Government of India

Form GST REG-06

[See Rule 10(1)]

Registration Certificate

Registration Number : 27AARFC0373K1Z4

1. Legal Name CEMA TESTING LABORATORY

2. Trade Name, if any CEMA TESTING LABORATORY

3. Additional trade names, if any null

4. Constitution of Business Partnership

5. Address of Principal Place of PLOT NO 28, SHRIKANT MANIKRAO HIRUDKAR,

Business AYODHYA NAGAR, NEAR SAIBABA MANDIR, Nagpur,
Nagpur, Maharashtra, 440024

6. Date of Liability

7. Period of Validity From 14/01/2023 To Not Applicable

8. Type of Registration Regular

9 Particulars of Approving Authority

Signature

Name

Designation

Jurisdictional Office

9. Date of issue of Certificate 14/01/2023

Note: The registration certificate is required to be prominently displayed at all places of business in the State.

This is a system generated digitally signed Registration Certificate issued based on the deemed approval of application on 14/01/2023 .
 Annexure A

GSTIN 27AARFC0373K1Z4

Legal Name CEMA TESTING LABORATORY

Trade Name, if any CEMA TESTING LABORATORY

Additional trade names, if null

any

Details of Additional Places of Business

Total Number of Additional Places of Business in the State 0

 Annexure B

GSTIN 27AARFC0373K1Z4

Legal Name CEMA TESTING LABORATORY

Trade Name, if any CEMA TESTING LABORATORY

Additional trade names, if null

any

Details of Managing / Authorized Partners

1 Name SHRIKANT MANIKRAO HIRUDKAR

Designation/Status PARTNER

Resident of State Maharashtra

2 Name KSHAMA SHRIKANT HIRUDKAR

Designation/Status PARTNER

Resident of State Maharashtra

 Udyam Registration Number : UDYAM-MH-20-0068066

Type of Enterprise MICRO Major Activity Services

Type of Organisation Partnership Name of Enterprise M/S CEMA TESTING LABORATORY
Owner Name M/S CEMA TESTING LABORATORY PAN AARFC0373K
Do you have GSTIN No Mobile No. 9822223948
Email Id [email protected] Social Category OBC
Gender Female Specially Abled(DIVYANG) No
Date of Commencement of
Date of Incorporation 01/01/2021 01/01/2021
Production/Business

Bank Details

Bank Name IFS Code Bank Account Number

AXIS BANK LTD UTIB0004777 922020001557636

Employment Details

Male Female Other Total

7 2 0 9

Investment in Plant and Machinery OR Equipment (in Rs.)

SNo. Financial Enterprise Written Exclusion of cost of Net Investment in Total Export Net Is ITR ITR
Year Type Down Pollution Control, Plant and Machinery Turnover Turnover Turnover Filled? Type
Value Research & OR Equipment[(A)-(B)] (A) (B) [(A)-(B)]
(WDV) Development and
Industrial Safety
Devices

1 2019-20 Micro 5000000.00 50000.00 4950000.00 25000.00 0.00 25000.00 No NA

Unit(s) Details

SN Unit Name Flat Building Village/Town Block Road City Pin State District
Behind
M/S CEMA TESTING Plot No. Sarswati Building,
1 NAGPUR NAGPUR Dwarkamai NAGPUR 440024 MAHARASHTRA NAGPUR
LABORATORY 28 Ayodhya Nagar
Mandir

Official address of Enterprise

Flat/Door/Block No. Plot No. 28 Name of Premises/ Building Sarswati Building, Ayodhya Nagar
Village/Town NAGPUR Block NAGPUR
Road/Street/Lane Behind Dwarkamai Mandir City NAGPUR
State MAHARASHTRA District NAGPUR , Pin : 440024
Mobile 9822223948 Email: [email protected]

National Industry Classification Code(S)

SNo. Nic 2 Digit Nic 4 Digit Nic 5 Digit Activity
72 - Scientific research and 7210 - Research and experimental development on 72100 - Research and experimental development on
1 Services
development natural sciences and engineering natural sciences and engineering

Are you interested to get registered on Government e-Market (GeM) Portal Yes
Are you interested to get registered on TReDS Portals(one or more) No
DIC NAGPUR
MSME-DI NAGPUR
Date of Udyam Registration 11/02/2022
 CEMA TESTING LABORATORY
has been assessed and accredited in accordance with the standard

ISO/IEC 17025:2017
''General Requirements for the Competence of Testing &
Calibration Laboratories''
for its facilities at
28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA

in the field of

TESTING
Certificate Number: TC-11250
Issue Date: 31/12/2022 Valid Until: 30/12/2024

