Command Line Installation

User Guide
DISCLAIMER

The information contained herein is for informational purposes only and is subject to change without
notice. While every precaution has been taken in the preparation of this document, it may contain
technical inaccuracies, omissions, and typographical errors, and AMD is under no obligation to update
or otherwise correct this information. Advanced Micro Devices, Inc. makes no representations or
warranties with respect to the accuracy or completeness of the contents of this document, and
assumes no liability of any kind, including the implied warranties of non- infringement, merchantability
or fitness for particular purposes, with respect to the operation or use of AMD hardware, software or
other products described herein. No license, including implied or arising by estoppel, to any intellectual
property rights is granted by this document. Terms and limitations applicable to the purchase or use of
AMD’s products are as set forth in a signed agreement between the parties or in AMD's Standard
Terms and Conditions of Sale.

©2019 Advanced Micro Devices, Inc. All rights reserved. AMD, the AMD arrow, Radeon Pro, and
combinations thereof are trademarks of Advanced Micro Devices, Inc. in the United States and/or other
jurisdictions.
 Table of Contents
Supported Platforms...................................................................................................... 1
Operating System .............................................................................................................................. 1
Command Line Installation of Radeon™ Pro Software ................................................... 2
 SUPPORTED CONFIGURATIONS 1

Supported Platforms
Operating System
Command Line installation of Radeon™ Pro Software is compatible with the following 64-bit operating
systems:
• Microsoft Windows® 10
• Microsoft Windows® 7
• Microsoft Windows® Server 2019
• Microsoft Windows® Server 2016
 COMMAND LINE INSTALLATION 2

Command Line Installation of Radeon™ Pro

Software
Radeon™ Pro Software Command Line installation allows the user to run the driver install
process without any confirmation dialogs appearing. Following are the command line
instructions to install and uninstall Radeon™ Pro Software without user interface:

Command Description Example

“/Help” or “/?” Setup.exe utility shows a brief <build>\Setup.exe /Help

description of “-INSTALL” , Or
“-UNINSTALL” and “/Help” <build>\Setup.exe /?
command itself.

-INSTALL Command used to install packages, <build>\setup.exe -INSTALL

both driver and applications. No • Setup searches and installs
output to the screen. If USE path is install Driver and
application packages
not specified, Setup.exe searches for located in the default path
packages in the default path,
<build>\Setup.exe -INSTALL -
<Build>\Packages USE c:\package\driver

• Install packages located in

the folder
c:\package\driver will be
installed. Package
dependencies are enforced

-UNINSTALL ALL Command to uninstall all Installer <build>\Setup.exe –

UNINSTALL ALL
packages that are installed on
system. There is no option to specify • Executes uninstall of all
which packages to uninstall. packages in silent mode, no
output to the screen.
 COMMAND LINE INSTALLATION 3

Following are the instructions that will allow the users to perform various other functions
through command line:

Command Description Example

-INSTALL -boot Silent install with auto reboot <build>\setup.exe -INSTALL

-boot

-UNINSTALL ALL - Silent uninstall with auto reboot <build>\setup.exe -

boot UNINSTALL ALL -boot

-USE <Root Path Specify the path for installer to search for <build>\Setup.exe -INSTALL
of Packages> - OUTPUT screen -USE
packages to install.
-USE <Path/MSI “c:\my directory\packages\”

Installer filename>
(To install a specific installer package, the • Install is executed and
installer searches for
MSI package name needs to be entered the packages in the c:\my
command line.) directory\packages
folder. Double quotes are
required because the path
To install a specific installer package, the contains spaces. Package
dependencies are
MSI package name needs to be entered enforced. Output
into the command line. information for the install
is displayed in the DOS
console.
(Double quotes are needed if path contains
spaces)
<build>\Setup.exe -INSTALL
- OUTPUT screen -USE
c:\packages\driver\lh\lh.msi

• Install is executed and the

package lh.msi is installed.
Package dependencies
are enforced; if the
package is not supported
by the hardware it will not
be installed.

-OUTPUT screen Output to screen or a file. <build>\Setup.exe -INSTALL

-OUTPUT screen
 COMMAND LINE INSTALLATION 4

• Basic install information

outputs to the DOS
console

<build>\Setup.exe -INSTALL
-OUTPUT detail

• Detailed install
information outputs to
the DOS Console

-OUTPUT Output install/uninstall log progress to a <build>\Setup.exe -INSTALL

<Filename> -OUTPUT C:\logfile.txt
file.
-OUTPUT
<path\Filename> • Detailed installation
progress is written to file
(Double quotes are needed if there are with the name of
spaces in <filename> or <path\filename>) logfile.txt in C:\.

<build>\Setup.exe -
UNINSTALL -OUTPUT
C:\logfile.txt

• Detailed uninstall
information is written to
the file logfile.txt in C:\.

-LOG <Filename> <build>\Setup.exe -INSTALL

Double quotes are needed if there are
-LOG -LOG
spaces in <filename> or <path\filename>. “c:\Setup\Install_Result.log”
<Path\Filename>
• Outputs the install result
If only <Filename> is specified, the log file is
information to
created in the default location, <Program
Install_Result.log file in
Files>\AMD\CIM\Reports\. If no path is
c:\Setup\.
specified after –LOG, “Setup.log” will be
created in the default location, <Program
Files>\AMD\CIM\Reports\.
 COMMAND LINE INSTALLATION 5

The log file follows the below format:

[ResponseResult]
ResultCode = <overall result code>

[Details]
Package Name = <name of package>
Package PID = <unique identifier for
package >
Version = <version of package>
ErrorCode = <result code for the package>

The ResultCode is interpreted as follows:

ResultCode Explanation

PASS 0 All packages

installed
correctly. There
may be
packages
requiring
reboot.

FAIL 1 One or more

packages failed
to install.

FAIL 2 One or more

packages failed
to install and
system needs
to reboot

The ErrorCode is interpreted as follows:

 COMMAND LINE INSTALLATION 6

ErrorCode Explanation

PASS 0 Package installed

correctly

FAIL 1 Failed to install

package

FAIL 2 Failed to install

package and
system need to
reboot

PASS 3 Package installed

correctly, and
system need to
reboot

To specify configuration file for Setup.exe <build>\Setup.exe -USE

-USE
to use. c:\packages -CFG
<Build>\Packages c:\Myconfig.cfg -INSTALL -
-USE <Root Path
OUTPUT SCREEN
of Packages> -CFG Double quotes are needed if there are
<path to Config spaces in <path to Config file>.
file> • Executes install using
customized configuration
file from the path
c:\Myconfig.cfg.
Output of the install
sequence is sent to the
DOS console.

Launch Installer User Interface with full <build>\Setup.exe -UI

-UI
interaction. Use –UI to have command line Setup.exe launches GUI
interface, Setup.exe, launch graphical user (RadeonInstaller.exe)
interface, RadeonInstaller.exe.
 SUPPORTED PLATFOrMS 7

Command Line Installation

©2019 Advanced Micro Devices, Inc.

All rights reserved.