0% found this document useful (0 votes)
29 views3 pages

Dtc144eua Transistor

This document provides specifications for a digital transistor in an SOT-323 package including: 1) The transistor has built-in bias resistors that enable configuration as an inverter without external resistors. 2) Maximum ratings including a collector-base voltage of 50V, collector current of 100mA, and junction temperature of 150°C. 3) Electrical characteristics including a minimum input voltage of 3V to turn on, maximum output voltage of 0.3V, and typical transition frequency of 250MHz.

Uploaded by

data
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
29 views3 pages

Dtc144eua Transistor

This document provides specifications for a digital transistor in an SOT-323 package including: 1) The transistor has built-in bias resistors that enable configuration as an inverter without external resistors. 2) Maximum ratings including a collector-base voltage of 50V, collector current of 100mA, and junction temperature of 150°C. 3) Electrical characteristics including a minimum input voltage of 3V to turn on, maximum output voltage of 0.3V, and typical transition frequency of 250MHz.

Uploaded by

data
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

DTC144EUA

SOT-323 DIGITAL TRANSISTORS


TRANSISTOR (NPN)

FEATURES
* Built-in bias resistors enable the configuration of an inverter
circuit without connecting external input resistors.
* The bias resistors consist of thin-film resistors with co-
mplete isolation to allow negative biasing of the input.
They also have the advantage of almost completely El-
iminating parasitic effects.
SOT-323
* Only the on/off conditions need to be set for operation mark-
ing device design easy.

MECHANICAL DATA 0.053(1.35)


* Case: Molded plastic 0.045(1.15)

* Epoxy: UL 94V-O rate flame retardant


0.006(0.15) 0.043(1.10)
* Lead: MIL-STD-202E method 208C guaranteed 0.003(0.08) 0.035(0.90)

* Mounting position: Any 0.004(0.10)


REF 0.021(0.53)
* Weight: 0.006 gram 0.000(0.00)

0.096(2.45)
0.016(0.40) 0.085(2.15)
0.008(0.20)

1
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS 0.055(1.40) 0.087(2.20)
0.047(1.20) 3 0.079(2.00)
O
Ratings at 25 C ambient temperature unless otherwise specified.
(2) (1) 2

(1) IN
(2) GND
(3) OUT Dimensions in inches and (millimeters)
(3)

MAXIMUM RATINGES ( @ TA = 25oC unless otherwise noted )

RATINGS SYMBOL VALUE UNITS

Collector-base Voltage V(BR)CBO 50 V

Collector-emitter Voltage V(BR)CEO 50 V

Emitter-base Voltage V(BR)EBO 5 V

Collector Current IC 100 mA

Collector Power dissipation PC 200 mW

o
Junction temperature TJ 150 C
o
Storage Temperature TSTG -55 to +150 C

ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted )

CHARACTERISTICS SYMBOL MIN. TYP. MAX. UNITS

(VCC= 5V,IO=100mA) VI(off) - - 0.5 V


Input voltage
(VO= 0.3V,IO=2mA) VI(on) 3 - - V

Output voltage (IO/II=10mA/0.5mA) VO(on) - - 0.3 V

Input current (VI= 5V) II - - 0.18 mA

Output current (VCC= 50V,VI=0) IO(off) - - 0.5 uA

DC current gain (VO= 5V,IO= 5mA) GI 68 - -

Resistance ratio R2/R1 0.8 1 1.2

Transition frequency (VO= 10V,IO= 5mA,f=100MHz) fT - 250 - MHz

Input resistance R1 32.9 47 61.1 KW

NOTE: "Fully ROHS compliant", "100% Sn plating (Pb-free)". 2006-3


RATING AND CHARACTERISTICS CURVES ( DTC144EUA )

100 10m
Vo = 0.3V 5m VCC =5V
50
2m
VI(on), INPUT VOLTAGE (V)

IO, OUTPUT CURRENT (A)


20 1m
10 Ta = -40 OC
500u
25 OC Ta = 100 OC
5 100 OC 200u
25 OC
100u -40OC
2 50u
1 20u
500m 10u
5u
200m
2u
100m 1u
100u 200u 500u 1m 2m 5m 10m 20m 50m 100m 0 0.5 1.0 1.5 2.0 2.5 3.0
IO, OUTPUT CURRENT (A) VI(off), INPUT VOLTAGE (A)
Figure1 Input voltage vs. output current Figure2 Output current vs. input voltage
(ON characteristics) (OFF characteristics)
1K 1
Vo = 5V 500m IO/II =20
500
VO(on), OUTPUT VOLTAGE (V)

Ta =100 OC
25 OC
200 -40OC 200m Ta = 100 OC
GI, DC CURRENT GAIN

25 OC
100 100m -40OC
50
50m
20 20m
10 10m
5 5m

2 2m
1 1m
100u 200u 500u 1m 2m 5m 10m 20m 50m 100m 100u 200u 500u 1m 2m 5m 10m 20m 50m 100m
IO, OUTPUT CURRENT (A) IO, OUTPUT CURRENT (A)
Figure3 DC current gain vs. output current Figure4 Output voltage vs. output current

R1 OUT
IN
R2
GND

IN OUT

GND

Figure5 Equivalent circuit


DISCLAIMER NOTICE

Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.

Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.

You might also like