This certificate remains valid for the Scope of Accreditation as specified in the annexure subject to continued
satisfactory compliance to the above standard & the relevant requirements of NABL.
(To see the scope of accreditation of this laboratory, you may also visit NABL website www.nabl-india.org)

Name of Legal Identity : Cema Testing Laboratory

Signed for and on behalf of NABL

N. Venkateswaran
Chief Executive Officer
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 1 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
Permanent Facility
CHEMICAL- BUILDING
1 Admixture Ash Content IS 9103
MATERIAL
CHEMICAL- BUILDING
2 Admixture Chloride Content IS 6925
MATERIAL
CHEMICAL- BUILDING
3 Admixture Dry Material Content IS 9103
MATERIAL
CHEMICAL- BUILDING
4 Admixture pH IS 9103
MATERIAL
CHEMICAL- BUILDING
5 Admixture Relative Density IS 9103
MATERIAL
CHEMICAL- BUILDING
6 Cement Potassium Oxide IS 4032
MATERIAL
CHEMICAL- BUILDING
7 Cement Sodium Oxide IS 4032
MATERIAL
CHEMICAL- BUILDING
8 Cement (OPC, PPC, PSC) Alumina IS 4032
MATERIAL
CHEMICAL- BUILDING
9 Cement (OPC, PPC, PSC) Calcium Oxide IS 4032
MATERIAL
CHEMICAL- BUILDING
10 Cement (OPC, PPC, PSC) Chloride IS 4032
MATERIAL
CHEMICAL- BUILDING
11 Cement (OPC, PPC, PSC) Ferric Oxide IS 4032
MATERIAL
CHEMICAL- BUILDING
12 Cement (OPC, PPC, PSC) Insoluble Residue IS 4032
MATERIAL
CHEMICAL- BUILDING
13 Cement (OPC, PPC, PSC) Loss on Ignition IS 4032
MATERIAL
CHEMICAL- BUILDING
14 Cement (OPC, PPC, PSC) Magnesia IS 4032
MATERIAL
CHEMICAL- BUILDING
15 Cement (OPC, PPC, PSC) Silica IS 4032
MATERIAL
CHEMICAL- BUILDING
16 Cement (OPC, PPC, PSC) Sulpuric Anhydride IS 4032
MATERIAL
CHEMICAL- BUILDING Alkali Aggregate Reactivity
17 Coarse Aggregate IS 2386 (Part 7)
MATERIAL (Dissolved Silica)
CHEMICAL- BUILDING Alkali Aggregate Reactivity
18 Coarse Aggregate IS 2386 (Part 7)
MATERIAL (Reduction in Alkalinity)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 2 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
CHEMICAL- BUILDING Soundness by Sodium Sulphate
19 Coarse Aggregate IS 2386 (Part 5)
MATERIAL Method
CHEMICAL- BUILDING Alkali Aggregate Reactivity
20 Fine Aggregate IS 2386 (Part 7)
MATERIAL (Dissolved Silica)
CHEMICAL- BUILDING Alkali Aggregate Reactivity
21 Fine Aggregate IS 2386 (Part 7)
MATERIAL (Reduction in Alkalinity)
CHEMICAL- BUILDING Soundness by Sodium Sulphate
22 Fine Aggregate IS 2386 (Part 5)
MATERIAL Method
CHEMICAL- BUILDING
23 Fly ash Aluminium Oxide IS 1727
MATERIAL
CHEMICAL- BUILDING
24 Fly ash Chloride IS 4032
MATERIAL
CHEMICAL- BUILDING
25 Fly Ash Iron Oxide IS 1727
MATERIAL
CHEMICAL- BUILDING
26 Fly ash Loss on Ignition IS 1727
MATERIAL
CHEMICAL- BUILDING
27 Fly ash Silica IS 1727
MATERIAL
CHEMICAL- BUILDING
28 Fly ash Sulphiric Anhydride IS 1727
MATERIAL
CHEMICAL- BUILDING
29 Silica Fume Loss on Ignition IS 1727
MATERIAL
CHEMICAL- BUILDING
30 Silica Fume Moisture Content IS 15388
MATERIAL
CHEMICAL- BUILDING
31 Silica Fume Silicon Dioxide (SiO2) IS 1727
MATERIAL
CHEMICAL- SOIL AND
32 Soil Acid Soluble Chloride BS 1377 (Part 3)
ROCK
CHEMICAL- SOIL AND
33 Soil Organic Matter IS 2720 (Part 22)
ROCK
CHEMICAL- SOIL AND
34 Soil pH IS 2720 (Part 26)
ROCK
CHEMICAL- SOIL AND
35 Soil Sulphate as SO3 IS 2720 (Part 27)
ROCK
36 CHEMICAL- WATER Water for Construction Purpose Chloride IS 3025 (Part 32)
37 CHEMICAL- WATER Water for Construction Purpose Inorganic Matter IS 3025 (Part 18)
38 CHEMICAL- WATER Water for Construction Purpose Organic Matter IS 3025 (Part 18)

