Scribd
Upload
50 views2 pages

BEEE Syllabus

The document outlines the course objectives, units, outcomes, and textbooks for the 100022 Basic Electrical and Electronics Engineering course offered by the Electrical Engineering Department at Madhav Institute of Technology & Science in Gwalior. The course covers topics such as DC circuits, AC circuits, magnetic circuits, transformers, rotating electric machines, and digital electronics. Upon completing the course, students will be able to apply circuit theorems, analyze electrical machines and electronic devices, and understand basic concepts in electrical engineering.

Uploaded by

Vivek Gaur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
50 views2 pages

BEEE Syllabus

The document outlines the course objectives, units, outcomes, and textbooks for the 100022 Basic Electrical and Electronics Engineering course offered by the Electrical Engineering Department at Madhav Institute of Technology & Science in Gwalior. The course covers topics such as DC circuits, AC circuits, magnetic circuits, transformers, rotating electric machines, and digital electronics. Upon completing the course, students will be able to apply circuit theorems, analyze electrical machines and electronic devices, and understand basic concepts in electrical engineering.

Uploaded by

Vivek Gaur
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MADHAV INSTITUTE OF TECHNOLOGY & SCIENCE, GWALIOR

(A Govt. Aided UGC Autonomous Institute& NAAC Accredited Institute Affiliated to R.G.P.V., Bhopal MP)
Electrical Engineering Department

100022: Basic Electrical & Electronics Engineering

L T P Total Credits End Sem Mid Sem Quiz/Assignment


02 01 2 04 60 20 20

COURSE OBJECTIVES:

• To impart the basic knowledge about the D.C circuits and its applications.
• To inculcate the understanding about the AC fundamentals.
• To convey the basic knowledge of magnetic circuits and its terminology.
• Highlight the importance of transformers in transmission and distribution of electric power.
• To understand the working of D C Machine.
• To know about various electronic circuits and its importance.

Unit I - D.C. Circuits Analysis: Voltage and Current Sources: Dependent and independent source,
Source conversion, Kirchhoff’s Law, Mesh and Nodal analysis. Network theorems:
Superposition theorem, Thevenin’s theorem & Norton theorem and their applications.

Unit II – Single-phase AC Circuits: Generation of sinusoidal AC voltage, definitions: Average


value, R.M.S. value, Form factor and Peak factor of AC quantity, Concept of Phasor,
analysis of R-L, R-C, R-L-C Series and Parallel circuit, Power and importance of Power
factor.

Unit III- Magnetic Circuits: Basic definitions, AC excitation in magnetic circuits, self inductance
and mutual inductance , Induced voltage, laws of electromagnetic Induction, direction of
induced E.M.F. Flux ,MMF and their relation, analysis of magnetic circuits.

Unit IV- Single-phase Transformer & Rotating Electric Machines: Single phase transformer,
Basic concepts, construction and working principal, Ideal Transformer and its phasor
diagram at No Load, Voltage, current and impedance transformation, Equivalent circuits
and its Phasor diagram, voltage regulation, losses and efficiency, testing of transformers,
Construction & working principle of DC and AC machine.

Unit V - Digital Electronics, Devices & Circuits – Number systems used in digital electronics,
decimal, binary, octal, hexadecimal, their complements, operation and conversion,
Demorgan’s theorem, Logic gates- symbolic representation and their truth table,
Introduction to semiconductors, Diodes, V-I characteristic, Bipolar junction transistors
and their working, Introduction to CB, CE & CC transistor configurations
MADHAV INSTITUTE OF TECHNOLOGY & SCIENCE, GWALIOR
(A Govt. Aided UGC Autonomous Institute& NAAC Accredited Institute Affiliated to R.G.P.V., Bhopal MP)
Electrical Engineering Department
COURSE OUTCOMES

After the completion of the course, the student will be able to –

• Explain the working principle, construction, applications of transformer.


• Understand the basic concepts of DC, AC & magnetic circuits and complex devices such as
semiconductor diodes and field-effect transistors
• Apply the current theorems and laws to solve complex circuits.
• Analyze the performance of electrical machines and electronic devices under different
practical conditions.

Text Book
1. Basic Electrical and Electronics Engineering, Tata McGraw Hill - D.P. Kothari & I.J. Nagrath

Reference Books:
2. Basic Electrical and Electronics Engineering, Tata McGraw Hill – V N Mittle & Arvind Mittal
3. Electrical Machinery- A.E. Fitzgerald, C. Kingsley and Umans - TMH
4. Principles of Electrical Engineering- Vincdent Del Toro- Prentice Hall.
5. Basic Electrical engineering -A,E. Fitzgerald, Higginbotham and Grabel -TMH
6. Integrated Electronics- Millmann & Halkias
7. Electronics Devices & circuits- Sanjeev Gupta, Dhanpat Rai Publication
8. Basic Electrical and Electronics Engineering, Tata McGraw Hill - D.C Kulshreshtha

You might also like