Pipe Support STD

NATIONAL IRANIAN OIL ENGINEERING
AND CONSTRUCTION COMPANY

ESFAHAN REFINERY UPGRADING PROJECT
STANDARD DRAIWNG FOR PIPING SUPPORT
AO IJUN. 12, 2008 ISSUED roR APPROVAL .,.. .... - 1......,m~ l~cljJlolld
REV. DATE OESCRIPTION 1 PREP. 1 CHK. APPR./ AUTH •
•
1 1
NATIONAL IRANIAN OIL REFINING & DISTRJBUTION COMPANY
NATIONAL IRANIAN OIL ENGINEERING
AND CONSTRUCTION COMPANY ~
N.1.0.E.C.
CONSULTANT: CONTRACTOR:
Technip .a& ,~. . . . . .
.......-DAEUM Al úljqau
TECHNIP ITALY S.p.A.
PROJECT TITLE: ESFAHAN REFINERY UPGRADING PROJECT
DRAWING TITLE:
STANDARD DRAWING FOR

,. PIPING SUPPORT
PREP.: H.W.KIM b 1 CHK.: W.L.SHIM ~ 1 APPR: J.M.OH
7 ,h.,..,,¡,
7
DWG. No.: 3607 /32-74/ED-Pl/SD-5100-A3 SC: NONE
DOCUMENT No. SIZE: A4
PLAN/PRJ/SUB UNIT CODE PHASE DISCIP. DOC. TYPE SERIAL NO. REV. SHEET NO.
3607 /32 74 ED PI SD 5100 AO 1OF320
STANDARD PIPE SUPPORT, 3607 /32-SD-5100
STANDARD DRAWING LIST ST-A4-0000 (1 of 7)
NIOEC STANDARD
P/S STO.
DWG. NO. DWG. TITLE REV. SUPPORT NO.
No. (SD-5006)
ST-A4-0000 STANDARD DRAWING LIST (1/7) AO -
ST-A4-0000 STANDARD DRAWING LIST (217) AO -
ST-A4-0001 GENERAL NOTES AO -
ST-A4-0002 ALLOWABLE LOAD TABLE (RESTING TYPE SHOE) AO -
ST-A4-0003 ALLOWABLE LOAD TABLE (ANCHOR TYPE SHOE) AO -
ST-A4-0004 ALLOWABLE LOAD TABLE (TRUNNION) (117) AO -
ST-A4-0004 ALLOWABLE LOAD TABLE (TRUNNION) (4/7) AO -
ST-A4-0004 ALLOWABLE LOAD TABLE (TRUNNION) (5/7) AO -
ST-A4-0004H ALLOWABLE LOAD TABLE FOR HIGH PRESSURE PIPING (TRUNNION) (1/3) AO -
ST-A4-0005 ALLOWABLE LOAD TABLE (VESSEL CLIP SUPPORT) (1/4) AO -
ST-A4-0006 LOCAL SUPPORT FOUNDATION LOAD TABLE (1/2) AO -
ST-A4-0006 LOCAL SUPPORT FOUNDATION LOAD TABLE (2/2) AO -
ST-A4-1000 ADB ADIABATIC BLOCK (FOR COLO PIPING TRUNNION) AO -
ST-A4-1001 UBT U-BOLT AO 801
ST-A4-1002 UBTC U-BOLT (FOR COLO INSULATED PIPE) AO -
ST-A4-1003 UBD U-SANO AO 802
ST-A4-1004 UBDC U-SANO (FOR COLO INSULATED PIPE) AO -
ST-A4-1005 RLS RISER LUG (FOR SPRING SUP'T) AO -
ST-A4-1006 CLS CLEVIS AO -
ST-A4-1007 LPT LUG PLATE AO -
ST-A4-1008 EL ELBOW LUG AO -
ST-A4-1009 RLH RISER LUG (FOR HANGER SUP'T) AO -
ST-A4-1010 EBT EYE BOLT AO -
ST-A4-1011 CLB CLEVIS BOLT AO -
ST-A4-1012 STB STRAIGHT BOLT AO -
ST-A4-1013 TBL TURN BUCKLE AO -
ST-A4-1014 PC PIPE CLAMP (FOR BARE PIPE) AO -
ST-A4-1015 PCH PIPE CLAMP (FOR HOT INSULATED PIPE) AO -
ST-A4-1016 PCC PIPE CLAMP (FOR COLO INSULATED PIPE) AO -
ST-A4-1017 RC RISER PIPE CLAMP (FOR LIGHT WEIGHT) AO -
ST-A4-1018 RCH RISER PIPE CLAMP (FOR HEAW WEIGHT) AO -
ST-A4-1019 CRD CRADLE (FOR COLO INSULATED PIPE) AO -
ST-A4-1020 URB URETHANE BLOCK (FOR COLO INS.) AO -
ST-A4-1021 URBV URETHANE BLOCK (FOR SUPPORT CLIP) AO -
ST-A4-1022 - URETHANE FOAM PROPERTY TABLE AO -
ST-A4-1023 ADS ADJUST STANCHION (ONE BOLT TYPE) (1OF4) AO -
ST-A4-1023 ADS ADJUST STANCHION ( FOUR BOLT TYPE ) (2 OF 4) AO -
ST-A4-1023 ADS ADJUST STANCHION ( ONE BOLT TYPE ) (3 OF 4) AO -
NIOEC STANDARD
P/S STO.
No. (SD-5006)
ST-A4-1023 ADS ADJUST STANCHION ( FOUR BOLT TYPE WITH URETHANE FOAM) (4 OF 4) AO -
ST-A4-1024 FBD FIXED BAND (FOR VIBRATION UNE) AO -
ST-A4-1025 FBDS FIXED BAND (FOR VIBRATION UNE) AO -
ST-A4-1026 ERO EYE ROD AO -
ST-A4-1027 PW PLAIN WASHER AO -
ST-A4-1028 ASW ADJUSTABLE SPRING WEDGE (FOR VIBRATION UNE) AO -
ST-A4-1030 BC BEAMCLAMP AO -
ST-A4-1031 BPLA BASE PLATE AND EXPANSION ANCHOR BOL T (ANCHOR TYPE) (1/2) AO S67
ST-A4-1031 BPLA BASE PLATE AND EXPANSION ANCHOR BOLT (ANCHOR TYPE) (2/2) AO S67
ST-A4-1032 BPLR BASE PLATE AND EXPANSION ANCHOR BOLT (RESTING TYPE) (1/2) AO S67
ST-A4-1032 BPLR BASE PLA TE AND EXPANSION ANCHOR BOLT (RESTING TYPE) (2/2) AO S67
ST-A4-1033 BPLS BASE PLATE AND EXPANSION ANCHOR BOLT (ADJUST TYPE) (1/2) AO S67
ST-A4-1033 BPLS BASE PLA TE AND EXPANSION ANCHOR BOLT (ADJUST TYPE) (2/2) AO S67
ST-A4-1101 S-1 SHOE (FOR HOT INSULATED PIPE; SUDE TYPE) (1/2) AO S06, S07
ST-A4-1101 S-1 SHOE (FOR HOT INSULATED PIPE; SUDE TYPE) (2/2) AO S06, SO?
ST-A4-1101H HHS-1 SHOE FOR HIGH PRESSURE PIPING (FOR HOT INSULATED PIPE; SUDE TYPE) AO -
ST-A4-1104 S-4 CRADLE (FOR COLO INSULATED PIPE; RESTING TYPE) AO -
ST-A4-1105 S-5 SHOE (FOR HEAT TREATED PIPE; SUDE TYPE) AO -
ST-A4-1105H HHS-5 SHOE FOR HIGH PRESSURE PIPING (FOR HEAT TREATED PIPE; SUDE TYPE) AO -
ST-A4-1107 S-6 FOR BARE AND SLOPE UNE AO S06, SO?
ST-A4-1111 AF-31 ANCHOR (TRUNNION TYPE ON F/D) AO S33, S35
ST-A4-1111H HAF-31 ANCHOR FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON F/O) AO -
ST-A4-1112 AF-32 TRUNNION TYPE FOR ALLOY AND HEAT TREATED PIPE AO S34, S36
ST-A4-1113 AF-41 ANCHOR (FOR COLO INSULATED PIPE; TRUNNION TYPE ON F/D) AO -
ST-A4-1115 AF-51 ANCHOR (FOR 2" & SMALLER PIPE; U-BOLT TYPE ON F/D) AO S59
ST-A4-1121 AS-1 ANCHOR (FOR HOT INSULATEO PIPE; SHOE TYPE) AO S16, S17
ST-A4-1121H HAS-1 ANCHOR FOR HIGH PRESSURE PIPING (FOR HOT INSULATED PIPE; SHOE TYPE) AO -
ST-A4-1123 AS-3 ANCHOR (FOR BARE & SLOP UNE) AO 316, S17
ST-A4-1124 AS-4 ANCHOR (FOR COLO INSULATED PIPE; URETHANE BLOCK TYPE) AO -
ST-A4-1126 AS-6 ANCHOR (FOR C.S BARE PIPE) AO -
ST-A4-1127 AS-7 ANCHOR (FOR S.S BARE PIPE) AO -
ST-A4-1128 AS-8 ANCHOR (FOR 4" & SMALLER BARE PIPE; U-BOLT TYPE) AO S01
ST-A4-1129 AS-9 ANCHOR (FOR BARE PIPE; U-BAND TYPE) AO S03
ST-A4-1130 AS-10 ANCHOR (FOR COLO INSULATED PIPE; U-SANO TYPE) AO -
ST-A4-1131 AS-31 ANCHOR (TRUNNION TYPE ON STRUCTURE) AO S33, S35
ST-A4-1131H HAS-31 ANCHOR FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1132 AS-32 TRUNNION TYPE FOR ALLOY AND HEAT TREATED PIPE AO S34, S36
ST-A4-1136 AS-41 ANCHOR (FOR COLO INSULATED PIPE; TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1137 AS-42 ANCHOR (FOR COLO INSULATED PIPE; TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1138 AS-50 ANCHOR (U-BOL T TYPE ON STRUCTURE) AO -
ST-A4-1141 DF-31 OIRECTIONAL STOP (TRUNNION TYPE ON F/O) AO -
ST-A4-1141H HDF-31 OIRECTIONAL STOP FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON F/O) AO -
ST-A4-1142 DF-32 TRUNNION TYPE FOR ALLOY ANO HEAT TREATED PIPE AO -
ST-A4-1143 DF-33 3-WAY STOP (TRUNNION TYPE ON F/O) AO -
ST-A4-1143H HDF-33 3-WAY STOP FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON F/O) AO -
ST-A4-1144 DF-34 TRUNNION TYPE FOR ALLOY ANO HEAT TREATEO PIPE AO -
ST-A4-1151 DS-1 DIRECTIONAL STOP (FOR HOT INSULATED PIPE; SHOE TYPE) AO S12, S13
ST-A4-1151H HDS-1 DIRECTIONAL STOP FOR HIGH PRESSURE PIPING (FOR HOT INSULATED PIPE;SHOE TYPE) AO -
ST-A4-1153 DS-3 OIRECTIONAL STOP (FOR BARE & SLOP UNE) AO S12, S13
NIOEC STANDARD
P/S STO.
No. (SD-5006)
ST-M-1156 DS-6 OIRECTIONAL STOP (FOR BARE PIPE) AO -

ST-A4-1156H HDS-6 OIRECTIONAL STOP FOR HIGH PRESSURE PIPING (FOR BARE PIPE) AO -
ST-M-1157 DS-7 3-WAY STOP (FOR HOT INSULATEO PIPE; SHOE TYPE) AO S14, S15
ST-A4-115S DS-S 3-WAY STOP (FOR BARE & SLOP LINE) AO -
ST-M-1160 DS-31 OIRECTIONAL STOP (1/4) (TRUNNION TYPE ON STRUCTURE) AO -
ST-M-1160 DS-32 OIRECTIONAL STOP (2/4) (TRUNNION TYPE ON STRUCTURE FOR ALLOY & SS) AO -
ST-M-1160 DS-33 3-WAYL STOP (3/4) (TRUNNION TYPE ON STRUCTURE) AO -
ST-M-1160 DS-34 3-WAYL STOP (3/4) (TRUNNION TYPE ON STRUCTURE FOR ALLOY & SS) AO -
ST-A4-1160H HDS-31 OIRECTIONAL STOP FOR HIGH PRESSURE PIPING (1/2) (TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1160H HDS-32 3-WAY STOP FOR HIGH PRESSURE PIPING (1/2) (TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1161 GF-31 GUIOE (TRUNNION TYPE ON F/O) AO -
ST-A4-1161H HGF-31 GUIOE FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON F/O) AO -
ST-M-1162 GF-32 TRUNNION TYPE FOR ALLOY ANO HEAT TREATEO PIPE AO -
ST-A4-1163 GF-33 GUIOE (AOJUSTABLE, TRUNNION TYPE ON F/O) AO -
ST-M-1164 GF-34 GUIOE (AOJUSTABLE, TRUNNION TYPE ON F/O FOR ALLOY & SS) AO -
ST-M-1165 GF-41 GUIOE (FOR COLO INSULATEO PIPE) AO -
ST-M-1167 GF-43 GUIOE (FOR COLO INSULATEO PIPE) AO -
ST-M-1171 GS-1 GUIOE (FOR HOT INSULATEO PIPE; SHOE TYPE) AO SOS, S09, S10, S11
ST-A4-1171H HGS-1 GUIOE FOR HIGH PRESSURE PIPING (FOR HOT INSULATEO PIPE; SHOE TYPE) AO -
ST-M-1173 GS-3 GUIOE (FOR BARE & SLOP PIPE) AO sos' S09' s1o' s11
ST-M-1174 GS-4 GUIOE (FOR COLO INSULATEO PIPE) AO -
ST-A4-1175 GS-5 GUIOE (FOR HEAT TREATEO PIPE) AO S1S
ST-A4-1176 GS-6 GUIOE (FOR BARE PIPE) AO S01
ST-A4-1176H HGS-6 GUIOE FOR HIGH PRESSURE PIPING (FOR BARE PIPE) AO -
ST-A4-117S GS-S GUIOE (FOR 4' & SMALLER BARE PIPE; U-BOLT TYPE) AO -
ST-M-1179 GS-11 GUIOE (FOR BARE RISER PIPE) AO -
ST-A4-11SO GS-12 GUIOE (FOR BARE RISER PIPE) AO -

ST-A4-11 S1 GS-21 GUIOE (FOR BARE RISER PIPE; U-BOLT TYPE) AO -
ST-A4-11S2 GS-22 GUIOE (FOR BARE RISER PIPE) AO -
ST-A4-11S3 GS-24 FOR BARE RISER MULTI-PIPE AO -
ST-A4-11S4 GS-31 FOR HOT INSULATEO RISER PIPE AO -
ST-A4-11S5 GS-32 GUIOE (FOR HOT INSULATEO PIPE) AO -
ST-A4-11S6 GS-33 GUIOE (FOR COLO INSULATEO RISER PIPE) AO -
ST-A4-11S7 GS-34 GUIOE (FOR COLO INSULATEO RISER PIPE) AO -
ST-A4-11SS GS-35 GUIOE (TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-11 SSH HGS-35 GUIOE FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-11S9 GS-36 GUIOE (TRUNNION TYPE ON STRUCTURE) AO -
ST-M-1190 GS-41 GUIOE (FOR COLO INSULATEO PIPE) (1/2) AO -
ST-M-1190 GS-50 GUIOE (FOR COLO INSULATEO PIPE) (2/2) AO -
ST-A4-1191 GV-21 GUIOE (FOR BARE RISER PIPE; VESSEL CLIP) AO -
ST-M-1192 GV-22 GUIOE (FOR BARE RISER PIPE; VESSEL CLIP) (1/2) AO -
ST-M-1192 GV-23 GUIOE (FOR BARE RISER PIPE; VESSEL CLIP) (2/2) AO -
ST-M-1193 GV-24 GUIOE (FOR BARE RISER MULTI-PIPES; VESSEL CLIP) AO -
ST-M-1194 GV-25 GUIOE (FOR BARE RISER PIPE; VESSEL CLIP) AO -
ST-M-1195 GV-26 GUIOE (FOR BARE RISER MULTI-PIPES; VESSEL CLIP) AO -
ST-M-1196 GV-31 GUIOE (FOR HOT INSULATEO RISER PIPE; VESSEL CLIP) AO -
NIOEC STANDARD
P/S STO.
No. (SD-5006)
ST-A4-1197 GV-32 GUIOE (FOR HOT INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-M-1198 GV-33 GUIOE (FOR HOT INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-A4-1201 GV-41 GUIOE (FOR COLO INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-M-1203 GV-43 GUIOE (FOR COLO INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-A4-1211 HC-1 HANGER (UNOER CONCRETE) AO -
ST-A4-1212 HC-11 UNOER CONCRETE AO -
ST-A4-1213 HC-21 HANGER (TRUNNION TYPE UNOER CONCRETE) AO -
ST-A4-1214 HC-31 HANGER (TRUNNION TYPE UNOER CONCRETE) AO -
ST-A4-1215 HC-61 HANGER (FOR MULTI-PIPES UNOER CONCRETE) AO -
ST-M-1216 HC-64 HANGER (FOR MULTI-PIPES UNOER CONCRETE) AO -
ST-A4-1221 HS-1 HANGER (UNOER STRUCTURE) AO S63, S64
ST-A4-1222 HS-3 UNOER STRUCTURE AO -
ST-A4-1224 HS-11 UNOER STRUCTURE AO S62
ST-A4-1226 HS-13 UNOER STRUCTURE AO -
ST-A4-1231 HS-21 HANGER (UNOER STRUCTURE; TRUNNION TYPE) AO -
ST-A4-1232 HS-31 HANGER (TRUNNION TYPE UNOER STRUCTURE) AO -
ST-A4-1236 HS-51 W/MOTHER PIPE, TRUNNION TYPE AO -
ST-A4-1241 HD-1 HOL OOWNS (FOR BARE OR HOT INSULATEO PIPE WNIBRATION) AO -
ST-A4-1245 HD-5 HOLO OOWNS (FOR COLO INSULATEO PIPE WNIBRATION) AO -
ST-A4-1246 HD-6 HOLO OOWNS (FOR INSULATEO PIPE WNIBRATION) (1/2) AO -
ST-A4-1246 HD-11 HOLO OOWNS (FOR VIBRATION UNES; FIXEO BANO TYPE) (2/2) AO -
ST-A4-1247 HD-12 HOLO OOWNS (FOR VIBRATION UNES; FIXEO BANO TYPE) AO S04, S05
ST-A4-1251 PS-1 GUSSET SUPPORT (FOR ANGLE VAL VE) AO -
ST-M-1252 PS-2 GUSSET SUPPORT (FOR BRANCH PIPE; WELOING TYPE) AO 866
ST-A4-1253 PS-3 GUSSET SUPPORT (FOR BRANCH PIPE; U-BOLT TYPE) AO -
ST-M-1255 PS-11 STOPPER LUG (FOR RISER PIPE) AO -
ST-A4-1257 PS-23 PIPE PAO (FOR POINT CONTACT) AO -
ST-M-1258 PS-24 PIPE PAO (FOR UNE CONTACT) AO -
ST-A4-1261 RC-1 RESTING (FOR MULTI-PIPES ON CONCRETE WALL) AO -
ST-M-1262 RC-3 RESTING (FOR MUL TI-PIPES ON CONCRETE WALL) AO -
ST-M-1263 RC-5 RESTING (FOR MULTI-PIPES ON CONCRETE WALL) AO -
ST-A4-1264 RC-7 RESTING (T-TYPE ON STRUCTURE) (1/2) AO -
ST-A4-1264 RC-8 RESTING (FOR MULTI-PIPES ON CONCRETE WALL) (2/2) AO -

ST-A4-1268 RC-13 RESTING (FOR MUL TI-PIPES ON CONCRETE WALL) AO -
ST-M-1269 RC-14 RESTING (FOR MULTI-PIPES ON CONCRETE WALL) AO -
ST-A4-1271 RF-1 RESTING (FOR VIBRATEO MULTl-PIPES ON F/O) AO -
ST-M-1272 RF-2 RESTING (FOR MULTI-PIPES ON F/O) AO -
STANDARD PIPE SUPPORT, 3607 /32-S0-5100
NIOEC STANDARD
P/S STO.
No. (SD-5006)
ST-A4-1273 RF-3 RESTING (FOR MULTI-PIPE ON F/O) AO -

ST-A4-1274 RF-5 RESTING (FOR MUL TI-PIPE ON F/D) AO -
ST-A4-1275 RF-7 RESTING (T-TYPE) AO -
ST-A4-1276 RF-9 RESTING (T-TYPE FOR HEAVY OUTY) AO S57
ST-A4-1277 RF-12 RESTING (FOR 26' & LARGER PIPE; AOJUSTABLE TYPE) AO -
ST-A4-1278 RF-31 RESTING (TRUNNION TYPE ON F/O) AO S29, S31
ST-A4-1278H HRF-31 RESTING FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON F/O) AO -
ST-A4-1279 RF-32 RESTING (TRUNNION TYPE ON F/O) AO S30, S32
ST-A4-1280 RF-33 AOJUSTABLE; TRUNNION TYPE ON F/O AO -
ST-A4-1281 RF-34 AOJUSTABLE; TRUNNION TYPE ON F/O AO -
ST-A4-1282 RF-35 AOJUSTABLE; TRUNNION TYPE ON F/O AO S37, S38, S41, S42
ST-A4-1283 RF-36 AOJUSTABLE; TRUNNION TYPE ON F/O AO S39, S40, S43, S44
ST-A4-1284 RF-37 RESTING (ADJUSTABLE; TRUNNION TYPE ON F/O) (1/2) AO -
ST-A4-1285 RF-41 RESTING (FOR COLO INSULATEO PIPE; TRUNNION TYPE ON F/D) AO -
ST-A4-1286 RF-42 RESTING (FOR COLO INSULATED PIPE; TRUNNION TYPE ON F/O) AO -
ST-A4-1287 RF-43 FOR COLO INSULATEO PIPE; AOJUSTABLE, TRUNNION TYPE ON F/O AO -
ST-A4-1289 RF-46 FOR COLO INSULATEO PIPE; AOJUSTABLE, TRUNNION TYPE ON F/O AO -
ST-A4-1290 RF-47 RESTING (FOR COLO INSULATEO PIPE; AOJUSTABLE, TRUNNION TYPE ON F/O) AO -
ST-A4-1291 RS-1 RESTING (FOR MULTI-PIPES ON STRUCTURE) AO S47
ST-A4-1295 RS-9 RESTING (FOR MULTI-PIPES ON STRUCTURE) AO -
ST-A4-1296 RS-11 RESTING (FOR MUL TI-PIPES ON STRUCTURE) AO S53, S54
ST-A4-1297 RS-12 RESTING (FOR MULTl-PIPES ON STRUCTURE) (1/2) AO -
ST-A4-1297 RS-13 RESTING (FOR MULTI-PIPES ON STRUCTURE) (2/2) AO S53, S54
ST-A4-1298 RS-14 RESTING (FOR MUL TI-PIPES ON STRUCTURE) AO -
ST-A4-1303 RS-24 RESTING (FOR MULTl-PIPES ON STRUCTURE) (1/2) AO -
ST-A4-1303 RS-25 RESTING (FOR MULTI-PIPES ON STRUCTURE) (2/2) AO -
ST-A4-1305 RS-27 RESTING (FOR MUL TI-PIPES ON STRUCTURE) AO -
ST-A4-1311 RS-31 RESTING (TRUNNION TYPE ON STRUCTURE) AO S29, S31
ST-A4-1311H HRS-31 RESTING FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1312 RS-32 RESTING (TRUNNION TYPE ON STRUCTURE) (1/2) AO S30, S32
ST-A4-1312 RS-33 RESTING (TRUNNION TYPE ON STRUCTURE) (2/2) AO -
ST-A4-1312H HRS-33 RESTING FOR HIGH PRESSURE PIPING (TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1313 RS-41 RESTING (FOR COLO INSULATEO PIPE; TRUNNION TYPE ON STRUCTURE) AO -
ST-A4-1314 RS-42 RESTING (FOR COLO INSULATEO PIPE; TRUNNION TYPE ON STRUCTURE) (1/3) AO -
ST-A4-1314 RS-43 RESTING (FOR BARE & INSULATEO RISER PIPE) (2/3) AO -
NIOEC STANDARD
P/S STO.
No. (SD-5006)
ST-M-1314 RS-44 RESTING (FOR BARE RISER PIPE; U-BOL T TYPE) (3/3) AO -
ST-M-1315 RS-61 RESTING (W/MOTHER PIPE) AO -
ST-M-1317 RS-64 RESTING (W/MOTHER PIPE) (1/2) AO -
ST-M-1317 RS-65 RESTING (W/MOTHER PIPE) (212) AO -
ST-M-1318 RS-70 RESTING (FOR HORIZONTAL BENO; TRUNNION TYPE) (1/2) AO 845, 846
ST-M-1318 RS-70 RESTING (FOR HORIZONTAL BENO; TRUNNION TYPE) (212) AO 845, 846
ST-A4-1318H HRS-70 RESTING FOR HIGH PRESSURE PIPING (FOR HORIZONTAL BENO; TRUNNION TYPE) (1/2) AO -
ST-A4-1318H HRS-70 RESTING FOR HIGH PRESSURE PIPING (FOR HORIZONTAL BENO; TRUNNION TYPE) (212) AO -
ST-M-1319 RS-71 RESTING (FOR VERTICAL BENO; TRUNNION TYPE) (1/4) AO 845, 846
ST-M-1319 RS-71 RESTING (FOR VERTICAL BENO; TRUNNION TYPE) (214) AO 845, 846
ST-A4-1319 RS-72 RESTING (FOR HORIZONTAL BENO; TRUNNION TYPE) (3/4) AO -
ST-M-1319 RS-72 RESTING (FOR HORIZONTAL BENO; TRUNNION TYPE) (4/4) AO -
ST-A4-1319H HRS-71 RESTING FOR HIGH PRESSURE PIPING (FOR VERTICAL BENO; TRUNNION TYPE) (1/4) AO -
ST-A4-1319H HRS-71 RESTING FOR HIGH PRESSURE PIPING (FOR VERTICAL BENO; TRUNNION TYPE) (214) AO -
ST-A4-1320 RS-80 RESTING (W/MOTHER PIPE) AO -
ST-M-1321 RV-2 FOR BARE ANO INSULATEO PIPE, VESSEL CLIP (1/2) AO 850
ST-M-1321 RV-3 RESTING (FOR BARE & INSULATEO PIPE; VESSEL CLIP) (212) AO -
ST-M-1322 RV-5 FOR BARE ANO INSULATEO PIPE, VESSEL CLIP AO 850
ST-M-1323 RV-7 RESTING (FOR BARE & INSULATEO PIPE; VESSEL CLIP) AO 850
ST-M-1324 RV-21 RESTING (FOR BARE RISER PIPE; VESSEL CLIP) AO -
ST-M-1326 RV-24 RESTING (FOR BARE RISER MULTI-PIPE; VESSEL CLIP) AO -
ST-M-1327 RV-26 RESTING (FOR BARE RISER MULTl-PIPE; VESSEL CLIP) (1/2) AO -
ST-M-1327 RV-27 RESTING (FOR INSULATEO RISER MULTl-PIPE; VESSEL CLIP) (2/2) AO -
ST-M-1328 RV-31 RESTING (FOR HOT INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-A4-1332 RV-35 RESTING (FOR HOT INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-M-1334 RV-37 RESTING (FOR INSULATEO RISER MULTl-PIPE; VESSEL CLIP) (1/3) AO -
ST-M-1334 RV-38 RESTING (FOR BARE PIPE; VESSEL CLIP) (213) AO -
ST-M-1334 RV-39 RESTING (FOR INSULATEO PIPE; VESSEL CLIP) (3/3) AO -
ST-M-1335 RV-41 RESTING (FOR COLO INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-A4-1336 RV-42 RESTING (FOR COLO INSULATEO RISER PIPE; VESSEL CLIP) AO -
ST-M-1346 TR-1 RESTING (FOR RISER PIPE; TRUNNION TYPE) AO 824

NIOEC STANDARD
P/S STO.
No. (SD-5006)
ST-A4-1346H HTR-1 RESTING FOR HIGH PRESSURE PIPING (FOR RISER PIPE; TRUNNION TYPE) AO -
ST-A4-1347 TR-2 RESTING (FOR RISER PIPE; TRUNNION TYPE) AO 824
ST-A4-1347H HTR-2 RESTING FOR HIGH PRESSURE PIPING (FOR RISER PIPE; TRUNNION TYPE) AO -
ST-A4-1351 SC-21 SPRING (HANGER TYPE UNDER CONCRETE) AO -
ST-A4-1356 SF-61 SPRING (T-TYPE ON F/D) AO -
ST-A4-1357 SF-62 SPRING (T-TYPE ON F/D) AO -
ST-A4-1358 SF-71 SPRING WEDGE (FOR VIBRATION UNE) AO -
ST-A4-1361 SS-21 SPRING (HANGER TYPE UNDER STRUCTURE) AO -
ST-A4-1362 SS-22 SPRING (HANGER TYPE ON STRUCTURE) AO -
ST-A4-1363 SS-61 SPRING (T-TYPE ON STRUCTURE) AO -
ST-A4-1364 SS-62 SPRING (T-TYPE ON STRUCTURE) AO -
ST-A4-1374 SV-33 SPRING (FOR HOT INSULATED RISER PIPE; VESSEL CLIP) AO -
ST-A4-1375 SV-34 SPRING (FOR HOT INSULATED RISER PIPE; VESSEL CLIP) (1/3) AO -
ST-A4-1375 SV-35 SPRING (FOR BARE RISER PIPE; VESSEL CLIP) (2/3) AO -
ST-A4-1375 SV-36 SPRING (FOR BARE RISER PIPE; VESSEL CLIP) (3/3) AO -
ST-A4-1376 SV-51 SPRING (FOR COLO INSULATED RISER PIPE; VESSEL CLIP) AO -
ST-A4-1377 SV-52 SPRING (FOR COLO INSULATED RISER PIPE; VESSEL CLIP) AO -
ST-A4-1381 FS-1 FIELD SUPPORT AO -
ST-A4-1382 FS-2 FIELD SUPPORT AO -
ST-A4-1390 SU-1 SUDE UNIT (FOR LOW FRICTION) AO -
ST-A4-1391 SU-2 SUDE UNIT (FOR LOW FRICTION) AO -
ST-A4-1392 STF-1 STIFFNER PLATE (FOR SUPPORT REINFORCING) AO -
ST-A4-1393 VRS-15 RESTING (FOR CLASS 150 VALVE/FLANGE) (1/4) AO -
ST-A4-2001 - CLIP FOR PIPE SUPPORTS (CLIP NO. 101A/B, 102A/B & 103A/B) AO -
ST-A4-2002 - CLIP FOR PIPE SUPPORTS (CLIP NO. 104 A, B & C) AO -
ST-A4-2003 - CLIP FOR PIPE SUPPORTS (CLIP NO. 105 A, B & C) AO -
ST-A4-2004 - CLIP FOR PIPE SUPPORTS (CLIP NO. 121 & 122A/B, -46° & UNDER COLO PIPE) AO -
ST-A4-2005 - CLIP FOR PIPE SUPPORTS (CLIP NO. 123A/B/C & 124A/B/C) AO -
REV
GENERAL NOTES ST-A4-0001
AO
1. THESE STANDARD DRAWINGS COVER THE FIGURE, MATERIAL, LIMIT OF LOCATION & LOADING AND
DIMENSIONAL DATA TO BE USED IN THE DESIGN AND FABRICATJON OF SUPPORT SYSTEM.
IT CONSISTS OF THE FOLLOWING SECTION.
- ST-M-0000 : STANDARD DWG. LIST
- ST-M-0001 : GENERAL NOTES
- ST-A4-0002 N 0005 : ALLOWABLE LOAD TABLE
- ST-M-0006 : LOCAL SUPPORT FOUNDATION LOAD TABLE.
- ST-M-1000 N 1032 : PIPING SUPPORT ATTACHMENT DWG.
- ST-M-1100 N 1291 : PIPING SUPPORT STANDARD DWG.
- ST-M-2001 N 2005 : PIPING SUPPORT CLIP DWG.
FOR THE DETAil APPLICATION IN THE DESIGN ANO FABRICATION OF SUPPORT SYSTEM, REFER TO PIPING SUPPORT
SPECIFICA TION APPLIED IN EACH PROJECT.
2. SUPPORT TYPE SHALL BE SELECTED ACCORDING TO THE APPLICABLE LOCATION LIMIT ANO ALLOWABLE LOADS FOR EACH
SUPPORT UNDER THE SUPERVISION OF STRESS ENGINEER.
3. UNITS USED HERE FOLLOWS THE METRIC AND KILOGRAM UNITS. HOWEVER, NOMINAL SIZE OF RUN PIPE AND ROO ARE
IN ACCORDANCE WITH INCH SYSTEM.
4. MATERIAL ANO SIZE OF COMPONENT SHOWN ON DRAWING ARE NOT MANDATORY OPTION. THE EQUIVALENT ONES FROM
OTHER CODES AND STANDARDS MAY BE USED PER PROJECT REQUIREMENTS IF THEIR STRENGTH ANO MECHANICAL
PROPERTIES ARE CONFIRMED TO BE SAME AS THOSE OF EXISTING COMPONENT SPECIFICATION.
5. WELDING SYMBOLS ARE IN ACCORDANCE WITH AWS(AMERICAN WELDING SOCIETY) A2.4-79.

6. SIZE SYMBOL OF MEMBER SHOWN ON DRAWINGS ARE USED FOR FOLLOWING MEMBER SIZE.
MEMBER SIZE SIZE REMARKS

SYMBOL DESIGNATION
A3 30x30x3
A5 50x50x6
A6 65x65x6
A7 75 X 75 X 9
A9 90 X 90 X 10
ANGLE Al O 100 X 100 X 10
A13 130 X 130 X 12
A15 150 X 150 X 15
A17 175 X 175 X 15
A20 200 X 200 X 20
A25 250 X 250 X 25
C10 100 X 50 X 5 X 7.5
C12 125 X 65 X 6 X 8
C15 150 X 75 X 6.5 X 10
CHANNEL
C20 200 X 90 X 8 X 13.5
C25 250 X 90 X 9 X 13
CJO 300 X 90 X 9 X 13
H10 100 X 100 X 6 X 8
H12 125 X 125 X 6.5 X 9
H15 150 X 150 X 7 X 10
H-BEAM H17 175 X 175 X 7.5 X 11
H20 200 X 200 X 8 X 12
H25 250 X 250 X 9 X 14
H30 300 X 200 X 9 X 14
7. UNLESS OTHERWISE SPECIFIED, BOL TS ANO NUTS SHALL BE OF HEXAGON TYPE CONFORMING TO ANSI B18.2.1 AND 818.2.2 RESPECTIVEL Y.
ANO THEIR THREADS SHALL BE IN CONFORMANCE WITH ANSI 81.1, UNC 2A/2B FOR THE COARSE THREAD SERIES.
8. THE MAXIMUM OPERA TING TEMPERA TURE FOR SUPPORT IS BASED ON TIHE APPLIED MATERIAL.
TIHE TEMPERA TURE LIMIT FOR MATERIAL IS AS FOLLOWS.
PIPING SUPPORT MATERIAL

DESCRIPTION MATERIAL TEMPERATURE RANGE
PIPE OTHERS
API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. A283 GR.C OR EQ. - 29ºC N 350ºC
A515 GR.60 OR EQ. - 29ºC N 530ºC
CAR BON
STEEL A333 GR.1 OR GR.6 A333 GR.6 OR EQ. A516 GR.60 OR EQ. -45ºC N 35o·c
A333 GR.3 A203 GR.O OR EQ.
ALLOY A335 P11 A335 P11 OR EQ. A387 GR.11 OR EQ. -29·c N sss·c
STEEL A335 P22 A335 P22 OR EQ. A387 GR.22 OR EQ. -29·c N sgs·c
STAINLESS A312 TP304 OR TP316 A312 TP304 OR EQ. A240-304 OR EQ. -198ºC N 530ºC
STEEL A312 TP321 A312 TP321 OR EQ. A240-321 OR EQ. -254ºC N 530ºC
ESF AHAN REFINERY UPGRADING PROJECT
REV
ALLOWABLE LOAD TABLE ST-A4-0002 RESTING TYPE SHOE
AO
w w
2" - 8" 10" - 24" 26" - 80" 2" - 8" 10" - 24"
WELDING TYPE CLAMP TYPE
WELDING TYPE SHOE CLAMP TYPE SHOE

PIPE Wmax (KG) PER Wmax (KG) PER
REMARK
SHOE HEIGHT SHOE HEIGHT
SIZE THICK. H=100 H=150 H=200 H=250 H=100 H=150 H=200 H=250
2·N2-1;2· STO 650 600 - - 650 600 550 500
3"N6" STD 1900 1750 - - 1900 1750 1600 1450
8" STO 7400 6300 - -
10· STD 7600 5500 - -
12· STD 6500 5000 - -
14" STD 6000 4500 - -
16" STD 5500 4000 - - 7400 6300 5300 4500 NOTE 2, 3
18" STD 4500 3500 - -
20· STD 4000 3000 - -
22" STD 3500 2500 - -
24" STO 3000 2300 - -
26"N48" - 17300 15900 14800 13800 17300 15900 14800 13800
NOTE 3
52"N80" - 19300 18100 17000 16100 19300 18100 17000 16100
NOTE
1. CALCULA TION BASIS FOR ALLOWABLE LOADS
- MAT'L : CARBON STEEL (MAX. TEMP.= 350ºC)
- DYNAMIC LOAD FACTOR = 1.5
- FRICTION FACTOR = 0.3
- RUN PIPE THICKNESS = STD. WT.
2. FOR 1o· -24" CARBON STEEL WELDING TYPE SHOE, THE ALLOWABLE LOADS ARE DEPEND ON THE LOCAL STRESS OF RUN PIPE.
THE FOLLOWING CASES MA Y INCREASE ALLOWABLE LOADS.
- IF OPERATING TEMPERATURE IS LOWER THAN 2oo·c, Wmax CAN BE INCREASED BY 15%
- IF RUN PIPE IS THICKER THAN ·srn·.
Wmax CAN BE INCREASED BY 10%
- IF CODE STRESS ON PIPE DUE TO BENDING ANO PRESSURE IS LOWER THAN 0.2Sh, Wmax CAN BE INCREASED BY 15%
3. IF ACTUAL LOADS EXCEED ALLOWABLE LOADS, CONFIRM TO STRESS ENGINEER OR PERFORM THE DETAil "LOCAL STRESS ANALYSIS "
4. ALLOWABLE LOADS FOR ALLOY /STAINLESS STEEL SUPPORT SHALL BE REDUCED IN PROPORTION TO THE IN CREASE OF OPERA TING
TEMPERA TURE AS FOLLOWS.
Wmax 100%
88%
75%
63%
50%
38%
350 400 450 500 550 600

TEMPERA TURE ·c
REV
ALLOWABLE LOAD TABLE ST-A4-0003 ANCHOR TYPE SHOE
AO
2" - 4" 5" - 8" 10" - 18" 20" - 42"
Wmax, Pmax, Fmax PER SHOE HEIGHT (KG)

PIPE SIZE H=100 H=150 H=200 H=250
Wmax Pmax Fmax Wmax Pmax Fmax Wmax Pmax Fmax Wmax Pmax Fmax
2· 400 130 4100 270 80 3000 200 60 2400 170 50 1900
2-1/2" 500 170 4100 350 110 3000 270 80 2300 220 70 1900
3" 700 200 4100 470 150 3000 350 110 2300 270 90 1900
4" 1100 360 4100 750 240 3000 570 180 2300 670 120 1900
5"N5" 1570 530 4000 1100 360 2900 820 270 2300 670 220 1900
8" 2900 1000 3800 2000 760 2800 1500 590 2200 1200 480 1800
10" 12800 5500 8700 10600 4800 7300 9000 4200 6300 7800 3700 5500
12" 13000 6000 8600 10800 5300 7200 9200 4700 6200 8000 4200 5400
14" 13200 6300 8500 11000 5600 7100 9400 5100 6100 8200 4500 5400
16" 13300 6600 8400 11100 6100 7100 9500 5500 6100 8300 5000 5300
18" 13500 6900 8300 11300 6500 7000 9700 5900 6000 8500 5400 5300
2o"N22" 13600 5700 8200 11400 3900 6900 9800 3000 6000 8600 2400 5200
24"N26" 13800 7700 8150 11600 7400 6850 10000 7000 5900 8800 6000 5200
28"N34" 13900 8100 8000 11700 7800 6800 10100 7500 5900 9000 7100 5100
36"N42" 14000 8300 7900 11900 8400 6700 10300 8300 5800 9100 8000 5100
NOTE
1. CALCULA TION BASIS FOR ALLOWABLE LOADS
- MAT'L : CARBON STEEL (MAX. TEMP.= 350'C)
- DYNAMIC LOAD FACTOR = 1.5
2. EACH Wmax, Pmax, AND Fmax ARE THE MAXIMUM LOADS 'M-JICH ARE APPLIED CONCURRENTL Y.
3. IF ACTUAL LOADS EXCEED ALLOWABLE LOADS, CONFIRM TO STRESS ENGINEER OR PERFORM THE DETAil "LOCAL STRESS ANAL YSIS"
4. ALLOWABLE LOADS FOR ALLOY /STAINLESS STEEL SUPPORT SHALL BE REDUCED IN PROPORTION TO Tl-IE INCREASE OF OPERA TING
TEMPERA TURE AS FOLLOWS.
Wmax lOO%
Pmax 88%
Fmax 75%
63%
50%
38%
350 400 450 500 550 600

TEMPERA TURE ·e
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - · ·--- -
REV
ALLOWABLE LOAD TABLE ST-A4-0004 (1 OF 7) TRUNNION
AO
GENERAL NOTES FOR TRUNNION TYPE SUPPORT

1. CALCULATION BASIS FOR ALLOWABLE LOAD TABLE
- MATERIAL
BASE MAX. OPE. PIPE/TRUNNION MAX. CODE REINFORCED

PIPE/TRUNNION
MATERIAL TEMP.('C) TIHK. STRESS PAO THK.
API 5L GR.B, A106 GR.B 350
CARBON STEEL
A333 GR.1 OR GR.6 350
A335 P11 555 SEE TABLE SAME AS RUN
ALLOY STEEL (A~F)
0.6Sh
A335 P22 595 PIPE THK.
A312 TP304 OR TP316 530
STAINLESS STEEL
A312 TP321 530
- IF REINF. PAD IS USED, REINF. PAD MATERIAL SHALL BE SAME AS RUN PIPE ANO TRUNNION MATERIAL SHALL BE CARBON STEEL.
- FRICTION FACTOR : 0.3

- WELDING : FILLET WELDING, WELD THICKNESS EQUALS TO TRUNNION THICK. (FULL PENETRATION WELDING MAY INCREASE 10%
OF THERMAL EXPANSION LOAD.)
- APPLICABLE COOE: ASME B31.1/31.3, ASME 111, CLASS 2&3 FOR RUN PIPE
AISC, ASME' 111 NF FOR TRUNNION ANO BASE WELDING TO STRUCTURE
- MAXIMUM ALLOWED OEFLECTION OF TRUNNION TO RESTRAINT DIRECTION < 1.6 (mm)
- STRESS CHECK METIHOD : CODE STRESS + LOCAL STRESS < ALLOWABLE STRESS
- DYNAMIC LOAD FACTOR : 1.5
2. IF ACTUAL LOAD EXCEED ALLOWABLE LOADS OR DESIGN CONOITION IS NOT WITHIN TIHE LIMITATIONS, CONFIRM TO STRESS ENGINEER
OR PERFORM TIHE DETAil "LOCAL STRESS ANAL YSIS"
3. THE FOLLOWING CASES MAY INCREASE ALLOWABLE LOADS.
- IF OPERATING TEMPERUTURE IS LOWER THAN 2oo·c FOR CARBON STEEL, 150'C FOR ALLOY STEEL ANO STAINLESS STEEL,
150'C FOR ALLOY STEEL ANO STAINLESS STEEL, ALLOWABLE LOAD CAN BE INCREASED TO 15% MORE.
- IF CODE STRESS OUE TO BENDING ANO PRESSURE IS LOWER TIHAN 0.2Sh, ALLOWABLE LOAD CAN BE INCREASED TO 15% MORE.
- IF RUN PIPE IS THICKER TIHAN TABLE, ALLOWABLE LOAD CAN BE INCREASED TO 10% MORE.
4. FOR GUIDE/ANCHOR TYPE TRUNNION SUPPORT(TABLE-0/E/F). EACH W,Q1,Q2 ARE TIHE MAXIMUM LOADS WHICH ARE APPLIED
INOEPENDENTLY WITHOUT MOMENT LOADS. THE FOLLOWING LIMITATIONS SHALL BE USED WHEN TWO OR THREE DIRECTION
LOAOS ARE APPLIED CONCURRENTL Y.
Wmax
1.R Q
3
GUIDE (2-WAY) ANCHOR/GUIDE (3-WAY)
5. FOR THE RISER PIPING SUPPORT, TOTAL LASTING LOADS MAY BE INCREASED TO io2 AS SHOWN ON FIG-1.
Q2 IS TIHE VALUE OF EACH TABLE(A~F).
--------------------·~----
REV
RESTING TYPE TRUNNION
ALLOWABLE LOAD TABLE ST-A4-0004 (2 OF 7) (CARBON STEEL) AO
TABLE-A: CARBON STEEL RESTING (API 5L-B, MAx. OPE.TEMP. : 35o·c) WITHOUT PAD/WITH PAD
RUN TRUNNION MAX. ALLOWABLE LOADS (Kg)
PIPE (D) (d) L = 700 mm
SIZE THK. SIZE THK. w
1-1/2" 80 80
40 1-1/2" sm
2·
80 1-1/2" sm
40 2" sm
3•
80 2" sm
40 2" sm
4•
80 2· sm
40 4· sm
6"
80 4· sm
40 4· sm
8"
80 4" sm
40 6" sm
10·
80 6" sm
sm 8" sm
12·
40 8" sm
STO 8" sm
40 8" sm
STO 10· sm
16"
40 10· sm
sm 10· sm
18"
40 10· sm
20· 20 12· sm
24" 20 12" sm
26" sm 14" sm
28" sm 14" sm
30" sm 16" sm
32· STO 16" sm
34" sm rn· sm
36" sm 18" sm
NOTE : SEE GENERAL NOTES FOR APPLICATION OF THIS TABLE.
REV
ALLOWABLE LOAD TABLE ST-A4-0004 ( 3 OF 7) (ALLOY STEEL) AO
TABLE-8: LOW ALLOY STEEL RESTING (A335-P11, MAX. OPE.TEMP. : 450'C) WITHOUT PAD/WITH PAD
PIPE (D) (d) L = 700 mm L = 1000 mm
SIZE THK. SI ZE THK. w w Q1 w Q1 Q2
1-1/2" 80 1· 80
40 1-1/2· sm
2"
80 1-1/2" sm
40 2· sm
3"
80 2" sm
40 2· sm
4"
80 2· sm
40 4" sm
6"
80 4" STO
40 4" sm
8"
80 4" STO
40 5· sm
10"
80 6" sm
STO 8" sm
12"
40 8" sm
sm a· sm
14"
40 8" STO
sm 10" STO
16"
40 10· sm
STO 10· sm
18"
40 10" sm
20· 20 12" sm
24· 20 12· sm
26" sm 14· sm
28" sm 14" sm
30" STO 15· sm
32" STO 16" STO
34" sm 18" sm
36" sm 18· sm
REV
ALLOWABLE LOAD TABLE ST-A4-0004 ( 4 OF 7) (STAINLESS STEEL) AO
tw Q1
TABLE-C: STAINLESS STEEL RESTING (A312-TP304, MAX. OPE.TEMP. : 350"C) 'wHHOUT PAD/WITH PAD
PIPE (D) (d) L = 300 mm L = 1000 mm
SIZE THK. SIZE THK. w w w
1-1/2" 80S 1· 80S
40S 1-1/2" 40S

2"
80S 1-1/2" 40S
40S 2" 40S

3"
80S 2" 40S
40S 2" 40S

4"
80S 2" 40S
40S 4" 40S

6"
80S 4• 40S
40S 4" 40S

8"
80S 4" 40S
40S 6" 40S

10"
15.09 6" 40S
40S 8" 40S

12"
10.31 8" 40S
9.52 8" 40S

14"
11.13 8" 40S
9.52 10" 40S

16"
12.7 10" 40S
9.52 10" 40S

18"
14.27 10" 40S
20" 9.52 12" 40S
24" 9.52 12" 40S
26" 9.52 14" 9.52
28" 9.52 14" 9.52
30" 9.52 16" 9.52
32" 9.52 16" 9.52
34" 9.52 18" 9.52
36" 9.52 18" 9.52

GUIDE/ ANCHOR TYPE REV
ALLOWABLE LOAD TABLE ST-A4-0004 ( 5 OF 7) TRUNNION
(CAR BON STEEL) AO
w
TABLE-O: CARBON STEEL GUIDE ANCHOR (API 5L-B, MAX. OPE.TEMP.: 350ºC) WITHOUT PAD/WITH PAD
PIPE (D) (d) L = 1000 mm
1-1/2" 80 1" 80
40 1-1 /2" STD

2"
80 1-1 /2" STD
40 2" STD
3"
80 2" STD
40 2" STO
4"
80 2" STD
40 4" STD
6"
80 4" STD
40 4" STD
8"
80 4" STD
40 6" STD
10"
80 6" STD
STD 8" STO

12"
40 8" STO
STO 8' STO
40 8" STO
STD 10" STD

16"
40 10" STD
STD 10' STD

18"
40 10" STD
20' 20 12' STD
24" 20 12" STD
26" STD 14" STD
28" STD 14" STD
30" STD 16' STD
32" STO 16" STD
34' STD 18' STD
36' STD 18" STO
-----------------------------------------~º
GUIDE/ANCHOR TYPE REV
ALLOWABLE LOAD TABLE ST-A4-0004 ( 6 OF 7) TRUNNION
(ALLOY STEEL) AO
Q1/ '02 /
w
TABLE-E: LOW ALLOY STEEL GUIDE ANCHOR (A335-P11, MAX. OPE.TEMP. : 450"C) W1THOUT PAD/'MTH PAD
PIPE (D) (d) L = 1000 mm
SIZE THK. SIZE THK. w w 01 02
1-1/2" 80 1· 80
40 1-1/2" STD
80 1-1/2" STD
40 2" STD
3•
80 2" STD
40 2" STD
4•
80 2" STD
40 4" STD
6"
80 4" STD
40 4" STD
8"
80 4" STD
40 6" STD
10"
80 6" STD
STD 8" STD

12"
40 8" STD
STD 8" STD

14"
40 8" STD
STD 10" STD

16"
40 10" STD
STD 10" STD

18"
40 10" STD
20" 20. 12" STD
24" 20 12" STD
26" STD 14" STD
28" STD 14" STD
30" STD 16" STD
32" STD 16" STD
34" STD 18" STD
36" STD 18" STD
NOTE : SEE GENERAL NOTES FOR APPLICA TION OF THIS TABLE.

GUIDE/ ANCHOR TYPE REV
ALLOWABLE LOAD TABLE ST-A4-0004 (7 OF 7) TRUNNION
AO
(STAINLESS STEEL)
w
TABLE-F: STAINLESS STEEL GUIDE ANCHOR (A312- TP304, MAX. OPE. TEMP. : 350'C) WllHOUT PAD/WITH PAD
PIPE (D) (d) L = 700 mm L = 1000 mm
1-1/2" 80S 1" 80S
40S 1-1 /2" 40S

2"
80S 1-1 /2" 40S
40S 2" 40S

3"
80S 2" 40S
40S 2" 40S

4"
80S 2" 40S
40S 4" 40S

6"
80S 4" 40S
40S 4" 40S

8"
80S 4" 40S
40S 6" 40S

10"
15.09 6" 40S
40S 8" 40S

12"
10.31 8" 40S
9.52 8" 40S

14"
11.13 8" 40S
9.52 10" 40S

16"
12.7 10" 40S
9.52 10" 40S

18"
14.27 10" 40S
20" 9.52 12" 405
24" 9.52 12" 40S
26" 9.52 14" 9.52
28" 9.52 14" 9.52
30" 9.52 16" 9.52
32" 9.52 16" 9.52
34" 9.52 18" 9.52
36" 9.52 18" 9.52

STANDARD PIPE SUPPORT, 3607/32-74/ED-Pl/SD-5006
ALLOWABLE LOAD TABLE ST-A4-0004H REV

(1 OF 3) RESTING TYPE TRUNNION
FOR HIGH PRESSURE PIPING AO
~~ cf?
t' ~1
·~ ~""
1
~~
:.'l ~
¡ ~·
'
' <
";
!
~~ -,
~::1
:<- •'
"
..¡...
t
02
-h -
r+µ_ _,
-1-
tw Q¡
+ 4--
RUN PIPE TRUNNION ALLOW. LOADS(Kg) ALLOW. LOADS(Kg)
(O) (d) FOR RESTING FOR ANC/GUIDE
MATERIAL SIZE SCH. SIZE SCH. MATERIAL w Q1 Q2 w Q1 Q2
80 1" 80 A106-B 59 25 32 39 17 21
1-1 /2 11
160 1" 80 A106-B 78 37 38 52 25 25
xxs 1" 80 A106-B 87 42 41 58 28 27
80 1-1 /2 11
80 A106-B 140 61 80 93 41 53
2" 160 1-1/2 11
80 A106-B 202 96 99 135 64 66
xxs 1-1/2 11
80 A106-B 218 104 104 145 69 69
11. 9 1-1 /2 11
80 A106-B 223 107 106 149 71 71
80 2" 80 A106-B 244 109 141 163 73 94
3" 160 2" 80 A106-B 341 166 171 227 111 114
xxs 2" 80 A106-B 380 184 183 253 123 122
15.88 2" 80 A106-B 385 186 185 257 124 123
120 2" 80 A106-B 292 138 156 195 92 104
4" 160 2" 80 A106-B 339 166 170 226 111 113
xxs 2" 80 A106-B 369 180 179 246 120 119
20.62 2" 80 A106-B 391 191 186 261 127 124
120 4" 120 A106-B 1493 718 932 995 479 621
A106-8 6" xxs 4" 120 A106-B 2201 1132 1163 1467 755 775
28.58 4" 120 A106-B 2446 1235 1234 1631 823 823
120 4" 120 A106-B 1563 776 954 1042 517 636
8" 140 4" 120 A106-B 1770 893 1033 1180 595 689
160 4" 120 A106-B 1956 1007 1091 1304 671 727
25.40 4" 120 A106-B 1956 1007 1091 1304 671 727
120 6" 120 A106-B 3880 1994 2574 2587 1329 1716
11 140 6" 120 A106-B 4608 2413 2845 3072 1609 1897
10 6"
160 120 A106-B 5146 2739 3018 3431 1826 2012
31. 75 6" 120 A106-B 5146 2739 3018 3431 1826 2012
120 8" 120 A106-B 7758 4166 5177 5172 2777 3451
12 11 140 8" 120 A106-B 8674 4751 5177 5783 3167 3451
160 8" 120 A106-B 8674 5177 5177 5783 3451 3451
35.00 8" 120 A106-B 8674 5177 5177 5783 3451 3451
120 8" 120 A106-B 7785 4222 5177 5190 2815 3451
14 11
140 8" 120 A106-B 8674 4894 5177 5783 3263 3451
160 8" 120 A106-B 8674 5177 5177 5783 3451 3451
ALLOWABLE LOAD TABLE ST-A4-0004H (2 OF 3) RESTING TYPE TRUNNION

REV
q~ cp~
r- -1
~ 1
;.-¡·~
~~ ~t:r
¡ ~· ":
. ~~ _b - -1-
~ '
' <
,
# --
-<. •'
\
...J-
t
02
+
_,E!.. --'
fw Q1
+ 4--
AUN PIPE TRUNNION ALLOW. LOADS(Kg) ALLOW. LOADS(Kg)
(D) (d) FOR RESTING FOR ANC/GUIDE
16" 120 10" 120 A106-B 9883 5898 5898 6589 3932 3932
140 10" 120 A106-B 9883 5898 5898 6589 3932 3932
18" 120 10" 120 A106-B 9883 5898 5898 6589 3932 3932
140 10" 120 A106-B 9883 5898 5898 6589 3932 3932
120 12 1 120 A106-B 11722 6996 6996 7815 4664 4664
A672-B60 CL.32 20"
140 12" 120 A106-B 11722 6996 6996 7815 4664 4664
120 12 1 120 A106-B 11722 6991 6996 7815 4661 4664
22"
140 12" 120 A106-B 11722 6996 6996 7815 4664 4664
24 1 120 12 1 120 A106-B 11722 6996 6996 7815 4664 4664
140 12" 120 A106-B 11722 6996 6996 7815 4664 4664
1-1/2" xxs xxs
11 A335-P11 93 44 44 62 29 29
12.7 11 xxs
1 xxs
A335-P11 103 49 48 69 33 32
211 xxs 1-1 /2 A335-P11 252 121 123 168 81 82
13.5 1-1/2 1 xxs A335-P11 277 133 132 185 89 88
3" xxs 211 xxs A335-P11 466 230 232 185 89 88
A335-P11
411 xxs 211 xxs A335-P11 450 224 227 300 149 151
611 xxs 4" xxs A335-P11 2254 1146 1272 1503 764 848
8" 160 4" xxs A335-P11 1874 956 1114 1249 637 743
25.4 411 xxs A335-P11 2146 1106 1239 1431 737 826
10" 160 6" xxs A335-P11 5200 2759 3318 3467 1839 2212
12" 160 8" 160 A335-P11 7435 4437 4437 4957 2958 2958
14" 160 811 160 A335-P11 7435 4437 4437 4957 2958 2958
16" 120 10" 160 A335-P11 9266 5530 5530 6177 3687 3687
140 10" 160 A335-P11 9266 5530 5530 6177 3687 3687
18" 120 10" 160 A335-P11 9266 5530 5530 6177 3687 3687
140 10" 160 A335-P11 9255 5530 5530 6170 3687 3687
A691-1-1/4CR CL.42 20" 120 12" 160 A335-P11 10989 6553 6553 7326 4369 4369
140 12" 160 A335-P11 10989 6553 6553 7326 4369 4369
22" 120 12" 160 A335-P11 10989 6553 6553 7326 4369 4369
140 12" 160 A335-P11 10989 6553 6553 7326 4369 4369
24" 120 12" 160 A335-P11 10989 6553 6553 7326 4369 4369
140 12" 160 A335-P11 10989 6553 6553 7326 4369 4369
ALLOWABLE LOAD TABLE ST-A4-0004H REV

FOR HIGH PRESSURE PIPING
(3 OF 3) RESTING TYPE TRUNNION
AO
f==4 4,Y
·rr
t- ~1
~""
1
~,
¡
,l ~·
~ '1
,.
,'
< ~~--
~i:,
'< ••
\
..J-
~t:r
t
02
-~ -
+
--f!- --'
-1-
fw Q1
+ +-~
AUN PIPE TRUNNION ALLOW. LOADS(Kg) ALLOW. LOADS(Kg)
(D) (d) FOR RESTING FOR ANC/GUIDE
1-1/2" xxs 1" xxs A335-P22 95 45 45 63 30 30
2" xxs 1-1 /2" xxs A335-P22 257 124 126 171 83 84
3" xxs 2" xxs A335-P22 463 228 231 309 152 154
4" xxs 2" xxs A335-P22 447 223 225 298 149 150
160 2" xxs A335-P22 356 169 195 237 113 130
6" xxs 4" 160 A335-P22 2119 1090 1149 1413 727 766
A335-P22 160 4" 160 A335-P22 1794 892 1050 1196 595 700
8" 140 4" 160 A335-P22 1655 834 994 1103 556 663
160 4" 160 A335-P22 1850 946 1068 1233 631 712
10" 140 6" 160 A335-P22 4410 2311 2859 2940 1541 1906
160 6" 160 A335-P22 4960 2643 3054 3307 1757 2036
12" 140 8" 140 A335-P22 7435 4411 4437 4957 2941 2958
160 8" 140 A335-P22 7435 4437 4437 4957 2958 2958
14" 140 8" 140 A335-P22 7435 4437 4437 4957 2958 2958
16" 120 10" 140 A335-P22 9266 5530 5530 6177 3687 3687
18" 120 10" 140 A335-P22 9266 5530 5530 6177 3687 3687
A691-2-1/4CR CL.42 20" 120 12" 140 A335-P22 10985 6559 6553 7323 4373 4369
22" 120 12" 140 A335-P22 10985 6559 6553 7326 4373 4369
24" 120 12" 140 A335-P22 10985 6553 6553 7326 4369 4369
1-1 /2" xxs 1 11
xxs A376-TP321 72 34 34 48 23 23
2" xxs 1-1 /2" xxs A376-TP322 196 94 96 131 63 64
A376-TP321 3" 160 2" xxs A376-TP323 273 127 151 182 85 101
4" xxs 2" xxs A376-TP324 340 169 171 227 113 114
6" xxs 4" xxs A376-TP325 1702 866 961 1135 577 641
8" 140 4" xxs A376-TP326 1290 651 792 860 434 528
10" 140 6" xxs A376-TP327 3437 1812 2276 2291 1208 1517
12" 160 8" 140 A376-TP328 6196 3697 3697 4131 2465 2465
14" 140 8" 140 A376-TP329 6196 3462 3697 4131 2308 2465
A358-321 CL. 1 16" 140 10" 140 A376-TP330 7721 4608 4608 5147 3072 3072
18" 140 10" 140 A376-TP331 7721 4608 4608 5147 3072 3072
20" 140 12" 160 A376-TP332 9158 5465 5465 6105 3643 3643
22" 140 12" 160 A376-TP333 9158 5465 5465 6105 3643 3643
24" 140 12" 160 A376-TP334 9158 5465 5465 6105 3643 3643
VESSEL CLIP SUPPORT REV
ALLOWABLE LOAD TABLE ST-A4-0005 (1 OF 4)
(RESTING TYPE) AO
w
1
MAX.600 MAX.600
Wmax (Kg)
TYPE CLIP NO. MEM8ER
A !':: 400 400 < A s. 600
RV-2
101A/102A AS 75 50
RV-21
RV-41 1018/1028 A7 270 180
w w
MAX. 1000
\. MAX. 1000 .i
RV-31 /RV-42 RV-32/RV-43
Wmax (Kg)
A s. 400 400 < A !':: 600
RV-5
103A C10 940 280
RV-31/RV-32
RV-42/RV-43 1038 C15 1200 600
MIN. 600
MAX. 1700
RV-33/RV-34/RV-44 RV-35/RV-36 /RV-45/SV-33
Wmax (Kg)
A s. 1200 1200 < A S. 1700
RV-33/RV-34 104A/105A C15 4500 4000
RV-35~V-36
1048/1058 C20 6500 5500
RV-44/RV-45
SV-33/SV-34 104C/105C C30 10500 9000
(GUIDE TYPE) AO
~~
-~¡i
-
'1
1
MAX. 60 MAX. 600
TYPE CLIP NO. MEMBER

A s 400 400 < A s 600
Pmax (Kg) Fmax (Kg) Pmax (Kg) Fmax (Kg)
GV-21/GV-31 101A/102A AS 75 250 50 170
GV-41 1018/1028 A7 270 900 180 600
a-_é -Eíf-~
jP !p
~-_F XJ[J p
F
}-
1
'~b-
MAX. 10001
GV-22
tt GV-32
ttGV-42
H
GV-24
A s 500 500 < A s 1000

GV-22/GV-24 103A C10 170 270 110 260
GV-32/GV-42 1038 C15 390 490 270 480
jP jP p
j31F -Eíf-~ -:Sllf_F ~

~
-
M ~ ~
h
--
9 ¿ 4
Iª
MAX. 17 O -~
AX. 1 O
GV-25 GV-33 GV-43 GV-26
TYPE CLIP NO. MEM 8 ER A s 1200 1200 < A s 1700

GV- 2S/GV- 26 r--1_04_A_/.,...1o_s_A-+_c_1_s_-t--_6_s_o_-+-_2_0_00_---+_ _2_s_o_-+-_1_s_80_---1
r--~-~-4 ~~~.,...~~-~-~-+-~-~-~-+--~-~~-~--+--~-~-~~----+--:-~-~--+--~-~-~~----1
4
GV-33/GV-43
~·------.J
(RESTING, COLO INS.) AO
Wmax (Kg)
A s 400 400 < A s 600
121A AS 60 40
RV-51
1218 A7 210 140
Wmax (Kg)
A s 500 500 < A s 1000
RV-52 122A C10 750 220
RV-53 1228 C15 960 480
RV-55/SV-51
Wmax (Kg)
A s 1200 1200 < A ~ 1700
123A/124A C15 3600 3200
RV-54/RV-55
1238/1248 C20 5200 4400
SV-51/SV-52
123C/124C C30 8400 7200
ALLOWABLE LOAD TABLE ST-A4-0005 ( 4 OF 4)
(GUIDE, COLO INS.) AO
tp
- &B
-
~
1 1
JI--'
-~
q;g ~-_e
MAX. 600
GV-51
CLIP NO.
A :5: 400 400 < A :5: 600
TYPE MEM8ER
121A AS 60 200 40 130
GV-51
1218 A7 210 720 140 480
r+
I.'" 1000
~~
tp
GV-52

A s 500 500 < A s 1000
122A C10 170 270 110 260
GV.-52
1228 C15 390 490 270 480
-
.fil
- tp
{@
-~
~~
~
~¡
- MIN. 1000
MAX. 1700
GV-53

A :5: 1200 1200 < A s 1700
123A/124A C15 520 1600 200 1260
GV-53 1238/1248 C20 880 1600 360 1360
123C/123B C30 920 1600 390 1360
LOCAL SUPPORT FOUNDATION ,__R_EV____,
ALLOWABLE LOAD TABLE ST-M-0006 (1 OF 2)
(PAVING AREA) AO
1 ~~ l:SE~~Ow_ ' 12~

1 1
OF FDN.
ANCHOR BAR
INSERT PLA TE
~ OF FD~NCHOR BAR
/::,. H.P.F.S t 30 ' 1::,. H.P.F.S t 30
FDN. PAVING EL.
.. •
CHIPPING
TYPE-A
LEAN CONCRETE t=50
1 ~ l:SE~~Ow_ ' ~
1 1 1 TYPE-B
OF FDN.
6 -11-~i! .J' ~
TYPE
A
B
ALLOWABLE LOAD (KG)
1000
o~
~
1000
2000
c 2000 & ABOVE
PLAN-e
ANCHOR BAR
rcz:±::z:i::i/--, /::,. T.O.S EL.

(BY PIPING)
013@200 o
016@200 o
,.,.,
016@200 o
o
,.,.,
LEAN CONCRETE t=50
TYPE-C
NOTE
1. SEE GENERAL NOTES FOR APPUCA TION OF THIS TABLE.
·-----·---------·-··--- - -
LOCAL SUPPORT FOUNDATION REV
(NON-PAVING AREA)
t----
AO
~
j i OF ~DN. g ~
..._
..._
o
~·~,-~r•--<=>'--
ANCHOR BAR
ANCHOR BAR
ANCHOR BAR
016@200 013@200
,,.,oo
• ,50CL.
11
-...l-1-~.--j....J.._.:_:
016@200
100 ,,.,oo
(T'r?.i 1 LEAN CONCRETE \=50
TYPE-0
(:.i 11. LEAN CONCRETE \=50
TYPE-E
1300 l IN;E~~O~ ' I ~ 1
OF FDN.
ANCHOR BAR TYPE ALLOWABLE LOAD (KG)

D o ~ 1000
E 1000 ~ 2000
F 2000 & ABOVE
016@200
,,.,oo
LEAN CONCRETE t=50
TYPE-F
NOTE
1. SEE GENERAL NOTES FOR APPLICATION OF THIS TABLE.
---------"- --~·-
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-M-1000 ADIABA TIC BLOCK AD B
(FOR COLO PIPING TRUNNION) AO
NON-ASBESTOS SHEET "-. MEMBER " C

b
!l! 8 STOPPER
UNIT lmm)
NOM. SIZE TRUNNION M~MB}R
OF RUN PIPE (D) o b N R
e
2" 1-1 /2" 3 165 100 31 C100x50x5
2-1/2 2" 3 165 100 31 C100x50x5
3" 2" 3 165 100 31 C100x50x5
4" 2" 3 165 100 31 C100x50x5
5" 3" 3 190 115 45 C100x50x5
6" 4" 3 220 130 58 C100x50x5
8" 4" 3 220 130 58 C100x50x5
10" 6" 45 245 155 85 C200x80x7.5
12" 8" 55 290 180 110 C200x80x 7. 5
14" 8" 55 290 180 110 C200x80x7.5
16" 10· 70 340 210 137 C200x80x7.5
18" 10· 70 340 210 137 C200x80x7.5
20· 12" 80 380 235 162 C200x80x7.5
24" 12· 80 380 235 162 C200x80x7.5
26" 14" 90 410 250 178 C200x80x 7.5
28" 14" 90 410 250 178 C200x80x7.5
30" 16" 100 460 310 229 C200x80x 7.5
36" 18" 110 510 335 254 C200x80x 7.5
NOTE
1. MATERIAL
- URETHANE FOAM : SEE DWG. NO. ST-A4-1022
- STOPPER & MEMBER : A36 OR EQ.
- PLA TE : A36 OR EQ.
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-M-1001 U - BOLT UBT ,___
AO
w
u
z<(
a::
<(
w
_¡
u
__L__
E
~
E
n
1
---
1
1
-- -
1
--
U1
_¡
s'!il FOR GUIDE
~FOR ANCHOR
)
tB ·~
~
t• ~e 1
~=
==
.!di.
l. e ..1
UNIT (mm)
NOM.
d e s l'iEIGHT
Pl~EINCH
S~~E PIPE O.D. R
(UNC)
L (kg)
1/2" 21.3 14.0 1/4" 36 45 45 0.1
3/4" 26.7 16.0 1/4" 40 50 50 0.1
1" 33.4 18.5 1/4" 45 55 50 0.1
1-1/2" 48.3 25.0 3/8" 60 60 50 0.2
2· 60.3 32.5 3/8" 75 65 50 0.2
2-1/2" 73.0 39.0 1/2" 90 75 55 0.4
3• 88.9 46.5 1/2" 105 85 55 0.4
4• 114.3 59.5 5/8" 135 100 60 0.5
5• 141.3 72.0 5/8" 160 120 70 0.95
6" 168.3 87.0 5/8" 190 130 70 1.0
8" 219.1 112.5 3/4" 245 165 80 2.1
10· 273.1 140.0 3/4" 300 195 90 2.4
12· 323.9 165.5 1· 355 240 120 4.3
14• 355.6 183.0 1· 390 260 120 4.7
16" 406.4 208.0 1· 440 280 120 5.1
18" 457.2 235.5 1· 495 310 120 5.6
20· 508.0 257.5 1-1/4" 545 330 140 9.6
24" 609.6 310.0 1-1/4" 650 390 140 11.1
NOTE
1. MATERIAL
CODE RUN PIPE U-BOLT
K APl-5L GR.B, A106 GR.B A307 GR.B
y A335 P11 A193-B7 /A194-2H
w A335 P22 A193-B7 /A194-2H
X A312 TP304, TP316 A320-BB/A194-8
z A312 TP321 A320-B8/A194-8
~----------------------------------------------~--------
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1002 U-BOLT UBTC
(FOR COLO INSULA TED PIPE) AO
LU
u
:z
<
a::
<
'::i
u
E
,,.,
E
e
UNIT (mm)
FOR GUIDE FOR ANCHOR d
R
(UNC)
e L s ,IGHT
kg)
68 1/2" 148 110 70 0.5
82 112· 176 120 70 0.6
96 112· 204 135 70 0.6
112 1/2" 236 150 70 0.7
118 112· 248 160 70 0.7
126 5/8" 268 170 80 1.4
135 5/8" 286 180 80 1.5
140 5/8" 296 185 80 1.5
UNIT (mm)
146 5/8" 308 190 80 1.6
~
R
162 5/8" 340 210 80 1.7
i
25-50 51-100 101-150 151-200 201-250
168 5/8" 352 215 80 1.8
K T=50 T=100 T=150 T=200 T=250 176 3/4" 372 230 100 2.9
D 187 3/4" 394 240 100 3.1
112 • 68 112 162 - - 196 3/4" 412 250 100 3.2
3/4 • 68 118 168 - - 212 3/4" 444 265 100 3.4
1· 68 118 168 - - 226 1" 476 295 120 5.3
1-1 /2" 82 126 176 226 - 237 1· 498 305 120 5.5
2" 82 135 187 237 - 246 r 516 315 120 5.7
2-112" 96 140 196 246 - 262 1" 548 330 120 6.0
3" 96 146 196 246 - ?74 1· 572 340 120 6.1
4• 112 162 212 262 - 289 1-1/4" 608 370 150 10.5
5• 126 176 226 274 - 315 1-1 /4" 660 395 150 11.2
6" 140 187 237 289 - 339 1-1 /4" 708 420 150 11.9
8" 162 212 262 315 365 365 1-1 /4" 760 445 150 12.6
10· 196 246 289 339 389 389 1-1 /4" 808 470 150 13.3
12· 226 274 315 365 415 415 1-1 /4" 860 495 150 14.1
NOTE
1. MATERIAL
- U-BOL T : A36 OR EQ.
- NUTS : A307 GR.B OR EQ.
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-M-1003 U-BAND UBD AO
ít
(/)
1" TO 5"
6 1 • b --¡
T--=-~~~3
--~: ~ -:t _ -1 LJ
6" TO 16"
UNIT (mm)
NOM. BOLT/NUT(UNC) wt:IGHT
PtrE S\ZE
INCH
e G H p R b X t A d X L X s (Kg)
1· 95 5 12 135 18 50x6 - 5/8"x60x50 0.8
1-1/2'' 110 5 19.5 150 25.5 50x6 - 5/8"x60x50 0.9
2· 120 5 25.5 160 31.5 50x6 - 5/8"x60x50 1.0
2-1/2" 155 5 31.5 195 38 75x9 - 3/4"x70x55 2.3
3• 170 5 39.5 210 46 75x9 - 3/4"x70x55 2.5
4• 195 5 52 235 58.5 75x9 - 3/4"x70x55 2.8
5• 220 5 66 260 72 75x9 - 3/4"x70x55 3.2
6" 250 10 74 290 86 125x9 80 3/4"x75x55 6.2
8" 300 10 100 340 112 125x9 80 3/4"x75x55 7.3
10· 355 10 126 390 140 150x9 80 3/4"x75x55 10.4
12" 405 10 152 445 165 150x9 80 3/4"x75x55 11.8
14" 445 10 168 495 180 150x9 90 1"x85x65 13.4
16" 495 10 193 545 205.5 150x9 90 1"x85x65 14.9
1. MATERIAL 2. 2-NUTS ARE REQUIRED PER EACH BOL T

CODE RUN PIPE BAND BOLT & NUT
K APl-SL GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
X A312 TP304, TP316 A240 TP304 OR EQ. A193-B7 /A194-2H
z A312 TP321 A240 TP321 OR EQ. A193-B7 /A194-2H
--~---1
ST ANDAR O PIPE SUPPORT, 3607 /32-SD-5100
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1004

U-BANO UBDC REV.
(FOR COLD IN SULA TED PIPE) AO
• , B , ..
~,'~ i=n (/)
-.1 ~ ~
i------'--p
R=126 & SMALLER DETAIL FOR 80LT R= 135 & LARGER
UNIT (mm)
R
INS. THK CRADfrl THK
1" 1-1/2 2" 2-1/2 3" 4" 5" 6" 8" 10" 12" 14" 16"
25 - 50 50 68 82 82 96 96 112 126 135 162 196 212 237 262
51 - 100 100 118 126 135 135 146 162 176 187 212 237 262 289 315
101 - 150 150 168 176 187 187 196 212 226 237 262 289 315 339 365
151 - 200 200 - 226 237 237 246 262 274 289 315 339 365 389 415
201 - 250 250 - - - - - - - - 365 389 415 435 460
UNIT (mm)
R A e H p r B X t d(UNC) x L xS WEIGHT (kg)
68 - 195 40 235 6 FB-50x6 5/8"x80x55 1.3

82 - 220 55 260 6 FB-50x6 5/8"x80x55 1.4
96 - 250 70 290 6 FB-50x6 5/8"x80x55 1.6
112 - 300 80 340 9 FB-75x9 3/4"x90x65 3.9
118 - 315 90 355 9 FB-75x9 3/4"x90x65 4.1
126 - 330 100 370 9 FB-75x9 3/4"x90x65 4.3
135 80 345 110 385 9 FB-125x9 3/4"x90x65 8.2
146 80 370 120 410 9 FB-125x9 3/4"x90x65 8.8
162 80 400 135 440 9 FB-125x9 3/4"x90x65 9.6
168 80 420 145 460 9 FB-125x9 3/4"x90x65 9.8
176 80 430 150 470 9 FB-125x9 3/4"x90x65 10.3
187 80 450 160 490 9 FB-125x9 3/4"x90x65 10.8
196 80 470 170 510 9 FB-125x9 3/4"x90x65 11.3
212 80 500 185 540 9 FB-125x9 3/4"x90x65 12.0
226 90 535 200 585 9 FB-150x9 1"x95x70 16.0
237 90 560 210 610 9 FB-150x9 1"x95x70 16.7
246 90 575 220 625 9 FB-150x9 1''x95x70 17.1
262 90 610 230 660 9 FB-150x9 1"x95x70 18.1
274 90 635 245 685 9 FB-150x9 1"x95x70 18.7
289 90 665 260 715 9 FB-150x9 1"x95x70 19.6
315 90 715 280 765 9 FB-150x9 1"x95x70 21.1
339 90 765 305 815 9 FB-150x9 1"x95x70 22.6
365 90 815 330 865 9 F8-150x9 1"x95x70 24.1
389 90 865 355 915 9 FB-150x9 1"x95x70 25.6
415 90 915 380 965 9 FB-150x9 1"x95x70 27.0
435 90 955 400 1005 9 FB-150x9 1''x95x70 28.4
460 90 1005 425 1055 9 FB-150x9 1"x95x70 29.9
1. MATERIAL
- BOL T & NUT : A307 GR.B OR EQ.
2. 2-NUTS ARE REQUIRED PER EACH BOL T.
----·---··-
REV.
RISER LUG RLS
(FOR SPRING SUP'T)
AO
6" & SMALLER
8" TO 24"
UNIT (mm)
PIPE SIZE ALLOW.LOAD WEIGHT
(INCH) A B e D E F G T (Kg) (Kg)
3" 60 250 70 50 250 100 - 9 2150
4" 60 250 70 60 250 100 - 9 2200
5" 60 250 70 60 250 125 - 12 2750
6" 60 250 70 60 250 125 - 12 2750
8" 90 420 75 70 250 150 110 12 4000
10· 90 470 85 80 300 190 150 12 4650
12" 90 470 85 80 300 190 150 12 4400
14" 90 470 85 80 300 190 150 12 4300
16" 110 520 100 100 300 200 150 16 6000
18" 110 520 100 100 300 200 150 16 6000
20· 110 520 100 100 300 200 150 16 6000
24" 110 600 110 105 350 250 200 16 6700
NOTE
1. MATERIAL
- LUG PLA TE : SAME AS RUN PIPE OR MAT'L TABLE.
CODE RUN PIPE LUG PLA TE
K API 5L GR.B, A106 GR.B A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
W A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1006 CLEV!S CLS
AO
i'
~
-(#-
1. B .. 1
L
(FOR MACHI NE BOL T)
L ROO SIZE 1'' & SMALLER
(FOR STUO BOLT)
UNIT (mm)
ROO
rflZ~)
1nch
B E F H p P1 R w T BOLT SIZE
d(UNC)xLxSxS1 A~~~~·
3/8" 50 50 25 75 14 12 6 40 6 1/2"x100x30 275
1/2" 50 50 25 75 18 14 6 45 6 5/8"x120x40 515
5/8" 50 50 25 75 22 18 9 55 6 3/4"x140x45 820
3/4" 65 50 30 80 26 22 9 65 9 1"x180x60 1230
1" 75 75 45 120 33 26 9 65 9 1-1 /4"x205x70 2250
1-1 /4" 75 75 45 120 39 33 9 65 9 1-1 12" x225x80 3630
1-1 /2" 100 90 55 145 46 39 12 75 12 1-3'4"x265x95 5280
1-3/4" 100 90 55 145 52 46 12 95 12 2"x310x110 7120
2· 125 110 60 170 62 52 16 95 16 2-1 /4"x350x130 9390
2-1 /4" 150 125 75 200 70 62 16 100 16 2-112"x390x145 12350
2-112· 180 150 90 240 78 70 19 115 19 3"x440x165 15200
NOTE
1. MATERIAL COOE RUN PIPE CLE'v1S BOLT/NUT
- CLE'v1S : A283 GR.C OR EQ. K API 5L GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
- WHEN WELOED TO PIPE, MA T'L SHALL BE y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H OR EQ.
SAME AS RUN PIPE OR MAT'L TABLE.
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H OR EQ.
2. BOL T/NUT FOR 1" & SMALLER ROO SIZE ARE NOT X A312 TP304, TP316 A240-304 OR EQ. A193-87 /A194-2H OR EQ.
INCLUOEO IN THE SCOPE OF THIS ATTACHMENT. z A312 TP321 A240-321 OR EQ. A193-87 /A194-2H OR EQ.
3. BOL T/NUT SHALL BE GALVANIZED.

REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1007 LUG PLATE LPT ~
AO
s
I -rr ( I
~
45·V
Q I
-$-
~-
-
~-- ..._
- 1
lJ__ l. B
J
UNIT (mm)
ROD ALLOW.
s p BOLT SIZE
I~~~)
B E F H T
(UNC) Ll~~p
112· 50 50 25 75 9 3 18 5/8" 515
5/8" 50 50 25 75 9 3 22 3/4" 820
3/4" 65 50 30 80 12 5 26 1" 1230
1" 75 75 45 120 16 5 33 1-1 /4" 2250
1-1 /4" 75 75 45 120 16 5 39 1-1 /2" 3630
1-112· 100 90 55 145 19 8 46 1-3/4" 5280
1-3/4" 100 90 55 145 19 8 52 2· 7120
2" 125 110 60 170 22 8 62 2-114·· 9390
2-1 /4" 150 125 75 200 25 8 70 2-112· 12350
2-1 /2" 180 150 80 240 25 8 78 3• 15200
NOTE
1. MATRIAL
- LUG PLATE : A283 GR.C OR EQ. CODE RUN PIPE LUG BOLT/NUT
- WHEN WELDED TO PIPE, LUG MA T'L SHALL BE K API 5l. GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
SAME AS RUN PIPE OR MAT'L TABLE. y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H OR EQ.
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H OR EQ.
X A312 TP304, TP316 A240-304 OR EQ. A193-B7 /A194-2H OR EQ.
z A312 TP321 A240-321 OR EQ. A193-B7 /A194-2H OR EQ.
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-M-1008 ELBOW LUG EL AO
6t PLATE DxE
\'..... ! _,,, /
1
i
i L
(FOR STUD BOL T)
L
(FOR MACHINE BOL T)
8" & SMALLER 10" TO 24" DETAil OF BOLT /NUT
UNIT (mm
NOM.
PlrE
INCH
sw A B e D X E H p R T a bº
HEX BOLT
d(UNC) X L X s X 51
WEIGHT
(kg)
AL'(pw.
1K~~
3• 80 30 - - 175 26 159 12 o 5 - 0.8 1250
4• 80 30 - - 200 26 210 12 5 5 - 1.5 1450
5• 80 45 - - 200 33 262 16 5 10 - 3.5 1650
6" 80 45 - - 250 33 313 16 5 10 - 3.7 1650
8" 90 45 - - 250 39 415 16 5 10 - 4.2 2450
10· 100 45 48 80 X 50 300 45 518 12 5 15 1-3/4"x130x65 16.5 5000
12· 100 45 48 80 X 50 300 45 619 12 5 15 1-3/4"x130x65 17.0 5000
14" 100 45 48 80 X 50 300 45 711 12 5 15 1-3/4"x130x65 18.6 5000
16" 120 55 48 85 X 50 300 52 813 16 10 20 2" x195x65x65 45.1 6000
18" 120 55 48 85 X 50 300 52 915 16 10 20 2• x195x65x65 48.9 6000
20· 120 55 48 85 X 50 300 52 1016 16 10 20 2"x195x65x65 52.7 5500
24" 150 60 60 100 X 60 300 62 1220 16 10 20 2-1 /4'x235x75x75 91.3 5000
NOTE
1. MATERIAL 2. BOLT/NUT FOR 8" & SMALLER PIPE ARE NOT INCLUDED
SAME AS RUN PIPE OR MAT'L TABLE. IN THE SCOPE OF THIS ATTACHMENT.
CODE RUN PIPE LUG BOLT /NUT 3. BOL T/NUT SHALL BE GALVANIZED.
K API 5L GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H OR EQ.
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H OR EQ.
X A312 TP304, TP316 A240-304 OR EQ. A193-B7 /A194-2H OR EQ.
z A312 TP321 A240-321 OR EQ. A193-87 /A194-2H OR EQ.