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 3 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
39 CHEMICAL- WATER Water for Construction Purpose pH IS 3025 (Part 11)
40 CHEMICAL- WATER Water for Construction Purpose Sulphate as SO3 IS 3025 (Part 24)
Volume of 0.02 N H2SO4 used
41 CHEMICAL- WATER Water for Construction Purpose to Neutralize 100 ml of sample IS 3025 (Part 23)
(Alkalinity)
Volume of 0.02 N NaOH used
42 CHEMICAL- WATER Water for Construction Purpose to Neutralize 100 ml of Sample IS 3025 (Part 22)
(Acidity)
MECHANICAL- BUILDINGS
43 Acid Resistant Bricks Acid Resistance IS 4860
MATERIALS
MECHANICAL- BUILDINGS
44 Acid Resistant Bricks Compression Strength IS 4860
MATERIALS
MECHANICAL- BUILDINGS
45 Acid Resistant Bricks Flexural Strength IS 4860
MATERIALS
MECHANICAL- BUILDINGS
46 Acid Resistant Bricks Water Absorption IS 4860
MATERIALS
MECHANICAL- BUILDINGS
47 Bitumen Absolute Viscosity IS 1206 (Section 2)
MATERIALS
MECHANICAL- BUILDINGS
48 Bitumen Ductility IS 1208
MATERIALS
MECHANICAL- BUILDINGS
49 Bitumen Flash Point IS 1209
MATERIALS
MECHANICAL- BUILDINGS
50 Bitumen Kinematic Viscosity IS 1206 (Section 3)
MATERIALS
MECHANICAL- BUILDINGS
51 Bitumen Penetration IS 1203
MATERIALS
MECHANICAL- BUILDINGS
52 Bitumen Softening Point IS 1205
MATERIALS
MECHANICAL- BUILDINGS
53 Bitumen Specific Gravity IS 1202
MATERIALS
MECHANICAL- BUILDINGS
54 Bitumen Weight Loss on Heating IS 1212
MATERIALS
MECHANICAL- BUILDINGS
55 Bitumen Emulsion Ductility of Residue IS 1208
MATERIALS
MECHANICAL- BUILDINGS
56 Bitumen Emulsion Penetration on Residue IS 1203
MATERIALS
MECHANICAL- BUILDINGS
57 Bitumen Emulsion Residue on 600 micron IS Sieve IS 8887 (Annexure B)
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 4 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS
58 Bitumen Emulsion Solubility in Trichloroethylene IS 8887
MATERIALS
MECHANICAL- BUILDINGS
59 Bitumen Emulsion Stability to mix with Cement IS 8887 (Annexure G)
MATERIALS
MECHANICAL- BUILDINGS
60 Bitumen Emulsion Storage Stability after 24 hours IS 8887 (Annexure D)
MATERIALS
MECHANICAL- BUILDINGS Test on Residue - Residue by
61 Bitumen Emulsion IS 8887 (Annexure J)
MATERIALS Evaporation
MECHANICAL- BUILDINGS
62 Bituminous Mix Binder Content ASTM D2172
MATERIALS
MECHANICAL- BUILDINGS
63 Bituminous Mix Marshall Flow ASTM D6927
MATERIALS
MECHANICAL- BUILDINGS
64 Bituminous Mix Marshall Stability ASTM D6927
MATERIALS
MECHANICAL- BUILDINGS
65 Burnt Clay Bricks Compressive Strength IS 3495 (Part 1)
MATERIALS
MECHANICAL- BUILDINGS
66 Burnt Clay Bricks Dimension (Height) IS 1077
MATERIALS
MECHANICAL- BUILDINGS
67 Burnt Clay Bricks Dimension (Length) IS 1077
MATERIALS
MECHANICAL- BUILDINGS
68 Burnt Clay Bricks Dimension (Width) IS 1077
MATERIALS
MECHANICAL- BUILDINGS
69 Burnt Clay Bricks Efflorescence IS 3495 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
70 Burnt Clay Bricks Water Absorption IS 3495 (Part 2)
MATERIALS
MECHANICAL- BUILDINGS Fineness by Blaine Air
71 Cement (OPC, PPC) IS 4031 (Part 2)
MATERIALS Permeability Method
MECHANICAL- BUILDINGS
72 Cement (OPC, PPC, SPC) Compressive Strength IS 4031 (Part 6)
MATERIALS
MECHANICAL- BUILDINGS
73 Cement (OPC, PPC, SPC) Density IS 4031 (Part 11)
MATERIALS
MECHANICAL- BUILDINGS
74 Cement (OPC, PPC, SPC) Fineness by Dry Sieving IS 4031 (Part 1)
MATERIALS
MECHANICAL- BUILDINGS
75 Cement (OPC, PPC, SPC) Setting Time (Final) IS 4031 (Part 5)
MATERIALS
MECHANICAL- BUILDINGS
76 Cement (OPC, PPC, SPC) Setting Time (Initial) IS 4031 (Part 5)
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 5 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS Soundness by Le-Chatelier
77 Cement (OPC, PPC, SPC) IS 4031 (Part 3)
MATERIALS Method
MECHANICAL- BUILDINGS
78 Cement (OPC, PPC, SPC) Standard Consistency IS 4031 (Part 4)
MATERIALS
MECHANICAL- BUILDINGS
79 Coarse Aggregate 10 % Fines Value IS 2386 (Part 4)
MATERIALS
MECHANICAL- BUILDINGS
80 Coarse Aggregate Abrasion Value (Los Angles) IS 2386 (Part 4)
MATERIALS
MECHANICAL- BUILDINGS
81 Coarse Aggregate Bulk Density IS 2386 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
82 Coarse Aggregate Crushing Value IS 2386 (Part 4)
MATERIALS
MECHANICAL- BUILDINGS
83 Coarse Aggregate Elongation Index IS 2386 (Part 1)
MATERIALS
MECHANICAL- BUILDINGS
84 Coarse Aggregate Flakiness Index IS 2386 (Part 1)
MATERIALS
MECHANICAL- BUILDINGS
85 Coarse Aggregate Impact Value IS 2386 (Part 4)
MATERIALS
MECHANICAL- BUILDINGS Impact Value (Soft Coarse
86 Coarse Aggregate IS 5640
MATERIALS Aggregate)
