Scribd
Upload
297 views3 pages

Load Calculation

This document provides instructions and requirements for analyzing, designing, and detailing a roof truss for a proposed four-story condominium building located in Baguio City, Philippines. It includes: - Calculations of dead loads, live loads, and wind loads on the roof, with wind load calculated according to NSCP-2015 standards. - Requirements to analyze the truss using STAAD software, calculate member forces considering load combinations, and design and detail the truss members. - Requirements to submit a detailed project report in PDF format including calculations, drawings, software output files, and other supporting documents.

Uploaded by

ilagod2327
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
297 views3 pages

Load Calculation

This document provides instructions and requirements for analyzing, designing, and detailing a roof truss for a proposed four-story condominium building located in Baguio City, Philippines. It includes: - Calculations of dead loads, live loads, and wind loads on the roof, with wind load calculated according to NSCP-2015 standards. - Requirements to analyze the truss using STAAD software, calculate member forces considering load combinations, and design and detail the truss members. - Requirements to submit a detailed project report in PDF format including calculations, drawings, software output files, and other supporting documents.

Uploaded by

ilagod2327
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SteelD -Steel Design

PLATE 100-A

Analysis and Design of Tension Members


Analysis and Design of Compression Members

Instruction: Analyze, design and detail the given roof truss framing.

Given:
▪ Proposed Four-Story condominium building located at Amistad, Camp 7, Baguio City
▪ Flat Terrain
▪ Use weld connection (use U=1.0)
▪ If double angle is used, assume 5 mm gusset plate in between angles.
▪ Use A36 steel.

Required:
▪ Wind Load Calculation (see appendices)
▪ Truss Analysis (STAAD software)
▪ Member Forces-Load Combination (use Microsoft Excel)
▪ Design Calculation
▪ Detailing of Roof Truss
▪ Present detailed and itemized PROJECT REPORT in pdf file (scanned and/or handwritten calculations)

▪ Submit all supporting documents and files to CANVAS-excel, dwg file, staad file.

APPENDICES
JOB INFORMATION
PROJECT TRUSS ANALYSIS ENGR. RUP JOB NO. 1
SUBJECT WIND LOAD CALCULATION DATE SHEET 1
NO.
DESIGN PARAMETERS
I. DEAD LOADS
Roofing Weights = 0.15 KPa
Sag Rod = 0.05 KPa
Purlins = 0.10 KPa
Utilities:
Electrical = 0.05 KPa
Ceiling = 0.10 KPa
Ceiling Framing (Metal Fuming) = 0.15 KPa
II. LIVE LOAD
Roof Live = 0.70 KPa
III. WIND LOAD
Occupancy Category: III-Special Occupancy Structures
Site Location: #2257 Smith Drive, Asin Road, Baguio City
Wind Velocity = 250.00 Kph 69.44 m/s
Exposure =B
Tributary Width (w ) = 3.50 m
Roof Angle = 22.0 °
Kzt = 1 FLAT TERRAIN
Mean Height (z) = 13.5m
ANALYTICAL PROCEDURE (NSCP-2015)
qz=0.613KzKztKdV2 N/m2
z= 13.25 zg= 365.76 α= 7
Kz = 2.01(z/zg)2/α
Kz = 0.78
Kzt = 1 Flat Terrain
Kd = 0.85 Main Wind Force Resisting System

qz = 1.96 Kpa

P=qh[(GCpf)-(Gcpi)]
Winward Leeward
Case I Gcpi = 0.18 0.18 Enclosed Buildings
Case II Gcpi = -0.18 -0.18 Enclosed Buildings
Gcpi = -0.69 -0.37 Roof Angle 0°

Load Case I Pww = -1.705 KPa Plw = -0.9996 KPa


Load Case II Pww = -1.294 KPa Pww = -0.588 KPa

Summary of DESIGN LOADS


DEAD LOADS
Top Chord = 0.9735 kN/m
Bottom Chord = 1.05 kN/m
LIVE LOAD
Roof Live = 2.45 kN/m
WIND LOAD
Winward = -5.74 kN/m SUCTION
Leeward = -4.34 kN/m SUCTION
TRUSS DIAGRAM

You might also like