RISER LUG RLH REV.
(FOR HANGER SUP'T) AO
6" & SMALLER
8" TO 24"
UNIT (mm)
PIPE SIZE ALLOW. LOAD WEIGHT
(INCH) A 8 e o E F p T1 T2 (CS, Kg) (Kg)
3• 30 250 70 50 30 - 22 12 - 220
4" 30 250 70 50 30 - 22 12 - 210
5" 30 275 70 60 30 - 26 16 - 200
6" 30 275 70 60 30 - 26 16 - 200
8" 45 370 95 80 45 160 33 12 9 9500
10" 45 390 100 90 45 170 39 16 12 11000
12· 45 390 100 90 45 170 39 16 12 9500
14" 45 390 100 90 45 170 39 16 12 9000
16" 55 410 115 100 55 200 46 19 12 10500
18" 55 410 115 100 55 200 46 19 12 9700
20" 55 410 115 100 55 200 46 19 12 8800
24" 55 450 125 100 55 210 52 19 16 10500
NOTE
1. MATERIAL
CODE RUN PIPE CLEVIS & LUG BOLT/NUT
- LUG : SAME AS RUN PIPE OR MAT'L TABLE.
K API 5L GR.8, A106 GR.8 A283 GR.C OR EQ. A307 GR.8 OR EQ.
2. BOLT/NUT SHALL BE GA VL VANIZED. y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H OR EQ.
w A335 P22 A387 GR. 22 OR EQ. A193-B7 /A194-2H OR EQ.
A312 TP304, TP316 A240-304 OR EQ. A193-87 /A194-2H OR EQ.
"7 A312 TP321 A240-321 OR EQ. A193-B7 /A194-2H OR EQ.
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1010 EYE BOLT EBT AO
1-1/2" & SMALLER ROO
(UNIT : mm)
ROO SI~ p BOLT SIZE s a ALLOWABLE
(d, inch (UNC) LOAD(Kg)
R-HT L-HT
3/8" 14 3/8" 170 110 3 275
1/2" 18 1/2" 170 110 3 515
5/8" 22 5/8" 220 140 3 820
3/4" 28 3/4" 220 140 3 1230
1" 34 1" 270 170 4 2250
1-1/4" 40 1-1 /4" 280 180 5 3630
1-1/2" 46 1-1 /2'' 300 200 6 5280
~ rl-t--1+----t--+--:-""_"·+--
- .;.
ROO SIZE 1-3/4" TO 2-1/2"
UNIT (mm)
ROO SIZY BOLT SIZE s ALLOWABLE
(d, inch
p A B e D E F T (UNC) R-HT L-HT LOAD (Kg)
1-3/4" 52 60 120 120 43 65 15 22 1-3/4" 320 220 7120
2" 62 70 140 140 51 75 15 25 2" 320 220 9390
2-1/4" 70 75 160 150 61 80 20 28 2-1/4" 340 240 12350
2-1/2" 78 80 180 160 66 85 20 32 2-1/2" 360 260 15200
3. 2-NUTS ARE REQUIRED FOR EACH EYE BOLT

1. MATERIAL
- EYE BOL T : A36-GALV. OR EQ. 4. DIMENSION "L" IS DESIGNA TED ON THE STANDARD DWG. FOR EACH ASSEMBL Y.
- NUTS : A307 GR.8-GALV. OR EQ.
2. THREAD TYPE
R-HT : RIGHT HAND THREADED (EBTR)
L-HT : LEFT HAND THREADED (EBTL)
----------
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1011 CLEVIS BOLT CLB AO
UNIT (mm)
s
e d1BOLT~UT
ROO SIZy ALLOW
A B E F H p R T a b
(d, inch R-HT L-Hl (UN )xLxS1 LOAD(KG)
3/8" 27 50 50 25 75 14 6 6 4 3 170 110 10.5 1/2"x60x30 275
1/2º 27 50 50 25 75 18 6 6 4 3 170 110 12.5 5/8"x60x30 515
5/8" 27 50 50 25 75 22 6 6 5 3 220 140 16.5 3/4"x70x35 820
3/4" 32 55 50 30 80 26 9 9 6 4 220 140 20.5 1"x80x40 1230
1" 32 75 75 45 120 33 9 9 7 5 270 170 24.5 1-1/4"x90x50 2250
1-1/4" 35 75 75 45 120 39 9 9 8 5 280 180 30.5 1-1/2"x160x55 3630
1-1/2" 48 100 90 55 145 45 12 12 9 6 300 200 36.5 1-3/4"x80x60 5280
1-3/4" 48 100 90 55 145 52 12 12 11 6 320 220 42.5 2"x195x70 7120
2" 60 125 110 60 170 62 16 16 15 7 320 220 48.5 2-1/4"x235x75 9390
2-1/4" 65 150 125 75 200 70 16 16 17 8 340 240 56.5 2-1 /2" x250x85 12350
2-1/2" 75 180 150 90 240 78 19 19 19 10 360 260 64.5 3"x280x100 15200
lliill.
1. MATERIAL 4. DIMENSION "L" IS DESIGNATED ON Tl-IE STANDARD DWG. FOR EACH ASSEMBLY.
- CLE'v1S BOL T : A36-GALV. OR EQ.
- BOLT/NUT : A307 GR.8-GALV. OR EQ.
2. Tl-IREAD TYPE
R-HT : RIGHT HAND Tl-IREAD (CLBR)
L-HT : LEFT HAND Tl-IREAD (CLBL)
3. 2-NUTS ARE REQUIRED FOR EACH CLEVIS BOL T
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1012 STRAIGHT BOL T STB -
AO
-~---------------------~~
1: 51 .1 L 1. ~ :I
UNIT (mm)
ROO SIZE BOLT SIZE S1 S2 ALLOW.
(d, inch) (UNC) R-HT L-HT R-HT LOAD (KG)
3/8" 3/8" 170 110 50 275
1/2" 1/2" 170 110 50 515
5/8" 5/8" 220 140 50 820
3/4" 3/4" 220 140 50 1230
1· 1· 270 170 75 2250
1-1/4" 1-1/4" 280 180 75 3630
1-1/2" 1-1/2" 300 200 100 5280
1-3/4" 1-3/4" 320 220 100 7120
2" 2" 320 220 150 9390
2-1/4" 2-1/4" 340 240 150 12350
2-1/2" 2-1/2" 360 240 150 15200
.tillJ1
1. MATERIAL 4. DIMENSION "L" IS DESIGNATED ON THE STANDARD DWG. FOR EACH ASSEMBLY.
- STRAIGHT BOLT: A36-GALV. OR EQ.
- NUTS : A307 GR.8-GALV. OR EQ.
2. THREAD TYPE
R-HT : RIGHT HAND THREAD (STBR)
L-HT : LEFT HAND THREAD (STBL)
3. 4-NUTS ARE REQUIRED FOR EACH BOLT.

REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1013 TURN BUCKLE TBL AO
RIGHT HAND THR'D LEFT HAND THR'D
UNIT ( mm
ROO SIZE A B e D ALLOW LOAD
(d, inch) E (Kg)
3/8" 21 40 22 160 25 275
1/2" 21 40 22 160 25 515
5/8" 32 55 30 160 30 820
3/4" 32 55 30 160 30 1230
1· 41 65 35 200 35 2250
1-1/4" 50 80 42 200 40 3630
1-1/2" 58 90 50 200 50 5280
1-3/4" 67 105 60 200 60 7120
2· 77 120 65 200 60 9390
2-1/4" 85 130 75 200 70 12350
2-1/2" 95 140 85 200 80 15200
1. MATERIAL : A105-GALV. OR EQ
2. THREAD TYPE
R-HT : RIGHT HAND THREAD
L-HT : LEFT HAND THREAD
-------------
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1014 PIPE CLAMP PC AO
u '
1
w
+
u 1
'
s o
L
1/2" TO 3/4" 1" TO 30"
UNIT (MM)
rnf~'- AL~~~
CLAMP BODY HEX BOLT WEIGHT
NCH) A e o E G H J K p R w T Tl M d(UNC)xLxs WA (Kg)
1/2" 25 35 15 50 - - - - 14 - 32 6 - - 1/2"x45x30 335 0.4
3/4" 30 35 15 50 - - - - 14 - 32 6 - - 1/2"x45x30 335 0.4
1· 36 35 15 100 18 5 - - 14 10 32 6 - - 1/2"x45x30 460 0.5
1 112· 51 50 15 130 18 5 - - 14 10 32 6 - - 1/2"x45x30 740 0.6
2" 63 55 15 140 18 5 - - 14 10 32 6 - - 1/2"x45x30 740 0.6
2 1/2" 76 65 15 160 18 5 - - 14 10 32 6 - - 1/2"x45x30 720 0.7
3• 92 75 15 180 18 5 - - 14 10 32 6 - - 1/2"x45x30 690 0.8
4• 118 95 25 240 25 10 - - 22 10 50 9 - - 3/4"x70x35 1220 2.5
5• 146 115 25 280 25 10 - - 22 10 50 9 - - 3/4"x70x35 1220 2.9
6" 173 140 35 350 32 10 - - 26 15 75 12 - - 1"x90x45 1300 6.5
8" 225 165 35 400 32 10 - - 26 15 75 12 - - 1"x90x45 1300 7.8
10· 280 205 40 490 38 10 - - 33 20 90 16 - - 1-1 /4'x110x55 1580 15.0
12· 330 230 40 540 38 10 - - 33 20 90 16 - - 1-1 /4'x110x55 1600 16.9
14" 362 260 50 620 45 15 - - 39 25 100 19 - - 1-1 /2' xl 30x 70 1700 25.7
16" 414 285 50 670 45 15 - - 39 25 100 19 - - 1-1 /2' xl 30x 70 2290 28.0
18" 464 310 50 720 45 15 - - 39 25 100 19 - - 1-1 /2'x130x70 2950 30.3
20· 514 350 50 800 45 15 - - 39 30 125 22 - - 1-1 /2' xl 30x 70 2950 46.9
22· 566 375 50 850 45 15 - - 39 30 125 22 - - 1-1/2'x130x70 2950 50.3
24" 616 400 50 900 45 15 - - 39 30 125 22 - - 1-1/2'x130x70 2950 53.6
26" 668 440 55 990 50 20 - - 46 35 150 28 - - 1-3/4'x150x75 3560 89.1
28" 720 465 55 1040 50 20 - - 46 35 150 28 - - 1-3/4'x150x75 3310 94.3
30" 770 490 55 1090 50 20 - - 46 35 150 28 - - 1-3/4'x150x75 3090 99.4
32" 824 515 55 1140 50 20 240 955 46 40 150 16 16 180 1-3/4'x150x75 3630 95.8
34• 876 540 55 1190 50 20 240 1010 46 40 150 16 16 200 1-3/4'x150x75 4400 103.2
36" 928 570 55 1250 50 20 240 1055 46 40 150 16 16 220 1-3/4'x150x75 5000 110.2
40" 1030 620 55 1350 50 20 240 1160 46 40 150 16 16 240 1-3/4'x150x75 4500 117.2
42" 1080 645 55 1400 50 20 240 1210 46 40 150 16 16 260 1-3/4'x150x75 4500 122.8
N.QIE.
1. MATERIAL
COOE RUN PIPE CLAMP BOLT & NUT
K APl-5L GR.B, A106 GR.B A283 GR.e OR EQ. A307 GR.B OR EQ.
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
------------------~----------- --
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1015 PIPE CLAMP PC H
(FOR HOT INSULA TED PIPE) AO
PIPE
-A-
111
Cl
~S~PA~C=ER~-~d1~ ----+--~
~
' '
1 w 1
w
+ +
1 1
' '
-T±t--
Cl
TYP. 9
3/4" & SMALLER 1" TO 30" 32" & LARGER
UNIT (mm)
NOM. CLAMP BODY HEX BOLT WEIGHT ALLOW.
Pl~Esir:
INCH A B e D E G H K p R w T d1 M d2 X L X s (Kg) LOAD(Kg)
112· 25 - 100 15 115 - 5 - 14 - 32 6 112· - 1/2"x45x30 0.6 220

3/4" 30 - 100 15 115 - 5 - 14 - 32 6 112· - 1/2"x45x30 0.6 460
1· 36 110 35 15 175 18 5 - 14 10 32 6 112· - 1/2"x45x30 0.7 460
1-112· 51 135 50 15 215 18 5 - 14 10 32 6 112· - 1/2"x45x30 0.9 740
2" 63 145 55 15 230 18 5 - 14 10 32 6 112· - 1/2"x45x30 0.9 740
2-112· 76 155 65 15 250 18 5 - 14 10 32 6 112" - 1/2"x45x30 1.0 720
3• 92 165 75 15 270 18 5 - 14 10 32 6 112" - 1/2"x45x30 1.1 700
4• 118 195 95 25 340 25 10 - 22 10 50 9 3/4" - 3/4"x70x35 3.3 1220
5• 146 215 115 25 380 25 10 - 22 10 50 9 3/4" - 3/4"x70x35 3.7 1220
6" 173 260 140 35 470 32 10 - 26 15 75 9 1• - 1"x90x45 8.2 1610
8" 225 300 165 35 535 32 10 - 26 15 75 12 1· - 1"x90x45 9.6 1610
10· 289 345 205 40 630 38 10 - 33 20 90 12 h 112 - 1-1 /4'x110x55 18.0 2490
12· 330 370 230 40 680 38 10 - 33 20 90 16 h 112 - 1-1 /4'x110x55 20.1 2490
14" 362 420 260 50 780 45 15 - 39 25 100 16 h 1/2 - 1-1 /2'x130x70 30.5 2490
16" 414 445 285 50 830 45 15 - 39 25 100 19 n 112 - 1-1 /2'x130x70 33.2 2490
18" 464 470 310 50 880 45 15 - 39 25 100 19 n 112 - 1-1 /2'x130x70 35.6 3060
20· 514 520 350 50 970 45 15 - 39 30 125 19 h 1/2 - 1-1 /2'x130x70 53.7 4500
22· 566 550 375 50 1025 45 15 - 39 30 125 22 h 1 /2 - 1-1 /2'x1.JOx70 57.1 4500
24" 616 580 400 50 1080 45 15 - 39 30 125 22 h 1 /2 - 1-1 /2'x130x70 60.5 4500
26" 668 630 440 55 1180 50 20 - 46 35 150 28 2· - 1-3/4'x150x75 101.6 6400
28" 720 660 465 55 1235 50 20 - 46 35 150 28 2· - 1-3/4'x150x75 107.1 6400
30" 770 690 490 55 1290 50 20 - 46 35 150 28 2· - 1-3/4'x150x75 112.5 6400
32" 818 715 515 55 1340 50 20 955 46 40 150 16 2· 180 1-3/4"x150x75 123.1 6400
34• 876 740 540 55 1390 50 20 1010 46 40 150 16 2· 200 1-3/4'x150x75 129.1 6400
38" 928 770 570 55 1450 50 20 1055 46 40 150 16 2" 220 1-3/4'x150x75 135.7 6400
40" 1030 820 620 55 1550 50 20 1160 46 40 150 16 2· 240 1-3/4'x150x75 144.9 6400
42" 1082 845 645 55 1600 50 20 1210 46 40 150 16 2· 260 1-3/4'x150x75 151.1 6400
NOTE
1. MATERIAL
COOE RUN PIPE CLAMP BOLT & NUT
K APl-5L GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
X A312 TP304, TP316 A240 TP304 OR EQ. A193-87 /A194-2H
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
------------------------------------------------------- 1
REV.
PIPE CLAMP PCC
(FOR COLD INSULA TED PIPE) AO
URETHANE FOAM
.l ~-' - H--
<..)
BOLT /NUT
dxlxs ' .ri: ----+
Cl
UNIT (mm)
INS. THK CRADLE A (FOR EACH PIPE SIZE)
THK 1/2 3/4 1 1-1/2 2 ~-1/2 3 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30
25-50 T=50 136 136 136 163 163 192 192 224 251 274 324 392 430 474 530 578 630 678 730 778 830 870
5HOO T=100 224 236 236 251 274 279 292 324 351 374 430 492 530 578 630 678 730 778 830 870 920 970
10H5C T=150 324 336 336 351 374 392 392 430 451 474 530 578 630 678 730 778 830 870 920 970 10201070
151-20( T=200 - - - 451 474 492 492 530 548 578 630 678 730 778 830 870 920 970 10201070 1120 1170
201-25( T=250 - - - - - - - - - - 730 778 830 870 920 970 10201070 1120117012201270
251-30( T=300 - - - - - - - - - - - - - - - - 1120 11701220127013201370
UNIT (mm)
A e D G R w H p t d(UNC)xLxS tMti ~Q: Yfk~T A e D G R w H p t d(UNC)xLxS Li~n?K~ WR~~T
136 105 25 32 10 50 10 22 6 3 14"x75x55 780 0.6 678 440 60 60 30 150 20 52 22 2 x215x105 8000 31.4
163 120 25 32 10 50 10 22 6 3 4"x75x55 780 0.8 730 465 60 60 30 150 20 52 22 2"x215x105 8000 33.4
192 130 25 32 10 75 10 22 6 3 '4"x75x55 780 0.8 778 495 60 60 30 150 20 52 25 2"x215x105 8000 40.2
224 150 25 32 10 75 10 22 6 3 14"x75x55 780 1.5 830 520 60 60 30 150 20 52 25 2 x215x105 8000 41.5
236 155 25 32 10 75 15 22 9 3 '4"x75x55 780 2.3 870 540 60 60 30 150 20 52 25 2"x215x105 8000 44.8
251 160 25 32 10 75 15 22 9 3 '4"x75x55 780 2.4 920 565 60 60 30 150 20 52 25 2"x215x105 8000 47.0
274 190 40 38 15 90 15 33 12 H 4"x100x55 3100 4.4 970 595 60 60 35 150 20 52 28 2"x240x125 8000 55.4
279 195 40 38 15 90 15 33 12 1-1 4"x100x55 3100 4.6 1020 620 60 60 35 150 20 52 28 2"x240x125 8000 58.0
292 200 40 38 15 90 15 33 12 1-1 4"x100x55 3100 4.7 1070 645 60 60 35 150 20 52 28 2"x240x125 8000 60.6
324 220 40 38 15 90 15 33 12 1-1 4 x100x55 3100 5.2 1120 670 60 60 35 150 20 52 28 2"x240x125 8000 63.1
336 230 40 38 15 90 15 33 12 1-1 4"x100x55 3100 5.5 1170 700 60 60 40 150 20 52 32 2"x240x125 8000 75.3
351 250 50 45 20 100 15 39 16 1-1 2"x120x65 4500 8.6 1220 725 60 60 40 150 20 52 32 2"x240x125 8000 78.2
374 260 50 45 20 100 15 39 16 1-1 2"x120x65 4500 9.0 1270 750 60 60 40 150 20 52 32 2"x240x125 8000 81.2
392 270 50 45 20 100 15 39 16 1-1 2"x120x65 4500 9.3 1320 775 60 60 40 150 20 52 32 2 x240x125 8000 84.1
430 290 50 45 20 100 20 39 16 1-1 2"x120x65 4500 9.9 1370 800 60 60 40 150 20 52 32 2 x240x125 8000 87.0
451 310 55 55 25 125 20 46 19 1-3 4"x150x85 5800 15.9
474 320 55 55 25 125 20 46 19 1-31 4"x150x85 5800 16.5
492 330 55 55 25 125 20 46 19 1-3 4"x150x85 5800 17.1
530 350 55 55 25 125 20 46 19 1-3 4"x150x85 5800 17.9
548 360 55 55 25 125 20 46 19 1-31 4"x150x85 5800 18.5
578 390 60 60 30 150 20 52 22 2 x215x105 8000 27.4
630 415 60 60 30 150 20 52 22 2"x215x105 8000 29.4
NOTE
1. MATERIAL
- CLAMP : A36 OR EQ.
- BOL T & NUT : A307 GR.B OR EQ.
~----------------------------------------------------~-~-~-
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1017 RISER PIPE CLAMP
(FOR LIGHT \llEIGHT)
RC -
AO
PIPE SPACER-d1
-~-
"-f"
L
-:n-~-
C>
fr
r;.:~
... .,,.
R ' t::I..... -..:,
,_~
1
'\ :z
i' u
--r--
1 1
-1----: ---- t- -,_____ Lo.J
1
!
'\
!
u
:z
U-
Plf'( SPAO'R-d1 ~
~ ~
~ ="!
- +<! ~
-......:: ~
p ~ "O +Ci
1-
C>
_11.G
UNIT (mm)
PlrE sw
NOM.
INCH A e D E
CLAMP BODY
G H N p R s T d1
BOLT
d(UNC)xLxs
\llEIGHT
(Kg)
ALLOW.
LOAD
(Ka)
3" 92 85 25 540 25 10 245 22 10 50 9 3/4" 3/4"x70x35 5.1 350
4" 118 105 35 600 32 10 265 26 15 75 12 1· 1"x90x45 10.9 600
5• 146 125 35 660 32 10 295 26 15 75 12 1· 1"x90x45 11.8 600
6" 173 155 40 700 38 10 310 33 20 90 16 1 112· H /4"x110x55 20.5 1100
8" 225 180 40 830 38 10 375 33 20 90 16 1 1/2" H /4'x110x55 24.1 1290
10· 280 220 50 920 45 15 410 39 25 100 19 1 1/2" H /2'x130x70 36.4 1590
12" 330 245 50 970 45 15 435 39 25 100 19 1 1/2" 1-1 /2"x130x70 38.7 2010
14" 362 270 50 1000 45 15 450 39 30 125 22 1 1/2" H /2"x130x70 55.3 2010
16" 414 295 50 1080 45 15 490 39 30 125 22 1 1/2" H /2'x130x70 60.0 2500
18" 464 335 55 1140 50 20 515 46 35 150 28 2· 1-3/4'x155x75 96.9 2310
20· 514 360 55 1190 50 20 540 46 35 150 28 2· 1-3/4'x155x75 101.9 2500
24" 616 430 55 1290 60 20 590 52 40 150 32 2· 2"x175x75 134.6 3610
26" 668 460 55 1340 60 20 615 52 40 150 32 2" 2"x175x75 140.5 3610
28" 720 490 55 1400 60 20 645 52 40 150 32 2" 2"x175x75 147.2 4950
30" 770 515 55 1450 60 20 670 52 40 150 32 2" 2"x175x75 153.0 4950
NOTE
1. MATERIAL
CODE RUN PIPE CLAMP BOLT & NUT

y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
w A335 P22 A387 GR.22 OR EO. A193-B7 /A194-2H
REV.
RISER PIPE CLAMP RCH
(FOR HEA VY YtrlGHT) AO
~ 1
PIPE SPACER-d1 11 ' 11
:z
u
:z
PIPE SPACER-d1
UNIT (mm)
NOM. CLAMP BODY HEX.BOLT WEIGHT ALLOW. LOAD IKa)
PIPE SIZE
(Kg) c.s
(INCH) A e D E G H N p R s T T1 w z d1 d(UNC)xlxs A.S
3• 92 85 25 600 25 10 275 22 10 75 9 6 25 30 3¡.4• 3/4"x70x35 10.9 550 370
4• 118 105 35 660 32 10 295 26 15 100 12 6 35 40 1· 1"x90x45 20.2 600 410
5• 146 125 35 700 32 10 315 26 15 100 12 6 35 40 1· 1"x90x45 21.4 600 410
6" 173 155 40 760 38 10 340 33 20 125 16 9 45 55 11/2. 1-1 /4"x110x55 41.0 1100 750
8" 225 180 40 890 38 10 405 33 20 125 16 9 45 55 1112. 1-1 /4" x110x55 48.3 2400 1650
10· 280 220 50 980 45 15 440 39 25 150 19 12 55 70 11/2. 1-1/2"x130x70 80.0 3200 2200
12· 330 245 50 1030 45 15 465 39 25 150 19 12 55 70 11/2. 1-1/2"x130x70 84.9 3200 2200
14" 362 270 50 1060 45 15 480 39 30 175 22 16 65 80 11/2. 1-1 /2"x130x70 123.9 3700 2550
16" 414 295 50 1120 45 15 510 39 30 175 22 16 65 80 11/2. 1-1 /2"x130x70 131.5 3700 2550
18" 464 335 55 1200 50 20 545 46 35 200 28 19 75 95 2· 1-3/4"x155x75 200.2 4120 3030
20· 514 360 55 1250 50 20 570 46 35 200 28 19 75 95 2· 1-3/4"x155x75 208.9 4450 3790
24" 616 430 60 1360 60 20 620 52 40 250 32 22 100 120 2· 2"x180x85 333.7 7260 3790
26" 668 460 60 1410 60 20 645 52 40 250 32 22 100 120 2· 2"x180x85 344.8 7390 7460
28" 720 490 60 1470 60 20 675 52 40 250 32 22 100 120 2· 2"x180x85 358.2 9300 9390
30" 770 515 60 1520 60 20 700 52 40 250 32 22 100 120 2· 2"x180x85 368.9 9300 9390
!iQ1l
1. MATERIAL
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
----------------------------------------·------------
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1019 CRADLE CRD
(FOR COLD INSULA TED PIPE) AO
SlRUCTURAL CRADLE
_ _j_ SEAL PLATE 0.7 t A240 - 304 UNIT (mm)
Ll:WA:J ¡ ~CO-LD-IN_S_U-LA_Tl_ON_TH_'_K·-·r-.~2-5---50-51---10-0~1-01---15-0~15-1--2-00~2-0-1--250-2-51--3-00
1+ ¡
1(
- ::
~'"\e
r;r;;r
CRADLE TH'K H=50
~~-l~-~-+--r---+-L--+_u-+--------R~--------+
H=100 H=150 H=200 H=250 H=300
~1~/_2~·f--'1~1-+-3=7~0-+-'3~10........~6~1---+~11~1-+~1=61~1-----+----+---~
r3~lf_4~·1---'1~4-+-3=7~0-+---'3~10=-+~6~4---1~11~4-+~1~64~t-----+----+---~
1
\;~[\ ~~~º- :1-~ =·l'.:2=~~:~:=~:;:~:~~::~:::~:~===1:~:~=::::~~~=::2;:5=:=====:====:
<n.<
2· 31 370 310 81 131 181 231
2-112 37 370 310 87 137 187 237
1O" & SMALLER 3• 45 420 360 95 145 195 245
4• 58 420 360 108 158 208 258
5• 72 420 360 122 172 222 272
6" 85 420 360 135 185 235 285
8" 110 420 360 160 210 260 310 350
10· 137 420 360 187 237 287 337 387
12" 162 420 360 212 262 312 362 412
14" 178 420 360 228 278 328 378 428
16" 204 420 360 254 304 354 404 454
18" 229 420 360 279 329 379 429 479
20· 254 420 360 304 354 404 454 504 554
SlRUCTURAL CRADLE
22· 280 420 360 330 380 430 480 530 580
,_.....~'! RANn
SlRUCTURAL CRADLE 24" 305 420 360 355 405 455 505 555 605
____¡ .......=2~6·-+-=3~31-+-4~2=0-+-'3=6º=-+-~3~81---+~43~1-+_4=8~1-+-~53=1--t_5=8~1-+-~6~31---+
··111·· 28" 356 420 360 406 456 506 556 606 656
30• 381 420 360 431 481 531 581 631 681
32" 407 420 360 457 507 557 607 657 707
34• 432 420 360 482 532 582 632 682 732
36" 458 420 360 508 558 608 658 708 758
,:::::::::::::>:-:::º
40" 508 420 360 558 608 658 708 758 808
STEEL BANP ¡-- 534 420 360 584 634 684 734 784 834
0.5 A240 - 304/
44• 559 520 460 609 659 709 759 809 859
SEAL PLATE 0.7 A240 - 304 48" 610 520 460 660 71 o 760 81 o 860 91 o
54'
52"
661 520 460 711
686 520 460 736
761
786
811
836
861
886
911
936
961
986
60" 762 520 460 812 862 912 962 1012 1062
12" TO 60"
NQIE.
1. MATERIAL
- URETHANE FOAM : SEE DWG.NO. ST-M-1022
- SlRUCTURAL CRADLE : A283 GR.C OR EQ. WjHOT DIP GAL'V
- STRUCTURAL CRADLE TH'K : SEE TABLE OF ST-A4-1104
PIPING SUPPORT ATTACHMENT DWG. ST-A4-1020 URETHANE BLOCK

(FOR COLD INS.)
uRB REV.
AO
TRUNNION "D"
RIGID URETHANE FOAM
NON-ASBESTOS SHEET
4~ h HOLES ~
90·
G
DETAIL FOR BOL T/NUT
UPPER PLATE
¡
..1. 2
.1.. ¡
BASE PLATE
UNIT (mm)
NOM. BOLT/NUT ALLOW. LOAD
Pl(E SIYE TRUNNION
(D)
A1 A2 B T t h p
s (kg)
INCH d(UNC) 1
1-1 /2" 1" 140 170 90 12 6 12.5 14 1 /2'' 120 30 980

2" 1-1 /2" 140 170 90 12 6 12.5 14 1 /2" 120 30 980
3• - 4• 2· 140 170 90 12 6 12.5 14 1 /2" 120 30 980
5" - 8" 4• 160 190 120 16 9 16.5 18 5/8" 130 44 1920
10· 6" 210 240 160 16 12 16.5 18 5/8" 130 44 1920
12"-14" 8" 260 290 200 19 12 20.5 22 3/4" 140 52 3340
16"-18" 10· 320 350 250 19 12 20.5 22 3/4" 140 52 3340
20" -24" 12" 350 380 280 19 12 20.5 22 3 /4" 140 52 3340
26" -28" 14" 400 430 320 19 12 20.5 22 3 /4" 140 52 3340
30" 16" 450 480 360 22 16 24.5 26 1" 140 66 4340
36" 18" 500 530 400 25 22 30.5 32 h-1 /8" 160 84 7340
.t:!.QIE_
1. MATERIAL
- DENSITY OF U/F FOR ANCHOR : 500 Kg/m' (URSA)
- DENSITY OF U/F FOR RESTING : 320 Kg/m' (URBR)
- BASE PLATE : A36 OR EQ.
- BOLT/NUT: A320 B8/A194 Gr.4
- UPPER PLATE : SAME AS TRUNNION MATERIAL
PIPING SUPPORT ATIACHMENT DWG. ST-M-1021

URETHANE BLOCK
(FOR SUPPORT CLIP)
uR8V REV.
AO
4-MACHINE BOLT
.,
·······-······-··················-
·.:-.:·.:-.:·.;·.;•,;·.;·.:·.:·.;·..;·_
DETAIL FOR BOLT/NUT
NON-ASBESTOS SHEET
15 .. llll .. t
SECTION
UNIT (mm)
CLIP #121, #122A/B
CLIP LOADING U IF PLATE BOLT /NUT Q'TY
GJ:=-~~w
el c2 p (package)
MARK POINT bl h b2 g1 g2 t d(UNC) s 1
1121 A 200 240 190 80 250 9 5/8" 50 140 100 140 18 1 SET
1122A A
A
200 280 190 80 290 9 5/8" 50 140 100 180 18 /,)'
~/
'6122B 200 330 190 80 340 9 5/8" 50 140 100 230 18
A 200 330 190 83 343 12 5/8" 50 140 100 230 18 2 SET
#123A
B 280 320 270 83 373 12 5/8" 50 140 180 220 18 CLIP #123A/B/C
A 200 380 190 83 393 12 3/4" 50 140 100 280 21
#123B
0:::·~
B 280 390 270 83 403 12 3/4" 50 140 180 290 21
A 200 400 190 83 493 12 1· 60 145 100 380 26
#123C
B 280 530 270 83 543 12 1· 60 145 180 430 26 "-, ·,, *w
#124A
A
B
200 330 190
280 320 270
83
83
343
333
12
12
5/8" 50
5/8" 50
140 100 230
140 180 220
18
18
8=~
A 200 380 190 83 393 12 3/4" 50 140 100 280 21 CLIP #124A/B/C
#124B
B 280 390 270 83 403 12 3/4" 50 140 180 290 21
A 200 480 190 83 493 12 1· 60 145 100 380 26
#124C
B 280 530 270 83 543 12 1· 60 145 180 430 26
!illIE.
1. MATERIAL
- DENSITY OF U/F : 500 Kg7m
- PLA TE : A240-304 OR EQ.
- BOLT/NUT: A320 B8/A194 GR.4 OR EQ.
·---------------- - - - - - - - - - - - - - - - ··------ -
REV.
PIPING SUPPORT ATIACHMENT OWG. ST-A4-1022 U/F PROPERTY - AO
MECHANICAL[PHYSICAL PROPERTY OF POL YURETHANE FOAM
DENSIT'r' (Kg/M')
ITEM UNIT REMARKS
320 500
ULTIMA TE COMPRESSIVE STRENGTH Kg/CM 2 70.4 170
COMPRESSIVE STRENGTH AT 1% DEFLECTION Kg/CM' 14.2 33
BENDING STRENGTH Kg/CM' 90 200
THERMAL CONDUC11\1T'r' Kcal/Mhr'C 0.065 0.084
COEFFICIENT OF THERMAL CONTRACTION cm/cm'C 5ox10-• 50x10-•
NON-INFLAMMABILIT'r' SE SE
CLOSED CELL CONTENT BY VOLUME % 90 90
CRADLE FIXED
APPLICATION -
SUPPORT SUPPORT
SE - SELF EXTINGUISH
--------~-----------~-----------
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1023(1/4)

ADJUST STANCHION ADS REV.
(ONE BOL T WITH THREAD COUPUNG TYPE) AÜ
F ~
<(
_J
Q..
~K HOLE FOR ROTATION
PIPE-STRAIGHT
8-THREADS
COUPUNG
UNIT (mm)
Pl~{~ZE s¿igrui~I DA B e D 01 F H J X
•
n ~K L T ~ p a
ALLOW.
LOAD (Kg)
·o·
1-112· 3• 140 35 100 1" SCH.160 90 100 25 1-1 /4"x8 16 140 12 38 6 500
2· 3• 140 35 100 1" SCH.160 90 100 25 1-1 /4"x8 16 140 12 38 6 500
3• 3• 140 35 100 1" SCH.160 90 100 25 1-1 /4"x8 16 140 12 38 6 500
4• 3• 140 60 140 2" SCH.160 120 140 30 2-1/4"x8 30 180 14 64 6 1000
6" 4• 160 60 140 2" SCH.160 120 140 30 2-1/4"x8 30 180 14 64 6 1800
8" 4• 160 60 140 2" SCH.160 120 140 30 2-1 /4"x8 30 180 14 64 6 1800
10· 6" 210 90 180 3" SCH.160 150 180 40 3-3/8"x8 36 220 16 94 9 4000
12" 8" 260 90 180 3" SCH.160 150 180 40 3-3/8"x8 36 220 16 94 9 4500
14" 8" 260 90 180 3" SCH.160 150 180 40 3-3/8"x8 36 220 16 94 9 4500
16" 10· 320 115 215 4" SCH.160 180 200 40 4-3/8"x8 50 250 20 118 9 5000
18" 10· 320 115 215 4" SCH.160 180 200 40 4-3/8"x8 50 250 20 118 9 5000
20· 12" 350 115 215 4" SCH.160 180 200 40 4-3/8"x8 50 250 20 118 9 5000
24" 12· 350 115 215 4" SCH.160 180 200 40 4-3/8'x8 50 250 20 118 9 5000
NOTE
1. USE THIS SUPPORT ON PUMP SUCTION ANO DISCHARGE UNE.

2. MATERIAL
- TRUNNION : SAME AS RUN PIPE MATERIAL OR EQ.
- COLUMN : API 5L GR.B OR EQ.
- COUPUNG : A36 OR EQ.
- PLA TE : A283 GR.C OR EQ.
- - - - - - - - - --------·----------
REY.
PIPING SUPPORT ATIACHMENT DWG. ST-M-1023(2/ 4) ADJUST STANCHION ADS
(FOUR BOL T TYPE) AO
•a· EQUAL THE

a TRUNNION WALL TH'K a
BASE PLA TE DETAil
5~ VENT HOLE 5~ VENT HOLE
B
A
.1
(UNIT : MM)
PIPE SIZE ALLOW. l'IEIGHT

(D) LOAD (KG) 01 A B h T d L s (KG) REMARK
1-1 /2" 2000 1-1/2" 140 90 18 6 5/8" 75 65 5.5

2" 2000 1-1 /2" 140 90 18 6 5/8" 75 65 5.9
2-1/2" 2000 2" 140 90 18 6 5/8" 75 65 6.2
3• 2000 2" 140 90 18 6 5/8" 75 65 6.24
3-1/2" 2000 2· 140 90 18 9 5/8" 75 65 8.59
4• 2000 2· 140 90 18 9 5/8" 75 65 8.63
5• 2000 4" 160 120 18 9 5/8" 75 65 13.2
6" 2000 4" 160 120 18 9 5/8" 75 65 13.4
8" 2000 6" 210 160 18 12 5/8" 75 65 23.99
10" 2000 6" 210 160 18 12 3/4" 75 65 41.3
12" 3000 8" 260 200 22 12 3/4" 85 75 71.0
14" 3000 8" 260 200 22 12 3/4" 85 75 72.7
16" 3000 10" 320 250 22 14 3/4" 85 75 86.4
18" 3000 10· 320 250 22 14 3/4" 85 75 117.4
20· 3000 12· 350 280 22 16 3/4" 85 75 118.7
22" 3000 12· 350 280 22 16 3/4" 85 75 120.8
24" 3000 12" 350 280 22 16 3/4" 85 75 122.3
NOTE
2. MATERIAL
- PLATE : A36 OR EQ.
- BOLT/NUT : A307 GR.B v.1TH GALVANIZED OR EQ.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1023(3/4) ADJUST ST ANCHION AD s REV.

(ONE BOL T TYPE) AO
•e" EQUAL THE

TRUNNION WALL TH'K e
50 VENT HOLE 5~ VENT HOLE
.·.: .
(UNIT: t.lt.I)
PIPE SIZE ALLOW. WEIGHT
(D) LOAD (KG) 01 A e p T d L s (KG) REt.IARK
1-1/2" 722.7 1-1 /2" 140 70 26 6 1· 140 120 5.2

2" 722.7 1-1/2" 140 70 26 6 1· 140 120 5.5
2-1 /2" 722.7 2" 140 70 26 6 1· 140 120 5.8
3" 722.7 2" 140 70 26 6 1· 140 120 5.84
3-1 /2" 1147.2 2" 140 85 33 6 1-1 /4" 165 135 7.8
4" 1147.2 2· 140 85 33 6 1-1/4" 165 135 7.83
5" 1147.2 4• 160 85 33 9 1-1/4" 165 135 12.1
6" 1147.2 4" 160 85 33 9 1-1/4" 165 135 12.42
8" 2923.9 6" 210 100 52 9 2" 180 150 22.2
10· 2923.9 6" 210 100 52 12 2' 180 150 38.3
12" 5156.7 8" 260 120 70 12 2-1/2" 210 175 66.8
14" 5156.7 8" 260 120 70 12 2-1 /2" 210 175 67.6
16" 5156.7 10" 320 120 70 12 2-112' 210 175 80.1
18" 6424.2 10" 320 140 78 12 2-3/4" 240 200 107.9
20· 6424.2 12" 350 140 78 12 2-3/4" 240 200 109.2
22" 6424.2 12· 350 140 78 12 2-3/4" 240 200 113.3
24" 6424.2 12" 350 140 78 12 2-3/4" 240 200 112.8
1. USE THIS SUPPORT ON PUt.IP SUCTION ANO DISCHARGE UNE.

2. MATERIAL
- BOLT/NUT : A307 GR.B ~TH GALVANIZED OR EQ.
REV.
PIPING SUPPORT ATIACHMENT OWG. ST-A4-1023( 4/4)
ADJUST STANCHION ADS
(FOUR BOLT TYPE WllH URElHANE FOAM) AO
4-P~ (PLA TE "a")
•-hfti:B
"a" EQUAL lHE
TRUNNION WALL lH'K a
PLATE 'a" & "b" DETAil
1- 1-
5~ VENT HOLE 5~ VENT HOLE
B
.... A .1
(UNIT: MM)
PIPE SIZE ALLOW. WEIGHT
(D) LOAD (KG) 01 A B T h d L s (KG) REMARK
AJA-1-1 /2" 2000 1-1 /2'' 140 90 6 18 5/8" 75 65 2.65

2· 2000 1-1 /2" 140 90 6 18 5/8" 75 65 3.05
2-1/2" 2000 2· 140 90 6 18 5/8" 75 65 3.67
3• 2000 2" 140 90 6 18 5/8" 75 65 4.05
3-112· 2000 2· 140 90 9 18 5/8" 75 65 4.43
4• 2000 2" 140 90 9 18 5/8" 75 65 5.03
5• 2000 4" 160 120 9 18 5/8" 75 65 6.15
6" 2000 4• 160 120 9 18 5/8" 75 65 7.5
8" 2000 4• 160 120 12 18 5/8" 75 65 13.1
10· 2000 6" 210 160 12 18 5/8" 75 65 18.7
12· 3000 8" 260 200 12 22 3/4" 85 75 25.1
14" 3000 8' 260 200 12 22 3/4" 85 75 29.2
16" 3000 10' 320 250 14 22 3/4" 85 75 34.8
18" 3000 10" 320 250 14 22 3/4" 85 75 39.7
20" 3000 12· 350 280 16 22 3/4" 85 75 42.1
22" 3000 12" 350 280 16 22 3/4" 85 75 44.8
24" 3000 12" 350 280 16 22 3/4" 85 75 47.5

2. MATERIAL
- BOLT/NUT : A307 GR.B WITH GALVANIZED OR EQ.
~~---------------· ----------~--- ---- -- -

STANDARD PIPE SUP,PORT, 3607 /32-SD-5100
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1024 FIXED BAND
(FOR \11BRA TION UNE)
FBD
AO
100
1mm THICK
NON-ASBESTOS SHEET
BONOED TO CLAMP/PLATE
2-NUTS
.. 18ol ..
1_1. p
e
:I:
e
p
ril
BOLT SIZE d1 d2
5/8" 18 30
3/4" 22 37
1· 26 44
45·
DETAIL FOR BOL T SPRING WASHER
UNIT (mm)
NOM. O.O BOLT/NUTS WEIGHT
PIPE SIZE OF
DIDC
R e p H b X t g L K t1 r d(UNC)xlxs (kg)
1-1 /2" 48.3 25.5 62 87 13 100x6 60 - - - 6 5/8"x80x50 3.5
2" 60.3 31.5 68 93 19 100x6 60 - - - 6 5/8"x80x50 5.0
2-1 /2" 73.0 38 82 107 25 125x9 80 - - - 9 3/4"x90x55 6.9
3• 88.9 45.5 89 114 33.5 125x9 80 24 58 9 9 3/4"x90x55 7.3
4• 114.3 58.5 101 126 46 125x9 80 37 57 9 9 3/4"x90x55 8.3
5• 168.3 85.5 132 157 73 125x12 80 61 58 12 9 3/4"x90x55 11.5
5· 219.1 111 155 180 98.5 125x12 80 86 55 12 9 3/4"x90x55 13.8
10· 273.1 138 185 210 125.5 150x12 85 113 58 12 9 3/4"x90x55 19.0
12· 323.9 164 210 235 150 150x12 85 138 57 12 9 3/4"x90x55 21.7
14" 355.6 180 235 260 166 150x12 85 154 66 12 9 1"x100x65 25.4
16" 406.4 205.5 260 285 191 150x12 85 179 66 12 9 1"x100x65 28.1
NOTE
1. MATERIAL
- FIXED BAND : A36 OR EQ.
- BASE PLATE : A36 OR EQ.
- WASHER : A36 OR EQ.
- BOL T/NUT : A307 GR.B OR EQ.
- BUFFER : NON-ASBESTOS SHEET

FIXED BAND FB os REV.
(FOR VIBRA TION UNES) AO
1mm THICK
· 1 NON-ASBESTOS SHEET
--~--•-i¡ BON DEO TO CLAMP /PLA TE 6
d1 o
N
RETAINER
BOLT SIZE "d" di do

45· 45·
BOLT SIZE "d" o E F 5/8" 18 30
1" 70 48 26 3/4" 22 37
BOLT FOR SPRING DETAIL FOR BOL T
1-1/4" 120 80 33 1" 26 44
UNIT (mm)
NOM. O.O BOLT/NUTS WEIGHT
PIPE SIZE
OF R C1 C2 P1 P2 H b X t g f L K1 K2 t1 r (kg)
DIO<" d1(UNC)xZ1 d(UNC)xlxs
1-1/2" 48.3 25.5 95 75 135 100 13 120x9 65 85 - - - - 9 l"x220 5/8"x80x50 5.5
2" 60.3 31.5 100 80 140 105 19 120x9 65 85 - - - - 9 1"x220 5/8"x80x50 9.2
2-1/2" 73.0 38 105 90 145 115 25 120x9 65 85 - - - - 9 1"x220 3/4"x90x55 11.7
3• 88.9 45.5 115 95 155 120 33.5 120x9 65 85 24 90 55 9 9 l"x220 3/4"x90x55 12.6
4• 114.3 58.5 125 110 165 135 46 120x9 65 85 37 87 57 9 9 1"x220 3/4"x90x55 13.5
6" 168.3 85.5 180 140 240 165 73 180x12 100 150 61 132 57 12 9 1-1/4"x250 3/4"x90x55 35.3
8" 219.1 111 205 165 265 190 98.5 180x12 100 150 86 132 57 12 9 1-1 /4"x250 3/4"x90x55 38.8
10" 273.1 138 230 195 290 220 n25.5 180x12 100 150 113 130 60 12 9 1-1 /4"x250 3/4"x90x55 42.3
12" 323.9 164 255 220 315 245 150 180x12 100 150 138 129 59 12 9 1-1/4"x250 3/4"x90x55 45.9
14" 355.6 180 275 235 335 260 166 180x12 100 150 154 133 58 12 9 1-1 /4"x250 1"x100x65 49.2
16" 406.4 205.~ 300 265 360 290 191 180x12 100 150 179 133 62 12 9 1-1 /4"x250 1"x100x65 52.5
18" 457.2 231 325 290 385 315 t216.5 180x12 100 150 204 134 62 12 9 1-1 /4"x250 1"x100x65 56.3
20" 508.0 257 350 315 410 340 241 180x12 100 150 229 134 61 12 9 1-1/4"x250 1"x100x65 60.0
22· 558.8 ?82.' 375 340 435 365 1261.5 180x12 100 150 254 133 63 12 9 1-1/4"x250 1"x100x65 63.4
24" 609.6 308 400 365 460 390 292 180x12 100 150 280 133 60 12 9 1-1/4"x250 1"x100x65 65.5
NOTE
1. MATERIAL 2. SPECIFICA TION OF SPRING
- FIXED BAND : A36 OR EQ. UNIT (mm)
- BASE PLA TE : A36 OR EQ. SPRING COIL v.lRE
PIPE FREE MAX.
-
-
RETAJNER
WASHER
: A36 OR EQ.
: A36 OR EQ.
SIZE '~qA/~
k mmi) o.o o.o HEIGHT OEFLECTION
- SPRING : A229 CL.1 OR EQ. 1•N4• 8 60 10 135 40
- BOLT/NUT : A307 GR.B OR EQ. 6"N12· 24 100 18 158 40
- BUFFER : NON-ASBESTOS SHEET 14"N18" 24 100 18 158 40
20"N24" 24 100 18 158 40
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1026 EYE ROD ERO AO
~
SECTION A-A
ROO SIZE 1-1/2" & SMALLER

UNIT (mm)
f<OO SIZ~ p a b
ALLOWABLE
d, inch LOAD (Kg)
3/8" 14 3 3.5 275
1/2" 18 3 3.5 515
5/8" 22 3 4.5 820
3/4" 28 3 5.5 1230
1· 34 4 7 2250
1-1/4" 40 5 9 3630
1-1/2" 46 6 10 5280
~ ~H---!-+t---}---------f--{--1---!-++~
ROO SIZE 1-3/4" TO 2-1/2"
UNIT (mm
ROD SIZE ALLOWABLE
(d, inch) p A B e D E F T a b LOAD (Kg)
1-3/4" 52 60 120 120 45 65 15 22 7 8 7120
2" 62 70 140 140 51 75 15 25 9 10 9390
2-1/4" 70 75 160 150 61 80 20 28 10 11 12350
2-1/2" 78 80 180 160 66 85 20 32 11 12 15200
NOTE
1. MATERIAL
- EYE ROD : A36-GALV. OR EQ.
2. DIMENSION "L" IS DESIGNATED ON THE STANDARD DWG. FOR EACH ASSEMBLY.
·~--------'--------------~----------·-·-··
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1027 PLAIN WASHER PW
AO
r
1
'
1
'
----~---- o
1
'
1
'
UNIT (MM'
ROO SIZE WEIGHT

(inch) d o T
(kg)
3/8" 11 21 2.0 0.004

1/2" 14 24 2.3 0.006
5/8" 18 30 3.2 0.012
3/4" 22 37 3.2 0.018
1· 25 44 4.5 0.035
1-1/4" 33 56 4.5 0.057
1-1/2" 39 66 6.0 0.105
1-3/4" 45 78 7.0 0.175
2" 52 92 B.O 0.234
2-1/4" 62 105 9.0 0.399
2-1/2" 70 115 9.0 0.463
1. MATERIAL
- PLAIN WASHER : A36-GALV. OR EQ.
------··--··-··------

ADJUSTABLE SPRING 'M:DGE ASW REV.
(FOR V1BRATION UNE) AO
PLAIN WASHER
SELF LOCKING NUT \ COt.4PRESSION COIL SPRING

1§-
OR ADD LOCK NUT
ENDS TO BE FREE OF
EXTERNAL BURRS
UNIT (mm)
PIPE SIZE BOLT/NUTS PIPE SIZE BOLT/NUTS

NPS "p" A B e h¡l
d(UNC)x!xjxk
D NPS •p• A B e hll
d(UNC)xlxjxk
D
2" 120 180 30" 240 370 1"x61Ox190x80

3" 120 180 14 1/2" x300x100x60 35 32" 240 370
4• 120 180 34• 265 395
6" 140 210 36" 265 395
3/4"x350x130x60
8" 140 210 150 38" 265 395
10· 200 270 40" 265 395 230 27 1"x660x190x80 64
22
12· 200 270 3/4"x470x130x70 51 42" 265 395
14" 200 270 44• 265 395
16" 220 290 46" 265 395
18" 220 290 ,_____ 3/4"x510x130x70 48" 290 420
20" 220 290 230 50" 290 420
24" 240 370 52" 290 420 1" x710x190x80
27
26" 240 370 1"x61Oxl90x80 64 54" 290 420
28" 240 370 60" 290 420
SPECIFICA TION OF COIL SPRING UNIT (mm)

t.41N. LOAD FULLY SPRING
PIPE SIZE DEFLECTION
TO SOLIO COt.4PRESSED s~;;NG t.4AX. t.4AX.
HEIGHT (Kg) fk~ ;:;:m) O.O t.41N l.D FREE
H·~lf.HT
2• N4" 25 205 8.2 27 13 64
6" N20" 50 730 29.2 76 40 152
24" 60' N 102 1230 24 102 52 254
NQJI
1. MATERIAL
- BOLT/NUT : A307 Gr.8-GALV. OR EQ., 'MTH SELF LOCKING NUT
- PIPE : API 5L Gr.8 OR EQ.
- PLAIN WASHER : A36 GALVANIZED OR EQ.
'·--··---··· - - - · - - - - -
REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1030 BEAM CLAMP ae AO
A
H
~ ;XISTING s1m
--¡--
w
i
---tp---
PIPE SPACER-d1 u
i
i
d
,_~
BOLT dxLxs o
BOL T HOLE 2-h\l!
UNIT (mm)
EXIST BEAM A BOLT & NUT ALLOW. LOAD
B e D E F G g h t
d XL X s (Kg)
d1
SIZE (H) MIN MAX
BC-100 110 125 50 70 25 100 35 25 15 21 6 3/4"x70x50 820 3/4"
125 135 150 60 70 25 100 45 25 18 21 6 3/4"x70x50 820 3/4"
150 160 175 60 80 25 110 55 25 20 21 9 3/4"x80x50 820 3/4"
175 185 200 70 90 35 120 65 32 23 21 9 1"x90x60 1230 1·
200 220 235 80 110 40 130 75 38 25 28 9 1-1/2'x100x70 2250 1-1/2"
250 270 285 100 130 50 150 95 45 30 41 12 1-1/2'x120x70 3630 1-1/2"
300 320 335 110 150 55 170 115 50 35 54 12 2"x130x80 7120 2"
400 420 435 110 160 55 200 155 50 45 54 12 2"x130x80 7120 2·
NOTE
1. MATERIAL
- PLATE A36 GALVANIZED OR EQ.
- BOLTjNUT A307 GR.B-GALV. OR EQ.
- SPACER API 5L GR.B OR EQ.
'-------------------------------------------------------
BASE PLA TE ANO REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1031 (1 OF 2) EXPANSION ANCHOR BOLT BPL
(ANCHOR TYPE)
4-\ldh HOLES TRUNNION "Q"

TRUNNION "Q"
4-EXPANSION
ANCHOR BOLTS •J"
EL.30
MEMBER "M"
4-\ldh HOLES MEMBER "M"
4-EXPANSION
ANCHOR BOL TS •J"
'
1
'
---+-'
EL.30
B
A 1.1
BASE PLATE DETAIL
UNIT (mm)
TRUNNION BASE PLATE
PIPE SIZE NPS "Q" UNIT (mm)
A B t \ldh J
1-1;2· 1" 140 90 6 20 1;2· MEMBER BASE PLATE
"M" A B t \ldh J
2· 1-1;2· 140 90 6 20 1;2·
3• 2" 140 90 1;2· A5 180 120 6 20 1/2"
6 20
4• 2" 140 1;2· A6 180 120 6 20 1/2"
90 6 26
6" 4• 160 120 9 26 5/8" A7 180 120 6 20 1/2"
8" 4" 160 120 9 26 5/8" A10 260 180 9 26 5/8"
10" 6" 210 160 12 31 3/4" ClO 260 180 9 31 3/4"
12",14" 8" 260 200 12 31 3/4" C12 260 180 9 31 3/4"
16",18 10" C15 300 230 9 31 3/4"
320 250 12 31 3/4"
20· 24" 12" 350 280 12 31 3/4"
NOTE
1) MATERIAL
- EXPANSION ANCHOR BOLT: A325-GALV. OR EQ.
2) REQUIRED MIN. BASE CONCRETE TH'K(h) SHOULD BE INFORMED TO

CIVIL ENGINEIR FOR PAVING DESIGN.
BASE PLA TE ANO B pLA REV.
PIPING SUPPORT ATIACHMENT DWG. ST-M-1031 (2 OF 2) EXPANSION ANCHOR BOLT
(ANCHOR TYPE) AO
--------
dh DESIGN APPUCA TION OF ANCHOR BOLT
Anchor Bol! Size (J)

1/2" 5/8" 3/4"
Shear stress area (mm') A¡, 84 157 245
Min. spacing between anchors (mm) Smin 85 102 129
Min. base concrete th'k (mm) h.nin 160 180 220
Min. edge distonce (mm) Cmin 250 300 390
Min. depth of embedment (mm) hnom 94 113 143
Drill bit size (mm) do 14 24 28
Plate hole size (mm) dh 20 26 31
Anchor Length (mm) l 155 177 220
Actual Depth of Embedment (mm) hoct 108 124 161
Depth of Drill(mm) h1 120 135 172
Min. Tensile Strength of Bolt(kg/cm') Tu 7381 7381 7381
do Strength of Concerete(kg/cm') 210 210 210
Base piole Th'k(mm) tii. 9 12 16
Grouting Th'k(mm) t1 30 30 30
Anchor Bol! Type HILTl(HSL- TZ) or EQ.
w
PIPE SIZE "p"
TRUNNION "Q" ALLOWABLE LOADS FOR EXPANSION ANCHOR BOLT

* P = ~Fx'+ Fz'
(ANCHOR TYPE)
UNIT (mm)
PIPE SIZE TRUNNION MEMBER w * P1 Kq)
(P) NPS "Q" "M" (Kg) H=300 H=500 H=700 H=1000
1-1/2" 1· A5 400 80 50 - -
2" 1-1/2" A6 500 100 65 40 20
3•N4• 2· A7 800 160 95 65 50
5" 3• A10 1000 290 170 120 95
6"N8" 4• C10 1500 330 190 130 100
10" 6" C12 2000 720 420 290 230
12•N14" 8" C15 2500 830 480 330 260
--------·----~--~-- ---
BASE PLA TE ANO Bp LR REV.
PIPING SUPPORT ATTACHMENT DWG. ST-A4-1032 (1 OF 2) EXPANSION ANCHOR BOLT
(RESTING TYPE) AÜ
TRUNNION 'Q'
TRUNNION 'Q'
4-EXPANSION
ANCHOR BOL TS "J'
EL.30
B
A 1.1
MEMBER "M"
4-~dh HOLES MEMBER "M'
4-EXPANSION
'
!
---+- EL.30
+
B
A
BASE PLA TE DETAil
UNIT lmm' UNIT (mm)

TRUNNION BASE PLATE MEMBER BASE PLATE
PIPE SIZE "M"
NPS 'Q" A B t <ldh J A B t <ldh J
H/2" 1' 140 90 6 11 3/8' AS 180 120 6 11 3/8"
2" H/2" 140 90 6 11 3/8' A6 180 120 6 11 3/8'
3",4' 2" 140 90 6 11 3/8' A7 180 120 6 11 3/8"
6",8' 4" 160 120 9 11 3/8' A10 260 180 9 11 3/8"
10' 6" 210 160 12 13.5 1/2" C10 260 180 9 13.5 1/2"
12',14' 8" 260 200 12 13.5 1/2" C12 260 180 9 13.5 1/2'
16",18' 10" 320 250 16 17.5 5/8' C15 300 230 9 13.5 1/2"
20",24" 12" 350 280 16 17.5 5/8' C20 300 230 12 13.5 1/2'
H10 260 180 12 17.5 5/8'
H12 300 230 12 17.5 5/8'
H15 300 230 12 17.5 5/8'
H17 300 230 12 17.5 5/8'
H20 350 280 12 17.5 5/8'
NOTE
1. MATERIAL
- EXPANSION ANCHOR BOLT : A307-B GALVANIZED OR EQ.
2. REQUIRED MIN. BASE CONCRETE TH'K(h) SHOULD BE INFORMED TO

Cl'v1L ENGINEER FOR PA'v1NG DESIGN.
PIPING SUPPORT ATTACHMENT DWG. ST-A4-1032 (2 OF 2) EXPANSION ANCHOR BOLT 8 pLR
(RESTING TYPE) AO
-------
DESIGN APPUCA TION OF ANCHOR BOLT
dh
Anchor Bolt Sizel J)
d
3/8" 1/2" 5/8"
Shear stress orea (mm 2 ) A¡, 58 84 157
Min. spacing between anchors (mm) Sm;,, 46 54 68
Min. base concrete th'k (mm) h,,,~ 100 100 120
Min. edge distance (mm) Cmin 130 150 175
Min. depth of embedment (mm) h..m 51 60 75
Drill bit size (mm) d. 10 12 16
Plate hale size (mm) dh 11 13.5 17.5
Anchor Length (mm) 1 110 125 150
Depth of Drill( mm) h1 60 70 90
Min. Tensile Strength of Bolt(kg/cm 2 ) Tu 4218 4218 4218
Strength of Concerete(kg/cm 2 ) 210 210 210
do Base plate Th 'k( mm) t11x 9 12 16
Grouting Th'k(mm) t1 30 30 30
ALLOWABLE LOADS FOR EXPANSION ANCHOR BOLT

(RESTING TYPE)
UNIT (mm)
PIPE SIZE TRUNNION MEMBER W (Ka)
(P) NPS "Q" "M" H=500 H=700 H=900 H=1200
:r:: 1-1/2" 1" AS 300 200 150 100
2· 1-1/2" A6 520 300 210 140
3"N4D 2" A7 540 300 210 14-0
5" 3" A10 600 320 220 150
6"N8n 4" ClO 780 410 280 190
EL.30 10" 6" C12 1900 900 590 390
12"N14" 8" C15NC20 2650 1190 750 500
16"N18" 10" H10NH17 6000 2450 1500 990
20"N24" 12" H20 7300 3100 1850 1150
----------------- -~----
BASE PLA TE ANO p LS REV.
PIPING SUPPORT ATIACHMENT DWG. ST-A4-1033 (1 OF 2) EXPANSION ANCHOR BOLT 8
(FOR ADJUST TYPE) AO
4-EXPANSION
+ --+- ANCHOR BOL TS "J"
~l
1
'
1
------------
1
+
'
1
_._
'
B
1.1 ' A '1.1
BASE PLA TE DETAIL
UNIT (mm)
TRUNNION BASE PLATE
PIPE SIZE
NPS "Q" A B t \ldh J
1-1/2" 1· 260 210 6 11 3/8"
2· 1-1/2" 260 210 6 11 3/8"
3",4" 2· 260 210 6 11 3/8"
6",8" 4• 280 230 9 11 3/8"
10· 6" 330 280 12 13.5 1;2·
12",14' 8" 380 320 12 13.5 1/2"
16",18" 10· 440 370 16 17.5 5/8"
20",24• 12· 470 400 16 17.5 5/8"
NOTE
1. MATERIAL
- EXPANSION ANCHOR BOLT : A307-B GALVANIZED OR EQ.
2. REQUIRED MIN. BASE CONCRETE TH'K(h) SHOULD BE INFORMED TO

Cl\11L ENGINEER FOR PA \11NG DESIGN.
-------------------------- --------
PIPING SUPPORT ATTACHMENT DWG. ST-A4-1033 (2 OF 2) EXPANSION ANCHOR BOLT BPLS
(FOR ADJUST TYPE) AO
---------
DESIGN APPUCA TlON OF ANCHOR BOL T
Anchor Bolt Size( J)

3/8" 112· 5/8"
Shear stress orea (mm 2 ) At. 58 84 157
Min. spacing between anchors (mm) Sm;, 46 54 68
Min. base concrete th'k (mm) h.,,;, 100 100 120
Min. edge distance (mm) Cm;, 130 150 175
Min. depth of embedment (mm) h..m 51 60 75
Dril! bit size (mm) d0 10 12 16
Plate hole size (mm) dh 11 13.5 17.5
Anchor Length (mm) 1 110 125 150
Depth af Drill(mm) h1 60 70 90
Min. Tensile Strength of Bolt(kg/cm') Tu 4218 4218 4218
Strength of Concerete(kg/cm' ) 210 210 210
do Base plate Th'k(mm) lfix 9 12 16
Grouting Th'k(mm) l1 30 30 30
ALLOWABLE LOADS FOR EXPANSION ANCHOR BOLT
! (RESTING TYPE)
UNIT (mm)
1
' PIPE SIZE TRUNNION W (Kq)
1 1 (P) NPS ·a·
H=500 H=700 H=900 H=1200
1-1/2" 1·
1 i :r:
2· 1-1;2·
300
520
200
300
150
210
100
140
1 3•N4H 2· 540 300 210 140
5• 3• 600 320 220 150
1
6"N8" 4• 780 410 280 190
10· 6" 1900 900 590 390
12·Nw 8" 2650 1190 750 500
16"N18" 10· 6000 2450 1500 990
2o•N24• 12· 7300 3100 1850 1150
REV
PIPING SUPPORT STANDARD DWG. ST-A4-1101 (1 OF 2) SHOE S-1
(FOR HOT INSULA TED PIPE; SUDE TYPE) AO
PIPE SIZE "p"
JBS, TBI "T"J!¡ .
. PIPE SIZE
UNIT (mm)
STEEL ll *ALLOW.
NPS "p" H
. B t1 LOAD(Kg
3/4" N 2-1/2 ¿.QQ_ 650
~
:r: 3• N 6" 100 ...___
150 9 1370
300
(450)
SEE NOTE 3 3/4" ~ 8"
U-Ji 2· 2-112·
N
3• 6"
a· 150
¿.QQ_
150 ~ 9
N
1370
600
940
a· 150 940
2· 2-1/2"
N
~ 600
PIPE SIZE "p"
3• 6" 200 ~ 9
N 710
a· 150 710
MADE BY
H-BEA
25 11 300
(450)
SEE NOTE 3 10" - 24"
UNIT (mm) UNIT {mm)