MECHANICAL- BUILDINGS Sieve Analysis (Grading) (Sieve
87 Coarse Aggregate IS 2386 (Part 1)
MATERIALS Size: 4.75 mm to 63 mm)
MECHANICAL- BUILDINGS
88 Coarse Aggregate Specific Gravity IS 2386 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
89 Coarse Aggregate Stripping Value Test IS 6241
MATERIALS
MECHANICAL- BUILDINGS
90 Coarse Aggregate Water Absorption IS 2386 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
91 Concrete Beam Flexural Strength IS 516
MATERIALS
MECHANICAL- BUILDINGS
92 Concrete Cube/ Core Compressive Strength IS 516
MATERIALS
MECHANICAL- BUILDINGS
93 Fine Aggregate Air Voids IS 2386 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
94 Fine Aggregate Bulk Density IS 2386 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
95 Fine Aggregate Materials Finer than 75 micron IS 2386 (Part 1)
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 6 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS Sieve Analysis (Grading) (Sieve
96 Fine Aggregate IS 2386 (Part 1)
MATERIALS Size: 75 µm to 4.75 mm)
MECHANICAL- BUILDINGS
97 Fine Aggregate Specific Gravity IS 2386 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
98 Fine Aggregate Water Absorption IS 2386 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
99 Fly Ash Final Setting Time IS 4031 (Part 5)
MATERIALS
MECHANICAL- BUILDINGS
100 Fly Ash Initial Setting Time IS 4031 (Part 5)
MATERIALS
MECHANICAL- BUILDINGS
101 Fly Ash Moisture Content IS 3812 (Part 1)
MATERIALS
MECHANICAL- BUILDINGS Residue on 45 micron (Wet
102 Fly Ash IS 1727
MATERIALS Sieving)
MECHANICAL- BUILDINGS
103 Fly Ash Soundness by Le-Chatelier IS 4031 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
104 Fly Ash Specific Gravity IS 1727
MATERIALS
MECHANICAL- BUILDINGS Specific Surface by Blaine Air
105 Fly Ash IS 1727
MATERIALS Method
MECHANICAL- BUILDINGS
106 Fly ash Bricks Compressive Strength IS 3495 (Part 1)
MATERIALS
MECHANICAL- BUILDINGS
107 Fly ash Bricks Dimension (Height) IS 13757
MATERIALS
MECHANICAL- BUILDINGS
108 Fly ash Bricks Dimension (Length) IS 13757
MATERIALS
MECHANICAL- BUILDINGS
109 Fly ash Bricks Dimension (Width) IS 13757
MATERIALS
MECHANICAL- BUILDINGS
110 Fly ash Bricks Efflorescence Test IS 3495 (Part 3)
MATERIALS
MECHANICAL- BUILDINGS
111 Fly ash Bricks Water Absorption IS 3495 (Part 2)
MATERIALS
MECHANICAL- BUILDINGS
112 Precast Concrete Paving Block Compressive Strength IS 15658
MATERIALS
MECHANICAL- BUILDINGS
113 Precast Concrete Paving Block Dimension (L x W x H) IS 15658
MATERIALS
MECHANICAL- BUILDINGS
114 Precast Concrete Paving Block Water Absorption IS 15658
MATERIALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 7 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- BUILDINGS
115 Tiles (Ceramic/ Vitrified) Water Absorption IS 13630 (Part 2)
MATERIALS
MECHANICAL-
Dimension- Diameter & Side
116 MECHANICAL PROPERTIES Hot Rolled Steel (Round and Square Bar) IS 1732
Width
OF METALS
MECHANICAL-
117 MECHANICAL PROPERTIES Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloy, Ti-Ti Alloy Tensile Test (0.2% PS) IS 1608 (Part 1)
OF METALS
MECHANICAL-
118 MECHANICAL PROPERTIES Fasteners (Bolt & Stud) Tensile Test (% E) ISO 898 (Part 1)
OF METALS
MECHANICAL-
119 MECHANICAL PROPERTIES Fasteners (Bolt & Stud) Tensile Test (% RA) IS 1367 (Part 3)
OF METALS
MECHANICAL-
120 MECHANICAL PROPERTIES Fasteners (Bolt & Stud) Tensile Test (% RA) ISO 898 (Part 1)
OF METALS
MECHANICAL-
121 MECHANICAL PROPERTIES Fasteners (Bolt & Stud) Tensile Test (UTS) IS 1367 (Part 3)
OF METALS
MECHANICAL-
122 MECHANICAL PROPERTIES Fasteners (Bolt & Stud) Tensile Test (UTS) ISO 898 (Part 1)
OF METALS
MECHANICAL-
123 MECHANICAL PROPERTIES Fasteners (Bolt & Stud) Tensile Test (YS) IS 1367 (Part 3)
OF METALS
MECHANICAL-
124 MECHANICAL PROPERTIES Fasteners (Bolt) Wedge Test IS 1367 (Part 3)
OF METALS
MECHANICAL-
125 MECHANICAL PROPERTIES Fasteners (Bolt, Stud & Nuts) Proof Load Test IS 1367 (Part 3)
OF METALS
MECHANICAL-
126 MECHANICAL PROPERTIES Fasteners (Bolt, Stud & Nuts) Proof Load Test IS 1367 (Part 6)
OF METALS
MECHANICAL-
127 MECHANICAL PROPERTIES Fasteners (Nut) Rockwell Hardness (HRC) ISO 898-2
OF METALS
MECHANICAL-
128 MECHANICAL PROPERTIES Fasteners (Nut) Rockwell Hardness (HRC) IS 1367 (Part 6)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 8 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
129 MECHANICAL PROPERTIES Ferrous & Non-Ferrous Materials & Products Charpy Impact Test IS 1757 (Part 1)
OF METALS
MECHANICAL-
130 MECHANICAL PROPERTIES Ferrous & Non-Ferrous Materials & Products Izod Impact Test IS 1598
