Scribd
Upload
42 views

How To Block HTTP Downloads or Uploads of Specific File Extensions Using App Rules

This document provides instructions for blocking HTTP downloads or uploads of specific file extensions using App Rules on SonicWall firewalls running SonicOS 7.X, 6.5, and 6.2 or below. The steps include creating a match object with the file extensions to block, creating an App Rule with that match object and an action to reset or drop matching traffic, and optional settings for sources, schedules, and included or excluded users. A caution is given that App Rules cannot block encrypted traffic without DPI-SSL enabled on the SonicWall.

Uploaded by

sreejishtpk
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
42 views

How To Block HTTP Downloads or Uploads of Specific File Extensions Using App Rules

This document provides instructions for blocking HTTP downloads or uploads of specific file extensions using App Rules on SonicWall firewalls running SonicOS 7.X, 6.5, and 6.2 or below. The steps include creating a match object with the file extensions to block, creating an App Rule with that match object and an action to reset or drop matching traffic, and optional settings for sources, schedules, and included or excluded users. A caution is given that App Rules cannot block encrypted traffic without DPI-SSL enabled on the SonicWall.

Uploaded by

sreejishtpk
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

View Page online: https://www.sonicwall.

com/support/knowledge-base/how-to-block-http-downloads-or-uploads-of-specific-file-extensions-using-app-rules/170503921808804/

How to Block HTTP Downloads or


Uploads of Specific File Extensions Using
App Rules
Description
At times it may be necessary to block entire File Extensions from entering or leaving your network.
Blocking file extensions from emails and other communication is a common practice to help prevent
CryptoLocker attacks, leaking sensitive company data, and other intrusions or violation of network policy.

The SonicWall can block downloads for any File Extension going over HTTP, FTP, and other unencrypted
Protocols. This is performed using the App Rules Feature as demonstrated below.

CAUTION: By default the SonicWall cannot block File Extensions over HTTPS or other Encrypted
Protocols. This is because the SonicWall cannot examine encrypted payloads, to get around this DPI-SSL is
required as a Feature on the SonicWall.

Resolution for SonicOS 7.X


This release includes significant user interface changes and many new features that are different from the
SonicOS 6.5 and earlier firmware. The below resolution is for customers using SonicOS 7.X firmware.

1. Log in to the SonicWall Management GUI.

2. Click on Object | Match Objects | Match Objects3. and click on "Add4. ".

5. Set Match Object Type6. to "HTTP URI Content7. ".

8. Add all File Extensions that you would like to block (".ZIP", ".RAR" and ".EXE" in this example).
1. Navigate to Policy | Rules and Policies | App Rules 2. and click on "Add3. ". Enter a Friendly Name
under "Policy Name4. ".

5. Set Policy Type to "HTTP Client, SMTP Client, FTP Client, or POP3 Client" 6. depending on which
Protocol you're attempting to block. Specify Source 7. or Destination Address8. if needed, Any will apply
to all traffic.

TIP: It's possible to block a wide range or Protocols depending on the Policy Type. Custom Policies are
Protocol neutral and block by Match Object.

1. Set "Match Object2. " to the one that you've already created.

3. Set Action Object 4. to Reset/Drop5. .

6. Set Users/GroupsIncluded7. or Excluded8. as required.

TIP: Users/Groups provide a powerful way to exclude or include only specific Users in the App Rules
Policy. App Rules can make use of LDAP Groups or Local Groups.
TIP: It is possible to set additional fields, such as Schedule and Direction, to further specify when and
where a Policy should be applied.

CAUTION: Once again, App Rules cannot block HTTPS Content without DPI-SSL setup on the
SonicWall.

Resolution for SonicOS 6.5


This release includes significant user interface changes and many new features that are different from the
SonicOS 6.2 and earlier firmware. The below resolution is for customers using SonicOS 6.5 firmware.

1. Login to the SonicWall Management GUI.

2. Click on MANAGE ,Navigate to Objects | Match Objects and click on "Add New Match Object".

3. Set Match Object Type to "HTTP URI Content".

4. Add all File Extensions that you would like to block (".ZIP", ".RAR" and ".EXE" in this example).
5. Navigate to Rules | App Rules and click on "Add New Policy". Enter a Friendly Name under "Policy
Name".

6. Set Policy Type to "HTTP Client, SMTP Client, FTP Client, or POP3 Client" depending on which
Protocol you're attempting to block. Specify Source or Destination Address if needed, Any will apply to all
traffic.

TIP: It's possible to block a wide range or Protocols depending on the Policy Type. Custom Policies are
Protocol neutral and block by Match Object.

7. Set "Match Object" to the one that you've already created.

8. Set Action Object to Reset/Drop.

9. Set Users/Groups Included or Excluded as required.

TIP: Users/Groups provides a powerful way to exclude or include only specific Users in the App Rules
Policy. App Rules can make use of LDAP Groups or Local Groups.

TIP: It is possible to set additional fields, such as Schedule and Direction, to further specify when and
where a Policy should be applied.

CAUTION: Once again, App Rules cannot block HTTPS Content without DPI-SSL setup on the
SonicWall.

Resolution for SonicOS 6.2 and Below


The below resolution is for customers using SonicOS 6.2 and earlier firmware. For firewalls that are
generation 6 and newer we suggest to upgrade to the latest general release of SonicOS 6.5 firmware.

1. Login to the SonicWall Management GUI.

2. Navigate to Firewall | Match Objects and click on "Add New Match Object".

3. Set Match Object Type to "HTTP URI Content".

4. Add all File Extensions that you would like to block (".ZIP", ".RAR" and ".EXE" in this example).
5. Navigate to Firewall | App Rules and click on "Add New Policy". Enter a Friendly Name under "Policy Name
".

6. Set Policy Type to "HTTP Client, SMTP Client, FTP Client, or POP3 Client" depending on which Protocol
you're attempting to block. Specify Source or Destination Address if needed, Any will apply to all traffic.

TIP: It's possible to block a wide range or Protocols depending on the Policy Type. Custom Policies are
Protocol neutral and block by Match Object.

7. Set "Match Object" to the one that you've already created.

8. Set Action Object to Reset/Drop.

9. Set Users/Groups Included or Excluded as required.


TIP: Users/Groups provides a powerful way to exclude or include only specific Users in the App Rules
Policy. App Rules can make use of LDAP Groups or Local Groups.

TIP: It is possible to set additional fields, such as Schedule and Direction, to further specify when and
where a Policy should be applied.

CAUTION: Once again, App Rules cannot block HTTPS Content without DPI-SSL setup on the
SonicWall.

You might also like