0% found this document useful (0 votes)
152 views1 page

Dibal Dmi-610

The DMI-610 weight indicator has a 32-bit microprocessor and 256 KB of flash memory. It has a 6-digit LED display, internal rechargeable battery, and can operate from 110-230 VAC or 12 VDC power. Key features include high speed communication ports, internal calibration with up to 5 points, tare functions, and an IP rating of 65.

Uploaded by

Octavian Matei
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
152 views1 page

Dibal Dmi-610

The DMI-610 weight indicator has a 32-bit microprocessor and 256 KB of flash memory. It has a 6-digit LED display, internal rechargeable battery, and can operate from 110-230 VAC or 12 VDC power. Key features include high speed communication ports, internal calibration with up to 5 points, tare functions, and an IP rating of 65.

Uploaded by

Octavian Matei
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

PRODUCT DATA SHEET v 1.

0 - 06/2014

Weight Indicator DMI-610

Power
110-230 VAC (direct) and 12 VDC (adapter)
Power
Internal Rechargable Battery (IRB) Li-ion. External Battery Connection

Technical Specifications
Microprocessor 32 bit
Flash Memory 256 kb
RAM Memory 64 kb
A/D converter 24 bit, up to 120 samples/sec.
OIML Class III Up to 6.000 divisions
Internal divisions 120.000
10V/m compliance YES
Structure Operating
- 10 ºC to + 40 ºC
Temperature
Stainless Steel AISI304
Housing Supply voltage 110-230 VAC (direct) and 12 VDC (adapter)
ABS
Display Red LED, 6 digits of 1” (25,4 mm.) Loadcell excitation
voltage 5 VDC
Indicators Working mode, CW, IRB,...
Keyboard 7 keys under membrane Minimum dead
load signal 0 mV

Maximum dead
Applications 2,5 mV
load signal
Weight-Tare-Accumulation Minimum voltage of
the measure range 0 mV
Piece counting function
Applications Checkweigher function (min.-objective-max.) Maximum voltage of
15 mV

Specifications and images subjected to change without prior notice. DMI-610 Data Sheet v.1.0. Ref.: 140625
1P/2S dosage * the measure range
Analogue outputs: 4-20 mA / 0-10 V *
Signal voltage per
Alibi memory verification scale 1 µV / e
* Only in STAINLESS STEEL Model interval
Minimum Impedance 25 Ù
Weighing Loadcell cable 4 wires (original length) / 6 wires (no limitation)
Up to 6.000 divisions Subtractive tare - Max.
Accuracy
Monorange, multirange and multiinterval Zero setting margin 2%
Platforms Connection to weight platform up to 14 load cells Pi Fraction 0,5
Connection Connection up to 4 platforms (up to 14 load cells) * Clock Real Time Clock (RTC)
Linearisation Up to 5 points of calibration
Consecutive tares
Tare
10 programmable tares “Going Green”
Units Kilograms, Pounds RoHS compliance YES
* Only in STAINLESS STEEL Model Stand-By Mode YES
Internal Rechargable
Li-ion
Communications Battery (IRB)

2 RS-232 high speed ports (115.200 bps)


Ethernet TCP/IP, USB
Communications RS-485, Wi-Fi * PC Software
DMI-600 protocols Programming and
data management VDC+DCS
Industrial protocols (Consult us)
* Only in STAINLESS STEEL Model

DIBAL, S.A. - Astintze, 24 (P. I. Neinver) - 48160 DERIO (Vizcaya) SPAIN - Tel.: (+34) 94 452 15 10 - Fax: (+34) 94 452 36 58 - www.dibal.com - E-mail: [email protected]

You might also like