2/IP Backup on telephone # 2/IP
6  Disabled  Enabled 6  Disabled  Enabled

Special Reporting
receiver # 2 receiver # 2
Section [3080]

Section [3081]
Backup on telephone # 3/IP Backup on telephone # 3/IP
7  Disabled  Enabled 7  Disabled  Enabled
receiver # 3 receiver # 3
Backup on telephone # 4/IP Backup on telephone # 4/IP
8  Disabled  Enabled 8  Disabled  Enabled
receiver # 4 receiver # 4
= Default

NOTE: For sections [3080] and [3081], enable only one of options 5 to 8.
Use the following section to program the VDMP3 Voice Module on your EVOHD system. Use worksheets 27 and 28 to record your settings.
You can program up to eight telephone numbers which the VDMP3 will call in sequence, in case of an alarm. Telephone numbers should be programmed
in a priority-based sequence, as the VDMP3 will begin with telephone number 1. See table 32 for information on sections [3087] and [3090].
Table 32: Description of sections [3087] and [3090]

Section Option Description OFF ON Section Option Description OFF ON

1 Feature (PGM) 1  Disabled  Enabled 1 Voice module incoming call  Disabled  Enabled
2 Feature (PGM) 2  Disabled  Enabled 2 Voice reporting  Disabled  Enabled
3 Feature (PGM) 3  Disabled  Enabled 3 Report AC/battery trouble  Disabled  Enabled
VDMP3 Features (PGM)

4 Feature (PGM) 4  Disabled  Enabled 4 Inhibit disarming on voice module  Disabled  Enabled
VDMP3 Functions


Section [3087]

Section [3090]

5 Feature (PGM) 5 Disabled  Enabled

6 Feature (PGM) 6  Disabled  Enabled
7 Feature (PGM) 7  Disabled  Enabled
8 Feature (PGM) 8  Disabled  Enabled
= Default

NOTE: To see how the VDMP3 features relate to the EVOHD utility key functions, refer to the EVOHD Reference and Installation Manual (available online only).
Worksheet 27: VDMP3 Settings
Section Data Description Default Setting
[3088] ___/___/___ (000-127 x 1 sec.) Delay before sending the voice message 003
[3089] ___/___/___ (000-255 x 1 repetition) Defines the number of times the voice message is repeated 008

Section Data (Press ENTER if less than 32 digits) Description

[3091] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 1
[3092] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 2
[3093] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 3
[3094] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 4
[3095] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 5
[3096] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 6
[3097] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 7
[3098] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__/ Voice module telephone number 8

44 | System Event Call Direction Version 1.0

EVOHD • Programming Guide

NOTE: For extra key functions, see table 30 (Special telephone number keys for the different keypads), on page 43.
Table 33: Description of sections [3133] to [3833]

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3133] [3233] [3333] [3433] [3533] [3633] [3733] [3833]
OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON OFF ON
1 Telephone number 1                
2 Telephone number 2                

3 Telephone number 3                

4 Telephone number 4                

5 Telephone number 5                

6 Telephone number 6                

7 Telephone number 7                

8 Telephone number 8                

= Default

PCS GSM/GPRS Communicator Module

Use the following section to program the PCS GSM/GPRS Communicator Module on your EVOHD system. Use worksheets 29 to 37 to record your settings

BabyWare/PCS Module Connection

Worksheet 28: BabyWare/PCS Module Connection Settings
Section Data Description
[2960] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/ Access point name (APN) part 1 (e.g., internet.com)
[2961] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/ Access point name (APN) part 2 (e.g., wap.provider.com)
[2962] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/ User name part 1
[2963] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/ User name part 2
[2964] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/ Password part 1
[2965] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/ Password part 2
[2966] ___/___/___/___/___ Port (default = 10000)
[3013] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/ Installer software password (BabyWare) (default = admin)

PCS Module Programming

Table 34: Section [2950] GSM Options

Description
Option Option Description
(GSM Reporting)
1 2 Primary Backup 3&4 Future use
OFF OFF Landline Landline 7 Future use
OFF ON
OFF ON Landline GSM
 Disabled  Enabled PCS Tamper
ON OFF GSM Landline 8
OFF ON
ON ON GSM GSM GSM RF jamming supervision
 Disabled  Enabled

Description
5 6 Default
(GSM/GPRS No Service Trouble Feedback)
OFF OFF Disabled
ON OFF When disarmed: trouble only; when armed: trouble only
OFF ON When disarmed: trouble only; when armed: audible only
ON ON Silent alarm becomes audible alarm

PCS Module (GSM) Programming

Worksheet 29: PCS Module (GSM) Settings
Section Data Description
[2951] ___/___ Default: 00 Panel supervision lost (reporting code)
[2952] ___/___/___ (000 to 255) x 2 seconds GSM no service timer (default: 016)
[2953] ___/___/___ (000 to 255) SMS language (default: 000) refer to table 35

Version 1.0 PCS GSM/GPRS Communicator Module | 45

 EVOHD • Programming Guide

Table 35: SMS Language ID

ID Language ID Language ID Language ID Language

000 English 006 Portuguese 012 Croatian 018 Slovak
001 French 007 German 013 Greek 019 Chinese
002 Spanish 008 Turkish 014 Hebrew 020 Serbian
003 Italian 009 Hungarian 015 Russian 021 to 255 Future use
004 Swedish 010 Czech 016 Bulgarian
005 Polish 011 Dutch 017 Romanian

SMS Site Name

Worksheet 30: SMS Site Name Settings
Section Label
[2954] __/__/__/__/__/__/__/__/__/__/__/__/__/__/__/__

IP150/PCS Module (GPRS) Options

Table 36: Section [2975] IP/GPRS Options

Option Description
5 6 (IP No Service Trouble Feedback)

OFF OFF Disabled

ON OFF When disarmed: trouble only; when armed: trouble only
OFF ON When disarmed: trouble only; when armed: audible alarm
ON ON Silent alarm becomes audible alarm
Option Description
7
OFF ON
 As IP/GPRS  In addition Use dialer reporting
reporting to IP/GPRS
backup reporting
8
OFF ON Enable IP/GPRS reporting
 Disabled  Enabled

IP/GPRS Reporting Account Programming

Worksheet 31: IP Account Number Settings
Section Data Description
[2976] ___/___/___/___ IP account partition 1/account 1 number
[2977] ___/___/___/___ IP account partition 2/account 2 number
[2978] ___/___/___/___ IP account partition 3/account 3 number
[2979] ___/___/___/___ IP account partition 4/account 4 number
[2980] ___/___/___/___ IP account partition 5/account 5 number
[2981] ___/___/___/___ IP account partition 6/account 6 number
[2982] ___/___/___/___ IP account partition 7/account 7 number
[2983] ___/___/___/___ IP account partition 8/account 8 number

Worksheet 32: IP Receiver 1 Configuration

Section Data Description
WAN1 IP address (e.g., 100.100.100.100); for one or two-digit numbers, add 0s
___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ before the first digit
___/___/___/___/___ WAN1 IP port (default: 10000)
[2984] ___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ WAN2 IP address
___/___/___/___/___ WAN2 IP port
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ IP password (e.g., 123456)
___/___ IP profile (e.g., 01)
[2985] To register IP/GPRS module, press ARM

46 | PCS GSM/GPRS Communicator Module Version 1.0

EVOHD • Programming Guide

Worksheet 33: IP Receiver 2 Configuration

Section Data Description
WAN1 IP address (e.g., 100.100.100.100); for one or two-digit numbers, add 0s
___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ before the first digit
___/___/___/___/___ WAN1 IP port (default: 10000)
[2986] ___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ WAN2 IP address
___/___/___/___/___ WAN2 IP port
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ IP password (e.g., 123456)
___/___ IP profile (e.g., 01)
[2987] To register IP/GPRS module, press ARM

Worksheet 34: IP Receiver 3 Configuration

Section Data Description
WAN1 IP address (e.g., 100.100.100.100); for one or two-digit numbers, add 0s
___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ before the first digit
___/___/___/___/___ WAN1 IP port (default: 10000)
[2988] ___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ WAN2 IP address
___/___/___/___/___ WAN2 IP port
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ IP password (e.g., 123456)
___/___ IP profile (e.g., 01)
[2989] To register IP/GPRS module, press ARM

Worksheet 35: IP Receiver 4 Configuration

Section Data Description
WAN1 IP address (e.g., 100.100.100.100); for one or two-digit numbers, add 0s
___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ before the first digit
___/___/___/___/___ WAN1 IP port (default: 10000)
[2990] ___/___/___ . ___/___/___ . ___/___/___ . ___/___/___ WAN2 IP address
___/___/___/___/___ WAN2 IP port
___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ IP password (e.g., 123456)
___/___ IP profile (e.g., 01)
[2991] To register IP/GPRS module, press ARM

IP Module/PCS Module Report Code Programming

Worksheet 36: PCS Module Report Codes
Section Data Description
___/___ Missing PCS module
___/___ Missing PCS module restore
[2967]
___/___ PCS tamper
___/___ PCS tamper restore
___/___ GSM RF jam
___/___ GSM RF jam restore
[2968]
___/___ GSM no service
___/___ GSM no service restore
___/___ Fail to communicate IPR512 1
___/___ Fail to communicate IPR512 1 restore
[2969]
___/___ Fail to communicate IPR512 2
___/___ Fail to communicate IPR512 2 restore
___/___ Fail to communicate IPR512 3
___/___ Fail to communicate IPR512 3 restore
[2970]
___/___ Fail to communicate IPR512 4
___/___ Fail to communicate IPR512 4 restore

Worksheet 37: IP Module Report Codes

Section Data Description
___/___ Missing IP module
___/___ Missing IP Restore
[2992]
___/___ IP no service
___/___ IP no service restore
___/___ Fail to communicate IPR512 1
___/___ Fail to communicate IPR512 1 restore
[2993]
___/___ Fail to communicate IPR512 2
___/___ Fail to communicate IPR512 2 restore
___/___ Fail to communicate IPR512 3
___/___ Fail to communicate IPR512 3 restore
[2994]
___/___ Fail to communicate IPR512 4
___/___ Fail to communicate IPR512 4 restore

Version 1.0 PCS GSM/GPRS Communicator Module | 47

 EVOHD • Programming Guide

Partition Settings
Use the following section to program the various partitions on your EVOHD system. Use worksheet 38 to 44 to record your settings.
Worksheet 38: Partition Label Settings for Sections [3100] to [3800]
Section Partition Label Partition #
[3100] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 1
[3200] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 2
[3300] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 3
[3400] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 4
[3500] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 5
[3600] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 6
[3700] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 7
[3800] ___/___/___/___/___/___/___/___/___/___/___/___/___/___/___/___ 8

Auto-arm Times
Worksheet 39: Auto-arm Time Settings
Section Data (Hours 00-23; Minutes (00-59) Partition # Section Data (Hours 00-23; Minutes (00-59) Partition #
[3101] ___/___ : ___/___ 1 [3501] ___/___ : ___/___ 5
[3201] ___/___ : ___/___ 2 [3601] ___/___ : ___/___ 6
[3301] ___/___ : ___/___ 3 [3701] ___/___ : ___/___ 7
[3401] ___/___ : ___/___ 4 [3801] ___/___ : ___/___ 8

Arming/Disarming Report Schedules

Worksheet 40: Arming Report Schedule Settings
Start Time End Time Days of the Week (Turn ON or OFF)
Section Partition # Schedule Interval
(From) (To) S M T W T F S H
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3102] 1 001
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3202] 2 002
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3302] 3 003
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3402] 4 004
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3502] 5 005
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3602] 6 006
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3702] 7 007
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3802] 8 008
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8

NOTE: If a partition is armed outside a schedule, the panel will send an Early to Close [3916] and/or Late to Close [3917] report code (see worksheet 45 on page 54).

Worksheet 41: Disarming Report Schedule Settings

Start Time End Time Days of the Week (Turn ON or OFF)
Section Partition # Schedule Interval
(From) (To) S M T W T F S H
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3103] 1 001
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3203] 2 002
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3303] 3 003
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3403] 4 004
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3503] 5 005
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3603] 6 006
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3703] 7 007
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3803] 8 008
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
NOTE: If partition is disarmed outside schedule, panel will send an Early to Open [3926] and/or Late to Open [3927] report code (see worksheet 45 on page 54).

