Broschuere BRT Hartner A4 E

Download as pdf or txt
Download as pdf or txt
You are on page 1of 20

EN

BRT_Product brochure_2022/05/01_Version1

Opening, Dosing and Sorting Systems,


Mixing and Conditioning Units,
BRT HARTNER | Lengericher Straße 1 | 49479 Ibbenbüren | Germany
Stationary Shredders
www.brt-hartner.de | E-Mail: sales-BRT-HARTNER@f-e.de

1. All specifications, descriptions and illustrations are subject to change without prior notice.
2. Illustrations and descriptions may include options which are not part of the standard equipment. f-e.de
Notizen

Inhalt

5 BRT HARTNER BO 23 BRT HARTNER BPS


Bag Opener Papersorter
7 BRT HARTNER BOS 25 BRT HARTNER SD
Bag Opener for small plastic bags Trommel Screen
9 BRT HARTNER BB 27 BRT HARTNER ST
Bale Breaker Tommel Screen
11 BRT HARTNER D 29 BRT HARTNER SC
Feed and Metering Hopper Coarse Screen
13 BRT HARTNER MF 31 BRT HARTNER SF
Moving Floor Conveyor Fine Screen
15 BRT HARTNER DC 33 BRT HARTNER BBS
Decompactor Air Belt Separator
17 BRT HARTNER DM 35 BRT HARTNER EWD
Digestate Mixer Dismantler
19 BRT HARTNER DCD 37 BRT HARTNER BD
Digestate Conditioner Bale Dewiring
21 BRT HARTNER BS 39 BRT HARTNER PS / PD
Ballistic Separator Perforator

2 3
BO
BRT HARTNER BO

BAG OPENER BO 13 | BO 17 | BO 23

BAG OPENER ›

Virtually 100% opening and emptying of the plastic bags
High opening rate of “bags within bags”
› Suitable for a wide range of material, e.g. household waste, packaging material, wastepaper, residual waste
› Protection against entaglement and wrapping of strings, tapes, wires and foils
The economical alternative to shredding technology. The BRT HARTNER Bag Opener BO with feed hopper
› Loosened up and evened out material supply to the sorting process
buffers, opens and empties the plastic bags and transfers the metered material to subsequent sorting and
› Low servicing and maintenance requirements
treatment plants. The hopper is fed batchwise by a front loader or by grab crane. Upon request, the BRT
› Overcharge protection and automatic switch-off in case of blockages caused by bulky and disruptive material
HARTNER Bag Opener BO can also be provided as a basic version without feed hopper.
› Large infeed hopper for feeding by front-end loader or by gripper

BO 13 BO 17 BO 23

Working width approx. 1.300 mm approx. 1.700 mm approx. 2.300 mm


Hopper length up to 14.000 mm up to 14.000 mm up to 14.000 mm
Hopper volume min. 9 m³ 12 m³ 16 m³
Hopper volume max. 30 m³ 40 m³ 55 m³
Power requirement 17 – 36 kW 22 – 43 kW 28 – 52 kW
Total weight 10 – 16 t 12 – 18 t 16 – 22 t
Opening rate min. 95 % 95 % 95 %
Max. throughput with lightweight packaging 10 t/h 13 t/h 20 t/h
High bunker capacities Effective opening system Robust moving floor technology Max. throughput with MSW / household waste 24 t/h 36 t/h 50 t/h

4 5
BOS
BRT HARTNER BOS

BAG OPENER BOS 12 | BOS 18 | BOS 24

BAG OPENER FOR SMALL PLASTIC BAGS › Virtually 100% opening and emptying even of small
waste bags


Ready-to-connect design
Low servicing and maintenance requirements
› Low acquisition costs › Space-saving
› Extremely robust and resistant to wear › Silent machine operating
The BRT HARTNER BOS Bag Opener opens and empties even small plastic waste bags and pouches. It was
› Loosened up and evened out material supply into the › Slow runner
developed especially for the application in biowaste. After passing the BOS Bag Opener the foils are big
sorting process › Especially efficient with an upstream Feed and
enough to be screened out of the material stream. The feeding can be carried out directly into the chute of the
Metering Hopper
machine.

