e_kb582_wg_cover.

fm Page 1 Thursday, December 10, 2020 2:05 PM

RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
(http://www.ricoh-imaging.co.jp)
RICOH IMAGING EUROPE Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102, SLR Digital Camera
S.A.S. 94513 Rungis Cedex, FRANCE
(http://www.ricoh-imaging.eu)
RICOH IMAGING AMERICAS 2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.
CORPORATION (http://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA 5560 Explorer Drive Suite 100, Mississauga, Ontario, L4W 5M3, CANADA Wireless Communication Guide
INC. (http://www.ricoh-imaging.ca)
RICOH IMAGING CHINA CO., Room A 23F Lansheng Building, 2-8 Huaihaizhong Road, Huangpu District,
LTD. Shanghai, 200021, CHINA
(http://www.ricoh-imaging.com.cn)

http://www.ricoh-imaging.co.jp/english

This contact information may change without notice.

Please check the latest information on our websites.

• Specifications and external dimensions are subject to *4RE2Z030* To ensure the best performance from your
change without notice. camera, please read the Wireless
51563 Copyright © RICOH IMAGING COMPANY, LTD. 2020
Communication Guide before using the
Model No. R03010
R01DTL20 Printed in Philippines camera.
e_kb582_wg_cover.fm Page 2 Thursday, December 10, 2020 2:05 PM

For Customers in Thai

About the Wireless LAN and Bluetooth® Displaying the Certification Marks This telecommunication equipment conforms to the
Functions 1. Press F to display the menu screen. requirements of the Office of the National Broadcasting and
2. Use ABCD to display the D6 menu (Maintenance). Telecommunications Commission.
• Do not use the camera in a place where electrical products, 3. Use ABCD to select [Certification Marks], and press
AV/OA devices, and so on generate magnetic fields and E.
electromagnetic waves.
• If the camera is affected by magnetic fields and
electromagnetic waves, it may not be able to communicate. Trademarks
• If the camera is used near a TV or a radio, poor reception or
TV screen glitch may occur. • Microsoft and Windows are registered trademarks of
• If there are multiple wireless LAN access points or Bluetooth® Microsoft Corporation in the United States of America and
devices near the camera and the same channel is used, other countries.
search operation may not be executed correctly. • Mac and macOS are trademarks of Apple Inc., registered in
the U.S. and other countries.
In the frequency band used by the camera, along with • IOS is a trademark or registered trademark of Cisco in the
industrial, scientific, and medical devices such as U.S. and other countries and is used under license.
microwave ovens, premises radio stations (wireless • Intel and Intel Core are trademarks of Intel Corporation in the
stations requiring license) and specified low power radio U.S. and/or other countries.
stations (wireless stations not requiring license) for mobile • SDXC Logo is a trademark of SD-3C, LLC.
object identification used in factory production lines, etc., • The Bluetooth® word mark and logos are registered
and amateur radio stations (wireless stations requiring trademarks owned by Bluetooth SIG, Inc., and any use of
license) are operated. such marks by Ricoh Company, Ltd. is under license.
1. Before using the camera, confirm that premises radio • USB Type-C is a trademark of USB Implementers Forum.
stations and specified low power radio stations for • HDMI, the HDMI logo and High-Definition Multimedia
mobile object identification and amateur radio stations Interface are trademarks or registered trademarks of HDMI
are not operated in the vicinity. Licensing, LLC in the United States and/or other countries.
2. In the event that the camera causes harmful radio wave
interference to premises radio stations for mobile object All other trademarks are the property of their respective owners.
identification, immediately change the frequency being
• This product uses the RICOH RT font designed by Ricoh
used to avoid interference.
Company Ltd.
3. If you have other troubles such that the camera causes
harmful radio wave interference to specified low power
radio stations for mobile object identification or to
amateur radio stations, contact your nearest service
center.