48 | Partition Settings Version 1.0

 Partition Timers
Worksheet 42: Partition Timer Settings
Description Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8
(Decimal Values from 000 to 255) Section Data Section Data Section Data Section Data Section Data Section Data Section Data Section Data
Arming/disarming schedule tolerance window
[3104] __/__/__ [3204] __/__/__ [3304] __/__/__ [3404] __/__/__ [3504] __/__/__ [3604] __/__/__ [3704] __/__/__ [3804] __/__/__
(Data x 1 min.; default: 000)
Number of invalid codes before lockout
[3105] __/__/__ [3205] __/__/__ [3305] __/__/__ [3405] __/__/__ [3505] __/__/__ [3605] __/__/__ [3705] __/__/__ [3805] __/__/__
(Data x 1 attempt; default: 005)
Keypad lockout duration
[3106] __/__/__ [3206] __/__/__ [3306] __/__/__ [3406] __/__/__ [3506] __/__/__ [3606] __/__/__ [3706] __/__/__ [3806] __/__/__
(Data x 1 min.; Report only: 000; Default: 015)
No movement timer
[3107] __/__/__ [3207] __/__/__ [3307] __/__/__ [3407] __/__/__ [3507] __/__/__ [3607] __/__/__ [3707] __/__/__ [3807] __/__/__
(Data x 5 min.; Default: disabled)
Exit delay timer
[3108] __/__/__ [3208] __/__/__ [3308] __/__/__ [3408] __/__/__ [3508] __/__/__ [3608] __/__/__ [3708] __/__/__ [3808] __/__/__
(Data x 1 sec.; Default: 060 sec.)
Recent closing delay

EVOHD Programming Guide • Partition Settings

[3109] __/__/__ [3209] __/__/__ [3309] __/__/__ [3409] __/__/__ [3509] __/__/__ [3609] __/__/__ [3709] __/__/__ [3809] __/__/__
(Data x 1 sec.; Default: disabled)
Intellizone delay
[3110] __/__/__ [3210] __/__/__ [3310] __/__/__ [3410] __/__/__ [3510] __/__/__ [3610] __/__/__ [3710] __/__/__ [3810] __/__/__
(Data x 1 sec.; default: 032 sec.)
Entry delay 1
[3111] __/__/__ [3211] __/__/__ [3311] __/__/__ [3411] __/__/__ [3511] __/__/__ [3611] __/__/__ [3711] __/__/__ [3811] __/__/__
(Data x 1 sec.; default: 030 sec.)
Entry delay 2
[3112] __/__/__ [3212] __/__/__ [3312] __/__/__ [3412] __/__/__ [3512] __/__/__ [3612] __/__/__ [3712] __/__/__ [3812] __/__/__
(Data x 1 sec.; Default: 060 sec.)
Bell cut-off timer
[3113] __/__/__ [3213] __/__/__ [3313] __/__/__ [3413] __/__/__ [3513] __/__/__ [3613] __/__/__ [3713] __/__/__ [3813] __/__/__
(Data x 1 min.; Default: 4 min.)
Auto zone shutdown
[3114] __/__/__ [3214] __/__/__ [3314] __/__/__ [3414] __/__/__ [3514] __/__/__ [3614] __/__/__ [3714] __/__/__ [3814] __/__/__
(000 to 015 alarms; default: disabled)
Maximum number of zones that can be bypassed
[3115] __/__/__ [3215] __/__/__ [3315] __/__/__ [3415] __/__/__ [3515] __/__/__ [3615] __/__/__ [3715] __/__/__ [3815] __/__/__
(Data x 1 zone; Default: unlimited)
Recycle delay
[3116] __/__/__ [3216] __/__/__ [3316] __/__/__ [3416] __/__/__ [3516] __/__/__ [3616] __/__/__ [3716] __/__/__ [3816] __/__/__
(Data x 1 min.; Default: disabled)
Number of recycles
[3117] __/__/__ [3217] __/__/__ [3317] __/__/__ [3417] __/__/__ [3517] __/__/__ [3617] __/__/__ [3717] __/__/__ [3817] __/__/__
(Data x 1 attempt; Default: unlimited)
Police code timer
[3118] __/__/__ [3218] __/__/__ [3318] __/__/__ [3418] __/__/__ [3518] __/__/__ [3618] __/__/__ [3718] __/__/__ [3818] __/__/__
(Data x 1 min.; Default: disabled)
Closing delinquency timer
[3119] __/__/__ [3219] __/__/__ [3319] __/__/__ [3419] __/__/__ [3519] __/__/__ [3619] __/__/__ [3719] __/__/__ [3819] __/__/__
(Data x 1 day; Default: disabled)
Postpone auto-arm delay
[3120] __/__/__ [3220] __/__/__ [3320] __/__/__ [3420] __/__/__ [3520] __/__/__ [3620] __/__/__ [3720] __/__/__ [3820] __/__/__
(Data x 15 min.; Default: 0)

Partition Options 1
Table 37: Description of sections [3121] to [3821]

Section Option Description OFF ON Section Option Description OFF ON

1 Switch to Stay arm (if no delay zone is opened)  Disabled  Enabled 1 Arm/disarm with partition 1  Disabled  Enabled
2 Arm/disarm with partition 2  Disabled  Enabled 2 Switch to Stay arm (if no delay zone is opened)  Disabled  Enabled
3 Arm/disarm with partition 3  Disabled  Enabled 3 Arm/disarm with partition 3  Disabled  Enabled
4 Arm/disarm with partition 4  Disabled  Enabled 4 Arm/disarm with partition 4  Disabled  Enabled
5 Arm/disarm with partition 5  Disabled  Enabled 5 Arm/disarm with partition 5  Disabled  Enabled
6 Arm/disarm with partition 6  Disabled  Enabled 6 Arm/disarm with partition 6  Disabled  Enabled
7 Arm/disarm with partition 7  Disabled  Enabled 7 Arm/disarm with partition 7  Disabled  Enabled
 

Section [3121]
Partition 1
Section [3221]
Partition 2

8 Arm/disarm with partition 8  Disabled Enabled 8 Arm/disarm with partition 8  Disabled Enabled

Partition Timer Settings | 49

 Table 37: Description of sections [3121] to [3821] (Continued)

Section Option Description OFF ON Section Option Description OFF ON

1 Arm/disarm with partition 1  Disabled  Enabled 1 Arm/disarm with partition 1  Disabled  Enabled
2 Arm/disarm with partition 2  Disabled  Enabled 2 Arm/disarm with partition 2  Disabled  Enabled
3 Switch to Stay arm (if no delay zone is opened)  Disabled  Enabled 3 Arm/disarm with partition 3  Disabled  Enabled
4 Arm/disarm with partition 4  Disabled  Enabled 4 Switch to Stay arm (if no delay zone is opened)  Disabled  Enabled

50 | Partition Timer Settings

5 Arm/disarm with partition 5  Disabled  Enabled 5 Arm/disarm with partition 5  Disabled  Enabled
6 Arm/disarm with partition 6  Disabled  Enabled 6 Arm/disarm with partition 6  Disabled  Enabled
7 Arm/disarm with partition 7  Disabled  Enabled 7 Arm/disarm with partition 7  Disabled  Enabled
 

Section [3321]
Partition 3
Section [3421]
Partition 4
8 Arm/disarm with partition 8  Disabled Enabled 8 Arm/disarm with partition 8  Disabled Enabled
1 Arm/disarm with partition 1  Disabled  Enabled 1 Arm/disarm with partition 1  Disabled  Enabled
2 Arm/disarm with partition 2  Disabled  Enabled 2 Arm/disarm with partition 2  Disabled  Enabled
3 Arm/disarm with partition 3  Disabled  Enabled 3 Arm/disarm with partition 3  Disabled  Enabled
4 Arm/disarm with partition 4  Disabled  Enabled 4 Arm/disarm with partition 4  Disabled  Enabled
5 Switch to Stay arm (if no delay zone is opened)  Disabled  Enabled 5 Arm/disarm with partition 5  Disabled  Enabled
6 Arm/disarm with partition 6  Disabled  Enabled 6 Switch to Stay arm (if no delay zone is opened)  Disabled  Enabled
7 Arm/disarm with partition 7  Disabled  Enabled 7 Arm/disarm with partition 7  Disabled  Enabled
 

Section [3521]
Partition 5
Section [3621]
Partition 6
8 Arm/disarm with partition 8  Disabled Enabled 8 Arm/disarm with partition 8  Disabled Enabled
1 Arm/disarm with partition 1  Disabled  Enabled 1 Arm/disarm with partition 1  Disabled  Enabled
2 Arm/disarm with partition 2  Disabled  Enabled 2 Arm/disarm with partition 2  Disabled  Enabled
3 Arm/disarm with partition 3  Disabled  Enabled 3 Arm/disarm with partition 3  Disabled  Enabled
4 Arm/disarm with partition 4  Disabled  Enabled 4 Arm/disarm with partition 4  Disabled  Enabled
5 Arm/disarm with partition 5  Disabled  Enabled 5 Arm/disarm with partition 5  Disabled  Enabled
6 Arm/disarm with partition 6  Disabled  Enabled 6 Arm/disarm with partition 6  Disabled  Enabled
7 Switch to Stay arm (if no delay zone is opened)  Disabled  Enabled 7 Arm/disarm with partition 7  Disabled  Enabled
 

Section [3721]
Partition 7
Section [3821]
Partition 8
8 Arm/disarm with partition 8  Disabled Enabled 8 Switch to Stay arm (if no delay zone is opened)  Disabled Enabled
= Default

EVOHD Programming Guide • Partition Settings

 Partition Arming/Disarming Options
Table 38: Description of partition arming/disarming options

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3122] [3222] [3322] [3422] [3522] [3622] [3722] [3822]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Timed auto-arming                

2 No Movement auto-arming                

3 Arming method for auto arm (OFF = Force arming; ON = Stay arming)                

4 Exit delay termination                

5 Future use - - - - - - - - - - - - - - - -
6 Future use - - - - - - - - - - - - - - - -
7 Future use - - - - - - - - - - - - - - - -

EVOHD Programming Guide • Partition Settings

8 Follow zone switches to Entry Delay 2, when delay zone is bypassed                
= Default

Partition Panic Alarm Options

Table 39: Description of partition panic alarm options

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3123] [3223] [3323] [3423] [3523] [3623] [3723] [3823]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Panic 1 (K641/K641+/641R/K641LX: keys 1 & 3; K656: [ ])                

2 Panic 2 (K641/K641+/641R/K641LX: keys 4 & 6; K656: [ ])                

3 Panic 3 (K641/K641+/K641R/K641LX: keys 7 & 9; K656: [ ])                

4 Panic 1 alarm type (OFF = report only; ON = audible alarm)                

5 Panic 2 alarm type (OFF = report only; ON = audible alarm)                

6 Panic 3 alarm type (OFF = report only; ON = fire alarm)                

7 Always report disarming (OFF = always; ON = only after alarm)                

8 Auto-force on regular arming                

= Default

Partition Bell Squawk Options

Table 40: Description of partition bell squawk options

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3124] [3224] [3324] [3424] [3524] [3624] [3724] [3824]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Bell squawk upon disarming                

2 Bell squawk upon arming                

3 Bell squawk upon auto-arming                

4 Bell squawk during exit delay                

5 Bell squawk during entry delay                

6 Bell squawk upon remote arming/disarming                

7 Ring back: bell squawk if disarmed after alarm                

8 Ring back: keypad beeps if disarmed after alarm                

= Default

Partition Timer Settings | 51

 Partition One-touch Options
Table 41: Description of partition one-touch options

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3125] [3225] [3325] [3425] [3525] [3625] [3725] [3825]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 One-touch regular arming                
       

52 | Partition Timer Settings

2 One-touch Stay arming        
3 One-touch Instant arming                

4 One-touch Force arming                

5 One-touch Stay or Instant disarming                

6 One-touch bypass programming                

7 One-touch event display                

8 No exit delay when arming with remote control                

= Default

If a keypad is assigned to more than one partition, the one-touch feature must be enabled in all the keypad’s assigned partitions. For instance, to enable the one-touch Regular Arming feature of a keypad
assigned to partitions 1, 2, and 5, enable option 1 of sections [3125], [3225], and [3525].

Partition Special Options

Table 42: Description of partition special options

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3126] [3226] [3326] [3426] [3526] [3626] [3726] [3826]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Intellizone delay                
2 Intellizone double knockout and zone crossing                
3 Intellizone zone crossing                
4 Auto-force on Stay arming                

5 Police code is generated on zone crossing only                

6 Future use - - - - - - - - - - - - - - - -
7 Future use - - - - - - - - - - - - - - - -
8 Future use - - - - - - - - - - - - - - - -
= Default

Partition Arming/Disarming Event Call Direction

Table 43: Description of partition arming/disarming event call direction

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3127] [3227] [3327] [3427] [3527] [3627] [3727] [3827]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Call telephone number 1/IP receiver 1                
2 Call telephone number 2/IP receiver 2                

3 Call telephone number 3/IP receiver 3                

4 Call telephone number 4/IP receiver 4                

5 Backup on telephone number 1/IP receiver 1                

6 Backup on telephone number 2/IP receiver 2                

7 Backup on telephone number 3/IP receiver 3                

8 Backup on telephone number 4/IP receiver 4                

EVOHD Programming Guide • Partition Settings

= Default
 NOTE: Enable only one option from options 5 to 8 (inclusive).