PIPE SIZE STEEL 11!. • ALLOW. PIPE SIZE STEEL lt • ALLOW.
NPS "p" H ha LOAD (Kg) NPS "p" H ha LOAD (Kg)
8 t1 8 tl
10" 123 150 9 7200 10· 223 150 9 5300
12" __J1L 6500 12" ~ 5000
14" 200 14" ~ 200 4500
~~~
9 6000 9
16" 100 5500 16" 200 220 4000
18" 149 4500 18" ~ 3500
20" 143 300 12
4000 20" ~ 300 12
3000
22" 138 3500 22" ~ 2500
?4" ~ 3000 ?4" 235 2300
10" 172 150 9 5500 10" 272 150 9 4700
12· _J.!&_ 5000 12" ~ 4700
14" 181 200 9 .4500 14" _1ª1___ 200 9 4500
16" 150 176 4000 16" 250 276 4000
18" 198 3500 18" ~ 3500
20" 191 3000 20" ~ 3000
'186 300 12 300 12
22" 22" ~
?4" 182
2500
2300 ~ .· 282
2500
2300
NOTE
2. SHOE HEIGHT
1. MATERIAL H INS. TH'K T CODE H INS. TH'K "T" CODE
- PARTS DIRECTLY WELDED TO PIPE : SAME AS RUN PIPE
100 UP TO 75 b 200 126 TO 175 d
OR MAT'L TABLE.
150 76 TO 125 e 250 176 TO 225
CODE RUN PIPE PARTS DIRCTLY WELDED
TO PIPE 3. WHEN PIPE LONGITUDINAL EXPANSION EXCEEDS 100 mm, A LONGER SHOE
K API 5l GR.B, A106 GR.B A283 GR.C OR EQ. 1'11LL BE USED ANO DESINGNA TED BY ADDING AN "L" TO THE END OF SYMBOL.
y A335 P11 A387 GR.11 OR EQ.
A335 P22 4. REINF. PADS ARE REQUIRED FOR 10" & LARGER STAINLESS STEEL PIPE.
w A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ. 5. FOR UNES 20" & OVER CARBON STEEL PIPE ANO THOSE 1'11TH WALL THICKNESS
LESS THAN STANDARD WEIGHT SHALL BE CHECKED TO DETERMINE THE NEED
z A312 TP321 A240-321 OR EQ.
FOR REINFORCING PAD.
- OTHERS PART : A36 OR EQ. 6. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
() o ()
is1L~-K
P /S SID. NO. REINF. PAD(IF REQ'D)
PIPE MAT'L
LONGER SHOE _ _ ___J
' - - - - SHOE HEIGHT 1
CODE
PLAN DWG. NO. _ _ _ ___J
' - - - - - - PIPE SIZE "p"

PLAN ISO
SHOE S-1 REV
PIPING SUPPORT STANDARD DWG. ST-A4-1101 (2 OF 2) (FOR 26" & LARGER HOT IN SULA TED PIPE; AO
SUDE TYPE)
/-
,/-- ---+--- 1 --....____
'"-~
INS. TBI "T"
/ )\ Jsv
/ \
''
PIPE-
- SIZE "p"
- -- -
!
-,--- -
\ t1
LE
\
400
(750)
E
26" & LARGER (E+350)
SEE NOTE 3 FOR DIMENSIONS IN ( )
UNIT (mm)
PIPE SIZE v.flGHT (Kg) • ALLOWABLE LOAD (Kg)
NPS "p' B A H E D R tl 12
H=lOO H=150 H=200 H=250 H=lOO H=150 H=200 H=250
26' 500 200 450 500 330 9 12 61 67 74 80
28' 530 215 450 500 356 9 12 65 71 78 84
30' 580 240 450 500 381 9 12 70 77 83 90
32" 610 255 450 500 407 9 12 74 81 87 94
34' 660 280 450 500 432 9 12 79 86 93 100
36' 17300 15900 14800 13800
690 295 H=lOO 450 500 457 9 12 83 90 97 104
40" 760 330 H=150 500 550 508 9 12 96 104 111 119
42' 810 355 H=200 500 550 533 9 12 102 109 117 125
44• 840 370 H=250 500 550 559 9 12 106 114 121 129
48" 920 410 500 550 610 9 12 115 124 132 140
52" 1000 450 500 550 660 12 16 166 177 189 200
54' 1040 470 500 550 686 12 16 172 184 195 207
60' 1150 525 550 600 762 12 16 200 213 225 238
19300 18100 17000 16100
66" 1270 585 550 600 838 12 16 221 234 247 260
72• 1390 645 550 600 914 12 16 243 256 270 283
80' 1540 720 550 600 1016 12 16 270 284 298 312
NOTE
1. MATERIAL
- PAD : SAME AS RUN PIPE OR MAT'L TABLE.
CODE RUN PIPE PAD 2. SHOE HEIGHT
K API 5l GR.B, A106 GR.8 A283 GR.C OR EQ.
y H INS. TH'K CODE H INS. TH'K CODE
A335 P11 A387 GR.11 OR EQ.
100 UP TO 75 b 200 126 TO 175 d
w A335 P22 A387 GR.22 OR EQ.
150 76 TO 125 e 250 176 TO 225 e
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ. 3. WrlEN PIPE LONGITUDINAL EXPANSION EXCEEDS 150 mm,
A LONGER SHOE 'MLL BE USED ANO DESIGNATED AN "L"
- OTHER PARTS : A36 OR EQ. TO THE END OF SYMBOL.
SYMBOL & CODING
( o
P/S sm.
LONGER SHOE---
NO.
~--
PIPE MAT'L
SHOE HEIGHT
)~
COOE
PLAN DWG. NO. ---~ ~--- PIPE SIZE "p"
PLAN ISO
-------------------------- -------------~-------- ------------

SHOE HHS-1 REV
PIPING SUPPORT STANDARD DWG. ST-A4-1101H (FOR HOT INSULA TED PIPE; SUDE TYPE)
(FOR HIGH PRESSURE PIPING) AO
PIPE SIZE "p"
A
_. . L »~!NS.
TBI "T"
A
_....L
»
UNIT (mm)
PIPE SIZE STEEL 11'.
' \ NPS "p" H
B t1
\. j 3/4" N 2-1/2 100
~
MADE BY • • 3• N 6" 100 150 9

H-BEAM ~
' s· 150
2· N 2-1/2" 100
300
(450) LiJ 3• N 6" 150 150
~
9
SEE NOTE 3 3/4" ~ 6" s· 150
2· N 2-1/2" 150
~
PIPE SIZE "p" 3• N 6" 200 ~

150 9
s· 150
MADE BY
H-BEA
25 11 300
(450)
SEE NOTE 3 6" - 24"
UNIT (mm) UNIT (mm)

PIPE SIZE STEEL 1t PIPE SIZE STEEL lt
NPS "p" H ha NPS "p" H ha
B t1 B t1
10· 123 150 9 10· 223 150 9
12· 12" 226
14" g~ 200 9 14" 223
-
200 9
16" 100 120 16" 200 220
18" 149 18" 249
20" 143 20·
-
__w_
300 12 300 12
22· ---i38 22· ~
?4" ~ ?4" 235
10" 172 150 9 10· 272 150 9
12· 185 12" ~
14" 181 200 9 14" 281 200 9
16" 150 ~ 16" 250 ---;¡j6
18" 198 18" ~
20" 191 20· ~
22" 186 300 12 22" 286 300 12
24" 182 24" 282
NOTE
1. MATERIAL 2. SHOE HEIGHT

- PAD : SAME AS RUN PIPE OR MAT'L TABLE. H INS. TH'K "T" CODE H INS. TH'K "T" CODE
CODE RUN PIPE PAD 100 UP TO 75 b 200 126 TO 175 d
K API 5L GR.8, A106 GR.8 A283 GR.C OR EQ. 150 76 TO 125 e 250 176 TO 225 e
y A335 P11 A387 GR.11 OR EQ.
3. WHEN PIPE LONGITUDINAL EXPANSION EXCEEDS 100 mm, A LONGER SHOE
w A335 P22 A387 GR.22 OR EQ.
WILL BE USED ANO DESINGNA TED BY ADDING AN "L • TO THE END OF SYMBOL.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
4. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
- OTHER PARTS : A36 OR EQ.
SYMBOL & CODING
P/S STD. NO. --~

PIPE MAT'L
LONGER SHOE - - - - '
SHOE HEIGHT
CODE
PLAN DWG. NO. ----~
~--- PIPE SIZE •p•
PLAN ISO
---·-~-·-------·--- - - - - - - - - - - --
REV
PIPING SUPPORT STANDARD DWG. ST-A4-1104 CRADLE S- 4 t---
{FOR COLO INSULATED PIPE, RESTING TYPE) AQ
STRUCTURAL CRADLE STRUCTURAL CRADLE

{A283 GR.C HOT DIP GAL'V) (A283 GR.C HOT DIP GAL'V)
TH'K : t TIH'K : t S
~ ~ ~ ~
f\·
PIPE SIZE "p" JNS.TBI "T" PIPE SIZE "p" JNS.TBI "T"
~
;.r IT\~J7\ r~"~
n ,
,
. FlELD
ADJUST. /t~ " U-' IT\~J7\ , ski /i :: ~ J FIELD
ADJJST.
-+-\----- ·------m--~-~ .? ~ J ';' r"? -*'-\----- - ------~--~-~ '::::1~ ..... n,
~ ~ l J._ '1
U -J
1V g u
fü1.Lf
Q
f._,1
_J
\
" '?
1 ,.i
¡;\•~1/i
U -J
0_ Q Q _J
f.)
- ..·.·.+.·.··' l.>Y •
·l~d i ~~ L1 "'
, 1301, --..,-- • 13g .t L1 , 1301, ~ v<~
. : L • SEAL PLA TE URETIHANE : 1 L • SEAL PLA TE URETIHANE
/ 4-BOLTS
0.7mm thk. FOAM
{ A 2 4 0 - T P 3 0 4 ) 4 - B O L T S (12"N24")
j 0.7mm thk.
{A240-TP304)
FOAM
(10" & SMALLER) BOLT SIZE 6-BOLTS {26 & LARGER) BOLT SIZE
{SEE TABLE) {SEE TABLE)
1O" & SMALLER 12" TO 60"
UNIT (mm) UNIT (mm)

WJl INSULAllON TH'K ·r 25-50 51-100 101-150151-200l201-2sm51-JOO Ctx.D INSULAllON TH'K i 25-50 51-100 101-150151-20012c1-2sol251-100
CRADLE TH'K H=SO H=100 H=150H=20~=25d1=300 CRADLE TH'K H=50 IH=100IH=1501-i=200l-i=25d1=300
SHOE HEIGHT COOE o b e d SHOE HEIGHT CODE o b e d e f
~!~~ r L L1 R t BOLT SIZE A ~l~t r L L1 R t BOLT SIZE A
1/2 ' 11 310 250 61 111 161 - 4 12X50 18 20" 254 420 360 304 354 404 454 504 554 5 20X60 30
314 14 310l?'i0 64 114 164 - 4 12x50 18 24" 305 420 360 355 405 455 505 555 605 6 20X60 30
1· 17 310 250 67 117 167 - 4 12x50 18 26" 331 420 360 381 431 481 531 581 631 6 20X60 30
-112 ?5 .110 250 75 1?'i 175 225 4 12x50 18 28" 356 4?01.160 406 456 506 556 606 656 6 ?OX60 30
2· 31 370 310 81 131 181 231 4 12x50 18 30" 381 420 360 431 481 531 581 631 681 6 20X60 30
?-112 37 3701310 87 137 187 237 5 12x50 18 32" 407 420 360 457 507 557 607 657 707 6 20X60 30
3• 45 420 360 95 145 195 245 5 1?x50 18 34" 432 420 360 482 532 582 632 68? 732 6 ?OX60 30
4• 58 420 360 108 158 208 258 5 12x50 18 36" 458 420 360 508 558 608 658 708 758 6 20X60 30
5• 71 4?01.160 121 171 ?21 271 5 1?x50 18 40" 508 4?0 360 558 608 658 708 758 808 6 ?OX60 30
6" 85 420 360 135 185 235 285 5 12x50 18 42" 534 420 360 584 634 684 734 784 834 6 20X60 30
A" 110 420 360 160 210 260 310 '160 5 16X60 25 44" 559 520 460 609 659 709 759 809 859 9 24X70 40
1o· 137 420 360 187 237 287 :i37 387 5 16X60 ?5 48" 610 5?0 460 660 710 760 810 860 910 9 24X70 40
12· 162 420 360 212 262 312 362 412 5 20X60 30 52" 661 520 460 711 761 811 861 911 961 12 24X70 40
14" 178 420 360 228 278 328 378 428 5 20X60 30 54" 686 5?11 460 736 786 R36 886 936 986 12 ?4X711 40
16" 204 4201360 254 304 354 404 454 5 20X60 30 60" 762 520 460 812 862 912 962 1012 1062 12 24X70 40
18" 229 420 360 279 329 379 429 479 5 20X60 30
NOTE
1. MATERIAL
- URETIH ANE FOAM : SEE DWG.NO. ST-A4-1022
- OTIHER STEEL PARTS : A36 GALVANIZED OR EQ.
SYMBOL & CODING
~-_1l_QQl-lJ.¿f'-~ 1
( o
P/S STO. NO. _J CRADLE TJH'K
CODE
)~
PLAN DWG. NO. --~ ~--- PIPE SIZE "p"
PLAN ISO
- - - - - - - - · - - - - - - - - - - - - - - - ------·
REV
PIPING SUPPORT STANDARD DWG. ST-A4-1105
SHOE S-5
(FOR HEA T TREA TED PIPE; SUDE TYPE) AO
PIPE SIZE
"p"
1.300.I
(450)
SEE NOTE 3 8" & SMALLER
PIPE SIZE
p
MADE BY
H-BEAM
300 1
(450) B
SEE NOTE 3
10" - 24"
UNIT (mm)
PIPE SIZE STEEL le. ALLOW.
PIPE SIZE STEEL le. ,. ALLOW. NPS "p" H ha LOAD(Kg)
B t1
NPS "p" H ha LOAD(Kg)
B t1 10 207 150 9
10 107 150 9 12· ...lli.
12" _11.Q_ 14" 220 200 9
14" 104 200 9 16 '"fil"' 5300
16 .. 101 7400 18.. 200 210
20·· 204
g~
18 100
20· 22 ~ 300 12
22 116 300 12 L'+ ¡rgg-
Z4 llT 10· 257 150 9
10 156 150 9 12" 269
12· 169 14 249 200 9
14 162 200 9 16 288 4500
16 150 Ts7 6300 18 250
~
18.. 179 20 267
20 .. 169 22 263 300 12
22 ~ 300 12 ;¿4 'L6U'
L'\ IT6\r"
NOTE 2. SHOE HEIGHT

1. MATERIAL H INS. TH'K CODE H INS. TH'K CODE
CODE RUN PIPE CLAMP BOLT & NUT 100 UP TO 75 b 200 126 TO 175 d
150 76 TO 125 e 250 176 TO 225 e
y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H 3. WHEN PIPE LONGITUDINAL EXPANSION EXCEEDS 100 mm,
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H A LONGER SHOE 'MLL BE USED AND DESIGNA TED BY ADDING
X A312 TP304, TP316 A240 TP304 OR EQ. A193-87 /A194-2H AN "L" TO THE END OF SYMBOL.
z A312 TP321 A240 TP321 OR EQ. A193-B7 /A194-2H 4. SEE DWG. NO. ST-M-1014 FOR THE DETAil OF CLAMP.
SYMBOL & CODING
() o
[sl_,¡
P/s sm. NO.--~ ~--CLAMP MAT'L
~--- SHOE HEIGHT

LONGER SHOE - - - - - ' CODE
PLAN DWG. NO. - - - - - " ~---- PIPE SIZE "p"
PLAN ISO
-------------------------~-------- ---
SHOE HHS-5 REV
PIPING SUPPORT STANDARD DWG. ST-A4-1105H (FOR PWHT PIPE; SUDE TYPE)
PIPE SIZE
•p•
UNIT (mm)
ha STEEL ll REMARK
B t1
9
t.AADE BY
H-BEAM
1.300.I
(450)
SEE NOTE 3 8" & SMALLER
PIPE SIZE
p
1300 1 MADE BY
H-BEAM
(450) UNIT (mm)
SEE NOTE 3 PIPE SIZE STEEL ll
NPS •p• H ha REMARK
B t1
10" - 24" 10 107 l!JU 9
12· r11-º--
14" 104 200 9
16' '101
NOTE 18 100 130
1. t.AATERIAL
20 '121 300 12
22 '1f6
CODE RUN PIPE CLAMP SHOE BOLT & NUT
z+ nrr
10 156 150 9
K API 5L GR.B, A106 GR.B A283 GR.C OR EQ. A36 OR EQ. A307 GR.B OR EQ. 12' 169
y A335 P11 A387 GR.11 OR EQ. A36 OR EQ. A193-B7 /A194-2H 14 '162 200 9
w A335 P22 A387 GR.22 OR EQ. A36 OR EQ. A193-B7 /A194-2H 16 150 '157
X A312 TP304, TP316 A240 TP304 OR EQ. A36 OR EQ. A193-B7 /A194-2H 18 179
z A312 TP321 A240 TP321 OR EQ. A36 OR EQ. A193-B7 /A194-2H 20 169 300
22 164 12
L+ 100"'
10" 207 150 9
2. SHOE HEIGHT
12" ...lli.
H INS. TH'K CODE H INS. TH'K CODE 14" 220 200 9
100 UP TO 75 b 200 126 TO 175 d 16' 214
150 76 TO 125 250 176 TO 225 18" 200 11º-
20 204
22 2of 300 12
3. WHEN PIPE LONGITUDINAL EXPANSION EXCEEDS 100 mm,
A LONGER SHOE 'MLL BE USED ANO DESIGNA TED BY ADDING
L't -m-
10 257 150 9
AN "L" TO THE END OF SYMBOL. 12" 269
4. SEE DWG. NO. ST-M-1014 FOR THE DETAil OF CLAMP. 14 249 200 9
16' 288'
18 250 275
5. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SH APE STEEL.
20 '267 300 12
22" 263
L't i20U
SYMBOL & CODING
) o )
P/S SID. NO.--~ CLAMP MAT'L
.____ _ _ SHOE HEIGHT
LONGER SHOE --~
CODE
jHH{b-Kj
PLAN DWG. NO.---~ '-------PIPE SIZE •p•
PLAN ISO
- - - - - - - - - - - - - - - - - - - -------------------------- -
REV
PIPING SUPPORT STANDARD DWG. ST-A4-1107 SHOE S-6
(FOR BARE AND SLOPE UNE) AO
PIPE SIZE "p" /

:r:
300
211 rv 8" (450)
SEE NOTE 2
!1!3mm THR'D
VENT HOLE
REINF. PAD
-~- (IF REQ'D)
6
PIPE SIZE •p• /
10" N 24" 300

(450)
SEE NOTE 2
D PIPE SIZE "p"

(D+350)
!1!3mm THR'D
VENT HOLE
_J:r:
I. 400
(750)
26" N 80"
E
(E+350)
SEE NOTE 2 FOR DIMENSIONS IN ( )
1. MATERIAL
- PARTS DIRECTL Y WELDED TO PIPE : SAME AS RUN PIPE
OR MAT'L TABLE.
PARTS DIRECTL Y 2. WHEN PIPE LONGITUDINAL EXPANSION EXCEEDS 100mm,
CODE RUN PIPE WELDED TO PIPE A LONGER SHOE 'MLL BE USED AND DESIGNA TED BY ADDING
K API 5L GR.B, A106 GR.B A283 GR.C OR EQ. AN "L" TO THE END OF SYMBOL.
y A335 P11 A387 GR.11 OR EQ. 3. SEE DWG. NO. ST-A4-1101 FOR THE DETAil OF SHOE.
w A335 P22 A387 GR.22 OR EQ.
A240-304 OR EQ. 4. REINF. PADS ARE REQUIRED FOR 1O" & LARGER STAINLESS STEEL PIPE.
X A312 TP304, TP316
z A312 TP321 A240-321 OR EQ. 5. FOR UNES 20" THRU 24" ARE CARBON STEEL AND THOSE 'MTH
WALL THICKNESS LESS THAN STANDARD WEIGHT SHALL BE CHECKED
L A333 GR.6 A516 GR.60 OR EQ. TO DETERMINE THE NEED FOR REINFORCING PAD.
N A333 GR.3 A203 GR.D OR EQ.
- OTHERS PART : A36 OR EQ.
SYMBOL & CODING
) o )
1S6L~100-K1
P/S SID. NO. PIPE MAT'L
LONGER SHOE ' - - - - - SHOE HEIGHT
PLAN DWG. NO. --~ ' - - - - - - - - - - PIPE SIZE "p"

PLAN ISO
-----------------·---·------· -
REV.
ANCHOR AF-31
(TRUNNION TYPE ON F/D) AO
PIPE SIZE "p"

PIPE SIZE "p"
"a" EQUALS THE
TRUNNION WALL TH'K
----~· ~'.'..._
oo
N o
o
N
ILIV. T
TYPl-r TYPl-P
(ON FOUNDATION) (ON PAVING) PIPE SIZE SUPPOR
NPS "p" PIPE
1-1 /2" 1·
"a" EQUALS THE "a" EQUALS THE
PIPE SIZE "p" TRUNNION WALL TH'K PIPE SIZE "p" TRUNNION WALL TH'K 2· 1-1/2"
a a
3• 2"
ILIV. "I• 4• 2"
- - - - - - _IJIY,_'.'J~_ --------- 6" 4"
8" 4"
10· 6"
o 12· 8"
o
N o 14" 8"
:::r:- o
N
x
<(
:::r:- 16" 10·
:::;;
511 VENT HOLE
x
<(
:::;; 18" 10·
20· 12·
24" 12"
ILIV. T 26" 14"
28" 14"
30" 16"
32" 16"
34• 18"
TYPl-S TYPl-T
(ON FOUNDATION) (ON PAVING) 36" 18"
40" 20·
NOTE 42" 20·
1. MATERIAL
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA T'L TABLE.
CODE RUN PIPE SUPPORT PIPE
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ.
y 2. SEE DWG. NO. ST-A4-1031 FOR TYPE-P & T
A335 P11 A335 P11 OR EQ.
FOR THE DETAil OF BASE PLATE ANO EXPANSION ANCHOR BOLT(BPLA)
w A335 P22 A335 P22 OR EQ.
X A312 TP304, TP316 A312 TP 304 OR EQ. 3. SEE DWG. NO. ST-A4-0004
z A312 TP321 A312 TP321 OR EQ. FOR APPUCA TION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
L A333 GR.6 A333 GR.6 OR EQ.
N A333 GR.3 A333 GR.3 OR EQ.
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
SUPP'T SERIAL NO.
REINF.PAD
(IF REQ'D)
PIPE MAT'L
ELEV. "F"
(J
l>iooo
7.~ ) p
ELEV. "E" 1 AF3}-oogl
PLAN DWG. NO.
PIPE SIZE "p" PLAN ISO
ANCHOR HAF-31 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1111H (TRUNNION TYPE ON F /D)
"a" EQUALS THE

PIPE SIZE "p" TRUNNION WALL TH'K
-----~·~'.'.._
oo
00
IUN• .,-
TYPl-1
(ON FOUNDA TION)
"a" EQUALS THE

PIPE SIZE SUPPOR
NPS "p" PIPE
1-1/2" 1·
2· 1-1/2"
3• 2"
4• 2·
6" 4•
8" 4•
10· 6"
12" 8"
IUN• .,- 14" 8"
16" 10·
18" 10·
20· 12·
24" 12·
TYPl-S
(ON FOUNDATION)
1. MATERIAL
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MAT'L TABLE.
y A335 P11 A335 P11 OR EQ.
w A335 P22 A335 P22 OR EQ.
X A312 TP304, TP316 A312 TP 304 OR EQ.
z A312 TP321 A312 TP 321 OR EQ.
2. SEE DWG. NO. ST-A4-0004H FOR APPUCATION OF TRUNNION ALLOWABLE LOAD.
SYMBOL & CODING
~
1
) )( )
P/S STD. NO.
SUB-TYPE PIPE MAT'L
SUpp'T SERIAL NO. ELEV. "F" HAF31F-009

HAF31F-009
PLAN DWG. NO. ELEV. "E"

ANCHOR AF-32 REV.
(TRUNNION TYPE FOR ALLOY AND HEAT AO
TREA TED PIPE
"a' EOUALS THE

PIPE SIZE "p"
"a" EOUALS THE
TRUNNION WALL TH'K
TRUNNION "01"
x
<(
~
ILIV. "I" ILIV. "I"
TYPl-F TYPB-P
(ON FOUNDATION) (ON PAVING) PIPE SIZE NPS
NPS 'p' "Q1","Q2"
1-1/2" 1·
2" 1-1/2"
"a" EOUALS THE "a" EOUALS THE
3" 2"
PIPE SIZE "p" TRUNNION WALL TH'K PIPE SIZE "p" TRUNNION WALL TH'K
4• 2"
6" 4"
- - - - - - _BJ,BV._ "I~_ ILIV. "B"
a· 4"
10" 6"
12· a·
14" 8"
o 16" 10·
o o
N o
I- COLUMN "02" N
I- 18" 10·
X
<( X 20"
::::;; <( 12"
::::;;
24" 12·
26" 14"
ILIV. "F" 28" 14"
30" 16"
32" 16"
34" 18"
36" 18"
TYPl-S 40" 20"
(ON FOUNDATION) 42" 20"
NOTE
1. MATERIAL
- TRUNNION "01'' : SAME AS RUN PIPE OR MA T'L TABLE.
- COLUMN "02" : API 5L GR.B OR EO.
2. SEE DWG. NO. ST-A4-1031, FOR P & T TYPE
CODE RUN PIPE TRUNNION "01"
FOR THE DETAil OF BASE PLA TE AND EXPANSION ANCHOR BOL T(BPLA)
K API 5L GR.B, A106 GR.B API 5L GR.B OR EO.
y A335 P11 A335 P11 OR EO. 3. SEE DWG. NO. ST-M-0004
FOR APPLICA TION OF REINFORCING PAD AND TRUNNION ALLOWABLE LOADS.
W A335 P22 A335 P22 -OR EO.
X A312 TP304, TP316 A312 TP304 OR EQ. 4. IF APPLICABLE ALL TRUNNIONS ON SHOP FABRICA TED PIPE CAN BE
INSTALLED BY THE SHOP.
Z A312 TP 321 A312 TP 321 OR EO.
SYMBOL & CODING
REINF.PAD
) )(
P/S sm. NO.
(IF REO'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO. ~-- ELEV. "F"
PLAN DWG. NO. ---~ ' - - - - - ELEV. "E"

(JA0-13001) ' - - - - - - - - P I P E SIZE •p• PLAN ISO
·------------------------··
ANCHOR AF-41 REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1113 (FOR COLO INSULA TED PIPE;
TRUNNION TYPE ON F O AO
"a" EQUAL THE
TRUNNION WALL TH'K
"a" EQUAL THE __lfP. ~-
PIPE SIZE "p"
oo
N
50 VENT HOLE
8
N
URETHANE BLOCK
(URB)
ILIV. "r" ILIV. "r"
EXISTING INSERT PLA TE

TYPl-S
TYPE-r (ON FOUNOATION)
(ON FOUNOATION)
•a" EQUAL THE

"a" EQUAL THE TRUNNION WALL TH'K
-~_,_·_.-
PIPE SIZE "P"
50 VENT HOLE
URETHANE BLOCK
o (URB) o
o
o
N N
x
<(
:::;;
t;¡-¿~b~N~b~~S "J" 6
BASE PLATE
ILEV. y GROUTING
TYPl-P TYPl-T
(ON PAV1NG) (ON PAV1NG)
1- MATERIAL
UNIT (mm)
PIPE ~IZE SUPPORT U.BLOCf PIPE SIZE SUPPORT U.BLOCi
COOE RUN PIPE NPS P" PIPE H1 NPS "p" PIPE H1
K API :i GR.B, A106 GR.B 1-1 /2" 1· 104 14" 8" 117
L A 33 GR.1 OR 6 2" 1-112· 104 16" 10· 117
X A312 TP304, TP316 3" 2· 104 18" 10· 117
N A333 GR.3 4" 2· 104 20· 12" 117
6 4• 111 24" 12· 117
2. SEE OWG. NO. ST-M-1020 FOR THE DETAil OF
8" 4• 111 26"N28" 14" 117
URETHANE BLOCK ASSEMBLY(URB)
10" 6" 114 30" 16" 124
3. SEE OWG. NO. ST-M-0004 FOR APPLICATION OF
REINFORCING PAO ANO TRUNNION ALLOWABLE LOADS. 12" 8" 117 36" 18" 133
SYMBOL & CODING
P/S sm. NO. REINF.PAD

(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
PLAN OWG. NO. ----~ '------ ELEV. "F"
PIPE SIZE •p• ' - - - - - - - - - ELEV. "E" PLAN ISO
REV.
ANCHOR AF-51
(FOR 2" & SMALLER PIPE;
U-BOL T TYPE ON F AO
BOL T HOLE 2-h~

PIPE SIZE "p"
U")~
"Ó
llD. , . llD. , .
p
w oo
o
x
<
4-EXPANSION ó
ANCHOR BOLTS • J"
llD. T
ev\ ILIV. T
NOTE
1. MATERIAL
- ANGLE : A36 OR EQ.
y A335 P11 A193-B7 /A194-2H UNIT (mm)
w A335 P22 A193-B7 /A194-2H PIPE SIZE MEMBER SIZE ALLOWABLE LOAD (Kg)
X A312 TP304, TP316 A320-B8/A194-8 NPS •p• "M" c h~
Wmax Pmax
z A312 TP321 A320-B8/A194-8
1/2" A5 36 7 140 15
2. SEE DWG. NO. ST-M-1031
FOR THE DETAil OF BASE PLATE ANO EXPANSION 3/4" 1 40 7 140 15
ANCHOR BOLT(BPLA)
1· 45 7 140 15
+
1-1/2" A6 60 11 330 30
4. USE THIS SUPPORT FOR 2" & SMALLER SOCKETWELD,
SCREWED, NON-WELDABLE PIPE.
2· i 75 11 330 30
5. SEE DWG. NO. ST-M-1001 FOR THE DETAil OF U-BOLT(UBT)
SYMBOL & CODING
P/S SID. NO.

SUPP'T SERIAL NO.
PIPE MATERIAL
ELEV. T
(
J ~~ )
l(
PLAN DWG. NO.
PIPE SIZE •p•

ELEV. "E"
1 AF51(I 1 A~1-0091
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1121 ANCHOR AS-1
(FOR HOT IN SULA TED PIPE; SHOE TYPE) AO
TYP.
6
EXISTING STEEL
OR INSERT PLA TE
4" & SMALLER 5" TO 8"
EXISTING STEEL
OR INSERT PLA TE
10" TO 24" UNIT (mm)
ALLOW. LOAD (kc
PIPE SIZE 8 A E R
H=100 H=150 H=200 H=250
1"N2" 100 - - 31
NOTE 2-1/2" 100 - - 37
3• 150 - - 45
1. MATERIAL
4• 150 - - 58
- PAD : SAt.AE AS RUN PIPE OR t.AAT'L TABLE.
5• 150 - - 71
CODE RUN PIPE PAD 6" 150 - - 85
K API 5L GR.B, A106 GR.8 A283 GR.C OR EQ. 8" 150 - - 110
y A335 P11 A387 GR.11 OR EQ.
10" 150 - - 137
w A335 P22 A387 GR.22 OR EQ.
12" 200 - - 162
X A312 TP304, TP316 A240-304 OR EQ.
14" 200 - - 178
z A312 TP321 A240-321 OR EQ.
16" 200 - - 204 REFER O DS-7
- OTHER PARTS : A36 OR EQ. 18" 300 - - 229
20· 300 - - 254
2. SHOE HEIGHT
22· 300 - - 280
H INS. TH'K CODE H INS. TH'K CODE 24" 400 - - 305
100 UP TO 75 b 200 126 TO 175 d
26" 500 200 450 330
150 76 TO 125 e 250 176 TO 225 e
28" 530 215 450 356
30• 580 240 450 381
3. SEE DWG. NO. ST-M-0003 FOR THE APPLICATION OF
ALLOWABLE LOAD. 32" 610 255 450 407
34" 660 280 450 432
4. SEE DWG. NO. ST-M-1101 FOR THE DETAil OF SHOE.
36" 690 295 450 458
40" 760 330 500 508
42" 810 355 500 534
SYMBOL & CODING
( )(
P/S SID. NO. ~--

PIPE t.AAT'L
SHOE HEIGHT
)~
CODE
~---- PIPE SIZE •p·

PLAN ISO
·-------------------------------- -
PIPING SUPPORT STANDARD DWG. ST-A4-1121H

ANCHOR HAS-1 REV.
(FOR HOT IN SULA TED PIPE; SHOE TYPE)
4" & SMALLER
EXISTING STEEL
OR INSERT PLA TE
6" TO 24"
PIPE SIZE B R
1·N2" 100 31
2-1/2" 100 37
3" 150 45
NOTE 4" 150 58
5" 150 71
1. MATERIAL
6" 150 85
- PAD : SAME AS RUN PIPE OR MA T'L TABLE.
8" 150 110
CODE RUN PIPE PAD
10· 150 137
K API 5L GR.8, A106 GR.B A283 GR.C OR EQ.
y 12· 200 162
A335 P11 A387 GR.11 OR EQ.
14• 200 178
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ. 16" 200 204
z A312 TP321 A240 321 OR EQ. 18" 300 229
- OTHER PARTS : A36 OR EQ. 20" 300 254
22" 300 280
2. SHOE HEIGHT
24" 400 305
H INS. TH'K CODE H INS. TH'K CODE
100 UP TO 75 b 200 126 TO 175 d
150 76 TO 125 e 250 176 TO 225 e
3. SEE OWG. NO. ST-A4-1101H FOR THE DETAil OF SHOE.
SYMBOL & CODING
) )(
PIPE MAT'L
P/S SID. NO. ~-- SHOE HEIGHT
CODE 1HAS¿_X1
~----PIPE SIZE "p"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1123 ANCHOR AS-3
(FOR BARE & SLOP LINE) AQ
6 25
EXISTING STIEEL -"""'-i--i--='---.¡....¡...,¿:=...
OR INSERT PLA TIE
113mm THR'D
"1:NT HOLE
EXISTING STIEEL 25
LIJ E 25
OR INSERT PLA TIE EXISTING STIEEL
26" & LARGER
10" TO 24" OR INSERT PLA TIE UNIT (mm)
PIPE SIZE B A E R
2· 100 31
2-1 2· 100 37
NOTE 3• 150 45
4• 150 58
1. MATIERIAL
5• 150 71
6" 150 85
CODE RUN PIPE PAD 8" 150 110
K API 5L GR.B, A106 GR.B A283 GR.C OR EQ. 10· 150 137
y A335 P11 A387 GR.11 OR EQ.
12· 200 162
w A335 P22 A387 GR.22 OR EQ.
14" 200 178
X A312 TP304, TP316 A240-304 OR EQ.
16" 200 204
z A312 TP321 A240-321 OR EQ.
18"
A333 GR.6 A516 GR.60 OR EQ. 300 229
L
20· 300 254
N A333 GR.3 A203 GR.O OR EQ.
22" 300 280
- OTHER PARTS : A36 OR EQ. 24" 400 305
26" 500 200 450 330
2. SEE DWG. NO. ST-A4-1101 FOR THE DETAil OF SHOE.
28" 530 215 450 356
30" 580 240 450 381
32" 610 255 450 407
34" 660 280 450 432
36" 690 295 450 458
40" 760 330 500 508
42" 810 355 500 534
SYMBOL & CODING
) )( 1)
PIPE MAT'L
P/S SID. NO. SHOE HEIGHT
1ASJ¿OO-X1
PLAN ISO

ANCHOR AS-4 REV.
(FOR COLD INSULA TED PIPE;
URETHANE BLOCK TYPE AO
UNIT (mm)
NOM.
PIPE A B R h\ll t1 t2 BOLT/NUT
SIZE (d, UNC)
1/2 • 100 65 11 11 4.5 6 3/8"
3/4. 110 70 14 11 4.5 6 3/8"
1" 115 75 17 11 4.5 6 3/8"
1-1/2 130 90 25 11 4.5 6 3/8"
EXISTING STEEL 2" 140 100 31 11 4.5 6 3/8"
OR INSERT PLA TE
1/2'' TO 2 1/2'' 2-1/2 160 120 37 11 4.5 6 3/8"
3" 190 140 45 14 4.5 6 1/2"
4" 210 165 58 14 4.5 6 1/2"
5• 240 190 71 14 4.5 6 1/2"
6' 270 215 85 14 4.5 6 1/2"
8" 320 265 110 14 6 9 1/2"
10" 370 315 137 14 6 9 112"
12" 425 370 162 14 6 9 1/2"
14" 480 405 178 14 6 9 1/2"
16" 530 455 204 14 6 9 1/2"
18" 570 505 229 14 6 9 1/2"
20· 630 555 254 14 6 9 1/2"
22" 680 610 280 14 6 9 1/2"
EXISTING STEEL
OR INSERT PLA TE 24" 740 660 305 14 6 9 1/2"
26" 810 725 330 18 9 12 5/8"
28' 860 775 356 18 9 12 5/8'
3" TO 60" 30' 18 12 5/8'
940 815 381 9
32' 970 880 407 18 9 12 5/8'
34• 1020 930 432 18 9 12 5/8'
36' 1070 980 458 18 9 12 5/8'
40" 1180 1090 508 18 9 12 5/8"
42" 1220 1150 534 22 9 12 3/4"
44" 1295 1200 559 22 9 12 3/4"
48' 1390 1250 610 22 9 12 3/4"
52" 1470 1300 661 22 9 12 3/4"
54• 1560 1455 686 22 9 12 3/4"
60" 1720 1605 762 22 9 12 3/4"
o
G
DETAIL FOR BOL T/NUT
COLD INSUL. TH'K SHOE HEIGHT CODE

NOTE 25 N 50 50 a
1. MATERIAL 51 100
N 100 b
- URETHANE FOAM : SEE DWG. NO. ST-M-1022
- PARTS DIRECTL Y \\ELDED TO PIPE : A240-304 OR EQ. 101 N 150 150 e
- BOLT/NUT: A320 88/A194 GR.4 OR EQ. 151 N200 200 d
- OTHER PARTS : A36 OR EQ. 201 N250 250 e
SYMBOL & CODING
AS4-13001-16"-b
P/S STD. NO. SHOE HEIGHT

CODE
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-M-1126
ANCHOR AS-6
(FOR C.S BARE PIPE) AO
PIPE SIZE "p"
TYPI-! TYPl-B
4" ANO SMALLER
a
PIPE SIZE "p"
TYPI-!
5" ANO LARGER
UNIT (mm'
PIPE SIZE MEMBER
DIMENSIONS WEIGHT ALLOW. LOAD (Kg)
NPS •p• a t H L (Kg) Pmax Fmax
1/2" FB 75 X 9 9 6 11 35 0.1 2250 2250
3/4" F8 75 X 9 9 6 14 35 0.1 2250 2200
1· F8 75 X 9 9 6 17 35 0.3 2250 1900
1-1/2" F8 75 X 9 9 6 25 35 0.3 2250 1450
2· FB 75 X 9 9 6 31 35 0.6 2250 1200
2-1 /2" F8100X9 9 6 37 50 0.6 2250 1200
NOTE 3" F8100X9 9 6 45 50 0.8 3000 1500
1. MATERIAL 4• F8100X9 9 6 58 50 0.8 3000 1200
- F8 : A36 OR EQ. 5" 2*A7 9 6 70 - 2.3 3150 2000
6" 2*A7 9 6 83 - 3.3 3150 1670
2. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL. 8" 2*A7 9 6 109 - 4.3 3150 1300
10· 2*A7 9 6 134 - 5.3 3150 1020
12· 2*A7 9 6 160 - 6.4 3150 870
SYMBOL & CODING
( )( )
P/S SID. NO.
SUB-TYPE
PIPE SIZE "p"
' - - - - - PLAN DWG. NO. 'ck
PLAN ISO
--------------------------- -------------------------
REV.
ANCHOR AS-7
(FOR S.S BARE PIPE) AO
PIPE SIZE "D"
4" & SMALLER
PIPE SIZE "p" PIPE SIZE •p•
5" & LARGER
UNIT (mm)
PIPE SIZE DIMENSIONS ALLOW. LOAD (KQ)
MEMBER
NPS "D" a t tl H A L Ll Pmax Fmax
1/2" FB 75 X 9 9 6 - 11 - - 35 2250 2250
3/4" FB 75 X 9 9 6 - 14 - - 35 2250 2200
1· FB 75 X 9 9 6 - 17 - - 35 2250 1900
1-1/2" FB 75 X 9 9 6 - 25 - - 35 2250 1450
2· FB 75 X 9 9 6 - 31 - - 35 2250 1200
2-1/2" FB 100 X 9 9 6 - 39 - - 50 2250 1200
NOTE
3• FB 100 X 9 9 6 - 45 - - 50 3000 1500
1. MATERIAL
4" FB 100 X 9 9 6 - 58 - - 50 3000 1200
- FB : A240-304 OR EQ. 5• 2*A7 9 6 6 70 100 200 - 3150 2000
- REINF. PAD : A240 TYPE 304 OR EQ. 6" 2*A7 9 6 100 - 3150 1670
6 83 200
2. SEE DWG. NO. ST-M-0001 FOR 8" 2*A7 9 6 6 109 100 200 - 3150 1300
THE SIZE OF SHAPE STEEL. 10· 2*A7 9 6 6 134 100 200 - 3150 1020
12" 2*A7 9 6 6 160 100 200 - 3150 1020
SYMBOL & CODING
) )( )
P/S SID. NO.
SUB- TYPE
PIPE SIZE "p"
' - - - - - - - PLAN DWG. NO.
ck PLAN ISO
- - - ------·------------ --

ANCHOR AS-8 REV
(FOR 4. & SMALLER BARE PIPE;
U-BOLT TYPE AO
PIPE SIZE "p" PIPE SIZE "p"

w
U-BOLT PIPE SIZE "p"
UBT
BOLT HOLE "hl&" BOLT HOLE "h~·

DRILL ON EXISllNG BOLT HOLE "hl&"
BEAM
4 <
e e "L" SIZE
B
6 e
L
\ EXISllNG STRUCTURE
UNIT (mm)
FB ALLOW. LOAD (Kg)
PIPE SIZE
NPS "p"
B e h\i "L" SIZE A X T X L X
Wmax Pmax
1/2" 90 36 7 AS FB - SOx6x90 2 240 140
3/4" 90 40 7 AS S0x6x90 2 240 140
1" 90 4S 7 AS SOx6x90 2 240 140
H/2" 120 60 11 AS SOx6x120 2 sso 330
2" 120 7S 11 AS SOx6x120 2 sso 330
2-1/2" lSO 90 14 AS SOx6x1SO 2 1030 S80
3" 180 lOS 14 AS SOx6x180 2 1030 S80
4• 200 13S 18 AS 6Sx9x200 3 1640 900
1. MATERIAL
2. SEE DWG. NO. ST-A4-1001 FOR
- FB : A36 OR EQ. THE DETAil OF U-BOLT.
K APl-SL GR.B, A106 GR.B A307 GR.B
y THE SIZE OF SHAPE STEEL.
A33S P11 A193-B7 /A194-2H
w A33S P22 A193-B7 /A194-2H
X A312 TP304, TP316 A320-B8/A194-8
z A312 TP321 A320-88/A194-8
SYMBOL & CODING
) )( )
~
PIPE MATERIAL
P/S SID. NO. PIPE SIZE "p"
SUB-TYPE
PLAN ISO
L_ _ _ _ _ _ _ -------~----------- - - - - - - - - -
REV
PIPING SUPPORT STANDARD DWG. ST-M-1129 ANCHOR AS-9
(FOR BARE PIPE; U-BAND TYPE) AO
U-BAND U-BAND
(UBD)
(UBD)
PIPE SIZE "p"
PIPE SIZE •p•
e
B
TYPl-A 5" & SMALLER TYPl-B
U-BAND U-BAND
w BOLT HOLE "h!I"
(UBD) BOLT HOLE "h!I" (UBD)
DRILL ON EXISTING BEAM
AA AA
F
l. e
.I B
TYPl-C 6"& LARGER TYPl-D
UNIT (mm)
ALLOW. LOAD (Kg)
PIPE SIZE B e h!I A "L" SIZE
NPS •p• Wmax Pmax Fmax
1· 160 95 18 A6 1375 320 320
1-1/2" 175 110 18 A6 1375 320 320
2" 185 120 18 A6 1375 320 320
2-1/2" 230 155 21 A7 1950 440 440
NOTE
3• 240 170 21 A7 1950 440 440
1. MATERIAL 4• 265 195 21 A7 1950 440 440
- ANGLE ; A36 OR EQ. 5• 290 220 21 A7 1950 440 440
CODE RUN PIPE BAND BOLT & NUT 6" 320 250 21 80 A7 3750 660 660
K APl-SL GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
8" 370 300 21 80 A7 3750 660 660
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
10" 420 355 21 80 A7 3750 660 660
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
X A312 TP304, TP316 A240 TP304 OR EQ. A193-87/A194-2H 12· 470 405 21 80 A7 3750 660 660
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H 14" 510 445 28 90 A10 7000 1580 1580
2. SEE DWG. NO. ST-A4-1003 FOR 16" 560 495 28 90 A10 7000 1580 1580
THE DET AIL OF U-BAND.

THE SIZE OF SHAPE STEEL
SYMBOL & CODING
AS9A-13001-1 ü" -K
PIPE MATERIAL
P/S STO. NO. '------ PIPE SIZE "p"
SUB-TYPE
' - - - - - - PLAN DWG. NO.
PLAN ISO
---·-----~-~-
PIPING SUPPORT STANDARD DWG. ST-A4-1130 ANCHOR AS- 1o REV

(FOR COLD INSULATED PIPE; U-BAND TYPE) AO
U-BAND (UBDC)
R=126 & SMALLER
U-BAND (UBDC)
INS. THI "T"
CRADLE
R=135 & LARGER

NOTE
UNIT (mm)
1. fJA TERIAL COLO INSUL. TH'K SHOE HEIGHT CODE
- PLA TE : A36 OR EQ. 25 ~ 50 50 a
- BOLT & NUT : A307 GR.B-GALV. OR EQ.
51 ~ 100 100 b
2. 2-NUTS ARE REQUIRED PER EACH BOLT. 101 ~ 150 150 e
151 ~ 200 200 d
3. SEE DWG. NO. ST-A4-1104 FOR THE DETAil OF CRADLE.
201 ~ 250 250 e
4. SEE DWG. NO. ST-A4-1004 FOR THE DETAil OF U-BAND ANO ALLOWABLE LOADS.
SYMBOL & CODING
SHOE HEIGHT
P/S STD. NO. CODE
PLAN DWG. NO. ~-- PIPE SIZE "p"
PLAN ISO
REY.
ANCHOR AS-31
(TRUNNION TYPE ON STRUCTURE) AO
PIPE SIZE "p"
"a"EQUALS THE
PIPE SIZE "p" "a"EQUALS THE
a TRUNNION WALL TH'K
ILIV. "I!•
511 \IENT HOLE 511 VEN T HOLE

ILIV• .,-
1
EXISTING SlEEL
TYPl-1
_f EXISTING SlEEL _s
TYPl-T
- --
PIPE SIZE SUPPORT

NPS •p• PIPE
1-1/2" 1·
2" 1-1/2"
3" 2"
4" 2·
6" 4"
8" 4"
10· 6"
12· 8"
14" 8"
NOTE
16" 10"
1. MAlERIAL 18" 10"
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA T'L TABLE. 20" 12"
24" 12"
K API 5L GR.8, A106 GR.B API 5L GR.B OR EQ.
26" 14"
y A335 P11 OR EQ. 28" 14"
A335 P11
30" 16"
w A335 P22 A335 P22 OR EQ.
A312 TP304 OR EQ. 32" 16"
X A312 TP304, TP316
z A312 TP321 A312 TP321 OR EQ. 34" 18"
L A333 GR.6 A333 GR.6 OR EQ. 36" 18"
40" 20·
2. SEE DWG. NO. ST-M-0004 42" 20·
FOR APPLICA TION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
SYMBOL & CODING
) )(
P/S STO. NO. REINF.PAD
(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
PLAN DWG. NO. ----~
ELEV. "F"
PIPE SIZE "p" ELEV. "E" PLAN ISO
-----~-------------------------~----------~------

ANCHOR HAS-31 REV.
(TRUNNION TYPE ON STRUCTURE)
PIPE SIZE "p"
"a"EQUALS THE
TRUNNION WALL TH'K PIPE SIZE "p" • a"EQUALS THE
ILIV. "I•
51!1 VENT HOLE
ILIV. "r"
1
EXISTING STEEL _s
TYPl-1
EXISTING STEEL _f
TYPl-T
PIPE SIZE SUPPORT

NPS •p• PIPE
1-1 /2" 1·
2" 1-1/2"
3• 2·
4• 2"
6" 4"
NOTE 8" 4"
1. MATERIAL 10" 6"
- FOR SUPPORT PIPE : SAIJE AS RUN PIPE OR MAT'L TABLE. 12" 8"
14" 8"
16" 10"
y A335 P11 A335 P11 OR EQ. 18" 10"
w A335 P22 A335 P22 OR EQ. 20· 12"
X A312 TP304, TP316 A312 TP304 OR EQ. 24" 12"
z A312 TP321 A312 TP321 OR EQ.
2. SEE DWG. NO. ST-0004H FOR APPLICATION OF TRUNNION ALLOWABLE LOAD.
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
SUPP'T SERIAL NO.
PIPE MAT'L
(
) )(
HAS31E-009
~ p
ELEV. "F" HAS31E-009
PLAN DWG. NO.
PIPE SIZE "p" ELEV. "E' PLAN ISO

ANCHOR AS-32 REV.
(TRUNNION TYPE FOR ALLOY ANO HEAT
TREA TEO PIPE AO
PIPE SIZE "p"
"a"EQUALS THE
TRUNNION WALL TH'K PIPE SIZE "p" "a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION "Q1"
ILIV. "I•
g¡
"- l -
o<
:es¿
(1)0:: •
>-~~
mu...
~: 1
oo
1
1
"'x ol-
"'o
COLUMN "Q2" 1
< COLUMN "Q2" .....J<
wu
1 ~ G: o:: .
50 VENT HOLE
1
1
o >-~~
mu...
1 "'
ILIV. .,-
1
EXISTING STEEL _ )
TYPIH!
EXISTING STEEL _s
TYPl-T
PIPE SIZE NPS

NPS •p• ·ar:ar
1-1/2" 1·
2· 1-1/2"
3• 2·
4• 2·
6" 4•
8" 4•
10· 6"
12· 8"
NOTE 14" 8"
16" 10·
1. MATERIAL
- TRUNNION "Q1" : SAME AS RUN PIPE OR MAT'L TABLE. 18" 10·
- COLUMN "Q2" : API 5L GR.B OR EQ. 20" 12·
COOE RUN PIPE TRUNNION "Q1" 24" 12·
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 26" 14"
y A335 P11 A335 P11 OR EQ. 28" 14"
w A335 P22 A335 P22 OR EQ. 30" 16"
X A312 TP304, TP316 A312 TP304 OR EQ. 32" 16"
z A312 TP321 A312 TP321 OR EQ. 34" 18"
36" 18"
2. SEE OWG. NO. ST-A4-0004
40" 20·
FOR APPLICATION OF REINFORCING PAO ANO TRUNNION ALLOWABLE LOAOS.
42" 20"
3. IF APPLICABLE ALL TRUNNIONS ON SHOP FABRICA TEO PIPE CAN BE
INSTALLED BY THE SHOP.
SYMBOL & CODING
P/S STO. NO. REINF.PAO

(IF REQ'O)
SUB-TYPE
PIPE MAT'L
SUPP'T SERIAL NO.
PLAN OWG. NO. ----~ ELEV. "F"'
PIPE SIZE "p" ELEV. "[" PLAN ISO
-----------·------------
ANCHOR AS-41 REV.
AO
TRUNNION TYPE ON STRUCTURE
PIPE SIZE "p"
"a"EQUALS THE
"a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION WALL TH'K
PIPE SIZE •p•
~ ....
6 oo
N
Sl'l VENT HOLE
Sl'l VENT HOLE
Cl
x
< o
N N
ó
URETHANE BLOCK URETHANE BLOCK
(URB) (URB)
:;:
~. "r"
~ TYPl-1 ~ ~ TYPl-S ~
PIPE SIZE SUPPORT U.BLOCK

NPS •p• PIPE H1 (mm)
1-1/2" 1· 104
2" 1-1 /2" 104
3• 2· 104
NOTE 4" 2" 104
6" 4• 111
1. MATERIAL
8" 4" 111
10· 6" 114
CODE RUN PIPE SUPPORT PIPE 12· 8" 117
K API SL GR.B, A106 GR.B API SL GR.B OR EQ. 14" 8" 117
L A333 GR.1 OR GR.6 A333 GR.6 OR EQ. 16" 10" 117
X A312 TP304, TP316 A312 TP304 OR EQ. 18" 10" 117
N A333 GR.3 A333 GR.3 OR EQ. 20· 12" 117
24" 12" 117
2. SEE DWG. NO. ST-M-0004 14"
26" 117
FOR APPLICATION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
28" 14" 117
3. SEE DWG. NO. ST-M-1020 FOR THE DETAil OF URETHANE 30" 16" 124
BLOCK ASSEMBL Y(URB) 36" 18" 133
SYMBOL & CODING
'> )( )
(IF REQ'D)
SUB-TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO. - - - - - - - '
PIPE MAT'L
ELEV. "F"
¡,looo
------
ANCHOR AS-42 REV.
PIPING SUPPORT STANDARD OWG. ST-A4-1137 (FOR COLO INSULATED PIPE; AO
TRUNNION TYPE ON STRUCTIJRE)
•o"EQUALS THE
TRUNNION WALL TH'K "o"EQUALS THE
TRUNNION WALL TH'K
PIPE SIZE "p"
ILIV. "I•
COLUMN "Q2"
ILIV. "F"
EXISTING STEEL f L EXISTING STEEL
TYPl-1 TYPl-T
PIPE SIZE NPS U.BLOCK

NPS "p" "Q1","Q2" H1(mm)
1-1/2" 1· 104
NOTE 2" 1-1/2" 104
3" 2" 104
1. MATERIAL
4• 2· 104
- TRUNNION "Q1" : SAME AS RUN PIPE OR MA T'L TABLE.
- COLUMN "02" : API 5L GR.B OR EQ. 6" 4" 111
8" 4• 111
CODE RUN PIPE TRUNNION "Q1 •
10· 6" 114
A333 GR.1 OR GR.6 A333 GR.6 OR EQ. 12· 8" 117
L
X A312 TP304, TP316 A312 TP304 OR EQ. 14" 8" 117
N A333 GR.3 A333 GR.3 OR EQ. 16" 10· 117
18" 10· 117
20" 12" 117
2. SEE DWG. NO. ST-A4-0004
24" 12" 117
FOR APPLICA TION OF REINFORCING PAD AND TRUNNION ALLOWABLE LOADS.
26" 14" 117
3. SEE DWG. NO. ST-A4-1020 FOR THE DETAil OF URETHANE
BLOCK ASSEMBL Y(URB)
28" 14" 117
30" 16" 124
36" 18" 133
SYMBOL & CODING
) )( )
P/S SID. NO. REINF.PAD
(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
PLAN DWG. NO.
ELEV. "F"
1 Aloool
-----------------------------------

ANCHOR AS-50 REY.
(U-BOLT TYPE ON STRUCTURE) AO
3mm CLEARANCE
-~-SIZE "p"
BOLT HOLE "hlll" /
EXISTING STEEL
EXISTING STEEL
TYPl-A
3mm CLEARANCE
BOLT HOLE "hlll" /
EXISTING STEEL
\ EXISTING STEEL
1. MATERIAL
- ANGLE : A36 OR EQ. TYPl!-B
y A335 P11 A193-87 /A194-2H UNIT (mm)
w A335 P22 A193-87 /A194-2H
PIPE SIZE ALLOWABLE
X A312 TIP304, TIP316 A320-88/A194-8 NPS "p'
MEMBER SIZE 'M e llh
LOAD(Kg)
z A312 TIP321 A320-88/A194-8 112· A5 35 7 140
2. USE THIS SUPPORT ON 2" ANO SMALLER SOCKET WELD, 3/4' 40 7 140
SCREWED ANO NON-WELDABLE PIPE. 1· 45 7 140
3. SEE DWG. NO. ST-M-1001 FOR THE DETAil OF U-BOLT. 1-1/2" 60 11 330
2" 75 11 330
SYMBOL & CODING
( 1 (
) 1 )
PIPE MATERIAL
P/S SID. NO. DIMENSION "A"
1 AlA-0091
SUB-TYPE ' - - - - - - - PIPE SIZE "p"
SUPP'T SERIAL NO. _ ____,
~---- PLAN DWG. NO.
PLAN ISO
---·----~----------------------------------------------------·~-----·

OIRECTIONAL STOP oF- 3 1 REY.
(lRUNNION TYPE ON F/D) AO

"a" EQUALS lHE
PIPE SIZE "p" lRUNNION WALL lH'K a PIPE SIZE •p• NO CLEARANCE(TYP.)
ILIV. "I•
5\l VENT HOLE

SLIDING PLA TE
x
< 4-EXPANSION
3 ANCHOO BOLTS "t
BASE PLATE
ILIV. "r" ILIV. "r"
.....
"··: j ~·-~. .. ·.: .•
TYPl-P
(ON FOUNDA TION)
2[
TYPl-P
(ON PAVlNG)
•a" EQUALS lHE
~ºI.
PIPE SIZE "p" a lRUNNION WALL lH'K a PIPE SIZE "p"
30.I A 13J 1.3º
_my. "l.
UNIT (mm)
PIPE SIZE SUPPORT BASE PLATE
NPS "p" PIPE A t1 t2 dll
oo oo
N 1-1/2" 1· 140 6 6 13.5
~
51! VENT HOLE :r:,¿ 2· 1.1 2· 140 6 6 13.5
x <(
3•
< 2· 140 6 6 13.5
3 3
4" 2· 140 6 6 13.5
6" 4• 160 9 9 13.5
8" 4• 160 9 9 13.5
ILIV. "r" 10· 6" 210 12 12 17.5
ILIV.
GROUTING 12· a· 260 12 12 17.5
14" 8" 260 12 12 17.5
16" 10·
..
.. ·-: ..
18" 10·
320
320
16
16
16
16
17.5
17.5
TYPl-S 20· 12· 350 16 16 17.5
(ON FOUNDATION) TYPl-T 24" 12" 350 16 16 17.5
NOTE (ON PAVlNG) 28" 14" 400 16 16
1. MATERIAL
CODE RUN PIPE SUPPORT PIPE - ANGLE : A36 OR EQ. 2. SEE DWG. NO. ST-M-1032
K API 51.. GR.B, A106 GR.B API 5L GR.B OR EQ. FOR lHE DETAil OF EXPANSION
y A335 Pll OR EQ. ANCHOR BOLT(BPLR) OF TYPE-P & T.
A335 P11
w A335 P22 A335 P22 OR EQ. 3. SEE DWG. NO. ST-M-0004
A312 TP304 OR EQ. FOR APPLICATION OF REINFORCING PAD
X A312 TP304, TP316 AND TRUNNION ALLOWABLE LOADS.
z A312 TP321 A312 TP321 OR EQ.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE lRUNNINON
SUPP'T SERIAL NO. MAT'L
'----ELEV. "F"
PLAN DWG. NO. - - - - - - '
PIPE SIZE •p• ' - - - - - - - - ELEV. "E"
PLAN ISO
1
---·-------------~ - - - --------- - - _ I

DIRECTIONAL STOP HDF- 31 REV.
TRUNNION TYPE ON F/D) AQ
"a" EQUALS THE

PIPE SIZE •p• TRUNNION WALL TH'K
NO CLEARANCE(TYP.)
oo
00
x< 1 1 1 1
~
~ ~
ILIV. "r" 4" & SMALLER
TYPl-r
(ON FOUNDATION)
PIPE SIZE "p"
6" TO 24"
oo
00
x
<
~
UNIT (mm)
ILIV. "r" PIPE SIZE SUPPORT BASE PLATE
NPS 'p' PIPE A t1
1-1/2" 1· 140 9
2· 1.1 /2" 140 9
3• 2· 140 9
TYPl-S
4• 2· 160 16
(ON FOUNDATION)
NOTE 6" 4• 160 16
1. MATERIAL a· 4• 160 16
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MAT'L TABLE. 10· 6" 210 16
CODE RUN PIPE SUPPORT PIPE 12" a· 260 20
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 14" a· 320 20
y A335 P11 A335 P11 OR EQ. 16" 10· 320 20
w A335 P22 A335 P22 OR EQ. 18" 10· 350 20
X A312 TP304, TP316 A312 TP304 OR EQ.
20· 12· 350 20
z A312 TP321 A312 TP321 OR EQ.
24" 12" 460 20
2. SEE DWG. NO. ST-A4-0004H FOR APPUCATION OF TRUNNION ALLOWABLE LOAD.
SYMBOL & CODING
P/S STD. NO.

SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
~--ELEV. "F" HDF31F-009
PLAN DWG. NO. - - - - - - ' HDF31F-009
PIPE SIZE •p• ' - - - - - - ELEV. "E"
PLAN ISO
DIRECTIONAL STOP DF- 3 2 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1142 (TRUNNION TYPE FOR ALLOY AND AQ
HEAT TREATED PIPE
PIPE SIZE •p• PIPE SIZE •p• NO CLEARANCE(TYP.)
TYP.
oo
N
TYP. 6
4-d~
ILIV. 'T
TYPE-F D~D
(ON FOUNDA TION) TYPl-P
(ON PA'v1NG)
+ -+
a"EOUALS THE
PIPE SIZE •p• NNION IVALL TH'l< a PIPE SIZE •p•
a::
o
CL 1-
_!LIY. "l. ~ ~2
UNIT (mm)
~ ~~ .----.---.---------~
PIPE SIZE NPS BASE PLATE
NPS •p• ·ar:a2· A t1 t2 d~
H/2" 1" 140 6 6 13.5
2· 1.1 2· 140 6 6 13.5
3• 2" 140 6 6 13.5
COLUMN "02"
4• 2· 140 6 6 13.5
6" 4• 160 9 9 13.5
8" 4• 160 9 9 13.5
10· 6" 210 12 12 17.5
12· 8" 260 12 12 17.5
ILIV. 'T 14" 8" 260 12 12 17.5
16" 10· 320 16 16 17.5
18" 10· 320 16 16 17.5
- .......... <IJ" ·-.. _--: - 20· 12" 350 16 16 17.5
NOTE TYPl-S 24• 12" 350 16 16 17.5
1. MATERIAL (ON FOUNDATION)
TYPl-T
- PLA TE : A36 OR EO.
(ON PA'v1NG) 2. SEE DWG. NO. ST-M-1032
- TRUNNION "01" : SAME AS RUN PIPE OR MAT'L TABLE.
FOR THE DETAil OF EXPANSION
ANCHOR BOLT(BPLR)
K API SL GR.B, A106 GR.B API 5L GR.B OR EO.
- ANGLE : A36 OR EO.
Y A335 P11 A335 P11 OR EO. • 3. SEE DWG. NO. ST-M-0004
W A335 P22 A335 P22 OR EO. - COLUMN 02" : API 5L GR.B OR EO. FOR APPLICATION OF REINFORCING PAD
X A312 TP304, TP316 A312 TP304 OR EO. AND TRUNNION ALLOWABLE LOADS.
Z A312 TP321 A312 TP321 OR EO. 4. IF APPLICABLE ALL TRUNNIONS ON
O ASTM B444 GR.1 ASTM B444 GR.1 OR EO. SHOP FABRICA TED PIPE CAN BE
N A333 GR.3 A333 GR.3 OR EO. INSTALLED BY THE SHOP.
SYMBOL & CODING

(IF REO'D)
SUB-TYPE
TRUNNINON
PLAN DWG. NO. ----~ ~--ELEV. "F"
( JA0-13001)
PIPE SI ZE "p" ~----- ELEV. "E"
PLAN ISO
-----------------------------~---------
REV.
3-WAY STOP DF-33
PIPE SIZE •p•

PIPE SIZE "p" 'a"EQUALS THE
a lH\JNNKJl WN.L lll'K a
ILIV. "I"
oo 51! VENT HOLE

N
NO CLEARANCE(TYP.)
BASE PLATE TYP.
ILIV. "r ILIV. "P"
GROUTING
TYPl-P
(ON FOUNDATION) TYPl-P
(ON PA'v1NG)
"a"EQUALS TI-JE
PIPE SIZE "p"

UNNION WALL TH'K a 3o, l l3ol A,~oll;o
ILIV. "I"
----- _ _ _QY,_ "I"
UNIT (mm)
NPS 'p' PIPE A t1 t2 dql
g 1-1/2" 1· 140 6 6 13.5
N
2· 1.1 2· 140 6 6 13.5

50 VENT HOLE 3• 2· 140 6 6 13.5
SLIDING PLA TE 4• 2· 140 6 6 13.5
4-EXPANSION 6" 4• 160 9 9 13.5
ANCHOR BOL TS "J"
8" 4• 160 9 9 13.5
BASE PLATE
ILIV. "r 10· 6" 210 12 12 17.5 2·
12" 8" 260 12 12 17.5
14' 8" 260 12 12 17.5
16" 10· 320 16 16 17.5
18' 10· 320 16 16 17.5
TYPB-S
20· 12· 350 16 16 17.5
(ON FOUNDATION)
TYPl-T 24' 12· 350 16 16 17.5
1. MATERIAL (ON PA'v1NG)

- OTHERS : A36 OR EQ.
CODE RUN PIPE SUPPORT PIPE FOR THE DETAil OF EXPANSION
K API 5L GR.B, A106 GR.8 API 5L GR.8 OR EQ. ANCHOR BOL T(BPLR) OF TYPE-P & T.
y A335 P11 A335 P11 OR EQ. 3. SEE DWG. NO. ST-A4-0004
w A335 P22 A335 P22 OR EQ. FOR APPLICATION OF REINFORCING PAD
AND TRUNNION ALLOWABLE LOADS.
X A312 TP304, TP316 A312 TP304 OR EQ.
z A312 TP321 A312 TP321 OR EQ.
o ASTM 8444 GR.1 ASTM 8444 GR.1 OR EQ.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE TRUNNINON
SLJpp'T SERIAL NO. MAT'L
PLAN DWG. NO. '------ ELEV. "F"
PIPE SIZE "p"

~---- ELEV. T
PLAN ISO
REY.
3-WAY STOP HDF -33
TRUNNION TYPE ON F/D)
PIPE SIZE •p• "a"EQUALS THE

o lRUNNION WAll TH'K
ILIV. "I:•
NO CLEARANCE(TYP.)
ILIV. 'T 4" & SMALLER
. ..
. . .... ~ . . ";. ·.. .: .
TYPl-1
(ON FOUNDATION)
"a"EQUALS THE A5
a lRUNNION WALL TH'K (HEIGHT 50)
PIPE SIZE •p•
6" TO 24"
oo
00
x
<
~
UNIT (mm)
ILIV. 'T PIPE SIZE SUPPORT BASE PLATE
NPS 'p" PIPE A t1
1-1/2" 1· 140 9
2· 1.1 /2" 140 9
3• 2" 140 9
TYPl-S
NOTE 4• 2" 160 16
(ON FOUNDATION)
1. MATERIAL 6" 4" 160 16
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA T'L TABLE. a· 4" 160 16
- OTHERS : A36 OR EQ. 10· 6" 210 16
CODE RUN PIPE SUPPORT PIPE 12· a" 260 20
K API 5L GR.8, A106 GR.B API 5L GR.B OR EQ. 14" a· 320 20
y A335 P11 A335 P11 OR EQ. 16' 10· 320 20
w A335 P22 A335 P22 OR EQ.
18" 10· 350 20
X A312 TP304, TP316 A312 TP304 OR EQ.
20· 12· 350 20
z A312 TP321 A312 TP321 OR EQ.
12·
24" 460 20
2. SEE DWG. NO. ST-A4-0004H FOR APPLICATlON OF TRUNNION ALLOWABLE LOAD.
SYMBOL & CODING
P/S sm. NO.

SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
ELEV. "F' HDF33F-009
PLAN DWG. NO. HDF33F-009
' - - - - - - - ELEV. "E"
PIPE SIZE •p•
PLAN ISO

3-WAY STOP oF-34 REV.
(TRUNNION TYPE FOR ALLOY ANO K!J
HEA T TREA TED PIPE
PIPE SIZE "p"

PIPE SIZE "p" •o"EOUALS THE
lRUNNl<Jl WAl.l lH'K o
ILIV. T
COLUMN "02" oo
oo N
N ~~:~~%º~j NO CLEARANCE(TYP.)
BASE PLATE
GROUTING
ILIV. T ILIV. •r
TYPE-F
(ON FOUNDATION)
TYPE-P
(ON PA'v1NG)
PIPE SIZE "p" o:::

o
a.. 1-
3o. l [3ol. A • ~ol I ~o
o«:
:e S2 ~
~
(/)0:::
>-~ t::, UNIT (mm)

00 LL
TRUNNION "01" PIPE SIZE NPS BASE PLATE

NPS "p" ·01·:02· A t1 t2 d91
o:::
o 1-1/2" 1· 140 6 6 13.5
oo o>-
- ' <(
wU
2· 1.1 2· 140 6 6 13.5
~
~
¡:¡:(E 3•
~
COLUMN "02" 2· 140 6 6 13.5
:e x >-~
< 00 LL 4• 2· 140 6 6 13.5
2- 6" 4• 160 9 9 13.5
8" 4" 160 9 9 13.5
10" 6" 210 12 12 17.5
12" 8" 260 12 12 17.5
ILIV. •r 14" 8" 260 12 12 17.5
16" 10" 320 16 16 17.5
18" 10" 320 16 16 17.5
20" 12" 350 16 16 17.5
TYPE-S 24" 12" 350 16 16 17.5
NOTE (ON FOUNDATION)
TYPE-T
1. MATERIAL (ON PA'v1NG)
- TRUNNION "01'' : SAME AS RUN PIPE OR MAT'L TABLE. 2. SEE DWG. NO. ST-A4-1032
CODE RUN PIPE TRUNNION "Q1" FOR THE DETAil OF EXP ANSION
K API 5L GR.B, A106 GR.B - ANGLE : A36 OR EQ. ANCHOR BOLT(BPLR) OF TYPE-P & T.
API 5L GR.B OR EQ.
y A335 P11 A335 P11 OR EQ. - COLUMN "Q2" : API 5L GR.B OR EQ. 3. SEE DWG. NO. ST-A4-0004
w A335 P22 A335 P22 OR EQ. FOR APPUCA llON OF REINFORCING PAD
X A312 TP304, TP316 A312 TP304 OR EQ. ANO TRUNNION ALLOWABLE LOAOS.
z A312 TP321 A312 TP321 OR EQ. 4. IF APPUCABLE ALL TRUNNIONS ON
SHOP FABRICA TED PIPE CAN BE
o ASTM B444 GR.1 ASTM B444 GR.1 OR EQ. INSTALLED BY THE SHOP.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE TRUNNINON
PLAN DWG. NO. ' - - - - ELEV. "F"
PIPE SIZE "p" ~---- ELEV. "E"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1151 DIRECTIONAL STOP 0 S- 1
(FOR HOT INSULA TED PIPE; SHOE TYPE) AO
PIPE SIZE "p• PIPE SIZE 'p"
INS. TBI "T• INS. TBI Y
4" & SMALLER 5" & 8"
PIPE SIZE "p"

INS. TBI "T• UNIT (mm)
PIPE
SIZE ~M[jf:
NPS'P' ax max ax max ax Fmax
2· 650 1230 600 830
3• 900 1230 630 830 460 630 360 500
·4" 1400 1230 1000 830 760 630 600 500
5• 2100 1230 1400 830 1100 630 900 500
8. 3900 1230 2700 830 2100 630 1700 500
1o·N12 C15 17000 5400 14100 4600 12000 3500 10000 2800
11 14"N18 C20 17600 8.300 14600 7000 12500 5700 10900 4600
2o•N40 H20 18000 7900 15200 6700 13000 5800 11400 5100
• 11 • 25
25 600 25
10" TO 24" NOTE
1. MATERIAL
- PLATE & PAD : SAME AS RUN PIPE OR MAT'L TABLE.
W PIPE SIZE "p" w ~3mm THR'D

- SHAPE STEEL : A36 OR EQ.
•')~\t INS. TBI "T•

VENT HOLE CODE
K
RUN PIPE
A53 GR.8, A106 GR.B
PAD
A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP.316 A240-304 OR EQ.
MEMBER "M"
z A.312 TP321 A240-321 OR EQ.
2. SHOE HEIGHT
H INS. TH'K T CODE
100 UP TO 75 b
150 76 TO 125 e
200 126 TO 175 d
~ 250 176 & OVER e
750
26" & LARGER 4. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
) JE )
P/S STO. NO. PIPE MAT'L
PLAN DWG. NO. - - - - '
PIPE SIZE "p" ~---DIM

~~8t HEIGHT
"A"
losLi
PLAN ISO
REV.
PIPING SUPPORT STANDARD OWG. ST-A4-1151H
DIRECTIONAL STOP HDS-1
FOR HOT INSULA TED PIPE; SHOE TYPE)
PIPE SIZE •p•
INS. TBI •r INS. THK "T"
3" & SMALLER 4"
PIPE SIZE "p"

INS.THK•r ~~~~~~~~~
UNIT (mm)
PIPE SIZE MEMBER

NPS"P" "M"
2" -
3" -
4" H10
6" H10
8" H15
10· H15
f----A-_j 12· H15
25 600 25
6" TO 12"
1. MATERIAL
- SHAPE STEEL · A36 OR EQ
CODE RUN PIPE PAD
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
2. SHOE HEIGHT
H INS. TH'K "T" CODE
100 UP TO 75 b
150 76 TO 125 e
200 126 TO 175 d
250 176 & OVER e
4. SEE DWG. NO. ST-A4-1101H FOR THE DETAil OF SHOE.
SYMBOL & CODING
'! JE )
y(
HOS~-XI
P/S sm. NO. PIPE MAT'L
PLAN DWG. NO. SHOt HEIGHT

COD 1 1 H),+xl
PIPE SIZE •p• DIM "A"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1153 DIRECTIONAL STOP ÜS- 3
(FOR BARE & SLOP UNE) AO
4" & SMALLER 5" & 8"
PIPE SIZE "p"
UNIT (mm)
PIPE
SIZE MEMBER
NPS"P" "M"
3 -
4 -
6 -
8 -
10 N12 C15
14.. N18" C20
w·N40" H20
25 600 25
10" TO 24"
w w 113mm THR'D NOTE

VENT HOLE 1. MATERIAL
CODE RUN PIPE PAD
MEMBER "M" K A53 GR.B, A106 GR.B A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
L A333 GR.6 A516 GR.60 EQ.
N A333 GR.3 A203 GR.O EQ.
µ__j
750
2. SEE OWG. NO. ST-A4-1107 FOR THE DETAil OF SHOE.
26" & LARGER 3. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
) JE )
IDs.>-~o-xl
P/S STO. NO. PIPE MAT'L
PLAN DWG. NO. _ ____, ~-- SHOE HEIGHT
PIPE SIZE "p" ~--- DIM "A"

PLAN ISO
- - - - · - - - - - - - - - - - - - - · - - - · - - --
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1156 DIRECTIONAL STOP 0 S- 6
(FOR BARE PIPE) AO
100 A PIPE SIZE •p•

PIPE SIZE •p•
:e o
"'
9 50
2" TO 8" 10" TO 16"
PIPE SIZE •p•
UNIT (mm)
PIPE SIZE MEMBER ALLOW. LOAC
NPS •p• t1 H L "M' F (Kg)
2" 6 - - - 1000
:e o 3• 9 - - - 1100
"' 4• 9 - - - 1500
6" 9 - - - 1450
8" 9 - - - 1550
10" - 170 100 C15 6300
12· - 166 100 C15 6300
NPS 18" THRU 30" 14" - 181 115 C20 8500
16" - 176 115 C20 8500
18" - 223 220 H20 8000
20" - 221 220 H20 7000
24• - 217 220 H20 5600
26" - 216 220 H20 5600
28" - 214 220 H20 5600
30" - 213 220 H20 5600
1. MATERIAL 32" - 212 220 H20 5600
- SHAPE STEEL. : A36 OR EQ.
CODE RUN PIPE LUG PLATE
K API SL GR.B, A106 GR.B A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
N A333 GR.3 A333 GR.3 OR EQ.
2. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
) JE )
~
P/S SID. NO.
PLAN DWG. NO.

PIPE MAT'L
BEAM WIDTH
PIPE SIZE "p"

~
PLAN
~ ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1156H DIRECTIONAL STOP
FOR BARE PIPE)
HDS-6
100 A PIPE SIZE "p"

PIPE SI ZE "p"
1-1/2" TO 3" 4" TO 12"
PIPE SIZE "p"
o
"'
14" TO 24"
UNIT (mm)
PIPE SIZE MEMBER
NPS "p" tl L "M"
2· 9 - -
3• 9 - -
4" 9 100 H10
6" 9 100 H10
8" 9 100 H15
1. MATERIAL 10· 9 100 H15
- PLATE & PAD : SAME AS RUN PIPE OR MAT'L TABLE. 12· 9 100 H15
- SHAPE STEEL. : A36 OR EQ. 14" 9 115 H20
CODE RUN PIPE PAD 16" 9 115 H20
K API SL GR.8, A106 GR.8 A283 GR.C OR EQ. 18" 9 220 H20
y A335 P11 A387 GR.11 OR EQ. 20· 9 220 H20
w A335 P22 A387 GR.22 OR EQ. 24" 9 220 H20
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
SYMBOL & CODING
) JE
~
P/S STO. NO.
PLAN DWG. NO.

PIPE MAT'L
BEAM WIDTH
PIPE SIZE "p"

IHLI
PLAN
~ ISO

3-WAY STOP DS-7 REV.

PIPE SIZE "p"
INS. TRI •T" INS. TRI "T•
600 25
4" & SMALLER 5" & 8"

UNIT (mm)
PIPE AliOWABLE LOADS FOR EACH SHOE HEIGHT K
F T MQl!i[R M~MB~R H=100
PIPE SIZE •p• SIZE M M1 H=150
ax mox mox ax max max
ms.TBIC·T" ~---;-----~ r 100 9 A6 650 1230 200 600 830 150
3• 100 9 A6 900 1230 200 630 830 150
4• 100 9 A6 1400 1230 360 1000 830 240
5• 100 9 A6 2100 1230 530 1400 830 360
8" 100 9 A6 3900 1230 1000 2700 830 760
1o•N12• - C15 A7 17000 5400 1700 14100 4600 1700
14"N18· - C20 A7 17600 8300 1700 14600 7000 1700
2o•N40 - H20 A7 18000 7900 1700 15200 6700 1700
PIPE AliOWABLE LOADS FOR EACH SHOE HEIGHT K

SIZE F M M~~~R
T MQl!i[R H=200 H=250
ax max mox mox max
3• 100 9 A6 460 630 110 500 90
4• 100 9 A6 760 630 180 500 120
25 .11 .. s· 100 9 A6 1100 630 270 500 220
(TYP.) 25 600 8. 100 9 A6 2100 630 590 500 480
25 10·N12" -
10" TO 24" C15 A7 12000 3500 1700 2800 1700
14"N18· - C20 A7 12500 5700 1700 4600 1700
2o•N40 - H20 A7 13000 5800 1700 5100 1700
W PIPE SIZE "p" w NOTE

1. MATERIAL
:~~\;{ INS. TBIC •T" - PLA TE & SHAPE STEEL : A36 OR EQ.
- PAD : SAME AS RUN PIPE OR MA T'L TABLE.
COOE RUN PIPE PAD
K A53 GR.8, A106 GR.B A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
f--A-l 4. SHOE HEIGHT
750 H INS. TH K "T" CODE
100 UP TO 75 b
150 76 TO 125 e
26" & LARGER 200 126 TO 175 d
250 176 & OVER e
SYMBOL & CODING
PLAN DWG. NO. - - - - ' SHOE HEIGHT

COOE
PIPE SIZE "p" '------- DIM ªA"
PLAN ISO
- - - - - - - - - - - ·-·---·- -
3-WAY STOP DS-8 REY.
(FOR BARE & SLOP UNE) AQ
4" & SMALLER 5" & 8"

UNIT (mm)
PIPE F MEMBE¡; MEMBE¡;
PIPE SIZE •p• SIZE T
"M" "M1"
3 100 9 - A6
4 100 9 - A6
6 100 9 - A6
8 100 9 - A6
10 N12 - - C15 A7
14 N18 - - C20 A7
20 N40 - - H20 A7
PIPE F MEMBH MEMBE¡;

SIZE T
"M" "M1"
3 100 9 - A6
4 100 9 - A6
25 .11 • 6 100 9 - A6
(TYP.) 25 600
a~
100 9 - A6
10 N12 - - C15 A7
25
10" TO 24" 14 N18 - - C20 A7
20 N4!J - - H20 A7
NOTE
1. MATERIAL
- PLA TE & SHAPE STEEL : A36 OR EQ.
COOE RUN PIPE PAD

K A53 GR.8, A106 GR.B A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
L A333 GR.6 A516 GR.60
µ__j N A333 GR.3 A203 GR.8
750
26" & LARGER 3. SEE OWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
P/S SID. NO. PIPE MATL
PLAN DWG. NO. --~ SHOE HEIGHT
PIPE SIZE "p" ~--- DIM "A"

PLAN ISO
REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1160 (1 /4)
DIRECTIONAL STOP DS-31
(TRUNNION T'r'PE ON STRUCTURE) AO
PIPE SIZE "p"
"~O EQIJALS THE

'' a TRUNNION WALL TH'K
PIPE SIZE •p•
'
1 '
'('--F-- -
1
~.·r
--tL-----~----- ""
' oo 1
1
1
' ~ 1
S!OI VENT S!OI VENT 1
x
HOLE \ ! <(
c.
HOLE \ 1
1 6
~h~I~._,
f\ i
T )
~. "}"' ~+---r ·-~1 n}S
1
(
)
~ EXISTING STEEL
_j
TYPl-1
- -- TYPl-T
- --
3mm l A •
TW4rtiJtr 1
BASE PLATE UNIT (mm)

PIPE SIZESUPPORT BASE PLATE
NPS 'p' PIPE A t
1-1/2" 1· 140 6
NOTE
2" 1.112· 140 6
1. SEE DWG. NO. ST-A4-0004 3" 2" 140 6
FOR APPLICATION OF REINFORCING PAD 4• 2" 140 6
ANO TRUNNION ALLOWABLE LOADS. 6" 4• 160 9
8" 4• 160 9
2. MATERIAL
10· 6" 210 12
12· 8" 260 12
14" 8" 260 12
16" 10· 320 12
K API 5L GR.B, A106 GR.B API SL GR.B OR EQ.
y 18" 10· 320 12
A335 P11 A335 P11 OR EQ.
20" 12· 350 12
w A335 P22 A335 P22 OR EQ.
A312 TP304 OR EQ. 24" 12· 350 12
X A312 TP304, TP316
28" 14•
z A312 TP321 A312 TP321 OR EQ. 400 16
L A333 GR.6 OR EQ. A333 GR.6 OR EQ. 30" 16" 450 16
N A333 GR.3 OR EQ. A333 GR.3 OR EQ. 36" 18" 500 22
SYMBOL & CODING
P/S sm. NO.

SUB- T'r'PE
1
SUPP'T SERIAL NO. -

PLAN DWG. NO.
~31f-009-.!lQQ1-_!f-1!§~-IJ1500-~!:_
~
1
~ REINF.PAD
(IF REQ'D)
TRUNNINON
MAT'L
ELEV. ''F" 1 DS3lrml
1 p
1 DS3)._009 I
PIPE SIZE •p• ELEV. "E"
PLAN ISO
PIPING SUPPORT STANDARD DWG. ST-A4-1160 (2/4)

DIRECTIONAL STOP OS - 3 2 REY.
(TRUNNION TYPE ON STRUCTURE AO
FOR ALLOY & SS PIPE
PIPE SIZE "p"

"a" EQUALS THE
o TRUNNION WALL TH'K
ILIV. -r'
oo
"'
ILIV. "r"
~ EXISTING STEEL __J

TYPl-1 TYPl-T

NPS "p" PIPE A t
NQIE 1-1/2" 1· 140 6
1. SEE DWG. NO. ST-A4-0004 2" 1.1/2" 140 6
FOR APPLICATION OF REINFORCING PAD 3• 2" 140 6
ANO TRUNNION ALLOWABLE LOADS. 4• 2" 140 6
6" 4• 160 9
2. MATERIAL
8" 4• 160 9
10· 6" 210 12
- TRUNNION "Q1" : SAME AS RUN PIPE OR MArL TABLE.
12· 8" 260 12
CODE RUN PIPE TRUNNION 'Q1" 14" 8" 260 12
K API 5L GR.8, A106 GR.B API 5L GR.B OR EQ. 16" 10· 320 12
y A335 Pll A335 Pl 1 OR EQ.
18" 10· 320 12
w A335 P22 A335 P22 OR EQ.
X A312 TP304, TP316 A312 TP304 OR EQ. 20· 12· 350 12
z A312 TP321 A312 TP321 OR EQ. 24" 12· 350 12
o ASTM 8444 GR.1 ASTM 8444 GR.1 OR EQ. 28" 14" 400 16
N A333 GR.3 A333 GR.3 OR EQ. 30" 16" 450 16
- ANGLE : A36 OR EQ. 36" 18" 500 22
- COLUMN "Q2" : API 5L GR.B OR EQ.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE TRUNNINON
SUpp'T SERIAL NO. MArL
~-- ELEV. "F"
PLAN DWG. NO. ---~
PIPE SIZE "p" ~---- ELEV. "["
PLAN ISO
--------------- ---
REV.
3-WAY STOP DS-33
PIPE SIZE •p•

"a" EQUALS THE
oo
N
5~ VENT
HOLE
ILBV• .,.
L__ EXISTING STEEL _J

TYPl-1 TYPl-T

NPS •p• PIPE A t
NOTE 1-1/2" 1· 140 6
1. SEE DWG. NO. ST-A4-0004 2" 1.1 /2" 140 6
FOR APPLICATION OF REINFORCING PAD 3" 2· 140 6
ANO TRUNNION ALLOWABLE LOADS. 4" 2· 140 6
6" 4• 160 9
2. MATERIAL
8" 4• 160 9
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MAIL TABLE.
10· 6" 210 12
12· 8" 260 12
14" 8" 260 12
K API 5L GR.8, A106 GR.8 API 5L GR.B OR EQ.
16" 10· 320 12
Y. A335 P11 A335 P11 OR EQ.
18" 10· 320 12
w A335 P22 A335 P22 OR EQ.
A312 TP304 OR EQ. 20· 12· 350 12
X A312 TP304, TP316
24" 12·
z A312 TP321 A312 TP321 OR EQ. 350 12
N A333 GR. 3 OR EQ. A333 GR.3 OR EQ. 36" 18" 500 22
SYMBOL & CODING
P/S STD. NO. REINF.PAD

(IF REQ'D)
SUB-TYPE TRUNNINON
~--ELEV. "F"
PLAN DWG. NO. _ _ _____J
PIPE SIZE "p" ' - - - - - - ELEV. "E"
PLAN ISO

3-WAY STOP DS-34 REY.
(TRUNNION TYPE ON STRUCTURE
FOR ALLOY & SS PIPE AO
PIPE SIZE "p"

"a" EQUALS THE
o TRUNNION WALL TH'K
PIPE SI ZE •p•
ELJN. ·r
so
N
ELJN. .,..
EXISTING STEEL _J
TYPE-E TYPE-T

NOTE NPS "p" PIPE A t
1-1/2" 1· 140 6
FOR APPLICATION OF REINFORCING PAD 2'' 1.1 /2" 140 6
AND TRUNNION ALLOWABLE LOADS. 3" 2" 140 6
4" 2" 140 6
2. MATERIAL
6" 4" 160 g
8" 4" 160 g
- TRUNNION "Q1" : SAME AS RUN PIPE OR MA T'L TABLE.
10" 6" 210 12
CODE RUN PIPE TRUNNION "Ql" 12" 8" 260 12
K API SL GR.8, A106 GR.B API SL GR.B OR EQ. 14"
y 8" 260 12
A335 Pll A335 Pl 1 OR EQ.
16" 10' 320 12
w A335 P22 A335 P22 OR EQ.
X A312 TP304, TP316 A312 TP304 OR EQ. 18" 10" 320 12
z A312 TP321 A312 TP 321 OR EQ. 20" 12" 350 12
N A333 GR.3 A333 GR. 3 OR EQ. 30" 16" 450 16
- ANGLE : A36 OR EQ. 36" 18" 500 22
- COLUMN "Q2" : API 5L GR.B OR EQ.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE TRUNNINON
---ELEV. "F"
PLAN DWG. NO. ---~
PIPE SIZE "p" ~---- ELEV. "E'
PLAN ISO
PIPING SUPPORT STANDARD DWG. ST-A4-1160H(1/2)

DIRECTIONAL STOP HDs- 31 REV.
TRUNNION TYPE ON STRUCTURE) AO
PIPE SIZE "p"

"a" EQUALS THE
PIPE SI ZE •p•
gco
oo
x 5~ VENT co
:;i HOLE x
<(
~
11.!V• .,.
L____ EXISTING STEEL !__j

TYPl-1 TYPl-T
NO CLEARANCE • A , 1 NO CLEARANCE A
m.~rDfil ~l·~~:Gm ~mm)

10
11
TIP
50.1 1.
BASE PLATE
UNIT (mm)
NPS "p" PIPE A tl
1-1/2" 1" 140 9
2· 1.1 /2" 140 9
3• 2'' 140 9
NOTE 4• 2" 160 16
1. MATERIAL 6" 4" 160 16
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA T'L TABLE. 8" 4" 160 16
- OTHERS : A36 OR EQ. 10" 6" 210 16
CODE RUN PIPE SUPPORT PIPE 12" 8" 260 20
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 14" 8" 320 20
y A335 P11 A335 P11 OR EQ. 16" 10· 320 20
w A335 P22 A335 P22 OR EQ.
18" 10" 350 20
X A312 TP304, TP316 A312 TP304 OR EQ.
20" 12· 350 20
z A312 TP321 A312 TP321 OR EQ.
24" 12· 460 20
2. SEE DWG. NO. ST-A4-0004H FOR APPLICATION OF TRUNNION ALLOWABLE LOAD.
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
PIPE MAT'L
SUPP'T SERIAL NO.
~--ELEV. "F" HDS31E-009
PLAN DWG. NO. ----~ HDS31E-009
~---- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
PIPING SUPPORT STANDARD DWG. ST-A4-1160H(2/2)

3-WAY STOP HDS-32 REV.
1RUNNION TYPE ON SlRUCTURE)
PIPE SIZE "p"

"a" EQUALS THE
TRUNNION WALL TH'K
PIPE SIZE "p"
5~ VENT
HOLE
ELEV. T
L_____ EXISTING STEEL
TYPE-E TYPE-T
NO CLEARANCE A
•1~1!(A~~NGTH SOmm:
d]~ir==t30
TYP ~ ~[F:-}QL
BASE PLATE
UNIT (mm)
NPS "p" PIPE A \1
1-1/2" 1· 140 9
2" 1.1/2" 140 9
3• 2" 140 9
NOTE 4• 2" 160 16
1. MATERIAL 6" 4• 160 16
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA n TABLE. 8" 4" 160 16
- OTHERS : A36 OR EQ. 10" 6" 210 16
CODE RUN PIPE SUPPORT PIPE 12" 8" 260 20
K API 5L GR.B, A106 GR.8 API 5L GR.8 OR EQ. 14" 8" 320 20
y A335 P11 A335 P11 OR EQ. 16" 10· 320 20
w A335 P22 A335 P22 OR EQ.
18" 10· 350 20
X A312 TP304, TP316 A312 TP 304 OR EQ.
20· 12" 350 20
z A312 TP321 A312 TP321 OR EQ.
24" 12" 460 20
2. SEE DWG. NO. ST-A4-0004H FOR APPLICATION OF TRUNNION ALLOWA8LE LOAD.
SYMBOL & CODING
P/S SID. NO.

SU8-TYPE PIPE MArL
SLJpp'T SERIAL NO. ' - - - - ELEV. "F"

PLAN DWG. NO. ----~ HDS32E-009
HDS32E-009
~---- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1161 GUIDE GF-31
PIPE SIZE "p"

a TRUNNI~ WALL TH'K a
TYP.
- - - - - - ELBV.
--- "I•
'O
o
N
4-EXPANSION :r: x
ANOiOO BOLTS •J" <(
2-
BASE PLATE
GROUTING
TYP. 6
ELBV. "r ELBV. "r 4-d91
TYPB-F
(ON FOUNOA TION) TYPB-P
(ON PA\/lNG)
"a"EQUALS THE
a TRUNNION WALL TH'K a
PIPE SIZE "p"
--~·_"l. _ _ _gin._ "l.

3o, J ~oJ. A J3aJ J .3o
UNIT (mm)
'O 'O
o NPS 'p' PIPE
o A t1 t2 d~
N
N
:r:,.¿
1-1/2" 1" 140 6 6 13.5
<( 2· 1.1 2· 140 6 6 13.5
2- 3• 2" 140 6 6 13.5
4• 2· 140 6 6 13.5
BASE PLATE 6" 4" 160 9 9 13.5
GROUTING
8" 4" 160 9 9 13.5
ELBV. "r ELBV. 10· 6" 210 12 12 17.5
12" 8" 260 12 12 17.5
14" 8" 260 12 12 17.5
16" 10· 320 16 16 17.5
TYPB-S 18" 10· 320 16 16 17.5
NOTE ( ON FOUNDA TION)
TYPB-T 20· 12" 350 16 16 17.5
1. MATERIAL (ON PA\/lNG) 24" 12" 350 16 16 17.5
y A335 P11 A335 P11 OR EQ.
2. SEE OWG. NO. ST-M-1032
w A335 P22 A335 P22 OR EQ.
FOR THE DETAil OF EXPANSION
X A312 TP304, TP316 A312 TP 304 OR EQ. ANCHOR BOLT(BPLR) OF TYPE-P & T.
z A312 TP321 A312 TP321 OR EQ.
L A333 GR.6 A333 GR.6 OR EQ. 3. SEE OWG. NO. ST-M-0004
FOR APPLICA TION OF REINFORCING PAD
N A333 GR.3 A333 GR.3 OR EQ. ANO TRUNNION ALLOWABLE LOAOS.
o ASTM B444 GR.1 ASTM B444 GR.1 OR EQ.
SYMBOL & CODING
P/S STO. NO.

SUB- TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO.
PIPE SIZE "p"
REINF.PAD
(IF REQ'D)
TRUNNINON
MAT'L
ELEV. "F"
ELEV. "E"
¡;: V PLAN
1 GF3>009 I
ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1161H GUIDE HGF -31
TRUNNION TYPE ON FID)

oo
00
tmo=i:f~
11
x
<
1 1
ó
~
EXISTING INSERT
PLATE ILIV. .,- 4" & SMALLER
nPl-F
(ON FOUNDATION)
"a"EQUALS THE
PIPE SIZE "p"
- - -"E"
- -ILIV. -
6" TO 24"
oo
00
x
<
ó
EXISTING INSERT
PLATE
ILIV. .,-
UNIT (mm)
NPS "p" PIPE A t1
nPl!-S 1-1/2" 1" 140 9
( ON FOUNDA TION)
2" 1.1/2" 140 9
3" 2" 140 9
NOTE 4" 2" 160 16
1. MATERIAL 6" 4" 160 16
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MAT'L TABLE. 8" 4" 160 16
- OTHERS : A36 OR EQ. 10" 6" 210 16
CODE RUN PIPE SUPPORT PIPE 12· 8" 260 20
y A335 Pll A335 P11 OR EQ. 16" 10" 320 20
w A335 P22 A335 P22 OR EQ.
18" 10" 350 20
X A312 TP304, TP316 A312 TP304 OR EQ.
20" 12" 350 20
z A312 TP321 A312 TP321 OR EQ.
24" 12" 460 20
2. SEE DWG. NO. ST-A4-0004H FOR APPLICA TION OF TRUNNION ALLOWABLE LOAD.
SYMBOL & CODING

HGF31F-009-13001-16" -E18500-F17500-K
P/S STO. NO.

SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
~-- ELEV. "F"
PLAN DWG. NO. HGF31F-009
HGF31F-009
PLAN ISO
GUIDE GF-32 REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1162 (TRUNNION TYPE FOR ALLOY AND
HEA T TREA TED PIPE AO
PIPE SIZE •p•
PIPE SIZE •p• • a"EaUALS THE
TRUNNON WAl.l TH'K a
TYP.
ILIV. "I• TRUNNION ·a1"

COLUMN ·a2·
COLUMN "a2"
oo
N
::r:,,.¿ TYP. 6
<(
BASE PLATE 2- 4-d9l

GROUTING
ILIV. T ILIV. T
TYPE-F
(ON FOUNDATION) TYPE-P
(ON PAVlNG)
Q:'. 30 1~al . A .
.
PIPE SIZE "p" o
o_ f-
o<C UNIT (mm)
:r: S2
(l)D:'. PIPE SIZE NPS BASE PLATE
<D ~ NPS "p' ·01",'02·
>- <( t:, A t1 t2 d9l J
<D u..
1-1/2" 1· 140 6 6 13.5 3/8'
TRUNNION ·a1" TRUNNION "01 • 2" 1.112· 140 6 6 13.5 3/8'
COLUMN ·a2·
Q:'.
o 3• 2'' 140 6 6 13.5 3/8'
Cl f-
o .....J <( 4• 2" 140 6 6 13.5 3/8
o wS2
COLUMN "a2·
x
-x
N
G:D:'. o.:
<D
>- <( >-
~
6" 4" 160 9 9 13.5 3/8
<(
<( <D u.. t:, 8" 4" 160 9 9 13.5 3/8
:;:¡;; 2- 10· 6" 210 12 12 17.5 1/2"
~ 4-EXPANSION
ANCHOR BOL TS •J" 12· 8" 260 12 12 17.5 1/2"
BASE PLATE 14" 8" 260 12 12 17.5 1/2"
GROUTING
16" 10· 320 16 16 17.5 5/8
ILIV. T ILIV. T 18" 10" 16 17.5 5/8'
320 16
20" 12" 350 16 16 17.5 5/8'
24" 12" 350 16 16 17.5 5/8
TYPE-S
NOTE (ON FOUNDATION) TYPE-T
1. MATERIAL (ON PAVlNG) 2. SEE DWG. NO. ST-M-1032
- PLATE : A36 OR Ea.
- TRUNNION ·a1· : SAME AS RUN PIPE OR MAT'L TABLE. FOR THE DETAil OF EXPANSION
ANCHOR BOLT(BPLR) OF TYPE-P & T.
CODE RUN PIPE TRUNNION ·ar·
- ANGLE : A36 OR Ea.
K API 5L GR.B, A106 GR.B API 5L GR.B OR Ea. 3. SEE DWG. NO. ST-M-0004
y A335 P11 A335 P11 OR EQ. - COLUMN ·ar : API 5L OR EQ. FOR APPLICA TION OF REINFORCING PAD
w A335 P22 A335 P22 OR Ea. AND TRUNNION ALLOWABLE LOADS.
X A312 TP304, TP316 A312 TP 304 OR Ea.
4. IF APPLICABLE ALL TRUNNIONS ON
z A312 TP321 A312 TP321 OR EQ. SHOP FABRICA TED PIPE CAN BE
o ASTM B444 GR.1 ASTM B444 GR.1 OR Ea. INSTALLED BY THE SHOP.
SYMBOL & CODING
P/S STD. NO. REINF.PAD

(IF REQ'D)
SUB-TYPE
TRUNNINON
SUPP'T SERIAL NO.
MAT'L
PLAN DWG. NO. ---ELEV. "F"
( JA0-13001)
PIPE SIZE "p" ' - - - - - - - - - ELEV. "E"
PLAN ISO
REV.
GUIDE GF-33
(ADJUSTABLE, TRUNNION TYPE ON F/D) AQ
PIPE SIZE "p"

a lRUNNION WAll TH'K a
11.BV. "l. ILIV. "I•

----- ------
oo
N
ILIV. ·r
TYPl-F
(ON FOUNDATION) TYPE-P
(ON PAVlNG)
PIPE SIZE "p"
_ _ _Jg.IV._ "l.
UNIT (mm)
NPS 'p' "Q1","Q2' A t d(ll J
1-1/2" 1· 140 6 11 3/8"
oo 2" 1.1 /2" 140 6 11 3/8"
N
3" 2" 140 6 11 3/8"
59l VlENT HOLE
4• 2" 140 6 11 3/8'
59l VlENT HOLE 6' 4• 160 9 11 3/8"
8" 4' 160 9 11 3/8"
10· 6" 210 12 13 1/2"
12· 8" 260 12 13 1/2"
11.BV. .,. 14" 8" 260 12 13 1/2"
16" 10" 320 16 17.5 5/8"
18" 10" 320 16 17.5 5/8"
20' 12" 350 16 17.5 5/8"
TYPl-S 24" 16 17.5 5/8"
12" 350
NOTE (ON FOUNDATION)
1. MATERIAL TYPl-T
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MAT'L TABLE. (ON PAVlNG)
CODE RUN PIPE TRUNNION "Q1"
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 2. SEE DWG. NO. ST-M-1032(2/2) & 1033
Y A335 P11 A335 P11 OR EQ. FOR THE DETAil OF EXPANSION
W A335 P22 A335 P22 OR EQ. ANCHOR BOL T(BPLR & BPLS)
X A312 TP304, TP316 A312 TP304 OR EQ. 3. SEE DWG. NO. ST-M-0004
Z A312 TP321 A312 TP321 OR EQ. FOR APPLICA TION OF REINFORCING PAD
L A333 GR.6 A333 GR.6 OR EQ. ANO TRUNNION ALLOWABLE LOADS.
O ASTIJ 8444 GR.1 ASTM 8444 GR.1 OR EQ.
SYMBOL & CODING

(IF REQ'O)
SUB- TYPE TRUNNINON
SLJpp'T SERIAL NO. MAT'L
PLAN DWG. NO. ~--ELEV. "F"
PIPE SIZE "p" ' - - - - - - - ELEV. "E"

PLAN ISO
·-----. -- ---------·~------------- -------- -----

GUIDE GF -34 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1164 (ADJUSTABLE, TRUNNION TYPE ON F/O AO
FOR ALLOY & SS PIPE)
PIPE SIZE "p"

PIPE SIZE •p• •a"EOUALS THE
lRUNNIOO WALL TH1< a
TRUNNION "01 • TRUNNION ·01·
COLUMN "02"
l!Ifi. .,. l!Ifi. .,.
TYPl!-F
(ON FOUNDATION) TYPl!-P
(ON PAVING)
~oj l 30
PIPE SIZE "p"
A
TRUNNION "01 • TRUNNION "01 • ---~·-"!!"
UNIT (mm)
NPS "p" ·01·:02· A t di& J
COLUMN "Q2" COLUMN "02"
1-1/2" 1· 140 6 11 3/8"
oo 2" 1.112· 140 6 11 3/8"
N
3" 2· 140 6 11 3/8"
50 VENT HOLE
4" 2" 140 6 11 3/8"
50 VENT HOLE 6" 4• 160 9 11 3/8"
8" 4• 160 9 11 3/8"
10· 6" 210 12 13 1/2"
12" 8" 260 12 13 1/2"
l!Ifi. .,. 14" 8" 260 12 13 1/2"
16" 10· 320 16 17.5 5/8"
18" 10· 320 16 17.5 5/8"
20" 12" 350 16 17.5 5/8"
TYPB-S 24" 12" 350 16 17.5 5/8"
NOTE (ON FOUNDA TION)
1. MATERIAL TYPl!-T
- PLA TE : A36 OR EO. (ON PAVING)
- TRUNNION "01" : SAME AS RUN PIPE OR MA T'L TABLE.
K API 5L GR.8, A106 GR.B API 5L GR.B OR EQ. - ANGLE : A36 OR EQ. 2. SEE DWG. NO. ST-A4-1032(2/2) & 1033
y A335 P11 A335 P11 OR EO. FOR THE DETAil OF EXPANSION
- COLUMN "02" : API 5L OR EO.
w A335 P22 A335 P22 OR EO. ANCHOR BOL T(BPLR & BPLS)
X A312 TP304, TP316 A312 TP304 OR EQ.
z A312 TP321 A312 TP321 OR EO. FOR APPLICA TION OF REINFORCING PAD
o ASTM B444 GR.1 ASTM B444 GR.1 OR EO. AND TRUNNION ALLOWABLE LOADS.
SYMBOL & CODING

(IF REO'D)
SUB-TYPE TRUNNINON
PLAN DWG. NO. ' - - - - ELEV. "F"
PIPE SIZE "p" ' - - - - - - - ELEV. "E"
PLAN ISO
-- ---- ------·-------------·---------·----- -----·--------------------------- --·---- --- .

GUIDE GF-41 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1165 (FOR COLO IN SULA TED PIPE;
TRUNNION TYPE ON Fjo) AO
"a"EOUALS THE
TRUNNION WALL TH'K
PIPE SIZE "p"
"a"EQUALS THE
ILIV "E"
S' TRUNNION "01" S'

Cl
Cl
N N
URETHANE BLOCK
(URB)
ILIV "1" ILIV "1"
EXISllNG INSERT PLA1E

TYPE-F TYPE-S
(ON FOUNDAllON) (ON FOUNDAllON)
"a"EOUALS THE
TRUNNION WALL TH'K
PIPE SIZE '"p"
"a"EQUALS THE
ILIV "E" ILIV "E"
TRUNNION "01"
S' TRUNNION "01" S'
Cl
Cl
N N
URETHANE BLOCK
(URB)
ILIV "1" ILIV "F"
10(TYP.)
TYPl-P
11 TYPE-T
(ON PAV1NG) (ON PAV1NG)
NOTE

FOR APPLICA llON OF REINFORCING PAD
ANO TRUNNION ALLOWABLE LOADS. UNIT (mm
2. MATERIAL PIPE SIZE NPS U.BLOCK PIPE SIZE NPS U.BLOCK

NPS "p" ·01· H1 NPS "p" '01" H1
- TRUNNION : SAME AS RUN PIPE OR MA Tl TABLE.
1-1 /2" 1" 104 14" 8" 117
CODE RUN PIPE TRUNNION BASE PLlTI 2" 1-1/2" 104 16" 10" 117
K API 5L GR.B, A106 GR. API 5L GR.B OR EQ.
3" 2" 104 18" 10" 117
L A333 GR.1 00 6 A333 GR.6 OR EQ.
4" 2" 104 20· 12" 117
X A312 TP304, TP316 A312 TP304 OR EQ. 6" 4• 111 24" 12" 117
N A333 GR.3 A333 GR.3 OR EQ.
8" 4• 111 26" ~28" 14" 117
3. SEE DWG. NO. ST-A4-1020 10" 6" 114 30" 16" 124
FOR THE DETAil OF URETHANE BLOCK ASSEMBLY(URB). 12· 8" 117 36" 18" 133
SYMBOL & CODING

(IF REO'D)
SUB- TYPE
PIPE MATl
SUPP'T SERIAL NO.
~--ELEV. "F"
PLAN OWG. NO. ----~
~----- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
-~- --- --- ---- ---------------- ----------------- -----------------------·----------~------------·---------

GUIOE GF-43 REV.
ADJUST ABLE, TRUNNION TYPE ON F AO
PIPE SIZE "p" "a"EOUALS THE

TRUNNION WALL TH'K a·EOUALS THE
PIPE SIZE "p"
TRUNNION WALL TH'K
EID. "E• !ID. "E.
o
C>
N
TYPE-F TYPE-S
(ON FOUNDATION) (ON FOUNDATION)
PIPE SIZE •p•
"a"EQUALS THE
EID. T EID. "E•
o o
C>
C> N
N
EID. .,. EID. .,.
10(TYP.) UNIT (mm)

TYPE-P
(ON PA\11NG)
11 PIPE SIZE TRUNNION COLUMN U.BLOCK
NPS •p" NPS ·or
NPS "02" H1
NOTE H/2" r 1· 104
2" 1.1 2· 1.1 2" 104
FOR APPLICATION OF REINFORCING PAD y 2" 2" 1~
AND TRUNNION ALLOWABLE LOADS. 4" 2" 2" 104

2. MATERIAL 6" 4" 4" 111
- TRUNNION : SAME AS RUN PIPE OR MA T'L TABLE. 8" 4" 4" 111
- COLUMN •02• : API 5L Gr.B OR EO. 10" 6" 6" 114
- PLA TE : A36 OR EO. BASE PU.TE
12" 8" 8" 117
CODE RUN PIPE TRUNNION 8" 117
3. SEE DWG. NO. ST-A4-1032 & 1033 FOR THE DETAil ANO
K API 5L GR.B, A106 GR. API 5L GR.B OR EQ. 16" 10" 10"
ALLOWABLE LOADS OF EXPANSION ANCHOR BOLT ANO 117
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
BASE PLA TE(BPLR & BPLS) 18" 10" 10" 117
X A312 TP304, TP316 A312 TP304 OR EO.
A333 GR.3 OR EO. 4. SEE DWG. NO. ST-M-1023 (4/4) 20" 12" 12" 117
N A333 GR.3
FOR THE DETAil OF ADJUSTABLE STANCHION(ADS). 24" 12" 12" 117
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
' - - - - ELEV. "F"
PLAN DWG. NO. - - - - - - - - '
~----- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
REY.
GUIDE GS-1
NOTE
1. MATERIAL
- PAD & PARTS DIRECTL Y WELDED
TO PIPE : SAME AS RUN PIPE OR
MAT'L TABLE.
PARTS DIRECTL Y
3mm CLEARANCE CODE RUN PIPE WELDED TO PIPE
(TYP.) K API SL GR.8, A106 GR.B A283 GR.C OR EQ.
3" & SMALLER
y A335 P11 A387 GR.11 OR EQ.
W A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
Z A312 TP321 A240-321 OR EQ.
2. SHOE HEIGHT "H"

H INS. TH'K CODE
100 UP TO 75 b
~
150 76 TO 125 e
200 126 TO 175 d
250 176 & OVER e
3mm CLEARANCE 3. SEE DWG. NO. ST-A4-1101

60
(TYP.)
4" TO 8"
300
(450)
.I FOR THE DETAil OF SHOES.
4. REINF. PADS ARE REQUIRED FOR 1o· & LARGER
w SEE NOTE 6 STAINLESS STEEL PIPE.
5. FOR UNES 20" THRU 24" SIZE CARBOON STEEL
PIPE SIZE "p"
PIPE ANO THOSE WITH WALL THICKNESS
INS. TBK LESS THAN STANDARD WEIGHT SHALL BE
CHECKED TO DETERMINE THE NEED
MEMBER FOR REINFORCING PADS.
"M"
6. 'M-IEN PIPE LONGITUDINAL EXPANSION EXCEEDS
1OOmm, A LONGER SHOE WILL BE USED ANO
DESIGNA TED BY ADDING AN "L" TO THE END OF
SYMBOL.
3mm CLEARANCE UNIT (mm)
(TYP.) ALLOWABLE LOADS (Kg)
PIPE MEMBER H=100 H=150
10" TO 24" SIZE "M"
''Wmax Pmax 'Wmax Pmax
2· N2-112• A5 325 100 300 90
3• A5 500 150 400 120
4"N8" A6 900 200 875 150
10"N24" A7 2700 1700 1000 830
26"N40" A7 8650 1700 7950 1700
MEMBER ALLOWABLE LOADS (Kg)

"M" SIZE "M"
''Wmax Pmax 'Wmax Pmax
2·N2-1 /2" A5 - - - -
3• A5 - - - -
3mm CLEARANCE
4"N8" A6 - - - -
1o·N24• A7 - - - -
(TYP.)
26"N40" A7 7400 1700 6900 1700
26" & LARGER
SYMBOL & CODING
~
1 GS1L-Ll.001-lf-b-1$. I 1
) )
P/S SID. NO.
LONGER SHOE
PLAN DWG. NO.

1 1 PIPE MAT'L
SHOE HEIGHT
CODE
PIPE SI ZE "p"
1 i_, 1
~
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1171H GUIDE HGS-1
FOR HOT INSULA TED PIPE; SHOE TYPE) AO
.11 3mm CL ARANCE

(TYP.)
.I
4" & SMALLER
MEMBER
~
3mm CLEARANCE
(TYP.)
6" TO 24"
UNIT (mm)
PIPE MEMBER
SIZE "M"
3/4"N4• C10
6"N24" A5
NOTE
1. MATERIAL 2. SHOE HEIGHT "H"
- PAD : SAME AS RUN PIPE OR MAT'L TABLE H INS. TH'K CODE
- OTHERS : A36 OR EQ. 100 UP TO 75 b
150 76 TO 125 e
CODE RUN PIPE PAD 126 TO 175
200 d
K API 5L GR.8, A106 GR.B A283 GR.C OR EQ. 250 176 & 01/ER e
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ. 3. SEE DWG. NO. ST-A4-1101H
X A240-304 OR EQ. FOR THE DETAIL OF SHOES.
A312 TP304, TP316
z A312 TP321 A240-321 OR EQ. 4. \IMEN PIPE LONGITUDINAL EXPANSION EXCEEDS
100mm, A LONGER SHOE \li1LL BE USED AND
DESIGNA TED BY ADDING AN "L" TO THE END OF
SYMBOL.
SYMBOL & CODING
( (
J )
P/S SID. NO. PIPE MAT'L
LONGER SHOE SHOE HEIGHT

CODE 1HGS¿_K1
PLAN DWG. NO. PI PE SIZE "p"
PLAN ISO
--~ ~----- - - - - - · - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -------

REV.
GUIDE GS-3
(FOR BARE & SLOP PIPE; SHOE TYPE) AO
PIPE SIZE "p"
NOTE
1. MATERIAL
- PAD & PARTS DIRECTL Y WELDED
TO PIPE : SAME AS RUN PIPE OR
MAT'L TABLE.
PARTS DIRECTL Y
3mm CLEARANCE CODE RUN PIPE WELDED TO PIPE
(TYP.) API 5L GR.B, A106 GR.B A283 GR.C OR EQ.
3" & SMALLER K
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
PIPE SIZE "p"
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
A333 GR.6 A516 GR.60 OR EQ.
N A333 GR.3 A203 GR.D EQ.
--- rt4
.11. 3mm CLEARANCE
MEMBER
"M"
FOR lHE DETAil OF SHOES.
3. REINF. PADS ARE REQUIRED FOR 10· & LARGER
60
(TYP.)
4" TO 8"
300
(450)
.I STAINLESS STEEL PIPE.
4. FOR UNES 20" lHRU 24" SIZE CARBOON STEEL
PIPE ANO lHOSE 'MlH WALL lHICKNESS
w SEE NOTE 6
LESS lHAN STANDARD WEIGHT SHALL BE
CHECKED TO DETERMINE lHE NEED
PIPE SIZE •p•
FOR REINFORCING PADS.
5. WHEN PIPE LONGITUDINAL EXPANSION EXCEEDS
100mm, A LONGER SHOE 'MLL BE USED ANO
MEMBER DESIGNA TED BY ADDING AN "L" TO lHE END OF
SYMBOL.
MEMBER
"M"
3mm CLEARANCE SHOE UNIT (mm)

(TYP.) ALLOWABLE LOADS (Kq]
10" TO 24" 11!3mm lHR'D SIZE "M"
'Wmox Pmox 1 ·wmax Pmox
VENT HOLE
2"N2-1 Jt AS 32S 100 300 90
3" AS soo 150 400 120
PIPE SIZE "p" 4"N8' A6 900 200 87S 1SO
1o"N24" A7 2700 1700 1000 830
26"N40" A7 86SO 1700 79SO 1700
ALLOWABLE LOADS (Kq)
MEMBER PIPE MEMBER
"M" H=200 H=2SO
SIZE "M"
''Wmox Pmox ''Wmox Pmox
MEMBER 2"N2-112" AS - - - -
-
1 JL IL.._
3" AS - - -
4"N8' A6 - - - -
3mm CLEARANCE
1o•N24" A7 - - - -
~
(TYP.)
26"N40• A7 7400 1700 6900 1700
26" & LARGER E
(E+350)
SEE NOTE 6
SYMBOL & CODING
~
(
) )
PIPE MAT'L
P/S STD. NO.
SHOE HEIGHT
1 GSJ-¿00-K lcsj,oo-K 1
PLAN DWG. NO. PIPE SI ZE •p•

PLAN ISO
-- - ---------·~---------- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - · - --------------
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1174 GUIDE GS-4
(FOR COLO INSULA TED PIPE) AO
24" ANO SMALLER
26" ANO LARGER
CRADLE; SEE DEG. NO. ST-A4-1104

ANGLE CRADLE
PIPE SIZE REMARKS TH'K CODE IN SULA TION TH'K
(FOR GUIDE)
1" ~ 6" A50 X 50 X 6 a=50 25 ~ 50
8" ~ 12" A75 X 75 X 9 b=100 51 ~ 100
14" ~ 24" A90 X 90 X c=150 101 ~ 150
26" ~ 32" A100 X 100 d=200 151 ~ 200
34" ~ 42" A100 X 100 e=250 201 ~ 250
44" ~ 60" A100 X 100 f=300 251 ~ 300
SYMBOL & COOING
~
( (
) )
~ ~
P/S STO. NO. CRADLE TH'K
CODE
PIPE SIZE "p"

PLAN ISO
---------------·--------------------- ----------·----------
REV.
(FOR HEA T TREA TED PIPE; SHOE TYPE) AO
3mm CLEARANCE
(TYP.)
3" & SMALLER
PIPE SIZE "p"
~~-:-~
.11. 3mm CLEARANCE
60 (TYP.)
4" TO 8"
INS. TBX
3mm CLEARANCE
(TYP.)
10" TO 24" UNIT (mm)
ALLOWABLE LOADS K
NOTE PIPE MEMBER
SIZE H=100 H=1SO
1. MATERIAL "M"
Wmax Pmax Wmax Pmax
- CLAMP, BOLT/NUT 3. SEE DWG. NO. ST-A4-110S 1 N2-1 2 AS 32S 100 300 90
FOR TI-IE DETAil OF SHOES.
3 AS sao 1SO 400 120
CODE TEMP. CLAMP BOLT & NUT 4"N8" A6 900 200 87S 150
4. WHEN PIPE LONGITUDINAL EXPANSION 10 N24 A7 2700 1700 1000 830
K N3SO" A283 GR.B OR EQ. A307 GR.B GALV. 26 N40 A7 86SO 1700 79SO 1700
EXCEEDS100mm, A LONGER SHOE WILL
L N4SO" AS16 GR.B OR EQ. A193 87 /A194 2H BE USED ANO DESIGNA TED BY ADDING ALLOWABLE LOADS K
y N640" A387 GR.11 OR EQ A193 87 /A194 2H AN "L" TO TI-IE END OF SYMBOL. PIPE MEMBER H=200 H=250
SIZE "M"
Wmax Pmax Wmax Pmax
2. SHOE HEIGHT "H" 2·N2-1 2" AS
H INS. TH K CODE 3 AS
100 UP TO 7S b 4 N8 A6
1SO 76 TO 125 10 N24 A7
200 126 TO 17S 26"N40" A7 7400 1700 6900 1700
2SO 176 & OVER
SYMBOL & CODING
PIPE MArL
P/S STO. NO.
SHOE HEIGHT
PLAN DWG. NO.
PIPE SIZE "p"
PLAN ISO
-¡
1
1
!

REV.
GUIDE GS-6
(FOR BARE PIPE) AO
3mm CLEARANCE
TYPE-A TYPl-D
4" & SMALLER 26" "'32"
PIPE SIZE "p"
PIPE SIZE "p"
5" & 24"
UNIT (mm)
PIPE SIZE ALLOW. LOAD PIPE SIZE ALLOW. LOAD
MEMBER H MEMBER H p (Kg)
NPS "p" P (Kg) NPS "p"
1/2" A3 50 310 10· 2 * A7 260 11SO
3/4" A3 50 310 12· 2 * A7 260 950
1· A3 50 310 14" 2 * A7 260 900
1-1/2" A3 50 310 16" 2 * A7 260 750
2" A5 50 1050 18" 2 * A7 260 700
2-1/2" AS 7S 10SO 20· 2 * A10 3SO 1100
3• AS 7S 1050 24" 2 * A10 350 900
4• AS 75 1000 26" 2 * C15 380 1200
5" 2 * A5 130 1000 28" 2 * C15 400 1200
6" 2 * A5 130 800 30" 2 * C15 430 1200
8" 2 * A5 130 650 32" 2 * C15 450 1200
NOTE
1. MATERIAL
SYMBOL & CODING
~
(
) )
P/S SID. NO.
SUB-TYPE
PIPE SIZE "p"
PLAN DWG. NO. ck PLAN

~ ISO
REV.
GUIDE HGS-6
FOR BARE PIPE)
PIPE SIZE 'p"

3mm CLEARANCE
1
TYPl-A
3" & SMALLER
3mm CLEARANCE PIPE SIZE "p"
TYPE-B
4" & 24"
UNIT (mm)
PIPE SIZE PIPE SIZE
MEMBER H MEMBER H
NPS 'p" NPS "p"
1-1/2" 2 * A5 100 10· 2 * C10 230
2" 2 * A5 100 12· 2 * C10 230
2-1/2' 2 * A5 120 14" 2 * C10 250
3• 2 * A5 120 16" 2 * C10 280
4" 2 * C10 140 18" 2 * C10 300
5• 2 * C10 140 20· 2 * C10 330
6' 2 * C10 150 22· 2 * C10 350
8" 2 * C10 150 24" 2 * C10 380
NOTE
1. MATERIAL
SYMBOL & CODING
~
(
) )
P/S SID. NO.
SUB-TYPE
PIPE SIZE "p"
PLAN DWG. NO.

o(~
PLAN
~ ISO

GUIDE GS-8 REV.
(FOR 4" & SMALLER BARE PIPE;
U-BOLT TYPE AO

w
U BOLT 3mm CLEARANCE 3mm CLEARANCE
(UBT)
U-BOLT U-BOLT
(UBT) (UBT)
"""'"""''4.-'l~p
BOL T HOLE "h0"
DRILL ON EXISTING
BEAM
' '. ' =1 , BOLT HOLE "h0"
e e
"L" SIZE
Bf--t---e-+=3
B
I. e . I
EXISTING STRUCTIURE
TYPl-A TYPl-B TYPl-C
UNIT (mm)
PIPE SIZE ALLOW. LOAD (Kg)
NPS "p"
B e h0 "L" SIZE A X T X L X
Wmax Pmax
1/2" 90 36 11 A5 FB - 50x6x90 2 240 140
NOTE
3/4" 90 40 11 A5 50x6x90 2 240 140
1. MATERIAL 1· 90 45 11 A5 50x6x90 2 240 140
- SHAPE STEEL : A36 OR EQ. 1-1/2" 120 60 11 A5 50x6x120 2 550 330
CODE RUN PIPE U-BOLT 2· 120 75 11 A5 50x6x120 2 550 330
K APl-5L GR.B, A106 GR.B A307 GR.B 2-1/2" 150 90 14 A5 50x6x150 2 1030 580
y A335 P11 A193-87/A194-2H 3" 180 105 14 A5 50x6x180 2 1030 580
w A335 P22 A193-B7 /A194-2H 4" 200 135 18 A5 65x9x200 3 1640 900
X A312 TP304, TP316 A320-88/A194-8
z A312 TP321 A320-88/A194-8
2. SEE DWG. NO. ST-M-1001 FOR

THE DETAIL OF U-BOLT.
SYMBOL & CODING
~
( (
) )
ofu ~
PIPE MATERIAL
P/S SID. NO.
PIPE SIZE "p"
SUB-TYPE
PLAN DWG. NO.
PLAN ISO
REV.
(FOR BARE RISER PIPE) AO
ll_ ________ J'I

' ' '
i i r+i ¡ '
:1 ~---w-----1
1 1
'
,j~EXIST
§j~ ! é~fftl-
BEAM
'
11V1
: _ffi_ :
¡-- Ll.J --1
'' ''
: 1 :
~
1
hJ u--------0
3mm CLEARANCE (TYP.)

IIEV. -g• IIEV. •g•
TYPE "A" TYPE "B"
NOTE
1. MATERIAL
SYMBOL & CODING
P/S SID. NO. PLAN DWG. NO.

-f- ~L~/~ ~/l
SUB TYPE PIPE SIZE "p'
l lA-oog I ,,- GS11A-009
SUPP'T SERIAL NO. PIPE SI ZE "p"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-M-1180 GUIDE GS-12
ll_ ________ _J¡

n
o~ ! El r
r
!
11
!
r
r
~i~~J
: ¡ ¡
C-Effi~E! ~
1 1
rh ¡
~--·---l 1
r
r
I
r
EXIST
BEAM
0R:f=t¡H-- 1
1 1
fG3-
1
¡
1
~~ ¡ ¡\]Y¡ r
i
r
i ¡ i
r
r
i : _ffi_
¡-- Ll.J --1
:
1
r 1 1 1 1 1
~ ~ 0---------LJ
ELEV. "E"
ILEV. "E"
3mm CLEARANCE TYP.

TYPE "A" TYPE "B"
1. MATERIAL
SYMBOL & CODING
P/S STO. NO.
SUB TYPE
SUPP'T SERIAL NO.

PLAN DWG. NO.
PIPE SIZE "p"
PIPE SIZE •p•
•
1LA-0091
PLAN
~¿/~
,,
~/f
GS12A-009
ISO
GUIDE GS-21 REV.
(FOR BARE RISER PIPE; U-BOL T TYPE) AO
f'.::':'.!~~
t~: MIN
_ A_ _
(MAX. 1000)
l lJ
PLAN
TYPI-! TYPl-B
PIPE SIZE "p"
MEMBER "M"
EXISTING
BEAM
ILIV. "I•
SECTION
1. MATERIAL UNIT (mm)

CODE RUN PIPE U-BOLT AS SOO SOO< As 1000
K APl-SL GR.B, A106 GR.B A307 GR.B PIPE SIZE ALLOW. LOAD ALLOW. LOAD
NPS "p" h~ MEMBER (Kg) MEMBER (Kg)
y A335 P11 A193-87 /A194-2H "M" "M"
Pmax Fmax Pmax Fmax
w A335 P22 A193-87 /A194-2H
X A312 TP304, TP316 A320-88/A194-8 3/4" 11 AS 80 140 A7 60 140
z A312 TP321 A320-88/A194-8 1" 11 A5 80 140 A7 60 140
1-1/2" 11 AS 80 330 A7 60 330
2. SEE DWG. NO. ST-M-1001/1178
FOR THE DETAil OF U-BOLT. 2" 11 A6 1SO 330 A10 140 330
3" 14 A7 280 S80 C12 340 S80
3. SEE DWG. NO. ST-A4-1031 FOR THE DETAil OF
EXPANSION ANCHOR BOL T(BPLA). 4" 18 A10 S60 900 C12 340 900
4. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL
SYMBOL & CODING
:C----) ~~ 1~ /'
~!,-/
G~oool
PIPE MATERIAL
¡os~OIJ9
P/S sm. NO.
SUB-TYPE ELEV. "E"
SUPP'T SERIAL NO.
DIM "A" I 1
PLAN DWG. NO.
PIPE SIZE "p"
PLAN ISO
GUIDE GS-22 REY.
LLJ
u
z
<(
<>::
<(
PIPE SIZE "p"
LLJ
6 _J
u
E
E
,.,.., MEMBER "M"
EXISTING A7
u BEAM
~-- ---------
t""'=+--~~-"'--'-"----..,.~"""--L-1 6 45'
1100
MIN
1
A
(MAX. 1200)
6" TO 8"
PLAN SECTION
UNIT (mm)
PIPE SIZE A < 500 500 < A~ 1000 1000 < A ~ 1200
NPS e MEMBER * ALLOW. LOAD (Kg) MEMBER * ALLOW. LOAD (Kg) MEMBER * ALLOW. LOAD (Kg)
"p" SIZE "M" Fmax Pmax SIZE "M" Fmax Pmax SIZE "M" Fmax Pmax
6" 87 C10 2200 900 C12 2300 540 C12 1900 300
8" 113 C12 3300 1800 C15 3800 1000 C15 3200 600
1. MATERIAL
SYMBOL & CODING
P/S sm. NO. ELEV. "E"

SLJpp'T SERIAL NO. DIM "A"
PLAN DWG. NO. - - - - - - - "

PIPE SIZE "p"
PLAN ISO
--------------·- -
REY.
(FOR BARE RISER MUL TI-PIPE) AO
100 !
(MAX. 1000)
,_,_~A~/2~___,
1
: 1
!. U-BOLT
(UBT)
EQUIVALENT
PIPE SIZE "Pe"
Pe= jp,' +P/ + --
• _J
X
<(
::::;
Cl ~
PLAN 6 p
EXISTING
BEAM
ILIV. "I"
"[" SIZE
SECTION
Pe=12" & SMALLER
UNIT (mm)
EQUIV. A s 500 500 <As 1000
TYPE PIPE SIZE "[" SIZE "L" SIZE
"Pe" Pmax (kg) Fmax (kg) Pmax (kg) Fmax (kg)
A C10 A5 170 270 110 260
12" & SM ALLER
B C15 A6 390 490 270 480
1. MATERIAL
2. SEE DWG. NO. ST-M-0001 FOR Tl-IE SIZE OF SHAPE STEEL.
SYMBOL & CODING
P/S STO. NO.

MEMBER TYPE
L---- DIM ·o·
SUPP'T SERIAL NO.
(INDICATE 'MTH
PLAN OWG. NO. ~----DIM "B" LARGEST LINE)
EQV.PIPE SIZE "Pe" ~------DIM "A"
PLAN ISO
REV.
(FOR HOT IN SULA TED RISER PIPE) AO
PLAN 100 A
MIN . (MAX. 1000)
MEMBER "M"
PIPE SIZE •p•
ll12 5 8"x55L BOL T & NUT

50 40 40 10 NUT WELD TO BOLT
15 MIN.
SECTION
INS. T1II "T"
MEMBER "M"
INSUL. THK "T" +90

1. MATERIAL
- LUG PLATE : SAME AS RUN PIPE OR MAT'L TABLE. 4" & SMALLER
UNIT (mm)
CODE RUN PIPE LUG PLATE A :S 500 500 <A $1000
K API 5L GR.8, A106 GR.B A283 GR.C OR EQ. PIPE SIZE
y A335 Pll A387 GR.11 OR EQ. NPS "p" MEMBER ALLOW.LOAD MEMBER ALLOW.LOAD
"M" F(Kg) "M" F(Kg)
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ. 3/4" A5 550 A5 450
z A312 TP321 A240-321 OR EQ. 1· A5 550 A6 850
1-1/2" A6 850 A7 1450
- BOL T/NUT : A307 GR.8 OR EQ. 2" A6 850 A7 1450
2. MAX. ALLOWED MOVEMENT : ±75MM 3" A6 850 A7 1450
3. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL. 4" AlO 2400 C10 1000
SYMBOL & CODING
P/S SID. NO.

SUPP'T SERIAL NO.
PLAN DWG. NO.
PIPE SIZE "p"

PIPE MAT'L
INS.THK "T"
ELEV. "E"
DIM "'A"
~
1i-0091
A~ 9
PLAN ISO
REV.
(FOR HOT IN SULA TED RISER PIPE) AO
100 A
MIN (MAX. 1200)
1. MATERIAL
r=,,,. - - - - - ' !
~;:,;;,~-
- LUG PLA TE : SAME AS RUN PIPE OR MA T'L TABLE.

y A335 Pll A387 GR.11 OR EQ.
6
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
r~ z A312 TP321 A240-321 OR EQ.
~,,,,.,,f------"...,,_,....__.,¡,-_..,......-+~
2. MAX. ALLOWED MOVEMENT : ±130MM

PLAN FOR THE SIZE OF SHAPE STEEL.
PIPE SIZE "p"
EXJSTING o
BEAM "'
o
"'
6
SECTION
6" TO 8"
UNIT lmm1
PIPE SIZE A < 500 500 < A ~ 1000 1000 <A ~ 1200
NPS e MEMBER * ALLOW. LOAD (Kg) MEMBER * ALLOW. LOAD (Kg) MEMBER * ALLOW. LOAD (Kg)
•p• SIZE "M" Fmax Pmax SIZE "M" Fmax Pmax SIZE "M" Fmax Pmax
5• ·r +87 C10 1800 900 C12 2400 500 C12 2000 330
8" "T"+113 C12 2900 1700 C15 3800 1000 C15 3300 600
SYMBOL & CODING
P/S sm. NO.

PIPE MAT'L
SUPP'T SERIAL NO.
INS.THK "T"
PLAN DWG. NO.
~--- ELEV. "E"
PIPE SIZE •p•
~----- DIM "A" PLAN ISO
~--·------------ -------------~--·----- --- -~-----~ -----~------------------------- --- --------- ----- -

GUIDE GS-33 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1186 (FOR COLO INSULA TED RISER PIPE)
AO
BOLT HOLE "h10"
A
.11. 3mm CLEARANCE
(MAX. 600)
PLAN
PIPE SIZE "p"
"L" SIZE
"[" SIZE
SECTION CRADLE
(CRD)
r== 75 & SMALLER

UNIT (mm)
PIPE SIZE CRADLE
r B h10 d
NPS "p" THK "H"
1/2" 50 61 190 14 148
NOTE 3/4" 50 64 190 14 148
1" 50 67 190 14 148
1. MATERIAL
1-1/2" 50 75 220 14 176
2. SEE DWG. NO. ST-A4-1002 FOR THE
DETAIL OF U-BOLT. UNIT (mm)
3. SEE DWG. NO. ST-A4-1019 FOR THE A 5. 400 400<A5.600
DETAIL OF CRADLE. TYPE "L" SIZE
Pmax (kg) Fmax (kg) Pmox (kg) Fmox (kg)
4. SEE DWG. NO. ST-A4-0001 A A5 75 250 50 170
FOR THE SIZE OF SHAPE STEEL. B A6 270 900 180 600
SYMBOL & CODING
SUB-TYPE ---ELEV. "E"
SUPP'T SERIAL NO. - - - - - - D I M "A"
PLAN DWG. NO. ~------PIPE SIZE "p"

PLAN ISO
----------~- -~---------~- ----------

GUIDE GS-34 REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1187 (FOR COLO INSULA TED RISER PIPE)
AO
A
(MAX. 1000)
e e
3mm CLEARANCE TYP.
PLAN
UNIT (mm)
PIPE SIZE "p" COLO INSULATION TH'K 25-50 51-100 101-150
CRADLE TH'K H=50 H=100 H=150
PIPE SIZE DIM C
1/2" 114 164
~ .,.,
3/4" 117 167
"".,.,
w 1
1" LL (.!) 120 170
1):!<.:>
1-1/2" 128 178
2" 84 134 184
2-1/2" 90 140 190
3" 98 148 198
4" 111 161
5" 125 175 o
1- .,.,
138 188
w....
6" "" l
LL >
8" 163 w<.:>
10" 190 ""
r== 76 TO r==200
NOTE
1. MATERIAL
- SHAPE STEEL : A36 OR EQ. UNIT (mm)
2. SEE DWG. NO. ST-A4-1019 A ~
400 400 <A :5: 600
FOR THE DET AIL OF CRADLE. TYPE "L" SIZE
Pmax (kg) Fmax (kg) Pmax (kg) Fmax (kg)
FOR THE SIZE OF SHAPE STEEL. A AS 75 250 50 170
B A6 270 900 180 600
SYMBOL & CODING
P/S SID. NO.
SUB-TYPE
SUPP'T SERIAL NO.

PLAN DWG. NO. ---~
INS. THK 'T"
ELEV.
DIM "A"
"E'
PIPE SIZE "p"

• lcs~I
¡c¿oo I
l
PLAN ISO
REY.
GUIDE GS-35 -
PIPE SIZE "p"

c::r---
'\r-Li
! I/f.v<a"
0
EQUALS lHE
lRUNNION WALL TH'K
-L
- t+:,~
50 VENT
HOLE \
~__,____n_ ~!
~i· -t
1
1 ' 1
1 1 1
1
1
1
1
1
'
1
'
1 1 1
1
1
1
1
1
1
¡;v- i
50 VENT
HOLE
*
~-+---n-
\
\
11
111
'
!
1 1
'
1
:
~! i yt-v
!17-i I n-/ AS
BLBV. "P"
~1 )
TYPl-1
~ EXISTING STEEL
TYPl-T

NPS "p' PIPE A t
NOTE 1-1/2" 1" 140 6
1. SEE DWG. NO. ST-A4-0004 2" 1.1 /2" 140 6
FOR APPLICATION OF REINFORCING PAD 3" 2· 140 6
AND TRUNNION ALLOWABLE LOADS. 4" 2· 140 6
6" 4• 160 9
2. MATERIAL
8" 4" 160 9
10" 6" 210 12
12" 8" 260 12
CODE RUN PIPE SUPPORT PIPE 14" 8' 260 12
16" 10" 320 12
y A335 P11 A335 P11 OR EQ.
18" 10" 320 12
w A335 P22 A335 P22 OR EQ.
20" 12· 350 12
X A312 TP304, TP316 A312 TP304 OR EQ.
24" 12· 350 12
z A312 TP321 A312 TP321 OR EQ.
SYMBOL & CODING
p /S STD NO
SUB- TYPE
1
. . j__j1
.Qg5f-Q.~-_1lQQ1-J.f-11§~-i1]~-l!:... l
l~ REINF.PAD
(IF REQ'D)
TRUNNINON MA T'L
~ y
SUPP'T SERIAL NO. -
PLAN DWG. NO. - - - - - - - "
~----
' - - - - ELEV. "F"
ELEV. "E"
1 osLrml 1 Gs3d-oog I
PIPE SI ZE "p"
PLAN ISO
REV.
GUIDE HGS-35
TRUNNION TYPE ON STRUCTURE)
PIPE SIZE "p"
a" EQUALS THE

a TRUNNION WALL n-i'K
!ID. "l. !ID. "I"
8o
50 VENT 50 VENT 00
HOLE HOLE x
<t:
~
!ID. ..,.. o
N
TYPl-E
L_____ EXISTING STEEL
TYPE-T
~4~6E
3mm A
TYP. ~~~A5(HEIGHT 50)
'1]~[F ==f 30
.. !so 1 ..
BASE PLATE BASE PLATE
4'' & SM ALLER 6" TO 24"

UNIT (mm)
NPS 'p' PIPE A tl
1-1/2" 1" 140 9
2" 1.1 /2" 140 9
3" 2" 140 9
4" 2" 160 16
6" 4" 160 16
8" 4" 160 16
1. MATERIAL
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA T'L TABLE. 10" 6" 210 16
12· 8" 260 20
14" 8" 320 20
CODE RUN PIPE SUPPORT PIPE 10·
16' 320 20
y A335 P11 A335 P11 OR EQ. 18" 10" 350 20
w A335 P22 A335 P22 OR EQ. 20" 12" 350 20
X A312 TP304, TP316 A312 TP304 OR EQ. 24" 12" 460 20
z A312 TP321 A312 TP321 OR EQ.
SYMBOL & CODING
P/S STD. NO.

SUB-TYPE PIPE MAT'L
SLJpp'T SERIAL NO. ~--ELEV. "F"

PLAN DWG. NO. ----~ HGS35E-009
HGS35E-009
PIPE SI ZE "p" ~---- ELEV. "E"
PLAN ISO
REV.
GUIDE GS-36
(TRUNNION TYPE ON STRUCTURE) AQ
PIPE SIZE "p"
a" EQUALS THE

TRUNNION °01"
COLUMN "02"
oo
N
5~ VENT 5~ VENT
HOLE HOLE
o ILIV. "F" o
N N
TYP!-B
L__ EXISTING STEEL
_J TYP!-T

NPS "p" PIPE A t
NOTE 1"
1-1/2" 140 6
1. SEE DWG. NO. ST-A4-0004 2" 1.1 /2" 140 6
FOR APPLICA TION OF REINFORCING PAD 3" 2" 140 6
AND TRUNNION ALLOWABLE LOADS. 4" 2" 140 6
6" 4" 160 9
2. MATERIAL
- PLA TE : A36 OR EQ. 8" 4" 160 9
- TRUNNION "Q1" : SAME AS RUN PIPE OR MAT'L TABLE. 10· 6" 210 12
CODE RUN PIPE TRUNNION "Q1" 12" 8" 260 12
y A335 P11 A335 P11 OR EQ. 16" 10" 320 12
w A335 P22 A335 P22 OR EQ.
18" 10"
X A312 TP304, TP316 A312 TP304 OR EQ. 320 12
z A312 TP321 A312 TP321 OR EQ. 20" 12" 350 12
- ANGLE : A36 OR EQ. 30" 16" 450 16
- COLUMN "Q2" : API 5L OR EQ. 36" 18" 500 22
SYMBOL & CODING
P/S STD. NO.

SUB-TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO. ---~
~--
REINF.PAD
(IF REQ'D)
TRUNNINON MA T'L
ELEV. "F"
~
1csL09.
p
1Gs3J-oog1
PLAN ISO
-------- - ----- ---- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - · - - - - - - - - - - - - -- ----

GUIDE GS-41 REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1190 (1/2) (FOR COLO INSULA TED PIPE, _,
TRUNNION TYPE ON STRUCTURE J AO
PIPE SI
ZE • •
p/
/~
i /
hv-<
0
"a"EQUALS THE
TRUNNION WALL TH'K
PIPE SIZE "p"
• a"EQUALS THE
- ~
~
TRUNNION WALL TH'K
-t-- ----------- EllV

---- ·1·
ur-1'
1
~ ~
5\il VENT HOLE : ' ~ TRUNNION "Ql" 1

1
1
1
~ jWr
1 1
URETHANE BLOCK "'- : 1
. . '-o--'
I~
(URB) _. .• ;¡ 6
nJl::::::r::\lln t n.11·...... ········u n/

""'
:¡: ir . As
TYPE-E TYPE-T
3mm A
n?~~[fil
• 11 · · 1
BASE PLATE
UNIT (mm)
NPS •p• PIPE A t
NOTE 1--1/2" 1' 140 6
1. SEE DWG. NO. ST--M-0004 2" 1.1/2" 140 6
FOR APPLICATION OF REINFORCING PAD 3" 2" 140 6
ANO TRUNNION ALLOWABLE LOADS. 4" 2" 140 6
6" 4" 160 9
2. MATERIAL
8" 4" 160 9
-- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA T'L TABLE.
-- PLATE : A36 OR EQ. 10" 6" 210 12
12" 8" 260 12
14" 8" 260 12
K API 5l GR.B, A106 GR.8 API SL GR.B OR EQ.
16" 10" 320 12
18" 10" 320 12
w A335 P22 A335 P22 OR EQ.
A312 TP304 OR EQ. 20· 12" 350 12
X A312 TP304, TP316
z A312 TP321 A312 TP321 OR EQ. 24" 12" 350 12
SYMBOL & CODING
P/s SID. No ·
SUB--TYPE
1§±)~--Q_01_--_1lQQ!--Jf--!1§~-i!]~--~!:_1
:J ~
L REINF.PAD
(IF REQ'D)
TRUNNINON MA T'L
~ p
GS4~009
SUPP'T SERIAL NO. -
PLAN DWG. NO. ---~
' - - - - - EUEV. "F" 1 GSLoog I
1 I
PIPE SIZE "p" ~---- EUEV. "E"
PLAN ISO
¡____ - - - - - - --------------
GUIDE GS-50 REY.
PIPING SUPPORT STANDARD DWG. ST-M-1190 (2/2) (U-BOL T TYPE ON STRUCTURE) AO
3mm CLEARANCE
PIPE SIZE "p"

-~--
MEM8ER "M"
BOL T HOLE "h91" /
EXISTING STEEL
EXISTING STEEL
TYPE-A
3mm CLEARANCE
PIPE SIZE "p"

-4:---
MEM8ER "M"
BOL T HOLE "hl!I" /
EXI STI NG STEEL
\ EXISTING STEEL
NOTE
1. MATERIAL TYPE-B
K APl-5L GR.B, A106 GR.8 A307 GR.B UNIT (mm)
y A335 P11 A193-B7 /A194-2H PIPE SIZE MEMBER SIZE 'M' e llih ALLOWABLE
w A335 P22 A193-87/A194-2H NPS "p" LOAD(Kg)
X A312 TP304, TP316 A320-B8/A194-8 1/2' A5 35 7 140
z A312 TP321 A320-B8/A194-8 3/4" 40 7 140
2. SEE DWG. NO. ST-A4-1001 FOR THE DETAil OF U-BOLT.

1" 45 7 140
1-1/2" 60 11 330
3. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL. 2" 75 11 330
SYMBOL & CODING
( 1 )
J 1
P/S STD. NO. PIPE MATERIAL

SUB- TYPE ~-- ELEV "F'
j G'°A-009 j
SLJpp'T SERIAL NO. ~---- ELEV "E"
PLAN DWG. NO. ----~ ~------ PIPE SIZE "p"
PLAN ISO
REV.
GUIDE GV-21
(FOR BARE RISER PIPE; VESSEL CLIP) AQ
75 40
p
6
A 3mm CLEARANCE
SOUTH
(MAX.600)
PLAN
PIPE SIZE "p"
UNIT (mm)
PIPE SIZE
B
c h10
CLIP 101A NPS "p" TYPE-A TYPE-B
FURNISHED BY 1/2" 90 25 38 11
VESSEL VENDOR
314• 90
ELEV. "I!• 1· 90
1-112'' 120
2· 120
2-1/2" 150 14
3• 180 14
4• 200 18
SECTION
UNIT (mm)
CLIP CLIP A ~ 400 400 < A~ 600
a b h\11 BOLT SIZE "L" SIZE
TYPE MARK Pmax (kg) Fmax (kg) Pmax (kg) Fmax (kg)
A 101A 30 20 18 5/8" X 40 AS 75 250 50 170
1. MATERIAL B 1018 40 35 21 3/4" X 45 A7 270 900 180 600
- BOL T/NUT : A307 GR.B-GALV. OR EQ.
K APl-SL GR.B, A106 GR.B A307 GR.B
y A335 P11 A193-B7 /A194-2H
w A335 P22 A193-87 /A194-2H
X A312 TP304, TP316 A320-88/A194-8
z A312 TP321 A320-88/A194-8
2. DIM "L"= R-)R'-c'
SYMBOL & CODING
CLIP TYPE
PIPE MATERIAL
ELEV. "E"
' - - - - - - ORIENTATION
~1\ Z500~t
SUPP'T SERIAL NO. (DEGREE) GV21A-009
PLAN DWG. NO. ---~
' - - - - - - - DIM "A"
' - - - - - - - - - P I P E SIZE "p" PLAN ISO
----------------------- ------------------------·----· - - - - ------ ----------~-----·- - ---------------

REV.
PIPING SUPPORT STANDARD DWG. ST-M-1192 (1/2) GUIDE GV-22
(FOR BARE RISER PIPE; VESSEL CLIP) AO
NORTH L A
(MAX. 1000)
1-
' .¡.
1
' TYP.
1 120
'
1
SOUTH
PLAN
PIPE SIZE "p"

75 40
FURNISHED BY
VESSEL VENDOR
ILIV. "I• o
ft 12 WELD TO BOLT HOLE "h~"

BRACKET "[" UNIT mm
PIPE SIZE
SECTION
NPS "p"
B e
5" TO 12" 6" 88 100
8" 113 120
10" 140 150
12" 165 170
1. MATERIAL
- BOL T/NUT : A307 GR.B-GALV. OR EQ. UNIT (mm)
2 A ~ 500 500 <A~
1000
2. DIM. "L"=R-JR' -C CLIP CLIP
TYPE MARK j h~ BOLT SIZE "[" SIZE "L" SIZE Pmax (kg) Fmax (kg) Pmax (kg) Fmax (kg)
3. SEE DWG NO. ST-A4-0001 A 103A 100 21 3/4" X 50 C10 A5 170 270 110 260
FOR THE SIZE OF SHAPE STEEL. B 103B 150 21 3/4" X 50 C15 A6 390 490 270 480
SYMBOL & CODING
DIM "R"
CLIP TYPE (OUTSIDE RADIUS)
ELEV. "["
SUpp'T SERIAL NO.
~--- ORIENTATION
PLAN DWG. NO. (DEGREE)
PIPE SIZE "p" L - - - - - - - D I M "A"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1192(2/2)
GUIDE GV-23
L 75 40
EQUIVALENT
PIPE SIZE "Pe"
6
pe= Jf?:;:P,'
2-BOLT & NUT 3mm CLEARANCE
SOUTH
A
(MAX.600)
PLAN
PIPE SIZE "Pe"
10 30
'
1
CLIP 101A B
'
FURNISHED BY
1
VESSEL VENDOR
EIEV. "E• .<>

,_J' __
o ' '
1
.<> '
1
'
1
'
2-BOLT HOLE "hll"
SECTION
Pe=4" & SMALLER
UNIT (mm)
CLIP CLIP A 5. 400 400<A5.600
a b hll BOLT SIZE "L'' SIZE
A 101A 30 20 18 5/8" X 40 AS 75 250 50 170
B 1018 40 35 21 3/4" X 45 A7 270 900 180 600
1. MATERIAL
2. DIM "L"= R-~
SYMBOL & CODING
DIM "R"
(OUTSIDE RADIUS)
CLIP TYPE
~--- ELEV. "E"
SUPP'T SERIAL NO. ~----- ORIENTATION
(DEGREE)
PLAN DWG. NO. - - - - - '
~-------DIM "B"
EQV. PIPE SIZE "p" ----~ ' - - - - - - - - - - - D I M "A" PLAN ISO
REV.
GUIDE GV-24
(FOR BARE RISER MUL TI-PIPE; vt:SSEL CLIP) AO
NORTH A
(MAX. 1000) U-BOLT
1
~
' A 2
1
1 ~
_['\_~ º:!===
o
o
SOUTH p
PLAN
CLIP #103A/B
75 40
FURNISHED BY
vt:SSEL vt:NDOR
....o
ILIV. "I•
~P .
"[" SIZE
ll 12 WELD TO BOL T HOLE "hl'l'

BRACKET "["
SECTION
Pe=12" & SMALLER
UNIT (mm)
CLIP CLIP A ~ 500 500 <A ~ 1000
j h l'l BOLT SIZE "[" SIZE 'L" SIZE
TYPE MARK Pmox (kg) Fmox (kg) Pmox (kg) Fmox (kg)
1. MATERIAL A 103A 100 21 3/4" X 50 C10 A5 170 270 110 260
- SH APE STEEL : A36 OR EQ. B 1038 150 21 3/4" X 50 C15 A6 390 490 270 480
2
2. DIM. "L"=R-)R' -C
3. DIM. "C" =B /2-([ +12)

SYMBOL & CODING

GS8A
CLIP TYPE
GV24A-009
SUPP'T SERIAL NO. ' - - - - - - - ORIENTA TION
PLAN DWG. NO. (DEGREE) (INDICATE 1'11TH
EQV.PIPE SIZE "Pe" ---~ c____ _ _ _ _ _ DIM "B" LARGEST UNE)
DIM "A" PLAN ISO
·---------··-------------- . ____ .... _

REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1194 GUIDE GV-25
NOTE
NORTH
1 1. MATERIAL
1
1
2. DIM "M"=(A+L)-85
__[i ___ u
3. DIM ''L"= R-J R'-c'

1
' u FOR THE SIZE OF SHAPE STEEL.
1
1
'
1 120 10
SOUTH
PLAN
10 e
50 PIPE SIZE "p"
CLIP #104A/B/C
FURNISHED BY
VESSEL VENDOR "[1" SIZE
IIEV. "E•
le. 12 WELD TO
BRACKET "["
""'+----
"[" SIZE
PIPE SIZE
NPS "p" B c
14" 181 190

lfi" 207 220
ll 12 WELD TO 1R" 232 240
BRACKET "[" 257 270
20·
SECTION 22· 283 290
14'' TO 32" 24" 308 320
?6" 333 350
28" 359 380
30" 384 400
32" 410 430
UNIT (mm)
CLIP CLIP BOLT A ~ 1200 1200 <A ~ 1700

TYPE MARK
e g h~
SIZE
"[" SIZE ·cr SIZE
A 104A 150 30 60 45 18 42 5/8" X 60 C15 C15 650 2000 250 1580

B 104B 200 45 90 55 21 64 3/4" X 65 C20 C15 1100 2000 450 1700
c 104C 300 75 150 75 28 106 1" X 65 C30 C15 1160 2000 490 1700
SYMBOL & CODING
CLIP TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO.
ORIENTA TION
(DEGREE)
•
1G'A-0091 ?'
~~
rl·!:Y'
GV25A-009
PIPE SIZE "p" DIM "A" PLAN ISO

GUIDE GV-26 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1195 (FOR BARE RISER MUL TI-PIPE;
VESSEL CLIP) AO
L A
NORTH (MAX. 1000) U-BOLT
1 A 2 /(UITT)
' j t. . EQUIVALENT
1
PIPE SIZE "Pe"
1 / Pe= jp; +P2H --
_ti_ ___ u
u
NOTE
1. MATERIAL
o - SHAPE STEEL : A36 OR EQ.
p- - BOLT/NUT : A307 GR.B-GALV. OR EQ.
SOUTH 6-BOLT & NUT 2. DIM "M" =(A+L)-85-230
PLAN 3. DIM "L"= R-~

4. DIM "e" =1 /28-(L +12)
M
CLIP 104A 5. SEE DWG. NO. ST-A4-0001
FURNISHED BY 85 40 FOR THE SIZE OF SHAPE STEEL.
VESSEL VENDOR
....o \
o-+----
..-,,+---
....o
fl 12 WELD TO
BRACKET "["
fl 12 WELD TO
BRACKET l."
Pe= 14" TO 32"
UNIT (mm)
A ~ 1200 1200 <A ~ 1700
CLIP CLIP BOLT
j e f g h~
k "[" SIZE "L" SIZE
TYPE MARK SIZE Pmox (kg) Fmox (kg) Pmox (kg) Fmox (kg)
A 104A 150 30 60 45 18 42 5/8" X 60 C15 A10 650 2000 250 1580

B 1048 200 45 90 55 21 64 3/4" X 65 C20 A10 1100 2000 450 1700
c 104C 300 75 150 75 26 106 1" X 65 C30 A10 1160 2000 490 1700
SYMBOL & CODING

GS8A
DIM "R"
(OUTSIDE RADIUS)
CLIP TYPE ELEV. "E" GV26A-009
SUPP'T SERIAL NO. ~---ORIENTA TION
(INDICA TE 'MTH
PLAN DWG. NO. --~ (DEGREE) LARGEST UNE)
" - - - - - - - - D I M "B"
EQV.PIPE SIZE "Pe"---~ ~-------DIM "A" PLAN ISO
l ________ ---------- - - - - - - - - - - - - - - ------------ -·----------------------------- - -- -- - --

GUIDE GV-31 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1196 (FOR HOT INSULATED RISER PIPE;
"fSSEL CLIP AO
A.
(MAX. 600) '
NORTH
1
1 75 40 "L" SIZE
' 1
'
1
' lp
1
~D 6
---~¡
- -
' 1'
1
2-BOLT & NU
1
SOUTH
PLAN
PIPE SIZE "p"

INS. TBI "T"
.,.,o
-
-o
N
CLIP 1/102A/B
FURNISHED BY
VESSEL "fNDOR
SECllON
3" & SMALLER
UNIT (mm)
CLIP CLIP BOLT A 5: 400 400 < A5: 600

a b h~ "L"SIZE
TYPE MARK SIZE Pmax (kg) Fmax (kg) Pmax (kg) Fmax (kg)
1. MATERIAL A 102A 30 20 18 5/8" X 40 AS 75 250 50 170
- LUG PLA TE : SAME AS RUN PIPE OR MA T'L TABLE. B 102B 40 35 21 3/4" X 45 A7 270 900 180 600

y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.

- BOLT/NUT : A307 GR.B-GALV. OR EQ.
SYMBOL & CODING
CLIP TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO.
PIPE MAT'L
INS.THK "T"
ELEV. "E"
ORIENTATION
~
1G'-0091 ./
~º~
rl·!Y
GV31A-009
(DEGREE)
GUIDE GV-32 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1197 (FOR HOT INSULA TED RISER PIPE;
VESSEL CLIP) AO
L !
(MAX. 1000)
4-BOLT & NUT

SOUTH
PLAN p
PIPE SIZE "p"
CLIP 103A INS. TRI "T•

FURNISHED BY
VESSEL VENDOR
....o
El.IV. "E.
..,.,
o
....o
fl 12 WELD TO
BRACKET T BOL T HOLE "h\!"
UNIT (mm)
SECTION 3" TO 8"
PIPE SIZE
B e
1. MATERIAL NPS "p'º
- LUG PLATE : SAME AS RUN PIPE OR MAT'L TABLE. 3• "T" +58 "T"+ 70
CODE RUN PIPE LUG PLATE 4" "T"+70 ·r+80

K API 5L GR.B, A106 GR.B A283 GR.e OR EQ.
¡;" "T"+97 "T"+110
y A335 P11 A387 GR.11 OR EQ. 8" T+123 "T"+140
w A335 P22 A387 GR.22 OR EQ. 1n" ·r +14o "T" +162
X A312 TP304, TP316 A240-304 OR EQ. 12" "T"+175 "T"+188
z A312 TP321 A240-321 OR EQ.

- BOLT/NUT : A307 GR.B-GALV. OR EQ. CLIP CLIP A S 400 400<AS600
TYPE MARK
j h\! BOLT SIZE "[" SIZE ''L" SIZE
Pmox (kg) Fmox (kg) Pmax (kg) Fmox (kg)
2. DIM "L"= R-)R'-c'
A 103A 100 21 3/4" X 50 C10 A5 170 270 110 260
3. SEE DWG. NO. ST-M-0001 B 1038 150 21 3/4" X 50 C15 A6 390 490 270 480
FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
PIPE MAT'L
CLIP TYPE INS.THK "T"
~--DIM "R''
SLJpp'T SERIAL NO. (OUTSIDE RADISU)
PLAN DWG. NO. _ __ J
' - - - - - - ELEV. "E"
PIPE SIZE "p" ' - - - - - - - - - - - ORIENTA TION
(DEGREE)
DIM "A" - - - - - - - - - ' PLAN ISO
-------------------- ---------~---------------- ----------


GUIDE GV-33 REV.
(FOR HOT INSULA TED RISER PIPE:
VESSEL CLIP) AO
A
(MIN. 600, MAX. 1700) 1. MATERIAL
B ! B - LUG PLA TE : SAME AS RUN PIPE OR MA T'L TABLE.
3mm CLEARANCE TYP.
p COOE RUN PIPE LUG PLA TE
K API 51. GR.8, A106 GR.8 A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
W A335 P22 A387 GR.22 OR EQ
X A312 TIP304, TP316 A240-304 OR EQ.
z A312 TIP321 A240-321 OR EQ.
- BOL T/NUT : A307 GR.8-GALV. OR EQ.
2. DIM °M"=(A+L)-85
3. DIM ''L"= R-) R'-c'
PLAN
SOUTH
PIPE SIZE "p"
CLIP #104A/B/C
FURNISHED BY
50 JNS. TBI •r
VESSEL VENDOR
C)
~ UNIT mm
PIPE SIZE
C)
U")
NPS •p• B e
le. 12 'M:LD TO
BRACKET "[" "T" +191 ·1· +200
::::;;
T+217 "T" +230
"T"+242 ·1· +250
"T" +267 "T" +280
·1· +293 "1"+300
24" "1"+318 "T" +330
SECTION
6" "T" +343 "T" +360
"1"+369 "T" +390
14" & LARGER 30" "T" +394 "1"+410
32" "T" +420 "T"+440
UNIT (mm)
CLIP CLIP BOLT A :<;. 1200 1200 <A :<;. 1700

j e f g h~
k "[" SIZE T1" SIZE
A 104A 150 30 60 45 18 42 5/8" X 60 C15 C15 650 2000 250 1580
B 1048 200 45 90 55 21 64 3/4" X 65 C20 C15 1100 2000 450 1700
e 104C 300 75 150 75 28 106 1" X 65 C30 C15 1160 2000 490 1700
SYMBOL & CODING
PIPE MAT'L
• 1 s 00~
IG~A-0091
CLIP TYPE INS.THK "T" rL·,Y
SUPP'T SERIAL NO. DIM "R"
PLAN OWG. NO. (OUTSIDE RADIUS)
ELEV. "E" / GV33A-009
PIPE SIZE "p" ORIENTATION
DIM "A" (DEGREE) PLAN ISO
GUIDE GV-41 REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1201 (FOR COLO IN SULA TED RISER PIPE;
\/ESSEL CLIP) AO
L 5 40
NORTI-1
1 BOLT HOLE "h11l"
t\__~1-t-trf~rl'=-: =-=~º=-=:-=:=~:=B-: -:~ : -:~: -: º:=-=- =~H=:=E-T': f:- ,=~t l;s-r: Al : -~ ]~

2-BOLT & NUT
SOUTH
A
.11 3mm CLEARANCE
PLAN (MAX. 600)
1 PIPE SIZE •p•
~
10 30
"L" SIZE
CLIP 101A B ~ 1---t--.., INS. TBI T
~il~
FURNISHED BY 11 11~
\/ESSEL \/ENDOR 1 1 1 1
1
'
IIIV. "I•
CRADLE
10 (CRD)
2-BOL T HOLE hll
r=75 & UNDER

UNIT (mm)
PIPE SIZE CRADLE c hlll
r B d
NOTE NPS "p" ltlK "T" TYPE-A TYPE-B
112· 50 61 190 35 48 14 148
1. MATERIAL
3/4" 50 64 190 14 148
- SHAPE STEEL : A36 OR EQ. 1· 50 67 190 14 148
- BOL T/NUT : A307 Gr.B-GALV. OR EQ.
1-1/2" 50 75 220 14 176
2. ~2 2
DIM "L"= R- "R -C
3. SEE DWG. NO. ST-A4-1002 FOR ltlE

DETAil OF U-BOL l. UNIT (mm)
CLIP CLIP BOLT A ::; 400 400<A:<;600
4. SEE DWG. NO. ST-A4-1019 FOR ltlE a b hll "L" SIZE
DETAil OF CRADLE. TYPE MARK SIZE Pmax (kg) Fmax (kg) Pmax (kg) Fmax (kg)
A 101A 30 20 18 5/8" X 50 AS 75 250 50 170
5. SEE DWG. NO. ST-M-0001 B 101B 40 35 21 A7 270 900 180
3/4" X 55 600
FOR ltlE SIZE OF SHAPE STEEL.
SYMBOL & CODING
SLJpp'T SERIAL NO.

PLAN DWG. NO. ---~
DIM "R"
( OUTSIDE RADIUS)
' - - - - - - - ELEV. "E"
'--------ORIENTA TlON
,,,~+"'
/~
PIPE SIZE "p" (DEGREE)
' - - - - - - - - - - DIM "A" PLAN ISO
-
i

GUIDE GV-42 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1202 (FOR COLO IN SULA TED RISER PIPE; AQ
VESSEL CLIP
(MAX. 1000)
c c
3MM CLEARANCE TYP.
SOUTH
PLAN \ 4-BOLT & NUT
(UNIT: mm)
COLD INSULA TION lH'K 25-50 51-100 101-150
CLIP #103A/B CRADLE TH'K T=50 T=100 T=150
FURNISHED BY 75 40
PIPE SIZE DIM C
VESSEL VENDOR
1/2" 114 164
o
1-
3/4" 117 167
"":;;:
wl
1" LL > 120 170
Wc.'.l
1-1/2" "" 128 178
11.EV. "E. 2" 84 134 184
2-1/2" 90 140 190
3" 98 148 198
4• 111 161
5" 125 175 o
1 1 1 1 1 1- n
188
w....
1 1 1 1 6" 138 ""
BOLT HOLE h¡l 1 1 t l 1 l
>
~'~
LL
8" 163 wc.'.l
10· 190 ""

SECTION ~~
r= 76 TO r=200
NOTE
1. MATERIAL
- BOLT/NUT: A307 Gr.B-GALV. OR EQ.
UNIT lmm)
2. DIM "L"= R-)R -C
2 2
CLIP CLIP BOLT A ~ 500 500 <A~ 1000
j h\l "[" SIZE "L" SIZE
FOR THE DETAil OF CRADLE. A 103A 100 21 3/4" X 60 C10 A5 170 270 110 260
B 1038 150 21 3/4" X 60 C15 A6 390 490 270 480
SYMBOL & CODING
P/S SID. NO.

CLIP TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO.
PIPE SIZE "p"
DIM "A"
INS. THK "T"
DIM "R"
(OUTSIDE RADIUS)
ELEV. "E"
ORIENTATION
(DEGREE)
• 1GV'2~1
1
1lm-0011
PLAN ISO
·------·- - - - - - - - - - · - - - ----·- -- - - · - · - - - - - - - - - - - - - · - - - - - - - - - - - - - - - - - · - - - - ---·---------- ·-·

GUIDE GV-43 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1203 (FOR COLO INSULA TED RISER PIPE;
VESSEL CLIP AO
UNIT (mm)
C!X.D INSULATION TH'K 25-50 51-100 101-150151-20\Xl01-2!l(JL51-JUl
CRADLE TH'K H=50 H=100 H=150!-i=200IH=250 H=300
PIPE SIZE DIM. C
1-1 /2" 228 - -
2· 234 - -
2-1 /2" REFER TO 240 - -
GV-42
3• 248 - -
4• 211 261 - -
5• 225 275 - -
5• 238 288 - -
8" 213 263 313 363 -
10" 240 290 340 390 -
12" 215 265 315 365 415 -
14" 231 281 331 381 431 -
16" 257 307 357 407 457 -
18" 282 332 382 432 482 -
20· 307 357 407 457 507 557
22· 333 383 433 483 533 583
24• 358 408 458 508 558 608
PIPE SIZE •p•

85 50
CLIP 104A 8 C
FURNISHED BY
VESSEL VENDOR
ELEV. "E•
10
INS. THK •r
r=201 & LARGER

SECTION
UNIT (mm)
NOTE CLIP CLIP A ~ 1200 1200 <A~ 1700
e g h~ BOLT SIZE "[" SIZE "[1" SIZE
1. DIM "M" =(A+L)-85 A 104A 150 30 60 45 18 42 5/8" X 70 C15 C15 650 2000 250 1580
2 2
2. DIM "L"= R-)R -C B 1048 200 45 90 55 21 64 3/4" X 75 C20 C15 1100 2000 450 1700
3. MATERIAL c 104C 300 75 150 75 26 106 1" X 75 C30 C15 1160 2000 490 1700
4. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF

SHAPE STEEL.
SYMBOL & CODING
CLIP TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO.
PIPE SIZE "p"

INS. THK "T"
f¡IM "R"
OUTSIDE RAOIUS)
ELEV. "E"
ORIENTATION
(DEGREE)
DIM "A"
1
• 1Gv.~91
ov¿-oos¡
PLAN
1
ISO
GUIDE GV-51 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1204 (FOR COLD INSULA TED RISER PIPE;
VESSEL CUP) AO
A
(MAX. 600)
125 95 r j
NORTH U - BOLT
1
1
' '
/ (UBTC)
1
1
'
[\
'
__
1
1
'
1
SOUTH .11. 3mm CLEARANCE
PLAN~
PIPE SIZE "p"
"L" SIZE
CLIP 121
FURNISHEO BY
VESSEL VENDOR
.,.,
o
El.IV. "l.
1.. 200 .. 1
CRADLE
(CRD)
/ URETHANE BLOCK
(URBV) INS. TRI "T"
5/8" NUTS /
WELD TO ~ ~ UNIT (mm)
PIPE SIZE CRADLE
r= 75 & SMALLER NPS "p" THK "H"
r B h11'l d
SECTION
1/2" 50 61 190 14 148
3/4" 50 64 190 14 148
NOTE 1" 50 67 190 14 148
1-1/2" 50 75 220 14 176
1. MATERIAL
2. SEE DWG. NO. ST-A4-1002 FOR THE DETAil
OF U-BOLT. UNIT (mm)
3. SEE DWG. NO. ST-A4-1021 FOR THE DETAil OF A 5- 400 400 <A 5- 600
CLIP CLIP
URETHANE BLOCK ASSEMBL Y. K "L" SIZE
4. SEE DWG. NO. ST-A4-1019 FOR THE DETAil OF 60 200 40 130
A 121A 25 A5
CRADLE.
B 1218 35 A7 210 720 140 480
5. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF
SHAPE STEEL.
SYMBOL & CODING
CUP TYPE
SUPP'T SERIAL NO. ~---- ORIENTATION
~-----DIM "A"
GUIDE GV-52 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1205 (FOR COLO IN SULA TED RISER PIPE;
VESSEL CUP) AO
A
(MAX. 1000)
190
B 45. ¡· ,~º¡59¡ 1 45
BOL T HOLE "h9l"
NORTH
o
"'
SOUTH SECTION "X" - 'X"

TYP.
UNIT (mm)
OOJl INSULA1100 JH'K 25-50 51-100 101-150
PIPE SIZE "p"
CRADLE TH'K H=50 H=100 H=150
125 95
CRADLE PIPE SIZE 'p" DIM. B/C
(CRD) 1/2" o 114/170 164/230
>--
3/4" 117/170 167/230
""1
W> "'
1'' i::Jc..o 120/170 170/230
1-1 /2" "" 128/170 178/230
URETHANE BLOCK 2" 84/140 134/190 184/230
(URBV)
o 2-112· 90/140 140/190 190/240
3" 98/140 148/190 198/240
4• 111/170 161/220
5" 125/170 175/220 o>-...,
6" 138/180 188/230 wu_>l """'
"[" SIZE 1 w'-"
8" 63/210 ""
10" b90/240
'
SECTION /5/8" NUTS ' INS. TBI "T"
WELD TO 11'.
CLIP 122A B
FURNISHED BY VESSEL VENDOR
NOTE r= 76 TO r=200
1. MATERIAL
2
2. DIM "L"= R- JR 2 -C
UNIT (mm)
3. SEE DWG. NO. ST-A4-1019 FOR THE DETAil A ~ 500 500 <A ~ 1000
CLIP CLIP
OF CRADLE. TYPE MARK h9l a "[" SIZE "L" SIZE
URETHANE BLOCK ASSEMBL Y. A 122A 18 180 C10 A5 170 270 110 260
B 122B 18 230 C15 A6 390 490 270 480
5. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF
SHAPE STEEL.
SYMBOL & CODING
P/S STO. NO. INS. THK "T"

CLIP TYPE DIM "R"
(OUTSIDE RADIUS)
SUPP'T SERIAL NO. ~--- ELEV. "E"
PLAN DWG. NO. - - - - ' ' - - - - - - - ORIENTATION
(DEGREE)
PIPE SIZE "p" - - - - - - - - ' L____ _ _ _ _ _ DIM "A"
PLAN ISO
GUIDE GV-53 REV.
PIPING SUPPORT STANDARD DWG. ST-M-1206 (FOR COLO INSULATED RISER PIPE;
VESSEL CLIP) AO
~_ L " ! (MIN. 1000, MAX. 1700) I
NORTH
1
' "'(:
\
dI7l
=='!t.<:
1
B
p
' B 3mm CLEARANCE (TYP.\
-ti- : ¡_ _¡"' F'l___ :
LJ
i -: ---je~-~~- -1~: ;..~~T
\ ·, 1 ..
' "' -lf- i /l,.,,i,,,~ i

1
SOUTH
J :W
. ..
!;:311' :
~
....,; 120
~
1
-+-1º
<n
~i! 98
PLAN
CRADLE
(CRD)
"[1" SIZE SECTION ·x· -·x· SECTION "Y- "y"
URETHANE BLOCK ~
(URBV) .--',,..,__..
oe ~I
...
uv-.L..__.-i._·- f.--1
"' ~1 :::::. ·- - - -- - --i--
~
~1~ 1tJ "[" SIZE ~'V " ' " ' 45' 11 UNIT (mm)
~,'/,,'/, ~
C<Xll INSULATION lll'K 25-50 51-100 101-150 151-200 201-250 251-300
NUTS 'M:LD TO R./ ! ¡ j

1
CRADLE TH' H;50 H;100 H;150 H;200 H;250 H;300
\ :>-1 '/, tr-{ o PIPE SIZE •p• DIM. B/C
D. ,%, Hi 1-1 /2"

2"
228/300
234/300
-
-
-
-
CLIP #123A/8/C ~:I v-''/, INS. TRI: ~/ 2-1/2"
3•
REFER TO
GV-52
240/320
248/330
-
-
-
-
FURNISHED BY "' :~_._._._._._._._
VESSEL VENDOR "..., + _ 4" 211/300 261/330 - -
~ ~ 5• 225/300 275/360 - -
6" 258/330 288/360 - -
SECTION r=201 & LARGER 8" 213/300 263/330 313/380 363/430 -
10· 240/320 290/360 340/400 390/460 -
NOTE 12· 215/300 265/330 315/380 365/430 415/460 -
1. MATERIAL 14" 231/300 281/360 331/400 381/460 431/500 -
- SHAPE STEEL : A36 OR EQ. 16" 257/330 307 /380 357 /430 407 /460 457 /530 -
18" 282/360 332/400 382/460 432/500 482/560 -
2. DIM "M";(A+L+d)-125-15-83
20· 307 /380 357 /430 407 /460 457 /530 507 /580 557 /630
3. DIM "L"; R-~ 22· 333/400 383/460 433/500 483/560 533/610 583/660
4. SEE OWG. NO. ST-M-1019 FOR THE DETAil OF 24" 338/400 408/460 458/530 508/580 558/630 608/680
CRADLE.
5. SEE DWG. NO. ST-M-1021 FOR THE DETAil OF UNIT (mm)
URETHANE BLOCK ASSEMBL Y. A ~ 1200 1200 <A ~ 1700
CLIP CLIP
TYPE MARK a b d hYl "e. SIZE "[1" SIZE
6. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF Pmax (kQ Fmox ka) Pmox lko) Fmax lko)
SH APE STEEL. A 123A 230 220 150 18 C15 C15 520 1600 200 1260
B 123B 280 290 200 21 C20 C15 880 1600 360 1360
e 123C 380 430 300 28 C30 C15 920 1600 390 1360
SYMBOL & CODING

~~-~~-,!lgQl-l~-~~-Q1~-Q.~-~-!!Q2 1
p /S sm. NO.J ¡ ¡ ¡ INS. THK ·r

CLIP TYPE _j "R" ~ DIM
SUPP'T SERIAL NO.- (OUTSIDE RADIUS)
~--- ELEV. "E"
PLAN DWG. NO. - ~----- ORIENTATION

~------- DIM "A" PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1211 HANGER HC-1
(UNDER CONCRETE) AO
-:::o:-::·::o·:-)
··::::::::::::::: IZI
CLEVIS BRACKET
(CLS)
TURN BUCKLE
(TBL) 8
OCl
EYE BOLT 8 X
1----+- <
(EBTL) 1----+-ó
CLEVIS BOLT EYE BOLT CLEVIS BOLT
CLEVIS BRACKET ~ (CLB) (EBTL) (CLB)
(CLS) N
ELBOW LUG
(EL)
w
LUG PLATE
_fü:.T)__
PIPE SIZE "p"
TYPE-A TYPE-B PIPE SIZE "p"

(10" & LARGER) (8" & SMALLER)
TYPE-C TYPE-D
UNIT (mm)
PIPE SIZE ROO SIZE ALLOW.LOAD
E G J a (Kg)
NPS "p" (inch)
1/2" 3/8" 50 - 61 6 275
3/4" 3/8" 50 - 64 6 275
1· 3/8" 50 - 67 6 275
1-1/2" 3/8" 50 - 74 6 275 1. MATERIAL
-
- LUG PLATE/CLEVIS BRACKET: SAME AS RUN PIPE OR MAT'L TABLE.
2" 3/8" 50 80 6 275
3• 1/2" 50 175 95 6 515 CODE RUN PIPE LUG PLATE CLEVIS BRACKET
5/8" 200 107 6 820 K API 5l GR.8, A106 GR.B A283 GR.C OR EQ.
4" 50
y A335 P11 A387 GR.11 OR EQ.
6" 3/4" 50 250 135 6 1230
w A335 P22 A387 GR.22 OR EQ.
8" 1" 75 250 185 6 2250
X A312 TP304, TP316 A240-304 OR EQ.
10" 1-1/4" 75 300 212 6 3630 z A312 TP321 A240-321 OR EQ.
12" 1-1/4" 75 300 252 6 3630
14" 1-1/4" 90 300 268 6 3630 2. SEE DWG. NO. ST-M-1006/1007/1008/1010/1011/1013
16" 1-1/2" 90 300 294 9 5280 FOR THE DETAil OF HANGER ASSEMBLY.
18" 1-1/2" 90 300 319 9 5280
20· 1-3/4" 90 300 364 9 7120
24" 1-3/4" 90 300 415 9 7120
SYMBOL & CODING
~
( ¿ (
PIPE MAT'L ) 7 )
HC1~91 Zº°'
(IF REQ'D)
SUB-TYPE
SUpp'T SERIAL NO. ELEV. "F"
PLAN DWG. NO. --~ ~---- ELEV. "E" 1

PIPE SIZE "p" ~------ DIM "B"
1 i
PLAN ISO
REV.
(UNDER CONCRETE) AO
::<···<·:·::::::: ·::)
...................
·······:::::::::::::
.................... IZI
CLEVIS BRACKET
(CLS)
TURN BUCKLE
(TBL) oo
~
o
EYE BOLT o x
<(
(EBTL) 2.. EYE BOL T EYE BOLT
(EBTL) ~
o
PIPE CLAMP
PIPE CLAMP "'
N
PCC
(PC)
PIPE SIZE "p"
-'
*-'~~l
]_ ILIV.
------------
•r
PIPE CLAMP
PIPE SIZE "p"
(PCH) CRADLE THK "H"
TYPE-! TYPE-B (CRD)
TYPl-C
UNIT (mm)
PIPE SIZE ROO SIZE y ALLOW.LOAD
E F L a
NPS "p" (inch) (Kg)
1/2" 3/8" 50 100 35 6 275
3/4" 3/8" 50 100 35 6 275
1· 3/8" 50 110 35 6 275
1-1/2" 3/8" 50 135 50 6 275
2· 3/8" 50 145 55 6 275
3• 1/2" 50 <D 165 75 6 515 1. MATERIAL
4• 5
5/8" 50 195 95 6 820 - CLAMP, BOL T/NUT
1
....
6" 3/4'' 50 <( 260 140 6 1230 CODE RUN PIPE CLAMP BOLT & NUT
1
1· >-
8" 75 (/)
300 165 6 2250 K APl-5L GR.B, A106 GR.B A283 GR. C OR EQ. A307 GR.B OR EQ.
w
10" 1-1/4" 75 w
(/) 345 205 6 3630 y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H
12· 1-1/4" 75 370 230 6 3630 w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
14" 1-1/4" 90 420 260
6 3630
16" 1-1/2" 90 445 285 9 5280
18" 1-1/2" 90 470 310 9 5280
20" 1-3/4" 90 520 350 9 7120 2. SEE DWG. NO. ST-M-1006/1007/1008/1010/1011/1013
24" 1-3/4" 90 580 400 9 7120 FOR THE DETAil OF HANGER ASSEMBLY.
3. SEE DWG. NO. ST-AH 019 FOR CRADLE( CRD) THK 'H"
SYMBOL & CODING
/ (
CLAMP MAT'L 7 )
HC11~9
SUB-TYPE
CRADDLE
SUPP'T SERIAL NO. (THK ''H")
PLAN DWG. NO. --~ (IF REQ'D) j
~--- ELEV. "F"
PIPE SIZE "p" ~----- ELEV. "E"
~------ DIM "B" PLAN ISO
- - · · - - - - - - - - - - - - - - - - - - -- --------~--- -----------~ ---

REV.
(TRUNNION TYPE, UNDER CONCRETE) AO
!IBV. "I"
............................ ) ....................¡
CLEVIS BRACKET
(CLS)
TURN BUCKLE o
o
(TBL) ~
x
o < EYE BOLT
EYE BOLT
s :::;¡
(EBTL)
(EBTL) PIPE CLAMP
(PCC)
PIPE CLAMP .,.,
o
N
(PC)
TRUNNION "Q"
_J
!IBV. "F"
TRUNNION "Q" TRUNNION "Q"
PIPE CLAMP CRADLE CRD

(PC) THK "H"=50
PIPE SIZE "p" PIPE SIZE "p" 1
'o' EQUALS THE
TRUNNION WALL a
TYPB-A TH'K TYPB-B
1. MATERIAL
- TRUNNION : SAME AS RUN PIPE OR MA fL TABLE.
CODE RUN PIPE TRUNNION
UNIT (mm)
K API 5L GR.B, A106 GR.B API 5L GR.8 OR EQ.
y A335 P11 OR EQ. PIPE SIZE TRUNNION ROO SIZE E F L ALLOW. LOAD
A335 P11
NPS "p" NPS "Q" (inch) (Ka)
w A335 P22 A335 P22 OR EQ.
1-1/2" 1' 3/8" 50 105 35 275
X A312 TP304, TP316 A312 TP304 OR EQ.
2" 1-1/2" 3/8" 105 50 275
z A312 TP321 A312 TP321 OR EQ.
3• 3/8" 120
2" 55 275
- CLAMP, BOLT/NUT 2·
4" 1/2" 120 55 515
CODE RUN PIPE CLAMP BOLT & NUT 6" 4• 5/8" 150 95 820
K APl-5L GR.8, A106 GR.B A283 GR. C OR EQ. A307 GR.B OR EQ. 8" 4• 5/8" 150 95 820
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H 10" 6" 3/4" 65 190 140 1230
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H 12· 8" 1· 75 220 165 2250
X A312 TP304, TP316 A240 TP304 OR EQ. A193-87 /A194-2H 14" 8" 1· 220 165 2250
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H 16" 10" 1-1/4" 270 205 3630
2. SEE DWG. NO. ST-M-1006/1010/1013/1014/1016 18" 10" 1-1/4" 270 205 3630
FOR THE DA TEil OF HANGER ASSEMBL Y. 20· 12" 1-1/4" 290 230 3630
3. SEE DWG. NO. ST-M-0004 24" 12· 1-1/4" 290 230 3630
4. SEE DWG. NO. ST- M-1346
FOR THE DETAil OF TRUNNION.
FOR THE DETAil OF CRADLE.
SYMBOL & CODING
SUB-TYPE CLAMP MAT'L

SUPP'T SERIAL NO. REINF.PAD
(IF REQ'D)
PLAN DWG. NO. --~
PIPE MAT'L
PIPE SIZE "p" ---~ ' - - - - ELEV. "F"
e____ _ _ _ ELEV. "E"
DIM "A"
DIM "8" '------- P&'.~~tHºN PLAN ISO
. - --- --------- ---------------·------- - - - - - - - - - - - - - - - -

REV.
HANGER HC-31
(TRUNNION TYPE, UNDER CONCRETE) AO
ILIV. T
CLEV1S BRACKET EYE BOLT

(CLS) (EBTR)
EYE BOLT
(EBTR)
o
o
o ~
o
TURN
BUCKLE
(TBL)
EYE BOLT
(EBTL)
EYE BOLT
EBTL PIPE CLAMP
ILIV. •p• ~--~e-e~--

TRUNNION ·a· TRUNNION " •
PIPE CLAMP CRADLE(CRD)
(PC) THK "H"=50 A
PIPE SIZE •p•
NOTE
TYPl-A TYPl-B
1. MATERIAL
- TRUNNION · SAME AS RUN PIPE OR MAT'L TABLE.
K API 5L GR.8, A106 GR.8 API 5L GR.8 OR EQ. UNIT (mm)
y A335 P11 A335 P11 OR EQ.
PIPE SIZE TRUNNION ROO SIZE ALLOW.
w A335 P22 A335 P22 OR EQ. E F o
NPS "p" NPS "Q" (inch) LOAD (Kg)
X A312 TP304, TP316 A312 TP304 OR EQ.
1-1/2" 1· 3/8" 50 105 35 6 500
z A312 TP321 A312 TP 321 OR EQ.
2· 1-1/2" 3/8" 120 50 6 500
- CLAMP BOLT /NUT
3" 2" 3 8" 120 55 6 500
4• 2" 1/2" 120 55 6 800
K APl-5L GR.8, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ. 4•
6" 5/8" 150 95 6 1300
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194 2H
8" 4• 3/4" 150 95 6 2000
w A335 P22 A387 GR. 22 OR EQ. A193-87 /A194 2H
X
z
A312 TP304, TP316
A312 TP321
A240 TP304 OR EQ. A193-87 /A194-2H
A240 TP321 OR EQ. A193 87 /A194 2H
10·
12·
6"
8"
,.
3/4" 65
75
190
220
140
165
6
6
2000
3500
14" 8" 1" 220 165 6 3500
2. SEE DWG. NO. ST-M-1006/1010/1013/1014/1016 1-1/4'
16" 10' 270 205 9 5500
FOR THE DA TEil OF HANGER ASSEMBL Y.
18" 10· 1-1/4" 270 205 9 5500
FOR APPLICA TION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS. 20" 12" 1-1/2" 290 230 9 8000
4. SEE DWG. NO. ST -A4-1346 24" 12· 1-1/2" 290 230 g 8000
FOR THE DETAIL OF TRUNNION.
FOR THE DETAIL OF CRADLE.
SYMBOL & CODING
P/S STO. NO. CLAMP MAT'L

SUB- TYPE REINF.PAD(IF REQ'D)
SUPP'T SERIAL NO. TRUNNION MATERIAL
PLAN DWG. NO.--~ '----ELEV. "F"
PIPE SIZE "p" ' - - - - - - - - - ELEV "E"
DIM "A"
' - - - - - - - - QRIENTATION
DIM "B" (DEGREE) PLAN ISO
- - - - -- -------
REV.
HANGER HC-61
(FOR MUL 11 PIPES UNDER CONCRETE) AO
ll.IV. , . NOTE
1. SEE DWG. NO. ST-M-1006/1010/1012/1027 FOR 111E DETAil

OF HANGER ASSEMBL Y.
EXISTING INSER 2. SEE DWG. NO. ST-A4-0001 FOR 111E SIZE OF SHAPE STEEL.
PLATE
CLEV1S BRACKET
(CLS)
oo
CX)
PLAIN
WASHER
EYE BOLT (PW)
~
MEMBER "M"
ll.IV. .,...
A 75 lt 6 RIB STRAIGHT BOLT

PLAIN
EXISTING INSERT (STB)
WASHER 15
(PW) (MAX. 00)""' EQUIVALENT PIPE SIZE "Pe" PLATE
Pe=/P,'+ P,'+ -- TYPl-B

(8" & SMALLER)
ll.IV. ·r
EXISTING INSERT 150 150

PLATE
l TYPl!-C
l STRAIGHT BOLT
(STB)
(8" & SMALLER)
UNIT (mm)
EQUIVALENT ROD SIZE A MEMBER ALLOWABLE EQUIVALENT ROO SIZE A MEMBER ALLOWABLE
a E a E
PIPE SIZE 'Pe' (in ch) (max) "M" LOAD (Kg) PIPE SIZE "Pe' (inch) (max) "M" LOAD (Kg)
1/2"N2tt 3/8" 6 50 500 AS 400 500 C10 4500
12" 1-1/4" 6 75
3• 1/2" 6 50 500 A6 750 1000 C12 4100
500 A6 750 500 C10 4500
4" 5/8" 6 50 14" 1-1/4" 6 90
1000 A7 700 1000 C12 4100
500 A7 1400 1000 C12 4100
6" 3/4" 6 50 16" 1-1/4" 6 90
1000 A10 1400 1500 C15 4000
500 A10 2900 1000 C15 6900
8" 1· 6 75 18" 1-1/2" 9 90
1000 C10 2200 SEE HC-64
500 A10 2900 1000 C15 6900
10· 1" 6 75 20· 1-1/2" 9 90
1000 C10 2200 SEE HC-64
SYMBOL & CODING
P/S STD. NO.

SUB-TYPE
ss;y1
HjA-000 • 1
SUPP'T SERIAL NO. (INDICATE 'MTH
~-----DIM "A"
PLAN DWG. NO. LARGEST UNE)
EQV.PIPE SIZE "Pe"
PLAN ISO
----- ·- ------ - ------··----- - - -

PIPING SUPPORT STANDARD DWG. ST-A4-1216 HANGER HC-64 REV.
(FOR MUL TI PIPES UNDER CONCRETE) AO
EXISTING INSERT
PLATE
CLEVIS BRACKET
(CLS)
EYE BOLT
(EBTR)
TURN BUCKLE
(TBL)
EYE BOLT o
~
u')
"'
MEMBER "M"
ILIV. "1"
fl 6 RIB
(MAX. 1500)""" EQUIVALENT PIPE SIZE "Pe"

Pe=/P.'+ P.'+ --
UNIT (mm)
EQUIVALENT ROO SIZE A MEMBER ALLOWABLE
a E "M"
PIPE SIZE 'Pe' (in ch) (max) LOAD (Kg)
1000 SEE HC-61

18" 1-1/2" 9 90 1500 H15 7500
2000 H20 9300
NOTE
1000 SEE HC-61
L SEE DWG. NO. ST-M-1006/1010/1013 20" 1-1/2" 9 90 1500 H15 7500
FOR THE DETAil OF HANGER ASSEMBLY. 2000 H20 9300
1000 H12 8200
2. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF 24" 1-1/2" 9 90 1500 H15 7500
SHAPE STEEL. 2000 H20 9300
SYMBOL & CODING
$~
~
~---- DIM "B" (INDICA TE '11111-1
PLAN DWG. NO.
LARGEST UNE)
~------DIM "A"
EQV.PIPE SIZE "Pe" ---~ PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1221 HANGER HS-1
(UNDER S1RUCTURE) AO
EXISTING BEAM
CLEVIS BRACKET
(CLS)
TURN BUCKLE
(TBL)
oo
ro
EYE BOLT X 8
1---+<
(EBTL) 1---+~
CLEVIS BRACKET o (CLB) (EBTL) (CLB)
(CLS) "'
N
w
LUG PLATE
___ _(tp_TI__
PIPE SIZE "p"
TYPE-! TYPE-B PIPE SIZE "p"

TYPE-C TYPE-D
UNIT (mm)
PIPE SIZE ROO SIZE ALLOW.
E G J a
NPS "p" (in ch) LOAD (Kg)
1/2" 3/8" 50 - 61 6 275
3/4" 3/8" 50 - 63 6 275
r 3/8" 50 - 67 6 275
1-1;2· 3/8" 50 - 74 6 275 1. MATERIAL
2" 3/8" 50 - 80 6 275
- LUG PLA TE / CLE'v1S BRACKET : SAME AS RUN PIPE OR MA T'L TABLE.
3• 1/2" 50 175 95 6 515
4" 5/8" 50 200 107 6 820 CODE RUN PIPE LUG PLA TE/CLEVIS BRACKET
5• 3/4" 50 250 134 6 1230 K API 5L GR.B, A106 GR.B A283 GR.C OR EQ.
8" r 75 250 185 6 2250 y A335 P11 A387 GR.11 OR EQ.
10" 1-1/4" 75 300 212 6 3630 w A335 P22 A387 GR.22 OR EQ.
12" 1-1/4" 75 300 237 6 3630 X A312 TP304, TP316 A240-304 OR EQ.
14" 1-1/4" 75 300 253 6 3630 z A312 TP321 A240-321 OR EQ.
16" 1-1/2" 90 300 294 9 5280
18" 1-1/2" 90 300 319 9 5280 2. SEE DWG. NO. ST-A4-1006/1007 /1008/1010/1011/1013/1015/1016
20· 1-3/4" 90 FOR THE DETAIL OF HANGER ASSEMBLY.
300 345 9 7120
24" 1-3/4" 90 300 396 9 7120
SYMBOL & CODING
P/S SID. NO. PIPE MAT'L (

) 7
¿ )
IHS1C~
(IF REQ'D)
SUB-TYPE
SUPP'T SERIAL NO. ELEV. "F"
PLAN DWG. NO. --~ ~---ELEV. "E" 1
PIPE SIZE "p" ~----- DIM "B"

PLAN ISO
--------------------------~---------- ---- -~--------------------

REV.
(UNDER STRUCTURE) AO
19V. "I"
EXISTING BEAM
EYE BOLT
(EBTR)
:e

CLEVIS BRACKET (CLB) (EBTR) (CLB)
(CLS)
--,, LUG PLATE

~___,_'r__ ___l----"4'.';-'A- - - - ____ _J_L.f'_!L
TYPl-A TYPl-B PIPE SIZE "p"

TYPl-C TYPl-D
UNIT (mm)
PIPE SIZE ROO SIZE ALLOW.LOAD
E G J a
NPS "p" (inch) (Kg)
1/2" 3/8" 50 - 61 6 275
3/4" 3/8" 50 - 64 6 275
1· 3/8" 50 - 67 6 275
1-1/2" 3/8" 50 - 74 6 275
-
1. MATERIAL
2" 3/8" 50 80 6 275
3" 1/2" 50 175 - LUG PLA TE / CLEIAS BRACKET : SAME AS RUN PIPE OR MA T'L TABLE.
95 6 515
4• 5/8" 50 200 107 6 820 CODE RUN PIPE LUG PLATE
K API 5L GR.B A106 GR.B A283 GR.C OR EQ.
6" 3/4" 50 250 135 6 1230
y A335 P11 A387 GR.11 OR EQ.
8" 1" 75 250 185 6 2250
w A335 P22 A387 GR.22 OR EQ.
10· 1-1/4" 75 300 212 6 3630 A240-304 OR EQ.
X A312 TP304, TP316
12" 1-1/4" 75 300 252 6 3630 zA312 TP321 A240-321 OR EQ.
14" 1-1/4" 90 300 268 6 3630
2. COORDINATION 'MTI1 TI1E STRUCTURAL OEPARTMENT IS REQUIRED
16" 1-1/2" 90 300 294 9 5280 FOR Tl-IE ADDITION OF A STEEL ATTACHMENT.
18" 1-1/2" 90 300 319 9 5280
3. SEE DWG. NO. ST-M-1006/1007 /1008/1010/1011
20" 1-3/4" 90 300 364 9 7120 FOR THE DETAIL OF HANGER ASSEMBL Y.
24" 1-3/4" 90 300 415 9 7120
SYMBOL & CODING
~
(
P/S SID. NO. PIPE MAT'L ¿_ )
jHs~~I llom!
)
(IF REQ'D)
SUB-TYPE
ELEV. "F"
SUPP'T SERIAL NO. ELEV. "E"

PLAN DWG. NO. PIPE SIZE "p"
PLAN ISO
REV.
CLEVlS BRACKET
(CLS)
TURN BUCKLE
(TBL) so
~
a
EYE BOLT S' x
<(
(EBTL) 2.- EYE BOLT
a
~
PIPE CLAMP
PIPE CLAMP "'
N
PCC
(PC)
-'
-----tt-'~Afl _____ ::;~~-=--
PIPE CLAMP
PIPE SIZE "p"
(CRD)
TYPE-A TYPE-B TYPE-C
UNIT lmm)
PIPE SIZE ROO SIZE y
ALLOW.
E F L a
1/2" 3/8" 50 100 35 6 275
3/4" 3/8" 50 100 35 6 275
1'' 3/8" 50 110 35 6 275
1-1/2" 3/8" 50 135 50 6 275 1. MATERIAL
2· 3/8" 50 145 55 6 275 - CLAMP, BOLT/NUT
<C>
3• 1/2" 50 o 165 75 6 515 CODE RUN PIPE CLAMP BOLT & NUT
4" 5/8" 50
1
.... 195 95 6 820
<(
6" 3/4" 50 >-
1 260 140 6 1230 y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
(./')
8" 1" 75 w 300 165 6 2250 w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
w
10" 1-1/4" 75 (./')
345 205 6 3630 X A312 TP304, TP316 A240 TP304 OR EQ. A193-87 /A194-2H
12" 1-1/4" 75 370 230 6 3630 z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
14" 1-1/4" 75 420 260 6 3630
16" 1-1/2" 90 445 285 9 5280
18" 1-1/2" 90 470 310 9 5280 2. SEE DWG. NO. ST-M-1006/1007 /1008/1010/1011/1013/1015/1016
20" 1-3/4" 90 520 350 9 7120 FOR THE DET AIL OF HANGER ASSEMBLY.
24" 1-3/4" 90 580 400 9 7120 3. SEE DWG. NO. ST-A4-1019 FOR CRADLE( CRD) THK "H"
SYMBOL & CODING
P/S SID. NO. CLAMP MAT'L ) 7

¿ (
)
yf
IHS11~ 1
(IF REQ'D)
SUB-TYPE
CRADDLE
SUPP'T SERIAL NO. ~THK"H")
IF REQ'D)
PLAN DWG. NO.
ELEV. "F"
IHZ0091
PIPE SIZE "p" ELEV. "E"
DIM "B" PLAN ISO
-- ------ ---·----------- - - - - - - - - - - - - - - - - - --- - - - - - · · - - - - --- - -------------·------- --- - - -- - - - - - - - -- ---··· - -- ---- -

REV.
PIPING SUPPORT STANDARD DWG. ST-M-1226 HANGER HS-13
ILIV. "!"
EXISTING BEAM
EYE BOLT
(EBTR)
PIPE CLAMP
PIPE CLAMP
-------H--'~M- l_ ___ -~:' --

(PC)
PIPE CLAMP
PIPE SIZE "p"
(CRD)
TYPI!-! TYPl!-B TYPl!-C
UNIT lmm)
PIPE SIZE ROO SIZE y ALLOW.
E F L a
1/2" 3/8" 50 100 35 6 275
1. MATERIAL
3/4" 3/8" 50 100 35 6 275
1" 3/8" 50 110 35 6 275 - CLAMP, BOLT/NUT
1-1/2" 3/8" 50 135 50 6 275 CODE RUN PIPE CLAMP BOLT & NUT
2· 3/8" 50 145 55 6 275 K APl-5L GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
<D
3" 1/2" 50 Ei 165 75 6 515 y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H
4" 5/8" 50 1
.... 195 95 6 820 w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
<(
6" 3/4" 50 1-
1 260 140 6 1230 X A312 TP304, TP316 A240 TP304 OR EQ. A193-87 /A194-2H
8" 1" 75
U'l
w 300 165 6 2250 z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
w
10" 1-1/4" 75 U'l 345 205 6 3630 - OTHER PARTS : A36 OR EQ.
12" 1-1/4" 75 370 230 6 3630
14" 1-1/4" 75 420 260 6 3630 2. SEE DWG. NO. ST-A4-1006/1007 /1008/1010/1011/1013/1015/1016
FOR THE DETAil OF HANGER ASSEMBLY.
16" 1-1/2" 90 445 285 9 5280
18" 1-1/2" 90 470 310 9 5280 3. SEE DWG. NO. ST-A4-1019 FOR CRADLE(CRD) THK "H"
20" 1-3/4" 90 520 350 9 7120 4. COORDINAllON 'MTH THE STRUCTURE DEPARTMENT IS
24" 1-3/4" 90 580 400 9 7120 REQUIRED FOR THE ADDITION OF A STEEL ATTACHMENT.
SYMBOL & CODING
P/S sm.
SUB-TYPE
NO. \:LAMP MAT'L
(IF REQ'D)
CRADDLE
(
) ?\ ) ¿ (
SUPP'T SERIAL NO. (THK"H")

PLAN DWG. NO. - - - - - '
PIPE SIZE "p" - - - - - - - ' ~-----
~---
(IF REO'D)
ELEV. "F"
ELEV. "E"
E
PLAN ISO
· - - - - - - - - - · - - - - - - - - - - - - - - - - - - - - · - - - - - · - - - - · - - - - --·- - - - - - - - - - - - · - - - · - - · - - - - - - - - - · - - - -
REV.
HANGER HS-21
(TRUNNION TYPE, UNDER STRUCTURE) AO
EXISTING BEAM
CLEVIS BRACKET
(CLS) LT
TURN BUCKLE o
o
(TBL) co
x
o < EYE BOLT
o ::::.
(EBTL)
PIPE CLAMP
(PCC)
11.EV. .,.
PIPE C AMP CRADLE CRD

(PC) THK "H"=50
'a' EQUALS THE
TRUNNION WALL o
NOTE TH'K
1. MATERIAL
- TRUNNION : SAME AS RUN PIPE OR MAT'L TABLE.
y A335 P11 A335 Pl 1 OR EQ. UNIT (mm\
PIPE SIZE TRUNNION ROO SIZE ALLOW.
w A335 P22 A335 P22 OR EQ.
NPS •p• NPS "Q" (inch)
E F L
LOAD (Kq)
X A312 TP304, TP316 A312 TP 304 OR EQ.
1-1/2" 1· 3/8" 50 105 35 275
z A312 TP321 A312 TP321 OR EQ.
2" 3/8" 105 50 275
1-1 /2"
- CLAMP, BOLT/NUT
3• 2" 3/8" 120 55 275
4• 2" 1/2" 120 55 515
6" 4" 5/8" 150 95 820
y A335 Pll A387 GR.11 OR EQ. A193-87 /A194-2H
8" 4" 5/8" 150 95 820
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
10· 6" 3/4" 65 190 140 1230
12· 8" 1· 75 220 165 2250
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
1· 220 2250
14" 8" 165
2. SEE DWG. NO. ST-M-1006/1010/1013/1014/1016
16" 10· 1-1/4" 270 205 3630
FOR THE DETAil OF HANGER ASSEMBL Y.
3. SEE DWG. NO. ST-M-0004 18" 10· 1-1/4" 270 205 3630
FOR APPLICA TION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS. 20· 12· 1-1/4" 290 230 3630
4. SEE DWG. NO. ST-M-1346 FOR THE DETAil OF TRUNNION. 24" 12· 1-1/4" 290 230 3630
5. SEE DWG. NO. ST-M-1019 FOR THE DETAil OF CRADLE.
SYMBOL & CODING
CLAMP MAT'L
REINF.PAD
SUPP'T SERIAL NO. (IF REQ'D)
PLAN DWG. NO.--- PIPE MATL
PIPE SIZE "p" - - - - ~--ELEV. "F"

DIM "A" ~---- ELEV. "E"
DIM "8" QRIENTAJION
(DEGREEJ PLAN ISO
·----·-------
REV.
HANGER HS-31
(TRUNNION TYPE, UNDER STRUCTURE) AO
EXISTING BEAM
ILIV "I•
CLEVIS BRACKET EYE BOLT

(CLS) EBTR
EYE BOLT
o
~
o
00
o
o
TURN
BUCKLE
(TBL)
EYE BOLT
(EBTL)
EYE BOLT 1
PIPE CLAMP
(EBTL) 1
(PCC)
'
ILIV. T 1
-~-
1
' TRUNNION "Q" TRUNNION "Q"
'
1
PIPE CLAMP CRADLE( CRD)
100. I 1 (PC) THK "H"=50
NOTE TYPE-A TYPE-B

1. MATERIAL
- TRUNNION : SAME AS RUN PIPE OR MA T'L TABLE.
y A335 P11 A335 P11 OR EQ.
UNIT (mm)
w A335 P22 A335 P22 OR EQ.
X A312 TP304, TP316 A312 TP304 OR EQ. PIPE SIZE TRUNNION ROO SIZE E F ALLOW.
L a
NPS "p" NPS "Q" linch) LOAD /Ka)
z A312 TP321 A312 TP321 OR EQ.
1"
1-1/2" 3/8" 50 105 35 6 500
- CLAMP, BOLT/NUT
2" 1-1/2" 3/8" 120 50 6 500
3" 2" 3/8" 120 55 6 500
y A335 P11 4" 2" 1/2" 120 55 6 800
A387 GR.11 OR EQ. A193-B7 /A194-2H
6" 4" 5/8" 150 95 6 1300
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
4•
8" 3/4" 150 95 6 2000
10· 6" 3/4" 65 190 140 6 2000
zA312 TP321 A240 TP321 OR EQ. A193-B7 /A194-2H
1" 75
12" 8" 220 165 6 3500
2. SEE DWG. NO. ST-M-1006/1010/1013/1014/1016
14" 8" 1" 220 165 6 3500
FOR THE DETAil OF HANGER ASSEMBL Y.
3. SEE DWG. NO. ST-M-0004 16" 10" 1-1/4" 270 205 9 5500
FOR APPUCA TION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS. 18" 10· 1-1/4" 270 205 9 5500
4. SEE DWG. NO. ST-M-1346 FOR THE DETAil OF TRUNNION. 20" 1r 1-1/2" 290 230 9 8000
5. SEE DWG. NO. ST-M-1019 FOR THE DETAil OF CRADLE. 24" 12" 1-1/2" 290 230 9 8000
SYMBOL & CODING
P/S STO. NO. CLAMP MAT'L

SUB-TYPE REINF.PAD(IF REQ'D)
SUPP'T SERIAL NO. PIPE MATERIAL
PLAN DWG. NO.--~ ' - - - - - ELEV. "F"
PIPE SIZE "p" ' - - - - - - - ELEV "E"
DIM "A" QRIENT ATION
DIM "8" (DEGREE) PLAN ISO
· - - - -------------·------------ ---
REV.
HANGER HS-51
(W/MOTHER PIPE, TRUNNION TYPE) AO
MOTBIR PIPI SIZI "1'1•

(SEE NOTE 2)
EYE BOLT
EBTR
TURN
BUCKLE
(TBL) EYE BOLT EYE BOLT
(EBTL) ~
PIPE CLAMP
PIPE CLAMP
PCC
{PC)
::.__~--_,~1.LL.<cn_--'-------U-:!'"';¡.¡l __________ ~:;lz:F;~-

_El.IV
__
PIPE CLAMP
(CRD)
TYPl-C
UNIT lmm)
1. MATERIAL
PIPE SIZE ROO SIZE F L y ALLOW.
- CLAMP, BOLT/NUT
NPS "p" linch) LOAD IKa)
1-112· 3/8" 35 135 500 CODE TEMP. CLAMP BOLT & NUT
2· 3/8" 50 145 500 K N350'C A283 GR.C OR EQ. A307 GR.B
3• 3/8" 55 165 500 L N420ºC A516 GR.60 OR EQ. A193 GR.87 /A194 2H
4• 1/2" 55 195 800 y
<D N640ºC A387 GR.11 OR EQ. A193 GR.87 /A194 2H
5• 5/8" 5 95 260 1300
8" 3/4" ...-1
<(
95 300 2000 2. UPPER UNE SHALL BE UNINSULA TED ANO
10· 3/4" 1 140 345 2000 OPERA TED AT 95ºC OR BELOW
f-
UJ
12· 1· 165 370 3500
w 3. THE USE OF THIS HANGER TYPE REQUIRES APPROVAL
1· w
14" UJ 165 420 3500 OF STRESS ENGINEER.
16" 1-1/4" 205 445 5500
18" 1-1/4" 205 470 4. SEE DWG. NO. ST-M-1010/1013/1014/1016
5500
20· 1-1/2" 230 520 8000
24" 1-1/2" 230 580 8000 5. SEE DWG. NO. ST-A4-1019 FOR THE DETAil OF CRADLE.
SYMBOL & CODING
~
¿_ (
P/S STO. NO. REINF.PAD(IF REQ'D) 7 )
IHss1~j
SUB-TYPE CRAD,D.~~
SUPP'T SERIAL NO. rirF REQ'D)
H
PLAN DWG. NO.
PIPE SIZE •p•
ELEV. "F"
ELEV T
1Z-0091
PIPE "p1•
PLAN ISO
HOLD DOWNS H D- 1 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1241 (FOR BARE OR HOT INSULA TED PIPE
W/VIBRAT/ON) AO
/ BOLT/NUT "d~"
PLAIN WASHER
(PW)
COMPRESSION WASHER
BOLT HOLE "d1~·
PIPE SIZE "p"
L75x75x9
N
_J
--------~~~~!¡!~-----------
RF-1
8-COMPRESSION WASHERS
3" & SMALLER
UNIT (mm)
PIPE SIZE MEMBER "L" STUD BOLT/NUT PLAIN WASHER COMPRESSION WASHER ALLOW.
NPS "p" L d1~ Q'TY d~ L1 L2 Q'TY Q'TY TYPE LOAD Q'TY LOAD(Kg)
3/4" 130 11 2 3/8" 95 85 1EAx2
1" 135 11 2 3/8" 100 90 1EAx2
JIS B2706
1-1/2" 150 11 2 3/8" 120 105 1EAx2 1EA 175 Kg 8EA 700
N0.10
2· 160 11 2 3/8" 130 115 1EAx2 OR EQ.
3• 190 11 2 3/8" 155 145 1EAx2
1. MATERIAL
SHAPE STEEL : A36 OR EQ.
BOLT/NUT : A193-B7 /A194-2H GALVANIZED W1TH SELF LOCKING NUT
2. COMPRESSION WASHER
STACK IN SERIES / PARALLEL ARRANGEMENT AS SHOWN
3. FIELD PROCEDURE FOR T/GHTENING BOL TS

1) T/GHTEN ALL NUTS BY HAND (FINGER T/GHT)
2) TURN NUT AT COMPRESSION WASHER 1/2 ADDIT/ONAL OR 180º
ACTUAL LOAD AT COMPRESSION WASHER : 175Kg
4. USE ONL Y W1TH CONFIRMING TO STRESS ENGINEER
5. IN SULA TOR W1LL NOT INSULA TE HOLD DOWN AREA.
SYMBOL & CODING
PLAN DWG. NO.
PLAN ISO
HOLD DOWNS HD- 2 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1242 (FOR BARE OR HOT INSULA TED PIPE AQ
W/1¡1BRATION)
COMPRESSION
WASHER
(SEE NOTE 1)
BOLT/NUT "di!"
BOLT/Hur "M ~ PLAIN WASHER PW
PIPE SIZE "p"

BOLT HOLE "d10"
N
_J
ROD SIZE 3 8"
....
. .d ..
.. ...
3" & UNDER
UNIT (mm)
PIPE SIZE MEMBER "[" STUD BOLT/NUT PLAIN WASHER COMPRESSION WASHER ALLOW.
NPS "p" L d10 Q'1Y di'! L1 L2 Q'TY Q'TY 1YPE LOAD Q'TY LOAD(Kg)
3/4" 200 11 1 3/8" 95 85 1EAx2
1• 200 11 1 3/8" 100 90 1EAx2 JIS B2706
1-1/2" 200 11 1 3/8" 120 105 1EAx2 1EA N0.10 175 Kg SEA 700
2" 220 11 1 3/8" 130 115 1EAx2 OR EQ.
3• 250 11 1 3/8" 155 145 1EAx2
NOTE
1. MATERIAL
BOLT/NUT : A193-B7 /A194-2H GALVANIZED 'MTH SELF LOCKING NUT.
3. FIELD PROCEDURE FOR TIGHTENING BOL TS

1) TIGHTEN ALL NUTS BY HAND (FINGER TIGHT)
2) TURN NUT AT COMPRESSION 1/2 ADDITIONAL TURNS OR 180"
ACTUAL LOAD AT COMPRESSION WASHER : 175Kg
4. SEE DWG NO. ST-M-1006 FOR THE DETAil OF CLEVlS.
5. INSULA TOR 'MLL NOT INSULATE HOLD DOWN AREA.
SYMBOL & CODING
P/S STD. NO. PIPE SIZE "p"
PLAN DWG. NO.
PLAN ISO
l __________________________ - --------------~-~--- -~---------·~-----------~--- - - - - - - - - - - - - - - - - - - - - - - - - · - - - - - - - - - - .


HOLD DOWNS HD-3 REV.
(FOR BARE OR HOT INSULA TED PIPE
W/VIBRATION) AO
BOLT HOLE "di&"

PLAIN WASHER PW
TYP.
4" - 10" 12" TO 18"

UNIT (mm)
PIPE SIZE "[" MEMBER BOLT/NUT PLAIN WASHER COMPRESSION WASHER ALLOW.
TYPE NPS •p• Q'TY Q'TY Q'TY LOAD(Kg)
L d1~ Q'TY d~ L1 L2 TYPE LOAD
4" 310 21 1 3/4" 140 115 1EAx2
JIS 82706
6" 360 21 1 3/4" 190 170 1EAx2 1EAx1 250 Kg 8EAX1 1000
NO, 20
TYPE 1 8" 415 21 1 3/4" 240 220 1EAx2 OR EQ.
10· 450 21 1 3/4" 300 275 1EAx2
12· 480 21 1 3/4" 345 325 1EAx2
JIS 82706
14" 510 21 1 3/4" 380 360 1EAx2 500 Kg 4EAX1 2000
TYPE :rr: 1EAx1 NO, 20
16" 560 21 1 3/4" 425 405 1EAx2 OR EQ.
18" 610 21 1 3/4" 480 460 1EAx2
NOTE
1. MATERIAL
BOLT/NUT : A193-B7 /A194-2H GALVANIZED WITH SELF LOCKING NUT.
3. FIELD PROCEDURE FOR TIGHTENING BOLTS
2) TURN NUT AT COMPRESSION 1/4 ADDITIONAL TURNS OR 90',
ACTUAL LOAD AT COMPRESSION WASHER : 250Kg FOR TYPE 1 ANO 500Kg FOR TYPE 11.
4. SEE DWG. NO. ST-M-1006 FOR THE DETAil OF CLEVJS.
5. USE ONLY 'W1TH APPROVAL FROM STRESS ENGINEER
6. INSULA TOR 'W1LL NOT IN SULA TE HOLD DOWN AREA.
SYMBOL & CODING
~
( ¿_ (
)
P/S STO. NO. PIPE SIZE "p"

~· ~
PLAN ISO
---·-------- ------ - -- --------·---- -------------·-·---------------- ---------------------- ---- ---- - - - - --

HOLD DOWNS H D- 4 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1244 (FOR BARE OR HOT INSULATED PIPE
W/VlBRATION) AO
1 CUT FROM H200x200x8x12

25 BLOT NUT "di!"
PIPE SIZE "p" 1 1/ BLOT NUT "di!"
=~= PLAIN WASHER PW
COMPRESSION WASHER
......_ BOLT HOLE "dW

CLEVIS FOR ROO SIZE 3 4"
(CLS)
50-100
t-.=~~==~~==~~~
1 frv--<rw.
·· .. ~
20" TO 36"
UNIT (mm)
PIPE SIZE CT H20 BOLT/NUT PLAIN WASHER COMPRESSION WASHER ALLOW.
NPS "p" L d19l Q'TY d9l L1 L2 Q'TY Q'TY TYPE LOAD Q'TY LOAD(Kg)
20" 660 21 1 3/4" 550 535 2EAx2
21 1 3/4" 650 635 2EAx2 JIS 82706
24" 760
1EAx2 NO, 20 500 Kg 4EAx2 4000
30" 915 21 1 3/4" 800 790 2EAx2 OR EQ.
36" 1065 21 1 3/4" 955 940 2EAx2
NOTE
1. MATERIAL
4. SEE DWG NO. ST-M-1006 FOR THE DETAil OF CLEV1S.
- BOLT/NUT: A197-B7/A194-2H GALVANIZED l'llTH SELF LOCKING NUT
- PIPE PAD : SAME AS RUN PIPE OR MA T'L TABLE. 5. USE ONL Y l'llTH CONFIRMING TO STRESS ENGINEER
CODE RUN PIPE PIPE PAD 6. INSULA TOR l'llLL NOT INSULA TE HOLD DOWN AREA.
K API 5L GR.8, A106 GR.8 A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
STACK IN SERIES / PARALLEL ARRANGEMENT AS SHOWN MARK
3. FIELD PROCEDURE FOR TIGHTENING BOLTS

2) TURN NUT AT COMPRESSION 1/4 ADDITIONAL TURNS OR 90·
ACTUAL LOAD AT COMPERSSION WASHER : 500Kg
SYMBOL & CODING
P/S STO. NO. PAD MAT'L
PLAN ISO
L---------------·--------------------------·--------------------- -------------- -- ------ -· --------

(./) fT1
--j (./)
)> ' l
z)>
HOLD DOWN SELECTION TABLE FOR COLO INSULATED PIPING lJ
-
DI
)>)>
( 1-1/2" TO 30'', -45°C & OVER) lJ :::oz
z o ;o
(INCH) 3/4 1 1/4 1 1/211 3/41 2 12 1/4 2 1/212 3/41 3 3 1/413 1/213 3/41 4 4 1/414 1/214 3/4 5 15 1/415 1/2 C) -u fT1
---ri
(./) -u-
f"Tlz
70 1 75 80 1 85 e (./);o
fT1
lJ
lJ C-<
2"
o
AJ
iSc
o-u
-----1 ;oGJ
3" --j ;o
(./) - )>
4" -----1 01º
)> mz
6" z OGJ
--J
8" o '--.._-u
)> 01:::0
10" + I+ +1 + + I+ AJ NO
12" ++l+l++I+ + I+ +I + I+ +I + + I+
o 1 e_
(./) fT1
14" + + I+ +I + \+ +I + +l++l+I++ o
:z:: ºº
(Jl
1 --j
16" (HD-3) + + 1+ +I
+ 1 + + + I+ ++ I+ +I + C)
-~1 ----~--"""+--+---;---+---+---;---1"-*-+-",._-"1-*--+',._-*-t-*--f"----+-...........'I--.--+...........-+----+---+--+---+---+--+---+---+--~ o
o
18" 20" + + I+ +I + I+ +I + + I+ +I + I+ +
1
Ul
20" --j
1
24" :t>
.j:>.
1
26" ~
N
28" .j:>.
(Jl
30"
P : PIPE SIZE , De : EQUIVALENT PIPE SIZE, T : COID INSVLATION TBICINISS

HO-TYPE : HOLD DOl'iNS TYPE FOR APPLICATION OF EQUIVALENT PIPE SIZE
NOTE CRADLE(CRD)
DENSITY OF COLO -:;:¡ :::r:
1. De : THIS DIM. TO BE O.O. EACH PIPE SIZE t 2 TIMES COLO INSULA TION THICKNESS.
( EX. 14" LINE WITH 3" COLO INSUL. = 20" De ) INSULATION : 500Kg/f.A3 COMPRESSION WASHER ºº
(") 'o
""
2. SPECIAL DESIGN : HOLD DOWNS FOR COLO IN SULA TION NEED APPROVAL FROM STRESS ENGINEER. o
5 o
3. FOR APPLICA TION TEMPERA TURES OF -46' C & BELOW -z ::E
o
CONSUL T IN SULA TION ENGINEER ~ :z
4. SEE DWG. NO. ST-A4-1243 FOR THE DETAil OF HD-3 5. SEE DWG. NO. ST -A4-1104 FOR THE DETAil OF CRADLE. i;: U)
SEE DWG. NO. ST-M-1244 FOR THE DETAil OF HD-4 8
SYMBOL & CODING -1(")
"1:1
;i:j :r:
~~
d
~o
~
"'º
z •
,....,,....,
HD5-13001-16"-T100
~I
( / (
~) ~· T"I ~~
=F =T= T =F
~ (J1
P/S STO. NO.
INS. THK. "T" > ,....,,......... 1 1 IJ 1
ll
)
o
3
PLAN DWG. NO. - - - - ' :t> AJ
~-- PIPE SIZE "p" o rl
PLAN ISO ~

HOLD DOWNS HD-6 REV.
(FOR INSULA1ED PIPE W/\11BRATION) AO
L
BOLT HOLE "df6"
~ PLAIN WASHER PW
COMPRESSION WASHER
PIPE SIZE "p"
N
_J
TYP.
12" - 18"
TYP.
4" - 10"
4-COMPRESSION WASHERS 1
4" - 10" 12" - 18"
UNIT (mm)
PIPE SIZE "[" MEMBER BOLT/NUT PLAIN WASHER COMPRESSION WASHER ALLOW.
TYPE NPS "p" Q'TY Q'TY Q'TY LOAD(Kg)
L d1(6 Q'TY di<\ Ll L2 TYPE LOAD
4" 310 21 1 3/4" 240 215 1EAx2
JIS 82706
6" 360 21 1 3/4" 290 270 1EAx2 1EAx1 250 Kg 8EAX1 1000
NO, 20
TYPE I 8" 415 21 1 3/4" 340 320 1EAx2 OR EQ.
10· 450 21 1 3/4" 400 375 1EAx2
12" 480 21 1 3/4" 445 425 1EAx2
JIS 82706
14" 510 21 1 3/4" 480 460 1EAx2 500 Kg 4EAX1 2000
TYPE :n: 16" 560 21 1 3/4" 525 505 1EAx2
1EAx1 NO, 20
OR EO.
18" 610 21 1 3/4" 580 560 1EAx2
1. MA1ERIAL 4. SEE DWG. NO. ST-M-1006 FOR THE DETAil OF CLE\11S.

SHAPE STEEL : A36 OR EQ. 5. SEE DWG. NO. ST-M-1107 FOR THE DETAil OF SHOE.
BOLT/NUT : A193-B7 /A194-2H GALVANIZED WITH SELF LOCKING NUT.
6. INSULA TOR 'MLL NOT IN SULA TE HOLD DOWN AREA.
3. FIELD PROCEOURE FOR TIGH1ENING BOL TS
1) TIGH1EN ALL NUTS BY HAND (FINGER TIGHT)
2) TURN NUT AT COMPRESSION 1/4 ADDITIONAL TURNS OR 90',
ACTUAL LOAD AT COMPRESSION WASHER : 250Kg FOR TYPE 1 AND 500Kg FOR TYPE 11.
SYMBOL & CODING

PLAN DWG. NO. - - - - - - - '
PLAN ISO
REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1246 (2/2) HOLD DOWNS HD-11
(FOR V1BRA TION UNES, FIXED BAND TYPE) AO
PIPE SIZE "p"
• '-i /AT '-i /AT

1 ~ENDS ' ~ENDS
'\EXJSTING STEEL ,\ EXISTING STEEL
1
FIXED BAND
(FBDS)
PIPE SIZE "p"
.....
....... : ,;.,· "'
RF-1 RF-1 RF-1
1. USE ONLY WITH CONFIRMING TO STRESS ENGINEER.
2. INSULA TOR WILL NOT IN SULA TE HOLD DO'M-1 AREA.

3. SEE DWG. NO. ST-A4-1025 FOR THE DETAil OF FIXED BAND(FBDS)
SYMBOL & CODING
HD11-13001-4"
PLAN DWG. NO.
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1247 HOLD DOWNS HD-12
(FOR \11BRATION UNES, FIXED BAND TYPE) AÜ
PIPE SIZE "p"
J \.~ ,AT
' 6vso<-ENDS
, \EXISTING STEEL
1
PIPE SIZE "p"
·.·~·- s&. •"". ' .

~ ..
'4 "'· ·.•. . . .ii ..

·" . ~; .
1
1. USE ONL Y WITH CONFIRMING TO STRESS ENGINEER.

2. INSULA TOR WILL NOT IN SULA TE HOLD DO'WN AREA.
3. SEE DWG. NO. ST-M-1024 FOR THE DETAil ANO ALLOWABLE LOAD OF FIXED BAND(FBD)
SYMBOL & CODING
HD12-13001-24"
/ (
PLAN DWG. NO.

PIPE SIZE "p"
l~)
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1251 GU SSET SUPPORT p S- 1
(FOR ANGLE VAL VE) AO
A+ D/2
<
FB-25x6 FOR 1-1/2" & SMALLER
FB-50x6 FOR 2"
INLET PIPE
2" & SMALLER
NOTE
1. MATERIAL
- GUSSET PLATE : SAME AS RUN PIPE OR MAT'L TABLE.
CODE RUN PIPE GUSSET PLA TE

y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
SYMBOL & CODING
P/S SID. NO. PIPE MATERIAL DO NOT INDICA TE
SUPP'T SERIAL NO. --~ c____ _ DM "A"

PLAN DWG. NO. - - - - - - - - ' L---- PIP SIZE "p"
PLAN ISO
--------------------------------··-·---
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1252 GUSSET SUPPORT PS- 2
(FOR BRANCH PIPE, WELDING T'fPE) AO
m. s
PIPE SIZE "p"
FB 25x6 t FOR 1 1¡2· ANO SMALLER <(
FB 50x6t FOR 2" (T'fP.)
-~AQER
MOTHER PIPE SIZE 'ºP1"

TYPl!-A
MOTHER PIPE SIZE "P1''
HEADER
PIPE SIZE "p" <(
MIN. 450 MAX.
TYPl!-B TYPl!-C
2'' & SM ALLER
1. DESIGN APPLICA TION
- LINES TO & FROM RECIPROCA TING COMPRESSORS & PUMPS.

- LINES 'MTH ANSI 1500# RA TING ANO ABOVE
- LINES 'MTH OOUBLE BLOCK VAL VES.
- LINES TO & FROM CENTRIFUGAL COMPRESSORS 'MTHIN 20" PIPE DIAMETER OF THE COMPRESSOR.
2. MATERIAL
- GUSSET PLA TE : SAME AS RUN PIPE OR MA T'L TABLE.
CODE RUN PIPE PLATE
K API SL GR.8, A106 GR.8 A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
SYMBOL & COOING
p/S sm. NO. --~ PIPE MATERIAL DO NOT INDICA TE

SUB-T'fPE ~--DIM "A"
SUPP'T SERIAL NO. - - - - - P I P E "P1"
PLAN DWG. NO. ~----- PIPE SIZE "p"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1253 GUSSET SUPPORT p S- 3
(FOR BRANCH PIPE. U-BOL T TYPE, AO
FOR HEA T TREA TED PIPE
U-BOLT
(UBT)
TYPE-A
HEADER
PlPt ""Sl7[-pf'
TYPE-B
---+--
PIP SIZE "p" llEKBER ")f'
UNIT (mm)
p~~~ ~~.E MEMBER "M" A B

1.1 /2" & SMALLER A3 120 65
2" & SMALLER 2 AS 140 75
4. MATERIAL
- CLAMP, BOL T/NUT
NOTE CODE RUN PIPE CLAMP BOLT & NUT
1. FIELD TO TRIM MEMBER TO MATCH RADIUS OF CLAMP. K APl-SL GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H
2. FIELD TO CUT LENGTH AS REQUIRED.
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
3. DESIGN APPUCATION X A312 TP304, TP316 A240 TP304 OR EQ. A193-B7 /A194-2H
- UNES TO & FROM RECIPROCA TING COMPRESSORS & PUMPS. z A312 TP321 A240 TP321 OR EQ. A193-B7 /A194-2H
- UNES 'MTH ANSI 1500# RATING AND ABOVE 5. SEE DWG NO. ST-M-1001 FOR THE DETAil OF U-BOLT.
- UNES 'MTH DOUBLE BLOCK VAL VES.
- UNES TO & FROM CENTRIFUGAL COMPRESSORS 'MTHIN 6. SEE DWG. NO. ST-A4-1014 FOR THE DET AIL OF CLAMP.
20" PIPE DIAMETER OF THE COMPRESSOR.
SYMBOL & CODING
CLAMP MAT'L
P/S SID. NO. DO NOT INDICA TE
HEADER SIZE "pl''
SUB-TYPE ~--- PIPE SIZE "p"
SUPP'T SERIAL NO. ~----- PLAN DWG. NO.
PLAN ISO
REV
PIPING SUPPORT STANDARD DWG. ST-A4-1255 STOPPER LUG PS-11
(FOR RISER PIPE) AO
P1I ----~
45'
CD
2-1/2" & SMALLER 3" TO 12" 14" TO 30"
LOCATION OF STOPPER LUG
UNIT lmm)
NOM. ALLOW. LOAD
PIPE SIZE REQ'D WEIGHT
(INCH) A B e o E T NO. a (Kg) (Kg)
1/2" 50 20 30 15 2 6 2 4 0.12 650
3/4" 50 20 30 15 2 6 2 4 0.12 650
1' 50 20 30 15 2 6 2 4 0.12 650
1-1/2" 50 20 30 15 2 6 2 4 0.12 650
2" 50 20 30 15 2 6 2 4 0.12 650
2-1/2' 50 20 30 15 2 6 2 4 0.12 1000
3' 50 20 30 15 3 9 4 6 0.36 2600
4' 50 20 30 15 3 12 4 6 0.48 2600
5' 50 20 30 15 3 12 4 6 0.48 2600
6' 75 45 30 15 5 16 4 6 1.0 3800
8' 75 45 30 15 5 16 4 6 1.0 3800
10· 100 50 40 15 7 19 4 6 2.04 4600
12· 100 50 40 15 7 19 4 6 2.04 4600
14• 100 50 50 20 8 22 6 9 4.38 8350
16" 100 50 50 20 8 22 6 9 4.38 8350
18" 120 70 50 20 10 28 6 9 6.9 8700
20" 120 70 50 20 10 28 6 9 6.9 8700
24" 140 75 60 20 14 28 6 9 10.92 8700
26" 140 75 60 20 14 32 6 9 10.92 8700
28" 140 75 60 20 14 32 6 9 10.92 8700
30' 140 75 60 20 14 32 6 9 10.92 8700
NOTE CODE RUN PIPE LUG PLATE

1. MATERIAL K API 5L GR.B, A106 GR.B A283 GR.C OR EQ.
- LUG PLATE : SAME AS RUN PIPE OR MAT'L TABLE. y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
L A333 GR.6 A516 GR.60 OR EQ.
N A333 GR.3 A203 GR.O OR EQ.
SYMBOL & CODING
P/S SID. NO.
SLJpp'T SERIAL NO. PIPE MAT'L
PLAN DWG. NO.----~ L---- PIPE SIZE 'p"

PLAN ISO
ESFAHAN REFINERY UPGRADING PRDJECT
STANDARD PIPE SUPPDRT, 3607 /32-SD-5100
REV
PIPE PAD PS-23
(FOR POINT CONTACT) AO
11l3MM THR'D
VENT HDLE
DO NOT
\llELD
•·. .a. . ... ·
50-100
UNIT (mm)
DIMENSION RUN PIPE ALLOWABLE LOAD (Kg)
THICK c.s A.S s.s

L R SIZE (t) 'MTHOUT PAD 'MTH PAD 'MTHOUT PAD 'MTH PAD 'MTHOUT PAD 'MTH PAD
400 109.6 8" sm 200 500 200 500 100 400
400 136.5 10· sm 300 700 200 700 200 600
400 161.9 12· sm 300 900 300 800 300 700
400 177.8 14" sm 300 900 300 900 300 800
400 203.2 16" sm 400 1000 300 1000 300 800
400 228.6 18" sm 400 1100 400 1000 300 900
400 254 20· sm 400 1200 400 1100 300 1000
400 305 24" sm 500 1400 400 1300 400 1100
450 331 26" sm 500 1400 400 1300 400 1200
450 356 28" sm 500 1500 500 1400 400 1200
450 381 30• sm 500 1600 500 1500 400 1300
450 407 32" sm 500 1600 500 1500 400 1300
450 432 34• sm 500 1700 500 1600 400 1400
450 458 36" sm 500 1700 500 1600 400 1400
500 534 42" 11.13 800 2400 700 2200 600 2000
500 610 48" 11.13 800 2500 700 2400 700 2100
500 762 60" 12.7 900 2800 800 2600 700 2300
500 838 66" 12.7 900 2900 800 2700 700 2400
500 864 68" 12.7 900 3000 800 2800 700 2500
NOTE
1. THE BASIS OF ALLOWABLE LOAD ARE AS FOLLOWS ; 2. MATERIAL

- MAT'L : SEE TABLE - PAD : SAME AS RUN PIPE OR MAT'L TABLE.
- OPER. TEMP : SEE TABLE
CODE RUN PIPE PAD
- CODE STRESS (DUE TO PRESSURE + BENDING) $. 0.5 Sh K API 5L GR.B A106 GR.B A283 GR.C OR EQ.
- RUN PIPE 1HICK : SEE TABLE y A335 P11 A387 GR.11 OR EQ.
- AREA OF POINT CONTACTED ~ 1 (mm') w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
SYMBOL & CODING
o
~
( (
) )
~ ~
P/S STO. NO.
PIPE MAT'L

PLAN ISO
REV
PIPE PAD PS-24
PIPING SUPPORT STANDARD DWG. ST-A4-1258 ~
(FOR UNE CONTACT) AO
h
- ·-¡-1;-~oo
r ~~NTHOLE
--
163MM THR'D.
-1 - -
\.
1
drc
1
1
---
L=Ll \ \
~
UNIT (mm)
DIMENSION RUN PIPE ALLOWABLE LOAD (Kg)
THICK C.S A.S s.s

L R SIZE
(t) WITHOUT PAD WITH PAD WITHOUT PAD WITH PAD WITHOUT PAD WITH PAD
400 254 20· STO 1900 6200 1800 5800 1600 5200
400 305 24" STO 1800 5800 1700 5400 1500 4800
450 331 26" STO 1700 5600 1600 5300 1400 4700
450 356 28" STO 1700 5500 1600 5100 1400 4600
450 381 30" STO 1700 5400 1500 5000 1400 4500
450 407 32" STO 1600 5200 1500 4900 1300 4400
450 432 34• STO 1600 5100 1500 4800 1300 4300
450 458 36" STO 1600 5000 1400 4700 1300 4200
500 534 42" 11.13 1900 6100 1800 5700 1600 5100
500 610 48" 11.13 1800 5800 1700 5400 1500 4900
500 762 60" 12.7 1700 5300 1600 5000 1400 4400
500 838 66" 12.7 1600 5100 1500 4800 1400 4300
500 864 68" 12.7 1600 5100 1500 4700 1300 4200
NOTE
1. THE BASIS OF ALLOWABLE LOAD ARE AS FOLLOWS ; 2. MATERIAL

. MAT'L : SEE TABLE - PAD : SAME AS RUN PIPE OR MAT'L TABLE .
. OPER. TEMP : SEE TABLE CODE RUN PIPE PAD
. CODE STRESS (DUE TO PRESSURE + BENDING) ~ 0.5 Sh K API 5L GR.B A106 GR.8 A283 GR.C OR EQ.
. RUN PIPE THICK : SEE TABLE y A335 P11 A387 GR.11 OR EQ.
. LENGTH OF UNE CONTACTED(B) : 1OOmm (IF "B" IS 150mm, w A335 P22 A387 GR.22 OR EQ.
ALLOWABLE LOADS MAY INCREASE TO 40%.) X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
3. PIPE PAD SHALL BE USED FOR 20" & LARGER BARE PIPE.
SYMBOL & CODING
~
1 PS24-Ll.QQJ-1i· -K l (
J o (
)
__j
k
P/S SID. NO.
PLAN DWG. NO.

'----- PIPE MA T'L
PIPE SIZE "p"

~
PLAN ISO

RESTING RC-1 REV.
(FOR MUL TI PIPES ON CONCRETE WALL) AO
EQUIVALENT PIPE SIZE "Pe"

2
/ Pe=/P, + P,2+ --
A
100
TYP.
6
UNIT (mm)
L :$ 500 500<L:S1000
EQV. PIPE
SIZE "Pe" MEMBER ALLOW. MEMBER ALLOW.
SIZE "M" LOAD (KG) SIZE "M" LOAD (KG)
3/4" A5 80 A7 60
MEMBER "M" 1" A5 80 A7 60
1-1/2" A5 80 A7 60
2" A6 150 A10 140
EXISTING COLUMN OR WALL

3" A7 280 C12 340
4" A10 560 C12 340
5" C10 880 C15 680
8" C12 1600 C20 1900
NOTE
l= ,---
1
PLA TE DETAIL
EXISTING COLUMN OR WALL
SYMBOL & CODING
P/S STO. NO. ELEV "E"

SUB-TYPE ~---DIM"C"
SUPP'T SERIAL NO. --~ ~-----DIM "A" (INDICA TI \IHH LARGEST UNE)
PLAN DWG. NO. ~------- EQV. PIPE
SIZE "Pe"
PLAN ISO
REV.
RESTING RC-3

A / Pe=/P,'+ P,'+ --
"fl'_" DETAil
EXISTING INSERT E'.
1 · A • 1
MEMBER SIZE "M" AND ALLOWABLE LOAD "W"

UNIT (mm)
EQUIV. L < 500 500 < L s 1000 1000 < L s 1500 EQUIV. L < 500 500 < L s 1000 1000 < L s 1500
PIPE PIPE a
SIZE
a
"M" w "M" w "M" w SIZE "M" w "M" w "M" w
"Pe" (kg) (kg) (kg) "Pe" (kg) (kg) (kg)
3/4" 6 - - A6 200 A6 140 10" 6 C12 1700 C15 1500 H12 2300
1· 6 - - A6 200 A6 140 12" 6 C12 1700 C15 1500 H12 2300
1-1/2" 6 - - A6 200 A6 140 14" 6 C15 2800 H12 3300 H12 2300
2" 6 - - A7 400 A7 260 16" 6 C15 2800 H12 3300 H12 2300
3" 6 - - A7 400 C12 500 18" 9 C15 2800 H12 3300 H12 2300
4" 6 - - C10 500 C12 500 20" 9 H12 5700 H15 5100 H15 3500
6" 6 C10 950 C12 900 C15 1000 24" 9 H12 5700 H15 5100 H15 3500
8" 6 C10 950 C12 900 C15 1000
NOTE
SYMBOL & CODING
¡ 1
P/S STO. NO. ELEV "E"

SUB-TYPE ~---DIM "A"
SUPP'T SERIAL NO. ~----- EQV. PIPE
(INDICA TE l'llTH LARGEST UNE)
PLAN DWG. NO. SIZE "Pe"
PLAN ISO
UH11
---1(/)
FOR ANGLE SHAPE FOR C-SHAPE FOR H-SHAPE )>'l
z)>
u OI
)>)>
EQUIVALENT PIPE SIZE "Pe" u ::uz
LJ
r
)>
(/)
LJ [O(/)
(/)"'"'O
e e-.......... Pe=/P,'+ P,'+ -- 6 6 z o :;()
C)
~ ~ ~~
o lJ fTl
>{)
--ri
:;: Ul =tí o (_() LJ-
C) ,.,., ,.,.,
rriZ
.
:z
;u
>:
z
o
e fTl
9 1 . u (/) :;()
z u e-<
!=' o lJ
LJC
:::a
__, oLJ
:;() C)
_,:;u
- )>
(_()
__, (_,.Jº
)> mz
EXISTING INSERT PLA TE EXISTING INSERT PLA TE EXISTING INSERT PLA TE o
z SGJ
TYPE-A )>
'---- lJ
0J :;()
:::a NO
o 1
(/) fTl
e_
ILIV "!•
(_()
o
~
ºº
I_,
Ul
-<
~
C)
o
co o
o
1
Ul
___,
(f)rrl CJ CJ rr1 rr1
Ro
1
E;i~ ~ ~MM
1·1. :; :s<< n )>
-+:>-
-¿-o> m
=o :; :;
,,.,., l"T1
::r
~
::r
o 1
(ti
o 6 6 N
z CTl
GJ
C) TYPE-B
MEMBER SIZE "M" AND ALLOWABLE LOAD "W'
EQUIV. A < 500 500 < A S 1000 1000 < A S 1500 1500 < A S 2000 EQUIV. A < 500 500 < A S 1000 1000 < A S 1500 1500 < A S 2000
PIPE H PIPE H
SIZE (MAX.) "M" w "M" w "M" w "M" w SIZE (MAX.) "M" w "M" w "M" w "M" w .,.,
~I ~Hl
(kg) (kg) (kg) (kg) (kg) (kg) (kg) (kg) o
"Pe" "Pe" ;u
;:o
;;:::
fTl
1000 AS 340 A6 400 A6 280 A7 450 1000 C12 2000 C15 2100 C15 1830 H12 3100 e: Ul
1"N3" 12" r-
1500 AS 330 A6 350 A6 250 A7 400 1500 C12 2000 C15 1820 C15 1450 H12 2700 ::::! =!
"lJ
z
1000 A6 590 A7 650 C10 650 C10 520 1000 C12 2000 C15 2100 H12 3800 H12 3100 =¡; GJ
,.,.,
4" 14" Ul
1500 A6 570 A7 590 C10 550 C10 400 1500 C12 2000 C15 1820 H12 3300 H12 2700
o
1000 A7 1100 C12 1300 C12 1150 C12 950 1000 C15 3500 H12 4670 H12 3800 H15 4800 z
6" 16"
z
o
¡=¡
> 8"
1500
1000
A7
C10
1080
1150
C12
C12
1130
1300
C12
C12
1000
1150
C12
C15
800
1610
18"
1500
1000
C15
C15
3120
3500
H12
H12
4050
4670
H12
H15
3300
5800
H15
H15
4250
4800
ª::u
~o
rrl / 1500 C10 1000 C12 1130 C12 1000 C15 1200 1500 C15 3120 H12 4050 H15 5000 H15 4250 ¡;:j 1
;;;
l/)
:I! ;u
o 1000 C12 2000 C15 2100 C15 1830 C15 1610 1000 - - H12 4670 H15 5800 H15 4800 ~ (J1
10" 20" N24"
o r-
>
;o
<.n
>1 1500 C12 2000 C15 1820 C15 1450 C15 1200 1500 - - H12 4050 H15 5000 H15 4250 E
~
U) oo ;:u
-< tD NOTE )>
í'l
e:
o :c.
D
·- -·--------·---------------------------------
PIPING SUPPORT STANDARD DWG. ST-A4-1264(1/2)

RESTING RC-7 REV.
(T- TYPE ON CONCRETE) AO
A A
• 6 100 ~100
MEMBER "M"
oo
:i:: S' oo
x o
<(
2.. x
<(
2..
ELEV "F"
TYPE-F TYPE-P
(ON FOUNDATION) (ON PAV1NG)
8" & SMALLER
UNIT (mm)
MEMBER SIZE "M"
EQUIVALENT
A-:5 500
PIPE SIZE "Pe"
H-:5500 500<H-:51000 1000< H-:5 1500 1500< H-:5 2500
3/4" A5 A6 A6 -
1" ¡ ¡ A6 -
1-1/2" A6 A7 A7 -
2" 1 1 A7 C10
3" A6 A7 A7 C10
4" C10 C10 C12 C15
6" C12 C12 C12 C15
8" C12 C12 C12 C15
NOTE

FOR THE DETAil OF EXPANSION ANCHOR BOLT ANO BASE PLATE(BPLA)
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
SUPP'T SERIAL NO.
ELEV "F"
~--ELEV
L - - - - - D I M "A"
"E"
XRC~0091 1
' - - - - - - - - EQV.PIPE SIZE "pe" (INDICA IT 'MTH LARGEST UNE)

PLAN DWG. NO.
PLAN ISO
(./) fTl
----iUl
EQUIVALENT PIPE SIZE "Pe" )>'l
2 z)>
-- /Pe=/P, + P,'t -u o:r
100 - )>)>
-u :::oz
z o
o '"" "r>-orn "
e e..........._
(/)
(/)
(/)
C) -o fTl
--,-,
:;:o
"""=o o:E(/) ~
z -q 1 (/)
-o-
-t ---i (/) fTlZ
'"" 0 f"T1 r"'1
~
e fTl
(/)
¡::::¡
z>
:;o z
e:> -u (./):::0
e-<
'""' e:> r -u -o
""' ' z
e:>
o -oc
1 ::::o
___, o-o
;oc:>
----i:;:o
(/) - )>
~-----oHO
"'g )>
___,
(.Nº
O"lZ
EXISTING INSERT PLA TE EXISTING INSERT PLA TE EXISTING INSERT PLA TE z OC)
'--J
~-----~H.
.!.. o "-..-o
)> (.N :;:o
::::o NO
o 1
(./) fTl
e_
(/)
o
~
ºº
1 ----i
(Jl
-< C)
o
~
[JJ o
o 1
1 (J)
----i
R" 1
)>
-+>-
oº
I~
p p 1
~ ~ ~ ~ N
Ml=B_ m
>= m= ~= i:= -+>-
C)
....--..
MEMBER SIZE "M" AND ALLOWABLE LOAD "y¡" N
~ . "-..
EQUIV. A < 500 500 < A ~ 1000 1000 < A ~ 1500 1500 < A ~ 2000 EQUIV. A < 500 500 <A ~ 1000 1000 < A ~ 1500 1500 < A ~ 2000 ~
PIPE H PIPE H
a w w w w a w w w w
SIZE (MAX.) "M" "M" "M" "M" SIZE (MAX.) "M" "M" "M" "M" --
"Pe" (kg) (kg) (kg) (kg) "Pe" (kg) (kg) (kg) (kg)
f'lli
1000 A5 180 AS 180 - - - - 1000 C15 2200 C1S 2100 C1S 2000 C1S 16SO ~
2'' 6 12" 6 o
:;o
;o
1SOO A5 130 AS 130 - - - - 1SOO H12 3800 H12 3300 H12 3100 H12 2900 fT1
;;::: (J)
1000 A6 330 A6 330 - - - - 1000 C15 2200 C1S 2100 H12 3700 C15 3000 e :::!
~I
r
3" 6 14" 6 ::J z
1500 A6 230 A6 230 - - - - 1500 H12 3800 H12 3300 H12 3100 H12 2900 ., C"l
1000 A? 630 A7 630 A? 550 A? 400 1000 H12 5000 H12 4600 H12 3700 H12 3000
=o
4" 6 16" 6 '""
(/)
1500 A? 430 A7 430 A7 500 A? 400 1SOO H12 3800 H12 3300 H12 3100 H12 2900 o
1000 C10 700 C10 700 C12 1200 C12 1000 1000 - - H12 4600 H12 3700 H12 3000 ~;a
zo 6" 6 18" 9 ~ ()
1500 C12 8SO C12 830 C12 770 C12 6SO 1500 - - H12 3300 H12 3100 H12 2900
¡=;
> 1000 C12 1300 C12 1300 C12 1200 C12 1000 1000 - - H12 4600 H12 3700 H12 3000
~ 1
¡:;:¡ (X)
:~
\ / 8" 6
1SOO C15 1500 C15 1500 C15 1400 C15 1250
20" 9
1500 - - H12 3300 H12 3100 H15 4700 :E
>
~
r
[/]
o 1 :I'
s;: >
1000 C15 2200 C15 2100 C15 2000 C15 1650 1000 - - H15 7500 H15 6000 H15 4800 s
10" 6 24" 9
"' 1 1500 C1S 1500 C15 1500 H12 3100 H12 2900 1500 - - H15 5300 H1S 5000 H15 4700
C)
,.., oo
':".1
e
5
<D
NOTE
~,.,., ~
PIPING SUPPORT STANDARD DWG. ST-A4-1266 RESTING RC-1 o REV.
,
ELEV "I•
.
••
:r:
MEMBER SIZE "M" AND ALLOWABLE LOAD "W" UNIT (mm)

EQUIV. A< 500 500 <A ~ 1000 1000 < A ~ 1500 1500 < A ~ 2000 EQUIV. A< 500 500 < A ~ 1000 1000 < A ~ 1500 1500 < A~ 2000
PIPE H PIPE H
SIZE (MAX.) "M" w "M" w "M" w "M' w SIZE (MAX.) "M" w "M" w "M" w 'M" w
'Pe" (kg) (kg) (kg) (kg) "Pe" (kg) (kg) (kg) (kg)
1000 A5 180 A5 180 - - - - 1000 C12 1300 C12 1300 C12 1200 C12 1000
2"
1500 130 A5 - - - -
a· 1500 C15 1500 C15 1500 C15 1400 C15
A5 130 1250
1000 A6 330 A6 330 - - - - 1000 C15 2200 C15 2100 C15 2000 C15 1650
3" 10·
1500 A6 230 A6 230 - - - - 1500 C15 1500 C15 1500 - - - -
1000 A7 630 A7 630 A7 550 A7 400 1000 C15 2200 C15 2100 C15 2000 C15 1650
4" 12"
1500 A7 430 A7 430 A7 500 A7 400 1500 - - - - - - - -
1000 C10 700 C10 700 C12 1200 C12 1000 1000 C15 2200 C15 2100 - - - -
6" 14"
1500 C12 850 C12 830 C12 770 C12 650 1500 - - - - - - - -
.tillIE
SYMBOL & CODING
P/S STD. NO.

SUPP'T SERIAL NO.
ELEV "F"
ELEV "E"
¡
1 RCt-009
1
1
X 1 RCl009 1
PLAN DWG. NO. DIM "B" (INDICA TE IMTH LARGEST UNE)

DIM 'A"
EQV. PIPE SIZE 'Pe"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1267 RESTING RC-11
ELEV •F•
le. 6
EQUIVALENT PIPE SIZE "Pe" 1

6
A
Pe=M + Pi+ --
(MAX. 500)
TYPE-A TYPE-B
UNIT lmm)
EQUI. H:s;soo 500<H ::;1000 1000< H :s;1 soo
PIPE SIZE MEMBER ALLOWABLE MEMBER ALLOWABLE MEMBER ALLOWABLE
"Pe" "M" LOAD (Kg) "M" LOAD (Kg) "M" LOAD (Kg)
3/4" A5 100 A6 100 A6 80
1" A5 100 A6 100 A6 80
1-1/2" A6 200 A7 180 A7 140
2'' A6 200 A7 180 A7 140
NOTE
SYMBOL & CODING
P/S STO. NO.

SUB-TYPE
SUPP'T SERIAL NO.
~---- DIM "B"
~------DIM "A"
ELEV "F"
' - - - - - - ELEV "E"
XR~~009
1 j
(INDICA TE \llllH LARGEST UNE)

PLAN DWG. NO. - - - - - ' ~------- EQV. PIPE
SIZE "pe"
PLAN ISO

RESTING RC-13 REV.

1 · 2
Pe=/P, + P,'+ --
¡;::~::::i ELEV. "!"

--0-r--
1

EQUIVALENT PIPE SIZE 'Pe"
1· Pe=vtJ,'+ P,'+ --
"°"11? ELEV. "!"

--1!1--
c::!JS
1
EXISTING INSERT PLATE
UNIT (mm)
EQUIV. A ~ 500 500<A~1000 1000 < A ~ 1500

EQUIV. A ~ 500 500 <A ~1000 1000 < A ~ 1500 1500 < A
~ 2000
PIPE SIZE MEMBER ALLOW. MEMBER ALLOW. MEMBER ALLOW. PIPE SIZE MEMBER ALLOW. MEMBER ALLOW. MEMBER ALLOW. MEMBER ALLOW.
"Pe" SIZE 'M' LOAD(Kg) SIZE "M" LOAD(Kg) SIZE "M" LOAD(Kg) "Pe" SIZE "M" LOAD(Kg) SIZE "M" LOAD(Kg) SIZE "M" LOAD(Kg) SIZE "M" LOAD(Kg)
2" A5 400 A5 200 A5 150 14' C12 5000 C12 2400 C15 2800 C15 2000
3' A5 400 A5 200 A6 250 16" C15 8000 C15 4000 C15 2800 C15 2000
4" A6 800 A6 400 A7 500 18" C15 8000 C15 4000 C15 2800 C15 2000
6" A7 1400 A7 700 A7 500 20" C15 8000 C15 4000 H12 5000 H12 4000
8" A7 1400 A7 700 C12 1500 24" H12 15000 H12 8000 H12 5000 H12 4000
10" C10 2800 C10 1400 C12 1500
12" C10 2800 C10 1400 C15 2800
NOTE
SYMBOL & CODING
P/S STO. NO.
SLJpp'T SERIAL NO.

L . . __ _ _ DIM "A'
X1RC~091
' - - - - - - - - EQV. PIPE (INDICATE 'MTH LARGEST UNE)
PLAN DWG. NO. ----~ SIZE 'Pe"
PLAN ISO
REV.
RESTING RC-14

f-,-----'=--..:..,-.i Pe=/P,'+ P,'+ --
MEMBER "M"
TYPE-A TYPE-B
UNIT (mm)
EQUIV. H~500 500<H~ 1000 1000<H~ 1500 1500 <H~ 2500
PIPE SIZE MEMEBER ALLOWABLE MEMEBER ALLOWABLE MEMEBER ALLOWABLE MEMEBER ALLOWABLE
"Pe" "M" LOAD (Kg) "M" LOAD (Kg) "M" LOAD (Kg) "M" LOAD (Kg)
3/4" A5 100 A6 100 A6 80 - -
1" A5 100 A6 100 A6 80 - -
1-1/2" A6 200 A7 180 A7 140 - -
"ll" DETAil 2" A6 200 A7 180 A7 140 C10 160
3'' A6 200 A7 180 A7 140 C10 160
6" C10 300 C10 250 C10 200 C15 230
8" C10 300 C10 250 C10 200 C15 230
NOTE
SYMBOL & CODING
P/S STO. NO.

SUB- TYPE
SUPP'T SERIAL NO.
ELEV. "F"
ELEV "E"
DIM "c"
l
1
1
Rl-009 j
XRCl\,09
1 1
DIM "A" (INDICA TE 'MTH LARGEST UNE)

PLAN DWG. NO.
EQV.PIPE SIZE "Pe"
PLAN ISO

RESTING RF-1 REV.
(FOR VIBRA TED MULTI PIPES ON F/D) AO
/ Pe=/P,'+ P,'+ --
50 (MAX.150) / 50
__&
.. .
----,..-------y--------------..----
1 1 1 ...
..
1 1 1
1 1 1
1 1 1
.•,.. :.d
.· . .O
.. .· .. ·· . .i
..,.
·. .d ..
.... .., ..... . .... . . ..

• A
4·
./'
. 4 .. ·•
TYPE-A

2 2
/ Pe=/P, + P, +
H20
.4
ºs::[,...,..
,. ~
.•
4 ·,;
---~·
. .. . ..... : ..,
.·
.
·
·.:
. ir .· .. ·. . .., .;
..•
A50
TYPE-B
NOTE
l. TYPE-A : Pe=8" & SMALLER

TYPE-B : Pe=10" & LARGER
2. THE SUPPORT LOCA TION & ELEVATION SHOULD BE INFORMED

TO Cl\ilL ENGINEER FOR FOUNDA TION DESIGN.
SYMBOL & CODING
P/S STO. NO.-----'

SUB-TYPE
SUPP'T SERIAL NO. --~
~----
~--DIM
ELEV "E"
"A"
EQV.PIPE SIZE "Pe"
J
1--~-_,_
RF¿009 J
X 1 RF1)009 j
PLAN DWG. NO. - - - - - - - ' (INDICA TE l\HH LARGEST UNE)
PLAN
L . ~ -
REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1272 RESTING RF-2
(FOR MULTI PIPES ON F/D) AO

/ Pe=/P,'+ P,'+ --
~
6
1 •
NPS 3"
11 (SID WT)
A5
... ,
1. TYPE-A IS FOR SLOPPED UNE ONLY.
2. THE SUPPORT LOCATION & ELEVATION SHOULD BE INFORMED

TO CIVIL ENGINEER FOR FOUNDA TION DESIGN.
SYMBOL & CODING
P/S STO. NO.

SUB- TYPE
ELEV "E"
' - - - - - DIM "A"
l 1
X 1 RFJ-009 1
SUPP'T SERIAL NO. ~----- EQV.PIPE SIZE "Pe" (INDICA TE 'MTH LARGEST UNE) 1
PLAN DWG. NO.
PLAN ISO
REV.
RESTING RF-3
(FOR MUL TI PIPES ON F/D) AQ

Pe=..JP/+ P,'+ --
C15
TYPE-A
H20

TYPE-B TYPE-C
I. e .I. e .I
NOTE
1. THE SUPPORT LOCA TION & ELEVA TION SHOULD BE INFORMED
TO Cl'vlL ENGINEER FOR FOUNDA TION DESIGN.
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
ELEV. "E"
DIM "A"
~
RFJ-009
1 1
SUPP'T SERIAL NO. EQV.PIPE SIZE "Pe" (INDICA TE \IHH LARGEST UNE)
PLAN DWG. NO. - - - - - - - '
PLAN ISO
UHTl
-HJ)
)>'l
z)>
-o OI
)>)>
-o ;;uz
\J {/') {/')
r- e e.........._
\J
z o
> -o m {/') A ;;u
G)
~ ~~ ~ 11!. 6 11!. 6 1 "lJ fTl
=o:::'.:!
:E (/) =tí <::> U)
fTlZ
~
rTl rTl
~
G)
.
:z:
;u
>
z
p
e fTl
~ r -o U) ;;u
z -o e--<
"lJ
~ o -oC
AJ o-o
ºt ..
·4·~. ~-· ·•.a
-!
U)
__,;:
;;u GJ
-! (.,.Jº
)> mz
TYPl-A TYPl-B
2 x 4-d~ EXPANSION BOLT z
o
s0
"-...__ "lJ
TYPl-C 1
)> (.,.J ;;u
AJ NO
o 1 e__
U) fTl
o ºº
~~
NOTE 1 _,
U) ~ ()1
--<
~
1. SEE DWG. NO. ST-A4-1032 FOR EXPANSION ANCHOR BOLT AND BASE PLATE(BPLR) DETAil AND 0 ~
o
rn ALLOWABLE LOADS. o
o 2. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
1
rr1 Drrl rr1 R=' FOR H-SHARPE

.o - r-
< s:::: r'1
:s< <
r
rr1 _,
(/)
"""O ()
MEMBER SIZE "M" AND ALLOWABLE LOAD "W'' 1
~>~rii o )>
..p..
(/) o EQUIV. A < 500 500 <A $1000 1000 < A $ 1500 1500 <A $ 2000 EQUIV. A < 500 500 <A $1000 1000 < A $ 1500 1500 < A $ 2000 2000 < A $ 3000 1
~ z PIPE H
w w w w PIPE H
w w w w w N
-o G) SIZE (MAX.) "M" "M" "M" "M" SIZE (MAX.) "M" "M" "M" "M" "M" --.j
"Pe" (kg) (kg) (kg) (kg) "Pe" (kg) (kg) (kg) (kg) (kg) ..p..
"'· - - - -
1000 A5 180 A5 180 1000 H12 5000 H12 4600 H12 3700 H12 3000 H12 2500
2" 16"
1500 A5 130 A5 130 - - - - 1500 H12 3800 H12 3300 H12 3100 H12 2900 H12 2300
1000 A6 330 A6 330 - - - - 1000 - - H12 4600 H12 3700 H12 3000 H12 2500
3" 18"
~I ~ffi
1500 A6 230 A6 230 - - - - 1500 - - H12 3300 H12 3100 H12 2900 H12 2300 -:::;:;- ;;o
630 A7 A7 1000 - - H12 4600 H12 3700 H12 3000 H12 2500 o;;o fTl
1000 A7 630 A7 550 400 (/)
4" 20" s::: _,
1500 A7 430 A7 430 A7 500 A7 400 1500 - - H12 3300 H12 3100 H15 4700 H15 4300 e
r
-
:z
1000 ClO 700 ClO 700 C12 1200 C12 1000 1000 - - H15 7500 H15 6000 H15 4800 H15 4500 =J GJ
6" 24" -o
1500 C12 850 C12 830 C12 770 C12 650 1500 - - H15 5300 H15 5000 H15 4700 H15 4300 =o
,...,
8"
1000 C12 1300 C12 1300 C12 1200 C12 1000
26"
1000 - - H15 5000 H15 4700 H20 4800 ~
z
::::o
...,
1500 C15 1500 C15 1500 C15 1400 C15 1250 1500 - - H15 5000 H15 4700 H20 4800
z
D
1000 C15 2200 C15 2100 C15 2000 C15 1650 1000 - - H15 5000 H20 5000 H20 4800 ~I
~x
10" 30"
1500 C15 1500 C15 1500 H12 3100 H12 2900 1500 - - H15 5000 H20 5000 H25 5300 U1
;¡¡; /
-
~I~~,
1000 C15 2200 C15 2100 C15 2000 C15 1650 1000 - H20 5000 H25 6000 H25 5300
12" 32"
1500 H12 3800 H12 3300 H12 3100 H12 2900 1500 - - H20 5000 H25 6000 H25 5300
1000 C15 2200 C15 2100 H12 3700 C15 3000 1000 - - H20 5000 H25 6000 H25 5300
14" 48" :;¡¡
1500 H12 3800 H12 3300 H12 3100 H12 2900 1500 - - H20 5000 H25 6000 H25 5300 )>
rrJ
,..., o
::::-

RESTING RF-7 REV.
(T- TYPE) AO
lt 6
El.IV "l.
MDABER "M"
El.IV -p•
TYPJ!-F TYPJ!-P
(ON FOUNDATION) (ON PAVlNG)
6" & SMALLER
UNIT (mm)
MEMBER SIZE "M"
EQUIVALENT
As_ 1000
PIPE SIZE "Pe"
H::s_500 500< H::s_1500
3/4" A5 A6
1" ¡ ¡
1-1/2" A6 A7
2" ¡ ¡
3'' A6 A7
4" C10 C10
6" C12 C12
8" C12 C12
10" C15 C15
12" C15 C15
16" H12 H12
20" H15 H15
24" H20 H20
NOTE
1. SEE DWG. NO. ST -A4-1031

FOR THE DETAil OF EXPANSION ANCHOR BOLT AND BASE PLATE(BPLA)
SYMBOL & CODING
P/S sm. NO.

SUB-TYPE
ELEV "F"
~--ELEV "E"
' - - - - - - - DIM "A"
X 1 RF)009
SUPP'T SERIAL NO. ' - - - - - - - - - EQV_PIPE SIZE "Pe" (INDICA TE \IHH LARGEST UNE)
PLAN DWG. NO.
PLAN ISO
- --------- - ------ - - - - - - - - - - - -- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -------------- ------------

REY.
RESTING RF -9
(T-TYPE FOR HEAVY DUTY) AO

EQUIVALENT PIPE SIZE "Pe" 2
/ Pe=/P, + P, '+ --
2 A
/ Pe=/P, + P,'+ --
A
t6 STOPPER
ILEV "E" c.>
PIPE SIZE "B" PIPE SIZE "B"
:r: :r:
5~ VENT HOLE
5~ VENT HOLE
4-EXPANSION
ANCHOR BOL TS "J"
ILEV "F"
EXISTING INSERT PLATIE
TYPl-F TYPE-P
(ON FOUNDATION) (ON PA'v1NG)
UNIT (mm)
BASE Ir."\" EQUIVALENT PIPE SIZE A H ALLOW.
PIPE SIZE "Pe" "B" MAX.' i(MAX.) K s oA oB J t LOAD (Kq)
4" 3" 2000 135 200 230 170 5/8" 9 410
6" 4" 2500 ¡ ¡
230 170 3/4" 16 740
8" 6" 240 250 330 270 3/4" 16 800
10" 6" 1 1 330 270 3/4" 16 800
4-RIB 12" 8" ¡ 1
330 270 3/4" 20 1500
FB 50x6 14" 10" 340 360 430 350 3/4" 20 3400
RIB PLA TlE DETAIL STOPPER 16" 10" ¡ ¡ 430 350 3/4" 20 3400
(H>2000)
NOTE
1. SEE DWG. NO. ST-A4-1031 FOR THE DETAil OF EXPANSION ANCHOR BOLT ANO BASE PLATE(BPLA)
2. FOR THE TYPE-P, USE ONLY FOR Hmax=1000.
SYMBOL & CODING
P/S STO. NO.

SUB-TYPE
SUPP'T SERIAL NO. ~-----
~---
ELEV "F"
ELEV "E"
DIM "e"
¡ 1
XR~0091 I
~------ DIM "A" (INDICA TE llHH LARGEST UNE)
PLAN DWG. NO. ---~
~-------- EQV.PIPE SIZE "Pe"
PLAN ISO
REV.
RESTING RF-12
PIPING SUPPORT STANDARD DWG. ST-A4-1277 (FOR 26" & OVER PIPE, ADJUSTABLE T'IPE) AO
A
B
1· 052
S:'
PIPE SIZE
"p"
ILIV "I•
---- ]
2"x405 l
S:' 2"HEX NUT
ELEVATION
WELD TO PLA TE
if;:f::====+====~~¡a---i60x60x16t C20
LOAD PLATE
.---+--,
"- ILIV •p•
H300x200
75 7
UNIT (mm)
PIPE SIZE ALLOW.

NPS •p• A B LOADS (Kg)
26" 930 750 10000
28" 960 780 10000
30" 1000 820 10000
32" 1030 850 10000
34• 1080 900 10000
36" 1110 930 10000
33• 1140 960 10000
40" 1180 1000 10000
42" 1230 1050 10000
43• 1340 1160 10000
NOTE
1. MATERIAL
- BOLT/NUT: A193-B7/A194-2H WITH GALVANIZED, USE 2" HEAVY HEX NUTS.
- SHAPE STEEL/PLA TE : A36 OR EQ.
SYMBOL & CODING
P/S STD. NO.

SUPP'T SERIAL NO. ~--
ELEV. "F"
ELEV. "E"
XR~OOS1 1
(INDICA TE 'MTH LARGEST UNE)

PLAN DWG. NO. ---~
~---- PIPE SIZE "p'
PLAN ISO
REV.
PIPE SIZE "p"

"a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION
"Q1"
TRUNNION "Q1"
oo oo
N N
ILIV •p• ILl!V "}"'
blPE SIZE NPS

NPS "p" ·a1·
2· 1-1/2"
TYPl!-F TYPl!-P .3" 2"
( ON FOUNDA TION) (ON PAVING)
4• 2"
6" 4"
"o"EQUALS THE 4•
8"
TRUNNION WALL TH'K o
10" 6"
12" 8"
14" 8"
16" 10"
18" 10·
TRUNNION "Q1" 20" 12"
oo 24" 12·
N oo
N 26" 14"
50 \IENT HOLE 28" 14"
30" 16"
EXISTING INSERT
32" 16"
PLATE \
.34" 18"
ILIV •p- ILl!V "}"' 18"
~~~~ 36"
40" 20"
42" 20"
TYPl!-S
(ON FOUNDATION) TYPl!-T
(ON PAVING) 2. MATERIAL
NOTE
- TRUNNION 01 : SAME AS RUN PIPE OR MAT'L TABLE.
1. SEE DWG. NO. ST-M-0004 - PLA TE : A.36 OR EQ.
FOR APPLICA TION OF REINFORCING PAD ANO
TRUNNION ALLOWABLE LOADS. CODE RUN PIPE TRUNNION "Q1"
y A.3.35 P11 A.335 P11 OR EQ.
3. SEE DWG. NO. ST-M-1032 FOR P&T TYPE
FOR THE DETAil OF EXPANSION ANCHOR BOLT AND BASE PLATE(BPLR) w A.3.35 P22 A.3.35 P22 OR EQ.
X A.312 TP.304, TP316 A.312 TP304 OR EQ.
z A.312 TP321 A.312 TP.321 OR EQ.
o ASTM 8444 GR.1 ASTM 8444 GR.1 OR EQ
L ASTM GR.6 A.33.3 GR.6 OR EQ.
SYMBOL & CODING

