Limited Edition Wireless Dolby ®

Surround Sound Gaming Headset

WIRELESS
For: Xbox 360® I PS3™ I Mobile

User Guide
Congratulations on your purchase of the Call of Duty® Ghosts Ear Force® Phantom from Turtle Beach. You
now have in your possession a premium product that will bring your gaming experience to a whole new level,
heightening your senses, sharpening your reflexes and enhancing your communications. Welcome to excellence!

download game optimized presets

http://www.tURtlebeach.com/presets Customize your own presets using tools available on our website.
Table of Contents
Package Contents 4

Feature/Function Map (Location of controls/inputs) 5

Setting Up (Connections etc.) 7

Xbox 360 E + HD Audio Converter 8

Pairing Instructions 9

Xbox 360 Chat Setup 10

Xbox 360 System Settings Configuration 11

Playstation 3 Chat Setup 12

Playstation 3 System Settings Configuration 13

Surround Sound Settings 14

Bluetooth® Settings 15

Phone Settings 16

Recharging 17

Presets and Modes 18

Presets/Specifications 20

Mobile Device Cable 21

Regulatory Compliance 22

Declaration of Conformity 24

European Community Declaration of Conformity 25

Warranty 26
Package Contents

Ear Force® Phantom RF Transmitter Xbox Bluetooth Adapter Mobile Device Cable
Headset with
Detachable Microphone (XBA)

Headset Charging Cable Digital Optical Cable USB Transmitter USB Data Cable
Power Cable

Presets Reference Quick Start Guide Turtle Beach Sticker

4
Feature/Function Map (Location of controls/inputs)

Headset

1. Mode
2.  Power/Pair
3.  Game Presets 1 2 3 4 5 6 7
4. Chat/Mic. Presets
5.  Programmable Control
(Mic. Monitor by default)
6. Xbox 360 Talkback Cable/
Mobile Device Cable Jack
7.  Game Volume Control

Left Earcup

8.  Bluetooth Volume Control +

9.  Bluetooth Volume Control -
8 9 10 11 12 13 14
10. Bluetooth LED
11. Bluetooth Multi Function
Button(MFB)/Pair
12. Mic. Mute
13. Charge Status LED
BT

14. USB Port

VO
L+

BT
VO
L-

Right Earcup

5
Feature/Function Map (Location of controls/inputs)

RF Transmitter

IN

1 6 DIGITAL

OUT

2 L

7 LINE IN

3 R

8 LINE IN
VOLUME

4 DC 5V

9
5

1. Power/Pairing LED and Button 6. DIGITAL IN/OUT

2. Digital Input LED 7. LINE IN (Left/Right)
3. Dolby Digital LED 8. LINE IN VOLUME Control
4. SURROUND ON/OFF Button 9. DC 5V Input
5. SURROUND ANGLES Button

6
Heading
Setting Up (Connections etc.)

RF Transmitter and Mic Boom Setup (PS3/Xbox 360)

1. Connect the optical cable from the DIGITAL OUT on

the console to the DIGITAL IN on the transmitter.
2. Connect the transmitter power cable from a USB
Port on your console to the DC 5V on the transmitter.
3. Insert Microphone Boom so the small triangle
on the boom faces toward the headset. CONSOLE

4. Power headset ON. Optical Cable DIGITAL OUT

- Press and hold Power button until LED turns solid. IN

- Listen for voice prompt, “Powering on”.

DIGITAL

OUT

LINE IN

1
LINE IN
VOLUME
CONSOLE
DC 5V
USB Transmitter Power Cable USB

* Original Xbox360 Models may require the Xbox360

Audio Adapter(Sold Separately).

2 3

7
Heading
Xbox 360 E + HD Audio Converter

Follow the diagram below to set up your Turtle Beach Phantom Headset with the Xbox 360 E.
Note: This setup should not be used on other versions of the Xbox 360 Console.

to HDMI IN port

FRONT

Xbox 360 E
*Ear Force HD Audio Converter Console

BACK

to OPTICAL to HDMI OUT port

OUT

HDMI Cable

Wall Plug IN

DIGITAL

to DIGITAL
OUT

Wall Outlet IN L

LINE IN

LINE IN
VOLUME

*Ear Force HD Audio Converter is available for purchase at Turtlebeach.com/HDAC

DC 5V

8
Pairing Instructions

Headset and Transmitter

The headset and transmitter are pre-paired out of the box. The instructions below are only necessary if pre-pairing
appears to have been lost.*

1. Headset should be powered OFF.

2. Press and hold Power/Pairing button on the transmitter for 5 seconds until the Power/Pairing LED flashes rapidly.
Release.