OF METALS
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
Brinell Hardness Test (10 mm/
131 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti ASTM E10
3000 kgf)
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
Brinell Hardness Test (10
132 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti IS 1500 (Part 1 & 2)
mm/3000 kgf)
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
Brinell Hardness Test (5
133 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti ASTM E10
mm/750 kgf)
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
134 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti Izod Impact Test IS 1598
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
Rockwell Hardness Test
135 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti ASTM E18
(HRBW)
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
Rockwell Hardness Test
136 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti IS 1586 (Part 1)
(HRBW)
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
137 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti Rockwell Hardness Test (HRC) ASTM E18
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products - Steel, Steel
138 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti Rockwell Hardness Test (HRC) IS 1586 (Part 1)
OF METALS Alloys
MECHANICAL- Ferrous & Non-Ferrous Materials & Products- Steel, Steel
Brinell Hardness Test (5 mm/
139 MECHANICAL PROPERTIES Alloy, Cast Iron, Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloys, Ti-Ti IS 1500 (Part 1)
750 kgf)
OF METALS Alloys
MECHANICAL-
Rockwell Hardness Test
140 MECHANICAL PROPERTIES Ferrous Materials & Products - Steel, Steel Alloy, S.S. ASTM A370
(HRBW)
OF METALS
MECHANICAL-
141 MECHANICAL PROPERTIES Ferrous Materials & Products- Steel, Steel Alloy, S.S. Rockwell Hardness Test (HRC) ASTM A370
OF METALS
MECHANICAL-
Brinell Hardness Test (5
142 MECHANICAL PROPERTIES Ferrous Product - Steel, Steel Alloy, S.S ASTM A370
mm/750 kgf)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 9 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
Brinell Hardness Test (10
143 MECHANICAL PROPERTIES Ferrous Product - Steel, Steel Alloy, S.S. ASTM A370
mm/3000 kgf)
OF METALS
MECHANICAL-
144 MECHANICAL PROPERTIES Ferrous Products - Steel, Steel Alloy, Cast Iron Tensile Test (% E) IS 1608 (Part 1)
OF METALS
MECHANICAL-
145 MECHANICAL PROPERTIES Ferrous Products - Steel, Steel Alloy, Cast Iron Tensile Test (% RA) IS 1608 (Part 1)
OF METALS
MECHANICAL-
146 MECHANICAL PROPERTIES Ferrous Products - Steel, Steel Alloy, Cast Iron Tensile Test (0.1% PS) IS 1608 (Part 1)
OF METALS
MECHANICAL-
147 MECHANICAL PROPERTIES Ferrous Products - Steel, Steel Alloy, Cast Iron Tensile Test (UTS) IS 1608 (Part 1)
OF METALS
MECHANICAL-
148 MECHANICAL PROPERTIES Ferrous Products - Steel, Steel Alloy, Cast Iron Tensile Test (YS) IS 1608 (Part 1)
OF METALS
MECHANICAL-
Dimension (Diameter,
149 MECHANICAL PROPERTIES Flat/Pack Washer BS 4320
Thickness)
OF METALS
MECHANICAL-
Dimension (Diameter,
150 MECHANICAL PROPERTIES Flat/Pack Washer IS 2016
Thickness)
OF METALS
MECHANICAL-
Dimension (Diameter,
151 MECHANICAL PROPERTIES Flat/Pack Washer IS 5369
Thickness)
OF METALS
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
152 MECHANICAL PROPERTIES Bend Test IS 1599
TMT
OF METALS
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
153 MECHANICAL PROPERTIES Re-bend Test IS 1786
TMT
OF METALS
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
154 MECHANICAL PROPERTIES Tensile Test (% E) IS 1608 (Part 1)
TMT
OF METALS
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
155 MECHANICAL PROPERTIES Tensile Test (UTS) IS 1608 (Part 1)
TMT
OF METALS
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
156 MECHANICAL PROPERTIES Tensile Test (YS) IS 1608 (Part 1)
TMT
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 10 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
157 MECHANICAL PROPERTIES Dimension (Length, Diameter) IS 1786
TMT
OF METALS
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
158 MECHANICAL PROPERTIES Mass/ unit Length IS 1786
TMT
OF METALS
MECHANICAL-
High Strength Deformed Steel Bars, Reinforcement Bar,
159 MECHANICAL PROPERTIES Tensile Test ( 0.2% PS) IS 1608 (Part 1)
TMT
OF METALS
MECHANICAL-
160 MECHANICAL PROPERTIES Hot Rolled Steel (Beam, Column, Channel, Angle) Dimension - Angle IS 808
OF METALS
MECHANICAL-
161 MECHANICAL PROPERTIES Hot Rolled Steel (Beam, Column, Channel, Angle) Dimension - Linear IS 808
OF METALS
MECHANICAL-
