998-20710038 - Eliwell - NA - 2019a - Catalog - GMA - Brochure

SOLUTIONS for
Refrigeration
North America Catalog
REL. NA2019.01
www.eliwell.com
2
Index
Introduction 4-7
Solutions for Small Stores 8-25

Solutions for Small Stores Connected any time, anywhere 8
Right Controller for Every Application For self-contained equipment 9
EcoStruxure™ for Small Stores Ensuring your business is always on the go 10
EcoStruxure™ for Restaurants Ensuring asset protection and a welcoming ambiance 11
nEW Replace electromechanical 12
EWPlus Series Applications with energy saving features for DOE 13
EWPlus EO Series High energy saving solutions 14
EWPlus 978 Solutions for double evaporator and double compressor 15
KDE-KDT-ECPlus series user interfaces User interfaces for RT family 16
RTN400 Series Connectable controllers for self contained equipments 17
Selection guide for controllers 18-19
EWSense Wireless system for temperature and humidity monitoring 20-21
EcoStruxure™ Machine Advisor Digital service platform for machine builders 22
EcoStruxure™ Facility Expert Optimizing the operational cost of your Stores 23
Eliwell connectivity Solution for RTN400
Eliwell™ TelevisAir 24
by RTN400 Wireless tool for Service team
TM172P Datalogger Application Thru Wifi or BMS in a store/restaurant by service team 25
Solutions for Large Stores 26-41

Innovative Solutions for Supermarkets 26
Compressor Rack Managers Product Range Scalable from simple condensing unit to CO2 transcritical Racks 27
Architecture of Large Store Refrigeration control and remote maintenance 28-29
Index 3
TM171O Condensing Unit Application Improve efficiency & allow connectivity 30

EWCM 400D PRO Parametric compact controllers for compressor racks 31
TM172 Condensing Unit “Title 24” Compliant with California Title 24 32
TM172 for Case- Cold Box Control Optimal control and asset management 33
EWCM 9000 PRO-HF HFC-HFO Programmable controller with single and double circuit compressor rack 34
CO2 Transcritical System Transcritical CO2 booster / parallel compression application 35
TM171VEV EVV Stepper System 36
EEV Stepper System V910 driver for motorized electronic valve control 37
TelevisGo Monitoring and maintenance system via web 38-39
EcoStruxure™ Building Seamless integration for greater productivity in your supermarket 40
Operation & TelevisGo
EcoStruxure™ Augmented Real-time information at your fingertips 41
Operator Advisor
Variable Speed Drives 42-44

TM172P for Condenser Control Peak performance and maximum energy savings 45
Sensors 46-49
NTC, PTC & TC Probes NTC semi-conductor temperature probes 46
Humidity & Temperature Sensors 47

EWPA 007 - 030 - 050 Pressure transducers & Radiometric transducers 48-49
Electromechanical 50-58
D17P Adjustable single pressure controllers 50-51
D17P Adjustable dual pressure controllers 52-53
D16T Adjustable temperature controllers 54-55
Accessories D Controls Accessories for D pressure and temperature controllers 56
DeviceManager Controller configuration software 58
4
Introduction
Introducing Schneider Electric EcoStruxure™

INTRODUCTION
Schneider Electric EcoStruxure™ is our open, interoperable system architecture and platform
realizing the benefits of the Industrial Internet of Things, or IIoT, for our customers. This
allows for the delivery of enhanced value and safety, reliability, efficiency, sustainability,
and connectivity. It leverages advancements in IoT, mobility, sensing, cloud, analytics and
cybersecurity to deliver innovation at every level. To date, EcoStruxure™ has been deployed in
450,000+ installations, with the support of 9,000 system integrators, connecting over
1 billion devices.
SOLUTIONS FOR SMALL STORES
SOLUTIONS FOR LARGE STORES
EcoStruxure™ brings all the innovation that makes up the IIoT into an architecture that can
benefit you as an OEM. This allows you to more easily incorporate IIoT-based innovations into
your machines to differentiate yourself from competitors and meet your customer’s expanding
VARIABLE SPEED DRIVES
need for connected solutions.
The EcoStruxure™ architecture is based on a three-tiered technology stack, bringing energy,

automation and software together for you. The stack includes:
• Connected Products – Intelligent products that serve as the foundation for smarter
machines, buildings and plants for incorporation into your machine designs.
• Edge Control – Control systems that enable simple design, commissioning, and monitoring
requiring less complexity for you to manage.
• Apps, Analytics and Services – A full portfolio of hardware-agnostic software, apps, and
analytics to enable optimization within your customer’s existing system, avoiding a costly ‘rip
SENSORS
and replace’ solution.
EcoStruxure™ for Retail Chains brings together Energy, Automation and Software technology
into one integrated architecture resulting in a convergence specific to the refrigeration
industry. This architecture brings together smart, connected products with monitoring
ELECTROMECHANICAL
capabilities and management software to help you design, build and maintain more efficient,
cost-effective products.
Introduction 5
In addition to meeting customer demands for sustainability, we are bringing IoT-enabled
INTRODUCTION
systems and devices to retail industry to provide better planning and management, boost
efficiency, prevent business loss, and create an engaging, unique shopping experience for
customer with exciting in-store technology.
Building on 100+ years of Schneider Electric expertise and technology, EcoStruxure™ for Retail
Chains makes the complex simple and ensures connectivity across your portfolio, giving you
best-in-class refrigeration, environment, energy and security control across your assets. We offer
a tailored view to provide relevant information to the store operator right through to the CEO.

For example, operational costs are identified and managed proactively through IoT devices.
EcoStruxure™ for Retail Chains is an IoT architecture and platform which provides the bridge
between the traditional store operations to cloud-based I.T applications, with the exponential
shift towards IoT deployment, this ensures that operations are future proofed, and customers
have the confidence that emerging technologies will be integrated seamlessly.
Business Continuity: Ensuring the business remains operational 24/7 and protecting the
bottom line through loss prevention.
Operational Efficiency: Saving costs on staff by providing intelligent and connected systems
for store operators. We aim to have a real-time platform to reduce staff work load so they can

concentrate on serving customers.
Customer Experience: Providing a comfortable, engaging environment to boost customer
satisfaction and increase revenue. With IoT’s help, also an opportunity to engage in-store
technology to bring the customer experience to the maximum level, such as beacons to notify
customers about promotions.
Energy & Sustainability: Delivering IoT-based, multi-store analytics and reporting systems to
the supermarket industry, helping brands to achieve sustainability KPIs and meet environmental
regulations.
Improve sustainability, efficiency and traceability in your operations
!

EcoStruxure™ program results
Environmental sustainability Operational efficiency

Reduce carbon and water footprint Eliminate the Energy Waste from your facility
Total cost of ownership Flexibility and brand promise

Reduce capital and operating expenditure needs Meet consumer demand with the right products
at the right time
Machine safety and consumer information

Protect both consumer and shareholder value SENSORS
EcoStruxure™ Machine Advisor for OEMS self-contained equipment, to follow up

equipment's during warranty period
EcoStruxure™ Facility Expert for Integrators or store owner to optimize efficiency in Small
Stores and Restaurants
ELECTROMECHANICAL
EcoStruxure™ Building Operation for OEMs or integrators to optimize operation cost in

Supermarkets
EcoStruxure™ Augmented Operator Advisor for service teams (OEMs, integrators) to
simplify maintenance in supermarkets
6
Refrigeration Control
From Self-Contained Equipment...
INTRODUCTION
Small Stores
• Convenience, discount and
liquor stores
• Mostly self contained cases &
cold boxes
• Trend for RDMC to improve
maintenance
• Restaurants & food service

EcoStruxure™ Machine Advisor

EcoStruxure™ Facility Expert
• Monitoring and remote maintenance
• Cloud based
Condensing Units
• Medium and Low
Self Contained Cases temperature
• Full line offering
SENSORS
from optimized to
performance
• Propane with
variable speed
compressor Reach-In Cases
• Anti-sweat control
• Lighting control
ELECTROMECHANICAL
Refrigeration Control 7
...To supermarket Architectures
INTRODUCTION
Neighborhood & Large Stores
• Neighborhood
stores, warehouse
clubs
• Compressor racks,
remote cases

& cold boxes
• Ideal for multi-site
applications

EcoStruxure™ Building Operation
• Local & remote monitoring and maintenance
• Instant alarming, 24/7 service

• Energy management
CO2 racks
Small systems • Transcritical
• HFO - HFC • Booster and Parallel
• Rooftop formats Compression
• Remote Condenser
SENSORS
Remote cases Cold rooms

• Trend towards • EEV control
decentralized
ELECTROMECHANICAL
systems
• EEV control
8
Solutions for Small Stores
Connected any time, anywhere
Industry Challenges
INTRODUCTION
• ENERGY COSTS: With increasing energy costs, it is paramount to improve

energy efficiencies of refrigeration equipment running 24/7.
• GOVERNMENT REGULATIONS: Increasing regulatory demands with DOE 2017, EPA,

Energy Star and California Title 24 on efficiencies, refrigerants, and insulating materials.
• REFRIGERANT REQUIREMENTS: With the EPA ban of common refrigerants and the need
to improve efficiency, new refrigerants such as R290 and CO2 are becoming more prevalent.
• COMPETITIVENESS IN A CHANGING MARKETPLACE: New strategies and technologies

are emerging to meet new challenges, all while achieving a quick ROI.
EcoStruxure™ Facility Expert EcoStruxure™ Machine Advisor

for Chain Maintenance Managers for HVAC/R OEM
Router
EWSense
• Temperature,
humidity and
CO2 acquisition with
wireless sensors.
SENSORS
ELECTROMECHANICAL
The Right Controller for Every Application 9
For self-contained and warming equipment
INTRODUCTION
Modicon M171O
• Fully customized solutions

RTN 400SM
• Controller for variable speed compressor
RTN 400
• For connectable cases
• Semi-customizable modular controller
and keypad system
User Interfaces
KDT – KDEPlus - ECPlus

• Touch user interfces
Features
Mid-Temp Low-Temp
Models 961/971 Model 974
EWPlus EO Smart

• Enhanced energy savings with self-learning
requires less set-up and commissioning
EWPlus EO
• EW Plus with enhanced algorithms saving
up to 39% over electro-mechanical and
19% over traditional controls
EWPlus
• Versatile cooling and heating applications,
display colors, with energy saving features
for DOE 2017
SENSORS
nEW
• Cost effective replacement for electro
mechanical controls with energy saving
features for DOE 2017
ELECTROMECHANICAL
10
EcoStruxure™ for Small Stores
Ensuring your business is always running efficiently
EcoStruxure™ Machine Advisor

INTRODUCTION
Internet Router
BACnetIP
RTN400 EWSense TM172 EWSense

KDEPlus Gate Gate
SENSORS
EWSense Humidity Altivar EWSense Humidity

Temp & CO2 Temp & CO2
ELECTROMECHANICAL
Sensor Sensor
Coolers, Freezers,
Self-Contained Equipment & Hood Management
EcoStruxure™ for Restaurants 11
Ensuring asset protection and a cozy, welcoming ambiance for guests
EcoStruxure™ Facility Expert
INTRODUCTION
Internet Router
Q4-2019 Q4-2019
Automation
Server Smart Link

SE8000IP

RTN400 SE8000 IEM3155
SENSORS
I/O Presence/Door
Sensor
Power Tag
Energy/Electrical
ELECTROMECHANICAL
Distribution - IOT CO2, EWSense

Humidity,
Temperature
Complete mini-BMS including refrigeration,

lighting, HVAC and electrical distribution
12
nEW
Replace electromechanical
INTRODUCTION
• Installation made easier with rapid connectors and

frontal mounting
• Front panel and connections protected from water
Applications
The nEW series is the standard Eliwell solution for large production volumes. Thanks to the flexibility of the platform and the library
of available functions, nEW is the best solution for manufacturers who are looking for an innovative solution with the advantages of
electronic control and at the same time easy to install and use.
Common features
Direct load management up to 2Hp Use of factory screw connectors for quick, versatile hookup
Universal power supply switching from 100 to 240Vac 50/60Hz in a single Copy cards which can be used for quick programming
model
Model Application Notes

nEW 961 Static units 2Hp power relay for compressor piloting
nEW 971 Ventilated units 2Hp relays, 1 defrost output
nEW 974 2Hp relays, 1 configurable output 2 Hp/1.5Hp* relay, defrosting output and fans
* depending on the model
SENSORS
Our low cost parametric control replacement for any simple electro mechanical control adds visual display, reliable industry
load switching relays and more parametric options to choose from
ELECTROMECHANICAL
EWPlus Series 13
Versatile applications with energy saving features for DOE
INTRODUCTION
• Display with large digits and coloured icons, to understand operating
status easily
• Simple, intuitive menus for fast learning
• Suited for applications with hydrocarbons
• ENEC/UL Certifications (check on the device label)

Applications
The EWPlus series includes flexible, modern design controllers for plug-in refrigerated counters.
Thanks to platform versatility and a library of available functions, Eliwell is the best answer for manufacturers seeking custom solutions for
energy saving requirements and simplification of production processes.
Common features
Direct load management up to 2Hp and power supply of 230Va or 115Va
Use of removable/faston/screw connectors for quick, versatile hookup
Unicard USB for customizing even small lots
Industrial packaging 60 pieces

EWPlus 961 Static units 2 Hp power relay
EWPlus 971 Ventilated units 2Hp relays, 1 configurable output
(defrost/fans/lights/alarm/stand-by)
EWPlus 974 Ventilated units 2Hp relays, 2 configurable outputs
(defrost/fans/lights/alarm/stand-by)
• Variety of display colors