3. Press and hold Power button on the headset until the Power LED flashes rapidly. (The headset will announce “Pairing
headset.”) Release.

4.  Once your Turtle Beach Phantom headset has been paired successfully, the headset Power LED will blink once per
second and the transmitter’s Power/Pairing LED will light solid. A voice prompt will announce, “Headset paired.”

5 GHz WiFi
dual band wireless

* If pairing is unsuccessful on first attempt, please try again. It may take as many as five attempts to pair successfully.

9
Xbox 360 Chat Setup

Xbox360 Wireless Chat Settings

Your Turtle Beach Ear Force® Phantom headset is designed to work with Xbox 360 game consoles. For best performance,
use with official Microsoft® Xbox 360 controllers. In order to get ideal functionality from your headset, follow the directions
below.

XBA Functions I Fonctions XBA

Function Button Press LED

Power ON Single 1 blink/sec

XBA LED
Power OFF Hold 4 secs OFF

Mic MUTE Double Solid ON

XBA Button
Mic UNMUTE Double 1 blink/sec

Pairing Mode Hold 4 secs Rapid blink

(paired) 1 blink/sec
(not paired) 2 blinks/sec

1. Turn on Xbox 360 Controller and plug the XBA into the controller’s headset jack.

2. Power on your headset.

3. Make sure that your headset’s Bluetooth is powered OFF: If the Bluetooth LED is blinking at all, hold the Bluetooth
button (or “BT MFB”) for 4 seconds to power off the Bluetooth. (The Bluetooth LED will not be lit when the Bluetooth
is powered off.) 

4.  With the XBA powered OFF (XBA LED off), press and hold the button on the XBA for 4 seconds and let go when the XBA
begins to blink rapidly. (Your XBA is now in pairing mode.)

5.  Press and hold the Bluetooth button (BT MFB) on your headset until the LED blinks blue and red. (Your headset is now
in pairing mode, and a voice prompt in the headset will announce, “Pairing Bluetooth.”)

After a few seconds, the XBA and the headset will be paired, and a voice prompt will announce “Bluetooth paired.”
The headset’s Bluetooth LED will blink blue once per second, and the XBA will blink once per second, indicating
that they’re paired.

10
Xbox 360 System Settings Configuration

Xbox 360 Configuration

Voice
Digital Output
Voice Volume 10
Current Setting
Digital Stereo Dolby Digital
Game Volume 10
Dolby Digital 5.1 Choose the digital output
type for your system.
Dolby Digital 5.1 with WMA Pro
This setting only applies
to optical digital and HDMI Mute Kinect
audio outputs.

Voice Output
Play Through Headset
Play Through Speakers
Play Through Both
Select Back

1. Go to Xbox 360 Settings 2. Go back to Xbox 360 Settings

- Choose “System Settings” - Choose “Preferences”
- Choose “Console Settings” - Choose “Voice”
- Choose “Audio” - Set both Voice Volume and Game Volume to “10”
- Set “Digital Output” to “Dolby Digital 5.1” - Set Voice Output to “Play Through Headset”

11
PS3 Chat Setup

PS3 Bluetooth Configuration

Your Turtle Beach Ear Force® Phantom headset is designed to work with PS3 game consoles. In order to get ideal
functionality from your headset, follow the directions below.

0 12/14 12:15 PM

Register to manage Bluetooth devices such as

headsets, keyboards and mouse devices.

1. With the Phantom Bluetooth powered OFF, go to 3. On the Phantom headset, press and hold the BT MFB
the PS3 Menu and select “Settings” > “Accessory for 5 seconds until the Bluetooth LED starts flashing
Settings” > “Manage Bluetooth Devices” blue and red.
2. If you have never used a Bluetooth device or have 4. When the PS3 is finished scanning, it will prompt you
deleted any profiles from other devices previously used to select the Bluetooth device. Select “Turtle Beach
with your console, the PS3 prompt will ask if you wish Phantom” from the list.
to register a device. Choose “Yes” to start scanning. 5. Enter “0000” as the Pass Key and select “OK”. The
If any other Bluetooth devices have previously been Bluetooth LED on the headset will flash blue about
paired with your console they will appear in alist. once per second, indicating that the Bluetooth has
Choose “Start Scanning” at the bottom of the screen. paired to your PS3.

