NUMERICAL SIMULATION OF SEMICONDUCTOR DEVICES WITH TCAD SENTAURUS

DESSIS

TCAD Sentaurus
www.synopsys.com

What is TCAD? Technology Computer Aided Design refers to using computer simulations to develop and optimize semiconductor processing technologies and devices. technologists (to optimize processes) researches (to explore the physical limits and device performances)
process engineers (to increase product yeld)

Device Simulation
Sentaurus simulates numerically the electrical behavior of a semiconductor device. It can be thought as a virtual measurement: terminal currents, voltages and charges are computed based on a set of physical device equations that describe the carrier distribution and the conduction mechanisms. The device is represented as a meshed finite element structure.
3

Tool flow: from device creation and meshing to device simulation PHASE 1: device creation and meshing
Device structures can be created by process simulation or by the structure editor.

Each device structure is described by two files: the grid (or geometry) file contains a description of the regions, boundaries, material types, location of the electrical contacts. the data (or doping) file contains the doping profiles.
5

Creating and meshing device structures using the structure editor Mdraw: By using the graphical user interface By editing the command_mdr.cmd and boundary_mdr.bnd files

the grid and doping files are generated by running the Mdraw mesher
6

The boundary_mdr.cmd file contains the definition of the regions, boundaries, material types, and location of the electrical contacts. The command_mdr.bnd file contains the definition of the doping masks, doping profile functions, and the meshing strategies. For maximum efficiency of a simulation, a mesh must be created with a minimum number of vertices to achive the required level of accuracy. It is recommended that to create the most suitable mesh, the mesh must be densest in those regions of the device where the following are expected: high current density, high electric fields, high charge generation. Generally, a total node count of 2000 to 4000 is reasonable for most 2D simulations.
7

Example: 2D DIODE diode.bnd

(40,0)

(40,7.5)

(74,7.5) (74,7.5) 8

diode.cmd
Title "2D DIODE" Profiles { constFunction "substrate"{ constValue = 1.0e+15 species = P line = {(-150 0) (150 0)} lateralFactor = 0 maxDistance = 8 } gaussFunction "buried-up"{ species = P line = {(84 7.5) (30 7.5)} peakValAndJunc = (peakvalue = 1.0e19 depth = 3.3 valueAtDepth = 1.0e+15) lateralerf }

diode.cmd
#### ### p-well #### gaussFunction "p-well"{ species = B line = {(43 0) (72 0)} peakValAndStdDev = (peakvalue = 1.0e18 stddev = 0.3) lateralerf } gaussFunction "contact"{ species = B line = {(42.95 0) (47.65 0)} line = {(67.45 0) (72.15 0)} peakValAndStdDev = (peakvalue = 2.0e20 stddev = 0.08) lateralerf } }

10

diode.cmd
Refinement { {top = -10 left = -150 bottom = 15 right = 150 MaxElementSize = 3 MinElementSize = 2} ##### active area refinement #buried layer {top = 0 left = 30 bottom = 13 right = 84 MaxElementWidth = 1 MaxElementHeight = 0.5 MinElementWidth = 0.8 MinElementHeight = 0.1}

11

diode.cmd
# P-well lateral {top = 0 left = 40 bottom = 4 right = 48 MaxElementWidth = 0.5 MaxElementHeight = 0.25 MinElementWidth = 0.04 MinElementHeight = 0.1} {top = 0 left = 67 bottom = 4 right = 74 MaxElementWidth = 0.5 MaxElementHeight = 0.25 MinElementWidth = 0.04 MinElementHeight = 0.1}

12

diode.cmd
# p-well active region {top = 0 left = 40 bottom = 4 right = 74 MaxElementWidth = 2 MaxElementHeight = 0.25 MinElementWidth = 0.2 MinElementHeight = 0.1} # p-n active region {top = 0.8 left = 43 bottom = 3 right = 72 MaxElementHeight = 0.1 MinElementHeight = 0.08} }

13

Creating and meshing device structures using the structure editor Mdraw: diode.bnd, diode.cmd For visualizing the device structure and doping: Tecplot is a plotting software with extensive 2D and 3D capabilities. It is used to explore and analyze data, to create informative 2D and 3D views, to create plots and animations.

diode_mdr.grd diode_mdr.dat

14

15

PHASE 2: device simulation

16

Simulation of the device using SentaurusD: By editing the command_des.cmd and parametername.par files

the current and plot files are generated by running the SentaurusD solver
17

The command_des.cmd file is organized in command or statement sections. It contains commands for input/output files, electrodes, physics, plots, math, equations to be solved. The parametername.par file contains user-defined values for model parameters (coefficients). The parameters in this file replace the default values. Features: different device geometries: 1D, 2D, 3D, and 2D cylindrical different equations to be solved: Poisson, drift-diffusion, thermodynamic and hydrodynamic models an extensive set of models for device physics and effects in smc mixed-mode support of netlists with mesh-based devices and SPICE cirucit models.
18

simulation.cmd
Electrode {{name="anode" {name="katode" voltage=0.0} voltage=0.0 resistance=1e4}}

File {grid="diode_mdr.grd" doping="diode_mdr.dat" current="output" output="output" plot="output" # save=output" # Param=parameters.par" }

19

simulation.cmd
physics {EffectiveIntrinsicDensity(Slotboom) Recombination( SRH(DopingDependence) auger(withGeneration) Avalanche(Lackner) ) Mobility( DopingDependence HighFieldSaturation ) Temperature=300 } Math { Extrapolate *Used for the quasistationary solution. Derivatives *Turns on Mobility analyt. derivatives. AvalDerivatives *Turns on Avalanche analyt. deriv. Iterations=100 *Max. number of steps without solution. }

20

simulation.cmd
Plot { eDensity hDensity ElectricField/Vector ElectricField Potential Doping SpaceCharge AvalancheGeneration DonorConcentration AcceptorConcentration SRH Auger Avalanche } Solve { Poisson QuasiStationary (InitialStep=0.001 Maxstep=0.1 Minstep=1e-10 Goal {name=katode voltage=70.0} Plot { range=(0 1) intervals=2 } ) { coupled (iterations=5) { Poisson electron hole}} }

21

Simulation of the device using SentaurusD: simulation.cmd For visualizing the device current data: Inspect is a plotting and analysis tool for X-Y data, such as the electrical I-V characteristics of the device.

output_des.plt output_des.dat For visualizing the device plot data: Tecplot

PHASE 3: output analysis

23

PHASE 3: output analysis

24

PHASE 3: output analysis

25

PHASE 3: output analysis

26

Flow diagram
GEOMETRY,GRID AND DOPING device.bnd, device.cmd

MDRAW
device_mdr.grd, device_mdr.dat

DEVICE CHARACTERIZATION

SENTAURUSD

simulation.cmd output_des.dat

output_des.plt OUTPUT VISUALIZATION

TECPLOT INSPECT

27