Sep.

2012 A-49-BK, A-49-WH

-BK SERVICE NOTES

Issued by RJA
-WH

Table of Contents
Cautionary Notes ..............................................................2 Parts List ...........................................................................10
Specifications .....................................................................3 Verifying the Version......................................................11
Location of Controls (Top)...............................................4 Data Backup and Restore Operations ..........................11
Location of Controls Parts List (Top) .............................4 Performing a Factory Reset............................................11
Location of Controls (Rear)..............................................5 Updating the System ......................................................11
Location of Controls Parts List (Rear) ............................5 Test Mode .........................................................................12
Exploded View ..................................................................6 Circuit Board (Main Board) ...........................................13
Exploded View Parts List.................................................7 Circuit Diagram (Main Board) ......................................14
Plane View..........................................................................8 Circuit Board (Panel Board)...........................................16
Plane View Parts List ........................................................9 Circuit Diagram (Panel Board)......................................18
Keyboard Parts List...........................................................9

A-49-WH

A-49-BK

Copyright © 2012 Roland Corporation

All rights reserved. No part of this publication may be reproduced in any form without the written permission
of Roland Corporation.
17058843E0 CC-KWS
Sep. 2012 A-49-BK, A-49-WH

Cautionary Notes

Before beginning the procedure, please read

through this document. The matters described may
differ according to the model.

User Data Cannot Be Saved

The values of parameters set in the Function mode cannot be backed up onto
external media. They also cannot be noted down on paper.

Part Replacement
When replacing components near the power-supply circuit or a heat-
generating circuit (such as a circuit provided with a heat sink or including a
cement resistor), carry out the procedure according to the instructions with
respect to the part number, direction, and attachment position (mounting so as
to leave an air gap between the component and the circuit board, etc.).

Parts List
A component whose part code is ******** will not be supplied as a service part
because one of the following reasons applies.
• Because it is supplied as an assembled part (under a different part code).
• Because a number of circuit boards are grouped together and supplied as
a single circuit board (under a different part code).
• Because supply is prohibited due to copyright restrictions.
• Because reissuance is restricted.
• Because the part is made to order (at current market price).
• Because it is carried in electronic data on the Roland web site.
• Because it is a package or an accessory irrelevant to the function
maintenance of the main body.
• Because it can be replaced with an article on the market. (battery or etc.)

Circuit Diagram
In the circuit diagram, “NIU” is an abbreviation for “Not in Use,” and
“UnPop” is an abbreviation for “Unpopulated.” They both mean non-mounted
components. The circuit board and circuit board diagram show silk-screened
indications, but no components are mounted.

2
Sep. 2012 A-49-BK, A-49-WH

Specifications

Roland A-49: MIDI KEYBOARD CONTROLLER

Keyboard Weight
49 keys (with velocity) 2.5 kg / 5 lbs 9 oz

Controllers Accessories
Buttons: S1, S2 (Assignable) Owner’s Manual (#5100025000)
Knobs: C1, C2 (Assignable) A-49 CD-ROM (#********)
Foot Pedals: HOLD, EXPRESSION USB Cable (#5100011002)
Pitch Bend/Modulation Lever SONAR LE DVD-ROM (Windows) (#********)
D-BEAM Controller SONAR LE installation guide (Windows) (#********)

Buttons Options (sold separately)

[Function] button, [SuperNATURAL] button, Pedal Switch (DP-2/DP-10)
[Octave +/-] button, [Transpose] button, Expression Pedal (EV-5/EV-7)

Display
Power Indicator LED, Octave Indicator LED

Connectors * Printed matters will not be supplied after the end of the production. Then,
HOLD Pedal jack: 1/4-inch phone type download the electronic file from the Roland web site.
EXPRESSION Pedal jack: 1/4-inch TRS phone type * In the interest of product improvement, the specifications and/or appearance of
MIDI OUT connector this unit are subject to change without prior notice.
USB COMPUTER port (USB Type B)

Interface
USB

Power Supply
Supplied from the computer via USB COMPUTER port

Current Draw
98 mA

Dimensions
836 (W) x 182 (D) x 84 (H) mm
32-15/16 (W) x 7-3/16 (D) x 3-5/16 (H) inches

3
Sep. 2012 A-49-BK, A-49-WH

Location of Controls (Top)

fig.panel.eps

1 3 7 8 5

10

Location of Controls Parts List (Top)

No. Part Code Part Name Description Q’ty

1 5100029489 ESCUTCHEON D-BEAM CONTROLLER 1
2 03126134 LED(INFRARED) TLN233(F) 1
02230578 LED SPACER LDS-50R 1
3 01900612 DIODE TPS611(F) 1
12169368 LED SPACER LDS-40B 1
4 5100018908 LED L-C192TBCT-IA 1
5 03787690 R-KNOB W/INDICATOR BLACK 710-04037-07-01/08-01 2
01561690 9M/M ROTARY POTENTIOMETER RK09D1130A0V 50KB W/O CLICK 2