PS3 Chat Settings

Audio Device Settings 1. Go to PS3 Settings

- Choose “Accessory Settings”
- Set “Input Device” to “Turtle Beach Phantom”
- Set “Output Device” to “Turtle Beach Phantom”
Microphone Level 3
Note: You will not be able to set the Phantom as
Input Device TURTLE BEACH PHANTOM
your input or Output Device until you follow the
Output Device TURTLE BEACH PHANTOM
steps under “PS3 Bluetooth Configuration”.
OK
2. Set Microphone Level to 3 or 4
X Enter Back

12
PS3 System Settings Configuration

PS3 Audio Output Settings

0 12/14 12:15 PM
Audio Output Settings

Select the connector on the TV or AV amplifier (receiver). Audio Output Settings

On
Sets to output audio through multiple connectors
simultaneously. Audio output to connectors that are
not selected in [Audio Output Settings] is downscaled
to 2 Ch.

Turn on the power of the connected device.

Cancel

1. Go to Settings 2. Go to Settings

- Choose “Sound Settings” - Choose “Sound Settings”
- Choose “Audio Output Settings” - Choose “Audio Multi-Output” and set to “On”
- Choose “Optical Digital”
- Choose “Dolby Digital 5.1 Ch.”
- Make sure “DTS 5.1 Ch.” is NOT checked.

13
 Surround Sound Settings

Surround Sound Settings

Surround Sound Set Up

Turtle Beach Ear Force® Phantom headsets have a surround sound feature
bringing additional realism to your gaming experience. 3
1
1. Press SURROUND ON/OFF to turn ON the surround sound function.
2. Press the SURROUND ANGLES button on the transmitter to scroll
2
through six (6) different presets.
3. The bottom 3 LEDs on the transmitter will blink in sequence to indicate
which preset was selected. (The number of blinks indicates which
number Surround Sound Angle is Selected.)

135o 135o
RR RL
RR RL
RR RL 120o 120o
C

105o 105o

FR FL FR FL
30o FR FL 30o 45o 45o 45o 45o

Front Angle; 30 degrees Front Angle; 45 degrees Front Angle; 45 degrees

1 Rear Angle; 105 degrees 2 Rear Angle; 120 degrees 3 Rear Angle; 135 degrees

150 150
135o 135o
RR RL
RR RL
RR RL
120o 120o
60o 60o 60o 60o 60o 60o
FR FL FR FL FR FL

Front Angle; 60 degrees Front Angle; 60 degrees Front Angle; 60 degrees

4 Rear Angle; 120 degrees
5 Rear Angle; 135 degrees
6 Rear Angle; 150 degrees

14
Bluetooth® Settings

Pairing (Bluetooth) with a phone

1. Turn Headset ON.

2. Press and hold Bluetooth MFB Button until LED
flashes Blue and Red. Bluetooth MFB
3. Set mobile phone to Bluetooth search mode.*
4. Choose “Turtle Beach Phantom.”
5. When prompted for a passcode, enter “0000.”
BT

Mobile Phone
VO
L+

BT
VO
L- via Bluetooth

Dual Bluetooth Pairing

The Turtle Beach Ear Force® Phantom headset can pair with two Bluetooth devices at once. This feature allows for on-line
chat with other gamers and the ability to switch to phone calls instantly. After your Phantom headset is paired with one
device (XBA or PS3), follow the instructions below for dual Bluetooth pairing.

1. Turn off Phantom Bluetooth by holding the headset’s Bluetooth MFB for 4 seconds.
(A voice prompt will announce, “Bluetooth powering off.”)
2. Press and hold Bluetooth Button until LED flashes Blue and Red.
(A voice prompt will announce, “Bluetooth powering on,“ then “Pairing Bluetooth.”)
3. Set device to Bluetooth search mode.*
4. Choose “Turtle Beach Phantom.”
5. When prompted for a passcode, enter “0000.”
(A voice prompt will announce, “Bluetooth Paired.”)

* Your mobile device may operate differently. Refer to the user’s guide for your mobile device.

15
Phone Settings

When your Ear Force® Phantom headset is paired with your cell phone, you can make and receive calls. It can also be
used with voice dialing if your phone has a voice dialing function:

Making Calls

To make voice-dialed calls, press and hold the BT MFB button for two (2) seconds until you hear a tone. Release the
•

button and the voice recognition function on your phone will be activated. Speak the name of the person you wish to call.
To de-activate the voice dialing function, press and hold the BT MFB button again for two (2) seconds and release.

