Switch> ^

Switch> % Invalid input detected at '^' marker.

Switch>eneble

Translating "eneble"...domain server (255.255.255.255) etage3(config)#vlan 110

% Unknown command or computer name, or unable to find computer etage3(config-vlan)# congig t

address
^

% Invalid input detected at '^' marker.

Switch>

Switch>
etage3(config-vlan)#name ADMIN
Switch>
etage3(config-vlan)#vlan 130
Switch>
etage3(config-vlan)#end
Switch>en
etage3#
Switch#config t
%SYS-5-CONFIG_I: Configured from console by console
Enter configuration commands, one per line. End with CNTL/Z.

Switch(config)# hostname etage3

etage3#show vlan brief
etage3(config)#vlan110

^
VLAN Name Status Ports
% Invalid input detected at '^' marker.
---- -------------------------------- --------- -------------------------------

1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

etage3(config)#vlan110
Fa0/5, Fa0/6, Fa0/7, Fa0/8
 Fa0/9, Fa0/10, Fa0/11, Fa0/12 etage3#

Fa0/13, Fa0/14, Fa0/15, Fa0/16 %SYS-5-CONFIG_I: Configured from console by console

Fa0/17, Fa0/18, Fa0/19, Fa0/20

Fa0/21, Fa0/22, Fa0/23, Fa0/24 etage3#config t

Gig0/1, Gig0/2 Enter configuration commands, one per line. End with CNTL/Z.

110 ADMIN active etage3(config)#vlan 130

130 VLAN0130 active etage3(config-vlan)#name COMM

1002 fddi-default active etage3(config-vlan)#

1003 token-ring-default active etage3(config-vlan)#END

1004 fddinet-default active etage3#

1005 trnet-default active %SYS-5-CONFIG_I: Configured from console by console

etage3#config

Configuring from terminal, memory, or network [terminal]? etage3#show vlan brief

Enter configuration commands, one per line. End with CNTL/Z.

etage3(config)#clan 120 VLAN Name Status Ports

^ ---- -------------------------------- --------- -------------------------------

% Invalid input detected at '^' marker. 1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5, Fa0/6, Fa0/7, Fa0/8

etage3(config)#vlan 110 Fa0/9, Fa0/10, Fa0/11, Fa0/12

etage3(config-vlan)#end Fa0/13, Fa0/14, Fa0/15, Fa0/16

 Fa0/17, Fa0/18, Fa0/19, Fa0/20 % Unknown command or computer name, or unable to find computer
address
Fa0/21, Fa0/22, Fa0/23, Fa0/24

Gig0/1, Gig0/2
etage3#
110 ADMIN active
etage3#end
130 COMM active
Translating "end"...domain server (255.255.255.255)Enter configuration
1002 fddi-default active
commands, one per line. End with CNTL/Z.
1003 token-ring-default active
etage3(config)#
1004 fddinet-default active
etage3(config)#
1005 trnet-default active
etage3(config)#
etage3#config
etage3(config)#
Configuring from terminal, memory, or network [terminal]?
% Unknown command or computer name, or unable to find computer
Enter configuration commands, one per line. End with CNTL/Z. address

etage3(config)#vlan 120

etage3(config-vlan)#name DEVE etage3(config)#int f0/1

etage3(config-vlan)#END etage3(config-if)#swit

etage3# % Incomplete command.

%SYS-5-CONFIG_I: Configured from console by console etage3(config-if)#switch port mode access

etage3#END % Invalid input detected at '^' marker.

Translating "END"...domain server (255.255.255.255)

etage3(config-if)#switchport access vlan 110 1003 token-ring-default active

etage3(config-if)#end 1004 fddinet-default active

etage3# 1005 trnet-default active

%SYS-5-CONFIG_I: Configured from console by console etage3#

etage3#

etage3#show vlan brief etage3#config

Configuring from terminal, memory, or network [terminal]?

VLAN Name Status Ports Enter configuration commands, one per line. End with CNTL/Z.

