Answer MCQ S

Download as docx, pdf, or txt
Download as docx, pdf, or txt
You are on page 1of 2

1.

TEM utilizes electrons of shorter wavelength then SEM and the depth of
focus in TEM is ---------------the SEM
( a) higher b) lower c) not laser d)limited
2. The whole column of electron microscope should be evacuate to a pressure of
better the 10-10 Pa because electron would ------------penetrates in atmosphere

a) Easily b) scarcely c) rapidly d) slowly


3) --------------- is the most expensive spectroscopy technique.

a) FAA b) ICP-AES C)GFAA d) MIP

4) .------------- is the only spectroscopy technique requires RF magnetic field.

a) FAA b) ICP-AES C) GFAA d) MIP

5). Nebuliser convert liquid into ___________.

a) aerosol b) droplets c) solid particles

6) _________ can be used to check multi elements in the solid sample.

a) ICP-AES b) AAS c) IC d) GC
7) .__________ is commonly used in foundries.
a) ICP-AES b)AAS c) ic d) GC

8) .Pixel is the _______- pieces of information of a picture

a) Smallest b) largest c) 1/4


9. The lowest energy electron usually in the __________ and difficult to
detach by small amount of energy
a) Inner most b)m and n c) outer most
10). The highest energy electron usually in the _____________and difficult to
detach by small amount of energy
a) Inner most b)m and n c) outer most

11. The resolution of SEM __________with decreases electron beam probe size.
a) increases b) decreases c) inner most d) outer most

12. Tungsten is widely used as filament material because of ___________


a) higher mp b) lower mp c)higher brightness

13.LaB6 filament gives more brightness than W – filament.


a) True b) false c )not necessary
14 In field emission gun an extremely high _________field is used to get
electron for the filament material.
a) Electric b) magnetic
15. ________elements can be determined by atomic absorption spectroscopy
a)multiple b) single

16 )_______________- property utilized in ramna spectroscopy techniques


a) LIGHT scattering B) light emission c) light transmission

17) The surfaces of non metallic samples can be studied by __________


a) STM B) AFM C) STEM D) SPM

18 melting of an alloy can be determined by _______-

a) dilometer b) dsc c)electrical resistivity d) none of these

19 formation of austenite can not be determined by _______

a) TMA b) DSC c) TGA

20 curie temperature of carbon steel can be determined by _______ with little


modifications

a) TGA b) DSC c) dilatometer d) TMA

You might also like