• Complete management of compressor, lights, defrost, fans and alarms
• Energy savings realized with R290, smart defrost, evaporative fan duty cycle and economy mode

• Moisture protection with front panel gasket and back cover
• Direct control of compressors up to 1 HP
• Customized OEM branding
• Factory friendly connections, programming, and barcodes
SENSORS
ELECTROMECHANICAL
14
EWPlus EO Series
High energy saving solutions
• Advanced control algorithms contribute to energy saving up to 39%* with no modification of

INTRODUCTION
counter structure needed

• Self-adaptation of the energy saving functions based on the conditions of use of the
refrigerator
• The product is compatible with the new ecological refrigerants R290, R600, in compliance
with IEC 60079-15-2005
• Optimized temperature management when switching from night to day mode
• No supplementary sensors needed thanks to the virtual door switch
• Management of a 2nd compressor on the basis of a differentiated temperature threshold and
a delay
• Advanced algorithms for defrost management on the 2nd evaporator

• Voluntary certification: ENEC/UL (check on device label)
• 4 easily selectable configurations pre-loaded in a single controller
• Internal RTC (depending on model)
Applications
The EWPlus EO series controllers are designed to combine high energy savings with maximum ease of installation and use, easily applicable
also replacing prior series controllers.
Thanks to platform versatility and a library of available functions, Eliwell can design custom solutions for energy saving requirements and
simplification of production processes.
Common features
Direct load management up to 2 Hp and power supply of 230V~ or 115V~

Integrated protection of loads against voltage fluctuations controllable by parameter
Use of removable/faston/screw connectors for quick, versatile hookup

Industrial packaging 60 pieces

EWPlus 961 EO Static units 2Hp relay, 1 analogue input, 1 digital input
EWPlus 971 EO Ventilated units 2 Hp relay, 2 configurable outputs (defrost/fans/lights/alarm/stand-by),
2 analogue inputs, 1 digital input
EWPlus 974 EO
Ventilated units 2Hp relay, 3 configurable outputs (defrost/fans/lights/alarm/stand-by)

EWPlus 978 EO Ventilated units 2Hp relay, 4 configurable outputs (defrost/fans/lights/alarm/stand-by),
EWPlus 974 EO Smart Control Ventilated units 2Hp relay, 3 configurable outputs (defrost/fans/lights/alarm/stand-by)
EWPlus 978 EO Smart Control Ventilated units 2Hp relay, 4 configurable outputs (defrost/fans/lights/alarm/stand-by),
LOW ENERGY CONSUMPTION
39% Longer-lasting components

Energy • Protection of compressor against voltage fluctuations
SENSORS
EWPlus EO savings thanks to incorporated low and high voltage detector LVD
20%* (patent in the registration process).
Energy • Advanced control algorithms for long-lasting performance
savings
Electronic controllers with no need to modify counter structure.
0%
ELECTROMECHANICAL
Electromechanical controllers
HIGH ENERGY CONSUMPTION
EWPlus EO
*energy saving certified by the independent laboratory INTERTEK
EWPlus 978 15
Solutions for double evaporator and double compressor
• Solution for combined counters, double evaporator or double
INTRODUCTION
compressor
• Compact solution for control of small mono-blocks
• Suited for applications with hydrocarbons
Applications

The EWPlus 978 series controllers are designed to combine high energy savings with maximum ease of installation and use, easily applicable
also replacing prior series controllers.
Thanks to platform versatility and a library of available functions, Eliwell can design custom solutions for energy saving requirements and
simplification of production processes.
Common features
4 configurable output relays for double compressor control and single or double defrost
Power supply 120V

EWPlus 978 Combined counters Single or double compressor
Monoblocs Single or double evaporator
Application examples
In a combined cold case, EWPlus 978 can manage the double compressor with:
- delayed compressor start/initiation
- ignition based on differentiated temperature threshold and delay
In this case, the controller can manage the set sequence or rotation between two

compressors.
It can also manage double defrosting:
- delayed
- with independent defrost end temperatures
- with common defrost time-out
EWPlus 978
SENSORS
ELECTROMECHANICAL
16
KDE-KDT-ECPlus Series User Interfaces
User interfaces for RT family
INTRODUCTION
ECPlus, KDEPlus: compatible with controllers in the RT series

•
KDT: keyboard with touch technology, compatible with controllers
•
ECPlus KDEPlus in the RT series
• KDT (horizontal): customizable for OEM solutions
KDT (horizontal) KDT
Applications
KDEPlus is a user terminal for integral display and programming of controllers for remote and plug-in refrigerated cabinets.
Each power board can be connected to a single keyboard and, if required, to an ECPlus module for remote display by means of the
special connector.
The remote ECPlus display can be used to view displayed date from up to 325’ away, differentiating it from the data displayed on
KDEPlus terminals.
The KDT keyboards, made using backlit screen-printed plexiglass, can be used to carry out all procedures currently offered by membrane
and standard 32x74 keyboards, but with a perfectly smooth and easy to clean surface, combined with a modern look and the natural
feeling of touch-sensitive keys with light and sound feedback. The special construction of the keyboards, with its glued-on installation
option, offers reduced installation times, precise positioning and a protection rating of IP65. The simplicity of the KDT keyboards stems
from Eliwell’s experience in studying solutions for design and installation simplification.
Technical data Horizontal KDT Vertical KDT KDEPlus ECPlus

Casing: Polymethylmethacrylate Polymethylmethacrylate PC+ABS UL94 V-0 resin Body and window in
(PMMA) front panel (PMMA) front panel casing, polycarbonate window, polycarbonate
thermoplastic resin keys
front panel 7.1” x 1.6”, depth front panel 3.4” x 5.3”, front panel 2.9” x 1.3”, depth front panel 1.9” x 1.1”,
Dimensions:
0.06” depth 0.06” 1.2” depth 0.6”
panel mounting, can be panel mounting, can be
panel-mounting, with 2.8” panel mounting with
set for a distance of up to set for a distance of up
Installation: x 1.1” (+0.2/‑0.1”) drilling 1.8” x 1” (+0.2/‑0.1”)
325’, with 5.9” x 1.2” drilling to 325’, with 2.6” x 4.7”
template drilling template
template drilling template
3 digits+sign, 8 coloured 3 digits+sign, 8
icons coloured icons colours
with decimal point ° with decimal point °
Display: colours can selected from: can selected from:
3 digits + sign 3 digits + sign
amber/red/blue/white amber/red/blue/white
6 capacitive touch keys 6 capacitive touch keys
Display range: see power board see power board

• screw terminals for
• screw terminals for low
low voltage connection
voltage connection
Connections: • JST for KDWPlus or
• JST for ECPlus display
KDEPlus user terminal
connection
connection
Power supply: from power board from power board
Power consumption: - -
Ambient operating
23...130°F 23...130°F
temperature:
Ambient storage
-22...185°F -22...185°F
temperature:
Ambient operation and 10...90% RH
10...90% RH (non‑condensing)
SENSORS
storage humidity: (non‑condensing)
Adaptive Defrost
Defrost cycle starts if one of the following conditions happens:
• The cumulative compressor operation time (dit parameter) has elapsed since the last defrost (with dit≠0);
• compressor has been switched on continuously for dtt time;
• The evaporator temperature drops below the dSS threshold (without delay);
• The evaporator temperature falls below the dynamic threshold, with active compressor
ELECTROMECHANICAL
The dynamic threshold is determined in the following way:

• The temperature measured by the evaporator probe is stored at the end of the first compressor state cycle after a defrost
cycle. At the power-on is stored the temperature measured by the evaporator probe at the end of the first compressor state cycle;
• An offset is substract, dOS parameter
RTN400 Series 17
Connectable controllers for self contained equipments
• Connectible through Modbus
INTRODUCTION
• Single or dual compressor control
• Advanced resistance defrost
• Evaporator fan control in Night&Day mode
• Fixed duty-cycle frame heater control
• Pre-programmed, easy-to-select configurations.
• Adaptive control for variable speed compressors
Applications
RTN400 are compact controllers for plug-in and remote cabinets with thermostatic valve control.

RTN400 controllers are compact and stand out for the high-performance and high flexibility they offer through energy-saving algorithms and
the direct control of compressor and fans.
RTN400 SM provides energy savings in supermarkets and commercial food distribution and storage applications; it is suitable for the control
of EMBRACO VNEU and SECOP CCD variable speed compressors, obtaining maximum performance through a control algorithm with self-
learning of operating parameters. It also combines optimised defrost cycle management, dewpoint-based heating and anti-condensation
element modulation and cold room set point modulation, with automatic identification of open/closed operational time bands.
RTN400 controllers can be interfaced with KDEPlus and KDWPlus keyboards and with the ECPlus display module. It’s important to note here
that this control can be used with no display as well, a trend starting to take hold by many OEM’s.
Features
Power boards in compact bare box (121x92mm)
5 temperature probes and 1 configurable digital input

RTN400 Supermarket counters Bare board with fast power connections, faston type
Supermarket counters with variable speed com-

RTN400 SM Bare board with fast power connections, faston type
pressor
KP00Q1S0 of the Modbus
RS485 Plug-in module Modbus serial adaptor to EcoStruxure™
adaptor
RS485
Application examples
In a plug-in counter, RTN400 is used to control compressor, lights and fans

connected to a monitoring system via RS-485 network (the optional board is
needed for RS-485 connectivity).
RTN400
Plug-in R290 tank with variable speed compressor

RTN 400 SM can control all aspects of the application, including compressor,
SENSORS
fans, lights and defrosting.

The innovative self-learning algorithm for control of variable speed compressors
significantly reduces the time required for commissioning, ensuring maximum
energy efficiency in all conditions and a longer motor life.
The advantages of this type of application are:
• Smaller compressor
ELECTROMECHANICAL
• Reduced refrigerant charge

• Continuous control of cooling capacity
• Fewer compressor start-ups and consequently longer compressor life
RTN400 SM
18
Selection guide for self-contained controllers
Characteristics
INTRODUCTION
Applications
Energy Efficiency*
Outputs Inputs
(Power + Inputs)
User Interface
Connections
NTC Probes
Compressor
Medium Temp
@ 120Vac
Dispenser /
Low Temp
Warming
Relays3,4
Display
Beer Tap
Power
Color
Dual
DI
1 Output
√ √ NN 1 - 16FLA (1HP) 1 1 100-240Vac red Spade + RAST
amber, red,
√ √ √2 NN 1 - 16FLA (1HP) 1 1 120 or 240Vac Spade + Plug
blue7
amber, red,
√ NNN 1 - 16FLA (1HP) 1 1 120 or 240Vac Screw Terminal
blue7
2 Outputs
1 -16FLA
√ √ √1 NN 1 2 100-240Vac red Spade + RAST
2 - 3A (2FLA)
1 - 16FLA (1HP)
√ √ √1 NN 1 2 100-240Vac red Spade + RAST
2 - 8A (4FLA)
1 -16FLA amber, red,

√ √ NN 1 2 120 or 240Vac Spade + Plug
2 - 5A (2 FLA) blue7
1 - 16FLA (1HP) amber, red,

√ √ NN 1 2 120 or 240Vac Spade + Plug
2 - 8A (4FLA) blue7
3 Outputs
1 - 16FLA (1HP)
√ √ √1 NN 2 - 8A (4FLA) 1 2 100-240Vac red Spade + RAST
3 - 5A(2FLA)
1 - 16FLA (1HP)
amber, red,
√ √ √ NN 2 - 8A (4FLA) 1 2 120 or 240Vac Spade + Plug
blue7
3 - 5A (2FLA)
1 - 16FLA (1HP)
amber, red,
√ √ √ NNN 2 - 8A (4FLA) 1+16 2+16 120 or 240Vac Spade + Plug
blue7
3 - 5A (2FLA)
1 - 16FLA (1HP)
amber, red,
√ √ NNNN 2 - 8A (4FLA) 2 2 120 or 240Vac Screw Terminal
blue7
3 - 5A (2FLA)
4 Outputs
1 - 10FLA
2 - 8A (4FLA) amber, red, Phoenix
√ √ √ NN 1+16 2+16 120 or 240Vac
3 - 5A (2FLA) blue7 Plug-In
4 - 5A (2FLA)
SENSORS
5 Outputs
1 - 16FLA (1HP)
2 - 8FLA (1/2HP)
amber, red, Spade +
√ √ √ NNN 3 - 8A (4FLA) 1+56 56 100-240Vac
blue, white7 Screw Terminal
4 - 8A (4FLA)
5 - SSR5
ELECTROMECHANICAL
NN Evap. fan cycling, reduced setpoint mode,

smart defrost
NNN Advanced algorithms, dmande defrost,

modulating defrost
NNNN Advanced self-learning algorithms

Selection guide for self-contained controllers 19
INTRODUCTION
Options / Acces.11
Standard Part Number
Models13
*(Blue Display, 120 VAC)
Front Panel
Plexiglass
Drip Guard
Rear Cover
Options
Gasket
Cover
Color
Bezel

Y Y Incl12 red nEW 961 NW17DIHMCEF80
Y Y Y Gray, Silver EW Plus 961 EW17DIHMB9C80
Y Y Y Gray, Silver EW Plus 961 EO Contact Sales
Y Y Incl12 red nEW 971 NW22DIHMBGF80
Y Y Incl12 red nEW 971-SPDT NW29DIHMBGF80