5100025667 RUBBER SW 1
* This unit includes the following parts.
6 ******** RUBBER SW 4P (1) 1
7 ******** RUBBER SW 4P (2) 1

8 5100006346 LED KP-1608SURC 16

9 03234723 BENDER PB-H0204 1
10 5100023836 PANEL SHEET for BK 1
5100029764 PANEL SHEET for WH 1

4
Sep. 2012 A-49-BK, A-49-WH

Location of Controls (Rear)

fig.rear.eps

1 2 3

Location of Controls Parts List (Rear)

No. Part Code Part Name Description Q’ty

1 00569278 6.5MM JACK LGR4609-7100F 2
2 02892878 DIN(MIDI) JACK 2DJ-00600003 1
3 5100010665 USB CONNECTOR B TYPE FEMALE 2549A-04G2T(610-02001-04-00) 1

5
Sep. 2012 A-49-BK, A-49-WH

Exploded View
fig.bunkai.eps

8
View 3

View 2

11

10

12

13
View 1

6
Sep. 2012 A-49-BK, A-49-WH

Exploded View Parts List

No. Part Code Part Name Description Q’ty

1 03787690 R-KNOB W/INDICATOR BLACK 710-04037-07-01/08-01 2
2 5100023836 PANEL SHEET for BK 1
5100029764 PANEL SHEET for WH 1
3 5100023834 TOP CASE for BK 1
5100029355 TOP CASE for WH 1
4 5100029489 ESCUTCHEON D-BEAM CONTROLLER 1

5100025667 RUBBER SW 1
* This unit includes the following parts.
5 ******** RUBBER SW 4P (1) 1
6 ******** RUBBER SW 4P (2) 1

7 5100029137 PANEL SHEET ASSY 1

8 03234723 BENDER PB-H0204 1
9 5100025880 MAIN SHEET ASSY 1
10 5100009999 KEYBOARD ASSY MSK-249 W/O CABLE (990-08028-10-09) 1
11 5100011514 CA ASSY(452-09045-03-00) 26WAY 340MM W/2 HEADER 1
12 5100023835 BOTTOM CASE for BK 1
5100029356 BOTTOM CASE for WH 1
13 12359137 RUBBER FOOT SJ-5012 BLK 5

7
Sep. 2012 A-49-BK, A-49-WH

Plane View
fig.bunkai-H1.eps

View 1
a

View 2

View 3

8
Sep. 2012 A-49-BK, A-49-WH

Plane View Parts List

View 1
No. Part Code Part Name Description Q’ty
a 40011323 SCREW 3X10 BINDING TAPTITE P BZC 21

View 2, 3
No. Part Code Part Name Description Q’ty
b 40011312 SCREW 3X8 BINDING TAPTITE P FE BZC 14

Keyboard Parts List

fig.key-MSK2.eps

1 2 3

10 9 8 7 a

No. Part Code Part Name Description Q’ty

5100009999 KEYBOARD ASSY MSK-249 W/O CABLE (990-08028-10-09)

1 03786378 NATURAL KEY C FOR MSK-2 (710-03111-11-00) 4

03786389 NATURAL KEY D FOR MSK-2(710-03111-12-00) 4
03786390 NATURAL KEY E FOR MSK-2 (710-03111-13-00) 4
03786401 NATURAL KEY F FOR MSK-2 (710-03111-18-00) 4
03786412 NATURAL KEY G FOR MSK-2 (710-03111-15-00) 4
03786423 NATURAL KEY A FOR MSK-2 (710-03111-16-00) 4
03786434 NATURAL KEY B FOR MSK-2 (710-03111-07-00) 4
03786445 NATURAL KEY C’ FOR MSK-2 (710-03111-14-00) 1
2 03786456 SHARP KEY FOR MSK-2 (710-03111-21-01) 20
3 5100009931 KEY FELT MSK-2 HOOK T2.5X695X5.5 1
4 03456967 COILED SPRING NATURAL KEY(752-01015-01-02) 29
03456978 COILED SPRING SHARP KEY 20
5 5100009933 KEY FELT MSK-2 BACK T3.0X677X6 1
6 04230834 RUBBER SWITCH 12P FOR MSK-1/2(722-01015-01-05) 3
04230845 RUBBER SWITCH 13P MSK-1/MSK-2(722-01015-02-05) 1
7 03897389 PWB KEYBOARD ASSY 990-02067-10-00 1
8 ******** CHASSIS KEYBOARD FOR MSK-2 1
9 5100010749 KEY FELT MSK-2 BOTTOM L T2.5X677X15 1
10 5100009935 KEY FELT MSK-2 BOTTOM M T2.5X677X10 1

a 40011189 SCREW 3X8 PAN TAPTITE-P FE ZC 28

9
Sep. 2012 A-49-BK, A-49-WH

Parts List
fig.-part1-e.eps

Safety Precautions: Due to one or more of the following reasons,

The parts marked have parts with parts code ******** cannot be supplied as service parts.
safety-related characteristics. Use
only listed parts for replacement. • Part supplied only as a component in a complete assembly
• Copyright does not permit the part to be supplied
• Part is sold commercially

Note: The parts marked # are new. (initial parts) The description “Q’ty” means a necessary number of the parts per one product.