(IF REQ'D)
SUB- TYPE PIPE MAT'L
SUPP'T SERIAL NO.
~--ELEV. "F"
PLAN DWG. NO. - - - -
~---- ELEV. "["
PIPE SIZE "p"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1278H RESTING HRF -31
TRUNNION TYPE ON F /D)
FOR HIGH PRESSURE PIPlNG
AO
•a"EQUALS THE
TRUNNION WALL TH'K
ILIV "I•
50 VENT HOLE
EXISTING INSERT
PLATE
~~~'4
/ ILIV .,-
ºIPE SIZE NPS
NPS "p" ·01·
2· 1-1;2·
TYPl-r 3• 2"
(ON FOUNDATION)
4" 2"
6' 4"
•a'EQUALS THE
8" 4"
TRUNNION WALL TH'K
10" 6"
12" 8"
14" 8"
16" 10"
18" 10"
20· 12"
24" 12"
50 VENT HOLE
EXISTING INSERT
PLAT E \ r:-l$~~::""'1 -----'-=ILIV=-'---'.,.=--
TYPl-S
(ON FOUNDATION)
1. MATERIAL
- TRUNNION 01 : SAME AS RUN PIPE OR MAT'L TABLE.
K API 51.. GR.8, A106 GR.8 API 5L GR.8 OR EO.
y A335 P11 A335 P11 OR EQ.
w A335 P22 A335 P22 OR EQ.
X A312 TIP304, TIP316 A312 TIP 304 OR EO.
z A312 TIP321 A312 TP321 OR EO.
SYMBOL & CODING
P/S STD. NO.

SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
ELEV. "F'
PLAN DWG. NO. _ _ _ ___J HRF31F-009
HRF31F-009
~---- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
REV.
"a"EQUALS THE
TRUNNION WALL TH'K
"a"EQUALS THE
TRUNNION WALL TH'K
50 \IENT HOLE
EXISTING INSERT \
PLATE \
COLUMN "Q2" \
El.IV "1" ~~~
TYPE-S
TYPE-F ( ON FOUNDA TION)
(ON FOUNDATION)
NOTE

FOR APPLICATION OF REINFORCING PAD AND
TRUNNION ALLOWABLE LOADS. PIPE SIZE NPS PIPE SIZE NPS
NPS "p" 'Qi',"Q2" NPS "p" ·01',"Qt
2. MATERIAL 2" 1-1/2" 20· 12·
- TRUNNION Q1 : SAME AS RUN PIPE OR MA T'L TABLE. 3" 2· 24" 12"
- COLUMN 02 : API 5L GR.B OR EQ. 4" 2· 26" 14"
6" 4• 28" 14"
CODE RUN PIPE TRUNNION 8" 4• 30" 16"
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 32" 16"
10" 6"
y A335 P11 A335 P11 OR EQ.
12· 8" 34" 18"
w A335 P22 A335 P22 OR EQ.
14" 8" 36" 18"
X A312 TP304, TP316 A312 TP 304 OR EQ.
16" 10" 40" 20"
z A312 TP321 A312 TP321 OR EQ.
10"
A333 GR.6 OR EQ. 18" 42" 20"
L A333 GR.6
N A333 GR.3 A333 GR.3 OR EQ.

FOR THE DETAil OF EXPANSION ANCHOR BOLT AND BASE PLA TE(BPLR)
4. IF APPLICABLE ALL TRUNNION ON SHOP

FABRICATED PIPE CAN BE INSTALLED BY THE SHOP.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
PLAN DWG. NO. _ _ _ __J c . __ _ ELEV. "F"
~----- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
REV.
(AOJUSTABLE; TRUNNION TYPE ON F/O) AO

"a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION "Q1"
TRUNNION "Q1"
oo
N
ELEV "F"
EXISTING INSERT
PLATE
TYPE-F UP TO 24" TYPE-P

"a"EQUALS THE
TRUNNION WALL TIH'K PIPE SI ZE "p"
ELEV "E"
TRUNNION "Q1" oo TRUNNION "Q1" oo

N N
ELEV "F"
TYPE-S TYPE-T PIPE SIZE TRUNNION

NPS "p" NPS "Q1'
1-1/2" 1"
UP TO 24"
2" 1-1/2"
FOR APPUCA TION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
3" 2"
2. MA TIERIAL 4" 2"
- PLA TE : A36 OR EQ. 8" 4"
- BOLT/NUT : A307 GR.B GALVANIZED OR EQ.
10" 6"
CODE RUN PIPE TRUNNION 3. SEE DWG NO. ST-A4-1032 FOR TIHE DETAil OF 12" 8"
K API 5L GR.8, A106 GR.B API 5L GR.B OR EQ. EXPANSION ANCHOR BOLT ANO BASE PLA TIE(BPLS)
14" 8"
y A335 P11 A335 P11 OR EQ. OF TYPE-P & T.
16" 10"
w A335 P22 A335 P22 OR EQ.
4. SEE DWG. NO. ST-A4-1023 (2/4) 18" 10"
X A312 TP304, TP316 A312 TP304 OR EQ.
FOR THE DETAil OF ADJUSTABLE STANCHION(ADS) 20" 12"
z A312 TP321 A312 TIP 321 OR EQ.
24" 12"
A333 GR.6 A333 GR.6 OR EQ.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE TRUNNINON
' - - - - ELEV. "F"
PLAN OWG. NO.
~----- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
REY.
( ADJUST ABLE; TRUNNION TYPE ON F/D) AO
"a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION "01" TRUNNION "Q1"
50 VENT HOLE ELEV T
BASE PLATE BASE PLATE oo

;::!
COLUMN "Q2"
x
<(
x
<(
2.- 2.-
ELEV •r ELEV "r
TYPl-F TYPl-P
(ON FOUNDATION) UP TO 24" (ON PAVING)
•a"EQUALS THE
ILIV •¡•
oo oo
N BASE PLATE N
COLUMN "02''
ELEV ·r
TYPl-S TYPl-T
PIPE SIZE TRUNNION COLUMN
UP TO 24" NPS "p" NPS "01' NPS "02
1. SEE DWG. NO. ST-A4-0004 1-1/2" 1· 1
FOR APPLICA TION OF REINFORCING PAD AND TRUNNION ALLOWABLE LOADS. 2· 1-1 /2" 1-1 /2
2. MATERIAL 3• 2" 2
- TRUNNION "01" : SAME AS RUN PIPE OR MAT'L TABLE. 4• 2" 2
- COLUMN "02" : API 5L Gr.B OR EO. 6" 4" 4"
- BOLT/NUT : A307 GR.B GALVANIZED OR EQ. 8" 4'' 4"
10" 6" 6"
12· 8" 8"
3. SEE DWG NO. ST-A4-1032 FOR THE DETAil OF 14" 8" 8"
y A335 P11 A335 P11 OR EO.
EXPANSION ANCHOR BOLT ANO BASE PLATE(BPLR) 16" 10" 10·
w A335 P22 A335 P22 OR EO.
X A312 TP304, TP316 A312 TP304 OR EO. 4. SEE DWG. NO. ST-A4-1023 (2/4) 18" 10" 10"
z A312 TP321 A312 TP321 OR EO. FOR THE DETAil OF ADJUSTABLE STANCHION(ADS) 20" 12" 12"
o ASTIM B444 GR.1 ASTIM B444 GR.1 24" 12· 12"
SYMBOL & CODING
P/S STD. NO.

SUB- TYPE
SUPr'T SERIAL NO.
PLAN DWG. NO.
REINF.PAD
(IF REO'D)
TRUNNINON
MAT'L
ELEV. "F"
j RF3[0M j IJ
p
1 RF34>009 1

PLAN ISO
REV.
RESTING RF-35
(ADJUSTABLE; TRUNNION TYPE ON F/D) AO
PIPE SIZE •p• PIPE SIZE "p"
"a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION " 1" ILEV "E•
oo oo
N N
5¡1 VENT HOLE
.
. .. . i'
TYPl-F TYPE-P
(ON FOUNDA TION) UP TO 24" (ON PAV1NG)
"a"EQUALS THE
TRUNNION WALL TH'K
ILEV "E•
TRUNNION " 1" TRUNNION " 1"

oo oo
N N
5.i VENT HOLE
ILEV •r ILEV ·r
TYPl-S TYPE-T
( ON FOUNDA TION) PIPE SIZE TRUNNION
(ON PAV1NG) NPS "p" NPS "Q1'
UP TO 24" 1-1/2" 1"
NOTE
2" 1-1 /2"
1. SEE DWG. NO. ST-M-0004 3• 2"
4" 2·
2. MATERIAL 6" 4"
- PLA TE : A36 OR EQ. 10· 6"
12" s"
CODE RUN PIPE TRUNNION "Q1" 3. SEE DWG NO. ST-A4-1032 FOR THE DETAil OF 14" s"
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. EXPANSION ANCHOR BOLT ANO BASE PLA TE(BPLR) 16" 10·
y A335 P11 A335 P11 OR EQ.
4. SEE DWG. NO. ST-M-1023 (3/4) 18" 10·
W A335 P22 A335 P22 OR EQ.
FOR THE DETAil OF ADJUSTABLE STANCHION(ADS) 20· 12·
X A312 TP304, TP316 A312 TP304 OR EQ.
24" 12·
Z A312 TP321 A312 TP321 OR EQ.
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE TRUNNINON
L__--ELEV. "F"
PLAN DWG. NO.
c____ _ _ _ _ ELEV. "E"
PIPE SIZE "p"
PLAN ISO
------ -~- - --------- ----------------~--·----------- ----------- -------------~- - ----- -

REV.
(ADJUSTABLE; TRUNNION TYPE ON F/D) AO

"a"EQUALS lHE
TRUNNION WALL lH'K
TRUNNION "Q1" TRUNNION "Q1"
ILIV "E"
BASE PLATE BASE PLATE

8o
N
ILIV "F"
TYPE-F TYPl-P
"a"EQUALS THE
TRUNNION WALL lH'K
ILIV "E"
51! VENT HOLE

BASE PLATE
oo
N
ILIV "F" ILIV "F"
TYPE-S TYPl-T
(ON FOUNDATION) PIPE SIZE TRUNNION COLUMN
(ON PAVING) NPS "p" NPS "Q1' NPS "Q2'
NOTE
UP TO 24" 1-1/2" 1" 1"
2" 1-1 2" 1-1 2·
3" 2" 2"
4" 2'' 2"
2. MATERIAL 6" 4'' 4"
- TRUNNION "Q1'' : SAME AS RUN PIPE OR MAT'L TABLE. 8" 4" 4"
- COLUMN "Q2'' : API 5L Gr.B OR EQ.
10" 6" 6"
12· 8" 8"
CODE RUN PIPE TRUNNION "Q1"
3. SEE DWG NO. ST-A4-1032 FOR THE DETAil OF 14" 8" 8"
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. EXPANSION ANCHOR BOLT ANO BASE PLATE(BPLR) 16" 10· 10·
y A335 P11 A335 P11 OR EQ.
18" 10· 10"
w A335 P22 A335 P22 OR EQ. 4. SEE DWG. NO. ST-A4-1023 (3/4)
A312 TP304 OR EQ. FOR THE DETAil OF ADJUSTABLE STANCHION(ADS) 20· 12· 12"
X A312 TP304, TP316
z A312 TP321 A312 TP321 OR EQ. 24" 12· 12"
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE TRUNNINON
PLAN DWG. NO. e _ __ _ ELEV. "F"
~----- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
·--------------------------- --- -
REY.
(ADJUSTABLE; TRUNNION TYPE ON F/D) AQ

"a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION "01''
50 VENT HOLE
lln •¡:•
------
BASE PLATE
oo
N ADJUSTABLE STANCHION
x (ADS)
<(
x<(
ó 4-EXPANSION
ANCHOR BOL TS "J" ó
TYPE-F TYPE-P
"a"EOUALS THE
TRUNNION WALL TH'K
5>1 VENT HOLE

oo BASE PLATE
N
x ADJUST ABLE STANCHION

<(
(ADS)
ó 4-EXPANSION
COLUMN "02" ANCHOR BOLTS "J"
lln .,.
TYPl!-S TYPE-T PIPE SIZE TRUNNION COLUMN

NPS "p" NPS "01 NPS "Q2'
1-1/2" 1" 1"
NOTE
2" 1-1 2" 1-1 2"
1. SEE DWG. NO. ST-A4-0004 3" 2" 2"
FOR APPUCA TION OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOAD S. 4" 2'' 2''
2. MATERIAL
6" 4" 4''
- TRUNNION "01" : SAME AS RUN PIPE OR MA T'L TABLE. 8" 4" 4"
- COLUMN "02" : API 5L Gr.B OR EO. 10" 6" 6"
- PLATE : A36 OR EQ. 12" 8" 8"
CODE RUN PIPE TRUNNION "01" 3. SEE DWG NO. ST-A4-1032 FOR THE DETAil OF 14" 8" 8"
K API SL GR.B, A106 GR.B API 5L GR.B OR EQ. EXPANSION ANCHOR BOLT ANO BASE PLATE(BPLR) 16" 10" 10"
y A335 P11 A335 P11 OR EO.
4. SEE DWG. NO. ST-A4-1023(1/4) 18" 10" 10"
w A335 P22 A335 P22 OR EO.
FOR THE DETAil OF ADJUSTABLE STANCHION(ADS) 20" 12" 12"
X A312 TP304, TP316 A312 TP304 OR EQ.
24" 12" 12"
z A312 TP321 A312 TP321 OR EQ.
SYMBOL & CODING

(IF REO'D)
SUB-TYPE
TRUNNINON
SUPP'T SERIAL NO.
MAT'L
PLAN DWG. NO. ~--ELEV. "F"
( JA0-13001)
PIPE SIZE "p" ~----- ELEV. "E"
PLAN ISO
------ ---- --- --- --- - - - - - - ~--·-·--~ ----- ------·--------

RESTING RF-41 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1285 (FOR COLD IN SULA TED PIPE;
TRUNNION TYPE ON F/D) AO
PIPE SIZE "p"

"a"EQUALS THE
TRUNNION WALL TH'K
PIPE SIZE "p"
ELEV "E" _____ ____¡_ _ _ _ _ _
oo TRUNNION "Q1''
"'
URETHANE BLOCK
(URB)
ELEV •r•
TYPE-1' TYPE-S
(ON FOUNDATION) (ON FOUNDATION)
PIPE SIZE "p"

"a"EQUALS THE
TRUNNION WALL TH'K
PIPE SIZE "p"
TRUNNION "01"
ELEV "E" _____ ____¡_' _ _ _ _ _
oo TRUNNION "01"
"'
URETHANE BLOCK
(URB)
ELEV "F"
TYPE-P TYPE-T
(ON PAVING) (ON PAVING)
1. SEE DWG. NO. ST-M-0004 UNIT (mm)

PIPE SIZE NPS U.BLOCK PIPE SIZE NPS U.BLOCK
2. MATERIAL NPS "p" ·01" H1 NPS "p" "01" H1
- TRUNNION : SAME AS RUN PIPE OR MAT'L TABLE. r 8" 117
1-1/2" 104 14"
CODE RUN PIPE TRUNNION 2" 1-1/2" 104 16" 10" 117
K API 5L GR.B, A106 GR.8 API 5L GR.B OR EO. 3" 2" 104 18" 10" 117
L A333 GR.1 OR 6 A333 GR.6 OR EO. 4" 2" 104 20· 12" 117
X A312 TIP304, TP316 A312 TIP304 OR EO. 6" 4" 111 24" 12" 117
N A333 GR.3 A333 GR.3 OR EO. 8" 4" 26"~28"
111 14" 117
3. SEE DWG. NO. ST-M-1020 10" 6" 114 30" 16" 124
FOR THE DETAIL OF URETHANE BLOCK ASSEMBL Y(URB). 12" 8" 117 36" 18" 133
SYMBOL & CODING

(IF REQ'O)
SUB-TYPE
PIPE MAT'L
SUPP'T SERIAL NO. --~
~-- ELEV. "F"
PLAN OWG. NO. - - - - -
~----- ELEV. "E'
PIPE SIZE "p"
PLAN ISO

RESTING RF -42 REV.
(FOR COLD INSULA 1ED PIPE;
TRUNNION TYPE ON F/D) AO

"a"EQUALS THE
TRUNNION WALL TH'K
TRUNNION WALL TH'K
TRUNNION "Q1 • PIPE SI ZE "p"
5~ VENT HOLE - - -"I"

- BLIV --
oo URETHANE BLOCK
N
URETHANE BLOCK
x
(URB) <(
3
COLUMN "Q2"
ILIV "F" ILIV •r•
TYPE-P
"a"EQUALS THE (ON PAVING)
TRUNNION WALL TH'K TRUNNION WALL TH'K
~__'.)· ---- __ ELIY "I"__
oo
N
URETHANE BLOCK
(URB)
COLUMN "Q2"
ILIV "F" ILIV •r
NOTE
AND TRUNNION ALLOWABLE LOADS. 3. SEE DWG. NO. ST-M-1032 UNIT lmm
FOR THE DETAIL OF EXP ANSION
2. MATERIAL PIPE SIZE NPS U.BLOCK PIPE SIZE NPS U.BLOCK
ANCHOR BOL T AND BASE PLA1E(BPLR) NPS "p" "Q1","Q2" H1 NPS "p" "Q1","Q2" H1
- TRUNNION "Q1" : SAME AS RUN PIPE OR MAT'L TABLE. 1-1 /2" 1· 104 8" 117
4. SEE DWG. NO. ST-M-1020 14"
- COLUMN "Q2" : API 5L Gr.B OR EQ. 2· 1-1/2"
FOR THE DETAil OF URETHANE 104 16" 10" 117
- PLA TE : A36 OR EQ. 3•
BLOCK(URB) 2" 104 18" 10" 117
4" 2" 104 20" 12" 117
6" 4" 111 24" 12" 117
8" 4" 111 26ºN28º 14" 117
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
10" 6" 114 30" 16" 124
X A312 TP304, TP316 A312 TP 304 OR EQ.
12" 8" 117 36" 18" 133
SYMBOL & CODING
P/S STD. NO.

SUB- TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO.
REINF.PAD
(IF REQ'D)
PIPE MAT'L
ELEV. "F" j RF4lM j (

p
1 RF42>009 1
PLAN ISO
-----~·----~-------------~-- ------------·----
RESTING RF -43 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1287 (FOR COLO IN SULA TEO PIPE;
ADJUSTABLE, TRUNNION TYPE ON F/D) AO
PIPE SIZE "p" "a"EOUALS THE

TRUNNION WALL TH'K
"a"EOUALS THE
TRUNNION WALL TH'K
l!Ll!V "!!.
-----
º
8o
N
COLUMN "02" COLUMN "02"
EXISTING INSERT PLA TE EXISTING INSERT PLA TE
"a"EOUALS THE
TRUNNION WALL TH'K
"a"EOUALS THE
TRUNNION WALL TH'K
_mv_ "!!·_
8o
N
8o
N
TYPl!-P TYPl!-T
(ON PAVING) (ON PAVING)
PIPE SIZE TRUNNION COLUMN U.BLOCK
NPS •p·· NPS 'Q1' NPS "02' H1
NOTE 1-1/2" 1" 1" 104
2'' 1-1/2" 1-1/2" 104
1. SEE OWG. NO. ST-A4-0004 3. SEE DWG NO. ST-A4-1032 FOR THE DETAil ANO
FOR APPLICA TION OF REINFORCING PAD ANO ALLOWABLE LOADS OF EXPANSION ANCHOR BOL T ANO 3" 2" 2" 104
TRUNNION ALLOWABLE LOAOS. BASE PLA TE(BPLR) 4" 2" 2· 104
2. MATERIAL 4. SEE DWG NO. ST-A4-1023 (4/4) 6" 4" 4" 111
- TRUNNION 'Q1' : SAME AS RUN PIPE OR MAT'L TABLE. FOR THE DETAil OF AOJUSTABLE STANCHION(ADS). 8" 4" 4" 111
- COLUMN "02" : API 5L Gr.8 OR EO. 10" 6" 6" 114
- PLATE : A36 OR EO. 12· 8" 8" 117
COOE RUN PIPE TRUNNION 14" 8" 8" 117
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 16" 10· 10· 117
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 18" 10· 10" 117
X A312 TP304, TP316 A312 TP304 OR EQ. 20· 12" 12· 117
N A333 GR.3 A333 GR.3 OR EO. 24" 12" 12· 117
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUpp'T SERIAL NO.
PLAN DWG. NO. ----~ ~--ELEV. "F"
~----- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
---------·- - --- -- - - - - - - - - - - - - - - - - ---

RESTING RF -46 REV.
ADJUSTABLE, TRUNNION TYPE ON F/D) AQ
PIPE SIZE "p" "a"EQUALS THE PIPE SIZE "p" •a"EQUALS THE
ILBV "l!" ILBV "I!"
oo
N oo
N
ILBV "r"
TYPl!-F TYPl!-P
"a"EQUALS THE "a"EQUALS THE

ILBV "l!"
o
o
N
URETHANE BLOCK oo
N
(URB)
TYPl!-S TYPl!-T PIPE SIZE TRUNNION COLUMN U.BLOCK

(ON FOUNDATION) (ON PAVING)
NPS "p" NPS ·or NPS "02 H1
NOTE 1-1/2" 1" 1" 104
2" 1-1 2" 1-1/2" 104
3" 2" 2" 104
TRUNNION ALLOWABLE LOADS. 3. SEE DWG NO. ST-A4-1032 FOR THE DETAil ANO 4" 2" 2" 104
ALLOWABLE LOADS OF EXPANSION ANCHOR BOL T ANO
6" 4" 4" 111
2. MATERIAL BASE PLA TE(BPLR)
4. SEE DWG NO. ST-A4-1023 (3/4) 8" 4" 4" 111
- TRUNNION "Q1" : SAME AS RUN PIPE OR MAT'L TABLE.
FOR THE DETAil OF ADJUSTABLE STANCHION(ADS). 10" 6" 6" 114
- COLUMN "Q2" : API SL Gr.B OR EQ.
12" 8" 8" 117
14" 8" 8" 117
16" 10" 10" 117
18" 10" 10" 117
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
20" 12" 12" 117
X A312 TP304, TP316 A312 TP304 OR EQ.
24" 12" 12" 117
SYMBOL & CODING

(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
~-- ELEV. "F"
PLAN DWG. NO.----~
~----- ELEV. "E"

PIPE SIZE "p"
PLAN ISO
--~------------- -----~
- - - - - · - - - - - - - - - - - - · · - - ------
RESTING RF -4 7 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1290 (FOR COLO IN SULA TED PIPE;
ADJUSTABLE, TRUNNION TYPE ON F/O) AO
PIPE SIZE "p" "a"EQUALS THE "a'EQUALS THE

ILEV 'T ILEV "I"
(URB) oo
ADJUSTABLE STANCHION _ ~!t:¡:t:Fl!:i N
(ADS) "' --~
COLUMN "02"
ILEV "r"
TYPl!-F TYPl!-P
(ON FOUNOATION) (ON PAV1NG)
"a"EQUALS THE "a"EQUALS THE
TRUNNION WALL TH'K TRUNNION WALL TH 'K
ILEV "I"
o
o
N
oo
"' URETHANE BLOCK oo
URETHANE BLOCK
(URB)
(URB) "'
ADJUSTABLE STANCHION
ADJUSTABLE STANCHION
(ADS)
(ADS)
ILEV "r"
PIPE SIZE TRUNNION COLUMN U.BLOCK

TYPl!-S TYPl!-T NPS "p" NPS "Q1" NPS "02' H1
(ON FOUNDATION) (ON PAVING) 1-1/2" 1· 1" 104
1. SEE DWG. NO. ST-A4-0004 2" 1-1 2· 1-1/2" 104
FOR APPLICATION OF REINFORCING PAD ANO 3• 2·
TRUNNION ALLOWABLE LOAOS. 2' 104
3. SEE DWG NO. ST-A4-1032 FOR THE DETAIL ANO 4• 2· 2' 104
2. MATERIAL ALLOWABLE LOADS OF EXPANSION ANCHOR BOL T ANO 4• 4•
6' 111
BASE PLA TE(BPLR)
- TRUNNION "Ql" : SAME AS RUN PIPE OR MAT'L TABLE.
4. SEE DWG NO. ST-M-1023(1/4) s· 4" 4' 111
- COLUMN "02' : API 5L Gr.B OR EQ. FOR THE DETAil OF ADJUSTABLE STANCHION(ADS). 10" 6" 6' 114
- PLA TE : A36 OR EQ. s· 8"
12' 117
CODE RUN PIPE TRUNNION 14" s· s· 117
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 16' 10· 10· 117
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 18" 10" 10· 117
X A312 TP304, TP316 A312 TP 304 OR EQ. 20· 12· 12· 117
24" 12· 12· 117
SYMBOL & CODING
P/S STD. NO. REINF.PAO

(IF REQ'D)
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO.
~--ELEV. "F"
PLAN DWG. NO. ----~
~----- ELEV. "E"
PIPE SIZE "p"
PLAN ISO
·------------- --~- -·---- ------ ----- ~- -~-- -

REV.
RESTING RS-1
(FOR MUL TI PIPES ON STRUCTURE) AO
._._ _______
A /
2
Pe=/P1 + P,2+ --
'------~
A /
2 2
Pe=/P, + P2 + --
6
ELIV "1ª
MEMBER "M" MEMBER "M"

EXISTING COLUMN EXISTING COLUMN
TYPl!-A
100
,
' 1
1 '
ELIV "I"
El.IV "I"
~ §}
1
MEMBER "M"
1
EXISTING COLUMN '
EXISTING COLUMN
"f!." DETAil "!f DETAil

TYPl!-B
UNIT (mm)
A~ 500 500<A~1000
EQV. PIPE
3/4" A5 80 A7 60
1" A5 80 A7 60
1-1/2" A5 80 A7 60
2· A6 150 A10 140
NOTE 3" A7 280 C12 340
1. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL. 4" A10 560 C12 340
6" C10 880 C15 680
8" C12 1600 C20 1900
SYMBOL & CODING
¡ ?(
R~009
1
P/S sm. NO. ELEV. "E"

SUB-TYPE ' - - - - - DIM "e" 1 1
SUPP'T SERIAL NO. ' - - - - - - - - DIM "A"
(INDICAIT \IHH LARGEST UNE)
PLAN DWG. NO. ' - - - - - - - - EQV.PIPE SIZE "Pe"
PLAN ISO
--~---------·---- ----- ----- ----- ·--------~---- - - - - - - - - - - - - - --·---

REY.
RESTING RS-3
A
1
"11'." 1
Id
1¡1
!LIN ·1·
MEMBER "M"
ri1¡1
11
Id
1¡1
11
Id
EXISTING COLUMN 11
EXISTING COLUMN 1
TYPl-A
A A
10
!LIN "I" !LIN "I"
MEMBER "M" MEMBER "M"

L
TYPl-B
"11'." DETAil "11'." DETAil
UNIT (mm)
As SOO SOO< AS 1000
EQV. PIPE
3/4" AS 80 A7 60
1" AS 80 A7 60
1-1/2" AS 80 A7 60
2" A6 1SO A10 140
3" A7 280 C12 340
NOTE
4" A10 S60 C12 340
6" C10 880 C1S 680
8" C12 1600 C20 1900
SYMBOL & CODING
P /S STO. NO.
SUB-T'rPE ~--- DIM "e"
ELEV. "E"
¡ 1
XR~009
1
SUPP'T SERIAL NO. ' - - - - - - - - DIM "A" (INDICATE 'MlH LARGEST UNE)
PLAN DWG. NO. ~------- EQV.PIPE SIZE "Pe"
PLAN ISO
- - - - - - - - - - - - · - - - - - · - - - - - - - ----- - - - - - - - - - - · - - - - - -..---------- -------

REV.
RESTING RS-5
(FOR MUL TI PIPES ON STIRUCTURE) AO
TYPl-A
(ANGLE, CHANNEL ONL Y) A
A
TYPl-B
"R." DETAil "ft'.' DETAil

UNIT (mm)
EQUIV. A < 500 500 <A'!, 1000 1000 < A <;, 1500 EQUIV. A < 500 500 <A<;, 1000 1000 < A <;, 1500
PIPE a PIPE a
SIZE "M" w "M" w "M" w SIZE "M" w "M" w "M" w
3/4" 6 - - A6 200 A6 140 10" 6 C12 1700 C15 1500 H12 2300
1" 6 - - A6 200 A6 140 12" 6 C12 1700 C15 1500 H12 2300
1-1/2" 6 - - A6 200 A6 140 14" 6 C15 2800 H12 3300 H12 2300
2· 6 - - A7 400 A7 260 16" 6 C15 2800 H12 3300 H12 2300
3" 6 - - A7 400 C12 500 18" 9 C15 2800 H12 3300 H12 2300
4" 6 - - C10 500 C12 500 20" 9 H12 5700 H15 5100 H15 3500
6" 6 C10 950 C12 900 C15 1000 24" 9 H12 5700 H15 5100 H15 3500
8" 6 C10 950 C12 900 C15 1000
NOTE : SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
SUPP'T SERIAL NO.
~--DIM "A"
l 1
XR~009 1 1
(INDICA TE v.lTH LARGEST UNE)

PLAN DWG. NO. ~---- EQV.PIPE SIZE "Pe"
PLAN ISO
REV.
RESTING RS-7
(FOR MULTl PIPES ON STRUClURE) AO
BLIV "I•
EXISTlNG COLUMN
TYPE-B
(ANGLE, CHANNEL ONL Y)
"Jl" DETAil "Ft' DETAil

MEMBER SIZE "M" ANO ALLOWABLE LOAD "W"
UNIT (mm)
EQUIV. A < 500 500 <A~ 1000 1000 <A~ 1500 EQUIV. A < 500 500 <A~ 1000 1000 < A ~ 1500
PIPE a PIPE a
SIZE "M" w "M" w "M" w SIZE "M" w "M" w "M" w
3/4" 6 - - A6 200 A6 140 10" 6 C12 1700 C15 1500 H12 2300
1· 6 - - A6 200 A6 140 12" 6 C12 1700 C15 1500 H12 2300
1-1/2" 6 - - A6 200 A6 140 14" 6 C15 2800 H12 3300 H12 2300
2" 6 - - A7 400 A7 260 16" 6 C15 2800 H12 3300 H12 2300
3" 6 - - A7 400 C12 500 18" 9 C15 2800 H12 3300 H12 2300
4" 6 - - C10 500 C12 500 20" 9 H12 5700 H15 5100 H15 3500
6" 6 C10 950 C12 900 C15 1000 24" 9 H12 5700 H15 5100 H15 3500
8" 6 C10 950 C12 900 C15 1000
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
SUPP'T SERIAL NO.
ELEV. "E"
~--- DIM "C"
' - - - - - - - DIM "A"
¡ 1
XR~0091 •
(INDICA TE 'MTH LARGEST UNE)
PLAN DWG. NO. ~------- EQV.PIPE SIZE "Pe"
PLAN ISO
- - - -·----------------------- ---·--------- -
REV.
RESTING RS-9 ~
(FOR MULTI PIPES ON STRUCTURE) AO

~~
Pe-:4P,' + Pt + --
A
1· ·~"
1· ·¡ ·~·
"lq_ ~ ~!-- - !/~

ELEV
¡
" B
ELEV "I•
• ! "
q
r.... ÁAEMBER "M" r-... ~EMBER "M"
1
::I I t~NGLEt
1 HANN L
~
ONLY)
_A . . ELEV .,. ~ ELEV .,. k

- 1-l_ +
\ 1
~ ~ tl-ít
\
EXISTING BEAM L - 1 1
\
"' Lgf
----
TYPE-! TYPE-B
a
A
·~"
1·
A glB
"I~ !/a
1· · 1 · 1 "if." DETAil
ELEV ,\_-::; ELEV
•
"~EMBER "M" q •
" ~
'
1
1
1
~ /Grnsrn "M" 1
I
::I 1 tfNGLEE
HA~N L
~
1
_A
~
ELEV .,-
~
~
1
1
1
1
.. -
~
av\ "'~
ONLY
ELEV.,.
,,,,j~ -
1
"'
:.
~~
\ \
FOR H-SHAPE
TYPE-C TYPE-D
UNIT lmm)
EQUIV. A< 500 500 < A~ 1000 1000< A~ 15()( 1500 < A~ 200C EQUIV. A < 500 500 < A~ 1000 1000 < A~ 150( 1500 < A~ 200C
PIPE H PIPE H
SIZE
a
(MAX.) "M" w "M" w "M" w "M" w SIZE
a
(MAX.) "fo( w "M" w "M" w "M" w
1000 A5 180 A5 180 - - - - 1000 C15 2200 C15 2100 C15 2000 C15 1650
2" 6 12" 6
1500 A5 130 A5 130 - - - - 1500 H12 3800 H12 3300 H12 3100 H12 2900
3•• 1000 A6 330 A6 330 - - - - 1000 C15 2200 C15 2100 H12 3700 C15 3000
6
- - - -
14" 6
1500 A6 230 A6 230 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 A7 630 A7 630 A7 550 A7 400 1000 H12 5000 H12 4600 H12 3700 H12 3000
4" 6 16" 6
1500 A7 430 A7 430 A7 500 A7 400 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 C10 700 C10 700 C12 1200 C12 1000 1000 - - H12 4600 H12 3700 H12 3000
6" 6 18" 9
1500 C12 850 C12 830 C12 770 C12 650 1500 - - H12 3300 H12 3100 H12 2900
1000 C12 1300 C12 1300 C12 1200 C12 1000 1000 - - H12 4600 H12 3700 H12 3000
8" 6 20· 9
1500 C15 1500 C15 1500 C15 1400 C15 1250 1500 - - H12 3300 H12 3100 H15 4700
1000 C15 2200 C15 2100 C15 2000 C15 1650 1000 - - H15 7500 H15 6000 H15 4800
10· 6 24" 9
1500 C15 1500 C15 1500 H12 3100 H12 2900 1500 - - H15 5300 H15 5000 H15 4700
1000 - - H15 7500 H15 6000 H15 4800
NOTE : SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL. 28",30 9
1500 - - H15 5300 H15 5000 H15 4700
SYMBOL & CODING
P/S sm. NO.

SUB-TYPE
B_S9~-~~-!l<!Q1.-16" -A12~-E18~0-F17000
~ 1 L
1
ELÉV "F"
ELEV "E"
¡ 1
¡ ¿ 1 Rs9l-oo9 I
SUpp'T SERIAL NO. DIM "A" (INDICATE WITH

1 RS9¿009 1
PLAN DWG. NO. EQV.PIPE LARGEST UNE)
SIZE "Pe"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1296 RESTING RS-11

Pe=/P/+ Pl+ --
A
ILIV "I"
1
1~=:::;:::===::::::1;111
!'- ~DJBER ·~.r 1

!"-. ;{EMBER "M"
(ANGLE) 11 1
(CHANNEL)
11 a 1
...... ¡;:¡¡;¡ 1 1
-- -- -- -- ti===t
~
1 1
ILIV "E"
o
"' - l
"ll" DETAil
!"-. ;{EMBER "tJ'
(H-BEAM)
"ll' DETAil
MEMBER SIZE "M" ANO ALLOWABLE LOAD 'W"

UNIT lmm)
EQUIV. A < 500 500 < A ::; 1000 1000 < A ::; 15001500 < A~ 2000 EQUIV. A< 500 500 < A ::; 1000 1000 < A ::; 15001500 < A ::; 2000
PIPE H W ~~ H
SIZE a (MAX.) "M" (~) 'M' (kg) "M" (~) "M" (~) ?~~~ a (MAX.) "M" W
(kg)
"tJ" W
(kg)
"M" W
(kg)
"M" W
(kg)
"Pe' f-'--"-+---+~-+-~+-~t--~+-~-t--~-+-~--t-~-+~--i
1000 AS 180 AS 180 1000 C1S 2200 C1S 2100 C15 2000 C15 16SO
2" 6 12· 6
1SOO AS 130 AS 130 lSOO H12 3800 H12 3300 H12 3100 H12 2900
1000 A6 330 A6 330 1000 C1S 2200 C15 2100 H12 3700 C1S 3000
3" 6 14" 6
1SOO A6 230 A6 230 lSOO H12 3800 H12 3300 H12 3100 H12 2900
1000 A7 630 A7 630 A7 5SO A7 400 1000 H12 SOOO H12 4600 H12 3700 H12 3000
4• 6 16" 6
lSOO A7 430 A7 430 A7 500 A7 400 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 C10 700 C10 700 C12 1200 C12 1000 9 1000 H12 4600 H12 3700 H12 3000
6" 6 18'
lSOO C12 8SO C12 830 C12 770 C12 6SO lSOO H12 3300 H12 3100 H12 2900
1000 C12 1300 C12 1300 C12 1200 C12 1000 9 1000 H12 4600 H12 3700 H12 3000
8" 6 20"
lSOO C1S 1SOO C1S 1SOO ClS 1400 ClS 12SO 1SOO H12 3300 H12 3100 H1S 4700
1000 C1S 2200 C1S 2100 C15 2000 C1S 16SO 9 1000 H1S 7SOO H1S 6000 H1 S 4800
10' 6 24"
1SOO C1S 1SOO C15 1SOO H12 3100 H12 2900 lSOO H1S 5300 H15 SOOO H1S 4700
SYMBOL & CODING
~
~-Qqg-!]O_Q!-J.r-A1250-E18500-DZQQQ
1
L ¡ l
,,,S,,
1
p /S STO. NO. __j ELEV "F"
ELEV "E" 1 1
SUPP'T SERIAL NO. -
DIM "A" 1 RS1{009 1
(INDICATE 'MTH
SIZE "Pe"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1297 (1/2) HANGER RS-12
-y:rr
Pe=/P,2+ P,'+ --
- ¡I
--
-~1- -~·~Jr
,1 , '
IMEMBER "M" ~ ~ •I
! !;'oc_;.,. fsv ~¡ --~ ¡¡
¡ lliV ..,. ~ 6 1:
'T - y - - - - "'~ ~
,¡
e-~~ ,-------------~
f -- " ' EXISTJNG COLUMN
~~F,!
I= F
e-
'
~-
1-J-- -- \ EXISTJNG BEAM -1--f-- -
t;!i OCTAIL
(TYP.) l (TYP.)
ml-B
(ANGLE, CHANNEL ONL Y)
~
[
-ri'nf6 $ ~
iL._::::_______:
A
* 1
----+
~
GI ~I
¡IUV"E"
1
]-~ -
e~
¡:::.
MEMBER "M" ¡_,,,__ ::i:
lliV .,. L 6:_

~~- - - - - - - - - - ~•t::,r=_~--~
1J~--
~1 TYPB-B
]_:~
(ANGLE, CHANNEL ONLY)
MEMBER SIZE V ANO ALLOWABLE LOAD "V(

UNIT (mm)
EQUIV. A < 500 500 <A ~ 1000 1000 < A~ 1500 1500 <A ~ 2000 EQUIV. A < 500 500 <A ~ 1000 1000 < A~ 1500 1500 < A~ 2000
H H
~lzc
PIPE w w w w w w w w
~IZ~ (MAX.) "M"
(kg) "M"
(kg) "M"
(kg) "M"
(kg) (MAX.) "M"
(kg) "M"
(kg) "M"
(kg) "M" (kg)
Pe Pe
1000 A5 340 A6 400 A6 280 A7 450 1000 C12 2000 C15 2100 C15 1830 H12 3100
1"N3H 12·
1500 A5 330 A6 350 A6 250 A7 400 1500 C12 2000 C15 1820 C15 1450 H12 2700
1000 A6 590 A7 650 C10 650 C10 520 1000 C12 2000 C15 2100 H12 3800 H12 3100
4" 14"
1500 A6 570 A7 590 C10 550 C10 400 1500 C12 2000 C15 1820 H12 3300 H12 2700
1000 A7 1100 C12 1300 C12 1150 C12 950 1000 C15 3500 H12 4670 H12 3800 H15 4800
6" 16"
1500 A7 1080 C12 1130 C12 1000 C12 800 1500 C15 3120 H12 4050 H12 3300 H15 4250
1000 C10 1150 C12 1300 C12 1150 C15 1610 1000 C15 3500 H12 4670 H15 5800 H15 4800
8" 18"
1500 C10 1000 C12 1130 C12 1000 C15 1200 1500 C15 3120 H12 4050 H15 5000 H15 4250
1000 C12 2000 C15 2100 C15 1830 C15 1610 1000 - - H12 4670 H15 5800 H15 4800
10" 2o·N24•
1500 C12 2000 C15 1820 C15 1450 C15 1200 1500 - - H12 4050 H15 5000 H15 4250
1000 - - H15 7500 H15 6000 H15 4800
NOTE : SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL. 30"
1500 - - H15 5300 H15 5000 H15 4700
SYMBOL & CODING
P/S STO. NO.

1
__J
RS12_6-~-)lq,Q}-1f-l)250~-QZQQQ
l ¡ L ELEV "F"
¡ 1 l \
SUB-TYPE ELEV "E" 1 RS12A-009 J

SUPP'T SERIAL NO. - DIM "A" 1 Rs1l-009 ¡ (INDICA TE 'M TH
SIZE "Pe"
PLAN ISO
----------------
REV.
PIPING SUPPORT STANDARD DWG. ST-M-1297 (2/2) RESTING RS-1 3
(FOR MULTl PIPES ON STRUCTURE) AO
EQUIVALENT PIPE SIZE 'Pe'
Al 2
Pe=fP, + p,'+ --
- - ~ MEMBER ·~r -
EXISTlNG BEAM
Al 2
Pe=fP, + P/+ --
- .__ ""' MEMBER "M" -

EXISTlNG BEAM
UNIT (mm)
A < 500 500<A~1000 1000 <A !::1500 A < 500 500 <A ~1000 1000<A!::1500 1500< A !::2000
EQUIV. EQUIV.
PIPE PIPE
SIZE MEMBER ALLOW. MEMBER ALLOW. MEMBER ALLOW. SIZE MEMBER ALLOW. MEMBER ALLOW. MEMBER ALLOW. MEMBER ALLOW.
"Pe" SIZE "M" LOAD(kg) SIZE "M" LOAD(kg) SIZE "M" LOAD(kg) "Pe" SIZE "M' LOAD(kg) SIZE "M" LOAD(kg) SIZE "M" LOAD(kg) SIZE "M" LOAD(kg)
2" A5 400 A5 200 A5 150 14" C12 5000 C12 2400 C15 2800 C15 2000
3" A5 400 AS 200 A6 250 16" C15 8000 C15 4000 C15 2800 C15 2000
4" A6 800 A6 400 A7 500 18" C15 8000 C15 4000 C15 2800 C15 2000
6" A7 1400 A7 700 A7 500 20· C15 8000 C15 4000 H12 5000 H12 4000
8" A7 1400 A7 700 C12 1500 24" H12 15000 H12 8000 H12 5000 H12 4000
10· C10 2800 C10 1400 C12 1500
12" C10 2800 C10 1400 C15 2800
N.QJI : SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
l ~
g" - Aill.Q-E_185QQ
p /S STO. NO. __J
1 !§1)-QOJl-Ll_O_Q} -
¡ L
1
ELEV "E"
¡ 1
~---- DIM "A" 1 Rs1loog 1

SUPP'T SERIAL NO. - 1 R¿-009 1 (INDICA TE 'MTH
~------ EQV.PIPE
LARGEST UNE)
PLAN DWG. NO. SIZE "Pe"
PLAN ISO
REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1298 RESTING RS-1 4
(FOR MUL TI PIPES ON STRUCTIJRE) AO
!/ Pe=fP,2+ P,'+ --
!
-t~~
1 J' I "11'_"
ILIV "I!"
--r- 1¡]_
'
f.;;
1
¿ J
'
/ MEMBER "M" I 11 J / MEMBER "M" :r
(ANG~ ~,_r._6.- - =ILIV= - -.,.-=- r-L*'~!IF! =I::!:::=fj_

1
' ( CHANNEL. 6
1
'
1 H-BEAM) ~ ~ ~ l( 1L1V "r"
1 \ 1
' EXISTING COLUMN / / ' EXISTING COLUMN /
(TYP.) (TYP.) --
_lf--1-'
1 1
-4---- I
TYPI!-!
Lt--- 1
! ! "f." DETAil
-~~-®-~
11/f---_.....,.,;...__..___
\ ,.
~.-......
m
IMEMBER "M"
(ANGLE)~
/ 1k 6
ILIV "I!"
:r
m
I¡11
~Yí ,hv-
-- ,,'i)/ ~
l.1
\'
1·,i°'
11
j
¿
MEMBER "M"
(CHANNEL.
H-BEAM)
-®- - ~
55
/
g ILIV "I!"
6
l!Ll!V "r"
:r
1.1 ~......- ILIV..,. I 1'

111
1¡1
..
1¡1 -
f f
11 11
+-- ~
lol
¡ 1¡1
11
lol
,~, -+---
TYPl!-B
MEMBER SIZE "M" AND ALLOWABLE LOAD "W" UNIT (mm)

EQUIV. A < 500 500 <A ~ 1000 1000 < A~ 1500 1500 <A~ 2000 EQUIV. A < 500 500 <A ~ 1000 1000 < A~ 1500 1500 < A~ 2000
H H
~\~
Pe
(MAX.) "M" w
(kg) "M" w
(kg) "M" w
(kg) "M" w
(kg) ~\~~
Pe
(MAX.) "M" w
(kg) "M"
(kg)
w "M"
(kg)
w "M" w
(kg)
1000 A5 340 A6 400 A6 280 A7 450 1000 C12 2000 C15 2100 C15 1830 H12 3100
1"N3" 12"
1500 A5 330 A6 350 A6 250 A7 400 1500 C12 2000 C15 1820 C15 1450 H12 2700
1000 A6 590 A7 650 ClO 650 C10 520 1000 C12 2000 C15 2100 H12 3800 H12 3100
4" 14"
1500 A6 570 A7 590 ClO 550 C10 400 1500 C12 2000 C15 1820 H12 3300 H12 2700
1000 A7 1100 C12 1300 C12 1150 C12 950 1000 C15 3500 H12 4670 H12 3800 H15 4800
6" 16"
1500 A7 1080 C12 1130 C12 1000 C12 800 1500 C15 3120 H12 4050 H12 3300 H15 4250
1000 C10 1150 C12 1300 C12 1150 C15 1610 1000 C15 3500 H12 4670 H15 5800 H15 4800
8" 18"
1500 C10 1000 C12 1130 C12 1000 C15 1200 1500 C15 3120 H12 4050 H15 5000 H15 4250
1000 C12 2000 C15 2100 C15 1830 C15 1610 - -
2o·N24• 1000
H12 4670 H15 5800 H15 4800
10"
1500 C12 2000 C15 1820 C15 1450 C15 1200 1500 - - H12 4050 H15 5000 H15 4250
NOTE : SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
RS14~-Q.01-LlQQ1-1f-~22Q-~-F17000
~
1
l l
J
P/S STD. NO.

SUB-TYPE
_J ¡ L ELEV "F"
ELEV "E"
1
J RS1J-oo9 J
SUPP'T SERIAL NO. - DIM "A" RS¿-009
J J (INDICA TE 'M TH
SIZE "Pe"
PLAN ISO

RESTING RS-17 -
REV.

EXISTING BEAM
k~W'·l llD , .
-+
/ 1 /
-, J +
= -t = -t
I
/~
a
"MEMBER
/($GLE~
~F
a 1
"M" 11
1
1
1
i
i
1
I
-~
'MEMBER
(C~NE~BEA~
.r ,....
i
1
1
llD "r"
1 llD "r"
....
1
1 i;
10. - 1
1
L.L
~ r--.... EQUIVALENT PIPE SIZE "Pe"
~
t= -
TYPV 10 ~
A 1. A .1
Pe~P,2 + P,'+ -- TYPI-!
/ llD , .
Il
/ llD , .
, . --1- 1- = -t ! -t
= -t i ~10<1 r--i ...
1
~J "" .1
/a.Y 1 ~~-, I I O
EXISTING BEAM /
a
I
a *~ MEMBER a"M" -+- -+-
- ~ -($"ir"
1
A 1
..... TYPl-C
10i== -
A
,_ o -
TYPl-B
/
llD , . EXISTING BEAM /
= -t , 100• \ f~~
I
~ '~EMBER "My'
(ANGLE, CHANNEL)
+I A
TYPl-D
.1
i-v-
4- - n
UNIT (mm)
EQUIV. A< 500 500 <A ~ 1000 1000 < A ~ 1500 1500 < A~ 2000 EQUIV. A < 500 500 <A ~ 1000 1000 < A~ 1500 1500 < A ~ 2000
PIPE H PIPE H
SIZE
a
(MAX.) "M" w "M" w "M" w "M" w SIZE
a
(MAX.) "M" w "M" w "M" w "M" w
1000 AS 180 AS 180 - - - - 1000 C15 2200 C15 2100 C15 2000 C15 1650
2" 6 12" 6
1500 A5 130 A5 130 - - - - 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 A6 330 A6 330 A7 550 A7 400 1000 C15 2200 C15 2100 H12 3700 C15 3000
3" 6 14" 6
1500 A6 230 A6 230 A7 500 A7 400 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 A7 630 A7 630 A7 550 A7 400 1000 H12 5000 H12 4600 H12 3700 H12 3000
4" 6 16" 6
1500 A7 430 A7 430 A7 500 A7 400 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 C10 700 C10 700 C12 1200 C12 1000 1000 H12 5000 H12 4600 H12 3700 H12 3000
6" 6 18" 9
1SOO C12 850 C12 830 C12 770 C12 650 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 C12 1300 C12 1300 C12 1200 C12 1000 1000 H12 5000 H12 4600 H12 3700 H12 3000
8" 6 20· 9
1500 C15 1500 C15 1500 C15 1400 C15 1250 1500 H12 3800 H12 3300 H12 3100 H15 4700
10" 6
1000 C15 2200 C15 2100 C15 2000 C15 1650
24" 9
1000 H12 so oo H15 7500 H15 6000 H15 4800
1500 C15 1500 C15 1SOO H12 3100 H12 2900 1500 H12 3800 H15 5300 H15 5000 H15 4700
SYMBOL & CODING

j RS17A-009-1300H6"-A1250-8300-E18500-F17000 j
P/S STO. NO.__j

SUB-TYPE
SUPP'T SERIAL NO. -
¡ LELEV "F"
ELEV "E"
DIM "B"
¡ 1 ! ¿:(
RSl~-009
j 1
(INDICA TE WITH
PLAN DWG. NO. DIM "A" j RS?A-009 I LARGEST UNE)
EQV.PIPE
SIZE "Pe"
PLAN ISO ISO
----------------------------------------------
REY.
RESTING RS-1 9
(FOR MUL11 PIPES ON STRUCTURE) AO
EXISTING BEAM
(TYP.)
:" ..... ) ,.
~ ~
'
ovY'! l 1 "-. MEMBER V
11 1:
! /(CHANNEL, H-BEAM)
4 -E%
10~
llEV "1"
r-~ "w-<TYP~ ~
-.....
llEV "1"
10 FL :
L---~=-------- ·;
11
1--l
1
le:
A 2
Pe=/P1 + P,'+ --
A .1
• . • + +
~· ''lí'
11
11
a 11
11
'MEMBER " M r 11
(CHANNEL, H-BEAM) 11
11
11
llEV "1" 4~ 11
11
4F"
10F- 1. A .1
-
__IL
-1r
....1L

UNIT (mm)
EQUIV. A< 500 500 < A s 1000 1000 < As 15001500 < As 200( EQUIV. A< 500 500 < A s 1000 1000 < A s 15001500 < As 2000
PIPE H PIPE H
SIZE
"Pe"
a (MAX.) "M"
(kg)
W
"M" (~) "M" (~) "M • (~) ~~~~ a (MAX.) V W
(kg)
"M" W
(kg)
"M" W
(kg)
"M" W
(kg)
f-'-"--+---+--+---+--+---+---f---+---+---+---1
1000 A5 180 AS 180 1000 C15 2200 C15 2100 C15 2000 C15 1650
2" 6 12· 6
1500 A5 130 A5 130 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 A6 330 A6 330 A7 550 A7 400 1000 C15 2200 C15 2100 H12 3700 C15 3000
3" 6 14" 6
1500 A6 230 A6 230 A7 500 A7 400 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 A7 630 A7 630 A7 550 A7 400 1000 H12 5000 H12 4600 H12 3700 H12 3000
4• 6 16" 6
1500 A7 430 A7 430 A7 500 A7 400 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 C10 700 C10 700 C12 1200 C12 1000 1000 H12 5000 H12 4600 H12 3700 H12 3000
6" 6 18" 9
1500 C12 850 C12 830 C12 770 C12 650 1500 H12 3800 H12 3300 H12 3100 H12 2900
1000 C12 1300 C12 1300 C12 1200 C12 1000 1000 H12 5000 H12 4600 H12 3700 H12 3000
8" 6 20· 9
1500 C15 1500 C15 1500 C15 1400 C15 1250 1500 H12 3800 H12 3300 H12 3100 H15 4700
1000 C15 2200 C15 2100 C15 2000 C15 1650 1000 H12 5000 H15 7500 H15 6000 H15 4800
10· 6 24" 9
1500 C15 1500 C15 1500 H12 3100 H12 2900 1500 H12 3800 H15 5300 H15 5000 H15 4700
SYMBOL & CODING

~-.Q~-!_3@-1~-E~-!3QQ-.Q_8~-f!.ZQQQ
~
1
__J L ¡ ¡
RSl~-009
P/s sm. No. mv "F" 1
SUPP'T SERIAL NO. - ~--ELEVT 1 [

~----DIM "B" 1 RS&A-009 I
(INDICA TE WITH
PLAN DWG. NO. - - - - - - - ' LARGEST UNE)
EQV.PIPE ~------DIM "A"
SIZE "Pe" PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-M-1301 RESTING RS-22
·~
~
MEfJBER "M"
~ruJ :e :e
$ lllV.,. lllV .,.
2
A EQUIVALENT PIPE SIZE "Pe"
Pe;/P,2+ P,'+ --
~ :e :e
lllV.,. lllV .,...
~ 2
A 1 TYP!-B
TYP!-C
-- MEMBER SIZE "M" ANO ALLOWABLE LOAD "W" TYP!-D
UNIT (mm)
EQUIV. A< 500 tiOO <As 1000 000< As 1500 ~500 <As 200C EQUIV. A< SOO 500 <As 1000 1000< As 1SOO 500 < As 2000
H H
P/~t (MAX. "M" w "M" w "M" w "M" w ~l~t (MAX. "M" w "M" w "M" w "M" w
~Pe (kg) (kg) (kg) (kg)Pe (kg) (kg) (kg) (kg)
1•N3• 1000 AS 340 A6 400 A6 280 A7 450
12·
1000 C12 2000 C15 2100 C1S 1830 H12 3100
1SOO AS 330 A6 350 A6 250 A7 400 1SOO C12 2000 C15 1820 C1S 1450 H12 2700
1000 A6 S90 A7 6SO C10 650 C10 520 1000 C12 2000 C15 2100 H12 3800 H12 3100
4" 14"
1500 A6 570 A7 590 C10 550 C10 400 1500 C12 2000 C15 1820 H12 3300 H12 2700
1000 A7 1100 C12 1300 C12 11SO C12 950 1000 C15 3500 H12 4670 H12 3800 H15 4800
6" 16"
1500 A7 1080 C12 1130 C12 1000 C12 800 1SOO C15 3120 H12 4050 H12 3300 H1S 4250
1000 C10 1150 C12 1300 C12 1150 C15 1610 1000 C15 3500 H12 4670 H15 5800 H15 4800
8" 18"
1500 C10 1000 C12 1130 C12 1000 C15 1200 1500 C15 3120 H12 4050 H1S 5000 H15 42SO
1000 C12 2000 C15 2100 C15 1830 C15 1610 1000 - - H12 4670 H15 5800 H15 4800
10" WN24'
1500 C12 2000 C15 1820 C15 1450 C15 1200 1500 - - H12 4050 H1S 5000 H15 4250
NOTE : SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
P/S STO. NO.

SUB- TYPE ---'
SUPP'T SERIAL NO.
'-----ELEV "E"
'-------DIM "8"
1 ¡ ¿RS2~-009
1 I
PLAN DWG. NO. - - - - - - D I M "A" (INDICA TE l'llTH

LARGEST UNE)
--------EQV.PIPE
SIZE "Pe" PLAN ISO
-----------------------------------------------------
REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1302 RESTING RS-23
(FOR MULTl PIPES ON STRUCTURE) AO
..._ c-1
,...._ r--/
V
EXISTlNG COLUMN
(TYP.)
EXISTlNG BEAM 1l n- 1
r-t-~ uv "I"
+ +
1
(TYP.)
MEMBER "M" ¡
i
(ANGLE)i~~ I 1 i
L • 6
i i
./6v* UV"r"
:i:
j
i
i
~ =j cor i
-- '-' ,...._
1. ~~Iº
TYPl!-A
\ EQUIVALENT PIPE SIZE "Pe"
2
Pe=/P, + P,'+ --
-+ --4-1 1
A
f-------
TYPl!-B
1-rln- 1 --r-t--~
,.,
11\
............r.
l
.EaW',-f
+
1
¡ +1
i!!
!11
MEMBER
(CHANNEL,
"M"
~ ~
111
\1'¡'i~-BEAM)
1
6
i ~ 6 :i:
% -E%- \ uv .,.
,:fi
,:1:
'-¡!¡,,, (¡ ' - _J
- ,,
,,
-Jp_ . .1 7
TYPl-C TYPl-D
MEMBER SIZE "M" ANO ALLQWABLE LOAD "W" UNIT (mm)
EQUIV. A < 500 500 < A ~ 1000 1000 < A ~ 1500 1500 < A ~ 2000 EQUIV. A < 500 500 < A~ 1000 1000 < A ~ 1500 1500 < A~ 2000
PIPE H PIPE H
w w "M" w "M" w "M" w ·~.( w "M" w "M" w
~IZ~
Pe
(MAX.) "M"
(kg) "M"
(kg) (kg) (kg) ~~~~ (MAX.)
(kg) (kg) (kg) (kg)
1000 AS 340 A6 400 A6 280 A7 450 1000 C12 2000 C15 2100 C15 1830 H12 3100
1"N3n 12·
1500 AS 330 A6 350 A6 250 A7 400 1500 C12 2000 C15 1820 C15 1450 H12 2700
1000 A6 590 A7 650 C10 650 C10 520 1000 C12 2000 C15 2100 H12 3800 H12 3100
4• 14"
1500 A6 570 A7 590 C10 550 C10 400 1500 C12 2000 C15 1820 H12 3300 H12 2700
1000 A7 1100 C12 1300 C12 1150 C12 950 1000 C15 3500 H12 4670 H12 3800 H15 4800
6" 16"
1500 A7 1080 C12 1130 C12 1000 C12 800 1500 C15 3120 H12 4050 H12 3300 H15 4250
1000 C10 1150 C12 1300 C12 1150 C15 1610 1000 C15 3500 H12 4670 H15 5800 H15 4800
8" 18"
1500 C10 1000 C12 1130 C12 1000 C15 1200 1500 C15 3120 H12 4050 H15 5000 H15 4250
1000 C12 2000 C15 2100 C15 1830 C15 1610 1000 - - H12 4670 H15 5800 H15 4800
10" 2o·N24"
1500 C12 2000 C15 1820 C15 1450 C15 1200 1500 - - H12 4050 H15 5000 H15 4250
NOTE : SEE OWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
SYMBOL & CODING
~~-QOJ-!lO.Ql-1~ -~2-~H_3QQ-~-filQQQ.
XRS2~009
J
p /Ssm. NO. _J r
~
' L ELEV "F" l 1 ¡
RS~A-009
SUB- TYPE ELEV "E"
SUPP'T SERIAL NO. DIM "8" i 1
1 I (INDICA TE WITH
PLAN OWG. NO. DIM "A"
LARGEST UNE)
~------- EQV.PIPE
SIZE "Pe" PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-M-1303 (1/2)
RESTING RS-24
(FOR MULTl PIPES ON S1RUCTURE) AO

/ Pe=(P,2+ Pl+ --
A A
(MAX. SOO) (MAX. SOO)
100 /
!ID,. EIDT
6 6
::i::: ::i:::
2-BOLT & NUT 3 4"x4SL

BOL T HOLE !121
EXIST EXIST
!ID.,. EQUIP'T CLIP
!ID.,. EQUIP'T CLIP
40
TYPE-A TYPE-B
UNIT (mm)
EQUIV. H~SOO SOO<H~1000 1000< H ~1SOO
PIPE SIZE MEMEBER ALLOWABLE MEMEBER ALLOWABLE MEMEBER ALLOWABLE
3/4" AS 100 A6 100 A6 80
1· AS 100 A6 100 A6 80
1-1/2" A6 200 A7 180 A7 140
2· A6 200 A7 180 A7 140
3• A7 230 A7 180
"ft' DETAil
4" A7 230 A7 180
NOTE
SYMBOL & CODING
P/S STO. NO.

SUB-TYPE
SUPP'T SERIAL NO.
ELEV. "F"
~--- ELEV "E"
~-----DIM "A"
~ 1
X 1RS),-0091
PLAN DWG. NO. ~------EQV.PIPE SIZE "Pe" (INDICA TE llHH LARGEST UNE)
PLAN ISO
REV.
RESTING RS-25
(FOR MUL 11 PIPES ON STRUCTURE) AO

-.-----'-~ Pe=/P,'+ P,'+ --
100
EXISTING BEAM EXISTING BEAM
nPl-A nPl-B
UNIT (mm)
EQUIV. H:s;soo SOO<H :s;1000 1000< H:s;1soo
"Pe" "M" LOAD (Kg) "M" LOAD (Kg) ·~t LOAD (Kg)
3/4" AS 100 A6 100 A6 80
"Je." DETAil
1" AS 100 A6 100 A6 80
1-1/2" A6 200 A7 180 A7 140
2" A6 200 A7 180 A7 140
.t!Q.IT
SYMBOL & CODING
P/S STD. NO.

SUB-TYPE
SUPP'T SERIAL NO.
ELEV. T
' - - - - - ELEV "E"
' - - - - - - - DIM "e"
~ 1
XRS~009
1 1
PLAN DWG. NO. - - - - ' ~-------DIM "A" (INDICA TE 'MTH LARGEST UNE)
~-------- EQV.PIPE SIZE "Pe"
PLAN ISO
~------------------------ --------------------··-------~
REV.
RESTING RS-26
ILIV "I• ILIV "I•
6
ILIV T ILIV •r
W (MAX. 200)
~ EQUIVALENT PIPE SIZE "Pe"
Pe=/P,'+ P,'+ --
TYPl-A TYPl!:-B
UNIT (mm)
EQUI. H$500 500<H$1000 1000< H $1500
3/4" A5 100 A6 100 A6 80
r A5 100 A6 100 A6 80
"le." DETAil 1-1/2" A6 200 A7 180 A7 140
2" A6 200 A7 180 A7 140
3" A6 200 A7 180 A7 140
NOTE
SYMBOL & CODING
P/S sm. NO. ELEV "F"

¡ 1
SUB-TYPE ~--ELEV "E"

SUpp'T SERIAL NO. ~---- DIM "B" RS26A-009
~-----DIM "A" (INDICA TE 'MlH LARGEST UNE)
PLAN DWG. NO. ---~
~------ EQV.PIPE SIZE "Pe"
PLAN ISO
REV.
RESTING RS-27
(FOR MULTI PIPES ON STRUClURE) AO
A
(MAX. 1000)
"le."
:r:
ILIV "F" ILIV "F"
TYPK-A TYPK-B
UNIT (mm)
EQUI. H'.S:.SOO SOO<H '.S:.1000
PIPE SIZE MEMEBER ALLOWABLE MEMEBER ALLOWABLE
"Pe" "M" LOAD (Kg) "M" LOAD (Kg)
3/4" AS 90 A6 80
1" AS 90 A6 80
1-1/2" A6 1SS A7 lSO
2" A6 lSS A7 lSO
3" A6 1S5 A7 150
4" A6 155 A7 150
6" A6 155 A7 150
"le." DETAil
8" - - C12 600
10" - - C15 750
12· - - C15 750
16" - - H12 1500
20· - - H15 1500
24" - - H20 1800
NOTE
SYMBOL & CODING
'----ELEV. "F"
¡ 1 ¡
P/S sm. NO.
SUB-TYPE ' - - - - - - - ELEV "E"
RS27A-009
SUPP'T SERIAL NO. ' - - - - - - - D I M "D" 1 R¿A-009 1
PLAN DWG. NO. - - - - - ' ' - - - - - - - - - - DIM "A" (INDICA 1E 'MTH LARGEST UNE)
' - - - - - - - - - - - E Q V . P I P E SIZE "Pe" f - - - - - - - - - + - - - - - - - 1
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-M-1306 RESTING RS-28
:r: :e
MEMBER "M"
EQUIVALENT PIPE SIZE "Pe" ·ie: A

6
A Pe=fP,2+ P,2+ --
(MAX. 1000)
MAX. 1000
TYPl-A TYPl-B
UNIT (mm)
EQÜI. Hs;5oo 500< H:::;1000 1000<H ~1500
3/4" A5 390 A6 135 C10 105
"ft" DETAil 1· A5 390 A6 135 C10 105
1-1/2" A6 660 A7 290 C10 105
2· A6 660 A7 290 C10 105
3" A6 660 A7 290 C10 105
NOTE
SYMBOL & CODING
P/S STD. NO. ELEV "F"

SUB- TYPE ' - - - - ELEV "E"
~---- DIM "B"
RS28A-009
SUPP'T SERIAL NO.
PLAN DWG. NO. - - - - - ' ~-----DIM "A" (INDICA TE 'MTH LARGEST UNE)
~------- EQV.PIPE SIZE "Pe"
PLAN ISO
REY.
RESTING RS-29
(FOR MUL TI PIPES ON STRUClURE) AO
!... Pe=fP + P/+ --

A
(MAX. SOO)
100 (MAX. SOO)
/
ILIV "Iª
:e
2-BOLT & NUT 3 4"x4SL

BOL T HOLE ¡121
ILIV "r" ILIV 'T 40

40
L _____ ~ L _____ ~
TYPE-A TYPE-B
UNIT (mm)
EQUIV. Hs;soo SOO < Hs; 1000
PIPE SIZE MEMEBER ALLOWABLE MEMEBER ALLOWABLE
"Pe" "M" LOAD (Kg) "M" LOAD (Kg)
3/4" AS 90 A6 80
1· AS 90 A6 80
1-1/2" A6 1SS A7 1SO
2· A6 1SS A7 1SO
3" A6 1S5 A7 1SO
"ft' DETAil
!iQIE_
SYMBOL & CODING
P/S sm. NO.

SUB-TYPE
SUPP'T SERIAL NO.
ELEV. "F"
' - - - - - ELEV "E"
~----DIM "A"
l 1
X j RS),-009 j
PLAN DWG. NO. _ _ __ J ~------EQV.PIPE SIZE "Pe" (INDICA TE 111TH LARGEST UNE)
PLAN ISO
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -- --
REV.
RESTING RS-30
cEXIST cEXIST
_.) EQUIP'T CLIP _.) EQUIP'T CLIP
2-BOLT & NUT 3 4"x45L
BOL T HOLE ~21
!LIV "l. 40 !LIV "l.
80
40
!LIV .,. !LIV .,.
"p( "p('.
A
MAX. 500 EQUIVALENT PIPE SIZE "Pe"
Pe=/P/-+ Pl+ --
TYPE-A TYPE-B
UNIT (mm)
EQUIV. H:S:500 500<H :5:1000 1000< H:5:1500
3/4" A5 100 A6 100 A6 80
1· AS 100 A6 100 A6 80
1-1/2" A6 200 A7 180 A7 140
2· A6 200 A7 180 A7 140
3• A7 230 A7 180
"fl" DETAil
4• A7 230 A7 180
NOTE
SYMBOL & CODING
P/S STO. NO.

SUB-TYPE
SUPP'T SERIAL NO.
ELEV. "F"
' - - - - - - - ELEV "E"
~-----DIM "A"
¡ 1
X :RS),-009.
PLAN DWG. NO. ~------ EQV.PIPE SIZE "Pe" (INDICATE 'MTH LARGEST UNE)
PLAN ISO
-----···-------·-- -
REV.
RESTING RS-31 -
1
PIPE SIZE "p" d--
~ i
rr- a
"a"EQUALS THE
PIPE WALL TH'K
~',
,------ -
1
: ¡ i "-+---~--- ~-DY~~-----P-------
!i : ! 1
1 1 !
i 1 ~ : !:
¡ ~
1
50 VENT 1
50 VENT ! 1
HOLE
0 ~~¡ri ~ HOLE º~~ir
N
-1 )
lllV "1"
3 '\'===~N~~~===
7
~
1 1
EXISTING STIEEL
TYPE-E
UNIT (mm)
NPS "p" PIPE A t
1-1/2" 1" 140 6
BASE PLA TlE 2" 1-1 /2" 140 6
NOTE
3" 2'' 140 6
4'' 2" 140 6
6" 4" 160 9
TRUNNION ALLOWABLE LOADS. 8" 4" 160 9
10" 6" 210 12
2. MA TIERIAL 12" 8" 260 12
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA fL TABLE.
14" 8" 260 12
- PLA TlE : A36 OR EQ.
16" 10" 320 12
18" 10" 320 12
K API 5L GR.8, A106 GR.8 API 5L GR.8 OR EQ.
20· 12" 350 12
y A335 P11 A335 P11 OR EQ.
24" 12" 350 12
w A335 P22 A335 P22 OR EQ.
28" 14"
A312 TP 304 OR EQ. 400 16
X A312 TP304, TP316
30" 16" 450 16
z A312 TP321 A312 TP321 OR EQ.
36" 18" 500 22
SYMBOL & CODING
P/s Sm · No ·
SU8-TYPE
f ~~-009-13001-1s"-E185üo-F17500-lr... I
_J e REINF.PAD
(IF REQ'D)
TIRUNNION MAT'L
~ p
SUPP'T SERIAL NO. -
PLAN DWG. NO. ~------
ELEV "F"
ELEV "E'' "p"
PIP SIZE 1 ""-"" 1
1 RS~-009 1
PLAN ISO

RESTING HRs- 3 1 REV.
TRUNNION TYPE ON STRUCTURE) AO
PIPE SIZE "p"
"o "EQUALS THE

PIPE WALL TH'K
"o"EQUALS THE
PIPE WALL TH'K
---~_y _____ _
oo
CXJ
x g
< CXJ
ó 5\ll VENT x
< 5\ll VENT
HOLE ó
HOLE
ILEV .,-
EXISTING STEEL
TYPl-1! TYPI!-T
- --
UNIT (mm)
NPS "p" PIPE A t1
BASE PLATE 1-1/2" r 140 9
2" 1-1/2" 140 9
3" 2· 140 9
4• 2· 140 9
6" 4• 160 16
8" 4" 160 16
1. MATERIAL 10" 5• 210 16
12· 8" 260 20
14" 8" 260 20
API 5L GR.B OR EQ. 16" 10· 320 20
K API 5L GR.B, A106 GR.B
y A335 P11 A335 P11 OR EQ. 18" 10" 320 20
w A335 P22 A335 P22 OR EQ. 20" 12" 350 20
X A312 TP304, TP316 A312 TP 304 OR EQ. 24" 12· 350 20
z A312 TP321 A312 TP321 OR EQ.
SYMBOL & CODING
P/S STO. NO.

SUB-TYPE
SUPP'T SERIAL NO.
PIPE MA T'L
ELEV "F"
i{H
HRS31E-009
y
ELEV "E" HRS31E-009
PLAN OWG. NO. PIP SIZE "p"
PLAN ISO

RESTING RS-32 REV.
PIPE SIZE "p"
"a"EOUALS Tl-IE
PIPE WALL ltl'K
TRUNNION "01"
_ILIY~: ___ _
TRUNNION "01"
oo
COLUMN "02" COLUMN "02"
"'
5>1 VENT 5>1 VENT
HOLE HOLE
El.IV.,.
TYPE-E
~ EXISTING STEEL 3 TYPE-T
UNIT (mm)
NOTE PIPE SIZE NPS BASE PLATE
NPS "p" ·01·:02· A t
1. SEE DWG. NO. ST-M-0004 BASE PLATE
1-1/2" 1· 140 6
TRUNNION ALLOWABLE LOADS. 2" 1-1 /2" 140 6
3" 2" 140 6
2. MATERIAL 4" 2" 140 6
6" 4" 160 9
- COLUMN "02" : API 5L GR.B OR EO.
8" 4" 160 9
- PLATE : A36 OR EO.
10" 6" 210 12
CODE RUN PIPE TRUNNION "01" 12· 8" 260 12
K API 5L GR.B, A106 GR.B API 5L GR.B A106 GR.B 14• 8" 260 12
y A335 P11 A335 P11 OR EQ.
16" 10· 320 12
w A335 P22 A335 P22 OR EQ.
10·
18" 320 12
X A312 TP304, TP316 A312 TP304 OR EO.
20· 12· 350 12
z A312 TP321 A312 TP321 OR EO.
24" 12· 350 12
o ASTM B444 GR.1 ASTM B444 GR.1 OR EO.
A333 GR.6 A333 GR.6 OR EQ. 26"~28" 14" 400 16
L
30" 16" 450 16
3. IF APPLICABLE ALL TRUNNIONS ON SHOP FABRICA TED PIPE 36" 18" 500 22
CAN BE INSTALLED BY Tl-IE SHOP.
SYMBOL & CODING
REINF.PAD
P/S sm. NO. (IF REO'D)
SUB-TYPE TRUNNION MAT'L
SUPP'T SERIAL NO. ' - - - - ELEV "F"
' - - - - - - - - - ELEV "E"
PLAN DWG. NO. ' - - - - - - - - - - PIP SIZE "p"
PLAN ISO
~---------------------------------------~· --------·----

RESTING RS-33 REV.
f---
1 PIPE SIZE "p"
~"o"EQUAl3
~I/
rt-
lHE
PIPE WALL TH'K
-tl-------t---Lt
/
PIPE SIZE "p"
t=='r\-- -,,
r· '
:1· 1X' 1
ELBV "!"
m _i[:~---11-
il 1
oo
1: : S:'
x PLAN
: <(
.2,
591 VENT
/6~
HOLE I""' 1
¿;- I~
m]
N
ELBV .,.
~
1 ~f
EXISTING STEEL
BASE PLATE
UNIT (mm)
PIPE SIZE SUPPORT BASE PLATE B
NPS "p" PIPE A t
NOTE
3• 2· 140 6 33
4• 2· 140 6 45
FOR APPLICA TION OF REINFORCING PAD AND
TRUNNION ALLOWABLE LOADS. 6" 4• 160 9 67
8" 4• 160 9 89
2. MATERIAL 10· 6" 210 12 116
12· 8" 260 12 134
14" 8" 260 12 156
16" 10· 320 12 179
18" 10· 320 12 201
y A335 P11 A335 P11 OR EQ.
20· 12" 350 12 223
w A335 P22 A335 P22 OR EQ.
A312 TP304 OR EQ. 24" 12" 350 12 268
X A312 TP304, TP316
z A312 TP321 A312 TP321 OR EQ. 30" 16" 450 16 335
L A333 GR.6 A333 GR.6 OR EQ. 32" 16" 450 16 357
N A333 GR.3 A333 GR.3 OR EQ. 36" 18" 500 22 402
SYMBOL & CODING
P/S SID.
SUB-TYPE
NO.~
SUPP'T SERIAL NO. -
j RS33~-009-13001-16" -E18500-F17500-Xr /
e REINF.PAD
(IF REQ'D)
TRUNNION MA T'L
ELEV "F" 1
~
RS¡·009 1
p
ELEV "E" / RS31-009 /
PLAN DWG. NO. PIP SIZE "p"
PLAN ISO
RESTING HRS-33 ~
PIPING SUPPORT STANDARD DWG. ST-A4-1312H (TRUNNION TYPE ON STRUCTURE) AQ
(FOR HIGH PRESSURE PIPING)
~J/
1
PIPE SIZE "p"
"a"EQUALS THE
PIPE WALL TH'K
/ ; _ PIPE SIZE "p"

H-
ry-
r~
-;i
--
1
:1· 1X1
-+J-------t---4-
1 1 ---._ _ __
1111
1
1
-----='--ILBV__.,____"I•
-- m •i i"~í~~~
1
1
1 oo
1 ro
1
1
5~ VENT :
HOLE ""' : /6-v-
¿;-~! /
N
t ILBV 'T
1
EXISTING STEEL
BASE PLATE
UNIT (mm)
PIPE SIZE SUPPORT BASE PLATE B
NPS "p" PIPE A t1
3• 2" 140 9 33
4" 2" 140 9 45
NOTE 6" 4• 160 16 67
8" 4" 160 16 89
1. MATERIAL
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MA T'L TABLE. 10" 6" 210 16 116
- PLATE : A36 OR EQ. 12" 8" 260 20 134
CODE RUN PIPE SUPPORT PIPE 14" 8" 260 20 156
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 16" 10" 320 20 179
y A335 P11 A335 P11 OR EQ.
18" 10· 320 20 201
w A335 P22 A335 P22 OR EQ.
20· 12" 350 20 223
X A312 TP304, TP316 A312 TP304 OR EQ.
z A312 TP321 A312 TP 321 OR EQ. 24" 12" 350 20 268
SYMBOL & CODING
P/S STO. NO._J

SUB- TYPE
SUPP'T SERIAL NO. -
PLAN DWG. NO.
1
=_j'
~s.-009-13001-1f-mººº--w~-1$.
' - - - - ELEV "F"

~---- ELEV "E"
~------ PIP SIZE "p"
L
PIPE MA TL
I
. r
HRS33E-009 1
~ \
i HRS33E-009 1
PLAN ISO
REY.
RESTING RS-41
(FOR COLO INSULA TED PIPE,
TRUNNION TYPE ON STRUCTURE
AO
PIPE SIZE "p"

"a"EQUALS THE
PIPE WALL Tl-l'K a
PIPE SIZE "p"
ILIV "I•
oC>
5!1 VENT HOLE N
5!1 VENT HOLE
ILIV 'T
EXISTING STEEL
URETHANE BLOCK
nPl!-1! nPl!-T
(URB)
UNIT (mm)
PIPE SIZE SUPPORT
NPS "p" PIPE H1
1-1/2" r 104
NOTE 2" 1-1/2" 104
1. SEE DWG. NO. ST-A4-0004 3" 2" 104
FOR APPLICATION OF REINFORCING PAD AND 4" 2" 104
TRUNNION ALLOWABLE LOADS. 6" 4" 111
2. MATERIAL 8" 4" 111
- FOR SUPPORT PIPE : SAME AS RUN PIPE OR MAT'L TABLE. 10" 6" 114
CODE RUN PIPE TRUNNION 12" 8" 117
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 14" 8" 117
L A333 GR.1 OR 6 A333 GR. 6 OR EQ. 16" 10" 117
X A312 TP304, TP316 A312 TP304 OR EQ. 18" 10" 117
N A333 GR.3 A333 GR.3 OR EQ. 20· 12" 117
24" 12" 117
26"~28" 14" 117
FOR THE DETAil OF URETHANE BLOCK ASSEMBLY(URB) 30" 16" 124
36" 18" 133
SYMBOL & CODING
REINF.PAD
P/S sm. NO. (IF REQ'D)
SUB-TYPE TRUNNION MAT'L
SUPP'T SERIAL NO. ~-- ELEV "F"
PLAN DWG. NO. ---~ ' - - - - - - ELEV "E"
~------ PIP SIZE "p"
PLAN ISO
RESTING RS-42 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1314 (1/3) (FOR COLD INSULATED PIPE, AQ
TRUNNION TYPE ON STRUCTURE)
"a"EOUALS TI-IE
PIPE WALL TI-l'K "a"EOUALS TI-IE
PIPE WALL TI-i'K
TRUNNION "01" !LEV. "¡·
TRUNNION "01"
50 VENT HOLE o
o
N
50 VENT HOLE
oo
N
COLUMN "02"
!LEV. .,.
TYPl-1
- --
~EXISTING STEEL~ TYPl-T
UNIT (mm)
PIPE COLUMN "02"
PIPE SIZE NPS BASE PLATE U.BLOCK
NPS "p" ·01·:02· A t H1
1-1/2" 1· 140 6 104
2· 1-1 /2" 140 6 104
NOTE
3• 2· 140 6 104
1. SEE DWG. NO. ST-A4-0004 4• 2' 140 104
6
FOR APPLICATION OF REINFORCING PAD ANO
TRUNNION ALLOWABLE LOADS. 6" 4• 160 9 111
8" 4• 160 9 111
2. MATERIAL
10· 6' 210 12 114
- TRUNNION '01" : SAME AS RUN PIPE OR MAT'L TABLE.
- COLUMN "02" : API 5L GR.B OR EQ. 12· 8" 260 12 117
- PLA TE : A36 OR EQ. 14' 8' 260 12 117
16" 10· 320 12 117
K API 5L GR.B, A106 GR.B API 5L GR.B OR EO. 18" 10' 320 12 117
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 20· 12" 350 12 117
X A312 TP304, TP316 A312 TP304 OR EQ. 24" 12· 350 12 117
26"N28" 14' 400 16 117
3. SEE DWG. NO. ST-A4-1020 30" 16" 450 16 124
FOR TI-IE DETAil ANO ALLOWABLE LOAD OF 36" 18" 500 22 133
URETI-IANE BLOCK ASSEMBLY(URB).
SYMBOL & CODING
P/S sm. NO.

SUB- TYPE
SUPP'T SERIAL NO.
PLAN DWG. NO. - - - - - '
REINF.PAD
(IF REO'D)
TRUNNION MA T'L
~-- ELEV "F"
~----- ELEV "E" j
1H
RfuE-009 1
~
RSJE-009 1
' - - - - - - - - - PIP SIZE "p"
PLAN ISO
REV.
RESTING RS-43
(FOR BARE ANO IN SULA TEO RISER PIPE) AO
A
MAX. 1000 MIN. 25
~~~.,,.---------1-------1 PIPE SIZE "p"