Y Y Y Gray, Silver EW Plus 971 EW22DIHMC9C80*
Y Y Y Gray, Silver EW Plus 971-SPDT EW29DIHMC9C80*
Y Y Incl12 red nEW 974 NW2EDIHMBGF80
Y Y Y Gray, Silver EW Plus 974 EWF4DLHMC9M99*

Y Y Y Gray, Silver EW Plus 974 EO EW2EDIGMC9C80*
Y Y Y Gray, Silver EW Plus 974 EO Smart Contact Sales
Y Y Y Gray, Silver EW Plus 978 Contact Sales SENSORS
RTN (Control Module) Contact Sales

Graphics
Custom
Cusomizable
Contact Sales
KDT (User Interface Module)
KDE (Std. User Interface) KDE400E006080

ELECTROMECHANICAL
1
Display values up to 199°F 7
Standard option is blue, other colors available as 9
Requires gasket as a separate item, responsibilty of
2
Display values up to 230°F custom part number customer to ensure IP rating in the application
3
Suitable for hydrocabons; IEC 60335-2-89 for GWT 8
When remote display is used, external 10
Factory purposes only
& flammable gas; use of relay with wash tight variants communications are not available; contact sales for 11
All products can be custom branded and factory
(bubble test 33.5 IEC 60079-15) remote display and buzzer options. All models have pre-programmed
4
Assignable relays on all models factory communications interface and some have 12
Gasket is already integrated with the plastics
5
Open Collector output to drive external SSR external Modbus capabilities; contact sales. 13
cUR and NSF certified
6
Input used as either DI or probe
20
EWSense
Wireless system for Temperature, humidity and Co2 monitoring
EWSense Gate
INTRODUCTION
EWSense Temp
CO2 Sensor
Humidity & CO2 Sensor
Temperature Sensor EWSense Temp
Humidity &
Temperature Sensor
EWSense Temp - wireless temperature sensor EWSense Repeater - wireless signal repeater module
SENSORS
• Food Zone installation material: NSF • Power Supply: 24V...240Vac/dc

• Metering range: -22°F to 131°F, Transmit interval: • Max transmit distance: 300’ (line of sight)
2 minutes, 2 years life, battery powered sensor • Typical transmit distance: 30’
• Max transmit distance: 300’ (line of sight) • No configuration needed
• Mounting / Dimension: Adhesive / 1.58” x 1.54” x
0.65” Humidity Sensor
ELECTROMECHANICAL
• Mounting options: Plastic tie, Velcro, Metal plate • Wireless CO2 sensor with room temperature
with screw and humidity
• Wireless sensor with room temperature & humidity
EWSense 21
Wireless system for temperature, humidity & CO2 monitoring
Codes Descr. Notes
INTRODUCTION
ESG0010700 EWSense Gate ZBRN12 ZigBee receiver with RS-485
Modbus/RTU serial port
ESARJC200 EWSense 2 x RJ45 serial Kit with 2 cables with RJ45 connector
cable 3.3’ for RS-485 serial connection
ESST1010800 EWSense Temp ZigBee Green Power wireless
temperature sensor
ESR0012700 EWSense Repeater
16’ Cable
ZBRA12
ESST010B0400 4 x EWSense Temp Kit of 4 EWSense Temp sensors
ESAMPL000 EWSense Metal Plate Kit for panel fixing with metal plates for

KIT x4 4 EWSense Temp
SED-TRH-G-5045 Temperature and Humidity Sensor
SED-CO2-G-5045 CO-2, Temperature and Humidity Sensor
Applications
EWSense is a wireless system for measuring the temperature of food storage and processing equipment and rooms. The wireless and battery-
operated sensors make the system extremely easy to install; they can also be replaced, avoiding the need to periodically re-calibrate the system.
The EWSense Temp sensor is made from plastic, suited to food-grade environments with protection rating IP65 and measures the ambient
temperature where it is installed between -22°F and 131°F for over 2 years, thanks to the integrated battery and the ZigBee 3.0 Green Power
wireless communication.
The EWSense Gate receiver manages up to 60 sensors positioned in a radius of 300 feet (line of sight), indicatively 33 feet in standard installations.
The RS-485 Modbus/RTU line allows monitoring systems to acquire temperature date, signal level and battery level, for full system diagnostics.

Common features
Low-consumption ZigBee Green Power wireless communication
Up to 60 EWSense Temp sensors for each EWSense Gate receiver
Technical data EWSense Gate EWSense Temp EWSense Repeater

Dimensions (in.) 4.37 x 3.89 x 2.74” (LxHxD) 1.57 x 1.54 x 0.65” (LxHxD) 3.6 x 3.6 x 2.5
Installation on DIN Omega bar support Gluing on flat surface with double sided Wall
tape (supplied)
Power supply 24V…240Vac/dc Integrated battery, not replaceable. 24V…240Vac/dc
Duration more than 2 years of operation.
Connectivity RS-485 for connection to TelevisSystem ZigBee 3.0 Green Power Standard IEEE ZigBee 3.0 Green Power Standard
monitoring and systems based on ModBus 802.15.4 transmitter IEEE 802.15.4 transmitter

protocol Frequency: 2,405 GHz Frequency: 2,405 GHz
ZigBee 3.0 receiver Distance: 300’ (in free field) Distance: 300’ (in free field)
Protection rating --- IP 65 IP 65
Measurement range --- -22°F … 131°F -----
Measurement accuracy --- ±0.6°F -----
Wiring diagrams Humidity Sensor

Dimensions 3.26” x 2.85” x 0.72”
Operating temperature 32°F to 122°F
EWSense Temp EWSense metal plate CO² accuracy at NTP ±60ppm +3% of reading
(400-2,000ppm range)
mm - in. 2x Ø 3.2 - 0.13
mm - in.
CO² measurement pressure 0.13% of reading per mm Hg (normar at-
dependency mospheric conditions of ~100Kpa
SENSORS
CO² resolution at NTP ±20ppm at 800ppm

39.1 - 1.54
16,35 - 0.65
4.15 - 0.17
Transmission protocol Zigbee 3.0 Green Power

49.7 - 1.96
(encrypted, bi-directional
Transmission range Up to 328’ free field
40.1 - 1.57
66’ to 98’ indoor
Protection IP20
ELECTROMECHANICAL
16,35 - 0.65
30.3 - 1.19
42,7 - 1.68
40.1 - 1.57
22
Schneider Electric EcoStruxure™ Machine Advisor
Digital service platform for machine builders
INTRODUCTION
EcoStruxure™ Machine Advisor is a digital, cloud-based

services platform for remote accessing operating machines. It
enables machine builders to provide new services to machine
operators for each installed machine in any production site
worldwide. The machine builder can now support the machine
operator by creating the optimum framework conditions for
perfect and reliable machine operation.
Building on its deep expertise in the OEMs segment, Schneider Electric’s EcoStruxure™
Machine Advisor offers new levels of efficiencies and growth by turning data into key insights
for machine builders. It provides a fully connected framework for reliable machine operation
through three key functionalities:
• Track: OEMs can visualize the location of all their machines, with real-time access to
documentation and history, such as bill of materials, manuals, maintenance logs and task
management schedules.
• Monitor: The cloud-based software allows OEMs to collect and visualize machine data
in real time, giving a comprehensive analysis of Overall Equipment Effectiveness (OEE),
SENSORS
widgets for performance against key KPIs and other trends, and dashboards to monitor
machine availability and output quality.
• Fix: A service enabled by a mobile app to facilitate maintenance and operations with
contextual information, the help of step-by-step procedures and remote expertise by
leveraging augmented reality. Furthermore, Fix provides remote access to the engineering
software in the cloud enabling service technicians to use “Software-as-a-Service” to always
ELECTROMECHANICAL
have the right version and libraries by hand.

Schneider Electric EcoStruxure™ Facility Expert 23
Optimizing
Optimizing the operational
the operational cost for chain cost of yourmanagers
maintenance Stores
INTRODUCTION
EcoStruxureTM Facility Expert
EcoStruxure™ Facility Expert provides an integrated,
Provides an integrated, IoT-based platform, fully adapted to retail
IoT-based platform, fully adapted to retail chains projects that
chains projects that optimizes business continuity, improves
optimizes business continuity, improves operational efficiency, energy
operational efficiency, energy consumption and comfort of
consumption and comfort of customers,
customers, at once.
at once.
Whether used on PC, smartphone, tablet, online or offline,
Whether used on PC,
EcoStruxure smartphone,
Facility tablet,
Expert offers online or offline,
a collaborative technology that
EcoStruxure™ Facility Expert offers a collaborative technology
involvingthat

remains you connected to equipment and stores very
remains you connected to equipment and stores involving very simple
simple information sharing, remote monitoring and control across
information sharing, remote monitoring and control across your
your portfolio that helps stores owners and their contractors to:
portfolio that helps stores owners and their contractors to:
Optimize
Reduceoperations
business interruption losses
• Reduce over-spend thanks to maintenance plan, task manager and
task reminders
Wireless to ensure
technology and organize
delivers enhanced maintenance
protection on your key
• Speed upwith
assets troubleshooting: accesstoequipment
minimal interruption business. log history and doc
repository, prepare
• Monitor intervention
and localize all yourand get on-field
equipment support
(cold room, from
chillers,
rooftops,
colleagues if needed
built-in fridges)
• Automate
• Beyour manual
in casereadings (positive/negative temperatures)

alerted of equipment breakdown or malfunction
and generate reports in a single click to ensure traceability,
• Diagnose remotely and repair faster with alarms details
regulations compliance and reduce administrative tasks
Optimize operations
Gain control on energy consumption
• Reduce
• Monitor energyover-spend thanks
24/7 to point outto equipment,
maintenance plan,
zonetask
andmanager
usage and
task reminders to ensure and organize preventative maintenance Monitor
Monitorequipment:
equipment:
deviations and identify contributors to peak consumption
• Settle• targets
Speed and parameters to
up troubleshooting: avoidequipment
access utility penalties and
log history and bedoc
electrical,
electrical,refrigeration,
refrigeration,HVAC
HVAC
alerted inrepository,
case of prepare intervention and get on-field support from
overconsumption
• Evaluatecolleagues if needed
performance: benchmark all your sites, compare to
local •scales, meetyour
Automate energy standards
manual readings (ISO 50001, LEEDS,
(positive/negative NABERS),
temperatures)
monthly and generate
score cards reports in a single click to ensure traceability,

regulations compliance and reduce administrative tasks
• Costs monitoring
Gain control on energy consumption
Provide comfortable environment for customers
• Monitor energy 24/7 to point out equipment, zone and usage
• Remote control of connected thermostat: On/Off, setpoints, mode
deviations and identify contributors to peak consumption
selection, operation sequence, compressor auxiliary interlock
• Control
• and
Settlemodify
targets your schedulestofrom
and parameters avoidanywhere, anytime
utility penalties and be
• Monitor alerted
comfort in case of overconsumption
(temperatures, humidity, CO2 level ) of your
sales •areas
Costs monitoring Monitorenergy
Monitor energyconsumption
consumption
• Evaluate performance: benchmark all your sites, compare to local
Reduce business
scales, meetinterruption
energy standardslosses
(ISO 50001, LEEDS, NABERS),
Wireless technology delivers
monthly score cards enhanced protection on your key assets
with minimal interruption to business.
SENSORS
Provide comfortable environment for customers

• Monitor and localize
• Monitor comfortall(temperatures,
your equipment (cold
humidity, room,
CO2 levelchillers,
) of your
rooftops,sales
built-in
areasfridges)
• Be alerted in case
• Control and of equipment
modify breakdown
your schedules or malfunction
from anywhere, anytime
• Diagnose remotely
• Remote and
control of repair faster
connected with alarms
thermostat: details
On/Off, setpoints, mode
Monitor comfort
comfort
ELECTROMECHANICAL
selection, operation sequence, compressor auxiliary interlock

24
Eliwell™ TelevisAir
RTN400 Wireless tool for Service team
INTRODUCTION
Model Application
ADBT4200000000 DONGLE BTLE 4.2 BASIC AIR
ADBT4200001000 DONGLE BTLE 4.2 DATALOG AIR
TelevisAir is the wireless service tool for the RTN

controller installed on self-contained equipment’s such as:•
• Bottle cooler
• Drink dispenser
• Ice cream freezer
• Display cabinet
It is based on the following pillars:

• BTLE (Bluetooth Low Energy) Dongle
• Eliwell AIR APP
• TelevisAir Cloud
TelevisAir
Cloud Service
END USER
SERVICE
BTLE Dongle Basic

The BTLE (Bluetooth Low Energy) Dongle is an accessory to be plugged into the TTL port of
the Eliwell RTN400 controller to implement Bluetooth communication
BTLE Dongle Datalog
BTLE Dongle version equipped with a local memory storage
Eliwell AIR APP
Available for Android and iOS operating systems, offers the following features:
• Smart local interface with the controller
SENSORS
• Verify the status of the controller and its operating variables

• Operate the controller functions and parameters from the smart device
• Download and upload the parameters through the smart device
• Download the data stored in the BTLE Dongle Datalog to the smart device
• Synchronize with TelevisAir CLOUD the GPS location and the data stored in the BTLE Dongle Datalog
TelevisAir CLOUD
CLOUD portal providing, upon service activation:
ELECTROMECHANICAL
• Display the location and general status of the cooler network

