Appliance / Machine / Switchboard safety

MI 3311 GammaGT
Appliance / Machine / Switchboard safety

The MI 3311 GammaGT is a battery powered multifunctional instrument

intended to perform measurements for testing the electrical safety of
portable electrical equipment. Due to large graphical LCD with backlight,
two PASS / FAIL LED indicators and HELP screens for each measurement
the handling of the instrument is clear and simple. Up to 1500 test results
with parameters can be stored in the internal memory of the instrument and
then downloaded to the PC for further data handling and creation of test
report. Lightweight design, pre-programmed and custom test sequences,
optional barcoding, android keyboard application and RFID systems and
built-in calibration unit make the MI 3311 an ideal instrument for high volume
professional safety testing of portable appliances.

MEASURING FUNCTIONS • Scan and test: optional QR or barcoding • PC SW PATLink PRO Plus enables
system and PASS / FAIL QR or barcode label advanced analysis of test results,
• Continuity test with 200 mA; printing make retesting quick and simple. upload of pre-programmed custom
• Insulation resistance; • RFID: support for advanced RFID autosequences and creation of
• Insulation resistance of isolated accessible identification system. professional test reports.
conductive parts; • User friendly: large LCD screen, two Pass
• Substitute leakage current; / Fail LED indicators, help screens and APPLICATION
• Substitute leakage current of isolated warnings make the instrument an extremely
• Professional GT testing;
accessible conductive parts; easy to use.
• General GT testing;
• IEC cord polarity test; • Multi-tasking: instrument performs
• After repair GT safety testing.
• TRMS voltage; continuity test, 250 V and 500 V insulation
• Functional and visual inspection. tests, substitute leakage measurement, STANDARDS
functional and polarity tests.
KEY FEATURES • Memory: up to 1500 test results with Functionality
measuring parameters can be stored in two • EN 50699
• Autosequencing: pre-programmable VDE level memory and downloaded to the PC with • EN 50678
compatible autosequences, up to 50 custom the help of PC SW PATLink PRO. • VDE 0701-0702
prepared autosequences and barcode • Built-in charger & rechargeable batteries: • AS/NZS 3760
autotests speed up testing and ensure that instrument has a built-in charging circuit and • IET COP 5th Ed
no tests are missed. comes complete with a set of rechargeable
• Checkbox: built-in calibration unit performs NiMH batteries. Electromagnetic compatibility
• EN 61326
calibration of the instrument and the • Android application: enables advanced data
calibration results are automatically stored management, use of smart phones camera Safety
into instrument’s memory. for scanning QR and bar-code. • EN 61010-1
• PASS / FAIL: large green and red lights of • PC SW PATLink PRO enables downloading, • EN 61010-031
the LEDs indicate a PASS or FAIL evaluation viewing, printing of test results and exporting
of test result. of data to spreadsheet applications.

www.metrel.si
TECHNICAL DATA ORDERING INFORMATION

FUNCTION Measuring range Resolution Accuracy

PE continuity (200 mA) 0.00 Ω … 19.99 Ω 0.01 Ω ±(5 % of reading + 3 digits)
20.0 Ω … 199.9 Ω 0.1 Ω Indication only
200 Ω … 1999 Ω 1Ω Indication only
Insulation resistance (250 VDC, 500 0.00 MΩ … 19.99 MΩ 0.01 MΩ ±(5 % of reading + 3 digits)
VDC) 20.0 MΩ ... 49.9 MΩ 0.1 MΩ ±(5 % of reading + 3 digits)
50.0 MΩ ... 199.9 MΩ 0.1 MΩ Indication only
Substitute leakage current 0.00 mA … 9.99 mA 0.01 mA ±(5 % of reading + 3 digits)
10.0 mA … 20.0 mA 0.1 mA ±(5 % of reading + 3 digits)
Voltage 0 V … 300 V 1V ±(2 % of reading + 2 digits)
Polarity test Test voltage < 50 VAC Standard set MI 3311
Power supply 6 x 1.2 V NiMH rechargeable batteries, type AA • Instrument GammaGT
Overvoltage category CAT II / 300 V • Small soft carrying bag
• IEC cable, 2 m
COM port RS232, USB and Bluetooth (optional A 1436 BT dongle) • Test probe, black
Dimensions 140 x 80 x 230 mm • Test lead, black, 1.5 m
Weight 0.86 kg • Crocodile clip, black
• Power supply adapter
• NiMH rechargeable batteries, type AA,
6 pcs
• Instruction manual
• Calibration certificate

OPTIONAL ACCESSORIES

Photo Order No. Acc. decription

PC SW PATLink PRO
A 1306 Plus with USB and
RS232-PS/2 cable

A 1105 Barcode scanner

3-phase adapter
A 1316
(16 A CEE-Schuko)
3-phase adapter
A 1317
(32 A CEE-Schuko)

A 1107 RFID reader / writer

RFID tags, self-stick, 25 pcs

A 1108
RFID tags, key-tag, 25 pcs

A 1472 Leakage current clamp

A 1207 Three phase adapter

A 1434 aPAT Android

BT Able printer (battery

A 1488
or mains operated)

Labels for Able printer,

A 1520
(250 labels per roll)

Spare label role for

A 1450
S 2062

A 1436 Bluetooth dongle

METREL D.D.
Measuring and Regulation Equipment Manufacturer S 2062 BT lable printer set
Ljubljanska 77, SI-1354 Horjul, Slovenia
T +386 (0)1 75 58 200, F +386 (0)1 75 49 226
[email protected], www.metrel.si

Note! Photographs in this catalogue may slightly differ from the instruments at the time of delivery.
Subject to technical change without notice.