CASING
# 5100023834 TOP CASE for BK 1
# 5100023835 BOTTOM CASE for BK 1
# 5100023836 PANEL SHEET for BK 1
# 5100029355 TOP CASE for WH 1
# 5100029356 BOTTOM CASE for WH 1
# 5100029764 PANEL SHEET for WH 1

KNOB, BUTTON
03787690 R-KNOB W/INDICATOR BLACK 710-04037-07-01/08-01 2
# 5100025667 RUBBER SW 1

JACK, EXT TERMINAL

00569278 6.5MM JACK LGR4609-7100F 2
02892878 DIN(MIDI) JACK 2DJ-00600003 1
5100010665 USB CONNECTOR B TYPE FEMALE 2549A-04G2T(610-02001-04-00) 1

KEYBOARD ASSY
5100009999 KEYBOARD ASSY MSK-249 W/O CABLE (990-08028-10-09) 1

PWB ASSY
# 5100025880 MAIN SHEET ASSY 1
# 5100029137 PANEL SHEET ASSY 1

DIODE
01900612 DIODE TPS611(F) 1
03126134 LED(INFRARED) TLN233(F) 1
5100018908 LED L-C192TBCT-IA 1
5100006346 LED KP-1608SURC 16

POTENTIOMETER
01561690 9M/M ROTARY POTENTIOMETER RK09D1130A0V 50KB W/O CLICK 2

WIRING, CABLE
# 5100010664 4X50-P2.0-PHR-PHR-F WIRING Bender <-> Panel Board 1
# 5100029177 SML2CD-22X80-BDX10(BL) WIRING Main Board <-> Panel Board 1
5100011514 CA ASSY(452-09045-03-00) 26WAY 340MM W/2 HEADER Main Board <-> Keyboard 1

SCREWS
40011312 SCREW 3X8 BINDING TAPTITE P FE BZC 14
40011323 SCREW 3X10 BINDING TAPTITE P BZC 21

MISCELLANEOUS
03234723 BENDER PB-H0204 1
# 5100029489 ESCUTCHEON D-BEAM CONTROLLER 1
12359137 RUBBER FOOT SJ-5012 BLK 5
02230578 LED SPACER LDS-50R 1
12169368 LED SPACER LDS-40B 1
# 5100030448 LABEL WHITE FOR GB only for WH 1
40122645 NITTO FILAMENT TAPE #3883 W19MM 50M 60P (CM) 0.1

ACCESSORIES (Standard)
5100011002 USB CONNECT CORD(F2369825R0) 2M USBC-A/1-C/1-B-0 (BLACK) 1
# 5100024999 OWNER’S MANUAL JAPANESE 1
# 5100025000 OWNER’S MANUAL ENGLISH 1

10
Sep. 2012 A-49-BK, A-49-WH

Verifying the Version Performing a Factory Reset

1. Press FUNCTION.
Items Required 2. At the keyboard, press the key labeled FACT RESET.
• Computer 3. At the keyboard, press the key labeled ENTER.
• USB cable The factory reset is executed, and parameters that have been set in the
Function mode are reset to their factory-default values.
• USB driver
* Obtain this from one of the following web pages, and install it on the computer
mentioned above.
http://www.roland.co.jp/
Updating the System
http://www.roland.com/

Items Required
Procedure • Computer
1. While holding down FUNCTION, TRANSPOSE, and OCTAVE +, • USB cable
connect the USB COMPUTER connector on the rear panel to a USB • Update program (obtained via Service Net)
connector on the computer. • UpdSMF.exe (obtained via Service Net [Info No. 102333])

The pattern in which the four buttons of S1, S2, - and + light up and go • USB driver
dark indicates the version, as shown in the following table.
* Obtain this from one of the following web pages, and install it on the computer
mentioned above.
Version S1 S2 - + http://www.roland.co.jp/
1.0 * http://www.roland.com/
1.1 * *
1.2 * *
1.3 * * * Procedure
2.0 *
2.1 * * 1. While holding down TRANSPOSE and OCTAVE +, connect the USB
2.2 * * COMPUTER connector on the rear panel to a USB connector on the
2.3 * * * computer.
3.0 * *
OCTAVE + flashes.
3.1 * * *
3.2 * * * 2. Run UpdSMF.exe.
3.3 * * * *
3. Set MIDI Out Device to A Series Keyboard.
*: illuminated, blank: dark
4. Click Path and specify the folder that contains the update program
2. Disconnect the USB cable. (SMF).