• Access the individual cooler data and trends
• Activate threshold alerting messaging for each operating variable of the cooler
TM172P Datalogger Application 25
Thru Wifi or BMS in a store/restaurant by service team
INTRODUCTION
TM172PGD18R Datalogger See all communication
capabilities hereunder
• Monitor the status of the coolers, adjust

Archive data locally (SD card /USB ) HACPP
• Local access with phone/ tablet to web

server thru Wifi
• Embedded connection to building
management system

Embedded
No. of I/Os Input Channels Output Channels Display References
Communications Ports
6 Digital Outputs
2 Digital Inputs 1 SPDT Relay 1A

2 SPST 3A with the same
2 High Speed Counters common 1 Ethernet
Dry Contact 1 SPST 3A 1 Micro SD
SENSORS
TM172PBG18R
2 SPST 3A with the independant 1 CAN expansion bus Remote Display (optional)
8 Analog Inputs common 2 RS 485
18 TM172PDG 18R
(configurable by pair) Optional 2 SSR with indepen- 1 USB (type A) Built-in Display
8 NTC or PT1000, dent common for TM172PDG18S 1 USB Mini-B 128x64 LCD with backlight
TM172PDG18S
or PTC, or 0-20mA. only 1 Communication Port
or 4-10 mA, or hOhm, 1 uSD Card Slot
or daOhm, 2 Analog Outputs
or Digital Input
ELECTROMECHANICAL
2.0-10V, or 4-20mA,
or PWM (2kH, 24V)
26
Innovative Solutions for Supermarkets
Optimize your total cost of operations
INTRODUCTION
Industry Challenges
• ENERGY COSTS: With increasing energy costs, it is paramount to improve
energy efficiencies of refrigeration equipment running 24/7.
• GOVERNMENT REGULATIONS: Increasing regulatory demands with DOE 2017, EPA,

Energy Star and California Title 24 on efficiencies, refrigerants, and insulating materials.
• REFRIGERANT REQUIREMENTS: With the EPA ban of common refrigerants and the need
to improve efficiency, new refrigerants such as R290 and CO2 are becoming more prevalent.
• TOTAL COST OF OWNERSHIP: With increasing complexity and format evolution in

supermarkets, simplicity and ease of maintenance enables quicker ROI
Management
& monitoring
TelevisGo
Enterprise BMS
Centralized energy
management & maintenance
EcoStruxure™ for Building Operation
Compressor racks
EWCM 400 PRO EWCM 9000 PRO-HF Altivar
Cold Energy Wireless

rooms Cabinets metering monitoring
M172 Cold Box Application RTN 400 Power Meter EWSense
SENSORS
ELECTROMECHANICAL
Compressor Rack Managers Product Range 27
Scalable from simple condensing unit to CO2 transcritical Racks
EWCM 9000 PRO-HF /CO2T

• CO2 transcritical booster (2 circuits)
INTRODUCTION
• CO2 transcritical PC (3 circuits)
• Up to 8 + 8 + 4 compressor
CO2 Transcritical racks booster • Inverter modulating compressors
& parallel compression • Modulating / steps gas cooler fans
• HP & FG valve control
• 2x heat recovery including pumps
• Oil management
• Modbus/RTU, Modbus/TCP, CAN connectivity
• Programmable application baseline extendable with
Web server and Bacnet

Medium to large compressor racks
HFC / HFO refrigerants EWCM 9000 PRO-HF / HFC-HFO
• Programmable application baseline
• Up to 2 circuits
• Up to 8 + 8 compressors
• Inverter modulating compressors
• Modulating / steps condenser fans
Small racks inverter & digital • Common condensation option
scrolltype compressors, • Cascade system (stepper valve)
CRii type compressors • Floating HP / LP
• Secondary fluid pump management
• Full diagnostic

• Modbus/RTU, Modbus/TCP, CAN connectivity
• Web server - Bacnet
Features
EWCM 400P PRO /STD

EWCM 400D PRO /STD
• Single circuit
• Control on pressure
• Up to 4 compressors w/ up to 4 steps
• Digital Scroll / Inverter modulation
Small racks inverter & digital scroll • Floating HP
type compressors

EWCM 436D PRO /CRii
• Single circuit
• Up to 4 compressors
• CRii modulation – up to 3 heads
• Floating HP
Title 24 Condensing Unit TM172P

• Single Compressor with up to two unloaders
• Floating Head Pressure Control
• Modulating Evaporator/Condenser Fans
• Regulation
SENSORS
• Embedded web server•
Condensing units T
TM171O
• Programmable application baseline
• Single circuit
• Modulating fans
ELECTROMECHANICAL
• Floating HP
28
28 Architecture of Large Store
Refrigeration control and remote maintenance
INTRODUCTION
EcoStruxure™ Eliwell™ TelevisGo

Augmented Web Interaction
Operator Advisor
Internet Router
IP
TelevisGo
Web Interaction TelevisGo
EWSense Gate
TM172 TM172 TM172

RTN400
EWCM 9000 PRO-HF
Altivar Drive SFlex Drive Altivar Drive XVD RTN400 Wireless

monitoring
SENSORS
Compressor Remote Condensing Cold Boxes Plug-in Plug-in

Racks Condensers Units Controllers Temperature
Monitoring
ELECTROMECHANICAL
Refrigeration Control and Remote Maintenance

Architecture of Large Store 29
Complete building and energy management
INTRODUCTION
EcoStruxure™
Building Operation

Internet Router
IP
MPM SPC Web

Automation Automation
Server Server
Pelco Wireless
Bacnet IP Server
Multimeter
MP-C SE8000 Smartcard
SE8000

MP-V
Inverter NSX
TM172
SENSORS
HVAC & Electrical Wireless Security

Lighting Distribution & Sensors Intrsion
Metering Video
ELECTROMECHANICAL
Electrical Distribution, Air Conditioning, Security

30
TM171O Condensing Unit Application
Improve efficiency & allow connectivity
INTRODUCTION

TM171OFM22R Condensing Unit With Condensing Unit Application
Multiple parameter configuration levels

Refrigerant types, sensor configuration, pressure or temperature, units of measure (°F/PSI, °C/bar)
Compressor Management
Compressor type ,digital control of 1 compressor with or without unloader
algorithms: cut-in / cut-out, PID with VSD, low pressure or temperature control , offsets
Increase compressor life, bump start, min & max run times, fault operations, pump down time
Fans Management
Control of up to 2 condenser fans based on HP, evap. fan control different controls strategies
Defrost
Type: interval time, time of day, demand defrost, defrost delay / cycle initiation, display information,
defrost heater duty cycle
Historical data
Compressor operations, fan operations, alarms
Alarm codes & fault operations
Compressor # of fault retries, min/max case temperature, min/max pressures independent of external safety controls
Field diagnostics mode, RTU Modbus open protocol
Embedded
6 Digital Inputs
6 Digital Outputs
5 Configurable Analog
Inputs 3 SPST 3A with the same common
1 LAN Expansion Bus
(configurable by pair) 2 SPST (2A, 230Vac) with the independent
Built-in Display
22 3 NTC or Digital Input, common TM171OFM22R
1 RS 485
or 0-20mA. 1 Open Collector
1 Lan Expansion Bus
or 4-10 mA, or 0-10V, 5 Analog Outputs
or 0-5V, or 0-1V or 2 Open Collector for 12V PWM/PPM
Digital Inputs 3.0-10V
Wiring diagrams
SENSORS
ELECTROMECHANICAL
EWCM 400D PRO 31
Parametric compact controllers for compressor racks
Codes Descr. Notes
INTRODUCTION
EWCM 436D PRO CC /A-CRII KIT CRii compressor – 4 DIN –
EPDT1PCR24U0A
W/CABLES 2 embedded SSR
EWCM 436D PRO CC /A-STD KIT Digital scroll/inverter – 4 DIN –
EPDT1PSTD4U0A
W/CABLES 2 embedded SSR
EWCM 455D PRO CC /A-STD KIT Digital scroll/inverter – 4 DIN –
EPD01PSTD4U0A
W/CABLES external SSR
EWCM 455P PRO CC /A-STD KIT Digital scroll/inverter – flush
EPE01PSTD4U0A
W/CABLES mount – external SSR
4 DIN expansionModule for
EP55000004U0A EXP 455D PRO CC KIT W/CABLES
digital scroll/inverter

Applications
The new series of controllers for EWCM 400D PRO compressor racks are designed to manage small central
cooling units with capacity modulation plus two-step or inverter modulation for condensation fans. The range of
models manages modulation for CRii, Digital Scroll and Inverter compressors andis available in both flush mount
and DIN rail mount The floating condensation management according to the external temperature conditions
completes the characteristics offering energy saving features.
Common features
Control of compressor racks up to 4 compressors and condenser fans Energy saving with floating condensation
Modulation of the capacity for CRiiseries compressors up to 3 valves RS-485 serial and Modbus RTU open supervision protocol

Two-step or inverter fan control
Technical data EWCM 400D PRO EWCM 455D PRO EWCM 455P PRO EXP 455D PRO
I/O Description
Analogue Inputs 3 configurable analogical, clean contact digital, NTC inputs
2 voltage/current analogue configurable inputs, clean contact digital inputs
Digital Inputs 6 clean contact digital inputs
TC1, TC2: TRIAC 3 A - 230 Vac output TRIAC
high voltage
1 PWM analogue output (2) low voltage
2 PWM analogue output (2) low voltage (SELV)
(SELV)
Analogue outputs 2 analogue outputs 0 ... 10 V, low voltage (SELV)
2 analogue outputs 0 ... 10 V, low voltage
1 analogue output 0 ... 10 V / 4 ... 20 mA / 0 ... 20 mA, low voltage (SELV)

(SELV)
1 analogue output 0 ... 10 V / 4 ... 20 mA / 0
... 20 mA, low voltage (SELV)
3 relay outputs 2 A - 230 Vac 5 relay outputs 2 A -230 Vac
Digital outputs
2 low voltage open collector outputs (SELV) 1 low voltage open collector outputs (SELV)
Connectivity TTL programming port for MFK, DMI, UNICARD —
Clock Present —
Power consumption 12 ... 24V~ not insulated
Wiring diagrams
SENSORS
SKP 10
– + G 5 6 7 8 9 10 11 12
LAN
LAN
RS 485
RD
RD
BU
BU
BK
BK
TTL
N DO3 DO2 DO1 TC2 TC1
ELECTROMECHANICAL
RD
BU
BK
4 G 3 5
DI1 DI2 DI3 DI4 DI5 DI6 DO4 AO1 c 12 V Supply
LAN AO AI1 AI2 AI3 AI4 AI5 GND GND DO5 c 5 V Supply
32
TM172 Condensing Unit Application “Title 24”
Compliant with California Title 24
INTRODUCTION

TM172P... Condensing Unit With Condensing Unit Application
Enhanced Control Methodology to meet the requirement of

California Building Energy Efficiency Standards Title 24:
• Floating Head Pressure Control
Continuously variable speed condenser fans serving a common condenser high side in unison with reset
table condensing temperature in response to ambient dry-bulb temperature.
• New Energy Saving options for parameterized Evaporator Fan control
Features:
• Complete Schneider Electric solution for both hardware and software
• Implemented control methods for multi-evaporator applications.

• Embedded web server and Remote Display for easy accessibility.
• Multiple network solutions: Modbus/Ethernet/BACnet/LONworks
• Superheat regulation for evaporators
Multiple configuration levels
Refrigerant types, Sensor configuration, Pressure or temperature, Units of measure (°F/PSI, °C/bar)
Condenser and Evaporator Fans Management
Support ECM fan motor controls, VSD controls
Defrost
Activation type: interval time, time of day, demand defrost, Defrost delay / cycle initiation, Display information,
Defrost type: Air defrost, Electrical heater
Historical data
Fan and Compressor operations, Alarms, Historical temperature/pressure readings.
Min/max case temperature, Min/max pressures independent of external safety controls
Compressor
Compressor with up to 2 unloaders, Multiple Refrigerant Types supported
SENSORS
ELECTROMECHANICAL
TM172 for Case- Cold Box Control 33
Optimal control and asset management
INTRODUCTION
TM172PDG18R
TM172PDG28R Evaporator IO Expandable configuration for
Cold Box Control multiple evaporator application
TM172PDG42R

Main Features:
• Expandable I O configuration for multi-evaporator applications.
• Remote Display for easy a ccessibility.
• Multiple network solutions: Modbus/Ethernet/BACnet/Lonworks
• Super heat regulation
Multiple configuration levels
Refrigerant types, Sensor configuration, Pre ssure or te mperature, Units of measure (F/PSI, C/bar)
Fans Management
Support ECM fan motor controls, VSD controls
Defrost

Activation type : interval time, time of day, demand defrost, Defrost delay / cycle initiation,
Display information,
Defrost type : Freewheel/Air defrost, Electrical heater
Historical data
Fan operations, Alarms, Historical te mperature/pressure readings.
Mi n/max case temperature , Min/max pressures independent of external safety controls
Embedded
6 Digital Outputs
2 Digital Inputs
SENSORS
1 SPDT Relay 1A
2 High Speed Counters
2 SPST 3A with the same common 1 Ethernet
Dry Contact
1 SPST 3A 1 Micro SD
Remote Display (optional) TM172PBG18R
2 SPST 3A with the independent common 1 CAN expansion bus
8 Configurable Inputs
Optional 2 SSR with independent 2 RS 485
18 (configurable by pair) Built-in Display TM172PDG18R
common 1 USB (type A)
8 NTC or PT1000, 128-64 LCD with backlight
for TM172PDG18S only 1 USB Mini-B
ELECTROMECHANICAL
or PTC, or 0-20mA TM172PDG18S