162 MECHANICAL PROPERTIES Hot Rolled Steel (Beam, Column, Channel, Angle) Dimension - Radius IS 808
OF METALS
MECHANICAL-
163 MECHANICAL PROPERTIES Hot Rolled Steel (Beam, Column, Channel, Angle) Mass per meter IS 808
OF METALS
MECHANICAL-
164 MECHANICAL PROPERTIES Hot Rolled Steel (Bulb Angle) Dimension - Linear IS 1252
OF METALS
MECHANICAL-
165 MECHANICAL PROPERTIES Hot Rolled Steel (Bulb Angle) Mass per meter IS 1252
OF METALS
MECHANICAL-
166 MECHANICAL PROPERTIES Hot Rolled Steel (Channel Section) Dimension - Angle IS 3954
OF METALS
MECHANICAL-
167 MECHANICAL PROPERTIES Hot Rolled Steel (Channel Section) Dimension - Linear IS 3954
OF METALS
MECHANICAL-
168 MECHANICAL PROPERTIES Hot Rolled Steel (Channel Section) Dimension - Radius IS 3954
OF METALS
MECHANICAL-
169 MECHANICAL PROPERTIES Hot Rolled Steel (Channel Section) Mass per meter IS 3954
OF METALS
MECHANICAL-
170 MECHANICAL PROPERTIES Hot Rolled Steel (Parallel Beam and Column Section) Dimension - Linear IS 12778
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 11 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
171 MECHANICAL PROPERTIES Hot Rolled Steel (Parallel Beam and Column Section) Dimension - Radius IS 12778
OF METALS
MECHANICAL-
172 MECHANICAL PROPERTIES Hot Rolled Steel (Parallel Beam and Column Section) Mass per meter IS 12778
OF METALS
MECHANICAL-
173 MECHANICAL PROPERTIES Hot Rolled Steel (Plate, Sheet Strips and Flats) Dimension - Length IS 1730
OF METALS
MECHANICAL-
174 MECHANICAL PROPERTIES Hot Rolled Steel (Plate, Sheet Strips and Flats) Dimension - Thickness IS 1730
OF METALS
MECHANICAL-
175 MECHANICAL PROPERTIES Hot Rolled Steel (Plate, Sheet Strips and Flats) Dimension - Width IS 1730
OF METALS
MECHANICAL-
176 MECHANICAL PROPERTIES Hot Rolled Steel (Plate, Sheet, Strips and Flats) Mass per meter IS 1730
OF METALS
MECHANICAL-
177 MECHANICAL PROPERTIES Hot Rolled Steel (Round and Square Bar) Mass per meter IS 1732
OF METALS
MECHANICAL-
178 MECHANICAL PROPERTIES Metal and Alloys (Plate, Rod & Sheet) Bend Test ASTM A370
OF METALS
MECHANICAL-
179 MECHANICAL PROPERTIES Metal and Alloys (Plate, Rod & Sheet) Bend Test IS 1599
OF METALS
MECHANICAL-
Non-Ferrous Products - Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloy,
180 MECHANICAL PROPERTIES Tensile Test (% E) IS 1608 (Part 1)
Ti-Ti Alloy
OF METALS
MECHANICAL-
Non-Ferrous Products - Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloy,
181 MECHANICAL PROPERTIES Tensile Test (% RA) IS 1608 (Part 1)
Ti-Ti Alloy
OF METALS
MECHANICAL-
Non-Ferrous Products - Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloy,
182 MECHANICAL PROPERTIES Tensile Test (0.1% PS) IS 1608 (Part 1)
Ti-Ti Alloy
OF METALS
MECHANICAL-
Non-Ferrous Products - Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloy,
183 MECHANICAL PROPERTIES Tensile Test (UTS) IS 1608 (Part 1)
Ti-Ti Alloy
OF METALS
MECHANICAL-
Non-Ferrous Products - Cu-Cu Alloy, Al-Al Alloy, Ni-Ni Alloy,
184 MECHANICAL PROPERTIES Tensile Test (YS) IS 1608 (Part 1)
Ti-Ti Alloy
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 12 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
Dimension (Diameter,
185 MECHANICAL PROPERTIES Spring Washer BS 4464
Thickness, Width, Free Height)
OF METALS
MECHANICAL-
Dimension (Diameter,
186 MECHANICAL PROPERTIES Spring Washer DIN-128
Thickness, Width, Free Height)
OF METALS
MECHANICAL-
Dimension (Diameter,
187 MECHANICAL PROPERTIES Spring Washer IS 3063
Thickness, Width, Free Height)
OF METALS
MECHANICAL-
188 MECHANICAL PROPERTIES Spring Washer Permanent Load Test BS 4464
OF METALS
MECHANICAL-
189 MECHANICAL PROPERTIES Spring Washer Permanent Load Test DIN 267 - 5
OF METALS
MECHANICAL-
190 MECHANICAL PROPERTIES Spring Washer Permanent Load Test IS 3063
OF METALS
MECHANICAL-
191 MECHANICAL PROPERTIES Spring Washer Permanent Set Test IS 3063
OF METALS
MECHANICAL-
192 MECHANICAL PROPERTIES Spring Washer Twist Test BS 4464
OF METALS
MECHANICAL-
193 MECHANICAL PROPERTIES Spring Washer Twist Test DIN-127
OF METALS
MECHANICAL-
194 MECHANICAL PROPERTIES Spring Washer Twist Test IS 3063
OF METALS
MECHANICAL-
195 MECHANICAL PROPERTIES Steel, Steel Alloy, Cast Iron Tensile Test (0.2% PS) IS 1608 (Part 1)
OF METALS
MECHANICAL-
196 MECHANICAL PROPERTIES Steel, Steel Alloy, Cast Iron Tensile Test (YS) ISO 898 (Part 1)
OF METALS
MECHANICAL-
197 MECHANICAL PROPERTIES Weld Metal (Ferrous) Face Bend (Butt Weld) ASME Section IX (Clause 462.3)
OF METALS
MECHANICAL-
198 MECHANICAL PROPERTIES Weld Metal (Ferrous) Root Bend (Butt Weld) ASME Section IX (Clause 462.3)
OF METALS