5. Click Scan SMF.

6.
Data Backup and Restore 7.
Select the displayed update program.

Click Send.
Operations Sending of the update program starts. After about 1 minute, the update
finishes, and OCTAVE + and the octave indicator on the A-49 flash in
The values of parameters set in the Function mode cannot be backed up alternation.
onto external media. Also, although values can be set, no means exists for 8. Quit UpdSMF.exe.
checking set values.
9. Detach the USB cable, then without pressing any buttons, reattach it.
Executing a factory reset resets all parameters to their factory-default
The unit starts up in the normal mode.
values. For details about parameters, refer to Changing the A-49
Settings (owner’s manual, p. 34). * If the update fails, the unit starts up in the Update mode instead of the normal
mode.
10. Execute a factory reset.

11
Sep. 2012 A-49-BK, A-49-WH

Test Mode

Items Required Pedal and Knob Test

• Computer 1. Operate the expression pedal connected to the EXPRESSION jack from
• Expression pedals (EV-5, etc.) x 2 MIN to MAX.
• MIDI sound module 2. Operate the expression pedal connected to the HOLD jack from MIN to
• MIDI cable x 1 MAX.
• USB cable x 1
3. Operate the C1 knob from MIN to MAX.

4. Operate the C2 knob from MIN to MAX.

• USB driver
When all pedals and knobs have been operated, if no problem has been
* Obtain this from one of the following web pages, and install it on the computer found, execution automatically advances to the next test item.
mentioned above.
http://www.roland.co.jp/
http://www.roland.com/ Bender Test
1. Move the bender lever from left to right, then release your grip on it.
Making the Connections 2. Move the bender lever (modulation lever) toward the back, then release
your grip on it.
1. Connect the expression pedals to the HOLD jack and the EXPRESSION
If no problem is found, execution automatically advances to the next test
jack.
item.
2. Connect the MIDI sound module to the MIDI OUT connector and turn on
the power to the MIDI sound module.
D Beam Test
Entering the Test Mode 1. Place your hand over the panel at a distance of approximately 5
centimeters, and press the key for the highest note (C6).
While holding down FUNCTION and TRANSPOSE, connect the USB The lowest position is set.
COMPUTER connector on the rear panel to a USB connector on the
computer. 2. Place your hand over the panel at a distance of approximately 30
centimeters, and press the key for the highest note (C6).
When the unit enters the Test mode, all LEDs on the panel light up.
The highest position is set.

3. Move your hand closer to the panel, and verify that the uppermost LED
Quitting the Test Mode of the octave indicator lights up.
Disconnect the USB cable. 4. Slowly move your hand away from the panel.
When the highest position of the D Beam is detected, system
Skipping Test Items initialization is automatically carried out.
When the Test mode ends, all 6 octave indicators flash.
Test items cannot be skipped.
5. Disconnect the USB cable.
* Quitting the Test mode without carrying out the D Beam test causes the unit
LED Test not to start up in the normal mode. Be sure to perform the D Beam test. If the D
Verify that all LEDs are lighted, then press the key for the highest note Beam test cannot be accessed, the D Beam is faulty. Replace the part and test it.
(C6).
* Pressing the lowest note (A0) here lets you skip steps 1 and 2 of D Beam Test
(setting the lowest and highest positions of the D Beam).
Note, however, that when the main board or panel board has been
replaced, this must not be skipped. In such cases, be sure to press the
highest note (C6).

Switch Test
Press the lighted button.
The pressed button goes dark and the next button lights up.
When all buttons have been pressed and no problem has been found,
execution automatically advances to the next test item.

Keyboard Test
Slowly and lightly press all 49 keys.
When you have finished pressing all keys, if no problem has been found,
execution automatically advances to the next test item.

12
Sep. 2012 A-49-BK, A-49-WH

Circuit Board (Main Board)

fig.b-main.eps

13
Sep. 2012 A-49-BK, A-49-WH

Circuit Diagram (Main Board)

fig.d-main.eps@L
D2 D+3.3V
KDS122 D+3.3V
2 1 R13
JK2 R15 DGND 2 R5
L2 1k 100k 1 AD_HOLD

3
2 3
4 100 IC2
HOLD 3
1 D+3.3V C35 IC1 R6 100
L5 1000pF AK2923H-E2 4 3
R11 2 7 COM
LGR4609-7100F DGND DGND AD_C2 5 6
1 1k AD_C1 1 5 D+3.3V
AD_HOLD 12 4 16
D1 AD_EXPR 15 3 VCC C6
D+3.3V AD_MOD 14 2
KDS122 D+3.3V AD_BEND 13 1 0.1uF
2 1 0 8
R16 DGND R14 ASEL2 9 GND
JK3 L4 1k 100k
6
7 R4 AD_EXPR ASEL1
ASEL0
10
11
C
B

