www.vuassassins.

com

FINALTERM EXAMINATION
Spring 2010
CS610- Computer Network
Ref No: 1578657
Time: 90 min
Marks: 60
Question No: 1 ( Marks: 1 ) - Please choose one
A ---------- relies on the hardware manufacturer to assign a unique physical address to
each network interface.
► Static addressing scheme
► Configurable addressing scheme
► Dynamic addressing scheme
► None of the given
Question No: 2 ( Marks: 1 ) - Please choose one
An interface for thin Ethernet must have an ____________ connector , and must
generate signals according to the_____________ specification.
► RJ-45, 10 Base T
► RJ-45, 10 Base 5
► BNC, 10 Base 2
► BNC, 10 Base T
Question No: 3 ( Marks: 1 ) - Please choose one
A system with redundant bridges might have a problem with_______ in the system.
► Loop
► Filters
► Spanning Trees
► All given choices
Question No: 4 ( Marks: 1 ) - Please choose one
A Bridge can ________
► Filter a frame
► Forward a frame
► Extend a LAN
► Do all the above
Question No: 5 ( Marks: 1 ) - Please choose one
________ is used for typical data applications (where the data rate may be unknown and
bursty) and allows use of whatever bandwidth is available at a given time.
► Constant Bit Rate (CBR) service
► Variable Bit Rate (VBR) service
► Available Bit Rate (ABR) service
► None of the given
Question No: 6 ( Marks: 1 ) - Please choose one
ATM assigns each VC a _____________ identifier that is divided two parts to produce a
hierarchy.
► 21-bit
► 22-bit
► 23-bit
► 24-bit
 www.vuassassins.com

Question No: 7 ( Marks: 1 ) - Please choose one

________ of TCP/IP layering model, corresponds to basic network hardware.
► Physical Layer
► Network Interface Layer
► Internet Layer
► Transport Layer
Question No: 8 ( Marks: 1 ) - Please choose one
__________ places the boundary between the second and third octets
► Class A
► Class B
► Class C
► Class D
Question No: 9 ( Marks: 1 ) - Please choose one

UDP and TCP are both_________ layer protocols

► Physical
► Data link
► Network
► Transport
Question No: 10 ( Marks: 1 ) - Please choose one
Connection-oriented service, Point-to-point, Complete reliability, Full-duplex
communication, Stream interface, Reliable connection startup and Graceful connection
shutdown are the services provided by__________
► IP
► None of the given
► TCP
► UDP
Question No: 11 ( Marks: 1 ) - Please choose one
_______ protocols of TCP/IP layering model specify how to ensure reliable transfer.
► Physical Layer
► Network Interface Layer
► Internet Layer
► Transport Layer
Question No: 12 ( Marks: 1 ) - Please choose one
________identifies which application program on receiving computer should receive the
data
► Logical address
Source port
Logical address
None of the give

► Source port
► Destination Port
► None of the given
Question No: 13 ( Marks: 1 ) - Please choose one
________ identifies the application program that sent the data.
 www.vuassassins.com

► Destination Port
► Source port
► Logical address
► None of the given
Question No: 14 ( Marks: 1 ) - Please choose one
Which of the following are interior routing protocols?
► RIP
► OSPF
► BGP
► RIP and OSPF
Question No: 15 ( Marks: 1 ) - Please choose one
The Border Gateway Protocol (BGP) uses_________ for all communication
► UDP
► TCP
► Both UDP and TCP
► None of the given
Question No: 16 ( Marks: 1 ) - Please choose one
__________measures distance in network hops, where each network between the source
and destination counts as single hop.
► BGP
► OSPF
► RIP
► None of the given
Question No: 17 ( Marks: 1 ) - Please choose one
OSPF is based on--------
► Distance vector routing
► Link state routing
► Path vector routing
► Distance vector routing and Link state routing
Question No: 18 ( Marks: 1 ) - Please choose one
_________ performs local multicast and uses IP-in-IP encapsulation to send multicast
datagrams from one site on the Internet to another.
► Distance Vector Multicast Routing Protocol (DVMRP)
► Core Based Trees (CBT)
► Protocol Independent Multicast_ Sparse Mode (PIM-SM)
► Protocol Independent Multicast _ Dense Mode (PIM-DM)
Question No: 19 ( Marks: 1 ) - Please choose one
The length of time required to send a variable length packet is variable and does not
require a complicated interrupt scheme to detect completion of transmission.
► True
► False
Question No: 20 ( Marks: 1 ) - Please choose one
NEXT HEADER field in the base header defines type of header and it appears at end of
fixed-size base header.
► True
► False
 www.vuassassins.com

Question No: 21 ( Marks: 1 ) - Please choose one

Although message exchange can be used to bind addresses, sending a request for each
binding is hopelessly inefficient.
► True
► False
Question No: 22 ( Marks: 1 ) - Please choose one
Address mask defines how many bits of address are in suffix?
► True
► False
Question No: 23 ( Marks: 1 ) - Please choose one
A computer attached to a given network can only communicate with other computers
attached to the same network. Is this a problem with multiple networks?
► True
► False
Question No: 24 ( Marks: 1 ) - Please choose one
In the 1970s large organizations began to acquire multiple
networks. Each network in the organization formed island.
Employees needed to choose a computer appropriate for each
task. So they needed multiple screens, keyboards and
computers.
► False
► True
Question No: 25 ( Marks: 1 ) - Please choose one
The term self-identifying is used for Classful IP addresses because the class of the
address can be computed from the address__________.
► itself
► prefix
► suffix
► mask
Question No: 26 ( Marks: 1 ) - Please choose one
In which method of Address Resolution Protocol the protocol address independent of
hardware address?

Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data
Exchange?

► T, C
►D
►C
► T, D
Question No: 27 ( Marks: 1 ) - Please choose one
In which method of Address Resolution Protocol the protocol address is determined by
hardware address?

Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data
Exchange?
 www.vuassassins.com

►T
►D
►C
► T, C
Question No: 28 ( Marks: 1 ) - Please choose one
Reconstruction of original datagram is called reassembly.
► True
► False
Question No: 29 ( Marks: 1 ) - Please choose one
A computer needs a complete stack of protocols to run either a client or a server.
► True
► False
Question No: 30 ( Marks: 1 ) - Please choose one
TCP uses _______ mechanism to control the flow of data.
► door
► window
► acknowledgment
► retransmission
Question No: 31 ( Marks: 2 )
To solve the problem the routers and networks in the Internet are divided into groups.
How large do you think are these groups?

Question No: 32 ( Marks: 2 )

Traceroute continues to increment the Time To Live until the value is large enough for
the datagram to reach its final destination. What happens when the TTL is sufficiently
large for the datagram to reach its destination?

Question No: 33 ( Marks: 2 )

How can TCP monitor internet delays?

Question No: 34 ( Marks: 2 )

Which wireless standard is used in WIFI technology?

Question No: 35 ( Marks: 3 )

How does IP software reassemble fragments that arrive out of order?
 www.vuassassins.com

Question No: 36 ( Marks: 3 )

What kind of information is in a routing table?

Question No: 37 ( Marks: 3 )

Define frames without type field?

Question No: 38 ( Marks: 3 )

What is the meaning of Facilities For Transit Routing as a characteristic of the Border
Gateway Protocol?

Question No: 39 ( Marks: 5 )

What are the charachteristics of the Border Gateway Protocol?

Question No: 40 ( Marks: 5 )

Describe how NAT can be usefull for residence with cable modem or DSL?

