LM50 23B12R2
LM50 23B12R2
LM50 23B12R2
FEATURES
Universal 80 - 305VAC or 100 - 430VDC Input voltage
Accepts AC or DC input (dual-use of same terminal)
Operating ambient temperature range: -40℃ to +85℃
Low standby power consumption, high efficiency
High I/O isolation test voltage up to 4000VAC
Low ripple & noise
Output short circuit, over-current, over-voltage protection
OVC Ⅲ (meet EN62477)
RoHS Operating altitude up to 5000m
LM50-23BxxR2 series is the ultra-small Mornsun second-generation new industrial standard enclosed power supply, which has innovated the
industrial power supply standard from the aspect of dimension, performance, technology and structure. It features universal AC input and at
the same time accepts DC input voltage, cost-effective, low no load power consumption, high efficiency, high reliability and double or
reinforced insulation. These converters offer excellent EMC performance and meet IEC/EN61000-4, CISPR32/EN55032, IEC/UL/EN/BS EN62368,
EN60335, EN61558, EN62477, GB4943 standards and they are widely used in areas of industrial, street light control, electricity, security,
telecommunications, smart home etc.
Selection Guide
Output Power Nominal Output Voltage Output Voltage Efficiency at Capacitive Load
Certification Part No.*
(W) and Current (Vo/Io) Adjustable Range (V) 230VAC (%) Typ. (uF) Max.
LM50-23B05R2 50 5V/10A 4.75-5.75 86 8500
LM50-23B12R2 50.4 12V/4.2A 11.4-13.8 88 2000
LM50-23B15R2 51 15V/3.4A 14.25-17.25 88 1500
EN/CCC
LM50-23B24R2 52.8 24V/2.2A 22.8-27.6 89.5 1000
(Pending)
LM50-23B36R2 52.2 36V/1.45A 34.2-41.4 90 470
LM50-23B48R2 52.8 48V/1.1A 43.2-52.8 90.5 220
LM50-23B54R2 50 54V/0.925A 48.6-59.4 90.5 100
Note: *Use suffix “C” for terminal with protective cover, suffix “Q” for bottom conformal coating and "QQ" for both sides conformal coating.
Input Specifications
Item Operating Conditions Min. Typ. Max. Unit
AC input 80 -- 305 VAC
Input Voltage Range
DC input 100 -- 430 VDC
Input Voltage Frequency 47 -- 63 Hz
115VAC -- -- 1.2
Input Current
230VAC -- -- 0.8
A
115VAC -- 30 --
Inrush Current Cold start
230VAC -- 60 --
Leakage Current 277VAC <0.75mA
Hot Plug Unavailable
Output Specifications
Item Operating Conditions Min. Typ. Max. Unit
5V -- ±2 --
Output Voltage Accuracy Full load range
12V/15V/24V/36V/48V/54V -- ±1 --
Line Regulation Rated load -- ±0.5 -- %
5V -- ±1 --
Load Regulation 0% - 100% load
12V/15V/24V/36V/48V/54V -- ±0.5 --
2022.09.15-A/0 Page 1 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
AC/DC 50W Enclosed Switching Power Supply
LM50-23BxxR2(-C, -Q, -CQ, -QQ, -CQQ) Series
5V -- 65 150
230VAC, Rated load;
12V/15V -- 65 150
Ripple & Noise* 20MHz bandwidth mV
(peak-to-peak value) 24V -- 80 150
36V/48V/54V -- 120 240
Temperature Coefficient -- ±0.03 -- %/℃
Minimum Load 0 -- -- %
Stand-by Power Consumption -- -- 0.5 W
115VAC -- 6 --
Hold-up Time ms
230VAC -- 30 --
Short Circuit Protection Recovery time <3s after the short circuit disappear. Hiccup, continuous, self-recovery
Over-current Protection 230VAC, Rated load 120% - 200% Io, hiccup, self-recovery
≤7.3VDC (Hiccup or clamp,
5V
self-recover)
≤16.2VDC (Hiccup or clamp,
12V
self-recover)
≤21.75VDC (Hiccup or clamp,
15V
self-recover)
≤33.6VDC (Hiccup or clamp,
Over-voltage Protection 24V
self-recover)
≤48.6VDC (Hiccup or clamp,
36V
self-recover)
≤60.0VDC (Hiccup or clamp,
48V
self-recover)
≤70.0VDC (Hiccup or clamp,
54V
self-recover)
Note: *The “Tip and barrel method” is used for ripple and noise test, output parallel 47uF electrolytic capacitor and 0.1uF ceramic capacitor, please refer to
Enclosed Switching Power Supply Application Notes for specific information.