BOS 12 BOS 18 BOS 24

Working width 1.200 mm 1.800 mm 2.400 mm


Chute volume 2,5 m³ 3,6 m³ 4,4 m³
Outer length 2.700 mm 3.300 mm 3.900 mm
Outer width 2.200 mm 2.200 mm 2.200 mm
Power requirement 37 kW 45 kW 55 kW
Total weight 6t 8t 10 t
Opening rate min. 95 % 95 % 95 %
Max. throughput 30 m³/h 45 m³/h 60 m³/h
Drum with special carriers Adjustable counter combs Sievable Max. throughput at 800 kg/m³ 24 t/h 36 t/h 48 t/h

6 7
BB
BRT HARTNER BB

BALE BREAKER BB

BALE BREAKER ›

Suitable for PET-bottles, residual waste, plastic containers, waste paper, sorting residues, etc.
Efficient opening of bales and loosening up of material
› Even and continuous material discharge
› Infinitely adjustable throughput rate
The BRT HARTNER BB Bale Breaker serves for unraveling and loosening of press bales consisting of PET-bottles,
› Large feed hopper for long feeding intervals
waste paper, residual waste, plastics and numerous other recyclable materials. The Bale Breaker does not shred
› Ready-to connect unit with drives and electrical control system
or crush the material, but loosens it up for effective subsequent processing.
› Freely selectable positioning of the lateral plug-in walls
A dynamic hold-down device ensures excellent handling of impurities and disruptive material. The bunker walls
of the BRT HARTNER BB are designed as removable plug-in walls. This allows for individual wall elements to
be removed or added. Upon request, the machine can also be delivered with a closed bunker in order to enable
feeding of loose material by wheel loader as well as the feeding of bales.
BB 15

Working width 1.780 mm


Total height 2.500 mm
Hopper length min. 6.000 mm
Total length min. 8.400 mm
Extension in steps of 2.000 mm
Total length max. 14.400 mm
Power requirement 11,5 - 22 kW
Weight from 11,5 t
Bale-breaking unit Breaking without shredding Plug-in side walls Throughput up to 10 t / h

8 9
D
BRT HARTNER D

FEED AND METERING HOPPER D 17 | D 23

FEED AND METERING HOPPER


BRT HARTNER D Dosing Hoppers are designed for continuous and even feeding of the most different materials › For waste paper, household waste, commercial and mixed construction waste, RDF, biowaste, etc.
and are equipped with an electrical volume flow regulation, a frequency-controlled dosing unit and a moving › Loosened up and even material feeding to sorting and recovery units
floor conveyor. › Access to the bunker via maintenance door with safety switch
Feed and Metering Hoppers are preferably used for feeding of sorting and treatment plants with waste paper, › Entanglement protection and self-cleaning effect of the dosing drum against strings, long foils,
packaging waste, household waste, commercial and mixed construction waste, glass, refuse derived fuel,
cords and wires
metals and electric waste.
› Large feed hopper for long feeding intervals
A wheel loader can, for example, be used to load the dosing bunker.
› Low maintenance and servicing requirements
The bunker is available in different sizes in order to adapt to the task intervals that are specific to the operational
requirements. The moving floor conveyor transports the material to the integrated dosing unit. There, the › Efficiency boost of as much as 20% compared to common feeding methods
material is loosened up and presented to downstream sorting processes as an even and continuous material › Ready for operation construction including drives and electrical control system
stream.
Optical sensors control the material height on the discharge belt. The rotational speed of the dosing unit and the D 17 D 23
velocity of the moving floor are adjusted accordingly.
Working width 1.700 mm 2.300 mm
Number of conveyor slats 12 pieces 16 pieces
Fill level 1.900 mm 1.900 mm
Total height 2.500 mm 2.500 mm
Extension in steps of 2.000 mm 2.000 mm
Total length max. 17.900 mm 17.900 mm
Volume 14 - 47 m³ 19 - 64 m³
Power requirement 11 - 33 kW 11 - 33 kW
Speed-controlled dosing unit Automatic volume flow control Heavy moving floor Weight from 10 t from 11 t