FINALTERM EXAMINATION
Spring 2010
CS610- Data Communication
Question No: 1 ( Marks: 1 ) - Please choose one
__________representation of links that connect nodes is called as physical topology.
► geometrical
► logical
► physical
Question No: 2 ( Marks: 1 ) - Please choose one
The internet model consists of _________ layers.
► three
► two
► five
► seven
 www.vuassassins.com

Question No: 3 ( Marks: 1 ) - Please choose one

Encryption and encoding are the same terms.
True
► False
Question No: 4 ( Marks: 1 ) - Please choose one
he amplitude of a digital signal depends upon the________ to represent a bit.
► phase
► voltage
► wavelength
Question No: 5 ( Marks: 1 ) - Please choose one
The inversion of the level at 1 bit is called as __________
►NRZ-L
► NRZ-I
► RZ
Question No: 6 ( Marks: 1 ) - Please choose one
Modulation of an analog signal can be accomplished through changing the ___________
of the carrier signal.
► amplitude
► frequency
► phase
► all of the given
Question No: 7 ( Marks: 1 ) - Please choose one
If FCC regulations are followed, the carrier frequencies of adjacent AM radio stations are
____________ apart.
► 5 KHz
► 10 KHz
► 200 KHz
► 530 KHz
Question No: 8 ( Marks: 1 ) - Please choose one
Category 5 UTP cable is used for data transmission of upto__________.
► 100 Mbps
► 200 Mbps
► 250 Mbps
► 400 Mbps
Question No: 9 ( Marks: 1 ) - Please choose one
The RG number gives us information about ________.
► Twisted pairs
► Coaxial cables
► Optical fibers
► all of the given
Question No: 10 ( Marks: 1 ) - Please choose one
The inner core of an optical fiber is __________ in composition.
► Glass plastic
► Copper
► Bimetallic
► Liquid
 www.vuassassins.com

Question No: 11 ( Marks: 1 ) - Please choose one

All of popular Fiber optic connectors are ___________ shaped.
► Conical
► Barrel
► Circular
► Rectangular
Question No: 12 ( Marks: 1 ) - Please choose one
The VLF and LF bands use _________ propagation for communications.
► Ground
► Sky
► Line of sight
► Space
Question No: 13 ( Marks: 1 ) - Please choose one
Multiplexing is the set of techniques that allows simultaneous TX of multiple signals
across ___________ data link
► Single
► Multi
► Single and Multi
► none of the given
Question No: 14 ( Marks: 1 ) - Please choose one
A portion of the path that carries TX b/w a given pair of devices is known as __________.
► Node
► Bridge
► Channel
► Gateway
Question No: 15 ( Marks: 1 ) - Please choose one
Which error detection method involves polynomials?
► Checksum
► Two-dimensional parity check
► CRC
► Simple parity check
Question No: 16 ( Marks: 1 ) - Please choose one
If the ASCII character G is sent and the character D is received, what type of error is this?
► Single-bit
► Multiple-bit
► Burst
► Recoverable
Question No: 17 ( Marks: 1 ) - Please choose one
Which error detection method involves the use of parity bits?
► Simple parity check & two dimensional parity check
► CRC
► Two-dimensional parity check
► Simple parity check
Question No: 18 ( Marks: 1 ) - Please choose one
Which error detection method can detect a single-bit error?
► Simple parity check
 www.vuassassins.com

► Two-dimensional parity check

► CRC
► All of the given
Question No: 19 ( Marks: 1 ) - Please choose one
The Hamming code is a method of __________
► Error detection
► Error correction
► Error ecapsulation
► Error detection & Error encapsulation
Quetion No: 20 ( Marks: 1 ) - Please choose one
Sliding window requires that data frames be transmitted _______________
► Sequentially
► Frequently
► Synchronously
► Asynchronously
Question No: 21 ( Marks: 1 ) - Please choose one
In selective-reject ARQ, only the specific damaged or lost frame is_____________.
► Retransmitted
► Forwarded
► Selected
► Rejected
Question No: 22 ( Marks: 1 ) - Please choose one
Which of the following sublyer, resolves the contention for the shared media
► MAC
► LLC
►Physical
Question No: 23 ( Marks: 1 ) - Please choose one
The PDU has no flag fields, no CRC, and no station address
► TRUE
► FALSE
Question No: 24 ( Marks: 1 ) - Please choose one
IEEE divides the base band category into ______ standards.
►5
►4
►3
►6
Question No: 25 ( Marks: 1 ) - Please choose one
Like 10 Base 5, 10 Base 2 is a _________ topology LAN
► Ring
► Mesh
► Star
► Bus
Question No: 26 ( Marks: 1 ) - Please choose one
Check sum method is used for _______________ layers.
► Physical
► Application
 www.vuassassins.com

► Transport
► Datalink
Question No: 27 ( Marks: 1 ) - Please choose one
Repeater works on __________ layer.
► Data Link
► Physical
► Network
► Application
Question No: 28 ( Marks: 1 ) - Please choose one
Trunks are transmission media such as _________ that handle the telephone to the
nearest end office.
► Satellite links
► Twisted-pair & Fiber-optic
► Twisted-pair
► Fiber-optic
Question No: 29 ( Marks: 1 ) - Please choose one
Which of the following ___________ uses a series of filters to decompose multiplexed
signal into its constituent signals.
MUX
► DEMUX
► Switch
► Bridge
Question No: 30 ( Marks: 1 ) - Please choose one
In Fast Ethernet, data rate can be increased by _______________ collisions.
► Increasing
► Decreasing
► Keeping Constant
► None of the given
Question No: 31 ( Marks: 2 )
What are the advantages of a multipoint connection over a point-to-point connection?
Answer:
Point-to-point connection is limited to two devices, where else more than two devices
share a single link in multipoint connection. Multipoint connection can be used for
fail-over and reliability.
Question No: 32 ( Marks: 2 )
What's the name of the telephone service in which there is no need of dialing.
Answer:
\DSS (digital data service) is the telephone service in which there is no need of
dialing.
Question No: 33 ( Marks: 2 )
Which type of frames are present in BSC frames?
Answer:
There are two types of frames that are present in BSC.
1. Control Frames and
2. Data Frames
Question No: 34 ( Marks: 2 )
 www.vuassassins.com

What methods of line discipline are used for peer to peer and primary secondary
communication?
Answer:
Line discipline is done in two ways:
1. ENQ/ACK (Enquiry Acknowledgement)
This is used for peer to peer communication.
2. Poll/ Select
This method is used for primary secondary communication.
Question No: 35 ( Marks: 3 )
How does the checksum checker know that the received data unit is undamaged? [3]
Answer:
Checksum Checker or generator:
The sender subdivides data units into equal segments of ‘n’ bits(16 bits)
1. These segments are added together using one’s complement.
2. The total (sum) is then complemented and appended to the end of the original data unit
as redundancy bits called CHECKSUM.
3. The extended data unit is transmitted across the network.
4. The receiver subdivides data unit and adds all segments together and complement the
result.
5. If the intended data unit is intact, total value found by adding the data segments and the
checksum field should be zero.
6. If the result is not zero, the packet contains an error & the receiver rejects it.
Question No: 36 ( Marks: 3 )
Which one has more overhead, a repeater or a bridge? Explain your answer. [3]
Answer:
A bridge has more overhead than a repeater. A bridge processes the packet at two
layers ; a repeater processes a frame at only one layer. A bridge needs to search a
table and find the forwarding port as well as to regenerate the signal; a repeater
only regenerates the signal. In other words, a bridge is also a repeater (and more); a
repeater is not a bridge.
Question No: 37 ( Marks: 3 )
Write down disadvantages of Ring Topology.
Answer:
Disadvantages of Ring Topology
Unidirectional Traffic
A break in a ring that is a disabled station can disable the entire network
Can be solved by using:
Dual Ring or
A switch capable of closing off the Break
Question No: 38 ( Marks: 3 )
How parity bits are counted in VRC error detection method technique in case of
odd parity generator?
Answer:
For example:
We want to TX the binary data unit 1100001
Adding together the number of 1’s gives us 3, an odd number Before TX, we pass the
 www.vuassassins.com