To make dialed calls, use the number keys on your phone to dial the number. When the call connects, it will
•

automatically be heard through the headset.

To redial, press the BT MFB button twice to hear two tones through the headset. The last number dialed will be dialed again.
•

To speak off-line while using the phone function, press the MUTE button. While the microphone is muted, a tone will
•

sound every 30 seconds. To de-activate the mute function, press the MUTE button again.

Note: If your phone does not have a redial feature, double clicking on the BT MFB button will initiate the voice dialing
function instead. If your phone has neither the redial nor voice dial functions, a double click on the BT MFB button will
have no effect.

Receiving Calls

You will hear a musical chime when there is an incoming call. Follow the instructions below to answer a call.

When receiving calls, a phone ring will sound through the headset. Press the BT MFB button to answer the call.
•

To reject an incoming call, press and hold the BT MFB button for two (2) seconds until you hear a beep. The call will
•

go to voicemail.
• You can also ignore the incoming call ring until it stops. This call will also go to voicemail.

16
Recharging

Headset Recharging

Turtle Beach Ear Force® Phantom headsets feature a rechargeable battery enabling continuous gaming for up to 15
hours. When the headset battery charge is low, a tone will sound every ten (10) seconds. The headset can be charged
without interrupting game-play using the included Headset Charging Cable.

Charging LED Headset Charging Port

Right Earcup

Charging cycle: 6 hours.

The headset will always remain powered on while charging. The LED on the headset will remain a solid RED until the
headset is fully charged, at which point the LED will turn off.

NOTE: The Headset Charging Cable is for charging purposes only. Use the USB Programming Cable for uploading presets.

17
Headingand Modes
Presets

Tune your Ear Force® Phantom headset with modes for music, movies and games. It also features several built-in
presets for chat or voice effects.

Game Mode
Multi-channel immersion while optimizing for competitive play.

Choose from the following Game Presets:

Main: Incorporates Dolby® surround sound processing for an immersive audio experience.
1. Flat: Hear stereo game sound without effects processing or Dolby Surround Sound.
2. Bass Boost: Hear and feel the rumble of deeper bass sound effects.
3. Treble Boost: Boost high frequencies for crisper sounds and greater clarity.
4. Bass Boost + Treble Boost: Rumbling lows and pristine highs come through clearly.
5. Stereo Expander: Stereo processing with a 3D effect that allows you to focus on subtle audio cues.
6. Action Enhancer: Amplify intense sounds from weapons and explosions.
7. Footstep Focus: Focus on the sound of enemy footsteps approaching.
8. Superhuman Hearing: Boosts low volume sounds.

Movie Mode
Multi-channel immersion into the action.

Music Mode
Optimal stereo processing for concert-like sound.

Chat Presets
Chat presets can be used regardless of what mode you are using.

Choose from the following Chat Presets:

Main: Chat Boost automatically increases the online chat levels during intense gaming sequences, so communication
from teammates isn’t drowned out.
1. Flat: Straight chat with no processing.
2. Chat Focus: Boosts mid-range frequencies for greater concentration on chat.
3. Chat Expander: Widens the virtual sound field of chat.
4. Voice Amp: Amplifies chat volume.
5. Hi-Pitch Morph: Morph your voice into a high-pitch tone.
6. Lo-Pitch Morph: Bring your voice to demonic depths.
7. Robot: Transform your voice into a metallic sound.
8. Max Chat: Combines presets in an enhanced chat package.

18
Presets and Modes

Navigating through Presets and Modes

Tap the Game/Chat Preset buttons to cycle through your alternate (1-8) Game/Chat Presets.
•

Hold the Game Presets Button for 1 second to switch to your Main Game Preset.
•

Hold the Chat/Mic Presets Button for 1 second to switch to your Main Chat Preset.
•

Tap the Mode Button to switch to your Main Game and Chat Presets simultaneously.
•

Hold the Mode Button for 1 second to toggle between Game, Movie, and Music mode.
•

Game and Chat /

Mic Presets
Mode Button

19
Presets/Specifications

Custom Presets

Plug your Ear Force® Phantom headset into your Windows computer to load custom presets available on our
website: www.TurtleBeach.com/presets. Refer to the “Advanced Sound Editor” available on our website
for detailed instructions.

