GUIA BASICA CONFIGURACION SWITCH 3COM
1.- Asignación de nombre de switch
<4210>system-view
[4210]sysname switch
[switch]
2.- Asignación de IP a interface vlan 1
<switch>system-view
[switch]interface Vlan-interface 1
[switch-Vlan-interface1]ip address 192.168.1.1 255.255.255.0
[switch-Vlan-interface1]undo shutdown
[switch-Vlan-interface1]quit
[switch]
3.- Crear Vlan’s
<switch>system-view
[switch]vlan 10
[switch-vlan10]name DATOS
[switch-vlan10]quit
[switch]vlan 11
[switch-vlan11]name VOZ
[switch-vlan11]quit
[switch]vlan 300
[switch-vlan300]name GESTION-SW
[switch-vlan300]quit
[switch]
4.- Configurar vlan de DATOS y de VOZ en un puerto de usuario
[switch]interface Ethernet 1/0/1
[switch-Ethernet1/0/1]port link-type hybrid
[switch-Ethernet1/0/1]port hybrid pvid vlan 10
[switch-Ethernet1/0/1]port hybrid vlan 10 untagged
[switch-Ethernet1/0/1]undo port hybrid vlan 1
[switch-Ethernet1/0/1]port hybrid vlan 11 tagged
[switch-Ethernet1/0/1]voice vlan enable
[switch-Ethernet1/0/1]quit
5.- Configurar un puerto como enlace troncal
[switch]interface Ethernet 1/0/48
[switch-Ethernet1/0/48]undo stp edged-port
[switch-Ethernet1/0/48]undo loopback-detection enable
[switch-Ethernet1/0/48]port link-type trunk
[switch-Ethernet1/0/48]port trunk permit vlan 1 10 11
[switch-Ethernet1/0/48]port trunk pvid vlan 1
[switch-Ethernet1/0/48]quit
5.- Acceso por SSH y creación de usuario / deshabilitar acceso telnet
[switch]local-user admin
[switch-luser-admin]password cipher admin
[switch-luser-admin]service-type ssh
[switch-luser-admin]level 3
[switch-luser-admin]quit
[switch]
[switch]ssh user admin authentication-type password
[switch]ssh user admin service-type stelnet
[switch]ssh authentication-type default password
[switch]ssh user admin
[switch]user-interface vty 0 4
[switch-ui-vty0-4]authentication-mode scheme
[switch-ui-vty0-4]protocol inbound ssh <= con esto deshabilitas acceso ssh
[switch-ui-vty0-4]quit
[switch]rsa local-key-pair create
The local-key-pair will be created.
The range of public key size is (512 ~ 2048).
NOTES: If the key modulus is greater than 512,
It will take a few minutes.
Input the bits in the modulus[default = 1024]:1024
Generating keys...
.......++++++
..............++++++
.....++++++++
....................++++++++
..Done!
[switch]
Agregar usuario consola
[P02-SW02-MAGDALENA]local-user admincgr
[P02-SW02-MAGDALENA-luser-admincgr]service-type ?
ftp FTP service type
lan-access LAN-ACCESS service type
ssh SECURE SHELL service type
telnet TELNET service type
terminal TERMINAL service type
[P02-SW02-MAGDALENA-luser-admincgr]service-type ssh terminal
6.- Desactivar http
<4210>system-view
[4210]ip http shutdown
7.- Después de crear usuario admincgr, eliminar usuarios por defecto
[4210]undo local-user manager
[4210]undo local-user monitor
[4210]undo local-user admin