Partition Alarm/Alarm Restore Event Call Direction

Table 44: Description of partition alarm/alarm restore event call direction

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3128] [3228] [3328] [3428] [3528] [3628] [3728] [3828]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Call telephone number 1/IP receiver 1                
2 Call telephone number 2/IP receiver 2                

3 Call telephone number 3/IP receiver 3                

53 | Special Arming Exit Delay Settings

4 Call telephone number 4/IP receiver 4                

5 Backup on telephone number 1/IP receiver 1                

6 Backup on telephone number 2/IP receiver 2                

7 Backup on telephone number 3/IP receiver 3                

8 Backup on telephone number 4/IP receiver 4                

= Default

NOTE: Enable only one option from options 5 to 8 (inclusive).

Partition Tamper/Tamper Restore Event Call Direction

Table 45: Description of partition tamper/tamper restore event call direction

Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8

Option Description [3129] [3229] [3329] [3429] [3529] [3629] [3729] [3829]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 Call telephone number 1/IP receiver 1                
2 Call telephone number 2/IP receiver 2                

3 Call telephone number 3/IP receiver 3                

4 Call telephone number 4/IP receiver 4                

5 Backup on telephone number 1/IP receiver 1                

6 Backup on telephone number 2/IP receiver 2                

7 Backup on telephone number 3/IP receiver 3                

8 Backup on telephone number 4/IP receiver 4                

= Default

NOTE: Enable only one option from options 5 to 8 (inclusive).

Special Arming Exit Delay

Worksheet 43: Special Arming Exit Delay Settings
Description Partition 1 Partition 2 Partition 3 Partition 4 Partition 5 Partition 6 Partition 7 Partition 8
(Decimal Values from 000 to 255) Section Data Section Data Section Data Section Data Section Data Section Data Section Data Section Data
Exit delay for special arming; auto arm, BabyWare/
NEWare arming, etc.) [3130] __/__/__ [3230] __/__/__ [3330] __/__/__ [3430] __/__/__ [3530] __/__/__ [3630] __/__/__ [3730] __/__/__ [3830] __/__/__
(Data x 1 sec.; default: 060)

EVOHD Programming Guide • Partition Settings

 EVOHD • Programming Guide

No Movement Schedule
Worksheet 44: No Movement Schedule Settings
Start Time End Time Days of the Week (Turn ON or OFF)
Section Partition # Interval
(From) (To) S M T W T F S H
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3131] 1
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3231] 2
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3331] 3
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3431] 4
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3531] 5
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3631] 6
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3731] 7
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[3831] 8
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8

WARNING: The Start and End Time of a schedule cannot cross over into another day. For example, to program a shift from 10 PM to 6 AM the next morning,
you must program the schedule as follows: Schedule A – start time: 22:00 and end time: 23:59; then program Schedule B – start time: 00:00 and
end time: 06:00. The schedule will not be interrupted between 23:59 and 00:00.

Special Report Codes

Use the following section to program the special and trouble report codes on your EVOHD system. Use worksheet 45, as well as worksheet 46 on page 55
to record your settings.
For Ademco Slow, Silent Knight Fast, Sescoa, Ademco Express, or pager formats, key-in desired two-digit hex value from 00 to FF.

Ademco Format
• Use section [4034] (Special System Report Codes), [4035] (Special Arming/Disarming Report Codes), [4036] (Special Alarm Report Codes), and [4037] (Trouble/
Trouble Restore Report Codes) to program a set of default Ademco report codes, using table 49 (List of automatic report codes), on page 57.
• To program the remaining report codes or change certain defaults, access the individual sections and key-in the desired two-digit hex value, found in table 50
(List of Ademco contact ID report codes), on page 60.

SIA Format
• Use section [4034] (Special System Report Codes), [4035] (Special Arming/Disarming Report Codes), [4036] (Special Alarm Report Codes), and [4037] (Trouble/
Trouble Restore Report Codes) to program a set of SIA report codes, using table 49 (List of automatic report codes), on page 57.
• Codes that have not been set to default can be set as such manually, by entering FF in the appropriate section.
• To disable the reporting of an event, enter 00 in the appropriate section.

Worksheet 45: Special Report Code Settings

Type Section Data Description Type Section Data Description
[3900] ___/___ Power up after total power down [3920] ___/___ Cancel auto-arm
[3901] ___/___ Software reset (watchdog) [3921] ___/___ Quick disarm
[3902] ___/___ Test report [3922] ___/___ PC disarming
[3903] ___/___ Listen-in to follow (request to start session) [3923] ___/___ PC disarming after alarm
[3904] ___/___ BabyWare login request (callback only) [3924] ___/___ Cancel alarm
Special Disarming

[3905] ___/___ BabyWare log off [3925] ___/___ Future use

Special System
Report Codes

Report Codes

[3906] ___/___ Installer in [3926] ___/___ Early to open (see worksheet 41 on page 48)
[3907] ___/___ Installer out [3927] ___/___ Late to open (see worksheet 41 on page 48)
[3908] ___/___ Failed to Arm [3928] ___/___ Remote disarming (ADM2, LSN4)
[3909] ___/___ Future use [3929] ___/___ Future use
[3910] ___/___ Auto-arming [3930] ___/___ Emergency panic
[3911] ___/___ PC arming [3931] ___/___ Auxiliary panic
[3912] ___/___ Late to close (Auto-arming) [3932] ___/___ Fire panic
[3913] ___/___ No movement [3933] ___/___ Recent closing
[3914] ___/___ Partial arming [3934] ___/___ Police code
[3915] ___/___ Quick arming [3935] ___/___ Zone shutdown
Special Arming

Special Alarm
Report Codes

Report Codes

[3916] ___/___ Early to close (see worksheet 40 on page 48) [3936] ___/___ Duress
[3917] ___/___ Late to close (see worksheet 40 on page 48) [3937] ___/___ Keypad lockout
[3918] ___/___ Remote arming (ADM2, LSN4) [3938] ___/___ Voice lockout
[3919] ___/___ Close delinquency [3939] ___/___ Future use

54 | Special Report Codes Version 1.0

EVOHD • Programming Guide

Trouble Report Codes

Worksheet 46: Trouble Report Code Settings
Type Section Data Description Type Section Data Description
[3940] ___/___ TLM trouble [3970] ___/___ TLM restore
___/___ AC failure ___/___ AC failure restore
___/___ Battery failure ___/___ Battery failure restore
___/___ Auxiliary supply ___/___ Auxiliary supply restore
[3941] ___/___ Bell output trouble [3971] ___/___ Bell output trouble restore
___/___ Clock loss ___/___ Clock loss restore
___/___ Fire loop trouble ___/___ Fire loop trouble restore
___/___ Panel Tamper ___/___ Panel tamper restore
[3950] ___/___ Wireless transmitter battery low [3980] ___/___ Wireless transmitter battery low restore
___/___ Wireless transmitter supervision trouble ___/___ Wireless transmitter supervision trouble restore
___/___ Future use ___/___ Future use
___/___ Future use ___/___ Future use
[3951] ___/___ Phone number 1 fail to communicate [3990] ___/___ Combus fault restore
___/___ Phone number 2 fail to communicate ___/___ Module tamper restore
___/___ Phone number 3 fail to communicate ___/___ ROM check error restore
___/___ Phone number 4 fail to communicate ___/___ Module TLM restore
[3960] ___/___ Combus fault [3991] ___/___ Module failure to communicate restore
___/___ Module tamper ___/___ Printer fault restore
___/___ ROM check error ___/___ Module AC failure restore
___/___ Module TLM ___/___ Module battery failure restore
[3961] ___/___ Module failure to communicate [3992] ___/___ Module auxiliary failure restore
___/___ Printer fault ___/___ Module IP Receiver supervision restore
___/___ Module AC failure ___/___ Module IP Receiver fail to communicate restore
___/___ Module battery failure ___/___ Module IP Receiver unregistered restore
[3962] ___/___ Module auxiliary failure [3993] ___/___ Direct light restore
___/___ Module IP Receiver supervision ___/___ Module Rf Interference restore
___/___ Module IP Receiver fail to communicate ___/___ Module low voltage restore
___/___ Module IP Receiver unregistered ___/___ Module self-test error restore
[3963] ___/___ Direct light [3994] ___/___ Module LAN trouble restore
___/___ Module Rf Interference ___/___ Module WAN trouble restore
___/___ Module low voltage ___/___ Future use
Trouble Restore

___/___ Module self-test error ___/___ Future use

Report Codes

Report Codes

[3964] ___/___ Module LAN trouble

___/___ Module WAN trouble
Trouble

___/___ Future use

___/___ Future use

Additional Settings and Modes

The following section provides information on various other settings and modes applicable to your EVOHD system.
Table 46: Description of sections [4000] to [4006]

Section Name Description

After entering section [4000], the keypad will display the eight-digit serial number of the control panel and firmware version. For
Display serial number of
Keypads K641/K641+/K641R/K641LX and K656: use the  and  keys to scroll through the serial number of each module
[4000] control panel and all modules
connected to the combus connected to the combus. The firmware version of some modules will also be displayed. For Grafica Keypads: press the center action
key (Next) to scroll through the serial number of each module on the combus.
[4001] Module reset Reset a module’s programmed contents to its default settings, by entering its serial number.
Locate a specific module (e.g., detector, zone expander, etc.) connected to the combus, by entering the module's serial number. The
[4002] Locate/unlocate module green Locate LED on the module will flash until the serial number is re-entered, or the appropriate Tamper or Unlocate switch is
pressed on the module.
[4003] Module programming mode Enter the serial number of the module you wish to program.
Copy the contents of all programming sections from one module, to one or more modules of the same type.
Enter the serial number of the source module, followed by the serial numbers of the modules you wish to program. To begin
Module broadcast
transferring data, press ACC on the K641/K641+/K641R/K641LX keypads, on the K656 keypad, or the center action key (Start) on
[4004] Grafica keypads.
Copy user, door, and partition labels from the control panel, to all keypads and printer modules connected to the combus. To
Label broadcast transmit the labels, enter 0 0 in section [4004]. From the Destination screen, press ACC on the K641/K641+/K641R/K641LX keypads,
on the K656 keypad, or the center action key (Start) on Grafica keypads.
After entering the section, the control panel will scan all addresses assigned to the modules. If any missing modules are detected
[4005] Quick module scanning (i.e., detector removed from the combus), the control panel will erase the module's serial number, thus removing the module from
the control panel's memory.
After entering the section, the control panel will scan all addresses on the combus. If any missing modules are detected (i.e., detector
[4006] Module scanning removed from the combus), the control panel will erase the module's serial number, thus removing the module from the control
panel's memory. If new modules are detected, the serial number will be entered in the control panel’s memory.

WARNING: The module and label broadcast features will only work when a module is broadcasting its data to a module, or to modules of the same type
and model number.

Version 1.0 Additional Settings and Modes | 55

 EVOHD • Programming Guide

Automatic Report Code Programming

When using contact ID or SIA Reporting formats, default report codes can be programmed automatically. After automatic defaults are set, they can be
changed and remaining report codes can be set manually.

Section Name Description

Resets all codes from sections [0201] - [0296], [0701] - [0832], [2001] - [2199], and [3900] - [3999], to 00; sections
[4030] All report codes reset to 00 [4031] to [4037] reset all the report codes in the following sections, to their default values.
[4031] All report codes reset to FF [0201] to [0296] and [0701] to [0832], [2001] to [2199], and [3900] to [3999]

[4032]
Zone alarm/alarm restore and zone tamper/ [0201 to [0296]
tamper restore
[4033] User/keyswitch arming and disarming [0701] to [0832] and [2001] to [2199]
[4034] Special report codes [3900] to [3909]
[4035] Special arming/disarming report codes [3910] to [3929]
[4036] Special alarm report codes [3930] to [3939]
[4037] Trouble and trouble restore report codes [3940] to [3999]
[4038] Future use
[4039] Sets panel default for EN 50131 compliancy Resets all appropriate sections to be EN 50131 compliant

Software Reset
To set specific software parameters back to their initial, default values, proceed as follows:
1. Enter programming mode (see Entering Programming Mode on page 3 for details).
2. Enter section [4049] to unlock the software reset function.
3. Enter the four-digit section corresponding to the software reset you wish to perform.
If you want to reset more than one section, enter section [4049] to unlock the software reset function once again.
Table 47: Description of software reset sections ([4040] to [4049])

Section Description
[4040] Entering this section will reset all programmable sections, from [0001] to [3999], to their factory default values.
[4041] Entering this section will reset the system master code to 123456.
[4042] Entering this section will reset all zone programming, including sections [0961] to [0984], to their default values.
[4043] Entering this section will reset all access control sections, from [2201] to [2712] (excluding door labels), to their default values.
[4044] Entering this section will reset all user code sections, from [1001] to [1999] and [2001] to [2199], to their default values.
Entering this section will reset programming of all dialer sections ([3051] to [3081]), VDMP3 sections ([3087] to [3098]), and control panel sections ([3020] to
[4045]
[3043] and [3900] to [3991]), to their default values.
[4046] Entering this section will reset all partition sections, from [3101] to [3833] (excluding partition labels), to their default values.
Entering this section will reset programming of all PGM sections ([0901] to [0959]) and all keyswitch sections ([0501] to [0632]), as well as all keyswitch arming/
[4047]
disarming report code sections ([0701] to [0832]), to their default values.
[4048] Entering this section will clear all user labels, door labels, partition labels, module labels, and zone labels, from sections [0301] to [0396].
[4049] Entering this section will unlock software reset for sections [4039] to [4048].