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 13 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL-
199 MECHANICAL PROPERTIES Weld Metal (Ferrous) Side Bend (Butt Weld) ASME Section IX (Clause 462.2)
OF METALS
MECHANICAL-
200 MECHANICAL PROPERTIES Welded Metal Tensile Test (UTS) ASME Section IX
OF METALS
MECHANICAL-
201 MECHANICAL PROPERTIES Welded Metal Tensile Test (UTS) BS EN ISO 15614
OF METALS
Coating Thickness
MECHANICAL-
202 Ferrous Products - Steel, Steel Alloy, Cast Iron Measurement (By Microscopic IS 3203
METALLOGRAPHY TEST
Method)
Coating Thickness
MECHANICAL-
203 Ferrous Products - Steel, Steel Alloy, Cast Iron Measurement (by Magnetic IS 3203
METALLOGRAPHY TEST
Method)
MECHANICAL- Micro Examination (By
204 Ferrous Products - Steel, Steel Alloy, Cast Iron ASM Volume 9
METALLOGRAPHY TEST Microscope)
Coating Thickness
MECHANICAL-
205 Metal and Alloy Measurement (by Microscopic ASTM B487
METALLOGRAPHY TEST
Method)
MECHANICAL- SOIL AND
206 Soil/ Murrum California Bearing Ratio IS 2720 (Part 16)
ROCK
MECHANICAL- SOIL AND
207 Soil/ Murrum Free Swell Index IS 2720 (Part 40)
ROCK
MECHANICAL- SOIL AND Grain Size Analysis (Sieve Size:
208 Soil/ Murrum IS 2720 (Part 4)
ROCK 2 µm to 63 mm)
MECHANICAL- SOIL AND
209 Soil/ Murrum Heavy Compaction (MDD) IS 2720 (Part 8)
ROCK
MECHANICAL- SOIL AND
210 Soil/ Murrum Heavy Compaction (OMC) IS 2720 (Part 8)
ROCK
MECHANICAL- SOIL AND
211 Soil/ Murrum Light Compaction (MDD) IS 2720 (Part 7)
ROCK
MECHANICAL- SOIL AND
212 Soil/ Murrum Light Compaction (OMC) IS 2720 (Part 7)
ROCK
MECHANICAL- SOIL AND
213 Soil/ Murrum Liquid Limit IS 2720 (Part 5)
ROCK