---- -------------------------------- --------- ------------------------------- etage3(config)#int range f0/2-6

1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5 etage3(config-if-range)#switchport access vlan 110

Fa0/6, Fa0/7, Fa0/8, Fa0/9 etage3(config-if-range)#end

Fa0/10, Fa0/11, Fa0/12, Fa0/13 etage3#

Fa0/14, Fa0/15, Fa0/16, Fa0/17 %SYS-5-CONFIG_I: Configured from console by console

Fa0/18, Fa0/19, Fa0/20, Fa0/21

Fa0/22, Fa0/23, Fa0/24, Gig0/1 etage3#show interface status

Gig0/2 Port Name Status Vlan Duplex Speed Type

110 ADMIN active Fa0/1 Fa0/1 notconnect 110 auto auto 10/100BaseTX

120 DEVE active Fa0/2 notconnect 110 auto auto 10/100BaseTX

130 COMM active Fa0/3 notconnect 110 auto auto 10/100BaseTX

1002 fddi-default active Fa0/4 notconnect 110 auto auto 10/100BaseTX

Fa0/5 notconnect 110 auto auto 10/100BaseTX Gig0/1 notconnect 1 auto auto 10/100BaseTX

Fa0/6 notconnect 110 auto auto 10/100BaseTX Gig0/2 notconnect 1 auto auto 10/100BaseTX

Fa0/7 notconnect 1 auto auto 10/100BaseTX

Fa0/8 notconnect 1 auto auto 10/100BaseTX etage3#

Fa0/9 notconnect 1 auto auto 10/100BaseTX etage3#

Fa0/10 notconnect 1 auto auto 10/100BaseTX etage3#show vlan brief

Fa0/11 notconnect 1 auto auto 10/100BaseTX

Fa0/12 notconnect 1 auto auto 10/100BaseTX VLAN Name Status Ports

Fa0/13 notconnect 1 auto auto 10/100BaseTX ---- -------------------------------- --------- -------------------------------

Fa0/14 notconnect 1 auto auto 10/100BaseTX 1 default active Fa0/7, Fa0/8, Fa0/9, Fa0/10

Fa0/15 notconnect 1 auto auto 10/100BaseTX Fa0/11, Fa0/12, Fa0/13, Fa0/14

Fa0/16 notconnect 1 auto auto 10/100BaseTX Fa0/15, Fa0/16, Fa0/17, Fa0/18

Fa0/17 notconnect 1 auto auto 10/100BaseTX Fa0/19, Fa0/20, Fa0/21, Fa0/22

Fa0/18 notconnect 1 auto auto 10/100BaseTX Fa0/23, Fa0/24, Gig0/1, Gig0/2

Fa0/19 notconnect 1 auto auto 10/100BaseTX 110 ADMIN active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/20 notconnect 1 auto auto 10/100BaseTX Fa0/5, Fa0/6

Fa0/21 notconnect 1 auto auto 10/100BaseTX 120 DEVE active

Fa0/22 notconnect 1 auto auto 10/100BaseTX 130 COMM active

Fa0/23 notconnect 1 auto auto 10/100BaseTX 1002 fddi-default active

Fa0/24 notconnect 1 auto auto 10/100BaseTX 1003 token-ring-default active

1004 fddinet-default active etage3#config

1005 trnet-default active Configuring from terminal, memory, or network [terminal]?

etage3# Enter configuration commands, one per line. End with CNTL/Z.

etage3# etage3(config)#vlan 120

etage3(config-vlan)#name DEVE

VLAN Name Status Ports etage3(config-vlan)#END

---- -------------------------------- --------- ------------------------------- etage3#

1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4 %SYS-5-CONFIG_I: Configured from console by console

Fa0/5, Fa0/6, Fa0/7, Fa0/8

Fa0/9, Fa0/10, Fa0/11, Fa0/12 etage3#END

Fa0/13, Fa0/14, Fa0/15, Fa0/16 Translating "END"...domain server (255.255.255.255)

