1/12/24, 11:52 AM Autodesk Inventor Basics | Quizizz

Worksheets Name

Total questions: 0 Class

Worksheet time: 0secs

1. Which of the four Inventor Base environments and file extension names is .idw?

a) Part b) Drawing

c) Presentation d) Assembly

2. What tool could you use to add depth to a created sketch?

a) Line b) Extrude

c) Rectangle d) Circle

3. When a 2D sketch is completed, which button do you click to exit sketch mode?

a) Exit b) Finish Sketch

c) Extrude d) Revolve

4. In Autodesk Inventor, which tools can you use to view your design from any angle?

a) Revolve b) View Cube

c) Orbit d) Finish Sketch

5. What should you press if you want to exit a command in Inventor?

a) Exit b) Escape

c) Delete d) Enter

6. Which file type is used to create a new part?

a) Standard.idw b) Standard.iam

c) Standard.ipn d) Standard.ipt

https://quizizz.com/print/quiz/5da73e490f0d400021ba3c77 1/4
1/12/24, 11:52 AM Autodesk Inventor Basics | Quizizz

7. To switch to the isometric/home view of a model quickly, press the __________ key on the keyboard.

a) F8 b) F6

c) F7 d) F9

8. Which navigation tool allows for lateral movement (left, right, up, or down) within the graphics
window?

a) scale b) zoom

c) rotate d) pan

9. Which of the following are 2D commands

a) Line b) Circle

c) Hole d) Extrude

e) Slot

10. The purpose of the middle mouse button or wheel is to ___________.

a) select points, navigation menus, and enter b) change the drawing magnification and move
commands. around the drawing.

c) serve as an alternative to the ENTER key. d) bring up additional options.

11.

What does the label #2 represent

a) Navigation Bar b) Home View

c) ViewCube

https://quizizz.com/print/quiz/5da73e490f0d400021ba3c77 2/4
1/12/24, 11:52 AM Autodesk Inventor Basics | Quizizz

12.

What is the definition of a "constraint" in inventor?

a) The limits and restrictions a designer must b) Restrictions and associations that are applied
consider at the beginning of a project to 2D geometry (shapes, points, lines) to
make them line up or connect in a certain
way

c) Devices that keep a person from moving d) Specifications for the size of a design, 2D or
3D

13.

What does the label #3 represent

a) ViewCube b) Home View

c) Navigation Bar

14. The constraint that forces two selected lines or curves to lie at right angles to one another is
___________.

a) parallel b) coincident

c) vertical d) perpendicular

15. Autodesk Inventor software's primary purpose is?

a) Designing 3D House Plans b) Designing 3D Mechanical Parts

c) Designing 2D Mechanical Parts d) Designing 2 D House Plans

https://quizizz.com/print/quiz/5da73e490f0d400021ba3c77 3/4
1/12/24, 11:52 AM Autodesk Inventor Basics | Quizizz

16. What must you do first before you can create a 3D object?

a) none of the above b) create 2D sketch

c) type in measurement d) click extrude

17. The constraint that forces endpoints to aligned with other geometric elements.

a) coincident b) concentric

c) colinear d) parallel

18.

What is the feature of the user interface highlighted in this picture?

a) Quick Access Tool Bar b) Ribbon

c) Graphics Window d) Browser

19.

What is the feature of the user interface highlighted in this picture?

a) Graphics Window b) Ribbon

c) Quick Access Tool Bar d) Browser

20. The area that allows you to show, hide, and work with selected features is the ______________.

a) ribbon b) part browser

c) 2D sketch panel d) status bar

https://quizizz.com/print/quiz/5da73e490f0d400021ba3c77 4/4