MECHANICAL- SOIL AND

214 Soil/ Murrum Moisture/ Water Content IS 2720 (Part 2)
ROCK
MECHANICAL- SOIL AND
215 Soil/ Murrum Plastic Limit IS 2720 (Part 5)
ROCK

This is annexure to 'Certificate of Accreditation' and does not require any signature.
Laboratory Name : CEMA TESTING LABORATORY, 28, AYODHYA NAGAR, NAGPUR, MAHARASHTRA, INDIA
Accreditation Standard ISO/IEC 17025:2017
Certificate Number TC-11250 Page No 14 of 14
Validity 31/12/2022 to 30/12/2024 Last Amended on -

Component, parameter or Test Method Specification

characteristic tested / against which tests are
S.No Discipline / Group Materials or Products tested Specific Test Performed / performed and / or the
Tests or type of tests techniques / equipment
performed used
MECHANICAL- SOIL AND
216 Soil/ Murrum Shrinkage Limit IS 2720 (Part 6)
ROCK
MECHANICAL- SOIL AND
217 Soil/ Murrum Specific Gravity IS 2720 (Part 3)
ROCK
MECHANICAL- SOIL AND
218 Stone/ Rock Saturated/ Dry Density IS 13030
ROCK
MECHANICAL- SOIL AND
219 Stone/ Rock Uniaxial Compressive Strength IS 9143
ROCK
MECHANICAL- SOIL AND
220 Stone/ Rock Water Content IS 13030
ROCK
MECHANICAL- SOIL AND
221 Stones/ Rock Porosity IS 13030
ROCK
MECHANICAL- WOOD AND
222 Particle Board Density IS 2380 (Part 3)
WOOD PRODUCTS
MECHANICAL- WOOD AND
223 Particle Board Moisture Content IS 2380 (Part 3)
WOOD PRODUCTS
MECHANICAL- WOOD AND
224 Particle Board Swelling in Water IS 2380 (Part 17)
WOOD PRODUCTS
MECHANICAL- WOOD AND
225 Particle Board Water Absorption IS 2380 (Part 16)
WOOD PRODUCTS
MECHANICAL- WOOD AND
226 Timber Moisture Content IS 1708 (Part 1)
WOOD PRODUCTS
MECHANICAL- WOOD AND
227 Timber Specific Gravity IS 1708 (Part 2)
WOOD PRODUCTS

This is annexure to 'Certificate of Accreditation' and does not require any signature.