Fa0/17, Fa0/18, Fa0/19, Fa0/20 % Unknown command or computer name, or unable to find computer
address
Fa0/21, Fa0/22, Fa0/23, Fa0/24

Gig0/1, Gig0/2
etage3#
110 ADMIN active
etage3#end
130 COMM active
Translating "end"...domain server (255.255.255.255)Enter configuration
1002 fddi-default active
commands, one per line. End with CNTL/Z.
1003 token-ring-default active
etage3(config)#
1004 fddinet-default active
etage3(config)#
1005 trnet-default active
etage3(config)#
etage3(config)# 1 default active Fa0/2, Fa0/3, Fa0/4, Fa0/5

% Unknown command or computer name, or unable to find computer Fa0/6, Fa0/7, Fa0/8, Fa0/9
address
Fa0/10, Fa0/11, Fa0/12, Fa0/13

Fa0/14, Fa0/15, Fa0/16, Fa0/17

etage3(config)#int f0/1
Fa0/18, Fa0/19, Fa0/20, Fa0/21
etage3(config-if)#swit
Fa0/22, Fa0/23, Fa0/24, Gig0/1
% Incomplete command.
Gig0/2
etage3(config-if)#switch port mode access
110 ADMIN active Fa0/1
^
120 DEVE active
% Invalid input detected at '^' marker.
130 COMM active

1002 fddi-default active

etage3(config-if)#switchport access vlan 110
1003 token-ring-default active
etage3(config-if)#end
1004 fddinet-default active
etage3#
1005 trnet-default active
%SYS-5-CONFIG_I: Configured from console by console
etage3#

etage3#
etage3#show vlan brief
etage3#config

Configuring from terminal, memory, or network [terminal]?

VLAN Name Status Ports
Enter configuration commands, one per line. End with CNTL/Z.
---- -------------------------------- --------- -------------------------------
etage3(config)#int range f0/2-6
etage3(config-if-range)#switchport access vlan 110 Fa0/14 notconnect 1 auto auto 10/100BaseTX

etage3(config-if-range)#end Fa0/15 notconnect 1 auto auto 10/100BaseTX

etage3# Fa0/16 notconnect 1 auto auto 10/100BaseTX

%SYS-5-CONFIG_I: Configured from console by console Fa0/17 notconnect 1 auto auto 10/100BaseTX

Fa0/18 notconnect 1 auto auto 10/100BaseTX

etage3#show interface status Fa0/19 notconnect 1 auto auto 10/100BaseTX

Port Name Status Vlan Duplex Speed Type Fa0/20 notconnect 1 auto auto 10/100BaseTX

Fa0/1 notconnect 110 auto auto 10/100BaseTX Fa0/21 notconnect 1 auto auto 10/100BaseTX

Fa0/2 notconnect 110 auto auto 10/100BaseTX Fa0/22 notconnect 1 auto auto 10/100BaseTX

Fa0/3 notconnect 110 auto auto 10/100BaseTX Fa0/23 notconnect 1 auto auto 10/100BaseTX

Fa0/4 notconnect 110 auto auto 10/100BaseTX Fa0/24 notconnect 1 auto auto 10/100BaseTX

Fa0/5 notconnect 110 auto auto 10/100BaseTX Gig0/1 notconnect 1 auto auto 10/100BaseTX

Fa0/6 notconnect 110 auto auto 10/100BaseTX Gig0/2 notconnect 1 auto auto 10/100BaseTX

Fa0/7 notconnect 1 auto auto 10/100BaseTX

Fa0/8 notconnect 1 auto auto 10/100BaseTX etage3#

Fa0/9 notconnect 1 auto auto 10/100BaseTX etage3#

Fa0/10 notconnect 1 auto auto 10/100BaseTX etage3#show vlan brief

Fa0/11 notconnect 1 auto auto 10/100BaseTX

Fa0/12 notconnect 1 auto auto 10/100BaseTX VLAN Name Status Ports

Fa0/13 notconnect 1 auto auto 10/100BaseTX ---- -------------------------------- --------- -------------------------------