Installer Function Keys

To access the installer functions, press and hold 0, enter the installer code, and then:
• For keypads K641/K641+/K641R/K641LX and K656: press the key indicated in table 48, that corresponds to the function you wish to activate.
• For Grafica keypads: press the center action key (Options), highlight the desired function, and then press the center action key (Ok).
Table 48: Description of installer functions for the K641/K641+/K641R/K641LX and K656 keypads

Function Description K641/K641+/

K641R/ K656
K641LX

Test report Sends the Test Report report code programmed in section [3902], to the monitoring station. STAY STAY

Will dial the PC telephone number programmed in section [3010], to initiate communication with a computer using
Call BabyWare software FORCE SLEEP
the BabyWare software.
Answer BabyWare Will force the control panel to answer a call made by the monitoring station, which is using the BabyWare software.
ARM ARM
software
Cancels all communication with the BabyWare software or with the monitoring station, until the next reportable
Cancel communication event.
DISARM OFF

This mode allows you to perform walk tests, where the bell or siren will squawk to indicate opened zones.
Installer test mode To exit, press MEM (for K641/K641+/K641R/K641LX) or (for K656). Partitions cannot be armed if the installer test MEM
mode is enabled.
Start module scan The keypad will display the serial number of each module on the combus. TRBL

To verify if the combus is supplying sufficient power, press and hold 0, enter the installer code, and press either ACC
Combus voltmeter or , depending on the type of keypad. A reading of 12.3V or lower, at the panel’s service keypad connector, ACC
indicates that the voltage is too low. The voltage may drop during the control panel battery test.

56 | Additional Settings and Modes Version 1.0

EVOHD • Programming Guide

Automatic Report Codes

Table 49: List of automatic report codes

Default Contact ID Report Code Default SIA Report Code

System Event
(when using sections [4032] to [4037]) (when using sections [4032] to [4037])
Arming with master code (##) 3 4A1 Close by user CL Closing report
Arming with user code (##) 3 4A1 Close by user CL Closing report
Arming with keyswitch (##) 3 4A9 Keyswitch close CS Closing keyswitch
Auto arming 3 4A3 Automatic close CA Automatic closing
Arm with PC software 3 4A7 Remote arm/disarm CQ Remote arming
Late to close 3 452 Late to close OT Late to close
No movement 3 452 Late to close NA No movement arming
Partial arming 1 456 Partial arm CG Close area
Quick arming 3 4A8 Quick arm CL Closing report
Remote arm (voice) 3 4A7 Remote arm CQ Arm with voice module
Delinquency closing 1 654 System inactivity CD System inactivity
Disarm with master code (##) 1 4A1 Open by user OP Opening report
Disarm with user code (##) 1 4A1 Open by user OP Opening report
Disarm with keyswitch (##) 1 4A9 Keyswitch open OS Opening keyswitch
Disarm after alarm with master code (##) 1 4A1 Open by user OP Opening report
Disarm after alarm with user code (##) 1 4A1 Open by user OP Opening report
Disarm after alarm with keyswitch (##) 1 4A9 Keyswitch open OS Opening keyswitch
Cancel alarm with master code (##) 1 4A6 Cancel OR Disarm from alarm
Cancel alarm with user code (##) 1 4A6 Cancel OR Disarm from alarm
Cancel alarm with keyswitch (##) 1 4A6 Cancel OS Opening keyswitch
Auto arming cancellation 1 464 Auto-arm time extended CE Closing extend
Cancel alarm with PC software 1 4A6 Cancel OR Disarm from alarm
Voice disarm 1 4A7 Remote arm/disarm OQ Remote disarming
Disarm with PC software 1 4A7 Remote arm/disarm OQ Remote disarming
Disarm after an alarm with PC software 1 4A7 Remote arm/disarm OQ Remote disarming
Quick disarm 1 4A8 Quick disarm OP Opening report
Zone Bypassed (##) 1 57A Zone bypass UB Untyped zone bypass
Zone alarm (##) 1 13A Burglary alarm BA Burglary alarm
Fire alarm (##) 1 11A Fire alarm FA Fire alarm
Early to Disarm by User 1 451 Early to open OK Early to open
Late to Disarm by User 1 452 Late to open OJ Late to open
Failed to arm 1 454 Failed to close CI Failed to close
Zone alarm restore (##) 3 13A Burglary alarm restore BH Burglary alarm restore
Fire alarm restore (##) 3 11A Fire alarm restore FH Fire alarm restore
24-hr Gas alarm (##) 1 13A Burglary alarm GA Gas alarm
24-hr Heat alarm (##) 1 13A Burglary alarm KA Heat alarm
24-hr Water alarm (##) 1 13A Burglary alarm WA Water alarm
24-hr Freeze alarm (##) 1 13A Burglary alarm ZA Freeze alarm
24-hr Gas alarm restore (##) 3 13A Burglary alarm restore GR Gas alarm restore
24-hr Heat alarm restore (##) 3 13A Burglary alarm restore KR Heat alarm restore
24-hr Water alarm restore (##) 3 13A Burglary alarm restore WR Water alarm restore
24-hr Freeze alarm restore (##) 3 13A Burglary alarm restore ZR Freeze alarm restore
Panic 1: emergency 1 12A Panic alarm PA Panic alarm
Panic 2: medical 1 1AA Medical alarm MA Medical alarm
Panic 3: fire 1 115 Pull station FA Fire alarm
Recent closing 3 459 Recent close CR Recent closing
Police code 1 139 Burglary alarm BM Burglary alarm
Global zone shutdown 1 574 Group bypass CG Close area

Version 1.0 Additional Settings and Modes | 57

 EVOHD • Programming Guide

Table 49: List of automatic report codes (Continued)

Default Contact ID Report Code Default SIA Report Code

System Event
(when using sections [4032] to [4037]) (when using sections [4032] to [4037])
Duress alarm 1 121 Duress HA Hold-up alarm
Zone shutdown (##) 1 57A Zone bypass UB Untyped zone bypass
Zone tampered (##) 1 144 Sensor tamper TA Tamper alarm
Zone tamper restore (##) 3 144 Sensor tamper restore TR Tamper restoral
Keypad lockout 1 421 Access denied JA User code tamper
AC failure 1 3A1 AC loss AT AC trouble
Battery failure 1 3A9 Battery test failure YT System battery trouble
Auxiliary supply trouble 1 3AA System trouble YP Power supply trouble
Bell output current limit 1 321 Bell 1 YA Bell fault
Bell absent 1 321 Bell 1 YA Bell fault
Clock lost 1 626 Time/date inaccurate JT Time changed
Fire loop trouble 1 373 Fire trouble FT Fire trouble
Panel tamper 1 144 Sensor tamper TA Tamper alarm
TLM trouble restore 3 351 Telco 1 fault restore LR Phone line restoral
AC failure restore 3 3A1 AC loss restore AR AC restoral
Battery failure restore 3 3A9 Battery test restore YR System battery restoral
Auxiliary supply trouble restore 3 3AA System trouble restore YQ Power supply restored
Bell output current limit restore 3 321 Bell 1 restore YH Bell restored
Bell absent restore 3 321 Bell 1 restore YH Bell restored
Clock programmed 3 625 Time/date reset JT Time changed
Fire loop trouble restore 3 373 Fire trouble restore FJ Fire trouble restore
Panel tamper restore 1 373 Sensor tamper restore FT Tamper restoral
Combus fault 1 333 Expansion module failure ET Expansion trouble
Module tamper 1 145 Expansion module tamper TA Tamper alarm
Module ROM_RAM_error 1 3A4 ROM checksum bad YF Parameter checksum fail
Module TLM trouble 1 352 Telco 2 fault LT Phone line trouble
Module fail to communicate to monitoring station 1 354 Fail to communicate YC Communication fails
Printer fault 1 336 Local printer failure VT Printer trouble
Module AC failure 1 3A1 AC loss AT AC trouble
Module battery failure 1 3A9 Battery test failure YT System battery trouble
Module auxiliary supply trouble 1 3AA System trouble YP Power supply trouble
Module IP receiver supervision - - - -
Module IP receiver fail to communicate - - - -
Module IP receiver unregistered - - - -
Direct light - - - -
Module Rf Interference 1 344 RF receiver Jam XQ RF Jamming
Module low voltage - - - -
Module self-test error - - - -
Module LAN trouble - - - -
Module WAN trouble - - - -
Combus fault restore 3 333 Expansion module failure restore ER Expansion restoral
Panel tamper restore 3144 Sensor tamper restore TR Tamper Restoral
Module tamper restore 3 145 Expansion module tamper restore TR Tamper restoral
Module ROM_RAM_error restore 3 3A4 ROM checksum bad restore YG Parameter changed
Module TLM restore 3 352 Telco 2 fault restore LR Phone line restoral
Early to arm by user 3 451 Early to close CK Early to close
Late to arm by user 3 452 Late to close CJ Late to close
Zone excluded on Force arming 1 57A Zone bypass XW Zone forced
Zone went back to arm status 3 57A Zone bypass restore UU Zone included

58 | Additional Settings and Modes Version 1.0

EVOHD • Programming Guide

Table 49: List of automatic report codes (Continued)

Default Contact ID Report Code Default SIA Report Code

System Event
(when using sections [4032] to [4037]) (when using sections [4032] to [4037])
Printer fault restore 3 336 Local printer failure restore VR Printer restore
Module AC restore 3 3A1 AC loss restore AR AC restoral
Module battery restore 3 3A9 Battery test failure restore YR System battery restoral
Module auxiliary supply restore 3 3AA System trouble restore YQ Power supply restored
Module IP receiver supervision restore - - - -
Module IP receiver fail to communicate restore - - - -
Module IP receiver unregistered restore - - - -
Direct light restore - - - -
Module Rf Interference restore 3 344 RF receiver Jam restore XH RF Jamming restoral
Module low voltage restore - - - -
Module self-test error restore - - - -
Module LAN trouble restore - - - -
Module WAN trouble restore - - - -
Fail to communicate with monitoring station 1 354 Fail to communicate YC Communication fails
Module RF low battery 1 384 RF transmitter low battery XT Transmitter battery trouble
Module RF supervision trouble 1 381 Loss of supervision - RF US Untype zone supervision
Module RF battery restore 3 384 RF transmitter battery restore XR Transmitter battery restoral
Module RF supervision restore 3 381 Supervision restore - RF UR Untyped zone restoral
Cold start 1 3A8 System shutdown RR Power up
Warm start 1 3A5 System reset YW Watchdog reset
Test report engaged 1 6A2 Periodic test report TX Test report
Listen-in request 1 606 Listen-in to follow LF Listen-in to follow
BabyWare login request 1 411 Call back Request RB Remote program begin
PC software communication finished 1 412 Successful - download access RS Remote program success
Installer on site 1 627 Program mode entry LB Local program
Installer programming finished 1 628 Program mode exit LS Local program success
Module fail to communicate restore 3 354 Fail to communicate restore YK Communication restore
Missing PCS module 1 552 Radio transmitter disabled YS Communication trouble
GSM RF jam 1 552 Radio transmitter disabled YS Communication trouble
GSM no service 1 552 Radio transmitter disabled YS Communication trouble
GPRS FTC IPR512 1 354 Fail to communicate YA Communication fails
Missing IP module 1 552 Radio transmitter disabled YS Communication trouble
IP no service 1 552 Radio transmitter disabled YS Communication trouble
IP150 FTC IPR512 1 354 Fail to communicate YA Communication fails
Missing PCS module restore 3 552 Radio transmitter restore YK Communication restore
GSM RF jam restore 3 552 Radio transmitter restore YK Communication restore
GPRS FTC IPR512 restore 3 354 Fail to communicate restore YK Communication restore
Missing IP module restore 3 552 Radio transmitter restore YK Communication restore
IP no service restore 3 552 Radio transmitter restore YK Communication restore
IP150 FTC IPR512 restore 3 354 Fail to communicate restore YK Communication restore

NOTE: Items with a dash “-” indicates there is no report code by default.

Version 1.0 Additional Settings and Modes | 59

 EVOHD • Programming Guide

Contact ID Report
Codes
If using the Ademco contact ID format, enter the two-digit hexadecimal value (under the column heading Value intable 50) to program the desired report codes into
sections [0201] to [0296], [0701] to [0832], [2001] to [2199], and [3900] to [3999].