1 Communication Port
or 4-10 mA, or hOhm,
2 Analog Outputs 1 uSD Card Slot
or daOhm
or Digital Inputs
2.0-10V, or 4-20mA
or PWM (2kH, 24V)
34
EWCM 9000 PRO-HF HFC-HFO
Programmable controller with single and double circuit compressor rack
Code Descr. Notes

INTRODUCTION
With integrated display and

EPAS1FCHA5U0 EWCM 9000 PRO - HF 42D SSR CC /HFC-HFO
SSR output
EPK0100000U0 EVK PRO DISPLAY /GR CC Remote Display
TM172E28RCC1 M172 Opt. & Perf. expansion 28 I/Os CC
TM171EP14RCC1 M171 Perf. expansion 14 I/Os CC
Applications
EWCM 9000 PRO - HF HFC – HFO is a programmable controller with an application baseline suitable to control traditional
compressor racks with single and double circuit; inverter and digital scroll compressor modulation; staged or inverter
modulated condenser fans. The library includes defrost management and efficiencyalgorithms such as Floating condensation
management. The basic library provided by Eliwell allows for the development times to be reduced thanks also to the
debugging systems, simulation and diagnostics, even remotely, that can be found in the SoMachine HVAC software suite.
Furthermore, Eliwell has a team specialised in supporting the developers and a network of partners capable of assisting
clients in devising customised solutions.
Features
Controller freely programmable with SoMachine HVAC Expandable up to 12 modules and 2 remote keyboards
Basic library for single and double circuit compressor rack Modbus/RTU, Modbus/TCP, CAN, Web server/http connectivity
Diagnostic and simulation tools
Technical data EWCM 9000 PRO-HF / HFC-HFO Expansion 14 I/O Expansion 28 I/O EVK PRO
Dimensions 5.7” x 4.3” front panel, depth 2.4” 2.8” x 3.4” front panel, 2.8” x 3.4” front panel, 7.5” x 3.8” front
depth 2.4” depth 2.4” panel, depth
0.4”, total depth
1.4”
Power supply 24 Vac / 20...38 Vdc 24 Vac / 24 Vdc 24 Vac / 20-38 Vdc 24 Vac / 24 Vdc
Power consumption 35 VA / 15 W 16 VA / 7 W 24 VA / 15 W 5W
Analogue inputs 12 configurable inputs: 4 configurable inputs 16 configurable inputs -
NTC -40..275°F NTC -40..275°F NTC -40..275°F
DI DI DI
NTC -58..230°F NTC -58..230°F NTC -58..230°F
PT1000 -325..1560°F PT1000 -325..1560°F PT1000 -325..1560°F
PTC -67..300°F PTC -67..300°F PTC -67..300°F
0-20 mA 4-20 mA 0-20 mA

4-20 mA 0-10 V 0-10 V
0-10 V 0-5 V 0-5 V
0-5 V 0-5 V ratiometric
0-5 V ratiometric
Digital inputs 10 SELV +24 V ac/dc opto isolator inputs 4 safety extra low voltage 4 SELV + 24V ac/dc opto -
2 rapid opto isolator inputs, up to 2 kHz SELV insulator inputs up to 2kHz
Analogue outputs 4 outputs 0-10 V 2 x 0-10V 2 configurable outputs -
2 configurable outputs 0-10 V
0-10 V 4-20 mA
4-20 mA Open Collector
Open Collector
Digital outputs 8 3 A SPST +250 V a.c. relays 3 3 A SPST +250 V a.c. relays 10 3 A SPST +250 V a.c. relays -
2 1 A SPDT +250 V a.c. relays 1 1 A SPDT +250 V a.c. relays
2 SSR x 0.5 A +240 V c.a.
SENSORS
Display 128x64px backlit graphic LCD - 128x64px backlit

4 status LEDs graphic LCD
3 status LEDs
Connectivity CAN Bus of expansion CAN Bus of expansion CAN Bus of expansion CAN Bus of
2 RS 485 protocol Modbus RTU serials expansion
1 USB type A (Host) Mass Storage (FAT32)
1 mini USB type B (Device) for PC connection
1 Ethernet port 10 Modbus/TCP protocol
Memory MicroSD expansion slot for diagrams up to 16GB - -
ELECTROMECHANICAL
CO2 Transcritical System 35
Control solution with transcritical CO2 booster / parallel compression application
Code Descr. Notes
INTRODUCTION
EPAS1FCTA5U0 EWCM 9000 PRO-HF 42D SSR CC /CO2T w/integrated display &
SSR output
EPK0100000U0 EVK PRO DISPLAY /GR CC Remote Display
TM171EP14RCC1 M171 Perf. expansion 14 I/Os CC Expansion module

14/ I/O
Applications
EWCM 9000 PRO-HF allows for the controller to be adapted to specific needs thanks to the options of integrating and
changing the applicative controller software. The FREE Studio development tool allows for all the controller’s maximum
performance to be taken advantage of, re-configuring the I/O and making the most of the vast field connectivity and that
CO Transcritical Booster System

of the system found on the controller The basic library provided by Eliwell allows for the development times to be reduced

thanks also to the debugging systems, simulation and diagnostics, even remotely, that can be found in the FREE Studio system
2 Eliwell has a team specialised in supporting the developers and a network of partners capable of assisting
Furthermore,
clients in devising customised solutions.
Features
Management of 2 circuits up to 8 compressors Expandable up to 12 Expansion 14 I/O modules
Parallel booster/compression management up to 4 compressors Up to 2 optional remote displays
Management of modulating condensation fans

Gas cooler Heating Hot sanitary water
HP Control valve
MT Compressors
EWCM 9000 PRO DOMINO CO2 Transcritical

Inverter
MP Control valve
Liquid
receiver Altivar

RTX 600 /V DOMINO
Stepper Expansion valve MT Evaporators
LT Compressors
RTX 600 /VS DOMINO
PXV Expansion valve LT Evaporators

SENSORS
EWCM 9000PRO
EWCM 9000 PRO-HF 42D
42D (HF) SSR
(SSR) Expansion 14 I/O
EXP 4D PRO EVK PRO Display
Ethernet Port
USB
USB Port
mini
USB M171
ELECTROMECHANICAL
OK
Slot for memory card

(Micro SD)
36
TM171VEV
EVV Stepper System
INTRODUCTION
Code Description
TM171VEVM4CC1 EEV Driver, Autonomous & Modbus CC
Applications
The driver for the proportional motorized valve M171 EEV Driver is designed to optimize energy efficiency and the
refrigerated utilities performance. Its wide compatibility with refrigerants and with the valves on the market, whether
unipolar or bipolar, makes this product particularly flexible.
Features
Container PC+ABS UL94 V-0 plastic resin casing
Usage time 23...130°F
Storage temperature -4...185°F
Technical data TM171VEV

Dimensions: 2.75” x 3.42” frontal panel, depth 2.42”
Installation: on DIN Omega bar support
Analogue inputs: 2x NTC/Pt1000/4...20mA/0-5VC/0-10VC*
2x NTC/Pt1000
Digital inputs: 2 voltage free

Connections: • TTL (Keyb) for connection to Unicard/MFK/DMI
• TTL for Televis/Modbus connection
• RS485 for connection Televis/Modbus
Digital outputs: 1 SPST: N.O. 5A 250V~
1 Open Collector 12VC max 100mA
Accuracy: better than 0.5% of end of scale
Resolution: 0.1°C
Power supply: 24V~/C ±10% 50/60 Hz
Power consumption: 30VA / 25W
STEPPER valve compatibility*

Models Brand
SXVB 24V Bipolar Eliwell
ETS50 12V Bipolar, ETS100 12V Bipolar Danfoss
EX5 24V Bipolar, EX6 24V Bipolar, EX7 24V Bipolar, EX8 24V Bipolar Alco
SER(I) G, J, K, B, C, D 12V Bipolar Sporlan
SER 1.5 TO 20 12V Bipolar Sporlan
SEI-30 12V Bipolar, SEI-50 12V Bipolar Sporlan
SEH 12V Only bipolar model Sporlan
*if using other valves, contact Eliwell Technical Support
Wiring diagram
SENSORS
ELECTROMECHANICAL
EEV Stepper System 37
EVV Stepper System
INTRODUCTION
Codes Descr.
EVD4A31BS21U0 V910 V3 EEVD STEP VALVE 24V RS485 CC
Applications
The V910 driver for motorized electronic valve control is designed for excellent control of heat exchangers in cascade systems

with CO2, HFC and HFO refrigerants. Its flexible configuration makes it ideal for the control of hot gas bypass systems,
compressor supply temperature / pressure and liquid subcooling.
Features
Container PC+ABS UL94 V-0 plastic resin casing
Working Temperature 23...130°F
Storage temperature -4...185°F
ON/OFF
LV unit
RS485 EXP R744 (CO2)

V910 driver
V910 driver Bar LV unit
R744 (CO2)
controller valve Exchanger

EWCM EO Discharge heat
˚C Bar
ON/OFF
Exchanger Saturation
heat valve
Overheating V910 driver
Exchanger
heat
NG Unit
controller
EWCM EO
NG Unit

Modbus connected solution Solution for dual heat exchanger
The high-precision PID control of the V910 module can be controlled by V910 is designed also for operation independent from the central controller,
EWCM 9000 PRO-HF series controllers through the serial port dedicated to thus providing the option for configurations with multiple heat exchangers
share real-time configuration and the heat exchanger control status. in series or parallel to provide better power modulation and greater safety
thanks to a redundant configuration.
Compatible Valves
Brand Model Reference document
DANFOSS models ETS 50 / ETS 100 RK0YG302 dated 04/2007
SPORLAN models SER / SERI / SEI / SEH Bulletin 100-20-1 dated 05/2004
ALCO models EX4 / EX5 / EX6 / EX7 / EX8 A3,5,008,5 dated 07/2004
SENSORS
Wiring diagram
Solenoid Alarm
LOAD
valve
Supply S
Valve Output 24V~/c

max 100mA
Televis/ Modbus 11 12
(via BusAdapter) ~
OUT2 12Vc W2 W2 W1 W1 ~ NO C
MFK/DMI + -
2 3 4 5 6 7 8 9
OpenCollector
ELECTROMECHANICAL
OUT1
V910 OFF
1 2 3 4 5 6
A B C
Keyb
RS485
14 15 16 17 18 19 20 21 22 23 24
- + G DI1 DI2 GND 5Vc Pb1 Pb2 Pb3 Pb4

38
Eliwell™ TelevisGo
Monitoring and maintenance system via web
Model Description Application

INTRODUCTION
TelevisGo SSD NA /224 KIT

TGOCSE2H1U00K up to 224 controllers
SerialAdapter
TGOCSE601U00K TelevisGo SSD NA /60 KIT
up to 60 controllers
SerialAdapter
PowerAdapter TelevisGo DC
BT111124 spare power supply unit
100/240V 12V 5A 60W NA
spare / additional serial
SAT1AMM100000 SAT1AMM100000
line,includes RS-232 cable
Applications
TelevisGo is a family of devices to monitor, control and manage installations from a distance.
The product is based on a PC Embedded standard platform to offer calculation power, data filing space with solid state disc (SSD) and easy system expansion using
standard peripherals available on the market.
The Off-Line Configuration function is used for even faster installation and the repetition of settings on other plants.
Data recording and alarm management

• Recording temperature / pressure / humidity / digital inputs and outputs / functional statuses
• Recording alarm conditions and sending a signal by email and SMS
Energy reports
• Connection to energy meters with MODBUS protocol

• Dashboards dedicated to the real time and historic display of energy consumption
• Graphic display of energy consumption combined with the functional parameters of the system
Graphic display of the system

• Display and access to data and parameters of the controllers by means of a freely configurable graphic interface
• HTML interface accessible by most browsers for PC, tablet and smartphone (Internet Explorer, Mozilla, Firefox)
• The graphic interface can be planned off-line with the tools freely available for download from the site www.eliwell.com
Web connectivity
• All TelevisGo functions are accessible in remote mode with a web browser
• It is possible to access all the historic and real time information and to interact with each controller connected to the system to change its
parameters and activate the functions
• The complete management of TelevisGo is included (configuration, updating, restarting of the device)
• TelevisGo can be connected to the Internet with ADSL, 3G or 4G connections, or by configuring the LAN/WAN network to which the
device is connected
Activity automation
SENSORS
• Automation of recurrent activities such as switching the lights on and off for energy saving
• Periodic sending by e-mail of detailed reports in PDF format
• Periodic transfer of data to centralized systems for performance analysis
Algorithms and Expandability with IEC 61131

ELECTROMECHANICAL
• System extensions with new Plug & Play algorithms installable from the web interface
• Algorithms for management of floating evaporation, faulty pressure probe backup and distribution of the dewpoint for energy saving
functions
• System for the development of new algorithms for distributed management of the installation based on EcoStruxure™ Machine Expert -
HVAC with standard languages IEC 61131
Eliwell™ TelevisGo 39
Monitoring and maintenance system via web
Features
INTRODUCTION
For the end user • recording of HACCP temperatures For supermarket chains • solution can be scaled to suit the size of the
• information on energy consumption and system integrators installation
• complete, easy to use system • instruments for off line configuration, plant
cloning and configuration modification in
• open, expandable system
series
For the maintenance
• compatibility with third-party Modbus
technician • compact, reliable, ready-to-use system devices: energy measurement and HVAC
• intuitive user interface easy to learn controls
• alarm signalling via email and SMS, with priority • XML protocol open:
configuration - data sent periodically (push function)
• remote web access for diagnostics and control - transmission of data and alarms as they occur
• dedicated devices for maintenance: device

