VEHICLE POLLUTION MONITORING, CONTROL AND CHALLAN

SYSTEM BASED ON INTERNET OF THINGS

A MINOR/MAJOR PROJECT REPORT SUBMITTED IN THE PARTIAL
FULFILLMENT OF
REQUIREMENT FOR THE AWARD OF DEGREE OF

BACHELOR OF ENGINEERING
IN
MECHANICAL ENGINEERING

SUBMITTED TO
RAJIV GANDHI PROUDYOGIKI VISHWAVIDYALAYA
BHOPAL (M.P.)

SUBMITTED BY

Mohammed Ayan (0103ME201031)

Name

UNDER THE GUIDANCE OF

XYZ
(Designation of Guide)

DEPARTMENT OF MECHANICAL ENGINEERING

LAKSHMI NARAIN COLLEGE OF TECHNOLOGY
BHOPAL (M.P.)
 LAKSHMI NARAIN COLLEGE OF TECHNOLOGY BHOPAL
(M.P.)

CANDIDATE’S DECLARATION

I hereby declare that this Minor Project Report entitled “VEHICLE POLLUTION
MONITORING, CONTROL AND CHALLAN SYSTEM BASED ON INTERNET OF THINGS

” is my own work conducted under the supervision of Guide Name (Designation)

of Mechanical Engineering Department, Lakshmi Narain College of Technology,
Bhopal, M.P.

I further declare that to the best of my knowledge and belief that this report does
not contain any part of work that has been submitted for the award of any degree
either in this university or in any other university/Deemed university without
proper citation.

Mohammed Ayan (0103ME201031)

I
 LAKSHMI NARAIN COLLEGE OF TECHNOLOGY BHOPAL
(M.P.)

CERTIFICATE

This is to certify that the Minor Project Report entitled “VEHICLE POLLUTION
MONITORING, CONTROL AND CHALLAN SYSTEM BASED ON INTERNET OF THINGS ” is the
bonafide project work carried out independently by Mohammed Ayan , student of
Bachelor of Engineering in Mechanical Engineering from Rajiv Gandhi
Proudyogiki Vishwavidyalaya, Bhopal for the partial fulfillment of the requirement
for the award of the degree of Bachelor of Engineering and this report has not
formed previously the basis for the award of any degree, diploma or any other
similar title according to our knowledge.

Guided By: Approved By:

XYZ Dr. Neeraj Dubey

(Designation) (Head of the Department)
Mechanical Engineering Department Mechanical Engineering Department
LNCT, Bhopal (M.P.) LNCT, Bhopal (M.P.)

III
 LAKSHMI NARAIN COLLEGE OF TECHNOLOGY BHOPAL
(M.P.)

APPROVAL CERTIFICATE

This Minor Project work entitled “VEHICLE POLLUTION MONITORING, CONTROL

AND CHALLAN SYSTEM BASED ON INTERNET OF THINGS ” being submitted by
Mohammed Ayan (0103ME201031) has been examined by us and is hereby
approved for the award of degree of Bachelor of Engineering in Mechanical
Engineering which has been submitted to Rajiv Gandhi Proudyogiki
Vishwavidyalaya, Bhopal (M.P.).

Examiner
Date:

V
 LAKSHMI NARAIN COLLEGE OF TECHNOLOGY BHOPAL
(M.P.)

ACKNOWLEDGEMENT

Completing a task is never a one-man effort. It is often the result of valuable contribution of a
number of individuals, in direct or indirect manner that help in shaping and achieving an
objective. This acknowledgement is nothing but a small token of gratitude in recognition of their
help in this endeavor.

It is my great pleasure to record profound gratitude to my supervisor, Name of Guide,

Designation, Department of Mechanical Engineering, LNCT, Bhopal for his constant inspiration
and invaluable guidance throughout the course of investigation.

I am extremely thankful to Dr. Kailash Shrivastava, Principal, Dr. Ashok Kumar Rai, Dean of
Administration & OSD, Dr. Shailendra Dwivedi, Professor & Head (Mechanical Engineering),
and all the faculty members of Department of Mechanical Engineering, LNCT Bhopal for
providing all the facilities, help and encouragement for carrying out the project work
successfully.

Finally, I owe entire of my academic achievements to my parents who have tremendously

encouraged me throughout my academic career as well as whole life.

Before all and after all the man thanks should be to the Almighty God.

Mohammed Ayan
(0103ME201031)
5thSemester

VII
 CONTENTS

CANDIDATE’S DECLARATION I
CERTIFICATE III
APPROVAL CERTIFICATE V
ACKNOWLEDGEMENT VII
CONTENTS IX
ABSTRACT XIII

CHAPTER 1.INTRODUCTION
1.1 A 1
1.2 A 1
1.3 A 1
1.4 A 1
1.5 A 1
1.6 A 1
1.7 A 1
1.8 A 1

CHAPTER 2. LITERATURE REVIEWAND OBJECTIVES

2.1 A 1
2.2 A 1
2.3 A 1
2.4 A 1
2.5 A 1
2.6 A 1
2.7 A 1
2.8 A 1
2.9 A 1
2.10 A 1

IX
 CONTENTS
CHAPTER 3. MATERIALS AND METHOD/ APPARATUS/ PROBLEM
FORMULATION/DESIGN/METHODOLOGY
3.1 A 1
3.2 A 1
3.3 A 1
3.4 A 1
3.5 A 1
3.6 A 1
3.7 A 1
3.8 A 1
CHAPTER 4. FINDINGS
4.1 A 1
4.2 A 1
4.3 A 1
4.4 A 1
4.5 A 1
4.6 A 1
CHAPTER 5. RESULT AND DISCISSION
5.1 A 1
5.2 A 1
5.3 A 1
5.4 A 1
5.5 A 1
5.6 A 1
CHAPTER 6. CONCLUSIONS 1

BIBLIOGRAPHY 1

XI
 ABSTRACT
Write your Abstract (Only 1 Page)

XIII
Chapter-1

INTRODUCTION

1
Chapter-1

2
Chapter-1

3
Chapter-2

LITERATURE REVIEW

4
Chapter-2

5
Chapter-2

6
Chapter-3

MATERIALS/ APPARATUS/ PROBLEM FORMULATION/

DESIGN/METHODOLOGY

7
Chapter-3

8
Chapter-3

9
Chapter-4

FINDINGS

10
Chapter-4

11
Chapter-4

12
Chapter-5

RESULT AND DISCUSSION

13
Chapter-5

14
Chapter-5

15
Chapter-6

CONCLUSIONS

16
Chapter-6

17
 BIBLIOGRAPHY

1. Khan BH. Non-conventioal energy resources. 2nd ed. New Delhi: Tata McGraw Hill;
2012.
2. Duffie JA, Beckman WA. Solar engineering of thermal processes. 2nd ed. New York:
Wiley; 1980.
3. Khan BH. Non-conventioal energy resources. 2nd ed. New Delhi: Tata McGraw Hill;
2012.
4. McAdams WH. Heat transmission. New York: McGraw-Hill; 1942.
5. Kumar S, Saini RP. CFD based performance analysis of a solar air heater duct provided
with artificial roughness. Renewable Energy 2009; 34(5): 1285-1291.

18