Isilon S Series
Isilon S Series
The EMC® Isilon® S-Series, powered by the OneFS® operating system, uses a highly
versatile yet simple scale-out storage architecture to speed access to massive amounts
of critical data, while dramatically reducing cost and complexity. The Isilon S-Series is
EMC Isilon S200 comprised of two product lines: the Isilon S200 and S210. Both are high-performance
2U platforms that provide ultrafast primary storage for your file-based applications.
Performance: The Isilon S200 provides up to 2.0 million CIFS file operations per second
with over 160 gigabytes per second (GB/s) of aggregate throughput in a single cluster.
The Isilon S210 provides over 3.0M IOPS and 175GB/s of aggregate throughput per
EMC Isilon S210 cluster. To accomplish these extraordinary speeds, the S200 and S210 utilize high–
performance solid-state drive (SSD) and 10,000 RPM 2.5-inch Serial Attached SCSI
(SAS) drive technology, quad 1GbE or dual 1GbE and dual 10GbE front-end networking,
a high-performance InfiniBand back-end, and over 700 terabytes (TB) of globally
coherent cache in a single cluster.
Simplicity: You can install, configure, and have an Isilon S-Series cluster online in less
than 10 minutes. When needed, you can add a node to scale performance and capacity
in about a minute.
Efficiency: Isilon scale-out storage is highly efficient and delivers over 80 percent
storage utilization versus about 50 percent for traditional platforms. Isilon
SmartDedupe™ data deduplication software further enhances storage efficiency to
reduce your physical storage requirements and associated costs. With its impressive
performance benchmarks and resulting low cost per IOP, the Isilon S-Series offers
unmatched value for a performance platform.
Security: With optional FIPS 140-2 level 2 self-encrypting drives, the Isilon S210 allows
you to meet regulatory and compliance needs for securing data at rest without
sacrificing performance or usability.
Specifications
ARCHITECTURE
SPECIFICATION SHEET
EMC ISILON S-SERIES NODE SPECIFICATIONS
ISILON S200 NODE 300 GB HDD 600 GB HDD 900 GB HDD 1.2 TB HDD
ATTRIBUTES & OPTIONS (Requires Isilon OneFS 6.5.5 or later)
Capacity (HDD/SSD) 5.4 to 7.2 TB / 0 to 10.8 to 14.4 TB / 0 to 16.2 to 21.6 TB / 0 to 21.6 to 28.8 TB / 0 to
4.8 TB 4.8 TB 4.8 TB 4.8 TB
Front-end networking 4 copper 1000 Base- 4 copper 1000 Base-T 2 x GE and 2 x 10GE 2 x GE and 2 x 10GE
T (GE) or (GE) (SFP+) (SFP+)
4 x GE (copper) or 4 x GE (copper) or
2 x GE and 2 x 10GE 2 x GE and 2 x 10GE
(SFP+ or twin-ax (SFP+ or twin-ax
copper) copper)
Capacity (HDD/SSD) 6.6 to 7.2 TB / 13.2 to 14.4 TB / 16.2 to 21.6 TB / 21.6 to 28.8 TB / 0 to 4.8TB
0 to 1.6 TB 0 to 1.6 TB 0 to 4.8 TB
Self-encrypting drive
(SED HDD) option No No Yes No
(2.5" 10k RPM)
Solid-state drives
0 to 2 0 to 2 0 to 6 0 to 6
(400 GB or 800 GB)
Self-encrypting drive
(SED SSD) option No No Yes No
(800 GB)
Front-end networking 2 copper 1000 Base-T (GE) and 2 x 10GE (SFP+ or twin-ax copper)
Infrastructure
2 InfiniBand connections supporting DDR and QDR links
networking
Non-volatile RAM
2 GB
(NVRAM)
Typical power
425 Watts
consumption @ 100v
Typical power
425 Watts
consumption @ 240v
Data protection FlexProtect™ file-level striping with support for N+1 through
N+4 and mirroring data protection schemes
Data encryption FIPS 140-2 level 2 validated self-encrypting drives (SEDs) with
option unique AES-256 bit strength keys assigned to each drive
Network protocol NFSv3, NFSv4, NFS Kerberized sessions (UDP or TCP), SMB1
support (CIFS), SMB2, SMB3 Multichannel, HTTP, FTP, NDMP, SNMP,
LDAP, HDFS, ADS, NIS reads/writes
ENVIRONMENTAL SPECIFICATIONS
Dimensions/ S200: Height: 3.48" (8.8 cm), width: 18.87" (47.9 cm), depth:
Weight 28.5" (72.4 cm), weight: 55 lbs (25.0 kg)
S210: Height: 3.48" (8.8 cm), width: 18.87" (47.9 cm), depth:
30.5" (77.47 cm), weight: 55 lbs (25.0 kg)
Minimum service
Front: 35" (88.9 cm), rear: 14" (35.6 cm)
clearances
STATEMENT OF COMPLIANCE
This Information Technology Equipment is compliant with the electromagnetic
compatibility (EMC) and product safety regulations/standards required by the
countries in which the product is sold. EMC compliance is based on FCC part 15,
CISPR22/CISPR24 and EN55022/EN55024 standards, including applicable
international variations. EMC compliant Class A products are marketed for use in
business, industrial, and commercial environments. Product Safety compliance is
based on IEC 60950-1 and EN 60951-1 standards, including applicable national
deviations.
The individual devices used in this product are approved under a unique regulatory
model identifier that is affixed to each individual device rating label, which may
differ from any marketing or product family name in this datasheet.
For additional information see https://support.emc.com under the Safety & EMI
Compliance Information tab.
CONTACT US
To learn more about how EMC Isilon
products, services, and solutions can
help solve your business and IT
challenges, contact your local
representative or authorized reseller—
or visit us at www.EMC.com/Isilon.
EMC2, EMC, the EMC logo, FlexProtect, Isilon, OneFS, SmartDedupe, SmartLock, SmartPools, and
SyncIQ are registered trademarks or trademarks of EMC Corporation in the United States and
other countries. All other trademarks used herein are the property of their respective owners.
© Copyright 2014 EMC Corporation. All rights reserved. Published in the USA. 06/14
Specification Sheet H10690.8
EMC believes the information in this document is accurate as of its publication date. The
www.EMC.com information is subject to change without notice.