1 default active Fa0/7, Fa0/8, Fa0/9, Fa0/10 etage3(config-vlan)#end

Fa0/11, Fa0/12, Fa0/13, Fa0/14 etage3#

Fa0/15, Fa0/16, Fa0/17, Fa0/18 %SYS-5-CONFIG_I: Configured from console by console

Fa0/19, Fa0/20, Fa0/21, Fa0/22

Fa0/23, Fa0/24, Gig0/1, Gig0/2 etage3#show vlan brief

110 ADMIN active Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5, Fa0/6 VLAN Name Status Ports

120 DEVE active ---- -------------------------------- --------- -------------------------------

130 COMM active 1 default active Fa0/7, Fa0/8, Fa0/9, Fa0/10

1002 fddi-default active Fa0/11, Fa0/12, Fa0/13, Fa0/14

1003 token-ring-default active Fa0/15, Fa0/16, Fa0/17, Fa0/18

1004 fddinet-default active Fa0/19, Fa0/20, Fa0/21, Fa0/22

1005 trnet-default active Fa0/23, Fa0/24, Gig0/1, Gig0/2

etage3# 110 ADMIN active Fa0/1, Fa0/2, Fa0/3, Fa0/4

etage3#config Fa0/5, Fa0/6

Configuring from terminal, memory, or network [terminal]? 120 DEVE active

Enter configuration commands, one per line. End with CNTL/Z. 130 COMM active

etage3(config)#int range f0/7-15 1002 fddi-default active

etage3(config-if-range)#switchport mode access 1003 token-ring-default active

etage3(config-if-range)#vlan 120 1004 fddinet-default active

1005 trnet-default active Fa0/3 notconnect 110 auto auto 10/100BaseTX

etage3# Fa0/4 notconnect 110 auto auto 10/100BaseTX

etage3#config Fa0/5 notconnect 110 auto auto 10/100BaseTX

Configuring from terminal, memory, or network [terminal]? Fa0/6 notconnect 110 auto auto 10/100BaseTX

Enter configuration commands, one per line. End with CNTL/Z. Fa0/7 notconnect 120 auto auto 10/100BaseTX

etage3(config)#int range f0/7-12 Fa0/8 notconnect 120 auto auto 10/100BaseTX

etage3(config-if-range)#switchport mode access vlan 120 Fa0/9 notconnect 120 auto auto 10/100BaseTX

^ Fa0/10 notconnect 120 auto auto 10/100BaseTX

% Invalid input detected at '^' marker. Fa0/11 notconnect 120 auto auto 10/100BaseTX

Fa0/12 notconnect 120 auto auto 10/100BaseTX

etage3(config-if-range)#switchport mode access Fa0/13 notconnect 1 auto auto 10/100BaseTX

etage3(config-if-range)#switchport access vlan 120 Fa0/14 notconnect 1 auto auto 10/100BaseTX

etage3(config-if-range)#end Fa0/15 notconnect 1 auto auto 10/100BaseTX

etage3# Fa0/16 notconnect 1 auto auto 10/100BaseTX

%SYS-5-CONFIG_I: Configured from console by console Fa0/17 notconnect 1 auto auto 10/100BaseTX

Fa0/18 notconnect 1 auto auto 10/100BaseTX

etage3#show interface status Fa0/19 notconnect 1 auto auto 10/100BaseTX

Port Name Status Vlan Duplex Speed Type Fa0/20 notconnect 1 auto auto 10/100BaseTX

Fa0/1 notconnect 110 auto auto 10/100BaseTX Fa0/21 notconnect 1 auto auto 10/100BaseTX

Fa0/2 notconnect 110 auto auto 10/100BaseTX Fa0/22 notconnect 1 auto auto 10/100BaseTX
Fa0/23 notconnect 1 auto auto 10/100BaseTX

Fa0/24 notconnect 1 auto auto 10/100BaseTX

Gig0/1 notconnect 1 auto auto 10/100BaseTX

Gig0/2 notconnect 1 auto auto 10/100BaseTX

etage3#