Table 50: List of Ademco contact ID report codes Table 50: List of Ademco contact ID report codes
Table 50: List of Ademco contact ID report codes
Type CID # Reporting Code Value Type CID # Reporting Code Value
Type CID # Reporting Code Value
150 24-hour non-burglary 25 330 System peripheral 4F
100 Medical alarm 01
Medical Alarms

151 Gas detected 26 331 Polling loop open 50

101 Personal emergency 02
(100)

24-hour Non-burglary
152 Refrigeration 27 332 Polling loop short 51
102 Fail to report in 03

(150 & 160)

153 Loss of heat 28 333 Expansion module failure 52

System Peripheral Troubles

154 Water leakage 29 334 Repeater failure 53
110 Fire Alarm 04
155 Foil break 2A 335 Local printer paper out 54

(330 & 340)

111 Smoke 05
156 Day trouble 2B 336 Local printer failure 55
112 Combustion 06
157 Low bottled gas level 2C 337 Exp. module DC low 56
Fire Alarms

113 Water Flow 07

158 High temperature 2D 338 Exp. module low batt 57
(110)

114 Heat 08
24-hour Non-burglary

159 Low temperature 2E 339 Exp. module reset 58

(150 & 160) (cont.)

115 Pull Station 09

161 Loss of air flow 2F 341 Exp. module tamper 59
116 Duct 0A
162 Carbon monoxide detected 30 342 Exp. module AC lost 5A
117 Flame 0B
343 Exp. module self-test fail 5B
118 Near Alarm 0C
163 Tank level 31 344 RF receiver jam detected 5C
120 Panic alarm 0D
350 Communication 5D
121 Duress 0E 200 Fire supervisory 32
Panic Alarms

351 Telco fault 1 5E

Communication Troubles
122 Silent 0F
(120)

201 Low water pressure 33

352 Telco fault 2 5F
Fire Supervisory

123 Audible 10 202 Low CO2 34

353 Long range radio 60
(200)

(350)
124 Duress - access granted 11 203 Gate valve sensor 35
354 Fail to communicate 61
125 Duress - egress granted 12 204 Low water level 36
355 Loss of radio supervision 62
130 Burglary 13 205 Pump activated 37
356 Loss of central polling 63
131 Perimeter 14 206 Pump failure 38
Long range radio VSWR
132 Interior 15 357 64
300 System trouble 39 problem
133 24-hour 16
Burglar Alarms

301 AC loss 3A 370 Protection loop 65

134 Entry/exit 17
(130)

302 Low system battery 3B 371 Protection loop open 66

Protection Loop Troubles

135 Day/night 18 303 RAM checksum bad 3C 372 Protection loop short 67
136 Outdoor 19 304 ROM checksum bad 3D 373 Fire trouble 68
(370)

137 Tamper 1A
System Troubles

305 System reset 3E 374 Exit error alarm 69

(300 & 310)

138 Near alarm 1B 306 Panel program changed 3F 375 Panic zone trouble 6A
139 Intrusion verifier 1C 307 Self-test failure 40 376 Hold-up zone trouble 6B
140 General alarm 1D 308 System shutdown 41 377 Swinger trouble 6C
141 Polling loop open 1E 309 Battery test failure 42 378 Cross-zone trouble 6D
General Alarms

142 Polling loop short 1F 310 Ground fault 43 380 Sensor trouble 6E
143 Extension module failure 20
(140)

311 Battery missing/dead 44 381 Loss of supervision - RF 6F

144 Sensor tamper 21 312 Power supply over current 45 382 Loss of supervision - RPM 70
145 Expansion module tamper 22 313 Engineer reset 46 383 Sensor tamper 71
146 Silent burglary 23 320 Sounder relay 47 384 RF transmitter low battery 72
147 Sensor supervision failure 24 321 Bell 1 48 385 Smoke detector hi sensitivity 73
Sounder/Relay Troubles

Sensor Troubles
(380 & 390)

322 Bell 2 49 386 Smoke detector low sensitivity 74

323 Alarm relay 4A Intrusion detector hi
(320)

387 75
sensitivity
324 Trouble relay 4B
Intrusion detector low
325 Reversing relay 4C 388 76
sensitivity
326 Notification appliance chk. #3 4D 389 Sensor self-test failure 77
327 Notification appliance chk. #4 4E 391 Sensor watch trouble 78
392 Drift compensation error 79
393 Maintenance alert 7A

60 | Additional Settings and Modes Version 1.0

EVOHD • Programming Guide

Table 50: List of Ademco contact ID report codes Table 50: List of Ademco contact ID report codes Table 50: List of Ademco contact ID report codes

Type CID # Reporting Code Value Type CID # Reporting Code Value Type CID # Reporting Code Value
400 Open/close 7B 520 Sounder/relay disabled A9 601 Manual trigger test BD
401 Open/close by user 7C 521 Bell 1 disable AA 602 Periodic test report BE
402 Group open/close 7D 522 Bell 2 disable AB 603 Periodic RF transmission BF
Open/Close

Sounder Relay Disables

403 Automatic open/close 7E 523 Alarm relay disable AC 604 Fire test C0
(400)

406 Cancel 7F 524 Trouble relay disable AD 605 Status report to follow C1

(520 & 530)

407 Remote arm/disarm 80 525 Reversing relay disable AE 606 Listen-in to follow C2
408 Quick arm 81 Notification appliance chk. #3 607 Walk test mode C3
526 AF
disabled
409 Keyswitch open/close 82 Periodic test - system trouble
608 C4
Notification appliance chk. #4 present
411 Callback request made 83 527 B0
disabled
609 Video xmitter active C5
412 Successful - download access 84
Remote Access

531 Module added B1

611 Point test Ok C6
413 Unsuccessful access 85
(410)

532 Module removed B2

612 Point not tested C7
414 System shutdown 86

(600, 610, 620, 630 & 650)

Communication Disabled 551 Dialer disabled B3
613 Intrusion zone walk tested C8
415 Dialer shutdown 87
614 Fire zone walk tested C9

Test/Misc
416 Successful upload 88
(550)

615 Panic zone walk tested CA

421 Access denied 89
552 Radio transmitter disabled B4
616 Service request CB
422 Access report by user 8A
621 Event log reset CC
423 Forced access 8B
622 Event log 50% full CD
424 Egress denied 8C
570 Zone bypass B5 623 Event log 90% full CE
425 Egress granted 8D
571 Fire bypass B6 624 Event log overflow CF
426 Access door propped open 8E
572 24-hour zone bypass B7 625 Time/date reset D0
Access point door status
(420, 430 & 440)

Bypasses

427 8F
Access Control

573 Burglary bypass B8

(570)

monitor trouble 626 Time/date inaccurate D1

428 Access point request to exit 90 574 Group bypass B9 627 Program mode entry D2
429 Access program mode entry 91 575 Swinger bypass BA 628 Program mode exit D3
430 Access program mode exit 92 576 Access zone shunt BB 629 32-hour event log marker D4
431 Access threat level change 93 577 Access point bypass BC 630 Schedule change D5
432 Access relay/trigger fail 94 631 Exception schedule change D6
433 Access RTE shunt 95 632 Access schedule change D7
434 Access DSM shunt 96 654 System inactivity D8
441 Armed stay 97
442 Keyswitch armed stay 98
450 Exception open/close 99
451 Early open/close 9A
452 Late open/close 9B
453 Failed to open 9C
454 Failed to close 9D
455 Auto-arm failed 9E
Special Troubles

456 Partial arm 9F

(450 & 460)

457 User exit error A0

458 User on premises A1
459 Recent close A2
461 Wrong code entry A3
462 Legal code entry A4
463 Re-arm after alarm A5
464 Auto-arm time extended A6
465 Panic alarm reset A7
466 Service ON/OFF premises A8

Version 1.0 Additional Settings and Modes | 61

 EVOHD • Programming Guide

Keypad Programming
Use the following section to program keypads on your EVOHD system. Use worksheets 47 to 49 to record your settings.

K641/K641+/K641R/K641LX/K656, and TM50

The keypad’s serial number can be found on the keypad’s PC board. It can also be viewed by pressing and holding 0, entering the installer code, and then
accessing section [0000]. The keypad’s firmware version is also displayed in this section. Programming for the TM50 Touch Interface Module is performed
via its touch screen menu interface. For more information on how to program the TM50, refer to the TM50 Menu Programming Guide.
Figure 3: The K641/K641R, K641+, K641LX, K656 and TM50 keypads

K641/K641R K641LX K656 TM50

K641+

Table 51: Description of sections [001] to [006] for the K641/K641+/K641R/K641LX, K656 and TM50 keypads

Section Option Description OFF ON Section Option Description OFF ON

1 Partition 1  Disabled  Enabled 1 Door assigned to partition 1  Disabled  Enabled
   
Keypad Partition Assignment

Assigning Doors to Partitions

2 Partition 2 Disabled Enabled 2 Door assigned to partition 2 Disabled Enabled
3 Partition 3  Disabled  Enabled 3 Door assigned to partition 3  Disabled  Enabled
4 Partition 4  Disabled  Enabled 4 Door assigned to partition 4  Disabled  Enabled
5 Partition 5  Disabled  Enabled 5 Door assigned to partition 5  Disabled  Enabled
Section [001]

Section [002]
6 Partition 6  Disabled  Enabled 6 Door assigned to partition 6  Disabled  Enabled
7 Partition 7  Disabled  Enabled 7 Door assigned to partition 7  Disabled  Enabled
8 Partition 8  Disabled  Enabled 8 Door assigned to partition 8  Disabled  Enabled
1 Display code entry  Disabled  Enabled 1 Mute keypad  Disabled  Enabled


2 Display exit delay  Disabled Enabled 2 Exit delay beep  Disabled  Enabled

3 Display entry delay  Disabled  Enabled 3 Door left open pre-arm*  Disabled  Enabled
Confidential mode (not for UL
4  Disabled  Enabled 4 Chime on zone closure  Disabled  Enabled
installations)
Press
General Options 1

General Options 2

5 Exit confidential mode  Enter code  5 Door left open alarm feedback*  Silent  Audible
button
Section [003]

Section [004]

6 Future use - - - - 6 Door left open alarm follows*  Alarm restore  Beep timer
7 Future use - - - - 7 Door forced alarm*  Silent  Audible
8 Time display option  yy/mm/dd  dd/mm/yy 8 Door forced alarm*  Alarm restore  Beep timer
1 System and clock trouble beep  Disabled  Enabled 1 PGM state**  N.O.  N.C.
Deactivation
2 Communicator trouble beep  Disabled  Enabled 2 PGM deactivation mode**   PGM timer
event
3 Module and combus trouble beep  Disabled  Enabled 3 PGM base time  1 sec.  1 min.
PGM and Tamper Options

4 All zone trouble beep  Disabled  Enabled 4 PGM Override**  Disabled  Enabled
5 Future use - - - - 5 Keypad tamper  Disabled  Enabled
Beep on Trouble
Section [005]

Section [006]

6 Future use - - - - 6 Future use - - - -

7 Time format  24 hr. clock  12 hr. clock 7 Future use - - - -
Audible feedback on access
8  Disabled  Enabled 8 Future use - - - -
request
Card activates door unlocked
1  Disabled  Enabled = Default
schedule
* Section/option is only available on K641R.
2 Door left open alarm  Disabled  Enabled
General Options 3 (K641R only)

** Section/option is only available on K641, K641+, K641LX, and K656.

3 Door forced open alarm  Disabled  Enabled
4 Future use  -  -
5 Keypad tamper  Disabled  Enabled
Section [006]

After After
6 Re-lock door  
opening closing
7 Future use  -  -
8 Unlock on REX  Disabled  Enabled

62 | Keypad Programming Version 1.0

EVOHD • Programming Guide

Worksheet 47: Keypad Settings for Sections [007] to [013]

Section Data Description Default Setting
[007] ___/___/___ (005-255 sec.) Confidential mode timer 120
[008] ___/___/___ (000-255; see option 3 in section [006]) PGM timer 005
[008] ___/___/___ (000-255 sec.) Door unlocked period* 005
[009] ___/___/___ (005-255 sec. added to section [008]) Door unlocked period extension* 015
[010] ___/___/___ (000-255 sec.) Door left open interval* 060
[011] ___/___/___ (000-255 sec.) Door left open pre-alarm timer* 015
[012] ___/___/___ (000-255 sec.) Beep timer for door left open alarm* 005
[013] ___/___/___ (000-255 sec.) Beep timer for door forced open alarm* 005

* Section/option is only available on K641R.

