Activities for

Class XII
Activity 1
OBJECTIVE METHOD OF
To verify that the relation R in CONSTRUCTION MATERIAL
the set L of all lines in a plane,
REQUIRED
defined by R = {(l, m) : l ⊥ m}
A piece of plywood, some
is symmetric but neither
pieces of wires (8), nails,
reflexive nor transitive.
white paper, glue etc.

Take a piece of plywood and paste a white paper on it. Fix the
wires randomly on the plywood with the help of nails such that
some of them are parallel, some are perpendicular to each other
and some are inclined as shown in Fig.1.

DEMONSTRATION
1. Let the wires represent the lines l1, l2, ..., l8.

2. l1 is perpendicular to each of the lines l2, l3, l4. [see Fig. 1]

 l l
3. 6 is perpendicular to 7.
4. l2 is parallel to l3, l3 is parallel to l4 and l5 is parallel to l8.

5. (l1, l2), (l1, l3), (l1, l4), (l6, l7) ∈ R

OBSERVATION
1. In Fig. 1, no line is perpendicular to itself, so the relation
R = {( l, m) : l ⊥ m} ______ reflexive (is/is not).
l l
2. In Fig. 1, 1⊥ 2. Is l2 ⊥ l1 ? ______(Yes/No)

∴ ( l1, l2) ∈ R ⇒ ( l2, l1) ______ R (∉/∈)

Similarly, l3 ⊥ l1 . Is l1 ⊥ l3? _______ (Yes/No)

∴ ( l3, l1) ∈ R ⇒ ( l1, l3) ______ R (∉/∈)

Also, l6 ⊥ l7. Is l7 ⊥ l6? _______ (Yes/No)

∴ ( l6, l7) ∈ R ⇒ ( l7, l6) ______ R (∉/∈)

∴ The relation R .... symmetric (is/is not)

3. In Fig. 1, l2 ⊥ l1 and l1⊥ l3 . Is l2 ⊥ l3? ... (Yes/No)

i.e., (l2, l1) ∈ R and (l1 , l3) ∈ R ⇒ (l2, l3) ______ R (∉/∈)

∴ The relation R .... transitive (is/is not).

APPLICATION
This activity can be used to check whether a given relation is an equivalence
relation or not.
 Activity 2
OBJECTIVE METHOD OF
To verify that the relation R in the set L of
CONSTRUCTION
all lines in a plane, defined by R = {( l,
m) : l || m} is an equivalence relation. MATERIAL REQUIRED
A piece of plywood, some
pieces of wire (8),
plywood, nails, white
paper, glue.

Take a piece of plywood of convenient size and paste a white paper on it.
Fix the wires randomly on the plywood with the help of nails such that
some of them are parallel, some are perpendicular to each other and
some are inclined as shown in Fig. 2.
 DEMONSTRATION
1. Let the wires represent the lines l1, l2, ..., l8.

2. l1 is perpendicular to each of the lines l2, l3, l4 (see Fig. 2).

l l
3. 6 is perpendicular to 7.
4. l2 is parallel to l3, l3 is parallel to l4 and l5 is parallel to l8.

5. (l2, l3), (l3, l4), (l5, l8), ∈ R

OBSERVATION
1. In Fig. 2, every line is parallel to itself. So the relation R = {( l, m) : l ||
m} .... reflexive relation (is/is not)

2. In Fig. 2, observe that l2 3l . Is l3 ... l2? (|| / || )

So, (l2, l3) ∈ R ⇒ (l3, l2) ... R (∉/∈)

Similarly, l3 || l4. Is l4 ...l3? (|| / || )
So, (l3, l4) ∈ R ⇒ (l4, l3) ... R (∉/∈) and (l5, l8)

∈ R ⇒ (l8, l5) ... R (∉/∈)

∴ The relation R ... symmetric relation (is/is not)

3. In Fig. 2, observe that l2 || l3 and l3 || l4. Is l2 ... l4 ? (|| / || )

So, (l2, l3) ∈ R and (l3, l4) ∈ R ⇒ (l2, l4) ... R (∈/∉)

Similarly, l3 || l4 and l4 || l2. Is l3 ... l2 ? (|| / || )

So, (l3, l4) ∈ R, (l4, l2) ∈ R ⇒ (l3, l2) ... R (∈,∉)

Thus, the relation R ... transitive relation (is/is not)
Hence, the relation R is reflexive, symmetric and transitive. So, R is an
equivalence relation.