data unit through a parity generator, which counts the 1’s and appends the parity bit (1) to
the end The total number of 1’s is now 4, an even number The system now transfers the
entire expanded across the network link When it reaches its destination, the RX puts all 8
bits through an even parity checking function
If the RX sees 11100001, it counts four ones, an even number and the data unit passes
When the parity checker counts the 1’s, it gets 5 an odd number The receiver knows that
an error has occurred somewhere and therefore rejects the whole unit Some systems may
also use ODD parity checking The principal is the same as even parity
Question No: 39 ( Marks: 5 )
How are lost acknowledgment and a lost frame handled at the sender site? [5]

Question No: 40 ( Marks: 5 )

Explain Protocol Data Unit (PDU)?
Answer: Protocol data unit (PDU) is an OSI term that refers generically to a group of
information added or removed by a particular layer of the OSI model. In specific terms,
an LxPDU implies the data and headers defined by layer x. Each layer uses the PDU to
communicate and exchange information. The PDU information is only read by the peer
layer on the receiving device and then stripped off, and data is handed over to the next
upper layer.
FINALTERM EXAMINATION
Fall 2008
CS610- Computer Network
Ref No: 325806
Time: 120 min
Marks: 70

Question No: 1 ( Marks: 1 ) - Please choose one

Computer networks are often called -------------- because they use packet technology.
► Ethernet
► Switch networks
► Packet networks
► None of the given
Question No: 2 ( Marks: 1 ) - Please choose one
A network uses a ------arranges for computers to be connected in a closed loop.
► Star Topology
► Ring Topology
► Bus Topology
► None of the given
In a ring topology each computer is connected to other thorough a ring
Question No: 3 ( Marks: 1 ) - Please choose one
An ------------method, the network hardware designers specify how type information is
included in the frame and the value use to identify various frame types.
► Explicit frame type
► Ideal frame type
► Implicit frame type
 www.vuassassins.com

► None of the given

EXPLICIT FRAME TYPE:
In this type the identifying value is included with frame describes types of
included data.
Question No: 4 ( Marks: 1 ) - Please choose one
An interface for thin Ethernet must have an ____________ connector , and must generate
signals according to the_____________ specification.
► RJ-45, 10 Base T (reference not available)
► RJ-45, 10 Base 5
► BNC, 10 Base 2
► BNC, 10 Base T
Question No: 5 ( Marks: 1 ) - Please choose one
A Bridge forwards or filters a frame by comparing the information in its address table to
the frame’s__________
► Layer 2 source address
► Source node’s physical address
► Layer 2 destination address (not confirm)
► Layer 3 destination address
Question No: 6 ( Marks: 1 ) - Please choose one
Most WAN systems include a mechanism that can be used to eliminate the common case
of duplication routing is called___________
► Hierarchal address
► Default route
► Shortest path
► None of the given
Most WAN systems include a mechanism that can be used to eliminate the common case
of duplication routing is called Default route. The mechanism allows a single entry in a
forwarding table to replace a long list of entries that have the same next hope value
Question No: 7 ( Marks: 1 ) - Please choose one
________ of TCP/IP layering model, corresponds to basic network hardware.
► Physical Layer
► Network Interface Layer
► Internet Layer
► Transport Layer
LAYER 1:
Corresponds to basic network hardware layer in OSI
Question No: 8 ( Marks: 1 ) - Please choose one
_______ protocols of TCP/IP layering model specify how to ensure reliable transfer.
► Physical Layer
► Network Interface Layer
► Internet Layer
► Transport Layer
The Internet layer in the TCP/IP reference model is responsible for transferring data
between the source and destination computers
Question No: 9 ( Marks: 1 ) - Please choose one
 www.vuassassins.com

________is called an end-to-end protocol because it provide a connection directly from

an application on one computer to an application on a remote computer.
► IP
► UDP
► TCP
► None of the given
UDP has the following characteristics.
It is an end-to-end protocol. It provides application-to-application communication.
Question No: 10 ( Marks: 1 ) - Please choose one
____________ uses distance vector approach to define routing
► BGP
► OSPF
► RIP
► None of the given
DISTANCE-VECTOR ROUTING:
• It is very simple to implement.
• Packet switch updates its own routing table first.
• It is used in RIP.
Question No: 11 ( Marks: 1 ) - Please choose one
_______ is ideal in a situation where the group is small and all members are attached to
contiguous Local Area Networks.
► Flood-and -Prune
► Configuration-and -Tunneling
► Core-Based Discovery
► None of the give006E
FLOOD-AND-PRUNE:
Flood-and-prune is ideal in a situation where the group is small and all members
Are attached to contiguous Local Area Networks.
Question No: 12 ( Marks: 1 ) - Please choose one
Router that decrements TTL to __ sends ICMP time exceeded message, with router’s
address as source address
►3
►2
►1
►0
Router that decrements TTL to 0 sends ICMP time exceeded message, with router’s
address as source address
Question No: 13 ( Marks: 1 ) - Please choose one
Protocol addresses are abstractions provided by ___________.
► hardware
► software
► operating system
► internet
PROTOCOL ADDRESSES AND PACKET DELIVERY:
Protocol addresses are abstractions provided by software
Question No: 14 ( Marks: 1 ) - Please choose one
 www.vuassassins.com

Although message exchange can be used to bind addresses, sending a request for each
binding is hopelessly inefficient.
► True
► False
CASHING ARP RESPONSES:
Although message exchange can be used to bind addresses, sending a request for
each binding is hopelessly inefficient
Question No: 15 ( Marks: 1 ) - Please choose one
ARP is almost always used to bind a ___-bit IP address to a ___-bit Ethernet address.
► 32, 48
► 24, 32
► 32, 64
► 32, 128
ARP is almost always used to bind a 32-bit IP address to a 48-bit Ethernet address
Question No: 16 ( Marks: 1 ) - Please choose one
In the 1970s large organizations began to acquire multiple networks. Each network in the
organization formed island. Employees needed to choose a computer appropriate for each
task. So they needed multiple screens, keyboards and computers.
► False
► True
In the 1970s large organizations began to acquire multiple networks. Each
network in the organization formed island. Employees needed to choose a
computer appropriate for each task. So they needed multiple screens, keyboards
and computers.
Question No: 17 ( Marks: 1 ) - Please choose one
In which method of Address Resolution Protocol the protocol address is determined by
hardware address?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data
Exchange?
►T Types of
►D Features Resolution
►C
► T, C Use full with any hardware T
Address change affects all hosts T
Protocol address is determined C
by hardware address

Question No: 18 ( Marks: 1 ) - Please choose one

The general form of an IP datagram is with a header followed by data. The header
contains information that controls where and how the datagram is to be sent.
► True
► False
 Header contains all information needed to deliver datagram to the destination
computer. It contains:
 www.vuassassins.com