10 11
MF
BRT HARTNER MF

MOVING FLOOR CONVEYOR MF 17 | MF 23 | MF 29

MOVING FLOOR CONVEYER


The BRT HARTNER MF Moving Floor Conveyors can be manufactured in virtually every length and width in › Transport of all kinds of material, no matter if featherweight, heavyweight, wet and sticky or highly abrasive“
transportable units. The combination of different units allows for any size of the bunker surfaces. › Modular design for any required size
› Conveying speed infinitely adjustable
Each BRT HARTNER MF Moving Floor consists of push-boards groups which can be moved independently from › Easy integration into existing material bunkers
each other. For transporting of material, all groups are moved in the requested conveying direction which also
› Also available as driveable heavy-duty design for direct feeding by truck
moves the material. In the following step, the groups are individually drawn backwards. The material is held
› Moving floor without rotating parts, therefore no danger of entangling
back on the push-boards that are standing still. Reversing the conveying direction achieves optimal bunker
› High carrying capacity, safe against impact load
feeding and utilization of the hopper volume. Additional equipment such as sidewalls, completely closed hoppers
or metering and discharging devices are available upon request. › With metering and discharge devices upon request

MF 17 MF 23 MF 29

Working width 1.700 mm 2.300 mm 2.900 mm


Number of push boards 12 pieces 16 pieces 20 pieces
Height Moving Floor approx. 400 mm approx .400 mm approx. 400 mm
Fill level max. 1.800 mm 2.400 mm 3.000 mm
Moving Floor length min. 6.500 mm 6.500 mm 6.500 mm
Total length min. 8.000 mm 8.000 mm 8.000 mm
Extension in steps of 2.000 mm 2.000 mm 2.000 mm
Power requirement 4 - 22 kW 4 - 22 kW 4 - 22 kW
Material discharge unit Bunker volume freely selectable Driveable design for feeding by truck Weight from 5 t from 6 t from 7 t

12 13
DC
BRT HARTNER DC

DECOMPACTOR DC 14/2 | DC 18/2 | DC 18/3

DECOMPACTOR
DC Feed Hoppers with Decompactor are used in mechanical and biological waste treatment facilities. They
are especially suitable for the intake, buffering and dosing of rotting material, digestates and organic waste.

The system consists of a sturdy feed hopper with a drag chain conveyor and a decompaction unit with two
or three rollers. The rollers loosen up the material and prepare it for even transfer to subsequent plant
components.

DC Feed Hoppers with Decompaction Unit consist of a heavy, sturdy and torsion-resistant sheet steel and
sectional steel construction. They are adjusted to the requirements of the input material. It is possible to equip
the machine with a belt conveyor instead of a drag chain conveyor.

DC 14 / 2 DC 18 / 2 DC 18 / 3

Working width 1.400 mm 1.800 mm 1.800 mm


Centre distance 7.250 / 10.000 / 12.750 mm 7.250 / 10.000 / 12.750 mm 7.250 / 10.000 / 12.750 mm
Inclination 0° 0° 0°
Decompactor shafts 2 pieces 2 pieces 3 pieces
Volume hopper 10 – 20 m³ 13 – 25 m³ 20 – 36 m³
Throughput up to 200 m³/h up to 200 m³/h up to 200 m³/h
Power scraping chain up to 1,1 kW up to 1,1 kW up to 1,1 kW
Power decompactor shafts 2 x 7,5 – 15 kW 2 or 3, x 7,5 – 15 kW 3 x 7,5 – 15 kW
Loosening of compost Decompaction unit Bunker with scraper chain conveyor