This camera conforms to the technical standards under the

Radio Law and Telecommunications Business Law and the
certification of conformance to technical standards can be
displayed on the monitor.
 Connecting to a Communication
Using the Camera with a D4
Device via Bluetooth®
Communication Device
You can connect the camera to a communication device
1 Enable the Bluetooth®
function of the
wirelessly via Bluetooth® or wireless LAN. communication device.
By using the dedicated app “Image Sync”, the camera can be
operated from the communication device and the images saved 2 Select [Bluetooth Setting] in the D4 menu, and
in the memory cards can be displayed on the communication press D.
device to import them. The [Bluetooth Setting] screen appears.

t Memo
• You can easily connect the camera to a communication
3 Set [Action Mode] to [On].
device using “Image Sync” installed on the communication
device. Refer to “Operating the Camera with a
4 Select [Pairing], and press D.
Communication Device” (p.4) for details on “Image Sync”.
• The captured images can be transferred to the
5 Select [Execute Pairing], Pairing

and press E.
Execute Pairing
communication device by specifying them in [File Transfer] of Paired Devices

the C2 menu. The images can also be transferred Pairing starts.

automatically after shooting. (p.4) When transferring the [Device Name] of connectable
images, connect the camera to the communication device via the camera is displayed.
a wireless LAN.
• The Bluetooth® connection and the wireless LAN connection
can be switched using “Image Sync”.
6 In the list of available devices displayed on the
Bluetooth® setting screen of the communication
• For details on using the camera with the communication
device, refer to the manual of the device used and the “Image
device, enter the device name of the camera.
Sync” website. [Authentication Code] is displayed on the camera.

u Caution 7 Enter the displayed authentication code on the

• Do not attempt to use the Bluetooth® and wireless LAN communication device.
functions in a location where the use of wireless The connection status icon appears when the camera is
communication devices is restricted or prohibited, such as on connected to the communication device via Bluetooth®.
airplanes.
• When using the Bluetooth® or wireless LAN function, observe u Caution
local laws and regulations governing wireless • When the operating system of the communication device is
communications. iOS, use “Image Sync” to connect the camera to the
communication device. Refer to “Operating the Camera with
a Communication Device” (p.4) for details on “Image Sync”.

1
 t Memo
• Once the pairing is established, when [Action Mode] is set to Connecting to a Communication Device via
[On] in [Bluetooth Setting] of the D4 menu, you can connect a Wireless LAN
the camera to the communication device via Bluetooth® only
by turning on the communication device and camera. Enable the wireless LAN function using one of the following
• Select [Communication Info.] on the [Bluetooth Setting] methods.
screen displayed in Step 3 to display the device name of the • Setting from the menu or control panel
camera. • Turning the camera on while pressing 3
• Select [Paired Devices] in Step 5 to display the list of paired • Using the Fx button
communication devices. The pairing can be established with • Operating the communication device connected via
up to six communication devices. Press M on this screen to Bluetooth®
cancel the pairing.
• When the pairing cannot be established from the camera, When the wireless LAN function is
execute the pairing from the communication device. enabled, the 7 (white) icon 1/ 250 F 5.6

indicating the wireless LAN 1600

communication status is displayed on SR

the status screen and Live View

01/01/2021 9999
screen. When 8 (gray) is displayed, 10:10 9999

a connection with the communication

device is not established correctly.

t Memo
• Even after the wireless LAN function is enabled, it returns to
an inactive state when the camera is turned off and on again.
• Auto Power Off is not available while a wireless LAN
connection is established or images are being transferred. If
Auto Power Off is activated while a connection is not
established, the wireless LAN function is disabled. The
function is enabled when the camera recovers from Auto
Power Off.

u Caution
• The wireless LAN function is disabled while the camera is
connected to a computer with a USB cable (except when the
power is supplied with the AC adapter).
• The camera does not support communication using a
memory card with a built-in wireless LAN function (such as an
Eye-Fi card or Flucard).

2
 Setting from the Menu D4 Using the Fx Button E2

1 Select [Wireless LAN Setting] in the D4 menu, If you register the wireless LAN function to the customizable
function button (Fx button) in advance, you can enable and
and press D.
disable the function by a simple button operation.
The [Wireless LAN Setting] screen appears.