- real-time data acquisition
parameters, controls, detailed diagnostics and
- querying of data and alarm history
recording of all functional statuses
-e xecution of commands / modification of
• complete remote system updating via web: software,
controller parameters in remote mode
languages, controller drivers
-S OCKS protocol integrated for routing of
• devices for offline configuration and quick
TCP and UDP communications
modification of settings
Technical Data TelevisGo 10 / 30 / 60 / 224

User interface: from web browser
Browsers supported: • Internet Explorer 7 or later
• Mozilla Firefox 3.5 or later
• Google Chrome 16.0.x or later
User language interfaces pre-loaded: IT – EN – FR – DE – ES – PT – PL – NL – RU – CN
Operating System: MS Windows 7 Embedded

Power supply: 12VC with external power supply
100...240V~ ±10%
Power consumption: 10W max
Connections: 4 USB ports
2 RS-232 ports (for analogue modem or GSM)
2 RS-232 ports (for SerialAdapter)
1 Ethernet port (LANRJ45)
VGA monitor connection
PS2 keyboard connector
Enterprise BMS
Centralized energy
management & maintenance

Management
& monitoring
TelevisGo
Compressor racks EcoStruxure™ Building Operation
EWCM 400 PRO EWCM 9000 PRO-HF Altivar

SENSORS
Humidity/
Cold Energy Temperature
rooms Cabinets metering monitoring
ELECTROMECHANICAL
M172 Cold Box Application RTN 400 Power Meter EWSense

40
Schneider Electric EcoStruxure™ Building Operation & Eliwell™ TelevisGo
Seamless integration for greater productivity in your supermarket
INTRODUCTION
SmartX Server
EcoStruxureTM
Building Operation
Today’s smart retails require simple integration across systems, access to the latest IoT devices and
comprehensive safety solutions. With an open and secure software integration framework, EcoStruxure™
Building Operation allows collaboration across complex third-party systems to create innovative solutions. It
supports standard open protocols, and includes BTL certifications across the system’s SmartX hardware and
software. This helps integrate connected products and create future-proof architecture for retails, restaurants,
and supermarkets. EcoStruxure™ Building Operation securely facilitates the exchange of data from Schneider
Electric and third-party energy, lighting, HVAC, refrigeration (Eliwell offer), fire safety, security systems.
EcoStruxure™ Building Operation server is the core of the system and performs key functionality, such as
control logic, trend logging, and alarm supervision.
A complete and secured IP backbone architecture
Backed by advanced cybersecurity and supports industry standard and IP-based open protocols to facilitate
the secure exchange of data and analytics between critical systems from Schneider Electric and third-party
providers (IP addressing, TCP communications, DHCP, DNS, HTTP/HTTPS, NTP , SMTP or SMTPS, SNMP…).
Open building protocol support

Support for open standards. The Enterprise Server can natively communicate with the most popular standards
for buildings: BACnet, LonWorks, and Modbus.
Global view of the system / Centralized alarms and data management
The entire site, can be accessed and configured through the Enterprise and SmartX servers, are collected by
the Enterprise Server for centralized logging, display, and management. Users can also view event logs and
trend logs from multiple servers.
Manage alarms, users, schedules, and trend logs. Data from the Enterprise Server can be delivered directly to
the user or to other EcoStruxure™ BMS servers and field devices throughout the site or enterprise.
Seamless integration of Refrigeration System
Easy integration of TelevisGo Eliwell refrigeration monitoring system with IP
SENSORS
connectivity and pre-configured “widgets” for refrigeration equipment.

Dedicated service tool for refrigeration engineers with TelevisGo web interaction.
On site HACCP recordings up to 1 year and automated reports for food
preservation sent to inbox.
ELECTROMECHANICAL
Eliwell™ TelevisGo
Schneider Electric EcoStruxure™ Augmented Operator Advisor 41
Real-time information at your fingertips
INTRODUCTION
Real-time information at your fingertips
EcoStruxure™ Augmented Operator Advisor
combines contextual and local dynamic information

for mobile users, enabling them to experience a
fusion of the physical, real-life environment with
virtual objects.
Reduce downtime
Open electrical cabinet doors virtually.
Speed up operation and maintenance
Find information faster with immediate access in the
field to real-time data, user manuals, instructions,
diagrams, etc.
Reduce human errors

Locate the right equipment and guide operators
step-by-step to complete maintenance procedures.
Download and try it now
• Visit the App Store or Google Play Store and
download the EcoStruxure Augmented Operator
Advisor app to your tablet
• Open the app, then log into “Demo” mode
(no username or password required)
• Click “Sample” then select the demo Water Plant
or Wood Machine, then click ‘Scenes’ and the
start button
SENSORS
• Point the application at the selected image above

and points of interest will automatically appear
on the screen
ELECTROMECHANICAL
42
Variable Speed Drives
For code compliance and more energy efficiency
INTRODUCTION
VFD control of motors for pumps, fans and compressors is increasingly a requirement in
specification and government regulations. Altivar 212 drives enable you to ensure compliance
with requirements and optimize the energy efficiency of the system.
• With a structured programming menu system,the Altivar 212 enables fast commission of
pumps,fans, and scroll compressors.
• Tested and certified by AHRI standard 1210 (IP)
the Altivar 212 drives provide high efficiency and ®
low harmonic performance

Variable Frequency Drives
ANSI/AHRI Standard 1210
Altivar 212 and S-Flex models

certified by AHRI for efficiency.
Scroll Compressor Control Pump & Fan Control

Adapted to all types of motors • Plug and start on basic applications
Induction, BLDC and PM • More energy efficient motor control
Dedicated Functions • Compact low harmonic
• Pre-start management on “RUN” ~ TDHi <35% (ATV212)
• Periodic oiling cycle management • 98% efficiency
• Low speed operation oiling management Operating Functions
• Oil injection valve management for • Embedded PID regulator
SENSORS
high-speed running • Damper control and feedback

Asset Protection Functions • Sleep/Wake
• STO (ATV320) • Catch-on-the-fly
• Overload avoidance
• Overpressure/overtemperature avoidance
• Casing heating for condensation avoidance
ELECTROMECHANICAL
Variable Speed Drives 43
Selection guide Schneider Electric ATV 212, 320, 630, SFlex
INTRODUCTION
Scroll, Rotary, Screw,
Compressors Scroll, Rotary Scroll, Rotary
Reciprocationg Centrigugal
Step 1:
Select your Pumps All Centrifugal Centrifugal All
application

Fans All All All All
BLDC, Induction, BLDC, Induction, BLDC, Induction,

Motor Type Induction, PM
PM PM PM
Step 2: Up to 15kW - Up to 75kW - Up to 75kW - Up to 800kW -
Select your Motor HP Range
20Hp 100Hp 100Hp 1,000Hp
motor type
240V 1ph-3ph, 240V 3ph,
240V 3ph, 240V 3ph,
Voltage, Phase 480V 3ph 480V 3ph
480V 3ph 480V 3ph
600V 3ph 600V 3ph

Compact Optimum
Basic Packaged Bypass
Low Harmonic (Premium)
Advanced appli-
Step 3: Scroll advanced
ATV212 features cation functions
Select your STO
functions
Bypass 2 or 3 con- Bacnet, Modbus,
features Bacnet, Lon,
Modbus tactors Ethernet IP
modbus
IP20 Full text keypad Graphic keypad
IP21, IP55, UL
UL type 12 IP21, IP55, UL
type 1
type 1
ATV630,
ATV320 ATV212 S-Flex
ATV650

Step 4:
The right drive for your application
SENSORS
ELECTROMECHANICAL
44
S-Flex Enclosed Drive
For outdoor applications
INTRODUCTION
The S-Flex drive revolutionizes harmonic mitigation

with its innovative reduced harmonic technology
(RHT). Achieved within the diode capacitor and
power conversion section of the variable frequency
drive, eliminating the need for a line reactor or bus
reactor
- Higher equipment efficiency
- Reduced equipment cost

- Fewer points of electrical failure
- Smaller enclosure size
- Lighter weight • Optional drive input disconnect switch provides
- Horsepower range: an input line power disconnect switch between
• 1 – 40 hp at 208 VAC and 230 VAC the main power disconnect and the power /
• 1 – 100 hp at 460 VAC converter S-Flex
• Optional three-phase AC line reactor for line • Optional line contactor provides an electrically
transient protection and even further line interlocked line contactor between the main
harmonic reduction S-Flex drive uses an Altivar power disconnect and the power converter
212 drive power converter with RHT and an IGBT • Power-on mode red LED indicator
inverter with pulse-width modulated output • Bypass mode green LED indicator
• Optional LCD text keypad • Terminal block for customer’s control

• Built-in communication: Modbus, BACnet®, connections
Metasys® N2, APOGEE® P1 communication • Full-voltage bypass contactors
capability, and options for LonWorks®, 100 kA SCCR and full voltage bypass
• Smoke purge override and fan damper control Square D circuit breaker for disconnect and
in both adjustable frequency controller (AFC) and overcurrent protection
bypass modesof operation Available in Type 1, 12 and 3R enclosures
• Simple Hand/Off/Auto and VFD/ByPass selector Conduit knockouts on bottom of the enclosure
switch for operational mode control for quick and easy wiring
SENSORS
/
ELECTROMECHANICAL
TM172P for Condenser Control 45
Peak performance and maximum energy savings
Are you getting peak performance and maximum
INTRODUCTION
energy savings with your Refrigeration System?
With Eliwell’s Floating High Pressure Algorithm you’ll
wring out additional energy savings while delivering
peak performance in you refrigeration equipment.
Lower high pressure at the compressor

+
Lower condensing temperature at the condenser
Energy $s Saved!

Optimize Performance & Energy
Usage with M172P -
Floating High Pressure Control

S-Flex Enclosed VSD
Main characteristics
Modcon 172
Optimum efficiency regardless of outdoor air temperature
Compliance with Energy specifications for new and existing
cooling and refrigeration existing equipment
Precise control of condensers fan with VSD or contactors
Variable High pressure control according to outside air
temperature evolution
Control fan motors frequency and/or on/off state
Smooth and efficient operation with floating high pressure
SENSORS
control by reducing stress on the compressor ATV-122 VSD

Reduce short cycling of the compressor
Customer benefits / Performance

• Machine energy consumption reduction by average of 20%
• Machine condenser noise level reduction
ELECTROMECHANICAL
• Extended machine life – reduced life cycle cost.

46
NTC, PTC & TC Probes
NTC semi-conductor temperature probes
INTRODUCTION
NTC Probes
level of Operating Control

Codes Descritpion Tip material Tip dimensions Cable type Isolation Length Connector
protection temperature Family
PB691151 NTC 1.5m IP67 6X15 PVC tip -50+110°C black JST EWPlus-RTN
1.5 Meters
JST
PB691301 NTC 3.0m IP67 6X15 PVC tip -50+110°C black JST Thermoplastic EWPlus-RTN
Thermoplastic
6x15 mm 1500 Vac IP67 -50..120 °C 3.0 Meters
rubber Rubber
any w/screw
PB691150 NTC 1.5m IP67 6X15 PVC tip -50+110°C Black
1.5 Meters connection
Ferrules
any w/screw
PB691300 NTC 3.0m IP67 6X15 PVC tip -50+110°C Black
3.0 Meters connection
any w/screw
PB8DED11502C0 NTC 1.5m IP68 5x20 TPE tip -50+110°C Grey
Ferrules connection
PB8DED1150BC0 NTC 1,5m IP68 5x20 TPE tip -50+110°C Grey RAST 1.5 Meters
RAST nEW
PB8DED1150CC0 NTC 1,5m IP68 5x20 TPE tip -50+110°C Grey JST JST EWPlus-RTN
Thermoplastic
5x20 mm
rubber
any w/screw
PB8DED13002C0 NTC 3.0m IP68 5x20 TPE tip -50+110°C Grey
Ferrules connection
PB8DED1300BC0 NTC 3.0m IP68 5x20 TPE tip -50+110°C Grey RAST 3.0 Meters
RAST nEW
Thermoplastic
PB8DED1300CC0 NTC 3.0m IP68 5x20 TPE tip -50+110°C Grey JST Rubber (ext) Poly- 2000 Vac -50..110 °C
JST EWPlus-RTN
propilene (int)
any w/screw
PB8DAE11502C0 NTC 1,5m IP 68 6x20 -50+110°C GRIGIO
Ferrules connection
PB8DAE1150BC0 NTC 1,5m IP68 6x20 SS tip -50+110°C Grey RAST IP68 1.5 Meters
RAST nEW
Stainless steel
PB8DAE1150CC0 NTC 1.5m IP68 6x20 SS tip -50+110°C Grey JST 6x20 mm
AiSi 304 JST EWPlus-RTN
PB8DAE1300BC0 NTC 3,0m IP68 6x20 SS tip -50+110°C RAST RAST nEW
3.0 Meters
PB8DAE1300CC0 NTC 3.0m IP68 6x20 SS tip -50+110°C Grey JST JST EWPlus-RTN
PB8TPD4150BE0 NTC 1.5m 6x25 PVC tip -50+110°C RAST