14 15
DM
BRT HARTNER DM

DIGESTATE MIXER DM 12 | DM 20

DIGESTATE MIXER
The BRT HARTNER DM Digestate Mixer is a machine used for the optimal production of mixes from digestate,
sewage sludge and the like on the one hand and structuring materials such as green waste, raw compost and
screen overflow on the other. The system of mixing the substrates with the aid of mixing rollers in the material
flow effectively prevents compaction or kneading effects and loosens up the substrate.

This is a great benefit for aerobic post-treatment of the substrate. The BRT HARTNER DM furthermore excels
with its high throughput at great resistance against impurities, which allows for its optimal integration into the
automated material flow of a system as well as into a downstream batch system.

DM 12 DM 20

Useful length approx. 6.400 mm approx. 11.900 mm


Useful width approx. 1.200 mm approx. 2.000 mm
Filling height approx. 1.200 mm approx. 1.700 mm
Filling volume approx. 10 m³ approx. 40 m³
Feeding length approx. 1.500 mm approx. 6.800 mm
Discharge width approx. 1.200 mm approx. 2.000 mm
Diameter mixing roller approx. 750 mm approx. 1.200 mm
Diameter of mixing/discharge rollers approx. 610 mm approx. 610 mm
Design for feeding by wheel loader Feeding with conveyor belt Decompaction and mixing unit Throughput 36 – 180 m3/h 80 – 250 m³/h

16 17
DCD
BRT HARTNER DCD

DIGESTATE CONDITIONER DCD 20 / 125 | DCD 20 / 245

DIGESTATE CONDITIONER
DCD Digestate Conditioner. For perfect treatment of digestate mixtures before the aerobic treatment and
for thermal drying of the material, the input substrates are mixed, homogenized and then loosened up. The
pressure ventilation of the material with pre-heated air, optionally also available with circulation air and active
floor heating of the closed machine, is the basis for an optimized ammoniac and water output through the
exhaust air which is processed by the exhaust air treatment system.

DCD 20 / 125 DCD 20 / 245

Useful length approx. 12.500 mm approx. 24.500 mm


Filling volume approx. 30 m³ approx. 60 m³
Useful width approx. 2.000 mm approx. 2.000 mm
Filling height approx. 1.200 mm approx. 1.200 mm
Throughput 10 - 22 m³/h 10 - 22 m³/h

Rotor with swivel unit Floor heating for water output Ventilation with pre-heated air Treatment time 1,25 - 3 hours 2,5 - 6 hours

18 19
BS
BRT HARTNER BS

BALLISTIC SEPARATOR BS 45 | BS 60 | BS 90 | BS 120

BALLISTIC SEPARATOR
The BRT HARTNER BSH is a Ballistic Separator for packaging and household waste (single piece weight: The BRT HARTNER BSV is designed for heavy applications with commercial waste and mixed construction waste
< 10 kg). The paddles and sieve meshes are made of unalloyed construction steel. (single piece weight: < 30 kg). The paddles and sieve screens consist of wear-resistant steel. The lateral sheets at the
paddles are additionally reinforced. Furthermore, the entire machine frame and the shafts are adapted to the increased
Der BRT HARTNER BSW is a medium-heavy machine for household and commercial waste (single piece requirements. All eccentric bearings are doubled. As opposed to the BSH and BSW versions, both shafts of the BSV
weight: < 20 kg). The reinforced paddles and sieve meshes are made of wear resistant steel. This ensures a are driven by an electric gear motor with 22 kW drive power.
long service life even with rough applications.