2 Set [Action Mode] to [On]. Wireless LAN Setting

1 Register [Wireless LAN Setting] to the desired
button following the procedures described in
Set [Action Mode] to [Off] to Action Mode

disable the wireless LAN

Communication Info.
the Operating Manual.
function.
2 Press the button with [Wireless LAN Setting]
registered.
The wireless LAN function is enabled or disabled.
3 Press F twice.
t Memo
• In Step 2, select [Communication Info.] to check [SSID],
[Password], and [MAC Address] of the wireless LAN. Or,
press M to reset the settings to their default values.

Turning the Camera on While Pressing the

Playback Button

The wireless LAN function can be enabled in the playback mode

from the power-off state of the camera.

1 With the camera turned off, turn the main switch

to [ON] while pressing 3.

2 Keep pressing 3 for about 2 seconds.

The camera is turned on in the playback mode and the
wireless LAN function is enabled.

3
 Operating the Camera with a Setting Functions Linked with the
D4
Communication Device Communication Device

The camera can be connected to a communication device via You can make the following settings in [Smartphone Link] of the
Bluetooth® or wireless LAN. D4 menu.
The following functions are available with the dedicated app Records the location information of the
“Image Sync”. Store Location
communication device in captured
Info.
Displays the Live View image of the images.
camera on the communication device, and Automatically sets the transfer reservation
Auto Image
Remote Capture enables controlling exposure settings and for captured images after shooting.
Transfer
shooting by operating the communication Select the format of transferred files.
device. Reduces the number of recorded pixels of
Auto Resize
Displays the images saved on the memory a JPEG image to r and transfers it.
card inserted in the camera on the Continues the image transfer even when
Image View Image Transfer
communication device and imports the the camera is turned off midway through
images to the communication device. while Off
the transfer.
Synchronizes the date and time displayed
Time
on the camera with the date and time
Synchronization
settings of the communication device.
“Image Sync” supports iOS and Android™, and can be
downloaded from the App Store or Google Play™. For the
supported operating system and other details, refer to the
download site.

t Memo
• For how to connect the camera to a communication device
and details on the “Image Sync”, refer to the following
website.
http://www.ricoh-imaging.co.jp/english/products/app/
image-sync2/
• When the camera is connected to the communication device
via Bluetooth®, the wireless LAN function is enabled or
disabled automatically depending on the situation.
• For details on how to operate the communication device,
refer to the manual of the device.

4
Model Description Included Accessories
R03010 Strap O-ST162, ME Viewfinder Cap, Rechargeable
Model/Type
TTL autofocus, auto-exposure SLR digital camera Lithium-ion Battery D-LI90, USB power adapter,
PENTAX KAF2 bayonet mount (AF coupler, lens Package Power plug, USB cable I-USB166
Lens Mount Contents <Mounted to the camera> Eyecup FU, Hot shoe
information contacts, K-mount with power contacts)
cover FK, Sync socket 2P cap, Body mount cap K II,
Compatible KAF4, KAF3, KAF2 (power zoom compatible), KAF, Battery grip terminal cover
Lenses KA mount lenses
Software Digital Camera Utility 5
Wireless LAN
Standards IEEE 802.11b/g/n (standard wireless LAN protocol)
Frequency
(Center 2412 to 2462 MHz (channels: Ch 1 to Ch 11)
Frequency)
Authentication: WPA2
Security
Encryption: AES

Bluetooth®
Standards Bluetooth® v4.2 (Bluetooth Low Energy)
Frequency
(Center 2402 to 2480 MHz (channels: Ch 0 to Ch 39)
Frequency)

Power Supply
Battery Type Rechargeable Lithium-ion Battery D-LI90
AC Adapter AC Adapter Kit K-AC166 (optional)

Interfaces
USB terminal (USB Type-C), Cable release terminal
Connection Port (2.5 mm dia.), X-sync socket, HDMI® terminal (type
D), Microphone terminal, Headphone terminal
USB 3.2 Gen 1
Data transfer: MTP, CD-ROM
USB Connection
Battery recharge, Power supply to the camera (when
the dedicated AC adapter is used)

Dimensions and Weight

Approx. 134.5 mm (W) × 103.5 mm (H) × 73.5 mm (D)
Dimensions
(excluding protrusions)
Approx. 820 g (including the dedicated battery and
Weight an SD Memory Card)
Approx. 735 g (body only)