Worksheet 48: Door Unlocked Schedule (K641R only)

Start Time End Time Days of the Week (Turn ON or OFF)
Section Interval
(From) (To) S M T W T F S H
Schedule A ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8
[017]
Schedule B ___ ___ : ___ ___ ___ ___ : ___ ___ 1 2 3 4 5 6 7 8

Table 52: Beeping Assignment Options

Section Option Description OFF ON

1 Partition 1  Mute  Audible
2 Partition 2  Mute  Audible
3 Partition 3  Mute  Audible
Beeping Assignment

4 Partition 4  Mute  Audible

5 Partition 5  Mute  Audible
Section [018]

6 Partition 6  Mute  Audible

7 Partition 7  Mute  Audible
8 Partition 8  Mute  Audible
= Default

Worksheet 49: PGM Activation and Deactivation

Event Group Feature Group Start # End #
Description
Section Data Section Data Section Data Section Data
PGM activation [009] __/__/__ [010] __/__/__ [011] __/__/__ [012] __/__/__
PGM deactivation [013] __/__/__ [014] __/__/__ [015] __/__/__ [016] __/__/__

WARNING: All event groups, except groups 064 to 067, can be used to program the module’s PGM. With the K641LX, all event groups can be used to
program the module’s PGM except group 067. See Programmable Outputs on page 20, for details.
Table 53: Testing Keypad’s PGM Output
Section Description
[020] The keypad’s PGM output will be activated for 8 seconds

Version 1.0 Keypad Programming | 63

 EVOHD • Programming Guide

Wireless Receiver Options

Table 54: Wireless Receiver Options

Section Option Description OFF ON

1 Future use  -  -
2 Check-in supervision  Disabled  Enabled
3 Check-in supervision time interval  24 hours  80 min.
Wireless Receiver Options

4 RF jamming supervision  Disabled  Enabled

5 Future use  -  -
Section [021]

6 Future use  -  -
7 Future use  -  -
Ignores Reports
8 Transmitter tamper signal  
tamper signal tamper signal
= Default

Remote Control Options

Table 55: Remote Control Options

Section Option Description OFF ON

REM2 v2.00 REM2 v2.01
1 REM2 visual and auditory feedback  
and lower and higher
2 Future use  -  -
3 Future use  -  -
Remote Control Options

4 Future use  -  -
5 Future use  -  -
Section [022]

6 Future use  -  -
7 Future use  -  -
8 Future use  -  -
= Default

Viewing Serial Numbers

Table 56: Viewing Serial Numbers
Section Description
[030] Press and hold the transmitter’s anti-tamper switch to view the 6-digit serial number.

Wireless Zone Assignment

Use the following section to program the wireless zones on your EVOHD panel. Use worksheet 50 to record your settings.
Worksheet 50: Wireless Zones
Section Zone # Serial # Section Zone # Serial # Section Zone # Serial #
[101] 1 ___/___/___/___/___/___ [112] 12 ___/___/___/___/___/___ [123] 23 ___/___/___/___/___/___
[102] 2 ___/___/___/___/___/___ [113] 13 ___/___/___/___/___/___ [124] 24 ___/___/___/___/___/___
[103] 3 ___/___/___/___/___/___ [114] 14 ___/___/___/___/___/___ [125] 25 ___/___/___/___/___/___
[104] 4 ___/___/___/___/___/___ [115] 15 ___/___/___/___/___/___ [126] 26 ___/___/___/___/___/___
[105] 5 ___/___/___/___/___/___ [116] 16 ___/___/___/___/___/___ [127] 27 ___/___/___/___/___/___
[106] 6 ___/___/___/___/___/___ [117] 17 ___/___/___/___/___/___ [128] 28 ___/___/___/___/___/___
[107] 7 ___/___/___/___/___/___ [118] 18 ___/___/___/___/___/___ [129] 29 ___/___/___/___/___/___
[108] 8 ___/___/___/___/___/___ [119] 19 ___/___/___/___/___/___ [130] 30 ___/___/___/___/___/___
[109] 9 ___/___/___/___/___/___ [120] 20 ___/___/___/___/___/___ [131] 31 ___/___/___/___/___/___
[110] 10 ___/___/___/___/___/___ [121] 21 ___/___/___/___/___/___ [132] 32 ___/___/___/___/___/___
[111] 11 ___/___/___/___/___/___ [122] 22 ___/___/___/___/___/___
NOTE: When assigning wireless zones, either enter the serial number or press TAMPER/LEARN. To delete the serial number, enter 000000.

64 | Keypad Programming Version 1.0

EVOHD • Programming Guide

Wireless Transmitter Signal Strength

The signal strength test for wireless transmitters is performed in sections [601] to [632]; these sections represent wireless zones 1 to 32, respectively. To
view the signal strength of your various wireless devices, proceed as follows:
1. Enter the zone’s respective section (e.g., for zone 1, enter section [601]).
2. Press the transmitter’s anti-tamper switch and note the number of beeps which are emitted. As shown in table table 57, the number of beeps
correspond to a
preset signal strength range.
Table 57: Signal strength indicator for wireless transmitters

Number of Beeps Signal Strength Result

4 short beeps 4 to 10 Average to strong signal

1 long beep 3 or less Weak signal (relocate)

NOTE: The visual representation of a transmitter’s signal strength is dependent on the type of keypad. For LED keypads, zones 1 through 10 will illuminate,
depending on the signal strength. For instance, a signal strength of 8 will result in zones 1 through 8 to illuminate. For LCD keypads, a ten-level progress bar
composed of arrows will appear, followed by the numeric value. For a signal strength of 8, eight arrows will appear, followed by the number 8.

Current Battery Life

The current battery life for wireless transmitters is viewed in sections [701] to [732]; these sections represent wireless zones 1 to 32, respectively. To test
the wireless transmitter strength of your various wireless devices, proceed as follows:
1. Enter the zone’s respective section (e.g., for zone 1, enter section [701].
2. The current battery life of the wireless transmitter is shown in weeks (e.g., 004= 4 weeks).

Previous Battery Life

The previous battery life for wireless transmitters is viewed in sections [801] to [832]; these sections represent wireless zones 1 to 32, respectively. To view
the wireless transmitter previous battery life, proceed as follows:
1. Enter the zone’s respective section (e.g., for zone 1, enter section [801].
2. The previous battery life of the wireless transmitter is shown in weeks (e.g., 004= 4 weeks).

Wireless PGM Signal Strength

The signal strength for wireless PGMs is visible in sections [671] to [678]; these sections represent PGMs 1 to 8, respectively. To view the signal strength,
proceed as follows:
1. Enter the wireless PGM’s respective section (e.g., for PGM 1, enter section [671].
2. Press the PGM’s anti-tamper switch. As shown in table 58, the number of beeps correspond to a preset signal strength range.
Table 58: Signal strength indicator for wireless PGMs

Number of Beeps Signal Strength Result

4 short beeps 4 to 10 Average to strong signal

1 long beep 3 or less Weak signal (relocate)

Wireless 2WPGM Serial Numbers

Use worksheet 51 to record your settings for 2WPGM serial numbers. To delete a wireless 2WPGM, enter 000000 while in the PGM’s respective section. For
automatic assignment, press the 2WPGM’s anti-tamper switch while in the 2WPGM’s respective section.
Worksheet 51: 2WPGM Serial Numbers
Section 2WPGM # Wireless 2WPGM Serial Number
[901] 2WPGM 1 ___/___/___/___/___/___
[902] 2WPGM 2 ___/___/___/___/___/___
[903] 2WPGM 3 ___/___/___/___/___/___
[904] 2WPGM 4 ___/___/___/___/___/___
[905] 2WPGM 5 ___/___/___/___/___/___
[906] 2WPGM 6 ___/___/___/___/___/___
[907] 2WPGM 7 ___/___/___/___/___/___
[908] 2WPGM 8 ___/___/___/___/___/___

Version 1.0 Keypad Programming | 65

 EVOHD • Programming Guide

Wireless 2WPGM Activation/Deactivation Events

Use worksheet 52 to record your settings for the 2WPGM activation/deactivation events.

Worksheet 52: 2WPGM Activation/Deactivation Events

Section 2WPGM Event Group Section Feature Group Section Start # Section End #
[910] 2WPGM 1 ___/___/___ [911] ___/___/___ [912] ___/___/___ [913] ___/___/___
[920] 2WPGM 2 ___/___/___ [921] ___/___/___ [922] ___/___/___ [923] ___/___/___
[930] 2WPGM 3 ___/___/___ [931] ___/___/___ [932] ___/___/___ [933] ___/___/___
2WPGM [940] 2WPGM 4 ___/___/___ [941] ___/___/___ [942] ___/___/___ [943] ___/___/___
Activation [950] 2WPGM 5 ___/___/___ [951] ___/___/___ [952] ___/___/___ [953] ___/___/___
[960] 2WPGM 6 ___/___/___ [961] ___/___/___ [962] ___/___/___ [963] ___/___/___
[970] 2WPGM 7 ___/___/___ [971] ___/___/___ [972] ___/___/___ [973] ___/___/___
[980] 2WPGM 8 ___/___/___ [981] ___/___/___ [982] ___/___/___ [983] ___/___/___
[914] 2WPGM 1 ___/___/___ [915] ___/___/___ [916] ___/___/___ [917] ___/___/___
[924] 2WPGM 2 ___/___/___ [925] ___/___/___ [926] ___/___/___ [927] ___/___/___
[934] 2WPGM 3 ___/___/___ [935] ___/___/___ [936] ___/___/___ [937] ___/___/___
2WPGM [944] 2WPGM 4 ___/___/___ [945] ___/___/___ [946] ___/___/___ [947] ___/___/___
Deactivation [954] 2WPGM 5 ___/___/___ [955] ___/___/___ [956] ___/___/___ [957] ___/___/___
[964] 2WPGM 6 ___/___/___ [965] ___/___/___ [966] ___/___/___ [967] ___/___/___
[974] 2WPGM 7 ___/___/___ [975] ___/___/___ [976] ___/___/___ [977] ___/___/___
[984] 2WPGM 8 ___/___/___ [985] ___/___/___ [986] ___/___/___ [987] ___/___/___

2WPGM Delays
Use worksheet 53 to record your settings for the 2WPGM delays.
Worksheet 53: 2WPGM Delays
Section 2WPGM Delay Value Range Description Default Setting
[918] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 1 delay 5 sec./min.
[928] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 2 delay 5 sec./min.
[938] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 3 delay 5 sec./min.
[948] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 4 delay 5 sec./min.
[958] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 5 delay 5 sec./min.
[968] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 6 delay 5 sec./min.
[978] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 7 delay 5 sec./min.
[988] ___/___/___ (001 to 255 x 1 sec./min.) 2WPGM 8 delay 5 sec./min.

Partition One-touch Options

Table 59: Partition One-touch Options

PGM 1 PGM 2 PGM 3 PGM 4 PGM 5 PGM 6 PGM 7 PGM 8

Option Description [919] [929] [939] [949] [959] [969] [979] [989]
OFF ON OFF ON OFF ON OFF ON OFF OFF ON ON ON ON ON ON
1 PGM deactivation event after: see table 60                

2 PGM base time (On = min. / Off = sec.)                

3 Future use                

4 Future use                

5 Future use                

6 Future use                

7 Future use                

8 Flexible PGM deactivation: see table 60                

= Default

Table 60: Partition One-touch Options; Options 1 and 8

Option Description
1 8
OFF OFF Deactivation event
OFF ON Deactivation event
ON OFF PGM timer
ON ON PGM timer or deactivation event

Table 61: 2WPGM Tamper/Supervision Trouble

Section Description
[991] The serial number of the 2WPGM that is in tamper trouble will be displayed.
[992] The serial number of the 2WPGM that is in supervision trouble will be displayed.

66 | Keypad Programming Version 1.0

EVOHD • Programming Guide

Label Programming
Each section, from [101] to [148], [200] to [204], and [301] to [396], contains one label with a maximum of 16 characters. These sections contain the
following labels:
• Sections [101] to [148]: zone 01 to zone 48, respectively
• Section [200] = Paradox Security
• Sections [201] to [204]: first area, second area, third area, and fourth area
• Sections [301] to [396]: code 01 to code 96, respectively
After entering the section corresponding to the desired label, the label can be re-programmed to suit your installation needs (see table 62). For example, section
[101] (Zone 01) can be changed to Front Door.

Table 62: Description of the special function keys, used for programming labels on the K641/K641+/K641R/K641LX and K656 keypads

Function Description K641/K641+/

K641R/ K656
K641LX/

Insert space Insert a blank space at the current cursor’s position. STAY STAY

Delete Delete the character or blank space found at the cursor’s current position. FORCE SLEEP

Delete until end of entry Delete all characters and spaces to the right of the cursor, as well as at the cursor’s current position. ARM ARM

Toggle from numeric to alphanumeric keys, and vice versa. Numeric: keys 0 to 9 represent numbers 0 to 9;
Numeric/alphanumeric alphanumeric: refer to table 63.
DISARM OFF

Lower/upper case Toggle from lower to upper case, and vice versa. BYP MENU

After pressing this key, the cursor will turn into a flashing black square. Using the special characters outlined in figure
Special characters , enter the three-digit number for the desired character.
MEM

Table 63: Description of alphanumeric key inputs

Press Key Press Key Press Key

Key
Once Twice Three Times

1 A B C
2 D E F
3 G H I
4 J K L
5 M N O
6 P Q R
7 S T U
8 V W X
9 Y Z

Figure 4: Special characters for label programming.