3
2 5 6 A 7
4 100 INH VEE
EXPR. 3 C34 IC1 DGND DGND
1 D+3.3V
L1 R12 1000pF AK2923H-E2 TC74LVX4051FK(EL)
LGR4609-7100F DGND DGND
2 6V
1 1k
D+3.3V
JK4 TP34
TP35
1000pF
1000pF C60
C61
2DJ-00600003 TP36 1000pF

8
1000pF C62
TP37

0.1uF
C63
MIDI IC1 TP38 1000pF C64

C8
TP39 1000pF C65
TP40 1000pF
OUT AK2923H-E2 TP41 1000pF C66

4
C67
10

VBUS+5V
3
5
2
4
1
9

DGND
R2
+ L6 220 D+3.3V
DGND CN2 RA6
EXB28V101JX
DGND 1 1 8 T0
RA2 2 2 7
2
- EXB28V103JX 5 4 T1
1 MIDI-TX 6 3 3 3 6 T2
L3 R1 7 2 4 4 5 T3
3

220 Q1 8 1 5 1 8 T4
1 RA1
3
5 4 6 2 7 T5
DTA124EUA T-106(PB FREE) EXB28V103JX 6 3 7 3 6 T6
7 2 8 4 5 T7
2

Q2 8 1 100pF 9 PR6
DGND DTC114EUAT106(PB FREE) C19 100pF 10 SC6 RA9
C28 100pF 11 PR5 EXB28V101JX
C26 100pF 12 SC5
C21
MSK-2 C22
C27
100pF
100pF
13
14
PR4
SC4
C16 100pF 15 PR3
To Keyboard C20
C13
100pF
100pF
16
17
SC3
PR2
C18 100pF 18 SC2
Cable Assy C17
C23
100pF
100pF
19
20
PR1
SC1
C15 100pF 21 PR0
C25 100pF 22 SC0
C24 100pF 23 PR7
C14 100pF 24 SC7
25
D+3.3V D+3.3V D+3.3V D+3.3V D+3.3V D+3.3V D+3.3V D+3.3V 26
DGND
C38 C39 C41 C40 C45 C44 C43 C42 6501S-26G2
0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF VBUS+5V
DGND DGND DGND DGND DGND DGND DGND DGND C36 0.1uF
CN1
1 DGND
TP43 2
3
TP42 4
5 SWS0
6 SWS1 SW
D3 KDS160 To PANEL BOARD 7
8
9
SWS2
SWS3 SCAN [~12]
VBUS+5V D+3.3V RA12 SWD0 (H-Active)
10 SWD1
NJM2882F33-TE1 EXB28V103JX 56 4
3 11 SWD2
1 5 (300mA max.) 7 2 12 LSCK
VIN VOUT 8 1 13 LSD0
14
GND

3 4 DGND LSD1 R22 0

10uF

CTRL N-BP 15 DB_PLS

C31

TP13
10uF

16 AD_C1
C29
0.1uF

17 AD_C2 D+3.3V
IC4 8 1
C2
2

7 2 18
19 AD_MOD
EXB28V103JX 65 3
4 20 AD_BEND C37
RA13 21
22 DGND 0.1uF
DGND TP44
22FMN-BTK-A (LF)(SN) DGND
TP49 AD_DB
R21
10k
DGND

TP18 PR6 TP3 SWS0 C46 100pF SWS0

TP19 SC6 TP4 SWS1 C47 100pF SWS1
TP20 PR5 TP5 SWS2 C48 100pF SWS2
TP21 SC5 TP6 SWS3 C49 100pF SWS3
TP22 PR4 TP7 SWD0 C50 100pF SWD0
TP23 SC4 TP8 SWD1 C51 100pF SWD1
TP24 PR3 TP9 SWD2 C52 100pF SWD2
TP25 SC3 TP10 LSCK C53 100pF LSCK
TP26 PR2 TP11 LSD0 C54 100pF LSD0
TP27 SC2 TP12 LSD1 C55 100pF LSD1
TP28 PR1
TP29 SC1 TP14 AD_C1 C56 100pF AD_C1
TP30 PR0 TP15 AD_C2 C57 100pF AD_C2
TP31 SC0
TP32 PR7 TP16 AD_MOD C58 100pF AD_MOD
TP33 SC7 TP17 AD_BEND C59 100pF AD_BEND
DGND