l ------------------------
L-
EXISTlNG BEAM PLAN
/ EXISTlNG BEAM
~----
SECTlON
TRUNNION
(TR-2)
1. MATERIAL
UNIT (mm)
PIPE SIZE TRUNNION G
- BOLT/NUT : A307 GR.8-GALV. OR EQ. NPS "p" NPS "Q" e TYPE-A TYPE-8
- TRUNNION "Q" : SAME AS RUN PIPE OR MA T'L TABLE.
3• 2" "T" +80 "T"+165 "T" +190
COOE RUN PIPE TRUNNION "Q1" 4• 2" "T" +90 "T"+175 "T"+200
K API SL GR.B, A106 GR.B API SL GR.8 OR EQ. 3" "T"+100 "T" +185 "T" +210
5"
y A335 P11 A335 P11 OR EQ.
6" 4" "T" +110 "T" +195 "T" +220
w A335 P22 A335 P22 OR EQ.
8" 4" ·r· +135 "T" +220 "T" +245
X A312 TP304, TP316 A312 TP304 OR EQ.
10· 6" "T" +165 "T" +250 "T"+275
z A312 TP321 A312 TP321 OR EQ.
8"
12· "T"+190 "T"+275 "T" +300
2. DIM. "L"=R-~
UNIT (mm)
3. SEE OWG. NO. ST-M-0004 \lhnox (kg)
PIPE "Cl"SIZE "LI" SIZE
FOR APPUCATlON OF REINFORCING PAO ANO TYPE
SIZE A < 500 500 < A< 1000
TRUNNION ALLOWABLE LOAOS.
A 12· & C10 AS 940 280
4. SEE OWG. NO. ST-M-0001
FOR THE SIZE OF SHAPE STEEL. B SMALLER C15 A6 1200 600
SYMBOL & CODING
REINF PAD(IF REQ'D)