1.5 Meters RAST nEW
Thermoplastic Thermoplastic
6x25 mm 1500 Vac -50..105 °C
rubber Rubber
PB8TPD4300BE0 NTC 3.0m 6x25 PVC tip -50+110°C RAST 3.0 Meters RAST nEW
any w/screw
SN8DEP12002C0 Food Probe simulator, 2M cable, -50+110°C 2.0 Meters Ferrules
Thermoplastic connection
Thermoplastic
ᶲ 110 mm Rubber (ext) Poly- 2000 Vac -50..110 °C
rubber
propilene (int) any w/screw
SN8DEP15002C0 Food Probe simulator, 5M cable, -50+110°C 5.0 Meters Ferrules
connection
SENSORS
PTC probes
M172
PB7S0A1500 PTC 6X40 1.5m SILICONE 1.5 Meters
EWCM 9000
Stainless steel AiSi 304 6x40 mm Silicone 2000 Vac IP67 -50..120 °C Ferrules
PB7S0A3000 PTC 6X40 1.5m SILICONE 3.0 Meters
ELECTROMECHANICAL
Pt1000 probes
M171,M172
PB9S0A2500 PT1000 6X40 2.5m SILICONE Stainless steel AiSi 304 6x40 mm Silicone 2000 Vac IP67 -50..200 °C 2.5 Meters Ferrules EWCm,
EEV Driver
References 0RGLFRQ00ORJLFFRQWUROOHUV
Measurement
Humidity & Temperature Sensorsaccessories 47
Monitoring and managing asset performance
INTRODUCTION
5HIHUHQFHV
Designation 8VH 'HVFULSWLRQ 5HIHUHQFH Weight
$SSOLFDWLRQV NJ
lb
Measurement accessories
7HPSHUDWXUHFRQWURO
17&SUREH Outside air - IP 65 706717&: 0.050/
- Wall mounting 0.110

b Temperature control: -50…100 °C
(-58...212 °F) - NTC 10kOhm /25°C
17&SUREH Inside air (room) - IP 30 706717&:1 0.050/

b Temperature control: -25…40 °C - Indoor wall mounting 0.110
(-13…104 °F) - NTC 10kOhm /25°C

+XPLGLW\FRQWURO
+XPLGLW\SUREH Multi-purpose - IP 65 TM1SHC4 0.140/
b Humidity control: 0…100% - Wall mounting 0.308
- 4-20 mA
+XPLGLW\ WHPSHUDWXUHFRQWURO
+XPLGLW\ WHPSHUDWXUHSUREHV Multi-purpose - IP 65 706+7&1 0.140/

b Temperature control: -40…60 °C - 4-20 mA, NTC 10kOhm /25°C
(-40...140 °F)
Multi-purpose - IP 65 TM1SHTCC4 0.140/

b Temperature control: -40…60 °C - 2x 4-20 mA
(-40...140 °F)
Multi-purpose - IP 65 TM1SHTM4 0.140/

b Temperature control: -40…60 °C - 2x Modbus ports embedded
(-40...140 °F) (RS-485 /Modbus RTU)
SENSORS
ELECTROMECHANICAL
48
EWPA 007 - 030 - 050
Pressure transducers
INTRODUCTION
Applications
EWPA pressure transducers are sensors capable of transmitting a signal by way of a current output to the measuring instruments with which they are connected.
Technical data EWPA 007 EWPA 010 EWPA 030 EWPA 050
Operating range 0..7 Bar g 0..10 Bar g 0..30 Bar g 0..50 Bar g
Output signal 2 wires 4...20 mA
Overload 2 times pressure range
Power supply 8...32V
Accuracy ± 0.5% FS max (linearity, hysteresis, repeatability)
Compensated temperature 0...120°F
Electrical connections 2 m cable with Packard connector
Mechanical connections male connector / female connector

¼ SAE (7/16"-20UNF)
Operating temperature -40...212°F
Global error at T 0...50°C max. ± 1.0% FS
Global error at T -10...80°C max. ± 1.5 FS
Response time (0...99%) <5ms
Material exposed to AISI 316L Viton outer seal
environment
Enclosure rating Packard: IP67 cable: IP54
Codes Description Fitting Electrical connection

TD24A007 EWPA 007
TD24A030 EWPA 030 Male 1/4 SAE (7/16 20UNF)

TD24A050 EWPA 050
TD34A007 EWPA 007 Packard
TD34A010 EWPA 010

Female 1/4 SAE (7/16 20UNF)
TD34A030 EWPA 030
TD34A050 EWPA 050
CO00096 2 meter cable Packard

SENSORS
ELECTROMECHANICAL
EWPA 007 - 030 - 050 49
Ratiometric pressure transducers
INTRODUCTION
Codes Description Fitting Electrical connection
TD42A010 EWPA 007

Female 1/4
TD42A030 EWPA 030 SAE (7/16 Packard
20UNF)
TD42A050 EWPA 050
CO000096 2 mt. Cable Packard

Applications
EWPA ratiometric pressure transducers are sensors capable of transmitting a signal by way of a voltage output to the measuring instruments with which they are
connected. They offer accurate performance across a wide temperature range.
Technical data EWPA 010 EWPA 030 EWPA 050

Operating range at 0.5...4.5V 0...10 bar (relative) 0...30 bar (relative) 0...50 bar (relative)
Output signal 3 wires 0.5...4.5V ratiometric 3 wires 0.5...4.5V ratiometric 3 wires 0.5...4.5V ratiometric
Overload 2.5 times pressure range 2.5 times pressure range 2.5 times pressure range
Power supply 5.0Vdc± 0.5V 5.0VAC ± 0.5V 5.0VAC ± 0.5V
Accuracy ± 0.25% FS max ± 0.25% FS max ± 0.25% FS max
(linearity, hysteresis, repeatability) (linearity, hysteresis, repeatability) (linearity, hysteresis, repeatability)
Energy consumption max 8 mA max 8 mA max 8 mA

Load resistance > 5KΩ > 5KΩ > 5KΩ
Electrical connections 2 m cable with packard connector 2 m cable with packard connector 2 m cable with packard connector
Mechanical connections female connector female connector female connector
¼ SAE (7/16"-20UNF) ¼ SAE (7/16"-20UNF) ¼ SAE (7/16"-20UNF)
Operating temperature -40...257°F -40...257°F -40...257°F
Global error at T 0...50°C max. ± 1.0% FS max. ± 1.0% FS max. ± 1.0% FS
Global error at T -10...80°C max. ± 1.5% FS max. ± 1.5% FS max. ± 1.5% FS
Response time (0...99%) <5ms (0...99%) <5ms (0...99%) <5ms
Material exposed to environment AISI 316L AISI 316L AISI 316L
Viton outer seal Viton outer seal Viton outer seal
Enclosure rating IP67 IP67 IP67

Drip protection - Plexiglass protection
Protections for 32x74 controllers
SENSORS
Applications
These accessories can be used with devices in the ID, IC, IDPlus, EW, EWPlus series.
The drip protection, applied to the rear of the instrument, are a valid support in protecting electrical connectors against dripping liquid.
The plexiglass accessory, equipped with a surface easy to clean, is particularly suitable for use in outdoor environments or characterized by a high degree of dirt.
ELECTROMECHANICAL
Code Description Details

ZZ000270 Drip protection Pack of 20
ZZ000272 Plexiglass protection for controllers 32x74 Pack of 10
50
D16P
Adjustable single pressure controllers
INTRODUCTION
Applications
D16P are electromechanical pressure controllers for high and low pressure, equipped with an SPDT switch that
closes and opens as the pressure increases or decreases.
Technical data D16P
Compatible refrigerants R22, R407A, R407C, R134a, R404A, R410A, **

Maximum Temperature System (TS) 120 °C (248 °F)

Working ambient temperature -40 ...65 °C (-40 ... 149 °F)
Storage and transport conditions -40 ...70 °C (-40 ... 158 °F) 10...90 %RH (no condensing)
Contact configuration SPDT
Electrical load and rated current ENEC UL
16 (16) A resistive inductive 240 Vac 16 FLA - 96 LRA 240 Vac
1(1) A resistive inductive 240 Vac 3 HP 240 Vac
2 HP 120 Vac
Degree of protection provided by enclosure IP44 automatic reset with top cover
IP30 manual reset with top cover
IP20 without top cover
Maximum Pressure System (PS) RANGE PS
-0.3 ... 7 bar (-4.35 ... 101 psi) 17 bar (246 psi)
7 ... 20 bar (101 ... 290 psi) 25 bar (362 psi)
7 ... 31 bar (101 ... 449 psi) 35 bar (507 psi)
10 ... 45 bar (145 ... 652 psi) 50 bar (725 psi)
Burst Pressure RANGE BURST PRESSURE
-0.3 ... 7 bar (-4.35 ... 101 psi) 80 bar (1160 psi)
7 ... 20 bar (101 ... 290 psi) 100 bar (1450 psi)
7 ... 31 bar (101 ... 449 psi) 140 bar (2030 psi)
10 ... 45 bar (145 ... 652 psi) 200 bar (2900 psi)
Mounting Threaded holes on back of the case for M4x5 screws
Adjustment hexagonal headshape and cross profile screws, for range and differential
** please contact Eliwell sales dept. for not listed refrigerants.
SENSORS
ELECTROMECHANICAL
D16P 51
Adjustable single pressure controllers
INTRODUCTION
pressure range differential accessories included in standard
code type reset fitting
bar (psi) bar (psi) individual packing
D16P07A01MS200 Low press control auto reset -0.3...7 (-0.4…100) Adjustable 0.6...4 (9…58) Automatic Male 7/16-20UNF top cover, knob, Instruction Sheet
D16P07A01CS200 Low press control auto reset -0.3...7 (-0.4…100) Adjustable 0.6...4 (9…58) Automatic Capillary & Flare Nut 1mt top cover, knob, Instruction Sheet
D16P07M01MS200 Low press control manual reset -0.3...7 (-0.4…100) fixed >= 0.6 ( 9 ) Manual Male 7/16-20UNF top cover, knob, Instruction Sheet
D16P07M01CS200 Low press control manual reset -0.3...7 (-0.4…100) fixed >= 0.6 ( 9 ) Manual Capillary & Flare Nut 1mt top cover, knob, Instruction Sheet

D16P20A01MS200 Fan press control auto reset 7...20 (100…290) Adjustable 1.5...6 (21…87) Automatic Male 7/16-20UNF top cover, knob, Instruction Sheet
D16P20A01CS200 Fan press control auto reset 7...20 (100…290) Adjustable 1.5...6 (21…87) Automatic Capillary & Flare Nut 1mt top cover, knob, Instruction Sheet
D16P30A01MS200 high press control auto reset 7...31 (100…450) Adjustable 2...8 (35…115) Automatic Male 7/16-20UNF top cover, knob, Instruction Sheet
D16P30A01CS200 high press control auto reset 7...31 (100…450) Adjustable 2...8 (35…115) Automatic Capillary & Flare Nut 1mt top cover, knob, Instruction Sheet
D16P30M01MS200 high press control man. reset 7...31 (100…450) fixed >= 3.0 ( 45 ) Manual Male 7/16-20UNF top cover, knob, Instruction Sheet
D16P30M01CS200 high press control manual reset 7...31 (100…450) fixed >= 3.0 ( 45 ) Manual Capillary & Flare Nut 1mt top cover, knob, Instruction Sheet
D16P45A01MS200 high press control auto reset 10...45 (145…650) Adjustable 5...15 (70…215) Automatic Male 7/16-20UNF top cover, knob, Instruction Sheet
D16P45M01MS200 high press control manual reset 10...45 (145…650) fixed >= 4.0 ( 58 ) Manual Male 7/16-20UNF top cover, knob, Instruction Sheet

Dimensions
Available pressure connections
49
80
46.5
(M)
25

68.5

25
100.5

(B)
S12 (M)
7/16-20UNF
49
80
46.5
(C)
(B)
25
68.5
25
SENSORS
97.8
(C)
M = 7\16-20UNF
C = capillary
52.5
ELECTROMECHANICAL
52
D17P
Adjustable single pressure controllers by dual pressure controllers
INTRODUCTION
Applications
D17P are electromechanical dual pressure controllers for high and low pressure, equipped with 2 indipendent SPDT switches
that closes and opens as the pressure increases or decreases.
Technical data D17P
Compatible refrigerants R22, R407A, R407C, R134a, R404A, R410A **

Maximum Temperature System (TS) 120 °C (248 °F)

Contact configuration 2 x SPDT
2 HP 120 Vac
Degree of protection provided by enclosure IP44 automatic reset with top cover
Maximum Pressure System (PS) RANGE PS
-0.3 ... 7 bar (-4.35 ... 101 psi) 17 bar (246 psi)
7 ... 31 bar (101 ... 449 psi) 35 bar (507 psi)
10 ... 45 bar (145 ... 652 psi) 50 bar (725 psi)
Burst Pressure RANGE BURST PRESSURE
-0.3 ... 7 bar (-4.35 ... 101 psi) 80 bar (1160 psi)
7 ... 31 bar (101 ... 449 psi) 140 bar (2030 psi)
10 ... 45 bar (145 ... 652 psi) 200 bar (2900 psi)
** please contact Eliwell sales dept. for not listed refrigerants.
SENSORS
ELECTROMECHANICAL
D17P 53
Adjustable single pressure controllers by dual pressure controllers
pressure range differential accessories included in
INTRODUCTION
code type reset fitting
bar (psi) bar (psi) standard individual packing
Dual press control -0.3...7; 7...31 LP Adjustable 0.6...4 (9…58);
D17P30AA1MS100 Automatic - Automatic Male 7/16-20UNF top cover, Instruction Sheet
auto-auto reset (-0.4…100; 100…450) HP fixed >= 3.0 ( 45 )
D17P30AA1CS100 Automatic - Automatic Capillary & Flare Nut 1mt top cover, Instruction Sheet
D17P30AM1MS100 Automatic - Manual HP Male 7/16-20UNF top cover, Instruction Sheet
auto-manual reset (-0.4…100; 100…450) HP fixed >= 3.0 ( 45 )
D17P30AM1CS100 Automatic - Manual HP Capillary & Flare Nut 1mt top cover, Instruction Sheet
Dual press control -0.3...7; 7...31 LP fixed 0.6 ( 9 );
D17P30MM1MS100 Manual - Manual Male 7/16-20UNF top cover, Instruction Sheet
manual-manual reset (-0.4…100; 100…450) HP fixed >= 3.0 ( 45 )
Dual press control -0.3...7; 7...31 LP fixed 0.6 ( 9 );