BS 45 BS 60 BS 90 BS 120

Useful width 2.070 mm 2.770 mm 4.140 mm 5.540 mm


Paddle length 6.300 mm 6.300 mm 6.300 mm 6.300 mm
Drive power 11 kW* 11 kW * 22 kW 22 kW
Throughput* 45 - 60 m³/h 60 - 90 m³/h 90 - 120 m³/h 120 - 200 m³/h
Sieve area 13 m² 17,4 m² 26 m² 34,9 m²
Paddle no. 6 8 12 16
Height - machine frame 1.500 mm 1.500 mm 1.500 mm 1.500 mm
Four different working widths Optional tarp cover Straight shaft with eccentric bearing
Length - machine frame 7.100 mm 7.100 mm 7.100 mm 7.100 mm

*drive power of the BSV version 22 kW

20 21
BPS
BRT HARTNER BPS

PAPERSORTER BPS 12 | BPS 14 | BPS 16 | BPS 20 | BPS 30 | BPS 45

PAPERSORTER
The BRT HARTNER BPS is suitable within the range of the waste paper assortment both for the separation › Sturdy machine-design for durable application › Paddle width 338 mm
from paper and cardboard boxes and for the finesorting of the problematic disturbing of portions in the waste › Shaft with patented eccentric bearings › 6 / 8 / 12 / 16 / 24 paddles
paper, here particularly also for the improvement of the deinking quality. › Robust changeable bearings › Throughput from 6 t/h to 45 t/h
› Patented adjustable screen holes › Easy to maintain
› Many types for each purpose › For fine and coarse screening
› Sieve-area from 10.9 m2 to 43.6 m2 › High housing

BPS 12 BPS 14 BPS 16 BPS 20 BPS 22 BPS 30 BPS 45

Model 1 Deck 1 Deck 1 Deck 2 Deck 2 Deck 2 Deck 3 Deck


Paddle width 338 mm 338 mm 338 mm 338 mm 338 mm 338 mm 338 mm
Useful width 2.070 mm 2.070 mm 2.770 mm 2.070 mm 2.070 mm 2.770 mm 2.770 mm
Paddle length 5.300 mm 6.300 mm 6.300 mm 2x 4.300 mm 2x 5.300 mm 2x 5.300 mm 3x 5.300 mm
Outlet opening 258 mm 258 mm 258 mm 258 mm 258 mm 258 mm 258 mm
Drive power 11 kW 11 kW 11 kW 22 kW 22 kW 22 kW 33 kW
Throughput 10-12 t/h 12-14 t/h 14-16 t/h 18-20 t/h 20-22 t/h 25-30 t/h 35-45 t/h
With up to three decks Separation of cardboard Separation of fines and impurities
Sieve area 10,9 m² 13 m² 17,3 m² 17,6 m² 21,8 m² 29,1 m² 43,6 m²
Paddle no. 6 6 8 12 12 16 24

22 23
SD
BRT HARTNER SD

DRUM SCREEN SD 21 | SD 25 | SD 30

DRUM SCREEN
SD Screen Drums are used to screen commercial waste, household waste and other types of material. It
enables screening in several steps with different sized openings. The typical screen cut size is from 60 to 300
mm. The SD Screen Drums thoroughly turn and throw the material so that ideal separation rates are reached.
Different entanglement protection features make this 3D screen very maintenance and cleaning friendly.
The machine is available in three different diameters and a total of seven different lengths. The SD Screen
Drum is extremely sturdy. The bearing races, radial wheels, screen sheets and other wear parts have a very
long lifespan.