APPLICATION NOTE
This activity can be repeated
This activity is useful in understanding the concept
by taking some more wires
of an equivalence relation.
in different positions.
 METHOD OF CONSTRUCTION
Activity 3 MATERIAL REQUIRED
Cardboard, nails, strings, adhesive
OBJECTIVE and plastic strips.
To demonstrate a function which
is not one-one but is onto.
1. Paste a plastic strip on the left hand side of the cardboard and fix three
nails on it as shown in the Fig.3.1. Name the nails on the strip as 1, 2 and
3.
2. Paste another strip on the right hand side of the cardboard and fix two
nails in the plastic strip as shown in Fig.3.2. Name the nails on the strip
as a and b.
3. Join nails on the left strip to the nails on the right strip as shown in Fig.
3.3.

DEMONSTRATION
1. Take the set X = {1, 2, 3}
2. Take the set Y = {a, b}
3. Join (correspondence) elements of X to the elements of Y as shown in
Fig. 3.3
 OBSERVATION
1. The image of the element 1 of X in Y is __________.
The image of the element 2 of X in Y is __________.
The image of the element 3 of X in Y is __________.

So, Fig. 3.3 represents a __________ .

2. Every element in X has a _________ image in Y. So, the function is
_________(one-one/not one-one).
3. The pre-image of each element of Y in X _________ (exists/does not
exist). So, the function is ________ (onto/not onto).

APPLICATION NOTE
Demonstrate the same
This activity can be used to demonstrate the
activity by changing the
concept of one-one and onto function.
number of the elements of
the sets X and Y.
 METHOD OF CONSTRUCTION
Activity 4 MATERIAL REQUIRED
Cardboard, nails, strings, adhesive
OBJECTIVE and plastic strips.
To demonstrate a function which
is one-one but not onto.
1. Paste a plastic strip on the left hand side of the cardboard and fix two
nails in it as shown in the Fig. 4.1. Name the nails as a and b.
2. Paste another strip on the right hand side of the cardboard and fix three
nails on it as shown in the Fig. 4.2. Name the nails on the right strip as 1,
2 and 3.
3. Join nails on the left strip to the nails on the right strip as shown in the
Fig. 4.3.

DEMONSTRATION
1. Take the set X = {a, b}
2. Take the set Y = {1, 2, 3}.
3. Join elements of X to the elements of Y as shown in Fig. 4.3.
OBSERVATION
1. The image of the element a of X in Y is ______________.
 The image of the element b of X in Y is ______________.

So, the Fig. 4.3 represents a _____________________.

2. Every element in X has a _________ image in Y. So, the function is
_____________ (one-one/not one-one).
3. The pre-image of the element 1 of Y in X __________ (exists/does not
exist). So, the function is __________ (onto/not onto).

Thus, Fig. 4.3 represents a function which is _________ but not onto.

APPLICATION
This activity can be used to demonstrate the concept of one-one but not onto
function.
 METHOD OF CONSTRUCTION
Activity 5 MATERIAL REQUIRED
Cardboard, white chart paper,
OBJECTIVE ruler, coloured pens, adhesive,
pencil, eraser, cutter, nails and
To draw the graph of sin−1 x , using thin wires.
the graph of sin x and demonstrate
the concept of mirror reflection
(about the line y = x).
1. Take a cardboard of suitable dimensions, say, 30 cm × 30 cm.
2. On the cardboard, paste a white chart paper of size 25 cm × 25 cm (say).
3. On the paper, draw two lines, perpendicular to each other and name them
X′OX and YOY′ as rectangular axes [see Fig. 5].

4. Graduate the axes approximately as shown in Fig. 5.1 by taking unit on

X-axis = 1.25 times the unit of Y-axis.
5. Mark approximately the points

π ππ π π π
  ,sin  , ,sin , ... , ,sin  in the coordinate plane and at each
6 64 4 2 2
point fix a nail.
6. Repeat the above process on the other side of the x-axis, marking the
points

 –π –π   –π –π   –π –π 
 ,sin  , ,sin , ... , ,sin approximately and fix nails
6 64 4 2 2
on these points as N1′, N2′, N3′, N4′. Also fix a nail at O.
7. Join the nails with the help of a tight wire on both sides of x-axis to get
the
–π π
graph of sin x from to .
2 2
8. Draw the graph of the line y = x (by plotting the points (1,1), (2, 2), (3, 3),
... etc. and fixing a wire on these points).
9. From the nails N1, N2, N3, N4, draw perpendicular on the line y = x and
produce these lines such that length of perpendicular on both sides of the
,I ,I ,I
line y = x are equal. At these points fix nails, I1 2 3 4 .
10. Repeat the above activity on the other side of X- axis and fix nails at
I1′,I2′,I3′,I4′.
11. Join the nails on both sides of the line y = x by a tight wire that will show
the graph of y=sin−1x .