Version 1.0 Keypad Programming | 67

 EVOHD • Programming Guide

Using the Memory Key

Table 64: Description of memory key sections ([510] to [520])

Section Description

[510] Download all content from the memory key (keypad sections [001] to [396], as well all labels and messages) to the keypad.
[520] Copy the keypad sections [001] to [396], as well as labels and messages to the memory key.

Downloading Content from Memory Key to Keypad

To download content from the memory key to the keypad (refer to figure 5), proceed as follows:
1. Connect the memory key to the connector labelled KEY on the keypad.
2. Enter the keypad’s programming mode, and then access section [510].
3. Wait for two separate confirmation beeps, and then remove the memory key.
Figure 5: Downloading from memory key to keypad and vice-versa.

Downloading from memory Copying from keypad to

key to keypad memory key

Copying Content from Keypad to the Memory Key

To copy content from the memory key to the keypad (refer to figure 5), proceed as follows:
1. Connect memory key to the connector labelled KEY on the keypad. Ensure that the write-protect jumper is ON (refer to figure 6).
2. Enter the keypad’s programming mode, and then access section [520].
3. Wait for two separate confirmation beeps, and then remove the memory key. Remove the memory key’s jumper, so you do not accidentally overwrite
its contents.
Figure 6: The PMC5 Memory Key.

Locked: Overwriting content is not permitted

Unlocked: Copying and downloading content is permitted

Combus Voltmeter
To verify if the combus is supplying sufficient power, press and hold 0, enter the installer code, and press ACC on the K641/K641+/K641R/K641LX and TM50
keypads, or on the K656 keypad. A reading of 10.5V or lower, indicates to a distant module that the voltage is too low. The voltage may drop during the
control panel battery test.

Updating Firmware Using BabyWare

To update your system firmware:
1. Connect the product to your PC, using a 307USB Direct Connect Interface or CV4USB Converter.
NOTE: If you are using the 307USB to upgrade a keypad that features a four-pin serial connector, you must first disconnect the GRN and YEL combus wires.
2. Launch BabyWare.
3. Click the In-Field Programmer icon.
4. Verify the product information located in the In-Field Firmware Programmer window.
5. If the firmware programmer automatically detects your control panel, proceed to the next step. If it does not automatically detect your control panel,
click Com Port Settings and select the correct Com port. Once the correct port has been selected, click the Refresh Product Info button to connect
with the panel.
6. To check for new firmware updates, click Download Firmware from the Web.
7. From the Select Firmware drop-down menu, select the firmware version you wish to install. If you have already downloaded the PUF file from
paradox.com, click [...], and then select your PUF file from the appropriate location.
8. Click Update Product Firmware. When the download process comes to an end, the update is complete.

68 | Keypad Programming Version 1.0

EVOHD • Programming Guide

The following section provides information on certain hardware connections for your EVOHD control panel. For detailed information, including
connection diagrams, refer to the EVOHD Installation Guide. The installation guide is available from paradox.com.
Table 65: Milliamp reference table for different wire gauges

Length Available Length Available Length Available Length Available

Wire Wire Wire Wire
(of each run of Milliamps (of each run of Milliamps (of each run of Milliamps (of each run of Milliamps
Gauge Gauge Gauge Gauge
wire) (mA) wire) (mA) wire) (mA) wire) (mA)
30 m (100 ft.) 2000 30 m (100 ft.) 2000 30 m (100 ft.) 1382 30m (100 ft.) 869
61 m (200 ft.) 2000 61 m (200 ft.) 1718 61 m (200 ft.) 680 61m (200 ft.) 427
91 m (300 ft.) 1831 91 m (300 ft.) 1151 91 m (300 ft.) 456 91m (300 ft.) 286
122 m (400 ft.) 1366 122 m (400 ft.) 859 122 m (400 ft.) 340 122m (400 ft.) 214
152 m (500 ft.) 1096 152 m (500 ft.) 689 152 m (500 ft.) 273 152m (500 ft.) 171
183 m (600 ft.) 910 183 m (600 ft.) 573 183 m (600 ft.) 227 183m (600 ft.) 142
213 m (700 ft.) 782 213 m (700 ft.) 492 213 m (700 ft.) 195
244 m (800 ft.) 683 244 m (800 ft.) 429 244 m (800 ft.) 170
274 m (900 ft.) 608 274 m (900 ft.) 382 274 m (900 ft.) 151
(Surface: 1.039 sq. mm)

(Surface: 0.823 sq. mm)

(Surface: 0.326 sq. mm)

(Surface: 0.205 sq. mm)

305 m (1000 ft.) 546 305 m (1000 ft.) 344 305 m (1000 ft.) 136
457 m (1500 ft.) 365 457 m (1500 ft.) 229
610 m (2000 ft.) 273 610 m (2000 ft.) 172
18 AWG

22 AWG

24 AWG
16AWG

762 m (2500 ft.) 219 762 m (2500 ft.) 138

914 m (3000 ft.) 182 914 m (3000 ft.) 115

Milliamp Consumption
Using worksheet 54 on page 69, proceed as follows:
1. Calculate the total number of milliamps (mA) required by each device, module, and accessory in your EVOHD system. Make sure to take into account
devices connected to the control panel’s PGM outputs. Since the bell output has its own power supply, do not include the sirens which are connected
to it in your
calculation.
2. If the grand total is less than 2000 mA, proceed to step 3. If the value is greater, an external power supply will be required to provide the additional
power needed.
3. Due to the degradation of a power signal over long distances (if such is the case, the PS17 Paradox Power Supply Module is recommended), each
length (or run) of wire in the system can support only a specific number of milliamps (mA). Using table 65, determine how many milliamps each run
of wire can support.
NOTE: The total number of milliamps (mA) can never surpass 2000 mA.
Worksheet 54: Milliamp Consumption of Various Devices
Consumption for Total
Device QTY
Each (mA)
Communicator Module(PCS250/G) __________ x 450 mA __________
Grafica Color LCD Keypad (K07C) __________ x 130 mA __________
LCD keypads (K641, K641+, K656, K641LX) __________ x 110 mA __________
LCD keypads with built-in reader (K641R) __________ x 120 mA __________
Motion detector modules (DG85, DM50/60/70) __________ x 30 mA __________
Door contact modules (ZC1) __________ x 15 mA __________
1-Zone expansion modules (ZX1) __________ x 30 mA __________
4-Zone expansion modules (ZX4) __________ x 30 mA __________
8-Zone expansion modules (ZX8) __________ x 30 mA __________
8-Zone expansion modules (ZX8D) __________ x 60 mA __________
16-Zone expansion modules (ZX16D) __________ x 70 mA __________
32-Zone expansion modules (ZX32D) __________ x 176 mA __________
TM50 __________ x 200 mA __________
DG457 __________ x 35 mA __________
DG467 __________ x 35 mA __________
HD77 PIR __________ x 330 mA __________
Magellan wireless expansion modules (RTX3) __________ x 35 mA __________
4-PGM expansion modules (PGM4) __________ x 150 mA __________
Printer modules (PRT3) __________ x 25 mA __________
DVACS modules (DVAC) __________ x 40 mA __________

Version 1.0 Keypad Programming | 69

 EVOHD • Programming Guide

Worksheet 54: Milliamp Consumption of Various Devices

Consumption for Total
Device QTY
Each (mA)
Annunciator modules (ANC1) __________ x 20 mA __________
InTouch voice-assisted arm/disarm modules (ADM2) __________ x 105 mA __________
Hub and bus isolator (HUB2) __________ x 50 mA __________
Hub and bus isolator (HUB4D) __________ x 73 mA __________
Access control module (ACM12)
(The ACM12 consumes 130mA from its own power supply and cannot be powered by the combus; the
ACM11 consumes 120mA when connected to the combus for power) __________ x 120 mA __________
Listen-in module (LSN4) __________ x 60 mA __________
Internet module (IP150) __________ x 110 mA __________
Plug-in voice module (VDMP3) __________ x 35 mA __________
Other devices such as hardwired motion detectors __________ __________

Grand Total
(The maximum available milliamps is 2000 mA) __________

Connecting the Combus in Noisy Environments

When installing the combus wires in proximity to high electrical interference, such as neon lights, motors, high-voltage wiring, and transformers, or if
connecting the combus across separate buildings, you must use shielded cables. Connect the shielded cable as follows:
• Within the same building: strip the outer jacket at one end of the shielded cable to expose the shield. Connect the shield to the control panel ground (not the
dialer ground), while leaving the shield at the other end of the cable open (floating).
• Across separate buildings: strip the outer jacket at one end of the shielded cable to expose the shield. In the same building that houses the control panel,
connect the exposed shield to a cold water pipe or any other earth ground available, while leaving the shield at the other end of the cable open (floating). The
same configuration applies to any subsequent building.

70 | Keypad Programming Version 1.0

EVOHD • Programming Guide

Trouble Display
The following section provides information on the different trouble groups associated with your EVOHD control panel.

K641/K641+/K641R/K641LX
To view the trouble display on the K641/K641+/K641R/K641LX and K648 keypads:
1. Press TRBL.
2. To view the specific trouble: For K641/K641+/K641R/K641LX, press the trouble’s corresponding number key and use the  and  keys.

K656
To view the trouble display on the K656 keypad:
1. Press MENU.
2. Press 5 or scroll to the View Trouble sub-menu using the  and  keys, and then press ENTER.
3. Press the trouble’s corresponding number key and use the  and  keys to view the specific trouble.

Grafica
To view the trouble display on Grafica keypads:
1. Enter your access code.
2. Using the scroll keys, highlight Trouble and then press the center action key (Ok). The troubles will appear by trouble group. If more than one trouble
group appears, highlight the desired group before pressing the center action key (View), to view the specific trouble.

Trouble Groups
Table 66: Trouble groups for the EVOHD system

Group # Description Group # Description Group # Description Group # Description

1 AC failure 1 TLM1 1 Module tamper 1 Missing keypad
Module ROM check
2 Battery failure 2 Fail to Com. 1 2 2 Missing module
error
3 Aux. current limit 3 Fail to Com. 2 3 Module TLM trouble 3 Missing voice module
4 Bell current limit 4 Fail to Com. 3 4 Module Fail to Com. 6 General failure
5 Bell absent 5 Fail to Com. 4 5 Printer trouble 7 Combus overload
6 ROM check error 6 Fail to Com. PC 6 Module AC failure

4: Network (Combus) Troubles

7 RAM check error 7 Module battery failure
8 Panel Tamper 8 Module supply output
3: Module Trouble
2: Communicator

Module IP Receiver
1: System

9
Supervision trouble
Module IP Receiver Fail
10
to com.
Module IP Receiver
11
unregistered
12 Direct light
13 Module RF Interference
Low bus voltage on
14
module
15 Module Self-test failure
16 Module LAN failure
17 Module WAN failure

Group Description Group Description Group Description Group Description

5: Zone Tamper

7: Zone Fault

8: Clock Loss
Low Battery
6: Zone

Press 6 to display the zone(s) Press 7 to display the zone(s)

Press 5 to display the tampered
assigned to wireless devices with experiencing a communication, Press 8 to re-program the time
zone or zones
low batteries a fire loop, or CleanMe™ trouble.

Version 1.0 Trouble Display | 71

 EVOHD • Programming Guide

Table 66: Trouble groups for the EVOHD system

Group # Description Group # Description Group # Description Group # Description

Press [STAY] to display
zone(s) with zone anti-
1 Missing GSM module 1 Missing IP module 1
masking detected
(anti-mask trouble).
2 PCS Module Tamper 2 No service
GSM RF jam Fail to communicate

11: Zone anti-mask Trouble

3 3
supervision with IP receiver 1
9: GSM Troubles

10: IP Troubles
Fail to communicate
4 No service 4
with IP receiver 2
Fail to communicate Fail to communicate
5 5
with IP receiver 1 with IP receiver 3
Fail to communicate Fail to communicate
6 6
with IP receiver 2 with IP receiver 4
Fail to communicate
7 7 IP receiver unregistered
with IP receiver 3
Fail to communicate
8
with IP receiver 4
9 IP receiver unregistered

72 | Trouble Display Version 1.0

EVOHD • Programming Guide

Appendix A
EN 50131 Programming
The following sections describe all the programming required for your panel to be EN 50131 compliant. To set your panel to be EN 50131 compliant:
1. Enter section [4049] to unlock the software.
2. 2. Enter section [4039] to set all relevant sections to EN 50131-compliant default settings.
NOTE: 1. If a permanent record of events is desired, “automatic Event Buffer Transmission’ needs to be configured; see section [3037] for more details.
2. Confidential mode needs to be activated when using the TM50.