SD 21 SD 25 SD 30

Drum diameter 2.100 mm 2.450 mm 2.950 mm

Length of sieving surface 6.000 mm 7.000 - 12.000 mm 8.000 - 14.000 mm


Total length of drum body 8.000 mm 9.000 - 14.000 mm 10.000 - 16.000 mm
Total sieving area 40 m² 54 m² - 92 m² 74 m² - 130 m²
Thickness of screen plates 8 or 10 mm 8 or 10 mm 8 or 10 mm
Drum inclination 4° 4° 4°
Number of races 4 8 or 12 8 or 12
Drive 1 x 11 kW 2 x 7,5 kW or 2 x 15 kW 2 x 7,5 kW or 2 x 15 kW
Screen cut (size) freely selectable Entanglement protection with flat bars Entanglement protection with tube sleeves Total weight 15 t 22 - 28 t 28 - 36 t

24 25
ST
BRT HARTNER ST

STATIONARY TROMMEL SCREEN ST 20 | ST 22

STATIONARY TROMMEL SCREEN


The ST Stationary Trommel Screens are a modification of the TERRA SELECT Mobile Drum Screens. These
screens are designed for stationary plants and therefore electrically driven and firmly mounted onto a sub-
structure. The application range is very versatile and includes compost, all kinds of soil or wood as well as
household waste or metal. The screening of fine particles up to 80 mm grit size is the priority with this machine.
If requested, the drum screen can also be equipped with entanglement protection or a cleaning device with a
scraper. A housing made of sheet steel completes the scope of supply.

ST 20 ST 22 ST 25

Drum diameter 2.000 mm 2.200 mm 2.500 mm


Length of sieving surface up to 8.000 mm up to 8.000 mm up to 8.000 mm
Total length of drum body up to 9.000 mm up to 9.000 mm up to 9.000 mm
Total sieving area up to 50 m² up to 55 m² 63 m²
Thickness of screen plates 6 or 8 mm
Internal screw 180 mm high and 6 mm thick
Drum inclination 0°
Number of radial wheels 4 4 4
Screw conveyor internal Screening holes up to 80 mm Cleaning brush with scraper Drive 11 kW 15 kW 22 kW

26 27
SC
BRT HARTNER SC

COARSE SCREEN SC 40 | SC 60 | SC 90

COARSE SCREEN
The SC Rotor screens provide a reliable and durable solution for the sorting of waste paper and cardboard that › Efficient separation of cardboard and › Easily exchangeable screens discs
is impervious to impurities. The input material is fed from the front. The cardboard “swims” over the screen. The cardboard packagings from mixed paper › Dynamic adjustment of the screen cut
mixed paper is pulled down through the rotor screen discs. › Reasonable price, long service life › Easy to clean
› Impervious to disruptive material › Frequency controlled speed adjustment (optional)
› Loosened up and even material feeding to subsequent sorting › Inclination adjustment available as an option

SC 40 SC 60 SC 90

Working width 1.800 mm 1.800 mm 1.800 mm


Length approx. 4.000 mm approx. 6.000 mm approx. 9.000 mm
Screen surface approx. 6,7 m² approx. 9,8 m² approx. 14,7 m²
Weight approx. 2,6 t approx. 5,2 t approx. 7,8 t
Screen cut > A4 > A4 > A4
Amount of rotor elements 10 15 22
Amount of discs per element 8 8 8
Power requirement 3 kW 6 kW 9 kW

Throughput capacity up to 30 t/h Screening of cardboard Adjustable distances of the rotor elements Throughput up to 10 t/h up to 20 t/h up to 30 t/h

28 29
SF
BRT HARTNER SF

FINE SCREEN SF 40 | SF 60 | SF 90

FINE SCREEN
The SF Fine Screen is used for post-treatment of the mixed paper fraction. Producing a loose and even › Optimal subsequent treatment of mixed paper fraction › Loosened up and even material feeding to post-sorting
material stream, the fine screen prepares the material in an optimal way for manual, mechanical or optical › Efficient screening of disruptive materials and small parts › Easy to clean
sorting. The oversize grain consists mainly of valuable deinking material. › Dynamic adjustment of the screen cut › Frequency controlled speed adjustment (optional)
› Reasonable price, long service life › Easy integration into existing sorting plants