Specifications

- Speaker Dimension: 50mm

- Speaker core: Neodymium magnets
- Speaker Impedance: 32Ω
- Speaker Frequency Response: 20Hz - 20KHz

- Headphone Amplifier: stereo
- Output Power: 5mW/ch @ 32 ohm

- Earcup Style: Around Ear
- Cushion material: Foam
- Earcushion Material: Protein Leather

- Headband Design: Metal
- Headband cushion: Foam
- Headband Materia: Fabric/Leather

- Acoustic design: Closed
- Acoustic FR: 20Hz - 20KHz
- Sound Pressure Level: 120dB @1KHz
- Total Harmonic Distortion: < 0.1%

20
HeadingDevice Cable
Mobile

This cable allows you to listen to stereo audio using any standard headphone jack. Connect your headset’s Xbox 360 Input
Jack to the 3.5mm jack on your audio device (MP3 player, smart phone, tablet, or computer) using the Mobile Device Cable.
This mode can be used when:
1. Your headset is turned on and not connected to your transmitter (headset blinking twice per second). This can be
achieved by disconnecting power to the transmitter or moving your headset out of transmitter range..
2. Bluetooth is not in use
Note: When in this mode there is no Mic functionality. You can remove the Mic boom if you wish.

21
Regulatory Compliance

Federal Communications Commission (FCC) Compliance Notices

This section includes the following FCC statements for the EAR FORCE® Phantom RX & TX Models:
- FCC ID: XGB-TB3290 & XGB-TB2291A
- Class B Interference Statement
- RF Radiation Exposure & Hazard Warning
- Non-Modification Statement
- Deployment Statement

Class B Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

FCC Caution:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any interference received, including interference that may cause
undesired operation.

RF Radiation Exposure & Hazard Statement

To ensure compliance with FCC RF exposure requirements, this device must be installed in a location such that the antenna of
the device will be greater than 20 cm (8 in.) from all persons. Using higher gain antennas and types of antennas not covered
under the FCC certification of this product is not allowed. Installers of the radio and end users of the product must adhere to the
installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with any
other antenna or transmitter.

Non-Modification Statement
Use only the supplied internal antenna. Unauthorized antennas, modifications, or attachments could damage the EAR FORCE®
PHANTOM RX & TX Models and violate FCC regulations. Any changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate this equipment. Please contact Turtle Beach for a list of
approved 2.4 GHz and 5.0 GHz antennas.

Deployment Statement
This product is certified for indoor deployment only in the 5150 – 5250 MHz band. Do not install or use this product outdoors in
that frequency band in the United States.

22
Regulatory Compliance

Canadian ICES Statements

IC: 3879A- 3290, 3879A-2291A
This device complies with ICES-003 and RSS-210 of Industry Canada.
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Ce dispositif est conforme aux normes NMB003 et CNR-210 d’Industrie Canada.

1. L’utilisation de ce dispositif est autorisée seulement aux conditions suivantes :
2. Il ne doit pas produire de brouillage et l’utilisateur du dispositif doit être prêt à accepter tout brouillage radioélectrique reçu,
même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.

To prevent radio interference to the licensed service (i.e. co-channel Mobile Satellite systems) this device is intended to be
operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is installed
outdoors is subject to licensing and not supported by EAR FORCE® PHANTOM RX & TX Models.

RF Radiation Exposure & Hazard Statement

To ensure compliance with RSS-102 RF exposure requirements, this device must be installed in a location such that the antenna
of the device will be greater than 20 cm (8 in.) away from all persons. Using higher gain antennas and types of antennas not
covered under the IC certification of this product is not allowed. Installers of the radio and end users of the product must adhere
to the installation instructions provided in this manual. This transmitter must not be co-located or operated in conjunction with
any other antenna or transmitter.

Exposition aux radiations RF & Mention de danger

Pour assurer la conformité avec les exigences RSS-102 d’exposition aux RF (Radio Fréquences), cet appareil doit être installé
dans un endroit ou l’antenne de l’appareil sera située à une distance de plus de 20 cm (8 po) de toutes personnes. L’utilisation
d’antennes à gain plus élevé et les types d’antennes qui ne sont pas couverts en vertu de la certification IC de ce produit
n’est pas autorisée. Les installateurs de la radio et les utilisateurs du produit final doivent se conformer aux instructions
d’installation fournies dans ce manuel. Cet émetteur ne doit pas être co-implanté ou exploité en conjonction avec toute autre
antenne ou transmetteur.

Deployment Statement
This product is certified for indoor deployment only in the 5150 – 5250 MHz band. Do not install or use this product outdoors in
that frequency band in Canada.

