PR502 Temperature Controller - Profile

Features:
! Ramp / Soak Control
! 4+4 Digits, 7 Segment LED Dual Display
! LED Status Indicator : Relay ON, Tune, Alarm, Manual
! 4 Front Panel Control buttons
! TC / RTD Input, Analog Input
! ON - OFF / PID Control
o
! C / oF Selectable
! 10 Programs, 16 Steps Each
! Alarm at Each Step
48 x 48mm ! Memory Retention
Certifications :

Display Specifications Functional Specifications

Display 4+4 Digits 7 Segment LED Dual Display Control Action 1) PID Control with Auto tuning
Height of Upper Display : 10mm 2) ON-OFF Control
Height of Lower Display : 7mm Proportional Band (P) 0.0 to 400.0o
LED Indications Relay ON, Alarm, Manual mode, Tune Integral Time (I) 0 to 3600 sec
Derivative Time (D) 0 to 200 sec
Input Specifications Alarm
Modes Deviation high, Deviation low, Band, Full scale
Inputs Thermocouple (J, K, T, R, S, C, E, B, N, L, U, W,
high, Full scale low, Sensor break
Platinel II), RTD (PT100)
DC Analog inputs (-5 to 56mV, 0 to 10V, Operation Absolute / Deviation mode
0 to 20mA) Hysteresis Programmable
Resolution 1 / 0.1o for TC / RTD only Hold / Standby mode Programmable
( Fixed 1° resolution for R & S type TC)
Annuniator Programmable
Decimal point position selectable :
1 / 0.1 / 0.01 / 0.001 for analog input Reset Action Programmable - Automatic or Latched
Indication Accuracy For TC inputs : 0.25% of F.S. ±1o
Probe Break Action Upscale
For R & S type TC inputs : 0.5% of F.S. ±2o Profile
(20 min of warm up time for TC inputs)
For RTD input : 0.1% of F.S. ±1o No. of Profiles 10
For Analog input : ±0.5%, ±1 digit No. of Steps 16 each
(F.S. = Full Scale) Ramp/Soak Time Range 0.01 to 99.59 Hrs : Min
o
Temperature Unit C / oF Selectable Target Temperature Range SPLL to SPHL
Input Filter (FTC) 1 to 99 sec Other Profile Parameters Link profiles, Programmable repeat cycle,
Sampling time 200 ms Power down resume / Reset options, Deviation
hold, Alarm at each step with settable alarm
duration
Output Specifications

Control Output (Optional) 1 Auxiliary Supply Specifications

Relay Contact (SPST) 5A @ 230V AC / 30V DC, resistive Supply Voltage 85 to 270V AC / DC (50 / 60Hz)
Current 4 to 20mA DC (loop impedance : 500Ω max.) Power Consumption 5 VA max @ 230V AC
Auxiliary Output (Optional) 1
Relay Contact (SPST) 5A @ 230V AC / 30V DC, resistive
Environmental Specifications

Temperature Operating : 0 to 50oC (32 to 122oF)

Storage : -20 to 75oC (-4 to 167oF)
Humidity (non-condensing) 85% max. RH from 0 to 50oC

Mechanical Specifications

Mounting Panel Mount

Weight 195 gms

www.selec.com 1
 PR502 Temperature Controller - Profile

Dimensions Ordering Information

SUPPLY
Panel Cutout PRODUCT CODE OUTPUT 1 OUTPUT2
VOLTAGE
CERTIFICATION

PR502-0-0-0-CE

45mm
RELAY RELAY 85-270V AC/DC

46mm
48mm

PR502-2-0-0 4-20mA (Current) RELAY 85-270V AC/DC

48mm 100mm 46mm
10mm

Accessories (Optional)
Standard SELEC accessories that can be used with this product.
Terminal Connections
Adapter plate
1) AP7248 : Plastic adapter plate, used to mount 1 / 16 DIN (cutout size 48 x 48)
Instrument into existing (72 x 72) cutout size.
2) AP9648 : Plastic adapter plate, used to mount 1 / 16 DIN (cutout size 48 x 48)
Instrument into existing (96 x 96) cutout size.
3) AP4896-4848-G-C : Plastic adapter plate, used to mount 1 / 16 DIN
(cutout size 48 x 48) Instrument into existing (48 x 96)
cutout size.

Mounting Accessories (Supplied with units)

48 X 48 Collar clamp ACL4802

Input Ranges (For TC / RTD Input)

Compliance

Applicable EMI / EMC Standards Resolution Ranges

Product Standard : IEC 61326-1 Sensor Type

1 0.1
Category Standards Compliance o
C -150 to 850 -150 to 850
Pt100
ESD Immunity IEC 61000-4-2 Level III o
F -238 to 1562 -199 to 999
+/- 2 kV common mode, o
C -199 to 750 -199 to 750
Surge Immunity IEC 61000-4-5
+/- 1 kV differential mode J o
Level III, 80 to 1000MHz F -328 to 1382 -199 to 999
Radiated Susceptibility IEC 61000-4-3 Level II, 1.4GHz to 2GHz o
Level I, 2GHz to 2.7GHz C -199 to 1350 -199 to 999
K
Conducted Susceptibility IEC 61000-4-6 Level II o
F -328 to 2462 -199 to 999
Dips : 0% residual voltage / o
1 cycle (Criteria B), 40% residual voltage / C -199 to 400 -199 to 400
10 cycles 50Hz / 12 cycles 60Hz T
o
Voltage Dips and F -328 to 750 -199 to 750
IEC 61000-4-11 (Criteria C)70% residual voltage /
Interruptions 25 cycles50Hz / 30 cycles 60Hz o
(Criteria C) C 0 to 1750 N/A
R&S
Interruptions : 0% residual voltage / o
F 32 to 3182 N/A
250 cycles 50Hz / 300 cycles 60Hz
(Criteria C)
Conducted Emission CISPR-11
Radiated Emission CISPR-11
Electrical Fast Transient IEC 61000-4-4 Level III

www.selec.com 2