Scribd
Upload
242 views1 page

FSS Checklist

A monthly preventive maintenance inspection was conducted on a clean agent fire suppression system using FM200, NOVEC 1230, or HFC-227ea at a site in Red Sea. The inspection checked for physical damage, proper orientation and mounting, pressure levels, electrical connections, and integration with fire alarms across 18 items to ensure the system was in good and safe working order. No issues were noted during the inspection.

Uploaded by

Waleed Awan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
242 views1 page

FSS Checklist

A monthly preventive maintenance inspection was conducted on a clean agent fire suppression system using FM200, NOVEC 1230, or HFC-227ea at a site in Red Sea. The inspection checked for physical damage, proper orientation and mounting, pressure levels, electrical connections, and integration with fire alarms across 18 items to ensure the system was in good and safe working order. No issues were noted during the inspection.

Uploaded by

Waleed Awan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PREVENTIVE MAINTENANCE INSPECTION CHECK LIST

CLEAN AGENT FIRE SUPPRESSION SYSTEM


FM200 NOVEC 1230 HPC02
INSPECTION TENURE MONTHLY
DATE OF SERVICE
COMPANY NAME ESOM INSPECTED BY SAFECO (O&M)
SITE NAME RED SEA - CONTACT NO 591720198
CONTACT PERSON SOHAIL PERMANENT ASSET TAG # AND AREA PROTECTED
CONTACT NO 500536066
REMARKS

SL # DESCRIPTION Y N N/A REMARKS

1 GENERAL CLEANLINESS - VISUAL INSPECTION   


CYLINDER/ PIPING/ HOSES/ MOUNTING BRACKETS ETC - INSPECT FOR
2   
PHYSICAL DAMAGE/ CORROSION
3 NOZZLE - CONDITION AND ORIENTATION OF NOZZLES   

4 PANEL/ NAC'S/ IDC'S ETC - INSPECT FOR PHYSICAL DAMAGE   

5 WARNING SIGNS/ RECORD TAG - INSPECT FOR AVAILABILITY   

6 EXTINGUISHING PANEL - INSPECT FOR FAULT SIGNALS   

7 DUST & CLEAN - CYLINDERS/ FECP/IDC/NAC   


CYLINDER PRESSURE GAUGE - INSPECT FOR NORMAL PRESSURE
8 (REPLACEMENT/ REPRESSURIZING SHALL BE CARRIED OUT IF THE PRESSURE   
LOSS IS MORE THAN 10%)
CYLINDER LEVEL GAUGE - LIQUID LEVEL (REFILLING/ REPLACEMENT SHALL
9   
BE CARRIED OUT IF THE AGENT LOSS IS MORE THAN 5%)
10 SOLENOID ACTUATOR - INSPECT FOR CONDITION & VERIFY IF CONNECTED   

11 SUPPRESSION SYSTEM ACTIVE (ARMED STATE)   

11 TIME DELAY - MENTION DELAY (SECONDS) IF PROGRAMMED   

12 BACK UP BATTERY - INSPECT FOR CONDITION & CAPACITY   

13 AC POWER/ BATTERY FAILIURE - VERIFY FOR TROUBLE SIGNAL   

14 LOW PRESSURE SWITCH - VERIFY IF CONNECTED TO CYLINDERS   

15 DISCHARGE PRESSURE SWITCH - CHECK CONDITION & IF CONNECTED   

16 TROUBLE SIGNAL INTEGRATION WITH FDAS   

17 FIRE SIGNAL INTEGRATION WITH FDAS   

18 DISABLEMENT SWITCH - CHECK FOR ANY PHYSICAL DAMAGE & CONDITION   

ADDITIONAL REMARKS

Page 1

You might also like