• Destination address
• Source address
• Identifier
• Other delivery information
Question No: 19 ( Marks: 1 ) - Please choose one
To save traffic, an EGP does not summerize routing information from the autonomous
system before passing it to another autonomous system.
► True
► False
"It provides routing among autonomous systems (EGP).
Question No: 20 ( Marks: 1 ) - Please choose one
Which of the following is a correct representation of the IPv6?
► 105.220.136.100.255.255.255.255.0.0.18.128.140.10.255.255
► 105.220.136.100.255.255.255.256.0.0.18.128.140.10.255.255
► 105.220.136.100.255.255.255.255.0.0.18.128.140.10.255.255.256
► 105.220.136.100.255.255.255.255.0.0.18.128.140.10.255
128-bit addresses unwidely in dotted decimal; requires 16 numbers:
105.220.136.100.255.255.255.255.0.0.18.128.140.10.255.255
Question No: 21 ( Marks: 2 )
Is there a comparison between TCP/IP reference model and OSI reference model.
Both the TCP/IP and OSI are international standards for data communication. Both use
the concept of protocol layering. These are theconceptual tools that is often used to show
how various protocols and technologies fit together to implement networks. The
functions that the model represents are much the same. This means that the TCP/IP and
the OSI models are really quite similar in nature even if they don't carve up the network
functionality pie in precisely the same way. There is a fairly natural correspondence
between the TCP/IP and OSI layers; it just isn't always a “one-to-one” relationship. Since
the OSI model is used so widely, it is common to explain the TCP/IP architecture both in
terms of the TCP/IP layers and the corresponding OSI layers
Question No: 22 ( Marks: 2 )
How can a datagram be transmitted across a physical network that does
not understand the datagram format?
Encapsulate!
 The network interface layer encapsulates an entire datagram in the data area of a
hardware frame.
 The network hardware ignores the datagram format.
 The hardware treats a frame containing a datagram like any other frame.
 The sender places a frame type in the frame header indicating that the frame
contains a datagram.
 The receiver reads the frame type and knows the frame contains a datagram.
Question No: 23 ( Marks: 2 )
What is the basic concept of Twice NAT (Network Address Translation)?
Twice NAT is another variant of NAT. it is used with site that runs server. In this process
NAT box is connected to Domain Name.
Question No: 24 ( Marks: 3 )
What format is used for an internet packet?
 www.vuassassins.com

Question No: 25 ( Marks: 3 )

“To achieve a hierarchy, OSPF allows an autonomous system to be partitioned for
routing purposes”. Does this feature make OSPF more complex or powerful?
Question No: 26 ( Marks: 3 )
Why does IPv6 use separate Extension Headers?
IPv6 use separate Extension Headers. Fragmentation information is kept in separate
extension header. Each fragment has base header and (inserted) fragmentation header.
Entire datagram including originalheader may be fragmented.
Question No: 27 ( Marks: 5 )
Consider the IP addresses: 178.200.127.5 and the corresponding subnet masks
255.255.255.0, then find out the following:
a. The number of bits used for subnetting (Answer 8 bits)
b. Total number of host in the subnet (Answer 254 )
c. The network address of the subnet. (Answer 178.200.127.0)
d. The subnet address of the IP address.
Here is the online calculator for subnetting
http://www.subnetmask.info/
http://www.subnet-calculator.com/subnet.php?net_class=B
NOTE. This is just for concept not included in the answer
The subnet mask determines what portion of the TCP/IP address represents your network
and what portion can be used for your hosts. The network number represents the street I
live on, and the host portion is used for the numbers on all the houses on my street.
A subnet mask of 255.255.255.0 means that the first three octets of the address will be
used for the network, and thus our network number is 192.168.1. This means we can
have 254 computers on this network, because the fourth octet is not being used by the
network portion of the address. We know this because of the 0 in the subnet mask
(255.255.255.0).
Question No: 28 ( Marks: 5 )
How does IP software reassemble fragments that arrive out of order?
A unique ID number of each outgoing datagram
 When a router fragments the datagram, the router copies the ID number into each
fragment.
 The fragment OFFSET field tells a receiver how to order fragmentswithin a given
datagram
 The process of creating a copy of the original datagram from fragments is
called reassembly.
Question No: 29 ( Marks: 5 )
Write down the comparison of Distance- vector and Link – state algorithm?
COMPARISON:
DISTANCE-VECTOR ROUTING:
• It is very simple to implement.
• Packet switch updates its own routing table first.
• It is used in RIP.
LINK-STATE ALGORITHM:
• It is much more complex.
• Switches perform independent computations.
 www.vuassassins.com

• It is used in OSPF.
Question No: 30 ( Marks: 10 )
Descibe in detail what is the purpose of the following table? What sort of information can
be extracted?
First Four Bits Table index in Class of Address
Of address decimal
0000 0 A
0001 1 A
0010 2 A
0011 3 A
0100 4 A
0101 5 A
0110 6 A
0111 7 A
1000 8 B
1001 9 B
1010 10 B
1011 11 B
1100 12 C
1101 13 C
1110 14 D
1111 15 E
The table shows in the figure, how the class of address can be computed.
Question No: 31 ( Marks: 10 )
List down and describe atleast five charachteristics of Routing Information
Protocol.
ROUTING INFORMATION PROTOCOL (RIP):
It has the following characteristics:
"It is used for routing within an autonomous system (IGP).
"Hop Count Metric: RIP measures distance in network hops, where each network
between the source and destination counts as a single hop.
"It uses UDP for all message transmissions.
"RIP is used over LAN. Version 1 of RIP uses hardware broadcast and version 2 allows
delivery via multicast.
"It can be used to advertise default route propagation. An organization can use RIP to
install a default route in each router.
"It uses distance vector algorithm.
"RIP allows hosts to listen passively and update its routing table
FINALTERM EXAMINATION
Fall 2008
CS610- Computer Network
Ref No: 325624
Time: 120 min
Marks: 70
 www.vuassassins.com

Question No: 1 ( Marks: 1 ) - Please choose one

The number of connections needed for N computer in direct point to point
communication is equal to:
► (N2 –N)/2
► N(N- 1)
► N2
► None of the given
For ‘n’ computers connections in direct point to point communication = (n^2 –n)/2.