D17P30MM1CS100 Manual - Manual Capillary & Flare Nut 1mt top cover, Instruction Sheet
manual-manual reset (-0.4…100; 100…450) HP fixed >= 3.0 ( 45 )

D17P45AA1MS100 Automatic - Automatic Male 7/16-20UNF top cover, Instruction Sheet
D17P45AM1MS100 Automatic - Manual HP Male 7/16-20UNF top cover, Instruction Sheet

Dimensions

49 107.8 46.5
25
(M)
4-M4

25
100.5
106.3
(B)
49 107.8 46.5
(C)
25
SENSORS
4-M4
25
100.5
106.3
M = 7\16-20UNF
B = braze
C = capillary
ELECTROMECHANICAL
52
54
D16T
Adjustable temperature controllers
INTRODUCTION
Applications
D16T are electromechanical temperature controllers equipped with an SPDT switch that closes and opens as the temperature
increases or decreases.
Technical data D16T

Contact configuration SPDT
2 HP 120 Vac
Degree of protection provided
IP44 automatic reset with top cover
by enclosure
Dimensions
49 80
46.5
25
68.5
25
(C) (T)
Available pressure connections (A) (C)

SENSORS
49 80
46.5
25
68.5
25
(C) (T)
ELECTROMECHANICAL
C = capillary
A = ambient
T = coiled end
52.5
D16T 55
Adjustable temperature controllers
INTRODUCTION
temperature sensor accessories included in
code type differential °C (°F) reset sensor type
range °C (°F) length standard individual packing
Temperature control
D16T15AAC2S200 -20\+15 (-4\+59) adjustable 2…5 (3.5…9) automatic straight capillary 2m top cover, knob, Instruction Sheet
auto-reset
Temperature control
auto-reset
Temperature control
auto-reset
Temperature control
auto-reset
Temperature control
D16T15AFC2S200 -20\+15 (-4\+59) fixed 2 (3.5) automatic straight capillary 2m top cover, knob, Instruction Sheet
auto-reset

Temperature control
auto-reset
Temperature control
auto-reset
Temperature control
auto-reset
Temperature control
D16T15MFC2S200 -20\+15 (-4\+59) fixed 2 (3.5) manual straight capillary 2m top cover, knob, Instruction Sheet
manual-reset
Temperature control
manual-reset
Temperature control
manual-reset
Temperature control
manual-reset
Temperature control

D16T15AAT2S200 -20\+15 (-4\+59) adjustable 2…5 (3.5…9) automatic coiled end Ø 9.3x40mm 2mt overall top cover, knob, Instruction Sheet
manual-reset
Temperature control
D16T15MFT2S200 -20\+15 (-4\+59) fixed 2 (3.5) manual coiled end Ø 9.3x40mm 2mt overall top cover, knob, Instruction Sheet
manual-reset
Temperature control
D16T15AAB2S200 -20\+15 (-4\+59) adjustable 2…5 (3.5…9) automatic bulb Ø 6 x 70mm 2mt overall top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T15AAA0S200 -20\+15 (-4\+59) adjustable 2…5 (3.5…9) automatic cage Ø 40mm 40mm top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T15AFA0S200 -20\+15 (-4\+59) fixed 2 (3.5) automatic cage Ø 40mm 40mm top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T25AAC2S200 -10\+25 (+14\+77) adjustable 5…10 (9…18) automatic straight capillary 2m top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T25AAC3S200 -10\+25 (+14\+77) adjustable 5…10 (9…18) automatic straight capillary 3m top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T25AAT2S200 -10\+25 (+14\+77) adjustable 5…10 (9…18) automatic coiled end Ø 9.3x40mm 2mt overall top cover, knob, Instruction Sheet
auto-reset

Temperature control
D16T25AAB2S200 -10\+25 (+14\+77) adjustable 5…10 (9…18) automatic bulb Ø 6 x 70mm 2mt overall top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T25AAA0S200 -10\+25 (+14\+77) adjustable 5…10 (9…18) automatic cage Ø 40mm 40mm top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T25AFA0S200 -10\+25 (+14\+77) fixed 2 (3.5) automatic cage Ø 40mm 40mm top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T40AAA0S200 +5\+40 (+41\+104) adjustable 2…5 (3.5…9) automatic cage Ø 40mm 40mm top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T40AAB2S200 +5\+40 (+41\+104) adjustable 2…5 (3.5…9) automatic bulb Ø 10 x 80mm 2mt overall top cover, knob, Instruction Sheet
auto-reset
Temperature control
D16T05AAT2S200 -40\-5 (-40\+23) adjustable 2…5 (3.5…9) automatic coiled end Ø 9.3x40mm 2mt overall top cover, knob, Instruction Sheet
auto-reset
SENSORS
ELECTROMECHANICAL
56
Accessories D Controls
Accessories for D pressure and temperature controllers
INTRODUCTION
 
Code Description Note

D00P00FN110100  D controls coupling 1.0mt w\o valve D16P-D17P only
D00P00FN115100 D controls coupling 1.5mt w\o valve D16P-D17P only

D00A00BF100100  D controls flat mounting bracket
D00A00BA100100  D controls angle mounting bracket
D00A00TC116100  D16 top cover
D00A00TC117100  D17 top cover
D00A00KN100100  D controls adjusting knob
D00T0MCC100100  D controls capillary clip metal D16T only

SENSORS
ELECTROMECHANICAL
Accessories
ELECTROMECHANICAL SENSORS VARIABLE SPEED DRIVES SOLUTIONS FOR LARGE STORES SOLUTIONS FOR SMALL STORES INTRODUCTION
57
58
DeviceManager
Controller configuration software
INTRODUCTION
Codes Descr.
TM171ADMI M171Opt. Programmable cable
DMI1003002000 W/RTN Device Manager
Applications
DeviceManager is a Windows software used to manage and for the first installation of Eliwell devices. The software can be used to create and save parameter
mapping and transfer it to and from the controller with a few clicks.
DeviceManager needs the USB communication interface DeviceManager Interface (DMI) to communicate with controllers directly and is compatible with Unicard
USB and Multi Function Key to transfer maps, parameters and controller firmware updating.
Features
Graphic interface
Eliwell instrument parameter management
Real-time variable monitoring and management
System requirements DeviceManager

Operating system: • Windows XP Pro SP2, Italian and English.
• Windows XP Home SP2, Italian and English.
• Windows 2000 Professional SP4, Italian and English.

• Windows 7 Premium, Windows 7 Professional, Windows 7 Ultimate, versions 32bit, Italian-English
• Windows 10
Software components required • .NET Framework 2.0
besides operating system:
Minimum hardware: • graphics resolution 1024x768
• 700MHz CPU
• RAM 256MB
• HD 1GB
• Mouse or equivalent navigation system
Space required on disk: Approx. 500 MB for normal installation (2 languages, 50 models)
Accessories
Code Description Details
CO111127 TTL cable 3.3’ reinforced cable

COLV000016200 USB-A/A 2MT extension lead Length 2m
Unicard - Copy Card - Multi Function Key

Memory for fast configuration and updating of controllers
Codes Descr.
CCAOBHT00UU00 (A) EW + Unicard
CCOS00A00M000 (B) EW + Copycard
TM171AMFK (C) M171 Opt. Programming stick
CCOOBOT008004 nEW interface and copycard
SENSORS
(A) (B) (C)
Applications
The new USB/TTL Unicard is a memory device for rapid parameter configuration/duplication, specifically designed for controllers in the IDPlus family.
By downloading the DeviceManager software from the www.eliwell.com website, maps for instruments in the ID and IDPlus families can be read and written on
the Unicard device without having to use other interfaces/licences.
Copy Card is a memory device for rapid Eliwell controller parameter configuration/duplication. Multi Function Key is used with DeviceManager to transfer maps,
ELECTROMECHANICAL
parameters and controller firmware updating.
Common features
Unicard has a standard USB port for connection to the most widely-used power supply units and adapters on the market (mains-powered, machine-powered,
battery-powered, etc.).
Updating device parameter values
Updating device firmware/applications
59
INTRODUCTION
DISCLAIMER
This document is the exclusive property of Eliwell Controls s.r.l. and may not be reproduced or circulated unless expressly authorised by
Eliwell Controls s.r.l. While all possible care has been taken to ensure the accuracy of this document, Eliwell Controls s.r.l. cannot accept
SENSORS
liability for any damage resulting from its use. The same applies to any person or company involved in the creation and preparation of this
document. Eliwell Controls s.r.l. reserves the right to make changes or improvements at any time without notice.
ELECTROMECHANICAL
The type approval marks associated with each individual instrument are present on specific part numbers only. Check details and
availability with sales department.

North America - HEADQUARTERS
Schneider Electric
200 North Martingale Road
Suite1000
Schaumburg, IL 60173 USA
Sales
T Contact your Schneider Electric Representative
E [email protected]
Technical support
T 1-888-778-2733
E [email protected]
Contact us
NEW WEBSITE
www.eliwell.com
NA-02 • rel. 1/19

© Copyright Eliwell Controls s.r.l. 2018 - All rights reserved
Eliwell has been making control systems and services for commercial and industrial refrigeration and air conditioning
units for more than 35 years, offering highly innovative and technologically advanced products. Eliwell is a company
of the Schneider Electric Group. Subscribe to our newsletter on the site www.eliwell.com.

998-20710038 - Eliwell - NA - 2019a - Catalog - GMA - Brochure

Uploaded by

Copyright:

Available Formats

998-20710038 - Eliwell - NA - 2019a - Catalog - GMA - Brochure

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

998-20710038 - Eliwell - NA - 2019a - Catalog - GMA - Brochure

Uploaded by

Copyright:

Available Formats

SOLUTIONS for

Solutions for Small Stores 8-25

Solutions for Large Stores 26-41

TM171O Condensing Unit Application Improve efficiency & allow connectivity 30

Variable Speed Drives 42-44

Humidity & Temperature Sensors 47

Introducing Schneider Electric EcoStruxure™

need for connected solutions.

The EcoStruxure™ architecture is based on a three-tiered technology stack, bringing energy,

and replace’ solution.

In addition to meeting customer demands for sustainability, we are bringing IoT-enabled

SOLUTIONS FOR SMALL STORES

SOLUTIONS FOR LARGE STORES

VARIABLE SPEED DRIVES

Environmental sustainability Operational efficiency

Total cost of ownership Flexibility and brand promise

Machine safety and consumer information

EcoStruxure™ Machine Advisor for OEMS self-contained equipment, to follow up

EcoStruxure™ Building Operation for OEMs or integrators to optimize operation cost in

• Restaurants & food service

EcoStruxure™ Machine Advisor

...To supermarket Architectures

SOLUTIONS FOR SMALL STORES

SOLUTIONS FOR LARGE STORES

VARIABLE SPEED DRIVES

Remote cases Cold rooms

• ENERGY COSTS: With increasing energy costs, it is paramount to improve

• GOVERNMENT REGULATIONS: Increasing regulatory demands with DOE 2017, EPA,

• COMPETITIVENESS IN A CHANGING MARKETPLACE: New strategies and technologies

EcoStruxure™ Facility Expert EcoStruxure™ Machine Advisor

SOLUTIONS FOR SMALL STORES

SOLUTIONS FOR LARGE STORES

VARIABLE SPEED DRIVES

EcoStruxure™ Machine Advisor

RTN400 EWSense TM172 EWSense

EWSense Humidity Altivar EWSense Humidity

EcoStruxure™ Facility Expert

SOLUTIONS FOR LARGE STORES

VARIABLE SPEED DRIVES

Distribution - IOT CO2, EWSense

Complete mini-BMS including refrigeration,

• Installation made easier with rapid connectors and

Model Application Notes

SOLUTIONS FOR SMALL STORES

SOLUTIONS FOR LARGE STORES

• Variety of display colors

VARIABLE SPEED DRIVES

• Advanced control algorithms contribute to energy saving up to 39%* with no modification of

counter structure needed

• Advanced algorithms for defrost management on the 2nd evaporator

Direct load management up to 2 Hp and power supply of 230V~ or 115V~

Use of removable/faston/screw connectors for quick, versatile hookup

Model Application Notes

Ventilated units 2Hp relay, 3 configurable outputs (defrost/fans/lights/alarm/stand-by)

LOW ENERGY CONSUMPTION

39% Longer-lasting components

• Solution for combined counters, double evaporator or double

SOLUTIONS FOR SMALL STORES

Model Application Notes

• Advanced control algorithms contribute to energy saving up to 39%* with no modification of

• Advanced algorithms for defrost management on the 2nd evaporator

• Solution for combined counters, double evaporator or double