DEMONSTRATION
Put a mirror on the line y = x. The image of the graph of sin x in the mirror will
represent the graph of sin−1x showing that sin–1 x is mirror reflection of sin x
and vice versa.
OBSERVATION
The image of point N1 in the mirror (the line y = x) is _________.

The image of point N2 in the mirror (the line y = x) is _________.

The image of point N3 in the mirror (the line y = x) is _________.

The image of point N4 in the mirror (the line y = x) is _________. The

image of point N1′ in the mirror (the line y = x) is _________.

′
The image point of N 2 in the mirror (the line y = x) is _________.
′
The image point of N 3 in the mirror (the line y = x) is _________.
′
The image point of N 4 in the mirror (the line y = x) is _________.
The image of the graph of six x in y = x is the graph of _________, and the
image of the graph of sin–1x in y = x is the graph of __________.
APPLICATION

Similar activity can be performed for drawing the graphs of cos–1x, tan−1x, etc.
 METHOD OF CONSTRUCTION
Activity 6 MATERIAL REQUIRED
Cardboard, white chart paper,
OBJECTIVE rails, ruler, adhesive, steel wires
To explore the principal value of and needle.
the function sin–1x using a unit
circle.
1. Take a cardboard of a convenient size and paste a white chart paper on it.
2. Draw a unit circle with centre O on it.
3. Through the centre of the circle, draw two perpendicular lines X′OX and
YOY′ representing x-axis and y-axis, respectively as shown in Fig. 6.1.
4. Mark the points A, C, B and D, where the circle cuts the x-axis and y-axis,
respectively as shown in Fig. 6.1.

5. Fix two rails on opposite

sides of the cardboard
which are parallel to y-
axis. Fix one steel wire
between the rails such
that the wire can be
moved parallel to x-axis
as shown in Fig. 6.2.
6. Take a needle of unit
length. Fix one end of
it at the centre of the
circle and the other
end to move freely
along the circle
Fig. 6.2.

DEMONSTRATION
1. Keep the needle at an
arbitrary angle, say x1
with the positive direction of x-axis. Measure of angle in radian is equal to
the length of intercepted arc of the unit circle.

2. Slide the steel wire between the rails, parallel to x-axis such that the wire
meets with free end of the needle (say P1) (Fig. 6.2).

3. Denote the y-coordinate of the point P1 as y1, where y1 is the perpendicular

distance of steel wire from the x-axis of the unit circle giving y1 = sin x1.

4. Rotate the needle further anticlockwise and keep it at the angle π – x1. Find
the value of y-coordinate of intersecting point P 2 with the help of sliding
steel wire. Value of y-coordinate for the points P1 and P2 are same for the
different value of angles, y1 = sinx1 and y1 = sin (π – x1). This demonstrates
that sine function is not one-to-one for angles considered in first and
second quadrants.
5. Keep the needle at angles – x1 and (– π + x1), respectively. By sliding down
the steel wire parallel to x-axis, demonstrate that y-coordinate for the
points P3 and P4 are the same and thus sine function is not one-to-one for
points considered in 3rd and 4th quadrants as shown in Fig. 6.2.
6. However, the y-
coordinate of the points
P3 and P1 are different.
Move the needle in
anticlockwise
direction

starting from − and

look at the behaviour of y-
coordinates of points P5,
P6, P7 and P8 by sliding the
steel wire parallel to x-axis
accordingly. y-coordinate
of points P5, P6, P7 and P8
are different (see Fig. 6.3). Hence, sine function is one-to-one in

 π π
−
the domian  2 , 2 and its range lies between – 1 and 1.

π π

and denote the y-coordi -

nate of the intersecting
point P9 as y. (see Fig. 6.4).
Then y = sin θ or θ = arc
sin–1y) as sine function is
one-one and onto in the
 ππ 
− ,
domain  22  and
range [–1, 1]. So, its
inverse arc sine function
exist. The domain of arc
sine function is [–1, 1] and Fig. 6.4

l
  −
7. Keep the needle at any arbitrary angle say θ lying in the interval  2,

 −
2 π π range is  2 , 2. This range is called the principal
value of arc sine function (or sin–1 function).

OBSERVATION
1. sine function is non-negative in _________ and __________ quadrants.
2. For the quadrants 3rd and 4th, sine function is _________.

3. θ = arc sin y ⇒ y = ________ θ where ________.