PCS Module Programming (EN 50131 Compliancy)

Table 67: PCS module programming section [2950] (EN 50131 Compliancy)

Section Option Description OFF ON

1 GSM reporting  See PCS manual  See PCS manual
2 GSM reporting  See PCS manual  See PCS manual
PCS Module Programming

3 Future use - - - -
4 Future use - - - -
Section [2950]

5 - -
GSM/GPRS no service supervision See table 68 See table 68
6 - -
7 GSM/GPRS module tamper  Disabled  Enabled
8 GSM/GPRS RF jamming supervision  Disabled  Enabled

Table 68: GSM/GPRS no service supervision (option 5 and 6 for section [2950] above) EN 50131 Compliancy

Option Description
5 6
OFF OFF Disabled
ON OFF When disarmed: trouble only; when armed: audible only
OFF ON When disarmed: trouble only; when armed: audible only
ON ON Silent alarm becomes audible alarm

Control Panel Settings

The following are the sections relevant to EN 50131 compliancy.
Table 69: Control Panel Settings (EN 50131 Compliancy)
Default
Section Data Description
Setting
[3021] __/__/__ Trouble shutdown (00-15) 010

Table 70: Panic Shutdown (EN 50131 Compliancy)

Default
Section Data Description
Setting
[3023] __/__/__ Panic shutdown (0-255) 010

System Options (EN 50131 Compliancy)

Use the following section to program systems options on your EVOHD system. The following provides information on sections [3029] through [3035].

Table 71: Description of section [3028]

Section Option Description OFF ON

1 Panel Tamper  Disabled  Enabled
Auto-detect
2 Modem speed  300 bps 
(300/1200 bps)
PCS Module Programming

3 Future use  Disabled  Enabled

4 Future use  Disabled  Enabled

Section [3028]

5 Future use Disabled  Enabled

6 Future use  Disabled  Enabled
7 Future use  Disabled  Enabled
8 Restrict arming on fail to communicate  Disabled  Enabled

Version 1.0 Appendix A | 73

 EVOHD • Programming Guide

Table 72: Description of section [3029]

Section Option Description OFF ON

1 Enable if using an RTX3 without an K641 / K641R / K641LX  Disabled  Enabled
2 Future use  Disabled  Enabled
PCS Module Programming

3 Future use  Disabled  Enabled

4 EN 50131 compliant mode  Disabled  Enabled

Section [3029]

5 
Anti-mask supervision See table 73 See table 73
6  

7 Generate anti-mask trouble if detected on bypass zone  Yes  No

8 Restrict arming on Anti-mask trouble  Disabled  Enabled

Table 73: Anti-mask supervision (option 5 and 6 for section [3029] (EN 50131 Compliancy)

Option Description
5 6
OFF OFF Disabled
OFF ON Generates trouble only (when armed or disarmed)
When armed: alarm (default)
ON OFF
When disarmed: generates trouble only
When armed: alarm
ON ON
When disarmed: generates audible alarm

Table 74: Description of section [3033] (EN 50131 Compliancy)

Section Option Description OFF ON

1 Multiple actions in user menu  Disabled  Enabled
2 User code length  Fixed  Flexible
3 User code length (if option 2 is OFF)*  4-digits  6-digits
4 Power save mode  Disabled  Enabled
System Options 3


Section [3033]

5 Bypass not displayed if system is armed  Disabled Enabled

6 Trouble latch  Disabled  Enabled
7 EOL resistor on hardwire zones  Disabled  Enabled
8 Zone doubling (ATZ)  Disabled  Enabled
* ALL numbers from 000000 to 999999 are valid giving a total of 1,000,000 different possible combinations.

Table 75: Description of section [3034] (EN 50131 Compliancy)

Section Option Description OFF ON

1 - -
Wireless transmitter supervision See table 76 See table 76
2 - -
Generate supervision failure if detected on a bypass wireless
3  Yes  No
zone
4 Restrict arming on a wireless transmitter supervision failure  Disabled  Enabled
System Options 4
Section [3034]

5 - -
Zone and module tamper recognition options See table 77 See table 77
6 - -
7 Generate tamper if detected on bypass zone  Yes  No
8 Restrict arming on tamper trouble  Disabled  Enabled

Table 76: Wireless transmitter supervision (options 1 and 2 for section [3034] (EN 50131 Compliancy)

Option Description
1 2
OFF OFF Disabled (default)
OFF ON Generates trouble only (when armed or disarmed)
When armed: alarm (default)
ON OFF
When disarmed: generates trouble only
When armed: alarm
ON ON
When disarmed: generates audible alarm

74 | Appendix A Version 1.0

EVOHD • Programming Guide

Table 77: Zone and module tamper recognition (option 5 and 6 for section [3034] (EN 50131 Compliancy)

Option Description
5 6
OFF OFF Disabled
OFF ON Generates trouble only (when armed or disarmed)
When armed: alarm (default)
ON OFF
When disarmed: generates trouble only
When armed: alarm
ON ON
When disarmed: generates audible alarm

Table 78: Description of section [3035] (EN 50131 Compliancy)

Section Option Description OFF ON

1 Restrict arming on AC failure  Disabled  Enabled
2 Restrict arming on battery failure  Disabled  Enabled
3 Restrict arming on bell or auxiliary failure  Disabled  Enabled
4 Restrict arming on TLM failure  Disabled  Enabled
System Options 5


Section [3035]

5 Restrict arming on module troubles  Disabled Enabled

6 Account number transmission  Partition #  Tel. No.
7 Transmit zone status on serial port*  Disabled  No
8 Future use  Disabled  Enabled
*This option is used by certain event monitoring software, such as Hyperterminal. With WinLoad/BabyWare and printers, it is always
being transmitted.

Table 79: Description of section [3037] (EN 50131 Compliancy)

Section Option Description OFF ON

1 Call back  Disabled  Enabled
2 Automatic event buffer transmission  Disabled  Enabled
3 - -
Autotest report transmission options See table 80 See table 80
4 - -
5 Keypad beep on successful arming/disarming report  Disabled  Enabled
System Options 4

6 Alternate dialing  Disabled  Enabled

Section [3037]

7 Dial tone delay (if no dial tone)  Disabled  Enabled

Report zone restore
8 ON = Upon zone closure  Disabled  Enabled
OFF = Upon bell cut-off

Table 80: Test report transmission (option 3 and 4) for section [3037]) (EN 50131 Compliancy)

Option Description
3 4
OFF OFF Transmit the test report code every time the days programmed in section [3040] have elapsed, at the time programmed in section [3041]; (default)
When armed: transmit test report code every time the time programmed in section [3042] has elapsed
OFF ON
When disarmed: transmit test report code every time the time programed in section [3043] has elapsed
The control panel will transmit the test report code every hour, on the minute value programmed in section [3041] (the last two digits); the first tow
ON OFF digits of section [3041] will be ignored; for example, if 10:25 was programed in section [3041], the test report code would be transmitted at the 25th
minute of every hour; i.e., 11:25, 12:25, etc.
The test report code will be transmitted when one or more of the conditions of the second and third options, listed above, are met;
ON ON
i.e., option 3 = OFF and option 4 = ON, or option 3 = ON and option 4 = OFF

Version 1.0 Appendix A | 75

 EVOHD • Programming Guide

Partition Timers
Table 81: Partition Timer Settings (EN 50131 Compliancy)
Description Partition 1 Partition 2 Partition 3 Partition 4
(Decimal Values from 000 to 255) Section Data Section Data Section Data Section Data
Number of invalid codes before lockout
[3105] __/__/__ [3205] __/__/__ [3305] __/__/__ [3405] __/__/__
(Default: 010)
Keypad lockout duration
[3106] __/__/__ [3206] __/__/__ [3306] __/__/__ [3406] __/__/__
(Default: 02)
Auto-zone shutdown
[3114] __/__/__ [3214] __/__/__ [3314] __/__/__ [3414] __/__/__
(Default: 010)

Description Partition 5 Partition 6 Partition 7 Partition 8

(Decimal Values from 000 to 255) Section Data Section Data Section Data Section Data
Number of invalid codes before lockout
[3505] __/__/__ [3605] __/__/__ [3705] __/__/__ [3805] __/__/__
(Default: 010)
Keypad lockout duration
[3506] __/__/__ [3606] __/__/__ [3706] __/__/__ [3806] __/__/__
(Default: 02)
Auto-zone shutdown
[3514] __/__/__ [3614] __/__/__ [3714] __/__/__ [3814] __/__/__
(Default: 010)

76 | Version 1.0
EVOHD • Programming Guide

Appendix B
EOL and ATZ Options per Zone Input and Tamper Options per Zone

EOL/ATZ Options per Zone Input

EVOHD v1.0 supports the use of EOL and ATZ per zone input. Previously, all inputs followed global EOL/ATZ settings at panel section [3033], options 7 and
8. To set EOL and ATZ options per individual input, a new module and panel section ([401] and [0401], respectively) has been added.

To access module section [401]:

1. Enter panel section [4003].
2. Enter the module’s serial number.
3. Enter module section [401] (see table 82). Each of the 8 digits represent one of the 8 inputs.
Table 82: Zone Input Options
Section Input 1 / Input 2 Input 3 / Input 4 Input 5 / Input 6 Input 7 / Input 8
[0401] _/_ _/_ _/_ _/_
Zone Input Options (0/0) (0/0) (0/0) (0/0)

By default, all options are configured as “0”. This means that all zone inputs will follow the global setting at panel section [3033], options 7 and 8. However,
if you change the value from 1 to 4, the inputs will follow the desired settings (see table 83).:
Table 83: Zone Input Option Individual Settings

Option Description
0 System default; zone will follow global panel settings for EOL and ATZ set in section [3033], options 7 and 8.
1 No EOL, no ATZ
2 EOL enabled, no ATZ
3 No EOL, ATZ enabled
4 EOL enabled, ATZ enabled

The example of (12) (03) (00) (00) configured in section [401] means that:
- The first digit shows that input 1 uses no EOL and no ATZ.
- The second digit shows that input 2 has EOL enabled, but no ATZ.
- The third digit shows that input 3 follows the global setting in panel section [3033].
- The fourth digit shows that input 4 has EOL and ATZ enabled (input 12 becomes the second input for a second zone).
NOTE: 1. When a zone is programmed as a “Fire” or “Delay Fire”, the setting from [401] is not used and the input needs to be wired like a fire zone (1K resistor in
parallel). 2. When a zone is programmed as a “Keyswitch”, the input needs to be wired like a Keyswitch (1K resistor in parallel).

Version 1.0 Appendix B | 77

 EVOHD • Programming Guide

Tamper Options per Zone

EVOHD v1.0 supports tamper options for a particular zone. In the new panel section [0400], a new section allows for the disabling of the global Tamper
setting. A display of eight options is shown, and only the first option is used (see figure 7):
Figure 7: Zone (New Option Screen)

To disable the Tamper option on a particular zone:

1. Enter section [0400] (the global Tamper option must be enabled in section [3033], options 5 and 6).
2. Select the zone you wish to modify.
3. After the zone option screen, a new option screen appears (see figure 7).
4. The “1” in the first option signifies that the zone follows the global Tamper setting (default). Press “1” to remove this option and to disable the tamper
option on the particular zone. This zone will now not send any tamper troubles or alarms.

Selectable Input Resistor for EOL and Contact

Selectable Input Resistor

EVOHD v1.0 provides the ability to select different resistor values for the EOL and the resistor in parallel of the zone contact. To set selectable input resistor
for EOL, a new module (ZX8 v6.0 or higher) and panel section ([402] and [0402], respectively) has been added.

To access module section [402]:

1. Enter panel section [4003].
2. Enter the module’s serial number.
3. Enter module section [402] (see table 84). Each of the 8 digits represent one of the 8 inputs.
Table 84: Zone Input Options
Section Input 1 / Input 2 Input 3 / Input 4 Input 5 / Input 6 Input 7 / Input 8
[0402] _/_ _/_ _/_ _/_
Zone Input Options (0/0) (0/0) (0/0) (0/0)

Table 85: Zone Input Option Individual Settings

Option EOL Value Zone A Value Zone B Value (ATZ)

0 1K 1K 2K2
1 2K2 1K5 N/A
2 3K3 3K3 N/A
3 4K7 4K7 N/A
4 4K7 6K8 N/A
5 2K2 4K7 N/A
6 8K2 8K2 N/A

Figure 8: Selectable input Resistor for EOL

Zone
input COM

EOL Zone A Zone B (ATZ)

value

TAMPER N.C. TAMPER N.C.

78 | Appendix B Version 1.0

The whole Paradox team wishes you a successful and easy installation.
We hope this product performs to your complete satisfaction.
Should you have any questions or comments, please contact us.

For support, please contact your local distributor, or dial +1-450-491-7444,

Monday to Friday, from 8:00 a.m. to 5:00 p.m. EST.
You may also e-mail us at [email protected].
Additional information can be found at PARADOX.COM

EVOHD-EP02

Printed in Canada www.paradox.com