Question No: 2 ( Marks: 1 ) - Please choose one

When an application--------------- data, it makes a copy of the data available to all other
computers on the network.
► Broadcasting
► Multicasting
► Unicasting
► None of the given (not sure)
Question No: 3 ( Marks: 1 ) - Please choose one
Ethernet uses a ------ bit static addressing scheme in which each device is assigned a
unique address by the manufacturer.
► 64
► 48
► 32
►8
Ethernet uses a 48-bit static addressing scheme
Question No: 4 ( Marks: 1 ) - Please choose one
A system with redundant bridges might have a problem with_______ in the system.
► Loop
► Filters
► Spanning Trees
► All given choices
Reference not available
Question No: 5 ( Marks: 1 ) - Please choose one
The product of delay and throughput measures the _____ of data that can be present on
the network.
► Area
► Volume
► Length
► None of the given
It is computed as delay time multiplied by effective throughput. It measures amount of
data that can be present in the network
Question No: 6 ( Marks: 1 ) - Please choose one
Connectionless service, Message-Oriented protocol, best effort delivery service, arbitrary
interaction and operating system independent are the characteristics of _____________
► TCP
► UDP
► IP
 www.vuassassins.com

► None of the given

UDP has the following characteristics.
• It is an end-to-end protocol. It provides application-to-application communication.
• It provides connectionless service.
• It is a Message-Oriented protocol.
• It uses best-effort delivery service.
• It follows arbitrary interaction.
• It is operating system independent
Question No: 7 ( Marks: 1 ) - Please choose one
Connection-oriented service, Point-to-point, Complete reliability, Full-duplex
communication, Stream interface, Reliable connection startup and Graceful connection
shutdown are the services provided by__________
► None of the given
► TCP
► UDP
► IP
SERVICE PROVIDED BY TCP:
Following are the services provided by TCP:
• Connection-oriented service
• Point-to-point
• Complete reliability
• Full-duplex communication
• Stream interface
• Reliable connection startup
• Graceful connection shutdown
Question No: 8 ( Marks: 1 ) - Please choose one
The process of using a routing table to select a next hop for a given datagram is
called_________
► Encapsulation
► Reassembling
► Routing or forwarding
► None of the given
Reference not available
Question No: 9 ( Marks: 1 ) - Please choose one
____________ uses distance vector approach to define routing
► BGP
► OSPF
► RIP
► None of the given
DISTANCE-VECTOR ROUTING:
• It is very simple to implement.
• Packet switch updates its own routing table first.
• It is used in RIP.
Question No: 10 ( Marks: 1 ) - Please choose one
A multicast routing scheme in which the protocol software builds a delivery tree from a
central point is called__________
 www.vuassassins.com

► Distance Vector Multicast Routing Protocol (DVMRP)

► Core Based Trees (CBT)
► Protocol Independent Multicast_ Sparse Mode (PIM-SM)
► Protocol Independent Multicast _ Dense Mode (PIM-DM)
CORE BASED TREES (CBT):
A multicast routing scheme in which the protocol software builds a delivery tree
from a central point.
Question No: 11 ( Marks: 1 ) - Please choose one
One repeater _______, two repeaters ________ the maximum cable length limitation.
► doubles, cancel
► doubles, triple
► square roots, cude roots
► and, triple
One repeater doubles, two repeaters triple the maximum cable length limitation.
Question No: 12 ( Marks: 1 ) - Please choose one
Whenever it handles a packet, IP software needs to separate the destination address into a
_________ and ___________.
► postfix, Infix
► non of these
► Infix, prefix
► prefix, suffix
Whenever it handles a packet, IP software needs to separate the destination address into
a prefix and suffix
Question No: 13 ( Marks: 1 ) - Please choose one
Although message exchange can be used to bind addresses, sending a request for each
binding is hopelessly inefficient.
► True
► False
CASHING ARP RESPONSES:
Although message exchange can be used to bind addresses, sending a request for
each binding is hopelessly inefficient.
Question No: 14 ( Marks: 1 ) - Please choose one
ARP is almost always used to bind a ___-bit IP address to a ___-bit Ethernet address.
► 32, 48
► 24, 32
► 32, 64
► 32, 128
ARP is almost always used to bind a 32-bit IP address
to a 48-bit Ethernet address
Question No: 15 ( Marks: 1 ) - Please choose one
End-to-end delivery service is connection oriented.
► True
► False
End-to-end delivery service is connection less
Question No: 16 ( Marks: 1 ) - Please choose one
A single networking technology is best for all needs.
 www.vuassassins.com

► True

► False

There is no single networking technology that is best for all needs

Question No: 17 ( Marks: 1 ) - Please choose one
In the 1970s large organizations began to acquire multiple networks. Each network in the
organization formed island. Employees needed to choose a computer appropriate for each
task. So they needed multiple screens, keyboards and computers.
► False
► True
In the 1970s large organizations began to acquire multiple networks. Each network in the
organization formed island. Employees needed to choose a computer appropriate for
each task. So they needed multiple screens, keyboards and computers.
Question No: 18 ( Marks: 1 ) - Please choose one
Which method of Address Resolution Protocol is useful with any hardware?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data
Exchange?
►T
Features Types of
►C
Resolution
►D
► C, D Use full with any hardware T
Address change affects all hosts T
Protocol address is determined C
by hardware address

Question No: 19 ( Marks: 1 ) - Please choose one

In which method of Address Resolution Protocol the protocol address is determined by
hardware address?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data
Exchange?
►T Features Types of
►D Resolution
►C
Use full with any hardware T
► T, C
Address change affects all hosts T
Protocol address is determined C
by hardware address

Question No: 20 ( Marks: 1 ) - Please choose one

We use the term _______ to refer to a measure of the path that routing software use when
choosing a route.
► routing path
 www.vuassassins.com

► routing metric
► routing
switching
We use the termrouting metric to refer to a measure of the path that routing software use
when choosing a route
Question No: 21 ( Marks: 2 )
Is there a comparison between TCP/IP reference model and ISO reference model.
Question No: 22 ( Marks: 2 )
Does OSPF only share information within an area or does it allow communication
between areas?
OSPF allows subdivision of Autonomous System into areas. The link-status
information is propagated within an area. The routes are summarized before being
propagated to another area. It reduces overhead (less broadcast traffic). Because it allows
a manager to partition the routers and networks in an autonomous system into multiple
areas, OSPFcan scale to handle a larger number of routers than other IGPs.
Question No: 23 ( Marks: 2 )
What are the implementations of Network Address Translation?
Question No: 24 ( Marks: 3 )
Describe the difference between static and dynamic routing?
STATIC ROUTING:
It is one of the forms of Internet routing. In Static routing, the table is initialized
when system boots and there is no further changes.
DYNAMIC ROUTING:
In dynamic routing the table is initialized when system boots. It includes routing
software which learns routes and updates table. In this way continuous changes are
possible due to routing software.
Question No: 25 ( Marks: 3 )
What is the first address in the block if one of the addresses is 140.120.84.24/20?
The first address in the block is 140.120.80.0/20
WE can use the following short cut to find the first address
1. divide the prefix length into four groups(corresponding to the four bytes in an
address) and find the number of 1s in each group
2. if the number of 1s in a group is 8 the corresponding byte in the first address is the
same (no change)
3. If the number of 1s in the group is zero (no1s), the corresponding byte in the first
address is 0
4. if the number of 1s in a group is between zero and eight, we keep the
corresponding bits in that group
Question No: 26 ( Marks: 3 )
Write three new features of IPV6.
The new features of IPV6 are as follows:
• IPV6 addresses are 128 bits.
• Header format is entirely different.
• Additional information is stored in optional extension headers, followed by data.
• Flow label and quality of service allows audio and video applications to establish
 www.vuassassins.com

appropriate connections.
• New features can be added more easily. So it is extensible.
Question No: 27 ( Marks: 5 )
What is the difference between an interior gateway protocol and an exterior
gateway protocol? Name an example of each.
INTERIOR GATEWAY PROTOCOLS (IGPs):
It is used among routers within autonomous system. The destinations lie within IGP.
EXTERIOR GATEWAY PROTOCOLS (EGPs):
It is used among autonomous systems. The destinations lie throughout Internet
Question No: 28 ( Marks: 5 )
As the Internet grew, the original Classful addressing scheme became a limitation,
what is the designed solution.