14
 Sep. 2012 A-49-BK, A-49-WH

fig.d-main.eps@R

D+3.3V C30
TP52 10uF DGND
C4 0.1uF
C7 0.1uF
C1 0.1uF C3 0.1uF
C9 0.1uF C10 0.1uF
DGND DGND
JK1
D+3.3V
X1 VBUS+5V 2549A-04G2T
6
50
75
100
28
11
R18
C5 0.1uF

0 DSX321G 8.000MHZ

EXCML16A270U
22 13
C32 10uF

VBAT
VDD_1
VDD_2
VDD_3
VDD_4
VDD_5
21 VDDA OSC_OUT

UnPop

F ( 1% )
R3 0.1
VREF+ 1 3
20

10
20
2
4

L8
19 VREF- 12

3
2
1
4
VSSA OSC_IN C11 C12
DGND 10pF 10pF
AD_DB 23 DGND
ADIN0 24 PA0-WKUP/USART2_CTS/ADC_IN0/TIM2_CH1_ETR
9 SWD2 R10 R9
MIDI-TX 25 PA1/USART2_RTS/ADC_IN1/TIM2_CH2
PC15-OSC32_OUT DGND EZJZ1V800AA EZJZ1V800AA
26 PA2/USART2_TX/ADC_IN2/TIM2_CH3
ASEL0 29 PA3/USART2_RX/ADC_IN3/TIM2_CH4
ASEL1 30 PA4/SPI1_NSS/USART2_CK/ADC_IN4 8 SWD1 DGND DGND
ASEL2 31 PA5/SPI1_SCK/ADC_IN5PC14-OSC32_IN
32 PA6/SPI1_MISO/ADC_IN6/TIM3_CH1 L7
DB_PLS 35 PA7/SPI1_MOSI/ADC_IN7/TIM3_CH2
36 PB0/ADC_IN8/TIM3_CH3 ACM2012-900-2P-T002
15 PB1/ADC_IN9/TIM3_CH4 70 USB-D- R8 12 2 3
16 PC0/ADC_IN10
PA11/USART1_CTS/CANRX/USBDM/TIM1_CH4 71 USB-D+
17 PC1/ADC_IN11
PA12/USART1_RTS/CANTX/USBDP/TIM1_ETR R7 12
18 PC2/ADC_IN12 1 4
33 PC3/ADC_IN13 R20
34 PC4/ADC_IN14
PC5/ADC_IN15 90 NJTRST TP1 1.5k
63 PB4/JNTRST 89 TRACESWO
64 PC6 PB3/JTDO/TRACESWO 77 JTDI TP2
65 PC7 PA15/JTDI 76 SWCLK
66 PC8 PA14/JTCK/SWCLK 72 SWDIO
KBD 78 PC9 PA13/JTMS/SWDIO
79 PC10
SCAN SWD0 80 PC11 93
EXB28V101JX 7 PC12 PB7/I2C1_SDA/TIM4_CH2 92
PC13-TAMP_RTC
PB6/I2C1_SCL/TIM4_CH1 91
SC0 1 8
(H-Active) SC1 2 7 97 PB5/I2C1_SMBAI
RA3 3 6 98 PE0/TIM4_ETR
SC2 4 5 1 PE1
SC3
SC4
1
2
8
7
2 PE2/TRACECK
3 PE3/TRACED0 NC
73 CN3
SC5 3 6 4 PE4/TRACED1 B6B-PH-K-S (LF)(SN)
SC6 4 5 5 PE5/TRACED2
SC7R 38 PE6/TRACED3
RA7 EXB28V101JX 39 PE7
40 PE8
RA10 41 PE9 96 T1 D+3.3V
42 PE10 PB9/TIM4_CH4 95 T0
SC7 EXB28V101JX
1 8 43 PE11 PB8/TIM4_CH3
1
2
3
4
5
6

LSCK 2 7 44 PE12
LSD0 3 6 45 PE13 TP50
LSD1 4 5 46 PE14 TP51
PE15
PR0 RA8 EXB28V101JX
1 8 81 SWCLK
PR1 2 7 82 PD0 SWDIO
TP45
KBD PR2 3 6 83 PD1 TRACESWO
TP46
SCAN PR4 PR3 4 5 84 PD2/TIM3_ETR SWRST
TP47
1 8 85 PD3 TP48
(H-Active) PR5 2 7 86 PD4
PR6 3 6 87 PD5 DGND
PR7 4 5 88 PD6 69 USB_PU
PD7 PA10/USART1_RX/TIM1_CH3 68
RA4 EXB28V101JX 55 56 PD8 PA9/USART1_TX/TIM1_CH2 67
RA5 57 PD9 PA8/USART1_CK/TIM1_CH1/MCO
EXB28V101JX 58 PD10 54 T7
SWS0 1 8 59 PD11 PB15/SPI2_MOSI/TIM1_CH3N 53 T6
SWS1 2 7 60PB14/SPI2_MISO/USART3_RTS/TIM1_CH2N
PD12 52 T5 KBD
D+3.3V SWS2 3 6 61PB13/SPI2_SCK/USART3_CTS/TIM1_CH1N
PD13 51 T4
SWS3 4 PB12/SPI2_NSS/I2C2_SMBAI/USART3_CK/TIM1_BKIN
5 62 PD14 48 T3 DATA
LED30 PD15 PB11/I2C2_SDA/USART3_RX 47 T2 (H-Active)
R25 680 37 PB10/I2C2_SCL/USART3_TX
2 UnPop UnPop 94 PB2/BOOT1
VSS_1
VSS_2
VSS_3
VSS_4
VSS_5