Operating Environment
Temperature -10 to 40°C (14 to 104°F)
Humidity 85% or less (no condensation)
5
 For Customers in USA some biological effects might occur, but such findings have not
STATEMENT OF FCC COMPLIANCE been confirmed by additional research. R03010 has been
This device complies with Part 15 of the FCC Rules. Operation tested and found to comply with FCC radiation exposure limits
is subject to the following two conditions: (1) This device may set forth for an uncontrolled environment and meets the FCC
not cause harmful interference, and (2) this device must accept radio frequency (RF) Exposure Guidelines.
any interference received, including interference that may
cause undesired operation.
FCC CAUTION:
Declaration of Conformity
Changes or modifications not approved by the party responsible According to 47CFR, Parts 2 and 15 for
for compliance could void the user’s authority to operate the Class B Personal Computers and Peripherals
equipment.
This equipment has been tested and found to comply with the We: RICOH IMAGING AMERICAS
limits for a Class B digital device, pursuant to part 15 of the FCC
CORPORATION
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential Located at: 2 Gatehall Drive Suite 204,
installation. This equipment generates, uses and can radiate Parsippany, New Jersey 07054,
radio frequency energy and, if not installed and used in U.S.A.
accordance with the instructions, may cause harmful
Phone: 800-877-0155
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to Declare under sole responsibility that the product identified
herein complies with 47CFR Parts 2 and 15 of the FCC rules as
radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try a Class B digital device. Each product marketed is identical to
the representative unit tested and found to be compliant with the
to correct the interference by one or more of the following
standards. Records maintained continue to reflect the
measures:
• Reorient or relocate the receiving antenna. equipment being produced can be expected to be within the
variation accepted, due to quantity production and testing on the
• Increase the separation between the equipment and
statistical basis as required by 47CFR §2.909. Operation is
receiver.
• Connect the equipment into an outlet on a circuit different subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) This device must accept
from that to which the receiver is connected.
any interference received, including interference that may
• Consult the dealer or an experienced radio/TV technician for
help. cause undesired operation. The above named party is
responsible for ensuring that the equipment complies with the
The available scientific evidence does not show that any health standards of 47CFR §15.101 to §15.109.
problems are associated with using low power wireless devices.
There is no proof, however, that these low power wireless Product Name: Digital Camera
devices are absolutely safe. Low power Wireless devices emit
low levels of radio frequency energy (RF) in the microwave Model Number: R03010
range while being used. Whereas high levels of RF can produce Contact Person: Customer Service Manager
health effects (by heating tissue), exposure of low-level RF that
does not produce heating effects causes no known adverse Date and Place: September, 2020 Parsippany
health effects. Many studies of low-level RF exposures have not
found any biological effects. Some studies have suggested that
6
For Customers in Canada Pour les utilisateurs au Canada
Innovation, Science and Economic Development Canada Avis de conformité à la réglementation d’Innovation,
(ISED) Regulatory Compliance Notice Sciences et Développement économique Canada (ISDE)
This Class B digital apparatus complies with Canadian ICES- Cet appareil numérique de la classe B est conforme à la norme
003 (B). NMB-003 (B) du Canada.