SF 40 SF 60 SF 90

Working width 1.800 mm 1.800 mm 1.800 mm


Length approx. 4.000 mm approx. 6.000 mm approx. 9.000 mm
Screen surface approx. 6,7 m² approx. 9,8 m² approx. 14,7 m²
Weight approx. 2,4 t approx. 5,0 t approx. 7,5 t
Screen cut > 100 mm > 100 mm > 100 mm
Cascade - 500 mm 500 mm
Amount of rotor elements 24 36 54
Amount of discs per element 15 - 19 15 - 19 15 - 19
Power requirement 2,2 kW 4,4 kW 6,6 kW
Throughput waste paper and cardboard up to 7 t/h up to 12 t/h up to 18 t/h
Robust screen discs made of steel With up to three decks Separation of fines and impurities

30 31
BBS
BRT HARTNER BBS

WINDSICHTER BBS

WINDSICHTER
The BBS Air Belt Separator classifies the input material into a lightweight and a heavyweight fraction. Suitable The separator operates in recirculation mode. A second fan extracts the dust-laden air through a filter from the settling
input for an air sifting machine for best separation results and high throughputs is free-flowing, preconditioned chamber and transfers the cleaned air to the surroundings. The separated dust is supplied to the light material fraction.
material with a defined particle size.

The infeed material is evenly fed onto the acceleration belt. The input material passes a nozzle in free fall that › High recovery rate of light fraction
is located under the head of the acceleration belt. Very light components are blown out of the stream over the › Numerous adjustment parameters allow machine adaptation to
arch belt directly into the settling chamber. In the transfer area, very heavy parts fall down on a heavymaterial reach an optimal separation result with different materials
discharge belt. All other particles bounce against the arch belt and are also separated into light and heavy › Integrated filter unit
fractions by the radius and the adjustable inclination of the arch belt. In the settling chamber the light fraction is
separated from the air stream and discharged by the light material discharge belt.

BBS

Working width 1.600 mm

Throughput up to 160 m³/h


Length total 9.200 mm
Width total 2.400 mm
Height total 4.600 mm
Installed electrical power 43 kW
Arch belt 2,2 kW
Fan for nozzle 22,0 kW

Adjustable arch belt Settling chamber Recirculation mode with filters Fan for underpressure generation 15,0 kW

32 33
EWD
BRT HARTNER EWD

ELECTRIC WASTE DISMANTLER EWD 12 | EWD 18 | EWD 24

ELECTRIC WASTE DISMANTLER


Manual opening of plastic housings of used electrical household appliances is time-consuming and dangerous. › Suitable for household appliances: vacuum cleaners, › Low dust formation
Splitters and sharp edges, as well as the appliances’ contents may cause injuries. kitchen appliances, lawn mowers etc. › Space-saving
› Cracking of the plastic housings for removal of metal parts › Low noise level
The EWD Electric Waste Dismantler executes this work automatically, safely and fast. The plastic housings are › Turnkey design › Low energy consumption
coarsely broken. The inside parts remain largely intact and can be removed safely. They are freely accessible and › Metered material transfer to sorting › Economic purchase price
– as opposed to shredders – they are not destroyed. The crushed housings and metal parts are transported to
› No risk of injury for sorting staff › Slow runner
subsequent sorting in a continuous material flow.

EWD 12 EWD 18 EWD 24

Working width 1.200 mm 1.800 mm 2.400 mm


Chute volume 2 m³ 2 m³ 2 m³
Outer length 2.700 mm 3.300 mm 3.900 mm
Outer width 2.200 mm 2.200 mm 2.200 mm
Feeding height approx. 3.800 mm approx. 3.800 mm approx. 3.800 mm
Power requirement 11 kW 11 kW 15 kW
Total weight 6t 8t 10 t
Max. speed 18 rpm 18 rpm 18 rpm
Max. throughput 30 m³/h 45 m³/h 60 m³/h
Screwed-on special carriers Cracked plastic housings Manual post-sorting Max. throughput with electrical appliances 2 t/h 3 t/h 4 t/h

