Scribd
Upload
231 views6 pages

CALCULATION SHEET For Boiler

This document contains calculations for the minimum required thickness and remaining corrosion allowance of a shell. It details the equipment name, year built, material, diameter, length, design temperature, operating temperature, design pressure, and working pressure. The minimum required thickness was calculated to be 12.26mm with a remaining corrosion allowance of -3.93mm. The maximum allowable working pressure was determined to be 209.55 PSI.

Uploaded by

AliDadKhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
231 views6 pages

CALCULATION SHEET For Boiler

This document contains calculations for the minimum required thickness and remaining corrosion allowance of a shell. It details the equipment name, year built, material, diameter, length, design temperature, operating temperature, design pressure, and working pressure. The minimum required thickness was calculated to be 12.26mm with a remaining corrosion allowance of -3.93mm. The maximum allowable working pressure was determined to be 209.55 PSI.

Uploaded by

AliDadKhan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 6

CALCULATION SHEET & REMAINING CORROSION ALLOWANCE OF

SHELL

INDUSTRIAL SERVICES
Equipment Name: S-741 Year Buit 1985 Material
Diameter 4 ft Length.(S-S) 11 Ft R.T Efficiency
Design Temp. N/A Operating Temp. 184 C Stress Value
Design Pressure 150 psi Working Presuure 150 PSI Y-Coeff

Minimun Thickness required for Shell


Pressure (bar) 13.00 INCH
Pressure (psi) P 188.5
Diameter D 90
Stress Value S 17500 0.48
R.T Efficiency E 1
T actual mm t 8.33

Maximum Allowable Working Pressure


Bar
Thickness (mm) t 11.2
Diameter D 74
Stress Value S 17500 14.45
R.T Efficiency E 1
Y-Coeff 0.40

PREPARED BY: S.Kaif ul Hasan


QUALIFICATION: API-510 Cert# 76371
SIGNATURE
BOSS# 5007181

Page: 01 of 01

DATE: 21-05-2019
SA 516 Gr 70
100%
17500
0.4

ell
mm RCA

12.26 -3.93

ure
PSI

209.55
CALCULATION SHEET & REMAINING CORROSION ALLOWANCE OF BOSS#
Boiler & tube sheet
Page: 01 of 01
INDUSTRIAL SERVICES
DATE:
Equipment Name: Year Buit Material
Diameter Length.(S-S) Radioghraphy
Design Temp. Operating Temp. Stress Value
Design Pressure Working Presuure Design Thickness
T required for tube T Required

INCH MM RCA
Pressure (Bar) 12
Pressure (psi) 174.048
Outer Dia (D) 1.496
0.02 0.41 -0.41
Stress Value (S) 14900
R.T Efficiency 1
T actual mm
Corrosion Allow. 0
IN 0.00

T required for Dish T Required

INCH MM RCA
Pressure (psi)
Diameter
Stress Value #DIV/0! #DIV/0! #DIV/0!
R.T Efficiency
T actual mm
IN

PREPARED BY: S.Kaif Ul Hasan


QUALIFICATION: API-510 Cert# 76371
SIGNATURE
CALCULATION SHEET & REMAINING CORROSION ALLOWANCE OF BOSS#
Boiler & tube sheet
Page: 01 of 01
INDUSTRIAL SERVICES
DATE:
Equipment Name: Year Buit Material
Diameter Length.(S-S) Radioghraphy
Design Temp. Operating Temp. Stress Value
Design Pressure Working Presuure Design Thickness
T required for tube T Required

INCH MM RCA
Pressure (Bar) 13
Pressure (psi) 188.5

t=p x sqrt(P/SC) p (Pitch)


Stress Value (S)
10.826772
17500
0.76 19.24 -19.24

R.T Efficiency 1
T actual mm
C 2.2
IN 0.00 13.1726634871658

T required for Dish T Required

INCH MM RCA
Pressure (psi)
Diameter
Stress Value #DIV/0! #DIV/0! #DIV/0!
R.T Efficiency
T actual mm
IN

PREPARED BY: S.Kaif Ul Hasan


QUALIFICATION: API-510 Cert# 76371
SIGNATURE
CALCULATION SHEET & REMAINING CORROSION ALLOWANCE OF BOSS#
Boiler & tube sheet
Page: 01 of 01
INDUSTRIAL SERVICES
DATE:
Equipment Name: Year Buit Material
Diameter Length.(S-S) Radioghraphy
Design Temp. Operating Temp. Stress Value
Design Pressure Working Presuure Design Thickness
T required for tube T Required

INCH MM RCA
Pressure (Bar) 12
Pressure (psi) 174.048
Outer Dia (D) 1.496
0.02 0.41 -0.41
Stress Value (S) 14900
R.T Efficiency 1
T actual mm
Corrosion Allow. 0
IN 0.00

T required for Dish T Required

INCH MM RCA
Pressure (psi)

P*D/2SE-0.2*P Diameter
Stress Value #DIV/0! #DIV/0! #DIV/0!
R.T Efficiency
T actual mm
IN

PREPARED BY: S.Kaif Ul Hasan


QUALIFICATION: API-510 Cert# 76371
SIGNATURE

You might also like