4. The other domains of sine function on which it is one-one and onto
provides _________ for arc sine function.

APPLICATION
This activity can be used for finding the principal value of arc cosine function
(cos–1y).
 are mirror images of each other.
Activity 7 METHOD OF CONSTRUCTION
OBJECTIVE
To sketch the graphs of ax and logax, MATERIAL REQUIRED
Drawing board, geometrical
a > 0, a ≠ 1 and to examine that they instruments, drawing pins, thin
wires, sketch pens, thick white
paper, adhesive, pencil, eraser, a
plane mirror, squared paper.
1. On the drawing board, fix a thick paper sheet of convenient size 20 cm ×
20 cm (say) with adhesive.

Fig. 7
2. On the sheet, take two perpendicular lines XOX′ and YOY′, depicting
coordinate axes.
3. Mark graduations on the two axes as shown in the Fig. 7.
4. Find some ordered pairs satisfying y = ax and y = logax. Plot these points
corresponding to the ordered pairs and join them by free hand curves in
both the cases. Fix thin wires along these curves using drawing pins.
5. Draw the graph of y = x, and fix a wire along the graph, using drawing
pins.

DEMONSTRATION
1. For ax, take a = 2 (say), and find ordered pairs satisfying it as
1 1
x 0 1 –1 2 –2 3 –3 – 4
2 2
1 1
8
2x 1 2 0.5 4 4 8 1.4 0.7 16
and plot these ordered pairs on the squared paper and fix a drawing pin
at each point.
2. Join the bases of drawing pins with a thin wire. This will represent the
graph of 2x.

3. log2x = y gives x=2y. Some ordered pairs satisfying it are:

x 1 2 4 8

y 0 1 –1 2 –2 3 –3
Plot these ordered pairs on the squared paper (graph paper) and fix a
drawing pin at each plotted point. Join the bases of the drawing pins with
a thin wire.
This will represent the graph of log2x.
4. Draw the graph of line y = x on the sheet.
 5. Place a mirror along the wire representing y = x. It can be seen that the
two graphs of the given functions are mirror images of each other in the
line y = x.

OBSERVATION
1. Image of ordered pair (1, 2) on the graph of y = 2x in y = x is ______. It
lies on the graph of y = _______.
2. Image of the point (4, 2) on the graph y = log2x in y = x is _________
which lies on the graph of y = _______.

Repeat this process for some more points lying on the two graphs.

APPLICATION
This activity is useful in understanding the concept of (exponential and
logarithmic functions) which are mirror images of each other in y = x.
 and natural logarithm (to the base
Activity 8 e) of the number x.

METHOD OF CONSTRUCTION
OBJECTIVE MATERIAL REQUIRED
To establish a relationship between Hardboard, white sheet, graph
common logarithm (to the base 10) paper, pencil, scale, log tables or
calculator (graphic/scientific).
1. Paste a graph paper on a white sheet and fix the sheet on the hardboard.
2. Find some ordered pairs satisfying the function y = log10x. Using log tables/
calculator and draw the graph of the function on the graph paper (see Fig.
8)

3. Similarly, draw the graph of y′ = logex on the same graph paper as shown in
the figure (using log table/calculator).
DEMONSTRATION
1. Take any point on the positive direction of x-axis, and note its x-
coordinate.
2. For this value of x, find the value of y-coordinates for both the graphs of y
= log10x and y′ = logex by actual measurement, using a scale, and record
them as y and y′, respectively.

3. Find the ratio y′ .

4. Repeat the above steps for some more points on the x-axis (with different
values) and find the corresponding ratios of the ordinates as in Step 3.
5. Each of these ratios will nearly be the same and equal to 0.4, which is
1
approximately equal to .
log 10e

OBSERVATION
y
S.No. Points on Ratio ′
y=log10x y′=logex y
(approximate)
the x-axis

1. x = _____ y = _____ y1′ = _____ __________

1 1

2. x2=_____ y2 = _____ y2′ = _____ __________

3. x3=_____ y3 = _____ y3′ = _____ __________

4. x4=_____ y4 = _____ y4′ = _____ __________

5. x5=_____ y5 = _____ y5′ = _____ __________

 6. x6=_____ y6 = _____ y6′ = _____ __________

2. The value of y′ for each point x is equal to _________ approximately.

3. The observed value of y′ in each case is approximately equal to the

value of
1
.(Yes/No)
log 10e

4. Therefore, log10 x= .
log 10e

APPLICATION
This activity is useful in converting log of a number in one given base to log
of that number in another base.
NOTE
y
Let, y = log10x, i.e., x = 10 .