1 R17 0 BOOT0
SWRST 14
KP-1608SURC NRST
IC3
49
74
99
27
10
R19

C33
0

1000pF
STM32F103VBT6
DGND DGND
DGND

15
Sep. 2012 A-49-BK, A-49-WH

Circuit Board (Panel Board)

fig.b-panel.eps

16
Sep. 2012 A-49-BK, A-49-WH

17
Sep. 2012 A-49-BK, A-49-WH

Circuit Diagram (Panel Board)

fig.d-panel.eps@L
R34
100k C53
PD+5V L9 100uH (1.0Amax)
1uF 25V CDRH104RNP-101NC-R
IC8
PQ1CZ41H2ZPH

F (1%)
10uF (K)
220uF

R36
5.6k
1 2 D14 C55 16V

C52
VIN VOUT PDGND

COM
5 4
ON/OFF OADJ RB160L-40 TE25(PB FREE)
C54
Vref=1.26V
PDGND 0.1uF

3
R35 f=300kHz

TP96 2.2k F (1%)

A-4.5V (OPAMP-)

2
PD+3.3V XDB_BOOT
C50 0.1uF
PD+3.3V PD+3.3V
PDGND

16
IC10 PD+3.3V
R30 RA19 1

VDD
100k 15 1 8
Q11 14 2 7 UnPop 2 1
LDB 2 Q10 13 3 6 KP-1608SURC [SupNat.]
DATA Q9 12 4 5 EXB28V103JX LED6
LCLK 3 Q8 11 RA1812 8
7 UnPop 1 2 1 KP-1608SURC [S2]
CLOCK Q7 10 3 6 EXB28V103JX LED2
Q6 9 41
R31 Q5 8 85 LQB4 2 1 KP-1608SURC [S1]
100k Q4 7 2 7 LQB3
Q3 6 3 6 LQB2 LED1
Q2 5 4 5 LQB1 2 1 KP-1608SURC [FUNC.]
VSS
PDGND Q1 4 LQB0 LED5
Q0 RA17 EXB28V471JX CD+5V
BU2090F-E2 R32 1k
1
2 1 [POWER]
PDGND LED11 L-C192TBCT-IA
IF=2.1[mA](Blue)

(Red) VF=1.9Vtyp.
(Blue) VF=2.9Vtyp.

I
T

PD+3.3V

2 1 KP-1608SURC [OCT_6]
LED17
2 1 KP-1608SURC [OCT_5]
PD+3.3V
LED16
C51 0.1uF 2 1
PD+3.3V KP-1608SURC [OCT_4]
PDGND LED15
16

IC9 2 1 KP-1608SURC [OCT_3]

R33 EXB28V471JX LED14
RA16
VDD

100k 15 1 8 LQA11 2 1 KP-1608SURC [OCT_2]

Q11 14 2 7 LQA10
LDA 2 Q10 13 3 6 LQA9 LED13
DATA Q9 12 4 5 LQA8 2 1
LCLK 3 Q8 11 1 8 LQA7 KP-1608SURC [OCT_1]
CLOCK Q7 10 2 7 LQA6 LED12
Q6 9 3 6 LQA5 2 1
Q5 8 4 5 LQA4 KP-1608SURC [OCT+]
VIL<0.3VDD Q4 7 1 8 LQA3 LED4
Q3 6 2 7 LQA2 2 1
VIH>0.7VDD Q2 5 3 6 LQA1 KP-1608SURC [OCT-]
LED3
VSS

Q1 4 4 5 LQA0
Q0 EXB28V471JX 2 1 KP-1608SURC [TRANSPOSE]
BU2090F-E2 RA15 LED7
EXB28V471JX
1

RA14 2 1 KP-1608SURC [PITCH] PD+5V R2 CD+5V 2

PDGND LED8 220
Qn:OpenDrain 25mAmax. 2 1 KP-1608SURC [VOLUME]
LED9 Q1
ON:L(Sink 3.0mA/port) 2 1 3 SSM3J108TU (TE85L)
KP-1608SURC [ASGN.] C1 2
OFF:HiZ LED10 0.1uF 1
R3 XDB_BOOT
R1 100k 100k
1
1/2W 10

