The document discusses the International System of Units (SI) or metric system which is the international standard for measurement. It defines key terms like precision and accuracy in measurement. It also outlines the rules for determining the number of significant figures in measurements, including when leading, trailing, and zeros between numbers are considered significant. Prefixes are used to modify base SI units to indicate multiplication by powers of ten.
The document discusses the International System of Units (SI) or metric system which is the international standard for measurement. It defines key terms like precision and accuracy in measurement. It also outlines the rules for determining the number of significant figures in measurements, including when leading, trailing, and zeros between numbers are considered significant. Prefixes are used to modify base SI units to indicate multiplication by powers of ten.
The document discusses the International System of Units (SI) or metric system which is the international standard for measurement. It defines key terms like precision and accuracy in measurement. It also outlines the rules for determining the number of significant figures in measurements, including when leading, trailing, and zeros between numbers are considered significant. Prefixes are used to modify base SI units to indicate multiplication by powers of ten.
The document discusses the International System of Units (SI) or metric system which is the international standard for measurement. It defines key terms like precision and accuracy in measurement. It also outlines the rules for determining the number of significant figures in measurements, including when leading, trailing, and zeros between numbers are considered significant. Prefixes are used to modify base SI units to indicate multiplication by powers of ten.
Download as DOCX, PDF, TXT or read online from Scribd
Download as docx, pdf, or txt
You are on page 1/ 3
1. What is SI measurement?
The International System of Units (SI), commonly known as the metric system of units, is the international standard for measurement. The metric system is used in scientific work. The units of this system included the gram, meter, and liter.
2. What are the prefixes used in SI measurement?
Common Metric system prefixes, along with their symbols or abbreviations and mathematical meanings. The meaning of a metric system prefix is independent pf the base unit it modifies and always remains constant. They are; nano- (one-billionth), micro- (one-millionth), deci- (one-tenth), kilo- (one thousand), mega- (one million), and giga- (one billion).
3. What do you mean by the precision and accuracy?
Accuracy refers to how closely the measured value of a quantity corresponds to
its true value while precision expresses the degree of reproducibility or agreement between repeated measurements. The more measurements you make and the better the precision, the smaller the error will be. 4. What are the rules applied in significant figures?
RULES FOR SIGNIFICANT FIGURES
1. All non-zero numbers ARE significant. The number 33.2 has THREE significant figures because all of the digits present are non-zero. 2. Zeros between two non-zero digits ARE significant. 2051 has FOUR significant figures. The zero is between a 2 and a 5. 3. Leading zeros are NOT significant. They're nothing more than "place holders." The number 0.54 has only TWO significant figures. 0.0032 also has TWO significant figures. All of the zeros are leading. 4. Trailing zeros to the right of the decimal ARE significant. There are FOUR significant figures in 92.00. 92.00 is different from 92: a scientist who measures 92.00 milliliters knows his value to the nearest 1/100th milliliter; meanwhile his colleague who measured 92 milliliters only knows his value to the nearest 1 milliliter. It's important to understand that "zero" does not mean "nothing." Zero denotes actual information, just like any other number. You cannot tag on zeros that aren't certain to belong there. 5. Trailing zeros in a whole number with the decimal shown ARE significant. Placing a decimal at the end of a number is usually not done. By convention, however, this decimal indicates a significant zero. For example, "540." indicates that the trailing zero IS significant; there are THREE significant figures in this value. 6. Trailing zeros in a whole number with no decimal shown are NOT significant. Writing just "540" indicates that the zero is NOT significant, and there are only TWO significant figures in this value. 7. Exact numbers have an INFINITE number of significant figures. This rule applies to numbers that are definitions. For example, 1 meter = 1.00 meters = 1.0000 meters = 1.0000000000000000000 meters, etc. So now back to the example posed in the Rounding Tutorial: Round 1000.3 to four significant figures. 1000.3 has five significant figures (the zeros are between non-zero digits 1 and 3, so by rule 2 above, they are significant.) We need to drop the final 3, and since 3 < 5, we leave the last zero alone. so 1000. is our four-significant-figure answer. (from rules 5 and 6, we see that in order for the trailing zeros to "count" as significant, they must be followed by a decimal. Writing just "1000" would give us only one significant figure.) 8. For a number in scientific notation: N x 10x, all digits comprising N ARE significant by the first 6 rules; "10" and "x" are NOT significant. 5.02 x 104 has THREE significant figures: "5.02." "10 and "4" are not significant. Rule 8 provides the opportunity to change the number of significant figures in a value by manipulating its form. For example, let's try writing 1100 with THREE significant figures. By rule 6, 1100 has TWO significant figures; its two trailing zeros are not significant. If we add a decimal to the end, we have 1100., with FOUR significant figures (by rule 5.) But by writing it in scientific notation: 1.10 x 103, we create a THREE-significant-figure value.