This device contains licence-exempt transmitter(s)/receiver(s) L’émetteur/récepteur exempt de licence contenu dans le
that comply with Innovation, Science and Economic présent appareil est conforme aux CNR d’Innovation, Sciences
Development Canada’s licence-exempt RSS(s). Operation is et Développement économique Canada applicables aux
subject to the following two conditions: appareils radio exempts de licence. L’exploitation est autorisée
1. This device may not cause interference. aux deux conditions suivantes :
2. This device must accept any interference, including 1. L’appareil ne doit pas produire de brouillage ;
interference that may cause undesired operation of the 2. L’appareil doit accepter tout brouillage radioélectrique subi,
device. même si le brouillage est susceptible d’en compromettre le
fonctionnement.
The available scientific evidence does not show that any health
problems are associated with using low power wireless devices. Les connaissances scientifiques dont nous disposons n’ont mis
There is no proof, however, that these low power wireless en évidence aucun problème de santé associé à l’usage des
devices are absolutely safe. Low power wireless devices emit appareils sans fil à faible puissance. Nous ne sommes
low levels of radio frequency energy (RF) in the microwave cependant pas en mesure de prouver que ces appareils sans fil
range while being used. Whereas high levels of RF can produce à faible puissance sont entièrement sans danger. Les appareils
health effects (by heating tissue), exposure of low-level RF that sans fil à faible puissance émettent une énergie fréquence
does not produce heating effects causes no known adverse radioélectrique (RF) très faible dans le spectre des micro-ondes
health effects. Many studies of low-level RF exposures have not lorsqu’ils sont utilisés. Alors qu’une dose élevée de RF peut
found any biological effects. Some studies have suggested that avoir des effets sur la santé (en chauffant les tissus),
some biological effects might occur, but such findings have not l’exposition à de faibles RF qui ne produisent pas de chaleur n’a
been confirmed by additional research. The R03010 has been pas de mauvais effets connus sur la santé. De nombreuses
tested and found to comply with ISED radiation exposure limits études ont été menées sur les expositions aux RF faibles et
set forth for an uncontrolled environment and meets RSS-102 n’ont découvert aucun effet biologique. Certaines études ont
of the ISED radio frequency (RF) Exposure rules. suggéré qu’il pouvait y avoir certains effets biologiques, mais
ces résultats n’ont pas été confirmés par des recherches
supplémentaires. Le R03010 a été testé et jugé conforme aux
limites d’exposition aux rayonnements ISDE énoncées pour un
environnement non contrôlé et respecte les règles d’exposition
aux fréquences radioélectriques (RF) CNR-102 de l’ISDE.

7
 For Customers in Europe 2. In other countries outside the EU
Information for Users on Collection and Disposal of Old
These symbols are only valid in the European Union. If you wish
Equipment and Used Batteries
to discard used products, please contact your local authorities
1. In the European Union or dealer and ask for the correct method of disposal.
These symbols on the products, packaging and/ For Switzerland: Used electrical/electronic equipment can be
or accompanying documents mean that used returned free of charge to the dealer, even when you don’t
electrical and electronic equipment and batteries purchase a new product. Further collection facilities are listed
should not be mixed with general household on the home page of www.swico.ch or www.sens.ch.
waste.
CAUTION:
Used electrical/electronic equipment and RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
batteries must be treated separately and in INCORRECT TYPE. DISPOSE OF USED BATTERIES
accordance with legislation that requires proper ACCORDING TO THE INSTRUCTIONS.
treatment, recovery and recycling of these
products. Notice to Users in EEA Countries
This product complies with the essential requirements and
By disposing of these products correctly you will
provisions of RE Directive 2014/53/EU.
help ensure that the waste undergoes the
The CE Declaration of Conformity is available by accessing the
necessary treatment, recovery and recycling
URL:
and thus prevent potential negative effects on
http://www.ricoh-imaging.co.jp/english/support/
the environment and human health which could
declaration_of_conformity.html
otherwise arise due to inappropriate waste
and selecting the product applicable.
handling.

If a chemical symbol is added beneath the symbol shown Operating frequency band: 2400 MHz - 2483.5 MHz
above, in accordance with the Battery Directive, this indicates Maximum radio-frequency power: 14 dBm EIRP
that a heavy metal (Hg = Mercury, Cd = Cadmium, Pb = Lead)
is present in the battery at a concentration above an applicable European importer: RICOH IMAGING EUROPE S.A.S.
threshold specified in the Battery Directive. Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102,
94513 Rungis Cedex, FRANCE
For more information about collection and recycling of used
products, please contact your local authorities, your waste Manufacturer: RICOH IMAGING COMPANY, LTD.
disposal service or the point of sale where you purchased the 1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
products.