Déclaration de déploiement
Ce produit est certifié pour le déploiement à l’intérieur tout en rencontrant les limites de cette bande de fréquences: 5150 - 5250
MHz. Ne pas installer ou utiliser ce produit à l’extérieur au Canada, si cette bande de fréquences ne peut ne peut être rencontrée.

European Union and European Fair Trade Association Regulatory Compliance

This equipment may be operated in the countries that comprise the member countries of the European Union and the European
Fair Trade Association. These countries, listed below, are referred to as The European Community throughout this document:
AUSTRIA, BELGIUM, BULGARIA, CYPRUS, CZECH REPUBLIC, DENMARK, ESTONIA, FINLAND, FRANCE, GERMANY, GREECE,
HUNGARY, ICELAND, IRELAND, ITALY, LATVIA, LICHTENSTEIN, LITHUANIA, LUXEMBOURG, MALTA, NETHERLANDS, NORWAY,
POLAND, PORTUGAL, ROMANIA, SLOVAKIA, SLOVENIA, SPAIN, SWEDEN, SWITZERLAND, UNITED KINGDOM.

The EAR FORCE® PHANTOM RX & TX devices communicate with each other to provide wireless local area networking (WLAN)
capabilities. Additionally, the EAR FORCE® PHANTOM RX device has a BT radio transceiver for communicating with users
over the internet connection provided in the host platform. The EAR FORCE® PHANTOM TX Model includes one 802.11a and
one 802.11b/g radio with one 802.11a and one 802.11b/g omni-directional internal antennas, respectively. The EAR FORCE®
PHANTOM RX Model includes one 802.11a, one 802.11b/g radio and one 2.4 GHz BT radio with one 802.11a, one 802.11b/g and
one 2.4 GHz BT omni-directional internal antennas, respectively.

23
Declaration of Conformity

Marking by this symbol:

indicates compliance with the Essential Requirements of the R&TTE Directive of the European Union (1999/5/EC). This
equipment meets the following conformance standards:

Safety: EN 60950-1: 2006 + A11 (GS License)

Also Licensed for Standards: IEC 60950-1:2005, (CB Scheme Report/Certificate), UL60950-1 (NRTL License), CSA22.2, 60950-1
(SCC License)
Additional licenses issued for specific countries available on request.

EMC: EN 55022: 2006, EN 55024: 1998 + A1:2001 + A2: 2003, EN 301 489-1 v1.8.1 (2008-04), EN 301 489-17 v2.1.1 (2009-05),
CISPR22: 2005, CISPR24
Including EN 61000-3-2, -3-3, -4-2, -4-3, -4-4, -4-5, -4-6 and -4-11
The products are licensed, as required, for additional country specific standards for the International Marketplace. Additional
issued licenses available upon request.

Radio: EN 300328 v.1.7.1 (2006-10) & EN 301 893 v.1.5.1 (2008-12)

Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband transmission systems; Data transmission
equipment operating in the 2,4 GHz ISM band and using wide band modulation techniques and Broadband Radio Access
Networks (BRAN); 5 GHz high performance RLAN. Certifications are harmonized to the EN standards covering essential
requirements under article 3.2 of the R&TTE Directive. Compliance includes testing with antennas as specified in attached table.