TYPE INS. THK "T"
PLAN DWG. NO. - - - - - ' ELEV "E"
PIPE SIZE "p" DIM "A"
PLAN ISO
STANDARD PIPE SUPPORT, 3.607 /32-SD-5100
REV.
RESTING RS-44
(FOR BARE RISER PIPE : U-BOLT TYPE) AO
p
U-BOLT
3mm CLEAR ANCE
(UBT)
1
4 x EXPANSION ANCHOR
BOL T HOLE "h¡i' BOLTS "J"
~
;:f:'.'.~~L::: ------
ªin77T~:m-~~~~~~~~~~~~~~~~~.....J
1 ºº.1. ~!---i.I Wºº
1~. (MAX. 1000)
BASE PLA TE BPLA
PIPE SIZE 'p"
MEMBER "M"
EXISTING
BEAM
11.!V. "!"
BOLT HOLE h¡!
1. MATERIAL
- U-BOLT
UNIT (mm)
A ~ SOO SOO <A< 1000
K APl-SL GR.B, A106 GR.B A30l GR.B
y A33S P11 PIPE SIZE ALLOW. LOAD ALLOW. LOAD
A193-Bl /A194-2H h¡! MEMBER MEMBER
NPS 'p' (kg) (kg)
w A33S P22 A193-Bl /A194-2H 'M' 'M"
Pmax Fmax Pmax Fmax
X A312 TP304, TP316 A320-88/A194-8-
3/4' 11 AS 80 140 Al 60 140
z A312 TP321 A320-88/A194-8
1' 11 AS 80 140 Al 60 140
2. SEE DWG. NO. ST-M-1001/1118 1-1/2" 11 A5 80 330 Al 60 330
FOR THE DETAIL OF U-BOL T 2' 11 A6 150 330 A10 140 330
3' 11 A6 150 330 A10 140 330
EXPANSION ANCHOR BOL T(BPLA).
5. SEE DWG. NO. ST-A4-1255 FOR THE DETAil OF LUG PLATE.
SYMBOL & CODING
PIPE MATERIAL
~ f(~
P/S STO. NO. ELEV. "E"
SUPP'T SERIAL NO.
PLAN DWG. NO.
DIM "A"
PIPE SIZE 'p'
1 l-009 1
1 RS42009 1
PLAN ISO
RESTING RS-61 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1315 (W/MOTHER PIPE) AO
MOTHER PIPE SIZE "p" MOTHER PIPE SIZE "p"
ft 9
fl
10 100 s 1
,___~!~_ ___,""- MEMBER "M" '---__::A:___ __,__ _--=-B_ __..,\ MEMBER "M"
MOTHER PIPE SIZE "p" 4" TO 10"

MOTHER PIPE SIZE "p" MOTHER PIPE SIZE "p"
MOTHER PIPE SIZE "p" 12" TO 32"
UNIT (mm)
MOTHER PIPE DIM. A OR B 500 1000 1600

SIZE
NPS "p" EQUIVALENT MEMBER
PIPE SIZE "Pe" SIZE "M"
11'. DETAil 4" 1-1 /2' ANO SMALLER A6 A7 A10
1. MATERIAL 6" 2" AND SMALLER
- PARTS DIRECTLY ~ELDED TO PIPE : SAME AS RUN PIPE OR MAT'L TABLE. 8"
10"
CODE RUN PIPE PARTS DIRECTLY WELDED TO PIPE
A283 GR.C OR EQ. 12" 3" AND SMALLER
K API 5L GR.8, A106 GR.8
y A335 P11 A387 GR.11 OR EQ. 14"
w A335 P22 A387 GR.22 OR EQ. 16"
X A312 TP304, TP316 A240-304 OR EQ. 18"
z A312 TP321 A240-321 OR EQ. 20"
- OTHERS : A36 OR EQ. 24"
2. MOTHER PIPE UNE SHALL BE UN IN SULATED AND OPERA TED 30"
AT 95ºC AND BELOW. 32"
SYMBOL & CODING
P/S STD. NO.

