MM1012 Programmable Logic Controller

Features:
! Upto 6 Digital inputs
! Upto 4 Digital Relay Outputs
! Two Analog Inputs

Size: 48mm x 96mm

Technical Specifications Communication:

Display Communication Ports RS485 ports [slave]

Display 7 segment LED Communication Protocol MODBUS RTU

Digits 3 digit + [4+4] digit

No. Of keys 5 numeric keys, 4 User Configurable Functional Features

Timer Operational Modes On Delay, Off Delay, Pulse Special

Input Specifications [Up / Down] Timer
Time Resolution 1ms
Digital Input
Time Display Format Sec, Min, Hr, Day, Min. Sec, Hr.Min, Day.Hr.
No. Of digital input 6
Counter Up Counter, Down Counter &
Input Type PNP
Up/Down Counter
Input Voltage Range 11-28 VDC [abs. max.: 30 VDC]
Other Blocks PID Control with auto tune, Analog input
Response Time Programmable upto 1 to 255ms from Front End
Memory Retention 10 years
(Default 10ms)(Also depends on ladder execution time)
Isolation 2 kV
Analog Input
Supply Voltage
No. Of Input / Type 2
TC / RTD / 0-10V / 0-20 mA [User selectable] Supply Voltage 24V DC for MM1012-24V
Accuracy 13.5 bits 90-270 VAC / DC for MM1012-230V

Resolution 16 bits
Environmental Specifications

Output Specifications Temperature Operating : 0 to 50C

Storage : -20 to 60C
Digital Output - Relay Humidity (non-condensing) 95% RH
No. of Relay Output 4 [Relay] Weight 258gms
Contact Rating NO type; 5A resistive@240V AC
Isolation 2 KV Dimensions (in mm)
Response Time 20 ms Panel Cutout

Functional Specifications: 50 45 46

Programming Method Windows based software for ladder

programming and HMI Configuration. 88 92
97.5 10
[Product selection in Selpro software-MM1012]
Memory Data memory: 16K
Code memory: 223K
Upload memory: NA
No. of Objects Maximum 5000 [as per memory]
Minimum Scan Time 200 µsec
Typical Scan Time 1 ms [Also depends on ladder programming]

www.selec.com 1
 MM1012 Programmable Logic Controller

Terminal Connections Ordering Information

MM1012-24V
CH1 CH2
Product Order Code

NTC SENSOR
TC + /RTD1

TC /RTD2
TC + /RTD1

TC /RTD2

ANA IP +
ANA IP +

ANA IP -
ANA IP -
MM1012-24V

-
-
MM1012

RTD3
RTD3
I2 I1 I0 MM1012-230V

1 2 3 4 5 6 7 8 9 10
Accessories (To be ordered separately)
CH1 CH2
22 I3 24
J1 J2 J3 J4 J5 J1 J2 J3 J4 J5 Communication cable ACH - 001
Internal jumper for Internal jumper for
21 I4 sensor selection sensor selection 23 Windows-based software
for ladder programming ACD-003
11 12 13 14 15 16 17 18 19 20 Power Supply module AP-24V-500mA-NS131
I5 NO0 NO1 NO2 NO3 COM +24V GND
converter
RS485 on side terminal RS485 to RS232 converter AC - RS485 - RS232 - 01 (Non-Isolated)
For TC/RTD Short J4 & J5
RS485+ For Volt Short J3 & J4
RS485- For Current Short J1 & J2 AC - RS485 - RS232 - ISO (Isolated)
Front side view Back side view

CH1 CH2
NTC SENSOR
TC + /RTD1

TC /RTD2
TC + /RTD1

TC /RTD2

MM1012-230V
ANA IP +
ANA IP +

ANA IP -
ANA IP -

-
-

RTD3
RTD3

I2 I1 I0

1 2 3 4 5 6 7 8 9 10
CH1 CH2
22 I3 24
J1 J2 J3 J4 J5 J1 J2 J3 J4 J5
Internal jumper for Internal jumper for
21 I4 sensor selection sensor selection 23

11 12 13 14 15 16 17 18 19 20
I5 +24V GND NO0 NO1 NO2 NO3 COM
L(+) N(-)

RS485 on side terminal

For TC/RTD Short J4 & J5
RS485+ For Volt Short J3 & J4
RS485- For Current Short J1 & J2
Front side view Back side view

www.selec.com 2