SAR: EN 62311: 2008

Environmental: Low Voltage Directive 2006/95/EC,

RoHS 2002/95/EC
WEEE 2002/96/EC

24
European Community Declaration of Conformity
Bulgaria български С това, nortel обявява, че този модел на радио на Product A, е със съгласие с
съществените изисквания и други важни условия на директива 1999/5 на европейски
съюз
Czech Èesky Norteltímto prohlašuje, že tento Product A, je ve shodì se základními požadavky a dalšími
Republic pøíslušnými ustanoveními smìrnice 1999/5/ES.
Denmark Dansk Undertegnede Nortelerklærer herved, at følgende udstyr Product A, overholder de
væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
English English Hereby, Nortel declares that this Product A, is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Estonia Eesti Käesolevaga kinnitab Nortelseadme Product A, vastavust direktiivi 1999/5/EÜ
põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
Finland Suomi Nortelvakuuttaa täten että Product A, tyyppinen laite on direktiivin 1999/5/EY oleellisten
vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
France Français Par la présente Norteldéclare que l’appareil Product A, est conforme aux exigencies
essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
German Deutsch Hiermit erklärt Nortel., dass sich das Gerät Product A, in Übereinstimmung mit den
grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der
Richtlinie 1999/5/EG befindet.
Greece Ελληνική ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Nortel.ΗΛ.ΝΕΙ ΟΤΙ Product A, ΣΥΜΜΟΡΦ.ΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙ..
ΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ .ΙΑΤΑΞΕΙΣ ΤΗΣ Ο.ΗΓΙΑΣ 1999/5/ΕΚ.
Hungary Magyar Alulírott, Nortelnyilatkozom, hogy a Product A, megfelel a vonatkozó alapvetõ
követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Italy Italiano Con la presente Norteldichiara che questo Product A, è conforme ai requisiti essenziali ed
alle alter disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latvia Latviski Ar šo Norteldeklarç, ka Product A, atbilst Direktîvas 1999/5/EK bûtiskajâm prasîbâm un
citiem ar to saistîtajiem noteikumiem.
Lithuania Lietuviø Šiuo Norteldeklaruoja, kad šis Product A, atitinka esminius reikalavimus ir kitas 1999/5/
EB Direktyvos nuostatas.
Malta Malti Hawnhekk, Nortel., jiddikjara li dan Product A, jikkonforma mal-tiijiet essenzjali u ma
provvedimenti orajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Netherlands Netherlands Hierbij verklaart Norteldat het toestel Product A, in overeenstemming is met de
essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG
Poland Polski Niniejszym Nortelooewiadcza, ¿e Product A, jest zgodny z zasadniczymi wymogami oraz
pozosta³ymi stosownymi postanowieniami Dyrektywy 1999/5/EC.
Portugal Português Norteldeclara que este Product A, está conforme com os requisitos essenciais e outras
disposições da Directiva 1999/5/CE.
Romania Român Astfel, Nortel declarã acel acest WLAN Radio Model 2332, este în conformitate cu
cerinþele necesare ºi proviziile alte semnificative de Directive 1999 5 EC.
Slovakia Slovensky Norteltýmto vyhlasuje, že Product A spåòa základné požiadavky a všetky príslušné
ustanovenia Smernice 1999/5/ES.
Slovenia Slovensko Nortelizjavlja, da je ta Product A, v skladu z bistvenimi zahtevami in ostalimi relevantnimi
doloèili directive 1999/5/ES.
Spain Español Por medio de la presente, Nortel declara que el Producto A, cumple con los requisitos
esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Sweden Svenska Härmed intygar Nortelatt denna Product A, står I överensstämmelse med de väsentliga
egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG.

25
LIMITED ONE YEAR WARRANTY FOR TURTLE BEACH PRODUCTS:

Voyetra Turtle Beach, Inc. (“VTB”) warrants to the original end-user purchaser (“Purchaser”) that the retail Turtle Beach hardware product herein (“Product”) will be free of defects
in materials and workmanship for a period of one year from the date of purchase by the Purchaser (“Warranty Period”). Any Extended Warranty or Service Plans purchased through a
Retail store are not honored by VTB. The Warranty refers to the repair/replacement of a defective product during this period and not a refund.

This limited warranty is extended only to the original Purchaser of a new product, which was not sold “AS IS”. It is not transferable or assignable to any subsequent purchaser. This
limited warranty is applicable only in the country or territory where the Product was purchased from an authorized VTB retailer and does not apply to a Product that has been purchased
as used or refurbished or was included as part of a non-VTB product.

WARRANTY SERVICE:
In the USA and CANADA Warranty Service is provided by our Turtle Beach USA offices and in all other Countries it is provided by our local International Distributors when available.
Refurbished/Recertified products are sold on an AS IS basis with a 90-day Warranty or less in accordance with each vendor’s policy.

VTB does not warrant uninterrupted or error-free operation of the Product and is under no obligation to support the Product for all computer operating systems or future versions of
such operating systems.

If a defect should occur during the Warranty Period, Purchaser must contact VTB to obtain a Return Merchandise Authorization (“RMA”) number on the basis of the dated purchase
receipt. Purchaser will be responsible for shipping costs incurred in returning the defective Product to an authorized VTB service center, or to the repair facility located at VTB’s
corporate headquarters. VTB will not be responsible for other products or accessories included with the defective Product sent to VTB. The RMA number must be clearly indicated on the
outside of the package. Packages without an RMA number will be refused by VTB or its representatives and returned to sender at the sender’s expense.