SUB-TYPE
SUpp'T SERIAL NO.
MOTHER PIPE MAT'L
MOTHER
PIPE SIZE "p"
'-----DIM "8''
¡
1R~-0001
1 ¡
X 1,22,091
PLAN DWG. NO. ----~ ' - - - - - - - D I M "A" (INDICA TI llHH MOiHER PIPE)
'----------EQUIPVALENT
PIPE SIZE "Pe" PLAN ISO
REV.
RESTING RS-64
(W/MOTHER PIPE) AO

Pe=/P,'+ P,'+ --
PIPE SIZE "P2"
U-BOLT U-BOLT
(UBT) (UBT)
'
1
MEMBER "M"
\. e A. .\. B .1
TYPE-A
NOTE
1. MATERIAL
- U-BOLT
K APl-5L GR.B, A106 GR.B A307 GR.B UNIT (mm)
y A335 P11 A193-B7 /A194-2H
DIM. A 500 1000 1500
w A335 P22 A193-B7 /A194-2H MOTHER PIPE
SIZE
X A312 TP304, TP316 A320-B8/A194-8 EQUIVALENT
NPS "p" MEMBER SIZE "M"
z A312 TP321 A320-B8/A194-8 PIPE SIZE "Pe"
- OTHERS : A36 OR EQ. 4• 1-1 /2' ANO SMALLER A6 A7 A10
2. MOTHER PIPE UNE SHALL BE UNINSULA TED AND OPERATED
6" 2" ANO SMALLER
AT 95·c ANO BELOW. 8"
10·
3. SEE DWG. NO. ST-A4-1001 FOR THE DETAil OF U-BOLT(UBT)
12" 3• ANO SM ALLER
4. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL. 14"
16"
18"
20"
24"
SYMBOL & CODING
P/S STO. NO. - - - - '

SLJpp'T SERIAL NO. - - - '
PLAN DWG. NO. _ _ _ _ __J
EQUIVALENT
PIPE MATERIAL "P2"
PIPE SIZE "P2"
~--PIPE MATERIAL "P1"
~---MOTHER
PIPE SIZE "p1•
XRS~009
1 1
PIPE SIZE "Pe" (INDICA TE 'MTH MOTHER PIPE)

~----- DIM "e"
DIM "A" - - - - - - - - - - - ' ~------- DIM "B"
PLAN ISO
REV.
RESTING RS-65
(W/MOTHER PIPE) AO
MOTHER PIPE SIZE •p• MOTHER PIPE SIZE "p"
~ Poo/P(> P > --
11
"p('.
~1 '-___ A=-------ilMEMBER "M"

A B
MOTHER PIPE SIZE "p" 4" TO 1ü"
TYPE-A TYPE-B
"R'.' DETAil
NOTE
1. MATERIAL
- PARTS DIRECTL Y WELDED TO PIPE : SAME AS RUN PIPE OR MA T'L TABLE.
CODE RUN PIPE PARTS DIRECTL Y WELDED TO PIPE

K API 5l GR.8, A106 GR.B A283 GR.C OR EQ. UNIT (mm)
y A335 P11 A387 GR.11 OR EQ. 500 1000 1600
MOTHER PIPE DIM. A OR B
w A335 P22 A387 GR.22 OR EQ.
SIZE
X A312 TP304, TP316 A240-304 OR EQ. NPS "p" EQUIVALENT MEMBER
z A312 TP321 A240-321 OR EQ. PIPE SIZE "Pe" SIZE "M"
2·~4· 1-1 /2' ANO SMAillR A6 A7 A10
6" 2" ANO SMALLER
2. MOTHER PIPE UNE SHALL BE UNINSULA TED ANO OPERATED 8" 1
AT 95ºC ANO BELOW. 10" t
SYMBOL & CODING
P/S SID. NO.

SUB-TYPE
SUPP'T SERIAL NO.
MOTHER PIPE SIZE "p"
' - - - - - DIM "8"
~ Sl-b-K
RS65A-009
' - - - - - - - DIM "A" RS65A-009
PLAN DWG. NO. ' - - - - - - - - - EQV.PIPE SIZE "Pe" Sl-b-K {INDICA TE \\lTH LARGEST UNE)
PLAN ISO
PIPING SUPPORT STANDARD DWG. ST-A4-1318 (1 OF 2)

RESTING RS- 70 REY.
(FOR HORIZONTAL BEND,
TRUNNION TYPE) AO
w PIPE SIZE "p"

u
z
¡';2~
<(--'
'::jo... MIN.25
U::::.
E 135
E""
'°o
Nu...
EXISTING STEEL TYPl-.l TYPl!-B TYPl!-C

"Y-'('
t_ PLAN ·x-x·
w
A PIPE SIZE "p"
u
z MIN.25
¡';2~
<(--'
'::jo...
U::::i;
E 135
E""
'°o
-tiij----;f Frt tI¡ .e 1-l-·1+

Nu.._
~
(AT TOP) (AT BOP)
TYPl-1 TYPl-r
PLAN ·x-x·
w
u MIN.25 PIPE SIZE "p"
z
<(fo:!
r;;¿:'.5
'=Jo...
U::::.
E~
~ c·+-J-IJ..
E""
'°o
~;
Nu.._
(AT TOP)
TYPl!-G TYPl!-B TYPl!-J
PLAN ·x-x·
w A PIPE SIZE "p"
u
z
<(fo:!
r;;¿:'.5
'::jo...
U::::.
E 55
E""
-ye-± j--it-1
'°o
Nu...
- (_y-}--j-
(AT TOP)
' (AT BOP)
TRUNNION "Q"
"Y-Y" TYPl-I TYPl!-L TYPl!-U:
MIN.25 PIPE SIZE "p"
"X-X''
TRUNNION "Q"
PLAN TYPl!-N TYPl!-P TYPl-Q
---------------------------------------
PIPING SUPPORT STANDARD DWG. ST-M-1318 (2 OF 2

REST\NG RS-70 REY.
(FOR HORIZONTAL BENg1
TRUNNION TYPE) AO
MIN.25 PIPE SIZE •p•
MIN.25
PIPE SIZE "p"
CRADLE & GUIDE

(GS-4)
ORIENTATION
N(Oº) ORIENTATION SHOULD BE
-v
TRUNNION MEASURED CLOCKWISE
.llillE ~ FROM PLANT NORTH(Oº) .
1. MATERIAL
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE. W\L/U J E(90º)
- STIFFNER PLATE : A36 OR EQ.
S(180º)
K API 5L GR.B, A106 GR. SAPI 5L GR.B OR EQ.
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
y A335 P11 A335 P11 OR EQ. UNIT (mm
w A335 P22 A335 P22 OR EQ. PIPE SIZE TRUNNION w
X A312 TP304, TP316 A312 TP304 OR EQ. NPS "p" NPS "Q"
z A312 TP321 A312 TP321 OR EQ. 1-1/2" 1" 50
A333 GR.6 OR EQ. 2" 1-1/2" 50
L A333 GR.6
A333 GR.3 A333 GR.3 OR EQ. 3" 2" 50
N
4" 2" 50
o ASTM 8444 GR.1 ASTM B444 GR.1 OR E ¡
6" 4" 50
8" 4"' 50
2. PAD THICKNESS I" : SAME AS RUN PIPE 10" 6" 90
3. THE SHIM PLATE SHOULD BE WELDED ON EXISTNG BEAM 12" 8" 90
AFTER INSTALLATION. 14" 8" 90
16" 10" 90
4. SEE DWG. NO. ST-M-0004 18" 10" 90
FOR APPLICATION OF REINFORCING PAD ANO 20" 12" 90
TRUNNION ALLOWABLE LOADS.
24" 12" 90
SYMBOL & CODING
P/S STO. N .
SUB-TYPE
SUPP'T SERIAL NO.
REINF.PAD
(IF REQ'D)
PIPE MAT'L
INS. THK I"
L
PLAN DWG. NO.--~
PIPE SIZE " p " - - - - - '
~-- (IF REQ'D)
~---- ELEV. "E"

l ,[-0091
DIM "A"-----~ QRIENTATION
(DEGREE) PLAN ISO
RESTING HRs- 7 o REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1318H(1 OF 2) (FOR HORIZONTAL BEND, TRUNNION TYPE) AQ
PIPE SIZE •p•
F
MIN.25
TRUNNION •o• TYPl-A. TYPl-B TYPl-C

PLAN
PIPE SIZE "p"
TRUNNION "Q"
TYPl-I TYPB-L TYPB-)(
TYPB-N TYPl-P
PIPING SUPPORT STANDARD DWG. ST-A4-1318H(2 OF 2

RESTING HRS-70 REV.
(FOR HORIZONTAL 8END. TRUNNION lYPE) AQ
ORIENTATION
=---w
-v
TRUNNION
W\L/U J
N{O") ORIENTATION SHOULD B
MEASURED CLOCKWISE
FROM PLANT NORTH(O").
E(90')
S(180')
.llifil
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE. PIPE SIZE TRUNNION
NPS "p" NPS "Q"
- STIFFNER PLATE : A36 OR EQ.
1-1/2" 1·
CODE RUN PIPE SUPPORT PIPE 2· 1-112·
K API 5L GR.8, A106 GR.8 API 5L GR.8 OR EQ.
3• 2"
y A335 P11 A335 P11 OR EQ.
4• 2·
w A335 P22 A335 P22 OR EQ.
6" 4•
X A312 TP304, TP316 A312 TP304 OR EQ. 4•
8"
zA312 TP321 A312 TP321 OR EQ.
10" 6"
12· 8"
14" 8"
16" 10·
18" 10·
20" 12"
24" 12"
SYMBOL & CODING
P/S STO. N .
PIPE MAT'L
SUB-TYPE
SUPP'T SERIAL NO. INS. THK "f"
~-- (IF REQ'D)
PLAN DWG. NO. - - - - ' HRS70A-009
PIPE SIZE "p'-'----~ ~---- ELEV. "E" HRS70A-009
DIM "A"------~ QRIENTAIION

(DEGREE) PLAN ISO
PIP\NG SUPPORT STANDARD DWG. ST-A4-1319 (1 OF 4)

RESTING RS- 71 REV.
(FOR VERTICAL BEND, TRUNNION TYPE) AO
w PIPE SIZE "p"

u
:z
<
a::
<
w
_J
u
E
.,..,E
N
EXISTING STEEL
TRUNNION "Q"
PIPE SIZE "p"
MIN.25
F
U-BCU GUIDE
GS-8
(AT TOP)
EXISTING STEEL TRUNNION "Q"
t__ TYPl-D TYPl-1 TYPJ-r
w MIN.25 PIPE SIZE "p"
u
:z
<
a::
<
':'::!
u
E
Jj
N
\ EXISTING STEEL /
TYPl-G TYPl-H TYPl-J
t__
PIPE SIZE "p"
w
u
:z
<
a::
F
MIN.25
<
'u:'::i GUIDE
E (GS-6)
Jj
N
TRUNNION "Q"
TYPl-1 TYPl-L TYPl-11
A PIPE SIZE "p"
TYPl-P TYPl-Q
REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1319 (2 OF 4)
RESTING RS-71
(FOR VERTICAL BEND, TRUNNION TYPE) AO
PIPE SIZE •p• !
F
MIN.25
SHO & GUIDE

GS-1
-*P!l!HHi lllV _y
F
CRADLE & GUIDE
(GS-4) \
ORIENTATION
ORIENTA llON SHOULD BE
TRUNNION N(O")
MEASURED CLOCK'MSE
'(~E(90j
1. MATERIAL
S(180")
- TRUNNION & REINF. PAD : SAtJE AS RUN PIPE OR tJA T'L TABLE.
- SllFFNER PLATE : A36 OR EQ.
CODE RUN PIPE TRUNNION UNIT (mm)

K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. PIPE SIZE TRUNNION w
L A333 GR.1 OR 6 A333 GR.6 OR EQ. NPS "p" NPS "Q"
y A335 P11 A335 P11 OR EQ. 1-1/2" 1· 50
w A335 P22 A335 P22 OR EQ. 2· 1-1 /2" 50
A312 TP304, TP316 A312 TP304 OR EQ. 3" 2· 50
X
4" 2· 50
z A312 TP321 A312 TP321 OR EQ.
6" 4• 50
L A333 GR.6 A333 GR.6 OR EQ.
s· 4• 50
N A333 GR.3 A333 GR.3 OR EQ.
10" 6" 90
o ASTIM 8444 GR.1 ASTIM B444 GR.1 OR EQ.
12" 8" 90
2. PAD THICKNESS "T" : SAtJE AS RUN PIPE
14• a· 90
16" 10" 90
3. THE SHltJ PLA TE SHOULD BE WELDED ON 18" 10" 90
EXIST BEAtJ AFTER INSTALLATION. 20· 12" 90
4. SEE DWG. NO. ST-A4-0004 24" 12" 90
FOR APPLICA llON OF REINFORCING PAD AND 32" 16" 90
SYMBOL & CODING
P/S STD. N .
REINF.PAD
(IF REQ'D)
y
~
PIPE tJAT'L )
RS"~009
SUB-TYPE
SLJpp'T SERIAL NO. INS. THK 'í
(IF REQ'D)
PLAN DWG. NO. 9
ELEV. "E" 1 1
PIPE SIZE "p"
DltJ "A" f¡RIENTA~ON
DEGREE PLAN ISO
PIPING SUPPORT STANDARD DWG. ST-M-1319 (3 OF 4)

RESTING RS- 72 REV.
(FOR HORIZONTAL BEND,
TRUNNION TYPE) AO
PIPE SIZE "p"
-------------~JIU!-".!:_
_J (AT t)
TRUNNION "Q" TYPB-A
·x-x·
PIPE SIZE "p"
-------------~-----
~cm.BV"B•
_J (AT t)
TYPB-B
PIPE SIZE "p"
BLIN "B•
r----
TYPB-C
·x-x·
PIPE SIZE "p"
TYPB-1
·x-x·
RESTING RS-72 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1319 (4 OF 4 (FOR HORIZONTAL BEND,
AO
TRUNNION TYPE)
!
:
r
.~j
'-------
INS. TRI "T"
~.<····,,
-- .· . ,--y-~ _"l. --
"<:;:.. '.re/'
_J (AT t)
TRUNNION "Q" TYPE-F
!
MIN.25
PIPE SIZE "p"
: JNS. TBI "T"

:t---
1 ~ ~mv:r __
.... ········ .. ,V
_J (A~,t )
TRUNNION "Q"
ORIENTATION
fülIE N(O") ORIENTATION SHOULD B

1. MATERIAL
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE.
~ FROM PLANT NORTH(O").
- STIFFNER PLATE : A36 OR EQ. W\LIU) -vE(90")

K API 5L GR.B, A106 GR.BAPI 5L GR.B OR EQ. 5(180")
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
y A335 P11 A335 P11 OR EQ. UNIT (mm)
w A335 P22 A335 P22 OR EQ. PIPE SIZE TRUNNION w
A312 TP304, TP316 A312 TP304 OR EQ. NPS "p" NPS "Q"
X
1-1/2" 1" 50
z A312 TP321 A312 TP321 OR EQ.
2" 1-172" 50
N A333 GR.3 OR EQ. A333 GR.3 OR EQ.
3" 2" 50
o ASTM B444 GR.1 ASTM 8444 GR.1 OR E p
4• 2" 50
6" 4" 50
2. PAD THICKNESS "T" : SAME AS RUN PIPE 8" 4" 50
3. THE SHIM PLATE SHOULD BE WELDED ON EXISTNG BEAM 10" 6" 90
AFTER INSTALLATION. 12" 8" 90
14" 8" 90
4. SEE DWG. NO. ST-M-0004 16" 10" 90
FOR APPLICATION OF REINFORCING PAD ANO 18" 10" 90
20" 12· 90
24" 12" 90
SYMBOL & CODING
P/S STO. N .
SUB-TYPE
SUPP'T SERIAL NO.
~--
REINF.PAD
{IF REQ'D)
PIPE MAT'L
INS. THK I"
(IF REQ'D)
L
PLAN DWG. NO.-------' 1 [-009 I
PIPE SIZE "p"----~ ' - - - - - - - ELEV. "E"
DIM "A" _ _ _ _ ____; QRIENTATION
(DEGREE) PLAN ISO
PIPING SUPPORT STANDARD DWG. ST-A4-1319H(1 OF 4)

RESTING HRS-71 REV.
FOR VERTICAL BEND, TRUNNION TYPE)
PIPE SIZE "p"
(AT TOP)
TRUNNION "Q"
A PIPE SIZE "p"

F
MIN.25
EXISTING STEEL TRUNNION "Q"

t__ TYPl-1 TYPl-L TYPJHl
A PIPE SIZE "p"
TYPl-N TYPl-P TYPl-Q

REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1319H(2 OF 4)
RESTING HRS- 71
FOR VERTICAL BEND, TRUNNION T'r'PE)
PIPE SIZE "p" !
MIN.25
SHO & GUIDE

HGS-1
ORIENTA TION
ORIENTA TION SHOULD BE
TRUNNION N(O')
MEASURED CLOCKWISE
>j~E(90)
S(180')
UNIT (mm)
1. MATERIAL
PIPE SIZE TRUNNION
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE. NPS "p" NPS "Q"
- STIFFNER PLA TE : A36 OR EQ. 1-1/2" 1"
CODE RUN PIPE SUPPORT PIPE 2· 1-1 /2"
K API 5L GR.B, A106 GR.8 API SL GR.B OR EQ. 3• 2·
y A335 P11 A335 P11 OR EQ. 4• 2·
w A335 P22 A335 P22 OR EQ. 6" 4"
X A312 TP304, TP316 A312 TP304 OR EQ. 8" 4"
z A312 TP321 A312 TP321 OR EQ. 10· 6"
12" 8"
14" 8"
16" 10"
18" 10"
20" 12"
24" 12"
SYMBOL & CODING
SUB-T'r'PE PIPE MAT'L $. ( )

SLJpp'T SERIAL NO. INS. THK "T"
~-- (IF REQ'D)
PLAN DWG. NO. HRS71A-009
' - - - - - - - - ELEV. "E" HRS71A-009
PIPE SIZE "p"----~
DIM "A"-----~ ORIENTAilON
(DEGREE) PLAN ISO
'-------------------------------------------------------
RESTING HRS-72 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1319H(3 OF 4) (FOR HORIZONTAL BEND, TRUNNION TYPE) AQ
PIPE SIZE "p"
MIN.25
~rBLBV"I•
- - - - - - - - - - - - - ~~ ~ - - - - -
_J (AT t)
TRUNNION "Q' TYPl-A
·x-x·
PIPE SIZE "p"
'
1
'
1
u__¡:::!!~~ ~----1- --------~~-r-

' _J, TRUNNION "Q" (Al <t)
TYPl-D
A PIPE SIZE "p"

MIN.25
TYPl-1
·x-x·
PIPING SUPPORT STANDARD DWG. ST-A4-1319H(4 OF 4

RESTING HRS-72 REY.
FOR HORIZONTAL BEND, TRUNNION lYPE) AQ
J.
------- ~'.'."T"""~: ,:(T~ _-r --

_J (Ar t)
TRUNNION "Q" TYPl-r
PLAN
ORIENTATION
N(O') ORIENTATION SHOULD 8
~
WVJU J -wr FROM PLANT NORTH(O').
E(90')
S(180')
UNIT (mm)
NOTE PIPE SIZE TRUNNION
NPS "p" NPS "Q"
1. MATERIAL 1-1/2" 1•
- TRUNNION & REINF. PAO : SAME AS RUN PIPE OR MAT'L TABLE. 2· 1-1/2"
- STIFFNER PLATE : A36 OR EQ. 3• 2·
CODE RUN PIPE SUPPORT PIPE 4• 2·
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 6" 4•
y A335 P11 A335 P11 OR EQ. 8" 4•
wA335 P22 A335 P22 OR EQ. 10· 6"
X A312 TP304, TP316 A312 TP304 OR EQ. 12· 8"
z A312 TP321 A312 TP321 OR EQ. 14" 8"
16" 10·
18" 10·
20· 12·
24" 12·
SYMBOL & CODING
P/S STO. N .
SUB-TYPE PIPE MAT'L
SUPP'T SERIAL NO. INS. THK "T"
~-- (IF REQ'D)
PLAN DWG. NO.--~
PIPE SIZE " p " - - - - - - - " ~---- ELEV. "E"
DIM "A"------~ QRIENTAJION
\DEGREE) PLAN ISO
L___ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ --- .
REV.
RESTING RS-80
(W/MOTI1ER PIPE) AO
STOPPER LUG
PS-11
ELEV. "E"
PIPE CLAMP
RC
3" TO 12"
NOTE
1. MATERIAL 2. SEE DWG. NO. ST-M-1017 FOR THE DETAil OF PIPE CLAMP.
3. SEE DWG. NO. ST-M-1255 FOR THE DETAil OF STOPPER LUG.
K APL 5L GR.B A105 GR.B A283 GR.C OR EQ. 4. CLAMP MATERIAL
y A335 P11 A387 GR.11 OR EQ. CODE RUN PIPE CLAMP BOLT & NUT
w A335 P22 A387 GR.22 OR EQ. K APl-SL GR.B, A106 GR.B A283 GR.e OR EQ. A307 GR.B OR EQ.
X A312 TP304 TP316 A240-304 OR EQ. y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H
z A312 TP321 A240-321 OR EQ. w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
L A333 GR.I OR 6 A516 GR.60 OR EQ. X A312 TP304, TP316 A240 TP304 OR EQ. A193-B7 /A194-2H
N A333 GR.3 A203 GR.O OR EQ. z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
- BOLT /NUT : A307 GR.B-GALV. OR EQ.
SYMBOL & CODING
P/S SID. NO.
SUPP'T SERIAL NO.
PLAN DWG. NO.

PIPE MATL
ELEV. "E"
PIPE SIZE "p"
~ ~~4RSB~S
PLAN ISO
1
RESTING RV-2 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1321 (1/2) . (FOR BARE AND INSULA TED PIPE,
VESSEL CUP AO
L A B
(MAX. 600)
75
'
1
'
-~ =:J-
I'
2-BOL T & NUTS
PLAN CLIP 101A

FURNISHED BY
VESSEL VENDOR PIPE SIZE "p"
"L" SIZE PIPE SIZE
NPS "p" B
_a
2" & SMALLER 160

Bl.IV. , . o 3• 190
o
4" 210
_a
BOLT HOLE "hll"

SECTION
4" & SMALLER
CLIP CLIP Wmax (kg)

TYPE MARK
a b c h\1 BOLT SIZE "L" SIZE
A ~ 400 400 < A~ 600
A 101 A 30 20 25 18 5/8"x40L A5 75 50
B 101 B 40 35 38 21 3/4"x45L A7 270 180
NOTE
SYMBOL & CODING
CLIP TYPE
SUPP'T SERIAL NO.
ELEV. "E"
~--ORIENTATION
~ ·(~
RV2A-009
PLAN DWG. NO. ---~ (DEGREE)
PIPE SIZE "p" ~----DIM "A" PLAN ISO
RESTING RV-3 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1321 (2/2) (FOR BARE ANO INSULA TED PIPE,
VESSEL CUP AO
A B
(MAX. 800
& '
1
'
1
r--·-
'
i ~
PLAN CLIP 01A B

FURNISHED BY
VESSEL VENDOR PIPE SIZE "p"
"L" SIZE PIPE SIZE
NPS "p" B
.o
2" & SMALLER 160
BLBV. "E• o 3" 190
o
4" 210
.o
BOLT HOLE "h¡1"

SECTION
4" & SMALLER
CLIP CLIP Wmox (kg)

TYPE MARK
o b e hl!I BOLT SIZE "L" SIZE
A ~ 400 400<A~800
A 101 A 30 20 25 18 5/8"x40L A5 75 50
B 101 B 40 35 38 21 3/4"x45L A7 270 180
NOTE
SYMBOL & CODING
CLIP TYPE
SUPP'T SERIAL NO.
ELEV. "E" ~ -(~
RV3A-009
~--ORIENTATION
PLAN DWG. NO. ---~ (DEGREE)
~----DIM "A"
~----·------------------------------------·----·--····--·-
REV.
RESTING RV- 5
(FOR BARE AND INSULA TED PIPE,
VESSEL CLIP AO
L A
tJAX. 700
NORTH
.
1
[j_______ ·c=·
tt;;;ll;it--=---L-..... s=1z_E_____d
! .p 4-BOLT & NUT

.
1
1
SOUTH
PLAN
CLIP 103A B PIPE SIZE "p"

FURNISHED BY
VESSEL VENDOR
BLEV "I•
"[" SIZE
ll 12 'M:LD
TO BRACKET "["
BOL T HOLE "hii!"
SECTION
UNIT (mm)
1. SEE DWG. NO. ST-M-0004 CLIP CLIP Wmax (kg)
FOR APPLICATION OF REINFORCING PAD ANO j h ii! BOLT SIZE "C:"SIZE
TYPE tJARK A ~500 500<A~700
TRUNNION ALLOWABLE LOAOS.
A 103A 100 21 3/4"x50L C10 940 280
2. SEE DWG. NO. ST- M-0001
FOR THE SIZE OF SHAPE STEEL. B 1038 150 21 3/4"x50L C15 1200 600
SYMBOL & CODING
REINF PAD(IF REO'D)

PIPE tJAT'L
INS. THK "T"
PLAN DWG. NO. ' - - - - - Dlt.4. "R"
PIPE SIZE "p" - - - - (OUTSIDE RADIUS)
~----- ELEV "E"
Dlt.4 "A" - - - - - - - - - - - - " ' - - - - - - - - - ORIENTATION
DEGREE PLAN ISO
RESTING RV- 7 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1323 (FOR BARE ANO INSULATED PIPE, AO
VESSEL CLIP
L e
NORTH (MIN. 600, MAX. 1700)
.
1
.
1
D_º u
.9RIEN.L
SOUTH
PLAN
PIPE SIZE "p"
CILP 104A B C
FURNISHEO BY PIPE SIZE "p"
VESSEL VENDOR 50
N.QJI
"[" SIZE
1. MATERIAL
2. DIM "M"=(A+L)-85
DIM "L"=R-Jíf -r::!
3. SEE DWG. NO. ST-M-0004 FOR APPLICATION OF

REINFORCING PAD AND TRUNNION ALLOWABLE LOADS.

::::;: ll 12 WELD TO
BRACKET "e::"
PIPE SIZE
NPS •p• e
SECTION
s· 100
8" 125
10· 150
12" 180
14" 190
16" 220
UNIT (mm) 18" 245
CLIP CLIP Wmax (kg) 20· 270
TYPE MARK j e f g h!ll K BOLT SIZE "e "SIZE "L" SIZE
A ~ 1200 1200 < A ~ 1700 24" 320
A 104A 150 30 60 45 18 42 5/8"x60L C15 A7 4500 4000 26" 350
B 1048 200 45 90 55 21 64 3/4"x60L C20 A7 6500 6500 28" 370
e 104C 300 75 150 75 28 106 1"x65L C30 A7 10500 9000 30" 400
32" 420
SYMBOL & CODING

j RV7~-009-13001-14"-A1250-D135-E18500-R3250 i
P/S STD. N
º·~ l DIM "R"
CLIP TYPE (OUTSIDE RADIUS)
SUPP'T SERIALNO.- ELEV "E"
PLAN DWG. NO. ORIENTATION
PIPE SIZE " p" (DEGREE)
DIM "A"
PLAN ISO
· - - - - - - - - --·
REV.
P\PING SUPPORT STANDARD DWG. ST-M-1324 RESTING RV-21
(FOR BARE RISER PIPE, VESSEL CLIP) AQ
L A
(MAX. 600)
75
_,_____ _
ORIENT
2-BOLT & NUTS
PLAN CLIP 101A

FURNISHED BY
VESSEL VENDOR
STOPPER LUG
(PS-11)
BLIV. "I•
PIPE CLAMP
-"
(PC)
SECTION
4" & SMALLER
CLIP CLIP Wmax (kg)

TYPE MARK
a b e h0 BOLT SIZE "L" SIZE
A ~ 400 400<A~600
A 101 A 30 20 25 18 5/8"x40L A5 75 50
B 101 B 40 35 38 21 3/4"x45L A7 270 180
1. MATERIAL - CLAMP
- LUG PLA TE : SAME AS RUN PIPE OR MA T'L TABLE. CODE RUN PIPE CLAMP BOLT & NUT
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
y A335 P11 A387 GR.11 OR EQ. w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ. z A312 TP321 A240 TP321 OR EQ. A193-B7 /A194-2H
z A312 TP321 A240-321 OR EQ. 2. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
- SHAPE STEEL : A36 OR EQ. 3. DIM. "L"=R-)R' -C
2

4. SEE DWG. NO. ST-A4-1014 FOR THE DETAil OF PIPE CLAMP.
5. SEE DWG. NO. ST-A4-1255 FOR THE DETAil OF STOPPER LUG.
SYMBOL & CODING
P/S STO. NO.

CLIP TYPE
PIPE MAT'L
ELEV. "E"
(l
l,!,.,I ~~i1
SUPP'T SERIAL NO. ORIENTATION
REV.
RESTING RV-23
(FOR BARE RISER PIPE; VESSEL CLIP) AQ
75 40
EQUIVALENT
PIPE SIZE "Pe"
Pe= jp,2 +P/
3mm CLEARANCE
SOUTH
A
(MAX.600)
PLAN
PIPE SIZE "Pe"
10 30
CLIP 01A B
FURNISHED BY
VESSEL VENDOR
ILIV. "I• ~[
2-BOLT HOLE "h~"
SECTION LUG DETAil
Pe=4" & SMALLER
UNIT (mm)
CLIP CLIP A 5. 400 400<A5.600
a b h~ BOLT SIZE "L" SIZE
A 101A 30 20 18 5/8" X 40 AS 75 250 50 170
1. MATERIAL B 1018 40 35 21 3/4" X 45 A7 270 900 180 600
- LUG STOPPER : SEE DWG. NO. ST-A4-1255 (PS-11)
2 2
2. DIM "L"= R-JR -C

4. SEE DWG. NO. ST-M-1001/1178 THE DETAil OF U-BOLT.
SYMBOL & CODING
CLIP TYPE
~---
DIM "R"
(OUTSIDE RADIUS)
ELEV. "E"
rr
~~/1~
SUPP'T SERIAL NO.
~
~----- ORIENTATION
(DEGREE)
PLAN DWG. NO. - - - - - - - '
' - - - - - - - - - DIM "B"
EQV. PIPE SIZE "p" - - - - - ' ~---------DIM "A"
PLAN ISO
·---------------------------------------
REV.
RESTING RV-24
(FOR BARE RISER MULTI-PIPE; l;ESSEL CLIP) AO
L A
(MAX. 1000) U-BOLT
~ EQUIVALENT
PIPE SIZE "Pe"
SOUTH p
PLAN
CLIP #103A/B STOPPER

75 40 LUG.
FURNISHED BY THK.6mm
VESSEL VENDOR
~[
llfi. , .
"[" SIZE
le.12 l'IELD TO BOLT HOLE "h~"

BRACKET T
SECTION LUG DETAil
Pe=12" & SMALLER
UNIT (mm)
1. MATERIAL CLIP CLIP A ~
500 500 <A ~ 1000
j h(ZI BOLT SIZE "[" SIZE "L" SIZE
- LUG STOPPER : TYPE MARK Pmax (kg) Fmax (kg) Pmax (kg) Fmax (kg)
SEE DWG. NO. ST-M-1255 (PS-11) A 103A 100 21 3/4" X 50 C10 AS 170 270 110 260
- SHAPE STEEL : A36 OR EQ. B 1038 150 21 3/4" X 50 C15 A6 390 490 270 480
2. DIM. "L"=R-)R' -c'
3. DIM. "c"=B/2-(C+12)
4. SEE DWG. NO. ST-M-1001/1178 FOR THE DETAil OF U-BOLT.

SYMBOL & CODING
DIM "R"
(OUTSIDE RADIUS)
CLIP TYPE
~--- ELEV. "E"
SUPP'T SERIAL NO. ~-----ORIENTATION
(DEGREE)
PLAN DWG. NO. ---~
~-------DIM
"B"
EQV. PIPE SIZE "p" ----~ ~---------DIM "A" PLAN
RESTING RV-26 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1327 (1/2) (FOR BARE RISER MULTI-PIPE;
VESSEL CLIP) AO
L A
NORTH (MAX. 1000) U-BOLT
1 ~
' j.. . EQUIVALENT
~[
1
' PIPE SIZE "Pe"
1 / Pe= jp~ +P2H --
'
_ti_ ___ u
u
NOTE LUG DETAil
1. MATERIAL
o - LUG STOPPER :
p~ SEE DWG. NO. ST-M-1255 (PS-11)
SOUTH 6-BOLT & NUT - SHAPE STEEL : A36 OR EQ.
- BOLT/NUT: A307 GR.8-GALV. OR EQ.
PLAN 2. DIM "M"=(A+L)-85-230
3. DIM "L"= R-j R'--C 2
CLIP 104A 8 STOPPER
FURNISHED BY LUG. 4. DIM "C"=B/2-(L+12)
85 40 THK.6mm
VESSEL VENDOR 5. SEE DWG. NO. ST-M-1001/1178
FOR THE DETAil OF U-BOLT.
....o 6. SEE DWG. NO. ST-M-0001

o+---- ~~~;r===::;=:r==m;,;;;;r:::;;" 1
"''+-----
ll 12 WELD TO
BRACKET "["
SECTION
ll 12 WELD TO
BRACKET l."
Pe=14" TO 32"
UNIT (mm)
A ~ 1200 1200 <A ~ 1700
CLIP CLIP BOLT
j e f g hl! k "[" SIZE "L" SIZE
A 104A 150 30 60 45 18 42 5/8" X 60 C15 A7 650 2000 250 1580
B 1048 200 45 90 55 21 64 3/4" X 65 C20 A7 1100 2000 450 1700
e 104C 300 75 150 75 26 106 1" X 65 C30 A7 1160 2000 490 1700
SYMBOL & CODING
DIM "R"
(OUTSIDE RADIUS)
CLIP TYPE ELEV. "E"
SUPP'T SERIAL NO. '------ORIENTA TION
PLAN DWG. NO. --~ (DEGREE)
~-----DIM "8"
EQV.PIPE SIZE "Pe"---~ ~-------DIM "A" PLAN

RESTING RV-27 REV.
(FOR INSULA1ED RISER IAULTI-PIPE: VESSEL CLIP) AO
L A
NORTH (MAX. 1000) EQUIVALENT
PIPE SIZE "Pe"
1
1
' TRUNNION "Q"
1 <-.±::::==\
_t\_ __i
(TR-2)
e:¡-
:¡:
L.J
1
~ ~·:!::::== r--i;;oA,.--....L.---"''""---..!.._:_....t.1-.1.,
G G
"[" SIZE
SOUTH
PLAN
CLIP 104A B
FURNISHED BY TRUNNION "Q"
75 40
VESSEL VENDOR
TRUNNION
ILIV. "I" (TR-2)
UNIT (mm)
PIPE SIZE TRUNNION
NPS "p" NPS •q• H G
....o
fl 12 WELD TO 3" 2· ·¡ +80 "1'+165
BRACKET [ 4• 2" ·¡ +90 "1'+175
s· 3" "1+100 "T"+185
SECTION 6" 4• "T" +110 "1'+195
8" 4" "T" +135 "T"+220
Pe=3" TO 12"
10· 6" "T" +165 "T"+250
NOTE 12· 8" "T" +190 "T"+275
1. MATERIAL
- TRUNNION "Q" : SAME AS RUN PIPE OR MAT'L TABLE.
2. DIM. "L"=R-n
UNIT (mm)
CLIP CLIP A ~500 500 <A~ 1000
j h ¡l BOLT SIZE • ["SIZE "L" SIZE
TYPE MARK Pmox (kg) Fmox (kg) Pmax (kg) Fmox (kg)
A 103A 100 21 3/4" X 50 C10 AS 170 270 110 260
B 103B 150 21 3/4" X 50 C15 A6 390 490 270 480
SYMBOL & CODING
P/S STO. NO. - - - '

CLIP TYPE ----~
SUPP'T SERIAL NO. - - - - - ' INS.TI1K "í(IF REQ'D)
PLAN DWG. NO. _ _ _ _ __ J ~--DIM
"R"
(OUTSIDE RADIUS)
EQV.PIPE SIZE "Pe" - - - - - - - - '
DIM "A" _ _ _ _ _ _ _ _ ____, ~---- ELEV. "E"
~------ ORIENTATION
DIM "B" - - - - - - - - - - - - - - - ' (DEGREE)
REV.
RESTING RV-31
(FOR BARE AND INSULATED RISER PIPE,
l/ESSEL CUP AO
A
MAX. 1000 MIN. 25
PIPE SIZE "p"
CLIP 103A
FURNISHED BY
l/ESSEL l/ENDOR
ILIV "E•
12 WELD
11'_
TO BRACKET " ["
BOLT HOLE "h¡l"
SECTION
TRUNNION
(TR-2)

PIPE SIZE TRUNNION G
- SHAPE STEEL : A36 OR EQ. NPS "p" NPS "Q" c TYPE-A TYPE-8
- 80LT/NUT: A307 GR.8-GALV. OR EQ. 2·
3• ·r +80 ·r +165 "T"+190
4• 2· "T"+90 "T"+175 "T" +200
CODE RUN PIPE TRUNNION "Q1" 5• 3" "T" +100 "T"+185 "T"+210
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 4•
6" "T"+110 "T"+195 T+220
y A335 P11 A335 P11 OR EQ.
8" 4• T+135 ·r+220 "T"+245
w A335 P22 A335 P22 OR EQ.
10· 6" "T"+165 "T"+250 ·r +275
X A312 TP304, TP316 A312 TP304 OR EQ.
12· 8" "T"+190 "T"+275 T+300
z A312 TP321 A312 TP321 OR EQ.
2. DIM. "L"=R-n
UNIT (mm)
3. SEE DWG. NO. ST-A4-0004 CLIP CLIP Wmox (kg)
FOR APPLICATION OF REINFORCING PAD AND j h ¡l 80LT SIZE "["SIZE "L" SIZE
TYPE MARK A < 500 500 < A< 1000
A 103A 100 21 3/4"x50L C10 A5 940 280
FOR THE SIZE OF SHAPE STEEL. B 1038 150 21 3/4"x50L C15 A6 1200 600
SYMBOL & CODING
P/S STD. NO. REINF PAD(IF REQ'D)

CLIP-TYPE PIPE MAT'L
INS. THK "T''
PLAN DWG. NO. _ ___J ~---DIM. "R"
PIPE SIZE "p" - - - - - - 1 ' - - - - - - - - (OUTSIDE RADIUS)
DIM "A" _ _ _ _ _ _ __¡ - ELEV "E"
' - - - - - - - - - - ORIENTATION
DEGREE) PLAN ISO
RESTING RV-32 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1329 (FOR BARE AND INSULA TED PIPE,
VESSEL CLIP) AO
L A.
(MAX. 1000)
NORTH
.
1
N
D
U_______ _
1
SOUTH
4-BOLT & NUT
PLAN
40
CLIP f103A/B
FURNISHED BY
VESSEL VENDOR
El.IV "I"
"["SIZE
le. 12 v.ELD
TO BRACKET " ["
SECTION BOLT HOLE "h0"

EYE BOLT
(EBTL)
1. MATERIAL
- LUG PLA TE : SAME AS RUN PIPE OR MA T'L TABLE. TURN BUCKLE STOPPER LUG
(TBL) (PS-11)
K API 5L GR.B, A106 GR.B A283 GR.C OR EQ. L.H. TH'D
y A335 P11 A387 GR.11 OR EQ.
w A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
UNIT (mm)
- BOLT/NUT : A307 Gr.B W/GALV. OR EQ.
- CLAMP, BOLT/NUT PIPE SIZE ROD SIZE e E
NPS "p" (in ch) TYPE A TYPE B
3• 1/2" 208 195 50
4• 5/8" 228 215 50
y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H
6" 3/4" 273 260 50
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
8" 1· 338 325 75
X A312 TP304, lP316 A240 TP304 OR EQ. A193-B7 /A194-2H
10" 1-1/4" 373 360 75
z A312 lP321 A240 lP321 OR EQ. A193-B7 /A194-2H
12" 1-1/4" 398 385 90
2. DIM. "L"=R-JR' -e' UNIT (mm)
CLIP CLIP Wmox (kg)
3. SEE DWG. NO. ST-M-1006/1010/1013/1017 h0 BOLT SIZE "["SIZE "L" SIZE
FOR THE DA TEil OF HANGER ASSEMBL Y TYPE MARK A 5 500 500 < A5 1000
AND DWG. NO. ST-M-1255/1017 A 103A 100 21 3/4"x50L C10 A5 940 280
FOR STOPPER LUG DETAil AND RISER CLAMP.
B 1038 150 21 3/4"x50L C15 A6 1200 600
SYMBOL & CODING
P/S sm. NO.

PIPE MAT'L
CLIP TYPE
"R" ~--DIM
SLJpp'T SERIAL NO. (OUTSIDE RADIUS)
PLAN DWG. NO. ---~ ~---- HIGHT "H"
~------ ELEV "E"
PIPE SIZE "p"
~-------- DIM "A" PLAN ISO
RESTING RV-33 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1330 (FOR BARE ANO INSULATED PIPE, AQ
VESSEL CLIP
L ! e 10
(MIN. 600, MAX. 1700)
MIN. 25 TYP.
SOUTH "' 9
PLAN
TRUNNIONS
G G
M
CILP 104A B C 50
FURNISHED BY
VESSEL VENDOR
.,..,
o
o
llDT ...- TRUNNION "Q"
REINF. PAO
o (SEE NOTE 3)
...-
TRUNNION
.,..,
o
(TR-2)
:o
ll 12 WELID TO
BRACKET T" PIPE SIZE TRUNNION
NPS "p" NPS "Q"
PIPE SIZE "p"
6" 4• "T"+100 ·r+200 ·r+215
8" 4• "T"+125 ·r+225 ·r+24o
10· 6" "T"+150 "T"+250 "T" +265
SECTION 12· 8" ·r· +180 "T"+280 "T" +295
14" a· ·r+19o ·r+29o ·r+305
16" 10· ·r+220 ·r +320 ·r+335
1. MATERIAL 18" 10· "T"+245 "T"+345 ·r+360
- TRUNNION "Q" : SAME AS RUN PIPE OR MAT'L TABLE. 12·
20· "T"+270 "T" +370 ·r+385
CODE RUN PIPE TRUNNION 3. SEE DWG. NO. ST-A4-0004 24" 12· "T"+320 "T"+420 "T" +435
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. FOR APPLICA TION OF REINFORCING 26" w ·r +35o "T"+450 "T"+465
y A335 P11 A335 P11 OR EQ. PAD ANO TRUNNION ALLOWABLE
28" 14" ·r +310 "T"+470 "T"+485
LOAD S.
w A335 P22 A335 P22 OR EQ. 30• 16" "T"+400 ·r+5oo "T"+515
X A312 TP304, TP316 A312 TP304 OR EQ. 4. SEE DWG. NO. ST-A4-0001 32" 16" "T"+420 "T"+520 "T" +535
z A312 TP321 A312 TP321 OR EQ. FOR THE SIZE OF SHAPE STEEL.
UNIT (mm)
- SHAPE STEEL : A36 OR EQ. Wmax (kg)
CLIP CLIP
- BOL T/NUT : A307 GR.B-GALV. OR EQ. e g h~ K BOLT SIZE "L"SIZE "L" SIZE
TYPE MARK A ~ 1200 1200 < A~ 1700
A 104A 150 30 60 45 18 42 5/8"x60L C15 A7 4500 4000
2. OIM "M" =(A+L)-85
OIM "L"=R-Jrf-C
2 B 1048 200 45 90 55 21 64 3/4"x60L C20 A7 6500 6500
c 104C 300 75 150 75 28 106 1"x65L C30 A7 10500 9000
SYMBOL & CODING
P/S sm. NO. REINF PAD(IF REQ'D)

(1
~VJ~0091
CLIP TYPE PIPE MAT'L
INS. THK "T"
SUPP'T SERIAL NO.
PLAN DWG. NO.
DIM "R"
(OUTSIDE RADIUS) IRVt091
PIPE SIZE "p" ELEV "E"
ORIENTATION
DIM "A"
(DEGREE) PLAN ISO
RESTING RV-34 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1331 (FOR BARE ANO IN SULA TED PIPE,
VESSEL CLIP AO
A. c 10
NORTH
1
!'' (MIN. 600, MAX. 1700)
MIN. 25 TYP.
'
N
1
'
[:}_~
'-'
.¡;
SOUTH
PLAN RISER CLAMP

(RC)
NOTE
1. MATERIAL
CILP 104A c M
FURNISHED BY - LUG PLA TE : SAME AS RUN PIPE OR MA T'L TABLE.
VESSEL VENDOR 50
o y A335 P11 A387 GR.11 OR EQ.
U')
w A335 P22 A387 GR.22 OR EQ.

lllV "E. ....
o
X A312 TP304, TP316 A240-304 OR EQ.
z A312 TP321 A240-321 OR EQ.
....
o - SHAPE STEEL : A36 OR EQ .
o
U')
- CLAMP, BOLT/NUT
::::;; CODE RUN PIPE CLAMP BOLT & NUT

lt 12 WELD TO
BRACKET 'C::" K APl-5L GR.B, A106 GR.E A283 GR. C OR EQ. A307 GR.B OR EQ.
y A335 P11 A387 GR.11 OR EQ. A193-B7 /A194-2H
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
X A312 TP304, TP316 A240 TP304 OR EQ A193-B7 /A194-2H
PIPE SIZE 2. DIM 'M"=(A+L)-85, DIM "L"=R-JR' -c'

NPS "p"
3. SEE DWG. NO. ST-M-1255/1017 FOR
6" 220 90 THE DETAil OF STOPPER LUG AND RISER CLAMP.
8" 285 90 4. SEE DWG. NO. ST-A4-0001 FOR THE
10· 330 100 SIZE OF SHAPE STEEL.
12· 355 100
14" 370 125
16" 410 125
18" 440 150 UNIT (mm)
20· 465 150 CLIP CLIP Wmax (kg)
TYPE MARK j e f g h~ K BOLT SIZE "e "SIZE "L" SIZE
24" 515 150 A ~ 1200 1200 < A ~ 1700
26" 540 150 A 104A 150 30 60 45 18 42 5/8"x60L C15 A7 4500 4000
28" 570 150 B 1048 200 45 90 55 21 64 3/4"x60L C20 A7 6500 5500
30" 600 150 e 104C 300 75 150 75 28 106 1"x65L C30 A7 10500 9000
SYMBOL & CODING
P/S sm. NO.

~-- INS. THK 'T"
SUPP'T SERIAL NO. ~--- DIM "R"
PLAN DWG. NO. --~ (OUTSIDE RADIUS)
' - - - - - - ELEV "E"
PIPE SIZE "p" ' - - - - - - - - ORIENTATlON
OIM "A" (DEGREE)
PLAN ISO
RESTING RV-35 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1332 (FOR BARE ANO INSULA TED PIPE,
VESSEL CLIP AO
L A c 10
MIN. 25 TYP.
1
'
1 ~
[:}_~
10
SOUTH
PLAN TRUNNION "Q"
CILP #104A/B/C
50 MIN. 25
FURNISHED BY
VESSEL VENDOR (TYP.)
o
"'
ILIV "E• ~..____ __
TRUNNION "Q'"
REINF. PAO
(SEE NOTE 2)
o TRUNNION
:::;; le. 12
"'
WELO TO (TR-2)
BRACKET"C" G
PIPE SIZE lRUNNION ROO SIZE
NPS "Q"
c TYPE-A TYPE-B
NPS "p" (in ch) TYPE-C
6" 4• 5/8" "l"+100 "l'+200 ·r +215
PIPE SIZE "p" 8" 4• 3/4" Tt125 "T" +225 "T" +240
SECTION
UNIT (mm) 10· 6" 3/4" "l'+150 "T"+250 "T' +265
12· 8" 1· 'T' + 180 "l'+280 'T' +295
CLIP CLIP j e f g h!b K BOLT SIZE "e: "SIZE "L" SIZE Wmax (kg)
TYPE MARK A ~ 1200 1200 < A < 1700 14" 8" 1· "T" + 190 "T" +290 "T' +305
A 104A 150 30 60 45 18 42 5/8"x60L C15 A7 4500 4000 16" 10· 1-1/4" "T" +220 "T" +320 "T' +335
B 1048 20( 45 90 55 21 64 3/4"x60L C20 A7 6500 5500 18" 10· 1-1/4" ·r +245 "T" +345 "T" +360
c 104C 300 75 150 75 28 106 1"x65L C30 A7 10500 9000 20· 12· 1-1/2" T+270 "T" +370 "T'+385
24"' 12" 1-1/2" Tt320 T+420 "T" +435
NOTE
2. SEE DWG. NO. ST-M-0004 FOR APPLICATION OF 26" 14" 1-1/2" T+350 T+450 T+465
1. DIM "M" =(A+L)-85-120-N
REINFORCING PAD ANO TRUNNION ALLOWABLE LOAOS. 28" 14" 1-1/2" "T"+370 T+470 T+485
DIM "L"=R-~
4. SEE DWG. NO. ST-M-0001 30" 16" 1-1/2" 'T"+400 Tt500 "T"+515
3. SEE DWG. NO. ST-M-1006/1010/1013/1014
FOR THE SIZE OF SHAPE STEEL. 32" 16" 1-1/2'' "l"+420 "l"+520 "T'+535
5. MATERIAL
- TRUNNION & REINF.PAO : SAME AS RUN PIPE OR MAT'L TABLE. - CLAMP, BOLT UT
CODE RUN PIPE lRUNNION & REINF. PAD CODE RUN PIPE CLAMP BOLT &: NUT
K API 51.. GR.B, A106 GR.8 API SL GR.B OR EQ. K APl-5L GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ.
y A335 P11 A335 P11 OR EQ. Y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
w A335 P22 A335 P22 OR EQ. W A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
X A312 TP304, TP316 A312 TP304 OR EQ.
z A312 TP321 A312 TP321 OR EQ.
Z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
SYMBOL & CODING
P/S STO. NO.

CLIP TYPE
SUPP'T SERIAL NO.
PLAN OWG. NO.
REINF. PAOA(IF REQ'O)
PIPE MAT'L
DIM "R"
(OUTSIOE RADIUS)
INS. THK "T" 1 RV!09i
(1
~,sjMI
PIPE SIZE "p" ELEV "F"
ELIEV "E"
OIM "A" ORIENTATION
(OEGREE) PLAN ISO

RESTING RV-36 REV.
(FOR BARE ANO INSULA TED PIPE,
VfSSEL CLIP AO
L ! e 10
(MIN. 800, MAX. 1700)
NORTH MIN. 25 TYP.)
1
'
N
j_ __ _l_~
ISER CLAMP
SOUTH (RC)
PLAN TRUNNIONS
M N 1201 PIPE SIZE 'p'

CLIP 104 A B C
CLEV1S BRACKET
FURNISHED BY
VESSEL VENDOR (CLS)
UNIT (mm)
o
"' PIPE SIZE e E
ROD SIZE
NPS 'p' T'Tl'E-A T'Tl'E-B/C b (inch)
ILBV T ~+-----
6" 260 253 90 50 3/4"
8" 325 318 90 75 1·
10· 360 353 100 90 1-1/4"
o 12' 385 378 100 90 1-1/4"
o
"' o
00 14' 400 393 125 90 1-1/2'
EYE BOLT
:::. le. 12 WELD TO EBTR 16" 440 433 125 90 1-1/2'
BRACKET 'e" TURN BUCKLE 18' 465 458 150 90 1-1/2'
(TBL) 20' 490 483 150 90 1-1/2'
EYE BOLT 24' 540 533 150 90 1-3/4"
(EBTL)
ILBV. T 26' 565 558 150 90 1-3/4"
NOTE 28" 595 588 150 90 1-3/4"
30" 620 613 150 90 1-3/4"
1. MATERIAL
- LUG PLA TE : SAME AS RUN PIPE OR MA T'L TABLE. UNIT (mm)
CODE RUN PIPE LUG PLATE CLIP CLIP Wmax (kg)
e f g h~ K BOLT SIZE "c"SIZE "L' SIZE
K API 5L GR.B, A106 GR.B A283 GR.C OR EQ. TYPE MARK A ~ 1200 1200 < A ~ 1700
y A335 P11 A387 GR.11 OR EQ. A 104A 150 30 60 45 18 42 5/8"x60L C15 A7 4500 4000
w A335 P22 A387 GR.22 OR EQ. B 1048 200 45 90 55 21 64 3/4"x60 C20 A7 6500 5500
X A312 TP304, TP316 A240-304 OR EQ. e 104C 300 75 150 75 28 106 1'x65L C30 A7 10500 9000
z A312 TP321 A240-321 OR EQ.
- SHAPE STEEL : A36 OR EQ. 2. DIM 'M"=(A+L)-85-120-N
- BOLT/NUT : A307 GR.8-GALV. OR EQ. DIM 'L'=R~
- CLAMP, BOLT/NUT
3. SEE DWG. NO. ST-M-1006/1010/1013/1017 FOR THE DETAil OF
HANGER ASSEMBL Y.
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H 4. SEE DWG. NO. ST-A4-1255 & 1017 FOR THE DETAil OF STOPPER
LUG ANO RISER CLAMP.
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
X A312 TP304, TP316 A240 TP304 OR EQ. A193-87 /A194-2H 5. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
SYMBOL & CODING
P/S SID. NO. LUG MAT'L

CLIP TYPE INS. THK 'T'
L - - - - DIM 'R'
SUpp'T SERIAL NO. (OUTSIDE RADIUS)
PLAN DWG. NO. L - - - - - ELEV. 'F'
PIPE SIZE 'p' ~------ ELEV. "E"
DIM 'A' RIENTATION PLAN ISO
DEGREE

RESTING RV-37 REV.
(FOR INSIJLAlED RISER MULTI-PIPE: VESSEL CLIP) AQ
L A
NORTH (MAX. 1000) EQUIVALENT
1 PIPE SIZE "Pe"
1
'
"':t=:== U...ef5"=.::¡==:;;¡
_ti_ __!
1
+
Ll
1
~ ~:t=:== r-o;;e:=~=,,.
TRUNNION
(TR-2)
SOUTH 4-BOLT & NUT UNIT (mm)
PIPE SIZE TRUNNION
PLAN NPS "p" NPS "Q" H G
CLIP 104A B 3" 2" T+80 "T"+165

FURNISHED BY 80 40 4" 2· "T" +90 "1+175
VESSEL VENOOR 5" 3• T+100 "1+185
6" 4• "T"+110 "1+195
....
Cl
8" 4• "T" +135 "1+220
10· 6" "T"+165 "T"+250
12· 8" "T" +190 "T''+275
o+---~g¡;;;;¡:======;;::=r==:::;;~;;;;:==;7¡
,.,.,+---
....
Cl
ll 12 WELO TO
BRACKET "["
SECTION
Pe= 14" TO 32"
NOTE
1. MATERIAL
2. DIM "M"=(A+L)-85-230
3. DIM. "L"=R-jR'-rf
CLIP CLIP
TYPE MARK
A 103A
B 1038 A6 390 490 480
SYMBOL & CODING

1 RV376-Q.ü1-Ll.001-18" -&O,Qll-810®-QJ~-U§~-fg_!jQQ- llQQ 1
P/s sm .
CLIP TYP E
NO. T ¡
SUPP'T SERIAL NO. - INS.THK "f{IF REQ'D)
PLAN DWG. NO. DIM "R"
EQV.PIPE SIZE "Pe" (OU TSIDE RADIUS)
ELEV. "E"
DIM "A"
ORIENTATION
DIM "B" (DEGREE)
RESTING RV-38 REV.
(FOR BARE PIPE, VESSEL CLIP) AO
L A
(MIN. 600, MAX. 1700)
SOUTH
PLAN G G
BOLT HOLE "h~"
6 TYP.
PLATE
50x50x6mm
REINF. PAD
(SEE NOTE 3)
....
C>
TRUNNION
(TR-2)
UNIT (mm)
::::;; ll 12 WELD TO
BRACKET "[" PIPE SIZE ºp" PIPE SIZE TRUNNION G
NPS •p• NPS "Q" c T'rPE-A1-f?P~~~
B
6" 4" 100 250 265 88

8" 4" 125 280 300 113
10· 6" 150 300 315 140
SECTION 12· 8" 180 330 345 165
14" 8" 190 340 355 181
NOTE
16" 10· 220 370 385 207
1. MATERIAL 18" 10· 245 400 410 232
- TRUNNION "Q" : SAME AS RUN PIPE OR MA T'L TABLE. 20· 12" 270 420 435 257
CODE RUN PIPE TRUNNION 24" 12" 320 470 485 308
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 3. SEE DWG. NO. ST-A4-0004 26" 14• 350 500 515 333
y A335 P11 A335 P11 OR EQ. FOR APPLICATION OF REINFORCING 28" 14" 370 520 535 359
PAD ANO TRUNNION ALLOWABLE
w A335 P22 A335 P22 OR EQ.
LOADS. 30" 16" 400 550 565 384
X A312 TP304, TP316 A312 TP304 OR EQ. 32" 16" 420 570 585 410
L A333 GR.6 A333 GR.6 OR EQ.
UNIT (mm)
CLIP CLIP Wmax k
TYPE MARK e g h~ k BOLT SIZE "["SIZE "[-1"SIZE
A5.1200 1200< A5.1700
- BOLTjNUT: A307 GR.B-GALV. OR EQ.
A 104A 150 30 60 45 18 42 5/8"x60L C15 C15 4500 4000
2. DIM "M" =(A+L)-85 B 1048 200 45 90 55 21 64 3/4"x60L C20 C15 6500 6500
DIM. "L"=R-~ c 104C 300 75 150 75 28 106 1"x65L C30 C15 10500 9000
SYMBOL & CODING
P/S SID. NO. _ _____, REINF PAD (IF REQ'D)

CLIP TYPE ----~
PIPE MAT'L
SUPP'T SERIAL NO. - - - -
~--
DIM "R"
PLAN DWG. NO.-----~ (OUTSIDE RADIUS)
EQV.PIPE SIZE "Pe"------~ ~---- ELEV. "E"
DIM "A" ----------~ ~------ ORIENTATION
(DEGREE) PLAN ISO
RESTING RV-39 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1334 (3/3) (FOR INSULATED PIPE, VESSEL CLIP) AO
L A
1
'
1
'
1
~---~ _....QBIJJ!L
SOUTH
TRUNNIONS
PLAN G G
ILIV. "I• PLATE

50x50x6mm
REINF. PAD
(SEE NOTE 3)
....o TRUNNION
(TR-2)
:::. ll 12 WELD TO
UNIT (mm)
BRACKET "["
PIPE SIZE lRUNNION G
e B
NPS "p" NPS "Q" Tll'E-A 1-YPf=~
6" 4• ·r+ 100 ·r +250 T" +265 ·r +98
8" 4• ·r+ 125 T" +275 T" +290 "T' +123
10· 6" ·r+ 150 1+300 T"+315 "T'+151
SECTION 12· 8" "T' + 180 T" +330 T' +345 "T'+175
14" 8" "T' + 190 T"+340 T' +355 "T'+191
NOTE 16" 10· "T' + 220 T' +370 í+385 "T"+217
1. MATERIAL 18" 10· ·r+ 245 "í+395 Í+410 "T"+242
20· 12· "T" + 270 •r H20 "í+435 "T"+267
24" 12· "T'+ 320 T' +470 "í+485 "T"+318
CODE RUN PIPE TRUNNION 26" 14" "T'+ 350 T' +500 í+515 "T"+343
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 3. SEE DWG. NO. ST-M-0004
28" 14" ·r+ 370 í+520 T' +535 "T'+369
FOR APPLICA TION OF REINFORCING
y A335 P11 A335 Pl 1 OR EQ. PAD AND TRUNNION ALLOWABLE 30" 16' ·r+ 400 í+550 í+565 "T"+394
w A335 P22 A335 P22 OR EQ. LOADS. 32" 16" "T"+ 420 T" +570 í+585 "T"+420
X A312 TP304, TP316 A312 TP304 OR EQ. 4. SEE DWG. NO. ST-M-0001
UNIT (mm)
- SHAPE STEEL : A36 OR EQ. Wmox (kq)
CLIP CLIP j e f g h\ll k BOLT SIZE "["SIZE " [-l"SIZE
- BOLT/NUT : A307 GR.8-GALV. OR EQ. TYPE MARK A~1200 1200<A~1700
2. DIM "M"=(A+L)-85 A 104A 150 30 60 45 18 42 5/8"x60L C15 C15 4500 4000

DIM. "L"=R-µ B 1048 200 45 90 55 21 64 3/4"x60L C20 C15 6500 6500
e 104C 300 75 150 75 28 106 1"x65L C30 C15 10500 9000
SYMBOL & CODING
P/S STO. NO. - - - - ' REINF PAD (IF REQ'D)

CLIP TYPE ----~ PIPE MAT'L
SUPP'T SERIAL NO. ---~ INS. THK "T"
~---DIM "R"
PLAN DWG. NO.-----~
(OUTSIDE RADIUS)
EQV.PIPE SIZE "Pe" ------~ ' - - - - - - - ELEV. "E"
DIM "A" ~------- ORIENTATION
(DEGREE) PLAN ISO
RESTING RV-41 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1335 (FOR COLO INSULA TED RISER PIPE,
AO
l/ESSEL CLIP)
(MAX. 600)
NORTH
1
__ [)_ ___ ~r.2f=_=Ri~±=:-:=~~1 ORIENT
1
'
1
'
1
SOUTH
PLAN
~'-tt.....-ir-4=0
CRADLE THK "H"
CRD
~
'' 1
'
''
ILIV. "I" o
"-.PIPE CLAMP
(PCC)
SECTION BOLT HOLE "h~' ........._,
CLIP 101 A ' '--- INS. TBI "T"
FURNISHED BY
VESSEL 'k:NDOR
PIPE SIZE 'p'
r= 75 & UNDER
UNIT (mm)
CLIP CLIP Wmox (kg)
o b hi6 BOLT SIZE "L" SIZE DIM "C"
TYPE MARK A ~ 400 400<A~600
A 101 A 30 20 18 5/8"x50L A5 35 75 50
B 101 B 40 35 21 3/4"x55L A7 48 270 180
NOTE
2 2
1. DIM "L"=R-)R -C
2. MATERIAL

5. SEE DWG. NO. ST-M-1016 FOR THE DETAil OF CLAMP.
SYMBOL & CODING
CLAMP MAT'L
P/S STD. NO. INS. THK "T"
CLIP TYPE (NOT CRADLE THK "H")
SUpp'T SERIAL NO. ~--- ELEV "E"
~----- ORIENTATION
PLAN DWG. NO. _ _ _~
(DEGREE)
PIPE SIZE "p" ----~ ~------ DIM "A"
PLAN ISO
RESTING RV-42 REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1336 {FOR COUD INSULATED RISER PIPE, AO
VESSEL CUP)
A B
{MAX. 1000)
MIN.25
1
TRUNNION "Q"
1
'
1 REINF. PAD
SOUTH {SEE NOTE 4)
TRUNNION
PLAN
(TR-2)
ADIABA TIC BLOCK
FOR TURNNION ADB
CUP #103 A/B
VESSEL VENDOR
UNIT {mm)
PIPE SIZE TRUNNION
NPS •p• NPS "Q" 8 e G N
....o
3" 2· ·r+10 ·r+85 ·r+235 100
ILIV. "I• .,.,
o
2· ·r+85 "T"+95 ·r+2so
4" 100
5" 3• ·r+100 "T"+110 ·r+260 130
.,.,
o
' 6" 4• ·r+110 "T"+125 "T"+275 130
o.... ' 1 '
8" 4• "í+135 "T"+150 "í+300 130
SECTION
4=1 10·
12"
6"
8"
"T"+165
"T"+190
"T"+225 "T"+410
·r+250 "T"+435
155
180
CLIP CUP Wmax (kg)

TYPE MARK j h~ BOLT SIZE "["SIZE "L" SIZE
A ~ 500 500 < A ~ 1000
A 103A 100 21 3/4"x55L C10 A5 940 280
B 103B 150 21 3/4"x60L C15 A6 1200 600
NOTE
1. DIM "L"=R-JCC' 3. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
2. MATERIAL 4. SEE DWG. NO. ST-M-1000 FOR DETAil OF

ADIABA TIC BLOCK.
- TRUNNION & REINF.PAD : SAME AS RUN PIPE OR MAT'L TABLE.
CODE RUN PIPE TRUNNION & REINF. PAD 5. SEE DWG. NO. ST-M-0004 FOR APPLICATION OF
REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
X A312 TP304, TP316 A312 TP304 OR EQ.
SYMBOL & COOING
P/S SID. NO. REINF PAD{IF REQ'D)

(NOT CRADLE THK"H")
PLAN DWG. NO. --~ ~--DIM "R"
PIPE SIZE "p" - - - - - E L E V "E"
DIM "A" -------ORIENTATION
(DEGREE) PLAN ISO
~--------------------------------------------------- - - - - - -
REV.
RESTING RV-43
(FOR COLO IN SULA TED RISER PIPE,
VESSEL CLIP AO
B 10
(MAX. 1000) MIN. 25
NORTH G G
1 · \
1 D
__[\_ __ _
SOUTH
PLAN TRUNNION REINF. PAD
(TR-2) (SEE NOTE 4)
BOL T HOLE "h0"

CLIP 103 A B
FURNISHED BY
VESSEL VENDOR
ILIV. "l!• g....___
oo
CLE\llS BRACKET <Xl
lt 12 WELD TO : (CLS)
BRACKET •e• EYE BOLT
: (EBTL)
TURN BUCKLE --lf.t"M:Jr--1',-~ILIV"'"'-'-'._"r"~--~
(TBL) '
SECTION
CRADLE
THK. H =50mm
TR NNI
UNIT (mm) UNIT (mm)

Wmax (kg) PIPE SIZE TRUNNION ROO SIZE
CUP CLIP j h~ BOLT SIZE "c"SIZE "L" SIZE NPS "p" NPS "Q" B e E G
{inch)
T'tPE MARK A ~ 1200 1200 < A ~ 1700
A 103A 100 21 3/4"x55L C10 AS 940 280 3• 2· "1+70 ·r +17o 50 "T"+415 3/8"
B 1038 150 21 3/4"x60L C15 A6 1200 600 4" 2· ·r+ss "T"+185 50 "T"+430 1/2"
6" 4• ·r+235
"T" +110 50 "1+505 5/8"
NOTE
8" 4• ·r+135 ·r+260 50 ·r+53o 3/4"
10· 6" "1+165 ·r+29o 50 "T"+560 3/4"
1. DIM "L"=R-~ 12· 8" "T"+190 'T" +315 75 "T" +585 1·
2. MATERIAL
- BOLT/NUT : A307 GR.B-GALV. OR EQ. 3. SEE DWG. NO. ST-M-1006/1010/1013/1016 FOR THE DETAil OF
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE. HANGER ASSEMBL Y.
CODE RUN PIPE TRUNNION & REINF. PAD 4. SEE DWG. NO. ST-A4-0004 FOR APPLICA TION OF
K API 5L GR.8, A106 GR.B API 5L GR.B OR EQ. REINFORCING PAD ANO TRUNNION ALILOWABLE LOADS.
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
X A312 TIP304, TIP316 A312 TIP304 OR EQ.
6. SEE DWG. NO. ST-A4-1019 FOR THE DETAIL OF CRADLE.
SYMBOL & CODING
P/S STO. NO. REINF PAD(IF REQ'D)

SUpp'T SERIAL NO. INS. THK "T"
(NOT CRADLE THK"H")
PLAN DWG. NO. ~--- DIM "R"
PIPE SIZE "p" - - - - - ' ~---- ELEV "F"
' - - - - - - - - - ELEV "E"
OIM "A"
P~t~~!HºN PLAN ISO
RESTING RV-44 REY.
PIPING SUPPORT STANDARD DWG. ST-A4-1338 (FOR COLO INSULA TIED RISER PIPE, AQ
VESSEL CLIP)
NORTH
1
' 10
__b_ __ _
1
1
SOUTH
PLAN 6
ADIABA TIC BLOCK
, FOR TRUNNION
1 (ADB)
M ' G G
PIPE SIZE "p"
VESSEL VENDOR TRUNNION "Q"
"L" SIZE
TRUNNION "Q"
REINF. PAD
(SEE NOTIE 4)
o '' TRUNNION
'° 1 (TR-2)
'
i
w
"" 11'. 12 WELD TO
BRACKET t: " ' 1 ' UNIT (mm)
PIPE SIZE TRUNNION
NPS "p" NPS ·o· B c G N
6" 4" "T"+110 "T" +125 "T"+2l5 130

1 8" 4• "T"+135 "T"+150 "T"+300 130
SECTION 10· 6" "T"+165 "T"+225 "T"+410 155
12· 8" "T"+190 T +25 "T"+435 180
14" 8" "T" +205 T+265 ·rH5o 180
CLIP CLIP
J e f g h¡l K BOLT SIZE " [ "SIZE "L" SIZE
Wmax (kg) 16" 10" "T" +230 ·r +29 ·r+480 210
TYPE MARK A 5- 1200 1200 < A 5- 1700 18" 10· "T" +255 T+315 ·r+500 210
A 104A 150 30 60 45 18 42 5/8"x65L C15 Al 4500 4000 20· 12" "T" +280 ·r
+34 T+525 235
B 104B 200 45 90 55 21 64 3/4"x65L C20 Al 6500 5500 24" 12· "T" +330 T+39 ·r
+515 235
c 104C 300 15 150 15 28 106 1"xlOL C30 Al 10500 9000 26" 14" T+355 "T"+415 ·r
+600 250
NOTIE 2. MA TIERIAL 28" 14" "T" +385 ·r
H4s ·r
+63o 250
1. DIM "M"=(A+L)-85 - SHAPE STIEEL : A36 OR EQ. 30" 16" "T" +410 ·r
+46 ·r
+645 250
DIM ''L"=R-)R'-r! - BOL T/NUT : A30l GR.B-GALV. OR EQ. 32" 16" "T"+435 ·r
+495 ·r
+680 250
- TRUNNION & REINF.PAD : SAME AS RUN PIPE OR MAT'L TABLE.
CODE RUN PIPE TRUNNION & REINF. PAD FOR DETAil OF ADIABATIC BLOCK.
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 4. SEE DWG. NO. ST-M-0004
X A312 TIP304, TIP316 A312 TIP304 OR EQ. ANO TRUNNION ALLOWABLE LOADS.
FOR THE SIZE OF SHAPE STIEEL.
SYMBOL & CODING
P/S STO. NO.

CLIP TYPE REINF PAD(IF REQ'D)
TRUNNION MA TL
PLAN DWG. NO.----' (NOT CRADLE THK"H")
PIPE SIZE •p• _ _ _ ___, RV44A-009
DIM "A" ~--DIM "R"
ORIENTATION -------~ {OUTSIDE RADIUS)
DEGREE ~----ELEV "E" PLAN ISO
RESTING RV-45 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1339 (FOR COLO llNSULA TED RISER PIPE,
VESSEL CUP) AO
L 8 10
(MAX. 1700) f.AIN. 25
NORTH
1
__ [:\_ __
' u
1
'
1
SOUTH
PLAN
CILP #104A/B/C N 120

FURNISHED BY
VESSEL VENDOR
G G
• 1•
1· ·1
~+----
.,..,
o
"" 11. 12 \\UD TO

BRACKET "e' TRUNNION "Q"
TRUNNION REINF. PAD
-:_ CRADLE (TR-2) (SEE NOTE.4)
THK.'H"=50mm
SECTION PIPE CLAMP
(PCC)
UNIT (mm) UNIT (mm)

CLIP CLIP Wmox k PIPE SIZE TRUNNION ROO SIZE
T'!l'E f.AARK J e g h' K BOLT SIZE "["SJZE "L" SIZE
A ~ 1200 1200 < A ~ 1700 NPS •p• NPS ·a· (lnch) B c G
A 104A 150 30 60 45 18 42 5/8"x65L C15 A7 4500 4000 6" 4• 5/8" "T"+110 ·r+235 ·r+so5 50
B 1048 200 45 90 55 21 64 3/4"x65L C20 A7 6500 5500 8" 4• 3/4" ·r +135 ·r +260 ·r +530 50
c 104C 300 75 150 75 28 106 1"x70L C30 A7 10500 9000 10· 6" 3/4" ·r+165 ·r+290 ·r+soo 50
NOTE 12· 8" 1" ·r+19o ·r+315 ·r +585 75
1. DIM "M°=(A+L)-85-120-N 3. SEE DWG. NO. ST-M-1006/1010/1013/1016 14" 8" r ·r+205 ·r+33o ·r+6oo 75
DIM "L"=R-jR -C
2 2
FOR THE DETAil AND ALLOWABLE LOAD OF 16" 10· 1-1/4" "T"+230 ·r+355 ·r+625 75
HANGER ASSEMBL Y. 18" 10· 1-1/4" ·r+1ss ·r+38o "T"+650 75
2. MATERIAL
- SHAPE STEEL : A36 OR EQ. 20· 12· 1-1/2" ·r+2so "T"+405 'T"+675 75
- BOLT/NUT : A307 GR.8-GALV. OR EQ. FOR APPLICATION OF REINFORCING PAD 24" 12· 1-1/2" "T"+330 "T"+455 ·r+725 75
- TRUNNION & REINF.PAD : SAME AS RUN PIPE OR AND TRUNNION ALLOWABLE LOADS.
MAfl TABLE. 26" 14" 1-1/2" ·r+355 "T"+480 ·r+150 90
-
5. SEE DWG. NO. ST-M-0001 28" 14" 1-1/2" "T"+385 ·r+5o5 "T"+775 90
CODE RUN PIPE TRUNNION & REINF. PAD FOR THE SIZE OF SHAPE STEEL. 30" 16" 1-1/2" 'T"+410 ·r+535 ·r +805 90
K API 5L GR.8, A106 GR.B API 5L GR.B OR EQ..
32" 16" 1-1/2" "T"+435 ·r +560 ·r +830 90
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 6. SEE DWG. NO. ST-M-1019
-
X A312 TIP304, TIP316 A312 TIP304 OR EQ. FOR THE DETAIL OF CRADLE.
SYMBOL & CODING
P/S SID. NO.

CLIP TYPE
SLJpp'T SERIAL NO.
PLAN DWG. NO.
REINF PAD(IF REQ'D)
PIPE MArL
INS. THK "T"
(NOT CRADLE THK"H")
L.___ _ _ DIM "R"
1
~
R¿A-009 ~
·( ,,f
PIPE SIZE "p" RV45A-009
(OLTSIDE RADIUS)
DIM "A"
' - - - - - - ELEV. "F"
QRIENTATI) ON PLAN ISO
(DEGREE ' - - - - - - - - - - ELEV "E"
RESTING RV-51 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1340 (FOR COLO INSULATED RISER PIPE,
VESSEL CLIP AO
A
(MAX. 600)
125 95
NORTH CRADLE
1 (CRD)
[j ____ _
'
1
'
1
PIPE SIZE "p"
SOUTH
PIPE CLAMP 1
PLAN (PCC) i
'
1
~
'
'
1
'
'
'
....o
5/8" NUTS
WELD TO 11'.
SECTION SECTION X-X
r=75 & UNDER

UNIT (mm)
PIPE SIZE CRADLE
r
NPS •p• THK "H"
1/2" 50 61
3/4" 50 64
1" 50 67
1-1/2" 50 75
1. MATERIAL
2. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL. CLIP CLIP Wmax (kg)
TYPE MARK "L" SIZE A <:; 400 400 <A'> 600
3. SEE DWG. NO. ST-M-1021 FOR THE DETAil OF
A 121A A5 60 40
URETHANE BLOCK ASSEMBL Y.
B 1218 A7 210 140
4. SEE DWG. NO. ST-M-1019 FOR THE DETAil OF CRADLE.
SYMBOL & CODING
CLAMP MAT'L
!NS. THK 'T
(NOT CRADLE THK"H")
.___ _ _ ELEV "E"
PLAN DWG. NO.--~
' - - - - - - - ORIENTATION
.___ _ _ _ _ _ DIM "A" PLAN ISO

RESTING RV-52 REV.
(FOR COLO INSULA TED RISER PIPE,
VESSEL CUP) AO
B
MAX. 1000
MIN.25
1
SOUTH
PLAN
. ¡J.10
• 200 ..
1
8-BOLT & NUT ADIABA TIC BLOCK SECTION "X" - "X"

FOR TURNNION ADB)
CLIP #122 A/B PIPE SIZE "p"
FURNISHED BY
VESSEL VENOOR G G
URETHANE BLOCK
(URBV)
llD "I!:.
'
w
: 1 :
1
REINF. PAD
(SEE NOTE 4)
SECTION r= 76 TO r=200 TRUNNION
(TR-2)
UNIT (mm)
CLIP CLIP Wmox (kg) PIPE SIZE TRUNNION
TYPE MARK hll o "[" SIZE "L" SIZE
A 5. 500 500 < A5. 1000 NPS "p" NPS "Q" B c G N
A 122A 18 180 C10 AS 750 220 3" 2· ·r+ 70 "T" +120 ·r+195 100
B 122B 18 230 C15 A6 960 480 4• 2· ·r+85 ·r+135 ·r+210 100
5• 3• "T" +100 "T" +150 "T" +225 130
NOTE
6" 4• ·r +110 "1+160 "1'+235 130
1. DIM ''L"= R-)R -C
2 2
8" 4• "T" +135 ·r+185 ·r+260 130
2. MATERIAL 10· 6" "T" +165 T +265 ·r +39o 155
- SHAPE STEEL : A36 OR EQ. 12· 8" "T"+190 T +290 Tt415 180
- TRUNNION & REINF.PAD : SAME AS RUN PIPE OR MA T'L TABLE.
CODE RUN PIPE TRUNNION & REINF. PAO 4. SEE DWG. NO. ST-A4-0004 FOR APPLICATION OF
API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
K
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 5. SEE DWG. NO. ST-A4-1021 FOR THE DETAil OF
A312 TP304, TP316 URETHANE BLOCK ASSEMBL Y.
X A312 TP 304 OR EQ.
ADIABA TIC BLOCK.
SYMBOL & CODING
P/S STO. NO. REINf PAD(IF REQ'D)

INS. THK "T"
SUPP'T SERIAL NO. (NOT CRADLE lHK"H")
PLAN OWG. NO. _ __ J '----OIM. "R"
PIPE SIZE "p" - - - - - ' ~---- ELEV "E"
DIM "A" '---------ORIENTATION

(DEGREE) PLAN ISO

RESTING RV-53 REV.
(FOR COLD INSULATED RISER PIPE,
VESSEL CLIP) AO
L ! B
MAX. 1000
MIN. 5 .. 190 •
45., ¡ ~~ 1 45
BOLT HOLE "he" 1 1 1 •
NORTH
1
o
Nu "'
__ L_l __ _ o
o
"'
SOUTH
TYP.
SECTION ·x· - ·x·
oo
M16 NUTS WELD TO 00
11'.
x
<(
~
SECllON REINF. PAD
(SEE NOTE 4)
TRUNNION
(TR-2)
PIPE SIZE TRUNNION ROO SIZE

NPS •o• NPS "Q" B c G E (inch)
UNIT (mm) 3• 2· ·r+7o ·r+23a "T"H15 50 3/8"
CLIP CLIP Wmax (kg) 4• 2" ·r+85 "T"+245 "T"H30 50 3/8"
TYPE MARK h0 a "[" SIZE "L" SIZE A ~500 500 < A ~ 1000 5• 3• ·1+100 ·r +280 'TH90 50 1/2"
A 122A 18 180 C10 AS 750 220 s· 4• "T"+110 ·r+295 "T"+505 50 5 8"
B 122B 18 230 C15 A6 960 480 8" 4• "T"+135 ·r+320 "T"+530 50 5 8"
NOTE 10· s· "T" +165 ·r +345 ·r+5ss 50 3 4•
12· 8" ·r+190 "T" +375 "T"+585 75 1·
1. DIM "L"= R- j rf- -c'
2. MATERIAL
- SHAPE STEEL : A36 OR EQ. 3. SEE DWG. NO. ST-M-1010/1013/1016/1019 ANO ST-A4-1021
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MA Tl TABLE. FOR THE DETAil ANO ALLOWABLE LOAD OF HANGER ASSEMBL Y.
CODE RUN PIPE TRUNNION & REINF. PAD
FOR APPLICA llON OF REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
K API SL GR.B, A106 GR.B API SL GR.B OR EQ.
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 5. SEE DWG. NO. ST-A4-0001 FOR THE SIZE OF SHAPE STEEL.
X A312 llP304, llP316 A312 TP 304 OR EQ. 6. SEE DWG. NO. ST-A4-1019 FOR THE DETAil OF CRADLE.
7. SEE DWG. NO. ST-A4-1021 FOR THE DETAil OF URETHANE BLOCK ASSEMBLY.
SYMBOL & CODING

PLAN DWG. NO. (NOT CRADLE THK "H")
PIPE SIZE "p" ' - - - - DIM "R"
(OUTSIDE RADIUS)
DIM "A" ~----ELEV. "F"
QRIENTAllON
(DEGREE) ~-----ELEV. "E" PLAN ISO
--------------------------------------------~·~---

RESTING RV-54 REV.
VESSEL CLIP) AO
.l B
(MIN. 1000, MAX. 1700)
MIN. 25
'S_ o 1
1
SOUTH
~o 1
1--ff~_j'lh"------'1
30
BOLT HOLE "hlil"
30
200 280
PLAN TIP. SECTION X-X SECTION Y-Y
G G
125 98
•I' ·
ADIABA TIC BLOCK
'""·1·1·
M
FOR TURNNION
c
(ADB)
VESSEL VENDOR
'O
lllV , .
REINF. PAD
(SEE NOTE 3)
PIPE SIZE TRUNNION

NPS "p" NPS "Q" B c G N
6" 4" "T" +110 "T" + 160 Tt235 130

SECTION 8" 4" "T" +135 "T"+185 Tt260 130
10" 6" "T" + 165 "T" +265 "T" +390 155
12" 8" "T"t190 "T" +290 "T" +415 180
14" 8" "T" +205 "T" +305 "T" +430 180
NUTS \llELD TO !'.
16" 10· "T" +230 "T" +330 "T" +455 210
UNIT (mm) 18" 10" "T" +255 "T" +355 Tt480 210
Wmax (kg) 20" 12" "T" +280 Tt380 Tt505 235
CLIP CLIP
a b d g hlil • [" SIZE "L" SIZE 12" "T" +330 Tt430 "T" +555 235
TYPE MARK A < 1200 1200 < A < 1700 24"
A 123A 230 220 190 106 18 C15 A7 3600 3200 26" 14" ·r+355 ·r +455 Tt580 250
B 123B 280 290 240 141 21 C20 A7 5200 4400 28" 14" "T" +385 Tt485 Tt610 250
c 123C 380 430 340 212 28 C30 A7 8400 7200 30" 16" "T" +410 ·r+510 "T" +635 250
32" 16" "T"t435 "T"t535 "T" +660 250
NOTE 2. MATERIAL
1. DIM °M"=(A+L)-125-98 FOR APPLICATION OF REINFORCING PAD
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE. ANO TRUNNION ALLOWABLE LOADS.
DIM "L"=R-)R'-c!
CODE RUN PIPE TRUNNION & REINF. PAD 4. SEE DWG. NO. ST-M-1021
API 5L GR.B OR EQ. FOR THE DET AIL OF URETHANE
K API 5L GR.8, A106 GR.B
BLOCK ASSEMBL Y.
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
A312 TP304, TP316 A312 TP304 OR EQ. 5. SEE DWG. NO. ST-A4-0001
X FOR THE SIZE OF SHAPE STEEL.
FOR THE DETAil OF ADIABA TIC BLOCK.
SYMBOL & CODING
P/S SID. NO.

