Scribd
Upload
1K views4 pages

Scanmatik 2 Pro

The Scanmatik 2 PRO is a professional multiband scanner for diagnosing electronic control systems in vehicles from various manufacturers. It supports the J2534 and RP1210 diagnostic standards and can be used with various diagnostic software and programs. New features include galvanic USB isolation, improved K-line and CAN bus protection, faster Bluetooth connection, and surge protection. It allows programming voltage supply and supports multiple data buses and peripheral units.

Uploaded by

info
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views4 pages

Scanmatik 2 Pro

The Scanmatik 2 PRO is a professional multiband scanner for diagnosing electronic control systems in vehicles from various manufacturers. It supports the J2534 and RP1210 diagnostic standards and can be used with various diagnostic software and programs. New features include galvanic USB isolation, improved K-line and CAN bus protection, faster Bluetooth connection, and surge protection. It allows programming voltage supply and supports multiple data buses and peripheral units.

Uploaded by

info
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

SCANMATIC 2 PRO

Scanmatik 2 PRO is a professional multiband scanner designed for diagnostics of electronic control systems
of American, European, Japanese and Russian vehicles. It can be used as a J2534 device with a large number
of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

New features of Scanmatik 2 PRO:

 Galvanic isolation of the USB port (with power);

 Redesigned protection of K-lines and CAN buses on a new element base;

 Increased speed of work via Bluetooth by about 20%;

 Pulsed power supplies of the company’s own design (no heating, wide input voltage range from
5 to 55V);

 Load-Dump power surge protection (when the generator is switched off on a running engine).

The widest support of J2534-1/2 standards:

 Supply of programming voltage (5-24V) to the OBD connector pins: 6, 8, 11, 12, 13, 14;
 AUX programming voltage output (via an additional cable).

For full support of peripheral units on GM (GDS2) and VAZ/Renault cars:

 An additional CAN bus on pins 12-13 running in 12H-13L or 12L-13H configuration.

Description
The device works with a personal computer, tablet or Smartphone. The software for Windows and Android
are included in the package. When installing the driver (included) works with third-party software made for
SAE J2534 and RP1210 standards. To connect to the adapter both USB and Bluetooth interfaces can be used
(built into the Scanmatik 2 PRO adapter). The kit includes the full current version of the program (all
currently available software modules): VAZ, GAZ, UAZ, Oka, ZAZ, Daewoo, Chevrolet, Ravon, Chery, BYD,
Geely, Great Wall, Lifan, Mitsubishi, Kia, Hyundai, Izh, KAMAZ, MAZ, PAZ, OBD2. It works with a large number
of diagnostic programs and flashers made for standard interfaces SAE J2534 and RP1210.

www.v-labelectronics.in | +91-9060629829 | [email protected]


SCANMATIC 2 PRO

SM2-PRO Adapter Specifications

 Interfaces for communication with PC (Tablet, Smartphone) - USB or Bluetooth;


 Power supply voltage: 5... 36V from the vehicle network or USB (galvanic isolation with power
supply);
 Current consumption, not more than 350mA;
 Pulsed power supplies of the company’s own design (no heating, wide input voltage range from
5 to 55V);
 Load-Dump power surge protection (when the generator is switched off on a running engine).
 Supported data buses:
o 13 x ISO-9141/ISO-14230 (K-LINE);
o 1 x J1850VPW;
o 1 x J1850PWM;
o 4 x CAN;
o 1 x Single Wire CAN.
 Built-in multiplexer for switching diagnostic lines;
 The widest support of J2534-1/2 standards;
 Programming voltage supply (5-24V) to the OBD2 connector pins: 6, 8, 11, 12, 13, 14;
 AUX programming voltage output (via an additional cable);
 Bluetooth range, not less than: 10m (Class 2);
 Adapter dimensions (L x W x H), not more than: 970×750×220mm;
 Weight of the device in the basic configuration, not more than: 1 kg.

Boot-Bench Connection cable

Adapter (boot/bench cable) for bench working with PCMFlash


together with Scanmatik 2 or Scanmatik 2 PRO and external
power supply (12V or 24V for trucks).

 Power connector is Jack 2.0 mm;


 Has a built-in short circuit protection;
 The maximum allowable current is up to 5 A;
 Automatic power management and Boot and CNF1
signals;

Works with ALL PCMFlash modules that require Bench work


and automatic power management, such as 53, 71, 77 and
others.
Ver. 2, short-circuit protection.
The wire coloring of the connection cable
Red — +12V
Blue-yellow — GPT1 (5v amplitude output)
Black — GND
Red-yellow — GPT2 (5v amplitude output)
Red-white — GPT1 -12b (buffer less, up to 12V)
Black-white — GPT2 -12b (buffer less, up to 12V)

www.v-labelectronics.in | +91-9060629829 | [email protected]


SCANMATIC 2 PRO

White — CAN H
Violet — Vpp
Green — CAN L
Blue — CNF1 510 Ohm
Yellow — K-Line
Grey — boot 1 Kohm
External power 12V (5, А mах) Jack

The correct pinouts to the adapter board:

www.v-labelectronics.in | +91-9060629829 | [email protected]


SCANMATIC 2 PRO

Additional features:
The adapter provides the ability to control the power supply manually. For this feature, it is required to make
a switch, see the photo below. Manual control is a better option than automatic control.

For advanced users: after completion it is possible to work on the bench with all packages originally
designed to work in the car, for example: 50, 36, etc.

NOTE: All Cables and Adapters will be charges extra.

www.v-labelectronics.in | +91-9060629829 | [email protected]

You might also like