The CE Mark is a Directive conformity mark of the

European Union.
8
e_kb582_wg_cover.fm Page 2 Thursday, December 10, 2020 2:05 PM

For Customers in Thai

About the Wireless LAN and Bluetooth® Displaying the Certification Marks This telecommunication equipment conforms to the
Functions 1. Press F to display the menu screen. requirements of the Office of the National Broadcasting and
2. Use ABCD to display the D6 menu (Maintenance). Telecommunications Commission.
• Do not use the camera in a place where electrical products, 3. Use ABCD to select [Certification Marks], and press
AV/OA devices, and so on generate magnetic fields and E.
electromagnetic waves.
• If the camera is affected by magnetic fields and
electromagnetic waves, it may not be able to communicate. Trademarks
• If the camera is used near a TV or a radio, poor reception or
TV screen glitch may occur. • Microsoft and Windows are registered trademarks of
• If there are multiple wireless LAN access points or Bluetooth® Microsoft Corporation in the United States of America and
devices near the camera and the same channel is used, other countries.
search operation may not be executed correctly. • Mac and macOS are trademarks of Apple Inc., registered in
the U.S. and other countries.
In the frequency band used by the camera, along with • IOS is a trademark or registered trademark of Cisco in the
industrial, scientific, and medical devices such as U.S. and other countries and is used under license.
microwave ovens, premises radio stations (wireless • Intel and Intel Core are trademarks of Intel Corporation in the
stations requiring license) and specified low power radio U.S. and/or other countries.
stations (wireless stations not requiring license) for mobile • SDXC Logo is a trademark of SD-3C, LLC.
object identification used in factory production lines, etc., • The Bluetooth® word mark and logos are registered
and amateur radio stations (wireless stations requiring trademarks owned by Bluetooth SIG, Inc., and any use of
license) are operated. such marks by Ricoh Company, Ltd. is under license.
1. Before using the camera, confirm that premises radio • USB Type-C is a trademark of USB Implementers Forum.
stations and specified low power radio stations for • HDMI, the HDMI logo and High-Definition Multimedia
mobile object identification and amateur radio stations Interface are trademarks or registered trademarks of HDMI
are not operated in the vicinity. Licensing, LLC in the United States and/or other countries.
2. In the event that the camera causes harmful radio wave
interference to premises radio stations for mobile object All other trademarks are the property of their respective owners.
identification, immediately change the frequency being
• This product uses the RICOH RT font designed by Ricoh
used to avoid interference.
Company Ltd.
3. If you have other troubles such that the camera causes
harmful radio wave interference to specified low power
radio stations for mobile object identification or to
amateur radio stations, contact your nearest service
center.

This camera conforms to the technical standards under the

Radio Law and Telecommunications Business Law and the
certification of conformance to technical standards can be
displayed on the monitor.
e_kb582_wg_cover.fm Page 1 Thursday, December 10, 2020 2:05 PM

RICOH IMAGING COMPANY, LTD.

1-3-6, Nakamagome, Ohta-ku, Tokyo 143-8555, JAPAN
(http://www.ricoh-imaging.co.jp)
RICOH IMAGING EUROPE Parc Tertiaire SILIC 7-9, avenue Robert Schuman - B.P. 70102, SLR Digital Camera
S.A.S. 94513 Rungis Cedex, FRANCE
(http://www.ricoh-imaging.eu)
RICOH IMAGING AMERICAS 2 Gatehall Drive Suite 204, Parsippany, New Jersey 07054, U.S.A.
CORPORATION (http://www.us.ricoh-imaging.com)
RICOH IMAGING CANADA 5560 Explorer Drive Suite 100, Mississauga, Ontario, L4W 5M3, CANADA Wireless Communication Guide
INC. (http://www.ricoh-imaging.ca)
RICOH IMAGING CHINA CO., Room A 23F Lansheng Building, 2-8 Huaihaizhong Road, Huangpu District,
LTD. Shanghai, 200021, CHINA
(http://www.ricoh-imaging.com.cn)

http://www.ricoh-imaging.co.jp/english

This contact information may change without notice.

Please check the latest information on our websites.

• Specifications and external dimensions are subject to *4RE2Z030* To ensure the best performance from your
change without notice. camera, please read the Wireless
51563 Copyright © RICOH IMAGING COMPANY, LTD. 2020
Communication Guide before using the
Model No. R03010
R01DTL20 Printed in Philippines camera.