Scribd
Upload
386 views1 page

Motor Standards Applicable - Part3

The document lists 25 standards from the IEC 60034 series relating to rotating electrical machines. The standards cover topics such as noise limits, thermal protection, starting performance, mechanical vibration, impulse voltage withstand, effects of unbalanced voltages, selection of energy-efficient motors, and measurement of stator end winding vibration.

Uploaded by

Ranjan Muthanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
386 views1 page

Motor Standards Applicable - Part3

The document lists 25 standards from the IEC 60034 series relating to rotating electrical machines. The standards cover topics such as noise limits, thermal protection, starting performance, mechanical vibration, impulse voltage withstand, effects of unbalanced voltages, selection of energy-efficient motors, and measurement of stator end winding vibration.

Uploaded by

Ranjan Muthanna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

3/25/2019

IEC 60034 - Contd IEC 60034 - Contd


Sl Sl
Standard Description Standard Description
No No
7 IEC 60034 - 9 Noise limits 14 IEC 60034 - 20 Control motors – stepper motors

8 IEC 60034 -11 Built in thermal protection 15 IEC 60034 - 21 Definite purpose cage induction motors
Starting performance of single-speed three
9 IEC 60034 -12 16 IEC 60034 - 23 Repair, overhaul and reclamation
phase cage induction motors
Mechanical vibration of machines with centre Online detection and diagnosis of potential
10 IEC 60034 -14 failures at the active parts of rotating electrical
height 56 mm and higher 17 IEC 60034 - 24
machines and of bearing currents - Application
Impulse voltage withstand levels of rotating
11 IEC 60034 -15 guide
a.c. machines with form-wound stator coils
A.C. Machines when used in power drive
Cage induction motors when fed from 18 IEC 60034 - 25
12 IEC 60034 -17 systems - Application guide
converters – Application guide
Effects of unbalanced voltages on the
13 IEC 60034 -18 Functional evaluation of insulating systems 19 IEC 60034 - 26
performance of three-phase induction motors

IEC 60034 - Contd IEC 60034 - Contd


Sl Sl
Standard Description Standard Description
No No
Off-line partial discharge measurements on the Selection of energy-efficient motors including
20 IEC 60034 - 27 stator winding insulation of rotating electrical 24 IEC 60034 - 31 variable speed applications - Application
machines guide
Test methods for determining quantities of Measurement of stator end winding vibration
25 IEC 60034 - 32
21 IEC 60034 - 28 equivalent circuit diagrams for three-phase of form wound windings
low-voltage cage induction motors
Equivalent loading and superposition
22 IEC 60034 - 29 techniques - Indirect testing to determine
temperature rise
Efficiency classes of single-speed, three-phase,
23 IEC 60034 - 30
cage-induction motors (IE-code)

You might also like