Question No: 29 ( Marks: 5 )

What are IPv6 ADDRESS NOTATION?
IPv6 ADDRESS NOTATION:
128-bit addresses unwidely in dotted decimal; requires 16 numbers:
105.220.136.100.255.255.255.255.0.0.18.128.140.10.255.255
Groups of 16-bit numbers in hex separated by colons – colon hexadecimal (or colon hex).
69DC: 8864:FFFF: FFFF: 0:1280:8C0A:FFFF
Zero-compression – series of zeroes indicated by two colons
FF0C: 0:0:0:0:0:0:B1
FF0C::B1
IPv6 address with 96 leading zeros is interpreted to hold an IPv4 address.
Question No: 30 ( Marks: 10 )
LIST SOME CHARACTERISTICS OF A CLIENT.
CHARACTERISTICS OF A CLIENT:
The characteristics of a client are explained below:
"Client is an arbitrary application program.
"It becomes client temporarily.
"It can also perform other computations.
"It is invoked directly by the user.
"It runs locally on the user’s computer.
"It actively initiates contact with a server.
"It contacts one server at a time.
Question No: 31 ( Marks: 10 )
With help of the diagram below, explain TCP Segment Format:
 www.vuassassins.com

TCP uses single format for all messages. TCP uses the term segment to refer to
a message. Each message sent from TCP on onemachine to TCP on another machine uses
this format including data andacknowledgement

Size
Field Name Description
(bytes)
ephemeral (client) port numberSourcePort: The 16-bit
port number of the process that originated the TCP
SourcePort 2
segment on the source device. This will normally be
an for a request sent by a client to a server
DestinationPort: The 16-bit port number of the process
DestinationPort 2 that is the ultimate intended recipient of the message on
the destination device.
Sequence Number: For normal transmissions, the
Sequence sequence number of the first byte of data in this segment.
4
Number In a connection request (SYN) message, this carries the
initial sequence number (ISN) of the source TCP.
Acknowledgment Number: When the ACK bit is set, this
segment is serving as an acknowledgment (in addition to
Acknowledgment
4 other possible duties) and this field contains the sequence
Number
number the source is next expecting the destination to
send.
Window: Indicates the number of octets of data the sender
of this segment is willing to accept from the receiver at
Window 2
one time. This normally corresponds to the current size of
the buffer allocated to accept data for this connection.
16-bit checksum for data integrity
protectionChecksum: A , computed over the entire TCP
Checksum 2 datagram plus a special “pseudo header” of fields. It is
used to protect the entire TCP segment against not just
errors in transmission, but also errors in delivery.
Urgent Pointer: Used in conjunction with
Urgent Pointer 2
the URG control bit for priority data transfer. This field
 www.vuassassins.com

contains the sequence number of the last byte of urgent

data.
Options: TCP includes a generic mechanism for including
one or more sets of optional data in TCP segment. Each
of the options can be either one byte in length or variable
length. The first byte if the option kind subfield and it’s
Options Variable
value specifies the type of option, which in turn indicates
whether the option is just a single byte or multiple bytes.
Options that are many bytes consist of three fields

Note this table is also included in options column. options may vary
Subfield Size Description
name (bytes)
Option- 1 Option-kind: specifies the option type
kind
Option- 1 Option-length: the length of the entire option in
length: bytes, including the option-kind and option-
length fields.
Option-data Variable Option-data: the option data itself in at least one
oddbll case, this field is omitted(making option
length equal to 2)

FINALTERM EXAMINATION
Fall 2008
CS610- Computer Network
Question No: 1 ( Marks: 1 ) - Please choose one
In Direct point to point communication adding the Nth computer requires------------ new connections.
► None of the given
► N2
► N-1
► (N2 –N)/2
disadvantage In Direct point to point communication is that adding a new computer to the network
requires N-1 new connections .(P# 23)
Question No: 2 ( Marks: 1 ) - Please choose one
In Point-to-Point topology there are two topologies.

► Tree and Ring

► Star and Ring
► Star and Tree
► None of the given
POINT-TO-POINT:
In Point-to-Point topology there are two topologies.
1) STAR topology
2) TREE topology
 www.vuassassins.com

Question No: 3 ( Marks: 1 ) - Please choose one

In -------------, network occupies the smaller area like a room a floor or a building
► LAN
► WAN
► MAN
► None of the given
In LAN network occupies the smaller area like a room a floor or a building.(P# 4)
Question No: 4 ( Marks: 1 ) - Please choose one
Hardware that calculates a CRC uses two simple components.
► AND unit and XOR unit
► Shift register and XOR unit
► Shift register and AND unit
► None of the given
CRC uses just two hardware components:
Shift register
Exclusive OR ( XOR unit ) .(P# 20)
Question No: 5 ( Marks: 1 ) - Please choose one
CRC can detect more errors than a simple checksum.
► true
► false
Question No: 6 ( Marks: 1 ) - Please choose one
The Gigabit Ethernet hardware operates at a rate of --------
► 10 Mbps
► 100 Mbps
► 1000 Mbps
► None of the given
Gigabit Ethernet that operates at 1 Gbps (1000 Mbps) over fiber optics and twisted pair Ethernet
cables.
Question No: 7 ( Marks: 1 ) - Please choose one
Formally named __________ informally known as the twisted pair Ethernet or TP Ethernet.
► 10 Base 2
► 10 Base 5
► 10 Base T
► None of the given
10BASE-T:
This is another standard of wiring scheme. It is commonly called 10Base-T, Twisted Pair or TP
Ethernet. (P# 43)
Question No: 8 ( Marks: 1 ) - Please choose one
An interface for thin Ethernet must have an ____________ connector , and must generate signals
according to the_____________ specification.
► RJ-45, 10 Base T
► RJ-45, 10 Base 5
► BNC, 10 Base 2
► BNC, 10 Base T
Question No: 9 ( Marks: 1 ) - Please choose one
A system with redundant bridges might have a problem with_______ in the system.
► Loop
► Filters
 www.vuassassins.com

► Spanning Trees
► All given choices
Question No: 10 ( Marks: 1 ) - Please choose one
________ computes shortest paths in a graph by using weights on edges as a measure of distance.
► Greedy algorithm
► Distance vector algorithm
► Dijksta’s algorithm
► Non of the given
Djikstra’s algorithm can accommodate weights on edges in graph. The shortest
path is then the path with lowest total weight (sum of the weight with all edges). It should
be noted that the shortest path is not necessarily with fewest edges (or hops).
Question No: 11 ( Marks: 1 ) - Please choose one
Basic LAN technologies such as Ethernet, Token Ring, and FDDI use a _____.
► Connectionless service paradigm
► Connection-oriented service paradigm
► Both Connectionless and Connection-oriented service paradigm
► None of the given
Question No: 12 ( Marks: 1 ) - Please choose one
_______ protocols of TCP/IP layering model specify how to ensure reliable transfer.
► Physical Layer
► Network Interface Layer
► Internet Layer
► Transport Layer
LAYER 4: ensure reliable transfer layer 4 in TCP layering model is transport layer.
Question No: 13 ( Marks: 1 ) - Please choose one
An Internet Address (IP address) is a unique __________ binary number assigned to a host and used
for all communication with host
► 48-bit
► 32-bit
► 24-bit
► None of the given
An Internet address (IP address) is a unique 32-bit binary number assigned to a
host and used for all communication with the host
Question No: 14 ( Marks: 1 ) - Please choose one
The address __________ identifies the physical network to which the computer is attached, while the
_______ identifies an individual computer on that network.
► prefix , suffix
► suffix , prefix
► suffix , suffix
► None of the given
PREFIX:
It identifies the physical network to which the computers are attached.
SUFFIX:
It identifies an individual computer on the network.
Question No: 15 ( Marks: 1 ) - Please choose one
___________ places the boundary between the first and second octets
► Class A
► Class B
 www.vuassassins.com