General Specifications
Item Operating Conditions Min. Typ. Max. Unit
Input - 2000 -- --
Isolation Input - output Electric strength test for 1min., leakage current <5mA 4000 -- -- VAC
Output - 1250 -- --
Input - 100 -- --
Insulation
Input - output At 500VDC 100 -- -- MΩ
Resistance
Output - 100 -- --
Operating Temperature -40 -- +85
℃
Storage Temperature -40 -- +85
Operating Humidity 20 -- 90
Non-condensing %RH
Storage Humidity -- -- 95
Switching Frequency -- 90 -- kHz
-40℃ to -30℃ 5 -- --
+40℃ to +70℃ (85VAC - 165VAC) 1.33 -- --
5V
+50℃ to +70℃ (165VAC - 305VAC) 2 -- --
+70℃ to +85℃ 2 -- -- %/℃
Power Derating -40℃ to -30℃ 5 -- --
Others +50℃ to +70℃ 2 -- --
+70℃ to +85℃ 2 -- --
85VAC - 100VAC 1.25 -- --
%/VAC
277VAC - 305VAC 0.71 -- --
Design refer to IEC/UL/EN/BS EN62368-1,
Safety Standard
EN60335-1/61558-1/62477-1, GB4943.1
2022.09.15-A/0 Page 2 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
AC/DC 50W Enclosed Switching Power Supply
LM50-23BxxR2(-C, -Q, -CQ, -QQ, -CQQ) Series
Mechanical Specifications
Case Material Metal (AL5052, SGCC)
Dimensions 99.00 x 65.00 x 30.00 mm
Weight 150g (Typ.)
Cooling Method Free air convection
Note: 1. With an AC input voltage between 80 -100VAC /277-305VAC and a DC input between 100 -140VDC/390-430VDC the output power must be derated as
per the temperature derating curves;
2. This product is suitable for applications using natural air cooling; for applications in closed environment please consult Mornsun FAE.
2022.09.15-A/0 Page 3 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
AC/DC 50W Enclosed Switching Power Supply
LM50-23BxxR2(-C, -Q, -CQ, -QQ, -CQQ) Series
2022.09.15-A/0 Page 4 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation
AC/DC 50W Enclosed Switching Power Supply
LM50-23BxxR2(-C, -Q, -CQ, -QQ, -CQQ) Series
Note:
1. For additional information on Product Packaging please refer to www.mornsun-power.com. Packaging bag number: 58220267;
2. Unless otherwise specified, parameters in this datasheet were measured under the conditions of Ta=25℃, humidity<75%RH with nominal
input voltage and rated output load;
3. The room temperature derating of 5℃/1000m is needed for operating altitude greater than 2000m;
4. All index testing methods in this datasheet are based on our company corporate standards;
5. In order to improve the efficiency at high input voltage, there will be audible noise generated, but it does not affect product
performance and reliability;
6. We can provide product customization service, please contact our technicians directly for specific information;
7. Products are related to laws and regulations: see "Features" and "EMC";
8. The out case needs to be connected to the earth ( )of system when the terminal equipment in operating;
9. The output voltage can be adjusted by the ADJ, clockwise to increase;
10. Our products shall be classified according to ISO14001 and related environmental laws and regulations, and shall be handled by
qualified units;
11. The power supply is considered a component which will be installed into a final equipment. All EMC tests should be confirmed with the
final equipment. Please consult our FAE for EMC test operation instructions.
2022.09.15-A/0 Page 5 of 5
MORNSUN Guangzhou Science & Technology Co., Ltd. reserves the copyright and right of final interpretation