This document provides a 3-step design for a two-way restrained corner slab. Step 1 calculates loading as 12.68 kN/m width. Step 2 analyzes moments at different positions. Step 3 designs reinforcement at each position: Position 1 and 4 require 10mm bars at 200mm c/c. Position 2 requires 8mm bars at 160mm c/c. Position 3 and 5, with lower moments, require minimum reinforcement of 8mm bars at 200mm c/c. Reinforcement is designed to satisfy strength and minimum requirements.
This document provides a 3-step design for a two-way restrained corner slab. Step 1 calculates loading as 12.68 kN/m width. Step 2 analyzes moments at different positions. Step 3 designs reinforcement at each position: Position 1 and 4 require 10mm bars at 200mm c/c. Position 2 requires 8mm bars at 160mm c/c. Position 3 and 5, with lower moments, require minimum reinforcement of 8mm bars at 200mm c/c. Reinforcement is designed to satisfy strength and minimum requirements.
This document provides a 3-step design for a two-way restrained corner slab. Step 1 calculates loading as 12.68 kN/m width. Step 2 analyzes moments at different positions. Step 3 designs reinforcement at each position: Position 1 and 4 require 10mm bars at 200mm c/c. Position 2 requires 8mm bars at 160mm c/c. Position 3 and 5, with lower moments, require minimum reinforcement of 8mm bars at 200mm c/c. Reinforcement is designed to satisfy strength and minimum requirements.
This document provides a 3-step design for a two-way restrained corner slab. Step 1 calculates loading as 12.68 kN/m width. Step 2 analyzes moments at different positions. Step 3 designs reinforcement at each position: Position 1 and 4 require 10mm bars at 200mm c/c. Position 2 requires 8mm bars at 160mm c/c. Position 3 and 5, with lower moments, require minimum reinforcement of 8mm bars at 200mm c/c. Reinforcement is designed to satisfy strength and minimum requirements.
Download as XLSX, PDF, TXT or read online from Scribd
Download as xlsx, pdf, or txt
You are on page 1/ 4
6m 6m
Two way Restrained slab
Design the corner slab
6m
6m
Slab thickness = 180 mm
D.L = 6.2 kN/ m2 I. L = 2.5 kN/ m2 fcu = 35 N/ mm2 fy = 460 N/ mm2 concrete cover = 20 mm
X Y 3
5 2
Step 01 : Load Calculation
n = 1.4gk +1.6qk ly = 6.0 = 1
= 1.4 x 6.2 + 1.6 x 2.5 lx 6.0 n = 12.68 kN/ m width Step 02 : Analysis
Table 3.15 β1 = 0.047 β2 = 0.036 β4 = 0.047
m1 = β1 n l 2 x m2 = β2 n l 2 x = 0.047 x 12.68 x 6^2 = 0.036 x 12.68 x 6^2 m1 = 21.45 kNm / m width m2 = 16.43 kNm / m width m4 = 21.45 kNm / m width
Step 03 : Design Assuming 10 mm bars in use, (i) Position 1 & 4 d = 180 - 20 - 5 K = M/bd2fcu d = 155 mm = 21.45 x 10^6 10^3x 155^2 x 35 = 0.025 ˂ (K' = 0.156)
singly r/f design is applied.
z = 0.95 d = 0.95 x 155 z = 147.25 mm
Asreq = M/0.87fyz Table 3.27
= 21.45 x 10^6 Asmin = 0.13 Ac /100 0.87 x 460 x 147.25 = 0.13 x 1000 x 180 Asreq = 364 mm2/ 1m width 100 Asmin = 234 mm2/ 1m width
No.of bars = 364 / 78.54 minimum requirement of r/f is satisfied