In the event of a defect, Purchaser’s sole and exclusive remedy, and VTB’s sole liability, is expressly limited to the correction of the defect by adjustment, repair, or replacement of the
Product at VTB’s sole option and expense. VTB owns all Products it has replaced and all parts removed from repaired Products. VTB uses new and reconditioned parts made by various
manufacturers in performing warranty repairs and building replacement products. If VTB repairs or replaces a product, the original Warranty Period is not extended, however, VTB
warrants that repaired or replacement parts will be free from defects in material and workmanship for a period of thirty (30) days from the date of repair or replacement, or for the
remainder of the Warranty Period, whichever is greater.

This warranty does not apply to any Product that has had its serial number altered, removed or defaced, or any Product damage caused by shipping, improper storage, accident,
problems with electrical power, abuse, misuse, neglect, ordinary wear, acts of God (e.g. flood), failure to follow directions, improper maintenance, use not in accordance with product
instructions, unauthorized modification or service of the Product or damage resulting from the use of the Product with hardware, software or other products not provided by or
specifically recommended by VTB.

NOTES:
- Replacement Parts and accessories that are subject to “wear and tear” such as earpads, mic foam covers, talkback cables, etc. have a three (3) month Warranty.
- Replacement Parts for Discontinued Products are sold on an AS IS basis, they are not supported and come with a 30 day Warranty.

THIS LIMITED WARRANTY IS PURCHASER’S SOLE AND EXCLUSIVE REMEDY AND IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED. TO THE EXTENT PERMITTED BY
APPLICABLE LAW, VTB HEREBY DISCLAIMS THE APPLICABILITY OF ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE FOR THE
PRODUCT. IF SUCH A DISCLAIMER IS PROHIBITED BY APPLICABLE LAW, THE IMPLIED WARRANTY IS LIMITED TO THE DURATION OF THE FOREGOING LIMITED WRITTEN WARRANTY.

IN NO EVENT SHALL VTB BE LIABLE FOR ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, OR DAMAGES, INCLUDING BUT NOT LIMITED TO ANY
LOST PROFITS, DATA, OR LOSS OF USE, ANY THIRD PARTY CLAIMS, AND ANY INJURY TO PROPERTY OR BODILY INJURY (INCLUDING DEATH) TO ANY PERSON, ARISING FROM OR
RELATING TO THE USE OF THIS PRODUCT OR ARISING FROM BREACH OF THE WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR STRICT LIABILITY, EVEN IF VTB HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

This warranty supersedes all prior agreements or understandings, oral or written, relating to the Product, and no representation, promise or condition not contained herein will modify
these terms. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives
you specific legal rights. You may also have other rights, which vary from state to state. Any action or lawsuit for breach of warranty must be commenced within eighteen (18) months
following the purchase of the Product.

EXCLUSIONS FROM LIMITED WARRANTY:

This Limited Warranty shall not apply and VTB has no liability under this Limited Warranty if the Turtle Beach Product:
- is used for commercial purposes such as “LAN, Call Centers” (including rental or lease);
- is modified or tampered with;
- is damaged by Acts of God, power surge, misuse, abuse, negligence, accident, wear and tear, mishandling, misapplication, or other causes unrelated to defective materials or
workmanship;
- serial number is defaced, altered or removed;
- is not used in accordance with the documentation and use instructions; or
- is repaired, modified or altered by other than authorized repair centers.
- Product is no longer available because it was discarded.

26
 For: Xbox 360® I PS3™ I Mobile

Watch Turtle Beach product training videos at: product support and warranty information:
youtube.com/TurtleBeachVideos TurtleBeach.com/support

Copyright © 2013 Voyetra Turtle Beach, Inc. (VTB, Inc.) All rights reserved. Turtle Beach, the Turtle Beach Logo, Voyetra, and Ear Force are either trademarks or reg-
istered trademarks of VTB, Inc. Xbox, Xbox 360, and Xbox LIVE are registered trademarks of Microsoft Corporation. Playstation is a registered trademark and PS3 is
a trademark of Sony Computer Entertainment, Inc. Mac is a registered trademark of Apple, Inc. Bluetooth is a registered trademark of SIG, Inc. All Rights Reserved.
Dolby and the double-D symbol are trademarks of Dolby Laboratories. All other trademarks are properties of their respective companies and are hereby acknowl-
edged. Actual product appearance may differ from package imagery.

© 2013 Activision Publishing, Inc. ACTIVISION, CALL OF DUTY, and CALL OF DUTY GHOSTS are trademarks of Activision Publishing, Inc.
All other trademarks and trade names are the properties of their respective owners.

This product is compliant with the Consumer Product Safety Improvement Act of
2008, Public Law 110-314 (CPSIA)