CLIP TYPE
REINF PAD(IF REQ'D)
PIPE MAT'L # ~r
L,A-f~,:
(NOT CRADLE THK"H")
PLAN DWG. NO. DIM "R"
(OUTSIDE RADIUS) 1 RV45A-009
PIPE SIZE "p" ELEV "E"
DIM "A" ORIENTATION
(DEGREE) PLAN ISO

RESTING RV-55 REV.
VESSEL CLIP) AO
L A B
(MIN. 1000, MAX. 1700)
MIN. 25
6
o
'° 6
NORTH
'°
BOL T HOLE 'M"
PLAN
SECTION X-X SECTION Y-Y
URETHANE BLOCK
(URBV)
ILIV "E"
45· oo
CLEVIS BRACKET ~
REINF. PAD
(CLS) x
<( (SEE NOTE 3)
EYE BOLT 2- TRUNNION
(EBTL)
(TR-2)
ILIV "F"
PIPE SIZE lRUNNION ROO SIZE
SECTION
NPS "p" NPS "Q" (inch) B e G E
6" 4" 1/2" "T"+110 ·r +295 T+505 130

8" 4" 1/2" T+135 T+320 T+530 130
10· 6" T+165 T+345 T+555 155
UNIT (mm) 12· 8" T+190 T+375 ·r
+585 180
CLIP CLIP
a d g h~ "e" SIZE ''L" SIZE
Wmax (kg) 14" 8" ·r+205 ·r +39o "T''+600 180
TYPE MARK A s 1200 1200 <A s 1700 16" 10· ·r+23o ·rH15 ·r+625 210
A 123A 230 220 190 106 18 C15 A7 3600 3200 18" 10· "T" +255 ·r +440 ·r +65o 210
B 123B 280 290 240 141 21 C20 A7 5200 4400 20· 12" "T"+280 ·r +465 ·r +675 235
c 123C 380 430 340 212 28 C30 A7 8400 7200 24" 12· "T" +330 T+515 T+725 235
NOTE 26" 14" "T" +355 "T" +540 ·r + 150 250
1. DIM "M"=(A+L)-125-98
28" 14" "T" +385 ·r + 565 "T" + 775 250
DIM "L"=R-~ 30" 16" ·rH10 ·r· +590 "T" +800 250
2. MATERIAL
32" 16" H 2" ·r+435 "T"+615 "T"+825 250
- SHAPE STEEL : A36 OR EQ. 3. SEE DWG. NO. ST-A4-0004 FOR APPLICATION OF
REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
4. SEE DWG. NO. ST-M-1006/1010/1013/1016 ANO ST-A4-1021
CODE RUN PIPE TRUNNION & REINF. PAD FOR THE DETAil ANO ALLOWABLE LOAD OF HANGER ASSEMBL Y.
K API 5L GR.B, A106 GR.B API SL GR. B OR EQ.
5. SEE DWG. NO. ST-A4-0001 FOR TIHE SIZE OF SHAPE STEEL.
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
6. SEE DWG. NO. ST-A4-1021 FOR THE DETAil OF URNTIHANE BLOCK ASSEMBLY.
X A312 TP304, TP316 A312 TP304 OR EQ.
SYMBOL & CODING
P/S SID. NO. REINF PAD(IF REQ'D)

INS THK "T"
SUPP'T SERIAL NO. (NOT.CRADLE TIHK"H")
PLAN DWG. NO. ' - - - - - DIM "R"
PIPE SIZE "p" (OUTSIOC RADIUS)
DIM "A" _ _ _ ___, c...__ _ _ _ ELEV. "F"
QRIENTATION ~----- ELEV. "E"

(DEGREE) PLAN ISO
REY.
RESTING TR-1
(FOR RISER PIPE, TRUNNION TYPE) AO
PIPE SIZE "p"

PIPE SIZE "p"
MIN 25mm
U-BOLT
(UBT)
GS-8
REINF.PAD IF REQ'D
TYPl-G
(GUIDE)
PIPE SIZE "p"

MIN 25mm ORIENTATION
U-BOLT TRUNNION N(O")

(UBT)
'\~-c(90)
U-BOLT AS-8
(UBT)
AS-8
S(180")
TRUNNION " "
EXISTING STEEL ORIENTA TION SHOULD BE
REINF.PAD IF REQ'D MEASURED CLOCK'MSE
FROM PLANT NORTH(O")
"a" EQUALS THE

TRUNNION WALL a
PIPE SIZE TRUNNIONS

NPS "p" NPS "Q" w
1-1/2" 1"
50W X 9T T
FOR 6" & LARGER 2" 1-1/2"
WELD DETAil TRUNNION ONLY 3" 2" 50
4• 2"
WELD DETAil (BY REINF. PAD)
6" 4"
1. MATERIAL 8" 4"
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAÍL TABLE. 10" 6"
- STIFFNER PLA TE : A36 OR EQ. 2. PAD THICKNESS "T" : SAME AS RUN PIPE 8" 90
12"
CODE RUN PIPE TRUNNION & REINF.PAD 3. THE SHIM PLA TE SHOULD BE WELDED 14" 8"
K API 5L GR.8, A106 GR.8 API 5L GR.8 OR EQ. ON EXIST BEAM AFTER INSTALLA TION. 16" 10"
y A335 P11 A335 P11 OR EQ. 18" 10"
4. SEE DWG NO. ST-A4-0004
w A335 P22 A335 P22 OR EQ. FOR APPLICATION OF REINFORCING PAD ANO 20· 12· 100
X A312 TP304, TP316 A312 TP304 OR EQ. TRUNNION ALLOWABLE LOADS. 24" 12"
z A312 TP321 A312 TP321 OR EQ. 26" 14"
L A333 GR.6 A333 GR.6 OR EQ. 5. SEED DWG. NO. ST-A4-1001
28" 14"
N A333 GR.3 A333 GR.3 OR EQ. FOR THE DETAIL OF U-BOL T. 120
30" 16"
32" 16"
SYMBOL & CODING
( I )
) 1
SUB-TYPE
SUPP'T SERIAL NO. DIM "A" 1 Tfu-oog 1
PLAN DWG. NO. ~----ELEV. "E"
PIPE SIZE "p" ~------QRIENTATION

(DEGREE) PLAN ISO
~---------------------------------------------------------
REV.
RESTING HTR-1
FOR RISER PIPE, TRUNNION T'rPE)
MIN 25mm PIPE SIZE "p"
ILIV. "I•
~-----
ORIENTATION
EXISTING STEEL
TRUNNION " " TRUNNION N(O')
W:~-t(90":
S(180')
ORIENTATION SHOULD BE
MEASURED CLOCK'MSE
FROM PLANT NORTH(O')
"a" EQUALS THE ~~bl

TRUNNION WALL a 45'
"a" EQUALS THE
TRUNNION WALL a
9
PIPE SIZE TRUNNIONS

NPS "p" NPS "Q"
- - SllFFENER
H/2" 1·
50W X 9T T
FOR 6" & LARGER 2" 1-1/2"
WELD DETAil TRUNNION ONL Y 3" 2"
4" 2"
WELD DETAil (BY REINF. PAD)
6" 4•
8" 4•
10" 6"
NOTE 12· 8"
1. MATERIAL 14" 8"
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE. 16" 10"
- SllFFNER PLA TE : A36 OR EQ. 18" 10"
CODE RUN PIPE SUPPORT PIPE 20" 12"
y A335 P11 24" 12"
A335 P11 OR EQ.
w A335 P22 A335 P22 OR EQ.
X A312 TP304, TP316 A312 TP304 OR EQ.
z A312 TP321 A312 TP 321 OR EQ.
SYMBOL & CODING
SUpp'T SERIAL NO.
PLAN DWG. NO.
PIPE SIZE •p•

DIM "A"
ELEV. T
3RIENTA llON
) 11
1H~-0091
)
IHL091
1
DEGREE) PLAN ISO
REV.
RESTING TR-2
(FOR RISER PIPE, TRUNNION TYPE) AO
A A A
MIN 25mm REINF.PAD IF REQ'D
U-BOLT
MIN 25mm (UBT)
U-BOLT GS-8
(UBT)
GS-8
11.BV. "l. -~..._y_
-----
EXIST\NG STEEL
PIPE SIZE "p"
TYPl-R TYPl-G
(RESTING) (GUIDE)
A A
MIN 25mm
ORIENTA T\ON
U-BOLT
(UBT) TRUNNION N(O')
W(~¡90·1
AS-8
EXIST\NG STEEL S(180')

REINF.PAD(IF REQ'D) PIPE SIZE "p"
TYPl-A
(ANCHOR) ORIENTAT\ON SHOULD BE
MEASURED CLOCK'MSE
•a" EQUALS THE ~~~· FROM PLANT NORTH(O')
TRUNNION WALL a
"a· EQUALS THE
TRUNNION WALL a
PIPE SIZE TRUNNIONS
NPS "p" NPS "Q" w
1-1/2" 1·
- - STIFFENER -----y 2" 1-1 /2"
50W X 9T 3• 2" 50
FOR 6" & LARGER
TRUNNION ONL Y 4" 2"
6" 4•
WElD DETAil WElD DETAil (BY REINF. PAD) 8" 4•
10· 6"
1. MA TERIALS
12· 8" 90
- ST\FFNER PLATE : A36 OR EQ. 2. PAD THICKNESS "T": SAME AS RUN PIPE
14" 8"
16" 10"
CODE RUN PIPE TRUNNION & REINF.PAD 3. THE SHIM PLA TE SHOULD BE WELDED
ON EXIST BEAM AFTER INSTALLA T\ON 18" 10·
K API 5L GR.8, A106 GR.8 API 5L GR.B OR EQ.
4. SEE DWG NO. ST-A4-0004 20" 12· 100
y A335 P11 A335 P11 OR EQ.
FOR APPLICATION OF REINFORCING PAD 24" 12"
w A335 P22 A335 P22 OR EQ.
AND TRUNNION ALLOWABLE LOADS.
X A312 T\P304, TIP316 A312 T\P304 OR EQ.
26" 14"
5. SEE DWG. NO. ST-A4-1001 28" 14"
z A312 T\P321 A312 T\P321 OR EQ.
FOR THE DETAil OF U-BOLT. 120
A333 GR.6 OR EQ. 30" 16"
L A333 GR.6
A333 GR.3 A333 GR.3 OR EQ. 32" 16"
N
o ASTM B444 GR.1 ASTM 8444 GR.1 OR EQ.
SYMBOL & CODING
) / )
P/S STD. NO.
SU8-TYPE
SLJpp'T SERIAL NO.
PLAN DWG. NO. - - - - ~----ELEV.
DIM "A"
"E"
1 l-oog I
'--------ORIENTAT\ON
PIPE SIZE " p " - - - - - - - - ' (DEGREE) PLAN ISO
---------
REV.
RESTING HTR-2
FOR RISER PIPE, TRUNNION TYPE)
A A
MIN 25mm
'
1
'
1
'
ILIV. "I•
----0'
u !
1
TRUNNION "Q"
PIPE SIZE "p" ORIENTATION
TRUNNION N(Oº)
'\~(90)
S(180")
ORIENTA TION SHOULD BE

MEASURED CLOCKWISE
FROM PLANT NORTH(O")
"a" EQUALS THE
"a" EQUALS THE TRUNNION WALL a
TRUNNION WALL a
- - STIFFENER
50W X 9T
PIPE SIZE TRUNNIONS
FOR 6" & LARGER NPS "p" NPS "Q"
TRUNNION ONL Y
1-1/2" 1"
WElD DETAil WElD DETAil (BY REINF. PAD) 2" 1-1 /2"
3" 2·
4• 2·
NOTE 6" 4•
1. MATERIALS 8" 4"
- TRUNNION & REINF. PAD : SAME AS RUN PIPE OR MAT'L TABLE. 10· 6"
- STIFFNER PLA TE : A36 OR EQ.
12· 8"
CODE RUN PIPE SUPPORT PIPE 14" 8"
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 16" 10·
y A335 Pll A335 Pl 1 OR EQ. 18" 10·
w A335 P22 A335 P22 OR EQ.
20" 12·
X A312 TP304, TP316 A312 TP 304 OR EQ.
24" 12·
z A312 TP321 A312 TP321 OR EQ.
SYMBOL & CODING
~
J 11 )
SUPP'T SERIAL NO.
PLAN DWG. NO.

DIM "A"
ELEV. "E"
1 H~-009 I
ORIENTATION
PIPE SIZE "p" (DEGREE) PLAN ISO
REV.
SPRING SC-21
(HANGER TYPE UNDER CONCRETE) AO
ILIV "I"

CLEVIS BRACKET
(CLS)
NUT o
~ o
00
:e -
x
<
ó
EYE BOLT EYE BOLT

~ ~
PIPE CLAMP PIPE CLAMP
~'
(PCC)
ILIV "r"
PIPE SIZE "p" PIPE SIZE "p" PIPE SIZE "p"

CRADLE
(CRD)
(BARE PIPE) (HOT INSULA TED PIPE) (COLD INSULATED PIPE)
UNIT (mm)
PIPE SIZE ROD SIZE y ALLOW.
NPS "D" (inch) F L a LOAD (Kg)
1-1/2" 3/8" 135 50 6 275
2" 3/8" 145 55 6 275
3" 1/2" 165 75 6 515
4" 5/8" <D 195 95 6 820
6" 3/4" o 260 140 6 1230
1
....
8" 1" < 300 165 6 2250
1
10· 1-1 /4" >---
(/)
345 205 6 3630
12· 1-1 /4" w
w 370 230 6 3630
(/)
14" 1-1 /4" 420 260 6 3630
16" 1-1 /2" 445 285 9 5280
1. SEE DWG. NO. ST-M-1006/1013/1010/1014/1015/1016
FOR THE DETAil OF HANGER ASSEMBL Y. 18" 1-1 /2" 470 310 9 5280
?íl" 1-3/4" 520 350 9 7120
2. SEE DWG. NO. ST-A4-1019 FOR THE DETAil OF CRADLE. ?4" 1-3/4" 580 400 9 7120
3. ALL An ACHMENTS SHALL BE SUPPLIED BY SPRING MANUFACTURER.
SYMBOL & CODING
( 1 )
P/S STO. NO. CLAMP MAT'L ) 1
SUB-TYPE CRADDLE
(THK"H")
PLAN DWG. NO. - - - - ' ~--ELEV. "F"
1 s¿c-009 I
~----ELEV. "E"
PIPE SIZE "p"
~------DIM "B" PLAN ISO
REV.
SPRING SF-61
(T- TYPE ON F/O) AO
INS. TH1 "T"
~--r_
TRUNNION SIZE "Q"
(TR-1) .·.·.····]4-
.. /
·::;"' :r:
- -El.IV.
--- "I"-
El.IV. .,. El.IV. .,. El.IV.•,.
NOTE
1. MATERIAL
- PARTS DIRECTL Y WELDED TO PIPE :
SAME AS RUN PIPE OR MA fL TABLE.
PARTS DIRECTL Y
CODE RUN PIPE WELDED TO PIPE
y A335 P11 A387 GR.11 OR EQ.
W A387 GR.22 OR EQ.
A240-304 OR EQ.
A240-321 OR EQ.
FOR NPS 26" & LARGER

El.IV. .,. 3. SEE DWG. NO. ST-M-1104
El.IV. "F" FOR THE DETAil OF CRADLE(RESTING TYPE)
FOR THE DETAil OF SHOES.
EXISTING INSERT PLATE
UNIT (mm) PIPE SIZE TRUNNIONS

NPS "p" NPS "Q"
PIPE SIZE INS.THK "í H PIPE SIZE INS.THK "T" H PIPE SIZE INS.THK "í H
NPS "p" NPS "p" NPS "p" 1-1/2" 1"
UP TO 75 130 UP TO 75 210 UP TO 75 303 2" 1-1/2"
2· 76 TO 125 180 8" 76 TO 125 260 16" 76 TO 125 353
125 TO 175 230 125 TO 175 310 125 TO 175 403 3" 2"
175 TO 225 280 175 TO 225 360 175 TO 225 453 4• 2"
UP TO 75 145 UP TO 75 237 UP TO 75 329 6" 4"
76 TO 125 195 76 TO 125 287 76 TO 125 379
8" 4"
3" 125 TO 175 245 10" 125 TO 175 337 18" 125 TO 175 429
175 TO 225 295 175 TO 225 387 175 TO 225 479 10" 6"
UP TO 75 157 UP TO 75 262 UP TO 75 354 12· 8"
76 TO 125 207 76 TO 125 312 76 TO 125 404
4" 125 TO 175 257 12· 125 TO 175 362 20· 125 TO 175 454 14" 8"
175 TO 225 307 175 TO 225 412 175 TO 225 504 16" 10·
UP TO 75 184 UP TO 75 278 UP TO 75 405 18" 10"
76 TO 125 234 76 TO 125 328 76 TO 125 455
284 125 TO 175 24" 125 TO 175 505 20· 12·
6" 125 TO 175 14" 378
175 TO 225 334 175 TO 225 428 175 TO 225 555 24" 12·
SYMBOL & CODING
( 1 )
) 1
PIPE MAT'L
SUB-TYPE INS. THK "í
SLJpp'T SERIAL NO. (IF REQ'D)
1 S¿E-009 1
PLAN DWG. NO. ~---
ELEV. "F"
~-----ELEV. "E" SF61E-009
PIPE SIZE "p" ----~ ~-------DIM "A"
PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1357 SPRING SF -62
(T-TYPE ON F/D) AO
PIPE SIZE "p"
TRUNNION SIZE "Q"

(TR-1)
ILIV. 'T ILIV. 'T
NOTE
1. MATERIAL
- PARTS DIRECTLY WELDED TO PIPE :
SMAE AS RUN PIPE OR MArL TABLE.
PARTS DIRECTL Y
CODE RUN PIPE
WELDED TO PIPE
K API 5L GR.8, A106 GR.8 A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ.
W A335 P22 A387 GR.22 OR EQ.
X A312 TP304, TP316 A240-304 OR EQ.
Z A312 TP321 A240-321 OR EQ.
SHOE - OTHERS : A36 OR EQ.

5<1 VENT HOLE
~'---FO-R-NP_S_2,;_6_"-&- 2. SEE DWG. NO. ST-M-1346
ILIV. 'T COLUMN
LARGER FOR THE DETAil OF TRUNNION.
ILIV. 'T 3. SEE DWG. NO. ST-M-1104
FOR THE DETAil OF CRADLE(RESTING TYPE)
PIPE SIZE TRUNNIONS

UNIT (mm) NPS "p" NPS "Q"
PIPE SIZE INS.THK "T" H PIPE SIZE INS.THK "T" H PIPE SIZE INS.THK "T" H 1-1/2" 1"
NPS "p" NPS "p" NPS "p"
UP TO 75 130 UP TO 75 2" 1-1/2"
210 UP TO 75 303
2· 76 TO 125 180 8" 76 TO 125 260 16" 76 TO 125 353 3• 2·
125 TO 175 230 125 TO 175 310 125 TO 175 403 4" 2·
175 TO 225 280 175 TO 225 360 175 TO 225 453
6" 4•
UP TO 75 145 UP TO 75 237 UP TO 75 329
76 TO 125 195 76 TO 125 287 76 TO 125 379 8" 4•
3• 125 TO 175 245 10· 125 TO 175 337 18" 125 TO 175 429 10" 6"
175 TO 225 295 175 TO 225 387 175 TO 225 479
12· 8"
UP TO 75 157 UP TO 75 262 UP TO 75 354
76 TO 125 207 76 TO 125 312 76 TO 125 404 14" 8"
4• 125 TO 175 257 12· 125 TO 175 362 20" 125 TO 175 454 16" 10·
175 TO 225 307 175 TO 225 412 175 TO 225 504
18" 10·
UP TO 75 184 UP TO 75 278 UP TO 75 405
76 TO 125 234 76 TO 125 328 76 TO 125 455 20" 12·
6" 125 TO 175 284 14" 125 TO 175 378 24" 125 TO 175 505 24" 12"
175 TO 225 334 175 TO 225 428 175 TO 225 555
SYMBOL & CODING
( i (
P/S STD. NO. ) I )
PIPE MAT'L
SUB-TYPE
INS. THK ''T"
PLAN DWG. NO. --~ 1skE-0091
ELEV. "F"
PIPE SIZE "p" - - - - - - - ' ELEV. "E" SF62E-009
DIM "A" -------~ PLAN ISO
PIPING SUPPORT STANDARD DWG. ST-A4-1358 SPRING WEDGE SF- 71 REV.
(FOR VIBRA TION UNES) AO
A B 50 PIPE OR VOLUt.AE BOTILE

t.AIN.
>--
<
W:z
Uo
ZF
ADJUSTABLE <....:
""_J
SPRING WEDGE
""'
W< ->---'
~
_J
ÜV)
"'~
13mm SQUARE BARS TOP OF

25 D2 EXISTING INSERT PLATE SUPPORT
TYP. (TYP.) o
UNIT (mm)
SPRING
COt.APRESS
PIPE
SIZE
A B e D E F FOR
INSTALLATION
(NOTE 2)
2" 120 180 73 170 160 43
3" 120 180 87 170 160 43 13
4" 120 180 100 170 160 43
6" 140 210 130 200 160 46
13
8" 140 210 156 200 160 46
10" 200 270 197 300 160 60
12" 200 270 222 300 160 60
14" 200 270 238 300 160 60
16" 18
220 290 264 330 235 60
18" 220 290 289 330 235 60
20" 220 290 314 330 235 60
24" 240 370 368 380 235 64
26" 240 370 394 380 235 64
28" 240 370 419 380 235 64
30" 240 370 445 380 235 64
32" 25
240 370 470 380 235 64
34" 265 395 495 450 235 64
36" 265 395 521 450 235 64
NOTE
38" 265 395 546 450 235 64
1. VERTICAL MOVEMENTS OF PIPING DUE TO THERMAL EXPANSION 40" 265 395 572 450 235 64
SHALL NOT EXCEED 3mm.
42" 265 395 597 450 235 64
2. SPRING SHALL BE INSTALLED AS 44" 265 395 622 450 235 64
INITIALL Y COMPRESSEO.
46" 265 395 648 450 235 64
3. SEE DWG. NO. ST-A4-1028 FOR THE DETAil OF ADJUSTABLE 48" 290 420 673 500 235 64 30
SPRING WEDGE. 50" 290 420 699 500 235 64
52" 290 420 724 500 235 64
54• 290 420 749 500 235 64
60" 290 420 826 500 235 64
SYMBOL & CODING
SUPP'T SERIAL NO. ~-- PLAN DWG. NO.
PLAN ISO
REV.
SPRING SS-21
(HANGER TYPE UNDER STRUCTURE) AO
EXISTING BEAM
ILIV "I"
EXISTING BEAM
CLEVIS BRACKET
(CLS)
EYE BOLT
EYE BOLT EYE BOLT
EBT
~ EBT
PIPE CLAMP PIP CLAMP PIPE CLAMP
(PC) (PCH) (PCC)
PIPE SIZE "p" PIPE SI ZE "p" PIPE SIZE "p"

CRADLE THK"H"
(CRD)
TYP-A TYP-B TYP-C

(BARE PIPE) (HOT INSULATED PIPE) (COLO IN SULA TED PIPE)
UNIT (mm)
PIPE SIZE ROO SIZE y ALLOW.
NPS "p" F L E a
(inch) LOAD (Kg)
1. ALL ATIACHMENTS SHALL BE SUPPLIED 1-1/2" 3/8" 135 50 50 6 275
BY SPRING MANUFACTURER. 2· 3/8" 145 55 50 6 275
3• 1/2" 165 75 50 6 515
2. SEE DWG. NO. ST-M-1006/1010/1013/1015/1016
FOR THE DETAil AND ALLOWABLE LOAD OF HANGER ASSEMBL Y. 4" 5/8" 195 95 50 6 820
<D
6" 3/4" 5 260 140 50 6 1230
3. SEE DWG. NO. ST-M-1019 FOR CRADLE (CRD)
8" 1· í.... 300 165 75 6 2250
<(
10· 1-1/4" 1-
1 345 205 75 6 3630
C/J
12" 1-1/4" w 370 230 75 6 3630
w
14" 1-1/4" C/J 420 260 90 6 3630
16" 1-1/2" 445 285 90 9 5280
18" 1-1/2" 470 310 90 9 5280
20" 1-3/4" 520 350 90 9 7120
24" 1-3/4" 580 400 90 9 7120
SYMBOL & CODING
) / )
SUB-TYPE
SUPP'T SERIAL NO. 1 S¿C-009 1
PLAN DWG. NO. - - - - ' ~----ELEV. "E"

PIPE SIZE "p" _ _ _ __ _ J L - - - - - - - D I M "B"
PLAN ISO
----------
REV.
SPRING SS-22
(HANGER TYPE ON STRUCTURE) AO
.l
(MAX. 2000)
EYE BOLT
(EBT) EYE BOLT
~
PIPE CLAMP PIPE CLAMP
(PC) (PCC)

PIPE SIZE "p"
CRADLE
(CRD)
TYPB-.l TYPE-B TYPB-C
(BARE PIPE) (HOT INSULA TED PIPE) (COLO IN SULA TEO PIPE)
UNIT (mm)
PIPE SIZE ROO SIZE y MEMBER ALLOW.
NPS "p" (inch) F L SIZE "M" LOAD (Kg)
1-112· 3/8" 135 50 A6 275
1. ALL ATIACHMENTS SHALL BE SUPPLIED 2· 3/8" 145 55 A6 275
BY SPRING MANUFACTURER EXCEPT MEMBER "M". 3• 165 75 A7 515
1/2"
2. SEE OWG. NO. ST-M-1010/1014/1015/1016 4• 5/8" .,, 195 95 A10 820
FOR THE OETAIL OF HANGER ASSEMBL Y. 6" 3/4" o 260 140 A10 1230
1
....
8" 1· 300 165 C10 2250
3. SEE OWG. NO. ST-A4-1019 FOR CRAOLE. <(
1
10· 1-1 /4" 1-
(/) 345 205 C12 3630
12· 1-1 /4" L>.J
L>.J 370 230 C12 3630
(/)
14" 1-1 ;4• 420 260 C12 3630

1f;" 1-112· 445 285 C15 5280
1!<" 1-112· 470 310 C15 5280
1n• 1-314" 520 350 C20 7120
~ ·
... 1-314" 580 400 C20 7120
P/S SID. NO.

SUB- TYPE
SYMBOL & CODING
SS22C-009-1300HO"-A1500-8100-E15000-F12500-T50-K
CLAMP MA T'L
CRADDLE
)
~
/ ()
g
SUPP'T SERIAL NO. (1HK"H") ~
PLAN DWG. NO. --~ (IF REQ'D) SS22C-009
' - - - - - - ELEV. "F" SS22C-009
PIPE SIZE "p" ----~
' - - - - - - - - ELEV. "E" 1
~---~~~----º_M_"_A"_-_-_-_-_-_-_-_~---_-_-_~___~::::::_-:::.:::.:::_-:::::::::.::::::_-_D_IM_"_B_"_ _ _
1
- - 1 ._ _ _ P_LA_N_ _- - 1 ._ _ _1_so
___ ~~--~·J
SPRING SS-61 REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1363 (T- TYPE ON STRUCTURE) AO
TRUNNION SIZE "Q"
PIPE SIZE TRUNNIONS

NPS "p" NPS "Q"
PIPE SIZE "p"
1-1/2" 1·
--=iF-B---'4~a-±~l!D~" 2'' 1-1/2"
__l!D~ PIPE SIZE "p" 3" 2·
TRUNNION SIZE "Q" INS. THI "T" 4• 2"
(TR-1) CRADLE 6" 4•
8" 4•
t FOR NPS 10" & SMALLER t 10·
h-v-ILIV T ~~~~)"6"Vi~~~ll.IV~TI._ J'6V'1L1VT 12"
6"
8"
14" 8"
EXISTING BEAM EXISTING BEAM EXISTING BEAM 16" 10·
TYPl-B TYPl-C 18" 10·
20· 12·
PIPE SIZE "p" 24" 12·
IN CASE OF EXISTING BEAM ARE

.. y INS. TBI "T" "[" STEEL INSTALL RIB PLATE AS BELOW
:;
+~--D!"I"
<· o·
. , :r:
E~~3
6
12
SHOE
FOR NPS 26" & LARGER
10
lllV .,. lllV .,..
TYPl-1
UNIT (mm)
PIPE SIZE INS.THK "T" H PIPE SIZE INS.THK "T" H PIPE SIZE INS.THK "T" H NOTE
NPS "p" NPS "p" NPS "p"
UP TO 75 130 UP TO 75 237 UP TO 75 354 1. MATERIAL
76 TO 125 180 76 TO 125 287 76 TO 125 404 - PARTS DIRECTL Y WELDED TO PIPE :
2· 125 TO 175 230 10" 125 TO 175 337 20· 125 TO 175 454 SAME AS RUN PIPE OR MArL TABLE.
175 TO 225 280 175 TO 225 387 175 TO 225 504
UP TO 75 145 UP TO 75 262 UP TO 75 405 PARTS DIRECTL Y
COD RUN PIPE
76 TO 125 195 76 TO 125 312 76 TO 125 455 WELDED TO PIPE
3• 12· 24" K API 5L GR.B, A106 GR.B A283 GR.e OR EQ.
125 TO 175 245 125 TO 175 362 125 TO 175 505
175 TO 225 295 175 TO 225 412 175 TO 225 555 y A335 P11 A387 GR.11 OR EQ.
UP TO 75 157 UP TO 75 278 UP TO 75 456 w A335 P22 A387 GR.22 OR EQ
4• 76 TO 125 207 76 TO 125 328 76 TO 125 506
14" 28" X A312 TP304, TP316 A240-304 OR EQ.
125 TO 175 257 125 TO 175 378 125 TO 175 556
175 TO 225 307 175 TO 225 428 175 TO 225 606 z A312 TP321 A240-321 OR EQ.
UP TO 75 184 UP TO 75 303 UP TO 75 507 A333 GR.6 A516 GR.60 OR EQ.
76 TO 125 234 76 TO 125 353 76 TO 125 557
6" 16" 32"
125 TO 175 284 125 TO 175 403 125 TO 175 607 2. SEE DWG. NO. ST-A4-1346
175 TO 225 334 175 TO 225 453 175 TO 225 657 FOR THE DETAil OF TRUNNION.
UP TO 75 210 UP TO 75 329 3. SEE DWG. NO. ST-A4-1104
76 TO 125 260 76 TO 125 379 FOR THE DETAil OF CRADLE(RESTING TYPE)
8" 125 TO 175 310 18" 125 TO 175 429
175 TO 225 360 175 TO 225 479 4. SEE DWG. NO. ST-A4-1101
SYMBOL & CODING
PIPE MAT'L
) / )
SUB-TYPE INS. THK "T"
(IF REQ'D)
SUPP'T SERIAL NO. \ S¿E-009 1
....__---ELEV. "F"
PLAN DWG. NO.
....__-----ELEV. "E" SS61E-009
PIPE SIZE "p" - - - - - - - - ' . . . . _ _ - - - - - - - D I M "A"
PLAN ISO

SPRING SS-62 REV.
(T- TYPE ON STRUCTURE) AO
PIPE SIZE "p"
llD. "l.
TRUNNION SIZE "Q"
5~
VENT HOLE
3• 2·
EXISTING BEAM EXISTING BEAM 4• 2"
6" 4"
8' 4•
10· 6"
12· 8"
PIPE SIZE "p" 14" 8"
16" 10"
IN CASE OF EXISTING BEAM ARE 18" 10·
"[" STEEL INSTALL RIB PLA TE AS BELOW
20· 12·
24" 12"
511
VENT HOLE
EID. ·r
EXISTING BEAM
UNIT (mm) NOTE

PIPE SIZE INS.THK "T" H PIPE SIZE INS.THK "T" H PIPE SIZE INS.THK T H 1. MATERIAL
NPS "p" NPS "p" NPS "p" - PARTS DIRECTL Y WELDED TO PIPE :
UP TO 75 130 UP TO 75 210 UP TO 75 303 SAME AS RUN PIPE OR MAT'L TABLE.
2" 76 TO 125 180 8" 76 TO 125 260 16" 76 TO 125 353
125 TO 175 230 125 TO 175 310 125 TO 175 403 PARTS DIRECTL Y
CODE RUN PIPE \liELDED TO PIPE
175 TO 225 280 175 TO 225 360 175 TO 225 453
UP TO 75 145 UP TO 75 237 UP TO 75 329 K API 51.. GR.B, A106 GR.B A283 GR.C OR EQ.
76 TO 125 195 76 TO 125 287 76 TO 125 379 y A335 Pll A387 GR.11 OR EQ.
3• 125 TO 175 245 10· 125 TO 175 337 18" 125 TO 175 429 w A335 P22 A387 GR.22 OR EQ.
175 TO 225 295 175 TO 225 387 175 TO 225 479 X A312 TP304, TP316 A240-304 OR EQ.
UP TO 75
76 TO 125
157
207
UP TO 75
76 TO 125
262
312
UP TO 75
76 TO 125
354
404
z A312 TP321 A240-321 OR EQ.
4• L A333 GR.6 A516 GR.60 OR EQ.
125 TO 175 257 12" 125 TO 175 362 20" 125 TO 175 454
UP TO 75 184 UP TO 75 278 UP TO 75 405 FOR THE DETAil OF TRUNNION.
6" 125 TO 175 284 14" 125 TO 175 378 24" 125 TO 175 505 FOR THE DETAil OF CRADLE(RESTING TYPE)
SYMBOL & CODING
( i )
) 1
PIPE MAT'L
INS. THK 'T"
PLAN DWG. NO. --~ ELEV. "F" 1 S¿E-009 j
PIPE SIZE "p" ----~ ELEV. "E" SS62E-009

DIM "A" - - - - - - - - - - ' DIM "C" PLAN ISO
SPRING SV-33 REV.
PIPING SUPPORT STANDARD DWG. ST-M-1374 (FOR HOT IN SULA TED RISER PIPE,
VfSSEL CLIP AO
A. c 10
(MIN. 600, MAX. 1700)
MIN. 25
QRIENJ_
INS. TBI "T"

SOUTH
\ 85
CLIP#104A/B/C
FURNISHED BY
VESSEL VENDOR
o
"'
ILIV. "I!• ~+----
o
"'
:::;; "'- 12 WELD TO
BRACKET "["
SECTION
UNIT (mm)
CLIP CLIP g hll N K BOLT SIZE 'c'SIZE L' SIZEt-----W_m~ax~(k=g)_ _--;
TYPE MARK A~ 1200 1200 <A ~ 1700
A 104A 150 30 60 45 18 106 42 5/8"x60L C15 A7 4500 4000
NOTE
B 104B 200 45 90 55 21 141 64 3/4"x65L C20 A7 6500 5500
1. MATERIAL
- TRUNNION & REINF. PAD : SAME AS RUN PIPE c 104C 300 75 150 75 28 212 106 1"x65L C30 Al 10500 9000
OR MAT'L TABLE. PIPE SIZE TRUNNION ROO SIZE
- SHAPE STEEL : A36 OR EQ. NPS 'p' NPS ·o· (inch) e
CODE RUN PIPE TRUNNION & REINF.PA[ 2. DIM "M"=(Ax)-85-120-N 6" 4• 5/8' "T'+100 '1+215
K API 5L GR.8, A106 GR.8 API 5L GR.8 OR EQ. DIM 'L'=R- R2 -C 2 a· 4' 3/4" "T"+125 "T'+240
3. SEE DWG. NO. ST-A4-0004 FOR APPLICA TION OF 10· 6" 3/4" 'T'+150 "T'+270
w A335 P22 A335 P22 OR EQ. REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS. 8" 1' 'T" +180 'T' +300
A312 1P304 OR EQ. 12"
X A312 1P304, 1P316 4. SEE DWG. NO. ST-M-1006/1010/1013/1014
14" 8" 1· T+190 "1+310
z A312 1P321 A312 1P321 OR EQ. FOR THE DETAIL OF HANGER ASSEMBL Y.
16" 10· H/4" 'T'+220 "T'+350
- CLAMP, BOL T/NUT 5. SEE Dll'G. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL.
18" 10· 1-1/4" ·r +245 ·r+375
CODE RUN PIPE CLAMP 80LT & NUT
20· 12· 1-1/2" "T" +270 ·¡ +400
K APl-5L GR.8, A106 GR.8 A283 GR.C OR EQ. A307 GR.8 OR EQ.
24" 12· 1-1/2" "1+320 "T'+450
y A335 Ptl A387 GR.11 OR EQ. A193-87 /A194-2H
26" H" 1-1/2' ·r +35o ·r +480
w A335 P22 A387 GR.22 OR EQ. A193-87/A194-2H
28" 14" H/2" ·¡ +370 ·¡+500
30• 16" H/2' ·¡ +400 'T' +530
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
32" 16" 1-1/2" ·r +420 ·r· +550
SYMBOL & CODING
P/S sm. NO. REINF PAD(IF REQ'D)

CLIP TYPE ~~E iA~rkT.
SUPP'T SERIAL NO. "R" ~---DIM
PLAN DWG. NO. (OUTSIDE RADIUS)
~-----
ELEV "F'
PIPE SIZE "p"
~------ ELEV "E"
DIM "A" ~-------- ORIENTATION
(DEGREE) PLAN ISO
SPRING SV- 3 4 REV.
PIPING SUPPORT STANDARD DWG. ST-M-1375 (1/3) (FOR HOT INSULA TED RISER PIPE, AO
VESSEL CLIP)
.l 10
(MIN. 600, MAX. 1700) MIN. 25
INS. Tlll: "T"

SOUTH
14-BOLT & NUT
TRUNNION
PLAN
(TR-2)
"L" SIZE
le. 12 WELD TO
BRACKET "e"
o
u")
CLIP#105A/B/C
FURNISHED BY
VESSEL VENDOR
85
UNIT (mm)
CLIP CLIP
e f g h0 K BOLT SIZE "c"SIZE "L" SIZE f-----Wm_a~x__,(_,kg"--)---1
TYPE MARK A 5.1200 1200 < A 5.1700
A 105A 150 30 60 45 18 42 5/8"x60L C15 A7 4500 4000 PIPE CLAMP
(PC)
B 105B 20 45 90 55 21 64 3/4"x65L C20 A7 6200 5500
c 105C 30 75 150 75 28 106 1"x65L C30 A7 10500 9000
J:illIE
1. MATERIAL 2. DIM "M"=(Aa)-85-120-N
NPS "p" NPS "Q" (inch) e G
- TRUNNION & REINF. PAD : SAME AS RUN PIPE DIM "L "=R- 2 -C 2
OR MA T'L TABLE. 6" 4• 5/8" ·r +100 "T" +215
- SHAPE STEEL : A36 OR EQ. 3. SEE DWG. NO. ST-A4-0004 FOR APPLICATION OF
8" 4• 3/4" "T"+125 "1+240
CODE RUN PIPE UNNION & REINF.PA REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS.
K API 5L GR.8, A106 GR.8 API 5L GR.8 OR EQ. 4. SEE DWG. NO. ST-M-1006/1010/1013/1014 10· 6" 3/4" "T"+150 "T" +270
y A335 P11 A335 P11 OR EQ. FOR THE DETAil OF HANGER ASSEMBLY. 12· 8" 1· ·r +1ao "T"+300
W A335 P22 A335 P22 OR EQ. 5. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL. 14" 8" 1· · r+19o ·r +310
X A312 TP304, TP316 A312 TP304 0R EQ. 16" 10· 1-1/4" ·r +220 ·r+35o
Z A312 TP321 A312 TP321 OR EQ.
18" 10· 1-1/4" "T" +245 "T" +375
- CLAMP, BOLT UT
20· 12· 1-1/2" "T"+270 "T" +400
24" 12" 1-1/2" ·r +320 "T"+450
K APl-5L GR.8, A1D6 GR.8 A283 GR.C OR EQ. A307 GR.8 OR EQ.
26" 14" 1-1/2" "T"+350 "T"+480
Y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
28" 14" 1-1/2" "T" +370 "T"+5oo
W A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
30• 16" 1-1/2" "T"+400 "T"+530
32" 16" 1-1/2" ·r H20 ·r +55o
Z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
SYMBOL & CODING
CLAMP MAT'L
' - - - - - - DIM "R"
PLAN DWG. NO.
(OUTSIDE RADIUS)
PIPE SIZE "p" - - - - - - ELEV "F"
DIM "A" ------' ' - - - - - - - - - ELEV "E"
ORIENTATION--------J
(DEGREE) PLAN ISO

SPRING SV-35 REV.
(FOR BARE RISER PIPE, VESSEL CLIP) AO

L ! 10
(MIN. 600, MAX. 1700) B B
3mm CLEARANCE TYP. G G
SOUTH
PLAN
""
\ 85 M N
CLIP#104A/B/C
FURNISHED BY
VESSEL VENDOR
o
"'o
ILIV. "I• ....
....o
o
,,-,
::::;; ll'. 12 'M:LD TO

BRACKET "e"
PIPE CLAMP
(PC) UNIT (mm)
CLIP CLIP Wmax kg
g hYI N K BOLT SIZE "e "SIZE C 1"SIZE
TYPE MARK A ~ 1200 1200<A~1700
A 104A 150 30 60 45 18 106 42 5/8"x60L C15 C15 4500 4000
NOTE
B 1048 200 45 90 55 21 141 64 3/4"x65L C20 C15 6500 5500
1. MATERIAL c 104C 300 75 150 75 28 212 106 1"x65L C30 C15 10500 9000
- TRUNNION & REINF. PAD : SAME AS RUN PIPE
OR MAT'L TABLE. PIPE SIZE TRUNNION ROD SIZE
NPS •p• NPS "Q" (inch) G B
- SHAPE STEEL · A36 OR EQ
CODE RUN PIPE [TRUNNION & REINF.PA[ 2. DIM "M"=(AJL)-85-120-N 6" 4• 5/8" 100 215 88
2
K API 5l GR.B, A106 GR.8 API 5L GR.8 OR EQ. DIM "L"=R- R2 -C 8" 4• 3/4" 125 240 113
y A335 P11 A335 Pl 1 OR EQ. 3. SEE DWG. NO. ST-M-0004 FOR APPUCA llON OF 150 270 140
10· 6" 3/4"
w A335 P22 A335 P22 OR EQ. REINFORCING PAD AND TRUNNION ALLOWABLE LOADS.
12· a· 1· 180 300 165
X A312 TP304, TP316 A312 TP304 OR EQ. 4. SEE DWG. NO. ST-M-1006/1010/1013/1014 "-:..:._--+----+---+--t---+--
14" !J 1· 190 310 181
z A312 TP321 A312 TP321 OR EQ. FOR THE DETAil OF HANGER ASSEMBLY.
16" 10· 1-1/4" 220 350 207
- CLAMP, BOLT/NUT 5. SEE DWG. NO. ST-M-0001 FOR 1HE SIZE OF SHAPE STEEL.
18" 10· 1-1/4" 245 375 232
CODE RUN PIPE CLAMP 80LT & NUT
20· 12· 1-1/2" 270 400 257
K APl-51. GR.B, A106 GR.8 A283 GR.C OR EQ. A307 GR.8 OR EQ.
24" 12· 1-1/2" 320 450 308
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
26" 14" 1-1/2" 350 480 333
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H
28" 14" 1-1/2" 370 500 359
30• 16" 1-1/2" 400 530 384
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
32" 420 550 410
16" 1-1/2"
SYMBOL & CODING
P/S SID. NO.

CLIP TYPE
SU?P'T SERIAL NO.
REINF PAD(IF REQ'D)
PIPE MAT'L
DIM "R"
~f
PLAN DWG. NO.--~
PIPE SIZE "p" - - - -
(OUTSIDE RADIUS)
L . __ _ _ ELEV "F"
c____ _ _ _ _ ELEV "E"
1 svJ)oos I
DIM "A" ' - - - - - - - - - ORIENTATION
(DEGREE) PLAN ISO

SPRING SV-36 REV.
(FOR BARE RISER PIPE, vtSSEL CLIP) AO
10
(MIN. 600, MAX. 1700) B B
3mm CLEARANCE TYP.
_ORIEt-il
SOUll-1
14-BOLT & NUT TRUNNION

(TR-2)
11'. 12 WELD TO
BRACKET "["
o
"'
El.IV. "Eª S':+---
o
"'
50
85
CLIP 104A C
FURNISHED BY
VESSEL VENDOR
PIPE CLAMP
(PC) UNIT (mm)
CLIP CLIP Wmox (kg)
g hll N K BOLT SIZE "[ "SIZE [ 1 'SIZE
N.Q1I TYPE MARK A 5.1200 1200 <A 5.1700
1. MATERIAL A 105A 150 30 60 45 18 106 42 5/8"x60L C15 C15 4500 4000
- 1RUNNION & REINF. PAD : SAME AS RUN PIPE B 105B 200 45 90 55 21 141 64 3/4"x65L C20 C15 6200 5500
OR MAT'L TABLE.
c 105C 300 75 150 75 28 212 106 1'x65L C30 C15 10500 9000
CODE RUN PIPE 1RUNNION & REINF.PA[ 2. DIM "M";(AJL)-85-120-N PIPE SIZE TRUNNION ROO SIZE
NPS "p" NPS "Q' G
K API 5l GR.B, A106 GR.B API 5L GR.B OR EO. DIM 'L' ;R- R2 -C 2 (inch)
y A335 P11 A335 P11 OR EQ. 6' 4• 5/8' 100 215 88
3. SEE DWG. NO. ST-M-0004 FOR APPLICA TION OF
w A335 P22 A335 P22 OR EQ. REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS. 8' 4• 3/4' 125 240 113
X A312 TP304, TP316 A312 TP304 OR EQ. 4. SEE DWG. NO. ST-M-1006/1010/1013/1014 10· 6" 3/4" 150 270 140
z A312 TP321 A312 TP321 OR EQ. FOR THE DETAil OF HANGER ASSEMBL Y. 12" 8" 1" 180 300 165
- CLAMP, BOLT/NUT 5. SEE DWG. NO. ST-M-0001 FOR THE SIZE OF SHAPE STEEL. 14" 8' 1· 190 310 181
CODE RUN PIPE CLAMP BOLT & NUT 16" 10· 1-1¡.~· 220 350 207
K APl-51.. GR.B, A106 GR.B A283 GR.C OR EQ. A307 GR.B OR EQ. 18" 10· 1-1/4" 245 375 232
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H 20· 12· 270 400 257
1-1/2"
w A335 P22 A387 GR.22 OR EQ. A193-87 /A194-2H 24" 12· 1-1/2" 320 450 308
X A312 1P304, 1P316 A240 1P304 OR EQ. A193-87 /A194-2H 26" Ji" 1-1/2" 350 480 333
z A312 1P321 A240 1P321 OR EQ. A193-B7 /A194-2H 28" 14• 1-1/2' 370 500 359
30" 16" H/2" 400 530 384
SYMBOL & CODING 32" 16" 1-1/2" 420 550 410
P/S sm. NO.

REINF PAD(IF REQ'D)
SUPP'T SERIAL NO. DIM "R"
PLAN DWG. NO.--~ (OUTSIDE RADIUS)
PIPE SIZE 'p' ' - - - - - ELEV "F'
' - - - - - - - ELEV "E"
DIM "A" ~------ ORIENTATION
(DEGREE) PLAN ISO
REV.
ST-A4-1376
SPRING SV-51
PIPING SUPPORT STANDARD DWG. (FOR COLO INSULA TED RISER PIPE,
VESSEL CLIP) AO
L 8
(MIN. 1100, MAX. 1700)
MIN. 25
PLAN "'
BOLT HOLE "h0"
200 280
SECTION X-X SECTlON Y-Y
G G
ll.IV. , .
REINF. PAD
(SEE NOTE 3)
ll.IV. .,. TRUNNION
SECTlON
(TR-2)
UNIT (mm)
B e G E
NOTE T+110 "T"+295 T+505 130
1. DIM "M"=(Ap-125-98 "T"+135 "T"+320 T+530 130
2
DIM "L"=R- -C "T" +165 "T" +345 T +555 155
2. MATERIAL
- TRUNNION & REINF. PAD : SAME AS RUN PIPE
OR MA T'L TABLIE.
CODE RUN PIPE TRUNNION & REINF. PAD
L A333 GR.1 OR 6 A333 GR.6 OR EQ.
X A312 TlP304, TlP316 A312 TlP304 OR EQ.
- CLAMP, BOLT/NUT "T" +385 "T" +565 "T" + 775 250
·r H 10 ·r+ 590 ·r+ 800 250
A307 GR.B OR EQ.
"T"+435 "T"+615 "T"+825 250
K APl-5L GR.B, A106 GR.B A283 GR.C OR EQ.
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H UNIT (mm)
w A335 P22 A387 GR.22 OR EQ. A193-B7 /A194-2H
CLIP CLIP Wmox (kg)
X A312 TP304, TP316 A240 TP304 OR EQ. A193-87 /A194-2H TYPE MARK a d g h0 "e• SIZE "L" SIZE f-.-.-A-~-1-2-00~1-200'--"'-<-A-~-1-70-10
z A312 TP321 A240 TP321 OR EQ. A193-B7 /A194-2H A 123A 230 220 190 106 18 C15 A7 3600 3200
B 1238 280 290 240 141 21 C20 A7 5200 4400
3. SEE DWG. NO. ST-M-0004 FOR APPLICATION OF
REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS. C 123C 380 430 340 212 28 C30 A7 8400 7200
SYMBOL & CODING

CLIP TYPE PIPE MA T'L
supp'T SERIAL NO. INS. THK "T"
PLAN DWG. NO. (NOT CRADLIE THK"H")
'-----DIM "R"
PIPE SIZE "p" (OUTSIOE RADIUS)
DIM "A" ------'
ORIENTATION - - - - - - - - ' ' - - - - - - DIM "F"
DEGREE ' - - - - - - - - ELEV "E" PLAN ISO
REV.
SPRING SV-52
AO
B
PLAN SECTION X-X SECTION Y-Y
NUTS 'M:LD TO IP
FURNISHED BY
VESSEL VENOOR
TRUNNION "Q"
REINF. PAD
(SEE NOTE 3)
TRUNNION
ILIV "!ª
(TR-2)
UNIT (mm)
: 45· NPS "p" NPS "Q" (inch) B c G E
1 CLEVIS
,,BRACKET 6" 4" 1/2" "T"+110 "T" +295 "í+505 130
i (CLS) 8" 4• 1/2" 'T+135 "T" +320 "T"+530 130
' 10· 6" 1;2· 'T+165 "T" +345 "T" +555 155
NOTE -~--~~ 1--'-=---t---::--+-"-=---+:--,,.----+~-+---'-'-"-+---"-"-1
12" 8" "T" +190 'T+375 "T" +585 180
1. DIM "M"=(A+L)-125-98 ' PIPE CLAMP
DIM "L"=R-~ PCC 14" 8" 'T+205 "T" +390 +600 180 ·r
16" 10" "í+230 'T+415 "T" +625 210
2. MATERIAL
- SHAPE STEEL : A36 OR EQ. 18" 10" "T" +255 "T" +440 "T" +650 210
- TRUNNION & REINF.PAD : SAME AS RUN PIPE OR TABLE. 20" 12· ·r
+280 "T" +465 "í+675 235
CODE RUN PIPE TRUNNION & REINF. PAD 24" 12· "T"+330 "T" + 515 "T" + 725 235
K API 5L GR.B, A106 GR.B API 5L GR.B OR EQ. 26" 14" "T" +355 "T" +540 "T" + 750 250
L A333 GR.1 OR 6 A333 GR.6 OR EQ. 28" 14" "T"+385 'T+565 "T" + 775 250
X A312 TP304, TP316 A312 TP 304 OR EQ. 30" 16" "T" +410 "T" +590 "í+800 250
- CLAMP, BOL T/NUT 32" 16" "T''+435 "T"+615 "T" +825 250
COOE RUN PIPE CLAMP BOlT & NUT UNIT (mm)

CLIP CLIP Wmax (kg)
K APl-5L GR.B, A106 GR.E A283 GR.C OR EQ. A307 GR.B OR EQ. o b d e g h~ ~e· SIZE "L" SIZE
TYPE MARf A ~ 1200 1200 < A ~ 1700
y A335 P11 A387 GR.11 OR EQ. A193-87 /A194-2H
A 124A 230 220 190 9 106 18 C15 A7 3600 3200
w A335 P22 A387 GR.22 OR EO. A193-87 /A194-2H
B 124B 280 290 240 9 141 21 C20 A7 5200 4400
z A312 TP321 A240 TP321 OR EQ. A193-87 /A194-2H
c 124C 380 430 340 9 212 28 C30 A7 8400 7200
3. SEE DWG. NO. ST-M-0004 FOR APPLICATION OF 5. SEE DWG. NO. ST-M-0001 7. SEE DWG. NO. ST-M-1019
REINFORCING PAD ANO TRUNNION ALLOWABLE LOADS. FOR THE SIZE OF SHAPE STEEL. FOR THE DETAil OF CRADLE.
4. SEE 0\1/G. NO. ST-A4-1006/1010/1013/1016 FOR THE DETAil ANO 6. SEE DWG. NO. ST -A4-1021
ALLOWABLE LOAD OF HANGER ASSEMBL Y. FOR THE DETAIL OF URETHANE BLOCK ASSEMBL Y.
SYMBOL & CODING

PLAN DWG. NO. (NOT CRADLE THK"H")
~---DIM "R"
PIPE SIZE "p" (OUTSIDE RADIUS)
DIM "A" -------' ~----- DIM "F"
ORIENTATION - - - - - - - - ' ' - - - - - - - - ELEV "E"
DEGREE PLAN ISO
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1381 FIELD SUPPORT FS-1 AO
-'
o-' o
en
en
:::¡ TYPE SUPPORTING METHOD SUPPORTING DIRECTION
>-
(/)
~
(/)
1 MEMBER A7 s
r- -
_J
w
w
1---
(/)
A
1• · 1
UPWARD DOWNWARD SIDEWARD
L:Jw 1---
w
O:'.
u
z
-f [§T
T
FS1 1 S-009-13001-A500-8300
~DIMENSIC>'l'A'
Ta1uENsie>'l 's'
PLAN DWG. NO.
S\JPP'T SERIAL NO.
o S'rll.l<l. (f SlffOlTING IE1HOO
u SYMBOl OF T'i'PE
SUPPORT DIRECTION MA Y BE \6 - i!"-. EXPANSION ~------ FIELD SUPPORT
OECIOED BY FIELD CONDITION. ~f-"-..ANCHOR
01/2" PLATE DETAil EXPLANA TION OF TYPICAL SUPPORT COOING.
~ MEMBER: ,. ·¡
A
Al
~
]
_J
~
w
w :r:
1---
1 · A • 1 (/)
, _____,I
UPWARD DOWNWARO SIDEWARD
I
, . A
L:J l:'w:l
•1
~ r1-1T>m-TA500-~ ~~~~~ :~:
_ -
DIMENSION 'A'
" 1 PLAN DWG. NO.
O:'. :r: EXPANSION
u ANCHOR SUPP'T SERIAL NO.
z Sll8l. IJ Sl.mJllttG IElHOO
o
u ;0112·
~------- SYMBOL OF T'J'PE
SUPPORT DIRECTION MAY BE L - - - - - - - - - FIELD SUPPORT
DECIDED BY FlELD CONOITION.
) ·~~ PLA TE DETAil EXPLANATION OF TYPICAL SUPPORT COOING.
~ MEMBER
~ 10~[(]~
A
Al
__I · · 1
,___
r.:I'-.=====;¡¡/
_J
1· A •I
w
l:'(/):l :r: 1
/
)~<~~-(t----~~+--~---;
UPWARD OOWNWARD SIOEWARO
I
4-flf HOLES
--¡ l@T
T
0
FS1 M S-009-13001-ASOO-HSOO
L:J l:':l I" A • 1
~DIMENSION'A'
LrnMENs10N 'H"
- w
O:'.
u :r:
I'-. / -
N PLAN DWG. NO.
SUPP'T SERIAL NO.
z
o S'!\IBQ Cf SUPl'ORTING MElHOO
u ~ S'tMBOl OF T'i'PE
SUPPORT DIRECTION MA Y BE )
1
~ ) 20 120 20 ' - - - - - - - - - F I E L D SUPPORT
OECIDED BY FIELO CONOITION. ~~7~9R 1---P-LA_TE_O_ET_A_IL---+-E-X-PL_A_N-AT-IO_N_O_F_TYP_IC_A_L_S_U_PP-O-RT-CO_O_IN-G-.---"
SYMBOL & CODING
PLAN ISO
---------------------------------------------------
REV.
PIPING SUPPORT STANDARD DWG. ST-A4-1382 FIELD SUPPORT FS-2 AO
_J _J
o o
OJ OJ
TYPE SUPPORTING METHOD SUPPORTING DIRECTION
n
:::;
>-
IJ)
~
IJ)
UBT
~]~
T MEMBER : A7
ji 1 1
~-H.,,n===r'l ,: 1
1
1
1 UPWARD SIDEWARD
I 1
1
~ lio09-T13001-TA300T-T DIMENSION "H"

1 :
1
w
1
1
1
1 i 1 L__= DIMENSION "8"
-~"-- DIMENSION "A"
EXPANSION PLAN Dllt. NO.
¡;
ANCHOR
SUPP'T SERIAL NO.
SlllOO. IJ ~Jt«; IEllQ)
SUPPORT OIRECTION MA Y BE 20 120 20 ~ - - - - - - - - S Y M B O L OF T'r'PE
- - - - - - - - - F l E L D SUPPORT
DECIDED BY FIELD CONDITION.
1 ) 1 1 ~!) PLATE DETAil EXPLANA TION OF TYPICAL SUPPORT CODING.
~ MEMBER : A7 ¡ ~t----1~A -1
1 UPWARD
FS2 V S-009-13001-A600-8300
-~l~T
T
~ TDIMENSION ·s·
DIMENSION "A"
PLAN Dllt. NO.
SUPP'T SERIAL NO.
S'r\jBQL (f SUPPORTING METHOO
SYMBO.. OF T'r'PE
SUPPORT OIRECTION MAY BE - - - - - - - - FlELD SUPPORT
DECIDED BY FIELD CONDITION.
&BR
PLA TE DETAil EXPLANATION OF TYPICAL SUPPORT CODING.
~ A5
w :
--r
1
~ D
CD
- .... t-
__J
e= ~
w 1
w :r: 1
1-- 1
(/) 1
. ·s· 100x100x6t 140x140x6t

) )
~'"\~~ ' 1·
1-11r
25
30
e
1
:
UPPER PLATE LOW PLATE
FS2 K C-009-13001-HSOO
'i \-'
w -~¡~-~··
1/2 20 -~r
w OJ 1
OJ 1
1
1
\
\
'....._
1--
w
et:
-t--
t-- 1-EXPANSION PLAN 01\t. NO.
' r- -
-- L ~~
u 1
1 SUPP'T SERIAL NO.
1 z :r:
1 SUPPORTING METHOO
:r: 1 o
u
~
SYMBQ OF T'r'PE
'l..--'- 20 120 20 FlELD SUPPORT
) ~)
1
SUPPORT DIRECTION MAY BE 1
DECIDED BY FIELD CONDITION. PLATE DETAil EXPLANA TION OF TYPICAL SUPPORT CODING.
SYMBOL & CODING
PLAN ISO
STANDARD PIPE SUPPDRT, 3607/32-SD-5100
REV
SLIDE UNIT
(FOR LOW FRICTION)
SU-1 - AO
~-----!------~
A
e
1· 1. · 1 • ¡
-.~=r-=-~-
]
TOP PLATE ASSEMBLY
•
i EXISTI'G SHDE ~
~~~m~~~~~~ ~
r-; ~~~~~~~
---¡ í-- r
6 V
\ 1\ BOTTOM PLATE ASSEMBLY /
' 4-M4x10
: 1: GRAPH!TE (6tl
Jll-- 1
STEEL PLATE (6t)
PIPE SIZE TOP PLATE TOP GRAPHITE BOTTOM PLATE BOTTOM GRAPHITE
NPS 'P' A B e D A B e D
3' - 6' 250 100 200 80 250 100 200 80
8' 250 100 200 80 250 100 200 80
10' 250 100 200 80 250 100 200 80
12' 250 150 200 100 250 150 200 100
14' 250 150 200 100 250 150 200 100
16' 250 150 200 100 250 150 200 100
18' 250 250 200 200 250 250 200 200
20' 250 250 200 200 250 250 200 200
22' 250 250 200 200 250 250 200 200
24' 250 250 200 200 250 250 200 200
NOTE
l. MATERIAL
- STEEL PLATE : A36 OR EQ.
- GRAPHITE &. BOLTS : MANUFACTURER STANDARD.
SYMBOL & CODING
1
~lli_-_LlQfil_-4.
1
) o )
y(
P/S STD. NO.
PLAN DVG. NO.
PIPE SIZE 'P'
~ ~
PLAN ISO
------------
REV
SUDE UNIT
(FOR LOW FRICTION)
SU-2 AO
PIPE SIZE SUPPDRT TOP PLATE TOP GRAPHITE BDTTDM PLATE BDTTDM GRAPHITE
NPS 'P' PIPE A B e D A B e D
3' 2· 100 100 80 80 100 100 80 80
4' 2· 100 100 80 80 100 100 80 80
6' 4' 100 100 80 80 100 100 80 80
8' 4' 100 100 80 80 100 100 80 80
10' 6' 150 150 100 100 150 150 100 100
12' 8' 200 200 150 150 200 200 150 150
14' 8' 200 200 150 150 200 200 150 150
16' 10' 250 250 200 200 250 250 200 200
18' 10' 250 250 200 200 250 250 200 200
20' 12' 300 300 250 250 300 300 250 250
24' 12' 300 300 250 250 300 300 250 250
NOTE
l. MATERIAL
- STEEL PLA TE : A36 OR EQ.
- GRAPHITE &. BDLTS : MANUFACTURER STANDARD.
SYMBOL & CODING
) o
P/S STD. NO. --~ ~-- PIPE SIZE 'P'

PLAN DIJG. NO. - - - - - - - - '
PLAN ISO
REV
PIPING SUPPORT STANDARD DWG. ST-A4-1392 STIFFNER PLATE STF -1
(FOR SUPPORT REINFORCING) AO
EX!STING SUPPDRT DR .1 1. ti
~ T FIELD .1
STRUCTURE MEMBER
1. ADJUST
.11. ti
1. ADJUST ~ T FIELD .1
MEMBER S!ZE ti
CIO 6
CIO 6
CIO 6
CHANNEL
CIO 9
CIO 9
CIO 9
HIO 6
H12 6
H15 9
H-BEAM H17 9
H20 12
H25 12
H30 12
NOTE
1. MATERIAL
- A36 DR EQ.
SYMBOL & CODING
1 ~Jil-J.3!!fil_-tJ21J 1
) o
P/S STD. NO - - - ' '------- MEMBER SIZE

PLAN D'w'G. NO. ----~
PLAN ISO
---------------------------------~----~--
REV.
RESTING VRS-15
(FOR CLASS 150 VALVE¡llANGE) AO
O.O
B.C.D
w
ELEV "E"
..___ F
:r:
]
w A
~
:r:
f-
E
E
D
B
t
e
NOTE
1. MATERIAL
PLA TE : A283 GR.C OR EQ
2. THE DIMENSIONS RELA TED l'llTH FLAN GES SHALL BE AS PER ASME 816.5 CU 50. UNIT (mm)
PIPE A B e D E F G H K p ~d1 d2 O.D B.C.D t(mm) W(Kg) F(Kg)

SIZE
2" 130 100 30 50 50 120 40 150 30 45· 85 20 152.4 120.6 6 600 180
3" 150 100 30 50 50 170 40 210 30 45· 115 20 190.5 152.4 6 1100 340
4" 120 100 30 60 60 155 20 230 30 22S 142 20 228.6 190.5 6 1500 460
6" 140 150 50 70 70 140 35 235 30 22S 200 24 279.4 241.3 9 2100 630
8" 160 150 50 70 70 145 40 267 30 22S 253 24 342.9 298.4 9 2400 720
PIPE SIZE "p"
TYPE "A" TYPE "B" TYPE "e"
SYMBOL & CODING
P/S STD. NO.

TYPE ELEV "E"
' - - - - - PIPE SIZE "p"
SUPP'T SERIAL NO. - - - - ' RS91A-3301
PLAN DWG. NO.
ISO

RESTING VRS-15 REV.
(FOR CLASS 150 VAL VE/FLANGE) AO
O.O
B.C.D
ELEV "E" w
+
.,.___ F
I
LL
3
1. A .1
E
1L-º-IJ~I
~THK.
G E
N
NOTE
1. MATERIAL
PLATE : A283 GR.C OR EQ
2. THE DIMENSIONS RELATED 'MTH FLANGES SHALL BE AS PER ASME 816.5 CL150. UNIT (mm)
PIPE
SIZE
A B e D E F G H K p ~d1 d2 o.o B.C.D W(Kg) F(Kg)
10· 200 200 50 110 90 228 352 318 15· 30- 312 27 406.4 362 2670 800
12· 200 200 50 110 90 251 418 356 15· 30- 373 27 482.6 431.8 2830 850
14" 200 200 50 110 90 265 462 382 15º 30· 407 30 533.4 476.3 3160 950
16" 200 200 50 110 90 244 422 420 11.25' 22.5" 464 30 596.9 539.8 3160 950
18" 240 240 80 130 100 250 449 443 11.25º 22.5" 512 33 635 577.9 3500 1050
PIPE SIZE "p"

TYPE "B" - AL TERNA TE
TYPE "A" TYPE "B"
SYMBOL & CODING
P/S SID. NO.

TYPE ELEV "E"
~---PIPE SIZE "p"
SLJpp'T SERIAL NO. ---~ RS91A-3301
PLAN OWG. NO.
ISO
RESTING VRs - 15 REV.
(FOR CLASS 150 VALVE/FLANGE) AO
o.o
B.C.D
· 1· 1
ELEV "E"
w
+
:r: -+-- F
LL
wQ6
~
:r:
f-
I. A
.I E
E
1 D
11
e
16mm THK.
.1
CD
G B
NOTE
1. MATERIAL
2. THE DIMENSIONS RELA TED WITH FLANGES SHALL BE AS PER ASME 816.5 CU 50. UNIT (mm)
PIPE 8 e o E F G H K p ~dl d2 o.o 8.C.D W(Kg) F(Kg)

SIZE A
20· 300 300 100 150 100 293 568 475 9· 18' 566 33 698.5 635 4100 1250
24" 300 300 100 170 100 320 658 532 9' 18' 670 36 812.8 749.3 4500 1370
PIPE SIZE "p"

TYPE "8"- ALTERNATE
TYPE "A" TYPE "B"
SYMBOL & CODING
RS91A-3301-13033-2"-E18500
P /S SID. NO.
TYPE ELEV "E"
~---PIPE SIZE "p"
PLAN DWG. NO.
ISO

RESTING VRS-15 REV.
(FOR CLASS 150 VAL'vf¡lliNGE) AO
ELEV "E"
w
i
::r: .._ F
LL
w[cl6
l. A l. D .[[_e .1
G B
NOTE
1. MATERIAL
2. TI-IE DIMENSIONS RELATED 'MTI-1 FLANGES SHALL BE AS PER ASME 816.47 SEREIS "A" CL150. UNIT (mm)
PIPE
SIZE A B e D E F G H K p 9ld1 d2 O.D B.C.11 W(Kg) F(Kg)
28" 400 400 120 230 120 345 725 614 6.43" 12.86" 400 36 927.1 863.6 19
30" 400 400 120 230 120 360 770 642 6.43" 12.86" 422 36 984.3 914.4 19
32" 450 400 150 250 150 409 829 710 6.43" 12.86" 447 42 1060.5 977.9 22
36" 450 400 150 250 150 463 971 764 5.63" 11.25" 501 42 1168.4 1085.9 22
PIPE SIZE "p"
TYPE "A" TYPE "B"
SYMBOL & CODING
P/S STO. NO.

TYPE ELEV "E"
- - - - PIPE SIZE "p"
SUPP'T SERIAL NO. ---~ RS91A-3301
PLAN DWG. NO.
ISO

RESTING VRS-30 REV.
(FOR CLASS 300 VAL'lf/FLANGE) AO
O.O
B.C.D
w
ELEV "E"
~
Ge I
..,__ F
~
]
l.
wA .1
I
Y'.
f---
E
E
o
D
B
t
e
NOTE
1. MATERIAL
2 THE DIMENSIONS RELATED 'MTH FLANGES SHALL BE AS PER ASME 816.5 CL.300. UNIT (mm)
PIPE A B e D E F G H K p ~d1 d2 O.D 8.C.D t(mm) W(Kg) F(Kg)

SIZE
2" 100 100 30 50 50 110 25 158 15 22.5" 91 21 165.1 127.0 9 1.300 390
3" 120 100 30 50 50 115 25 180 20 22.5" 125 24 209.6 168.1 9 1700 520
4" 130 100 30 60 60 135 30 212 30 22.5" 153 24 254.0 200.2 9 2000 600
6" 140 150 50 70 70 140 35 254 30 15· 213 24 317.5 269.7 9 2300 700
8" 160 200 70 70 70 145 40 286 30 15· 268 26 381 330.2 9 2830 850
PIPE SIZE "p"
TYPE "A" TYPE "8" TYPE "e"
SYMBOL & CODING
P/S STD. NO.

TYPE ELEV "E"
~---PIPE SIZE "p"
PLAN DWG. NO.
ISO
REV.
RESTING VRS-30
(FOR CLASS 300 VALVE/FLANGE) AO
O.O
B.C.D
ELEV "E" W1
~
I
--w2
1. A
.1 E
G E
N
NOTE
1. MATERIAL
2. THE DIMENSIONS RELATED 'WlTH FLANGES SHALL BE AS PER ASME 816.5 CL300.
UNIT (mm)
PIPE A B e D E F G H K p ~d1 d2 O.D B.C.D W(Kg) F(Kg)

SIZE
10" 200 200 50 110 90 210 314 338 11.25º 22.5" 327 30 444.5 387.4 2950 885
12· 200 200 50 110 90 228 368 375 11.25º 22.5" 381 33 520.7 450.9 3050 915
14" 200 200 50 110 90 220 343 408 9· 18º 433 33 584.2 514.4 3260 978
16" 200 200 50 110 90 238 381 449 9· 18" 490 36 647.7 571.5 3260 978
18" 240 240 80 130 100 235 356 481 7.5" 15" 540 36 711.2 628.7 3600 1080
PIPE SIZE "p"
T'rPE "A" TYPE "B" T'rPE "C"
SYMBOL & CODING
P/S STD. NO.

TYPE ELEV "E"
~---PIPE SIZE "p"
PLAN DWG. NO.
ISO

RESTING VRS-30 REV.
(FOR CLASS 300 VAL VE/FLANGE) AQ
O.O
B.C.D
· 1· !
l 1·
ELEV "E"
w
+
I .__ F
u_
wQ6
~
I
I. A
.I f-
(.!)
E
E
l. o .16mm
ll .c .1 THK.
G B
NOTE
1. MATERIAL
2. Tl-IE DIMENSIONS RELATED ~TH FLANGES SHALL BE AS PER ASME 816.5 CUOO. UNIT (mm)
PIPE A B e D E F G H K p !idl d2 O.O B.C.O W(Kg) F(Kg)

SIZE
24" 300 300 100 170 100 307 646 573 7.5' 15" 708 42 914.4 812.8 4800 1440
20" 300 300 100 150 100 275 548 502 7.5' 15" 595 36 774.7 685.8 4400 1320
PIPE SIZE "p"
TYPE "A" TYPE "B"
SYMBOL & CODING
RS92A-3301-13033-2"-E18500
P/S sm. NO.

TYPE ELEV "E"
~--PIPE SIZE "p"
PLAN DWG. NO.
ISO
REV.
CLIP FOR PIPE SUPPORTS
PIPING SUPPORT CLIP DWG. ST-A4-2001 (CLIP NO. 101A/B,102A/B & 103A/B) AO
;. a0~TYP.
"ºV-----~J-.
180º
ORlENT
PLAN PLAN
75 40
BOLT HOLES
BOLT HOLES
ELEV.
CLIP #101 A,11 CLIP #102 A,11 CLIP #103 A,11

CLIP CLIP CLIP
b MARK
a MARK
MARK
101A 30 20 18 102A 30 20 18 103A 100
101B 40 35 21 102B 40 35 21 103B 150
J==~==:tF~P LOADING LOADING
1) DEGREES OF ORIENTA TlON ARE MEASURED IN CLOCKWISE FROM

PLANT NORTH.
2) THE STRESS CHECK FOR VESSEL WALL \l¡}IERE CLIPS ARE WELDED
SHALL BE PERFORMED BY MANUFACTURE.
3) THE NECESSITY OF REINFORCING PAD SHALl BE CHECKED BY VESSEL
VENDOR ANO IF REQUIRED REINFORCING PAD, VESSEL MANUFACTURE
SHOULD ATTACH TO VESSEL.
UNIT (mm)
REV. MARK CLIP CLIP VESSEL LOADS (Kg)

UNE NO. ORIENT F c D L
NO. NO. MARK MAT'L NO. w p F
REV.
PIPING SUPPORT CLIP DWG. ST-A4-2002 (CLIP NO. 104 A,B & C) AO
TYPICAL
DIMENSION IN ( ) ARE FOR
9 V (12)
CLIP #104C.
N
o· a<f·
.~ 'r;} ~ o
270· ' _:_fil( _______ - - - - - - -~_Q_RJENT __
u
1 ,'-......._
180'
PLAN
85 50
~¡ 111 ='° :-h0 BOLT HOLE
w FC·~· ·~
~ ~
:z
::::;
1- t
:z
w
(.'.)
:z
~o·~
;::
:::.
LL ~ ~
l-
o o CLIP #104 A,B,C
a:i
N UNIT lmm)
:::.
o CLIP
e: MARK j a b t h~ e f g k
_J
~
104A 150 424 400 12 18 30 60 70 42
104B 200 488 440 12 21 45 90 80 64
_ _,_--:.- <:S
1 "'
104C 300 615 520 16 28 75 150 100 106
5'
\ 4-h0 BOL T HOLE
CUP 110. u.e
1) DEGREES OF ORIENTA TlON ARE MEASURED IN CLOCKWlSE FROM

PLANT NORTH.
2) THE STRESS CHECK FOR VESSEL WALL WHERE CLIPS ARE WELDED
SHALL BE PERFORMED BY MANUFACTURE.
3) THE NECESSITY OF REINFORCING PAD SHALL BE CHECKED BY VESSEL
VENDOR ANO IF REQUIRED REINFORCING PAD, VESSEL MANUFACTURE
SHOULD ATTACH TO VESSEL.
UNIT (mm)
REV. MARK VESSEL LOADS (Kg)
UNE NO. CLIP ORIENT CLIP F c D
NO. NO. MARK MATL NO. w p F
--------------- -----------------------~----------··
REV.
PIPING SUPPORT CLIP DWG. ST-A4-2003 (CLIP NO. 105A,B & C)
AO
TYPICAL
-9 V (12)
DIMENSION IN ( ) ARE FOR
N .¿ ., CLIP #105C
o·
~ J
, ~l,
\:,?:,· (,\ o
270{' dJ2:_ ______ ~~--- -tQRIENJ_ o o
'
..........
u w w
1
180º
PLAN
~ f ~~~,º 4p
LOADING
4-h(ll BOL T HOLE
/
O'
1 45·
~
'°,;;
1 ºo
- 1:1="==-
1
So
o "'
OC>
: "-.1 .-, CLIP #105 A,B,C
w ~
z
:::; "" 1 r ,'
>---
~
1 ... CLIP hJ21
z j a b t e f g k
w ~== "- MARK
<.:l
z o 105A 150 424 400 12 18 30 60 70 42
..:
>--- N
::::; 105B 200 488 440 12 21 45 90 80 64
l.J..._ ~::E
>---
o 105C 300 615 520 16 28 75 150 100 106
CD
-~~
::::;
i
o
""
u..
....J
.!:'.'.,
¡
1~1- - ·-:
o
~¡
85
f 55
50
'<1-
3-h(ll BOLT HOLE
ELEV
CLIP #105 A,11,C
NOTE
1) DEGREES ORIENTA TION ARE MEASURED IN CLOCKWISE FROM PLANT NORTH.
SHALL BE PERFORMED BY MANUFACTURER.
3) REQUIRED WITH REINFORCING PAD OR NOT OF SUPPORT CLIP SHALL BE
CHECKED BY VESSEL VENDOR ANO IF REQUIRED REINFORCING PAD,
VESSEL MANUFACTURER SHOULD ATI ACH IT ON VESSEL.
p
UNIT (mm)
REV. MARK CLIP CLIP VESSEL LOADS (Kg)
UNE NO. ORIENT F c o L M
NO. NO. MARK MAT'L NO. w F
CLIP FOR PIPE SUPPORTS REV.
(CUP NO. 121, 122A,B)
PIPING SUPPORT CLIP DWG. ST-A4-2004
(-46' & UNDER COLD PIPING) AO
210{
0
N
. ~.ORl~l
66 ~
T'IP.
4-5/8" NUTS
'.~ej
270
A
~TYP.
~
~TYP.
o
ORIENT
- - - - - --t---
180'
1:~:;,¡"""&
u
180 -
=
PLAN
~125
1
9
70
4-180 BOL T HOLE
""'75 1
~ "'\ f°°r
125
PLAN
a 1
1
~
4-180 BOLT HOLE
""'75 1
"\:.
f°ºr
125
~ªb - -~·_.¡ ~ªb --{ - ~~·~¡

;· -~~=i
1
_J1 -
~~~~=i
1 1
1 _J
-ibJ d
w
z
::J
>-
z
w
ªn_J 1 -
g ~
w
z
::J
>-
z
w
ª' _J
1
1
g u
('.) ('.)
z ELEV. z ELEV.
u...~ u...~
::::;; ::::;;
o o CLIP MARK a
>-
>-
o CUP f121 I=
o CUP #122!,B
CD CD 122 A 180
::::;; ::::;;
o o 122 B 230
"'u... "'u...
__j
__j
w
w
w w
"l,Q
L L
1·
8=-- .lF &-p
1· w w
--
LOADING
8=-- --
LOADING
Lb]p
---
NOTE
1) DEGREES ORIENTATION ARE MEASURED IN CLOCK'MSE FROM PLANT NORTH.
SHALL BE PERFORMED BY MANUF ACTURER.
3) REQUIRED 'MTH REINFORCING PAD OR NOT OF SUPPORT CLIP SHALL BE
CHECKED BY VESSEL VENDOR AND IF REQUIRED REINFORCING PAD,
VESSEL MANUFACTURER SHOULD ATIACH IT ON VESSEL.
4) NUT MATERIALS ARE A194 GR.4 ANO SCREW THREADS SHALL BE IN CONFORMANCE 'MTH
ANSI 81.1, UNC 2A/2B FOR THE COARSE THREAD SERIES.
UNIT (mm)
REV.
NO.
MARK
NO.
UNE NO.
CLIP
MARK
ORIENT
CLIP
MAT'L
F e o L
VES SEL
NO. w
p
LOADS (Kg)
F
STANDARD PIPE SUPPORT , 3607 /32-SD-5100
REV.
PIPING SUPPORT CLIP DWG. ST-M-2005 (CLIP NO. 123A,B,C 124A,B,C) AO
TYPICAL
/ g v (12) DIMENSIONS IN ( ) ARE
4-NUTS FOR #123C, 124C
(¡a~ CLIP #123A,B,C #124A,B,C

UNIT mm)
..,..__ bd
CLIP MARK a b t ~ NUT
o
123,124 A 230 220 12 18 5/8"
270 _____ _,__ORIE.Nl_
123,124 B 280 290 12 21 3/4"
180º ~ u 123,124 c 380 430 16 28 1"

) - -
/Abl
~~ 125 70
PLAN
4-hJll BOLT HOLE
"Z f°l l
TYPICAL
""'75
~
DIMENSIONS IN ( ) ARE 1 ,Z5
9 V (12)
FOR #123C, 124C
L
w w
>--~·~!
1
8--i-
~=-bF
;~~~=i
@• T .-..JJP
r----c -~Q
ºs , _,.......i.I'-- 11 11
Jill._
~
w 11 11
z g
~ ~
::::;
1-
z
w 4-h!O BOLT HOLE @
'-"
~~I
z
«
1-
Z5
~ ~
~~w
LL.
::::;;
o
~
o ,_....,. f8ºr 1
m 1 ., 1 11 11
- ::::;;
o - @-1
1
d ;·-~+-.~=t
>-- 1 i>--f-+- 1 L 1
11 w 11
~F
°"
0==-~
LL.
__j - --+11
__ +--
w
s
o ; 1
® F
g l ..280.. ll-9
LOADING
ELEV. ---
(#123 A, B. C)
NOTE
1) DEGREES OF ORIENTATION ARE MEASURED IN CLOCKWISE FROM
PLANT NORTH.
SHALL BE PERFORMED BY MANUFACTURER.
3) THE NECESSITY OF REINFORCING PAD SHALL BE CHECKED BY VESSEL
VENDOR ANO IF REQUIRED REINFORCING PAD, VESSEL MANUFACTURER
SHOULD ATT ACH TO VESSEL.
4) NUT MATERIALS ARE A194 GR.4 ANO SCREW THREADS SHALL BE IN CONFORMANCE WITH
ANSI B1.1. UNC 2A/2B FOR THE COARSE THREAD SERIES.
UNIT (mm)
CLIP CLIP VES SEL LOADS (Kg
REV. MARK
UNE NO.
ORIENT F e D L
NO. NO.
MARK MAT'L NO. w p F

Pipe Support STD

Uploaded by

Copyright:

Available Formats

Pipe Support STD

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Pipe Support STD

Uploaded by

Copyright:

Available Formats

NATIONAL IRANIAN OIL ENGINEERING

AND CONSTRUCTION COMPANY

STANDARD DRAIWNG FOR PIPING SUPPORT

STANDARD DRAWING FOR

STANDARD DRAWING LIST ST-A4-0000 (1 of 7)

STANDARD DRAWING LIST ST-A4-0000 (2 of 7)

STANDARD DRAWING LIST ST-A4-0000 (3 of 7)

ST-M-1156 DS-6 OIRECTIONAL STOP (FOR BARE PIPE) AO -

ST-A4-11SO GS-12 GUIOE (FOR BARE RISER PIPE) AO -

STANDARD DRAWING LIST ST-A4-0000 (4 of 7)

ST-A4-1266 RC-10 RESTING (FOR MULTI-PIPES ON CONCRETE WALL) AO -

STANDARD DRAWING LIST ST-A4-0000 (5 of 7)

ST-A4-1273 RF-3 RESTING (FOR MULTI-PIPE ON F/O) AO -

STANDARD DRAWING LIST ST-A4-0000 (6 of 7)

ST-M-1346 TR-1 RESTING (FOR RISER PIPE; TRUNNION TYPE) AO 824

STANDARD DRAWING LIST ST-A4-0000 (7 of 7)

5. WELDING SYMBOLS ARE IN ACCORDANCE WITH AWS(AMERICAN WELDING SOCIETY) A2.4-79.

MEMBER SIZE SIZE REMARKS

PIPING SUPPORT MATERIAL

WELDING TYPE CLAMP TYPE

WELDING TYPE SHOE CLAMP TYPE SHOE

350 400 450 500 550 600

2" - 4" 5" - 8" 10" - 18" 20" - 42"

Wmax, Pmax, Fmax PER SHOE HEIGHT (KG)

350 400 450 500 550 600

GENERAL NOTES FOR TRUNNION TYPE SUPPORT

BASE MAX. OPE. PIPE/TRUNNION MAX. CODE REINFORCED

- FRICTION FACTOR : 0.3

3. THE FOLLOWING CASES MAY INCREASE ALLOWABLE LOADS.

40S 1-1/2" 40S

40S 2" 40S

40S 2" 40S

40S 4" 40S

40S 4" 40S

40S 6" 40S

40S 8" 40S

9.52 8" 40S

9.52 10" 40S

9.52 10" 40S

20" 9.52 12" 40S

24" 9.52 12" 40S

26" 9.52 14" 9.52

28" 9.52 14" 9.52

30" 9.52 16" 9.52

32" 9.52 16" 9.52

34" 9.52 18" 9.52

36" 9.52 18" 9.52

NOTE : SEE GENERAL NOTES FOR APPLICATION OF THIS TABLE.

40 1-1 /2" STD

STD 8" STO

STO 8' STO

STD 10" STD

STD 10' STD

20' 20 12' STD

24" 20 12" STD

26" STD 14" STD

28" STD 14" STD

30" STD 16' STD

32" STO 16" STD

34' STD 18' STD

1 l:SEOw_ ' 12~