► Class C
► Class D
Class A places the boundary between the first and second octets. Class B places the boundary between
the second and third octets, and class C places the boundary between the third and fourth octets.
Question No: 16 ( Marks: 1 ) - Please choose one
___________ places the boundary between the third and fourth octets.
► Class A
► Class B
► Class C
► Class D
Class A places the boundary between the first and second octets. Class B places the boundary between
the second and third octets, and class C places the boundary between the third and fourth octets.
Question No: 17 ( Marks: 1 ) - Please choose one
________ field of header indicates whether a datagram is a fragment or a complete datagram.
► FLAGS
► FLAGMENT OFFSET
► IDENTIFICATION
► None of the given
FRAGMENTATION:
IP uses fragmentation i.e. datagrams can be split into pieces to fit in network with small MTU. Each
fragment is an independent datagram. It includes all header fields. Bit in header indicates that the
datagram is a fragment
Question No: 18 ( Marks: 1 ) - Please choose one
______ provides connectionless service.
► TCP
► UDP
► IP
► None of the given
UDP has the following characteristics.
• It is an end-to-end protocol. It provides application-to-application communication.
• It provides connectionless service.
• It is a Message-Oriented protocol.
• It uses best-effort delivery service.
• It follows arbitrary interaction.
• It is operating system independent
Question No: 19 ( Marks: 1 ) - Please choose one
UDP and TCP are both_________ layer protocols
► Physical
► Data link
► Network
► Transport
Question No: 20 ( Marks: 1 ) - Please choose one
Connection-oriented service, Point-to-point, Complete reliability, Full-duplex communication, Stream
interface, Reliable connection startup and Graceful connection shutdown are the services provided
by__________
► IP
► None of the given
► TCP
 www.vuassassins.com

► UDP
SERVICE PROVIDED BY TCP:
Following are the services provided by TCP:
• Connection-oriented service
• Point-to-point
• Complete reliability
• Full-duplex communication
• Stream interface
• Reliable connection startup
• Graceful connection shutdown
Question No: 21 ( Marks: 1 ) - Please choose one
_______ protocols of TCP/IP layering model specify how to ensure reliable transfer.
► Physical Layer
►Network Interface Layer
► Internet Layer
► Transport Layer
LAYER 4: ensure reliable transfer layer 4 in TCP layering model is transport layer
Question No: 22 ( Marks: 1 ) - Please choose one
________identifies which application program on receiving computer should receive the data
► Logical address
► Source port
► Destination Port
► None of the given
FieldDestinationPort identifies which application program on receiving computer should receive the
data. While field source port identifies the application programs that sent the data. (reference from E-
books)
Question No: 23 ( Marks: 1 ) - Please choose one
________ identifies the application program that sent the data.
► DestinationPort
► Source port
► Logical address
► None of the given
FieldDestinationPort identifies which application program on receiving computer should receive the
data. While field source port identifies the application programs that sent the data. (reference from E-
books)
Question No: 24 ( Marks: 1 ) - Please choose one
The Border Gateway Protocol (BGP) uses_________ for all communication
► UDP
► TCP
► Both UDP and TCP
► None of the given
BORDER GATEWAY PROTOCOL:
It is most popular Exterior Gateway Protocol in Internet. It has following characteristics:
"It provides routing among autonomous systems (EGP).
"It provides policies to control routes advertised.
"It uses reliable transport (TCP).
Question No: 25 ( Marks: 1 ) - Please choose one
Which of the following protocols allows the sender and receiver to enforce polices.
 www.vuassassins.com

► RIP
► OSPF
► BGP
► RIP and OSPF
Question No: 26 ( Marks: 1 ) - Please choose one
____________ uses distance vector approach to define routing
► BGP
► OSPF
► RIP
► None of the given
ROUTING INFORMATION PROTOCOL (RIP):
It has the following characteristics:
"It is used for routing within an autonomous system (IGP).
"Hop Count Metric: RIP measures distance in network hops, where each network
between the source and destination counts as a single hop.
"It uses UDP for all message transmissions.
"RIP is used over LAN. Version 1 of RIP uses hardware broadcast and version 2 allows
delivery via multicast.
"It can be used to advertise default route propagation. An organization can use RIP to
install a default route in each router.
"It uses distance vector algorithm.
Question No: 27 ( Marks: 1 ) - Please choose one
ICMP message transport is acted upon by getting ICMP encrypted in IP.
► True
► False
ICMP message transport is acted upon by getting ICMP encapsulated in IP (P# 117)
Question No: 28 ( Marks: 1 ) - Please choose one
Protocol addresses are abstractions provided by ___________.
► hardware
► software
► operating system
► internet
Protocol addresses are abstractions provided by software
Question No: 29 ( Marks: 1 ) - Please choose one
These packets serve same purpose on ________ as frames on ______
► Intranet, LAN
► Internet, WAN
► Intranet, WAN
► Internet, LAN
VIRTUAL PACKETS:
These packets serve same purpose in Internet as frames on LAN
Question No: 30 ( Marks: 1 ) - Please choose one
Address mask defines how many bits of address are in suffix?
► True
► False
Address mask defines how many bits of address are in prefix. Prefix defines how much of address
used to identify network.
Question No: 31 ( Marks: 1 ) - Please choose one
 www.vuassassins.com

A single networking technology is best for all needs.

► True
► False
There is no single networking technology that is best for all needs
Question No: 32 ( Marks: 1 ) - Please choose one
A computer attached to a given network can only communicate with other computers attached to the
same network. Is this a problem with multiple networks?

► True
► False
The chief problems with multiple networks are as follows:
• A computer attached to a given network can only communicate with other
computers attached to the same network.
Question No: 33 ( Marks: 1 ) - Please choose one
The term self-identifying is used for Classful IP addresses because the class of the address can be
computed from the address__________.
► itself
► prefix
► suffix
► mask
Classful IP addresses are self-identifying because the class of the address can be computed from the
address itself
Question No: 34 ( Marks: 1 ) - Please choose one
Find the class of the address.
10100111 11011011 10001011 01101111
►A
►B
►E
►C
Reference table handouts P # 87
Question No: 35 ( Marks: 1 ) - Please choose one
Find the class of the address:
11110011 10011011 11111011 00001111
►A
►C
►E
►B
Reference table handouts P # 87
Question No: 36 ( Marks: 1 ) - Please choose one
In which method of Address Resolution Protocol the protocol address is determined by hardware
address?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?
►T
►D
►C
► T, C
Reference table handouts P # 97
Question No: 37 ( Marks: 1 ) - Please choose one
 www.vuassassins.com

Which method of Address Resolution Protocol requires hardware broadcast?

Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?
►D
►T
►C
► T, D
Reference table handouts P # 97
Question No: 38 ( Marks: 1 ) - Please choose one
Which method of Address Resolution Protocol resolution with minimum delay?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?
► T, D
►c
►T
► T, C
Reference table handouts P # 97
Question No: 39 ( Marks: 1 ) - Please choose one
In which method of Address Resolution Protocol the implimentation is more difficult?
Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data Exchange?
► T, C
►T
►C
►D
Reference table handouts P # 97
Question No: 40 ( Marks: 1 ) - Please choose one
On of the design goals for unicast route propagation is __________.
► Consistency
► inconsistency
► stability
► dynamic addressing
On of the design goals for unicast route propagation is stability—continual changes in route are
undesirable because they lead to higher jitter and datagram arriving out of order. Thus, once a
unicast routing protocol finds a shortest path, it usually retains the route until a failure makes the
path unusable. (Reference from E-book)
Question No: 41 ( Marks: 1 ) - Please choose one
Propagation multicast routing information differs dramatically from unicast route propagation?
► True
► False
Propagating multicast routing information differs dramatically from unicast route propagation. The
difference arises because internet multicast allows dynamic group membership and autonomous
senders
Question No: 42 ( Marks: 1 ) - Please choose one
The IP multicast abstraction allows an application running on an arbitrary computer to leave a
multicast group at any time. While _____________ application on a computer remain a member of a
group.
► One or more
► only one
► no
► many
 www.vuassassins.com

Question No: 43 ( Marks: 1 ) - Please choose one

To save traffic, an EGP does not summerize routing information from the autonomous system before
passing it to another autonomous system.
► True
► False
To save traffic, an EGP summerize routing information from the autonomous system before passing it
to another autonomous system. More important an EGP implements policy constraints that allow a
system manager to determine exactly what information is released outside the
organization. (Reference from E-book)
Question No: 44 ( Marks: 1 ) - Please choose one
In IPv6 the type of address used for collection of computers with same prefix. Are known
as_________.
► Anycast
► Unicast
► Multicast
► Non of the given
Following are special types of addresses, IPv6 uses:
Unicast: It is used for single destination computer.
Multicast: It is used for multiple destinations; possibly not at same site.
Cluster: This type of address is used for collection of computers with same prefix,
datagram is delivered to one out of cluster.
Question No: 45 ( Marks: 1 ) - Please choose one
Special types of addresses in IPv6 used for multiple destinations; possibly not at same site. Are known
as_________.
► Unicast
► Anycast
► Multicast
► Non of the given
Following are special types of addresses, IPv6 uses:
Unicast: It is used for single destination computer.
Multicast: It is used for multiple destinations; possibly not at same site.
Cluster: This type of address is used for collection of computers with same prefix,
datagram is delivered to one out of cluster.
Question No: 46 ( Marks: 1 ) - Please choose one
UDP offers application programs a Message-Oriented Interface, applications can depend on protocol
to preserve data boundaries.
► True
► False
UDP offers application programs a Message-Oriented Interface. It does not divide messages into
packets for transmission and does not combine messages for delivery.
ADVANTAGES:
• Applications can depend on protocol to preserve data boundaries.
Question No: 47 ( Marks: 1 ) - Please choose one
Reliability is the responsibility of the _________ layer
► Network
► Datalink
► Transport
► Application
 www.vuassassins.com

Reliability is the responsibility of the Transport layer

Question No: 48 ( Marks: 1 ) - Please choose one
TCP uses _______ mechanism to control the flow of data.
► door
► window
► acknowledgment
► retransmission
TCP uses window mechanism to control the flow of data.
Question No: 49 ( Marks: 1 ) - Please choose one
The time for acknowledgement to arrival of packet depends on.
► Distance to destination and Current traffic conditions
► Current traffic conditions
► Distance to destination
► non of these
The time for acknowledgement to arrive depends on:
• Distance to destination
• Current traffic conditions
Question No: 50 ( Marks: 1 ) - Please choose one
FDDI can transmits data at a rate of ----------
► 100 million bits per second
► 10 million bits per second
► 1000 million bits per second
► None of the given
FDDI: Fiber distributed data interconnect (FDDI) is another ring technology. Its most
important features are:
It uses fiber optics between stations and transmits data at 100Mbps.
Question No: 51 ( Marks: 2 )
How can we prove that we have 2,147,483,648 addresses in class A?

Question No: 52 ( Marks: 2 )

Why is internet multicast routing difficult?

Question No: 53 ( Marks: 2 )

Define what is the Extension Headers in IPv6.

Question No: 54 ( Marks: 3 )

How does IP software reassemble fragments that arrive out of order?

Question No: 55 ( Marks: 3 )

What is the first address in the block if one of the addresses is 167.199.170.82/27?

Question No: 56 ( Marks: 3 )

In internet routing how does a host join or leave a group?
 www.vuassassins.com

Question No: 57 ( Marks: 5 )

What is the role of area in open shortest path first (OSPF)?
Question No: 58 ( Marks: 5 )
Write a note on Address Resolution.

Total Question 40
30 MCQs
70 % mcqs coming from attached file
some mcqs given below

1) When an application--------------- data, it makes a copy of the data available to all other
computers on the network.

► Broadcasting

► Multicasting

► Unicasting

► None of the given

2) Ethernet uses a ------ bit static addressing scheme in which each device is assigned a
unique address by the manufacturer.

► 64

► 48

► 32

►8

3) The product of delay and throughput measures the _____ of data that can be present on
the network.

► Area
 www.vuassassins.com

► Volume (supposition)

► Length

► None of the given

4) Connectionless service, Message-Oriented protocol, best effort delivery service,

arbitrary interaction and operating system independent are the characteristics of
_____________

► TCP

► UDP

► IP

► None of the given

5) ____________ uses distance vector approach to define routing

► BGP

► OSPF

► RIP

► None of the given

6) Whenever it handles a packet, IP software needs to separate the destination address

into a _________ and ___________.

► postfix, Infix

► non of these

► Infix, prefix

► prefix, suffix

7) ARP is almost always used to bind a ___-bit IP address to a ___-bit Ethernet address.

► 32, 48

► 24, 32

► 32, 64
 www.vuassassins.com

► 32, 128

8) Which method of Address Resolution Protocol is useful with any hardware?

Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data
Exchange?

►T

► C (Supposition)

►D

► C, D

9) In which method of Address Resolution Protocol the protocol address is determined by

hardware address?

Were "T" stands for Table lookup, "C" for Closed-form Computation and "D" for Data
Exchange?

►T

►D

►C

► T, C

10 )We use the term _______ to refer to a measure of the path that routing software use
when choosing a route.

► routing path

► routing metric

► routing

► switching

11) A network uses a ------arranges for computers to be connected in a closed loop.

► Star Topology

► Ring Topology
 www.vuassassins.com

► Bus Topology

► None of the given

12) An interface for thin Ethernet must have an ____________ connector , and must
generate signals according to the_____________ specification.

► RJ-45, 10 Base T

► RJ-45, 10 Base 5

► BNC, 10 Base 2

► BNC, 10 Base T

13) _______ protocols of TCP/IP layering model specify how to ensure reliable transfer.

► Physical Layer

► Network Interface Layer

► Internet Layer

► Transport Layer

14)____________ uses distance vector approach to define routing

► BGP

► OSPF

► RIP

► None of the given

4 question of 2 marks
i) question regarding Ip-multicasting (arbitrary computer to join multicast
group)
ii) CRC detect what kind of error
iii) define IPV6 NEXT HEADER
iv) question regarding the metric of routing protocol
4 question of 3 marks
i) describe three feature of closed-form computation
ii) TCP timer for retransmission
iii) Difference between forwarding and routing
 www.vuassassins.com

iv) Define ATM techonology

2 question of 10 marks
i) Define the CHARACTERISTICS OF UDP.
ii) question regarding the EGP (EXTERIOR GATEWAY PROTOCOL)