Taking logarithm to base e on both the sides, we get log e x = y log10

e

1
or y =
log10
e
(loge x )

⇒log10 x = 1
loge x log10 = 0.434294 (using log tables/calculator).
e
Activity 9
OBJECTIVE MATERIAL REQUIRED
To find analytically the limit of a Paper, pencil, calculator. function f
(x) at x = c and also to check the continuity of the function at that
point.

x 3.9 3.99 3.999 3.9999 3.99999 3.999999 3.9999999

f (x) 7.9 7.99 7.999 7.9999 7.99999 7.999999 7.9999999

METHOD OF CONSTRUCTION
x2 –16 
 , x≠4
1. Consider the function given by f x( )= x–4 


10, x=4
 
2. Take some points on the left and some points on the right side of c (= 4)
which are very near to c.
3. Find the corresponding values of f (x) for each of the points considered in
step 2 above.
4. Record the values of points on the left and right side of c as x and the
corresponding values of f (x) in a form of a table.

DEMONSTRATION
1. The values of x and f (x) are recorded as follows:

Table 1 : For points on the left of c (= 4).

2. Table 2: For points on the right of c (= 4).
x 4.1 4.01 4.001 4.0001 4.00001 4.000001 4.0000001
 f (x) 8.1 8.01 8.001 8.0001 8.00001 8.000001 8.0000001
OBSERVATION
1. The value of f (x) is approaching to ________, as x→4 from the left.
2. The value of f (x) is approaching to ________, as x→4 from the right. 3.
So, lim f (x) = ________ and lim f (x)= ________. x→4
+ x→4

4. Therefore, lim f (x)= ________ , f (4) = ________.

x→4

5. Is lim f (x) = f (4) ________ ? (Yes/No) x→4

6. Since f c f x , so, the function is ________ at x = 4

(continuous/ not continuous).

APPLICATION
This activity is useful in understanding the concept of limit and continuity of a
function at a point.
Activity 10
OBJECTIVE MATERIAL REQUIRED
To verify that for a function f to be Hardboard, white sheets, pencil,
continuous at given point x0, scale, calculator, adhesive.

∆ =y f x( 0 +∆x)– f x( 0) is
arbitrarily small provided.∆x is
sufficiently small.

METHOD OF CONSTRUCTION
1. Paste a white sheet on the hardboard.
2. Draw the curve of the given continuous function as represented in the Fig.
10.
3. Take any point A (x0, 0) on the positive side of x-axis and corresponding to
this point, mark the point P (x0, y0) on the curve.
Y

N1
N2
Dy4
Dx 4 P D y 3 Dy2 Dy1
T2 T1

X
¢ A
X
(x 0 – D x 4 ) M4 x0 M3(x+x
0 D 3) M2(x+x
0 D 2) M1(x+x D 1)
Dx3 Dx2
0

Dx1
¢
Y
Fig. 10
DEMONSTRATION
1. Take one more point M1 (x0 + ∆x1, 0) to the right of A, where ∆x1 is an
increment in x.
2. Draw the perpendicular from M1 to meet the curve at N1. Let the
coordinates of N1 be (x0 + ∆x1, y0 + ∆y1)
x y
3. Draw a perpendicular from the point P ( 0, 0) to meet N1M1 at T1.
y
4. Now measure AM1 = ∆x1 (say) and record it and also measure N T1 1 = ∆ 1

and record it.

5. Reduce the increment in x to ∆x2 (i.e., ∆x2 < ∆x1) to get another point

M2 (x0 + ∆x2,0). Get the corresponding point N2 on the curve

6. Let the perpendicular PT1 intersects N2M2 at T2.

7. Again measure AM2 = ∆x2and record it.

Measure N T2 2 =∆y2 and record it.

8. Repeat the above steps for some more points so that ∆x becomes smaller
and smaller.
OBSERVATION
S.No. Value of increment Corresponding
in x increment in
0
y

1. ∆=
x1 ∆=
y1

2. ∆=
x2 ∆=
y2

3. ∆=
x3 ∆=
y3

4. ∆=
x4 ∆=
y4

5. ∆=
x5 ∆=
y5

06. ∆x6= ∆y6=

07. ∆x7= ∆y7=

08. ∆x8= ∆y8=

09. ∆x9= ∆y9=

10.

2. So,∆ybecomes _________ when ∆xbecomes smaller.

Thus lim
3. ∆→ x0 ∆y= 0 for a continuous function.
APPLICATION
This activity is helpful in explaining the concept of derivative (left hand or
right hand) at any point on the curve corresponding to a function.