34 35
BD
BRT HARTNER BD

BALE DEWIRING BD

BALE DEWIRING
The BD Bale Dewiring machine automatically removes wire strappings from compressed bales. The bales are › Mechanic dewiring of press bales › Automatic adjustment to material density
fed to a sturdy steel plate conveyor. The cutting device takes hold of the wires, pulls them from the bale and cuts › Automatic opening and removing of wire strapping › High availability due to wear-resistant blades
them. Then the wires are coiled and discharged to the bottom. Employment of staff for manual bale wire cutting › Coiling and compacting of removed bale wires › Delivery complete with apron conveyor, all drives and
– which is a very dangerous task – is no longer necessary. It is recommended to operate the BD Bale Dewiring
› Wire cutting without danger of injury electric control system
in combination with the well-established BB Bale Breaker. The complete automation of material preparation by
› For bales consisting of plastics, foils, PET bottles, paper etc. › Compact material preparation system in combination
BRT HARTNER technology saves personnel, time and costs.
› Self-acting adaptation to bale size with BB Bale Breaker

BD

Working width 1.400 mm

Bale dimensions max. (W x H x L) 1.200 x 1.200 x 2.500 mm

Bale weight approx. 400 - 2.500 kg


Machine width 4.600 mm

Machine length 6.500 mm

Machine height 3.250 mm


Power requirement 15 kW

Wire cutting unit Steel plate bale conveyor Coiled wire Throughput up to 60 bales/h

36 37
PS / PD
BRT HARTNER PS / PD

PERFORATOR PS 06 | PS 12 | PS 14 | PD 06 | PD 12 | PD 14

PERFORATOR
Closed PET bottles or other plastic containers with a high density have to be perforated in order to be pressed. › Perforating rate > 95 % › Low investment costs
This is done with perforators. The PS / PD Perforators are available in three working lengths as single › Throughput up to 160 m³/h › Long service life
and double perforators. Knife bars made of special steel guarantee a long service life. The knives can be re- › Tools are resharpenable and exchangeable
› Applicable for bottles and containers from 0,5 l to 5 l
sharpened or simply changed. The sturdy machine design even allows for the use as a glass crusher. › Reduction of the material volume of approx. 30 %
› Low drive power
› Optionally available with electric control system
The PS / PD Perforators are installed in discharge chutes of manual sorting lines. The bunkers can be used
a lot more effectively as the bottles and containers are not only perforated but also reduced in volume. The
perforators can also be retrofitted into the infeed chute of a press.

For universal use, a complete, semi-mobile solution is provided. It consists of a perforator, a chute with frame
and a control and is set up above the infeed belt to presses or containers. The perforators can also be fed by PS 06 PS 12 PS 14 PD 06 PD 12 PD 14
wheel loader. The machine perforates and flattens the bottles and containers which facilitates transport on Working width 600 mm 1.200 mm 1.400 mm 600 mm 1.200 mm 1.400 mm
subsequent ascending conveyors. Length 1.050 mm 1.620 mm 1.820 mm 1.050 mm 1.620 mm 1.820 mm
Width 680 mm 680 mm 680 mm 1.360 mm 1.360 mm 1.360 mm
Height 360 mm 360 mm 360 mm 360 mm 360 mm 360 mm
Weight 300 kg 600 kg 700 kg 600 kg 1.200 kg 1.400 kg
Number of trommels 1 1 1 2 2 2
Number of knife bars 8 16 16 16 32 32
Power requirement 2 kW 4 kW 4 kW 4 kW 8 kW 8 kW
Speed 60 rpm 60 rpm 60 rpm 60 rpm 60 rpm 60 rpm
Single perforator Double perforator Double perforator with chute Throughput 40 m³/h 70 m³/h 80 m³/h 80 m³/h 140 m³/h 160 m³/h

38 39

You might also like