C75 C72
R47

PD+3.3V PD+3.3V PD+3.3V 2 SSM3J108TU (TE85L)

0.1uF 0.1uF PN01 Q3 R49
DBGND PDGND DBGND PDGND
C69 C70 C71 UnPop 2 3 10 1/2W PN03
0.1uF 0.1uF 0.1uF C73 C77 C76
1
PN02

220uF 220uF R48 R50

PDGND PDGND PDGND 0.1uF 16V 16V
100k 10 1/2W
3

DBGND PDGND
LED20
1

DB_PLS 1
Q4 TLN233 (F)
2

DTC114EUAT106(PB FREE)
DBGND

18
 Sep. 2012 A-49-BK, A-49-WH

fig.d-panel.eps@R

PD+5V
CN5 C68
TP60 0.1uF
22
TP62 21 DBGND
20 SS0
TP64 19 SS1 SW
TP65 18 SS2
TP66 17 SS3 SCAN [~12]
To MAIN BOARD TP67
TP68
TP69
16
15 SD0
SD1 (H-Active)
14 SD2
TP70 13 LCLK
TP71 12 LDA
PD+3.3V TP72 11 LDB
TP73 10 DB_PLS
TP74 9 AD_C1
RK09D1130A0V

VR1 (L=20mm) TP75 8 AD_C2 PD+3.3V

TP76 7
3

50kB TP77 6 MOD_V

TP78 5 BEND_V
2 6 TP79 4 C67
C56 R60 TP80
1

7 AD_C1 3 0.1uF
PD+3.3V 0.1uF 5 TP81 2
100 1 PDGND
IC11 22FMN-SMT-A-TF (LF)(SN) PDGND
8

IC11 AD_DB
C74 PDGND PDGND AK2923H-E2
(SMD ANGLE Type)
0.1uF (SOLDER SIDE)
AK2923H-E2 PD+3.3V
4

CN4 PD+3.3V
RK09D1130A0V

PDGND VR2 (L=20mm) 1 BEND

TP82
3

50kB TP83 2 MOD

BENDER UNIT TP84 3
2 TP85 4
C57 2
1

1 R59
0.1uF AD_C2 B4B-PH-K-S (LF)(SN) PDGND
3
IC11 100
AK2923H-E2 (SOLDER SIDE)
PDGND PDGND
PD+3.3V
R52
D10 D12 100k IC5
3

KDS122 KDS122 6 R55

2 1 R51 7 BEND_V
CD+5V 1 2 BEND 5
D9 100
3

1 D13 1k AK2923H-E2
KDS122 R39 3.9k PD+3.3V C65
2 1 R43 2.2k 1 KDS122
2
2

1000pF
IC7
8

R40 470k
3

IC5 PDGND
3

TPS611 (F) R44 3.9k PD+3.3V D11 C64

1

R37 C58 22pF KDS122 0.1uF

C59 22pF 1 2 AK2923H-E2
100 PD+3.3V
4

2 C60 0.1uF R61 PDGND

1 6
3

3 7 R46 R54
1k 5 AD_DB PDGND IC5
R38

IC6 100k 2
150

PDGND IC6 220 1 R56

NJM4580M(TE3) R53 MOD_V
3
R42

R41

R45

NJM4580M(TE3) MOD
220

56k

100
1k

1k AK2923H-E2
PDGND C66
PD+5V A-4.5V 1000pF
PDGND PDGND
C61 PDGND
8

0.1uF IC6

NJM4580M(TE3) SS0 SS1 SS2 SS3

4

PDGND C62 [PITCH] D5 [VOLUME] [ASSIGNABLE] KDS184D6 RTK/P [TRANSPOSE]

11 12 KDS184 RTK/P 11 12 11 12 11 12
0.1uF A-4.5V 21 22 1 2 21 22 21 22 1 2 21 22
SW8 SW9 SW10 SW7
3

CARBON_SW WDT05-2 CARBON_SW WDT05-2 CARBON_SW WDT05-2 CARBON_SW WDT05-1

SD0
TP86 TP91 TP89 TP94
[S1] D4 [S2] [OCT-] D7 [OCT+]
11 12 KDS184 RTK/P 11 12 11 12 KDS184 RTK/P 11 12
21 22 1 2 21 22 21 22 1 2 21 22
SW1 SW2 SW3 SW4
3

CARBON_SW WDT05-1 CARBON_SW WDT05-1 CARBON_SW WDT05-1 CARBON_SW WDT05-1

SD1
TP87 TP92 TP90 TP95
[FUNCTION] D8
11 12 KDS184 RTK/P [SUPERNATURAL]
11 12
21 22 1 2 21 22
SW5 SW6
3

CARBON_SW WDT05-1 CARBON_SW WDT05-1

SD2
TP88 TP93
SW1~7 SW8~10

19